Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
The ultimate Hydraulic Tail trailer!
11° ramp angle for loading low clearance equipment with ease
Super strong design lifts 25,000 pounds to loading dock height
Heavy-duty 18,000# winch standard with wireless remote for loading disabled equipment with ease (upgrades available)
Optional steel reinforced winch guard for added protection
Dual controls located on side of gooseneck for easy access
Protective cover plate on underside of gooseneck shields hydraulic system from road debris
Convenient load securement – combo chain slots/stake pockets on 24" centers with additional chain slots located in center of deck and on main tail
Smooth operation and easy maintenance (greaseable main and flip tail)
In-line manufacturing process assures consistent quality and dependable on-time delivery
Manufactured to the highest quality – ISO 9001/2008
A winch only remote is standard with every trailer. The remote shown is the optional 3-function remote that puts you in control of the winch and rear ramp so you can move around to see what’s happening as you load and unload.
Rugged steel reinforced deck handles 40 tons evenly distributed, 33 tons in 16 feet or 25 tons in 10 feet
Industry leading technology and design
Full width heavy-duty tail hinge is the most durable in the industry
Hydraulic tail lowers for ground loading and rises to accommodate transfer docks up to 60 inches in height
Traction tread plate with cleat bars on main and flip tail for easy track and rubber tire equipment loading
Hydraulic front power ramp features 10,000 lbs lifting capacity for quick and easy loading on upper deck–Mechanical locking mechanism holds ramp in place
Convenient fold-down step and grab handle located on both sides of the trailer are standard equipment
Stow your gear in this locking storage compartment conveniently located on both sides of the gooseneck
Options such as on-board digital scales and tire inflation systems can be added to your trailer for even greater convenience
IMPORTANT NOTE: Axle and legal load ratings are dependent upon multiple factors including federal, state and local regulations, GAWR, and tire ratings
©2015 Fontaine Trailer • LT-086 March 2015 • Specifications subject to change without notice • Photos may show optional equipment
www.fontaineheavyhaul.com • 205-467-6171
Main Beams: • All main longitudinal members fabricated with 100,000 lbs minimum yield steel flanges with 50,000 lbs webs
Capacity: • 40 tons evenly distributed• 33 tons in 16 feet• 25 tons in 10 feet
Dimensions: • Overall: 8' 6" width x 47' 11" length• Clear deck length: 38' 2"• Loaded deck height: 35"• Loaded fifth wheel height: 49"
Gooseneck: • Fixed full width gooseneck platform, 13/8" apitong floor• 85" swing radius (9' 8" overall gooseneck length)• 18,000 lbs winch with 75 feet of cable• Dual controls located on side of gooseneck• Hydraulic front ramp (8' 5") with 13° loading angle and 10,000 lbs lift capacity • J560 7-pin electrical connector
Deck design: • Flat level deck design• 13/8" nominal apitong flooring• 8" and 10" crossmembers on 18" centers• Stake pockets and double key hole chain slots on 24" centers and center deck chain slots
Axles: • 2 heavy-duty axles with 49" spread• 25,000 lbs nominal capacity per axle (GAWR determined by suspension type, brakes, tires and other components)
Brakes: • 121/4" X 71/2" with 6" autoslacks• Heavy duty brake drums, outboard mount• Spring brakes on 2 axles• 4S/2M system with diagnostic tool and cable
Hubs: • Hub-piloted 8-stud mountDrums: • Outboard cast drumsWheels and tires: • 6.75 X 17.5 Steel disc wheels with
235/75R 17.5 H-ply tiresSuspension: • Air ride with automatic height controlsElectrical system: • DOT sealed beam and harness with LED lights
• Marker lights and mid-turn signals; 3 stop, tail and turn lights per side on rear
Protective coating: • Shot blasted and cleaned prior to painting• Alkyd Primer for better paint adhesion• Highest quality 2-part polyurethane enamel fights corrosion to extend the life of your trailer
Tie downs: • Center tie downs to compliment outer chain key holesTail: • 11° angle for loading low clearance equipment
• Full width heavy-duty tail hinge • Traction tread plate with cleat bars for easy track and rubber tire equipment loading• Super strong design lifts 25,000 lbs to loading dock height of 60"
IMPORTANT NOTE: Axle and legal load ratings are dependent upon multiple factors including federal, state and local regulations, GAWR, and tire ratings.
Fontaine TraverseHT®
Specifications
Call 205.467.1833 for more information
Estimated trailer weight w/o options: 18,400 lbs ±3%
The ultimate Hydraulic Tail trailer!
47' 11"
25 tons
27' 9-3/4"
10' 0"
9' 8-1/2"
16"49"
36' 8-15/16"
22-9/16"
10' 5"
8-1/4"49"
35"49"
Tread Plate
Center Line Chain Slots
1-3/8" Apitong Tread Plate
102"
Cleat BarsTread PlateCombo Stake Pocket/Chain Slots
1-3/8" Apitong
Tool Box
Tread Plate
R 85"
BulkheadPocket
BulkheadPocket
18,000 LBWinch
Tool Box
Tread Plate
Loading Position With Air Bags Empty
13° Loading Position
Loading Hydraulic Ramp 10,000 LB Lift Capacity
33-1/2" Tail Lift Capacity25,000 LB 11° Loading
Position
Loading ControlLocation
49"
8' 5"
6'
205.467.1833 • www.fontaineheavyhaul.comSpecifications subject to change without notice • ©2015 Fontaine Heavy-Haul