Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SLIDER SC - SOFT CLOSE SLIDING SYSTEM / 03.17
SLIDING SYSTEM FURNITURE FITTINGS FOR SUPPORTED SLIDING DOORS
The Slider SC sliding system makes installation of just about any size possible. Whether it’s a new build or retrofit, the design has been carefully studied to provide easy installation and adaptation without any special fitting.
The floor running system features soft closing mechanisms integrated into the top track, with a maximum weight capacity of 50 kg per door. Silent and efficient rollers provide an effortless sliding motion.
The decorative vertical and horizontal door stiles provide a contemporary finish and act as an optional accessory to the timber door. Supplied packaged into 2 or 3 door openings as loose components or packaged opening sets, Häfele can provide simple and economical ordering options complete with either slimline or handle profiles. All kitsets are packed with vertical elements to 2750 mm. All horizontal rails supplied to opening widths as stated.
Slimline door sets Handle door sets
Description Length (mm) Cat. No.
2 door set 2000 944.02.080
2 door set 2500 944.02.081
3 door set 2700 944.02.082
3 door set 3600 944.02.083
Description Length (mm) Cat. No.
2 door set 2000 944.02.100
2 door set 2500 944.02.101
3 door set 2700 944.02.102
3 door set 3600 944.02.103
Door set exclude fitting set - please order separately Door set exclude fitting set - please order separately
Note:Each door set consists of: Double guide track x 1 piece Double bottom track with lip x 1 piece Horizontal door profile x 1 piece per door, handle profile x 2 pieces per door, slimline profile x 2 pieces per doorEnd extrusion x 2 pieces
KITSETS - THE SIMPLE ORDERING METHOD
Length (mm) Cat. No.
3700 403.90.937
4880 403.90.948
Length (mm) Cat. No.
3700 403.90.737
4880 403.90.748
Length (mm) Cat. No.
3700 403.90.738
4880 403.90.749
Length (mm) Cat. No.
2750 944.02.328
Packing 1 piece
Packing 1 piece
Packing 1 piece
Packing 1 piece
Note:Door height = opening height - 55 mm
Note:Use 6 mm thick spacer under rollers and guides when using slimline profile
79
50
1.3
3953
8
39
81.3
119
5381
54
Length (mm) Cat. No.
2750 126.35.913
Packing 1 piece
> Bottom rolling track for screw mounting> Aluminium, silver anodised
COMPONENTSDOUBLE BOTTOM TRACK
> Top guide track for screw mounting
> Aluminium, silver anodised
DOUBLE GUIDE TRACK
> Bottom rolling track for screw mounting, with lip return> Aluminium, silver anodised
DOUBLE BOTTOM TRACK WITH LIP
SLIMLINE VERTICAL DOOR STILE
HANDLE PROFILE
> Slimline vertical door stile, for frameless appearance> Aluminium, silver anodised> Suits board thickness up to 18mm
53.315.5
7.75
155
4
4 5
128.2º
FR
R1
R1
R1
22.1
18.5
WEDGE PROFILE FOR 16MM BOARD
Length (mm) Cat. No.
3700 944.02.060
Packing 1 piece
> Plastic> Black> For use with handle profile when using 16mm
board thickness
> Handle profile > Aluminium, silver anodised > Suits board thickness up to 18 mm
53.315.5
7.75
155
4
4 5
128.2º
FR
R1
R1
R1
22.1
18.5
33
819
6
3.5
2
2
4.0
12.8
1.7
33
819
6
3.5
2
2
SLIDER SC - SOFT CLOSE SLIDING SYSTEM / 03.17
Length (mm) Cat. No.
2750 944.02.627
Length (mm) Cat. No.
2750 944.02.427
Cat. No.
2 Door set 403.90.000
3 Door set 403.90.001
Additional soft close mechanism 403.90.011
Packing 1 piece
Packing 1 piece
Packing 1 set
2718
2530
1927
16.5
Length (mm) Cat. No.
2400 944.02.724
Packing 1 piece
6
15.876
Length (mm) Cat. No.
2700 944.02.302
Packing 1 piece
18.5
20.5
Note:Consider substrate weights and measures when calculating slidingpanel weights. Centre door position guide supplied only in 3 door set.
COMPONENTSEND PANEL EXTRUSIONHANDLE PROFILE
FITTING SET
SLIMLINE HORIZONTAL DOOR STILE
END PANEL EXTRUSION WITH RETURN
MID RAIL
> Aluminium, silver anodised> Suits board thickness up to 16 mm
> Decorative profile for top and bottom of door, optional> Aluminium, silver anodised> Suits board thickness from 18 mm
> End panel extrusion> Aluminium, silver anodised> Suits board thickness up to 18 mm
> End panel extrusion> Aluminium, silver anodised> Suits board thickness up to 18 mm
> End panel extrusion with return> Aluminium, silver anodised> Suits board thickness up to 16 mm
> Fitting set for sliding doors> Weight capacity per door 50 kg
Set consists of:> Bottom rollers> Top guides> Soft close mechanism
Length (mm) Cat. No.
2900 403.93.953
31.25
1021
16
31
Packing 1 piece
732.04.595 SOFT CLOSE SLIDING SYSTEM - 03.2017Häfele Australia Pty. Ltd. | 8 Monterey Road | Dandenong | Victoria 3175Phone: 1300 659 728 | Fax: (03) 9212 2001 | Email: [email protected] | www.hafele.com.au
Häfele New Zealand Ltd. | 16 Accent Drive | East Tamaki | Auckland 2013Phone: 0800 442 335 | Email: [email protected] | www.hafele.co.nz
HÄFELE LOCATIONS:
Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH
New Zealand I AUCKLAND I WELLINGTON I CHRISTCHURCH