2019/20 - Compressed Air Tools · Alliance Industrial Air Tools A A-2 FULL SPARE PARTS & SERVICE BACK-UP PRODUCT NO. IMAGE PRODUCT DESCRIPTION BARCODE AL-1204 13mm Reversible Drill/Screwdriver-800rpm

compressedairtools.com.au

1300 13 32 35

PRODUCT GUIDE & PRICE LIST

2019/20

INDUSTRIAL QUALITY AIR TOOLS

CARBIDE BURRS

TM

SURFACE PREP. TOOLS

CONTENTS

2019/20 PRODUCT GUIDE & PRICE LIST

Copyright © 2019. Specifications subject to change without notice. E&OE

A Alliance Industrial Air Tools A-1 – A-12

B Alliance Air Tool Accessories B-1 – B-9

C Alliance Abrasives & Cutting Tools C-1 – C-3

D Alliance Air Preparation Equipment D-1

E Alliance Air Hose & Fittings E-1 – E-12

F Alliance Display Stands F-1

G Alliance Construction Air Tools & Accessories G-1 – G-7

H Alliance Air Compressors & Accessories H-1 – H-2

I Chieftan Carbide Burrs I-1 – I-6

J Trelawny Surface Prep Tools & Accessories J-1 – J-5

K Price list K-1 – K-11

L Notes L-1 – L-3

M Conversion Table M-1

NOTE: PRICES & SPECIFICATIONS IN THIS PRODUCT GUIDE SUPERSEDE THOSE IN ALL PREVIOUS PUBLICATIONS

(PRICELIST AT BACK)

January 2019

Alliance Industrial Air Tools

A-1FULL SPARE PARTS & SERVICE BACK-UP

PRODUCT NO. IMAGE PRODUCT DESCRIPTION BARCODE

AG-4

100mm

Air Blow Gun - Metal Inlet Bush - Full Pressure Nozzle - 100 x 6mm stem - 24mm wide - 1/4" air inlet

AG-4L

250mm

Air Blow Gun - Metal Inlet Bush - Full Pressure Nozzle - 250 x 6mm stem - 24mm wide - 1/4" air inlet

AG-6 Inline Blow Gun - Metal Body - Rubber Tip - 60mm high - 28mm wide - 0.10kg - 1/4" air inlet

AL-1018 High Production Spray Gun - 1 litre Cup - 1.8mm Fluid Tip - 340L/min 12cfm - 30-70psi - 3/8" Fluid inlet - 1/4" male air inlet

AL-1020 Gravity Spray Gun - 600ml Cup - 1.4mm Fluid Tip - 312L/min 11cfm - 50-60psi - 3/8" Fluid inlet - 1/4" male air inlet

AL-1070 Professional Quality Finishing Spray Gun - 1 litre Cup - 2.0mm Fluid Tip - 340L/min 12cfm - 50-70psi - 3/8" Fluid inlet - 1/4" air inlet


AL-1200 10mm Straight Drill - Non reversible - Swivel Exhaust - Variable Speed - 2600rpm max. - 170L/Min 6cfm av. - 44mm wide - 0.93kg - 1/4" air inlet

AL-1202 10mm Reversible Angle Drill/Screwdriver - 1800rpm - 170L/min 6cfm av. - 38mm wide - 1.18kg - 1/4" air inlet

AL-1203 10mm Reversible Drill/Screwdriver - 1800rpm - 170L/min 6cfm av. - 40mm wide - 1.2kg - 1/4" air inlet

AL-1203K 10MM Reversible Drill/Screwdriver - Plastic Keyless Chuck - 1800rpm - 170L/min 6cfm av. - 44mm wide - 1.2kg - 1/4" air inlet

AL-1203MK 10mm Reversible Drill/Screwdriver - Metal Keyless Chuck - 1800rpm - 170L/Min 6cfm av. - 44mm wide - 1.2kg - 1/4" air inlet

AL-1203QC 1/4" Hex. Drive Screwdriver/Drill - Takes 1/4" hex. screwdriver and drill bits

- Reversible - No clutch - 1800rpm - 170L/min 6cfm av. - 40mm wide - 1.15kg - 1/4" air inlet

Copyright © 2019. Specifications and prices subject to change without notice. E&OE

2019/20 PRODUCT GUIDE & PRICELIST


2019/20 PRODUCT GUIDE & PRICELISTCopyright © 2019. Specifications and prices subject to change without notice. E&OE



AL-1204 13mm Reversible Drill/Screwdriver - 800rpm - 170L/min 6cfm av. - 42mm wide - 1.37kg - 1/4" air inlet

AL-1204K 13mm Reversible Drill/Screwdriver - Plastic Keyless Chuck - 800rpm - 170L/min 6cfm av. - 44mm wide - 1.37kg - 1/4" air inlet

AL-1204MK 13mm Reversible Drill/Screwdriver - Metal Keyless Chuck - 800rpm - 170L/min 6cfm av. - 44mm wide - 1.37kg - 1/4" air inlet

AL-1207 13mm Reversible Drill/Screwdriver - Composite Body - Noise reduced - 500rpm - 170L/min 6cfm av. - 45mm wide - 1.4kg - 1/4" air inlet

AL-1207MK 13mm Reversible

Drill/Screwdriver - Composite Body - Metal Keyless Chuck - Noise reduced - 500rpm - 170L/min 6cfm av. - 45mm wide - 1.45kg - 1/4" air inlet

AL-1213 Heavy Duty Tyre Buffer - Quick change chuck/Mandrel

- Swivel Exhaust - Variable Speed - 2600rpm max. - 85L/min 3cfm av. - 40mm wide


AL-1214 Adjustable Clutch Screwdriver - 1/4" hex. drive - 6mm capacity - 12Nm 8.8ft-lb - 1800rpm - 142L/Min 5cfm av. - 39mm wide - 1.1kg

AL-1215 Adjustable Clutch Screwdriver - 1/4" hex. drive - 8mm capacity - 16Nm 11.8ft-lb - 800rpm - 142L/min 5cfm av. - 41mm wide - 1.23kg

AL-1216 Adjustable Clutch Screwdriver - 1/4" hex. drive - 4mm capacity - 3.0NM 2.2ft-lb - 1700rpm Max. - 142L/min 5cfm av. - 0.66kg - 1/4" air inlet

AL-1218 Admustable Clutch Screwdriver - 1/4" hex. drive - 8mm capacity - 16NM 11.8ft-lb - 800rpm - 142L/min 5cfm av. - 40mm wide - 1.12kg

AL-1221 Auto Shut-Off Screwdriver - Push Start - Soft Grip - 1/4" hex. drive - 1400rpm - 550L/min 19.4cfm max - 0.7-4.9Nm








AL-1223L Auto Shut-Off

Screwdriver - Lever Start - Soft Grip - 1/4" hex. drive - 550rpm - 550L/min 19.4cfm max - 1.5-9.3Nm


AL-1224L Auto Shut-Off Screwdriver - Lever Start - Soft Grip - 1/4" hex. drive - 9mm capacity - 300rpm - 600L/min 21.2cfm max - 3.0-17.6Nm

AL-1241 Auto Shut-Off Screwdriver - Soft Grip - 3 air inlets - 1/4" hex. drive - 1700rpm - 280L/min 9.9cfm av - 0.7-5.0Nm






AL-1262 Impact Screwdriver - Twin Hammer - 1/4" hex. drive - 8000rpm - 60Nm - 130L/min 4.6cfm av - 1.2kg - 1/4" air inlet

AL-1265 Impact Screwdriver - Double Hammer - 1/4" hex. drive - 1000rpm - 47Nm - 120L/min 4.5cfm av

AL-1268 19mm Reversible D-Handle Drill - 1000rpm - 424L/min 15cfm - 6.3kg - 3/8" inlet





AL-1301K 1/8" micro Die Grinder Kit - Roll Throttle - 1/8" collet - 3mm option - 54000rpm - 57L/min 2.0cfm - 0.2kg - 16mm wide

AL-1305 1/8" micro Angle Die Grinder Kit - Roll throttle - 1/8" standard collet - 3mm option - 35000rpm - 160L/min 6cfm - 1/4" air inlet - 25mm wide

AL-1310 1/4" Mini Die Grinder - Variable Speed - Swivel Exhaust - 1/4" standard collet - 6mm, 1/8", 3mm options - 25000rpm max. - 284L/min 10cfm

AL-1310K 1/4" Mini Die Grinder Kit - 10 mounted stones - 1/4" Standard Collet - 6mm, 1/8", 3mm options - 38mm wide - 0.43kg - 1/4" inlet - 2842L/min 10cfm

AL-1312 1/4" Mini Angle Die Grinder - Variable Speed - Swivel Exhaust - 1/4" standard collet - 6mm, 1/8", 3mm options - 22000rpm max. - 340L/min 12cfm

AL-1312K 1/4" Mini Angle Die Grinder Kit - 10 mounted stones - 5 x 50mm S.C. Discs - Ez-lock mandrel - 50mm backing pad - 1/4" standard collet - N-Series Adaptor - 340L/min 12cfm


AL-1320 1/4" Die Grinder - Variable Speed - Swivel Exhaust - 1/4" standard collet - 6mm, 1/8", 3mm options - 23000rpm max. - 425L/min 15cfm

AL-1320K 1/4" Die Grinder Kit - 10 mounted stones - 1/4" standard collet - N-Series Adaptor - 6mm, 1/8", 3mm options - 0.66kg - 1/4" inlet - N-Series Adaptor

AL-1321 1/4" Extended Die Grinder - Variable Speed - Swivel Exhaust - 1/4" standard collet - 6mm, 1/8", 3mm options - 20000rpm max.

AL-1322 1/4" Angle Die Grinder - Variable Speed - Swivel Exhaust - 1/4" standard collet - 6mm, 1/8", 3mm options - 18000rpm max.

AL-1322K 1/4" Angle Die Grinder Kit - 10 mounted stones - 5 x 50mm + 5 x 75mm S.C. Discs

- 2 x Ez-lock mandrels - 50 + 70mm backing pads - 1/4" standard collet - N-Series Adaptor

AL-1330 50mm Angle Grinder/Sander - Variable Speed - Swivel Exhaust - 50 x 2.8 x 9.6 disc - 50 hook & loop pad - 15000rpm max. - 425L/min 15cfm






AL-1330R 50mm Quick Change Disc Sander - Variable Speed - Swivel Exhaust - 50mm Ez-Loc Rubber Pad

- 1/4"-20 spindle - 15000rpm max - 425L/min 15cfm

AL-1340 75mm Panel Cutter - Variable Speed - Swivel Exhaust - 75 x 1.6 x 9.53CH disc - 1.2mm cut capacity - 21000rpm max. - 240L/min 12cfm max. - 0.8kg - 83mm wide

AL-1344 100mm Heavy Duty Angle Grinder - Heavy duty bevel gears - 100 x 6 x 16CH disc - 3/8"-24 spindle - 13600rpm - 0.7kW 0.95hp - 963L/min 34cfm max. - 1.3kg - 1/4" air inlet

AL-1345 125mm Heavy Duty Angle Grinder - Lever throttle - Heavy duty bevel gears - 125 x 6 x 22.2CH disc - m14 x 2.0 spindle - 10900rpm - 0.7kW 0.95hp - 936L/min 34cfm max. - 1.4kg - 1/4" air inlet

AL-1345R 125mm Heavy Duty Angle Grinder - Roll throttle - Heavy duty bevel gears - 125 x 1 x 22.2CH disc - m14 x 2.0 spindle - 10900rpm - 0.7kW 0.95hp - 936L/min 34cfm max. - 1.5kg - 1/4" air inlet

AL-1345W 125mm Heavy Duty Wet Grinder - Open guard - Heavy duty bevel gears - 125 x 1 x 22.2CH disc - m14 x 2.0 spindle - 10900rpm - 0.7kW 0.95hp - 936L/min 34cfm max. - 2.95kg - 1/4" air inlet


AL-1347 180mm Heavy Duty Angle Grinder - Heavy duty bevel gears - 180 x 6 x 22.2CH disc - m14 x 2.0 spindle - 7600rpm - 1.5kW 2.0hp - 1614L/min 57cfm max. - 3.7kg - 3/8" air inlet - 267mm wide

AL-1349 230mm Heavy Duty Angle Grinder - Heavy duty bevel gears - 230 x 6 x 22.2CH disc - m14 x 2.0 spindle - 5900rpm - 1.87kW 2.5hp - 1897L/min 67cfm max. - 3.95kg - 3/8" air inlet

AL-1349W 230mm Heavy Duty Wet Grinder - Heavy duty bevel gears - 230 x 22.2CH disc - m14 x 2.0 spindle - 5900rpm - 1.87kW 2.5hp - 1897L/min 67cfm max. - 4.00kg - 1/2" air inlet

AL-1359 230mm Heavy Duty Vertical Grinder - 230 x 6 x 22.2CH disc - 5/8"-11 spindle - 6000rpm - 2.25kW 3.0hp - 2249L/min 81cfm max. - 4.97kg - 1/2" air inlet

AL-1383L Extended Die/75mm Straight Grinder - Safety Lever Throttle - Side Exhaust - 6mm collet - 1/4" collet option - 3/8"-16 spindle - 75mm wheel guard - 14600rpm - 852L/min 30cfm

AL-1383R WARNING

Read special safety instructions in box before using this tool.

Extended Die/75mm Straight Grinder - Roll Throttle - Side Exhaust - 6mm collet - 1/4" collet option - 3/8"-16 spindle - 75mm wheel guard - 14600rpm - 852L/min 30cfm





AL-1385L 125mm Straight Grinder - Safety Lever Throttle - Side Exhaust - 125 x 20 x 12.7CH wheel - 1/2"-12 spindle - 7600rpm - 765L/min 27cfm

AL-1385R

WARNINGRead special safety instructions

in box before using this tool.

125mm Straight Grinder - Roll Throttle - Side Exhaust - 125 x 20 x 12.7CH wheel - 1/2"-12 spindle - 7600rpm - 765L/min 27cfm

AL-1386L 150mm Straight Grinder - Safety Lever Throttle - Side Exhaust - 150 x 25 x 15.88CH wheel

- 5/8"-11 spindle - 6300rpm - 850L/min 30cfm

AL-1386R 150mm Straight Grinder - Roll Throttle - Side Exhaust - 150 x 25 x 15.88CH wheel


AL-1500 150mm Bar Handle Sander - Dual Action - PSA or Hook Pad - Variable Speed - 10000rpm max. - 5mm orbit - 397L/min 14cfm - 1.8kg

AL-1501 150mm Palm Grip Sander - Non Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 5mm orbit - Variable Speed - 10000rpm max. - 0.90kg incl. pad - 340L/min 12cfm


AL-1502 150mm Palm Grip Sander - Self Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 3mm orbit - Variable Speed - 10000rpm max. - 340L/min 12cfm

AL-1503 150mm Palm Grip Sander - Central Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 3mm orbit - Variable Speed - 10000rpm max. - 0.90kg incl. pad - 340L/min 12cfm

AL-1507 75mm Palm Grip Sander - Non Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 2.5mm orbit - Variable Speed - 12000rpm max. - 340L/min 12cfm

AL-1508 150mm Palm Grip Sander - Central Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 2.5mm orbit - Variable Speed - 12000rpm max. - 0.90kg incl. pad - 340L/min 12cfm

AL-1509 150mm Palm Grip Sander - Central Vacuum - Light Weight Skirt - Hook Face Pad - Random Orbital - 5mm orbit - Variable Speed - 12000rpm max. - 0.90kg incl. pad - 340L/min 12cfm

AL-1511 75 x 100mm Jitterburg Sander - Non Vacuum - Hook Face Pad - 3.2mm orbit - Variable Speed - 10000rpm max. - 45L/min 1.6cfm av. - 0.8/sec² vib. - 1/4" inlet - 3/8"ID air hose - 0.70kg

WARNINGRead special safety instructions

in box before using this tool.






AL-1525 180mm Angle Disc Sander - Plastic Backing Disc for Fibre Discs

- 180 x 22.2CH disc - 5/8"-11 spindle - 4500rpm - 1/4" air inlet - 581L/min 20.5cfm - 230mm wide

AL-1551 125mm High Speed Disc Sander - Composite Body - Noise Reduced - 75, 115, 125mm Fibre Back-up Discs

- 125 x 22.2CH discs - 16000rpm - 170L/min 6cfm

AL-1552 50mm Quick Change Disc Sander - Composite Body - Noise Reduced - 50mm Ez-Loc Rubber Pad


AL-1553 75mm Quick Change Disc Sander - Composite Body - Noise Reduced - 75mm Ez-Loc Rubber Pad

- 1/4"-20 spindle - 16000rpm - 170L/min 6cfm-

AL-1554 75mm Orbital Action Sander - Composite Body - Noise Reduced - 75mm Hook Face Pad - 5/16"-24 spindle - 16000rpm - 1/4" inlet - 170L/min 6cfm

AL-1555 75mm Single Action Polisher - Composite Body - Noise Reduced - 75mm Hook Face Pad



AL-1556 75mm Quick Change Disc Polisher - Composite Body - Noise Reduced - 75mm Ez-Loc Rubber Pad


AL-1557 180mm Angle Polisher - Plastic Backing Disc for Polishing Pads

- 5/8-11" spindle - 2500rpm - 1/4" air inlet - 552L/min 19.5cfm

AL-1620 Wonder Gun - Vacuum/Blow - Quick Change Lever - 1200mm Vac. Hose - 0.50kg - 1/4" air inlet - 102L/min 3.6cfm

AL-1781 Reciprocating Saw - 90mm x 24TPI std. blade - 14, 18, 32TPI options - 1.6mm cut capacity - 10mm stroke - 10000spm - 340L/min 12cfm - 1/4" inlet

AL-1850 12mm Pistol Tapper - m2-m12 capacity - 250rpm - 1 x tap holder - 1.5kg - 3/8" air inlet - 400L/min 14cfm

AL-1953 Sheet Metal Shear - Double Blade - Swivel Exhaust - 0.9mm capacity - 2600spm - 6mm stroke - 1/4" air inlet - 340L/min 12cfm





AL-1965 Sheet Metal Nibbler - Push Type - 1.5mm capacity - 2500spm - 4.5mm cutting width - 1.0kg - 1/4" air inlet - 96L/min 3.3cfm av.

AL-2211 3/8" Square Drive Impact Wrench - 14mm bolt capacity - 271Nm 200ft-lb - 1.35kg - 1/4" air inlet - 10mmID air hose - 71L/min 2.5cfm av.

AL-2251 Butterfly Throttle Impact Wrench - 3/8" square drive - 10mm bolt capacity - 136Nm 100ft-lb - 1.75kg - 1/4" air inlet - 10mmID air hose - 71L/min 2.5cfm av. - Rocking dog clutch - Top exhaust

AL-2314 1/4" Mini Ratchet Wrench - 250rpm - 33Nm 25ft-lb - 0.5kg - 1/4" air inlet - 85L/min 3cfm - 30mm wide

AL-2315 3/8" Mini Ratchet Wrench - 250rpm - 33Nm 25ft-lb - 0.5kg - 1/4" air inlet - 85L/min 3cfm - 45mm wide

AL-2316-15 Mini Through Ratchet Wrench - 15mm A/F hex. ring - 450rpm - 40Nm 30ft-lb - 1/4" air inlet - 127L/min 4.5cfm


AL-2316K Mini Through Ratchet Kit - 17mm A/F hex. ring - 450rpm - 40Nm 30ft-lb - 10 x insert sockets - 3 x square drive anvil inserts

- 10 x driver bits - magnetic bit holder

AL-2340 3/8" Heavy Duty Ratchet Wrench - Twin Pawl Head - 160rpm - 81Nm 60ft-lb - 39mm wide - 1.18kg - 1/4" air inlet - 114L/min 4cfm

AL-2345 1/2" Heavy Duty Ratchet Wrench - Twin Pawl Head - 160rpm - 81Nm 60ft-lb - 39mm wide - 1.19kg - 1/4" air inlet - 114L/min 4cfm

AL-2352 COMMANDO Super Duty mini 1/2" Impact Wrench - Aluminium Body - mumbo Hammer Clutch - 18mm bolt capacity - 678Nm 500ft-lb - 1.55kg - 1/4" air inlet - 10mm ID air hose - 133L/min 4.7cfm av.

AL-2359 Heavy Duty 1/2" Impact Wrench - Aluminium Body - Twin Hammer Clutch - 19mm bolt capacity - 814Nm 600ft-lb - 2.8kg - 1/4" air inlet - 10mm ID air hose - 113L/min 4.0cfm av.

AL-2359-2 Heavy Duty 1/2" Impact Wrench 2" Extended Anvil - Twin Hammer Clutch - 19mm bolt capacity - 814Nm 600ft-lb - 2.96kg - 1/4" air inlet - 10mm ID air hose - 113L/min 4.0cfm av.






AL-2360 WARRIOR 1 Super Duty 1/2" Impact Wrench - Composite Body - Twin Hammer Clutch - 20mm bolt capacity - 1112Nm 820ft-lb - 2.1kg - 1/4" air inlet - 10mm ID air hose - 190L/min 6.7cfm av.

AL-2360-2

WARRIOR 2 Super Duty 1/2" Impact Wrench 2" Extended Anvil - Twin Hammer Clutch - 20mm bolt capacity - 1053Nm 780ft-lb - 2.3kg - 1/4" air inlet - 10mm ID air hose - 190L/min 6.7cfm av.

AL-2423 3/4" Standard Duty Impact Wrench - Aluminium Body - Twin Hammer Clutch - 25mm bolt capacity - 1085Nm 800ft-lb - 4.55kg - 1/4" air inlet - 12mm ID air hose - 198L/min 7.0cfm av.

AL-2423-6 3/4" Standard Duty Impact Wrench 6" Extended Anvil - Twin Hammer Clutch - 25mm bolt capacity - 1085Nm 800ft-lb - 4.99kg - 1/4" air inlet - 12mm ID air hose - 198L/min 7.0cfm av.

AL-2450 Palm Grip Bump Hammer - Push to Start - Two different tips - 1000bpm - 1.10kg - 1/4" air inlet - 63mm wide - 85L/min 3cfm

AL-2480 Engraving Pen - Hardened Tip - 1480mm hose - 0.25kg - 1/4" air inlet - 18mm wide - Spare tip C2480-17 - 283L/min 10cfm max


AL-2538 1" D-Handle Impact Wrench - Aluminium Body - Twin Hammer Clutch - 38mm bolt capacity - 2441Nm 1800ft-lb - 10.65kg - 1/2" air inlet - 20mm ID air hose - 340L/min 12.0cfm av.

AL-2538-6 1" D-Handle Impact Wrench 6" Extended Anvil - Aluminium Body - Twin Hammer Clutch - 38mm bolt capacity - 2441Nm 1800ft-lb - 11.85kg - 1/2" air inlet - 20mm ID air hose - 340L/min 12.0cfm av.

AL-2538P 1" Pistol Grip Impact Wrench - Aluminium Body - Twin Hammer Clutch - 35mm bolt capacity - 2441Nm 1800ft-lb - 10.62kg - 1/2" air inlet - 20mm ID air hose - 340L/min 12.0cfm av.

AL-2538P-6 1" Pistol Grip Impact Wrench 6" Extended Anvil - Aluminium Body - Twin Hammer Clutch - 35mm bolt capacity - 2441Nm 1800ft-lb - 11.82kg - 1/2" air inlet - 20mm ID air hose - 340L/min 12.0cfm av.

AL-2545 1" D-Handle Impact Wrench - Aluminium Body - Twin Hammer Clutch - 45mm bolt capacity - 3390Nm 2500ft-lb - 15.30kg - 20mm ID air hose - 411L/min 14.5cfm av.

AL-2545-8 1" D-Handle Impact Wrench 8" Extended Anvil - Aluminium Body - Twin Hammer Clutch - 45mm bolt capacity - 3390Nm 2500ft-lb - 16.80kg - 1/2" air inlet - 20mm ID air hose - 411L/min 14.5cfm av.





AL-2655 1-1/2" Square Drive Impact Wrench - Aluminium Body - Twin Hammer Clutch - 50mm bolt capacity - 4068Nm 3000ft-lb - 18.6kg - 1/2" air inlet - 20mm ID air hose - 453L/min 16cfm av.

AL-2655-8 1-1/2" Square Drive Impact Wrench 8" Extended Anvil - Aluminium Body - Twin Hammer Clutch - 50mm bolt capacity - 4068Nm 3000ft-lb - 19.8kg - 20mm ID air hose - 453L/min 16cfm av.

AL-3101 3/16" Blind Riveter - Air/Hydraulic - 3/16" 4.8mm capacity - 3/32", 1/8", 5/32", 3/16" std. nose pieces

- 720kg traction - 1.3kg - 1/4" air inlet

AL-3103 1/4" Blind Riveter

- Air/Hydraulic - Non Vacuum - 1/4" 6.4mm capacity 3/32", 1/8", 5/32", 3/16", 7/32", 3/16", 7/32", 1/4" std. nose pieces

- 1589kg traction - 19mm stroke - 2.07kg - 1/4" air inlet

AL-3114 10mm Rivet Nut Tool - M10 capacity - M10 std. mandrel - Optional mandrels: M6, M8, 1/4", 5/16", 3/8"

- 450rpm - 1.8kg - 1/4" air inlet - 226L/min 8cfm

AL-3115 12mm Rivet Nut Tool - M10 capacity - M10 std. mandrel - Optional mandrels: m10, 7/16"

- 100rpm - 1.9kg - 1/4" air inlet - 226L/min 8cfm


AL-3118 Air/Hydraulic Rivet Nut Tool - M4-M10 capacity - Incl. M4, M5, M6, M8, M10 std. mandrels

- 6.2bar 90psi pressure - 1.5kg - 1/4" air inlet - 78mm wide

AL-3120 Professional 3/16" Blind Riveter - Air/Hydraulic - 3/16" 4.8mm st. Capacity - 3/32", 1/8", 5/32", 3/16" available nose pieces

- 744kg traction - 1.25kg

AL-3121 Professional 1/4" Blind Riveter - Air/Hydraulic - 1/4" 6.4mm st. capacity - 1/8", 5/32", 3/16" 1/4" available nose pieces


AL-3122 Super Duty 1/4" Blind Riveter - Air/Hydraulic - 1/4" 6.4mm st. structural capacity

- 1/8", 5/32", 3/16" 1/4" available nose pieces


AL-3123 Professional Rivet Nut Tool - Air/Hydraulic - Available nose pieces: M3, M4, M5, M6, M8, M10, M12, 5/32", 3/16", 1/4", 5/16" - steel max m10 - stainless

- 18.5kN traction - 1.65kg

AL-3254 Caulking Gun - Aluminium Body - Takes standard 310ml cartridges

- 3-6.2bar 45-90psi - 1.12kg - 1/4" air inlet






AL-3256 Caulking Gun - Aluminium Body - Fully adjustable - Takes up to 600ml sausages

- 10bar 145psi - 0.95kg - 1/4" air inlet

AL-3257 Caulking Gun - Aluminium Body - Fully adjustable - Takes standard 310ml cartridges

- 10bar 145psi - 0.65kg - 1/4" air inlet

AL-3404 Professional Tyre Inflator - Driveway Quality - Indiv. Calibrated - Indiv. Numbered - 10.3bar 150psi - 1.15kg - 1/4" air inlet

AL-4200 Hammer - 2 chisels - 10.2mm dia. shank - 66mm stroke - 3000bpm - 1.7kg - 52mm wide - 1/4" air inlet - 156L/min 5.5cfm av

AL-4202 Hammer - 5 chisels - 10.2mm dia. shank - 94mm stroke - 2000bpm - 2.0kg - 53mm wide - 1/4" air inlet - 170L/min 6cfm av

AL-4205 Pistol Lockseam Hammer - Vibration Reduced - 70mm stroke - 3000bpm - 2.4kg - 1/4" air inlet - 10mm ID air hose - 165L/min 5.8cmf av


AL-4780 Sealant Cutter - Rear Exhaust - 57mm offset blade - 20000spm - 85L/min 3.0cfm - 180mm long

AL-4800 Sheet Metal Punch & Flange Tool - Air/Hydraulic - 5mmø x 1.6 cap. punch - 22 x 12 x 0.8 flange - 1.3kg - 54mm wide - 1/4" air inlet

AL-5010 10mm Belt Sander - 10 x 330mm belt - 1055m/min - 0.9kg - 86mm wide - 1/4" ID air inlet - 10mm ID air hose - 402L/min 14.2cfm av.

AL-5020 20mm Belt Sander - 20 x 520mm belt - 2500m/min - 1.2kg - 91mm wide - 1/4" air inlet - 10mm ID air hose - 538L/min 19cfm av.

AL-5030 30mm Belt Sander - 30 x 540mm belt - 1600m/min - 1.6kg - 110mm wide - 1/4" air inlet - 10mm ID air hose - 708L/min 25cfm max.

AL-6000 Heavy Duty Needle Scaler - Cast Aluminium Body - 28 x 3mm needles - 4500bpm - 3.5kg - 64mm wide - 1/4" air inlet - 340L/min 12cfm



FULL SPARE PARTS & SERVICE BACK-UP A-12


AL-7000 Pistol Grip Needle Scaler - 19 x 3mm needles - 3700bpm - 2.6kg - 52mm wide - 1/4" air inlet - 10mm ID air hose - 285L/min 10cfm

AL-7010 Pistol Grip Chisel Scaler - 12mm sq. shank - 2700bpm - 2.2kg - 52mm wide - 1/4" air inlet - 10mm ID air hose - 85L/min 3.0cfm

AL-7100 Straight Needle Scaler - 12 x 3mm needles - 4300bpm - 1.6kg - 39mm wide - 1/4" air inlet - 10mm ID air hose - 95L/min 3.4cfm

AL-7110 Straight Chisel Scaler - 12mm sq. shank - 4200bpm - 1.6kg - 39mm wide - 1/4" air inlet - 10mm ID air hose - 95L/min 3.4cfm

PT-252 1/2” SQ. DR. Impact Wrench - 20mm bolt capacity - 850Nm 627ft lb - 2.1kg - 74mm wide - 1/4" air inlet - 144L/min 5.1cfm - SS coated hammer housing

PT-262 3/4” SQ. DR. Impact Wrench - 24mm bolt capacity - 1650Nm 1217ft lb - 3.8kg - 90mm wide - 3/8” air inlet - 228L/min 8.0cfm - SS coated hammer housing

Alliance Air Tool Accessories




AA-100 Hexagon Bit Holder - Takes 1/4" hex shank screwdriver bits and drill bits

- 3/8"-24 mount

AA-406EM Eraser Wheel Mandrel - 1/4" shank x 5/16-24 female thread

- Used with AA-406ES and AA-406ET for running in tools such as AL-1200 or similar.

AA-406ES Eraser Wheel - 85mm dia. - 5/16"-24 male thread

AA-406ET Toothed Eraser Wheel - 90mm dia. - 5/16"-24 male thread

AA-5000 Needle Scaler Attachment - 19 x 3mm needles - Converts Alliance AL-4200, AL-4201, AL-4202 and similar air hammers into needle scalers.

AA-5001 Chisel Quick Change Retainer - Takes 10.2mm round shank chisels

- Alternative to AA-400-8 retainer spring on AL-4200, AL-4201, AL4202 and similar air hammers.


AA-5002 (AA-400-8)

Chisel Retaining Spring - Used for retaining chisels on Alliance AL-4200, AL-4201, AL-4202 and similar air hammers.

AA-5007 1/4" In-Line Mini Oiler - 1/4"mBSP x 1/4"FBSP

AA-5011 1/4" Speed Regulator - 1/4"mBSP x 1/4"FBSP

AA-5012 1/4" In-Line Regulator - Twist Type - 1/4"mBSP x 1/4"FBSP

AA-5014 Clip-on Tyre Chuck - Sealing - 1/4" air inlet

AA-5017 Dual Tyre Chuck - Sealing - 1/4" air inlet - 265mm long

B-1



B-2


AA-6000 Tool Balancer - Aluminium Case - Adjustable - 0.5-1.5kg capacity - 1.3m cable travel - 0.73kg net weight - 200 x 136 x 52mm o/a

AA-6001 Tool Balancer - Aluminium Case - Adjustable - 1.0-3.0kg capacity - 1.3m cable travel - 1.73kg net weight - 340 x 148 x 74mm o/a

AA-6002 Tool Balancer - Aluminium Case - Adjustable - 3.0-5.0kg capacity - 1.3m cable travel - 1.73kg net weight

AA-6003 Tool Balancer - Aluminium Case - Adjustable - 5.0-9.0kg capacity - 1.3m cable travel - 3.6kg net weight

AA-60726 150mm Vinyl Face Orbital Sanding Pad - 6 Hole - 5/16"-24 male thread - Suits Alliance AL-1502, AL-1503, AL-1508, AL-1509 and similar 150mm sanders

AA-60796 150mm Hook & Loop Orbital Sanding Pad - 7 Hole - 5/16"-24 male thread - Suits Alliance AL-1502, AL-1503, AL-1508, AL-1509 and similar 150mm sanders


AA-60799 150mm Hook & Loop Orbital Sanding Pad - 15 Hole - 5/16"-24 male thread - Suits Alliance AL-1502, AL-1503, AL-1508, AL-1509 and similar 150mm sanders

AA-60805 (136A-5V)

125mm Hook & Loop Disc Sanding Pad - 5/8"-11 female thread - 10,000rpm - Suits Alliance AL-1525, AL-1557 Shinano SI-2026

AA-60805M M14 x 2.0F

125mm Hook & Loop Disc Sanding Pad - M14 x 2.0 female thread - 10,000rpm

AA-60806 (136A-6V)

150mm Hook & Loop Disc Sanding Pad - 5/8"-11 female thread - 10,000rpm - Suits Alliance AL-1525, AL-1557

AA-60806M M14 x 2.0F

150mm Hook & Loop Disc Sanding Pad - M14 x 2.0 female thread - 10,000rpm

AA-60807 (136A-7V)

180mm Hook & Loop Disc Sanding Pad - 5/8"-11 female thread - 10,000rpm - Suits Alliance AL-1525, AL-1557 AL-1359 Shinano SI-2300, SI-2351





AA-60807M M14 x 2.0F

180mm Hook & Loop Disc Sanding Pad - M14 x 2.0 female thread

AA-60808 (136A-8V)

200mm Hook & Loop Disc Sanding Pad - 5/8"-11 female thread - 10,000rpm - Suits Alliance AL-1525, AL-1557 AL-1359

AA-60808M 200mm Hook & Loop Disc Sanding Pad - M14 x 2.0 female thread

AA-60812 (RHS5500-14MM)

125mm Spiralcool Disc Sanding Pad - High speed - M14 x 2.0 female thread - 13000rpm - Made in USA

AA-60814 (RHS500-R)

125mm Spiralcool Disc Sanding Pad - High speed - 5/8"-11 female thread - 13000rpm - Made in USA

AA-60815 (R700-14MM)

178mm Spiralcool Disc Sanding Pad - Medium Rubber - M14 x 2.0 female thread - 7000rpm - Made in USA


AA-60816 (R700-R)

178mm Spiralcool Disc Sanding Pad - Medium Rubber - 5/8"-11 female thread - 7000rpm - Made in USA

AA-60817(H900-R14200)

230mm Spiralcool Disc Sanding Pad - Hard Rubber - M14 x 2.0 female thread - 6500rpm - Made in USA

AA-60818 (H900-R)

230mm Spiralcool Disc Sanding Pad - Hard Rubber - 5/8"-11 female thread - 6500rpm - Made in USA

AA-60819 (103-10125)

Spiralcool Centre Nut - M10 x 1.25 thread

AA-60820 (103-10150)


AA-60821 (102)

Spiralcool Centre Nut - 5/8"-11 thread

B-3



B-4


AA-60822 (102-14MM)


AA-60823 (102SPWR)

Spiralcool Pin Spanner - For spiralcool centre nuts

AA-2003 (C2511)

4 Piece Chisel Set - 125mm long - 10.2mmØ shank - Made in Taiwan

AA-801 Automotive Tie Rod Tool - 115mm long - 30mmØ - 10.2mmØ shank - Made in Japan

AA-802 Automotive Tail Pipe Cutter - 165mm long - 32mm wide - 10.2mmØ shank - Made in Japan

AA-803 Automotive Fork Chisel - 155mm long - 30mm wide - 16mm opening - 10.2mmØ shank - Made in Japan


AA-803M Automotive Fork Chisel - 174mm long - 41mm wide - 25mm opening - 10.2mmØ shank - Made in Japan

AA-804 Automotive Bushing Remover - 150mm long - 35mm wide - 10.2mmØ shank - Made in Japan

AA-805 Automotive Cranked Wide Chisel - 166mm long - 32mm wide - 10.2mmØ shank - Made in Japan

AA-806 Automotive Bushing Splitter - 166mm long - 13mm wide - 10.2mmØ shank - Made in Japan

AA-807 Automotive Sheet Metal Cutter - 152mm long - 17mm wide - 10.2mmØ shank - Made in Japan

AA-808 Automotive Muffler Cutter - 172mm long - 16mm wide - 10.2mmØ shank - Made in Japan





AA-809 Automotive Double Edge Panel Cutter - 168mm long - 18mm wide - 10.2mmØ shank - Made in Japan

AA-810 Automotive Flat Chisel - 176mm long - 19mm wide - 10.2mmØ shank - Made in Japan

AA-811 Automotive Long Flat Chisel - 229mm long - 19mm wide - 10.2mmØ shank - Made in Japan

AA-812 Automotive Tapered Punch - 168mm long - 13mmØ - 10.2mmØ shank - Made in Japan

AA-813 Automotive Rivet Cutter Chisel - 152mm long - 20mm wide - 10.2mmØ shank - Made in Japan

AA-814 Automotive Chisel Blank - 180mm long - 13mmØ - 10.2mmØ shank - Made in Japan


AA-815 Automotive Spot Weld Breaker - 146mm long - 19mm wide - 10.2mmØ shank - Made in Japan

AA-816 Automotive Sheet Metal Cutter - 146mm long - 19mm wide - 10.2mmØ shank - Made in Japan

AA-817 Automotive Bushing Driver - 127mm long - 33mmØ - 10.2mmØ shank - Made in Japan

AA-818 Automotive Cranked Flat Chisel - 178mm long - 20mm wide - 10.2mmØ shank - Made in Japan

AA-819 Automotive Sheet Metal Punch - 147mm long - 13mmØ - 10.2mmØ shank - Made in Japan

AA-820 Automotive Panel Crimper - 183mm long - 90mm wide - 10.2mmØ shank - Made in Japan

B-5




AA-821 Automotive Smoothing Tool - 102mm long - 30mmØ - 10.2mmØ shank - Made in Japan

AA-822 Automotive Straight Punch - 148mm long - 9mmØ - 10.2mmØ shank - Made in Japan

AA-823 Automotive Paint Scraper - 178mm long - 63mm wide - 10.2mmØ shank - Made in Japan

AA-824 Automotive Shock Absorber Chisel - 145mm long - 19mm wide - 10.2mmØ shank - Made in Japan

AA-825 Automotive Moil Point - 178mm long - 13mmØ - 10.2mmØ shank - Made in Japan

AA-D42 Spindle Adaptor - 7/16"-20 female - 1/4"-20 male


AA-D43 Spindle Adaptor - Trimcut male - 7/16"-20 female

AA-D44 Spindle Adaptor - 5/8"-11 female - m14 x 2.0 male

AA-D45 Spindle Adaptor - m14 x 2.0 female - m14 x 2.0 male

AA-D46 Spindle Adaptor - m14 x 2.0 female - 5/8" -11 male

AA-EM4 Ez-Lok Mandrel - 1/4" shank 10 Ez-Lok male thread

- Used with AA-RD50 and AA-RD75 for running in tools such as AL-1202 and AL-1322 with drill chucks or collets.

- Also suits Roloc

AA-TM4 Trimkut Mandrel - 1/4" shank to Trimkut male thread

- Used with Trimkut abrasive discs for running in tools such as AL-1202 and AL-1322 with drill chucks or collets.

B-6





AA-KL1238 Plastic Keyless Chuck - 13mm capacity - 3/8"-24 mount

AA-KL3838 Plastic Keyless Chuck - 10mm capacity - 3/8"-24 mount

AA-KP1238M Matal Keyless Chuck - 13mm capacity - 3/8"-24 mount

AA-KP3838M Matal Keyless Chuck - 10mm capacity - 3/8"-24 mount

AA-RC1238 Light Duty Keyed Chuck - 13mm capacity - 3/8”-24 mount - CK-12 Key

AA-RC3838H Heavy Duty Keyed Chuck - 10mm capacity - 3/8”-24 mount - CK-12 Key


AA-RC3838L Light Duty Keyed Chuck - 10mm capacity - 3/8”-24 mount - CK-38L Key

AA-RD050 50mm Rubber Ez-Lok Pad - 1/4"-20 female thread - Suites AL-1552 and similar quick change disc sanders.

AA-RD075 75mm Rubber Ez-Lok Pad - 1/4"-20 female thread - Suites AL-1553 and similar quick change sanders and polishers.

ACO-1000 1 litre Air Compressor Oil - For maximum performance and service life in piston compressors.

ACO-5000 5 litre Air Compressor Oil - For maximum performance and service life in piston compressors.

AS-6101 (AL-D3M)

1/2" Square Drive Impact Socket Set - 3 piece - Chrome moly - Protector sleeves - 6 point - 85mm long - 17, 19, 21mm A/F

B-7



B-8


AS-6105 (AL-D5MFL) (405-D5MQF)

1/2" Square Drive Impact Socket Set - 5 piece - Chrome moly - Protector sleeves - 6 point - 76 & 85mm long - 17, 19, 21, 22mm A/F - 19, 21mm flip socket

AS-6106 (AL-DS5KE)

1/2" Square Drive Torque Bar Socket Set - 8 piece - Chrome moly - Protector sleeves - 6 point - 85,180mm long - 17, 19, 21, 22mm A/F - 80, 90, 100, 110 ft-lb

AS-7100 1/2" Square Drive Thin Wall Impact Flip Socket - Chrome moly - 6 point - 76mm long - 19/21mm A/F

AS-7200 1/2" Square Drive Impact Flip Socket - Chrome moly - 6 point - 63mm long - 19/21mm A/F

AS-7300 3/4" Square Drive Budd Wheel Impact Socket - Chrome moly - 6 point - 95mm long - 41mm A/F hex - 21mm square

AS-7400 3/4" Square Drive Deep Impact Socket - Chrome moly - 90mm long - 17mm square




ATL-0250 (ATL-250)

250ml Air Tool Lubricant - Reduces wear - maintains performance - Increases tool life

ATL-1000 1 litre Air Tool Lubricant - Reduces wear - maintains performance - Increases tool life

ATL-5000 5 litre Air Tool Lubricant - Reduces wear - maintains performance - Increases tool life

C-4780-1A Straight Offset Sealant Blade - 57mm long - Used on tools such as Alliance AL-4780 and Shinano SI-3200AK




B-9


C-4780-1B Straight Offset Sealant Blade - 90mm long - Used on tools such as Alliance AL-4780 and Shinano SI-3200AK

C-4780-2C 90˚ Sealant Blade - 63mm long - Used on tools such as Alliance AL-4780 and Shinano SI-3200AK

C-4780-2D 90˚ Sealant Blade - 90mm long - Used on tools such as Alliance AL-4780 and Shinano SI-3200AK

C-4780-5A Straight Sealant Blade - 35mm long - Used on tools such as Alliance AL-4780 and Shinano SI-3200AK

C6000-2FTC

2mm

2mm CS Flat Tip Scaler Needle - Carbon steel - Flat tip - 180mm long - 2mm dia.

C6000-3CTC

3mm

3mm CS Chisel Tip Scaler Needle - Carbon steel - Chisel tip - 180mm long - 3mm dia.


C6000-3FTB

3mm

3mm BC Flat Tip Scaler Needle - Beryllium Copper - Flat tip - 180mm long - 3mm dia.

C6000-3FTC

3mm


C6000-4FTC

4mm


Alliance Abrasives & Cutting Tools


C-1

PRODUCT NO. IMAGE STYLE TYPE DETAILS PACK BARCODE

AA-10330040 Abrasive Belt 10mm x 330mm x 40grit 10




AA-1507040 Abrasive Disc150mm x 40grit

Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1


Hook & Loop1






AA-2107A040 Abrasive Disc50mm x 40grit Hook & Loop

1


1


1

AA-2107A120 Abrasive Disc50mm x 120grit

Hook & Loop1


Hook & Loop1




C-2



Hook & Loop1


Hook & Loop1


Hook & Loop1

AA-30540040 Abrasive Belt 30mm x 540mm x40grit 10




AA-3102040 Abrasive Disc75mm x 40grit Hook & Loop

1


1


1


Hook & Loop1


Hook & Loop1

AA-760908 Abrasive Disc75mm Cut Off Wheel

1.2mm Thick9.35mm Centre Hole

1

AA-HLS75110040 Abrasive Sheet75mm x 110mm x 40grit

Hook & Loop Sheets1


Hook & Loop Sheets1


Hook & Loop Sheets1


Hook & Loop Sheets1


Hook & Loop Sheets1


Hook & Loop Sheets1


Hook & Loop Sheets1






AA-QMD50040 Abrasive Disc 50mm x 40grit 10








AA-SCD50BLF Abrasive Disc50mm Blue Fine

Surface Conditioning10

AA-SCD50BRC Abrasive Disc50mm Brown Course Surface Conditioning

10

AA-SCD50MAM Abrasive Disc50mm Maroon Medium Surface Conditioning

10

AA-SCD75BLF Abrasive Disc75mm Blue Fine

Surface Conditioning10

AA-SCD75BRC Abrasive Disc75mm Brown Course Surface Conditioning

10

AA-SCD75MAM Abrasive Disc75mm Maroon Medium Surface Conditioning

10

AL-205DK Abrasive Disc 50mm Surface Conditioning Kit 10

AL-305DK Abrasive Disc 75mm Surface Conditioning Kit 10

ATC-18P Saw Blade Straight 18tpi 10



C-3


Alliance Air Preparation Equipment



D-1


AL-1000 1/4" Filter/Regulator - 1/4"FBSP ports - 9.6bar 140psi max. press. - 50 micron filter - 1000L/min 35.5cfm capacity

- Semi auto. drain

AL-1010 1/4" Filter/Regulator/Lubricator - 1/4"FBSP ports - 9.6bar 140psi max. press. - 50 micron filter - 1000L/min 35.5cfm capacity

- 40ml oil bowl - Semi auto. drain

AL-2000 1/2" Filter/Regulator - 1/2"FBSP ports - 9.6bar 140psi max. press. - 50 micron filter - 2000L/min 70.6cfm capacity

- Semi auto. drain

AL-2010 1/2" Filter/Regulator/Lubricator - 1/2"FBSP ports - 9.6bar 140psi max. press. - 50 micron filter - 2000L/min 70.6cfm capacity

- 120ml oil bowl - Semi auto. drain

AL-40212RM Pressure Gauge - Rear mount - 40mm dial - 1/8"BSP - 12bar 170psi - Black steel case

AL-50416BM Pressure Gauge - Bottom mount - 50mm dial - 1/4"BSP - 16bar 230psi - Black steel case


AL-50416RM Pressure Gauge - Rear mount - 50mm dial - 1/4"BSP - 16bar 230psi - Black steel case

ARV-150 Pressure Regulator - 1/4"BSP ports - 0.5-9.9bar W.P. - 7-144psi W.P. - Includes mounting bracket

M-30 Sub-Micronic Canister Filter - 1/4"F top ports - 1274L/min 45cfm capacity

- 8.6bar 125psi max.press. - 0.01 micron filter - Cellulose fibre element - Includes wall bracket

M-60 Sub-Micronic Canister Filter - 1/2"F side ports - 2831L/min 100cfm capacity

- 8.6bar 125psi max.press. - 0.01 micron filter - Cellulose fibre element

M-723 Sub-Micronic Filter Element - Replacement element for m-30 & m-60 canister filters.

- Absorbent high wet-strength cellulose fibre sheeting wound into a roll.

Alliance Air Hose & Fittings

E-1

PRODUCT NO. IMAGE STYLE TYPE DETAILS BARCODE

ABV-108 Ball Valve Zinc Alloy 1/4"FBSP x 1/4"FBSP




ABV-125 Ball Valve Zinc Alloy 1"FBSP x 1"FBSP

AH10010 Air Hose Braided PVC 1.6mPa 230psi

10mmID x 10m plain ends










12.5mmID x 20m plain ends





AH10010ACAir Hose w/-

Quick CouplersBraided PVC 1.6mPa 230psi

10mmID x 10m C-Series Adaptor & Socket












12.5mmID x 20m C-Series Adaptor & Socket

AH12100AC Air Hose w/- Quick Couplers

Braided PVC 1.6mPa 230psi

12.5mmID x 100m C-Series Adaptor & Socket



E-2


AH10010ANAir Hose w/-


10mmID x 10m N-Series Adaptor & Socket












12.5mmID x 20m N-Series Adaptor & Socket

AH12100AN Air Hose w/- Quick Couplers


12.5mmID x 100m N-Series Adaptor & Socket

AH10010ARAir Hose w/-


10mmID x 10m R-Series Adaptor & Socket












12.5mmID x 20m R-Series Adaptor & Socket

AH12100AR Air Hose w/- Quick Couplers


12.5mmID x 100m R-Series Adaptor & Socket

AH1006 (CH1006) Coil Hose

Braided Polyurethane

6.5mmID x 4.5m W/L 1/4"MBSP ends



6.5mmID x 7.5m W/L 1/4"MBSP ends



10mmID x 4.5m W/L 1/4"MBSP ends



10mmID x 7.5m W/L 1/4"MBSP ends

RC2000/10Air/Water

Hose ReelSpring

Retractable10mmID x 15m

1/4"MBSP end fitting

RC2020/10Air/Water Hose Reel

Spring Retractable

10mmID x 20m1/4"MBSP end fitting

RC2015/12 Air/Water Hose Reel

Spring Retractable

12.5mmID x 15m1/4"MBSP end fitting




E-4


AC1PF4

AC1PF6

AC1PF8

AC1PSH

Cejn Metal Plug1/4"BSP Female Thread

2 per pack


2 per pack


2 per pack

Cejn Metal PlugSchrader Valve Thread

2 per pack

AC1PH6

AC1PH8

Cejn Metal Plug3/8” (10mm) Hose Tail

2 per pack

Cejn Metal Plug1/2” (12.5mm)

Hose Tail2 per pack

AC1PM4

AC1PM6

AC1PM8

Cejn Metal Plug1/4"BSP male Thread

2 per pack


2 per pack


2 per pack

AC1SF4

AC1SF6

AC1SF8

Cejn Metal Socket1/4"BSP Female Thread

1 per pack


1 per pack


1 per pack

AC1SH6

AC1SH8

Cejn Metal Socket3/8” (10mm) Hose Tail

1 per pack

Cejn Metal Socket1/2” (12.5mm)

Hose Tail1 per pack

INDUSTRIAL QUALITY COJPRESSED AIR QUICK COUPLERS

16 Piece Sets of Best Seller Sockets & Adaptors in Blister Packs

These sets fit across one face of the Alliance triangular display stands in two rows as shown. They also fit across the Alliance wall display stand in one row or down the side in two rows. One set also fits on a single Alliance display stand panel as shown. Three Series to choose from -

• N-Series Quick Coupler Sockets and Adaptors

• R-Series Quick Coupler Sockets and Adaptors

• C-Series Quick Coupler Sockets and Adaptors

E-3





AC1SM4

AC1SM6

AC1SM8

Cejn Metal Socket1/4"BSP Male Thread

1 per pack


1 per pack


1 per pack

AH2PF4 Hy-Flo Metal Plug1/4"BSP Female Thread

1 per pack

AH2PH5 Hy-Flo Metal Plug5/16" (8mm) Hose Tail

1 per pack

AH2PH6 Hy-Flo Metal Plug3/8" (10mm) Hose Tail

1 per pack

AH2PH8 Hy-Flo Metal Plug1/2" (12.5mm)

Hose Tail1 per pack

AH2PM4

AH2PM6

Hy-Flo Metal Plug1/4"BSP Male Thread

1 per pack

Hy-Flo Metal Plug3/8"BSP Male Thread

1 per pack

AH2SF4 Hy-Flo Metal Socket1/4"BSP Female Thread

1 per pack

AH2SF8 Hy-Flo Metal Socket1/2"BSP Female Thread

1 per pack

AH2SH5

AH2SH6

AH2SH8

Hy-Flo Metal Socket5/16" (8mm) Hose Tail1 per pack

Hy-Flo Metal Socket3/8" (10mm) Hose Tail

1 per pack

Hy-Flo Metal Socket1/2" (12.5mm)

Hose Tail1 per pack

AH2SM4

AH2SM6

Hy-Flo Metal Socket1/4"BSP Male Thread

1 per pack

Hy-Flo Metal Socket3/8"BSP Male Thread

1 per pack

AH2SM8 Hy-Flo Metal Socket1/2"BSP Male Thread

1 per pack

AN1PF4

AN1PF6

AN1PF8

AN1PSH

Nitto Metal Plug1/4"BSP Female Thread

2 per pack


2 per pack


2 per pack

Nitto Metal PlugSchrader Valve Thread

2 per pack

E-4



E-5


AN1PH6

AN1PH8

Nitto Metal Plug3/8" (10mm) Hose Tail

2 per pack

Nitto Metal Plug1/2" (12.5mm)

Hose Tail2 per pack

AN1PM4

AN1PM6

AN1PM8

Nitto Metal Plug1/4"BSP Male Thread

2 per pack


2 per pack


2 per pack

AN1SF4

AN1SF6

AN1SF8

Nitto Metal Socket1/4"BSP Female Thread

1 per pack


1 per pack


1 per pack

AN1SH6 Nitto Metal Socket3/8" (10mm) Hose Tail

1 per pack

AN1SH8 Nitto Metal Socket1/2" (12.5mm)

Hose Tail1 per pack

AN1SM4

AN1SM6

AN1SM8

Nitto Metal Socket1/4"BSP Male Thread

1 per pack


1 per pack


1 per pack

AP1PF4 Nitto Plastic Plug1/4"BSP Female Thread

1 per pack


1 per pack


1 per pack

AP1PH6 Nitto Plastic Plug3/8" (10mm) Hose Tail

1 per pack

AP1PH8 Nitto Plastic Plug1/2" (12.5mm)

Hose Tail1 per pack

AP1PM4 Nitto Plastic Plug1/4"BSP Male Thread

1 per pack


1 per pack


1 per pack




E-6


AP1SF4 Nitto Plastic Socket1/4"BSP Female Thread

1 per pack


1 per pack


1 per pack

AP1SH6 Nitto Plastic Socket3/8" (10mm) Hose Tail

1 per pack

AP1SH8 Nitto Plastic Socket1/2" (12.5mm)

Hose Tail1 per pack

AP1SM4 Nitto Plastic Socket1/4"BSP Male Thread

1 per pack


1 per pack


1 per pack

AR1PF4

AR1PF6

AR1PF8

AR1PSH

Ryco Metal Plug1/4"BSP Female Thread

2 per pack


2 per pack


2 per pack

Ryco Metal PlugSchrader Valve Thread

2 per pack

AR1PH6

AR1PH8

Ryco Metal Plug3/8" (10mm) Hose Tail

2 per pack

Ryco Metal Plug1/2" (12.5mm)

Hose Tail2 per pack

AR1PM4

AR1PM6

AR1PM8

Ryco Metal Plug1/4"BSP Male Thread

2 per pack


2 per pack


2 per pack

AR1SF4

AR1SF6

AR1SF8

Ryco Metal Socket1/4"BSP Female Thread

1 per pack


1 per pack


1 per pack

AR1SH6

AR1SH8

Ryco Metal Socket3/8" (10mm) Hose Tail

1 per pack

Ryco Metal Socket1/2" (12.5mm)

Hose Tail1 per pack



E-7


AR1SM4

AR1SM6

AR1SM8

Ryco Metal Socket1/4"BSP Male Thread

1 per pack


1 per pack


1 per pack

MTA3 Manifold 3 Port Round 1 x 1/4"BSP Inlet

3 x 1/4"BSP Outlets

MTA5 Manifold 8 Port Straight3 x 1/4"BSP Inlets

5 x 1/4"BSP Outlets

MUA5 ManifoldHigh Volume

5 Port Straight2 x 1/2"BSP Inlets

5 x 1/4"BSP Outlets

NO241418Brass Fitting

No. 24 Reducing Bush

1/4"MBSP x 1/8"FBSP 2 per pack






3/8"MBSP x 1/4"FBSP2 per pack





















1"MBSP x 1/2"FBSP 1 per pack

NO24134 Brass Fitting


1"MBSP x 3/4"FBSP 1 per pack




E-8


NO2518Brass Fitting

No. 25 M & F Elbow


NO2514Brass Fitting

No. 25 M & F Elbow


NO2538Brass Fitting

No. 25 M & F Elbow


NO2512Brass Fitting

No. 25 M & F Elbow


NO2534Brass Fitting

No. 25 M & F Elbow


NO251 Brass Fitting

No. 25 M & F Elbow

1"MBSP x 1"FBSP 1 per pack

NO2618Brass Fitting

No. 26 Hexagon Socket

1/8"FBSP 2 per pack



1/4"FBSP 2 per pack

NO2638Brass Fitting


3/8"FBSP 2 per pack

NO2612Brass Fitting


1/2"FBSP 2 per pack

NO2634Brass Fitting


3/4"FBSP 1 per pack

NO261 Brass Fitting


1"FBSP

NO2718

NO2714

NO2738

NO2712

NO2734

NO271

Brass Fitting

No. 27 Hexagon Nipple

1/8"MBSP x 1/8"MBSP2 per pack

Brass Fitting



Brass Fitting



Brass Fitting



Brass Fitting



Brass Fitting


1"MBSP x 1"MBSP1 per pack


No. 29 Reducing Socket

1/4"FBSP x 1/8"FBSP 2 per pack











E-9


NO3518Brass Fitting

No.35 Female Tee

1/8"FBSP 2 per pack

NO3514Brass Fitting

No.35 Female Tee

1/4"FBSP 2 per pack

NO3538Brass Fitting

No.35 Female Tee

3/8"FBSP 1 per pack

NO3512Brass Fitting

No.35 Female Tee

1/2"FBSP 1 per pack

NO3534Brass Fitting

No.35 Female Tee

3/4"FBSP 1 per pack

NO351 Brass Fitting

No.35 Female Tee

1"FBSP 1 per pack

NO6418Brass Fitting

No. 64 Tapered Plug

1/8"MBSP 2 per pack

NO6414Brass Fitting

No. 64 Tapered Plug

1/4"MBSP 2 per pack

NO6438Brass Fitting

No. 64 Tapered Plug

3/8"MBSP 2 per pack

NO6412Brass Fitting

No. 64 Tapered Plug

1/2"MBSP 2 per pack

NO6434Brass Fitting

No. 64 Tapered Plug

3/4"MBSP 1 per pack

NO641 Brass Fitting

No. 64 Tapered Plug

1"FBSP 1 per pack


No. 72 Adaptor

1/4"FBSP x 1/8"MBSP2 per pack


No. 72 Adaptor

3/8"FBSP x 1/8"MBSP 2 per pack


No. 72 Adaptor



No. 72 Adaptor



No. 72 Adaptor



No. 72 Adaptor



No. 72 Adaptor



No. 72 Adaptor



No. 72 Adaptor




E-10



No. 73 Reducing Nipple






















1"MBSP x 1/2"MBSP1 per pack



1"MBSP x 3/4"MBSP1 per pack

OC5838 Hose Clamp Ear Clip Suits 3/8"(10mm)ID hose

OC3412 Hose Clamp Ear Clip Suits 1/2"(12.5mm)ID hose

OPLIER Crimp Tool Ear Clip For crimping ear clips




E-11


P31414Brass Fitting

P3 Hose Tail1/4" (6.35mm) ID Hose x 1/4"MBSP

2 per pack

P31438Brass Fitting

P3 Hose Tail1/4"(6.35mm) ID Hose x 3/8"MBSP

2 per pack

P31412Brass Fitting


2 per pack

P351614Brass Fitting

P3 Hose Tail5/16"(8mm) ID Hose x 1/4"MBSP

2 per pack



2 per pack



2 per pack

P33818Brass Fitting


2 per pack

P33814Brass Fitting


2 per pack

P33838Brass Fitting


2 per pack

P33812Brass Fitting


2 per pack

P31214Brass Fitting


2 per pack

P31238Brass Fitting


2 per pack

P31212Brass Fitting


2 per pack

P31234Brass Fitting


1 per pack

P33412Brass Fitting


1 per pack

P33434Brass Fitting


1 per pack

P3341Brass Fitting

P3 Hose Tail3/4"(20mm) ID Hose x 1"MBSP

1 per pack

P3134Brass Fitting

P3 Hose Tail1"(25mm) ID Hose x 3/4"MBSP

1 per pack

P311 Brass Fitting

P3 Hose Tail1"(25mm) ID Hose x 1"MBSP

1 per pack

P714Brass Fitting

P7 Hose Joiner1/4"(6.35mm) ID Hose

2 per pack

P7516Brass Fitting

P7 Hose Joiner5/16"(8mm) ID Hose

2 per pack

P738Brass Fitting


2 per pack

P712Brass Fitting

P7 Hose Joiner1/2"(12.5mm) ID Hose

2 per pack

P734Brass Fitting


1 per pack

P71 Brass Fitting

P7 Hose Joiner1"(25mm) ID Hose

1 per pack

E-12






P10 Hose Tail1/4"(6.35mm) ID Hose x 1/4"FBSP

2 per pack



2 per pack


P10 Hose Tail5/16"(8mm) ID Hose x 1/4"FBSP

2 per pack



2 per pack



2 per pack



2 per pack



2 per pack



2 per pack



2 per pack

P101212 Brass Fitting


2 per pack

TT1210 Thread Seal Teflon Tape 12mm x 10m

US06 Uni Swivel Aluminium 1/4"MBSP x 1/4"FBSP

US06SS Uni Swivel Stainless 1/4"MBSP x 1/4"FBSP




US25 Uni Swivel Aluminium 1"MBSP x 1"FBSP

WD0812 Hose Clamp Worm DriveSuits 5/16"(8mm) ID hose

8 - 12mm6 per pack

WD1016 Hose Clamp Worm DriveSuits 3/8"(10mm) ID hose

10 - 16mm6 per pack

WD1220 Hose Clamp Worm DriveSuits 1/2"(12.5mm) ID hose

12 - 20mm6 per pack

FULL SPARE PARTS & SERVICE BACK-UP

Alliance Display Stands

COUNTER

FLAT TRIANGULAR

ENQUIRE ABOUT OUR

SPECIAL PACKAGE

DEALS

ENQUIRE ABOUT OUR

SPECIAL PACKAGE

DEALS


F-1

Alliance Construction Air Tools & Accessories




AG-747 Cleaning Gun - 1800mm o/a length - 2.75kg - 3/4"BSP air inlet with claw coupling

- Adjustable side handle

AL-20020CF Air Hose - Claw coupling ends - H/D Braided Rubber - 20mmID x 20m

AL-25020CF Air Hose - Claw coupling ends - H/D Braided Rubber - 25mmID x 20m

AL-634 6-PORT AIR MANIFOLD - 1 x 2”BSP inlet - 6 x 3/4”BSP outlets - Pressure gauge - Safety valve - 6 x Ball valves - 7 x Claw couplings - 15kg - 1172kPa 170psi - 304 Stainless Steel - AS-1210 Class 3 Hazard Level E

PT-1030 30mm Concrete Vibrator - 30mm head diameter - 4kg headweight - 20,000vpm - 5m³/hr placement - 400L/min 14cfm air cons

- 2m hose length - 980N force

PT-1050 50mm Concrete Vibrator - 50mm head diameter - 6kg head weight - 17,500vpm - 23m³/hr placement - 600L/min 21cfm air cons

- 2m hose length - 3432N force

G-1



AL-8140 20kg Pavement Breaker - Optional muffler - 609mm long - 25 x 108mm 1" x 4-1/4" chuck

- 48mm bore - 146mm stoke - 1450 blows/min - 1360L/min 48cfm cons. - 3/4" air inlet - For steels see page G-4

AL-8160 30kg Pavement Breaker - Optional muffler - 609mm long - 28 x 160mm 1-1/8" x 6-1/4" chuck

- 60.3mm bore - 104mm stroke - 1350 blows/min - 1812L/min 64cfm cons. - 3/4" air inlet - For steels see page G-4,5

AL-8175 37kg Pavement Breaker - 37kg net weight - 710mm long - 28 x 160mm 1-1/8" x 6-1/4" chuck

- 57.2mm bore - 1200 blows/min - 2095L/min 74cfm cons. - For steels see page G-4,5

AL-8323 12kg Pick Hammer - 12kg net weight - 22 x 83mm 7/8" x 3 -1/4" chuck

- 40mm bore - 86mm stroke - 1200 blows/min - 1133L/min 40cfm cons. - 533mm long - For steels see page G-4

AL-8408 14kg Rivet Buster - 11X jumbo steels - 14kg net weight - 30.2mm bore - 203mm 8" stroke - 1200 blows/min - 1000L/min 35cfm cons. - 584mm long - 1/2" air inlet - For steels see page G-5

AL-8411 15kg Rivet Buster - 11X jumbo steels - 15kg net weight - 30.2mm bore - 279mm 11" stroke - 800 blows/min - 1080L/min 38cfm cons. - 660mm long - 1/2" air inlet - For steels see page G-5






AL-8600 18kg Backfill Tamper - 150mm hollow C.I butt - 18kg with butt - 38mm bore - 140mm stroke - 800 blows/min - 1100L/min 39cfm cons. - 1310mm long - 1/2" air inlet

AL-8709 4kg Rotary Hammer Drill - Max hole size 25dia x 300mm

- 19 x 95mm chuck - 4kg net weight - 3400 blows/min - 595L/min 21cfm - 381mm long - 3/8" air inlet - For steels see page G-3,4

AL-8720 7.5kg Rock Drill - Max hole size 32dia x 400mm

- 22 x 108mm 7/8" x 4"-1/4" chuck

- 2900 blows/min - 1200L/min 36cfm cons. - 483mm long - 3/8" air inlet - For steels see page G-4

AL-8730 13kg Rock Drill - Max hole size 45dia x 2.4m

- 22 x 108mm 7/8" x 4"-1/4" chuck

- 2700 blows/min - 240rpm - 2100L/min 73cfm cons. - 483mm long - For steels see page G-4

AL-8760 28kg Rock Drill* Max hole size

50dia x 3.0m - Optional muffler - 22 x 108mm 7/8" x 4"-1/4" chuck

- 2250 blows/min - 200rpm - 2770L/min 98cfm cons. - 603mm long - For steels see page G-4

AL-8822 Open Handle

Chipping Hammer 50mm Stroke - 0.580" hex. chuck - 7kg net weight - 2200 blows/min - 720L/min 25cfm - 337mm long - 3/8" air inlet - For steels see pages


AL-8824 Open Handle Chipping Hammer 100mm Stroke - 0.580" hex. chuck - 8.0kg net weight - 1400 blows/min - 940L/min 33.2cfm - 460mm long - 3/8" air inlet - For steels see pages

AN09012 moil Point - 19 x 95mm shank - 255mm long - Suits AL-8709

AN09013 Chisel Blank - 19 x 95mm shank - 255mm long - Suits AL-8709

AN09015 25mm Chisel - 19 x 95mm shank - 25mm wide - 300mm long - Suits AL-8709

AN09021 75mm Chisel - 19 x 95mm shank - 300mm long - Suits AL-8709

AN09022 Drill Holder K-Taper - 19 x 95mm shank - 160mm long - Suits AL-8709

OTHER TYPES & SIZES AVAILABLE ON REQUEST

G-2




G-3


AR25300 Single Carbide Drill Rod - 19 x 95mm shank - 25mm tip dia - 430mm o/a length - 300mm max hole depth - Suits AL-8709

AN15018 Moil Point - 22 x 83mm 7/8" x 3-1/4" shank

- 450mm long - Suits AL-8313, AL-8323, AL-8720 AL-8130, AL-8313 AL-8730, AL-8760

AN15118 25mm Chisel - 22 x 83mm 7/8" x 3-1/4" shank

- 25mm wide - 450mm long - Suits AL-8313, AL-8323, AL-8720 AL-8130, AL-8313 AL-8730, AL-8760

AN15218 75mm Chisel - 22 x 83mm 7/8" x 3-1/4" shank


AN15411 Asphalt Cutter - 22 x 83mm 7/8" x 3-1/4" shank


AN17018 Moil Point - 25 x 108mm 1" x 4-1/4" shank

- 450mm long - Suits AL-8130, AL-8140


AN09023 (AS17586)

Adaptor - SDS Plus Drill Bits - 19 x 95mm shank 220mm long

- Suits AL-8709

AN09605 Bent Spade Chisel - 19 x 95mm shank - 60mm wide - 300mm long - Suits AL-8709









AN17118 25mm Chisel - 25 x 108mm 1" x 4-1/4" shank

- 25mm wide - 450mm long - Suits AL-8130, AL-8140

AN17214 75mm Chisel - 25 x 108mm 1" x 4-1/4" shank


AN17511 Asphalt Cutter - 25 x 108mm - 1" x 4-1/4" shank - 115mm wide - 280mm long - Suits AL-8130, AL-8140

AN60018 Moil Point - 28 x 160mm 1-1/8" x 6-1/4" shank

- 450mm long - Suits AL-8160, AL-8190

AN60118 25mm Chisel - 28 x 160mm 1-1/8" x 6-1/4" shank


AN60214 75mm Chisel - 28 x 160mm 1-1/8" x shank 6-1/4"



AN60605 Asphalt Cutter - 28 x 160mm 1-1/8" x 6-1/4" shank


AN18018 Moil Point - 32 x 160mm 1-1/4" x 6-1/4" shank

- 450mm long


- 25mm wide - 450mm long



AN18511 Asphalt Cutler - 32 x 160mm 1-1/4" x 6-1/4" shank


AN33010 Moil Point - 11X mumbo shank - 254mm long - Suits AL-8408, AL-8411

G-4





G-5


AN33110 25mm Flat Chisel - 11X mumbo shank - 254mm long - Suits AL-8408, AL-8411

AN33319 Backout Punch - 11X mumbo shank - For 3/4" rivets - 245mm long - Suits AL-8408, AL-8411

AN52008 Round Blank - 14.7mm - 0.580" hex. - Oval collar - 228mm long - Suits AL-8822, AL-8823, AL-8824

AN52011 Round blank - 14.7mm - 0.580" hex. - Oval Collar - 304mm long - Suits AL-8822, AL-8823, AL-8824

AN52109 Moil Point - 14.7mm - 0.580" hex. - Oval Collar - 228mm long - Suits AL-8822, Al-8823, AL-8824

AN52112 Moil Point - 14.7mm - 0.580" hex. - Oval Collar - 304mm long - Suits AL-8822, Al-8823, AL-8824


AN52209 25mm Chisel - 14.7mm - 0.580" hex. - Oval Collar - 25mm wide - 228mm long - Suits AL-8822, AL-8823, AL-8824





CFT12 Claw Coupling - Female thread - 1/2"BSP





CFT20 Claw Coupling - Female thread - 3/4"BSP

CFT25 Claw Coupling - Female thread - 1"BSP

CHT12 Claw Coupling - Hose Tail - 1/2"ID Hose

CHT20 Claw Coupling - Hose Tail - 3/4"ID Hose

CHT25 Claw Coupling - Hose Tail - 1"ID Hose

CMT12 Claw Coupling - Male thread - 1/2"BSP


CMT20 Claw Coupling - Male thread - 3/4"BSP

CMT25 Claw Coupling - Male thread - 1"BSP

CC3W1 Claw Coupling - Connector - 3 Way

CFS01 Claw Coupling Seal - Rubber - Suits Alliance Claw Couplings

CSLP1 Claw Coupling - Safety Locking Pin - Spring Wire

CCC12 Hose Clamp - Bolt Tighten - 1/2"ID Hose

G-6






CCC20 Hose Clamp - Bolt Tighten - 3/4"ID Hose

CCC25 Hose Clamp - Bolt Tighten - 1"ID Hose

CFWC1 Whip Check Cable - 3.2mm x 508mm cable - 1/2" to 1-1/4"ID hose range

TP-2L 1/2" In-Line Lubricator - Aluminium Body - 42ml oil capacity - 1/2"FBSP - 34.4bar 500psi - 849L/min 30cfm - 60mm width

TP-3L 3/4" In-Line Lubricator - Aluminium Body - 111ml oil capacity - 3/4"FBSP - 17.9bar 260psi - 1982L/min 70cfm - 80mm width

AL-8000 1" Turtle In-line Lubricator - 1.3L capacity - 3kg - 20bar - Claw couplings

G-7


Alliance Air Compressors & Accessories



ACD-1041 Direct Drive 12 Volt DC Electric Compressor - 112L/min 4.0cfm P.D. - 38L/min 1.4cfm F.A.D.* - 8bar 116psi max. press. - 40amp max. current - 2700rpm - 7.5kg

ACD-1043 Direct Drive 24 Volt DC Electric Compressor - 156L/min 5.5cfm P.D. - 59L/min 2.1cfm F.A.D.* - 8bar 116psi max. press. - 30amp max. current - 3000rpm - 7.5kg

ACD25063 Air Inlet Filter Suits ACD-25

DC25 Drain Valve - 1/4"BSP

MDR-2T Pressure Switch - Single phase - 2.2kW switching - 12bar 174psi - Suits ACB-20 Air Compressor

MDR 3/11 Pressure Switch - Three phase - 11kW switching - 35bar 500psi


ST25-0900 ASME Safety Valve - 1/4" BSP - 860kPa 125psi - 17.5 Hex x 51H mm

ST25-2200C ASME Safety Valve - 1/4" BSP - 1090kPa 160psi - 17.5 Hex x 51H mm

SF50-2900 ASME Safety Valve - 1/2" BSP - 965kPa 140psi - 22.2 Hex x 86H mm



LGM30 - 2330 Load Genie Mark 3 - 1/2" NPTF Inlet - 1/2" NPTm Outlet - 3/8" NPTF Vent - 30cfm max - 109psi Cut-in - 138psi Cut-out

H-1

Alliance Air Compressors & Accessories



H-2


CA12-0200 Unloader Check Valve - 1/2" OD Tube Inlet - 3/8" MBSP Outlet - 3cfm min - 12cfm max - 20.6 Hex 43H mm

PA12-0300 Unloader Check Valve - 3/8" FBSP Inlet - 3/8" MBSP Outlet - 3cfm min - 12cfm max - 20.6 Hex 46H mm

Chieftain Carbide Burrs

TM


PRODUCT NO. IMAGE OVERALL LENGTH SHANK DIA. HEAD DIA. FLUTE LENGTH BARCODE

SA-1 50mm ¼" (6.35mm) 6mm 16mm

SA-11 50mm ¼" (6.35mm) 3.0mm 12mm

SA-14 50mm ¼" (6.35mm) 4.7mm 16mm

SA-1XL 163mm ¼" (6.35mm) 6mm 12.7mm

SA-2 63mm ¼" (6.35mm) 8mm 19mm

SA-3 63mm ¼" (6.35mm) 9.5mm 19mm

SA-3XL 171mm ¼" (6.35mm) 9.5mm 19mm

SA-4 68mm ¼" (6.35mm) 11mm 25mm

SA-5 68mm ¼" (6.35mm) 12.7mm 25mm

SA-5XL 177mm ¼" (6.35mm) 12.7mm 25mm

SA-6 68mm ¼" (6.35mm) 16mm 25mm

SB-1 50mm ¼" (6.35mm) 6mm 16mm

SB-11 50mm ¼" (6.35mm) 3mm 12mm

SB-14 50mm ¼" (6.35mm) 4.7mm 16mm

SB-1XL 163mm ¼" (6.35mm) 6mm 12.7mm

SB-2 63mm ¼" (6.35mm) 8mm 20mm

SB-3 63mm ¼” (6.35mm) 9.5mm 19mm

SB-3XL 171mm ¼” (6.35mm) 9.5mm 19mm

SB-4 68mm ¼" (6.35mm) 11mm 25mm

SB-5 68mm ¼" (6.35mm) 12.7mm 25mm

SB-5XL 177mm ¼" (6.35mm) 12.7mm 25mm

SB-6 68mm ¼" (6.35mm) 16mm 25mm

I-1


TMCopyright © 2019. Specifications and prices subject to change without notice. E&OE


I-2


SC-1 50mm ¼" (6.35mm) 6mm 16mm

SC-11 50mm ¼" (6.35mm) 3mm 12mm

SC-14 50mm ¼" (6.35mm) 4.7mm 16mm

SC-1XL 163mm ¼" (6.35mm) 6mm 12.7mm

SC-2 63mm ¼" (6.35mm) 8mm 19mm

SC-3 63mm ¼" (6.35mm) 9.5mm 19mm

SC-3XL 171mm ¼" (6.35mm) 9.5mm 19mm

SC-4 68mm ¼" (6.35mm) 11mm 25mm

SC-5 68mm ¼" (6.35mm) 12.7mm 25mm

SC-5XL 177mm ¼” (6.35mm) 12.7mm 25mm

SC-6 68mm ¼" (6.35mm) 16mm 25mm

SD-1 50mm ¼" (6.35mm) 6mm 5mm

SD-11 50mm ¼" (6.35mm) 3mm 2mm

SD-14 50mm ¼" (6.35mm) 4.7mm 4.5mm

SD-1XL 157mm ¼" (6.35mm) 6.3mm 5mm

SD-2 50mm ¼" (6.35mm) 8mm 7mm

SD-3 52mm ¼" (6.35mm) 9.5mm 8mm

SD-3XL 161mm ¼" (6.35mm) 9.5mm 8mm

SD-4 52mm ¼" (6.35mm) 11mm 9.5mm

SD-5 54mm ¼" (6.35mm) 12.7mm 11mm

SD-5XL 164mm ¼" (6.35mm) 12.7mm 11mm

SD-6 58mm ¼" (6.35mm) 16mm 14mm


TM



SE-1 50mm ¼" (6.35mm) 6mm 10mm

SE-1XL 163mm ¼" (6.35mm) 6.3mm 10mm

SE-3 60mm ¼" (6.35mm) 9.5mm 16mm

SE-3XL 168mm ¼" (6.35mm) 9.5mm 16mm

SE-5 66mm ¼" (6.35mm) 12.7mm 22mm

SE-5XL 177mm ¼" (6.35mm) 12.7mm 22mm

SE-6 68mm ¼" (6.35mm) 16mm 25mm

SE-7 68mm ¼" (6.35mm) 19mm 25mm

SF-1 50mm ¼" (6.35mm) 6mm 19mm

SF-1XL 163mm ¼" (6.35mm) 6mm 13mm

SF-3 63mm ¼" (6.35mm) 9.5mm 19mm

SF-3XL 171mm ¼" (6.35mm) 9.5mm 19mm

SF-5 68mm ¼" (6.35mm) 12.7mm 25mm

SF-5XL 177mm ¼" (6.35mm) 12.7mm 25mm

SF-6 68mm ¼" (6.35mm) 16mm 25mm

SG-1 50mm ¼" (6.35mm) 6mm 19mm

SG-1XL 163mm ¼" (6.35mm) 6mm 13mm

SG-3 63mm ¼" (6.35mm) 9.5mm 19mm

SG-3XL 171mm ¼" (6.35mm) 9.5mm 19mm

SG-5 68mm ¼" (6.35mm) 12.7mm 25mm

SG-5XL 177mm ¼" (6.35mm) 12.7mm 25mm

SG-6 68mm ¼" (6.35mm) 16mm 25mm

I-3




I-4


SH-2 63mm ¼" (6.35mm) 8mm 19mm

SH-2XL 171mm ¼" (6.35mm) 8mm 19mm

SH-5 75mm ¼” (6.35mm) 12.7mm 31mm

SH-5XL 183mm ¼" (6.35mm) 12.7mm 31mm

SH-6 79mm ¼" (6.35mm) 16mm 36mm

SL-1 50mm ¼" (6.35mm) 6mm 16mm

SL-1XL 168mm ¼" (6.35mm) 6mm 16mm

SL-2 66mm ¼" (6.35mm) 8mm 22mm

SL-3 71mm ¼" (6.35mm) 9.5mm 27mm

SL-3XL 179mm ¼" (6.35mm) 9.5mm 27mm

SL-4 72mm ¼" (6.35mm) 12.7mm 28mm

SL-4XL 180mm ¼" (6.35mm) 12.7mm 28mm

SL-6 76mm ¼" (6.35mm) 16mm 30mm

SM-1 50mm ¼" (6.35mm) 6mm 12.7mm

SM-2 50mm ¼" (6.35mm) 6mm 18mm

SM-4 60mm ¼" (6.35mm) 9.5mm 16mm

SM-5 66mm ¼" (6.35mm) 12.7mm 22mm

SM-6 68mm ¼" (6.35mm) 16mm 25mm

SN-1 50mm ¼" (6.35mm) 6mm 8mm

SN-2 52mm ¼" (6.35mm) 9.5mm 9.5mm

SN-3 56mm ¼" (6.35mm) 12.7mm 12.7mm

SA-1AC 50mm ¼" (6.35mm) 6mm 19mm

SA-3AC 63mm ¼" (6.35mm) 9.5mm 19mm

SA-5AC 68mm ¼" (6.35mm) 12.7mm 25mm


TM


I-5


SA-42 38mm 1/8" (3.18mm) 2.5mm 11mm

SA-43 38mm 1/8" (3.18mm) 3mm 14mm

SA-51 50mm 1/8" (3.18mm) 6.3mm 12.7mm

SB-1AC

50mm ¼" (6.35mm) 6mm 19mm

SB-3AC 63mm ¼" (6.35mm) 9.5mm 19mm

SB-5AC 68mm ¼" (6.35mm) 12.7mm 25mm

SC-1AC 50mm ¼" (6.35mm) 6mm 19mm

SC-3AC 63mm ¼" (6.35mm) 9.5mm 19mm

SC-5AC 68mm ¼" (6.35mm) 12.7mm 25mm

SC-41 38mm 1/8" (3.18mm) 2.5mm 11mm

SC-42 38mm 1/8" (3.18mm) 3mm 14mm

SC-51 50mm 1/8" (3.18mm) 6.3mm 12.7mm

SD-1AC 50mm ¼" (6.35mm) 6mm 5mm

SD-3AC 52mm ¼" (6.35mm) 9.5mm 8mm

SD-5AC 54mm ¼" (6.35mm) 12.7mm 11mm

SD-42 38mm 1/8" (3.18mm) 3mm 2mm

SD-51 43mm 1/8" (3.18mm) 6.3mm 5mm

SE-1AC 50mm ¼" (6.35mm) 6mm 10mm

SE-3AC 60mm ¼" (6.35mm) 9.5mm 16mm

SE-5AC 66mm ¼" (6.35mm) 12.7mm 22mm

SE-41 38mm 1/8" (3.18mm) 3mm 5mm

SE-51 47mm 1/8" (3.18mm) 6.3mm 9.5mm

SF-1AC 50mm ¼" (6.35mm) 6mm 19mm

SF-3AC 63mm ¼" (6.35mm) 9.5mm 19mm

SF-5AC 68mm ¼" (6.35mm) 12.7mm 25mm




I-6


SF-41 38mm 1/8" (3.18mm) 3mm 6.3mm

SF-42 38mm 1/8" (3.18mm) 3mm 13mm

SF-51 50mm 1/8" (3.18mm) 6.3mm 13mm

SG-44 38mm 1/8" (3.18mm) 3mm 13mm

SG-51 50mm 1/8" (3.18mm) 6.3mm 13mm

SH-41 38mm 1/8" (3.18mm) 3mm 6mm

SL-1AC 50mm ¼" (6.35mm) 6mm 16mm

SL-3AC 71mm ¼" (6.35mm) 9.5mm 27mm

SL-4AC 72mm ¼" (6.35mm) 12.7mm 28mm

SL-41 38mm 1/8" (3.18mm) 3mm 9.5mm

SM-41 38mm 1/8" (3.18mm) 3mm 8.7mm

SM-43 38mm 1/8" (3.18mm) 3mm 16mm

SM-51 50mm 1/8" (3.18mm) 6.3mm 12.7mm

SN-41 38mm 1/8" (3.18mm) 3mm 3mm

SN-42 38mm 1/8" (3.18mm) 3mm 5mm

BURR DISPLAY STAND

The burr stand is an attractive perspex lockable display that holds up to 64 pieces.

Trelawny Surface Preparation Tools




133.3100 3BPG Needle Scaler Pistol Grip - 28 x 3mm needles - 2200 blows/min - 228Lmin 8cfm - 1/4"BSP air inlet - 3.8kg - 55mm wide

196.2003 VL203 Needle Scaler Pistol Grip Low Vibration - 19 x 3mm needles - 2400 blows/min - 114L/min 4cfm - 1/4"BSP air inlet - 3.2kg - 52mm wide

Aeq 2.75m/sec²

196.2103 VL223 Needle Scaler Straight Grip Low Vibration - 19 x 3mm needles - 2400 blows/min - 114L/min 4cfm - 1/4"BSP air inlet - 2.95kg - 52mm wide

Aeq 2.56m/sec²

196.3003 VL303 Needle Scaler Pistol Grip Low Vibration - 28 x 3mm - 3000 blows/min - 156L/min 5.5cfm - 1/4"BSP air inlet - 3.51kg - 57mm wide

Aeq 2.3m/sec²

196.2203 VL203 Chisel Scaler Pistol Grip Low Vibration - 12mm square chuck - 2400 blows/min - 114L/min 4.0cfm - 1/4"BSP air inlet - 3.2kg - 52mm wide

Aeq 3.33m/sec²

196.2213 VL223 Chisel Scaler Straight Grip Low Vibration - 12mm square chuck - 2400 blows/min - 114L/min 4cfm - 1/4"BSP air inlet - 2.95kg - 52mm wide

Aeq 2.56m/sec²


196.3203 VL303 Chisel Scaler Pistol Grip Low Vibration - 12mm square chuck - 3000 blows/min - 156L/min 5.5cfm - 1/4"BSP air inlet - 4.25kg - 57mm wide

Aeq 2.3m/sec²

151.5250 Scabbling Hammer Single Head - 2400 blows/min - 198L/min 7cfm - 3/8"BSP air inlet - 2.6kg - 55mm wide - Bush Hammer tip

196.5105 Scabbling Hammer Single Head Low Vibration - 3000 blows/min - 298L/min 10.5cfm - 3/8"BSP air inlet - 2.7kg - 55mm wide - Bush Hammer tip

153.6051 Scabbling Hammer Triple Head - 3 x 2800 blows/min - 450L/min 15.9cfm - 3/8"BSP air inlet - 4.7kg - 163mm wide - Bush Hammer tips

150.5001 LPS55 Pole Scabbler - 1100 blows/min - 708L/min 25cfm - 1/4"BSP air inlet - 35m/sec² vib. - 13.4kg - 80mm wide - 5 point tip

159.5075 MHS5 Floor Scabbler Five Head Low Vibration - 300mm cutting width - 5 x 1200 blows/min - 2280L/min 80cfm - 3/4"BSP air inlet - 117kg - 740mm wide - 9 point tips - For concrete floors

J-1





J-2


159.5910 SF11 Deck Scaler Eleven Head - 11 x 3000 blows/min - 252mm cutting width - 1982L/min 70cfm - 3/4"BSP air inlet - 36kg - 282mm wide - Cruciform tips for steel decks

159.6050 MHS11 Floor Scabbler Eleven Head Low Vibration - 250mm cutting width - 11 x 2200 blows/min - 1560L/min 55cfm - 3/4"BSP air inlet - 70kg - 285mm wide - Bush Hammer tips - For concrete floors

150.5021 LPS55 Pole Compactor - 125mm x 150mm rectangular foot

- 1100 blows/min - 708L/min 25cfm - 1/4"BSP air inlet - 13.5kg

150.5030 LPS55 Pole Compactor - 100mm square foot - 1100 blows/min - 708L/min 25cfm - 1/4"BSP air inlet - 13.5kg

150.5031 LPS55 Pole Compactor - 125mm round foot - 1100 blows/min - 708L/min 25cfm - 1/4"BSP air inlet - 13.5kg

136.3598 Long Reach Stripper Lightweight model - 1500mm long - 5/8" hex. chuck - 2200 blows/min - 126L/min 4.5cfm - 3/8"BSP air inlet - For blade options see pages m-6 & m-7


136.3200 Long Reach Stripper - 600mm long - 5/8" hex. chuck - 2200 blows/min - 126L/min 4.5cfm - 3/8"BSP air inlet - For chisel and blade options see pages m-6 & m-7

136.3500 Long Reach Stripper - 1500mm long - 5/8" hex. chuck - 2200 blows/min - 126L/min 4.5cfm - 3/8"BSP air inlet - For chisel and blade options see pages m-6 & m-7

137.3500 Long Reach Needle Scaler - 1500mm long - Needle scaler head with 28 x 3mm carbon steel needles

- 2200 blows/min - 126L/min 4.5cfm - 3/8" BSP air inlet - For needles see pages B-10 & B-11

Blade assembly extra

Chisel or blade assembly extra

Chisel or blade assembly extra



J-4

Trelawny Chisels & Stripper BladesPRODUCT NO. IMAGE PRODUCT DESCRIPTION BARCODE

704.1101 19mm Chisel - 12mm sq shank - 158mm long - Weld spatter removal

704.3101 Low Vibration 19mm Chisel - 12mm sq shank - 158mm long - Weld spatter removal

704.1103 64mm Chisel - 12mm sq shank - 178mm long - Removal of peeling paint and rust

704.3103 Low Vibration 64mm Chisel - 12mm sq shank - 178mm long - Removal of peeling paint and rust

704.1105 64mm Chisel - 12mm sq shank - 254mm long - Removal of peeling paint and rust

704.3105 Low Vibration 64mm Chisel - 12mm sq shank - 254mm long - Removal of peeling paint and rust


704.1106 Chasing Chisel - 12mm sq shank - 6mm wide - 203mm long - Mortar removal for re-pointing brick work

704.1107 19mm Chisel - 12mm sq shank - 254mm long - Weld spatter and sand cast cleaning

704.3107Low Vibration 19mm Chisel - 12mm sq shank - 254mm long - Weld spatter and sand cast cleaning

704.1110 50mm Spark Resistant Chisel - Aluminium bronze - 12mm sq shank - 178mm long - For use in hazardous areas

704.3110Low Vibration 50mm Spark Resistant Chisel - Aluminium bronze - 12mm sq shank - 178mm long - For use in hazardous areas

704.1112 Moil Point - 12mm sq shank - 178mm long - Concrete chipping

N-1J-3





J-5

Trelawny Chisels & Stripper BladesPRODUCT NO. IMAGE PRODUCT DESCRIPTION BARCODE

705.1112 100mm Spark Resistant Chisel - Aluminium bronze - 5/8" hex shank - 203mm long - For use in hazardous areas

705.2102 100mm Cranked Chisel - 5/8" hex shank - 203mm long - Floor tile removal

708.1100 Comb Holder - 5/8" hex shank - 203mm long - For use with scutch comb insert

708.1101 Scutch Comb Insert - 25mm high - 38mm long - Brick cleaning and reclamation

431.3504 102mm Square Edge Blade Assembly - 5/8" hex shank - Blade holder - 102mm square edge blade

- For removal of paint and adhesive

439.3504 Pack of Five 102mm Square Edge Blades - For use with 641.3512 Blade Holder


704.2105 35mm Cranked Chisel - 12mm sq shank - 35mm wide - 178mm long - Weld flux and thick coating removal

704.3205 Low Vibration 35mm Cranked Chisel - 12mm sq shank - 178mm long - Weld flux and thick coating removal

705.1100 50mm Spark Resistant Chisel - Aluminium bronze - 5/8" hex shank - 229mm long - For use in hazardous areas

705.1101 25mm Chisel - 5/8" hex shank - 229mm long - Sand casting chipping

705.1102 100mm Chisel - 5/8" hex shank - 203mm long - Asphalt cutting

705.1106 50mm Chisel - 5/8" hex shank - 229mm long - Linoleum removal

J-4





- For removal of paint and coating spillage



- Carpet and tile removal


431.3904 102mm Bevel Edge Blade Assembly - 5/8" hex shank - Blade holder - 102mm Bevel edge blade

- Stubborn adhesive material

439.3524 Pack of Five 102mm Bevel Edge Blades - For use with 641.3512 Blade Holder



- Carpet and tile removal

439.3528 Pack of Five 203mm Bevel Edge Blades - For use with 641.3512 Blade Holder


- Adhesive removal

439.3522 Pack of Four 305mm Bevel Edge Blades - For use with 641.3512 Blade Holder

641.3512 Blade Holder - 5/8" hex shank - Takes 102mm, 203mm and 305mm stripper blades

Trelawny Chisels & Stripper Blades

J-5

Price List



K-1

PRODUCT NO. PAGE PRODUCT DESCRIPTION PACK PACK PRICE

133.3100 J-1 3BPG Needle Scaler, Pistol Grip 1 $705.00

136.3200 J-2 Long Reach Stripper, Standard Model, 600mm long 1 $1,080.00

136.3500 J-2 Long Reach Stripper, Standard Model, 1500mm long 1 $1,260.00

136.3598 J-2 Long Reach Stripper, Lightweight Model, 1500mm long 1 $1,550.00

137.3500 J-2 Long Reach Needle Scaler, 1500mm long 1 $1,380.00

150.5001 J-1 LPS55 Pole Scabbler, five point tip 1 $1,550.00

150.5021 J-2 LPS55 Pole Compactor, 125mm x 150mm foot 1 $1,550.00

150.5030 J-2 LPS55 Pole Compactor, 100mm x 100mm foot 1 $1,550.00

150.5031 J-2 LPS55 Pole Compactor, 125mm dia round foot 1 $1,550.00

151.5250 J-1 Scabbling Hammer, Single Head, Bush Hammer tip 1 $575.00

153.6051 J-1 Scabbling Hammer, Triple Head, Bush Hammer tips 1 $1,120.00

159.5075 J-1 MHS5 Floor Scabbler, Five Head, nine point tips, Low Vib 1 $11,500.00

159.5910 J-2 SF11 Deck Scaler, Eleven Head 1 $5,300.00

159.6050 J-2 MHS11 Floor Scabbler, Eleven Head, Bush Hammer tips, L Vib 1 $7,400.00

196.2003 J-1 VL203 Needle Scaler, Pistol Grip, Low Vibration 1 $995.00

196.2103 J-1 VL223 Needle Scaler, Straight Grip, Low Vibration 1 $995.00

196.2203 J-1 VL203 Chisel Scaler, Pistol Grip, Low Vibration 1 $995.00

196.2213 J-1 VL223 Chisel Scaler, Straight Grip, Low Vibration 1 $995.00

196.3003 J-1 VL303 Needle Scaler, Pistol Grip, Low Vibration 1 $1,180.00

196.3203 J-1 VL303 Chisel Scaler, Pistol Grip, Low Vibration 1 $1,180.00

196.5105 J-1 Scabbling Hammer, Single Head, Bush Hammer tip, Low Vib. 1 $680.00

431.3504 J-4 102mm Square Edge Blade Assembly 1 $235.00



431.3904 J-5 102mm Bevel Edge Blade Assembly 1 $235.00



439.3504 J-4 Paxk of Five 102mm Square Edge Blades 1 $110.00

439.3508 J-5 Paxk of Five 203mm Square Edge Blades 1 $120.00

439.3512 J-5 Paxk of Four 305mm Square Edge Blades 1 $110.00

439.3522 J-5 Pack of Four 305mm Bevel Edge Blades 1 $115.00

439.3524 J-5 Pack of Five 102mm Bevel Edge Blades 1 $125.00

439.3528 J-5 Pack of Five 203mm Bevel Edge Blades 1 $160.00

641.3512 J-5 Blade Holder 1 $110.00

704.1101 J-3 19mm Chisel, 12mm sq shank, 158mm long, suit std scalers 1 $50.00



704.1106 J-3 Chasing Chisel, 12mm sq shank, 6mm wide, suit std. scalers 1 $80.00



704.1110 J-3 50mm Spark Resistant Chisel, Alum Bronze, 12mm sq shank 1 $360.00



704.3101 J-3 Low Vibration 19mm Chisel, 12mm sq shank, 158mm long 1 $50.00




704.3110 J-3 Low Vibration 50mm Spark Resistant Chisel, Alum Bronze 1 $340.00

704.3205 J-4 Low Vibration 35mm Cranked Chisel, 12mm sq shank 1 $50.00

705.1100 J-4 50mm Spark Resistant Chisel, Aluminium Bronze, 5/8"hex sh 1 $400.00

705.1101 J-4 25mm Chisel, 5/8"hex shank, 229mm long 1 $80.00



705.1112 J-4 100mm Spark Resistant Chisel, Aluminium Bronze, 5/8"hex sh 1 $500.00

705.2102 J-4 100mm Cranked Chisel, 5/8"hex shank, 203mm long 1 $100.00

708.1100 J-4 Comb Holder, 5/8"hex shank, 203mm long, takes 708.1101 1 $190.00

708.1101 J-4 Scutch Comb Insert, 38mm long, fits 708.1100 Comb Holder 1 $4.30

AA-100 B-1 Hexagon Bit Holder, for 1/4" hex driver bits and drills 1 $50.00

AA-10330040 C-1 Abrasive Belt, 10mm x 330mm x 40grit 10 $19.90




AA-1507040 C-1 Abrasive Disc, 150mm x 40grit, Hook & Loop 1 $1.53









AA-2003 B-4 4 Piece Chisel Set 1 $20.00





AA-2107A040 C-1 Abrasive Disc, 50mm x 40grit, Hook & Loop 1 $1.75

Price List


K-2














AA-3102060 C-2 Abrasive Disc, 75mm x 60grit,Hook & Loop 1 $2.15




AA-406EM B-1 Eraser Wheel Mandrel, 1/4"dia shank, 5/16"-24 female thread 1 $5.00

AA-406ES B-1 Eraser Wheel, plain, 5/16"-24 thread 1 $12.00

AA-406ET B-1 Toothed Eraser Wheel, 5/16"-24 thread 1 $14.00

AA-5000 B-1 Needle Scaler Attachment, 19x3mm needles, suits AL-4200 1 $70.00

AA-5001 B-1 Chisel Quick Change Retainer, alternative to AA-5002 spring 1 $32.00

AA-5002 B-1 Chisel Retaining Spring for AL-4200,4201,4202 and similar 1 $18.00

AA-5007 B-1 1/4" In-Line Mini Oiler, 1/4"MBSPx1/4"FBSP 1 $60.00

AA-5011 B-1 1/4" Speed Regulator, 1/4"MBSPx1/4"FBSP 1 $14.00

AA-5012 B-1 1/4" In-Line Regulator, 1/4"MBSPx1/4"FBSP 1 $20.00

AA-5014 B-1 Clip-on Tyre Chuck, Sealing, 1/4"FBSP inlet 1 $20.00

AA-5017 B-1 Dual Tyre Chuck, Sealing, 1/4"FBSP inlet 1 $27.00

AA-6000 B-2 Tool Balancer, 0.5-1.5kg capacity, 1.3m cable travel, 0.73kg wt 1 $110.00




AA-60726 B-2 150mm Vinyl Face Orbital Sanding Pad, 6hole, 5/16"-24 male 1 $30.00

AA-60796 B-2 150mm Hook & Loop Orbital Sanding Pad, 7hole, 5/16"-24 m 1 $36.00

AA-60799 B-2 150mm Hook & Loop Orbital Sanding Pad, 15hole, 5/16"-24 m 1 $49.00

AA-60805 B-2 125mm Hook & Loop Disc Sanding Pad, 5/8"-11 fem. thread 1 $33.00

AA-60805M B-2 125mm Hook & Loop Disc Sanding Pad, M14 x 2.0 fem. thread 1 $33.00

AA-60806 B-2 150mm, Hook & Loop Disc Sanding Psd, 5/8"-11 fem. thread 1 $33.00



AA-60807 B-2 180mm Hook & Loop Disc Sanding Pad, 5/8"-11 fem. thread 1 $43.00


AA-60808 B-3 200mm Hook & Loop Disc Sanding Pad, 5/8"-11 female thread 1 $68.00

AA-60808M B-3 200mm Hook & Loop Disc Sanding Pad, M14 x 2.0 fem. Thread 1 $68.00

AA-60812 B-3 125mm Spiralcool Disc Sanding Pad, M14x2.0, 13,000rpm 1 $70.00

AA-60814 B-3 125mm Spiralcool Disc Sanding Pad, 5/8"-11, 13,000rpm 1 $70.00

AA-60815 B-3 178mm Spiralcool Disc Sanding Pad, M14x2.0, 7000rpm 1 $100.00

AA-60816 B-3 178mm Spiralcool Disc Sanding Pad, 5/8"-11, 7000rpm 1 $100.00

AA-60817 B-3 230mm Spiralcool Disc Sanding Pad, M14x2.0, 6500rpm 1 $110.00

AA-60818 B-3 230mm Spiralcool Disc Sanding Pad, 5/8"-11, 6500rpm 1 $110.00

AA-60819 B-3 Spiralcool Centre Nut, M10x1.25 1 $25.00


AA-60821 B-3 Spiralcool Centre Nut, 5/8"-11 1 $25.00


AA-60823 B-4 Spiralcool Pin Spanner for Centre Nuts 1 $27.00

AA-760908 C-2 75mm Cut Off Wheel, 1.2mm thick, 9.35CH 1 $3.00

AA-801 B-4 Automotive Tie Rod Tool,10.2mm shank,30mm dia x 115mm 1 $50.00

AA-802 B-4 Automotive Tail Pipe Cutter, 10.2mm shank, 32mm wide 1 $30.00

AA-803 B-4 Automotive Fork Chisel, 10.2mm shank, 30mm wide x 155mm 1 $86.00

AA-803M B-4 Automotive Fork Chisel, 10.2mm shank, 41mm wide x 174mm 1 $86.00

AA-804 B-4 Automotive Bushing Remover, 10.2mm shnk, 35mm wide 1 $25.00

AA-805 B-4 Automotive Cranked Wide Chisel, 10.2mm shank, 32mm wide 1 $28.00

AA-806 B-4 Automotive Bushing Splitter, 10.2mm shank, 13mm dia 1 $30.00

AA-807 B-4 Automotive Sheet Metal Cutter, 10.2mm shnk, 17mm wide 1 $40.00

AA-808 B-4 Automotive Muffler Cutter, 10.2mm shank, 16mm wide 1 $38.00

AA-809 B-5 Automotive Double Edge Panel Cutter, 10.2mm shank, 18mm 1 $38.00

AA-810 B-5 Automotive Flat Chisel, 10.2mm shank, 19mm wide x 176mm 1 $22.00

AA-811 B-5 Automotive Long Flat Chisel, 10.2mm shank, 19mm wide 1 $25.00

AA-812 B-5 Automotive Tapered Punch, 10.2mm shank, 13mm dia 1 $22.00

AA-813 B-5 Automotive Rivet Cutter Chisel, 10.2mm shank, 20mm wide 1 $23.00

AA-814 B-5 Automotive Chisel Blank, 10.2mm shank, 13mm dia x 180mm 1 $18.00

AA-815 B-5 Automotive Spot Weld Breaker, 10.2mm shank, 19mm wide 1 $29.00

AA-816 B-5 Automotive Sheet Metal Cutter, 10.2mm shank, 19mm wide 1 $32.00

AA-817 B-5 Automotive Bushing Driver, 10.2mm shank, 33mm dia 1 $50.00

AA-818 B-5 Automotive Cranked Flat Chisel, 10.2mm shank, 20mm wide 1 $24.00

AA-819 B-5 Automotive Sheet Metal Punch, 10.2mm shank, 13mm dia 1 $22.00

AA-820 B-5 Automotive Panel Crimper, 10.2 mm shank,90mm wide 1 $170.00

AA-821 B-6 Automotive Smoothing Tool, 10.2mm shank, 30mm dia 1 $53.00

All prices are recommended list price exclusive of GST

Price List




AA-822 B-6 Automotive Straight Punch, 10.2mm shank, 9mm dia x 148mm 1 $18.00

AA-823 B-6 Automotive Paint Scraper, 10.2mm shank, 63mm wide 1 $55.00

AA-824 B-6 Automotive Shock Absorber Chisel, 10.2mm shank 19mm wide 1 $26.00

AA-825 B-6 Automotive Moil Point, 10.2mm shank, 13mm dia x 178mm 1 $20.00

AA-D42 B-6 Spindle Adaptor, 7/16"-20 female x 1/4"-20 male 1 $27.00

AA-D43 B-6 Spindle Adaptor, 7/16"-20 female x Trimcut male 1 $18.00

AA-D44 B-6 Spindle Adaptor 5/8"-11 female x M14x2.0 male 1 $80.00

AA-D45 B-6 Spindle Adaptor M14X2.0 female x M14x2.0 male 1 $80.00

AA-D46 B-6 Spindle Adaptor M14x2.0 female x 5/8"-11 male 1 $80.00

AA-EM4 B-6 Ez-Lok Mandrel, 1/4"dia shank to Ez-Lok male thread 1 $5.00

AA-HLS75110040 C-2 Abrasive Sheet, 75 x 110 x 40grit Hook & Loop 1 $1.40







AA-KL1238 B-7 Plastic Keyless Chuck, 12mm capacity, 3/8"-24 mount 1 $110.00

AA-KL3838 B-7 Plastic Keyless Chuck, 10mm capacity, 3/8"-24 mount 1 $55.00

AA-KP1238M B-7 Metal Keyless Chuck, 13mm capacity, 3/8"-24 mount 1 $220.00

AA-KP3838M B-7 Metal Keyless Chuck, 10mm capacity, 3/8"-24 mount 1 $150.00

AA-QMD50040 C-3 Abrasive Disc, 50mm x 40grit, Quick Mount 10 $25.00








AA-RC1238 B-7 Light Duty Keyed Chuck, 13mm capacity, 3/8"-24 mount 1 $30.00

AA-RC3838H B-7 Heavy Duty Keyed Chuck, 10mm capacity, 3/8"-24 mount 1 $20.00

AA-RC3838L B-7 Light Duty Keyed Chuck, 10mm capacity, 3/8"-24 mount 1 $15.00

AA-RD050 B-7 50mm Rubber Ez-Lok Backing Pad, 1/4"-20 female thread 1 $12.00

AA-RD075 B-7 75mm Rubber Ez-Lok Backing Pad, 1/4"-20 female thread 1 $14.00

AA-SCD50BLF C-3 Abrasive Disc, 50mm Blue Fine Surface Cond, Quick Mount 10 $24.00

AA-SCD50BRC C-3 Abrasive Disc, 50mm Brown Coarse Surface Cond, Quick Mount 10 $24.00

AA-SCD50MAM C-3 Abrasive Disc, 50mm Maroon Med Surface Cond, Quick Mount 10 $24.00

AA-SCD75BLF C-3 Abrasive Disc, 75mm Blue Fine Surface Cond, Quick Mount 10 $45.00


AA-SCD75BRC C-3 Abrasive Disc, 75mm Brown Coarse Surface Cond, Quick Mount 10 $45.00

AA-SCD75MAM C-3 Abrasive Disc, 75mm Maroon Med Surface Cond, Quick Mount 10 $45.00

AA-TM4 B-6 Trimkut Mandrel, 1/4"dia shank to Trimkut male thread 1 $11.00

ABV-108 E-1 Ball Valve, Zinc Alloy, 1/4"FBSP x 1/4"FBSP 1 $20.00




ABV-125 E-1 Ball Valve, Zinc Alloy, 1"FBSP x 1"FBSP 1 $50.00

AC1PF4 E-3 Cejn Style Metal Plug, 1/4"FBSP 2 $6.10



AC1PH6 E-3 Cejn Style Metal Plug, 3/8"ID Hose Tail 2 $7.00

AC1PH8 E-3 Cejn Style Metal Plug, 1/2"ID Hose Tail 2 $9.50

AC1PM4 E-3 Cejn Style Metal Plug, 1/4"MBSP 2 $6.00



AC1PSH E-3 Cejn Style Metal Plug, Schrader Valve Female Thread 2 $6.00

AC1SF4 E-3 Cejn Style Metal Socket, 1/4"FBSP 1 $19.00



AC1SH6 E-3 Cejn Style Metal Socket, 3/8"ID Hose Tail 1 $20.00

AC1SH8 E-3 Cejn Style Metal Socket, 1/2"ID Hose Tail 1 $21.00

AC1SM4 E-4 Cejn Style Metal Socket, 1/4"MBSP 1 $20.00



ACD-1041 H-1 Direct Drive 12 Volt DC Electric Compressor, 4.0cfm, 116psi 1 $430.00

ACD-1043 H-1 Direct Drive 24 Volt DC Electric Compressor, 4.0cfm, 116psi 1 $430.00

ACD25063 H-1 Air Inlet Filter, Suits ACD-25 Air Compressor 1 $12.00

ACO-1000 B-7 1 Litre Air Compressor Oil, for piston compressors 1 $20.00

ACO-5000 B-7 5 Litre Air Compressor Oil, for piston compressors 1 $74.50

AG-4 A-1 Air Blow Gun, 100mm, 1/4" Metal Inlet Bush 1 $15.00

AG-4L A-1 Air Blow Gun, 330mm, 1/4" Metal Inlet Bush 1 $20.00

AG-6 A-1 Inline Blow Gun, Metal Body, Rubber Tip, 1/4" air inlet 1 $20.00

AG-747 G-1 Cleaning Gun, 1800mm long, Claw coupling, 2.75kg 1 $395.00

AH10010 E-1 Air Hose, Braided PVC, 10mm ID x 10m long, plain ends 1 $21.50

AH10010AC E-1 Air Hose, 10mm ID x 10m, Alliance C Series Quick Couplers 1 $52.00

AH10010AN E-2 Air Hose, 10mm ID x 10m, Alliance N Series Quick Couplers 1 $46.50

AH10010AR E-2 Air Hose, 10mm ID x 10m, Alliance R Series Quick Couplers 1 $47.50


K-3

Price List







AH10030 E-1 Air Hose,,Braided PVC, 10mm ID x 30m long, plain ends 1 $65.00




AH1006 E-2 Coil Hose, Braided Pu, 6.5mm ID x 4.5m W/L, 1/4"MBSP ends 1 $50.00

AH1010 E-2 Coil Hose, Braided Pu, 6.5mm ID x 7.5m W/L, 1/4"MBSP ends 1 $60.00





AH-1015MR E-3 Air/Water Hose Reel, Spring Retractable, 10mm ID x 15m hose 1 $210.00











AH1505 E-2 Coil Hose, Braided Pu, 10mmID x 4.5m W/L, 1/4"MBSP ends 1 $76.00

AH1512 E-2 Coil Hose, Braided Pu, 10mmID x 7.5m W/L, 1/4"MBSP ends 1 $117.00

AH2PF4 E-4 HyFlo Metal Plug, 1/4"FBSP 1 $3.80

AH2PH5 E-4 HyFlo Metal Plug, 5/16"ID Hose Tail 1 $3.80



AH2PM4 E-4 HyFlo Metal Plug, 1/4"MBSP 1 $3.80

AH2PM6 E-4 HyFlo Metal Plug, 3/8"MBSP 1 $3.80

AH2SF4 E-4 HyFlo Metal Socket, 1/4"FBSP 1 $23.00

AH2SF8 E-4 HyFlo Metal Socket, 1/2"FBSP 1 $23.00

AH2PF8 E-4 HyFlo Metal Socket, 1/2"FBSP 1 $23.00

AH2SH5 E-4 HyFlo Metal Socket, 5/16"ID Hose Tail 1 $23.00




AH2SM4 E-4 HyFlo Metal Socket, 1/4"MBSP 1 $23.00

AH2SM6 E-4 HyFlo Metal Socket, 3/8" MBSP 1 $23.00

AH2SM8 E-4 HyFlo Metal Socket, 1/2"MBSP 1 $23.00

AL-1000 D-1 1/4" Filter/Regulator, 1/4"FBSP ports, 9.6bar 140psi max, 50um 1 $95.00

AL-1010 D-1 1/4" Filter/Regulator/Lubricator, 1/4"FBSP ports, 140psi max 1 $174.00

AL-1018 A-1 High Production Spray Gun, 1 litre cup, 1.8mm Fluid Tip 1 $178.00

AL-1020 A-1 Gravity Spray Gun, 600ml Cup, 1.8mm Fluir Tip, 312L/min 1 $208.00

AL-1070 A-1 Professional Quality Finishing Spray Gun, I litre Cup, 2.0mm Tip 1 $217.00

AL-1200 A-1 10mm Straight Drill, Non reversible, Swivel Exhaust, Var Speed 1 $150.00

AL-1202 A-1 10mm Reversible Angle Drill/Screwdriver, 1800rpm, 170L/min 1 $265.00

AL-1203 A-1 10mm Reversible Drill/Screwdriver, 1800rpm, 170L/min 6cfm 1 $150.00

AL-1203K A-1 10mm Reversible Drill/Screwdriver, Plastic Keyless Chuck 1 $205.00

AL-1203MK A-1 10mm Reversible Drill/Screwdriver, Metal Keyless Chuck 1 $300.00

AL-1203QC A-1 1/4" Hex. Drive Screwdriver/Drill, Takes 1/4" hex bits, Rev. 1 $200.00

AL-1204 A-2 13mm Reversible Drill/Screwdriver, 1800rpm, 170L/min 6cfm 1 $260.00

AL-1204K A-2 13mm Reversible Drill/Screwdriver, Plastic Keyless Chuck 1 $360.00

AL-1204MK A-2 13mm Reversible Drill/Screwdriver, Metal Keyless Chuck 1 $470.00

AL-1207 A-2 13mm Reversible Drill/Screwdriver, Composite Body 1 $407.00

AL-1207MK A-2 13mm Reversible Drill/Screwdriver, C B, Metal Keyless Chuck 1 $570.00

AL-1213 A-2 Heavy Duty Tyre Buffer - Quick change chuck/mandrel 1 $195.00

AL-1214 A-2 Adjustable Clutch Screwdriver, 1/4" hex dr, 6mm cap, 12Nm 1 $245.00


AL-1216 A-2 Adjustable Clutch Screwdriver, 1/4" hex dr, 4mm cap, 3.0Nm 1 $260.00


AL-1221 A-2 Auto Shut-Off Screwdriver, Push Start, 1/4" hex dr, 1400rpm 1 $1,100.00



AL-1223L A-3 Auto Shut-Off Screwdriver, Lever Start, 1/4" hex dr, 550rpm 1 $1,140.00


AL-1224L A-3 Auto Shut-Off Screwdriver, Lever Start, 1/4" hex dr, 300rpm 1 $1,140.00

AL-1241 A-3 Auto Shut-Off Screwdriver, Soft Grip, 3 air inlets, 1700rpm 1 $1,100.00





AL-1262 A-3 Impact Screwdriver, Twin Hammer, 1/4" hex dr, 8000rpm 1 $440.00

AL-1265 A-3 Impact Screwdriver, Double Hammer, 1/4" hex dr, 1000rpm 1 $190.00


K-4

Price List




AL-1268 A-3 19mm Reversible D-Handle Drill, 1000rpm, 424L/min 15cfm 1 $1,400.00

AL-1301K A-4 1/8" Micro Die Grinder Kit, Roll Throttle, 1/8" collet, 3mm opt. 1 $190.00

AL-1305 A-4 1/8" Micro Angle Die Grinder Kit, Roll Throttle, 1/8" std collet 1 $330.00

AL-1310 A-4 1/4" Mini Die Grinder, V Speed, Swivel Exhaust, 1/4" std collet 1 $100.00

AL-1310K A-4 1/4" Mini Die Grinder Kit, 10 Mounted Stones, 1/4" std collet 1 $130.00

AL-1312 A-4 1/4" Mini Angle Die Grinder, V Speed, Swivel Exh, 1/4" std coll 1 $155.00

AL-1312K A-4 1/4" Mini Angle Die Grinder Kit, 10 Mounted Stones, 5x50mm 1 $195.00

AL-1320 A-4 1/4" Die Grinder, V Speed, Swivel Exh, 1/4" std collet, 6mm 1 $120.00

AL-1320K A-4 1/4" Die Grinder Kit, 10 Mounted Stones, 1/4" std collet 1 $150.00

AL-1321 A-4 1/4" Extended Die Grinder, V Speed, Swivel Exh, 1/4" std collet 1 $230.00

AL-1322 A-4 1/4" Angle Die Grinder, V Speed, Swivel Ex, 1/4" std collet 1 $172.00

AL-1322K A-4 1/4" Angle Die Grinder Kit, 10 Mounted. Stones, 5x50mm + 1 $250.00

AL-1330 A-4 50mm Angle Grinder/Sander, V Speed, Swivel Exh 1 $230.00

AL-1330R A-5 50mm Angle Grinder/Sander, V Speed, Swivel Exh 1 $230.00

AL-1340 A-5 75mm Panel Cutter, V Speed, Swivel Exh, 75 x 1.6 x 9.35CH diac 1 $130.00

AL-1344 A-5 100mm Heavy Duty Angle Grinder, Heavy duty bevel gears 1 $510.00

AL-1345 A-5 125mm Heavy Duty Angle Grinder, L Throttle, HD Bevel Gears 1 $550.00

AL-1345R A-5 125mm Heavy Duty Angle Grinder, R Throttle, HD Bevel Gears 1 $550.00

AL-1345W A-5 125mm Heavy Duty Wet Grinder, L Throttle, 22.2CH, 10900rpm 1 $760.00

AL-1347 A-5 180mm Heavy Duty Angle Grinder, L Throttle, 22.2CH, 7600rpm 1 $785.00

AL-1349 A-5 230mm Heavy Duty Angle Grinder, HD Bevel Gears, 5900rpm 1 $1,320.00

AL-1349W A-5 230mm Heavy Duty Wet Grinder, HD Bevel Gears, 230 x 22.2CH 1 $1,990.00

AL-1359 A-5 230mm Heavy Duty Verticle Grinder, 230 x 6 x 22.2CH disc 1 $1,250.00

AL-1383L A-5 Extended Die/75mm Straight Grinder, Safety Lever Throttle 1 $655.00

AL-1383R A-5 Extended Die/75mm Straight Grinder, Roll Throttle, Side Exh 1 $655.00

AL-1385L A-6 125mm Straight Grinder, Safety Lever Throttle, Side Exhaust 1 $1,100.00

AL-1385R A-6 125mm Straight Grinder, Roll Throttle, Side Exhaust, 7600rpm 1 $1,100.00

AL-1386L A-6 150mm Straight Grinder, Safety Lever Throttle, Side Exhaust 1 $1,150.00

AL-1386R A-6 150mm Straight Grinder, Roll Throttle, Side Exhaust, 6300rpm 1 $1,150.00

AL-1500 A-6 150mm Bar Handle Sander, Dual Action, PSA or Hook Pad 1 $172.00

AL-1501 A-6 150mm Palm Grip Sander, Non Vac, Light Weight Skirt 1 $310.00

AL-1502 A-6 150mm Palm Grip Sander, Self Vac, Light Weight Skirt 1 $330.00

AL-1503 A-6 150mm Palm Grip Sander, Central Vac, Light Weight Skirt 1 $310.00

AL-1507 A-6 75mm Palm Grip Sander, Non Vac, Light Weight Skirt 1 $330.00

AL-1508 A-6 150mm Palm Grip Sander, Central Vac, 2.5mm orbit, 12000rpm 1 $365.00

AL-1509 A-6 150mm Palm Grip Sander, Central Vac, 5mm orbit, 12000rpm 1 $365.00

AL-1511 A-6 75 x 100mm Jitterbug Sander, Non Vac, Hook Face Pad, 3.2mm 1 $310.00

AL-1525 A-7 180mm Angle Disc Sander, Plastic Backing Disc for Fibre Discs 1 $270.00


AL-1551 A-7 125mm High Speed Disc Sander, Comp Body, Noise Reduced 1 $210.00

AL-1552 A-7 50mm Quick Change Disc Sander, Comp Body, Noise Reduced 1 $210.00

AL-1553 A-7 75mm Quick Change Disc Sander, Comp Body, Noise Reduced 1 $220.00

AL-1554 A-7 75mm Orbital Action Sander, Comp Body, Noise Reduced 1 $260.00

AL-1555 A-7 75mm Single Action Polisher, Composite Body, Hook Face Pad 1 $270.00

AL-1556 A-7 75mm Quick Change Disc Polisher, Composite Body, Noise red. 1 $270.00

AL-1557 A-7 180mm Angle Polisher, Plastic Backing Disc for Polishing Pads 1 $290.00

AL-1620 A-7 Wonder Gun, Vacuum/Blow, Qhick Change lever 1 $99.00

AL-1781 A-7 Reciprocating Saw, 90mm x 24TPI std. blade, 14, 18, 32TPI opt. 1 $197.00

AL-1850 A-7 12mm Pistol Tapper, M2-M12 capacity, 1 x tap Holder, 2.0kg 1 $2,260.00

AL-1953 A-7 Sheet Metal Shear, Double Blade, Swivel Exhaust, 0.9mm cap. 1 $188.00

AL-1965 A-8 Sheet Metal Nibbler, Push Type, 1.5mm cap, 2500spm, 4.5mm cw. 1 $210.00

AL-2000 D-1 1/2" Filter/Regulator, 1/2"FBSP ports, 9.6bar 140psi max 50um 1 $146.00

AL-20020CF G-1 Air Hose, Claw coupling ends, H/D Braided Rubber, 20mmID 1 $195.00

AL-2010 D-1 1/2" Filter/Regulator/Lubricator, 1/2"FBSP ports, 9.6bar 140psi 1 $230.00

AL-205DK C-3 Abrasive Disc, 50mm Surface Conditioning Kit 1 $21.00

AL-2211 A-8 3/8"Sq Dr Impact Wrench,12mm bolt cap, 271Nm 200ft-lb, 1 $288.00

AL-2251 A-8 Butterfly Throttle Impact Wrench, 3/8" square drive, 10mm bolt 1 $150.00

AL-2314 A-8 1/4" Mini Ratchet Wrench, 250rpm, 33Nm 25ft-lb, 0.5kg 1 $165.00

AL-2315 A-8 3/8" Mini Ratchet Wrench, 250rpm, 33Nm 25ft-lb, 0.5kg 1 $165.00

AL-2316-15 A-8 Mini Through Ratchet Wrench, 15mm A/F hex. Ring, 450rpm 1 $330.00

AL-2316K A-8 Mini Through Ratchet Kit, 17mm A/F hex. ring, 450rpm, 40Nm 1 $425.00

AL-2340 A-8 3/8"Heavy Duty Ratchet Wrench, Twin Pawl Head, 160rpm 1 $235.00

AL-2345 A-8 1/2"Heavy Duty Ratchet Wrench, Twin Pawl Head, 160rpm 1 $235.00

AL-2352 A-8 COMMANDO Super Duty Mini 1/2"Impact Wrench. Alum. Body 1 $355.00

AL-2359 A-8 Heavy Duty 1/2"Impact Wrench, Al. Body, Twin Hammer Clutch 1 $360.00

AL-2359-2 A-8 Heavy Duty 1/2"Impact Wrench 2"Ext Anvil, Al. Body, TH Clutch 1 $390.00

AL-2360 A-9 WARRIOR 1 Super Duty 1/2" Impact Wrench, Composite Body 1 $380.00

AL-2360-2 A-9 WARRIOR 2 Super Duty 1/2" Impact Wrench 2"Ext. Anvil 1 $440.00

AL-2423 A-9 3/4"Standard Duty Impact Wrench, Al. Body, 1085Nm 800ft-lb 1 $718.00

AL-2423-6 A-9 3/4"Standard Duty Impact Wrench 6" Ext. Anvil, 1085Nm 1 $791.00

AL-2450 A-9 Palm Grip Bump Hammer, Push To Start, Two different tips 1 $301.00

AL-2480 A-9 Engraving Pen, Hardened Tip, 1480mm hose, 0.25kg, 1/4" inlet 1 $265.00

AL-25020CF G-1 Air Hose, Claw Coupling Ends, H/D Braided Rubber, 25mmID 1 $250.00

AL-2538 A-9 1"D-Handle Impact Wrench, Al. Body, Twin Hammer, 2441Nm 1 $1,750.00

AL-2538-6 A-9 1"D-Handle Impact Wrench 6"Ext Anvil, Al. Body, 2441Nm 1 $1,920.00

AL-2538P A-9 1"Pistol Grip Impact Wrench, Al. Body, Twin Hammer, 2441Nm 1 $1,900.00

AL-2538P-6 A-9 1"Pistol Grip Impact Wrench 6"Ext Anvil, Al. Body, 2441Nm 1 $1,990.00


K-5

Price List



AL-2545 A-9 1"D-Handle Impact Wrench, Al. Body, Twin Hammer, 3390Nm 1 $3,382.00

AL-2545-8 A-9 1"D-Handle Impact Wrench 8"Ext Anvil, Al. Body, 3390Nm 1 $3,510.00

AL-2655 A-10 1-1/2"D-Handle Impact Wrench, Al. Body, Twin H, 4068Nm 1 $5,650.00

AL-2655-8 A-10 1-1/2"D-Handle Impact Wrench 8"Ext Anvil, Twin H, 4068Nm 1 $6,580.00

AL-305DK C-3 Abrasive Disc, 75mm Surface Conditioning Kit 1 $32.00

AL-3101 A-10 3/16"Blind Riveter, Air/Hydraulic, Non Vac, 720kg traction 1 $235.00

AL-3103 A-10 1/4"Blind Riveter, Air/Hydraulic, Non Vac, 1589kg traction 1 $1,015.00

AL-3114 A-10 10mm Rivet Nut Tool, M10 std madrel, 450rpm, 1.8kg 1 $850.00

AL-3115 A-10 12mm Rivet Nut Tool, M12 std mandrel, 100rpm, 1.9kg 1 $900.00

AL-3118 A-10 Air/Hydraulic Rivet Nut Tool, M4-M10 capacity, 1.5kg 1 $1,250.00

AL-3120 A-10 Professional 3/16"Blind Riveter, Air/Hyd, Vac, 744kg traction 1 $1,360.00

AL-3121 A-10 Professional 1/4"Blind Riveter, Air/Hyd, Vac, 1275kg traction 1 $1,500.00

AL-3122 A-10 Super Duty 1/4"Blind Riveter, Air/Hyd, Vacuum, 1632kg traction 1 $1,915.00

AL-3123 A-10 Professional Rivet Nut Tool, Air/Hyd, 1886kg traction 1 $2,300.00

AL-3254 A-10 Caulking Gun, Al. Body, Takes standard 310ml cartridges 1 $76.00

AL-3256 A-11 Caulking Gun, Al. Body, Fully adjustable, Takes <600ml sausages 1 $300.00

AL-3257 A-11 Caulking Gun, Al. Body, Fully adj, Takes std 310ml cartridges 1 $300.00

AL-3404 A-11 Professional Tyre Inflator, Driveway Quality, Indiv. Calibrated 1 $175.00

AL-40212RM D-1 Pressure Gauge, Rear Mount, 40mm dial, 1/8"BSP, 12bar 170psi 1 $13.00

AL-4200 A-11 Hammer, 2 chisels, 10.2mm dia shank, 66mm stroke, 3000bpm 1 $172.00

AL-4202 A-11 Hammer, 5 chisels, 10.2mm dia shank, 92mm stroke, 2000bpm 1 $195.00

AL-4205 A-11 Pistol Lockseam Hammer, Vibration Reduced, 70mm stroke 1 $450.00

AL-4780 A-11 Sealant Cutter, Rear Exhaust, 57mm offset blade, 20000spm 1 $270.00

AL-4800 A-11 Sheet Metal Punch & Flange Tool, Air/Hyd, 5mm dia x 1.6 cap. 1 $200.00

AL-5010 A-11 10mm Belt Sander, 10 x 330mm belt, 1055m/min, 0.9kg 1 $200.00



AL-50416BM D-1 Pressure Gauge, Bottom mount, 50mm dial, 1/4"BSP, 16bar 1 $13.00

AL-50416RM D-1 Pressure Gauge, Rear mount, 50mm dial, 1/4"BSP 16bar 230psi 1 $13.00

AL-6000 A-11 Heavy Duty Needle Scaler, Cast Al. Body, 28 x 3mm needles 1 $770.00

AL-634 G-1 6-Port Air Manifold, 1 x 2"BSP inlet, 6 x 3/4"BSP outlets 1 $1,500.00

AL-7000 A-11 Pistol Grip Needle Scaler, 19 x 3mm needles, 3700bpm, 2.6kg 1 $470.00

AL-7010 A-11 Pistol Grip Chisel Scaler, 12mm sq. shank, 2700bpm, 2.2kg 1 $435.00

AL-7100 A-11 Straight Needle Scaler, 12 x 3mm needles, 4300bpm, 1.6kg 1 $345.00

AL-7110 A-11 Straight Chisel Scaler, 12mm sq. shank, 4200bpm, 1.6kg 1 $345.00

AL-8000 G-7 1" Turtle In-line Lubricator 1 $135.00

AL-8140 G-1 19kg Pavement Breaker, Optional Muffler, 19kg net weight 1 $1,450.00




AL-8323 G-1 14kg Clay Digger, Optional Muffler, 14kg net weight, 22 x 83mm 1 $1,100.00

AL-8408 G-1 14kg Rivet Buster, 11X Jumbo Steels, 14kg net weight 1 $1,900.00

AL-8411 G-1 15kg Rivet Buster, 11X Jumbo Steels, 15kg net weight 1 $2,300.00

AL-8600 G-2 18kg Backfill Tamper, 150mm hollow C.I. butt, 38mm bore 1 $1,750.00

AL-8709 G-2 4kg Rotary Hammer Drill, 19 x 95mm chuck, 4kg net weight 1 $1,600.00

AL-8720 G-2 7.5kg Rock Drill, 22 x 83mm 7/8" x 3-1/4"chuck, 49.18mm bore 1 $1,750.00

AL-8730 G-2 13kg Rock Drill, 22 x 83mm 7/8" x 3-1/4"chuck, 62mm bore 1 $2,450.00

AL-8760 G-2 28kg Rock Drill, 22 x 83mm 7/8" x 3-1/4"chuck, 67mm bore 1 $3,850.00

AL-8822 G-2 Open Handle Chipping Hammer 50mm Stroke, 0.580"hex chuck 1 $750.00

AL-8824 G-2 Open Handle Chipping Hammer 100mm Stroke, 0.580"hex chuck 1 $900.00

AN09012 G-2 Moil Point, 19 x 95mm shank, 255mm long, suits AL-8709 1 $43.00

AN09013 G-2 Chisel Blank, 19 x 95mm shank, 255mm long, suits AL-8709 1 $43.00

AN09015 G-2 25mm Chisel, 19 x 95mm shank, 300mm long, suits AL-8709 1 $48.00

AN09021 G-2 75mm Chisel, 19 x 95mm shank, 300mm long, suits AL-8709 1 $61.00

AN09022 G-2 Drill Holder K-Taper, 19 x 95mm shank, 150mm long, 1 $55.00

AN09023 G-3 Adaptor - SDS Plus Drill Bits, 19 x 95mm shank, 220mm long 1 $125.00

AN09605 G-3 Bent Spade Chisel,19 x 95mm shank, 60mm wide, 300mm long 1 $80.00

AN15018 G-3 Moil Point, 25 x 83mm 7/8" x 3-1/4"shank, 450mm long 1 $34.00

AN15118 G-3 25mm Chisel, 22 x 83mm 7/8" x 3-1/4"shank, 450mm long 1 $34.00

AN15218 G-3 75mm Chisel, 22 x 83mm 7/8" x 3-1/4"shank, 300mm long 1 $40.00

AN15411 G-3 Asphalt Cutter, 22 x 83mm 7/8" x 3-1/4"shank, 115mm wide 1 $130.00

AN17018 G-3 Moil Point, 25 x 108mm 1" x 4-1/4"shank, 450mm long 1 $41.00

AN17118 G-4 25mm Chisel, 25 x 108mm 1" x 4-1/4"shank, 450mm long 1 $41.00

AN17214 G-4 75mm Chisel, 25 x 108mm 1" x 4-1/4"shank, 300mm long 1 $45.00

AN17511 G-4 Asphalt Cutter, 25 x 106mm 1" x 4-1/4"shank, 115mm wide 1 $150.00

AN18018 G-4 Moil Point, 32 x 160mm 1-1/4" x 6-1/4"shank, 450 mm long 1 $50.00

AN18118 G-4 25mm Chisel, 32 x 160mm 1-1/4" x 6-1/4"shank, 450mm long 1 $50.00


AN18511 G-4 Asphalt Cutter, 32 x 160mm 1-1/4" x 6-1/4"shank, 115mm wide 1 $145.00

AN1PF4 E-4 Nitto Style Metal Plug, 1/4"FBSP 2 $6.50



AN1PH6 E-5 Nitto Style Metal Plug, 3/8"ID Hose Tail 2 $7.00

AN1PH8 E-5 Nitto Style Metal Plug, 1/2"ID Hose Tail 2 $10.00

AN1PM4 E-5 Nitto Style Metal Plug, 1/4"MBSP 2 $6.00




K-6

Price List




AN1PSH E-4 Nitto Style Metal Plug, Schrader Valve Thread 2 $6.50

AN1SF4 E-5 Nitto Style Metal Socket, 1/4"FBSP 1 $16.00



AN1SH6 E-5 Nitto Style Metal Socket, 3/8"ID Hose Tail 1 $17.50

AN1SH8 E-5 Nitto Style Metal Socket, 1/2"ID Hose Tail 1 $18.00

AN1SM4 E-5 Nitto Style Metal Socket, 1/4"MBSP 1 $16.50



AN33010 G-4 Moil Point, 11X Jumbo shank, 254mm long 1 $85.00

AN33110 G-5 25mm Flat Chisel, 11X Jumbo shank, 254mm long 1 $85.00

AN33319 G-5 Backout Punch, 11X Jumbo shank, 254mm long 1 $85.00

AN52008 G-5 Round Blank, 14.7mm, 0.580"hex, Oval Collar, 228mm long 1 $21.00

AN52011 G-5 Round Blank, 14.7mm, 0.580"hex, Oval Collar, 304mm long 1 $26.00

AN52109 G-5 Moil Point, 14.7mm, 0.580"hex, Oval Collar, 228mm long 1 $21.00

AN52112 G-5 Moil Point, 14.7mm, 0.580"hex, Oval Collar, 304mm long 1 $26.00

AN52209 G-5 25mm Chisel, 14.7mm, 0.580"hex, Oval Collar, 228mm long 1 $21.00





AN60018 G-4 Moil Point, 28 X 160mm 1-1/8" x 6-1/4"shank, 450mm long 1 $50.00

AN60118 G-4 25mm Chisel,28 x 160mm 1-1/8" x 6-1/4"shank, 450mm long 1 $50.00


AN60605 G-4 Asphalt Cutter, 28 x 160mm 1-1/8" x 6-1/4"shank, 115mm wide 1 $145.00

AP1PF4 E-5 Nitto Style Plastic Plug, 1/4"FBSP 1 $4.75



AP1PH6 E-5 Nitto Style Plastic Plug, 3/8"ID Hose Tail 1 $4.73

AP1PH8 E-5 Nitto Style Plastic Plug, 1/2"ID Hose Tail 1 $4.73

AP1PM4 E-5 Nitto Style Plastic Plug, 1/4"MBSP 1 $4.73



AP1SF4 E-6 Nitto Style Plastic Socket, 1/4"FBSP 1 $21.50



AP1SH6 E-6 Nitto Style Plastic Socket, 3/8"ID Hose Tail 1 $21.50

AP1SH8 E-6 Nitto Style Plastic Socket, 1/2"ID Hose Tail 1 $21.50


AP1SM4 E-6 Nitto Style Plastic Socket, 1/4"MBSP 1 $23.65



AR13200 G-3 Single Carbide Drill Rod, 19 x 95mm shank, 13mm tip dia 1 $172.00



AR1PF4 E-6 Ryco Style Metal Plug, 1/4"FBSP 2 $6.50



AR1PH6 E-6 Ryco Style Metal Plug, 3/8"ID Hose Tail 2 $7.00

AR1PH8 E-6 Ryco Style Metal Plug, 1/2"ID Hose Tail 2 $8.50

AR1PM4 E-6 Ryco Style Metal Plug, 1/4"MBSP 2 $6.00



AR1PSH E-6 Ryco Style Metal Plug, Schrader Valve Thread 2 $5.00

AR1SF4 E-6 Ryco Style Metal Socket, 1/4"FBSP 1 $15.00



AR1SH6 E-6 Ryco Style Metal Socket, 3/8"ID Hose Tail 1 $16.50

AR1SH8 E-6 Ryco Style Metal Socket, 1/2"ID Hose Tail 1 $17.00

AR1SM4 E-7 Ryco Style Metal Socket, 1/4"MBSP 1 $15.50





ARV-150 D-1 Pressure Regulator, 1/4"BSP ports, 0.5-9.9bar W.P. 1 $50.00

AS-6101 B-7 1/2" Square Drive Impact Socket Set, 10 pce, Chrome Moly 1 $50.00

AS-6105 B-8 1/2" Square Drive Impact Socket Set, 5 pce, Chrome Moly 1 $60.00

AS-6106 B-8 1/2" Square Drive Torque Bar Socket Set, 8 pce, Chrome Moly 1 $160.00

AS-7100 B-8 1/2" Square Drive Thin Wall Impact Flip Socket, Chrome Moly 1 $9.00

AS-7200 B-8 1/2" Square Drive Impact Flip Socket, Chrome Moly, 6 point 1 $9.00

AS-7300 B-8 3/4" Square Drive Budd Wheel Impact Socket 1 $60.00

AS-7400 B-8 3/4" Square Drive Deep Impact Socket 17mm sq. 1 $30.00



ATC-18P C-3 Saw Blade, Straight, 18tpi 10 $24.00




K-7

Price List



ATL-0250 B-8 250ml Air Tool Lubricant 1 $12.00

ATL-1000 B-8 1 litre Air Tool Lubricant 1 $20.00

ATL-5000 B-8 5 litre Air Tool Lubricant 1 $74.50

C-4780-1A B-8 Straight Offset Sealant Blade, 57mm long 1 $18.00

C-4780-1B B-9 Straight Offset Sealant Blade, 90mm long 1 $45.00

C-4780-2C B-9 90° Sealant Blade, 63mm long 1 $40.00

C-4780-2D B-9 90°Sealant Blade, 90mm long 1 $45.00

C-4780-5A B-9 Straight Sealant Blade,35mm long 1 $18.00

C6000-2FTC B-9 2mm CS Flat Tip Scaler Needle, 180mm long 1 $1.86

C6000-3CTC B-9 3mm CS Chisel Tip Scaler Needle, 180mm long 1 $1.96

C6000-3FTB B-9 3mm BC Flat Tip Scaler Needle, 180mm long 1 $5.80



CA12-0200 H-2 Unloader Check Valve 1/2"OD Tube x 3/8" MBSP 1 $58.00

CC3W1 G-6 Claw Coupling, Connector, 3 Way 1 $15.00

CCC12 G-7 Hose Clamp, Bolt Tighten, 1/2"ID Hose 1 $12.00

CCC20 G-7 Hose Clamp, Bolt Tighten, 3/4"ID Hose 1 $12.00

CCC25 G-7 Hose Clamp, Bolt Tighten, 1"ID Hose 1 $15.50

CFS01 G-6 Claw Coupling Seal, Rubber 1 $1.50

CFT12 G-5 Claw Coupling, Female Thread, 1/2"BSP 1 $10.00

CFT20 G-6 Claw Coupling, Female Thread, 3/4"BSP 1 $10.00

CFT25 G-6 Claw Coupling, Female Thread, 1"BSP 1 $10.00

CFWC1 G-7 Whip Check Cable, 3.2mm x 508mm cable, 1/2"to1-1/4"ID Hose 1 $14.00

CHT12 G-6 Claw Coupling, Hose Tail, 1/2"ID Hose 1 $10.00

CHT20 G-6 Claw Coupling, Hose Tail, 3/4"ID Hose 1 $10.00

CHT25 G-6 Claw Coupling, Hose Tail, 1"ID Hose 1 $10.00

CMT12 G-6 Claw Coupling, Male Thread, 1/2"BSP 1 $10.00

CMT20 G-6 Claw Coupling, Male Thread, 3/4"BSP 1 $10.00

CMT25 G-6 Claw Coupling, Male Thread, 1"BSP 1 $10.00

CSLP1 G-6 Claw Coupling, Safety Locking Pin, Spring Wire 1 $1.00

DC25 H-1 Drain Valve, 1/4"BSP 1 $9.00

LGM33-2230 H-1 Load Genie Mark 3 1 $217.00

M-30 D-1 Sub-Micronic Canister Filter, 1/4''F top ports, 1274L/min 45cfm 1 $205.00

M-60 D-1 Sub-Micronic Canister Filter, 1/2''F side ports, 2831L/min 100cfm 1 $205.00

M-723 D-1 Sub-Micronic Filter Element, Replacement element for M-30 and M-60 1 $26.00

MDR-2T H-1 Pressure Switch 2.2kw 12bar 1 $60.00

MDR 3/11 H-1 Pressure Switch 11kw 35bar 1 $262.00

MTA3 E-7 Manifold, 3 Port Round, 1 x 1/4"BSP Inlet, 3 x 1/4"BSP Outlets 1 $10.00


MTA5 E-7 Manifold, 8 Port Straight, 3 x 1/4"BSP Inlets, 5 x 1/4"BSP Outlets 1 $14.00

MUA5 E-7 Manifold, High Vol 5 Port, 2 x 1/2"BSP Inlets, 5 x 1/4"BSP Outlets 1 $45.00

NO24112 E-7 Brass No. 24 Reducing Bush, 1"MBSP x 1/2"FBSP 1 $15.50

NO241214 E-7 Brass No. 24 Reducing Bush, 1/2"MBSP x 1/4"FBSP 2 $7.50



NO24134 E-7 Brass No. 24 Reducing Bush, 1"MBSP x 3/4"FBSP 1 $15.50





NO243814 E-7 Brass No. 24 Reducing Bush, 3/8"FBSP X 1/4"FBSP 2 $4.00


NO251 E-8 Brass No. 25 M & F Elbow, 1"BSP x 1"BSP 1 $35.00

NO2512 E-8 Brass No. 25 M & F Elbow, 1/2"BSP x 1/2"BSP 2 $20.00





NO261 E-8 Brass No. 26 Hexagon Socket, 1"FBSP x 1"FBSP 1 $21.50

NO2612 E-8 Brass No. 26 Hexagon Socket, 1/2"FBSP 2 $11.50





NO271 E-8 Brass No. 27 Hexagon Nipple, 1"MBSP x 1"MBSP 1 $18.00

NO2712 E-8 Brass No. 27 Hexagon Nipple, 1/2"MBSP x 1/2"MBSP 2 $9.30





NO291214 E-8 Brass No. 29 Reducing Socket, 1/2"FBSP x 1/4"FBSP 2 $12.00




NO351 E-9 Brass No. 35 Female Tee, 1"FBSP 1 $36.50

NO3512 E-9 Brass No. 35 Female Tee, 1/2'FBSP 1 $15.00



K-8

Price List





NO3534 E-9 Brass No. 35 Female Tee, 3/4"FBSP 1 $18.00


NO641 E-9 Brass No. 64 Taper Plug, 1"MBSP 1 $14.00

NO6412 E-9 Brass No. 64 Taper Plug, 1/2"MBSP 2 $9.00





NO721212 E-9 Brass No. 72 Adaptor, 1/2"FBSP x 1/2"MBSP 2 $18.50









NO73112 E-10 Brass No. 73 Reducing Nipple, 1"MBSP x 1/2"MBSP 1 $25.50

NO731214 E-10 Brass No. 73 Reducing Nipple, 1/2"MBSP x 1/4"MBSP 2 $15.00


NO73134 E-10 Brass No. 73 Reducing Nipple, 1"MBSP x 3/4"MBSP 1 $19.00






OC5838 E-10 Ear Clip suit 3/8"(10mm)ID Hose 1 $1.20

OC3412 E-10 Ear Clip suit 1/2"(12.5mm)ID Hose 1 $1.50

OPLIER E-10 Ear Clip Crimp Tool 2 $70.00

P101212 E-12 Brass P10 Female Hose Tail, 1/2"Hose x 1/2"FBSP 2 $18.00









P1051614 E-12 Brass.P10 Female Hose Tail, 5/16"Hose x 1/4"FBSP 2 $8.00


P311 E-11 Brass P3 Male Hose Tail, 1"Hose x 1"MBSP 1 $25.00

P31212 E-11 Brass P3 Male Hose Tail, 1/2"Hose x 1/2"MBSP 2 $15.00




P3134 E-11 Brass P3 Male Hose Tail, 1"Hose x 3/4"MBSP 1 $15.00




P3341 E-11 Brass P3 Male Hose Tail, 3/4"Hose x 1"MBSP 1 $23.00










P71 E-11 Brass P7Hose Joiner, 1"ID Hose 1 $16.00

P712 E-11 Brass P7 Hose Joiner, 1/2"ID Hose 2 $9.00





PT252 A-12 1/2" Impact Wrench, TH Clutch SS Coated Hammer Housing 1 $537.50

PT262 A-12 3/4" Impact Wrench, TH Clutch SS Coated Hammer Housing 1 $886.00

PA12-0300 H-2 Unloader Check Valve 1 $67.00

PT-1030 G-1 30mm Concrete Vibrator, 30mm head dia, 4kg head weight 1 $790.00

PT-1050 G-1 50mm Concrete Vibrator, 50mm head dia, 6kg head weight 1 $925.00

RC2000/10 E-2 Air/Water Hose Reel, Spring Retractable, 10mm ID x 15m hose 1 $390.00



SA-1 I-1 Carbide Burr, 50mm long, 1/4"shank, 6mm head, 16mm flute 1 $33.50


SA-14 I-1 Carbide Burr, 50mm long, 1/4"shank, 4.7mm head, 16mm flute 1 $34.50


K-9

Price List



SA-1AC I-4 Carbide Burr, 50mm long, 1/4"shank, 6mm head, 19mm flute 1 $43.00

SA-1XL I-1 Carbide Burr, 163mm long, 1/4"shank, 6mm head, 12.7mm flute 1 $48.00



SA-3AC I-4 Carbide Burr, 63mm long, 1/4"shank, 9.5mm head, 19mm flute 1 $65.00

SA-3XL I-1 Carbide Burr, 171mm long, 1/4"shank, 9.5mm head, 19mm flute 1 $71.00

SA-4 I-1 Carbide Burr, 68mm long, 1/4"shank,11mm head, 25mm flute 1 $65.50



SA-5 I-1 Carbide Burr, 68mm long, 1/4"shank,12.7mm head,25mm flute 1 $73.00

SA-51 I-5 Carbide Burr, 50mm long, 1/8"shank,6.3mm head,12.7mm flute 1 $32.00

SA-5AC I-4 Carbide Burr, 68mm long, 1/4"shank,12.7mm head,25mm flute 1 $95.00

SA-5XL I-1 Carbide Burr, 177mm long, 1/4"shank,12.7mm head,25mm flute 1 $102.00

SA-6 I-1 Carbide Burr, 68mm long, 1/4"shank,16mm head,25mm flute 1 $91.00

SB-1 I-1 Carbide Burr, 50mm long, 1/4"shank,6mm head,16mm flute 1 $37.00


SB-14 I-1 Carbide Burr, 50mm long, 1/4"shank,4.7mm head,16mm flute 1 $38.00

SB-1AC I-5 Carbide Burr, 50mm long, 1/4"shank,6mm head,19mm flute 1 $47.50

SB-1XL I-1 Carbide Burr, 163mm long, 1/4"shank,6mm head,12.7mm flute 1 $55.50



SB-3AC I-5 Carbide Burr, 63mm long, 1/4"shank,9.5mm head,19mm flute 1 $71.50

SB-3XL I-1 Carbide Burr, 171mm long, 1/4"shank,9.5mm head,19mm flute 1 $78.00



SB-5AC I-5 Carbide Burr, 68mm long, 1/4"shank,12.7mm head,25mm flute 1 $104.50

SB-5XL I-1 Carbide Burr, 177mm long, 1/4"shank,12.7mm head,25mm flute 1 $107.00


SC-1 I-2 Carbide Burr, 50mm long, 1/4"shank,6mm head,16mm flute 1 $39.00


SC-14 I-2 Carbide Burr, 50mm long, 1/4"shank,4.7mm head,16mm flute 1 $49.00

SC-1AC I-5 Carbide Burr, 50mm long, 1/4"shank,6mm head,19mm flute 1 $55.50

SC-1XL I-2 Carbide Burr, 163mm long, 1/4"shank,6mm head, 25mm flute 1 $52.00



SC-3AC I-5 Carbide Burr, 63mm long, 1/4"shank,9.5mm head,19mm flute 1 $65.00

SC-3XL I-2 Carbide Burr, 171mm long, 1/4"shank,9.5mm head,19mm flute 1 $76.50

SC-4 I-2 Carbide Burr, 68mm long, 1/4"shank,11mm head, 25mm flute 1 $77.50




SC-5 I-2 Carbide Burr, 68mm long, 1/4"shank,12.7mm head, 25mm flute 1 $84.00

SC-51 I-5 Carbide Burr, 50mm long, 1/8"shank,6.3mm head,12.7mm flute 1 $33.00

SC-5AC I-5 Carbide Burr, 68mm long, 1/4"shank,12.7mm head, 25mm flute 1 $95.00

SC-5XL I-2Carbide Burr, 177mm long,1/4"shank,12.7mm head, 25mm flute

1 $117.50

SC-6 I-2 Carbide Burr, 68mm long, 1/4"shank,16mm head, 25mm flute 1 $104.00

SD-1 I-2 Carbide Burr, 50mm long, 1/4"shank,6mm head, 5mm flute 1 $37.00

SD-11 I-2 Carbide Burr, 50mm long, 1/4"shank,3mm head, 2mm flute 1 $38.50

SD-14 I-2 Carbide Burr, 50mm long, 1/4"shank,4.7mm head,4.5mm flute 1 $37.00

SD-1AC I-5 Carbide Burr, 50mm long, 1/4"shank,6mm head,5mm flute 1 $46.50

SD-1XL I-2 Carbide Burr, 157mm long, 1/4"shank,6.3mm head,5mm flute 1 $52.00

SD-2 I-2 Carbide Burr, 50mm long, 1/4"shank,8mm head,7mm flute 1 $38.50

SD-3 I-2 Carbide Burr, 52mm long, 1/4"shank,9.5mm head,8mm flute 1 $44.50

SD-3AC I-5 Carbide Burr, 52mm long, 1/4"shank,9.5mm head,8mm flute 1 $50.50


SD-4 I-2 Carbide Burr, 52mm long, 1/4"shank,11mm head,9.5mm flute 1 $50.50




SD-5AC I-5 Carbide Burr, 54mm long, 1/4"shank,12.7mm head,11mm flute 1 $76.50



SE-1 I-3 Carbide Burr, 50mm long, 1/4"shank,6mm head,10mm flute 1 $45.00

SE-1AC I-5 Carbide Burr, 50mm long, 1/4"shank,6mm head,10mm flute 1 $75.00

SE-1XL I-3 Carbide Burr, 163mm long, 1/4"shank,6.3mm head,10mm flute 1 $50.50

SE-3 I-3 Carbide Burr, 60mm long, 1/4"shank,9.5mm head,16mm flute 1 $54.00

SE-3AC I-5 Carbide Burr, 60mm long, 1/4"shank,9.5mm head,16mm flute 1 $70.00



SE-5 I-3 Carbide Burr, 66mm long, 1/4"shank,12.7mm head,22mm flute 1 $79.00

SE-51 I-5 Carbide Burr, 47mm long, 1/8"shank,6.3mm head,9.5mm flute 1 $33.00

SE-5AC I-5 Carbide Burr, 66mm long, 1/4"shank,12.7mm head,22mm flute 1 $86.50




SF-1 I-3 Carbide Burr, 50mm long, 1/4"shank,6mm head,19mm flute 1 $42.00

SF-1AC I-5 Carbide Burr, 50mm long, 1/4"shank,6mm head,19mm flute 1 $62.50


K-10

Price List




SF-1XL I-3 Carbide Burr, 163mm long, 1/4"shank,6mm head,13mm flute 1 $50.50

SF-3 I-3 Carbide Burr, 63mm long, 1/4"shank,9.5mm head,19mm flute 1 $50.50

SF-3AC I-5 Carbide Burr, 63mm long, 1/4"shank,9.5mm head,19mm flute 1 $68.50

SF-3XL I-3 Carbide Burr, 171mm long, 1/4"shank,9.5mm head,19mm flute 1 $72.50

SF-41 I-6 Carbide Burr, 38mm long, 1/8"shank,3mm head,6.3mm flute 1 $23.00



SF50-2900 H-1 ASME Safety Valve 1/2"BSP 965kPa 140psi 1 $63.00




SF-5AC I-5 Carbide Burr, 68mm long, 1/4"shank,12.7mm head,25mm flute 1 $96.50

SF-5XL I-3 Carbide Burr, 177mm long, 1/4"shank,12.7mm head,25mm flute 1 $101.50


SG-1 I-3 Carbide Burr, 50mm long, 1/4"shank,6mm head,19mm flute 1 $42.00

SG-1XL I-3 Carbide Burr, 163mm long, 1/4"shank,6mm head,13mm flute 1 $52.00

SG-3 I-3 Carbide Burr, 63mm long, 1/4"shank,9.5mm head,19mm flute 1 $52.00

SG-3XL I-3 Carbide Burr, 171mm long, 1/4"shank,9.5mm head,19mm flute 1 $70.50




SG-5XL I-3 Carbide Burr, 177mm long, 1/4"shank,12.7mm head,25mm flute 1 $101.50


SH-2 I-4 Carbide Burr, 63mm long, 1/4"shank,8mm head,19mm flute 1 $51.00

SH-2XL I-4 Carbide Burr, 171mm long, 1/4"shank,8mm head,19mm flute 1 $76.00


SH-5 I-4 Carbide Burr, 75mm long, 1/4"shank,12.7mm head,31mm flute 1 $110.50

SH-5XL I-4 Carbide Burr, 183mm long, 1/4"shank,12.7mm head,31mm flute 1 $152.50


SL-1 I-4 Carbide Burr, 50mm long, 1/4"shank,6mm head,16mm flute 1 $43.00

SL-1AC I-6 Carbide Burr, 50mm long, 1/4"shank,6mm head,16mm flute 1 $57.00

SL-1XL I-4 Carbide Burr, 168mm long, 1/4"shank,6mm head,16mm flute 1 $49.50

SL-2 I-4 Carbide Burr, 66mm long, 1/4"shank,8mm head,22mm flute 1 $55.00

SL-3 I-4 Carbide Burr, 71mm long, 1/4"shank,9.5mm head,27mm flute 1 $66.00

SL-3AC I-6 Carbide Burr, 71mm long, 1/4"shank,9.5mm head,27mm flute 1 $85.50

SL-3XL I-4 Carbide Burr, 179mm long, 1/4"shank,9.5mm head,27mm flute 1 $90.50

SL-4 I-4 Carbide Burr, 72mm long, 1/4"shank,12.7mm head,28mm flute 1 $82.50

SL-41 I-6 Carbide Burr, 38mm long, 1/8"shank,3mm head,9.5mm flute 1 $19.50


SL-4AC I-6 Carbide Burr, 72mm long, 1/4"shank,12.7mm head,28mm flute 1 $121.50

SL-4XL I-4 Carbide Burr, 180mm long, 1/4"shank,12.7mm head, 28mm flute 1 $111.00

SL-6 I-4 Carbide Burr, 76mm long, 1/4"shank,16mm head, 30mm flute 1 $150.00

SM-1 I-4 Carbide Burr, 50mm long, 1/4"shank,6mm head,12.7mm flute 1 $40.50

SM-2 I-4 Carbide Burr, 50mm long, 1/4"shank,6mm head,18mm flute 1 $43.00

SM-4 I-4 Carbide Burr, 60mm long, 1/4"shank,9.5mm head,16mm flute 1 $64.00

SM-41 I-6 Carbide Burr, 38mm long, 1/8"shank,3mm head,8.7mm flute 1 $19.50


SM-5 I-4 Carbide Burr, 66mm long, 1/4"shank,12.7mm head,22mm flute 1 $80.50

SM-51 I-6 Carbide Burr, 50mm long, 1/8"shank,6.3mm head,12.7mm flute 1 $33.00


SN-1 I-4 Carbide Burr, 50mm long, 1/4"shank,6mm head,8mm flute 1 $39.50

SN-2 I-4 Carbide Burr, 52mm long, 1/4"shank,9.5mm head,9.5mm flute 1 $57.56

SN-3 I-4 Carbide Burr, 56mm long, 1/4"shank,12.7mm head,12.7mm flute 1 $78.50

SN-41 I-6 Carbide Burr, 38mm long, 1/8"shank,3mm head 3mm flute 1 $18.00

SN-42 I-6 Carbide Burr, 38mm long, 1/8"shank,3mm head 5mm flute 1 $18.50

ST25-0900 H-1 ASME Safety Valve 1/4"BSP 860kPa 125psi 1 $25.00

ST25-2200C H-1 ASME Safety Valve 1/4"BSP 1090kPa 160psi 1 $25.00

TP-2L G-7 1/2" In-line Lubricator, Aluminium Body, 42ml oil capacity 1 $135.00

TP-3L G-7 3/4" In-line Lubricator, Aluminium Body, 111ml oil capacity 1 $155.00

TT1210 E-12 Thread Seal, Teflon Tape, 12mm x 10m roll 1 $1.20

US06 E-12 Uni Swivel, Aluminium, 1/4"MBSP x 1/4"FBSP 1 $135.00

US06SS E-12 Uni Swivel, Stainless Steel, 1/4"MBSP x 1/4"FBSP 1 $295.00




US25 E-12 Uni Swivel, Aluminium, 1"MBSP x 1"FBSP 1 $380.00

WD0812 E-12 Hose Clamp, Worm Drive, 8-14mm, 6 per pack 6 $14.50

WD1016 E-12 Hose Clamp, Worm Drive, 11-17mm, 6 per pack 6 $14.50

WD1220 E-12 Worm Drive Hose Clamp, 12-20mm, 6 per pack 6 $15.10


K-11


Notes

L-1

L-L



Notes

L-2

-L


L-3

Notes



P-1

Conversion TableTO CONVERT FROM TO MULTIPLY BY DIVIDE BY

LENGTH

millimetres (mm) microns (µm) 1000

millimetres (mm) inches (in) 25.4

inches (in) microns (µm) 25400

AREA

square centimetres (sq cm)

square inches (sq in) 0.155

square inches (sq in)square centimetres (sq cm)

6.4516

square inches (sq in) square feet (sq ft) 144

square feet (sq ft) square inches (sq in) 144

square feet (sq ft) square metres (sq m) 0.0929

VOLUmE

litres (l) cubic feet (ft³) 28.3168

cubic metres (m³) cubic feet (ft³) 35.3147

cubic metres (m³) cubic yard (yd³) 1.30795

cubic metres (m³) US gallon (usg) 264.172

cubic metres (m³) Imperial gallons (g) 219.969

cubic feet (ft³) litres (l) 28.3168

US gallons (usg) Imperial gallons (g) 0.83267

FLOW

litres per second (l/s) cubic feet per minute (cfm) 2.11888

litres per min (l/min) cubic feet per minute (cfm) 28.3168

cubic metres per minute (m³/min)

cubic feet per minute (cfm) 35.3147

cubic feet per minute (cfm)

litres per second (l/s) 0.47195


litres per min (l/min) 28.3168



35.3147

US gallons per minute (gpm)

litres per second (l/s) 0.0630902



0.00378541


cubic feet per minute (cfm) 0.13368


Imperial gallons per minute (gpm)

0.83267

mASS

kilograms (kg) pounds (lb) 2.20462

kilograms (kg) short (US) ton 0.00110321

kilograms (kg) metric ton (tonne) 0.001

tonne kilograms (kg) 1000

ounces (oz) pounds (lb) 16

ounces (oz) grams (g) 28.35

pounds (lb) kilograms (kg) 0.453592

pounds (lb) ounces (oz) 16

FORCE

Newton (N) kilopond (kp) 0.101972

Newton (N) pound force (lbf) 0.224809

PRESSURE

kiloPascal (kPa) Pascals (Pa) 1000

kiloPascal (kPa)pounds per square inch (psi)

6.894

TO CONVERT FROM TO MULTIPLY BY DIVIDE BY

PRESSURE

kiloPascal (kPa) Bar 100

kiloPascal (kPa)millimetres of mercury (mm Hg)

7.525

kiloPascal (kPa) metres of water (m H₂O) 0.102

kiloPascal (kPa) inches of water (in H₂O) 4.021

kiloPascal (kPa)pounds per square inch (psi)

0.145

kiloPascal (kPa)atmospheres (approx. at sea level)

0.0098692

kiloPascal (kPa)kilogram force/sq. centimetre (kgf/cm²)

0.0101972

kiloPascal (kPa) microns (vacuum) 7501.8755

kiloPascal (kPa) torr (vacuum) 0.1333

Barpounds per square inch (psi)

14.503

Bar kiloPascal (kPa) 100

Baratmospheres (approx. at sea level)

0.987

Bar metres of water (m H₂O) 10.211

Barmillimetres of mercury (mm Hg)

75.247

pounds per square inch (psi)

atmospheres (approx. at sea level)

0.068


inches of water (in H₂O) 27.27


kilograms per sq. centimetre (kg/cm²)

0.07


metres of water (m H₂O) 0.704


inches of mercury (in HG) 2.043


millimetres of mercury (mm Hg)

51.884


Bar 0.069


kiloPascal (kPa) 6.894

TORQUE

Newton metres (Nm)kilogram force.centimetre (kgf-cm)

10.1972

Newton metres (Nm) kilogram force.metre (kgf-m) 0.101972

Newton metres (Nm) foot pounds (ft-lbf) 0.737562

Newton metres (Nm) inch pounds (in-lbf) 8.8507

kg force-centimetre (kgf-cm)

Newton metres (Nm) 0.098

kg force-metre (kgf-m) Newton metres (Nm) 9.8067

POWER

Watts (W) horsepower (hp) 746

kilowatts (Kw) horsepower (hp) 0.746

BTU/hour Watts of refrigeration (W) 0.293071

ton of refrigeration (T)kiloWatts of refrigeration (kW)

3.51685

M-1

CONTENTS

Your Local Distributor

Reduce costs and improve productivity in industrial operations. Why air tools are the starter option.

Advantages of Air ToolsSAFE No sparks, no electric shocks

LONG LASTING Strong metal and composite construction

COMPACT Smaller than electric tools of equal power

DURABLE Do not burn out with overloading

RELIABLE Simple in operation

ERGONOMIC High power to weight ratio

CONVENIENT No electric lead regulations

www.compressedairtools.coJ.au

INDUSTRIAL QUALITY AIR TOOLS

A Alliance Industrial Air Tools A-1 – A-12

B Alliance Air Tool Accessories B-1 – B-9

C Alliance Abrasives & Cutting Tools C-1 – C-3

D Alliance Air Preparation Equipment D-1

E Alliance Air Hose & Fittings E-1 – E-12

F Alliance Display Stands F-1

G Alliance Construction Air Tools & Accessories G-1 – G-7

H Alliance Air Compressors & Accessories H-1 – H-2

I Chieftan Carbide Burrs I-1 – I-6

J Trelawny Surface Prep Tools & Accessories J-1 – J-5

K Price list K-1 – K-11

L Notes L-1 – L-3

M Conversion Table M-1

Documents

2019/20 - Compressed Air Tools · Alliance Industrial Air Tools A A-2 FULL SPARE PARTS & SERVICE BACK-UP PRODUCT NO. IMAGE PRODUCT DESCRIPTION BARCODE AL-1204 13mm Reversible Drill/Screwdriver-800rpm