2015 Bicknell Racing Products Catalog

www.bicknellracingproducts.com1

APPAREL

Baseball Cap APP 126P/NDESCRIPTION

Grey Toque APP 130P/NDESCRIPTION

5 3/4” X 9 1/2” BRP Decal APP 525P/NDESCRIPTION

Men’s Black / Green T-Shirt APP 270-SIZEP/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXLMen’s Grey / Green T-Shirt APP 275-SIZE

P/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXLMen’s Gray / Orange T-Shirt APP 285-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXL, XXXLMen’s Black / Orange T-Shirt APP 290-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXL, XXXL

Women’s Turquoise V-Neck APP 265-SIZEP/NDESCRIPTION

Available Sizes: L, XL, XXLWomen’s Pink T-Shirt APP 300-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXLWomen’s Pink Hoodie APP 200-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXLWomen’s Black Hoodie APP 305-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXL

Men’s Fall Jacket APP 90-SIZEP/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXLWomen’s Jacket APP 95-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXL

3’ X 8’ BRP Banner APP 537P/NDESCRIPTION

Men’s Black Star T-Shirt APP 190-SIZEP/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXLMen’s Black / Green Hoodie APP 280-SIZE

P/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXLMen’s Black / Orange Hoodie APP 295-SIZE

P/NDESCRIPTION

Available Sizes: S, M, L, XL, XXL, XXXLMen’s Golf Shirt APP 50-SIZE

P/NDESCRIPTION

Available Sizes: M, L, XL, XXL, XXXL

www.bicknellracingproducts.com

INDEX

2

DUROMETERS 152DZUS BUTTONS 162DZUS PLATES 162DZUS SPRINGS 162DZUS TOOL 154EELECTRICAL AND GAUGES 125-128ENGINE AND ACCESSORIES 109-111ENGINE DOWELS 110ENGINE MOUNTS AND PLATES 110ENGINE OIL LINES 112ENGINE STAND 111EXHAUST 147-149 ELBOWS & TURNOUTS 149HANGERS 148 MUFFLERS 148 PIPES 149 WRAP 149FEXPANSION TANK 129FAN SHROUDS 131FANS & SPACERS 129FASTENERS & ACCESSORIES 162-163 BUTTONS 162 CLECOS & PLIERS 154 DZUS TOOL 154 PLATES 162 RIVETS 162 SPRINGS 162FIBERGLASS PARTS 166FIRE SYSTEMS 156FITTINGS 102-108FLEX PLATES 120-122FORD 9 INCH REAR ENDS 45,46 GRAND NATIONAL 5 X 5 43,45 MINI 3/4 TON FLOATER 45 WIDE 5 45FOX SHOCKS 74,75FRONT CLIPS 173FUEL SYSTEM AND ACCESSORIES 141-146 CELLS 145-146 FILTERS 143 FUNNELS 155 JETS 141 JUGS 155 LOGS 142 POWER VALVES 141 PRESSURE REGULATOR 142 PUMPS 142 SHUTOFF VALVES 143GGAS PEDALS 173,178GASKETS 123,124GAUGES & PANELS 127,128GEARS (QUICK CHANGE) 41GEAR TOTE BOX 41GEAR LUBE 113,114GLOVES 157GOGGLES 155GUSSETS 162HHEADERS AND EXHAUST 147-149 COLLECTORS 149 WRAP 149HELMET RESTRAINTS 156HELMET FANS 157HELMET HOOKS 158HELMETS 158

AAFCO SHOCKS 79,80AIR DUCT HOSE 71AIR DUCTS 71AIR FILTERS 144AIR FILTER OIL 144ALUMINUM ROD ENDS 11ALTERNATORS 137,140ALUMINUM SHEETING 163ALUMINUM SPACERS 14,15ALUMINUM TAP TUBING 14AN FITTINGS 102-108APPAREL 1ARM RESTRAINTS 156AXLE DIRT MODIFIED FRONTS 20 FRONT AXLE BRACKETS 21 MICROSPRINT 175-177 MOD LITE 44,183 TQ-MIDGET 175-177 WIDE 5 REAR 44BBALANCE BAR 68BALANCE BAR ADJUSTER 70BALLAST MOUNTS 163BALLAST WEIGHT 163BALL JOINTS 18BALL JOINT SLEEVES 18BATTERIES 125BATTERY BOXES 125BATTERY CABLES 125BATTERY POSTS 125BEAD BREAKER 152BEAD LOCKS 97.98BELTS-ENGINE 132-140BELL HOUSING 120BELTS AND PULLEYS 132-140BERT TRANSMISSION 116-120BILSTEIN SHOCKS 76-79BIRDCAGES 27-30BIRDCAGE BEARINGS 27-29,177BODIES (MODIFIED) 166-169BODY SUPPORTS 167BOLT KITS 173BRAIDED HOSE 103BRAKES AND ACCESSORIES 56-71 ADJUSTERS 70 BALANCE BARS 68 BIAS PANEL 70 BLEEDERS 67 CALIPERS 56,57 CALIPER BRACKETS 26,62,63,71 CALIPER BRACKETS CHART 64 CLAMPON BRACKETS 63,71 DUCTS 71 FITTINGS 67 FLUID 65 HATS 60 LINE DEFLECTORS 63 LINES & CLAMPS 65,66 MASTER CYLINDERS 69,179 PAD SPACERS 57 PADS 58-60,179 PEDALS 66,70,178 PRESSURE GAUGE 70 PROPORTIONING VALVE 66 RESIDUAL VALVES 66 ROTOR ADAPTOR 26,48,63

ROTOR MOUNTS 26 ROTORS SHUTOFF VALVES 66 SLAVE CYLINDERS 68BREATHERS 113BRIDGE PARTS 40BUMPERS AND MOUNTS 172 CLIPS 172 DOOR MOUNTS 172 FRONT AND REAR BUMPERS 172 QUARTER PANEL MOUNTS 172 ROOF MOUNTS 172 SIDE BARS 172BUMP RUBBERS 82BUTTON TOOL 154CCALIPER BOLTS 57CAM AIR 153CARBURETORS 141 ADAPTORS 144 FITTINGS 142,143 GASKETS 124 JETS 141 POWER VALVES 141 SPACERS 143CASTER-CAMBER GAUGE 151CHASSIS AND COMPONENTS 164-173CHASSIS PARTS BREAKDOWN 170,171CLECOS & PLIERS 154CLEVISES 11CLOSED DRIVE 47CLUTCHES 122 FORK 121 PEDAL 70 SLAVE CYLINDER 68 THROWOUT BEARINGS 122COG BELTS AND PULLEYS 138COIL OVER KITS 86-90COIL OVER SPRINGS 91-93COIL SPRING BUCKETS 95COIL SPRING COVERS 83COIL SPRING SPACERS 95COM BEARINGS 11CONTROL ARM BUSHINGS 17,19CONTROL ARM MOUNTS 18CONTROL ARMS 17CRANK FLANGES 120CRASH POCKETS 170-171CRATE ENGINE 109CROSS SHAFTS 17CYLINDER HEADS 111CYLINDER LEAKDOWN GAUGES 111DDECAL 1DIAPER PINS 79,82,181DISTRIBUTORS & PARTS 126DMI QC REAR END 39DRAG LINK 12DRAIN PAN 41DRILLS & TAPS 14,154DRIVE FLANGES 50,54DRIVE SHAFT COVERS 32,121DRIVE SHAFT SAFETY HOOPS 37DRIVE SHAFTS 120DRIVE YOKES 120DRIVING SUITS 157DRY BRAKES 146DRY SUMP TANKS 112

HELMET SHIELDS 158HOOD PIN KITS 163HOODS (MODIFIED/SPORTSMAN) 166HOSE 102-104 BRAIDED 103 FIRE SLEEVE 103 PUSH ON 102 RADIATOR 131HUBS AND DRIVE FLANGES 48-55 LARGE BEARING 24,25,48-51 LATE MODEL IMPALA 54 LIVE AXLE 47,53 MICRO SPRINT 175-177 MIDGET 175-177 MINI 3/4 TON 45 MOD LITE 183 SIX PIN 26 WIDE 5 49-53IIGNITION SYSTEM 126IMPACT WRENCHES 154INTAKE MANIFOLDS 111INTEGRA SHOCKS 72,73INTERNATIONAL SPINDLE 26JJACK BOLTS 83JACKS-ALUMINUM 155JAM NUTS 11JET PLATE 141JETS 141KKART PARTS 178-182 AIR FILTERS AND ADAPTORS 181 AXLES 179 BRAKE PARTS 179 BRAKE PEDALS 178 CARB PARTS 180,181 CHAIN LUBE 180 CHAINS 180 CLAMP BRACKETS 181 CLUTCHES 180 ENGINE OIL 180 EXHAUST PARTS 181 FRONT HUBS 178 FUEL FILTERS 180 FUEL TANK 180 GAS PEDALS 178 GASKETS 180 MASTER CYLINDERS 179 MOTOR MOUNTS 181 MUFFLERS 181 REAR HUBS 179 ROTORS 179 SEATS 181 SPINDLES 178 SPROCKETS 180 STEERING WHEELS 181 TIE RODS 178 TIRES 182KING PINS 22-26,178KNEE GUARD 6LLARGE BEARING PARTS 24-29, 48-51LEAD BALLAST 163LEAF SPRINGS & PARTS 94LIVE REAR PARTS 47,53LOWERING BLOCKS 47,94LUBRICANTS AND FILTERS 112-114

61,176,177,179


INDEX

3

LUG NUT WRENCH 55,154LUG NUTS 55MMANDRELS 137-139MASTER CYLINDERS 69,179MICRO SPRINT 175-177MINI SPRINT 175-177MINISPOOLS 46MOD LITE 183,184MOTOR MOUNTS 110,181MSD ACCESSORIES 126MUD PLUGS 101MUDD OFF 155MUFFLERS 148,181NNECK BRACES 157NOMEX CLOTHING 157NORTHEAST MOD FT SUSPENSION 20-26NORTHEAST MOD RR SUSPENSION 27-37OEM SUSPENSION COMPONENTS 17-19OOIL SYSTEM DRY SUMP TANKS 112 OIL 114 OIL COOLERS 112 OIL FILTERS 112 OIL FILTER ADAPTORS 113 OIL PAN HEATER 112 OIL PUMP 113ORINGS 106OUTERWEAR PREFILTERS 144PPANEL FASTENERS 162PANHARD BAR 33PANHARD SLIDERS 21,47PANHARD MOUNTS 21,32,33,PEDALS 66,70PILOT BUSHING 121PIT AND SAFETY 155-159 PIT SOCKETS 55,154PITMAN ARMS 7PLASTIC (ROLLS & SHEETS) 163PLASTIC CLEANER 155PLUMBING AND FITTINGS 102-108POWER STEERING 8-10 BRACKETS 10 FILTERS 8 FITTINGS 7,8 FLUID 8 HOSES 8 PUMPS 8 RESERVOIRS 9PRE-FILTERS 144PRO SHOCKS 79-81PULLEYS 132-140PYROMETER 152QQC GEARS 41QC REAR END PARTS 41-47QC REARS 38,39QC THIRD LINK MOUNT 47QUICK RELEASES 4RRACEIVERS 155RACK & PINION 184RADIATORS AND COOLING 129-131 RADIATORS 130 RADIATOR HOSES & CLAMPS 131

61,176,177,183

22-26, 43,175

RADIATOR MOUNTS 173 RADIATOR NECKS 129,130RADIO RECEIVERS 155RADIUS ROD SLUGS 14RADIUS RODS AND ROD ENDS 11-15,31REDUCER BUSHINGS 14REAMERS 19REAR AXLE TUBES 42,43REAR AXLES 44,175-177REAR CLIP 173REAR END FILLER 41REAR ENDS AND ACCESSORIES 38-47RING & PINION 38,39RIVETS 16,162ROD END SPACERS 14,15ROD ENDS 9,10ROLLER CHANGING TOOL 154ROLL BAR PADDING 159ROOF MOUNTS 172ROTOR ADAPTORS 26,63ROTORS ROOFS-MODIFIED 166RUBBER FLOOR 34SSAFETY ACCESSORIES 155-159SAFETY WIRE & PLIERS 154SCALES 150SEATS AND ACCESSORIES 160,161 SEAT BELTS 156 SEAT COVERS 160,161 SEAT SUPPORTS 161SERPENTINE PULLEYS 132-137SETUP STANDS 173SHACKLE BOLTS & PLATES 94SHIFTER BALL 122SHIFTER EXTENSION 121SHOCKS AND ACCESSORIES 72-85 AFCO 80 BILSTEIN 76-79FOX 74-75 INTEGRA 72,73 PRO 79-81SHOCK COVERS 83SHOCK INFLATION UNIT 82SHOCK MOUNTS 83,85SHOCK OIL 82SHOCK SLIDERS 84,184SHOCK TOWERS 171SHOES 157SIX PIN PARTS 26SLAVE CYLINDER 68SOCKS (NOMEX) 157SPACERS 14,15SPARK PLUG WIRES 126SPARK PLUGS 126SPINDLES 8 BOLT 43 10 DEGREE 22,23,25 INTERNATIONAL WIDE 5 26 KART 178 LARGE BEARING 24,25 MICRO SPRINT 175 NUT WRENCHES 53SPOILERS 167SPRINGS AND ACCESSORIES 91-95 COIL OVER SPRINGS 91-93 CONVENTIONAL COILS 91 DZUS 162

MINI 31 MULTILEAF 94 PIGTAIL 91 STREET STOCK 91 TAKE-UP 94SPRING FLOATER 94SPRING RODS 31,32SPRING SEAT (REAR) 95SPRING SPACER 95SPRINT 174STABILIZER BAR PARTS 17STARTERS 121STARTERS AND DRIVETRAIN 115-122STAT O SEALS 107STEEL CLEVISES 11STEEL REDUCER BUSHINGS 14STEEL TAPER SPACERS 15STEEL TUBING 9,14STEERING AND QUICK RELEASES 4-10 ARMS 7,174 BOX MOUNTS 6 BOXES 6 COUPLERS 7 KNEE GUARDS 6 QUICK RELEASES 4 QUICKENERS 9 ROD ENDS (OVERSIZE) 9 SHAFT COLLARS 9 SHAFTS 9 SUPPORT BEARINGS 9 UNIVERSAL JOINTS 7 WHEEL CENTER PADS 5 WHEEL SPACERS 5 WHEELS 5STOP WATCHES 154STREET STOCK BUMPERS 16SURGE TANK 129SWAY ARMS 26SWITCHES & PANELS 128TTACHOMETERS 127TAP TUBING 14TAPE 16,163TEAROFFS 158TEMPERATURE GUN 152THERMOSTAT HOUSINGS 130THREADED SLUGS 14THROTTLE ROD KITS 141THROWOUT BEARINGS 122THRUSHAFTS 38,39TIE DOWNS 159TIE RODS 12TIE WRAPS 163TIRE GRINDER 153TIRE GRINDING DISCS 152TIRE GROOVER 153TIRE IMPROVER 153TIRE PRESSURE GAUGE 152TIRE SIPER 153TIRE TAPE 101,153TIRE VALVE STEMS 101TOE PLATES 152TOOLS, TIRE GAUGES AND SCALES 150-154TORQUE ARM SLIDERS 34,35TORQUE ARMS 37,177TORQUE TUBES 47TORSION ARMS 36,174,177TORSION BARS 36

TORSION BEARINGS 35TORSION BUSHINGS 35TORSION STOPS 35,177TQ MIDGETS 175TRAILING ARM BRACKETS 30TRANSMISSIONS 115-119TRANSMISSION FLUID 113TRANSPONDERS 155TUBES (STEEL & ALUMINUM) 42,43TUBING 14UU BOLTS 46,94,120UNIVERSAL JOINTS 7,120 DRIVELINE 120 STEERING 7UNDERWEAR 157UPPER CONTROL ARM MOUNTS 18UPPER CONTROL ARMS 17VV BELT PULLEYS 138-140VALVE STEMS 101VENT TANK 112WWARNING LIGHTS 128WATER OUTLETS 130WATER PUMPS 129WATER WETTER 131WEATHERTIGHT CONNECTORS 126WEDGE BOLTS 84WEIGHT JACKS 85,95WELD IN BUNGS (ALUMINUM) 108WELD ON SLUGS (STEEL) 14WHEELS AND ACCESSORIES 96-101 ADAPTORS (STOCK) 100 ADAPTORS (WIDE 5) 100 ALUMINUM 97 NUTS 55 SPACERS (ALUMINUM) 100,101 STEEL 96,99 STUDS 55 WRENCH 99 WIDE 5 22-26,49-54WINDOW NETS 156WINDOW SCREENS 172WING SLIDERS 177WINTERS QC REAR 38 COVER GASKETS 46, 124 GEARS 41 GEAR COVER 38 INSPECTION PLUGS 46 O RINGS (SIDE BELL) 38 POSI LOCK 38 RING & PINION 38 SIDE BELLS 38 SPOOLS 38 SPOOL SEALS 38 U-BOLTS 46,94,120 VENT TUBE KIT 39,46WINTERS TRANSMISSION 115WRENCHES 22,26,32,53YYOKES 120


STEERING QUICK RELEASES

Complete 5/8” weld on assembly (red)Complete 3/4” weld on assembly (red)Complete splined assembly Profile,Lee or Nields steering Box(red)Quick Release Hub only5/8” weld on shaft only3/4” weld on shaft onlySplined shaft only

BRP 191BRP 192BRP 193*BRP 194BRP 195BRP 196BRP 184*

*Includes BRP 184W and BOL 051502F

P/NDESCRIPTIONLightweight Hex Aluminum

Complete 5/8” weld on assembly (red)Complete 3/4” weld on assembly (red)Complete splined assembly Profile,Lee or Nields steering Box(red)5/8” weld on shaft only3/4” weld on shaft onlySplined shaft onlyQuick Release Hub only

BRP 186BRP 188BRP 190*BRP 180BRP 182BRP 184BRP 185*

P/NDESCRIPTIONStandard Hex Aluminum

Aluminum & Steel Rim Hex TypeComplete 5/8” assemblyComplete 3/4” assemblyComplete splined assembly fits Profile,Lee or Nields steering Box5/8“ weld on shaft only3/4” weld on shaft onlySplined shaft onlyQuick Release Hub Only

BRP 177SBRP 178S

BRP 173BRP 174BRP 175*BRP 176S

BRP 179BK*BRP 173BRP 174BRP 175*

BRP 176BK

DESCRIPTION RED ALUM P/N STEEL P/N

4

Complete 5/8” weld on assemblyComplete 3/4” weld on assembly Complete splined assembly Profile,Lee or Nields steering BoxSplined Shaft only5/8” weld on shaft only3/4” weld on shaft onlyQuick Release Hub only

BRP 167BRP 168BRP 169*BRP 163*BRP 164BRP 165BRP 166

P/NDESCRIPTIONAluminum Body - Steel Rim - Multi Spline - Rim Type

Complete 5/8” weld on assemblyComplete 3/4” weld on assembly Complete splined assembly Profile,Lee or Nields steering BoxQuick Release Hub only5/8” weld on shaft only3/4” weld on shaft onlySplined Shaft only

BRP 2127BRP 2128BRP 2129*BRP 2121

RED P/NDESCRIPTIONAluminum Body - Aluminum Rim - Multi Spline - Rim Type

Complete 5/8” weld on assemblyComplete 3/4” weld on assembly Quick Release Hub only5/8” weld on shaft only3/4” weld on shaft only

BRP 2137BRP 2138BRP 2131BRP 2133BRP 2134

P/NDESCRIPTIONLightweight Aluminum - Multi Spline - Pin Type

Complete 5/8” weld on assemblyComplete 3/4” weld on assembly Complete splined assembly Profile,Lee or Nields steering BoxQuick Release Hub onlySplined Shaft only5/8” weld on shaft only3/4” weld on shaft only

BRP 160BRP 161BRP 162*BRP 159

RED P/NDESCRIPTION

Aluminum Body - Aluminum Rim - Multi Spline - Push Lock Style

STEERING & QUICK RELEASES



BLACK P/NBRP 160BKBRP 161BKBRP 162BK*BRP 159BK




Did You Know...You don’t have to pull the ringto put this on. Just push it and

it snaps into place!

BLACK ALUM P/NBRP 177BRP 178

BRP 179*BRP 173BRP 174BRP 175*BRP 176

BRP 160BKBRP 159

BRP 191

BRP 186

BRP 177 BRP 177S

BRP 167

BRP 2127

BRP 2137

BLACK P/N

BRP 164BRP 165BRP 163*

BRP 2127BKBRP 2128BKBRP 2129BK*BRP 2121BK

BRP 162-1*BRP 160-1BRP 161-1



5

STEERING WHEELS

13” Flat Aluminum Wheel (with Knuckle Grips)13“ Dish Aluminum Wheel (3” Dish with Knuckle Grips) 15” Flat Aluminum Wheel (with Knuckle Grips)15“ Dish Aluminum Wheel (3” Dish with Knuckle Grips)17” Flat Aluminum Wheel (with Knuckle Grips)17” Dish Aluminum Wheel (3” Dish with Knuckle Grips)

SWE 601-70131SWE 601-70132SWE 601-70151SWE 601-70152SWE 601-70171SWE 601-70172

P/NDESCRIPTION

Sweet Aluminum Steering Wheels

15” Dish Aluminum Wheel17“ Dish Aluminum Wheel

REB 270-8645REB 270-8655

P/NDESCRIPTION

Rebco Aluminum Steering Wheels

Did You Know...Aluminum Kart Wheels weighless than 1 pound, while thesteel Kart Wheel weighs 2.5

pounds.

Longacre Steel Steering Wheels

15” Dish Steel Wheel LON 56841P/NDESCRIPTION

Black 6” Round Pad

Black Sprint Style Pad

KIR 00001

KIR 00021

P/NDESCRIPTION

STEERING WHEEL PADS

KART STEERING WHEELS

12” Economy Steel Kart Wheel with Rubber Grip12” Aluminum Kart Wheel (no grip)14” Aluminum Kart Wheel (no grip)Top Gun Aluminum Kart Wheel (no grip)

BRP 4364BRP 4363BRP 4601BRP 4362

P/NDESCRIPTION

STEERING WHEEL SPACERS

1/2” Thick Aluminum Spacer1” Thick Aluminum Spacer1 1/2” Thick Aluminum Spacer2” Thick Aluminum Spacer

BRP 189-50BKBRP 189-100BKBRP 189-150BKBRP 189-200BK

BLACK P/NDESCRIPTION

*All spacers include bolts*

BRP 4364 has small bolt pattern only, BRP 4362,4364, and 4601 have big and small bolt pattern.

BRP 189-50BRP 189-100BRP 189-150BRP 189-200

RED P/N

SWE 601-70131

REB 270-8645

LON 56841

BRP 189-100

BRP 4362BRP 4364

KIR 00003 KIR 00021


MODIFIED STEERING BOXES

Profile Aluminum Center Steering Box-190 Spool Valve (12:1 Ratio)Profile Steel Center Steering Box Light Spool Valve (14:1 Ratio)GME Aluminum Center Steering Box (9:1 Ratio)GME Aluminum Center Steering Box (12:1 Ratio)

PRF PROPRF BOX-190GME GA951850NHGME GA125183NF

P/NDESCRIPTION

6


STEERING BOX MOUNTS

Center Steering Hanger Assembly for Standard ChassisCenter Steering Hanger Assembly for Driver Back ChassisReplacement 4” standard StrapReplacement 6” Driver Back Strap

BRP 274BRP 274-6BRP 274-2

RED P/NDESCRIPTION BLACK P/NBRP 274BKBRP 274-6BKBRP 274-2BKBRP 274-3

Right Side Mounting Plate for KSE Steering Box / GME 2 1/4” I.D.Right Side Mounting Plate for Profile/Nields Steering Box - 2” I.D.Upper Steel Weld On Chassis TabLower Steel Weld On Chassis Tab

BRP 9044BRP 9045MFG CHA216MFG CHA215

P/NDESCRIPTION

3” Bolt Spacing Side Steering Box Mount (TEO STYLE)2 1/2” Bolt Spacing Side Steering Box Mount (used BRP Cars)3” Bolt Spacing Non Binding Steering Box Mount (TEO STYLE)2 1/2” Bolt Spacing Non Binding Steering Box Mount (used on BRP cars)

BRP 273BRP 215

RED P/NDESCRIPTION BLACK P/NBRP 273BKBRP 215BKBRP 9303BRP 9298

Did You Know...Steel Boxes weigh 34.3 pounds,

aluminum boxes weigh 29.6 pounds.

CENTER STEER KNEE GUARDS

Padded Center Steer Knee Guard BRP 9046P/NDESCRIPTION

AFC 37122with O-Ring

AFC 37124without O-Ring

Seal KitRight Side Tube for Steering BoxAluminum Box Fittings -both fittings (comes with o-ring) Replacement O-Ring for XRP 980006Steel Box Pressure Fitting (commonly red) Small 5/8” -18 Flare typeSteel Box Return Fitting (commonly blue) Large 11/16” - 16 Flare typeGM Power Steering Fitting ‘80 and up M16 X 1.5 with O-RingGM Power Steering Fitting ’80 and up M18 X 1.5 with O-Ring

P/NDESCRIPTIONPRF KITBRP PROFILEXRP 980006NIA 112AFC 37124AFC 37125AFC 37122AFC 37123

Box mount without Right Side Tube

Side Steering Box Mount

Center Steering Box Mounts

BRP 9046

BRP 9045

BRP 215

BRP 274

Did You Know...BRP 9046 will fit any steering box that

has a long right side tube!It is covered in high density padding to stop

your knees from hitting the steering boxon rough tracks or impacts.

BRP 274-6BK

PRF PRO

PRF BOX190

GME 951850NH

Steering Boxes

Profile Rebuild Parts

BRP 9303 BRP 9298



7

UNIVERSAL JOINTS AND COUPLERS

SmoothStiletto Spline (.620)SmoothSweet Spline / Sweet RackChevy Power / Sweet Steering BoxChevy Manual / Pinto Power / HowePinto ManualVega Spline (.600)New Chevy Power / AppletonChevy ColumnDouble DSmooth

SWE 401-50606SWE 401-50607SWE 401-50608SWE 401-50610SWE 401-50611SWE 401-50612SWE 401-50613SWE 401-50614SWE 401-50615SWE 401-50618SWE 401-50619SWE 401-50808

U-JOINT P/NDESCRIPTIONAPPLICATION3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth3/4” Smooth5/8” Smooth

SPLINE SPLINE

3/4” Smooth5/8” 36 Spline5/8” Smooth3/4” 48 Spline13/16” 36 Spline3/4” 36 Spline9/16” 26 Spline5/8” 36 Spline3/4” 30 Spline1” 48 Spline3/4” Double D5/8” Smooth

COUPLER P/N

SWE 301-30100SWE 301-30110SWE 301-30120SWE 301-30130SWE 301-30140SWE 301-30150

U-JOINT

COUPLER

ALUMINUM PITMAN ARMS

Lightweight with pocketing- holes at 11,12, & 13” (for 12:1 & 14:1 boxes)Heavy Duty with pocketing- holes at 11,12, & 13” (for 12:1 & 14:1 boxes)Lightweight with no pocketing- holes at 11,12, & 13” (for 12:1 & 14:1 boxes)Heavy Duty with pocketing- holes at 9 & 10” (for GME 9:1 boxes)

BRP 220BRP 221BRP 220-1BRP 227

RED P/NDESCRIPTION BLACK P/NBRP 220BKBRP 221BKBRP 220-1BKBRP 227BK

ALUMINUM STEERING ARMS

FIG 4

Ford lower Steering Arm for right front BRP SpindleFord lower Steering Arm for right front BRP Spindle- no pocketingFord lower steering Arm for right front - front mount caliperInternational lower steering arm right frontFord lower Steering Arm for left front BRP SpindleFord lower Steering Arm for left front BRP Spindle- no pocketingFord lower Steering Arm for left front- front mount caliperSprint Car Style Single Steering ArmMaxim Style Single Steering ArmFord Left Front Combo Arm with Ackerman Adjustment (top mount caliper)Ford Right Front Combo Arm with Increased Ackerman (top mount caliper)Ford Left Front Combo Arm with Ackerman Adjustment (front mount caliper)Ford Right Front Combo Arm With Increased Ackerman (front mount caliper)

RED P/NDESCRIPTIONBRP 211BRP 211SBRP 213BRP 212BRP 209BRP 209SBRP 210

BRP 9087BRP 9140

FIG1111222463535

BLACK P/NBRP 211BKBRP 211SBKBRP 213BK

BRP 209BKBRP 209SBKBRP 210BK

BRP 9087BKBRP 9140BKBRP 9254BKBRP 9255BK

PLAIN P/N

BRP 206BRP 204

BRP 9087FIG 3

BRP 9087FIG 3

BRP 9087B

BRP 9087C

BOL 104001C

BRP 211 BRP 209FIG 1 FIG 2

GM POWER STEERING BOX FITTINGS

Small 16mm X 1.50 O-Ring Style to AN6Large 18mm X 1.50 O-Ring Style to AN6

AFC 37122AFC 37123

P/NDESCRIPTIONWITH O-RING

WITH FLARE

GM Power Steering Fittings - 80’s & up

Small 5/8” X 18 TPI Flare StyleLarge 11/16” X 16 TPI Flare Style

AFC 37124AFC 37125

P/NDESCRIPTIONGM Power Steering Fittings - up to ‘79

BRP 206

FIG 5BRP 9140

FIG 6BRP 204

Did You Know...Use BRP 755 Tie Rod spacer with aluminum

steering arms.Use RR 47 1/2” Tie Rod when using both BRP 9087

and BRP 9140. Use RR 48 when using BRP 9087 ORBRP 9140.


POWER STEERING PUMPS

8

STEERING & QUICK RELEASESDid You Know...

Aluminum Power Steering Pumps weigh 3.15 poundsand operate at 1500 PSI, while a cast iron pump

weighs 4.30 pounds and operates at1200 PSI.

BRP 580

BRP 581

BRP 579-2

BRP 579 PUMP

BRP 579-1

BRP 5026

**IT IS HIGHLY RECOMMENDED THAT A FILTER BE USEDON THE INLET SIDE OF THE PUMP**

DESCRIPTION

REPLACEMENT PARTS

AN 9 O-ring to AN 10 (commonly used on return side of pump)AN 9 O-ring to 3/8” NPT Female (used on return side of pump)Rear Pump Cover O-ringOutlet Pressure Fitting (threads into pump body)AN 6 Outlet Fitting (threads into BRP 579-1)Pressure Relief ValveAN 6 Pressure Outlet Fitting (replaces BRP 579-1 & 579-2)Pump Seal O-Ring Repair Kit

BRP 5026BRP 5027NIA 138BRP 579-1BRP 579-2BRP 579-3AFC 37130BRP 579-7

P/N

AFC 37130 BRP 5026 BRP 5027

Optional 1 pieceAFC 37130

Power Steering Pump OnlyPower Steering Pump with 6” V Pulley (1/2” Belt)Power Steering Pump with 6” V Pulley (3/8” Belt)Power Steering Pump with 4 1/4” Serpentine PulleyAluminum Power Steering Pump Only (no pulley)Aluminum Power Steering Pump with 4 1/4” Serpentine PulleyAluminum Power Steering Pump with 6” V PulleyPower Steering Pump with 7MM PulleyAluminum Power Steering Pump with 7MM Pulley

BRP 579BRP 580BRP 580-1BRP 581TUR T40STUR 581TUR 580BRP 9288TUR 9288

P/NDESCRIPTIONN/ABRP 996BRP 996-1BRP 951N/ABRP 951BRP 996BRP 9272BRP 9272

P/N

BRP 9288

POWER STEERING HOSES AND FILTERSPower Steering Hoses

Power Steering Filter

Power Steering Filter AssemblyReplacement Stainless Steel Filter Only

BRP 585AFC 84022

P/NDESCRIPTION

Power Steering Fluid

Sweet Power Steering Fluid (1 quart) SWE 301-30090P/NDESCRIPTION

Did You Know...Sweet power steering fluid is a

full synthetic fluid, which reducesfoaming.

46” Power Steering Pressure Hose for Profile Steel Box (AN 6 ends)has 1 straight AN6 fitting and 1 45° AN6 fitting75“ Power Steering Pressure Hose (AN 6 ends)has 1 straight AN6 fitting and 1 45° AN6 fitting52” Power Steering Pressure Hose for Nields/Profile Aluminum boxAN6 ends) has 1 straight AN6 fitting and 1 45° AN6 fittingAN 10 Power Steering Return Hose and Fitting KitAN 6 Bulk High Pressure Hose (sold per foot)Straight AN6 High Pressure screw on fitting for XRP 510006 hose90 degree AN6 High Pressure screw on fitting for XRP 510006 hose

BRP 577

BRP 578

BRP 578-1BRP 582XRP 510006XRP 500006XRP 509006

P/NDESCRIPTION

BRP 582 Includes:

1 - KBP 2251- XRP 2312101- XRP 2390101- XRP 2300061- XRP 239006

1.5 ft- XRP 3400064 ft- XRP 340010



9

POWER STEERING RESERVOIRS

FIG 1

FIG 2

FIG 3

FIG 4

FIG 5

Aluminum round tank with billet cap (no mount)Mounting bracket for round tank to mount on horizontal tubingAluminum round tank with flat mounting bracket and billet capReplacement billet cap for BRP 563 & BRP 563BReplacement O-Ring for BRP 563F billet capMounting plate for BRP 563B (common on DIRT Modifieds)Old Style Twist CapCockpit Mounted Power Steering Tank

BRP 563BRP 564BRP 563BBRP 563FNIA 216BRP 562MAFC 37151BRP 9372

P/NDESCRIPTIONFIG1234-5-6

Did You Know...This has a billet end and cap with an o-ring.

No more wornout stamped caps and ends- This onewill be the only one you will buy!

STEERING QUICKENERS

STEERING SHAFT TUBING AND MOUNTS

STEERING ROD ENDS AND SUPPORT BEARINGS

.007” Oversized Rod Ends

SteelSteel Jam NutAluminum Jam Nut

AFC 10400BRP 788BRP 772

P/NDESCRIPTION

.757” Bearing AFC 30321P/NDESCRIPTION

rod end will slide over 3/4” shaftFirewall/MidplateSupport Bearing

11” Long - Multi Slot Steering Shaft Mount3/4” X .120“ wall DOM steering shaft 18” Long3/4” X .120” wall DOM steering shaft 36” Long3/4” X .120” wall DOM steering shaft 48” Long3/4” X .120” wall DOM steering shaft 72” LongWeld on .760” ID X 2 1/2” long shaft coupler for 3/4” tubing

BRP 5108BRP 197BRP 198BRP 199BRP 199-1BRP 9151

P/NDESCRIPTION12 GAUGE STEEL

1.5:1 Ratio2:1 Ratio

HOW 5225HOW 522B2

P/NDESCRIPTION

Did You Know...Both sides of the steering quickener

are 3/4” X 36 Spline.

Did You Know...These aluminum collars mount on thesteering shaft with set screws to keep

the shaft from sliding.Also, file a small flat on the steering shaft

so it doesn’t gall the shaft!

STEERING SHAFT COLLARS

5/8” Shaft Collar3/4” Shaft Collar

BRP 181ABRP 181-1A

P/NDESCRIPTION

Did You Know...Steering shaft tubing is available in different lengths.

You can cut the shaft to desired lengthto make a custom steering shaft!

SEE CHART BELOW FOR LENGTHS

Did You Know...ATTN RACERS:

for 3/4” shaft- no hassles,no sanding!

BRP 9151BRP 5108

FIG 6



Big Block Chevrolet cylinder head mount power steering pump bracket kitBig Block Chevrolet head bracket onlySpacer between bracket and cylinder head

BRP 7154BRP 7152BRP 7150

RED P/NDESCRIPTION BLACK P/NBRP 7154BKBRP 7152BKBRP 7150BK

POWER STEERING BRACKETSBig Block Chevrolet - Head Mount

Small Block Chevrolet - Head Mount

Use BRP 1631, 1633, 1633-1 or 1634 to adapt power steering pump to this bracket.

Small Block Ford V Pulley - Head Mount

Small Block Ford V-Pulley power steering pump bracket kitSmall Block Ford V-Pulley bracket onlySpacer from bracket and cylinder head (4.885” long)

BRP 936BRP 935BRP 934

RED P/NDESCRIPTION BLACK P/N

Small Block Ford Serpentine Head mount power steering bracket kitSmall Block Ford Serpentine Mount onlySpacer from bracket and cylinder head (.850” O.D. X 2 1/2”L - 7/16” hole)


RED P/NDESCRIPTIONBRP 1421BK

1/8” Thick BB/SB Wet Sump- Block Mount Power Steering Spacer1/4” Thick BB/SB Wet Sump- Block Mount Power Steering Spacer3/8” Thick BB/SB Wet Sump- Block Mount Power Steering Spacer

BRP 270BRP 270-1BRP 270-2

RED P/NDESCRIPTION BLACK P/NBRP 270BKBRP 270-1BKBRP 270-2BK

Small Block Chevrolet Block Mount

Small Block Ford Serpentine Pulley - Head Mount

1/8” Thick power steering pump bracket adaptor or spacer3/8” Thick power steering pump bracket adaptor or spacer1/2” Thick power steering pump bracket adaptor or spacer5/8” Thick power steering pump bracket adaptor or spacer

BRP 1631BRP 1633BRP 1633-1BRP 1634


Power Steering Block Mount Bracket Spacers

Big Block Chevrolet Block mount power steering pump bracket BRP 271RED P/NDESCRIPTION BLACK P/N

BRP 271BK

Small Block Chevrolet power steering bracket kitReplacement Square Nut

BRP 268RED P/NDESCRIPTION BLACK P/N

BRP 268BK

Small Block Chevrolet cylinder head power steering pump bracket kitSmall BlockChevrolet head bracket onlyReplacement Nut Retainer PlateReplacement Square NutSpacer Between bracket and cylinder head (.380” thick X 3/8” hole)3/16” Long Spacer - 2 required

BRP 277BRP 275

RED P/NDESCRIPTION BLACK P/NBRP 277BKBRP 275BK

BRP 275-1BOL 057CBRP 277SBRP 275-2

Small Block Chevrolet Head Mount - Electric Water Pump

Small Block Chevrolet head mount power steering bracketRED P/NDESCRIPTION BLACK P/N

BRP 9292

Big Block Chevrolet - Block Mount

Power Steering Pump Spacers

BOL 057C


RADIUS RODS & ROD ENDS

11

STEEL ROD ENDS

Female- Zinc Plated

Good One Piece - Commercial Good One Piece - Commercial Best One Piece - Moly Good Two Piece - Precision Best Two Piece - Aircraft

Zinc Plated 4130 Moly Black Oxided 4130 Moly Zinc PlatedZinc Plated

ROD END SPECS

BORE SHANK TYPE

3/16”3/16”1/4”1/4”1/4”5/16”5/16”5/16”3/8”3/8”7/16”7/16”7/16”1/2”1/2”1/2”5/8”5/8”5/8”3/4”3/4”

3/16”F3/16”F1/4”F1/4”F1/4”F5/16”F5/16”F3/8”F3/8”F3/8”F7/16”F7/16”F1/2”F1/2”F1/2”F5/8”F5/8”F5/8”F3/4”F3/4”F3/4”F

MaleFemale

MaleFemale

Stud/Fem.Male

FemaleMaleMale

FemaleMale

FemaleMaleMale

FemaleMaleMale

FemaleMaleMale

Female

COMMERCIAL GRADEZINC 1 PIECE

LH THREAD LH THREAD LH THREAD LH THREADRH THREAD RH THREAD RH THREAD RH THREAD

MOLY 1 PIECEBLACK OXIDE

PRECISION GRADEZINC 2 PIECE

AIRCRAFT GRADE4130 ZINC PLATED

BRE 1031RBRE 1032RBRE 1041RBRE 1042RBRE 1042RSBRE 1051RBRE 1052R

BRE 1061RBRE 1062RBRE 1071RBRE 1072R

BRE 1081RBRE 1082R

BRE 1101RBRE 1102R

BRE 1121RBRE 1122R

BRE 1031LBRE 1032LBRE 1041LBRE 1042LBRE 1042LSBRE 1051LBRE 1052L

BRE 1061LBRE 1062LBRE 1071LBRE 1072L

BRE 1081LBRE 1082L

BRE 1101LBRE 1102L

BRE 1121LBRE 1122L

BRE 8081R

BRE 5081RBRE 5101R

BRE 8081L

BRE 5081LBRE 5101L BRE 3101R*

BRE 3102R

BRE 3121R*

BRE 3101L*BRE 3102L

BRE 3121L*

BRE 4061RBRE 2061R

BRE 2071R

BRE 4081RBRE 2081RBRE 2082RBRE 4101RBRE 2101R

BRE 4121RBRE 2121R

BRE 4061LBRE 2061L

BRE 2071L

BRE 4081LBRE 2081LBRE 2082LBRE 4101LBRE 2101L

BRE 4121LBRE 2121L

ALUMINUM ROD ENDS

1/2”1/2”5/8”3/4”

BRE 6081LBRE 7101LBRE 6101LBRE 6121L

LH THREADRH THREADBOREBRE 6081RBRE 7101RBRE 6101RBRE 6121R

SHANK1/2” FINE THREAD5/8” FINE THREAD5/8” FINE THREAD3/4” FINE THREAD

STEEL COM BEARINGS

1/2” I.D. COM Bearing5/8” I.D. COM Bearing3/4” I.D. COM Bearing1” I.D. COM Bearing

BRE COM8BRE COM10BRE COM12BRE COM16

P/NDESCRIPTION

5/8”F RH Thread, 3/8” hole with 3/8” wide slot5/8”F LH Thread, 3/8” Hole with 3/8” wide slot

BRP 690BRP 691

P/NDESCRIPTION

STEEL CLEVIS

JAM NUTS

3/16” F1/4”F5/16”F3/8”F7/16”F1/2”F5/8”F3/4”F

BRP 775BRP 777BRP 779BRP 781BRP 783BRP 785BRP 787BRP 789

RH THREADSIZEBRP 774BRP 776BRP 778BRP 780BRP 782BRP 784BRP 786BRP 788

THICKNESS7/32”7/32”1/4”1/4”1/4”5/16”3/8”7/16”

STEELLH THREAD

ALUMINUMRH THREAD LH THREAD

BRP 782ABRP 784ABRP 770BRP 772

BRP 785ABRP 771BRP 773

*Add T for Teflon


RADIUS RODS & TIE RODS

12

RADIUS RODS & ROD ENDSDid You Know...All Lengths under 36” are

anodized red or black, over 36” arePolished.

4”6”6 1/2”7”8”8 1/2”9”10”10 1/2”11”11 1/2”12”12 1/2”13”13 1/2”14”14 1/2”15” (Rear Panhard Bar) 15 1/2”16”16 1/2”17”17 1/2”18”18 1/2”19”19 1/2”20 1/2”21” (Front Panhard Bar)21 1/2”22”22 1/2”23”23 1/2“24”24 1/2”25” (Front Radius Rods)25 1/2”26”26 1/2”27”27 1/2”28”28 1/2“29”29 1/2”

BRP 1060BRP 1065BRP 1070BRP 1080BRP 1085BRP 1090BRP 1100BRP 1105BRP 1110BRP 1115BRP 1120BRP 1125BRP 1130BRP 1135BRP 1140BRP 1145BRP 1150BRP 1155BRP 1160BRP 1165BRP 1170BRP 1175BRP 1180BRP 1185BRP 1190BRP 1195BRP 1205BRP 1210BRP 1215BRP 1220BRP 1225BRP 1230BRP 1235BRP 1240BRP 1245BRP 1250BRP 1255BRP 1260BRP 1265BRP 1270BRP 1275BRP 1280BRP 1285BRP 1290BRP 1295

RED P/NLENGTH BLACK P/NBRP 1040BK

BRP 1065BK

BRP 1090BK

BRP 1115BK

BRP 1130BK

BRP 1140BKBRP 1145BKBRP 1150BKBRP 1155BKBRP 1160BKBRP 1165BKBRP 1170BK

BRP 1195BK

BRP 1210BK

BRP 1220BK

BRP 1245BKBRP 1250BK

1” O.D. Aluminum Radius RodX 5/8”F threads

15”17”17 1/2“18”18 1/2”19”19 1/2”20”20 1/2”21”21 1/2”22”22 1/2”24”24 1/2”25” (HD Front Radius Rods)25 1/2”26”26 1/2”27”27 1/2” (Left Rear Radius Rod)28”28 1/2”29”

44“45”45 1/2”46”46 1/2”47”47 1/2” (Tie Rod - Bert Spindles)48”48 1/2” (Tie Rod - BRP spindles)50“62”63”64”64“ Bent (drag link standard car)65”66”66“ Bent (drag link driver back)6767 Bent68”68 Bent68 1/2”

BRP RR15BRP RR17BRP RR171/2BRP RR18BRP RR181/2BRP RR19BRP RR191/2BRP RR20BRP RR201/2BRP RR21BRP RR211/2BRP RR22BRP RR221/2BRP RR24BRP RR241/2BRP RR25BRP RR251/2BRP RR26BRP RR261/2BRP RR27BRP RR271/2BRP RR28BRP RR281/2BRP RR29

RED P/NLENGTH BLACK P/N

BRP 19BK

BRP RR21BK

BRP RR25BKBRP RR251/2BK

BRP RR27BKBRP RR271/2BKBRP RR28BKBRP RR 281/2BKBRP RR29

LENGTH PLAIN P/NBRP RR44BRP RR45BRP RR451/2BRP RR46BRP RR461/2BRP RR47BRP RR471/2BRP RR48BRP RR481/2BRP RR50BRP RR62BRP RR63BRP RR64BRP RR64BBRP RR65BRP RR66BRP RR66BBRP RR67BRP RR 67BBRP RR68BRP RR68BBRP RR681/2

1 1/4” O.D. Aluminum Radius RodX 5/8”F threads

Radius Rod Wrench For 1 1/4” RodsRadius Rod Setting Tool

BRP 9371BRP 9362

P/NDESCRIPTION

6’ and 8’ Lengths of Material are also availableto make your own radius rods. See page 14 for details.

BRP 9371

BRP 9362

BRP 1090

BRP RR18



13

1” O.D. Aluminum Radius Rod 3/4”F threads

6”8”9”10”11”12”13“14”15”16”17”18”18 1/2”19”20”21”22”23”23 3/4“24”24 3/4”26 1/4”27”27 3/4“28”30”32”34”34 1/2”36”

BRP 13060BRP 13080BRP 13090BRP 13100BRP 13110BRP 13120BRP 13130BRP 13140BRP 13150BRP 13160BRP 13170BRP 13180BRP 13185BRP 13190BRP 13200BRP 13210BRP 13220BRP 13230BRP 13237BRP 13240BRP 13247BRP 13262BRP 13270BRP 13277BRP 13280BRP 13300BRP 13320BRP 13340BRP 13345BRP 13360

RED P/NLENGTHBRP 13060BKBLACK P/N

ECONOMY RADIUS RODS**(AVAILABLE IN PLAIN ONLY)**

8”8 1/2”9”14”17”22”24”25 3/4”26 3/4”

BRP 75080BRP 75085BRP 75090BRP 75140BRP 75170BRP 75220BRP 75240BRP 75257BRP 75267

P/NLENGTH

14 1/2”15“21”25”

BRP 1000-145BRP 1000-150BRP 1000-210BRP 1000-250

P/NLENGTH1” O.D. Aluminum X 5/8”F Threads

1 1/4” O.D. Aluminum X 5/8”F Threads

25”27”27 1/2”

BRP R250BRP R270BRP R275

P/NLENGTH

4130 Chrome Moly SteelUltra Light Radius Rods

22” 1“ O.D. with 1/2” fine threads25” 1“ O.D. with 1/2” Fine Threads21“ (Front Panhard Bar)21 1/2”25” (Front Radius Rods)25 1/2“27 1/2” (Left Rear Radius Rod)28”29”40”46 1/2“47 1/2” (Tie Rod for Bert Spindles)48 1/2” ( Tie Rod for BRP Spindles)49 1/2“64”64” Bent (Drag Link - Standard Car)66“66” Bent (Drag Link - Driver Back Car)

BRP 1220S-1/2BRP 1250S-1/2BRP RR21SBRP RR21 1/2SBRP RR25SBRP RR25 1/2SBRP RR271/2SBRP RR28SBRP RR29SBRP RR40SBRP RR46 1/2SBRP RR47 1/2SBRP RR48 1/2SBRP RR49 1/2SBRP RR64BRP RR64BSBRP RR66BRP RR66BS

BLACK P/NLENGTH

BRP RR25SCBRP RR27 1/2SC

BRP RR48 1/2SC

BRP RR64BSC

CHROME P/N

Swedged Aluminum Radius Rods

11 1/2”21”25”

BRP 1150SWBRP 1210SWBRP 1250SW

P/NLENGTH

Did You Know...Economy Radius Rods are

not anodized and do not have tapersor flats on them.

7/8” O.D. Chrome Moly Steel Radius Rods1/2” F Threads (used for rear end bridge)

10”10 1/2”11”12”18”


P/NLENGTH

5/8”F Thread X 15 1/2” Long Radius Rod5/8”F Thread X 16” Long Radius Rod5/8”F Thread X 17” Long Radius Rod5/8”F Thread X 17 1/2” Long Radius Rod5/8”F Thread X 18” Long Radius Rod5/8”F Thread X 19” Long Radius Rod3/4”F Thread X 18” Long Radius Rod

BRP 1385-151/2BRP 1385-16BRP 1385-17BRP 1385-171/2BRP 1385-18BRP 1385-19BRP 1386-18

RED P/NDESCRIPTIONBRP 1385-151/2BKBRP 1385-16BK

BRP 1385-171/2BKBRP 1385-18BK

BLACK P/N

BRP 1385-18

3/4” O.D. Aluminum X 1/2”F Threads

Spring Rod Radius Rods

BRP 75220 BRP 13180

BRP RR25SCMade From 1 1/8” X .065 Chrome Moly



WELD IN RADIUS ROD TAP SLUGS

ALUMINUM TAP TUBING

5/8” O.D. X .156” Wall 6061T6 - Taps 3/8”F1” O.D. X .220” Wall 6061T6 - Taps 5/8”F1” O.D. X .220” Wall 6061T6 - Taps 5/8”F1 1/4” O.D. X .330” Wall 6061T6 - Taps 5/8”F1 1/4” O.D. X .330” Wall 6061T6 - Taps 5/8”F

BRP 4340-720BRP 1000BRP 1000-8BRP RR72BRP RR96

P/NDESCRIPTION LENGTH6 FT6 FT8 FT6 FT8 FT

STEEL TUBINGDid You Know...Steel tubing up to 9 feet can be shipped

by UPS. Cutting charges will be assessedon pieces less than 9 feet.

BRP 1486BRP 1490

BRP 1496BRP 1492

STEEL REDUCER BUSHINGSDid You Know...Steel reducer bushings allow you to adaptlarger rod ends to smaller diameter bolts.

1/2”5/8“5/8”5/8“5/8”5/8”5/8”3/4“3/4”


P/NO.D.3/8”1/2”1/2”1/2”1/2”1/2”1/2”1/2”5/8”

LENGTH.625”.500”.750”1.25”1.625”2.00”2.50”.750”.750”

I.D.

ALUMINUM REDUCER SPACERS

3/8”1/2”

BRP 4060BRP 4058

P/NO.D.5/16”3/8”

SPACER WIDTH1/8”1/4”

I.D.

Did You Know...Tap tubing is ready to be tapped for

all your custom projects. We also carry left andright hands taps. See below

for more details.

1” X .065” Wall1“ X .095” Wall1” X .120“ Wall1 1/8” X .065” Wall1 1/8“ X .095” Wall1 1/8” X .120” Wall1 1/4” X .095” Wall1 1/2” X .095” Wall1 1/2” X .120” Wall

MAT 1.00X065DOMMAT 1.00X095DOMMAT 1.00X120DOM

MAT 1.125X120DOMMAT 1.25X095DOMMAT 1.50X095DOMMAT 1.50X120DOM

4130 CHROMEMOLY1020 DOMTUBING SIZEMAT 1.00X065CMMAT 1.00X095CM

MAT 1.125X065CMMAT 1.25X095CM

MAT 1.25X095CMMAT 1.50X095CMMAT 1.50X120CM

ERW

MAT 1.25X095ERWMAT 1.50X095ERWMAT 1.50X120ERW

3/8”-24 (Fine Thread) Left Hand Tap3/8”-24 (Fine Thread) Right Hand Tap1/2”-20 (Fine Thread) Left Hand Tap7/16”-20 (Fine Thread) Left Hand Tap5/8”-18 (Fine Thread) Left Hand Tap5/8”-18 (Fine Thread) Right Hand Tap3/4”-16 (Fine Thread) Left Hand Tap

BRT TO624LBRT TO624RBRT TO820LBRT TO720LBRT T1018LBRT T1018RBRT T1216L

P/NDESCRIPTION

TAPS

BRT TO720L

5/8” O.D. X 3/8” I.D. X 3/4” Long Weld Slug1” O.D. X 1/2” I.D. X 1” Long Weld Slug3/4” O.D. X 1/2” I.D. X 2 3/4” Long Weld Slug

MFG CHA20MFG CHA28MFG CHA49

P/NDESCRIPTION

1/2”-20F1/2”-20F1/2”-20F1/2”-20F5/8”-18F5/8”-18F5/8”-18F5/8”-18F3/4”-16F3/4”-16F3/4”-16F3/4”-16F

BRP 1496BRP 1497BRP 1488BRP 1489BRP 1486BRP 1487BRP 1490BRP 1491BRP 1494BRP 1495BRP 1492BRP 1493

P/NTHREAD

RHLHRHLHRHLHRHLHRHLHRHLH

SLUG FITSINSIDE TUBING DIAMETER

1” X .065“ Wall1” X .065” Wall1” X .120”Wall1” X .120” Wall1 1/8” X .065” Wall1 1/8” X .065” Wall1 1/8” X .120” Wall1 1/8” X .120” Wall1 1/8” X .065” Wall1 1/8” X .065” Wall1 1/4” X .095” Wall1 1/4” X .095” Wall

XXXXXXXXXXXX

Radius Rod Tap Bungs(for making your own radius rods)

NON TAPPED Radius Rod Chassis Slugs

1/2”C X 3/4” O.D. Tapped Radius Rod Slug2 1/4” Long with machined taper (front radius rods)5/8”C X 7/8” O.D. Tapped Radius Rod Slug2 1/4” Long (Left Rear Bottom 2 X 4 Slug)5/8”C X 7/8” O.D. Tapped Radius Rod Slug2 3/4” Long (Rear Radius Rod Slugs)1/2”F X 3/4” O.D. X 1 3/4” Long Tapped Slug

BRP 1514

MFG CHA206

MFG CHA207MFG CHA31

P/NDESCRIPTIONTapped Radius Rod Chassis Slugs

BRP 748

NOTE: May be zinc plated gold or black



15

STEEL TAPERED SPACERS

Did You Know...BRP 755 spacer is used to

space the tie rod and drag linkaway from steering arm

1/4”1/2”5/8”3/4”1 1/4”2 1/4”

BRP 724BRP 721

BRP 735

LENGTH 7/8” O.D.1/2”BORE

1” O.D.1/2”BORE

1” O.D5/8”BORE

1 1/8” O.D3/4”BOREBRP 733BRP 734

BRP 720-1

BRP 718BRP 719

BRP 720

ALUMINUM TAPERED SPACERS

1/2”5/8”3/4”1”1 1/4”1 1/2”1 3/4”2 1/4”

BRP 742

LENGTH 1/2”BORE

BRP 746

BRP 747

BRP 736BRP 722BRP 736-1BRP 737BRP 739BRP 738BRP 436BRP 437

BRP 730BRP 483BRP 730-1BRP 731

BRP 732

5/8”BORE1” O.D. 1 1/4” O.D.

1/2”BORE 5/8”BORE 3/4”BORE1 1/2” O.D.5/8” BORE

BRP 760

BRP 762BRP 763 BRP 755

ALUMINUM SPACERS

Misc. Aluminum Spacers

.125”

.050”

.625”1.425”.380”.175”.1875”.375“.375”1.875”.250”

BRP 433SBRP 9072BRP 9073BRP 9074BRP 277SBRP 950SBRP 275-2BRP 4053BRP 4056BRP 9137BRP 4245

LENGTH I.D. O.D. P/N.410”.377”.377”.377”.380”.625”.380”.375”.375”.375”.675”

.770”

.800”

.800”

.800”

.625”

.750”

.625”

.875“

.875”

.800”

.875”

STEEL SPACERS

2 1/2”3”

BRP 427-4BRP 9103

LENGTH I.D. O.D. P/N5/8”5/8”

1”1”

Did You Know...BRP 4245 is used in a BRP 4249

in place of a BRP 4248.

3/8” I.D. Flat Aluminum Spacers

1/8”3/16“1/4”

5/16“3/8”

7/16“1/2”

9/16“5/8”

.700“3/4”

.800“

.845”1“

1.16”1.195“1.25”1.37“1 1/2”1.62”

1.785“1 7/8”

2“2 1/8”2.20“2 1/4”2 1/2“3.30”3 1/2”

4”4.885”4 7/8”5 1/4

LENGTH 3/8” HOLE -- 13/16” O.D.

BRP 705BRP 706BRP 707BRP 708BRP 709BRP 711BRP 710

BRP 4065

BRP 485

PLAIN BLACKRED

BRP 497

BRP 491

BRP 494

BRP 481

BRP 480

BRP 497BK

BRP 491BK

1/8”3/16“1/4”

5/16“3/8”

7/16“1/2”

9/16“5/8”

.700“3/4”

.800“

.845”1“

1.16”1.195“1.25”1.37“1 1/2”1.62”

1.785“1 7/8”

2“2 1/8”2.20“2 1/4”2 1/2“3.30”3 1/2”

4”4.885”4 7/8”5 1/4”

LENGTH 1/2” HOLE -- 1” O.D.


BRP 4555BRP 717-1

BRP 693-1BRP 693-2BRP 693-3BRP 726

BRP 4556


BRP 934

PLAIN BLACKRED

BRP 716BK

BRP 693-1BK

BRP 697BKBRP 482BK

BRP 699BKBRP 704

BRP 694BRP 692

BRP 717

BRP 693

BRP 696

BRP 695

1/2” I.D. Flat Aluminum Spacers


STREET STOCK BUMPERS STREET STOCK FRONT BUMPERS

STREET STOCK REAR BUMPERS

Monte Carlo 1 Piece Front Bumper - WHITEMonte Carlo 1 Piece Front Bumper - BLACK

PBI 211040PBI 212040

P/NDESCRIPTION

Monte Carlo Front Bumpers

PBI 211040

HOW B722

HOW B724

Camaro Upper Front Bumper - BLACKCamaro Lower Front Bumper - BLACK

HOW B722HOW B724

P/NDESCRIPTION

Camaro Front Bumpers

PBI 211100

Monte Carlo 1 Piece Rear Bumper - WHITEMonte Carlo 1 Piece Rear Bumper - BLACK

PBI 211100PBI 212100

P/NDESCRIPTION

Monte Carlo Rear Bumpers

RIVETS & DUCT TAPE

1/8” Small Head3/16” Small Head3/16” Small Head3/16” Small Head3/16“ Small Head3/16” Small Head3/16” Small Head3/16“ Small Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Back up Washer

COLORDESCRIPTION P/NBRB 1825BRB 825BRB 925BRB 1025BRB 525-URRBRB 1925BRB 630BRB 725BRB 1125BRB 1225BRB 1425BRB 1525BRB 1625BRB 1725ALL 18202

PlainRed

YellowWhiteBlueBlackPlainPlainPlainWhiteBlueBlackYellowRedSteel

QTY250250250250250250300250250250250250250250250

BRB 1725

RedBlue

YellowBlackSilverWhite

OrangePurple

COLOR P/NISC RT3001ISC RT3002ISC RT3003ISC RT3004ISC RT3005ISC RT3006ISC RT3008ISC RT3010

Duct TapeRivets


OEM SUSPENSION COMPONENTS

17

UPPER CONTROL ARMS

ADJUSTABLE CROSS SHAFTS

8”8 1/2”

8”8 1/2“

9”9 1/2”10”

LENGTH APPLICATIONMetric Right Side Metric Left Side8” Camaro Upper Control Arm8 1/2” Camaro Upper Control Arm9” Camaro Upper Control Arm9 1/2” Camaro Upper Control Arm10” Camaro Upper Control Arm

STEEL P/NPCR 100-06-0800RHS-1PCR 100-06-0820LHS-1PCR 100-05-0800SPCR 100-05-0820SPCR 100-05-0900SPCR 100-05-0920SPCR 100-05-1000S

1-1/4"

8”

CL

METRICTYPE

Port City Racing 4 Bolt Upper Control Arms

AVAILABLE IN STEEL AND ALUMINUMBRP 5200

BRP 5202 BOL 1300-112 BRE COM10

Steel AssemblyAluminum AssemblySteel Shaft OnlyAluminum Shaft OnlyMonoball BearingBearing Retainer HousingSteel SpacerSnap Ring

BRP 5200BRP 5200ABRP 5201BRP 5201ABRE COM10BRP 5202BRP 721BOL 1300-112

5/8” ENDDESCRIPTION 3/4” ENDBRP 5211N/ABRP 5212N/ABRE COM12BRP 5213BRP 734BOL 1300-137

Offset Camber Adjustable Bushings for 5200/5201/5211/5212 Cross Shaft

01/16”1/8”

3/16”1/4”

5/16”3/8”

No Hole

DEGREEOF OFFSET

ALUMINUM1/2” HOLE

ALUMINUM9/16” HOLE

STEEL


BRP 5204-9/16BRP 5205-9/16BRP 5206-9/16BRP 5207-9/16BRP 5208-9/16BRP 5209-9/16BRP 5210-9/16

BRP 5220

BRP 5220

BRP 5210

ALUMINUM CROSS SHAFTS

11 1/4” Aluminum Cross shaft (holes 6” center to center).875” I.D. Bushing for BRP 5198 (sold each)11 1/2” Aluminum Cross shaft (no holes)1” I.D. Bushing for BRP 2011 (sold each)

BRP 5198BRP 5196BRP 2011BRP 2012

P/NDESCRIPTION

BRP 2011 NO HOLES

BRP 5198 HOLES 6” CENTER TO CENTERBRP 5196

Did You Know...Offset camber bushings areavailable with 1/2” holes and9/16” holes... be sure to order

the correct application!

BRP 6185

BRP 6191

SWIVEL STABILIZER EYES

Aluminum Assembly- 7/8”C Threads Swivel Eye Replacement Aluminum EyeReplacement Aluminum Shaft- 7/8”C ThreadsSteel Assembly- 7/8”C ThreadsReplacement Steel EyeReplacement Steel Shaft- 7/8”C Threads7/8”C weld nut


P/NDESCRIPTION1/4”C detent ball3/8”C detent ballSolid Aluminum eye bolt -7/8”C ThreadsSolid Steel eye bolt- 7/8”C Threads7/8”C Jam Nut

BRP 509008BRP 509009BRP 6180PCR 100-2815BRP 6182

P/NDESCRIPTION

BRP 6188

BRP 6180



UPPER BALL JOINTS

Most popular ball joint. Fits Shaw, Howe, WRC, Rayburn, Harris, & upper taper of pinto spindleFull size 71-84 Impala spindles, 71-81 Camaro & 73-84 chevelle. Does not fit AFCO armUsed on IMCA cars to raise roll center. Fits AFCO upper upper arms64-72 Chevelle lower arm and spindle. Most popular IMCA modified applicationFits Troyer & Howe modifieds. Also fits upper and lower taper in pinto spindle (same taper as AFC 20031)

AFC 20031AFC 20032AFC 20032-1AFC 20033AFC 20034

P/NDESCRIPTION

BALL JOINT SLEEVES

AFC 20031 AFC 20032 AFC 20032-1 AFC 20033 AFC 20034

LOWER BALL JOINTS

PCR 100-3K719 AFC 20036 AFC 20038 AFC 20038-1 AFC 20039

Fits Troyer Upper and lowerMost popular lower ball joint. Fits nearly all strut carsFits all Howe cars & wide type dirt cars. Also fits 71-76 Impala spindleUsed on IMCA cars to raise roll centers. Fits Impala spindle and welds into stock lower control armS-10 joint used on some mini-stocks. Also fits 71-81 Camaro, 73-84 Chevelle, and 77-84 Impala

PCR 100-3K719AFC 20036AFC 20038AFC 20038-1AFC 20039

P/NDESCRIPTION

BRP 5160 BRP 5161 ALL 56250 BRP 5163 BRP 5164 BRP 5165

Large threaded sleeve with flange. Fits AFC 20036 ball jointLarge threaded sleeve. Fits AFC 20036 ball jointSmall threaded sleeve. Fits AFC 20034 & PCR 100-3K719 ball jointsSmooth bore sleeve. Fits AFC 20039 ball jointSmooth bore sleeve. Fits AFC 20038 ball jointSmooth bore sleeve. Fits AFC 20038-1

BRP 5160BRP 5161ALL 56250BRP 5163BRP 5164BRP 5165

P/NDESCRIPTION

Did You Know...This Upper Control Arm Mount ismade from 3/8” steel plate, has 6”hole centers and has 2 degrees

of anti-dive.

CONTROL ARM MOUNTS

3/8” Steel Upper Control Arm Mounting Plate BRP 2015P/NDESCRIPTION

METRIC CAMARO

BALL JOINT ADAPTOR BUSHING

Adaptor Bushing- used to adapt AFC 20038 ball jointto AFC 20036 taper and works with most dirt spindles. BRP 5166

P/NDESCRIPTION

BRP 5166

BRP 2015

6” center to center



19

TAPERED REAMERS

1 1/2” per foot Taper

2” per foot TaperAFC 80770AFC 80771

P/NDESCRIPTION APPLICATIONMost Tie Rod, Shock eyes, and ball joint AFC20031,20034, 20036and PCR 100-3K719Ball Joints AFC 20032, 20032-1,20038,20038-1, & 20039

CONTROL ARM BUSHINGS

BRP 51881.4” Diameter, 2.39” Long








Steel Control Arm BushingsLOWER

Did You Know...Bicknell Racing Products also stocks manyother tools too! Check out the tool section

of this catalog to see other tools...

‘78 - ’88 Monte Carlo / Malibu / Chevelle / Regal‘75 - ’77 Monte Carlo / Malibu / Chevelle / Regal‘73 - ’74 Monte Carlo / Malibu / Chevelle / Regal‘67 - ’72 RB Monte Carlo / Malibu / Chevelle / Regal‘78 - ’87 Cutlass / Grand Prix‘73 - ’77 Cutlass / Grand Prix‘69 - ’72 Cutlass / Grand Prix‘71 - ’96 Caprice / Impala‘73 - ‘79 Camaro / Firebird / Trans-Am’67 - ‘72 Camaro / Firebird / Trans-Am’75 - ‘79 Nova’68 - ‘74 Nova

BRP 5192BRP 5189BRP 5188BRP 5188BRP 5192BRP 5189BRP 5188BRP 5189BRP 5189BRP 5188BRP 5189BRP 5188

FRONTDESCRIPTION REARBRP 5189BRP 5190BRP 5190BRP 5189BRP 5189BRP 5190BRP 5188BRP 5190BRP 5190BRP 5189BRP 5190BRP 5189

Steel Control Arm BushingsUPPER

‘78 - ’88 Monte Carlo / Malibu / Chevelle / Regal‘74 - ’77 Monte Carlo / Malibu / Chevelle / Regal‘73 Monte Carlo / Malibu / Chevelle / Regal‘67 - ’72 Monte Carlo / Malibu / Chevelle / Regal‘78 - ’88 Cutlass / Grand Prix‘74 - ’77 Cutlass / Grand Prix‘73 Cutlass / Grand Prix‘67 - ’72 Cutlass / Grand Prix‘80 - ’96 Caprice /Impala‘74 - ’79 Caprice /Impala‘71 - ’73 Caprice /Impala‘71 - 79 Camaro’67 - ‘69 Camaro’75 - ‘79 Firebird / Trans Am‘70 - ’74 Firebird / Trans Am‘67 - ’69 Firebird / Trans Am‘75 - ’79 Nova‘68 - ’74 Nova

BRP 5193BRP 5194BRP 5195BRP 5191BRP 5193BRP 5194BRP 5195BRP 5191BRP 5194BRP 5194BRP 5195BRP 5194BRP 5191BRP 5194BRP 5195BRP 5191BRP 5194BRP 5191

FRONTDESCRIPTION REARBRP 5193BRP 5195BRP 5195BRP 5191BRP 5193BRP 5195BRP 5195BRP 5191BRP 5194BRP 5195BRP 5195BRP 5195BRP 5191BRP 5195BRP 5195BRP 5191BRP 5195BRP 5191


N.E. MODIFIED FRONT SUSPENSIONNORTHEAST MODIFIED FRONT AXLES

50”52”52”

50“52”

BRP EC50/*BRP EC52/*

BRP IH50/*

LENGTHBRP EC50BO*BRP EC52BO*

BRP IH50BO*

BRP EC52/3*

BRP IH50/3*

BRP EC50BRP EC52

BRP IH50*BRP IH52*

BRP EC50BOCBRP EC52BOCBRP EC52BOC-4

BARE AXLE 3 BAR AXLE 4 BAR AXLEBOLT ON

AXLE BRACKETSBOLT ON AXLE

BRACKETS WITH CAMBERSTYLEFORD .859”

King Pin Diameter

International .988”King Pin Diameter

+4° LF CAMBER

* indicates special order - call for availability.Used on 2000 to present BRP chassis

Did You Know...BRP axles are made from

Chromemoly tubing. Don’t be fooled by“imposter” front axles that may bend easily!

Front Axle for Syracuse only. (will not work on short tracks)Front Axle bolt kit (comes with all necessary bolts to mount front end)

BRP EC52BOC-SYRBRP 408-5

P/NDESCRIPTION

Bicknell Ford 10 degree eye endSet screws for Front Axles (sold in packages of 2)

BRP 7118BOL 0603756F

P/NDESCRIPTION

BRP 7118FRONT AXLE KITS

All kits start with BRP EC52BOC front axle

ALL AXLES AVAILABLE POWDER COATEDBLACK ONLY. ADD -3 TO END OF PART NUMBER

EXAMPLE: BRP FE1223

“FE” stands for front end,and is the same for all kits.

BRP LINE CODE

BRP 9200 Spindle / BRP 4570 Hub BRP 4588 Spindle / WIN 3266F HubBRP 4588 Spindle / BRP 9382 Hub

123

P/N POSITION 1

SPINDLE / HUB OPTION

BRP 9200BRP 4570BRP 65WBRP 835BRP 828BRP 829BRP 831LBRP 1623BRP 1505BRP 209BRP 211BRP RR481/2BRE 5101LBRE 5010RBRP 786BRP 787BRP 18-2375BRP 408-5

222222212111111121

QTY PART # DESCRIPTIONSpindles w/ kingpinsHubs10 7/8” X 3/8” RotorsHub SealInner BearingOuter BearingLocking Nut AssemblyPanhard MountAxles BracketsLF Steering ArmRF Steering ArmTie RodTie Rod Heim EndTie Rod Heim EndJam NutJam NutCaliper BracketFront End Bolt Kit

KIT #1

BRP 4588WIN 3266FBRP 67BRP 6225BRP 6224BRP 6230BRP 1623BRP 1505BRP 209BRP 211BRP RR481/2BRE 5101LBRE 5010RBRP 786BRP 787BRP 19BRP 408-5

22224212111111121

QTY PART # DESCRIPTIONSpindles w/ kingpinsHubs12 X 3/8” RotorsHub SealBearingsLocking Nut AssemblyPanhard MountAxles BracketsLF Steering ArmRF Steering ArmTie RodTie Rod Heim EndTie Rod Heim EndJam NutJam NutCaliper BracketFront End Bolt Kit

KIT #2

BRP 4588BRP 9382BRP 65WWIN 7284VBRP 6224BRP 6230BRP 1623BRP 1505BRP 9087BRP 9140BRP RR471/2BRE 5101LBRE 5010RBRP 786BRP 787BRP 9390BRP 408-5

22224212111111121

QTY PART # DESCRIPTIONSpindles w/ kingpinsLarge Bearing Hubs10 7/8” X 3/8” RotorsHub SealBearingsLocking Nut AssemblyPanhard MountAxles BracketsLF Ackerman Steering ArmRF Ackerman Steering ArmTie RodTie Rod Heim EndTie Rod Heim EndJam NutJam NutCaliper BracketFront End Bolt Kit

KIT #3

Caliper / Pad Selection:1- No Calipers / Pads

2- BRP 170-1526 with PFC Pads

Assembled or Kit Form:1- All Parts Boxed in Kit

2- Assembled and ready to Bolt In

AXLE COLOUR0 - NO PAINT

3- POWDER COATED BLACK

All kits start with BRP EC52BOC front axle

ADD “BK” ForBlack Bolt On Parts


N.E. MODIFIED FRONT SUSPENSION

21

FRONT AXLE BRACKETS

FRONT PANHARD MOUNTS

Bicknell Downtube 4 Bar Bolt on bracket- 7 1/4” bolt spacing Bicknell 2000 to present 4 Bar Bolt on bracket- 5 1/4” spacing Bicknell 2000 to present 4 Bar Bolt on 2” drop bracket for Bilstein BGT Series Shocks (large nitrogen chamber)- 5 1/4” spacing

BRP 1502RDBRP 1505

BRP 1501

RED P/NDESCRIPTION BLACK P/NBRP 1502BKBRP 1505BK

BRP 1501BK

PLAIN P/NBRP 1502

CLAMP ON SLIDERS

BRP 1623BKBRP 1503

BRP 398

1 1/2” Front Panhard slider (for 2000-present cars) BRP 398RED P/NDESCRIPTION BLACK P/N

BRP 398BK

Did You Know...BRP chassis use BRP 1505 axle brackets,

and with Bilstein BGT series shocksyou can also use BRP 1501 for added clearance.

Did You Know...BRP chassis use BRP 1623 panhard mount,

BRP 398 clamp, and takes a BRP 1210panhard bar.

Front Panhard Mount kit- 3 holes red anodizedHeavy Duty Front Panhard Mount kit- 2 holes red anodized

BRP 1503BRP 1623

RED P/NDESCRIPTION

*Kits also come with mounting bolts*

BLACK P/NBRP 1503BKBRP 1623BK

BRP 1503BRP 1623

Heavy Duty AluminumHeavy Duty AluminumHeavy Duty AluminumHeavy Duty AluminumLightweight AluminumLightweight AluminumLightweight AluminumLightweight AluminumLightweight AluminumLightweight AluminumHeavy Duty Steel - IMCA LEGALLightweight Aluminum

BRP 391BRP 392BRP 390BRP 393BRP 394BRP 395BRP 396BRP 396-1BRP 396-2BRP 397-2BRP 399

RED P/NDESCRIPTION WIDTH BOLT SIZETUBE SIZE3/4”5/8”3/4”5/8”5/8”1/2”1/2”1/2”3/4”3/4”3/4”5/8”

1 1/2”1 3/4”1 3/4”1 1/2”1 1/2”1 1/4”1 1/2”1 1/2”1 1/2”1 3/4”1 3/4”1 1/2”

2”2”2”2”

1 1/2”1 1/4”

1”1 1/2”1 1/2”1 1/2”1 1/2”1 1/2”

BRP 393BK

BRP 396BK

BRP 397-2BK

BRP 9357

BLACK P/N

BRP 391 BRP 396

BRP 1505BK BRP 1502BK BRP 1501

NON BINDING FRONT AXLE BRACKETS

Standard Non Binding Axle Bracket - 5 1/4” Bolt Spacing(replaces BRP 1505) - Anodized BlackDrop Non Binding Axle Bracket - 5 1/4” Bolt Spacing (replaces BRP 1501) - Anodized BlackReplacement Plastic Washer OnlyReplacement Inner Bearing Only

BRP 9329BK

BRP 9330BRP 9329DBRP 9329C

P/NDESCRIPTION

BRP 9329BK BRP 9330

FRONT PANHARD MOUNT

Front Adjustable Panhard MountReplacement Quick Change Pin

BRP 9369BRP 9369C

P/NDESCRIPTION

BRP 9369

BRP 9329D

BRP 9329C

Adjustable Front Panhard Mounts

Clamp On Front Panhard MountsBRP 9369C



KING PIN DRIFT PUNCH

BRP 10 DEGREE FORGED WIDE SPREAD BEARING SPINDLE

Aluminum .859” King pin drift punch BRP 847P/NDESCRIPTION

BRP841

BRP 842BRP 4584

10 Degree Spindle with .859” King PinDid You Know...BRP spindles are made from forged

7075 aluminum for ultimate strength. Theyweigh in at 4.60 # with kingpin.

Features include:-replaceable bronze bushings.

-made from forged 7075 aluminum.-Spindle snout is threaded into bodyfor high strength while reverse threadlocknut keeps snout tight under racing

conditions.-Works with BRP 4570 Hub.

BRP WIDE 5 WIDE SPREAD HUB

Did You Know...When mounting a BRP 4570 to a BRP9200spindle, Use a BRP 65 or BRP 65W brake rotor, and a BRP 8-2250 or BRP 18-2375

brake bracket.

Aluminum Wide 5 Hub (includes Cap)Replacement Dust CapReplacement Inner raceReplacement Outer raceInner bearingOuter bearingAluminum locking spindle nut assemblyInner hub sealTaper head rotor bolt (sold each 3 required) 1/2”F X 1”Taper head rotor bolt kit - package of 3 (1/2”F X 1”)Replacement Wheel Stud

BRP 826BRP 827BRP 828BRP 829

BRP 831LBRP 835

BOL 081003FBRP 53

BRP 2060

RED P/NDESCRIPTION

Inner and outer bearings, seals,and wheel nuts sold seperately.

BRP 831W

Did You Know...This BRP 4570 hub is designed to work

with BRP 9200 spindle above. It weighs in at aslender 7# with studs and races.

Includes BRP 4571 dust cap, 3X BOL 081003F rotor bolts.Does not include bearings, seal, or spindle nut.

Also has quick release front cap!

Did You Know...The Spindle snout is recessed into the

aluminum spindle body for addedstrength!

BLACK P/NBRP 4570 BRP 4570BK

BRP 4571

Aluminum spindle kit with hollow steel kingpin, steel snout & lock nutAluminum spindle kit with hollow titanium kingpin, steel snout & lock nutAluminum spindle kit with hollow titanium kingpin, titanium snout & lock nutReplacement snout and lock capReplacement snout onlyReplacment lock cap onlySnout wrenchReplacement king pin with 2 end capsReplacement end caps for 841 (sold each)Optional titanium king pin with capsReplacement cap for BRP 841T king pin (sold each)Replacement king pin bushing (sold each)1/8” Aluminum spindle shim spacer - Ford kingpinSteel Kingpin Shim for Ford Kingpin - .005” ThickSteel Kingpin Shim for Ford Kingpin - .031” ThickLock nut Assembly (includes locknut, tab washer, thrust washer & bolts)Wrench for BRP 831L lock nut

BRP 9200BRP 9200TBRP 9200TTBRP 9203BRP 9202BRP 4591BRP 4584BRP 841BRP 841CBRP 841TBRP 841TCBRP 842BRP 843WIN 7514WIN 7512BRP 831LBRP 831W

P/NDESCRIPTION

BRP 831L



23


ORIGINAL BRP 9210 10 DEGREE SPINDLE


Aluminum spindle kit with hollow steel kingpin, steel snout & lock nutAluminum spindle kit with hollow steel titanium, steel snout & lock nutReplacement snout and lock capReplacement snout onlyReplacement lock cap onlySnout wrenchReplacement king pin with 2 end capsReplacement end caps (sold each)Optional titanium king pinReplacement cap for titanium king pin (sold each)Replacement kingpin bushing (sold each)1/8” Aluminum spindle shim spacerSteel kingpin shim for Ford kingpin - .005” thickSteel kingpin shim for Ford kingpin - .031” thickLock nut assemblyWrench for BRP 831L lock nut

BRP 9210BRP 9210TBRP 9213BRP 9212BRP 4591BRP 4584BRP 841BRP 841CBRP 841TBRP 841TCBRP 842BRP 843WIN 7514WIN 7512BRP 831LBRP 831W

P/NDESCRIPTION

10 Degree Spindle with .859” King Pin

Aluminum Wide 5 hubReplacement Inner raceReplacement Outer raceInner bearingOuter bearingAluminum locking spindle nut assemblyInner hub sealReplacement Dust capTaper head rotor bolt (sold each, 3 required) 1/2”F X 1”Taper head rotor bolt kit 1/2”F X 1”Replacement Wheel Stud

BRP 826BRP 827BRP 828BRP 829BRP 831LBRP 835BRP 832BOL 081003FBRP 53BRP 2060

RED P/NDESCRIPTION BLACK P/NBRP 821 BRP 821BK

Did You Know...BRP spindles are made from forged

7075 aluminum for ultimate strength. Theyweigh in at 4.60 # with kingpin.



conditions.

BRP ORIGINAL 821 WIDE 5 HUBDid You Know...

When mounting a BRP 821 to a BRP 9210spindle, Use a BRP 65 or BRP 65W brake rotor, and a BRP 8-2250 or BRP 18-2375

brake bracket.

Inner and outer bearings, seals,and wheel nuts sold seperately.


with BRP 9210 spindle above. It weighs in at aslender 7# with studs and races.

BRP 821 includes BRP 832 dust cap,and 3 BOL 081003F rotor bolts.

BRP841

BRP 842BRP 4584

BRP 831W

BRP 831L


N.E. MODIFIED FRONT SUSPENSIONBRP 4588 LARGE BEARING MODIFIED FRONT SPINDLE

Large Bearing aluminum spindle kit with hollow steel king pinLarge Bearing Aluminum spindle kit with titanium king pin Replacement steel king pin with 2 end capsReplacement end caps for steel king pin (sold each)Replacement aluminum Snout OnlyReplacement titanium king pin with capsReplacement cap for titanium king pin (sold each)Replacement king pin bushing (sold each)1/8” Aluminum spindle shim spacerSteel Kingpin Shim - .005” ThickSteel Kingpin Shim - .031” ThickLock nut assemblyWrench for BRP 6230 lock nutReplacement steel lock nut only (no hardware)Replacement outer washer and screwReplacement screw with washer (package of 2)Steering arm mounting hardware kit (2 BOL 082C, 2 BOL 083507C)Center spindle plug (required for oil filled hubs)

BRP 4588BRP 4588TBRP 841BRP 841CBRP 4585BRP 841TBRP 841TCBRP 842BRP 843WIN 7514WIN 7512BRP 6230BRP 6231BRP 6229BRP 6227BRP 6228BRP 4588BBRP 9397

P/NDESCRIPTION

BRP 841

BRP 842

BRP 6231

10 Degree Spindle with .859” King Pin

Aluminum Wide 5 large bearing hub (comes with dust cap)Replacement Dust Cap (comes with 1- NIA 045, 3 - BOL 10240502CReplacement Adaptor - Includes wheel studsInner raceOuter raceInner bearingOuter bearingSteel locking spindle nut assemblyInner hub sealReplacement seal snap ringLow drag inner hub seal (will not work for oil filled hubs)Replacement adaptor bolts - (package of 10) BOL 061252HRotor bolt kit (package of 8)Replacement Wheel Stud


BRP 50BRP 2060

RED P/NDESCRIPTION BLACK P/NBRP 6203

BRP 6201B

BRP 6203BKBRP 6203C

BRP 6201BBK



BRP 6203 LARGE BEARING FRONT HUB

Inner and outer bearings, seals,and wheel nuts sold separately.

Did You Know...BRP 4588 Spindle is made with an

aluminum snout- it weighs in at only 4.4 pounds with kingpin.



conditions.-Works with BRP 6203 or WIN 3266F

or BER CTD-NYM-H01

Did You Know...When mounting a BRP 6203 to a BRP4588spindle, Use a BRP 67 rotor with a BRP 19

caliper bracket.


with BRP 4588 spindle above.

BRP 6230

Also has quick release dust cap!



25

ADJUSTABLE CAMBER FRONT SPINDLES

Replacement Ball Joint Cap (king pin retainer)Replacement Locking Tab for king pin retainer (bottom of sprindle)Replacement com washerReplacement Steel King PinReplacement Titanium King PinReplacement King Pin WasherReplacement 0° PillReplacement 1° PillReplacement 2° Pill

BRP 9206BRP 9206ABRP 9207BRP 9208BRP 9208TBRP 9208WBRP 9209-0BRP 9209-1BRP 9209-2

P/NDESCRIPTION

Spindles comes with 0°, 1°, & 2° pills, king pin,and king pin washer.

Installation wrench (BRP 4584) is required toinstall king pin ball joint cap (BRP 9206)- sold separately.

Note: Only Factory Repairable With Com Bearing.BRP 9209-0 BRP 9209-1 BRP 9209-2

LARGE BEARING BILLET FRONT HUB

Billet Large Bearing Front Hub with 3 bolt rotor (comes with dust cap)3 bolt to 8 on 7” rotor adaptor (also accepts “T” nuts)Floating Rotor “T” Nut Bolt Kit Replacement Dust CapInner raceOuter raceInner bearingOuter bearingReplacement Wheel StudSteel locking spindle nut assemblyInner hub sealLow drag inner hub seal (will not work with oil filled hubs)Replacement seal snap ringReplacement oil fill plugRotor bolt kit (package of 8)Replacement rotor adaptor bolts (3 required)

BRP 9382BRP 9384BRP 9386BRP 6203CBRP 6222BRP 6222BRP 6224BRP 6224BRP 2060BRP 6230BRP 6225BRP 6232BRP 6223WIN 7874ABRP 50BOL 081003F

P/NDESCRIPTION

LARGE BEARING SPACER KITS

Inner and outer bearings, seals,and wheel nuts sold separately.

Front Bearing Spacer KitSetup Spindle - mounts on workbench for easy adjustmentCenter Spindle Plug for BRP 4588 Spindle (required when oilfilling BRP 9382 hubs)Rear Bearing Spacer Kit

BRP 9392BRP 9396

BRP 9397BRP 9393

P/NDESCRIPTION

BRP 9382

BRP 9392 BRP 9396

BRP 9397

Adjustable Camber Large Bearing Spindle With Steel King Pin Adjustable Camber Large Bearing Spindle With Titanium King PinSnout Retainer Installation Wrench / King pin retainer wrenchReplacement Snout OnlyReplacement Inner Locking Snout Cap OnlyCenter spindle plug (required for oil filled hubs)

BRP 9215BRP 9215TBRP 4584BRP 4585BRP 4583BRP 9397

P/NDESCRIPTION

6 Pin Style 10 Degree Spindle with .859” King Pin

Adjustable Camber Spindle - 6 Pin Style (uses BRP 4570 Hub)Adjustable Camber Spindle - With Steel Snout and Titanium King Pin Adjustable Camber Spindle - With Titanium Snout and King PinInstallation Wrench / King pin retainer wrenchReplacement Steel Snout OnlyReplacement Inner Locking Snout Cap OnlyReplacement Steel Snout With Locking Cap AssemblyReplacement Titanium Snout OnlyReplacement Titanium Locking Cap OnlyReplacement Titanium Snout With Locking Cap Assembly

BRP 9214BRP 9214TBRP 9214TTBRP 4584BRP 9202BRP 4591BRP 9203BRP 9202TBRP 4591TBRP 9203T

P/NDESCRIPTION

Large Bearing 10 Degree Spindle with .859” King Pin

Spindle Common Parts

BRP 9214

BRP 9215



ALUMINUM 6 PIN FRONT HUBS

6 PIN ROTOR ADAPTOR

3/8” thick 3 bolt to 8 on 7” rotor adaptor 3/8” thick 3 bolt to 8 on 7“ rotor adaptor (also can use tee nuts to float rotor)1/2” thick asphalt 3 bolt to 8 on 7“ rotor adaptor Steel asphalt front brake bracket (uses 2800 series caliper, 11 3/4” dia.X .810 thick rotor, BRP 9067 adaptor & BRP 4570 hub and BRP 9200 spindle)Steel asphalt front brake bracket (uses 2000 series caliper, 11 3/4” dia.X .810 thick rotor, BRP 6203 / BRP 9382 / WIN 3266F hub, andBRP 4588 spindle (when using 9382 hub, the BRP 9067 adaptor is required)

BRP 813

BRP 9067


BRP 9384

BRP 9066

BRP 9065

BRP 825-1 MODIFIED HUB KIT1” DEEP HUB FACE

6 Pin Hubs & Parts

BRP 813

BRP 825LW SPRINT CAR HUB KIT1 1/2” DEEP HUB FACE

INTERNATIONAL STEEL SPINDLE

Spindle kit with kingpin, spacer, & locking nut.Hollow replacement kingpin (.988” O.D.)King pin cap (sold each)Lower bolt on spindle bossLower bolt on spindle boss (recommended for asphalt cars)Made from High Strength SteelUpper bolt on spindle bossSpindle plate assemblySpindle Bolts (4 required)Kingpin bushing (sold each)1/8” aluminum spindle shim spacerAluminum spindle lock nut kitReplacement washers & screws for BRP 320 lock nut kit

BRP 1664BRP 1660BRP 1662BRP 1669

BRP 1669SBRP 1670BRP 1671BRP 1672BRP 1673BRP 844BRP 320BRP 320W

P/NDESCRIPTION

BRP 1664

SWAY BAR COMPONENTS

1 1/8” I.D. 2 piece aluminum sway bar mount1 1/8” I.D. aluminum locating/lock collar1/8” Steel weld on chassis tab for mounting BRP 1570 mount

BRP 1570BLACK P/NDESCRIPTION

BRP 1571AMFG CHA6

RED P/NBRP 1570BK

BRP 1570

BRP 1571A

MFG CHA6

1”1 1/8”1 1/8”1 1/8”1 1/8”1 1/8”

BRP 245

BRP 253*BRP 253BBRP 254BRP 254B**

BLACK P/NBROACH HOLES12”,13”,14”24” Long Blank14.5”,15.5”,16.5”14.5”.15.5”,16.5”16”,17”,18”16”,17”,18”

ENDBolt-----BoltBoltBoltBolt

OFFSET0001”05”

BRP 245BK

BRP 253BK*BRP 253BBKBRP 254BKBRP 254BBK**

RED P/N

BRP 249-24

*Used on left front of 2000-present BRP Chassis** Used on right front of 2000-present BRP Chassis

BRP 245 Made from 3/4” Material

FRONT SPINDLE LOCK NUT WRENCHES

BRP 831WSpindle lock nut wrench for BRP 831L (BRP 9200/9210 spindles)Spindle lock nut wrench for BRP 6230 (ALL large bearing spindles)

BRP 831WBRP 6231

P/NDESCRIPTION

BRP 6231

Replacement Inner raceReplacement Outer raceInner bearingOuter bearingSteel locking spindle nutSlotted washer onlyWrench for BRP 831L spindle nutInner hub seal

BRP 826BRP 827BRP 828BRP 829BRP 831LBRP 831L2BRP 831WBRP 835

P/NDESCRIPTIONDust cap with O-ringReplacement O-ring for BRP 8325/8”C wheel stud5/8”C titanium wheel studJam nut for BRP 833 wheel stud5/8”C flat ended aluminum wheel nut (red)Rotor stand kit for BRP 825 hub (red)Long rotor stand kit for BRP 825-1 hub (black)Rotor bolt 1/2”F X 1” Flat head (sold each)

BRP 832BRP 832SBRP 833BRP 833TBRP 834BRP 836BRP 837BRP 838BOL 081003F

P/NDESCRIPTION

Standard sprint hub with studs and races (red rotor stands)Offset modified hub with studs and races (black rotor stands)

BRP 825LWBRP 825-1

P/NDESCRIPTION

BRP 9384

BRP 9066

BRP 9065


N.E. MODIFIED REAR SUSPENSIONADJUSTABLE QUADLOCK BIRDCAGES

BRP 9310 Adjustable QuadLock Birdcage

Complete Universal Adjustable Quadlock BirdcageOuter Adjustable Birdcage PlateInner Adjustable Birdcage PlateUniversal Shock Mount (Includes mounting bolts and stud)Main Center Hub (Includes 2 X 7/16”F X 1 1/2” Allen bolts and nuts)36 Piece Pill Kit (see below)Torsion Bar Roller Replacement Radius Rod Spacer3/8”C X 5” Grade 8 Bolt (bolts birdcage together)3/8” Flat washers3/8”C Grade 8 Lock Nuts1/2”C X 4 1/2” Bolt (roller)1/2”C Narrow Nylock Nut (roller)5/8”C X 3” Bolt (radius rod)5/8”C Nylock Nut (radius rod)Optional Left Rear Double Sheer Heavy Duty Shock MountOptional Right Rear Double Sheer Heavy Duty Shock Mount


BOL 065001C8BOL 06FLAT BOL 062C8

BOL 084501CBOL 083C

BOL 103001CBOL 102CBRP 9399LBRP 9399R

DESCRIPTIONQTY

1111111363111111

P/N

ADJUSTABLE BIRDCAGE PILL KIT

36 Piece Pill Kit - Kit comes with 6 of each of the following pills:6 X 0°, 6 X 1°, 6 X 2°, 6 X 3°, 6 X 4°, 6 X 5°. BRP 9309

P/NDESCRIPTION

5° 4° 3° 2° 1° 0°

**These pills are actual size. Use them to verify the pills you are installing in your birdcages**

ADJUSTABLE BIRDCAGE BRIDGE MOUNT

Adjustable Birdcage Bridge Mount BRP 9406P/NDESCRIPTION

BRP 9310

BRP 9309

BRP 9307 BRP 9399L

BRP 9406

4 Link Right Rear Torsion Bar Birdcage4 Link Left Rear Torsion Bar Birdcage4 Link Right Rear Coil Over Birdcage4 Link Left Rear Coil Over Birdcage4 Link “Live Axle” Right Rear Coil Over Birdcage4 Link “Live Axle” Left Rear Coil Over BirdcageReplacement Roller

BRP 4478BRP 4479BRP 4470BRP 4471BRP 4470-1BRP 4471-1BRP 9284

P/NDESCRIPTION

4 LINK BIRDCAGES

BRP 4478 BRP 4479


N.E. MODIFIED REAR SUSPENSIONLEFT REAR BIRDCAGES

Did You Know...You can also use a clamp on brake bracketfor added braking strength. See page 63 for

applications.

BRP 9032 Left Rear QuadLock Birdcage

BRP 4255 Left Rear Large Bearing Birdcage

Complete Left Rear QuadLock Birdcage Kit2 1/4” Aluminum Birdcage Spacer1/4” Steel Radius Rod SpacerOuter Quadlock Birdcage PlateInner Quadlock Birdcage PlateShock MountOptional double shear HD shock mountTorsion Roller AssemblySlotted washer for roller bolt (2 required)1/2”C X 4 3/4” Bolt (bolts birdcage plates together)1/2”C X 5” Bolt (roller)1/2”C Nylock Nuts (used on 4 3/4” long bolts)5/8”C X 3” Bolt (bolts radius rod to outer plate)5/8”C Nylock Nut (used on 3” long radius rod bolt)1/2”C Narrow Nylock Nut (used on 5” long roller bolt)

BRP 9032BRP 698

BRP 9030LBRP 9031LBRP 4278LBRP 9079

RED P/NDESCRIPTIONQTY

21111112212111

BRP 9032BKBRP 698BK

BRP 9030LBKBRP 9031LBKBRP 4278LBKBRP 9079BK

BRP 9284BRP 4250W

BOL 084751CBOL 085001C

BOL 082CBOL 103001C

BOL 102CBOL 083C

BLACK P/N

BRP 724

please see page 56 for clamp on brake brackets to complete this birdcage

BRP 4292 8 Bolt Left Rear BirdcageComplete Left Rear 8 Bolt Birdcage KitBrake caliper bracket for 12.16” diameter rotor X .810” thick1 7/8“ Aluminum Birdcage Spacer2 1/4” Aluminum Birdcage Spacer3/8” Thick Aluminum Spacer for Caliper Bracket1/4” Steel Radius Rod SpacerOuter Birdcage PlateInner Birdcage PlateInner Birdcage Plate StrapShock MountOptional double shear HD shock mountTorsion Roller AssemblySlotted Washer for roller bolt (2 required)8 Bolt Cup1/2”C X 5 1/2” Bolt1/2”C X 5” Bolt1/2”C X 4 1/2” Bolt1/2”C X 2 3/4” Bolt5/8”C X 3” Bolt5/8”C Nylock Nut1/2”C Nylock Nut1/2”C Narrow Nylock Nut

BRP 9284BRP 4250W

BOL 085501CBOL 085001CBOL 084501CBOL 082751CBOL 103001C

BOL 102CBOL 082CBOL 083C

DESCRIPTIONQTY

121211111111112111123

BRP 4292BRP 1-2BRP 697BRP 698BRP 716

BRP 4270LBRP 4274BRP 4276

BRP 4278LBRP 9079

BRP 4308

BRP 4292BKBRP 1-2BKBRP 697BKBRP 698BKBRP 716BK

BRP 4270LBKBRP 4274BKBRP 4276BK

BRP 4278LBKBRP 9079BK

BRP 4308BK

BRP 724

Did You Know...Quadlock Birdcages offer the ultimate

in strength. They require Quadlock tubes towork properly- see page 36 for tubes

Did You Know...8 Bolt birdcages offer great strength. They will

fit BRP chassis, Teo and Troyer chassisas well. RED P/N BLACK P/N

Complete Left Rear Large Bearing Clamp On Birdcage KitBrake Caliper Bracket2 1/4” Aluminum Birdcage Spacer1/4” Steel Radius Rod Spacer1“ Aluminum Birdcage SpacerOuter Clamp On Birdcage PlateInner Clamp On Birdcage PlateShock MountOptional double shear HD shock mountTorsion Roller AssemblySlotted washer for roller bolt (2 required)1/2”C X 6 1/2” Bolt (bolts birdcage plates together)1/2”C X 5” Bolt (roller)1/2”C Nylock Nuts (used on 6 1/2” long bolts)5/8”C X 3” Bolt (bolts radius rod to outer plate)5/8”C Nylock Nut (used on 3” long radius rod bolt)1/2”C Narrow Nylock Nut (used on 5” long roller bolt)

BRP 9284BRP 4250W

BOL 086501CBOL 085001C

BOL 082CBOL 103001C

BOL 102CBOL 083C

DESCRIPTIONQTY

1212111112212111

RED P/N BLACK P/NBRP 4255

BRP 2BRP 698

BRP 726BRP 4250LBRP 4252LBRP 4278LBRP 9079

BRP 4255BKBRP 2BK

BRP 698BK

BRP 726BKBRP 4250LBKBRP 4252LBKBRP 4278LBKBRP 9079BK

BRP 724


N.E. MODIFIED REAR SUSPENSIONRIGHT REAR BIRDCAGES

Did You Know...BRP 4255/4257 birdcages need to be pinnedto the rear end tube. Drill 7/16” into the tube

and use the supplied pin.

BRP 9033 Right Rear QuadLock Birdcage

BRP 4257 Right Rear Large Bearing BirdcageComplete Left Rear Large Bearing Clamp On Birdcage KitBrake Caliper Bracket2 1/4” Aluminum Birdcage Spacer1/4” Steel Radius Rod Spacer1“ Aluminum Birdcage SpacerOuter Clamp On Birdcage PlateInner Clamp On Birdcage PlateShock MountOptional double shear HD shock mountTorsion Roller AssemblySlotted washer for roller bolt (2 required)1/2”C X 6 1/2” Bolt (bolts birdcage plates together)1/2”C X 5” Bolt (roller)1/2”C Nylock Nuts (used on 6 1/2” long bolts)5/8”C X 3” Bolt (bolts radius rod to outer plate)5/8”C Nylock Nut (used on 3” long radius rod bolt)1/2”C Narrow Nylock Nut (used on 5” long roller bolt)

BRP 4257BRP 2

BRP 698

BRP 726BRP 4250RBRP 4252RBRP 4278RBRP 9080

DESCRIPTIONQTY

1212111112212111

RED P/N BLACK P/N

BRP 9284BRP 4250W

BOL 086501CBOL 085001C

BOL 082CBOL 103001C

BOL 102CBOL 083C

BRP 4257BKBRP 2BK

BRP 698BK

BRP 726BKBRP 4250RBKBRP 4252RBKBRP 4278RBKBRP 9080BK

BRP 724

please see page 56 for clamp on brake brackets to complete this birdcage

BRP 4293 8 Bolt Right Rear BirdcageComplete Left Rear 8 Bolt Birdcage KitBrake caliper bracket for 12.16” diameter rotor X .810” thick1 7/8” Aluminum Birdcage Spacer2 1/4” Aluminum Birdcage Spacer3/8” Aluminum Caliper Bracket Spacer1/4” Steel Radius Rod SpacerOuter Birdcage PlateInner Birdcage PlateInner Birdcage Plate StrapShock MountOptional double shear HD shock mount8 Bolt CupTorsion Roller AssemblySlotted Washer for roller bolt (2 required)1/2”C X 5 1/2” Bolt1/2”C X 5” Bolt1/2”C X 4 1/2” Bolt1/2”C X 2 3/4” Bolt5/8”C X 3” Bolt5/8”C Nylock Nut1/2”C Nylock Nut1/2”C Narrow Nylock Nut


BRP 4270RBRP 4272BRP 4276BRP 4278BRP 9080BRP 4308

DESCRIPTIONQTY

121211111111221111123

RED P/N BLACK P/N

BRP 9284BRP 4250W

BOL 085501CBOL 085001CBOL 084501CBOL 082751CBOL 103001C

BOL 102CBOL 082CBOL 083C

BRP 4293BKBRP 1-2BKBRP 697BKBRP 698BKBRP 716BK

BRP 4270RBKBRP 4272BKBRP 4276BKBRP 4278BKBRP 9080BKBRP 4308BK

Did You Know...Quadlock birdcages have flats on 4 sides-

no need to drill the tube and they slide rightinto place!

Did You Know...Different brake brackets are available

for 8 bolt birdcages- see page 63for different options...

Complete Left Rear QuadLock Birdcage Kit2 1/4” Aluminum Birdcage Spacer1/4” Steel Radius Rod SpacerOuter Quadlock Birdcage PlateInner Quadlock Birdcage PlateShock MountOptional double shear HD shock mountTorsion Roller AssemblySlotted washer for roller bolt (2 required)1/2”C X 4 3/4” Bolt (bolts birdcage plates together)1/2”C X 5” Bolt (roller)1/2”C Nylock Nuts (used on 4 3/4” long bolts)5/8”C X 3” Bolt (bolts radius rod to outer plate)5/8”C Nylock Nut (used on 3” long radius rod bolt)1/2”C Narrow Nylock Nut (used on 5” long roller bolt)

BRP 9284BRP 4250W

BOL 084751CBOL 085001C

BOL 082CBOL 103001C

BOL 102CBOL 083C

DESCRIPTIONQTY

21111112212111

RED P/N BLACK P/NBRP 9033BRP 698

BRP 9030RBRP 9031RBRP 4278RBRP 9080

BRP 9033BKBRP 698BK

BRP 9030RBKBRP 9031RBKBRP 4278RBKBRP 9080BK

BRP 724

BRP 724


N.E. MODIFIED REAR SUSPENSION

COIL-OVER TRAILING ARM BRACKETS

Left Rear Coil Over Birdcage8 Bolt Rear End

Complete Left Rear 8 Bolt Coil Over Birdcage8 Bolt Trailing Arm BracketBrake Caliper Bracket (.810” X 12.16 dia. rotor)Steel 4 Bolt to 8 Bolt adaptor plateCaliper Bracket SpacerTrailing Arm to BRP 4311S spacer7/16”C X 1 1/2” Bolt7/16“ Flatwasher7/16”C Nylock Nut1/2”C X 2 1/2” Bolt1/2”C Nylock NutTrailing Arm Stud

BRP 4560-0BRP 540BRP 1-2BRP 4311SBRP 713BRP 4555BOL 071501CBOL 07FLATBOL 072CBOL 082501CBOL 082CBOL 083006F

P/NDESCRIPTIONQTY

11121222331

Right Rear Coil Over Birdcage8 Bolt Rear End

Complete Right Rear 8 Bolt Coil Over Birdcage8 Bolt Trailing Arm BracketBrake Caliper Bracket (.810” X 12.16 dia. rotor)Steel 4 Bolt to 8 Bolt adaptor plateCaliper Bracket SpacerCaliper Bracket to Trailing Arm SpacerTrailing Arm to BRP 4311S spacer7/16”C X 1 1/2” Bolt7/16“ Flatwasher7/16”C Nylock Nut1/2”C X 3 3/4” Bolt1/2”C Nylock NutTrailing Arm StudComplete Right Rear 8 Bolt Coil Over BirdcageFor Large Offset Right Rear Wheel

BRP 4561-0BRP 540BRP 1-2BRP 4311SBRP 713BRP 4556BRP 4557BOL 071501CBOL 07FLATBOL 072CBOL 083751CBOL 082CBOL 083006F

BRP 4561-3

P/NDESCRIPTIONQTY

111221222331

BRP 4560-0 BRP 4561-0

Did You Know...The 8 Bolt Coil-Over birdcages

are most popular on Asphalt cars....

TRAILING ARM BRACKETS AND ACCESSORIES

8 Bolt Aluminum Trailing Arm Bracket Only (short for tire clearance)8 Bolt Aluminum Trailing Arm Bracket Only (standard length)Bolt On Trailing Arm Bracket for 3” Tube - 1/2” Radius Rod HolesBolt On Trailing Arm Bracket for 3” Tube - 5/8” Radius Rod HolesBolt On Trailing Arm Bracket for 3” Tube - 3/4” Radius Rod HolesQuad Lock Trailing Arm Bracket - 5/8” Radius Rod HolesReplacement Trailing Arm Stud

BRP 529BRP 540BRP 541BRP 542BRP 543BRP 9063BOL 083006F

P/NDESCRIPTION

BRP 540

BRP 529

BRP 541 BRP 9063

4 Hole steel weld on flangeLower control arm bracketHalf moon spacerLower shock mount

BRP 1602BRP 1565BRP 1566BRP 1567

P/NDESCRIPTIONAccessories

Trailing Arm Brackets

8 BOLT BIRDCAGE CUPS

1 3/8” Deep 8 bolt birdcage cup - 8 holes, 22 1/2° angle1 3/8” Deep birdcage cup - NO HOLES1 3/8” Deep 8 bolt birdcage cup - 8 holes, LR corrected birdcage timing to 0°1 3/8” Deep 8 bolt birdcage cup - 8 holes, RR corrected birdcage timing to 0°1 3/4” Deep 8 bolt birdcage cup - 8 holes drilled at zero1 3/4” Deep birdcage cup - NO HOLES1 3/4” Deep birdcage cup - 16 holes1 3/4” Deep birdcage cup - 8 holes drilled, 22 1/2° angle

BRP 4308BRP 4308BBRP 4308LBRP 4308RBRP 4312BRP 4312BPBRP 4312-1BRP 4313

P/NDESCRIPTION

BRP 1565BRP 1602 BRP 1566 BRP 1567

BRP 4308 BRP 4308B

BRP 4312-1 BRP 4313BRP 4312BP

BRP 4308L



REAR RADIUS ROD SHORTENING KITS

Left Rear Radius Rod Shortening Kit (Uses 2” Shorter Radius Rod)Right Rear Radius Rod Shortening Kit (Uses 2” Shorter Radius Rod)

BRP 9099LBRP 9099R

P/NDESCRIPTION

Comes with all necessary hardware - bolts to all 2000 to present midrail chassisBRP 9099L

3/4” Rod End assembly with 650 pound spring3/4” Rod End assembly with 900 pound spring3/4” Rod End assembly - no spring

5/8” Rod End assembly with 650 pound spring5/8” Rod End assembly with 900 pound spring5/8” Rod End assembly - no spring

BRP 1398-650BRP 1398-900

BRP 1398

BRP 1399-650BRP 1399-900

BRP 1399

RED P/NDESCRIPTION BLACK P/NBRP 1398-650BKBRP 1398-900BK

BRP 1398BK

BRP 1399-650BKBRP 1399-900BK

BRP 1399BK

BRP SPRING RODS

BRP 1399-900BK

Spring Rod Replacement Parts

BodySlider HousingSlider RodRod EndSteel Adjuster NutSlider WasherAdjuster Washer

5/8”F Radius Rod Connecting Stud


BRP 1396S

5/8” REDDESCRIPTION 3/4” REDBRP 1397BRP 1395BRP 1394BRP 1392BRP 1390BRP 1388BRP 1388

-NA-

3/4” BLACK 5/8” BLACKBRP 1397BKBRP 1395BKBRP 1394BK

BRP 1392BRP 1390


-NA-

BRP 1396BKBRP 1395BKBRP 1393BK

BRP 1391BRP 1389


BRP 1396S

BRP 1394

BRP 1395 BRP 1392

BRP 1397

BRP 1396S

BRP 1396

BRP 1390BRP 1388

SPRING ROD RADIUS RODS

5/8”F Thread X 15 1/2” Long Radius Rod5/8”F Thread X 16” Long Radius Rod5/8”F Thread X 17” Long Radius Rod5/8”F Thread X 17 1/2” Long Radius Rod5/8”F Thread X 18” Long Radius Rod5/8”F Thread X 19” Long Radius Rod

3/4”F Thread X 18” Long Radius Rod

BRP 1385-151/2BRP 1385-16BRP 1385-17BRP 1385-171/2BRP 1385-18BRP 1385-19

BRP 1386-18

RED P/NDESCRIPTIONBRP 1385-151/2BKBRP 1385-16BK

BRP 1385-171/2BKBRP 1385-18BK

BLACK P/N

Did You Know...These Radius Rods are tapered where they thread on the spring rod, so there

is less flex- making it stronger!

BRP 1385-18

Replacement 4 1/2” Mini Springs - 1 1/8” I.D. X 1 7/8” O.D.

4 1/2” X 650#4 1/2” X 900#4 1/2” X 1050#

AFC 27065AFC 27090AFC 27105

P/NDESCRIPTION4 1/2” X 1200#4 1/2” X 1600#4 1/2” X 2000#

AFC 27120AFC 27160AFC 27200

P/NDESCRIPTION

Complete Spring Rod with Radius Rod (includes Rod End)

Complete 650# Spring Rod with 17 1/2” Radius RodComplete 900# Spring Rod with 17 1/2” Radius RodComplete 900# Spring Rod with 18” Radius Rod

BRP 1399-650-171/2BRP 1399-900-171/2BRP 1399-900-18


BRP 1399-900-171/2BKBRP 1399-900-18BK

REAR RADIUS RODS

LR Radius RodLR Radius Rod With 0° birdcage timingLR Radius Rod With BRP 9099L Shortening KitNo Spring Rod - RR Radius RodNo Spring Rod - RR Radius Rod With 0° birdcage timingNo Spring Rod - RR Radius Rod With BRP 9099R Shortening Kit

BRP RR 27BRP RR271/2BRP RR 25BRP RR 271/2BRP RR28BRP RR 251/2

RED P/NDESCRIPTIONBRP RR27BKBRP RR271/2BKBRP RR 25BKBRP RR 271/2BKBRP RR28BKBRP RR 251/2BK

BLACK P/N

SEE PAGE 12 FOR ADDITIONAL RADIUS ROD LENGTHS

*note - all 5/8” spring rods come with BRP 1399W(red) or 1399WBK(black) wrench& all 3/4” spring rods come with BRP 1398W(red) or 1398WBK (black)BRP 1399WBK



REAR INNER PANHARD MOUNTS

Aluminum Inner Panhard mount (includes bolts and spacers)- uses BRP 442 bolt kit sold seperatelyHeavy Duty Steel Inner Panhard mount - uses BRP 443 Bolt KitInner Support for BRP 1624 panhard mount (bolts to 1/2” through boltof mount to pinion seal cover plate) RECOMMENDED FOR BRP 16241 7/8” Long Quick Pin For BRP 1624 (replaces bolt)1 3/4” Long Quick Pin For BRP 1626 (replaces bolt)Bolt Kit for BRP 1624 Aluminum Panhard Mount Bolt Kit For BRP 1626 Steel Panhard Mount

BRP 1624BRP 1626

BRP 1625BRP 9370BRP 9369CBRP 442BRP 443

P/NDESCRIPTION

BRP 1625

BRP 1624

PRECISION CONTROL LINK

SPRING ROD WRENCHES

3/4” Spring Rod Wrench5/8” Spring Rod Wrench

BRP 1398WBRP 1399W


BRP 1399WBKBRP 1398W

BRP 1626BRP 9369C

Precision Control Link Complete With Spring (radius rod sold separately) BRP 9407P/NDESCRIPTION

Replacement PartsReplacement Precision Control Link BodyReplacement Precision Control Link CapReplacement Precision Control Link Guide BushingReplacement Precision Control Link ShaftReplacement Inner Rod SealReplacement Inner Wiper SealReplacement Outer Rod Guide Bushing Seal (2 required)Replacement Travel Indicator O-RingReplacement Rod Guide Bushing Retaining RingReplacement Body / Cap O-Ring SealReplacement Radius Rod Connector StudReplacement Adjuster Rod EndReplacement Adjuster WasherReplacement Steel Adjuster NutReplacement Jam NutReplacement SpringReplacement Rock Gaurd

BRP 9407ABRP 9407BBRP 9407CBRP 9407DNIA 114BOL ST-62NIA 209NIA 208BOL 91985A161NIA 032BRP 1396SBRP 1391BRP 1387BKBRP 1389BRP 787AFC 27065BRP 9409

P/NDESCRIPTION

DRIVESHAFT COVERS

Driveshaft Cover for BER MOZ/ WIN 60150 TransmissionsDriveshaft Cover BER 1200 TransmissionDriveshaft Cover For BER MOZ/WIN 60150 with 2” Engine Back

BRP 1645BRP 9020BRP 1643

P/NDESCRIPTION

BRP 1645BRP 9020

BRP 9407

BRP 9408-11.000

Precision Control Link Radius Rods

Precision Control Link Radius Rod - 11.000” Long (2“ Short Rod)Precision Control Link Radius Rod - 13.000” Long (STD Cars)

BRP 9408-11.000BRP 9408-13.000

P/NDESCRIPTION

3 - 7/16”F X 6 1/2” Bolt3 - 7/16”F Nylock Nut2 - 7/16”C X 2 1/2” Stud2 - 7/16”C Nylock Nuts

BRP 442 BRP 4431 - 7/16”C X 3” Stud1 - 7/16C X 2 1/2” Stud1 - 7/16”F X 6 1/2” Bolt3 - 7/16”F X 7” Bolt

3 - 7/16”F Nylock Nuts2 - 7/16”C NylockNuts2 - 3/8”C X 1 3/4” Bolt


N.E. MODIFIED REAR SUSPENSIONNON ADJUSTABLE REAR OUTER PANHARD MOUNTS

Rear Panhard Mount Assembly (includes all hardware)Rear aluminum panhard plate only (no numbers)Front aluminum panhard plate only (with laser etched numbers)2000-present X chassis bolt kit

BRP 4551BRP 4550

BRP 4550A

RED P/NDESCRIPTIONBRP 4551BKBRP 4550BK

BRP 4550ABK

BLACK P/N

BRP 4550BBRP 4551

Non- Adjustable

Standard Panhard Mount

Rear Panhard Mount Assembly (includes all hardware)Rear aluminum panhard plate only (no numbers)Front aluminum panhard plate only (with laser etched numbers)2000-present X chassis bolt kit

BRP 9076BRP 9076ABRP 9076B

RED P/NDESCRIPTION BLACK P/NBRP 9076BKBRP 9076ABKBRP 9076BBK

BRP 4550B

1” Shorter Panhard Mount

BRP 4549Cockpit adjustable

BRP 4548Non Cockpit Adjustable

BRP 4552Outer Panhard support brace- supports panhard bracket to chassis BRP 4552

P/NDESCRIPTIONOuter Panhard Support

Cockpit Adjustable Rear Outer Panhard Mount AssemblyNon Cockpit Adjustable Rear Outer Panhard Mount AssemblyFront aluminum plate with laser etched numbersRear aluminum plateUpper threaded center spacer blockLower Solid center spacer blockRod End slider block7/8”C theaded adjuster rod90 degree Swivel gear drive (BRP 4549 only)Cockpit adjuster shaft knob (BRP 4549 only)Cockpit adjuster shaft (BRP 4549 only)3/8” detent ballBolt Kit for BRP 4548/45493“ X 1/2” Shoulder bolt for rod end slider blockTaper head bolt for Panhard support

BRP 4547BRP 509009BRP 4549B

BOL 083005CBOL 081253F

RED P/NDESCRIPTION BLACK P/NBRP 4549BRP 4548BRP 4540BRP 4541BRP 4542BRP 4543BRP 4544BRP 4545BRP 4546

BRP 4549BKBRP 4548BKBRP 4540BKBRP 4541BKBRP 4542BKBRP 4543BKBRP 4544BK

BRP 4545BRP 4546BRP STE8

ADJUSTABLE REAR OUTER PANHARD MOUNTS

Did You Know...The angle of the panhard bar has a large effect on

the race car. Generally, the lower the outboard side is,the tighter the car will be. The higher the outboard side, the

looser the car will be.

REAR PANHARD BARS

Rubber Rear Panhard Mount (complete with radius rod and rod end) BRP 9120RED P/NDESCRIPTION BLACK P/N

BRP 9120BK

BRP 9120

Complete Main Body (includes bearing, snap ring and bronze bushing)Incomplete Main Body Bare (no bearing, no snap ring or bronze bushing)Replacement Radius RodAluminum Cup WasherSteel WasherRubber Slider Bar1” I.D.Steel Washer1” I.D. Steel Cup WasherBronze BushingReplacement Snap RingReplacement Com Bearing

BRP 9121BRP 9121iBRP 1065BRP 9124

RED P/NDESCRIPTION BLACK P/NBRP 9121BKBRP 9121iBKBRP 1065BKBRP 9124BK

BRP 9122BRP 9123BRP 9126BRP 9127BRP 9128BOL 1300-100BRE COM8

Also uses BRE 5081L rod end, BRP 786 and BRP 787 jam nuts

Standard Rear Panhard Bar BRP 1145RED P/NDESCRIPTION

BRP 1145BKBLACK P/N

SEE PAGE 12 FOR ADDITIONAL PANHARD BAR LENGTHS

Rubber Panhard Bar

Rubber Panhard Bar Replacement Parts

Solid Panhard Bar

BRP 1145

BRP 4550B4- BRP 4821- BRP 7191- BRP 720

1- 1/2”F X 2 1/4” Bolt2- 1/2”C X 1 1/4” Bolt4- 1/2”C X 4 1/2” Bolt2- 1/2”C X 5 1/2” Bolt

1- 1/2”F X 1 1/4” Flat Head1- 1/2”F Nylock Nut4- 1/2”C Nylock Nut

4- 1/2”C Narrow Nylock1- 1/2” Lockwasher

BRP 4549B2- 1/2”C X 1 1/4” Bolt2- 1/2”C X 5 1/2” Bolt

4- 1/2”C Narrow Nylock2- BRP 482

1- 1/2”F X 2 1/4” Bolt1- 1/2” Lockwasher1- 1/2”C Nylock Nut

1- 1/2”C X 3 1/2” Bolt


N.E. MODIFIED REAR SUSPENSIONRUBBER FLOOR TORQUE ARM SLIDERS AND HARDWARE

Aluminum Torque Arm Slider For Rubber Floor Cars - 6 1/4” center to centerSteel Torque Arm Slider For Rubber Floor Cars - 6 1/4“ center to centerReplacement Inner Aluminum Sleeve with O-Rings (2 required)Replacement Inner Sleeve End Cap - 4 requiredInner Aluminum Cup - PLAIN (sold in pairs with snap ring)3/4” Steel Slider Rod (has 4 flats - 12 1/4“ long) - 2 required3/4” Aluminum Lock Collar - 4 requiredRubber Biscuit Assembly (complete with bolt, black rubbers, & rod end)Rubber Biscuit Assembly (complete with bolt, blue rubbers, & rod end)Rod End Only (2 1/4“ from center of heim to end of threads)Rubber Bushing Kit (comes with 2 washers, 2 black rubbers, and 1 sleeve)Black Rubber Bushing Only ( 70 durometer) - 1 3/8” highBlue Rubber Bushing Only (60 durometer) - 1 3/8” highRed Rubber Bushing Only (50 durometer) - 1 3/8” highShortened Blue Rubber Bushing Only (60 Durometer) - 1 1/8“ highSteel Washer OnlySteel Inner Sleeve (2 1/2” long)Replacement Inner Bolt (bolt goes through center of slider - 5/8”F X 4”) 5/8” Front Slider Shaft ( includes BRP 181A locking collar)

BRP 417BRP 417SBRP 417-2BRP 417-3BRP 417-7BRP 9115BRP 181-1ABRP 424BRP 424BLBRP 425BRP 427BRP 427-1BRP 427-5BRP 427-2BRP 427-6BRP 427-3BRP 427-4BOL 104001FBRP 419

P/NDESCRIPTION

BRP 417

BRP 417S

VER 2 RUBBER FLOOR COMPONENTS

Complete Generation II Rubber Floor Assembly(comes with front and rear cross assemblies and rubber bushings)Generation II Front Cross Brace (comes with rubber bushings)Generation II Rear Cross Brace (comes with rubber bushings)Replacement Rubber Bushing For Floor - 4 required (sold each)Replacement Solid Bushings to Replace Rubber Bushings - 4 requiredReplacement Generation II Cross Link - requires 2 heim endsReplacement Left Hand Heim End - 1 requiredReplacement Right Hand Heim End - 1 requiredReplacement Jam Nut for BRP 727- 1 requiredLeft Side Foot Pad For Ver 2 Rubber FloorRight Side Foot Pad For Ver 2 Rubber Floor

MFG CHA185MFG CHA185-1MFG CHA185-2BRP 2208GMFG CHA221BRP 727BRE 1081LBRE 1081RBRP 784BRB 2937LBRB 2937R

P/NDESCRIPTION

BRP 417-2

MFG CHA185-1

MFG CHA185-2

BRP 2208G

MFG CHA221

VER 3 RUBBER FLOOR COMPONENTS

NOTE: BRP 417 & BRP 417S can be used in either VERSION 2 and VERSION 3 rubber floors. They can also be used in standard floors with 6 1/4” slider rod spacing.

WasherBRP 427-3

Slider Rod EndBRP 425

BRP 427BRP 424BLInner SleeveBRP 427-4

BRP 427-1Hard

BRP 427-5Medium

BRP 427-2Soft

BRP 427-61 1/8” Medium

BRP 427-73/4” Medium


Ver 2 & Ver 3 Rubber Floor Slider Rods - 12 1/4” Long

BRP 417-7

Ver 3 Rubber Floor AssemblyReplacement Rubber Bushing For Floor (4 required)Replacement Solid Bushing For Floor - 4 required (sold each)Left Side Foot Pad For Ver 3 Rubber FloorRight Side Foor Pad For Ver 3 Rubber Floor

MFG CHA99HV3BRP 2208GMFG CHA221BRB 15-37LBRB 15-37R

P/NDESCRIPTION

BRP 2208G

MFG CHA221

MFG CHA99HV3



TORSION STOPS

Aluminum Straight Torsion StopAluminum Curved Torsion Stop - Red AnodizedAluminum Curved Torsion Stop - Black AnodizedSteel Straight Torsion StopSteel Curved Torsion StopReplacement Adjuster Bolt for BRP 261,263,260 & 262(7/16F X 2 1/2” Long)Lightweight Sprint Car Torsion StopReplacement Adjuster Bolt For BRP 4508 (7/16”F X 2” Long)

BRP 261BRP 263BRP 263BKBRP 260BRP 262BRP 259BRP 4508BRP 259-2

P/NDESCRIPTION

TORSION BEARINGS & BUSHINGS

BRP 1534BRP 264 BRP 1535BRP 1533

BRP 4508BRP 262

BRP 263BRP 261

Nylon 1 1/8” I.D. for 1 1/2“ X .120 wall (1.260” bore)Brass 1 1/8” I.D. for 1 1/2“ X .120 wall (1.260” bore)Nylon 1 1/8” I.D. for 1 1/2” X .095” wall (1.310“ bore)Nylon 1” I.D. for 1 3/8” X .095 wall (1.185“ bore)Torsion Roller Bearing 1 1/8” I.D.Torsion Bearing Snap RingTorsion Bearing SpacerSpherical Non-Binding Torsion BearingRubber Torsion Bearing Boot Protector

BRP 264BRP 264BBRP 265BRP 278BRP 1533BRP 1534BRP 1535BRP 9297BRP 9327

P/NDESCRIPTION

BRP 263BK

BRP 9297 BRP 9327

Did You Know...These parts will fit all 2000 to present

standard NON rubber floor Bicknell Chassis.

STANDARD FLOOR TORQUE ARM SLIDERS AND HARDWARE

3/4” STD FLOOR Steel Slider Rod (has 1 flat - 11 7/8“ long) - 2 Required3/4” Aluminum Lock Collar - 2 requiredRubber Biscuit Assembly (complete with bolt, black rubbers & rod end)Rubber Biscuit Assembly (complete with bolt, blue rubbers, & rod end)Rod End Only (2 1/4“ from center of heim to end of threads)Rubber Bushing Kit (comes with 2 washers, 2 black rubbers and 1 sleeve)Black Rubber Bushing Only - 70 Durometer (sold each) 1 3/8” highBlue Rubber Bushing Only - 60 Durometer (sold each) 1 3/8” highRed Rubber Bushing Only - 50 Durometer (sold each) 1 3/8” highShortened Blue Rubber Bushing Only - 60 Durometer (sold each) 1 1/8” highShortened Blue Rubber Bushing Only - 60 Durometer (sold each) 3/4” high`Shortened Blue Rubber Bushing Only - 60 Durometer (sold each) 1/2” highSteel Washers OnlySteel Inner Sleeve (2.50” long)Stainless Steel Front Slider Shaft (includes BRP 181A locking collar)Midrail Aluminum Slider Plate - 4 1/4” center to centerReplacement Center Bolt (5/8”F X 4” Bolt)

BRP 421BRP 181ABRP 424BRP 424BLBRP 425BRP 427BRP 427-1BRP 427-5BRP 427-2BRP 427-6BRP 427-7BRP 427-8BRP 427-3BRP 427-4BRP 419BRP 418BOL 104001F8

P/NDESCRIPTION

Standard Floor Slider Rod BRP 421 - 11 7/8” long

WasherBRP 427-3

Slider Rod EndBRP 425

BRP 427

BRP 424BL

Front Slider ShaftBRP 419

Inner SleeveBRP 427-4

Aluminum Slider Plate BRP 418

BRP 427-1Stiff

BRP 427-5Medium

BRP 427-2Soft

BRP 427-61 1/8” Medium



TRIPLE BISCUIT PICKUP

Complete Triple Biscuit Pickup AssemblyReplacement Bottom Biscuit - Red (1 required)Replacement Steel Washer (2 required)Replacement Top Middle Biscuit (1 required)Replacement Top Biscuit (1 required)Replacement Aluminum Cup Washers (3 required)Replacement Inner Sleeve (3” Long 1 required)Replacement Rod End (1 required) 1 7/8” longReplacement Center Bolt (1 required) 5/8”F X 4 1/2” long

BRP 9425BRP 427-2BRP 427-3BRP 427-7BRP 427-8BRP 9101BRP 9103BRP 9104BOL 104501F8

P/NDESCRIPTION

NOTE: BRP 418 Slider can only be used in STD floors with 4 1/4” slider rod spacing

BRP 9425



TORSION ARMS

Replacement Convex Roller Plate (includes tapered bolts)Replacement Tapered Bolts for Roller PlateSafety Bolt (Keeps torsion arm in place in case of radius rod breakage)

BRP 9078BOL 040753CBRP 4403

P/NDESCRIPTION

BRP 231-24

BRP 4402

BRP 4403

BRP 9078

BRP 4400-2

BRP 4400-1

BRP 9141 Replacement Torsion Arm Parts

1” X 2” Blank Arm 24” Long (Plain Aluminum Only)Left Rear Roller Torsion Arm - 20” LongRight Rear Roller Torsion Arm - 19” LongRight Rear Roller Torsion Arm - 19” Long with 1” Offset Right Rear Roller Torsion Arm - 19” Long with 2” Offset Severe Duty Left Side Torsion Arm with Convex PlateSevere Duty Right Side Torsion Arm with Convex PlateLeft Rear Roller Torsion Arm - 20” Long with 1” Offset Left Rear Roller Torsion Arm - 20” Long with 2” Offset

BRP 4400BRP 4402BRP 4400-1BRP 4400-2BRP 9141BRP 9142BRP 4400-1RBRP 4400-2R




BRP 231-24

Ultra HD Left Rear Torsion Arm - Machined from special aircraft materialUltra HD Right Rear Torsion Arm - Machined from special aircraft material

BRP 9360BRP 9361

P/NDESCRIPTION

Ultra Heavy Duty Torsion Arms

BRP 9360

TORSION BARS AND TORSION RACKS

Did You Know...The first cars to utilize a torsion bar suspension were

designed by a Czechoslovakian Professor by the nameof Hans Ledwinka in the Mid 1930’s.

0.875”0.900”0.925”0.950”0.975”1.000”1.025”1.050”

WIN 6362-875WIN 6362-900WIN 6362-925WIN 6362-950WIN 6362-975

WIN 6362-1000WIN 6362-1025WIN 6362-1050

29” BRP ENERGY BARSSIZE 29” SCHROEDER 29” WINTERSSHR 29SD875SHR 29SD900SHR 29SD925SHR 29SD950SHR 29SD975

SHR 29SD1000

BRP 29-900BRP 29-925BRP 29-950BRP 29-975

BRP 29-1000 SHR 30GD1000SHR 30GD1025SHR 30GD1050

30” SCHROEDER

BRP ENERGY TORSION BARS

Torsion RacksStandard Torsion Rack - 40 1/8” Wide With 2” Spread Between Tube CentersSplit 2 Bearing Rack - 40 1/8” Wide With 3” Spread Between Tube CentersSplit 4 Bearing Rack - 40 1/8” Wide With 3” Spread Between Tube Centers

BRP 269B-6BRP 269B-7BRP 269B-8

P/NDESCRIPTION

BRP 269B-8

TORSION BAR CHECKER

Torsion Bar Checker Tool BRP 9242P/NDESCRIPTION

**NOTE- Does not include scale pad**

BRP 9242

No Roller Plate Needed


N.E. MODIFIED REAR SUSPENSIONADJUSTABLE TORQUE ARM KITSDid You Know...

These torque arm kits come with all the hardware and safety loops- rear end through

bolts are also required.

Adjustable Torque Arm Kit for 10” Rear Ends (fits Winters, DMI, Tiger)Adjustable Torque Arm Kit for V8 Rear EndsAdjustable Torque Arm Kit for Non-Quick Change Rear Ends

BRP 9018BRP 9019BRP 9090

P/NDESCRIPTION

TORQUE ARM PLATES

Rear Common Plate for Standard 10” Rear Ends (used in BRP 9018)Rear Common Plate for V8 Rear Ends (used in BRP 9019)Rear Common Plate for Non Quick Change Rear End (used in BRP 9090)Right Front Adjuster Plate (used on BRP 9018 / 9019 / 9090)Left Front Adjuster Plate (used on BRP 9018 / 9019 / 9090)Front Driveshaft Loop for (BRP 9018 / BRP 9019 ONLY) see below for othersRear Driveshaft Loop (BRP 9018 / BRP 9019 ONLY) see below for othersTie Rod adjuster Link - 3/4“ aluminum hex with 1/2”F tapped endsSpecial machined 1/2” Shoulder Bolt (2 per side top and bottom)Rear Tie Rod Spacer (short spacer) 1 required per side (red aluminum)Front Tie Rod Spacer (long spacer) 1 required per side (red aluminum)5/8” Front Cross ShaftCross Shaft Lock Collars - 1 required per sideCross Shaft Locating Collars (locates shaft in counterbore) - 1 required per side1/2”F Male Left Hand Rod End for Tie Rod1/2”F Male Right Hand Rod End for Tie RodRear Common Plate for V-8 Rear EndsReplacement Front Spacer Bolt - 1/2”C X 7” long hex boltReplacement Rear Spacer Bolt - 1/2”C X 6 1/2” long hex bolt

BRP 9006BRP 9015BRP 9085BRP 9007BRP 9008BRP 9009BRP 9010BRP 9011BRP 9012BRP 9013BRP 9014BRP 9017BRP 181-1ABRP 765BRE 1081LBRP 1081RBRP 9015BOL 087001CBOL 086501C

P/NDESCRIPTION

Complete Adjustable Kits

Replacement Parts

BRP 9018

Standard Quick Change RearStandard Quick Change RearNon Quick Change RearStandard Quick Change RearEngine Back Quick Change RearV-8 Quick Change RearV-8 Quick Change Rear


P/NDESCRIPTION PINIONANGLELENGTH # OF

FRONT HOLES0°0°0°

-3°-3°0°

-3°

26 1/2” - 32 1/2”26 1/2” - 28”

26 1/2” - 32 1/2”28” - 32 1/2”

28“ - 31”26 1/2” - 32”26 1/2” - 32”

5 Holes2 Holes5 Holes4 Holes3 Holes5 Holes5 Holes

Mid RailDowntubeMid RailMid RailMid RailMid RailMid Rail

APPLICATION

BRP 426

BRP 428

BRP 430

BRP 432

BRP 433

BRP 439

Did You Know...BRP 432 are the most common torque arms.

They have a -3 degree pinion angle. Use BRP 426 for 0 degree torque arms.

Did You Know...BRP 430 torque arms are used

for non-quick change rear ends only. They have a 0 degree pinion angle.

Torque Arm Bolt KitsTorque Arm Bolt Kit for BRP 1624 Aluminum Panhard MountTorque Arm Bolt Kit for BRP 1626 Steel Panhard MountTorque Arm Support Spacer (Use Bolt # BOL 087001C)USED FOR BRP 1624 Aluminum Mount Only (not required for steel BRP 1626)

BRP 442BRP 443

P/NDESCRIPTION

BRP 694

DRIVESHAFT SAFETY HOOPS

Front Hoop for BRP 426, 432, 433, & 439 Torque Arms (White)Rear Hoop for BRP 426, 432, 433, & 439 Torque Arms (White)Front Hoop for BRP 430 Torque Arms (Red)Rear Hoop for BRP 430 Torque Arms (Red)Front Hoop for BRP 9018 Adjustable Torque Arms (Yellow)Rear Hoop for BRP 9018 Adjustable Torque Arms (Yellow)Front Hoop for BRP 9090 Non Quick Change Adjustable Torque Arms (Blue)Rear Hoop for BRP 9090 Non Quick Change Adjustable Torque Arms (Blue)Replacement Bolt for BRP 1646 or BRP 9009(2 required) 5/8” X 1/2 shoulderReplacement Bolt for BRP 1647 or BRP 9010(2 required) 3/8” X 1/2 shoulder

BRP 1646BRP 1647BRP 1648BRP 1649BRP 9009BRP 9010BRP 9088BRP 9089BOL 100505CBOL 060505C

P/NDESCRIPTION

BRP 1646 BRP 1647 BRP 1648 BRP 1649

BRP 9006

BRP 9007

BRP 9008

BRP 442 and BRP 443 include all bolts, nuts and studs to mount torque to rear end.SEE PAGE 32 for bolt listing.

BRP 9012

BRP 9295SAME AS BRP 432 LESS FRONT HOLE

37


REAR ENDS & ACCESSORIESWINTERS QUICK CHANGE REAR ENDS

Bare Center Section 8 Rib Magnesium Right Bell8 Rib Magnesium Left Bell6 Rib Magnesium Right Bell6 Rib Magnesium Left BellUltra Light Aluminum SpoolStandard Weight Aluminum Spool10” - 4.12 Ring & Pinion10” - 4.86 Ring & PinionThreaded Ring Gear BoltsNon Threaded Ring Gear BoltsShim Kit for Aluminum SpoolSpool Seals8 Rib Bell O-RingRing Gear Adjustment Screw Kit - 8 Rib BellPinion Retaining RingPinion Jam Nut - Non Posi - LockRetaining Washer - Drive Yoke

WIN K5840WIN K5016-03WIN K5016-02WIN K1663-01BWIN K1663-02WIN 5034-11ULWIN 5034-11AWIN 5715WIN 5401WIN 7868WIN 7165WIN 5295WIN 7205WIN 7403WIN 5157WIN 5020WIN 5032RWIN 5037

P/NDESCRIPTION

Replacement Winters Quick Change Parts

WIN K5840WIN K5016-02WIN K5034-11UL

WIN 5401

Posi-Lock Nut8 Rib Adjuster Bolt6 Rib Adjuster BoltFront Seal Plate.375” Thick Replacement Front Seal.750” Thick Replacement Front SealFront Yoke (1 1/4” - 10 spline)Aluminum Front Yoke (1 1/4” - 10 spline)Rear CoverHD Rear Cover GasketRear Cover Bearing for WIN K6508Rear Lower BearingFront BearingAluminum Spool BearingBell RaceHeat Treated Lower ShaftAluminum Rear Cover NutsRear Cover Studs

WIN 6498RWIN 5157WIN 6238WIN K5018WIN 7204WIN 7204TWIN 3533WIN 5038ASWIN K6508WIN 6729HDWIN 7332WIN 7339WIN 7390WIN 7340WIN 7310WIN 5003WIN 7794AWIN 7802

P/NDESCRIPTION

Bare Center Rear EndsWinters 10” Quick Change - no tubesWinters 8” Ultra Lightweight Quick Change - no tubes

WIN K5270SWIN K5280-LW

P/NDESCRIPTION RING & PINION10” standard 4.86 ratio8” standard 4.12 ratio

SPOOLStandard AluminumUltra Light Aluminum

WIN K6508

WIN 7794A

WIN 7802 WIN 7398

REM ring and pinionBlack thermal disspersant coating10” EDM ring gear

WIN 8202-RPWIN 8208WIN 8208-486

P/NDESCRIPTION

10” Rear ends with no tubes areavailable with the following options:

WIN K5270S comes withthe following options:

4.86 RATIO8133 - Sprint Center

8155P - HD 8 Rib Bells8168 - HD Gear Cover

8115P - Aluminum Spool8104 - Pinion Posi-Lock Assembly

8143 - Pinion Nose Support

Winters 8” Ultra Light Quick Change - No Tubes

Winters 10” Quick Change - No Tubes

WIN K5280-LW comes withthe following options:

4.12 RATIO8111-8S - 4.12 R/P shortened8133-8S - Short Sprint Center

8104 - Posi Lock Assembly8115 - Aluminum Spool8155P - HD 8 Rib Bells

9139 - Pinion Nose Support

8” Rear ends with no tubes areavailable with the following options:

REM ring and pinionBlack thermal disspersant coating8” EDM ring gear

WIN 8202-RPWIN 8208WIN 8208V8

P/NDESCRIPTION


REAR ENDS & ACCESSORIESDMI CT-1 QUICK CHANGE REAR ENDS

All DMI CT-1 Rear Ends Come with the following Options:-Breather Assembly

-Correct through bolts for Modified Applications-Magenetic Drain Plug-AN 8 port for filler can

-Heat treated lower shaft-O ring gear cover

-8 Rib Bells

Low Drag DMI CT-1 Rear Ends have all the previous Options,and also include the following options:

- Severe Duty Bearings- Low Drag Teflon Lip Seals

Bare Magnesium Center Section8 Rib Magnesium Right Bell8 Rib Magnesium Right Bell - Black Coated8 Rib Magnesium Left Bell8 Rib Magnesium Left Bell - Black Coated4.86 Ring & PinionLow Drag 4.86 Ring & PinionSpool SealBell O-Ring SealAluminum SpoolUltra Light Aluminum SpoolFront Yoke SealLower Shaft Bearing (front and rear same) Rear Cover O Ring SealRear Cover Stud (6 required)Rear Cover Nut (6 required)Ring Gear Bolts (package of 12)Ring Gear Washer (package of 12)Front Seal PlateFront YokeSteel Lower ShaftAluminum Spool BearingReplacement Complete Rear Cover With Bearings InstalledReplacement Rear Cover BearingReplacement Rear Cover Bearing RetainersReplacement Rear Cover Bearing Retainer BoltsReplacement Breather Assembly

DMI RRC-1000DMI RRC-1108DMI RRC-1108-01DMI RRC-1107DMI RRC-1107-01DMI RRC-1305DMI RRC-1305-02-05DMI RRC-1104DMI RRC-1105DMI RRC-1270DMI RRC-1271DMI RRC-1002DMI RRC-1411DMI RRC-1345DMI RRC-1355DMI RRC-1361DMI RRC-1301DMI RRC-1302DMI RRC-1001DMI RRC-1479DMI RRC-1427DMI RRC-1171DMI RRC-1386DMI RRC-1350DMI RRC-1390DMI RRC-1391DMI RRC-1034

P/NDESCRIPTIONReplacement DMI Quick Change Parts

DMI RRC-1000

DMI RRC-1305

PROUDLY AMERICAN MADE

Did You Know...DMI Rears can have any BRP tubes

installed in them- just ask your salesmanfor more details!

DMI RRC-1270

DMI RRC-1108-01

Lightweight DMI CT-1 Rear Ends have all the previous Options,and also include the following options:

- EDM Ring Gear -Black Thermal Coating-REM Polished Ring and Pinion

DMI RRC-1034

DMI RRC-1386

DMI RRC-1390

DMI Quick Change Rear- NO TUBESDMI Quick Change Rear- NO TUBESDMI Lightweight Low Drag Rear with Thermal CoatingDMI Low Drag Quick Change Rear- NO TUBESDMI Lightweight Low Drag Rear with Thermal Coating

DMI CT1-486DMI CT1-412DMI CT1-412LWDMI CT1-486LDDMI CT1-486LW

DESCRIPTION4.864.124.124.864.86

RATIOLEFT TUBE LENGTH RIGHT TUBE LENGTH---------------

---------------


REAR ENDS & ACCESSORIESREAR END BRIDGE COMPONENTS

Outer 2 Piece Rear Tube Clamp For 8 Bolt Rear End Tubes (2 required)Outer 1 Piece Rear Birdcage Clamp for Adjustable Quad Lock Rear End Birdcages (2 required)Outer 1 Piece Rear Birdcage Clamp for Non Adjustable Quad Lock Rear End Birdcages (2 required)Outer 1 Piece Rear Tube Clamp for 3” Large Bearing Rear End Tubes (2 required)Rear End Bridge Mount For Rear of Quick Change Rear EndRear End Bridge Mount For Front of Quick Change Rear EndRear End Bridge Mount For Top of Quick Change Rear End (1 required)10 1/2” Radius Rod For Left Rear Top Bridge Mount (fits 8 bolt, large bearing and quad lock tubes)18” Radius Rod for Right Rear Top Bridge Moun t (fits 8 bolt, large bearing and quad lock tubes)1/2”F Left Hand Aluminum Rod End For Bridge Radius Rods (2 required)1/2”F Right Hand Aluminum Rod End For Bridge Radius Rods (2 required)Left Hand Jam Nut For Bridge (2 required)Right Hand Jam Nut For Bridge (2 required)

BRP 9036BRP 9406BRP 9037BRP 9039BRP 9040BRP 9041BRP 9059BRP 78105BRP 78180BRE 6081LBRE 6081RBRP 784BRP 785

P/NDESCRIPTION

BRP 9036 BRP 9036BK

BRP 9039 BRP 9039BK

BRP 9041

BRP 9059

BRP 9059BK

BRP 9406

REAR END MEASUREMENT TOOL

Rear End Measurement Tool BRP 9338P/NDESCRIPTION

BRP 9338

REAR END LASER ALIGNMENT KITS

Laser Rear End Checking Tool - Complete kit to check 3” tubes and quad lock rear ends (includes laser pointer)Laser String Tool - Pops onto Right Side Frame Rail to Allow Squaring Of Rear End (includes laser pointer)Replacement Laser Pointer For BRP 9311 / BRP 9314

BRP 9311

BRP 9314BRP 9315

P/NDESCRIPTION

BRP 9311

Rear End Bridge Mounts


REAR ENDS & ACCESSORIESQUICK CHANGE GEARS

10 Spline Quick Change Gears (1 3/8”)

WIN 8501WIN 8502WIN 8505WIN 8515AWIN 8515WIN 8526WIN 8506WIN 8525WIN 8512WIN 8507WIN 8507AWIN 8517WIN 8517AWIN 8508AWIN 8508WIN 8519WIN 8509AWIN 8509WIN 8511WIN 8503WIN 8513WIN 8518WIN 8518AWIN 8504AWIN 8520AWIN 8504WIN 8520WIN 8522WIN 8516WIN 8510WIN 8510AWIN 8534AWIN 8534WIN 8514WIN 8514AWIN 8535WIN 8532WIN 8532AWIN 8524WIN 8536WIN 8537WIN 8523WIN 8521WIN 8521AWIN 8527WIN 8543WIN 8528WIN 8528AWIN 8529WIN 8539WIN 8530WIN 8540WIN 8541WIN 8531WIN 8533AWIN 8533WIN 8531AWIN 8530A

WINTERS P/NHEAVY DUTY

4.86 RATIO4.11 RATIO

4.864.694.674.644.624.534.474.424.364.304.254.214.174.144.114.084.054.023.963.923.893.853.823.803.783.763.743.693.653.593.563.543.523.493.473.443.423.393.353.313.293.243.183.173.153.113.083.063.043.022.992.982.952.922.882.862.842.80

4.123.973.963.933.913.843.793.753.693.653.613.573.533.513.493.463.433.403.363.323.303.273.243.223.203.193.173.133.093.053.023.002.972.962.942.922.902.872.842.802.792.752.702.692.672.642.612.592.582.562.542.532.502.472.442.422.402.38

4.124.274.294.324.344.434.484.534.604.664.714.754.814.844.874.914.944.995.065.115.155.205.245.265.305.325.365.425.495.575.625.675.695.735.775.825.865.915.976.066.086.186.296.326.376.446.516.546.596.646.706.726.816.876.957.007.067.14

4.865.045.065.095.115.225.285.345.425.495.555.605.675.705.745.785.835.885.966.026.076.126.186.216.256.276.316.396.486.576.626.686.716.766.806.866.906.977.047.147.177.297.417.457.517.597.677.717.777.837.897.938.008.108.208.268.338.42

LOW LOWHIGH HIGH

PINION- 7 TEETHRING GEAR- 34 TEETH

PINION- 9 TEETHRING GEAR- 37 TEETH COLEMAN P/N

LIGHTWEIGHT

COL 207-1COL 207-2COL 207-5

COL 207-15COL 207-26COL 207-6COL 207-25COL 207-12COL 207-7COL 207-7CCOL 207-17

COL 207-8CCOL 207-8COL 207-19COL 207-9CCOL 207-9COL 207-11COL 207-3COL 207-13COL 207-18COL 207-18CCOL 207-4CCOL 207-20CCOL 207-4COL 207-20COL 207-22COL 207-16COL 207-10COL 207-10C

COL 207-34COL 207-14COL 207-14CCOL 207-35COL 207-32COL 207-32CCOL 207-24COL 207-36COL 207-37COL 207-23COL 207-21COL 207-21CCOL 207-27COL 207-43COL 207-28COL 207-28ACOL 207-29

Did You Know...

To determine Gear RPM change:RPM Gear Ratio X New Ratio= New RPM

EXAMPLE - 8000rpm 6.58 X 6.35 = 7720rpm

WIN 4401WIN 4402WIN 4403WIN 4403BWIN 4403AWIN 4404WIN 4405WIN 4405AWIN 4406WIN 4424WIN 4425WIN 4407WIN 4423WIN 4408WIN 4422WIN 4409WIN 4410WIN 4411WIN 4412WIN 4413WIN 4414WIN 4415WIN 4416WIN 4417WIN 4418WIN 4418AWIN 4419WIN 4420WIN 4427WIN 4421WIN 4428WIN 4429WIN 4426WIN 4430WIN 4431WIN 4432

WINTERS P/N

5.13 RATIO4.88 RATIO

5.134.924.724.594.514.344.144.063.993.933.853.803.733.663.613.573.503.423.363.353.263.213.163.083.032.932.872.852.782.732.712.682.652.572.502.44

4.884.684.494.374.294.133.943.863.803.743.663.613.553.493.433.393.333.253.203.183.113.053.002.932.882.792.732.712.642.592.582.552.522.442.382.32

4.885.095.305.455.555.776.046.166.276.376.516.596.716.836.937.027.167.327.457.487.677.817.938.138.268.548.718.789.019.199.259.359.439.76

10.0010.27

5.135.355.585.735.836.066.356.486.606.696.846.937.057.187.297.377.527.707.837.878.068.218.348.558.688.989.169.239.479.669.729.839.92

10.2610.5210.80

LOW LOWHIGH HIGH



6 Spline Midget Gears (1”)

Quick Change Accessories

Aluminum Gear Drain PanPlastic Gear Tote BoxAluminum Rear End Filler (AN 10 Outlet)

BRP 5110ALL 14350BRP 9152

P/NDESCRIPTION

BRP 5110 BRP 9152 ALL 14350


REAR ENDS & ACCESSORIESBICKNELL QUAD LOCK TUBES

Did You Know...Quad Lock tubes have .281” wall thickness,and are anodized black. They use quad-lock

birdcages.

LARGE BEARING REAR END TUBES

BRP 4000-60

.281” Wall Heavy Duty Aluminum Tubes

1/4” Wall Steel Tube

Steel Tube- Cut to Desired Length BRP 3900-60P/NDESCRIPTION

28 1/16”TUBE LENGTH AXLE LENGTH

33 3/8”

std LR tube1” longer LR tube2” longer LR tubestd RR tube1” longer RR tube2” longer RR tube

BRP 3800-05BRP 3800-09BRP 3800-10BRP 3800-60BRP 3800-70BRP 3800-72

PLAIN P/NDESCRIPTION20 1/16”21 11/16”22 1/16”28 1/16”29 1/16”30 1/16”

TUBE LENGTH AXLE LENGTH

25 5/8”27”

27 3/4”33 3/8”34 1/8”35 1/8”

BRP 3800-05BK

BRP 3800-60BK

BLACK P/N

LR Standard Quad Lock TubeLR 2” Longer Quad Lock TubeLR 4” Longer Quad Lock TubeRR Standard Quad Lock Tube

BRP 4000-05BRP 4000-10BRP 4000-30BRP 4000-60

P/NDESCRIPTION20 1/16”22 1/16”24 1/16“28 1/16”


25 5/8”27 3/4”29 3/4“33 3/8”

BRP 3800-60

Did You Know...BRP tubes have a thicker wall for

added strength!

Did You Know...Quad Lock Tubes have 4 flats that locate the birdcages.

The flats keep the birdcages from spinning on thetube, giving it more strength than conventional keyed set-ups.

No more drilling required- just bolt ‘em on and goracing!

Black Anodized

Did You Know...Always make sure the quad-lock birdcage

bolts are tight- especiallyafter the first race!

Quad Lock Tubes - No Steel Ring

LR Standard Quad Lock TubeLR 2” Longer Quad Lock TubeRR Standard Quad Lock TubeQuadlock Pavement - Std FlatsQuadlock Pavement - 2” Longer Flats

BRP 4050-05BRP 4050-10BRP 4050-60BRP 4050-80BRP 4050-81

P/NDESCRIPTION20 1/16”22 1/16“28 1/16”30 1/16”30 1/16”


25 5/8”27 3/4“33 3/8”35 1/8”35 1/8”

Quad Lock Tubes with Steel Seal Ring

AccessoriesLocking spindle nut assemblySteel ring seal for 4050 series tubesReplacement O-Ring for BRP 4050-01Inner hub seal for 4050 series tubesSTD Inner hub seal for 4000 series tubesInner Low Drag hub seal for 4000 series tubesInner Hub Seal for Oil Filled Hubs2 1/2” Outer Tube Seal for Oil Filled Hubs

BRP 6230BRP 4050-01NIA 150WIN 7289VBRP 6225BRP 6232WIN 7284VBRP 9398

P/NDESCRIPTION

NOTE: 4000 series tubes use the following seals:BRP 6225 - STD seal for grease BRP 6232 - Low Drag seal for grease only

WIN 7284V - STD seal for oil filled hubs

NOTE: 4050 series tubes use the following seals:WIN 7289V - STD seal for oil or grease filled hubs

Black Anodized

BRP 4050-60

BRP 4050-01 WIN 7289V BRP 9398


REAR ENDS & ACCESSORIES

ONE PIECE WIDE 5 TUBES Did You Know...

Aluminum Tubes are machined from special aircraft qualitymaterial and have a 1/4” wall thickness with radiused

corners. They can also be cut to any length!

8 BOLT STEEL SPINDLES

8 Bolt Steel SpindleHeat Treated 8 Bolt Steel SpindleCourse Thread Spindle Bolts (BRP Aluminum and Steel Tubes)Fine Thread Spindle Bolts (Winters Steel Tubes)Aluminum Locking Spindle Nut Assembly

BRP 486BRP 486HTBRP 472CBRP 472BRP 320

P/NDESCRIPTION

BRP 486HT

Steel Wide 5 TubeSteel Wide 5 TubeSteel Wide 5 TubeAluminum Wide 5 Tube

BRP 3870BRP 3876BRP 3880BRP 3781

P/NDESCRIPTION TUBE LENGTH

28 1/2”30 1/2”32 1/8”32 1/2”

AXLE LENGTH

34 1/8”36 1/8”38 1/4”

39”

BRP 3781

BRP 3880

G.N. 5 X 5 TUBE

Right Hand Thread Steel Tube 29 1/8” LongLeft Hand Thread Steel Tube 29 1/8” LongRight Hand Lock NutLeft Hand Lock NutLocking Tab Washer

BRP 3280BRP 3280LBRP 804-5BRP 804-6BRP 804-4

P/NDESCRIPTION

3” O.D. X .188 Wall Chrome Moly Steel Tube

WELD ON SPINDLE SNOUTS

BRP 801-1

BRP 800-1

BRP 799-1 BRP 791 BRP 796

Rear 5 X 5 Spindle Snout for .188” wall Tube (right hand thread)Rear 5 X 5 Spindle Snout for .188” wall Tube (left hand thread)Wide 5 Rear Spindle Snout for .188” wall TubeMini 3/4 Ton Snout for .188” Wall Tube5 X 5 Snout (Howe Style Hub) for .188” Wall TubeWide 5 Late Model Front Spindle

BRP 801-1BRP 802-1BRP 800-1BRP 799-1BRP 791BRP 796

P/NDESCRIPTION

Aluminum Locking Spindle Nut Assmbly BRP 320P/NDESCRIPTION

8 BOLT REAR END TUBES

Aluminum 8 Bolt Rear End Tubes

LR Standard TubeLR Coil Over TubeRR Standard TubeRR Coil Over TubeUnanodized Tube


PLAIN P/NDESCRIPTION TUBE LENGTH

15”16 1/2”22 5/8”24 3/4”25 1/4”

AXLE LENGTH

28”29 3/4”36 1/8”38 1/4”

39”


BLACK P/N

Steel 8 Bolt Rear End Tubes

LR Standard Steel TubeRR Standard Steel Tube

WIN 6577-15WIN 6577-23

P/NDESCRIPTION TUBE LENGTH

15”23”

AXLE LENGTH

28”36 1/8”BRP 3576


REAR ENDS & ACCESSORIESDOUBLE SPLINED REAR AXLES

Did You Know...Quad Lock & Large Bearing Axles:

Left Rear- 25 5/8”; Right Rear- 33 3/8”8 Bolt Axles:

Left Rear- 28”; Right Rear- 36 1/8”

Solid Wide 5-31 x 24 Spline

Gun Drilled Wide 5-31 x 24 Spline

Ultra LightGun Drilled Wide 5

-31 x 24 Spline

25 5/8”27”28”29”

29 3/4”30 1/2”

32”32 5/8”33 3/8”34 1/8”35 1/8”36 1/8”

37”38 1/4”

BRP 3205BRP 3009BRP 3020BRP 3025BRP 3030BRP 3038BRP 3045BRP 3050BRP 3260BRP 3070BRP 3072BRP 3076BRP 3078BRP 3080

P/NAXLE LENGTH8.80#9.65#

10.16#10.40#10.74#10.98#11.58#11.74#11.20#12.28#12.66#13.04#13.32#13.00#

AXLE WEIGHT25 5/8”26 1/8“

28”29 3/4”

31“32”

33 3/8”34 1/8”35 1/8”36 1/8”

37”38 1/4”

BRP 3205GBRP 3108BRP 3120BRP 3130BRP 3140BRP 3145

BRP 3260GBRP 3170BRP 3172BRP 3176BRP 3178BRP 3180

6.60#7.30#7.74#8.22#8.54#8.82#8.80#9.46#9.68#9.96#

10.15#10.00#

P/NAXLE LENGTH AXLE WEIGHT16”

25 5/8”27”28”

29 3/4“30 1/2”

31“32”

34 1/8”

BRP 3100LBRP 3105LBRP 3109LBRP 3120LBRP 3130LBRP 3138LBRP 3140LBRP 3145LBRP 3170L

4.00#5.60#6.60#6.74#7.04#7.22#7.48#7.55#8.06#

P/NAXLE LENGTH AXLE WEIGHT

DWARF / MOD LITE AXLES

23 Spline Toyota Taper(Bert Hub)

17 1/8”28 3/8”

BRP 8051BRP 8053

P/NAXLE LENGTH

31 X 24 Spline

16”29 3/4”

BRP 3100LBRP 3130L

P/NAXLE LENGTH

31 X 17 Spline

16”29 1/4”

MFG PCH54MFG PCH55

P/NAXLE LENGTH

Toyota X 17 Spline

16 3/4”28 1/2”

MFG PCH61MFG PCH62

P/NAXLE LENGTH

MFG PCH54 shown



MINI 3/4 TON FLOATER ASSEMBLY

FORD 9” REAR ENDS

All BRP Ford 9” rear end housings are jig welded and feature thefollowing options standard:

- Winters 9“ Housing-3/16” Lightweight Chrome Moly Tubes

-1/2” NPT Female Drain with Plug-1/2” NPT Female Vent- Any Offset Available

- Any Length Tube- Choice of 4 spindle options. WIN 2465 Bare Housing

*SPECIFY TUBE LENGTH AND OFFSET WHEN ORDERING*

BRP 121

BRP 109

BRP 108C

Complete Rear End Assembly (Includes all parts listed below)SPECIFY TUBE LENGTH AND OFFSETHousing with Tubes and Mini 3/4 Ton SpindlesSPECIFY TUBE LENGTH AND OFFSETWide 5 Inner Hub SealsWide 5 Inner Wheel BearingWide 5 Outer Hub bearingSpindle Lock Nut31 X 24 Splined Axles (Length Dependant on Tube Length)Bolt KitLight Weight Steel Drive Flange (2 pounds each)Steel 5 X 5 hub - 5/8”C Quick start studs (7.9 pounds each)Aluminum Rotor Adaptor

BRP 100

BRP 102BRP 114BRP 117BRP 118BRP 320BRP 30xxBRP 55BRP 121BRP 108CBRP 109

P/NDESCRIPTION

Optional At No Charge:1- Aluminum Hubs (6.25 pounds each) BRP 108AC

2- BRP 805 Aluminum Drive Flanges

Optional at extra charge:- Gundrilled Axles

- BRP 124 Quick Locator Cap for BRP 121- BRP 805-1 Locator Cap for BRP 805

Did You Know...Our Most Popular Rear End is Approved

for NASCAR Canada Competition.

Did You Know...It is recommended to use an inboard axle seal

such as BRP 6110 to ensure the gear oilstays where it should- in the rear end!

Did You Know...Ford 9” Rear Ends have 4 spindle options:

Wide 5, Mini 3/4 Ton, Grand Nationaland Howe Style.

Ford 9” Housing with tubes and mini 3/4 Ton Spindles(typical weight approx. 46 pounds) SPECIFY TUBE LENGTH AND OFFSETFord 9” Housing with tubes and Wide 5 Spindles(typical weight approx. 46 pounds) SPECIFY TUBE LENGTH AND OFFSETFord 9” Housing with tubes and Grand National Spindles(typical weight approx. 46 pounds) SPECIFY TUBE LENGTH AND OFFSET3”O.D. X 24 1/2” Long Steel Tube with Mini 3/4 Ton SpindleBare 9” Ford HousingReplacement Pot Studs (sold each)

BRP 102

BRP 102-5

BRP 102-GNBRP 103WIN 2465BRP 112

P/NDESCRIPTION

Replacement 5/8”C Stud (sold each)Replacement Inner Race (both steel and aluminum hub)Replacement Outer Race (both steel and aluminum hub)


P/NDESCRIPTIONReplacement Parts

BRP 805

BRP 805-1

BRP 124


REAR ENDS & ACCESSORIESFORD 9” REAR END PARTS

31 Spline (FORD)Cross Pin (FORD)28 Spline (Chevy)26 Spline (Chevy)

ALL 68122ALL 68120ALL 68160COL 801-250

P/NDESCRIPTION APPLICATION1964 - 1980 Ford 9”Ford 9”8 1/2” 10 Bolt, 30 Spline Pin7 1/2” Ring Gear, 10 Bolt

Mini Spools & Pins

Ford 9” Axle Tube SealsPlainBlackGold

BRP 6110BRP 6112AFC 60323-2

SEAL P/NCOLOR TUBE DIA.

3/16” (.188“)7/32” (.219“)1/4” (.250)

3”3”3”

WALL THICKNESS REPLACEMENTO-RING ASSEMBLY

BRP 6111BRP 6113

Replacement Inner Seal AFC 60325P/NDESCRIPTION

Reusable Ford 9” Gasket (sold each)Reusable Quick Change Gasket (sold each)HD Quick Change Gasket (sold each)

FEL 2302FEL 2303WIN 6729HD

P/NDESCRIPTIONRear End Gaskets

DRIVESHAFT U-BOLTS

U-Bolt (sold each - comes with 2 lockwashers and 2 nuts)Billet Aluminum U-Joint Caps (SOLD IN PAIRS)

BRP 513BRP 9246

P/NDESCRIPTION

PINION PANHARD MOUNTS

AFC 202209” FORD Steel Pinion Panhard Mount AFC 20220

P/NDESCRIPTION

QUICK CHANGE REAR END VENT ASSEMBLY

3/8”NPT Rear End Vent AssemblyDMI Rear End Breather AssemblyWinters 8” Ring Gear Breather Assembly

BRP 910DMI RRC1034WIN 2966-02

P/NDESCRIPTION

REAR END INSPECTION PLUGS

AN12 O-Ring Inspection Plug (found in right bell)Replacement O-Ring for BRP 909AN 10 O-Ring inspection Plug (found in center section)Replacement O-Ring for BRP 908

BRP 909NIA 222BRP 908NIA 212

P/NDESCRIPTION

Ford 9” Pot Studs (sold each) BRP 112P/NDESCRIPTION

Ford 9” Pot Studs

AFC 60325

BRP 6110

BRP 910

BRP 513BRP 9246

BRP 909 BRP 908

BRP 112

FEL 2302 FEL 2303



ALUMINUM LOWERING BLOCKS Did You Know...Adjustable Lowering Blocks allow front to rear

adjustment so you can lead or trail the rear tire- giving you greater set-up flexibility!

QUICK CHANGE THIRD LINK MOUNT

Red Anodized Billet Aluminum Quick Change Third Link Mount (sold in 2’s) BRP 438P/NDESCRIPTION

ADJUSTABLE LATE MODEL PANHARD SLIDER

Adjustable 1 1/2” Aluminum Lowering BlockAdjustable 2 1/2” Aluminum Lowering Block

BRP 6160BRP 6162

P/NDESCRIPTION

BRP 509000

BRP 5094

BRP 5099

BRP 5093

Adjustable Late Model Panhard Slider AssemblyAluminum Slider Block1 1/8” Threaded SleeveAluminum Threaded Adjuster Rod1/4” Detent BallSteel Side Plate (2) requiredSteel End Plate


P/NDESCRIPTIONAdjustable Panhard Slider and Replacement Parts

Serrated Weld On Panhard Mount Lower Offset Roll Center MountSame as BRP 5094, but Weld Tab is centeredSerrated Front Mount5/8” Thick Lightweight Serrated Mount

BRP 5094BRP 5095BRP 5099BRP 5093

P/NDESCRIPTION

TORQUE TUBE ASSEMBLIES

Aluminum Torque Tube Collar OnlyReplacement Tube Only (cut to length)26 3/4” Tube and Collar Assembly24 3/16” Tube and Collar Assembly27 3/16” Tube and Collar Assembly2 5/8” Billet Aluminum Hard Coated Torque BallTorque Tube Spacer

BRP 500BRP 516BRP 519-1BRP 518BRP 519WIN 6654BRP 9340

P/NDESCRIPTION

BRP 519-1

LIVE AXLE HUB SPACERS

.200”

.250”

.300

.350”

.500”

.625”

.750”

.880”1.00”1.06”2.00”

BRP 914BRP 915BRP 916BRP 917BRP 917-1BRP 917-2BRP 917-3BRP 918BRP 917-4BRP 919BRP 917-8

SMOOTHP/NWIDTH SPLINED

P/N

BRP 915S

BRP 917SBRP 917-1SBRP 917-2SBRP 917-3S

BRP 917-4S

BRP 917-8S

Flat Hub Spacers

.250”

.500”

.750”1.00”1.25”1.50”

BRP 923BRP 924BRP 925BRP 926BRP 927BRP 928

SMOOTHP/NWIDTH SPLINED

P/N

BRP 924SBRP 925SBRP 926SBRP 927SBRP 928S

Tapered Hub Spacers

TAPERED

**Note- Flat spacers are used for spacinghub/bearing inside the hub, while tapered

spacers are used for spacing outside the hub.**

LIVE AXLE HUBS

Standard Spline Billet Aluminum Dirt HubTight Spline Billet Aluminum Asphalt Hub(common in Super Modified applications)

BRP 4306

BRP 4307

P/NDESCRIPTION

FLAT

BRP 917-3

BRP 928S

BRP 9340

WIN 6654


HUBS & DRIVE FLANGES

BRP Billet Large Bearing 3 BOLT Rear HubRear Hub Assembly (includes races & studs)Replacement Inner or Outer Race Inner or Outer Bearing Replacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyDrive Flange AssemblyReplacement Center Cap for BRP 93813 Bolt Rotor Adaptor To Adapt To 8 on 7” RotorOptional Tee Nuts For BRP 9384

BRP 9380BRP 6222BRP 6224BRP 2060BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 9380ABRP 6230BRP 9381BRP 122 BRP 9384BRP 9386

P/NDESCRIPTION1234555567891011

REAR LARGE BEARING BILLET HUBS

BRP Billet Large Bearing 5 BOLT Rear HubRear Hub Assembly (includes races & studs)Replacement Inner or Outer Race Inner or Outer Bearing Replacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyDrive Flange AssemblyReplacement Center Cap for BRP 93815 Bolt Rotor Adaptor To Adapt To 8 on 7” RotorOptional Tee Nuts For BRP 9384

BRP 9383BRP 6222BRP 6224BRP 2060BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 9381BRP 122BRP 9385BRP 9386


HUB PRELOAD KITS

Front Large Bearing Hub Preload Kit - (will work with any front 2 7/8” largebearing hub)Rear Large Bearing Hub Preload Kit - (will work for any rear 2 7/8” largebearing hub)

BRP 9392

BRP 9393

P/NDESCRIPTION

BILLET HUB ROTOR ADAPTORS

3 Bolt Taper Head Rotor Adaptor to 8 on 7” Rotor (used on BRP 9380/9382)5 Bolt Taper Head Rotor Adaptor to 8 on 7” Rotor (used on BRP 9393/9401)Tee Nuts (package of 8 pre-drilled bolts and tee nuts)

BRP 9384BRP 9385BRP 9386

P/NDESCRIPTION

BRP 9380

4

1

53

6

2

7

23

8

9

10

BRP 9383

4

1

53

6

2

7

23

8

9

10

11

11

Did You Know...Each kit has enough spacers to do

1 hub only! So order 2 kits if you plan on doingboth hubs. Or order 4 kits if you plan ondoing all 4 hubs and making your car roll

with very little resistance!

BRP 9384 BRP 9385 BRP 9386



BRP Billet Large Bearing 3 BOLT Front HubRear Hub Assembly (includes races & studs)Replacement Inner or Outer Race Inner or Outer Bearing Replacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Dust Cap (Includes Bolts) Black Anodized3 Bolt Rotor Adaptor To Adapt To 8 on 7” RotorOptional Tee Nuts For BRP 9382 (package of 8 bolts and tee nuts)

BRP 9382BRP 6222BRP 6224BRP 2060BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 6203CBRP 9382BRP 9386


BRP Ultra Light Wide 5 Billet Hub

FRONT LARGE BEARING BILLET HUBS

WIDE 5 BILLET HUBS

BRP 9382

4

1

53

6

2

7

23

8

9

BRP Severe Duty Wide 5 Billet HubWide 5 Hub Assembly (includes races & studs) - Red AnodizedReplacement Wide 5 Hub Only - Red AnodizedReplacement Adaptor Plate - Red AnodizedWide 5 Hub Assembly (includes races & studs) - Black AnodizedReplacement Wide 5 Hub Only - Black AnodizedReplacement Adaptor Plate - Black AnodizedReplacement Inner RaceInner BearingReplacement Outer RaceOuter BearingReplacement Wheel studInner SealLow Drag Inner SealLocking Nut AssemblyBRP Red Aluminum Drive FlangeBRP Black Aluminum Drive Flange5 Bolt Drive Flange Bolt KitReplacement O-Ring for Drive FlangeReplacement Cap for BRP Drive FlangeOptional Dust Cap

BRP 6201BRP 6201ABRP 6201BBRP 6201BKBRP 6201ABKBRP 6201BBKBRP 115BRP 117BRP 116BRP 118BRP 2060BRP 114ALL 72122BRP 320BRP 348BRP 348BKBRP 348BBRP 348SBRP 349BRP 6201C

P/NDESCRIPTION1

1A1B1

1A1B2345677899

10111213

BRP 62019

10

1211

13

27

3

5 84

6

1A

1B

1

Ultra Light Wide 5 Billet Hub with 5 Bolt Rotor MountRotor Adaptor (adapts 5 bolt hub to 8 on 7” rotors)Optional Floating Rotor Tee Nuts (package of 8 bolts and tee nuts)Wide 5 Drive FlangeWide Five Dust CapReplacement Inner RaceInner BearingReplacement Outer RaceOuter BearingReplacement Wheel studInner SealLow Drag Inner SealLocking Nut AssemblyReplacement Drive Flange Cap

BRP 9401BRP 9385BRP 9386BRP 9402BRP 9403BRP 115BRP 117BRP 116BRP 118BRP 2060BRP 114ALL 72122BRP 320BRP 122


1011111213

BRP 94016

117

4

13

9 128

10

1

2

3

10


HUBS & DRIVE FLANGESREAR LARGE BEARING HUBS

BRP Large Bearing Rear Hub

REAR LARGE BEARING DRIVE FLANGES

Bert Large Bearing Rear HubRear Hub Assembly (includes races & studs)Replacement Inner or Outer RaceInner or Outer BearingReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Drive Flange (includes bolts) - Red anodizedBRP Aluminum Drive Flange (includes bolts) - Black AnodizedReplacement Center Cap For BRP 345BK

BER CTD-001BRP 6222BRP 6224BRP 2059BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 345BRP 345BKBRP 122


BRP 5 Bolt Large Bearing Drive Flange with Bolts and CapBRP 5 Bolt Large Bearing Drive Flange with Bolts and CapBRP 5 Bolt Flank Drive Flange for BRP 6202 Hub with Bolts and CapReplacement Bolt Kit for BRP 345 Drive Flanges (package of 5)Replacement Cap for BRP 345 & BRP 345BKReplacement Cap for BRP 6202DOptional Studs With Locknut

BRP 345BRP 345BKBRP 6202DBRP 346BRP 122BRP 349BRP 337

P/NDESCRIPTIONRed

BlackBlack

BlackBlack

COLOR

Winters Large Bearing Rear HubRear Hub Assembly (includes races & studs)Replacement Inner or Outer Race - WINTERS ONLYInner or Outer Bearing - WINTERS ONLYReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Drive Flange (includes bolts) - Red AnodizedBRP Aluminum Drive Flange (includes bolts) - Black AnodizedReplacement Center Cap For BRP 345BK

WIN 3266WIN 8658-2WIN 8658-1BRP 2059BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 345BRP 345BKBRP 122


BRP 6202

4

1A

85

3

6

2

7

23

1B

1

9

WIN 3266

4

53

6

1

7

8

2

23

9

BER CTD-001

4

53

6

1

7

8

2

23

9

Rear Hub Assembly (includes races & studs) - Red AnodizedReplacement Large Bearing Hub Only - Red AnodizedReplacement Adaptor Plate Only - Red AnodizedReplacement Inner or Outer RaceInner or Outer BearingReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Drive Flange (includes bolts) - Black AnodizedReplacement Center Cap For BRP 6202D

BRP 6222BRP 6224BRP 2060BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230

BRP 6202DBRP 349

RED P/NDESCRIPTION1

1A1B23455556789


BRP 6202BKBRP 6202ABKBRP 6201BBK

BLACK P/N

BRP 345

BRP 6202D


HUBS & DRIVE FLANGESLARGE BEARING FRONT HUBS

BRP Large Bearing Front Hub

BRP 6203

4

1A

85

3

6

2

7

23

1B

1

Bert Large Bearing Front HubFront Hub Assembly (includes studs and races)Inner or Outer RaceInner or Outer BearingReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Dust Cap (includes bolts) - Red AnodizedBRP Aluminum Dust Cap (includes bolts) - Black Anodized

BER CTD-NYM-H01BRP 6222BRP 6224BRP 2059BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 6226BRP 6226BK


BER CTD-NYM-HO1

4

53

6

1

7

8

2

23

SEE PAGE 20 FOR SPINDLE APPLICATIONS

BRP WIDE 5 MODIFIED FRONT HUB

Front Hub Assembly (includes races, studs, rotor bolts & dust cap) Red AnodizedFront Hub Assembly (includes races, studs, rotor bolts & dust cap) Black AnodizedReplacement Inner RaceInner BearingReplacement Outer RaceOuter BearingInner SealLocknut AssemblyReplacement StudReplacement Dust Cap

BRP 4570BRP 4570BKBRP 826BRP 828BRP 827BRP 829BRP 835BRP 831LBRP 2060BRP 4571


163

7

2

5

8

4

9

BRP 4570

BRP Wide 5 Front Hub

Winters Large Bearing Front HubFront Hub Assembly (includes studs and races)Inner or Outer RaceInner or Outer BearingReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Dust Cap (includes bolts) - Red AnodizedBRP Aluminum Dust Cap (includes bolts) - Black Anodized

WIN 3266FWIN 8658-2WIN 8658-1BRP 2059BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230BRP 6226BRP 6226BK


Rear Hub Assembly (includes races & studs) - Red AnodizedReplacement Large Bearing Hub Only - Red AnodizedReplacement Adaptor Plate Only - Red AnodizedReplacement Inner or Outer RaceInner or Outer BearingReplacement Wheel studStandard Inner Seal - NO STEEL SLEEVE ON TUBE Low Drag Seal (not for oil use) - NO STEEL SLEEVE ON TUBEInner Seal For Oil Filled Hubs - NO STEEL SLEEVE ON TUBEInner Seal For Oil and Grease - WITH STEEL SLEEVEInner Seal Snap RingLocking Nut AssemblyBRP Aluminum Dust Cap (Includes Bolts) Black Anodized

BRP 6222BRP 6224BRP 2060BRP 6225BRP 6232WIN 7284VWIN 7289VBRP 6223BRP 6230

BRP 6203C

RED P/NDESCRIPTION1

1A1B2345555678


BRP 6203BKBRP 6203ABKBRP 6201BBK

BLACK P/N

WIN 3266F

4

53

6

1

7

8

2

23


HUBS & DRIVE FLANGESWILWOOD STARLIGHT 55 HUBS

5 Bolt Wide 5 Aluminum HubRear Hub Assembly (includes races & studs)Replacement Inner RaceInner BearingReplacement Outer BearingOuter BearingInner SealLow Drag Inner SealReplacement Wheel studLocking Nut AssemblyRed BRP Aluminum Drive Flange (includes bolts)Black BRP Aluminum Drive Flange (includes bolts)Wilwood Plain Aluminum Drive Flange (includes bolts)5 Bolt Drive Flange Bolt KitReplacement O Ring for BRP Drive FlangeReplacement Cap for BRP Drive Flange

WIL 270-6513CBRP 115BRP 117BRP 116BRP 118BRP 114ALL 72122BRP 2059BRP 320BRP 348BRP 348BKWIL 270-6733BRP 348BBRP 348SBRP 349


101112

Front Wide 5 Aluminum HubFront Hub Assembly (includes races, studs, & dust cap)Replacement Inner RaceInner BearingReplacement Outer BearingOuter BearingInner SealLow Drag Inner SealReplacement Wheel studLocking Nut AssemblyReplacement Hub Dust Cap

WIL 270-6735CBRP 115BRP 117BRP 116BRP 118BRP 114ALL 72122BRP 2059BRP 320WIL 270-6913


9

16

3 2

5 8

7

4

WIL 270-6735C

Rear Hub Assembly (includes races & studs)Replacement Inner RaceInner BearingReplacement Outer BearingOuter BearingInner SealLow Drag Inner SealReplacement Wheel studLocking Nut AssemblyRed BRP Aluminum Drive FlangeBlack BRP Aluminum Drive FlangeBlue BRP Aluminum Drive FlangeReplacement Drive Flange Cap with O-ringReplacement Drive Flange Bolt (sold each)Drive Flange Bolt Kit (includes bolts and lock washers)

WIN 6690BRP 115BRP 117BRP 116BRP 118BRP 114ALL 72122BRP 2059BRP 320BRP 343BRP 343BKBRP 343BLBRP 122BOL 10240502CBRP 339


101112

Winters Wide 5 Aluminum Hub

16

3 2

5 8

7

4

9

WIL 270-6513C

10

1211

16

3 2

7

5 84

WIN 6690

10

11

9

12



WIDE 5 SPINDLE NUTS

WIDE 5 BEARINGS & SEALS

Wide 5 Bearing Assembly(includes seal, inner & outer bearing, and BRP 320 Lock Nut)Wide 5 Inner SealLow Drag Wide 5 Inner SealWide 5 Inner RaceWide 5 Outer RaceWide 5 Inner BearingWide 5 Outer BearingREM Finish Wide 5 Inner RaceREM Finish Wide 5 Outer RaceREM Finish Wide 5 Inner BearingREM Finish Wide 5 Outer BearingSeals-It Inner Hub Seal (keeps cast hubs from filling with oil)

BRP 113BRP 114ALL 72122BRP 115BRP 116BRP 117BRP 118WIN 7322REMWIN 7323REMWIN 7324REMWIN 7325REMSEA HS2001

P/NDESCRIPTION

BRP 113

Wide 5 Aluminum Locking Spindle Nut Assembly(includes aluminum nut, 2 washers, and bolts)2 Replacement Lock Washers and Bolts OnlyReplacement Inner Solid Washer OnlyReplacement Outer Slotted Washer OnlyNarrow Steel Nut Only (2 Required)Narrow Aluminum Nut Only (2 Required)Steel Tab Washer for BRP 319S

BRP 320BRP 320WBRP 320W-1BRP 320W-2BRP 319SBRP 319BRP 318

P/NDESCRIPTION

SEA HS2001

BRP 320

BRP 318

BRP 319S

SPINDLE NUT WRENCHES

Large Bearing Locking Nut Adjuster WrenchWide 5 Locking Nut Adjuster WrenchGrand National Locking Nut Adjuster Wrench

BRP 6231BRP 317ACOL 850-002

P/NDESCRIPTION

BRP 317A COL 850-002BRP 6231

GN BEARINGS & SEALS

Spindle Inner SealHub SealInner and Outer RaceInner and Outer BearingLH Spindle NutRH Spindle NutLocking Tab Washer

BRP 804-3BRP 804-2BRP 804BRP 804-1BRP 804-6BRP 804-5BRP 804-4

P/NDESCRIPTION

1

LIVE AXLE HUBS

Standard Spline Billet Aluminum Dirt HubTight Spline Billet Aluminum Asphalt Hub(common in Super Modified applications)

BRP 4306

BRP 4307

P/NDESCRIPTION

SEE PAGE 47 FOR LIVE AXLE SPACERS AND NUTS


HUBS & DRIVE FLANGES5 on 5” / 5 on 4 3/4” HUBS

5 on 5” Coarse Hub Assembly (includes studs & races)Replacement Retaining RingReplacement Inner and Outer RaceInner or Outer BearingInner Hub SealSpindle SealTab WasherLeft Hand Thread Spindle NutRight Hand Thread Spindle Nut Drive Flange (includes cap and bolts)

WIN 2255CWIN 7644BRP 804

BRP 804-1BRP 804-2BRP 804-3BRP 804-4BRP 804-6BRP 804-5WIN 1680

5 on 5”DESCRIPTION1234567889

5 on 4 3/4”WIN 2566CWIN 7644BRP 804


WIN 1680-475

LATE MODEL IMPALA STEEL HUBS

Impala Hub Assembly (includes 8 on 7” rotor adaptor, races, & 5/8”C studs)Inner SealOuter Wheel Bearing Reducer BushingInner Wheel BearingOuter Wheel BearingDust CapOptional Bullet Style Dust CapReplacement Coarse Thread Wheel Stud (sold each)Replacement Fine Thread Wheel Stud (sold each)Replacement Inner RaceReplacement Outer Race

BRP 861CBRP 853BRP 854BRP 828-1BRP 829BRP 814BRP 814BBRP 2075BRP 2061BRP 826BRP 827

P/NDESCRIPTION

BRP 861C

BRP 814BRP 814B

‘70-’72 Impala and Howe Spindles

9

7

14

52

4

3

3

68

MINI 3/4 TON HUBS

BRP 108C

BRP 805-1

BRP 805

BRP 124

BRP 121

Mini 3/4 Ton Steel Hub (includes 5/8”C studs, & races)Mini 3/4 Ton Aluminum Hub (includes 5/8”C studs, & races)Steel Drive Flange (will fit both steel and aluminum hub)Aluminum Drive Flange (will fit both steel and aluminum hub)Aluminum Rotor adaptor - 8 on 7” (required for steel and aluminum hubs)Inner BearingOuter BearingHub SealSpindle Lock Nut AssemblyReplacement Outer RaceReplacement Inner RaceQuick Start Locator Cap for BRP 805 Drive Flange Quick Start Locator Cap for BRP 121 Drive FlangeReplacement 5/8”C Stud

BRP 108CBRP 108ACBRP 121BRP 805BRP 109BRP 117BRP 118BRP 114BRP 320BRP 116BRP 117BRP 805-1BRP 124BRP 2075

P/NDESCRIPTION

DRIVE FLANGES

Steel 3/4 Ton Drive FlangeAluminum LW WIDE 5 Drive Flange - 8 BOLTAluminum Large Bearing WIDE 5 Drive Flange - 5 BOLTAluminum Mod Lite Drive Flange - 4 on 4 1/4” or 4 1/2”Aluminum LW WIDE 5 Drive Flange - 5 BOLTAluminum Drive Flange For BRP 9380/9383 HubAluminum Drive Flange For BRP 6202 HubAluminum GN Drive FlangeAluminum Drive Flange For BRP 9401 HubAluminum 5 on 5” Drive FlangeAluminum 5 on 4 3/4” Drive FlangeDrive Flange Stud With Locknut


RED P/NDESCRIPTION123456789

1011

BLACK P/NBRP 121

BRP 343BKBRP 345BK

BRP 348BKBRP 9381

BRP 6202DBRP 805

BRP 9402WIN 1680

WIN 1680-475

FIG

BRP 337

FIG 1 FIG 2 FIG 3 FIG 4


FIG 9 FIG 10 FIG 11


HUBS & DRIVE FLANGESWHEEL STUDS

A

B

C

D

E

Rear ChevyFront Chevy

T.Q. Hubs

Front G.N. hubs & BRP 108Wide 5 HubsWheel Adaptor platesThreaded for 6 Pin Hubs1” Wheel SpacerWide 5 Hubs

Stud For BRP 861COval HeadMachined Short SplineMetric

BRP 2063BRP 2064BRP 2066BRP 2065BRP 2932BRP 2073BRP 2074BRP 2062BRP 2061BRP 2060BRP 833BRP 2058BRP 2059BRP 2072BRP 2075BRP 2078BRP 2077BRP 2057

P/NDESCRIPTION

7/16”F7/16”F1/2”F1/2”F1/2”F5/8”F5/8”F5/8”F5/8”F5/8”C5/8”C5/8”C5/8”C5/8”C5/8”C5/8”C5/8”C

12mm X 1.5mm

2 7/8”2 7/8”

3”3”

1 3/4”2 3/4”2 3/4“

3”3”

2 1/4”2”

1 7/8”2 3/4”2 3/4”3 3/4”

3”3”

1 1/2”

2 7/8”2 7/8”

3”3”

1 5/8”2 1/8”2 1/8“

2 11/16”2.550”1 3/4”1 3/8”

---2 1/8”2 1/8”3 1/8”2 1/2”2 1/2”1 1/2”

A - THREAD B - LENGTH C - LENGTH D - SPLINE E - SPLINELENGTH DRILL SIZE

.480”

.560”

.685”

.615”

.615”

.685”.685“.685”.672”.685”.500”.685”.685”.685”.685”.685”.685”.545”

.450”

.300”

.400”

.400”

.400”

.400”

.800“

.450”

.800”

.400”---

.800”

.800”

.400”

.800”

.450”

.400”

.425”

29/64”35/64”43/64”19/32”19/32”43/64”43/64“43/64”17MM43/64”

---43/64”43/64”43/64”43/64”43/64”43/64”17/32”

WHEEL NUTS

7/16”F1/2” F5/8”F5/8”C

12mm X 1.5


THREAD SIZE STEELSINGLE SIDED DOUBLE SIDED SINGLE SIDED DOUBLE SIDED

ALUMINUM

BRP 2050ABRP 2051ABRP 2051D BRP 2051AD

Spring Loaded Steel Lug Nuts (sold in packs of 5)Replacement spring and Screw (sold in packs of 5)

ALL 44108ALL 44109

P/NDESCRIPTION

PIT SOCKETS

.900” Deep Hard Coated Pit Socket with SpringReplacement Spring for BRP 204412” Pit Socket with 1 piece extension

BRP 2044BRP 2046ALL 10240

P/NDESCRIPTION

ALL 10240

BRP 2044

43/64” Drill Bit (sold each)29/64” Drill Bit (sold each)17/32” Drill Bit (sold each)35/64” Drill Bit (sold each)19/32” Drill Bit (sold each)

BRT D4364BRT D2964BRT D1732BRT D3564BRT D1932

P/NDESCRIPTION5/8”C wheel stud and lug nut kit (includes 20- BRP 2051, & 20- BRP 2072) BRP 2072KIT

P/NDESCRIPTION

BRT D4364


BRAKES & ACCESSORIES

BRP BILLET 1000 SERIES CALIPERS

1.75”1.75”

PISTON SIZE ROTOR WIDTH MOUNT CENTER

BRC 170-1516BRC 170-1526

3/8”3/8”

3.25”3.75”

RED P/N

BRC 170-1516BKBRC 170-1526BK

BLACK P/N

Replacement PartsReplacement Piston (sold each)Replacement Piston O-Ring (sold in packs of 4)Crossover O-Ring (sold in packs of 4)Bleeder Screw Assembly (sold in packs of 4)Brake Pad Retainer Pin (each)Brake Pad Retainer Pin (sold in packs of 4)Brake Pad Wear Plate (sold each)Replacement Caliper Bolt (sold each)

BRC 230-7528BRC 225-2655BRC 225-2583BRC 220-0064BRC 180-3862-1BRC 180-3862BRC 300-5875BOL 061752H

P/NDESCRIPTION


1.75”1.75”1.75”


BRC 170-4993BRC 170-4997BRC 170-4998

3/8”.810”1.25”

5.25”5.25”5.25”

RED P/N BLACK P/N

BRC 170-4993BKBRC 170-4997BKBRC 170-4998BK

Replacement Parts

Replacement Piston (sold each)Replacement Piston O-Ring (sold in packs of 4)Crossover O-Ring (sold in packs of 4)Replacement Cotter Pins (sold in packs of 4)Bleeder Screw Assembly (sold in packs of 4)Brake Pad Retainer Pin for BRC 170-4993 (sold in packs of 4)Bridge Bolt Assembly for BRC 170-4997 (comes with bolt, spacer & nut)Bridge Bolt Assembly for BRC 170-4998 (comes with bolt, spacer & nut)Brake Pad Wear Plate (sold each)Replacement Caliper Bolt for BRC 170-4993 (sold each)Replacement Caliper Bolt for BRC 170-4997 (sold each)Replacement Caliper Bolt for BRC 170-4998 (sold each)

BRC 230-7528BRC 225-2655BRC 225-2583BRC 225-0056BRC 220-0064BRC 180-3862BRC 190-4997BRC 190-4998BRC 300-5875BOL 061752HBOL 062007H BOL 062507H

P/NDESCRIPTION


1.75”1.75”1.75”


BRC 170-4088BRC 170-4090BRC 170-4100

3/8”.810”1.25”

3.5”3.5”3.5”

BRC 170-4088BKBRC 170-4090BKBRC 170-4100BK

RED P/N BLACK P/N

Replacement PartsReplacement Piston (sold each)Replacement Piston O-Ring (sold in packs of 4)Crossover O-Ring (sold in packs of 4)Bleeder Screw Assembly (sold in packs of 4)Bridge Bolt Assembly for BRC 170-4088 (comes with bolt, spacer & nut)Bridge Bolt Assembly for BRC 170-4090 (comes with bolt, spacer & nut)Bridge Bolt Assembly for BRC 170-4100 (comes with bolt, spacer & nut)Brake Pad Wear Plate (sold each)Replacement Caliper Bolt for BRC 170-4088 (sold each)Replacement Caliper Bolt for BRC 170-4090 (sold each)Replacement Caliper Bolt for BRC 170-4100 (sold each)Spacer - 2000 & 2800 calipers - from 3/8” to .810“Spacer - 2000 & 2800 calipers - from 3/8” to .810”Spacer - 2000 & 2800 calipers - from 3/8” to 1.25”Spacer - 2000 & 2800 calipers - from 3/8” to 1.25”

BRC 230-7531BRC 225-2655BRC 225-2583BRC 220-0064BRC 190-4088BRC 190-4090BRC 190-4100BRC 300-5876BOL 061752HBOL 062252H BOL 062507HBRC 180-810BRC 180-811BRC 180-125BRC 180-126

P/NDESCRIPTION

Did You Know...All BRP Calipers are machined from billet aluminum, The housingsare low profile, but strong allowing less flex and better brake feel.

They have internal crossovers for less chance of leaking!


BRAKES & ACCESSORIESWILWOOD BRAKE CALIPERS

Forged SuperLite Calipers

Forged Dynalite Calipers

1.38”1.75”

Cotter Pin

PISTON SIZE .375” .810” 1.25”REPLACEMENT

PISTONROTOR WIDTH

WIL 120-6808WIL 120-6818WIL 180-0054

WIL 120-6806WIL 120-6816WIL 180-0055

WIL 120-6804WIL 120-6814WIL 180-0056

REPLACEMENTO-RING

WIL 200-7518BRC 230-7528

WIL 130-2658BRC 225-2655

(4 pack)

(4 pack)

1.38”1.75”

Crossover TubeBridge Assembly

PISTON SIZE .810” 1.25”REPLACEMENT

PISTONROTOR WIDTH

WIL 120-11128WIL 120-11134WIL 190-5973WIL 230-7539

REPLACEMENTO-RING

WIL 200-3176WIL 200-3062

WIL 130-2658BRC 225-2655

(4 pack)

(4 pack)

WIL 120-11130WIL 120-11136WIL 190-5975WIL 220-7541

(ea)

(ea)

Replacement Bleed Screw Assembly (sold in packs of 4) WIL 220-6069P/NDESCRIPTION

Replacement Bleed Screw Assembly (sold in packs of 4)Replacement Crossover O-rings (sold in packs of 4)

BRC 220-0064BRC 225-2583

P/NDESCRIPTION

Narrow Mount DynaPro (NDP) Calipers

1.75”PISTON SIZE .375” .810”

REPLACEMENTPISTON

ROTOR WIDTH

WIL 120-9734

REPLACEMENTO-RING

BRC 230-7531 WIL 130-2655 (4 pack)WIL 120-9736 (ea)

Replacement Bleed Screw Assembly (sold in packs of 4)Replacement Crossover O-rings (sold in packs of 4)

BRC 220-0064BRC 225-2583

P/NDESCRIPTION

Dynalite Single Billet Calipers

1.75”1.75”1.75”

PISTON SIZE MOUNT HOLES P/N REPLACEMENTPISTONROTOR WIDTH

WIL 120-4062WIL 120-4060WIL 120-9689

REPLACEMENTO-RING

BRC 230-7528BRC 230-7528BRC 230-7528

BRC 225-2655BRC 225-2655BRC 225-2655

(4 pack)

(4 pack)

3/8”3/8”3/8”

3.25”3.75”

3.75” - 3 PIN (4 pack)

Replacement Bleed Screw Assembly (sold in packs of 4)Replacement Crossover O-rings (sold in packs of of 4)Replacement Brake Pad Retaining Pin (sold in packs of 4)

BRC 220-0064BRC 225-2583BRC 180-3862

P/NDESCRIPTION

BRAKE PAD SPACERS

Superlite II .250” ThickSuperlite II .500” Thick

Large GM .500” ThickLarge GM .900” Thick

BRP 1414.25BRP 1414.5

BRP 1416.5BRP 1416.9

P/NDESCRIPTION

Allen Head GM Caliper BoltHex Head GM Caliper Bolt (package of 2)

AFC 10160ALL 42080

P/NDESCRIPTION

GM CALIPER BOLTS


BRAKES & ACCESSORIESPERFORMANCE FRICTION BRAKE PADS

93 CompoundA perennial favorite among top-level

professional drivers, this compound providesconsistent high brake power output throughout

the pad’s life, from qualifying throughout the race.93 has the highest average value of torque

compared with all other compounds and hasproved popular due to its ability to stop the

quickest of vehicles under the most extremeconditions. 93 has a progressive torque curve

with a slight rise in friction within the braking event.This provides the driver with the confidence

to brake late, knowing the pad will not suffer fromfade. 93 does require an element of finesse

so as not to over-slow the car or suffer from lock-up.93 is effective throughout the temperature range.

However, cooling is recommended to avoidthermal deterioration of the disc. It has very

good wear characteristics and is lessaggressive on the discs than 83 compound.

This compound has been a favorite of CART,GTs and Winston Cup.

14 CompoundThis compound is a favorite for the short track dirt and

asphalt racers. It is the lowest torque racecompound in PFC's arsenal. It is also used as a rear

pad to reduce lock up. 14 Offers a smooth andstable high temperature torque with excellent

cold bite for dirt and asphalt racers that demandrace ready friction. 81 also offers quicker release

for unrivaled modulation with low wear and excellentdisc conditioning properties.Recommended

for low grip asphalt and dirt applications.IMCA modified, dirt late model and

street stock. 14 COMPOUND REPLACES 81.

11 CompoundReleased in 2001,this compound has increased initial bite andimproved modulation. The friction level has been increased forthe first two-thirds of the braking event, with flatter torque curve

and more linear friction curve compared to 83 and 93.This allows the driver to attack the brake pedal later, reducing

the time spent on the brakes. Very smooth release will notover-slow the car, and won't overwhelm the car's set-up.

Like 97 compound, 01 has excellent modulation characteristicsthat improve controllability and driver confidence. 01 uses PerformanceFriction’s unique lubrication package that maintains a minimal transfer

layer on the disc to help prevent brake judder and provideexcellent release properties, therefore reducing overall dragin the brake system. 01 is extremely easy on the discs with

very low wear. Effective from 167°F and reach 2000°F(75°C , reach 1100°C), optimum operating range is between

860°F and 1004°F (460°C and 540°C). 11 COMPOUND REPLACES 01

97 CompoundThis compound was designed as an all-purpose

pad where excellent controllability was a priority overultimate stopping power. Due to its excellent modulation

characteristics, this pad has proved very popular withrace schools, rallying, and as a rear pad for applications

such as touring cars. 97 has the lowest wear of allcompounds, typically providing two to three times

more life expectancy than competitors. This compound can also dramatically extend disc life.

97 is a medium torque race compound and as a result canprovide reduced brake temperatures in situations

where poor cooling can result in prematuredisc failure. 97 has the flattest torque curve of

all the Performance Friction compounds.Effective from 167°F and reach 2000°F (75°C, reach 1100°C),97 uses Performance Friction’s unique lubrication package that

maintains a minimal transfer layer on the disc to helpprevent brake judder and provide excellent release

properties, therefore reducing overall drag in the brake system. 97 is extremely easy on the discs with very low wear.

97 is now being used in Bondurant, Derek Daley,Dale Jarrett Driving Adventure, Panoz, Mid Ohio, and Jim Russell

racing schools because of it's long wear vs. performance vs. control and modulation.

03 Compound03 has higher average torque than 01. There is a slight rise of torque

with temperature to handle the most severe conditions. 03 hasexcellent release for improved modulation. Very easy on discs with

wear on par with 01. Requires finess so as to not upset oroverwhelm the car’s set-up. (Only available in in 7751 shape)

.50”

2.32”

1.98”

14 Compound97 Compound11 Compound

PFC 7757.14.12.44PFC 7757.97.12.44PFC 7757.11.12.44

P/NDESCRIPTION

Dynalite Single/BRP 1000 Series

14 Compound93 Compound97 Compound11 Compound

PFC 7752.14.12.44PFC 7752.93.12.44PFC 7752.97.12.44PFC 7752.11.12.44

P/NDESCRIPTION

Dynalite II/BRP 2000 Series

2.38”

.49”3.96”

Dynalite IIA/BRP 2800 Series

2.30”

3.96” .63”


PFC 7754.14.16.44PFC 7754.97.16.44PFC 7754.11.16.44

P/NDESCRIPTION


PFC 7751.14.20.44PFC 7751.97.20.44PFC 7751.11.20.44PFC 7751.03.20.44

P/NDESCRIPTION

Wilwood Superlite

2.43”

4.74” .80”

**All Pads sold in Axle Sets**





BRAKES & ACCESSORIESWILWOOD BRAKE PADS

Dynalite II/BRP 2000 Series

2.38 (60,5)

.49(12,4)

3.96 (100,6)


Wilwood BP10Aluminum RotorPolymatrix APolymatrix B

WIL 150-8850KWIL 15Q-6824KWIL 15A-9835KWIL 15B-3991K

P/NDESCRIPTION


Dynalite IIA/BRP 2800 Series

2.21 (56,0)

.60(15,2)

3.96 (100,6)

Wilwood BP10Polymatrix APolymatrix B

WIL 150-8946KWIL 15A-7263KWIL 15B-7264K

P/NDESCRIPTION


Wilwood Superlite

2.43 (61,7)

.80(20,3)

4.74 (120,4)

Wilwood BP10Polymatrix APolymatrix B

WIL 150-8856KWIL 15A-5735KWIL 15B-3992K

P/NDESCRIPTION


Polymatrix APolymatrix B

WIL 15A-5938KWIL 15B-5939K

P/NDESCRIPTION

Wilwood Superlite with Bridge Bolt

2.43 (61,7)

.80(20,3)

4.74 (120,4)

WILWOOD POLYMATRIX A

Wilwood Polyatrix A compound has immediate cold response withthe highest friction values at all temperatures. It is for severe dutyuse on oval tracks and road courses or any other application that

requires immediate high response at low temperatures.It has a long wear rate for severe duty, sustained high

temperature braking. It is compatiblewith all iron, steel, and titanium rotors.

HEAT RANGE: Low to X-HighCold Torque: X-HighHot Torque: X-HighWear Rate: X-Low

WILWOOD POLYMATRIX B

Wilwood Polymatrix B Compound has a slightly softer initialresponse with the same high temperature friction as “A” with a

steady rise in friction as temperature and pedal pressure increases.It has long wear for severe duty use on oval tracks and roadcourses. It also has predictable smooth engagement at all

temperatures and pedal pressures. It is compatable with all iron,steel, and titanium rotors.

HEAT RANGE: Low to X-HighCold Torque: HighHot Torque: X-HighWear Rate: X-Low

WILWOOD BP-10

Wilwood BP-10 compound is a severe duty replacement pad withincreased friction and temperature range over OE type pad

compounds. It is standard equipment in many street performancedisc conversion kits. It beds quickly and provides fast response

without excessive abrasion on vented rotors.

HEAT RANGE: Low to Med-HighCold Torque: Medium

Hot Torque: Medium-HighWear Rate: Medium

WILWOOD Q/ALUMINUM ROTORS

Wilwood Q compound is used for disc brake conversions on streetrods, muscle cars, custom show cars, and all moderate

performance applications where low noise and dust are of primaryimportance. It is best used for aluminum rotors, and is also

compatable with all vented steel rotors.

HEAT RANGE: Low to MediumCold Torque: MediumHot Torque: Medium

Wear Rate: Low


2.32 (58,9)

.50(12,7)

1.98 (50,3)


Wilwood BP10Wilwood BP 20Aluminum RotorPolymatrix APolymatrix B

WIL 150-8937KWIL 150-9765KWIL 15Q-10144KWIL 15A-10142KWIL 15B-9819K

P/NDESCRIPTION


.50”

2.32”

1.98”


Polymatrix AAluminum Rotors

WIL 15A-5733KWIL 15Q-6823K

P/NDESCRIPTION


BRAKES & ACCESSORIESG.M. BRAKE PADS


PFC 154.14.14.44PFC 154.97.14.44PFC 154.11.14.44

P/NDESCRIPTION

PFC Small G.M. (G.M. III)


PFC 052.14.14.44PFC 052.93.14.44PFC 052.97.14.44PFC 052.11.14.44

P/NDESCRIPTIONPFC Large G.M.

.67 (17,0)

.52(13,2)

4.96 (126,0)

GM "INNER" PAD

.52(13,2)

4.89 (124,2)

2.56(65,0)

GM "OUTER" PAD

GM "INNER" PAD

2.08(52,8)

.58(14,7)

5.35 (135,9)

GM "OUTER" PAD

2.41(61,2)

.52(13,2)

7.77 (197,4)

B Compound WIL 15B-3998KP/NDESCRIPTION

Wilwood Small G.M. (G.M. III)

B Compound WIL 15B-3994KP/NDESCRIPTION

Wilwood Large G.M.



BILLET ALUMINUM BRAKE HATS

BRP 2100

Multi- Pattern Billet 4 Pin Brake Hat (Midget Application)Has bolt pattern of 4 on 4”, 4 on 4.25”, and 4 on 4.5”6 on 5” Billet Brake Hat5 on 5” Billet Brake Hat6 on 5” Billet Brake Hat

BRP 2100BRP 2107BRP 2113BRP 2105

P/NDESCRIPTION OFFSET

2.25”2.5”2.5”2”

8 on 6.210”8 on 7.625”8 on 7.625”8 on 7.625”

ROTOR MOUNT

NOTE: 14 COMPOUND REPLACES 8111 COMPOUND REPLACES 01

NOTE: 14 COMPOUND REPLACES 8111 COMPOUND REPLACES 01


BRAKES & ACCESSORIESBRAKE ROTORS

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.320”

.375”

.375“

.375”

.375“

.375”

.810”

.810”

.810”

.810“

.810”

.810”

.810”

.810”

.810”

.810”

.9001.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”1.25”.320”.250“.250”.250”.250”

DESCRIPTION MATERIALO.D. WEIGHTBRP 60BRP 60DBRP 60DLBRP 61DBRP 62DBRP 63BRP 65BRP 65DBRP 65DLBRP 65WBRP 66DBRP 67BRP 83BRP 4301ABRP 4302ABRP 63ABRP 64BRP 70WIL 160-8135BRP 71WIL 160-5865WIL 160-8136WIL 160-7103WIL 160-7104PFC 299.20.0045.01PFC 299.20.0045.02BRP 72BRP 91BRP 75BRP 75HDBRP 76LBRP 76RWIL 160-8343PFC 299.32.0040.01PFC 299.32.0040.02PFC 299.32.0045.01PFC 299.32.0045.02BRP 77LBRP 77RBRP 92LBRP 92RBRP 94DBRP 8009BRP 8010BRP 8011BRP 8012

steelsteelsteelsteel steelsteelsteelsteelsteelwaved steelsteelwaved steelaluminumaluminumaluminumaluminumaluminumsteelwaved steelsteelsteelwaved steelsteelsteelsteelsteelsteelsteelsteelsteelsteelsteelwaved steelsteelsteelsteelsteelsteelsteelsteelsteelsteelwaved steelwaved steelwaved steelwaved steel

8 on 7”8 on 7”8 on 7”8 on 7.625”8 on 6.210”2” Spline3 on 5”3 on 5”3 on 5”3 on 5”5 bolt8 on 7”5 bolt2” Spline2” Spline2“ Spline3 on 5”8 on 7”8 on 7”8 on 7”8 on 7“8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7.625”8 on 7“8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7”8 on 7.625”8 on 7.625”8 on 7”8 on 7”8 on 7”4 on 3.820“4 on 3.820”4 on 4.219”4 on 4.219”

P/NTHICKNESS BOLT PATTERN DIRECTIONBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHBOTHRIGHTLEFTLEFTRIGHTBOTHBOTHBOTHBOTHLEFTRIGHTBOTHLEFTRIGHTLEFTRIGHTLEFTRIGHTLEFTRIGHTBOTHBOTHBOTHBOTHBOTH

6.00#5.12#4.52#4.60#3.75#5.30#5.55#4.80#4.46#3.90#6.05#3.88#2.55#2.05#2.60#2.34#2.30#8.35#5.36#9.05#7.95#5.96#8.70#8.70#9.00#9.00#8.85#9.25”8.75#12.50#11.55#11.55#5.72#11.55#11.55#11.55#11.55#13.00#13.00#9.55#9.55#4.75#3.00#3.00#2.80#3.60#

12”12”12”12”10.25”10”10.87”10.87”10.87”10.87”12.18”12”11”10.20”11”10“10.87”11.75”11.75“12.18”12.18“12.18”12.18”12.18”11.75”11.75”12.18”11.75“11.75”11.75”11.75”11.75”11.75”11.75”11.75”11.75”11.75”12.18”12.18”11.75”11.75”11.75”9.875“9.500”9.875”10.50”

Solid Wide 5Drilled Light Wide 5Drilled Extra Light Wide 5Drilled Light - Fits Brake HatDrilled - Fits BRP 2100 Billet HatDrilled Mini SprintSolid 6 Pin Stand / BRP Front HubsDrilled Light 6 Pin Stand / BRP Front HubsDrilled Extra Light 6 Pin Stand / BRP Front HubsWaved Drilled Light BRP Front HubsDrilled LightWaved Drilled Light Weld Style SprintLive Axle Sprint Drilled LightLive Axle Sprint Drilled LightMini Sprint6 Pin StandGM Wide 5 32 finScalloped Straight VaneWide 5 32 finWide 5 32 fin - Drilled Light Scalloped Straight VaneWide 5 Curved Vane RightWide 5 Curved Vane LeftWide 5 48 fin LeftWide 5 48 fin Right32 fin for Brake HatVentedVented 32 fin wide 5Heavy DutyCurved Vane Heavy Duty Cascar Wide 5 LeftCurved Vane Heavy Duty Cascar Wide 5 RightScalloped Straight VaneCurved Vane HD Left - uses PFC 7751 series padCurved Vane HD Right - uses PFC 7751 series padCurved Vane HD Left - uses PFC 052 series padCurved Vane HD Right - uses PFC 052 series padCurved Vane Heavy Duty Cascar Hat LeftCurved Vane Heavy Duty Cascar Hat RightCurved Vane - Lightweight LeftCurved Vane- Lightweight RightDrilled Light Wide 5Mod Lite Waved RotorMod Lite Waved RotorMod Lite Waved RotorMod Lite Waved Rotor

I.D.

2.875”2.875“3.56”3.55”

BRP 67 WIL 160-8135 BRP 75 BRP 65W

ROTOR BOLT KITS

8 - 5/16”Coarse 12 Point Bolts (large Bearing Hubs for clearance)8 - 5/16” Coarse Allen Head Bolts (Wide 5 Hubs)8 - 5/16” Coarse Bolts and Nuts (Brake Hats)3 - 1/2“ Fine X 1” Taper Head Bolts (BRP 821 & BRP 4570)26- 5/16” Coarse Bolts (Ford 9” Kit)8- Floating Rotor Tee Nuts (package of 8 bolts and 8 tee nuts)


P/NDESCRIPTION


BRAKES & ACCESSORIESALUMINUM BOLT ON CALIPER BRACKETS


FIG 5

FIG 6FIG 7

FIG 8

FIG 9FIG 10 FIG 11 FIG 12

Superlite 3/8” Thick 4 Bolt RearSuperlite 1/2” Thick 4 Bolt RearSuperlite 1/2” Thick 4 Bolt RearSuperlite 4 BoltSuperlite 4 Bolt offsetSuperlite 4 Bolt offsetDynalite II 45 degree8 Bolt Master Bracket- Steel8 Bolt Master Bracket- Aluminum3/8” offset- master to DL II 3/8” rotor8 Bolt Master to SL II8 Bolt Master to SL II8 Bolt Master to DL IILarge Bearing NDL/Superlite

BRP 1-2BRP 1-3BRP 1-4BRP 17

BRP 1X375BRP 1Y375

BRP 5BRP 6

BRP 6ABRP 25BRP 7

BRP 7-2BRP 22BRP 2

RED P/NDESCRIPTION11111117788895

OFFSETROTOR O.D.FIG

.375”

.375”

12.18”12.18”11.75”

12”12.18”12.18”12.18”

12”12.18”11.75”12.18”12.18”

Rear Spindle Caliper Mounts

Dynalite Single (3.75” Mount)Dynalite Single (3.75” Mount)

BRP 12BRP 12-250

P/NDESCRIPTION33

OFFSETROTOR O.D.FIG

.250”12”

12.18”

International Front Spindle Mount

Dynalite II / 2000 SeriesDynalite II / 2000 SeriesDynalite II / 2000 SeriesDynalite II / 2000 SeriesFits Sway-A-Way HubDynalite II / 2000 SeriesDynalite II / 2000 SeriesDynalite Single / 1000 Series- 3.25”Dynalite Single / 1000 Series- 3.25”Dynalite Single / 1000 Series- 3.25”Dynalite Single / 1000 Series- 3.25”Dynalite Single / 1000 Series- 3.25”Dynalite Single / 1000 Series- 3.75”Dynalite Single / 1000 Series- 3.75”Dynalite Single / 1000 Series- 3.75”Dynalite Single / 1000 Series- 3.75”Dynalite Single / 1000 Series- 3.75”Dynalite Single / 1000 Series- 3.75”Superlite IIADynalite Single / 1000 Series- 3.75”Use in place of BRP 18-no threaded holes3.75“ 1000 Series Left Front MountFord Spindle (BRP 9200, 9210)3.75” 1000 Series Right Front MountFord Spindle (BRP 9200, 9210) 3.75” 1000 Series Front MountLarge Bearing Spindle (BRP 4588 spindle)2000 Series Left Front MountFord Spindle (BRP 9200, 9210)2000 Series Right Front MountFord Spindle (BRP 9200, 9210)Brakeman F1 Caliper to BRP 9200, 9210

BRP 8BRP 8-1

BRP 8-1187

BRP 8-1375BRP 8-2

BRP 8-2250BRP 9

BRP 9-125BRP 10BRP 11

BRP 11-375BRP 18

BRP 18-1BRP 18-1375

BRP 18-2BRP 18-2250BRP 18-2375

BRP 21

BRP 19

BRP 26L

BRP 26R

BRP 27

BRP 28L

BRP 28RBRP 11-100

DESCRIPTION4444

4422222333333610

11

11

12

12

12

2

OFFSETROTOR O.D.FIG------

3/16”

3/8”---

1/4”---

1/8”-----

.375”-----

3/8”---

1/4”3/8”---

---

---

---

---

---

------

12.18”12”12”

12”11”

10.87”11”11“

12.18”12“12”

12.18”12”12”11”11”

10.87”12.18”

12”

10.87”

10.87”

12”

10.87”

10.87”11.75”

Ford & Large Bearing Caliper Mounts

BRP 8-1BK

BRP 8-2250BK

BRP 10BK

BRP 18BKBRP 18-1BK

BRP 18-1375BK

BRP 18-2375BK

BRP 19BK

BRP 26LBK

BRP 26RBK

BRP 27BK

RED P/N BLACK P/N

Dirt Modified Asphalt Brake Brackets

Steel Brake Bracket for .810” X 11 3/4” with 2000 series caliper(uses BRP 4588 spindle only)Steel Brake Bracket for .810” X 11 3/4” with 2800 series caliper(uses BRP 9200/9210 spindle only)1/2” Thick Aluminum Rotor Adaptor - 3 on 5” to 8 on 7”

BRP 9065

BRP 9066BRP 9067

P/NDESCRIPTION

BLACK P/N

BRP 1-2BK

BRP 1-4BK

BRP 2BK

BRP 9065

Large Bearing Caliper Mounts

3.75” Dynalite Single/BRP 1000 Series(for use with BRP 9380 hub)3.75” Dynalite Single/BRP 1000 Series(for use with BRP 9380 hub and 9384adaptor plate)

DESCRIPTION4

4

OFFSETROTOR O.D.FIG

---

---

10 7/8”

12”

BRP 9390

BRP 9382

RED P/N BLACK P/N



CLAMP ON CALIPER BRACKETSDid You Know...

These Caliper Brackets fit any3” O.D. Rear End Tube!

QUAD LOCK CALIPER BRACKETSDid You Know...

These Caliper Brackets fit Quad LockTubes Only... See page 42 for tubes and

28/29 for Birdcages.

CLAMP ON MASTER BRACKETS

Aluminum Master Clamp for 3” Tube (Bolt On)Steel Left GM Master Bracket (Bolt On)Steel Right GM Master Bracket (Bolt On)


P/NDESCRIPTION

Superlite/2800 Caliper for 12.18” RotorSuperlite/2800 Caliper for 12” RotorSuperlite/2800 Caliper for 11 3/4” RotorDynalite II/2000 Caliper for 12.18” RotorDynalite II/2000 Caliper for 12” RotorDynalite II/2000 Caliper for 11 3/4” Rotor

BRP 545BRP 545-1BRP 545-2BRP 546BRP 546-1BRP 546-2

P/NDESCRIPTION

Master Brackets

Master Bracket to Caliper Adaptor Plates

BRP 45

BRP 544

BRP 548

BRP 545

Quad Lock Bracket for BRP 2800/Superlite Caliper for 12.18” RotorQuad Lock Bracket for BRP 2800/Superlite Caliper for 12” RotorQuad Lock Bracket for BRP 2800/Superlite Caliper for 11 3/4” RotorQuad Lock Bracket for BRP 2800/Superlite Caliper for 10 7/8” Rotor

BRP 9034BRP 9038BRP 9035

RED P/NDESCRIPTION BLACK P/NBRP 9034BKBRP 9038BKBRP 9035BKBRP 9389

Clamp on Bracket for BRP 2800/Superlite Caliper for 12.18” RotorClamp on Bracket for BRP 2800/Superlite Caliper for 12” RotorClamp on Bracket for BRP 2800/Superlite Caliper for 11 3/4” Rotor

BRP 45BRP 46BRP 47

DESCRIPTIONBRP 45BKBRP 46BKBRP 47BK

RED P/N BLACK P/N

BRP 9034 BRP 9034BK

BRAKE LINE DEFLECTORS

Right front brake line deflectorLeft front brake line deflector Front mounted 1000 series caliper brake line deflector

BRP 42RBRP 42LBRP 43

RED P/NDESCRIPTIONBRP 42RBKBRP 42LBKBRP 43BK

BLACK P/NBRP 42R BRP 43

BRP 42RBK

BRP 43BK

ROTOR ADAPTORS / FLOATING ROTORS

3 Bolt to 8 on 7” Rotor Adaptor for BRP 821 Hub1/2“ Thick 3 Bolt Rotor Adaptor to 8 on 7” (for Asphalt Applications)8 on 7” Rotor Adaptor for 3 Bolt Billet Hubs (BRP 9380 / BRP 9384)**CAN ALSO USE TEE NUTS TO FLOAT ROTORS**8 on 7” Rotor Adaptor for 5 Bolt Billet Hubs (BRP 9383 / BRP 9401)**CAN ALSO USE TEE NUTS TO FLOAT ROTORS**Tee Nuts (sold in package of 8 bolts and 8 nuts)

BRP 813BRP 9067

BRP 9384

BRP 9385BRP 9386

P/NDESCRIPTION

BRP 9384

BRP 9386

BRP 9385


BRAKES & ACCESSORIESCALIPER BRACKET SPACING GUIDE

*Please Note: This table is just a guide. Some variations in calipers and rotors may cause misalignment,Always double check for proper caliper alignment.**

12.18”12.18”

12”12”

12” Waved11 3/4”11 3/4”

ROTOR WIDTH ALSO REQUIREDBRAKE BRACKET

BRP 1-2BRP 8-1BRP 1-2

1X150S, 1Y150SBRP 17BRP 1-4BRP 1-4

CALIPERROTOR DIAMETER

2 X 5/16” spacers---

2 X .800“ spacers2 X .845” spacers2 X .800“ spacers2 X 5/16” spacers2 X 5/16” spacers

BRP 71 BRP 71BRP 60DBRP 60DBRP 67

PFC 299.20.0045.01PFC 299.20.0045.01

2800 Series2000 Series2800 Series

Superlite/30002800 Series2800 Series

Superlite/3000

.810” rotor

.375” rotor

.375” rotor

.375” rotor

.375” rotor

.810” rotor

.810” rotor

ROTOR P/N

Rear Calipers- 8 Bolt Rear End

Rear Calipers- Large Bearing Rear End

12.18”12.18“

12”12“

11 3/4”11 3/4”

ROTOR WIDTH ALSO REQUIREDBRAKE BRACKET

BRP 2BRP 2

BRP 17BRP 8-1BRP 1-4BRP 1-4

CALIPERROTOR DIAMETER

2 X 1” spacers2 X .845“ spacers

---2 X 1.50” spacers

2 X 1“ spacers2 X 1” spacers

BRP 71 BRP 71BRP 60DBRP 60D

PFC 299.20.0045.01PFC 299.20.0045.01

2800 SeriesSuperlite/3000

2800 Series2000 Series2800 Series

Superlite/3000

.810” rotor

.810” rotor

.375” rotor

.375” rotor

.810” rotor

.810” rotor

ROTOR P/N OPTIONALCLAMP-ON


Front Calipers- Ford Spindle

BRP 65WBRP 67BRP 67BRP 67BRP 67BRP 71

PFC 299.20.0045.01

Top MountTop MountTop MountTop Mount

Front MountTop MountTop Mount

BRP 9390BRP 9392

BRP 19BRP 8-1187

BRP 27BRP 8

BRP 9065

BRP 9382BRP 9382

*SEE BELOW*SEE BELOW*SEE BELOW*SEE BELOW*SEE BELOW

BRC 170-1526BRC 170-1526BRC 170-1526

2000 SeriesBRC 170-1526

2000 Series2000 Series

BRP 4588/9215BRP 4588/9215BRP 4588/9215BRP 4588/9215BRP 4588/9215BRP 4588/9215BRP 4588/9215

3/8”3/8”3/8”3/8”3/8”.810”.810”

---------------

2 X BRP 693---

Front Calipers- Large Bearing Spindle

10 7/8”12“12”12“12”

12 3/16”11 3/4“

FRONT SPINDLE BRAKE BRACKETMOUNTLOCATIONCALIPERROTOR P/N HUB P/N ALSO

REQUIREDROTORWIDTH

ROTORDIAMETER ROTOR ADAPTOR

---BRP 9384

---------------

BRP 65W/65DBRP 65W/65DBRP 65W/65DBRP 65W/65DBRP 65W/65DBRP 65W/65D

BRP 71PFC 299.20.0045.01

FRONT SPINDLE BRAKE BRACKETMOUNTLOCATION

Top MountTop Mount

Front MountFront MountFront MountFront MountTop Mount Top Mount

CALIPERROTOR P/N

BRP 18-2375BRP 8-2250

Left- BRP 26LRight- BRP 26RLeft- BRP 28L

Right- BRP 28RBRP 8

BRP 9066

BRP 4570/821BRP 4570/821BRP 4570/821BRP 4570/821BRP 4570/821BRP 4570/821BRP 4570/821BRP 4570/821

BRC 170-15262000 Series

BRC 170-1526BRC 170-1526

2000 Series2000 Series2000 Series2800 Series

BRP 9200/9210BRP 9200/9210BRP 9200/9210BRP 9200/9210BRP 9200/9210BRP 9200/9210BRP 9200/9210BRP 9200/9210

HUB P/N ALSOREQUIRED

ROTORWIDTH

3/8”3/8“3/8”3/8”3/8“3/8”.810”.810”

------------------

2 X .845” spacers---

ROTORDIAMETER

10 7/8”10 7/8”10 7/8”10 7/8”10 7/8”10 7/8”

12 3/16“113/4”

ROTOR ADAPTOR

------------------

BRP 813BRP 9067

- Used primarily on Asphalt tracks and long tracks.

LIGHTWEIGHT CALIPER MOUNT BOLTS

Lightweight Aluminum Caliper Bolts for Modified Front Spindles(come with 4 sleeves, 4 washers, and 4 aluminum bolts) BRP 9136

P/NDESCRIPTION

BRP 9136

*Hub Part Numbers - BRP 6203 / BER CTD-NYM-H01 / WIN 3266F (SEE PAGE 51)


PRE BENT BRAKE LINES

Complete brake line kit with RF brake shut off valveComplete brake line kit with RF brake shut off valve - 3” driver backComplete brake line kit with RF brake shut off valve - 2” engine back

BRC 190-0415BRC 190-0426BRC 190-0436

P/NDESCRIPTION

Complete brake line kit (no shut off)Complete brake line kit (no shut off) - 3” driver backComplete brake line kit (no shut off) - 2” engine back

BRC 190-0407BRC 190-0425BRC 190-0435

P/NDESCRIPTION

** extra shipping charges will apply**

** extra shipping charges will apply**

BRAKE FLUID

AP 600 super brake fluid - 16.9 oz bottle (399 degree wet boiling point)Wilwood 570 brake fluid - 12oz bottle (284 degree wet boiling point)Wilwood EXP 600 brake fluid - 16.9 oz bottle (399 degree wet boiling point)Castrol SRF Brake Fluid - 1 liter ( 518 degree wet boiling point)

AP 600WIL 290-0632WIL 290-6209ALL 78115

P/NDESCRIPTION

Wilwood 570 brake fluid- case of 24 bottlesWilwood EXP 600 brake fluid - case of 20 bottles

WIL 290-0633WIL 290-6210

P/NDESCRIPTION

Brake Fluid - Bottles

Brake Fluid - Cases


BULK STEEL BRAKE LINE

Bulk 25 foot roll of 3/16” steel brake lineDIY Brake Line Kit for Sportsman/Modified chassis - cut and bend yourself!(can be shipped inexpensively as it comes with 1 roll of brake line)

BRP 401

BRP 407

P/NDESCRIPTION

ALL 78115AP 600WIL 290-0632WIL 290-6209

BRP 401



DIRT MODIFIED BRAKE PEDALS

STEEL BRAIDED BRAKE LINES

AN 3 Straight Both Ends

15” Long18” Long20” Long24” Long28” Long36” Long48” Long108” Long

BRP 403-15BRP 403-18BRP 403-20BRP 403-24BRP 403-28BRP 403-36BRP 403-48BRP 403-108

P/NDESCRIPTION

AN 3 Straight 1 End90 degree 1 End

15” Long18” Long24” Long

BRP 405-15BRP 405-18BRP 405-24

P/NDESCRIPTION

AN 4 Straight Both Ends

15” Long18” Long20” Long24” Long36” Long48” Long


P/NDESCRIPTION


18” Long24” Long

BRP 406-18BRP 406-24

P/NDESCRIPTION


P/NDESCRIPTION

AN 3 Straight Both EndsSEVERE DUTY - BLACK

24” Long- BLACK28” Long - BLACK

BRP 403-24HDBRP 403-28HD

P/NDESCRIPTION

Steel brake pedal for standard cage carsSteel brake pedal for 3” driver back cars3” driver back brake saddle onlyAluminum brake rod for standard cars with Wilwood/ BRP balance barAluminum brake rod for standard car with BRP new style balance barAluminum brake rod for 3” driver back car with Wilwood/BRP balance barAluminum brake rod for 3” driver back car with BRP new style balance bar

BRP 411BRP 411-3BRP 411E-3BRP 4340-12BRP 4340-13BRP 4340-9BRP 4340-10

P/NDESCRIPTION

Did You Know...A standard brake pedal will fit in a driver back car-

If more leg room is required! Just use a 12” rod for Wilwoodand BRP balance bars, and a 13” rod for new

style BRP balance bars!

PROP / RESIDUAL / SHUT OFF VALVES

Tilton lever style proportioning valveWilwood screw type proportioning valveBrake shut off valve2 # residual pressure valve (disc brakes) BLUE10 # residual pressure valve (drum brakes) RED

TIL 90-1000WIL 260-8419BRP 402WIL 260-1874WIL 260-1876

P/NDESCRIPTION

BRAKE LINE CLAMPS

Clamp For 2 1/8” Tube - Used to Clamp Brake Line To Front AxleClamp For 1 1/4” TubeClamp For 1 1/2” TubeClamp For 1 5/8” TubeClamp For 1 3/4” Tube


P/NDESCRIPTION

NOTE: These clamps have a hole in them- you can tie wrap anything to them to tidy up your race car.

BRP 411

BRP 9363 BRP 9365 BRP 9368

BRP 402

TIL 260-1874TIL 90-1000 WIL 260-8419


BRAKES & ACCESSORIESBRAKE FITTINGS

AN 3 to 1/8” NPT Straight - AluminumAN 3 to 1/8” NPT Straight - SteelAN 4 to 1/8” NPT Straight - AluminumAN 4 to 1/8” NPT Straight - Steel

AN 3 to 1/8” NPT 45° - AluminumAN 3 to 1/8” NPT 45° - SteelAN 4 to 1/8” NPT 45° - AluminumAN 4 to 1/8” NPT 45° - Steel

AN 3 to 1/8” NPT 90° - AluminumAN 3 to 1/8” NPT 90° - SteelAN 4 to 1/8” NPT 90° - AluminumAN 4 to 1/8” NPT 90° - Steel

XRP 981603XRP 481603XRP 981604XRP 481604

XRP 982303XRP 482303XRP 982304XRP 482304

XRP 982203XRP 482203XRP 982204XRP 482204

P/NDESCRIPTION3/8”-24 Inverted Flare to AN 33/8”-24 Inverted Flare to AN 4

XRP 402603XRP 402604

P/NDESCRIPTION

Brake fitting clip (4 per pack) AFC 40260P/NDESCRIPTION

*used to secure XRP 402603 & XRP 402604*

Caliper Fittings Chassis Mounts

Chassis Mount Clip

Master Cylinder Fittings

3/16” Inverted Flare to AN 3 Male3/8”-24 Male to AN 3 Male AN 3 male to AN 3 Male - LONG3/8”-24 Male to AN 4 Male7/16”-24 Male to AN 4 Male3/8”-24 Inverted Flare Male - AN 3 Male7/16”-24 Inverted Flare to AN 3 Male

TIL 73-2089-188TIL 73-2089-189TIL 73-815-3LTIL 73-2089-251XRP 402834XRP 402703XRP 402803

P/NDESCRIPTION

Brake Line Tee

3/8”-24 Inverted Flare Tee AFC 40251P/NDESCRIPTION

GM Steel Caliper Banjo Fittings

7/16” Banjo to AN 47/16” Banjo to AN 33/8” Banjo to AN 43/8” Banjo to AN 3

XRP 403844USB 7010-0010XRP 403804XRP 403803

P/NDESCRIPTION

10mm Banjo to AN 4 USB 7010-0014P/NDESCRIPTION

Small GM Metric Banjo Fitting

GM Steel Calipers

7/16” to AN 4 90° AFC 40272P/NDESCRIPTION

Brake Bleeder Valves

Brake Bleeder (sold each)Brake Bleeder Valve (pack of 4)

BRC 220-0063BRC 220-0064

P/NDESCRIPTION

GM Steel Caliper Banjo Bolt

7/16” Banjo Bolt (includes crush washer)3/8” Banjo Bolt (does not include washer)3/8” Crush Washer Only7/16” Crush Washer Only

BRP 4702XRP 494313BRP 4705BRP 4709

P/NDESCRIPTION

Small GM Metric Banjo Bolt

10mm - 1.50 Banjo10mm - 1.25 Banjo3/8” Crush Washer7/16” Crush Washer

XRP 494603AFC 40247BRP 4705BRP 4709

P/NDESCRIPTION

Steel Brake Line Nut

3/16” Brake Line (AN 3)1/4” Brake Line (AN 4)

XRP 481803XRP 481804

DESCRIPTION

1/8” NPT to 3/8”-24 Inverted Flare

Steel Brake Line Sleeve

3/16” Brake Line (AN 3)1/4” Brake Line (AN 4)

XRP 481903XRP 481904

DESCRIPTION P/N

Straight Fitting90° Fitting

BRP 400HUSB 7010-0027

DESCRIPTION P/N

Caliper/Master Cylinder Fittings

10mm-1.5 to AN 4 Steel (includes washer)10mm-1.5 to AN 3 Alum (includes washer)

XRP 425034BRP 4711

DESCRIPTION P/NP/N

Cushioned Tubing Clamps

3/16” - Package of 101/4” - Package of 103/8” - Package of 101/2” - Package of 5

XRP 810203XRP 810204XRP 810206XRP 810208

DESCRIPTION P/N

Plastic Brake Line Clamps

Plastic 3/16” Brake Line Clamp - QTY 1Plastic 3/16” Brake Line Clamp - QTY 10Plastic 3/16” Brake Line Clamp - QTY 100

LEF 116-5035-1LEF 116-5035-10LEF 116-5035-100

P/NDESCRIPTION


BRAKES & ACCESSORIESBALANCE BARS

BRP balance bar assembly complete with Wilwood compact mastercylinders (1” top front master and 7/8” bottom rear master)- comes with fill lines and reservoirsBRP balance bar assembly only

BRC 310-9085BRC 310-9070

P/NDESCRIPTIONBRP Constant Bias Balance Bar

BRP Single Pedal Balance Bar

BRP single pedal balance bar(master cylinders sold seperately)Replacement adjuster knob

BRC 310-1000BRC 310-1005

P/NDESCRIPTION

BRC 310-9085

BRC 310-1000

Wilwood Single Pedal Balance Bar

Wilwood single pedal balance bar assembly (master cylinders sold seperately) WIL 340-4630

P/NDESCRIPTION

WIL 340-4630

SLAVE CYLINDERS

Pull slave cylinderReplacement Small O-RingReplacement Large O-Ring

BRP 400NIA 110NIA 208

P/NDESCRIPTION

BRC 310-1011

Balance Bar Main Body - No BushingsPush ClevisPivot Block With Slotted EndThreaded Adjuster Pin - Detent Not IncludedShort Clevis PinE-Clips for End of 9075,9074, 9079Roller Bearing for Inside Of Pivot BlockAdjuster KnobThreaded Main Adjuster ShaftThreaded Bushing / Jam Nut for Master Cylinder Push RodsBrass Bushing (NOTE- must be replaced at factory)Detent Plunger

BRC 310-9071BRC 310-9072BRC 310-9073BRC 310-9074BRC 310-9075BRC 310-9076BRC 310-9077BRC 310-9078BRC 310-9079BRC 310-9080BRC 310-9081BRC 310-9082

P/NDESCRIPTIONReplacement Parts

Weld On Tube Only for BRC 310-1011Weld on balance bar tube assembly

BRC 310-1010BRC 310-1011

P/NDESCRIPTIONBRP Weld On Balance Bar


BRAKES & ACCESSORIESMASTER CYLINDERS

AB

C

DE

F

G

H

I

5/8” compact master cylinder assembly3/4” compact master cylinder assembly7/8” compact master cylinder assembly7/8“ compact master cylinder assembly (only 1 reservoir)1” compact master cylinder assembly1” compact master cylinder assembly (only 1 reservoir)

WIL 260-10513WIL 260-10514WIL 260-10516WIL 260-10516WIL 260-10517WIL 260-10517

P/NDESCRIPTIONWIL 260-10371WIL 260-10372WIL 260-10374WIL 260-10374BWIL 260-10375WIL 260-10375B

REBUILDKIT P/N

Assemblies come with 1 reservoir- designed for Dirt modi�eds

3/8” X 24 Outlet

Wilwood Compact Master Cylinders

5/8” remote master cylinder assembly3/4” remote master cylinder assembly7/8” remote master cylinder assembly1” remote master cylinder assembly1 1/8” remote master cylinder assembly

WIL 260-3882WIL 260-3883

P/NDESCRIPTIONWIL 260-3372WIL 260-3374WIL 260-3376WIL 260-3378WIL 260-3380

REBUILDKIT P/N

Wilwood Master Cylinders

5/8” remote master cylinder assembly3/4” remote master cylinder assembly7/8” remote master cylinder assembly1” remote master cylinder assembly1 1/8” remote master cylinder assembly

TIL 74-625RKTIL 74-750RKTIL 74-875RKTIL 74-1000RKTIL 74-1125RK

P/NDESCRIPTIONTIL 74-625UTIL 74-750UTIL 74-875UTIL 74-1000UTIL 74-1125U

REBUILDKIT P/N

Tilton Master Cylinders

Replacement Parts

3/4” conventional master cylinder assembly7/8” conventional master cylinder assembly1” conventional master cylinder assembly

USB 2011-1512KUSB 2011-1514KUSB 2011-1516K

P/NDESCRIPTIONUSB 2011-1512USB 2011-1514USB 2011-1516

REBUILDKIT P/N

US Brake Conventional Master Cylinders

A- Large reservoirB- Small reservoirC- Replacement reservoir capD- Remote bracket mountE- Replacement 24” HoseF- Reservoir clamp (sold each)G- Remote master cylinder topH- Small reservoir filterI- Large reservoir filter

TIL 74-204TIL 74-202TIL 74-207TIL 74-212TIL 74-214TIL 74-208TIL 74-200TIL 74-210TIL 74-211

P/NDESCRIPTION

5/8” girling master cylinder assembly3/4” girling master cylinder assembly

P/NDESCRIPTIONWIL 260-2636WIL 260-1304

Wilwood Girling Master Cylinders

3/8” X 24 Outlet

1/8” NPT Outlet

3/8” X 24 Outlet

1/8” NPT Outlet

Replacement Reservoir CapP/NDESCRIPTION

WIL 330-4355



BRAKE / CLUTCH PEDALS

Dual pedal- triple master cylinder hanging reverse mounted pedalDual pedal- triple master cylinder hanging forward mounted pedal

WIL 340-3342WIL 340-3950

P/NDESCRIPTION

Master Cylinders Not Included- See page 60

Wilwood Dual Pedal- Triple Master Cylinder

Single pedaldual master floor mount brake pedalSingle pedaldual master cylinder hanging mount brake pedal

WIL 340-1285WIL 340-1287

DESCRIPTION


Wilwood Single Pedal- Dual Conventional Master

Single pedaldual master cylinder long aluminum pedalSingle pedaldual master cylinder short aluminum pedal

WIL 340-5181WIL 340-5180

DESCRIPTION


Wilwood Single Pedal- Dual Master Cylinder

Single pedalsingle master cylinder floor mount clutch pedalSingle pedalsingle master cylinder hanging mount clutch pedal

WIL 340-1289WIL 340-1290

DESCRIPTION


Wilwood Single Pedal- Single Master Cylinder

Wilwood balance bar adjuster (complete as shown) WIL 340-4990DESCRIPTION

Remote Balance Bar Adjuster

P/N

P/N

P/N

P/N

BRAKE GUAGES AND PANELS

Brake bias panel with 1 1/2” liquid filled gauges REB 120-4010P/NDESCRIPTION

Quick check brake pressure gauge (screws into bleed screw) WIL 260-0966P/NDESCRIPTION



NACA DUCTS & HOSE

Clear single NACA duct (4 1/4”H X 6”D X 10 3/4”W) Black single NACA duct (4 1/4”H X 6 1/4”D X 10”W)

BRP 4215BRP 4214

P/NDESCRIPTIONSingle NACA Duct

Clear double NACA duct (4 3/4”H X 9”D X 10 3/4”W) Black double NACA duct (4 1/4”H X 9”D X 10 1/2”W)Double carbon fibre NACA duct (4 1/2”H X 12”D X 11”W)

BRP 4217BRP 4216BRP 4201

P/NDESCRIPTIONDouble NACA Duct

Headlight mount black duct (3 1/4”H X 6 1/4”D X 8 1/2”W) Single hose bumper mount duct (5 3/4”H X 5”D X 9 1/2”W)Dual hose bumper mount duct (5 1/2”H X 5”D X 9 1/2”W)Dual hose angled outlet bumper mount duct ( 4 1/2”H X 5”D X 11”W)

BRP 4218BRP 4219BRP 4220BRP 4221

P/NDESCRIPTIONBumper Mount Air Ducts

BRP 4218 BRP 4219

BRP 4220 BRP 4221

3” diameter duct hose (sold in 10 foot lengths)Replacement aluminum support ring

BRP 4225BRP 4206

P/NDESCRIPTION3” Duct Hose

Did You Know...The term “NACA” stands for National Advisory

Comittee of Aeronautics, which wasthe precursor to NASA. The NACA

duct was originally designed in 1945 foruse in military aircrafts.

BRP 4215

BRP 4214

BRP 4217

BRP 4216

BRP 4225

BRP 4206

Triple carbon fibre nose duct (4.25”H X 13”D X 11”W) BRP 4207P/NDESCRIPTION

Triple NACA Nose Duct

CLAMP ON STEEL BRACKETS

Steel Clamp On Bracket for GM CaliperSteel Clamp On Bracket for Small GM Caliper

ALL 42101ALL 42103

P/NDESCRIPTION

Did You Know...Clamp On Brackets come with stop bolts included!

These clamp on brackets are madefor 3” Tubes.

ALL 42101

ALL 42105

WELD ON CALIPER BRACKETS

Weld On Steel Small GM Rear Caliper Mount (3” Tube)Weld On Steel GM Rear Caliper Mount (3” Tube)Weld On Steel Bracket for BRP 1000 Series Caliper with 12” Rotor (3” Tube)Weld On Steel Bracket for BRP 2000 Series Caliper with 11 3/4” Rotor (3” Tube)Weld On Steel Bracket for BRP 2800 Series Caliper with 11 3/4” Rotor (3” Tube)1/4” Thick Steel Weld On Bracket for Rocket Spindle - 12” Rotor - 1000 SeriesCaliper with 3.75” Bolt Spacing


BRP 9130

P/NDESCRIPTION


SHOCKS & ACCESSORIESINTEGRA RACING SHOCKS

Aluminum “401” Stealth Series Shocks7” ALUMINUM SHOCK

- 7.0” Travel - 20.25” extended length - 13.25” collapsed length -

2C3C2C4C2C2C2C

SPECIFY

PCR 310-40170PCR 310-40170-PLUS1CPCR 310-40170-PLUS1RPCR 310-40170-MEDPCR 310-40270RF-SLICKPCR 310-40170-LF-BD1PCR 310-40170-RF-BD1PCR 310-40170-XX*

P/NDESCRIPTION4R4R5R

5.5R4R4R4R

SPECIFY

REBOUNDCOMPRESSION7” Aluminum7” Aluminum7” Aluminum7” Aluminum7” Aluminum7” Aluminum7” Aluminum7” Aluminum

PISTONLINEARLINEARLINEARLINEARLINEAR

DIGRESSIVEDIGRESSIVE

SPECIFY* Please specify valving when ordering

FRONT STD 100psiRF STD +1C 100psiLF STD +1R 100psiRF MEDIUM 150psiRF SLICK 15psiBD1 LF 100psiBD1 RF 100psiCustom Shock

9” ALUMINUM SHOCK - 9.0” Travel - 24.25” extended length - 15.25” collapsed length -

Aluminum “401” Stealth Series Coil Kit Part # BRP 9052

5.5C5.5C5C5C

4.5C5C

5.5C

6.5C4C

5.5C4C

5.5C4C

SPECIFY

PCR 310-40190L-NEPCR 310-40190LPCR 310-40190L-MEDPCR 310-40190L-TRACTIONPCR 310-40190L-BD1PCR 310-40190L-MED-DIGPCR 310-40190L-RACHEL

PCR 310-40190R-NEPCR 310-40190RPCR 310-40190R-MEDPCR 310-40190R-BD1PCR 310-40190R-MED-DIGPCR 310-40290RR-SLICKPCR 310-40190-XX*

P/NDESCRIPTION6.5R3.5R4R3R

4.5R4R3R

5.5R5R5R

4.5R5R5R

SPECIFY

REBOUNDCOMPRESSION9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum

9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum9” Aluminum

PISTONLINEARLINEARLINEAR

DIGRESSIVEDIGRESSIVEDIGRESSIVEDIGRESSIVE

LINEARLINEARLINEAR


LINEARSPECIFY

* Please specify valving when ordering

LR NEW EGYPT 150psiLR STD 150psiLR MEDIUM 150psiLR TRACTION 150psiBD1 LR 125psiLR MED DIG 150psiLR RACHEL 150psi

RR NEW EGYPT 150psiRR STD 125psiRR MEDIUM 150psiBD1 RR 125psiRR MED DIG 150psiRR SLICK 15psiCustom Shock

COMPRESSION VALVE STACKREBOUND VALVE STACK

1

2

3

4

5

6

7

8

9

10 11 12 13 12

16

17

18

19

20

21

22

2324

25

26

27

28

29

30

31

32

33

1514

28

29

30

31

32

33

**See Page 86-90 For Coil Over Kits**

Stealth Series Replacement Parts1 Retaining Ring - Spherical Bearing PCR 310-303282 Spherical Bearing PCR 310-303273 Fill Valve (O ring style) PCR 310-40TKVL0013123 Fill Valve (Pipe Thread) BRT TV4 End Cap PCR 310-303015 End Cap O-Ring PCR 310-302126 Floating Piston O-Ring PCR 310-302137 Floating Piston PCR 310-303348 Coil Over Adjuster Nut BRP 90509 7” Aluminum Body PCR 310-303079 9” Aluminum Body PCR 310-3030710 Piston Nut PCR 310-3021611 Piston Washer PCR 310-3021712 Travel Limiter PCR 310-3033513 LINEAR Piston PCR 310-3032313 DIGRESSIVE Piston PCR 310-3032214 Piston Band O-Ring PCR 310-3021515 Piston Band PCR 310-3021416 7” Piston Rod PCR 310-3031716 9” Piston Rod PCR 310-3031917 Rod Guide Primary O-Ring PCR 310-3021118 Rod Guide DU Bearing PCR 310-30300-119 Rod Guide PCR 310-3030020 Rod Guide Secondary O-Ring PCR 310-3021021 Rod Guide Main Seal (GEN 1) PCR 310-3020921 Rod Guide Main Seal (GEN 2) PCR 310-3028122 Rod Wiper Seal (GEN 1) PCR 310-3020822 Rod Wiper Seal (GEN 2) PCR 310-3028023 Coil Over Top Diaper Pin BRP 63124 Coil Over Top BRP 905125 Travel Indicator O-Ring PCR 310-3021826 Piston Rod Jam Nut BRP 782A27 Rod End Housing PCR 310-3040228 Constant Shim PCR 310-MVD59402029 Valve Disk - .700” O.D. X .010” Shim PCR 310-MVD701030 Valve Disk - .850” O.D. X .010” Shim PCR 310-MVD8501031 Valve Disk - 1.00“ O.D. X .010” Shim PCR 310-MVD101032 Valve Disk - 1.16” O.D. X .010” Shim PCR 310-MVD11601033 Valve Disk - 1.28“ O.D. X .010” Shim PCR 310-MVD128010


SHOCKS & ACCESSORIESINTEGRA RACING SHOCKS

Steel “45” Avenger Series Shocks


7” STEEL SHOCK- 7.0” Travel- 20.38” extended length - 13.38” collapsed length -

2C2C3C2C4C2C2C

SPECIFY

PCR 310-45170-LF-STD-DRTPCR 310-45170-RF-STD-DRTPCR 310-45170-PLUS1CPCR 310-45170-PLUS1RPCR 310-45170-RF-MED-DRTPCR 310-45170-LF-BD1PCR 310-45170-RF-BD1PCR 310-45170-XX*

P/NDESCRIPTION4R4R4R5R

5.5R4R4R

SPECIFY

REBOUNDCOMPRESSION7” Steel7” Steel7” Steel7” Steel7” Steel7” Steel7” Steel7” Steel




LF STD 100psiRF STD 100psiRF STD +1C 100psiLF STD +1R 100psiRF MEDIUM 150psiBD1 LF 100psiBD1 RF 100psiCustom Shock

9” STEEL SHOCK - 9.0” Travel - 24.5” extended length - 15.5” collapsed length -

Steel “45” Avenger Series Coil Kit Part # BRP 9056

5.5C5.5C5C5C

4.5C5C

5.5C

6.5C4C

5.5C4C

5.5CSPECIFY

PCR 310-45190-LR-NE-DRTPCR 310-45190-LR-STD-DRTPCR 310-45190-LR-MED-DIGPCR 310-45190=LR-TRAC-DTPCR 310-45190-LR-BD1-DRTPCR 310-45190L-MED-DIGPCR 310-45190-LR-RACH-DT

PCR 310-45190-RR-NE-DRTPCR 310-45190-RR-STD-DRTPCR 310-45190-RR-MED-DRTPCR 310-45190-RR-BD1-DRTPCR 310-45190-RR-MED-DRTPCR 310-45190-XX

P/NDESCRIPTION6.5R3.5R4R3R

4.5R4R3R

5.5R5R5R

4.5R5R

SPECIFY

REBOUNDCOMPRESSION9” Steel9” Steel9” Steel9” Steel9” Steel9” Steel9” Steel

9” Steel9” Steel9” Steel9” Steel9” Steel9” Stee

PISTONLINEARLINEARLINEAR

DIGRESSIVEDIGRESSIVEDIGRESSIVEDIGRESSIVE

LINEARLINEARLINEAR



LR NEW EGYPT 150psiLR STD 150psiLR MEDIUM 150psiLR TRACTION 150psiBD1 LR 125psiLR MED DIG 150psiLR RACHEL 150psi

RR NEW EGYPT 150psiRR STD 125psiRR MEDIUM 150psiBD1 RR 125psiRR MED DIG 150psiCustom Shock


1

2

3

4

6

7

10 11 12 13 12

16

17

18

19

20

21

22

2324

25

26

27

28

29

30

31

32

33

1514

28

29

30

31

32

33

9

17

20

5

8

Avenger Series Replacement Parts1 Retaining Ring - Spherical Bearing PCR 310-303282 Spherical Bearing PCR 310-303273 Fill Valve (O ring style) PCR 310-40TKVL0013123 Fill Valve (Pipe Thread) BRT TV4 End Cap PCR 310-450015 Coil Over Nut BRP 602BK6 Floating Piston O-Ring PCR 310-302137 Floating Piston PCR 310-303348 Coil Over Sleeve BRP 90428 Replacement Snap Ring for Coil Over BRP 90499 7” Steel Body PCR 310-450179 9” Steel Body PCR 310-4501910 Piston Nut PCR 310-3021611 Piston Washer PCR 310-3021712 Travel Limiter PCR 310-3033513 LINEAR Piston PCR 310-3032313 DIGRESSIVE Piston PCR 310-3032214 Piston Band O-Ring PCR 310-3021515 Piston Band PCR 310-3021416 7” Piston Rod PCR 310-3031716 9” Piston Rod PCR 310-3031917 Rod Guide Primary O-Ring PCR 310-3021118 Rod Guide DU Bearing PCR 310-30300-119 Rod Guide PCR 310-3022620 Rod Guide Secondary O-Ring PCR 310-3021021 Rod Guide Main Seal (GEN 1) PCR 310-3020921 Rod Guide Main Seal (GEN 2) PCR 310-3028122 Rod Wiper Seal (GEN 1) PCR 310-3020822 Rod Wiper Seal (GEN 2) PCR 310-3028023 Coil Over Top Diaper Pin BRP 63124 Coil Over Top BRP 905125 Travel Indicator O-Ring PCR 310-3021826 Piston Rod Jam Nut BRP 782A27 Rod End Housing PCR 310-3040228 Constant Shim PCR 310-MVD59402029 Valve Disk - .700” O.D. X .010” Shim PCR 310-MVD701030 Valve Disk - .850” O.D. X .010” Shim PCR 310-MVD8501031 Valve Disk - 1.00“ O.D. X .010” Shim PCR 310-MVD101032 Valve Disk - 1.16” O.D. X .010” Shim PCR 310-MVD11601033 Valve Disk - 1.28“ O.D. X .010” Shim PCR 310-MVD128010


SHOCKS & ACCESSORIESFOX RACING SHOCKS

7” ALUMINUM SHOCK WITH BASE VALVE- 7.3” Travel - 21.9” extended length - 14.6” collapsed length -

CUSTOM60C60C75C75C65C75C

FOX 983-90-007-XX*FOX 983-90-007-10FOX 983-90-007-11FOX 983-90-007-12FOX 983-90-007-13FOX 983-90-007-50FOX 983-90-007-51

P/NDESCRIPTIONCUSTOM

165R200R165R200R190R165R

REBOUNDCOMPRESSION7” Aluminum shock with base valve7” Aluminum shock with base valve7” Aluminum shock with base valve7” Aluminum shock with base valve7” Aluminum shock with base valve7” Aluminum shock with base valve7” Aluminum shock with base valve




9” ALUMINUM SHOCK WITH BASE VALVE- 9.1” Travel - 25.3” extended length - 16.2” collapsed length -

CUSTOM75C75C115C115C115C125C145C100C

FOX 983-90-009-XX*FOX 983-90-009-13FOX 983-90-009-14FOX 983-90-009-15FOX 983-90-009-16FOX 983-90-009-18FOX 983-90-009-28FOX 983-90-009-52FOX 983-90-009-53


200R230R165R200R230R165R145R200R

REBOUNDCOMPRESSION9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve9” Aluminum shock with base valve

PISTONLINEARLINEARLINEARLINEARLINEARLINEARLINEAR



TRACK 2.0 WITH NO BASE VALVE

SPECIFYSPECIFY

FOX 983-90-507-XXFOX 983-90-509-XX

P/NDESCRIPTIONSPECIFYSPECIFY

REBOUNDCOMPRESSION7” Aluminum shock 9” Aluminum shock

PISTONSPECIFYSPECIFY

Track 2.0 Aluminum Coil Over Kit part # BRP 9420

Aluminum Track Replacement Parts112345678991011121213141415161718192021222324252626

27272727272727XX - SUSTITUTE XX FOR SHIM THICKNESS - 06, 08, 10, 12, 15, 20

FOX 010-00-021FOX 802-00-008FOX 038-00-015-AFOX 001-00-025FOX 206-06-127FOX 223-00-031FOX 029-00-328FOX 241-02-086FOX 018-00-002-AFOX 222-01-047FOX 206-06-128FOX 029-03-139-AFOX 029-03-135-AFOX 207-14-045FOX 207-14-061FOX 213-01-309FOX 229-99-102FOX 229-99-120FOX 008-06-001FOX 036-02-012-AFOX 202-00-041FOX 036-01-058FOX 029-03-222-AFOX 203-00-060FOX 008-00-006FOX 002-00-000-AFOX 050-00-018FOX 050-01-000-CFOX 018-00-003-AFOX 222-07-002-AFOX 222-01-249

FOX 041-10-075-AFOX 041-XX-080-AFOX 041-XX-095-AFOX 041-XX-110-AFOX 041-XX-135-AFOX 041-XX-142-AFOX 041-XX-160-A

Shraeder Valve (small style)Shraeder Valve (large style)Retaining RingSpherical BearingBody Cap - Aluminum Shocks (gas chamber housing)Divider PistonDivider Piston O-RingBase Valve Bolt (base valve shocks only)Base Valve Nut (base valve shocks only)Base Valve (base valve shocks only)Tube Adaptor (non base valve shocks only)Tube Adaptor / Base Valve O-Ring (O.D. of adaptor)Tube O-Ring (I.D. of adaptor)7” Aluminum Body9” Aluminum BodyBearing Housing (Eye End)7” Shaft for Aluminum Shock9” Shaft for Aluminum ShockTravel IndicatorRod Wiper Seal Rod Wiper Seal HousingRod Guide U Cup SealRod Guide O-RingRod Guide HousingRod Guide Wear Plate (rubber)Teflon Piston BandPiston Reducer PlatePiston Backup PlatePiston NutLinear PistonDigressive Piston

Valve Disk - .075“ O.D. X .010” ThickValve Disk - 0.80” O.D. Valve Disk - .095” O.D.Valve Disk - 1.10” O.D.Valve Disk - 1.35” O.D.Valve Disk - 1.42” O.D.Valve Disk - 1.60” O.D.


2

4

13

5

6

8

7

9

10

12

2

32 2

15

13

16

17

22

2120

19

18

23

23

2524

COMP

REB

26

27

27

14

11

06 - .006”08 - .008”10 - .010”12 - .012”15 - .015”20 - .020”

SHIM THICKNESSCHART


SHOCKS & ACCESSORIES

11234567889101011121314141516171819202122

23232323232323XX - SUSTITUTE XX FOR SHIM THICKNESS - 06, 08, 10, 12, 15, 20

FOX 010-00-021FOX 802-00-008FOX 038-00-015-AFOX 001-00-025FOX 206-06-130FOX 223-00-020FOX 029-00-324FOX 029-03-135-AFOX 204-18-081FOX 204-18-082FOX 213-01-309FOX 229-99-100FOX 229-99-117FOX 008-06-001FOX 036-02-012-AFOX 202-00-041FOX 036-01-058FOX 029-03-222-AFOX 203-00-060FOX 008-00-006FOX 002-00-000-AFOX 050-00-018FOX 050-01-000-CFOX 018-00-003-AFOX 222-07-002-AFOX 222-01-249

FOX 041-10-075-AFOX 041-XX-080-AFOX 041-XX-095-AFOX 041-XX-110-AFOX 041-XX-135-AFOX 041-XX-142-AFOX 041-XX-160-A

Shraeder Valve (small style)Shraeder Valve (large style)Retaining RingSpherical BearingBody Cap - Steel Shocks (gas chamber housing)Divider PistonDivider Piston O-RingTube O-Ring (I.D. of adaptor)7” Steel Body9” Steel BodyBearing Housing (Eye End)7” Shaft for Steel Shock9” Shaft for Steel ShockTravel IndicatorRod Wiper Seal Rod Wiper Seal HousingRod Guide U Cup SealRod Guide O-RingRod Guide HousingRod Guide Wear Plate (rubber)Teflon Piston BandPiston Reducer PlatePiston Backup PlatePiston NutLinear PistonDigressive Piston

Valve Disk - .075“ O.D. X .010” ThickValve Disk - 0.80” O.D. Valve Disk - .095” O.D.Valve Disk - 1.10” O.D.Valve Disk - 1.35” O.D.Valve Disk - 1.42” O.D.Valve Disk - 1.60” O.D.

FOX RACING SHOCKS

Steel Track Series 2.07” STEEL SHOCK

- 7.1” Travel - 20.1” extended length - 13” collapsed length -

CUSTOM60C60C75C75C65C75C

FOX 983-91-507-XX*FOX 983-91-507-10FOX 983-91-507-11FOX 983-91-507-12FOX 983-91-507-13FOX 983-91-507-50FOX 983-91-507-51


165R200R165R200R190R165R

REBOUNDCOMPRESSION7” Steel shock7” Steel shock7” Steel shock7” Steel shock7” Steel shock7” Steel shock7” Steel shock




9” STEEL SHOCK- 8.8” Travel - 23.4” extended length - 14.6” collapsed length -

CUSTOM75C75C115C115C115C125C145C100C

FOX 983-91-509-XX*FOX 983-91-509-13FOX 983-91-509-14FOX 983-91-509-15FOX 983-91-509-16FOX 983-91-509-18FOX 983-91-509-28FOX 983-91-509-52FOX 983-91-509-53


200R230R165R200R230R165R145R200R

REBOUNDCOMPRESSION9” Steel shock9” Steel shock9” Steel shock9” Steel shock9” Steel shock9” Steel shock9” Steel shock9” Steel shock9” Steel shock

PISTONLINEARLINEARLINEARLINEARLINEARLINEARLINEAR



Track 2.0 Steel Coil Over Kit part # BRP 9418

Steel Track Replacement Parts**See Page 86-90 For Coil Over Kits**

2

4

13

5

6

7

8

2

32 2

9

11

12

13

18

17

16

15

14

19

19

2120

COMP

REB

22

23

23

10

06 - .006”08 - .008”10 - .010”12 - .012”15 - .015”20 - .020”

SHIM THICKNESSCHART



5


14 15 161312

21

1

2

3

4

7

8

69

10

11

17

18

19

20

24

23

22

7” Stroke BGT Series Aluminum Shock with Coil Over KitBase Valve Upgrade for 7” Shock

BIL BE5-C838-HO-XX**BIL B4-BOA-0000266

P/NDESCRIPTION

** Please add valving to end of part number when ordering**

BGT Series Aluminum Shocks

BGT Series

1 Retaining Ring BIL 5229302 Spherical Bearing BIL 4276013A Schrader Valve Body PEN IU023B Schrader Valve Core PEN IU043C Schrader Valve Cap PEN IU064 O-Ring - Lid BIL 5681415 Complete End Cap BIL B4-BOA-00009786 O-Ring - End Cap BIL E4-BOA-00004427 O-Ring - Floating Piston - BGT BIL E4-B60-117 O-Ring - Floating Piston - Steel/ASN BIL 420110 8 Floating Piston - BGT BIL E4-BOA-00004158 Floating Piston - Steel/ASN BIL 4540159 Coil Over Jam Nut BRP 59110 Coil Over Nut BRP 59011 7” BGT threaded body BIL E4-BOA-000073111 9” BGT threaded body BIL E4-BOA-000091412 M8 X 1.0 Metric Nut BIL 19300113 Rebound Top Out Plate BIL E4-SB1-Z039A0114 Linear Piston BIL 42317115 Compression Top Out Plate BIL B46-2216 Piston Band BIL 78004617 7” Shaft MFG NEW417 9” Shaft MFG NEW618 O-Ring - Rod Guide BIL 56822219 Rod Guide (all shocks) BIL 19311920 Coil Over Shock Top BRP 624P21 Diaper Pin BRP 63222 Travel Indicator BIL 56831023 Eye End Jam Nut BIL 51517624 Eye End BIL 193287

BGT Series Replacement Parts

7” ALUMINUM SHOCK- 7.0” Travel - 21.75” extended length - 14.75” collapsed length -

BILSTEIN BGT SHOCKS

9” Stroke BGT Series Aluminum ShockBase Valve Upgrade for 9” Shock

BIL BE5-C839-HO-XX**BIL B4-BOA-0000266

P/NDESCRIPTION



Aluminum “BGT” Series Coil Kit Part # BRP 597BK



SHOCKS & ACCESSORIESBILSTEIN ASN SERIES SHOCKS

Did You Know...All Bilstein aluminum shocks are custom

built, and therefore require greater lead time.Please allow ample time when ordering!

7” Stroke ASN Series Aluminum Shock with Coil Over Kit BIL B46-ATAL7-XX**P/NDESCRIPTION


ASN Series Aluminum Shocks

ASN Series


9” Stroke ASN Series Aluminum Shock BIL B46-ATAL9-XX**P/NDESCRIPTION



Aluminum “ASN” Series Coil Kit Part # BRP 597BK


BILSTEIN SNS SERIES SHOCKS

7” Stroke SNS Series Steel Shock (no coil kit) BIL B46-LTA7S-XX**P/NDESCRIPTION


SNS Series Steel Shocks

SNS Series


9” Stroke SNS Series Steel Shock BIL B46-LTA7S-XX**P/NDESCRIPTION



Steel “SNS” Series Coil Kit Part # BRP 614-7BK



SHOCKS & ACCESSORIESBILSTEIN STEEL BODY SHOCKS

Standard to Semi-Slick Conditions

7” 162/557” 208/559” 162/1209” 230/72

BIL B46-0210CBIL B46-0210-208/55BIL B46-0207-162/120BIL B46-0207-230/72

P/NDESCRIPTIONLFRFLRRR

Fast, Tacky, Hooked Up Conditions

7” 162/557” 230/1009” 230/1209” 270/120

BIL B46-0210CBIL B46-0210-230/100BIL B46-0207-230/120BIL B46-0207-270/120


Smooth/Glass Slick Conditions

7” 130/557” 130/559” 162/729” 230/55

BIL B46-0210-130/55BIL B46-0210-130/55BIL B46-0207-162/72BIL B46-0207-230/55


Did You Know...Custom valved shocks are also

available. Just ask your salesman formore details.

** Please Note- The above packages are guide lines.These packages can be mixed and matched for di�ering

track conditions.**

Asphalt Package

7” 300/787” 270/789” 230/789” 208/90

BIL B46-0210-300/78BIL B46-0210-270/78BIL B46-0207ABIL B46-0207-208/90


300/78270/78

230/100208/72208/55162/72162/55130/55

BIL B46-0210-300/78BIL B46-0210-270/78BIL B46-0210-230/100BIL B46-0210BBIL B46-0210-208/55BIL B46-0210-162/72BIL B46-0210CBIL B46-0210-130/55

P/NVALVING


SL Series Steel Shocks7” STEEL SHOCK

- 6.9” Travel - 20.00” extended length - 13.14” collapsed length -9” STEEL SHOCK

- 8.5” Travel - 23.44” extended length - 14.94” collapsed length -

Other Valvings Available:9” Stroke- 8.5” Travel -

- 23.44” extended length - 14.94” collapsed length -

270/120270/78

230/120230/90230/78230/72230/55

225/100220/90

208/100

BIL B46-0207-270/120BIL B46-0207-270/78BIL B46-0207-230/120BIL B46-0207-230/90BIL B46-0207ABIL B46-0207-230/72BIL B46-0207-230/55BIL B46-0207-225/100BIL B46-0207-220/90BIL B46-0207-208/100

P/NVALVING208/90208/72

162/120162/100162/90162/72162/5550/30*60/10*50/50*

BIL B46-0207-208/90BIL B46-0207BBIL B46-0207-162/120BIL B46-0207-162/100BIL B46-0207-162/90BIL B46-0207-162/72BIL B46-0207CBIL S9Z-5030BIL S9Z-6010BIL S9Z-5050

P/NVALVING

7” Stroke- 6.9” Travel -


Replacement Bilstein Coil Over Snap RingShock Eye Reducer Bushing (reduces 15MM to 1/2”)

BIL 522880BIL 423435

P/NDESCRIPTION

BILSTEIN PARTS

BIL 423435

Replacement Snap RingBIL 522880

*Indicates Digressive Valving


SHOCKS & ACCESSORIESBILSTEIN SMALL BODY SHOCKS

Replacement rod end for Bilstein small body shock (sold each)Replacement Snap Ring

BIL 193252BIL 2522870

P/NDESCRIPTION

SMALL BODY STEEL SHOCKS

1/11.5/1.5

2/22.5/2.5

3/33/14/4

AFC 1561AFC 1561.5AFC 1562AFC 1562.5AFC 1563AFC 1563-1AFC 1564

P/NVALVINGREB/COMP

1/12.5/2.5

3/34/4

AFC 1551AFC 1552.5AFC 1553AFC 1554

P/NVALVINGREB/COMP

AFCO Small Body Steel Shocks PRO Small Body Steel Shocks

125/125210/125155/155100/155210/210

PRO SB62PRO SB624PRO SB63PRO SB631PRO SB64

P/NVALVINGREB/COMP

100/100125/125155/155100/155

PRO SB51PRO SB52PRO SB53PRO SB531

P/NVALVINGREB/COMP

*Note- Also requires 2 rod endssold seperately**

*Note- Also requires 2 rod endssold seperately**

Replacement Shock End PRO B275P/NDESCRIPTION

6” Stroke

1/32/22/43/13/33/53/6

3.5/3.54/2

4.5/4.55.5/5.5

6/2

BIL S6G1030BIL S6G2020BIL S6G2040BIL S6G3010BIL S6G3030BIL S6G3050BIL S6G3060BIL S6G3535BIL S6G4020BIL S6G4545BIL S6G5555BIL S6G6020

P/NVALVINGREB/COMP

- 5.49” Travel - - 17.56” extended length - 12.07” collapsed length -



7” Stroke

1/92/22/43/13/33/5

3.5/3.54/24/4

4.5/4.55/1

5.5/5.56/2

6/3.56.5/6.57/3.58/3.59/1

BIL S7G1090BIL S7G2020BIL S7G2040BIL S7G3010BIL S7G3030BIL S7G3050BIL S7G3535BIL S7G4020BIL S7G4040BIL S7G4545BIL S7G5010BIL S7G5555BIL S7G6020BIL S7G6035BIL S7G6565BIL S7G7035BIL S7G8035BIL S7G9010

P/NVALVINGREB/COMP

- 6.87” Travel - - 20.49” extended length - 13.62” collapsed length -









Replacement Diaper Pin AFC 10157-1P/NDESCRIPTION

BIL 193252

PRO B275AFC 10157-1


SHOCKS & ACCESSORIESOEM STEEL SHOCKS CONTINUED

Did You Know...Afco stock mount shocks are designedto be OEM replacement shocks for your

race car!

1 2 3

GM Full Size & Mid Size‘70-’81 Camaro & Firebird

Ford Full & Mid Size, Merc,Montego & Cougar.

APPLICATION DESCRIPTIONEXTENDED

LENGTHCOMP.

LENGTHEx-Heavy

HeavyEx-Heavy/Medium

15 1/2”15 1/2”15 1/2”

10 1/2”10 1/2”10 1/2”

VALVING7 (50/50)6 (50/50)

7/4 (80/20)

P/NAFC 1020AFC 1021AFC 1022

FIG1

GM Full & Mid Size MalibuChevelle, Monte Carlo,GTOCutlass, Grand Prix, Regal,

Tempest, Skylark, Nova


LENGTHCOMP.

LENGTHMediumHeavy

21”21”

13”13”

VALVING5 (50/50)6 (50/50)

P/NAFC 1030AFC 1031

FIG2

All ‘70-’81 Camaro/Firebird

GM Intermediate RearCamaro ‘70-’81 Rear


LENGTHCOMP.

LENGTHMediumHeavy

Soft/HeavySoft/Heavy

22 1/2”22 1/2”

21“22 1/2”

14 1/2”14 1/2”

13“14 1/2”

VALVING5 (50/50)6 (50/50)

3/5 (40/60)3/5 (40/60)

P/NAFC 1032AFC 1033AFC 1035AFC 1034

FIG3

Front GM full & mid-size, ‘70-’81 Camaro/Firebird, Front Ford full &mid size, Mercury and CougarSame as PRO SS100 but is adjustableRear ‘70-’81 Camaro & FirebirdSame as PRO SS200 but is adjustableRear GM full and mid-size Chevelle, Monte Carlo, Cutlass, Grand Prix,GTO, Tempest, Regal and SkylarkSame as PRO SS201 but is adjustableFront ‘74-’78 Mustang II and ‘71-’80 PintoRear Mustang and Ford Full sizeRear ‘71-’80 PintoRear ‘75-’78 Mustang II

PRO SS100PRO SS100APRO SS200PRO SS200A

PRO SS201PRO SS201APRO SS300PRO SS400PRO SS401PRO SS402

P/NDESCRIPTIONPRO “SS” Series Street Stock Shocks

AFCO Street Stock Shocks

These specially designed shocks are made to replace the stock OEMunits in the original mounting locations. The “SS” series have

extra heavy damping designed for the rigors of street stock racing. There are 7 designs available and we stock them all!


SHOCKS & ACCESSORIESPRO “WB” SERIES SHOCKS

260/155210/210210/350260/260260/155315/315370/370

PRO WB935PRO WB94PRO WB946PRO WB95PRO WB953PRO WB96PRO WB97

P/NVALVINGREB/COMP

210/210210/315260/260260/155315/315315/155370/370370/480600/65

PRO WB74PRO WB746PRO WB75PRO WB753PRO WB76PRO WB763PRO WB77PRO WB78PRO WB791

P/NVALVINGREB/COMP

“WB” series shocks are an inexpensive welded bearing painted shockdesigned especially coil-over / non-coil over applications. (Can be used as a coil-over

shock or can be run up side down to save on unsprung weight). The “WB”series are offered in 7” and 9” strokes.

Call for PRO PGA and PGAC series shocks

PRO STEEL TAKE APART SHOCKS

155/155210/210210/315260/260260/155315/315315/155370/370370/480600/65

PRO TA7300PRO TA7400PRO TA7460PRO TA7500PRO TA7530PRO TA7600PRO TA7630PRO TA7700PRO TA7800PRO TA7910

P/NVALVINGCOMP/REB

155/155155/480210/210260/260260/155260/350315/315370/370370/480

PRO TA9300PRO TA9380PRO TA9400PRO TA9500PRO TA9530PRO TA9560PRO TA9600PRO TA9700PRO TA9800

P/NVALVINGCOMP/REB

Replacement Shock End PRO B200P/NDESCRIPTION










Pro WB Series Coil Kit Part # BRP 616-7BK


SHOCKS & ACCESSORIESSHOCK OIL

SHOCK INFLATION UNIT

Complete inflation unitReplacement T handle valve onlyReplacement gauge onlyLightweight shock inflation unit

PEN TL-COMPUNITPEN IU08PEN IU16BRT SG

P/NDESCRIPTION

PENSKE BUMP RUBBERS

28 gram bump rubber (RED)32 gram bump rubber (WHITE)38 gram bump rubber (BLACK)

PEN BR28PEN BR32PEN BR38

P/NDESCRIPTION

PEN TL-COMPUNIT

BRT SG

Penske Shock Oil 2.5 weight (1 quart bottle)Penske Shock Oil 5 weight (1 quart bottle)

PEN AC-OIL25QPEN AC-OIL50Q

P/NDESCRIPTION

PENSKE SHOCK OIL

Bilstein Shock Oil (Good for steel and aluminum shocks) BIL 193031P/NDESCRIPTION

BILSTEIN SHOCK OIL

Integra Shock Oil standard 3 weight (1 quart)Integra Shock Oil standard 3 weight (1 gallon)Integra Shock Oil Lightwight 0 weight (1 gallon)

PCR 310-30900-1PCR 310-30902PCR 310-30902-LW

P/NDESCRIPTION

INTEGRA SHOCK OIL

Fox Shock Oil FOX 803-11-001P/NDESCRIPTION

FOX SHOCK OIL

FOX 803-11-001 BIL 193031

PCR 310-30900-1

PCR 310-30902 PCR 310-30902-LW

PEN AC-OIL-25Q PEN AC-OIL-50Q

ACCESSORIES

Spanner WrenchHair Pin ClipLarge Diaper Pin Clip - 2 1/2” Overall LengthSmall Diaper Pin Clip - 1 3/4” Overall LengthTie Rod Shock AdaptorCoil Spring Wear Plate (goes between adjuster nut and coil spring)

PRO Z902BRP 632BRP 631AFC 10157-1BRP 671BRP 633

P/NDESCRIPTION

PEN BR28

PRO Z902

BRP 632

BRP 671

BRP 631

AFC 10157-1 BRP 633



COIL OVER SHOCK MOUNTS

BRP 9061

3/4” SMALL JACK BOLTS

3/4”F X 4” Steel Jack Bolt Assembly3/4”F X 6” Steel Jack Bolt Assembly3/4”F X 8” Steel Jack Bolt AssemblyReplacement Aluminum Shock Mount Clevis - Red AnodizedReplacement Aluminum Shock Mount Clevis - Black Anodized2 1/8” Long X 1” O.D. Steel Weld On Sleeve - (3/4”F Threads)Replacement 4” Steel Jack BoltReplacement 6” Steel Jack BoltReplacement 8” Steel Jack BoltReplacement Bolt For Attaching Clevis To Jack Bolt (3/8” X 3/4” shoulder)

BRP 9230BRP 9231BRP 9232BRP 9233BRP 9233BKBRP 9234BRP 9235BRP 9236BRP 9237BOL 060755C

P/NDESCRIPTION

BRP 9230

DOUBLE SHEAR LOWER SHOCK MOUNTS

Coil Over Shock Mount Assembly BRP 9061P/N REDDESCRIPTION P/N BLACK

BRP 9061BK

Left rear double shear lower shock mount - STD BIRDCAGE Right rear double shear lower shock mount - STD BIRDCAGELeft rear double shear lower shock mount -ADJUSTABLE BIRDCAGERight rear double shear lower shock mount - ADJUSTABLE BIRDCAGE

BRP 9079BRP 9080

P/N REDDESCRIPTION P/N BLACKBRP 9079BKBRP 9080BK

BRP 9399L

BRP 9399R

BRP 9079 BRP 9079BK

SHOCK COVERS

Black Shock Cover KIR 00041P/NDESCRIPTION

Kirkey Shock Covers - Sold In Pairs

10” - 12” Velcro Shock Cover PCR 310-30650P/NDESCRIPTION

Integra Shock Cover - Sold In Pairs

BRP 9080 BRP 9080BK

See 3/4” Small Jack Bolts For Replacement Parts

KIR 00041

PCR 310-30650

NOTE: SHOCK SOLD SEPERATELY


SHOCKS & ACCESSORIESSHOCK SLIDERS

1 1/2” Right Front Shock Slider1 1/2” Left Front Shock SliderReplacement Bolt Assembly for BRP 280R / BRP 280LOptional Screw in Stud For BRP 280R / BRP 280L1 1/2” Right Front Slider With 1 Piece Stud1 1/2” Left Front Slider With 1 Piece Stud

BRP 280RBRP 280L

BRP 9143RBRP 9143L

RED P/NDESCRIPTION BLACK P/NBRP 280RBKBRP 280LBK

BRP 9143RBKBRP 9143LBK

BRP 282BRP 4288

1 Piece Aluminum Slider

2 Piece Aluminum Slider For 1” Tubing2 Piece Aluminum Slider For 1 1/4“ Tubing2 Piece Aluminum Slider For 1 1/4“ Tubingwith redesigned stud (for faster disassembly)2 Piece Aluminum Slider For 1 1/2“ Tubing2 Piece Aluminum Slider For 1 3/4“ Tubing

BRP 287BRP 284


DESCRIPTION RED P/N BLACK P/N

BRP 284BK

BRP 4289BKBRP 286BK


1 1/4” Heavy Duty Slider BRP 9060DESCRIPTION RED P/N BLACK P/N

BRP 9060BK

Heavy Duty 2 Piece Slider

BRP 9060

BRP 284

BRP 4289

BRP 280

1 1/2” Steel Slider - Gold Zinc Plated BRP 281P/NDESCRIPTION

Steel One Piece Slider

1” Steel Slider - Gold Zinc Plated1 1/4” Steel Slider - Gold Zinc Plated

BRP 287BRP 283

P/NDESCRIPTIONSteel 2 Piece Slider

1” Slider - Red Anodized (1/2” Bolt)1” Extended Slider - Red Anodized (1/2” Bolt)1” Slider- Red Anodized (3/8” Bolt)

BRP 4180BRP 4181BRP 4173

RED P/NDESCRIPTION BLACK P/NBRP 4180BKBRP 4181BKBRP 4173BK


4” Aluminum Wedge Bolt Assembly - 1 1/8“F Thread4” Aluminum Wedge Bolt Only - 1 1/8“F Thread6” Aluminum Wedge Bolt Assembly - 1 1/8“F Thread6” Aluminum Wedge Bolt Only - 1 1/8”F ThreadReplacement Aluminum Shock Mount Only

BRP 6139BRP 6135BRP 6142BRP 6136BRP 6141A

P/NDESCRIPTIONAluminum Shaft Coil Over Wedge Bolts

6” Steel Wedge Bolt Assembly - 1 1/8“F Thread6” Steel Wedge Bolt Only - 1 1/8”F ThreadReplacement Aluminum Shock Mount Only

BRP 6142SBRP 6145BRP 6141A

P/NDESCRIPTIONSteel Shaft Coil Over Wedge Bolts

COIL OVER WEDGE BOLTS

BRP 4288

1 1/2” shock slider safety lock collar (sold in pack of 2) BRP 9047DESCRIPTION RED P/N BLACK P/N

BRP 9047BK

Shock Slider Safety CollarsBRP 9047

BRP 281

BRP 287

BRP 4181

BRP 4181BK

BRP 6136

BRP 9143RBK



HYDRAULIC WEIGHT JACK ASSEMBLIES

7/8” Stroke Weight Jack Assembly (fits threaded and smooth body2” diameter shocks) Replacement Coil RamReplacement Pump AssemblyReplacement Washer for Coil Over KitReplacement Washer for Threaded Body ShocksReplacement Knob and Shaft for Pump AssemblyReplacement Steel Braided HoseReplacement O-Ring Kit (package of 5)Adaptor Kit for 2 1/4” Spring

BRP 635BRP 636BRP 637BRP 638BRP 638TBRP 639BRP 403-108BRP 640BRP 634

P/NDESCRIPTION7/8” Stroke Weight Jack

BRP 635

BRP 635-1

Did You Know...All weight jack assemblies come pre-bled, testedand ready to install! It allows driver adjustment

from inside the cockpit while he races.

2 1/2” Stroke Weight Jack Assembly (fits threaded and smooth body2” diameter shocks)Replacement Coil RamReplacement Pump AssemblyReplacement Washer for Coil Over KitReplacement Washer for Threaded Body ShocksReplacement Knob and Shaft for Pump AssemblyReplacement Steel Braided HoseReplacement O-Ring Kit (package of 5)Adaptor Kit for 2 1/4” Spring

BRP 635-1BRP 636-1BRP 637-1BRP 638BRP 638TBRP 639BRP 403-108BRP 640BRP 634

P/NDESCRIPTION2 1/2” Stroke Weight Jack

STEEL WELD ON NUTS

BRP 5150

Steel Weld On Nut - 1 1/8”F Thread BRP 5150P/NDESCRIPTION

UNIVERSAL SHOCK MOUNTS

AFC 20137

AFC 20139

AFC 20138

Universal Shock MountUniversal Roll Cage MountUniversal Lower Arm Mount for Round Tubing

AFC 20137AFC 20139AFC 20138

P/NDESCRIPTION


COIL OVER KITSCOIL OVER KITS

KIT PART NUMBER DESCRIPTION KIT COMPONENTS

BRP 665BL

AFCO Aluminum ThreadedBody Shocks

(M2, T2, 13T Series Shocks)-Tall Taper Slotted Top

- Fits 2 1/2” Spring

BRP 666BL - Slotted TopBRP 667BL- Coil NutAFC 10243- Snap Ring

Blue Anodized

BRP 665BK




BRP 666BK - Slotted TopBRP 667BK- Coil NutAFC 10243- Snap Ring

Black Anodized

AFC 20123AFCO Small Threaded Body

Aluminum(16 series aluminum)

-Short Taper Slotted Top- Fits 1 7/8” Spring

AFC 10157-1- Diaper PinAFC 20129- Slotted TopAFC 20148- Coil NutAFC 10243 - Snap Ring

Blue Anodized

BRP 643BRP 642- Slotted TopBRP 641- 4” SleeveBRP 647- Coil NutAFC 10157-1- Diaper PinBRP 645- Snap Ring

Red Anodized

AFCO Small Body Steeland Aluminum Shocks

(15 and 16 Series Shocks)-Tall Taper Slotted Top, 4” Sleeve


SLEEVE I.D.1.675”

BRP 615BRP 599- Snap ringBRP 618- Slotted TopBRP 600A- 5” SleeveBRP 602- Coil Nut

AFCO 2” Steel Body Shocks(10 series)-5” Sleeve

-Short Taper Slotted Top- Fits 2 1/2” Spring Red Anodized Optional- BRP 598 Jam Nut

SLEEVE I.D.2.075”

BRP 615-7

Red Anodized

BRP 599- Snap ringBRP 618- Slotted TopBRP 601A- 7” SleeveBRP 602- Coil Nut

Optional- BRP 598 Jam Nut

AFCO 2” Steel Body Shocks(10 series)-7” Sleeve


SLEEVE I.D.2.075”

BRP 612BILSTEIN Steel Body Shock

(SZ,SL,SLS, & SN series)-5” Sleeve


BRP 613S- Snap ringBRP 613- Slotted TopBRP 600B- 5” SleeveBRP 602- Coil Nut

Optional- BRP 598 Jam NutRed Anodized

SLEEVE I.D.1.990”

BRP 612-7BRP 613S- Snap ringBRP 613- Slotted TopBRP 601B- 7” SleeveBRP 602- Coil Nut

BILSTEIN Steel Body Shock(SZ,SL,SLS, & SN series)

-7” Sleeve-Short Taper Slotted Top

- Fits 2 1/2” SpringOptional- BRP 598 Jam NutRed Anodized

SLEEVE I.D.1.990”

BRP 612-7BKBRP 613S- Snap ringBRP 613BK- Slotted TopBRP 601BBK- 7” SleeveBRP 602BK- Coil Nut



- Fits 2 1/2” SpringOptional- BRP 598BK Jam NutBlack Anodized

SLEEVE I.D.1.990”

BRP 665




BRP 666 - Slotted TopBRP 667- Coil NutAFC 10243- Snap Ring

Red Anodized




BRP 592BILSTEIN Aluminum Threaded

Body Shocks(BGT & ASN series)

-Tall Taper Slotted Top- Fits 2 1/2” Spring

BRP 632- Hairpin ClipBRP 624P- Slotted TopBRP 590- Coil NutBRP 591- Jam Nut

Plain

BRP 614


-5” Sleeve-Tall Taper Slotted Top


BRP 632- Hairpin ClipBRP 624- Slotted TopBRP 600B- 5” SleeveBRP 602- Coil Nut


SLEEVE I.D.1.990”

BRP 614-7




BRP 632- Hairpin ClipBRP 624- Slotted TopBRP 601B- 7” SleeveBRP 602- Coil Nut


SLEEVE I.D.1.990”

BRP 614-7BK




BRP 632- Hairpin ClipBRP 624BK- Slotted TopBRP 601BBK- 7” SleeveBRP 602BK- Coil Nut

Optional- BRP 598 Jam NutBlack Anodized

SLEEVE I.D.1.990”

BRP 658P

BILSTEIN Small BodySteel Shocks

(”SG“ series shocks)-Short Taper Top


BRP 653P- Slotted TopBRP 600R1P- SleeveBRP 647P- Coil Nut

Plain

SLEEVE I.D.1.565”

BRP 600RPBRP 600R2P- Slotted TopBRP 600R1P- SleeveBRP 647P- Coil Nut


(”SM“ series shocks )-Short Taper Top

- Fits 1 7/8” SpringPlain

SLEEVE I.D.1.565”

BRP 687BRP 670P- Flat TopBRP 600R1P- SleeveBRP 647P- Coil Nut


(”SM“ series shocks )-Non Slotted Flat Top


SLEEVE I.D.1.565”

BRP 688BRP 676P- Taper TopBRP 600R1P- SleeveBRP 647P- Coil Nut


(”SM“ series shocks )-Non Slotted Taper Top


SLEEVE I.D.1.565”

BRP 687BKBRP 670BK- Flat TopBRP 600R1BK- SleeveBRP 647BK- Coil Nut


(”SM“ series shocks )-Non Slotted Flat Top

- Fits 1 7/8” SpringBlack Anodized

SLEEVE I.D.1.565”

BRP 592BKBILSTEIN Aluminum Threaded

Body Shocks(BGT & ASN series)


BRP 632- Hairpin ClipBRP 624BK- Slotted TopBRP 590BK- Coil NutBRP 591BK- Jam Nut

Black Anodized




BRP 9052

INTEGRA Aluminum ThreadedBody Shocks

(”Stealth Series“ Shocks)-Tall Taper Slotted Top


BRP 9051 - Slotted TopBRP 9050- Coil NutBRP 631- Diaper Pin

Black Anodized

BRP 9420

Black Anodized

BRP 9416 - TopBRP 9419 - Coil NutBRP 9417 - Snap Ring

FOX Aluminum Body Shocks(2.0 Track Bulb)

-Fits shock with or without BV-Tall Taper Non Slotted Top


BRP 9418

Black Anodized

BRP 9416 - TopBRP 9415 - SleeveBRP 602BK - Coil NutBRP 9417 - Snap Ring

FOX Steel Body Shocks(2.0 Track Steel)

-Tall Taper Non Slotted Top- Fits 2 1/2” Spring

SLEEVE I.D.2.015”

BRP 9056

INTEGRA Steel Shocks“AVENGER” Series Shocks


- Fits 10“ X 2 1/2” Spring Only

BRP 9049- Top Snap RingBRP 9051- Slotted TopBRP 9042- 7” SleeveBRP 602BK- Coil NutBRP 631- Diaper PinBlack Anodized

SLEEVE I.D.1.880”

BRP 9422

Black Anodized

BRP 9049- Top Snap RingBRP 9051- Slotted TopBRP 9421- 7” SleeveBRP 602BK- Coil NutBRP 631- Diaper Pin

INTEGRA Steel Shocks“AVENGER” Series Shocks


Fits 10” and 12“ X 2 1/2” Springs

SLEEVE I.D.1.880”

88

BRP 611-7

KONI Steel Shocks(30 Series)-7” Sleeve

-Flat Slotted Top- Fits 2 1/2” Spring

BRP 609- Top Snap RingBRP 608- Slotted TopBRP 601B- 7” SleeveBRP 602- Coil Nut


SLEEVE I.D.1.990”

BRP 621KONI Steel Shocks

(30 Series)- 5” Sleeve




SLEEVE I.D.1.990”

BRP 622

KONI Steel Shocks(30 Series)- 7” Sleeve




SLEEVE I.D.1.990”

BRP 629-7

PENSKE Steel and AluminumShocks (7100, 7200,

7500 and 7600 series )-Short taper- Non Slotted Top

-7” Sleeve- Fits 2 1/2” Spring

BRP 603- TopBRP 601B- 7” SleeveBRP 602- Coil NutBRP 599- Snap Ring


SLEEVE I.D.1.990”

BRP 623

CARRERA 2” AluminumThreaded Body Shocks

(67 series)-Short Taper Slotted Top


BRP 624- Slotted TopBRP 625- Coil NutBRP 632- Hairpin ClipBRP 2008- Tie Wraps





BRP 664

Red Anodized

PRO Small Body ThreadedAluminum Shocks (ASB series)

- Short Taper Slotted Top- Fits 1 7/8” Spring

BRP 650- Slotted TopBRP 663- Coil NutBRP 2008- Tie Wraps

BRP 627

PRO 2” Aluminum ThreadedBody Shocks (AC series)-Short Taper Slotted Top

- Fits 2 1/2” SpringOptional- BRP 630 Jam Nut

BRP 604- Slotted TopBRP 625- Coil NutBRP 2008- Tie Wraps

Red Anodized

BRP 629T

Red Anodized


7500 and 7600 series )-Tall Taper- Slotted Top


BRP 626- Taper TopBRP 600B- 5” SleeveBRP 602- Coil NutBRP 599- Snap Ring


SLEEVE I.D.1.990”

BRP 629-7T

Red Anodized


7500 and 7600 series )-Tall Taper- Slotted Top


BRP 626- Taper TopBRP 601B- 7” SleeveBRP 602- Coil NutBRP 599- Snap Ring


SLEEVE I.D.1.990”

BRP 616-7BK

Black Anodized

BRP 599- Snap ringBRP 603BK- TopBRP 601ABK- 7” SleeveBRP 602BK- Coil Nut

PRO 2” Steel Big Body (Pro WB series)

-7” Sleeve-Short Taper Non-Slotted Top


SLEEVE I.D.2.075”

BRP 605PRO 2” Steel/Alum Body Shocks

(Pro A, PG, & TA series)-5” Sleeve

-Short Taper Non-Slotted Top- Fits 2 1/2” Spring

BRP 599- Snap ringBRP 603- TopBRP 600- 5” SleeveBRP 602- Coil Nut


SLEEVE I.D.2.040”

Red Anodized

BRP 605-7



PRO 2” Steel/Alum Body Shocks(Pro A, PG, & TA series)

-7” Sleeve-Short Taper Non-Slotted Top


SLEEVE I.D.2.040”

BRP 657

PRO Small Body Steel Shocks(SB series)

- Short Taper Slotted Top- 4” Sleeve


BRP 645- Snap ringBRP 650- Slotted TopBRP 646- 4” SleeveBRP 647- Coil Nut

Red Anodized

SLEEVE I.D.1.655”

BRP 662

PRO Small Body Steel Shocks(SB series)

- Short Taper Non Slotted Top- 4” Sleeve

- Fits 2 1/2” Spring Red Anodized


SLEEVE I.D.1.655”

BRP 617-7PRO 2” Steel/Alum Body Shocks

(Pro A,PG, & TA Series)-7” Sleeve




SLEEVE I.D.2.040”



BRP 6007

QA1 Threaded Body Aluminumshocks (62 series)


Red Anodized

BRP 6002- Slotted TopBRP 6000- Coil NutBRP 631- Diaper Pin2 small tie wraps

BRP 9427

Black Anodized

BIL 522880- Snap RingBRP 6002BK - Slotted TopBRP 9426- 7” SleeveBRP 602BK- Coil NutBRP 631- Diaper Pin

QA1 2” Large Body TwinTube Shocks (51 Series)

-7” Sleeve - Slotted Top


SLEEVE I.D.2.080”

BRP 660QA1/CARRERA Small Body

shocks (70 series)-4” Sleeve


BRP 645- Snap ringBRP 654- Slotted TopBRP 646- 4” SleeveBRP 647- Coil NutBRP 2008- Tie WrapsRed Anodized

SLEEVE I.D.1.655”

BRP 606Optional- BRP 598 Jam NutOptional- BRP 624 Tall TopRed Anodized

QA1/CARRERA 2” Bodyshocks (60 series)




SLEEVE I.D.2.040”

BRP 606-7

Red AnodizedOptional- BRP 598 Jam NutOptional- BRP 624 Tall Top


QA1/CARRERA 2” Bodyshocks (60 series)



SLEEVE I.D.2.040”

BRP 6005

QA1 Smooth Body Aluminumshocks (60 series)



BRP 6002- Slotted TopBRP 6004- 5” SleeveBRP 602- Coil NutBRP 631- Diaper Pin2 small tie wraps

Red Anodized

SLEEVE I.D.2.098”

BRP 6005-7

QA1 Smooth Body Aluminumshocks (60 series)



BRP 6002- Slotted TopBRP 6004-7- 7” SleeveBRP 602- Coil NutBRP 631- Diaper Pin2 small tie wrapsRed Anodized

SLEEVE I.D.2.098”

BRP 6006

QA1 Smooth Body Steelshocks (50 series)


- Fits 2 1/2” SpringRed Anodized

BRP 599- Snap RingBRP 6002- Slotted TopBRP 600- 5” SleeveBRP 602- Coil NutBRP 631- Diaper Pin2 small tie wraps

SLEEVE I.D.2.040”

BRP 672-6

Red Anodized

BRP 603- TopBRP 651-6- 7” SleeveBRP 649- Coil Nut

VRP Smooth Body(10 series)-7” Sleeve

-Non Slotted Taper Top- Fits 2 1/2” Spring

SLEEVE I.D.1.782”

BRP 9424

Black Anodized

BIL 522880- Snap RingBRP 613BK - Slotted TopBRP 9423- 9” SleeveBRP 602BK- Coil NutBRP 613S- Snap Ring

JRI 2” Steel Monotube Shocks (SL 10 & SL 13 Series)

-9” Sleeve - Slotted Top


SLEEVE I.D.1.940”


SPRINGS & ACCESSORIES1 7/8” I.D. AFCO COIL SPRINGS

AFC 29350-1

50607590105120135150175200225250

AFC 29050-1AFC 29060-1AFC 29075-1AFC 29090-1AFC 29105-1AFC 29120-1AFC 29135-1AFC 29150-1AFC 29175-1AFC 29200-1AFC 29225-1AFC 29250-1

P/NRATE275300325350375400425450475500525550

AFC 29275-1AFC 29300-1AFC 29325-1AFC 29350-1AFC 29375-1AFC 29400-1AFC 29425-1AFC 29450-1AFC 29475-1AFC 29500-1AFC 29525-1AFC 29550-1

P/NRATE1 7/8” Diameter X 10” Long

STREET STOCK SPRINGS

5 1/2” X 11” Front MetricSprings

5 1/2” X 12” Pigtail MetricRear Springs

5 1/2” X 12” CamaroFront Springs

60070080090010001100120013001400

AFC 20600-6AFC 20700-6AFC 20800-6AFC 20900-6AFC 21000-6AFC 21100-6AFC 21200-6AFC 21300-6AFC 21400-6

P/NRATE150175200225250275300

AFC 25150SSAFC 25175SSAFC 25200SSAFC 25225SSAFC 25250SSAFC 25275SSAFC 25300SS

P/NRATE800900100011001200

HYP Z0800-12HYP Z0900-12HYP Z1000-12HYP Z1100-12HYP Z1200-12

P/NRATE

Did You Know...Street stock springs are painted

black to conform to most“stock appearing” rules.For Cars NOT Using Wedge Bolts

AFC 21000-6 AFC 25225SS HYP Z0800-12

150175185200225250275300

PCR 310-2512-150MXPCR 310-2512-175MXPCR 310-2512-185MXPCR 310-2512-200MXPCR 310-2512-225MXPCR 310-2512-250MXPCR 310-2512-275MXPCR 310-2512-300MX

P/NRATE2 1/2” I.D. X 12” Long

2 1/2” I.D. INTEGRA MX SPRINGS

150175185200225250275300

PCR 310-2510-150MXPCR 310-2510-175MXPCR 310-2510-185MXPCR 310-2510-200MXPCR 310-2510-225MXPCR 310-2510-250MXPCR 310-2510-275MXPCR 310-2510-300MX


PCR 310-2512-150MX


SPRINGS & ACCESSORIES2 1/2” I.D. INTEGRA DLC COILOVER SPRINGS

2 1/2” I.D. AFCO SPRINGS

100125150175200225250275300325350375400425450475500525550575600650

AFC 23100AFC 23125AFC 23150AFC 23175AFC 23200AFC 23225AFC 23250AFC 23275AFC 23300AFC 23325AFC 23350AFC 23375AFC 23400AFC 23425AFC 23450AFC 23475AFC 23500AFC 23525AFC 23550AFC 23575AFC 23600AFC 23650


80100125150160175185200225250275300325350375400425450475500525550575600650700750800850

AFC 22080AFC 22100AFC 22125AFC 22150AFC 22160AFC 22175AFC 22185AFC 22200AFC 22225AFC 22250AFC 22275AFC 22300AFC 22325AFC 22350AFC 22375AFC 22400AFC 22425AFC 22450AFC 22475AFC 22500AFC 22525AFC 22550AFC 22575AFC 22600AFC 22650AFC 22700AFC 22750AFC 22800AFC 22850


80100110125150160175185200225250275300325350

AFC 24080AFC 24100AFC 24110AFC 24125AFC 24150AFC 24160AFC 24175AFC 24185AFC 24200AFC 24225AFC 24250AFC 24275AFC 24300AFC 24325AFC 24350


150175200225250275300325350375400

PCR 310-2512-150DLCPCR 310-2512-175DLCPCR 310-2512-200DLCPCR 310-2512-225DLCPCR 310-2512-250DLCPCR 310-2512-275DLCPCR 310-2512-300DLCPCR 310-2512-325DLCPCR 310-2512-350DLCPCR 310-2512-375DLCPCR 310-2512-400DLC


175200225250275300325350375400

PCR 310-2510-175DLCPCR 310-2510-200DLCPCR 310-2510-225DLCPCR 310-2510-250DLCPCR 310-2510-275DLCPCR 310-2510-300DLCPCR 310-2510-325DLCPCR 310-2510-350DLCPCR 310-2510-375DLCPCR 310-2510-400DLC


5/8

S P R I N G

PCR 310-2510-175DLC PCR 310-2512-175DLC

AFC 23300


SPRINGS & ACCESSORIES2 1/2” I.D. HYPERCO SPRINGS

150175200225250275300

HYP 10BO150HYP 10BO175HYP 10BO200HYP 10BO225HYP 10BO250HYP 10BO275HYP 10BO300


150175200225250275300



150175200225250275300



2 1/2” I.D. EIBACH SPRINGS

150175200225250275300

EIB 1000.250.0150EIB 1000.250.0175EIB 1000.250.0200EIB 1000.250.0225EIB 1000.250.0250EIB 1000.250.0275EIB 1000.250.0300


80100125150165175185200225250275300

EIB 1200.250.0080EIB 1200.250.0100EIB 1200.250.0125EIB 1200.250.0150EIB 1200.250.0165EIB 1200.250.0175EIB 1200.250.0185EIB 1200.250.0200EIB 1200.250.0225EIB 1200.250.0250EIB 1200.250.0275EIB 1200.250.0300


125150175200225250275300

EIB 1400.250.0125EIB 1400.250.0150EIB 1400.250.0175EIB 1400.250.0200EIB 1400.250.0225EIB 1400.250.0250EIB 1400.250.0275EIB 1400.250.0300


425450475500525

EIB 0800.250.0425EIB 0800.250.0450EIB 0800.250.0475EIB 0800.250.0500EIB 0800.250.0525


150160175185200225250275300

PCR 310-2513-150BPCR 310-2513-160BPCR 310-2513-175BPCR 310-2513-185BPCR 310-2513-200BPCR 310-2513-225BPCR 310-2513-250BPCR 310-2513-275BPCR 310-2513-300B


2 1/2” I.D. INTEGRA BARREL SPRINGS

HYP 10BO150

EIB 1000.250.0150

PCR 310-2513-160B


SPRINGS & ACCESSORIESTAKE UP SPRINGS

Integra Take Up Spring (black powder coated)Nylon SliderAluminum Slider - RED ANODIZEDAluminum Slider - BLACK ANODIZED

PCR 310-3006-005PCR 310-30400BRP 597BRP 597BK

P/NDESCRIPTION

PCR 310-3006-005 BRP 597

PCR 310-30400

MULTI-LEAF SPRINGS

Features:-Chrysler type

-made from chrome vanadium-tapered leaves

-front bushings included-teflon rub blocks

5” Arch Standard Cars5” Arch Lightweight Cars5” Arch Medium Cars5” Arch Heavy Cars5” Arch Extra Heavy Cars

AFC 20231AFC 20231LAFC 20231MHDAFC 20231HDAFC 20231XHD

P/NDESCRIPTION2400-2800#2000-2400#2600-3000#2800-3200#3100-3500#

142#102#152#166#194#

SPRING RATECAR WEIGHT

LEAF SPRING ACCESSORIES

AFC 20238

BRP 5174

AFC 20236SBRP 5169

ALL 56126

BRP 5170

Steel Leaf Spring Pivot BushingSteel Leaf Spring SliderReplacement Bearing for AFC 20236S Leaf Spring SliderAluminum Shackle Plate (2 required)Steel 2 1/2” Leaf Spring Mounting Pad (works on 3” axle tube)Leaf Spring Shackle Bolt KitReplacement Shoulder Bolt for BRP 5170Replacement Bushing for BRP 51708” U-Bolt for 3” Tubes (comes with nuts)9 1/2” U-Bolt for 3” Tubes (comes with nuts)1 1/2” Adjustable Lowering Block2 1/2” Adjustable Lowering Block

BRP 5174AFC 20236SAFC 20236S-2BRP 5169ALL 56126BRP 5170BRP 5171BRP 5172AFC 20238AFC 20238-9BRP 6160BRP 6162

P/NDESCRIPTION

BRP 6160 BRP 6162


SPRINGS & ACCESSORIESWEIGHT JACK ASSEMBLIES

4”Aluminum Wedge Bolt - 1 1/8”F6” Aluminum Wedge Bolt - 1 1/8”F8” Aluminum Wedge Bolt - 1 1/8”F6” Steel Wedge Bolt - 1 1/8”F8” Steel Wedge Bolt - 1 1/8”F1 1/8”F Thread Nut5” Steel Spring Seat5 1/2” Steel Spring Seat


P/NDESCRIPTION

BRP 6135 BRP 6155

5” Spring5 1/2” Spring

5” Spring5 1/2” Spring

5” Spring5 & 5 1/2” Spring5 & 5 1/2” Spring


P/NSPRING DIAMETER SEAT BOLTLENGTHSTEELSTEELSTEELSTEELSTEEL

ALUMINUMALUMINUM

6”6”8”8”8”6”8”

STEELSTEELSTEELSTEEL

ALUMINUMALUMINUMALUMINUM

Standard Weight Jack Assemblies

Replacement Weight Jack Parts

CONVENTIONAL WEIGHT JACK ASSEMBLIES

Did You Know...These weight jack assemblies use

1 1/8”F jack bolts and areused for 5” and 5 1/2” springs.

1”C X 8” Long Steel Wedge Bolt1”C X 11” Long Steel Wedge BoltWeld on Adjuster PlateSpring Cup

BRP 6130BRP 6131BRP 6133ALL 56114

P/NDESCRIPTION

BRP 6133ALL 56114

BRP 6130

COIL SPRING ADJUSTERS & SPACERS

Did You Know...These weight jacks are made for

conventional spring type cars using1”C weight jack bolts.

BRP 5151

BRP 5157

BRP 5156

5” or 5 1/2” Coil Spring Spacer (I.D. open for stock mount racing) ALL 56116P/NDESCRIPTION

5” or 5 1/2” Coil Spring Adjustable Spring Spacer (has 2” travel)Replacement Nut

BRP 5151BRP 5151B

P/NDESCRIPTION

5” or 5 1/2” Coil Spring Bucket (works with any 1 1/8”F jack bolt) BRP 5157P/NDESCRIPTION

Rear Spring Seat (mounts 5 or 5 1/2” springs on rear axle tube) ALL 56124P/NDESCRIPTION

ALL 56116


WHEELS & ACCESSORIES15” WIDE 5 STEEL WHEELS

Steel Wide 5 Non-Bead Lock Wheels

10”10”

12”12”

13”13”13”

14”14”

BRW 10M4BRW 10M5

BRW 12M3BRW 12M5

BRW 13M3BRW 13M4BRW 13M5

BRW 14M4BRW 14M5

P/NWHEEL WIDTH BACKSPACING WEIGHT

4”5”

3”5”

3”4”5”

4”5”

19#19#

21#21#

23#23#23#

24#24#

Steel Wide 5 Bead Lock WheelsBEAD LOCKS NOT INCLUDED

10”10”10”

12”12”

13”13”13”

14”14”14”

BRW 10M3BBRW 10M4BBRW 10M5B

BRW 12M3BBRW 12M5B




3”4”5”

3”5”

3”4”5”

3”4”5”

21#21#21#

24#24#

25#25#25#

26#26#26#

Steel Wide 5 Bead Lock WheelsBRP 32 BEAD LOCK INCLUDED

10”10”10”

12”12”12”

13”13”13”

14”14”14”

BRW 10M3BLBRW 10M4BLBRW 10M5BL





3”4”5”

3”4”5”

3”4”5”

3”4”5”

22#22#22#

25#25#25#

26#26#26#

27#27#27#

See Page 98 for Bead Locks

See Page 98 for Replacement Beadlocks

See Page 99 for Aero Wheels


WHEELS & ACCESSORIESWELD ALUMINUM WHEELS

Aluminum Wide 5 Non-Beadlock Wheels

10”10”

12”12”12”

13”13”13”

14”14”14”

WEL 570-5014WEL 570-5015

WEL 571-5214WEL 571-5215WEL 571-5216

WEL 571-5313WEL 571-5314WEL 571-5315

WEL 571-5413WEL 571-5414WEL 571-5415


4”5”

4”5”6”

3”4”5”

3”4”5”

11.54#11.57#

13.41#13.44#13.44#

14.10#14.12#14.15#

14.12#14.58#14.91#

Aluminum Wide 5 Wheel - Weld BeadlocksWELD BEADLOCK INCLUDED - Weld Bolt Pattern

10”10”

12”12”12”

13”13”13”

14”14”14”

WEL 570-5024MWEL 570-5025M

WEL 571-5223MWEL 571-5224MWEL 571-5225M

WEL 571-5323MWEL 571-5324MWEL 571-5325M

WEL 571-5423MWEL 571-5424MWEL 571-5425M


4”5”

3”4”5”

3”4”5”

3”4”5”

12.98#12.90#

14.67#14.74#14.78#

15.43#15.46#15.48#

15.46#15.92#16.24#

Aluminum Wide 5 Wheel - BRP BeadlockBEAD LOCKS NOT INCLUDED - BRP Bolt Pattern

10”10”

12“12”12“

13”13”13”

14”14”14”

WEL 10M4ABWEL 10M5AB

WEL 12M4ABWEL 12M5ABWEL 12M6AB




4”5”

4“5”6“

3”4”5”

3”4”5”

12.60#12.60#

13.60#13.60#13.60#

14.40#14.40#14.40#

15.00#15.00#15.00#

See Page 98 for Beadlocks

WELD ALUMINUM WHEELS - BRP BEADLOCKS

-special order only** THESE WHEELS HAVE WELD BEAD LOCKS INSTALLED. THE BEADLOCKS ARE WELD BOLT PATTERN**

** THESE WHEELS HAVE BRP BEAD LOCKS INSTALLED. THE BEADLOCKS ARE BRP BOLT PATTERN**

WELD REPLACEMENT BEAD LOCK RING - WEL 650-5314M


WHEELS & ACCESSORIESBEAD LOCK RINGS

1/4” Red Anodized Billet Ring (fits BRP & Reds Wheels)1/4” Black Anodized Billet Ring (fits BRP & Reds Wheels)1/4” Plain Aluminum Billet Ring (fits BRP & Reds Wheels)1/2” Red Anodized With Countersunk Holes (fits BRP & Reds Wheels)1/2” Plain Aluminum With Countersunk Holes (fits BRP & Reds Wheels)1/2” Black Anodized With Countersunk Holes (fits BRP & Reds Wheels)

BRP 32BRP 32BKBRP 32PBRP 32CBRP 32CPBRP 32CBK

P/NDESCRIPTION

BRP 32

BRP 32WP

BRP 32-1

BRP 32-1WBK

BRP 32-2 BRP 33

BRP 32C

Red Anodized Billet Ring (fits BRP, Reds, & Weld Wheels)Plain Aluminum Billet Ring (fits BRP, Reds, & Weld Wheels)Red Anodized With Tabs for Cover (fits BRP, Reds, & Weld Wheels)Plain Aluminum With Tabs for Cover (fits BRP, Reds & Weld Wheels)Black Anodized With Tabs for Cover (fits BRP, Reds, & Weld Wheels)

BRP 32WBRP 32WPBRP 32-1WBRP 32-1WPBRP 32-1WBK

P/NDESCRIPTION

Single Drilled Outer Bead Lock Rings

1/4” Thick Double Drilled Outer Bead Lock Rings

1/4” Thick Red Anodized Billet Ring with tabs for BRP 33 Lexan Cover(fits BRP & Reds Wheels)1/4” Thick Plain Aluminum Billet Ring with tabs for BRP 33 Lexan Cover(fits BRP & Reds Wheels)1/4” Thick Black Aluminum Billet Ring with tabs for BRP 33 Lexan Cover(fits BRP & Reds Wheels)

BRP 32-1

BRP 32-1P

BRP 32-1BK

P/NDESCRIPTION

BRP 32-1P

1/4”Thick Single Drilled Outer Bead Lock Rings with Tabs

Red Anodized Solid Outer Mud Lock Ring (fits BRP, Reds & Weld Wheels)Plain Aluminum Solid Outer Mud Lock Ring (fits BRP, Reds & Weld Wheels)

BRP 32-2BRP 32-2P

P/NDESCRIPTION1/4” Double Drilled Mud Lock Bead Lock Rings

Lexan Covers

Clear Lexan Cover for use on BRP 32-1, BRP 32-1P, BRP 32-1W, &BRP 32-1WP

BRP 33P/NDESCRIPTION

BEAD LOCK ASSEMBLIES

Did You Know...Double drilled bead locks fit both BRP and Weld

bolt patterns. They have both bolt patternsdrilled so they fit every wheel!

22 Bolt Drag Race Beadlocks

Complete Beadlock Kit for Aluminum Wheel(comes with BRP 31, BRP 32 & BRP 39)Aluminum Wheel Inner Beadlock Only - 3/8”Steel Wheel Inner Beadlock Ring Only5/16”C Beadlock bolt and washer kitfor 16 Bolt Beadlocks5/16”C X 1 1/4” 12 Point Drag RaceBeadlock Bolt Kit for 16 Bolt BeadlockAluminum Wheel Inner Beadlock Only - 1/2”

BRP 30BRP 31BRP 34

BRP 39

BRP 39-1BRP 31R

P/NDESCRIPTIONBeadlock Assemblies


WHEELS & ACCESSORIESAERO RACING WHEELS

EXAMPLE: AER 52-085040AERO LINE CODE

RIM DIAMETER3 = 13”5 = 15”

RIM TYPE0 = Standard Rolled

1 = Spun Light2= Rolled Light IMCA

3 = Rolled Light Beadlock5 = Special Rolled

8 = Special Rolled Light9 =Sprint Cup

RIM COLOUR0 = Silver1 = Black

2= Chrome

RIM WIDTH0 = 10”4 = 14”5 = 15”6 = 6”7 = 7”8 = 8”9 = 9”

BOLT CIRCLE45 = 5 on 4.5”47 = 5 on 4.75”

50 = 5 on 5”05 = Wide 540 = 4 on 4”

42 = 4 on 4.25”45 = 4 on 4.5”

BACK SPACING1 = 1”2 = 2”3 = 3”4 = 4”5 = 5”

BACK SPACING HALF SIZES0 = 0

1 = 1/8”5 = 1/2”

50 Series - 15” Standard Rolled

AER 50-074720AER 50-174720AER 50-084720AER 50-084730AER 50-084735AER 50-084740AER 50-284720AER 50-284730AER 50-284740AER 50-084530AER 50-184720AER 50-184730AER 50-184740

P/NRim Type Width Bolt Circle

silverblacksilversilversilversilver

chromechromechromesilverblackblackblack

21#21#24#24#24#24#24#24#24#24#24#24#24#

WeightColor

2”2”2”3”

3 1/2“4”2”3”4”3”2”3”4”

Offset

5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”5 on 4 3/4“5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”5 on 4 1/2”5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”

7”7”8”8”8”8“8”8”8”8”8”8”8”

Standard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard RolledStandard Rolled

58 Series - 15” Rolled Light

AER 58-004730AER 58-004740AER 58-204730AER 58-204720


silversilver

chromechrome

22#22#22#22#

WeightColor

3”4”3”2”

Offset

5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”

10”10”10”10”

Rolled LightRolled LightRolled LightRolled Light

51 Series - 15” Spun Light

AER 51-100520AER 51-100530AER 51-100540AER 51-100550


blackblackblackblack

18#18#18#18#

WeightColor

2”3”4”5”

Offset

Wide 5Wide 5Wide 5Wide 5

10”10”10”10”

Spun LightSpun LightSpun LightSpun Light

53 Series - 15” Rolled Light Beadlock

AER 53-004730AER 53-204730AER 53-004740


silverchromesilver

26#26#26#

WeightColor

3”3”4”

Offset

5 on 4 3/4”5 on 4 3/4”5 on 4 3/4”

10”10“10”

Rolled Light BeadlockRolled Light BeadlockRolled Light Beadlock

52 Series - 15” Rolled Light IMCA

AER 52-084710AER 52-084720


silversilver

19#19#

WeightColor

1”2”

Offset

5 on 4 3/4”5 on 4 3/4”

8”8”

Rolled LightRolled Light

30 Series - 13” Standard Rolled

33 Series - 13” Rolled Light Beadlock

15” Yellow Outer Beadloock Ring15” Chrome Outer Beadlock Ring13” Yellow Outer Beadlock Ring13” Black Outer Beadlock Ring

AER 54-500002AER 54-500004AER 54-500019AER 54-500032

P/NDESCRIPTIONSteel Outer Beadlock Rings

AER 54-500004

AER 54-500005Rim Straightening Wrench AER 54-500005

P/NDESCRIPTIONAero Rim Wrench

8” - Street Stock10” - Pro Stock

AER 30-074520AER 30-274520


silverchrome

17#17#

WeightColor

2”2”

Offset

4 on 4 1/2”4 on 4 1/2”

7”7”

Standard RolledStandard Rolled

AER 33-274520AER 33-074520


chromesilver

20#20#

WeightColor

2”2”

Offset

4 on 4 1/2”4 on 4 1/2”

7”7”

Rolled Light BeadlockRolled Light Beadlock


WHEELS & ACCESSORIESWIDE 5 WHEEL ADAPTORS

2” Pilot hole Blank to Wide 55 on 5 1/2” to Wide 56 on 5” to Wide 5 6 on 5 1/2” to Wide 5 8 on 6 1/2” to Wide 5 5 on 4 1/2” to Wide 55 on 4 3/4” to Wide 55 on 5” to Wide 5

Replacement Wheel Stud


BRP 2060

P/NDESCRIPTION

BRP 138BRP 139

BRP 140


3/8” Plain Aluminum Wide 5Wheel Adaptors

5 on 5” to Wide 56 on 5” to Wide 5Lightweight 6 on 5” to Wide 5Lightweight 5 on 4 1/2”, 5 on 4 3/4” & 5 on 5” Multi-Holeadaptor to Wide 56 on 5 1/2” to Wide 55 on 5 1/2” to Wide 5

Replacement Wheel Stud



BRP 2060

P/NDESCRIPTION

1/2” Red Anodized Wide 5Aluminum Wheel Adaptors

BRP 131

BRP 129BRP 132

BRP 128BRP 133

5/8” Red Anodized Wide 5Aluminum Wheel Adaptors

6 on 5” to Wide 5 BRP 135P/NDESCRIPTION

6 ON 5” / 5 ON 5” WHEEL SPACERS

1/2” Thick3/8” Thick1/4” Thick5/16” Thick

BRP 149BRP 150BRP 150-2BRP 150-3

P/NDESCRIPTION

Did You Know...These wheel spacers will work on both

6 on 5” and 5 on 5” boltpatterns!


WHEELS & ACCESSORIESWIDE 5 WHEEL SPACERS

1/4” Thick Wide 5 Spacer3/8” Thick Wide 5 Spacer1/2” Thick Wide 5 Spacer

1/4” Thick Spacer (sold each) 5 required per wheel


BRP 768

P/NDESCRIPTIONBillet Aluminum Wheel Spacers

BRP 152

BRP 153BRP 156

BRP 155

1” Wide 5 Aluminum Wheel Spacer1 1/2” Wide 5 Aluminum Wheel Spacer2” Wide 5 Aluminum Wheel Spacer

1“ Wide 5 Wheel Spacer (includes 5 shortenedstuds for hub when 10 hole wheel is used)


BRP 153

P/NDESCRIPTION WEIGHT3.4#4.8#4.7#

3.4#

Billet Aluminum Wheel Spacers

BRP 768

WIL 270-2189C 2” Wide 5 Wheel Spacer WIL 270-2189CP/NDESCRIPTION

Wilwood Aluminum Wheel Spacer

FOAM MUD PLUGS

5” Thick Black Foam5” Thick Red Foam5” Thick Blue Foam

ALL 44150ALL 44151ALL 44152

P/NDESCRIPTION

ACCESSORIES

Brass Valve Stem5/16”C Bolt Kit (16 grade 8 bolts and washers)Tire Tape Measure

BRP 41BRP 39BRP 40

P/NDESCRIPTION

BRP 39BRP 41 BRP 40


PLUMBING & FITTINGSXRP PUSH ON HOSE AND FITTINGS

Blue Push On Hose

#4 Push On Hose#6 Push On Hose#8 Push On Hose#10 Push On Hose#12 Push On Hose

XRP 340004XRP 340006XRP 340008XRP 340010XRP 340012

P/NDESCRIPTION HOSE I.D.1/4”3/8”1/2”5/8”3/4”

SOLD BY THE FOOT

Hose Tech Specs

#4#6#8#10#12

SIZE HOSE I.D.

.250”

.375”

.500”

.625”

.750”

HOSE O.D. MAX OPERATINGPSI

.500”

.620”

.750”

.900”1.030”

250#250#250#250#250#

BURST PRESSUREPSI

1000#1000#1000#1000#1000#

BEND RADIUS

3”3”5”6”7”

Aluminum Straight

4681012


P/NSIZE68

1012

XRP 234506XRP 234508XRP 234510XRP 234512

P/NSIZE468

1012


P/NSIZE68

1012

XRP 231206XRP 231208XRP 231210XRP 231212

P/NSIZEAluminum 45° Aluminum 90° Aluminum 120°

Brass Straight

6810

XRP 240006XRP 240008XRP 240010

P/NSIZE68

10

XRP 249006XRP 249008XRP 249010

P/NSIZESteel 90° Brass Male NPT

1/4” NPT3/8” NPT3/8” NPT1/2” NPT1/2” NPT


P/NTHREAD SIZE HOSE SIZE6688

10

68

1012

XRP 231506XRP 231508XRP 231510XRP 231512

P/NSIZEAluminum 150°


PLUMBING & FITTINGSXRP STEEL BRAID HOSE AND FITTINGS

Stainless Steel Braided Hose

#4 Braided Hose#6 Braided Hose#8 Braided Hose#10 Braided Hose#12 Braided Hose#16 Braided Hose

XRP 300004XRP 300006XRP 300008XRP 300010XRP 300012XRP 300016

P/NDESCRIPTION HOSE I.D.7/32”11/32”7/16”9/16”11/16”7/8”

SOLD BY THE FOOT

Hose Tech Specs

Straight

468101216


P/NSIZE68

101216


P/NSIZE468

101216


P/NSIZE68

101216


P/NSIZE45° 90° 120°

#4#6#8#10#12#16

SIZE HOSE I.D.

.219”

.344”

.438”

.562”

.688”

.875”


.438”

.547”

.641”

.797”

.928”1.156”

1500#1500#1250#1250#1000#750#

BURST PRESSUREPSI

6000#6000#5000#5000#4000#3000#

BEND RADIUS

2”2.5”3.5”4”

4.5”5.5”

150°

68

101216


P/NSIZE180°

68101216


P/NSIZE68

1012

XRP 320206XRP 320208XRP 320210XRP 320212

P/NSIZEXRP Fire Sleeve


PLUMBING & FITTINGSXRP HS-79 LITEWEIGHT HOSE & FITTINGS

Straight

68

101216


P/NSIZE30° 45° 60°

68

101216


P/NSIZE68

101216


P/NSIZE68

101216


P/NSIZE

90°

68

101216


P/NSIZE120° 150° 180°

68

101216


P/NSIZE68

101216


P/NSIZE68

101216


P/NSIZE

HS-79 4 Ply Ultra Light Hose

#6 HS-79 Hose#8 HS-79 Hose#10 HS-79 Hose#12 HS-79 Hose#16 HS-79 Hose


P/NDESCRIPTION HOSE I.D..375”.500”.625”.750”1.00”

SOLD BY THE FOOT

Hose Tech Specs

#6#8#10#12#16

SIZE HOSE I.D.

.375”

.500”

.625”

.750”1.00”


.550”

.680”

.810”.9501.20”

600#600#400#400#200#

BURST PRESSUREPSI

2400#2400#1600#1600#800#

BEND RADIUS

.75”1.00”1.25”1.5”2.00”

NOTE: REQUIRES CRIMPING DEVICE TO COMPLETE HOSES

HS-79 Crimp Collars

68

101216


P/NSIZE


PLUMBING & FITTINGS

Length of Assembly

Length of Assembly

Length of Assembly

Length ofAssembly

Length of Assembly

Length of Assembly

How To Measure Fitting AngleHow To Measure Fitting AngleTo measure the angular rotation of hose�ttings, place the �tting nearest you atposition 0° (see illustration at right).Measure counter-clockwiseto the desiredposition of the rear �tting. If the anglebetween �ttings desired is position 0° toposition 0°, specify 000. For example, thisillustration shows a 270° angle.

Front FittingPosition 0°

90°270°

180°

Angle in DegreesMeasured Counter clockwise

Rear Fitting

Length of Assembly

XRP HS-79 CUSTOM HOSE LENGTHSXRP HS-79 ultra light hoses are available crimped and ready to bolt on! Just take some

measurements and your salesman can order your custom hoses for you.(Please allow ample time when ordering as each hose is custom built to your specifications)

Below is the a table of how to measure your hoses.

4 ITEMS NEEDED WHEN PLACING HOSE ORDER:

1- Hose End #1______ 4- Hose End #2______2- Hose Length______3- Fitting Angle______

Note: All HS-79 hoses are NON-RETURNABLE. Please make sure all measurements are correctbefore placing order.


PLUMBING & FITTINGSXRP ALUMINUM ADAPTOR FITTINGS

AN - NPT Male Tee

XRP 982604XRP 982606XRP 982608

P/NSIZEAN - NPT On Run Tee Male NPT Nipple Female Flare Swivel

3 - 1/8” NPT4 - 1/8” NPT6 - 1/4” NPT8 - 3/8” NPT

XRP 982503XRP 982504XRP 982506XRP 982508

P/NSIZE4 - 1/8” NPT6 - 1/4” NPT8 - 3/8” NPT



P/NSIZE468

1012

8 - 6


P/NSIZE

Female NPT Union



P/NSIZEAN O-Ring Plug AN O-Rings AN O-Ring - AN Union

68

101216


P/NSIZE689

101216

NIA 112NIA 113NIA 115NIA 210NIA 212NIA 216

P/NSIZE

Bulkhead Union

3468

1012


P/NSIZE90° Bulkhead Union 45° Bulkhead Union Bulkhead Union Tee

3468

1012


P/NSIZE3468

10


P/NSIZE3468

10


P/NSIZE

Bulkhead Union On Run

34

XRP 980403XRP 980404

P/NSIZEAluminum Nuts Union Tee Female Flare Tee

3468

1012


P/NSIZE468

1012


P/NSIZE468

10

XRP 900204XRP 900206XRP 900208XRP 900210

P/NSIZE

O-Ring Sold Separately

689

10101012121220

XRP 980086XRP 980068BRP 5026XRP 980081BRP 5024XRP 980013XRP 980014BRP 5021XRP 980012XRP 980018

P/NO-RING TAPER86

108

101216101216


PLUMBING & FITTINGS

SIZE

NPT - AN Straight NPT - AN 45° NPT - AN 90° Pipe Reducers

Flare Union

3468101216

XRP 981503XRP 981504XRP 981506XRP 981508XRP 981510XRP 981512XRP 981516

P/NSIZEFlare Reducer Union Male NPT Hex Plugs Male Allen NPT Plugs

4 - 36 - 48 - 6

10 - 610 - 812 - 612 - 8

12 - 1016 - 1016 - 12

XRP 991902XRP 991906XRP 991912XRP 991914XRP 991915XRP 991918XRP 991919XRP 991920XRP 991922XRP 991923

P/NSIZE1/8” NPT1/4” NPT3/8” NPT1/2” NPT3/4” NPT


P/NSIZE

Male AN Plugs

3468101216


P/NSIZEFemale AN Caps

3468

101216


P/NSIZE

3 - 1/8” NPT4 - 1/8” NPT6 - 1/4” NPT

10 - 3/8” NPT10 - 1/2” NPT12 - 1/2” NPT12 - 3/4” NPT16 - 1”NPT

XRP 982303XRP 982304XRP 982306XRP 982311XRP 982310XRP 982314XRP 982312XRP 982316

P/NSIZE3 - 1/8” NPT4 - 1/8” NPT4 - 1/4” NPT6 - 1/8” NPT6 - 1/4” NPT6 - 3/8” NPT6 - 1/2” NPT8 - 1/4” NPT8 - 3/8” NPT8 - 1/2” NPT10 - 3/8” NPT10 - 1/2” NPT10 - 3/4” NPT12 - 1/2” NPT12 - 3/4” NPT16 - 3/4“ NPT

16 - 1”NPT20 - 1 1/4” NPT

XRP 981603XRP 981604XRP 981644XRP 981662XRP 981606XRP 981666XRP 981668XRP 981607XRP 981608XRP 981688XRP 981611XRP 981610XRP 981613XRP 981614XRP 981612XRP 981617XRP 981616XRP 981620

P/NSIZE3 - 1/8” NPT4 - 1/8” NPT4 - 1/4” NPT6 - 1/8” NPT6 - 1/4” NPT6 - 3/8” NPT8 - 1/4” NPT8 - 3/8” NPT8 - 1/2” NPT

10 - 3/8” NPT10 - 1/2” NPT12 - 1/2” NPT12 - 3/4” NPT16 - 3/4“ NPT

XRP 982203XRP 982204XRP 982244XRP 982262XRP 982206XRP 982266XRP 982207XRP 982208XRP 982288XRP 982211XRP 982210XRP 982214XRP 982212XRP 982217

P/NSIZE1/4” - 1/8”3/8” - 1/4”3/8” - 1/8”1/2” - 3/8”1/2” - 1/4”1/2” - 1/8”3/4” - 1/2”3/4” - 3/8”3/4” - 1/4”1” - 3/4”1” - 1/2”1” - 3/8”

1 1/4” - 3/4”

XRP 991201XRP 991202XRP 991203XRP 991204XRP 991205XRP 991206XRP 991207XRP 991208XRP 991209XRP 991210XRP 991211XRP 991212XRP 991216

P/NSIZE

Guage Fitting

1/8” NPT Female to AN4 Male1/8” NPT Female to AN3 Male

XRP 705004XRP 705003

P/N

Stat-O-Seals

1/2”9/16”5/8”3/4”7/8”


P/NSIZE

1/8” NPT1/4” NPT3/8” NPT1/2” NPT3/4” NPT1” NPT


P/NSIZE

AN 10 Female - AN 8 MaleAN 8 Female - AN 10 MaleAN 6 Female - AN 8 MaleAN 8 Female - AN 6 Male1/2” NPT Female - AN 8 MaleAN 10 Female - AN 12 Male

XRP 995011BRP 5051XRP 995108XRP 995008BRP 5070XRP 995112

P/NDESCRIPTION

Male - Female Adaptors


PLUMBING & FITTINGSSPECIALTY FITTINGS

AN Female AN Male Female NPT Weld In Bungs

1/8” NPT1/4” NPT3/8” NPT1/2” NPT3/4” NPT1” NPT


STEELSIZE ALUM

BRP 4998S

1/2”-20 Female1 1/2” - 12 Weld Bung(for BRP 563F cap)1 1/2” - 12 Bung andCap Assembly1 1/2” - 12 Cap

BRP 4990

BRP 5012

BRP 5013BRP 563F

P/NSIZE

Brass NPT Nipple

1/2” NPT KBP 232P/NSIZE

Steel Male AN Union Oil Pressure Fitting AN O-Ring -NPT Union

AN3 TIL 73-815-3LP/NSIZE

1/8” NPT - AN4(installs in engine) BRP 5060

P/NSIZEAN9 O-Ring Male

to 3/8” NPT Female BRP 5027

P/NSIZE

Steel AN - NPT 90°

AN3 - 1/8” NPTAN4 - 1/8” NPT

XRP 482203XRP 482204

P/NSIZELong Steel AN - NPT

AN10 - 3/8” NPTAN10 - 1/2” NPTAN12 - 3/8” NPTAN12 - 1/2” NPT

BRP 5065BRP 5064BRP 5067BRP 5066

P/NSIZESteel AN Elbows

AN6 - 45°AN6 - 90°

AN10 - 90°

XRP 900406KBP 225KBP 227

P/NSIZESteel AN - NPT 45°

AN3 - 1/8” NPTAN4 - 1/8” NPT

XRP 482303XRP 482304

P/NSIZE

2 1/2” Long

ALUMINUM WELD IN BUNGS

468

10121620


P/NSIZE1012

BRP 5000BRP 5001

P/NSIZE

-20 -16

THREAD SIZES

AN THREAD SIZES NPT THREAD SIZES

Steel AN -Straight

AN3 - 1/8” NPTAN4 - 1/8” NPT

XRP 481603XRP 481604

P/NSIZE


ENGINE & ACCESSORIESCRATE ENGINE AND COMPONENTS

GM 602 Crate Engine GM 19258602P/NDESCRIPTION

DIRT SportsmanCrate Engines

This list provides all necessary parts to install a crate engine.

P/NDESCRIPTIONQTYP/NDESCRIPTIONQTYFUEL DELIVERY SYSTEM FLYWHEEL

1 Carter fuel pump (comes with hardware & gasket) CTR M4891 1 Chevy flywheel for crate engine BERT BER 311-NC-EXT1 GM fuel pump block plate BRP 356 1 Bolt kit for flywheel to crankshaft BRP 3281 GM fuel pump push rod COM 4616 or GM 3704817 1 Long chevy dowel pins BRP 2932 AN8-1/4" NPT adaptor fitting XRP 981607 1 Chevy flywheel for WINTERS WIN 63844-181 AN8 90 Degree push on fitting XRP 249008 1 Aluminum coupler only BRP 60321 AN8 Straight female push on fitting XRP 230008 1 Ring gear only BRP 60302 Blue push on hose XRP 340008 1 Flywheel shims WIN 623211 Holley carburetor log BRP 50451 Holley carburetor HOL 4777 or HOL 0-80541-1 BELTS AND PULLIES1 Open hole carb spacer BRP 372 1 Serpentine Pulley System (includes belts) BRP 1442 / BRP 1442BK1 Fuel pump block plate gasket DET 15018 1 7MM Pulley System (includes belts) BRP 9274-12 Open hole carb spacer gasket MRG 541 Carb linkage adaptor kit BRP 3701 Throttle rod complete BRP 410R-3

POWER STEERING SYSTEMIGNITION SYSTEM 1 Power steering pump mount BRP 268 / BRP 268BK

8 Spark plugs NGK TR5 or GM R44LTS 1 Serpentine power steering pump w/pulley BRP 5811 Spark plug wires MOR 72407 or MSD 31249

OPTIONAL ALTERNATORSOIL SYSTEM 1 Powermaster Alternator BRP 8172-BR

1 Oil filter adaptor BRP 558 or ALL 92000 1 Alternator mounting kit BRP 9068 / 9068BK1 Oil pressure adaptor BRP 5060 1 Alternator 7MM Belt BRP 92871 Oil filter FRM HP41 Oil filter adaptor BRP 552 1 Powermaster alternator w/v-belt pulley POW 81727 Joe Gibbs Racing Oil XP1 JGP 00006 1 Alternator mounting kit BRP 9068 / 9068BK

1 Alternator v-belt BRP 937-1COOLING SYSTEM

1 Water pump STE 13103 1 Powermaster alternator w/serp pulley POW 8172-1721 1-1/2" Upper rad hose BRP 9345 / 9345RD 1 Alternator mounting kit BRP 9068 9068BK1 1-3/4" Lower rad hose BRP 9344 / 9344RD 1 Alternator serpentine belt BRP 9472 Upper Radiator Hose Clamps KBP 60

3 1/2" Pipe plugs for intake XRP 993205 EXHAUST1 3/8" Pipe plug for intake XRP 993204 1 Headers (comes with bolts and gaskets) SCH 1122BCM1 3/4" Pipe plug for water pump XRP 993206 2 Mufflers (3" inlet and outlet) DMX 17223 or EXT 308301 2" Fan spacer BRP 1012 / BRP 1012BK 1 Muffler installation kit BEY DMTPK-31 17" Steel fan ALL 30103 AIR FILTER

1 Air filter housing ALL 260941 Filter element 14" X 5" GRN 2071 or K-N E37601 Filter pre-filter for 14" X 5" element OUT 10-1004-01

1 17" Nylon fan ALL 30094

BRP 9274-1 Includes: BRP 9279, BRP 9271, BRP 9273, BRP 9288, BRP 268BK, BRP 9068BK 3 X BRP 9289, BRP 9287, BRP 9296, ALL 30094

2 Lower Radiator Hose Clamps KBP 62


ENGINE & ACCESSORIESBICKNELL ENGINE MOUNTS

BRP 292

BRP 312

BRP 307 BRP304 BRP 298R

BRP 325

Small Block Chevy Front Plate - Wet SumpP/NDESCRIPTION

BRP 312

Mid-Rail (2000 to present) Rear Aluminum Engine Plate(fits small and big block chevy, Ford SVO and Chrysler)Downtube Rear Engine Plate (fits small and big block chevy)

P/NDESCRIPTION

BRP 292BRP 301

Rear Engine Plates

Front Engine Plates

Left Mount - Small Block ChryslerRight Mount - Small Block ChryslerLeft Mount - Small Block & Big Block ChevroletRight Mount - Small Block & Big Block ChevroletLeft Mount - Small Block Ford (SVO)Right Mount - Small Block Ford (SVO)Left Rubber Mount - Small Block & Big Block ChevroletRight Rubber Mount - Small Block & Big Block ChevroletLate Model Front SBC Engine Plate

P/NDESCRIPTIONBRP 302LBRP 302RBRP 304BRP 305BRP 306BRP 307BRP 298LBRP 298RBRP 308

Steel Side Engine Mounts

Small Block Chevrolet Right Front Aluminum PlateBig Block Chevrolet Right Front Aluminum Plate

P/NDESCRIPTIONBRP 325BRP 327

Aluminum Front 1/2 Plates

ENGINE PLATE SPACERS

2” Long Round Spacer4” Long Round Spacer6” Long Round Spacer1 3/8” Thick Spacer Block2” Thick Spacer Block

2” Long Chevrolet Dowel Pins (sold in pairs)Ford Dowel Pins (sold in pairs)

P/NDESCRIPTIONBRP 482BRP 704BRP 749-6BRP 314BRP 315

BRP 293BRP 294

Engine Plate Spacers and Dowel Pins

CHEVY ENGINE MOUNTS

ENGINE DOWEL PINS

Steel Chevrolet Front Engine Mounts (sold in pairs)Offset Steel Chevrolet Front Engine Mounts (sold in pairs)Rear Steel Engine Mounts (sold in pairs)

P/NDESCRIPTIONAFC 80651PCR 100-364AFC 80652

Stock Engine Mounts

BRP 308


ENGINE & ACCESSORIES

INTAKE MANIFOLDS

BRO HV-1000

WM 128250

Brodix SBC Intake (DIRT Spec Intake) Also fits Brodix -8., -10, -11,-11X and track 1 cylinder heads. Uses FEL 1206 gasketEdelbrock Intake Manifold #2925 CNC ported by Wilson Manifolds

P/NDESCRIPTION

BRO HV-1000WM 128250

Small Block Chevrolet Intake Manifolds

BRODIX ALUMINUM SPEC HEADS

CYLINDER LEAK DOWN GAUGES

Brodix 2.05 Intake Valves for Spec Head (sold each)Brodix 1.60 Exhaust Valve for Spec Head (sold each)Brodix Valve Spring for Spec Head (sold each)Isky Valve Spring for Spec Head (sold QTY of 16)Brodix Valve Spring Retainers (sold each)

P/NDESCRIPTIONBRO BR60015BRO BR81022BRO GA1000ISK 9965BRO BXTR2398BR

DIRT Spec Head BareDIRT Spec Head MachinedDIRT Spec Head Complete

P/NDESCRIPTIONBRO SPCHMS-UPGBRO SPCHMSP-M-UPGBRO COMPLETE-UPG

Chevrolet DIRT 358 Spec Head (sold each)

COMPLETE HEADS COME WITH THE FOLLOWING OPTIONS:- Intake matched to FEL 1206

- Competition Valve job- Angle Milled to 64CC

- Intake Valves- 2.055” X 5.020“ (+.100”)- Exhaust Valves- 1.600” X 5.015” (+.050”)

- Isky Tool Room Springs - 245# @ 1.950” & 585# @ 1.270” Lift-Titanium Retainers with 10° locks

- includes 7/16” studs with 5/16” Guide plates (Comp 4808)- Includes Valve Seals

- Upgraded to Manganese Bronze valve guides

Replacement Brodix Spec Head Parts

BRP cylinder leak down gaugeBRP liquid filled cylinder leak down gauge

P/NDESCRIPTIONBRP 9238BRP 9238L

BRP 9238 BRP 9238L

Allstar Chevy engine stand - all steel constructionP/NDESCRIPTION

ALL 10171

ENGINE STAND


LUBRICANTS & FILTERSOIL COOLERS

DRY SUMP TANK & MOUNT

BRP Lightweight Oil Cooler - 5 3/4” X 11” (2 X 1/2“ NPT)BRP Lightweight Oil Cooler - 8 1/2” X 11” (2 X 1/2“ NPT)BRP Lightweight Oil Cooler - 11” X 11” (2 X 1/2” NPT)Griffin Oil Cooler - 5 3/8” X 12” X 2 1/2”(has 2 X 1/2” NPT Female, & 2 X AN12 Male Fittings)Oil Cooler Mount (2 Required) - Used to Mount Oil Coolerto BRP 447 Inner Side Bar HoopGriffin Oil Cooler Mount for left wing (mounts cooler toBRP 447 and BRP 7100 inner side bar hoops)


GRF CX-11973-01

MFG CHA134

MFG CHA227

P/NDESCRIPTION

Saldana Dry Sump Tank - 24” Tall C 6” Round12 quart capacity - has 1 X 3/4” NPT Inlet and 1 X 3/4“ NPT Outlet and 3/4”” NPT Vent in topDry Sump Mount (comes with 2 clamps) - mounts in LRof BRP Chassis - Fits Saldana and Art`s Round TanksReplacement Clamp (sold each)Self Adhesive Oil Pan / Dry Sump Tank Heater (5” X 7”)Dry Sump Vent Can - 3/8” NPT InletReplacement Saldana Dry Sump Tank Drain Plug Replacement O-Ring For XRP 9814106AN 16 In-Line Return Filter (comes with 75 micron stainless filterDirt Modified Left Side Aluminum Oil Lines (no return filter)Dirt Modified Left Side Aluminum Oil Lines With AN 16 returnfilter mount (AN 16 return filter sold seperately)Art`s Dry Sump Tank - 24” tall X 6” Round with 12 quart capacity(has AN 16 inlet and outlet - self venting)

SAL OT624S-RH

BRP 556BRP 556CSTF 6775ALL 36108

XRP 981410PTR 09-0439ART 2010L

ART 2010F

ART 500101

P/NDESCRIPTION

BRP 556C

BRP 556

SAL OT624S-RH

STF 6775

BRP 574

MFG CHA134GRF CX11973-01

ALL 36108

OIL FILTERS

Ford / ChryslerGMLarge GM with Adaptor

FOR FL12AFRM HP1FRM HP4FRM HP6A

FORD FRAMDESCRIPTION WIX

WIX 51060R

WIX 51060R FRM HP4FOR FL12A

PTR 09-0439

ART 500101

ART 2010F


LUBRICANTS & FILTERS

OIL FILTER MOUNTS & ADAPTORS

Replacement Filter Adaptor Fitting

Replacement Fitting for BRP 555 (adapts oil filter to housing)Replacement Fitting for BRP 557 (adapts oil filter to housing)Replacement Fitting for BRP 559 (adapts oil filter to housing)

BRP 555FBRP 557FBRP 559F

P/NDESCRIPTION

Remote Oil Filter Mounts

Small Block Chevy Oil Filter Adaptor (no bypass) BRP 552P/NDESCRIPTION

Remote Oil Filter Mount for HP1 style Oil FilterRemote Oil Filter Mount for HP4 style Oil FilterRemote Oil Filter Mount for HP6 style Oil FilterSmall Block Chevy Block Mount for BRP 557/BRP 555 Remote Oil Filter Mount


P/NDESCRIPTION

Oil Filter Adaptor

Oil Filter Adaptor with Bypass (Oil Cooler)

Small Block Chevy Oil Filter Mount (has 1/2” NPT Inlet and Outletfor plumbing oil cooler) - Uses HP 4 Style Oil FilterGEN 6 Big Block Chevy Oil Filter Mount (has 1/2” NPT Inlet and Outletfor plumbing oil cooler) - Uses HP 4 Style Oil FilterFord Oil Filter Mount ( has 1/2” NPT Inlet and Outlet for plumbingoil cooler) - Uses HP 1 Style Oil Filter

BRP 558

BRP 567

BRP 561

P/NDESCRIPTION

BRP 550

BRP 561BRP 558/BRP 567

BRP 555/557/559

BRP 555/557/559 have 2 AN10 O-Ring Outlets, 1 X AN 10 O-Ring Inlet,and 1 X 1/8”NPT Pressure Outlet

REAR END & TRANSMISSION OIL

Joe Gibbs Synthetic 75W110 Gear Oil (1 quart)Xtreme Lubricants Synthetic 75W90 Gear Oil (5 gallon pail)Torco Synthetic 75W90 Gear Oil (1quart)Torco Synthetic 75W140 Gear Oil (1 quart)Torco MTF Manual Transmission Fluid (1 quart)

JGP 00630XTR 75W90TOR A257590TOR A257514TOR A200022

P/NDESCRIPTION

REAR END OIL PUMP

Tilton Rear End PumpReplacement Seal Kit

TIL 40-524TIL 40-902

P/NDESCRIPTION

BREATHERS

1/2” Vent X 3” Diameter5/8” Vent X 3” Diameter3/4” Vent X 3” Diameter1” Vent X 3” Diameter

K-N 62-1140K-N 62-1150K-N 62-1160K-N 62-1170

P/NDESCRIPTION3” Diameter X 2” High

3/8” Vent X 2” Diameter1/2” Vent X 2” Diameter1” Vent X 2” Diameter

K-N 62-1000K-N 62-1010K-N 62-1040

P/NDESCRIPTION2” Diameter X 1 1/2” High

1 1/2” Clamp-On1 1/2” Clamp-On WithShield

ALL 36202

ALL 36203

P/NDESCRIPTION1 1/2” Clamp-On


LUBRICANTS & FILTERSJOE GIBBS DRIVEN OILS

Xtreme Racing Oil Synthetic 5W50 (5 gallon pail)Xtreme Racing Oil Synthetic 75W90 Gear Oil (5 gallon pail)

XTR 5W50XTR 75W90

P/NDESCRIPTION

XP0 - Synthetic 0W5 Racing OilXP1 - Synthetic 5W20 Racing OilXP3 - Synthetic 10W30 Racing OilXP5 - Semi - Synthetic 20W50 Racing OilXP6 - Synthetic 15W50 Racing OilXP9 - Synthetic 10W40 Racing Oil5W30 Break In Oil75W110 Gear Oil

JGP 00406JGP 00006JGP 00306JGP 00906JGP 01006JGP 03206JGP 01806JGP 00630

P/NDESCRIPTION

XTREME Racing Oil

Joe Gibbs Racing Oil

XTR 75W90

Carburetor Cleaner - 11 oz.Engine DegreaserBrake Cleaner - 15 oz.0W30 Break In Oil15W50 Synthetic Racing Oil15W50 Muscle Car Oil10W30 Synthetic Racing Oil

CHA 4121KCHA 4123iCHA 4125iCHA 4270HCHA 4309HCHA 4350HCHA 4363H

P/NDESCRIPTIONChampion Racing Oil

CHAMPION RACING OILS

CHA 4121K CHA 4123i CHA 4125i

CHA 4270H CHA 4309H CHA 4350H CHA 4363H


STARTERS & DRIVETRAINWINTERS TRANSMISSIONS

Winters Aluminum Modified Transmission (38 pounds) WIN 60150P/NDESCRIPTION

Replacement Shifter Assembly (comes complete with rod ends)Economy Rebuild Kit - Includes gaskets, o-rings, clutches & disksComplete Rebuild Kit - Includes gaskets, o-rings, all bearings,clutches,and steel disks.

WIN 60115SWIN 62824-2

WIN 62825-2

P/N DESCRIPTIONITEM68 WIN 61847 Clutch Spring Spacer69 WIN 67687 Retaining Ring70 WIN 61853 Clutch Disk, Friction71 WIN 61852 Clutch Disk, Steel72 WIN 61735 Clutch Gear73 WIN 67559 Needle Bearing74 WIN 62354 Spacer75 WIN 67585 Thrust Washer76 WIN 61740 Flange77 WIN 67990 Core Plug78 WIN 67676 Retaining Ring, Core Plug79 WIN 65856 Flange Yoke80 WIN 67152 3/8-24 x 7/8" 12pt81 WIN 68033 5/16-18 Jam Nut83 WIN 62637 Shift Knob (Specify Red or Black)84 WIN 68040 5/16-18 x 5/8" BHCS85 WIN 62168 Shift Arm, Low/Neutral/Direct86 WIN 62306 Linkage Pin87 WIN 68301 Clip, Linkage Pin88 WIN 62401 Shift Linkage, Low/Neutral/Direct89 WIN 68302 Clip. Clevis Pin90 WIN 62307 Clevis Pin91 WIN 67580 Heim End92 WIN 68032 Jam Nut, Heim End93 WIN 62356 Spacer94 WIN 62169 Shift Arm, Reverse95 WIN 62402 Shift Linkage, Reverse96 WIN 68019 Shoulder Bolt97 WIN 68013 Wave Washer98 WIN 68035 Plug, Fill99 WIN 67874 Plug, Drain100 WIN 68052 Case Plug101 WIN 68025 Cap Plug

P/N DESCRIPTIONITEM1 WIN 61745 Transmission Case, Aluminum1 WIN 61745M Transmission Case, Magnesium2 WIN 62155 Gasket3 WIN 61843 Rear Cover, Aluminum3 WIN 61843M Rear Cover, Magnesium4 WIN 62105 Shuttle Pin5 WIN 67398 Detent Ball6 WIN 62333 Detent Spring Top7 WIN 68031 3/8-16 Jam Nut, Detent Screw8 WIN 68030 3/8-16 x 1" Detent Screw9 WIN 62332 Detent Spring, Side

10 WIN 62156 Gasket, Side Cover11 WIN 62157 Side Cover, Shorty12 WIN 67127 5/16 Washer13 WIN 68034 5/16-18 x 3/4" HHCS14 WIN 61911 Shift Yoke, Low/Neutral/Direct15 WIN 67837 5/16-24 x 1/2" SHSS16 WIN 61691 Shift Yoke, Reverse17 WIN 68027 1/4-28 x 1/2" SHSS1 WIN 62212 Shift Shaft, Reverse19 WIN 62211 Shift Shaft, Low/Neutral/Direct20 WIN 67259 Seal. Shift Shaft21 WIN 61741 Sliding Gear22 WIN 67686 Retaining Ring, Bearing23 WIN 67685 Retaining Ring, Output Shaft24 WIN 67556 Bearing, Ouput Shaft25 WIN 67695 Retaining Ring26 WIN 67568 Needle Bearing27 WIN 62373 Aluminum Spacer28 WIN 67262 Rear Seal28 WIN 67262V Rear Seal, Viton32 WIN 68036 Street Elbow, 1/8 NPT33 WIN 61845 Push Rod

35363738394041424344454647484849

34 WIN 61906 Piston Thrust WasherWIN 61844 PistonWIN 67482 O Ring, PistonWIN 68024 BreatherWIN 65313 BleederWIN 65314 Adapter, BleederWIN 68042 Compression FittingWIN 67811 WasherWIN 67117 7/16-14 x 1 1/4" HHCSWIN 68304 Retaining Ring, Core PlugWIN 68000 Core PlugWIN 61991 Main ShaftWIN 67555 Bearing, Input ShaftWIN 67682 Retaining Bearing, Input BearingWIN 67256 Seal, Seal PlateWIN 67256V Seal, Seal Plate, VitonWIN 67483 O Ring, Seal Plate

50 WIN 61744 Seal Plate51 WIN 67195 5/16-18 x 3/4" 12pt52 WIN 61739-02 Input Shaft, 22 Spline53 WIN 67481 O Ring, Reverse Shaft54 WIN 67992 Roll pin, Reverse Shaft55 WIN 61743 Reverse Counter Shaft56 WIN 68303 Retaining Ring57 WIN 67563 Needle Bearing58 WIN 61742 Reverse Idler Gear59 WIN 67480 O Ring60 WIN 67991 Roll Pin, Counter Shaft61 WIN 61737 Counter Shaft62 WIN 67560 Thrust Washer63 WIN 67562 Thrust Bearing64 WIN 61734-36 Clutch Pack Hub65 WIN 61736 Clutch Pack Spacer66 WIN 67591 Needle Bearing67 WIN 61912 Clutch Spring

P/N DESCRIPTIONITEM

REPLACEMENT PARTS LIST


STARTERS & DRIVETRAINBERT GEN II TRANSMISSIONS

GEN II Lightweight Modified Transmission (33.5 pounds) - NO SHIFTERGEN II Lightweight Modified Transmission with Standard ShifterStandard Shifter AssemblyRemote Shifter AssemblyReplacement Shifter Cable Only

BER 1200BER 1200SBER 1210BER 078SGBER 078-1C

P/NDESCRIPTION

BER 1200S

BER 1210

BER 078SG

GEN II MAIN BODY EXPLODED VIEW

GEN II TAIL SECTION EXPLODED VIEW

BER SG-1000-10-10 SUB ASSEMBLYBER SG-1000-20 FORK SUB ASSEMBLY


STARTERS & DRIVETRAIN

1........SG-1150 .....Shaft Seal ..................................................................1

P/N DESCRIPTIONITEMP/N DESCRIPTIONITEM1 BER SG-1029 Reverse Gear 23 BER SG-1037 Front Cover Stud X 42 BER SG-1031 Reverse Bearing (comes with SG-1061) 24 BER SG-1156 5/16" Flat Washer X 4

2B BER SG-1061 3 /16" Steel Ball 25 BER SG-1052 Shaft Seal CRWA1-R3 BER SG-1017 Selector Fork 26 BER SG-1258 5/16"F Nylock Nut X 44 BER SG-1030-02 Bert Band (comes with SG 1030-01) 27 BER SG-1006 Sun Gear Selector

4B BER SG-1030-01 Band Anchor 28 BER SG-1033 Band Anchor Stud5 BER SG-1076 Double Row Chain 29 BER SG-1064 Servo AN Adaptor

6M BER SG-1002 Input Shaft For Modified 30 BER SG-1063 1/4" NPT Magnetic Drain Plug X 26L BER SG-1003 Input Shaft For Late Model 31 BER SG-1019 Band Anchor Shaft7 BER SG-1056 1/2"F Nylock Nut 32 BER SG-1078 Piston Return Spring8 BER SG-1079 O-Ring - 3/4" OD X 1/16" Wall 33 BER SG-1020 Servo Cover9 BER SG-1032 Carrier Thrust Support Bearing 34 BER SG-1066 #10 Flat Head Allan Bolt X .750" X 4

9B BER SG-1060 5/16" Steel Ball 35 BER SG-1065 Servo Bleed Adaptor (comes with SG-1067)10 BER SG-1027 Reverse Gear Shaft (Comes with SG-1034) 36 BER SG-1081 O-Ring11 BER SG-1038 O-Ring Casting 37 BER SG-1018 Servo Piston12 BER SG-1028 Reverse Idler Gear 38 BER SG-1077 3/32" O-Ring X 213 BER SG-1001 Main Casting 39 BER SG-1082 Stud O-Ring X 414 BER SG-1000-20 Front Fork Sub Assembly 40 BER SG-1039 Gasket15 BER SG-1057 Needle Bearing X 2 41 BER SG-1004 Front Cover 16 BER SG-1021 Thrust Washer X 4 42 BER SG-1012 Sun Gear 17 BER SG-1068 Breather 43 BER SG-1069 Needle Bearing18 BER SG-1000-10-10 Carrier Sub Assembly 44 BER SG-1009 L and R Carrier19 BER SG-1054 O-Ring - 9/16" OD X 1/16" Wall 45 BER SG-1007 Carrier Crown20 BER SG-1022 Front Fork Support Screw 46 BER SG-1058 Needle Bearing21 BER SG-1080 External Retaining Rings, 5160-137 X 2 47 BER SG-1067 Servo Bleed Adaptor Plug 22 BER SG-1053 Input Shaft Bearing 48 BER SG-1016 Sun Gear Thrust Ring

49 BER SG-1011 Carrier Support

BERT GEN II TRANSMISSION PARTS LIST

GEN II MAIN BODY EXPLODED VIEW

GEN II TAIL SECTION EXPLODED VIEW

1 BER SG-1150 Shaft Seal 13 BER SG-1202 Modified Output Shaft2 BER SG-1102 Shifter Rod 14 BER SG-1250 Deep Groove Ball Bearing3 BER SG-1017 Selector Fork 15 BER SG-1251 Shaft Seal CRWA1-R4 BER SG-1157 7/16"C X 3/8" Set Screw X 2 16 BER SG-1021 Thrust Washer5 BER SG-1056 1/2"F Nylock Nut 17 BER SG-1160 Internal Retaining Ring6 BER SG-1155 5/16"C X 1 1/2" Hex Bolt X 4 18 BER SG-1101 Gear Selector7 BER SG-1154 5/16"C X 2" Hex Bolt 19 BER SG-1252 3/8"F X 1 1/2" Hex Bolt8 BER SG-1051 Lockwasher X 5 20 BER SG-1253 3/8" Lockwasher9 BER SG-1156 Flat Washer X 5 21 BER SG-1213 Rear Yoke Washer10 BER SG-1201 Modified Tail Housing 22 BER SG-1212 Modified Rear Yoke11 BER SG-1035 Detent Plunger 23 BER SG-1203 Output Shaft Spacer12 BER SG-1158 Detent Spring

P/N DESCRIPTIONITEMP/N DESCRIPTIONITEM

1 BER SG-1023 Shifter Rod 1 BER SG-1070 1/4"F X 1 3/4" Hex Bolt X 42 BER SG-1075 Internal Retaining Ring 2 BER SG-1071 1/4" Lockwasher X 43 BER SG-1025 Shifter Rod Spring Washer 3 BER SG-1010 Carrier Washer Plate4 BER SG-1073 Compression Spring 4 BER SG-1008 Planet Carrier5 BER SG-1026 Shifter Rod Spring Compressor 5 BER SG-1015 Planet Thrust Washer X 46 BER SG-1024 Shifter Rod Spring Holder 6 BER SG-1014 Planet Shaft X 47 BER SG-1072 1/4"C X 1/4" Set Screw 7 BER SG-1059 Needle Bearing (.091") X 648 BER SG-1074 10-32 X 1/2" Flat Head Capscrew 8 BER SG-1013 Planet Gear X 4


BER SG-1000-10-10 SUB ASSEMBLYBER SG-1000-20 FORK SUB ASSEMBLY


STARTERS & DRIVETRAINBERT TRANSMISSIONS

DIRT Mod Aluminum Transmission (44 pounds) BER MOZP/NDESCRIPTION

BER MOZ


STARTERS & DRIVETRAINBERT TRANSMISSION PARTS LIST

BERT TRANSMISSION SHIFTER PARTS

BERT Shifter Assembly (comes complete with rod ends and side cover)Replacement Reverse Shifter HandleReplacement High/Low Shifter HandleReplacement Reverse Link (between rod end and shifter handle)Replacement High/Low Link (between rod end and shifter handle)Replacement Shifter KnobReplacement Clutch Master CylinderReplacement Clutch Handle

P/NDESCRIPTIONBER 078MBER 080BBER 080ABER 078BBER 078ABRP 907BRK 15-1511BRP 4420-1

BER 078M BRK 15-1511

BRP 907BER 080A

BER 080B

Use TOR A2000022 MTF Transmission Fluid


Gen 1 Shifter Parts

Basic Overhaul kit for BER MOZ (GEN 1) transmission - Includes 6 X BER 026, 1 X BER 021; 2 X BER 049; 1 X BER 052; 1 X BER 062;1 X BER 071; 2 X BER 076; 1 X NIA 210

P/NDESCRIPTION

BER 090

1 BER 001 Main Casting 41 BER 041 Shifting Fork Direct Drive2 BER 002 Rear Cover (Open Drive) 43 BER 043 Snap Ring Idler Gear2 BER 002C Rear Cover (Closed Drive) 44 BER 044 Reverse Idler Gear3 BER 003 Tail Housing (Late Model) 45 BER 045 Cage Needle Bearing4 BER 004L Side Cover (Late Model) 46 BER 046 Snap Ring (Late Model)4 BER 004M Side Cover (Modified) 47 BER 047 Reverse Idler Shaft5 BER 005 Front Seal Cover (Short Input) 48 BER 048 Woodruff Key6 BER 006 Front Seal Cover (Long Input) 49 BER 049 Seal7 BER 007 Drive Flange 50 BER 050 Snap Ring Modified8 BER 008 Input Modified*(8Z) 51 BER 051 Output Bearing Modified9 BER 009 Input Late Model*(9Z) 52 BER 052 Rear Oil Seal11 BER 011 Direct Slider*(11Z) 53 BER 053 Yoke12 BER 012 Output Modified 53 BER 053C Yoke (Closed Drive)13 BER 013 Output Late Model 54 BER 054 Rear Yoke Washer14 BER 014 Counter Shaft Locking Washer 55 BER 055 Bolt 3/8"F X 1 1/4"15 BER 015 O Ring 56 BER 056 OutPut Bearing Late Model16 BER 016 Counter Shaft 57 BER 057 Snap Ring (Late Model)18 BER 018 Thrust Needle Roller 58 BER 058 Hex Socket Cap Screw 7/16"C X 1 1/4"19 BER 019 Thrust Washer A-.030"/B-.060"/C.090" 59 BER 059 Cap Screw 7/16"C X 1 1/4"20 BER 020 Cage Needle Roller (3/4") 60 BER 060 Extension Bushing21 BER 021 Front Counter Gear 61 BER 061 Piston 1 3/8"22 BER 022 Spring Counter 62 BER 062 Break Cup 1 3/8"23 BER 023 Rear Counter Gear 63 BER 063 Break Cup Extender24 BER 024 Push Sleeve 64 BER 064 Spring25 BER 025 Push Sleeve Key 65 BER 065 Rear Oil Seal26 BER 026 Clutch Disk 66 BER 066 Clutch Master27 BER 027 Steel Clutch 67 BER 067 Interlock Pin28 BER 028 Button Head Screw 5/16"C X 1/2" 68 BER 068 Filling Plug29 BER 029 Front Oil Seal 69 BER 069 Output Spacer30 BER 030 Bolt 5/16"C X 1" 70 BER 070 Clutch Spacer31 BER 031 Snap Ring 71 BER 071 Fork Retaining Pin32 BER 032 Front Input Bearing 72 BER 072 Magnetic Plug33 BER 033 Air Vent 73 BER 073 Drain Plug36 BER 036 Low & Direct Shifting Rod 74 BER 074 Cage Needle Bearing37 BER 037 Reverse Shifting Rod 75 BER 075 Reverse Shifting Fork38 BER 038 Detent Ball 76 BER 076 Frost Plug 3/439 BER 039 Detent Spring 77 BER 077 Shifter detent Ball (Modified)40 BER 040 Detent Spring High-Gear 78 BER 078M Shifter Assembly


STARTERS & DRIVETRAININBOARD BELLHOUSINGS

BERT Inboard BellhousingBERT Replacement Idler GearBERT Replacement Idler BushingBERT Replacement Idler ShaftBERT Replacement Idler SpringBERT Replacement Idler WasherBERT Replacement Long Grease FittingWinters Replacement Idler GearWinters Replacement Idler BushingWinters Replacement Idler ShaftWinters Replacement Idler SpringWinters Replacement Idler Washer

BER 300BER 303BER 304BER 306BER 308BER 309BER 310WIN 62344WIN 62204WIN 62685WIN 62341WIN 62815

P/NDESCRIPTION

BER 300

BER 303 BER 304BER 306 BER 308 BER 309

CRANK FLANGES/FLYWHEELS

Aluminum Chevy Crank Flange - BERT TransmissionFord Crank Adaptor (uses Chevy crank flange/flywheel)Bert Steel FlywheelBert Aluminum Fly Wheel ShimSteel Chevy Crank Flange - BERT TransmissionSteel New Style Crank Flange (with dowel)- BERT Transmission602 Crate Engine Crank Flange/Flywheel (1 piece) BERT Trans.Aluminum Chevy Crank Flange - WINTERS TransmissionWinters Steel FlywheelSteel Chevy Crank Flange - WINTERS Transmission602 Crate Engine Crank Flange/Flywheel (1 piece) WINTERS Trans.Late Small Block Chevy 18 Spline Aluminum Crank Flange 602 Crate Engine Flywheel Shims (sold each)Chevy Flywheel Bolts (Pack of 6) 7/16”F X 1 1/4” Allen Bolts

BRP 330BRP 335BER 370BER 324BER 007BER 007NCBER 311-NC-EXTBRP 336WIN 62479AWIN 62348-18WIN 63844-18WIN 62350-18AWIN 62321BRP 328

P/NDESCRIPTION

GUNDRILLED DRIVESHAFTS

16”18” (engine back)20” (std engine location)22“24”


P/NDESCRIPTION

YOKES & U - JOINTS

16 Spline Steel Yoke (2.05#)16 Spline Steel Yoke Machined (1.4#)Solid U Joint U-Bolt - comes with nuts and lock washers (sold each)BRP Billet Aluminum U-Bolt (sold in packs of 2)16 Spline Aluminum YokeReplacement Washer for BRP 333 YokeReplacement Snap Ring for BRP 333Aluminum Sprint Car U Joint Flange

BRP 509BRP 510BRP 512BRP 513BRP 9246BRP 333BRP 333WBRP 613SBRP 332

P/NDESCRIPTION

BRP 4044

BER 513BRP 512

BRP 509

BRP 332

BER 311-NC-EXT

BRP 336

BRP 330

BRP 333

BRP 9246


STARTERS & DRIVETRAINDRIVESHAFT COVERS

Driveshaft Cover For Winters/Bert Transmission (GEN 1)Driveshaft Cover for Bert GEN II Transmission (fits std or engine back)Bolt On Strap For GEN II Transmission with remote shifter (fills hole)Engine Back Driveshaft Cover For Winters/Bert Transmission (GEN 1)

BRP 1645BRP 9020BRP 9020-3BRP 1643

P/NDESCRIPTION

BRP 1645

Did You Know...BRP 1645 and BRP 9020 driveshaft covers

fit rubber floor cars and standard floorcars. The BRP 1644 yoke cover will only

fit GEN 1 transmissions.

STARTERS

TP 3NEM

Powermaster 200 ft/lb Inboard StarterTotal Power 3HP Inboard Starter (sealed to keep moisture out)Total Power Replacement Solenoid (fits Total Power Starters Only)

POW 9529TP 3NEMTP PS508

P/NDESCRIPTIONInboard Starters

POW 9529Afco Conventional StarterConventional Block Mount for 153 or 168 Tooth Flywheel

AFC 64200ROD MIS-PC-2106

P/NDESCRIPTIONConventional Starters

FLEXPLATES

Tilton Starter Parts

Pinion gear for starter drive assembly TIL 54-021Solenoid for most starters (EXCEPT TIL 54-11050)

TIL 54-442TIL 54-022

P/NDESCRIPTION

SHIFTER EXTENSIONS

3” Shifter extension kit ( comes with mounting bolts)Used for driver back chassis - Fits Winters and Bert Gen I BRP 9054

P/NDESCRIPTION

153 Tooth Flexplate (early)Chevy Long Pilot BushingStamped Steel Clutch Fork 153 Tooth Flexplate (late)

QMI 509121COL C-360-PBLEF 075-1406ALL 26836

P/NDESCRIPTION

AFC 64200ROD MIS-PC-2106

QMI 509121

COL C-360-PB

LEF 075-1406

BRP 9020


STARTERS & DRIVETRAINBRP SHIFTER BALL

QUARTER MASTER CLUTCHES & PARTS

2” BIllet Aluminum Shifter Ball - Red Anodized(3/8”C threads) BRP 9057

P/NDESCRIPTION

2 Disc Early Chevy (2 piece Rear Main)2 Disc Externally Balanced for Crate Engines

QMI 298108QMI 298103ZZ

P/NDESCRIPTION DIAMETERSPLINE1 1/8” X 101 1/8” X 10

7.25”7.25”

V Drive Clutches

QMI 298108

BRP 9057

2 Disc Friction Pack3 Disc Friction Pack3 Disc Friction Pack

QMI 226080QMI 325090QMI 325080

P/NDESCRIPTION DIAMETERSPLINE1 1/8” X 10

1 5/32” X 261 1/8” X 10

7.25”5.5”5.5”

Pro Series Replacement Clutch Discs

Early Chevy, 2 Piece Rear Main Seal, 153 TeethEarly Chevy, 2 Piece Rear Main Seal, 153 Teeth - Lightweight

QMI 509121QMI 509180

P/NDESCRIPTIONFlexplates

Pro Series 5.5” Clutch Floater Plate QMI 105506P/NDESCRIPTION

Floater Plate

Seal Kit for 710 Series Hydraulic Release BearingsSeal Kit for 721 Series Hydraulic Release Bearings

QMI 710101QMI 721101

P/NDESCRIPTIONRelease Bearing Seal Kits

QMI 710100

QMI 721100

710 Series Hydraulic Release Bearing Assembly, 2.00" ContactBearing Assembly, Street, 10.5 & Larger, Flat Face

QMI 710100QMI 721100

P/NDESCRIPTIONHydraulic Release Bearings


GASKETS

HEAD GASKETS

SBC Steel Wire Ring - 4.166 BoreSBC 400 with Steel Wire Ring - 4.190 BoreSBC .039” Thick - 4.080 Bore

FEL 1003FEL 1004FEL 1043

P/NDESCRIPTION

INTAKE GASKETS

DART 180 HeadsSBC Small Race 1.28” X 2.09”SBC Medium Race 1.34” X 2.21”SBC Large Race 1.38” X 2.28”SBC 1/8” - 1.25” X 1.90” to 1.40” X 2.30”

FEL 1204FEL 1205FEL 1206FEL 1207FEL 1245

P/NDESCRIPTION

VALVE COVER GASKETS

SBC 7/32” Cork RubberSBC 5/16” Steel LaminateSBC Blue Moulded Rubber with Steel CoreBBC 5/16” Cork RubberSBC 5/16” Thick Cork (Pair)

FEL 1603FEL 1604FEL 1628FEL 1630MRG 179

P/NDESCRIPTION

OIL PAN GASKETS

SBC Thick Front Seal - LH DipstickSBC One Piece Oil Pan Gasket

FEL 1803FEL 1882

P/NDESCRIPTION

FUEL PUMP GASKETS

Chevy Fuel PumpChevy Fuel Pump Block PlateSeals-It Fuel Pump Seal

DET 15010DET 15018SEA CHFP4002

P/NDESCRIPTION

SEA CHFP4002

DET 15010

DET 15018

FEL 1882

FEL 1628

FEL 1204

FEL 1003


GASKETSEXHAUST GASKETS

SBC Small Race - 1.50” X 1.50”SBC “D” Shaped 1.50” X 1.63” - Brodix Spec HeadSBC Brodix Spread Port 1.81” DiameterBBC 2.13” Round PortSBC RaceBBC 2” Round RaceSBC Crate EngineSBC Brodix Spec Head

FEL 1404FEL 1406FEL 1409FEL 1412SCH 01510SCH 02510SCH 01560SCH 01570

P/NDESCRIPTION

CARBURETOR GASKETS

MISCELLANEOUS GASKETS

SBC Water Pump Gasket (sold each)SBC Water Pump Gasket (sold each )Chevy Thermostat Housing GasketAir Cleaner Gasket with Steel CoreRe-Usable Quick Change Cover GasketSBC Timing Cover Gasket2 Barrel Holley Carb Gasket

FEL 5152DET 12046-1MRG 740FEL 2104FEL 2303FEL 2330FEL 1904

P/NDESCRIPTION

BOWL / METERING BLOCK GASKETS

Holley 4150 / 4777 Open Hole Gasket - Mr GasketHolley 4150 / 4777 Open Hole Gasket - Fel ProHolley 4150 / 4777 4 Hole Gasket - Mr GasketRochester 2 Barrel (Large Base) - Mr GasketHolley 2 Barrel 350 / 500 CFM - Mr Gasket

MRG 54FEL 1900MRG 55MRG 52MRG 49

P/NDESCRIPTION

Blue Metering Block Gasket (sold in packs of 2)Blue Bowl Gasket (sold in packs of 2)Red Metering Block Gasket (sold each)Red Bowl Gasket (sold each)Metering Block and Bowl Gasket Set - brown(1 of each gasket in package)Carburetor Rebuild Kit - 650 CFM (4777)Carburetor Rebuild Kit - 650 CFM HP (80541)Carburetor Rebuild Kit - 500 CFM (4412)

HOL 108-89-2HOL 108-83-2BLP 5401RBLP 5400RMRG 1509HOL 37-485HOL 37-933HOL 37-474

P/NDESCRIPTION

MRG 54

MRG 55MRG 52

FEL 1404

MRG 1509

HOL 108-89-2

HOL 108-83-2

FEL 2104

FEL 1904

FEL 2303

FEL 5152


ELECTRICAL & GAUGESBATTERIES

Total Power 1500 CA / 800 CCA 12V Racing Battery - weighs 31#(Dimensions - 9 7/8”L X 5 1/4”W X 6 7/8”T) Can Be ShippedTotal Power 1200 CA / 700 CCA 12V Racing Battery - weighs 24#(Dimensions - 7 3/4”L X 5 1/4”W X 6 7/8”T) Can Be ShippedTotal Power 310 CCA 12V Midget / Micro Battery - Weighs 15#(Dimensions - 6 7/8”L X 3 7/16”W X 6 1/8” T) Can Be ShippedGNB 810 CA / 700 CCA 12V Battery - Weighs 29#(Dimensions - 8.75”L X 6.75”W X 8.25”H) Cannot Be Shipped

TP 1500

TP 1200

TP 810

GNB DT-700

P/NDESCRIPTION

BATTERY POSTS

GNB DT-700

TP 1200 / TP 1500

BATTERY CABLES

BATTERY BOXES / HOLD DOWNS

Standard Style Battery Box With Hold DownBattery Hold Down for 2000 to present Bicknell Chassis

ALL 76100BRP 1541

P/NDESCRIPTIONBRP 1541

ALL 76100

Total Power Battery Posts (Includes positive and negative)Sealed Hi Amperage Master Battery Disconnect Switch (Stem and terminals are sealed to keep poisture out of switch)

TP 23-01264

TP 75904-01

P/NDESCRIPTION

Total Power Battery Cable Kit - includes 52” positive cable,12” ground cable, and 20” master switch to starter cableTotal Power Engine Ground Kit - includes 8“ cylinder head ground,12” starter ground and 20” engine ground cables

TP CK-BRP-01

TP GK-BRP-02

P/NDESCRIPTION

Top Post 52” Positive Battery CableTop Post 12” Negative Battery Cable20” Starter to Master Switch Cable

BRP 5107-1BRP 5107BRP 5107-2

P/NDESCRIPTION

Total Power Battery Cable Kits

Top Post Battery Cable Kits

BRP 5107-1

TP CK-BRP-01

TP 23-01264 TP 75904-01

TP 810


ELECTRICAL & GAUGESMSD IGNITION BOXES

Moroso SBC Under Header - NON HEI StyleMoroso SBC Under Header - HEI StyleMSD SBC Over Valve Cover - HEI StyleMSD SBC Under Header - HEI Style

MOR 72405MOR 72407MSD 31359MSD 31249

P/NDESCRIPTION

MSD Weather Tight Connector - 6 Pin Square PlugMSD Weather Tight Connector - 2 Pin Square PlugMSD Weather Tight Connector - 6 Pin Flat Plug2 pin Weather Tight Plug for BRP 9153 Helmet Fan (can be usedfor other connections)

MSD 8180MSD 8184MSD 8170

BRP 9157

P/NDESCRIPTION

MSD Ignition Box with fixed 7600 Rev Chip - DIRT 358 LegalMSD Ignition Box with Soft Touch Rev Control - Interchangable ChipsMSD 6ALN Ignition BoxPro Stock / Sportsman Soft Touch Rev ControlPro Stock / Sportsman Digital Rev Control - permitted after 1/1/2015will be mandatory for DIRTCar as of 1/1/2016Lexan Chip Cover For MSD 87286 (keeps rev chip in place)

MSD 64316MSD 6425MSD 6430MSD 87286

MSD 8727CTBRB 10

P/NDESCRIPTION

MSD 64316

MSD 87286

BRB 10

SPARK PLUGS & WIRES

WEATHER TIGHT CONNECTORS

MSD IGNITION PARTS

Autolite # AR52 - Brodix Spec HeadNGK Crate Engine Spark PlugNGK Extended TipNGK Short TipNGK Brodix Spec Head - Flat TipNGK Brodix Spec Head - Extended TipNGK Brodix Spec Head - Extended Tip Cold Plug

AUT AR52NGK TR5NGK R5674-8NGK R5673-8NGK R5671A-9NGK R5672A-8NGK R5672A-9

P/NDESCRIPTION

MSD Pro Billet Distributor - Chevy V8 with Locked Out TimingHigh Vibration Ignition Coil - does not come with mount (use MSD 8213)Replacement Rotor - Fits most MSD Billet and Pro Billet DistributorsReplacement Chevy Cap for Most MSD Billet and Pro Billet DistributorsCoil Mount for MSD 8222Blue Blaster HVC Coil - comes with mounting hardware Bronze Chevy Distributor Gear - MSD DistributorStock Chevy Bronze Distributor GearDistributor Extension Cable (green/purple trigger wire)Universal Coil Wire AssemblyDistributor Advance KitMSD 3000 Rev ChipMSD 6000 Rev ChipMSD 6200 Rev ChipMSD 7600 Rev Chip

MSD 85501MSD 8222MSD 8467MSD 8433MSD 8213MSD 8252COL C-350-MSDCOL C-350MSD 8860MOR 73235MOR 72300MSD ASY10177MSD ASY11216MSD ASY11533MSD ASY11545

P/NDESCRIPTION

MSD 8433

MSD 8467

MSD 85501

MSD 8222 MSD 8213

MSD 8180 MSD 8184 MSD 8170

MSD 31359MOR 72407

MSD 8252


ELECTRICAL & GAUGESREPLACEMENT GUAGES

TACHOMETERS

ATM 2312

ATM 3421

ATM 5421

ATM 4521

GAU 5101

Mechanical Oil Pressure - 0 - 100 psiMechanical Fuel Pressure - 0 - 15 psiMechanical Water Temperature - 140° - 280°FMechanical Oil Temperature - 140° - 280°F

ATM 2312ATM 2311ATM 2313ATM 2314

P/NDESCRIPTION2 5/8” Autogage Guages


ATM 3421ATM 3411ATM 3431ATM 3441

P/NDESCRIPTION2 5/8” Autometer Guages


ATM 5421ATM 5411ATM 5431ATM 5441

P/NDESCRIPTION2 5/8” Autometer Liquid Filled Guages


ATM 4521ATM 4511ATM 4531ATM 4541

P/NDESCRIPTION2 5/8” Autometer Glow In Dark Guages


GAU 5101GAU 5109GAU 5102GAU 5103

P/NDESCRIPTION2 5/8” Quantum Guages (dash panels)

3 3/4” Face Tachometer - Remote Recall, 0 - 10,000 RPM Std Ignition5” Face Tachometer - Non Remote Recall, 0 - 9,000 RPM Std IgnitionQuick Car 5” Face Memory Tachometer - 0 - 10,000 RPM STD Ingition

ATM 6601ATM 6809QRP 611-6001

P/NDESCRIPTION

AUT 6809

Mechanical Tachometers

Digital Tachometer (works on all ignition systems) 3 1/8” X 3 1/8” X1” TEL TACHP/NDESCRIPTION

Digital Tachometers

GUAGE PANELS

2 Guage Panel - Oil Pressure/Water Temp with Lights3 Guage Panel - Oil Pressure/Water Temp/Oil Temp with Lights

GAU 5200GAU 5300

P/NDESCRIPTIONQuantum Guage Panels

1/8” NPT Female to AN 4 Male Guage Adaptor XRP 705004P/NDESCRIPTION

TEL TACH

QRP 611-6001


ELECTRICAL & GAUGESBRP PRE-WIRED DASH PANELS

SWITCHES

Toggle Switch with Flip CoverToggle SwitchMagneto Toggle Switch or Replacement Switch for BRP 5104 DashStarter Push ButtonReplacement Flip up Switch CoverSealed Starter Remote Button with 20” Pre-Wired Leads

REB 160-1465REB 160-1470GAU 5090REB 160-1485REB 160-1490GAU 5091

P/NDESCRIPTION

GAU 5104-01

Did You Know...These pre-wired dash panels are ready to install in

any BRP car. They come with Oil Press.Water Temp. and all sending units and lights.

REB 160-1485REB 160-1470

MASTER DISCONNECT SWITCHES

WARNING LIGHTS

REBCO SWITCH PANELS

REPLACEMENT SENDING UNITS

Battery Master Disconnect Switch with Alternator (4 terminals)Total Power Sealed Master Battery Switch with Alternator (switch issealed internally at stem and connections for a moisture resistant seal)Battery Master Disconnect Switch - No Alternator (2 terminals)

REB 160-1500

TP 75904-01AFC 85268

P/NDESCRIPTION

AFC 85268

Push Button with Flip Cover SwitchPush Button with SwitchPush Button with Switch, pilot light and 1 accessory switch/pilot lightPush Button with Switch, pilot light and 2 accessory switch/pilot lights

REB 150-3395REB 150-3400REB 150-3435REB 150-3445

P/NDESCRIPTION

REB 150-3445

Switch Panels - HEI & MSD Ignitions

Oil Pressure Warning Light Kit - 20 psi Sending Unit with Red LightOil Temperature Warning Light Kit - 275° Sending Unit with Blue LightFuel Pressure Warning Light Kit - 3 psi Sending Unit with Clear LightWater Temperature Warning Light Kit - 230° Sending Unit with Amber LightReplacement Amber Light OnlyReplacement Blue Light OnlyReplacement Clear Light OnlyReplacement Red Light Only

REB 140-1280REB 140-1315REB 140-1320REB 140-1305REB 140-1365REB 140-1366REB 140-1367REB 140-1368

P/NDESCRIPTION

Adjustable Fuel Pressure Sending Unit - 3 psi (adjustable + or - 2 psi)Oil Pressure Sending Unit - 20 psiWater Temperature Sending Unit - 230°Oil Temperature Sending Unit - 275°1/2” NPT Adaptor for Water Temperature Gauge

REB 140-1335REB 140-1345REB 140-1350REB 140-1355ATM 2264

P/NDESCRIPTION

BRP Pre-Wired DashBRP Pre-Wired Dash with Glow In Dark Gauges

GAU 5104-01GAU 5104-01GID

P/NDESCRIPTION

5 Lug Terminal StripSealed Starter Remote Button with 20” Pre-Wired Leads22” Remote Starter Switch (spring loaded switch)

GAU 360-1261GAU 5091GAU 5092

P/NDESCRIPTIONDash Accessories

GAU 5091GAU 360-1261

TP 75904-01REB 160-1500


RADIATORS & COOLING

RAD CAPS AND BILLET NECKS

22# Radiator Cap29-31# Radiator CapBillet Aluminum Rad Neck for Rad Cap (Weld On)Barb Fitting for Aluminum Rad Neck (1/8” NPT X 3/8” I.D. Hose)Billet Aluminum 1 1/2” Rad Neck (Weld On)Billet Aluminum 1 3/4” Rad Neck (Weld On)Brass Fitting For Radiator Neck - 1/8” NPT to 1/4” hose end

AFC 80153LON 75265BRP 5125BRP 5126BRP 6092BRP 6093BRP 4993

P/NDESCRIPTION

BRP5126BRP 5125AFC 80153 BRP 6093

SBC WATER PUMP SPACERS

1/8” Thick Water Pump Spacer (sold in packs of 2 with 4 gaskets)1/4” Thick Water Pump Spacer (sold in packs of 2 with 4 gaskets)3/8” Thick Water Pump Spacer (sold in packs of 2 with 4 gaskets)1/2” Thick Water Pump Spacer (sold in packs of 2 with 4 gaskets)Replacement Water Pump Gaskets (sold in packs of 4)


P/NDESCRIPTION

WATER PUMPS

SBC Short Stage 3 Ultra High Flow Cast Aluminum Water PumpSBC Short Stage 1 High Flow Cast Iron Water PumpSBC Short Cast Aluminum Water PumpSBC Water Pump Block Plates (sold in pairs) used in transporting engineBBC Water Pump Block Plates (sold in pairs) used in transporting engine

STE 33103STE 13103ALL 31105BRP 9244BRP 9245

P/NDESCRIPTION

STE 33103

FANS & FAN SPACERS

15” Steel 6 Blade Fan (3.60#)17” Steel 6 Blade Fan (3.90#)15” Aluminum 6 Blade Fan (2.65#)17” Aluminum 6 Blade Fan (3.10#)17 1/2” Steel 4 Blade FanUltra Light 17” Nylon 6 Blade Fan (0.65#)

ALL 30102ALL 30103ALL 30096ALL 30097AFC 80183ALL 30094

P/NDESCRIPTION

ALL 30103 AFC 80183

BRP 1017

5/8” Fan Spacer1” Fan Spacer1 1/2” Fan Spacer2” Fan Spacer2 1/2” Fan Spacer3” Fan Spacer3 1/2” Fan Spacer4” Fan SpacerReplacement Spacer (adapts 5/8” shaft water pumps to 3/4”)

BRP 1014BRP 1009BRP 1010BRP 1012BRP 1013BRP 1015BRP 1017BRP 1019BRP 950S

RED P/NDESCRIPTION BLACK P/NBRP 1014BKBRP 1009BKBRP 1010BKBRP 1012BKBRP 1013BKBRP 1015BKBRP 1017BKBRP 1019BKBRP 950S

Did You Know...BRP fan spacers fit 5/8” & 3/4”water pumps and come with all

mounting hardware

BRP 1012BK

EXPANSION TANKS

Surge Tank Neck With Rad Cap NeckOver Flow Catch CanArt’s Standard Height Expansion Tank - right side outletSBC Short Expansion Tank - right side outletBBC Short Expansion Tank - right side outlet (with 18° cylinder head/intake clearance)

BRP 570BRP 568ART EXP5-RSTFIN 003FIN 007

P/NDESCRIPTION

15” and 17” Fans

Billet Aluminum Fans SpacersALL 30094

BRP 570

BRP 568ART EXP5-RST

FIN 007

FIN 003


RADIATORS & COOLINGTHERMOSTAT HOUSINGS AND OUTLETS

1 1/4” Thick Thermostat Spacer with 2 3/8”NPT Outlets1” Thick AN16 Thermostat Housing with 2 3/8” NPT OutletsAN 16 Water Outlet - No SwivelWater Outlet Top For Radiator CapAN 16 Water Outlet - Straight SwivelAN 20 Water Outlet - Straight SwivelAN 16 Water Outlet - 90° SwivelAN 20 Water Outlet - 90° SwivelWater Outlet Restrictor Kit

BRP 587BRP 589BRP 583MOR 63465BRP 1045BRP 1047BRP 1046BRP 1048MOR 63440

P/NDESCRIPTION

MOR 63465

BRP 583BRP 589

BRP 1046

BRP 1045BRP 1047MOR 63440

LATE MODEL RADIATORS

DIRTCar RADIATORS

Afco Aluminum Radiators

Aluminum ChevyAluminum Chevy - No Rad CapAluminum ChevyAluminum Ford

AFC 80101NAFC 80101-1NAFC 80102NAFC 80102FN

P/NDESCRIPTION WIDTH HEIGHT THICKNESS27 1/2”27 1/2”

31”31”

19”19”19”19”

2 1/4”2 1/4”2 1/4”2 1/4”

Pat’s Rad Aluminum Radiators

Aluminum Crossflow - No Rad Cap(Top Right and Bottom Right)Aluminum Downflow - With Rad Cap(Top Left and Bottom Right)Lightweight Crossflow - No Rad Cap(Top Right and Bottom Right)Lightweight Downflow - With Rad Cap(Top Left and Bottom Right)

PAT 1

PAT 4

PAT 5

PAT 6

P/NDESCRIPTION WIDTH HEIGHT THICKNESS

23”

23”

22”

22 1/2”

23”

23”

23”

22 3/4”

3 3/4”

3 3/4”

3 1/4”

3 1/4”

FAN SHROUDSBC- ART FS7BBC- ART FS6

SBC- BRB 2BBC- BRB1

SBC- ART FS7BBC- ART FS6SBC- BRB 2 BBC- BRB 1

PAT 1

AFC 80101N

Griffin Aluminum Radiators

Aluminum Crossflow - No Rad Cap(Top Right and Bottom Right)Aluminum Downflow - With Rad Cap(Top Left and Bottom Right)

GRF 185195HP

GRF 185195P


23”

23”

23”

23”

3 3/4”

3 3/4”

FAN SHROUDSBC- BRB 2BBC- BRB 1SBC- BRB 2BBC- BRB 1

GRF 185195P Aluminum Crossflow - No Rad Cap(Top Right and Bottom Right) ART 100121


23” 23” 3 3/4”

FAN SHROUDSBC- ART FS7BBC- ART FS6

Art’s Aluminum Radiators

DIRTCar RADIATOR SCREENS

Front Radiator Screen Kit (comes complete with clamps and bolts)Replacement Clamp Bracket

BRP 9400BRP 9053BK

P/NDESCRIPTION

BRP 9400


RADIATORS & COOLING

UNIVERSAL RADIATOR HOSES AND PLUGS

Universal 1 1/2” Radiator Hose - 48” LongUniversal 1 3/4” Radiator Hose - 48” Long1 1/2” Hose Plug Assembly (comes with 1 1/2” X 3” L hose, 2 KBP 28C, & BRP 6090-1 plug)1 3/4” Hose Plug Assembly (comes with 1 3/4” X 3” L hose, 2 KBP 32C, & BRP 6091-1 plug)1 1/2” Inline FillerWater Wetter

GOO 58024GOO 58028BRP 6090BRP 6091MOR 63730RED 80204

P/NDESCRIPTION

MOR 63730RED 80204

GOO 58024

BRP 6091

FAN SHROUDS

BRB 1

BBC Downflow Fan ShroudSBC Downflow Fan ShroudBBC Crossflow Fan ShroudSBC Crossflow Fan Shroud

BRB 1BRB 2ART FS6ART FS7

P/NDESCRIPTION WIDTH HEIGHT THICKNESS22 1/2”22 1/2”

20”20”

20 1/2”20 1/2”

22”22”

3 3/4”6”4”6”

Fiberglass Fan Shroud for 17” Fans

SBC/BBC Crossflow Fan Shroud BRB 7P/NDESCRIPTION WIDTH HEIGHT THICKNESS

19 1/2” 22” 2”

Aluminum Fan Shroud for 17” Fans

BRB 7

4 PLY PREFORMED SILICONE RADIATOR HOSES

SBC Lower Radiator Hose (lower right of radiator to pump)- 1 3/4” inlet and outlet X 24 3/4“ longSBC Upper Radiator Hose (top left of radiator to expansion tank)- 1 1/2” inlet and outlet X 21 3/4” longBBC Lower Radiator Hose (lower right of radiator to pump)1 3/4” Outlet, 2” Inlet X 21” LongSBC or BBC Upper Radiator Hose (top right of radiator to expansiontank - 1 1/2” inlet and outlet X 19 1/4” long

BRP 9344RD

BRP 9345RD

BRP 9346RD

BRP 9347RD


BRP 9344

BRP 9345

BRP 9346

BRP 9347

AVAILABLE IN RED AND BLACK!BRP 9347

BRP 9345 BRP 9344

BRP 9346

HEAVY DUTY HOSE CLAMPS

STANDARD HOSE CLAMPS

1.730” - 1.850”1.750” - 2.250”2.040” - 2.165”2.000” - 2.500”2.250” - 2.750”

KBP 59KBP 60KBP 61KBP 62KBP 63

P/NAPPLICATIONSIZE

SBC / BBC Upper Radiator Hoses

SBC Both Ends - BBC Radiator End OnlyBBC Water Pump End

KBP 59

KBP 48C

5/16” - 9/16”1/2” - 7/8”

1/2 - 1”5/8” - 1 1/8”3/4” - 1 1/2”7/8” - 1 5/8”1 1/4” - 2”

1 3/8” - 2 1/4”1 9/16” - 2 1/2”2 1/8” - 3 1/8”

2 9/16“ - 3 1/2”2 3/4” - 3 3/4”

KBP 4CKBP 6CKBP 10CKBP 12CKBP 16CKBP 20CKBP 24CKBP 28CKBP 32CKBP 40CKBP 48CKBP 52C

P/NAPROX. SIZE


BELTS & PULLEYS7MM PULLEY KITS

7MM 602 CRATE ENGINE Pulley Kit - 35% REDUCTION7MM 602 CRATE ENGINE Pulley Kit - 17% REDUCTION

BRP 9274BRP 9274-1

P/NDESCRIPTION

Kit Components

7MM Lower Crank PulleyWater Pump Pulley With Built In Fan SpacerAlternator PulleySteel Power Steering Pump With 9272 Pulley InstalledBlock Mount Power Steering Pump BracketAlternator MountBelt for Crank/Water Pump and Crank/Steering Pump (3 required)730MM Belt for Water Pump/Alternator (1 required)Hex Drive Adaptor (allows turning motor over with socket)17” Nylon Lightweight Fan

DESCRIPTION BRP 9274 BRP 9270BRP 9271BRP 9273BRP 9288BRP 268BKBRP 9068BK

BRP 9286BRP 9287

BRP 9296ALL 30094

BRP 9274-1 BRP 9279BRP 9276BRP 9273BRP 9288BRP 268BKBRP 9068BK

BRP 9289BRP 9287

BRP 9296ALL 30094

SBC SERPENTINE PULLEY KITS

NOTE: KITS INCLUDE ALTERNATOR BELT, MOUNT AND PULLEY.THEY DO NOT INCLUDE THE ALTERNATOR.

358 (small block) 7MM Pulley Kit - 35% REDUCTION358 (small block) 7 MM Pulley Kit - 17% REDUCTION

BRP 9299BRP 9299-1

P/NDESCRIPTION

Kit Components

7MM Lower Crank PulleyWater Pump Pulley With Built In Fan SpacerAlternator PulleySteel Power Steering Pump With 9272 Pulley InstalledBlock Mount Power Steering Pump BracketAlternator MountBelt for Crank/Water Pump and Crank/Steering Pump (3 required)730MM Belt for Water Pump/Alternator (1 required)Hex Drive Adaptor (allows turning motor over with socket)17” Nylon Lightweight Fan1/8” Crank Pulley Spacer1/8” Spacer Plate for Power Steering Bracket

DESCRIPTION BRP 9299 BRP 9270BRP 9276BRP 9273BRP 9288BRP 268BKBRP 9068BK

BRP 9286BRP 9287

BRP 9296ALL 30094BRP 9293BRP 270

BRP 9299-1 BRP 9279BRP 9276BRP 9273BRP 9288BRP 268BKBRP 9068BK

BRP 9289BRP 9287

BRP 9296ALL 30094BRP 9293BRP 270

358 SMALL BLOCK 7MM PULLEY KIT

602 CRATE ENGINE 7MM PULLEY KIT

Pulley Speed @ 6000 Engine RPMWater PumpAlternator

Power Steering

17% Reduction35% Reduction5091 rpm6000 rpm5250 rpm

3782 rpm4457 rpm3900 rpm

NOTE: KITS INCLUDE ALTERNATOR BELT, MOUNT AND PULLEY.THEY DO NOT INCLUDE THE ALTERNATOR.


Power Steering

17% Reduction35% Reduction6448 rpm7600 rpm6650 rpm

4790 rpm5645 rpm4940 rpm

Pulley Speed @ 7600 Engine RPMWater Pump

35% Reduction5646 rpm

35% Reduction Pulley Assembly

BRP 1429P/NDESCRIPTION

Kit Components

6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine Pulley.200” Thick Crank Pulley Spacer

BRP 949-1BRP 944BRP 952BRP 953

BRP 1429DESCRIPTION

SBC No Power Steering Pump

FOR 604 CRATE ENGINES, THE FOLLOWING IS REQUIRED:1- BRP 6099 - water pump spacers

2- BRP 1631 - 1/8” p/s pump spacers1- BRP 9077 - 5/16” crank pulley spacer

FOR CIRCLE TRACK APPLICATIONS, BRP 9274-1 KIT IS RECOMMENDED.


BELTS & PULLEYS

35% Reduction Pulley Assembly17% Reduction Pulley Assembly

BRP 1435BRP 1437

P/NDESCRIPTION

Kit Components

602 CRATE / SBC Head Mount Power Steering Pump

SBC Head Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Power Steering Pulley6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine Pulley.200” Thick Crank Pulley Spacer


BRP 1435DESCRIPTION BRP 1437BRP 277BRP 581BRP 949-2BRP 950BRP 952-2BRP 953



BLACK P/NDESCRIPTIONBRP 1440BRP 1442

RED P/N

Kit Components

602 CRATE / SBC BlockMount Power Steering Pump With Serpentine Alternator

SBC Block Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Power Steering Pulley6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine Pulley.200” Thick Crank Pulley SpacerAlternator MountPowermaster 1 Wire Alternator - No Pulley3 Rib Alternator BeltPowermaster Alternator Pulley

BRP 268BRP 581


BRP 9068POW 8172BR

BRP 947BRP 991

BRP 1440DESCRIPTION BRP 1442BRP 268BRP 581

BRP 949-3BRP 946

BRP 952-2BRP 953BRP 9068

POW 8172BRBRP 947BRP 991

Kit Components

SBC Block Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Power Steering Pulley6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine Pulley.200” Thick Crank Pulley Spacer

BRP 268BRP 581



BRP 949-3BRP 950

BRP 952-2BRP 953

602 CRATE / SBC Block Mount Power Steering Pump




RED P/N

SERPENTINE PULLEY KITS


Power Steering

17% Reduction35% Reduction6514 rpm5365 rpm

5646 rpm4649 rpm


Power Steering

17% Reduction35% Reduction6514 rpm 9120 rpm5365 rpm

5646 rpm 7904 rpm4649 rpm


Power Steering

17% Reduction35% Reduction6514 rpm5365 rpm

5646 rpm4649 rpm



Note: Fan Spacer Not Included.






BELTS & PULLEYSSERPENTINE PULLEY KITS

Ford PulleySerpentine Head Mount Power Steering Pump BRP 1422P/NDESCRIPTION

Kit Components

SB Ford Head Mount Power Steering Pump

SB Ford Head Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Power Steering Pulley6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine PulleySB Ford Alternator Kit (Some Modifications May be Necessary)

DESCRIPTION P/NBRP 1421BRP 581BRP 949-2BRP 1425BRP 1420BRP 932 Fan Spacer Sold Separately

Kit Components

602 CRATE / SBCBlock Mount Power Steering Pump With V Belt Alternator

SBC Block Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Power Steering Pulley6 Rib Serpentine BeltWater Pump PulleyCrank Serpentine Pulley.200” Thick Crank Pulley SpacerAlternator MountPowermaster 1 Wire AlternatorV Belt Alternator Belt

BRP 268BRP 581

BRP 949-3BRP 950-1BRP 952BRP 953

BRP 9068POW 8172BRP 937-3


BRP 949-3BRP 950-1BRP 952-2BRP 953

BRP 9068POW 8172BRP 937-3




RED P/N

Kit Components

BBC Head Mount Power Steering Pump with Serpentine Alternator

BBC Head Mount Power Steering Pump Bracket AssemblyPower Steering Pump with BRP 951 Pulley Installed6 Rib Serpentine BeltWater Pump Serpentine PulleyCrank Serpentine PulleyAlternator MountPowermaster 1 Wire Alternator - No Pulley3 Rib Alternator BeltPowermaster Alternator Pulley

DESCRIPTION BRP 1424BRP 7154BRP 581BRP 949BRP 9133BRP 952-3BRP 9069POW 8172BRBRP 947-1BRP 991

BRP 1424BKBRP 7154BKBRP 581BRP 949BRP 9133BRP 952-3BRP 9069BKPOW 8172BRBRP 947-1BRP 991

Note” a 90° �tting is required if you are using an expansion tank so rad hosewill clear alternator mount. Fitting P/N XRP 982288

BBC Serpentine Pulley Assembly BRP 1424BKBLACK P/NDESCRIPTION

BRP 1424RED P/N




Power Steering

17% Reduction35% Reduction6514 rpm

10,196 rpm5365 rpm

5646 rpm 8837 rpm4649 rpm


Power Steering

5922 rpm 7879 rpm5365 rpm

BRP 1422


Power Steering

6512 rpm 9117 rpm5365 rpm

BRP 1422


BELTS & PULLEYS7 MM PULLEYS

SBC 7MM Lower Crank Pulley - 2.60“ O.D.SBC 7MM Lower Crank Pulley- 3.50” O.D.

BRP 9270BRP 9279

P/NDESCRIPTION

7 MM BELTS

SBC Lower Crank Pulleys

SBC 7MM Water Pump Pulley - 3 1/2” Built In Fan SpacerSBC 7MM Water Pump Pulley - 2 1/2” Built In Fan SpacerSBC 7MM Water Pump Pulley - 3” Built In Fan SpacerSBC 7MM Water Pump Pulley - No Built In Fan Spacer

BRP 9271BRP 9275BRP 9276BRP 9277

P/NDESCRIPTIONSBC Water Pump Pulleys

4” O.D. - 7MM Alternator Pulley for Powermaster Alternator (.590 bore)2” O.D. - 7MM Alternator Pulley for Powermaster Alternator (.590” bore)- overdrives alternator by 75% (vs. BRP 9273) in low RPM situations

BRP 9273

BRP 9341

P/NDESCRIPTIONAlternator Pulley

7MM Power Steering Pulley BRP 9272P/NDESCRIPTION

Power Steering Pulley

615MM X 7MM Belt - Use for the following: - BRP 9270 Lower Pulley and All Water Pump Pulleys (2 required) - Drives Power Steering From Crank (1 Required)730MM X 7MM Belt - Drives Alternator From WaterPump (1 Required)650MM X 7MM Belt - Use for BRP 9279 and all Water PumpPulleys (2 required)825 MM X 7MM Belt - Use for BRP 9292 head mount powersteering pump bracket

BRP 9286

BRP 9287

BRP 9289

BRP 9290

P/NDESCRIPTION

7MM PULLEY ACCESSORIES

Hex Drive Adaptor for Turning Engine Over With Socket(fits BRP 9270 & BRP 9279 Lower Pulleys)Steel Power Steering Pump With BRP 9272 Pulley InstalledAluminum Power Steering Pump With BRP 9272 Pulley .125” Thick Crank Pulley SpacerAlternator Mounting Kit - Mounts to Water Pump.125” Spacer for BRP 268BK Power Steering Pump MountBlock Mount Power Steering Pump Mount17” Nylon Lightweight FanOne Wire Alternator - Pulley Not IncludedHead Mount Power Steering Pump Bracket for Electric Water Pump

BRP 9296BRP 9288TUR 9288BRP 9293BRP 9068BKBRP 270BRP 268BKALL 30094POW 8172-BRBRP 9292

P/NDESCRIPTION

BRP 9286

BRP 9270 BRP 9279

BRP 9271 BRP 9275 BRP 9276

BRP 9277

BRP 9272 BRP 9273

BRP 9288

BRP 9296BRP 9293 BRP 270

TUR 9288 POW 8172-BR

7MM PULLEY MOUNTS

SBC 7MM Block Mount Power Steering Pump BracketSBC 7MM Head Mount Power Steering Pump Bracket for electric water pumpsSBC 7MM Alternator Mount Bracket

BRP 268BK

BRP 9292BRP 9068BK

P/NDESCRIPTION

BRP 268BK

Note: USE BRP 9341 Alternator Pulley in low RPM situations toincrease alternator speed

BRP 9292 BRP 9068BK


BELTS & PULLEYSSERPENTINE CRANK PULLEYS

SERPENTINE WATER PUMP PULLEYS

SERPENTINE POWER STEERING PULLEYS

SERPENTINE ALTERNATOR PULLEYS

BRP 952

SBC 2.6” Diameter 6 Rib Serpentine Crank Pulley - 35% ReductionSBC 3” Diameter 6 Rib Serpentine Crank Pulley - 17% ReductionSBC 3.5“ 6 Rib Serpentine Crank Pulley - No Reduction (1:1 ratio)BBC 3” Diameter 6 Rib Serpentine Crank PulleySB Ford 3.3” Diameter 6 Rib Serpentine Crank PulleyCrank Pulley Hex Adaptor (has 2 dowel pins to fit inside crank pulleyand has 1 1/16” hex to allow engine to crank over with wrench)

BRP 952BRP 952-2BRP 9150BRP 952-3BRP 1420

BRP 9149

P/NDESCRIPTIONSerpentine Crank Pulleys

SBC 1.25” Thick Serpentine Crank Pulley SpacerSBC .200” Thick Serpentine Crank Pulley SpacerSBC .3125“Thick Serpentine Crank Pulley SpacerSBC .375” Thick Serpentine Crank Pulley SpacerSBC .500“ Thick Serpentine Crank Pulley SpacerBBC .200” Thick Serpentine Crank Pulley Spacer

BRP 953-125BRP 953BRP 9077BRP 9081BRP 9082BRP 959

P/NDESCRIPTIONSerpentine Crank Pulley Spacers

BRP 950

SBC/BBC 3 1/2” Diameter Serpentine Water Pump PulleySBC/BBC 3.85” Diameter Serpentine Water Pump Pulley

BRP 950BRP 944

P/NDESCRIPTIONSerpentine Water Pump Pulleys

SBC 3 1/2” Diameter Serpentine Water Pump Pulley with 4 1/2” Diameter V-Belt Alternator DriveSBC 3 1/2” Diameter Serpentine Water Pump Pulleywith 3 1/2” Diameter 4 Rib Alternator DriveSBC 3.85” Diameter Serpentine Water Pump Pulleywith 4 1/2” Diameter V-Belt Alternator DriveSB Ford 3.85” Diameter Serpentine Water Pump Pulleywith 3.825” Diameter V-Belt DriveBBC 3 1/2” Diameter Serpentine Water Pump Pulleywith 3 1/2” Diameter 4 Rib Alternator Drive - Required for 9135 Mount

BRP 950-1

BRP 946

BRP 944-1

BRP 1425

BRP 9133

P/NDESCRIPTIONSerpentine Water Pump Pulley with Alternator Drive

4.25” Diameter 6 Rib Power Steering Pulley - .665” I.D.Power Steering Pump with BRP 951 Serpentine PulleyAluminum Power Steering Pump with BRP 951 Serpentine Pulley

BRP 951BRP 581TUR 581

P/NDESCRIPTIONSerpentine Power Steering Pulleys

BRP 952-2 BRP 952-3

BRP 1420

BRP 944 BRP 950-1

BRP 946 BRP 944-1 BRP 1425

BRP 951 - .665” I.D.

3 Rib 3.875” Diameter Delco Alternator Pulley4 Rib 2.500” Diameter Delco Alternator Pulley (.670” bore)4 Rib 2.500” Diameter Powermaster / Denso Alternator (.590” bore)


P/NDESCRIPTIONSerpentine Alternator Pulleys

BRP 997 BRP 990

BRP 9077

BRP 9133

BRP 990 & BRP 997 are supplied with BRP 992 Bushing

BRP 9150

BRP 9149


BELTS & PULLEYS1” O.D. SERPENTINE MANDRELS

Small Block Mandrels - 7/16” I.D. X 1” O.D.

Big Block Mandrels - 1/2” I.D. X 1” O.D.

1/8” x 1/8” Keyway - 2” Long7/16” Steel Small Block Mandrel End Cap1/2” Steel Big Block Mandrel End Cap7/16” Aluminum Mandrel End Cap1/2” Aluminum Mandrel End Cap

BRP 970BRP 971BRP 971BBRP 978BRP 978-1

P/NDESCRIPTIONMandrel Accessories

2.4” Mandrel for BRP 952 and BRP 952-23.5” Mandrel for BRP 952 and BRP 952-24” Mandrel for BRP 952 and BRP 952-2


MANDRELDESCRIPTION BOLTBRP 957BRP 958

2.4” Mandrel for BRP 952-33.5” Mandrel for BRP 952-34” Mandrel for BRP 952-3

BRP 954BBRP 955BBRP 956B

DESCRIPTION MANDREL BOLTBRP 957BBRP 958BBRP 959BBRP 978

BRP 956 BRP 955 BRP 954

BRP 957

Did You Know...These drive mandrels fit the pulley

combinations on page136

SERPENTINE BELTS

SBC 35% reduction - 4 RibSBC 35% Reduction - 6 RibSBC 17% Reduction - 6 RibSBC 17% Reduction - 6 RibSBC 3 Rib Alternator BeltBBC 3 Rib Alternator Belt

BRP 949-1BRP 949BRP 949-2BRP 949-3BRP 947BRP 947-1

P/NDESCRIPTIONWater Pump/CrankWater Pump/Crank/Head Mount Power SteeringWater Pump/Crank/ Head Mount Power SteeringWater Pump/Crank/ Block Mount Power SteeringPowermaster Alternator with BRP 9068 MountPowermaster Alternator with BRP 9135 Mount

LENGTH24”36”37”

33 1/2”26”29”

SEE PAGE 138 FOR ALL PULLEYS THAT STACK ON THESE 1” O.D. MANDRELS

ALTERNATORS

Alternator Mount Assembly for GM Delco AlternatorAlternator Mount Assembly for Powermaster AlternatorSBC New Style Alternator Mount Assembly for Powermaster AlternatorBBC New Style Alternator Mount Assembly for Powermaster AlternatorBBC New Style Alternator KIT - Comes With Mount, Pulley & Belt




Powermaster 1 Wire Alternator - No PulleyPowermaster 1 Wire Alternator with 2 7/8” V PulleyPowermaster 1 Wire Alternator with BRP 991 Serpentine Pulley

POW 8172-BRPOW 8172POW 8172-172

P/NDESCRIPTION

POW 8172

ALTERNATOR MOUNTS

BRP 9068BRP 941-10 Note- Alternators Sold Separately

POW 8172-172


BELTS & PULLEYS

1” MANDREL SPACERS

BRP 972

BRP 963

BRP 965


1/4” Spacer3/8” Spacer1/2” Spacer5/8” Spacer3/4” Spacer7/8” Spacer1” Spacer1 1/4” SpacerGuide Washer

P/NDESCRIPTION

1” MANDREL V BELT DRIVE PULLEYS

3” Diameter Crank Mounted V Pulley - Drives Power Steering(comes with pins)5 1/2” Diameter Drive V Pulley for 1” Mandrel - 1/2“ V Belt3” Diameter Drive V Pulley for 1” Mandrel - 1/2” V Belt3” Diameter Drive V Pulley for 1” Mandrel - 3/8” V Belt3 1/4” Diameter Drive V Pulley for 1” Mandrel - 1/2” V Belt

BRP 1037BRP 989BRP 994BRP 994-1BRP 995

P/NDESCRIPTION

BRP 989 BRP 995

1” MANDREL GILMER COG PULLEYS

15 Tooth Cog Pulley16 Tooth Cog Pulley17 Tooth Cog Pulley19 Tooth Cog Pulley


P/NDESCRIPTION1” Bore X 1” Wide Cog Pulleys For Mandrels

28 Tooth Cog Pulley30 Tooth Cog Pulley32 Tooth Cog Pulley28 Tooth Pulley Guard30 Tooth Pulley Guard


P/NDESCRIPTION5/8” Bore X 1” Wide Cog Pulleys For Dry Sump Pumps

28 Tooth Cog Pulley32 Tooth Cog Pulley

BRP 986-1BRP 988-1

P/NDESCRIPTION5/8” Bore X 1 1/2” Wide Cog Pulleys For Dry Sump Pumps

16 Tooth Cog Pulley17 Tooth Cog Pulley3” Diameter Crank Mounted V Pulley - comes with Pins7/16” Hat Washer1/2” Hat Washer


P/NDESCRIPTIONStackable Pin Style 1” Wide Cog Pulleys

28 Tooth Cog Pulley30 Tooth Cog Pulley32 Tooth Cog Pulley

BRP 1011BRP 1011-30BRP 1011-32

P/NDESCRIPTIONCog Water Pump Pulleys

BRP 1011

BRP 986-1

BRP 985BRP 981

60 Tooth (22 1/2” X 1”)64 Tooth (24” X 1”)68 Tooth (25 1/2” X 1”)

ALL 86132ALL 86134ALL 86136

P/NDESCRIPTIONCog Belts

ALL 86132

Uses BRP 952 or 952-2 Lower Pulleys

BRP 1041

1” MANDREL SERPENTINE PULLEY

BRP 948

2.5” Serpentine Pulley for 1” Mandrel BRP 948P/NDESCRIPTION


BELTS & PULLEYS

V BELT WATER PUMP PULLEYS

BRP 1002

7” Single Groove 15% Reduction Water Pump Pulley7” Double Groove 22% Reduction Water Pump Pulley7 3/4” Double Groove 30% Reduction Water Pump Pulley7” Double Groove 22 % Reduction Water Pump Pulley7” Double Groove 15% Reduction Water Pump Pulley


P/NDESCRIPTION MATCHING LOWERBRP 999BRP 1001-30BRP 1001-30BRP 1006 / BRP 1006B BRP 1001

BRP 1003 BRP 1053

BRP 1004 BRP 1050

V BELT CRANK PULLEYS

SBC 5 9/16” Diameter Single V Groove Crank PulleySBC 5 7/8” Diameter Double V Groove Crank PulleySBC 5 9/16” Diameter Double V Groove Crank PulleySBC 5 1/2” Diameter Double V Groove Crank PulleyBBC 5 1/2” Diameter Double V Groove Crank PulleyBBC 6” Diameter Double V Groove Crank PulleyFord 5” Double V Groove Crank PulleySBC 5” Double V Groove Crank PulleySBC / BBC 3 Hole Crank Pulley Spacer

BRP 999BRP 1001BRP 1001-30BRP 1006BRP 1006BBRP 1006B-6BRP 1033BRP 1034BRP 1035

P/NDESCRIPTION

Lower Ford SVO Pulley Spacer .250” ThickLower Ford SVO Pulley Spacer .375” Thick

BRP 1030BRP 1031

P/NDESCRIPTIONLower Pulley Spacers

BRP 999 BRP 1001 BRP 1001-30

BRP 1006B BRP 1006B-6

BRP 1006

BRP 1033 BRP 1034

1” O.D. ALUMINUM CRANK DRIVE MANDRELS

SBC Mandrel - 3 1/2” Long X 1” DiameterSBC Mandrel - 4 1/2” Long X 1” DiameterBBC Mandrel - 3 1/2” Long X 1” DiameterBBC Mandrel - 4 1/2” Long X 1” Diameter1/8” X 1/8” X 3 1/4” Key for 3 1/2” Mandrels1/8” X 1/8” X 4 1/4” Key for 4 1/2” Mandrels3/16” X 3/16” X 5/8 Key for SB


P/NDESCRIPTION

BRP 980

BRP 976

1/8” x 1/8” Keyway - 2” Long7/16” Steel Small Block Mandrel End Cap1/2” Steel Big Block Mandrel End Cap7/16” Aluminum mandrel End Cap1/2” Aluminum Mandrel End Cap

BRP 970BRP 971BRP 971BBRP 978BRP 978-1

P/NDESCRIPTIONMandrel Accessories

1” O.D. 3 BOLT DRIVE MANDRELS

SBC Drive Mandrel - 2 1/4” LongSBC Drive Mandrel - 3 1/4” Long

BRP 942BRP 943

P/NDESCRIPTION1” Drive Mandrels for BRP 1006/1006B Lower Pulleys

BRP 942

SEE PAGE 138 FOR ALL PULLEYS THAT STACK ON THESE 1” O.D. MANDRELS


BELTS & PULLEYS

ALTERNATORS

Alternator Mount Assembly for GM Delco AlternatorAlternator Mount Assembly for Powermaster AlternatorSBC New Style Alternator Mount Assembly for Powermaster AlternatorBBC New Style Alternator Mount Assembly for Powermaster AlternatorBBC New Style Alternator KIT - Comes With Mount, Pulley & Belt




Powermaster 1 Wire Alternator - No PulleyPowermaster 1 Wire Alternator with 2 7/8” V PulleyPowermaster 1 Wire Alternator with BRP 991 Serpentine Pulley

POW 8172-BRPOW 8172POW 8172-172

P/NDESCRIPTION

POW 8172

ALTERNATOR MOUNTS

BRP 9068BRP 941-10 Note- Alternators Sold Separately

POW 8172-172

V BELTS

V Belt for Delco Alternator using BRP 941 Mounting AssemblyV Belt for Powermaster Alternator (BRP 941-10 and BRP 950-1) V Belt for Powermaster Alternator (BRP 941-10 and BRP 1032 pulley)V Belt for Powermaster Alternator (BRP 9068/9135 Mount with 2 7/8” Pulley)

BRP 937BRP 937-1BRP 937-2BRP 937-3

P/NDESCRIPTION LENGTH33 1/2”26 1/2”

27”27 1/2”

3 1/4” Diameter Water Pump Mounted V Pulley - Drives Alternator3 3/4” Diameter Water Pump Mounted V Pulley - Drives Alternator

BRP 1032BRP 1032-1

P/NDESCRIPTION

WATER PUMP DRIVE PULLEYS

BRP 1032

V BELT POWER STEERING PUMP PULLEYS

V BELT ALTERNATOR PULLEYS

6” V Belt Power Steering Pulley - 1/2” Belt6” V Belt Power Steering Pulley - 3/8” BeltPower Steering Pump with BRP 996 Pulley InstalledPower Steering Pump with BRP 996-1 Pulley Installed

BRP 996BRP 996-1BRP 580BRP 580-1

P/NDESCRIPTION

BRP 996

BRP 998

BRP 998

BRP 992CAN 75-209

P/NDESCRIPTION5” Diameter X .670” Bore Delco Alternator V PulleyAdaptor to Fit BRP 998 V Pulley to Powermaster/Denso AlternatorDimensions - O.D. - 17mm/.670“ I.D. 15mm/.591”2 7/8” Diameter Powermaster Alternator V Pulley


FUEL SYSTEM & ACCESSORIES

Holley 650 CFM 4 Barrel 4777 CarburetorHolley 650 CFM 4 Barrel HP CarburetorHolley 500 CFM 2 Barrel Carburetor1/4”C Air Cleaner Stud with 5/16”C HP Carb Adaptor

HOL 4777SHOL 80541-1HOL 4412SALL 26056

P/NDESCRIPTION

CARBURETORS

HOL 4777 HOL 80541-1

CARBURETOR PARTS

Holley Carb Jets - Available from 58 - 98 (Sold per pair)*Add jet size to end of part numberCarb Jet Plate - Black Anodized

HOL 122-___*BRP 360

P/NDESCRIPTIONCarb Jets

Power Valve - 3.5 In. HgPower Valve - 4.5 In. HgPower Valve - 5.0 In. HgPower Valve - 5.5 In. HgPower Valve - 6.5 In. HgPower Valve - 8.5 In. Hg

HOL 125-35HOL 125-45HOL 125-50HOL 125-55HOL 125-65HOL 125-85

P/NDESCRIPTIONPower Valves

.110” Needle and Seat for 4777 Carburetor (sold each)

.120” Needle and Seat for HP Carburetor (sold in packs of 2)Sight Plugs (sold in packs of 2)

HOL 6-504HOL 6-518-2HOL 26-13

P/NDESCRIPTIONNeedle & Seats/Sight Plugs

CARBURETOR COVERS

BRP 360

HOL 122-___

HOL 125-35

HOL 26-13

HOL 6-504

Standard Carburetor CoverAluminum Carburetor CoverCarburetor Tuning Hat - Allows Adjustment While Engine is Running(Has Built In Filter)

REB 300-8900ROD S6012

ALL 26042

P/NDESCRIPTION

ALL 26042REB 300-8900

THROTTLE LINKAGES

18” Throttle Linkage (comes with rod ends)21” Throttle Linkage (comes with rod ends)24” Throttle Linkage (comes with rod ends)

AFC 10175-18AFC 10175-21AFC 10175-24

P/NDESCRIPTION19 1/8” - 19 7/8”22 1/8” - 22 7/8”25 1/8” - 25 7/8”

RANGEAdjustable Throttle Linkages

SBC Throttle Rod Assembly (comes with rod ends)BBC Throttle Rod Assembly (comes with rod ends)

BRP 410R-3BRP 410R-4

P/NDESCRIPTION14 3/8” - 15 3/8”16 3/8 - 17 3/8”

RANGEDirt Modified Throttle Linkages

AFC 10175-18

BRP 410R-3

BRP 370

Holley Carburetor Throttle Linkage Bushing Kit (with bolt & nut) BRP 370P/NDESCRIPTION

ALL 26056

See Page 124 For Carburetor Gaskets

See Page 124 For Bowl/Metering Block Gaskets

ROD S6012


FUEL SYSTEM & ACCESSORIESTHROTTLE RETURNS

FUEL LOGS

BRP Fuel Log - Has AN 8 Inlet, AN 4 Outlet for Guage / Return(comes with carburetor fittings, and AN 4 cap if gauge isn’t used)1 1/2” Diameter X 16” Long Large Fuel Log (comes with the following:2- BRP 5052, 1- XRP 981608, 1- XRP 981644, 1- XRP 992904)

BRP 5045

BRP 5044

P/N REDDESCRIPTION P/N BLACK

BRP 5045BKBRP 5045

FUEL PUMPS / PUSH RODS

MOR 64927

Carter SBC Billet Pump - AN 10 Inlet / AN 8 Outlet (comes with fittings)Carter BBC Billet Pump - AN 10 Inlet / AN 8 Outlet (comes with Fittings)Carter SBC Cast Pump - 1/4” NPT Inlet & Outlet (no fittings)Pro Cam SBC 6 Valve 7 1/2 psi Pump - 1/2” NPT Inlet & Outlet (no fittings)Pro Cam SBC 6 Valve 15 psi Pump - 1/2” NPT Inlet & Outlet (no fittings)Pro Cam SBC 6 Valve 11 psi Pump - 1/2” NPT Inlet & Outlet (no fittings)Allstar SBC Cast pump - comes with AN8 fittings

CTR M7900GCTR M7901GCTR M4891PRC 9351PRC 9350PRC 9350-1ALL 40266

P/NDESCRIPTION

PRC 9351CTR M4891 CTR M7901G

Did You Know...A fuel pressure regulator is

recommended on fuel pumps with8 psi and greater pressure.

FUEL PRESSURE REGULATORS

AFS 13205

Fuel Pressure Regulator - Adjustable 5 - 12 psi (includes mount, no fittings)Has 3/8” NPT Inlet and Outlet with 1/8” NPT Gauge Port By AeromotiveFuel Pressure Regulator - Adjustable 5 - 12 psi (includes mount, no fittings)Has 3/8” NPT Inlet and Outlet with 1/8” NPT Gauge Port By Allstar

AFS 13205

ALL 40290

P/NDESCRIPTION

Throttle Return Kit for Holley 4150/4777 Carburetors (comes with springs)Throttle Return Kit (comes with springs)Throttle Return Spring

MOR 64927ROD S2083BRP 379

P/NDESCRIPTION

*see page 124 for replacement gaskets*

BRP 379

FUEL PUMP BLOCK PLATES

Small Block Chevy with HoleBig Block Chevy No HoleSmall Block Chevy No Hole


P/NDESCRIPTION

CARBURETOR FITTINGS

AN 6 Short (comes with aluminum crush washer)AN 6 Long (comes with aluminum crush washer)AN 8 Long (comes with aluminum crush washer)AN 10 Long (comes with aluminum crush washer)Replacement Aluminum Crush Washers (sold in packs of 2)

BRP 5048BRP 5049BRP 5052BRP 5053

DESCRIPTION P/N RED P/N BLACK

BRP 5052BK

BRP 5046A

Aluminum Carb Fittings

BRP 5048BRP 5049BRP 5052BRP 5053

AN 8 Male to 5/8”F Male With Brass Crush WasherAN 10 Male to 5/8”F Male with Brass Crush Washer

CTR 156-386CTR 156-385

P/NDESCRIPTION

CTR 156-386


Fuel Pump pushrod for crate engines - SBC with cast iron camshaftBronze Tip Fuel pump pushrod for SBC with steel camshaft

COM 4616COM 4607

P/NDESCRIPTIONFuel Pump Pushrods

Fuel Pumps

BRP 5044 BRP 5045BK

ALL 40290



1/2” NPT1/2” NPT1/2” NPTAN 6AN 8AN 10AN 121/2” NPT

BRP 5032BRP 5032-8BRP 5032-10BRP 5037BRP 5038BRP 5039BRP 5040BRP 5031

P/N REDINLET1/2” NPTAN 8AN 10AN 6AN 8AN 10AN 12AN 10

OUTLET P/N BLACK

BRP 5032-8BKBRP 5032-10BK

BRP 5039BK

BRP 5031BK

ELEMENTPAPERPAPERPAPERPAPERPAPERPAPERPAPERSTAINLESS

TUBE STYLE FUEL FILTERS

TUBE STYLE FUEL FILTER MOUNTS

Fuel Filter Assemblies

Replacement Filter Elements

Replacement Paper Element (gasoline) 7 MICRONReplacement Stainless Steel Element (gasoline and alcohol) 63 MICRON

BRP 5033AFC 84022

P/NDESCRIPTION

Replacement Parts

1/2” NPT End Cap with O-RingAN 8 End Cap with O-RingAN 10 End Cap eith O-RingTension SpringReplacement O-RingReplacement Red Anodized Body

BRP 5032CBRP 5038CBRP 5039CBRP 5041BRP 5042BRP 5043

P/NDESCRIPTION

BRP 5033

BRP 5032-8

BRP 5038C

BRP 5041BRP 5042

BRP 5034

FRAM CANISTER STYLE FUEL FILTERS

Fram Canister Style Fuel Filter (comes with mounting bracket)Fram Replacement Fuel Filter

ALL 40250ALL 40251

P/NDESCRIPTION

FUEL SHUT OFFS

ALL 40251

3/8” NPT Inlet and Outlet Fuel Shut Off1/2” NPT Inlet and Outlet Fuel Shut Off

KBP 215KBP 216

P/NDESCRIPTION

FUEL ADAPTOR FITTINGS

AN 10 Female to AN 8 MaleAN 8 Female to AN 10 MaleAN 6 Female to AN 8 MaleAN 8 Female to AN 6 Male1/2” NPT Female to AN 8 MaleAN 10 Female to AN 12 Male

XRP 995011BRP 5051XRP 995108XRP 995008BRP 5070XRP 995112

P/NDESCRIPTION

KBP 215

XRP 995011

CARBURETOR SPACERS

3/16” Thick Aluminum Open Hole Spacer - Black Anodized1/4“ Thick Aluminum Open Hole Spacer - Black Anodized1” Thick Aluminum Open Hole Spacer - Black Anodized

BRP 9091BRP 9092BRP 372

P/NDESCRIPTION

BRP 372

Open Spacers

1/4” Thick Aluminum 4 Hole Spacer - Black Anodized1” Thick Phenolic 4 Hole Spacer1/2” Thick Phenolic 4 Hole Spacer - Used on Brodix 358 Spec Intake

BRP 9095CAN 85-150CAN 85-152

P/NDESCRIPTION4 Hole Spacers

CAN 85-150

Fuel Filter Mount For 1 1/4” TubingFuel Filter Mount For 1 1/2” TubingFuel Filter Mount For 1 3/4” Tubing

BRP 5034BRP 5035BRP 5036

DESCRIPTION P/N RED P/N BLACKBRP 5034BKBRP 5035BK

BRP 5039BK

BRP 9091

ALL 40250


FUEL SYSTEM & ACCESSORIESCARBURETOR ADAPTORS

Aluminum 2 Barrel to 4 Barrel AdaptorAluminum Adjustable 2 Barrel to 4 Barrel AdaptorPhenolic 2 Barrel GM Manifold to 2 Barrel Holley CarburetorAluminum Adjustable 2 Barrel Carburetor to 4 Barrel Manifold with Radiusedbottom for Increased HorsepowerTapered 4 Hole Carb Spacer - Fits Inside Intake (not Dirt Legal)Straight 4 Hole Carb Spacer - Fits Inside Intake (not Dirt Legal)5/8” Thick Open Hole Carburetor Insulator (Includes 2 BRP 9092 & 3 MRG 54)5/8” Thick 4 Hole Carburetor Insulator (Includes 2 BRP 9095 & 3 MRG 55)

BRP 377BRP 375CAN 85-050


P/NDESCRIPTION

AIR FILTERS

BRP 377 BRP 375

CAN 85-050 BRP 376 See Page 110 For Carburetor Gaskets

GRN 2160 K-N E3770

14” X 3” Air Filter Element14” X 4” Air Filter Element14” X 5” Air Filter Element14” X 6” Air Filter Element11” X 5” Air Filter Element11” X 6” Air Filter Element14” Extreme Top

GRN 2012GRN 2030GRN 2071GRN 2160GRN 2113GRN 2350

GREEN FILTERDESCRIPTION K&N FILTERK-N E1650K-N E3750K-N E3760K-N E3770K-N E3680K-N E3690K-N 66-1401

PRE FILTERS

14” X 3”14” X 4”14“ x 4” With High Flow Top14” X 5”14“ X 5” With High Flow Top14” X 6”14“ X 6” With High Flow Top11” x 6”Regular Valve Cover BreatherShielded Valve Cover Breather

BLUEDESCRIPTION BLACKOUT 10-1141-01OUT 10-1002-01OUT 10-1014-01OUT 10-1004-01OUT 10-1020-01OUT 10-1026-01OUT 10-1160-01OUT 10-1199-01OUT 10-1013-01OUT 10-1018-01

RED K&N FOAM

OUT 10-1002-02

OUT 10-1004-02OUT 10-1020-02OUT 10-1026-02

OUT 10-1013-02

OUT 10-1002-03

OUT 10-1004-03

OUT 10-1026-03OUT 10-1160-03OUT 10-1199-03OUT 10-1013-03OUT 10-1018-03

K-N 25-3750

K-N 25-3760

K-N 25-3770

AIR FILTER HOUSINGS

AIR FILTER OIL / CLEANER

12.25 OZ Can Air Filter Oil (sold each)32 OZ Air Filter Cleaner128 OZ Air Filter Cleaner

K-N 99-0516K-N 99-0621K-N 99-0635

P/NDESCRIPTION

ALL 26094

14” Sure Seal Top with Drop Base Bottom Assembly14” Sure Seal Top Only14” Drop Base Bottom Only14” Flat Top Only14” Flat Base Only11” High Flow Air Filter Top (with built in filter)14” High Flow Air Filter Top (with built in filter)

ALL 26094ALL 26090ALL 26091K-N 85-6842K-N 85-1541K-N 66-1101K-N 66-1401

P/NDESCRIPTION

AIR FILTER NUTS

BRP 380

1/4” Air Filter Nut With O-Ring5/16” Air Filter Nut With O-Ring

BRP 380BRP 380-1

P/NDESCRIPTION

1/2” Air Cleaner Spacer1” Air Cleaner Spacer1 1/2” Air Cleaner Spacer

ALL 26085ALL 26086ALL 26087

P/NDESCRIPTION

ALL 26087

Air Cleaner Spacers


FUEL SYSTEM & ACCESSORIESFUEL LINE KITS

Complete AN 8 Fuel Line Kit For Dirt Modified Chassis (Brass Fittings)Contains the following: 8 ft- XRP 340008, 1- XRP 260088, 2- XRP 240008,1- KBP 216, 1- KBP 232 1- XRP 249008.Complete AN 10 Fuel Line Kit For Dirt Modified Chassis (Brass Fittings)Contains the following: 8 ft- XRP 340010, 1- XRP 260010, 2- XRP 240010,1- KBP 216, 1- KBP 232, 1- XRP 249010.Complete AN 8 Fuel Line Kit For Dirt Modified Chassis (Aluminum Fittings)Contains the following: 8 ft- XRP 340008, 1- XRP 239008, 3- XRP 230008,1- XRP 981688, 1- XRP 991104, 1- KBP 216.Complete AN 10 Fuel Line Kit For Dirt Modified Chassis (Aluminum Fittings)Contains the following: 8 ft- XRP 340010, 1- XRP 239010, 3- XRP 230010,1- XRP 981610, 1- XRP 991104, 1- KBP 216.

KBP 301

KBP 302

KBP 301A

KBP 302A

P/NDESCRIPTION

KBP 301

FUEL SAFE FUEL CELLS

F-S RB224

F-S RB224Options include:-24 gal capacity

-Sportsman Bladder- Steel Fill Plate

With Cap- AN 10 Pick Up

- AN 8 Vent with check valve-Dipstick Installed

Fuel Safe 24 Gallon Fuel CellDimensions - 25”w X 16 3/4”d X 14 1/2”hAluminum Fuel Cell Can (sold separately)

F-S RB224BRP 1598-24

P/NDESCRIPTION

BRP PLASTIC FUEL CELLS

* Fuel Cell Cases are Sold Seperately - Add 1/2” toto Fuel Cell Dimensions for Case Sizes.

5 gal8 gal

15 gal22 gal22 gal32 gal

KBP 105KBP 108KBP 115KBP 122KBP 123KBP 132

BAREBLADDER

CAPACITYUS GAL.

BLADDER DIMENSIONSW X D X H

14” X 11” X 8 1/4”17” X 12 1/2” X 9”

25“ X 17” X 9“24” X 24” X 9”

25” X 17” X 14”25” X 17” X 18”

COMPLETE BUDGETTOP & FOAM

ALUMINUMCASE*

STEELCASE*

KBP 105BKBP 108BKBP 115BKBP 122BKBP 123B

KBP 132B- No Foam

N/AN/AN/A

BRP 1595BRP 1598-24BRP 1598-32

BRP 1592SN/A

BRP 1594SBRP 1595S

N/AN/A

Complete 32 Gallon Fuel Cell with Aluminum Case KBP 132B-CP/NDESCRIPTION

PLASTIC FUEL CELL ACCESSORIES

KBP 123B

Budget Top Assembly (Includes Inner Ring, Budget Base, andBudget Filler Cap) - Gasket sold SeperatelyReplacement Inner RingReplacement Budget BaseReplacement Budget Filler CapReplacement Gasket for KBP 100 Budget Filler CapReplacement 12 Bolt Gasket45° Budget Quick Fill Assembly3/8” Corner Pick-Up1/2” Corner Pick-Up

KBP 95KBP 98KBP 97KBP 100KBP 100-1F-S 1GAS79KBP 88KBP 240KBP 241

P/NDESCRIPTION

KBP 88KBP 100

KBP 95F-S 1GAS79

KBP 240

Uses BRP 1542 Or BRP 1540 Fuel Cell Straps

Use BRP 1542 Fuel Cell Straps for 22 gallon, BRP 1543 For 32 gallon

Dipstick AssemblyStandard Fuel Cell Strap for 24 gallon cells (sold in pairs)Fuel Cell Straps for 32 gallon fuel cells (sold in pairs)1” X 1” Fuel Cell Straps - DIRTCar Approved for Syracuse (sold in pairs)

F-S FL08BRP 1542BRP 1543BRP 1540

P/NDESCRIPTIONDipsticks and Fuel Cell Straps

F-S FL08

KBP 302A



QUICK FILL PARTS

Female Dry Brake ValveMale Dry Brake ValveFuel Catch CanSpring Loaded Over Flow Vent Valve11 gallon Dump CanQuick Fill 45° Fill Plate

RRP R15-001RRP R17-001-09ALL 10102ALL 40203ALL 10100F-S QF345

P/NDESCRIPTION

CLEAR FUEL / VENT HOSE

1” I.D. Clear Hose - sold by the foot1 1/4” I.D. Clear Hose - sold by the foot1 3/4” I.D. Clear Hose - sold by the foot2 1/4” I.D. Clear Hose - 5 foot piece2 1/4“ I.D. Clear Hose - 10 foot piece3” I.D. Clear HoseFlexible 2 1/4” Plastic Elbow

F-S CH100F-S CH125F-S CH175ALL 40168-5ALL 40168-10F-S CH300RJS 90907

P/NDESCRIPTION

RRP R15-001RRP R17-001-09

ALL 10102

ALL 40203

FUEL CELL FOAM

4” X 8” X 8”12” X 16” X 4”

KBP 99KBP 99-1

P/NDESCRIPTION5 Gal8 Gal

15 Gal22 Gal

CELL KBP 99 KBP 99-134

1012

1234

KBP Fuel Cell Foam Capacity

FUEL CELL GASKETS

12 Bolt Round Gasket for Regular Cap (KBP 86 Base)12 Bolt Round Gasket for Budget Cap (KBP 97 Base)24 Bolt Oval Gasket12 Bolt Oval Gasket

F-S 1GAS78F-S 1GAS79F-S 1GAS97F-S 1GAS98

P/NDESCRIPTION

REGULAR 12 BOLT FILLER CAPS

CHECK VALVES

Regular 12 Bolt Top Base (used on F-S RB224 Fuel Cells)Regular 12 Bolt Fuel Cell Cap

KBP 86KBP 101

P/NDESCRIPTION

KBP 86 KBP 101

UPRIGHT DRAG FUEL CELL

AN 6 Check ValveCheck Valve for 1” Hose

KBP 70KBP 80

P/NDESCRIPTION

KBP 70

Jaz Upright Drag Fuel Cell - 3 Gallon CapacityFlush Mount Top Assembly

JAZ 250-003-01KBP 102

P/NDESCRIPTION

KBP 102

JAZ 250-003-01

1 1/4” Fuel Cell Vent Adaptor - adapts 1 1/4“ vent to 3/8” NPT BRP 9070P/NDESCRIPTION

Fuel Cell Vent Adaptor

BRP 9070


HEADERS & EXHAUSTSMALL BLOCK / CRATE ENGINE HEADERS

1 5/8” Primary - 3” Collector602 Crate Engine - 1 5/8” Primary - 3” Collector - Dirt Legal1 5/8” to 1 3/4” Primary - 3” Collector -Oval Port Steel Head358 Brodix Spec Head - 1 3/4” to 1 7/8” Primary - 3 1/2” Collector1 5/8” to 1 3/4” Primary - Tri Y - 3” Collector 358 Brodix Spec Head - 1 5/8” to 1 3/4” Primary - 3” CollectorOpen Small Block Tri-Y Header Upswept 1 5/8 x 1 7/8 x 3” Collector

SCH 1122BSCH 1122BCMSCH 1122BV-3SCH 1124BVSCH 1122VYSCH 1122BVSH-3BEY NEDMSBTYUA-D1-3

P/NDESCRIPTION

BIG BLOCK CHEVY HEADERS

2” Primary - 3 1/2” CollectorBeyea Upswept Big Block Tri-Y Header 2 X 2 1/8 X 3” Collector

SCH 2123BEY NEDMBBTYUSS4

P/NDESCRIPTION

SBC CONVENTIONAL CROSSOVER

1 5/8” Primary - 3” Collector1 3/4” Primary - 3 1/2” Collector1 3/4” Primary - 3” Collector602 Crate Engine - 1 5/8” Primary - 3” Collector

SCH 145SCH 146SCH 146-3SCH 145CM

P/NDESCRIPTION

SBC STREET STOCK

1 5/8” Primary - 3” Collector1 3/4” Primary - 3 1/2” Collector602 Crate Engine - 1 5/8” Primary - 3” Collector

SCH 185SCH 186SCH 185CM

P/NDESCRIPTIONMonte Carlo, Grand Prix, Cutlass, Regal

MODIFIED TAIL PIPE KITS

Tail Pipe Kit for 3” Collector (comes with 4 elbows and 2 tailpipes)Tail Pipe Kit for 3” Collector to 3 1/2” Lower Elbow (comes with 4 elbows and 2 tailpipes)Replacement Tabs for Tail PipesReplacement Oval Tailpipe Tip Only

BEY DMTPK-3

BEY DMTPK-3.5BEY TABSBEY DMTPT-30

P/NDESCRIPTION

MODIFIED TORQUE PLATE INSERTS

Torque Plate Insert Kit for 3” CollectorTorque Plate Insert Kit for 3 1/2” Collector

BEY DMTPQ-3BEY DMTPQ-3.5

P/NDESCRIPTION

Kits come complete with 2 collector elbows,2 tailpipe elbows and 2 tailpipe tips


HEADERS & EXHAUSTMUFFLERS

3” Inlet / 3” Outlet - 8” Long X 5” O.D.3 1/2” Inlet / 3 1/2” Outlet - 8” Long X 5” O.D.3” Inlet / 3” Outlet - 12” Long X 5” O.D.3 1/2” Inlet / 3 1/2” Outlet - 12” Long X 5” O.D.

EXT 30830EXT 30835EXT 31230EXT 31235

P/NDESCRIPTION

3” Inlet / 3” Outlet - 16” Long X 6” O.D.3 1/2” Inlet X 3 1/2” Outlet - 16” Long X 6” O.D.3 1/2” Inlet X 3” Outlet - 16” Long X 6” O.D.3 1/2” Inlet X 3 1/2” Outlet - 12” Long X 6” O.D. - Stainless Steel

DMX 17223DMX 17224DMX 17539DMX 17268

P/NDESCRIPTION

EXT 30830

DMX 17223

UNIVERSAL MUFFLER HANGERS

Universal Exhaust Hanger - Saddle Style (sold each)Fits 4 1/2” - 6” Mufflers - clamps to 1 1/2“ tubingUniversal Exhaust Hanger - Hanging Style (sold each)Fits 5” Mufflers - clamps to 1 1/2” tubing

BRP 9263

BRP 9266

P/NDESCRIPTION

BRP 9263 BRP 9266

UNIVERSAL TAILPIPE HANGERS

3” Inlet / 3” Outlet - 8” Body X 4 1/2” O.D. (12 1/2“ total length)3 1/2” Inlet / 3 1/2” Outlet - 8“ Body X 4 1/2” O.D. (12 1/2” total length)

BEY MUF3DMBEY MUF3.5DM

P/NDESCRIPTION

BEY MUF3DM

3 1/2” Inlet / 3 1/2” Outlet - 8” Long X 4” O.D.3 1/2” Inlet / 3 1/2” Outlet - 10” Long X 4” O.D. - Fiberglass Packed3 1/2” Inlet / 3 1/2” Outlet - 12” Long X 4” O.D.3” Inlet / 3” Outlet - 8” Long X 4” O.D.

SCH 83535SCH 103535KSCH 123535SCH 83030

P/NDESCRIPTION

SCH 83535

Universal Tailpipe Hanger (sold each)- will fit 3” round or oval tailpipes and mounts to 1 1/4” tubing BRP 9324

P/NDESCRIPTION

BRP 9324


HEADERS & EXHAUST

ELBOWS & EXHAUST PIPES

Turn Out - 3”30° Elbow - 3“ 6 1/2” x 6 3/4“30° Elbow - 3” 15 1/2“ X 6”

42° Elbow - 3”45° Elbow - 3“90° Elbow - 3”

Turn Out - 3 1/2“30° Elbow - 3 1/2”45° Elbow - 3 1/2“90° Elbow - 3 1/2”

SCH 3025SCH 3031SCH 3032SCH 3042SCH 3045SCH 3090SCH 3525SCH 3531SCH 3545SCH 3590

P/NDESCRIPTION24” Long Straight - 3”36” Long Striaght - 3”

24” Long Straight - 3 1/2”36” Long Straight - 3 1/2”

3 1/2” O.D. to 3” I.D Reducer3” O.D. to 3 1/2” I.D. Expander3” I.D. to 2 1/2” O.D. Reducer

SCH 240030SCH 360030SCH 240035SCH 360035

SCH 3530SCH 3035SCH 2530

P/NDESCRIPTION

GASKETS / PORT COVERS / BOLTSHeader Gaskets

SBC Port CoverBBC Port CoverFORD SVO Port Cover

BRP 5148BRP 5127BRP 5132

P/NDESCRIPTIONPort Covers

-Sold Individually-Red Anodized

See Page 124 forMore Header Gaskets

SCH SO063041

SCH 240030

SCH 3031

BRP 5148

SCH 01560

1 5/8” X 3“ SlipOn Collector1 3/4” X 3” Slip On Collector1 3/4” X 3 1/2” Slip On Collector1 7/8” X 3 1/2” Slip On Collector2” X 3 1/2” Slip On Collector

SCH SO063041SCH SO073041SCH SO073541SCH SO083541SCH SO003541

P/NDESCRIPTION

SBC 1 5/8” Port GasketSBC 1 3/4” Port GasketSBC Crate Engine GasketSBC Brodix Spec HeadBBC Square Port GasketBBC Round Port Gasket18° BBC Head3/8” X 3/4” Hex Head Bolt

SCH 01510SCH 01560SCH 01570SCH 02510SCH 02520

SCH 3006-12

SCHOENFELDDESCRIPTION FEL PROFEL 1404FEL 1405

FEL 1406FEL 1412

FEL 1482

ASSORTED BEND KIT

1 5/8” Assorted Bent Tubing1 3/4” Assorted Bent Tubing1 7/8” Assorted Bent Tubing2” Assorted Bent Tubing2 1/8” Assorted Bent Tubing

SCH MB162SCH MB175SCH MB187SCH MB200SCH MB212

P/NDESCRIPTION

EXHAUST WRAP

Insulating Wrap- 2” Wide X 50 Feet Long (Avg 100 feet needed) LON 6487P/NDESCRIPTION

COLLECTORS


TOOLS, TIRE GAUGES, & SCALESINTERCOMP WIRELESS SCALES

INTERCOMP WIRED SCALES

Intercomp Professional Wireless Scale System -Comes with 4 billet pads, all batteries & chargers,pad storage case, and USB cable for computer.

DESCRIPTION P/N

INT 170126-W

• Fully Integrated RFX Wireless Technology

• Encryption Ensures Secure Wireless Communication

• USB & RS232 Output• Certified to 0.1% Accuracy

• 1,500lb (700kg) Pad Capacity• 6,000lb (2,800kg) System Capacity

•Stores 100 Chassis Setups• Baseline Setup Recall

• Center of Gravity Calculation• User Selectable Display Modes

•Target Tune Feature• Giant 0.5˝, Backlit, Display Characters

• View Any Combination of Scale Pad Weight & Percentage

• 400 hr Average Battery Life in Pads

PROFESSIONALSW777RFX

• 1,500lb (700kg) Pad Capacity• 6,000lb (2,800kg) System Capacity

• Displays Setups toOne Hundredth of a Percent• Stores 100 Chassis Setups

• Baseline Setup Recall• User Selectable Display Modes

• View ANY Combination ofScale Pad Weight & Percentage• Center of Gravity Calculation

• Target Tune Feature• Certified to 0.1% Accuracy

• RS232 Output• Giant 0.5˝, Backlit, Display Characters

EZ WEIGH 500

INT 102018

Intercomp EZ Weigh Wired Scales- Comes with billet pads, and cabled indicator

DESCRIPTION P/N

INT 170125

SCALE ACCESORIES

Intercomp Scale Pad Protective Case (22” X 18” X 16”)Intercomp Scale Pad Laser Leveling System- WORKS ON ALL SCALESScale Pad Safety Chock - Stops car from rolling off scales- works with any scale pad that is 15 1/4” X 15 1/4”)Remote Chassis Ride Height Checker (has built in gauge)Frame Height Gauge (with scale pad height built in)

INT 490197

INT 102018

BRP 9323BRP 9240BRP 9364

P/NDESCRIPTION

INT 490197

BRP 9323

BRP 9240 BRP 9364


TOOLS, TIRE GAUGES & SCALESCASTER CAMBER GAUGES

Aluminum Bubble/Caster Camber Gauge withMagnetic Adaptor - Comes with Plastic Case

DESCRIPTION P/N

INT 102010

Bubble Caster/Camber Gauge Digital Caster/Camber Gauge

Digital Caster/Camber Gauge withMagnetic Adaptor - Comes with Plastic Case

DESCRIPTION P/N

INT 100005

Digital Angle Gauge

BRP 9316INT 102010 INT 100005

HD Digital Angle Gaugein aluminum housingStock Car Camber Adaptor(Adapts to BRP 9316)

DESCRIPTION P/N

BRP 9316

BRP 9317

KART LASER ALIGNMENT KITS

Deluxe Kart Laser Alignment Kit - Includes 1- rear axle laser adaptor,1- alignment mirror, 1- laser pointer, 1- BRP 9318 caster/cambergauge and plastic carrying caseStandard Kart Alignment Kit - Includes 1- rear axle laser adaptor, 1- alignment mirror, 1- laser pointer and plastic carrying caseReplacement Laser Pointer for BRP 9319 / BRP 9320Kart Digital Camber Gauge (comes with BRP 9316 and carrying case)

BRP 9319

BRP 9320BRP 9315BRP 9318

P/NDESCRIPTION

BRP 9319

BRP 9320

BRP 9325NOTE - DIGITAL ANGLE GAUGE SOLD SEPERATE

BRP 9325BRP 9316

Camber Adaptor - Fits on Steering Arm of Dirt Modified - adapts toBRP 9316 (sold separately)HD Digital Angle Gauge in Aluminum Housing

BRP 9325BRP 9316

P/NDESCRIPTION

BRP 9318

REAR END LASER ALIGNMENT KITS

Laser Rear End Checking Tool - Complete kit to check 3” tubes and quad lock rear ends (includes laser pointer)Laser String Tool - Pops onto Right Side Frame Rail to Allow Squaring Of Rear End (includes laser pointer)Replacement Laser Pointer For BRP 9311 / BRP 9314

BRP 9311

BRP 9314BRP 9315

P/NDESCRIPTION

BRP 9311


TOOLS, TIRE GAUGES, & SCALES

TIRE PRESSURE GAUGES

Digital Tire Pressure Gauge0 - 99.99 psiBRP Digital Pressure Gauge0 - 150psi

DESCRIPTION P/N

INT 360045

BRP 9260

Digital Tire Pressure Gauges Intercomp Tire Pressure Gauges Longacre Tire Pressure Gauge

0 - 15 psi - 2” Face0 - 30 psi - 2” Face0 - 60 psi - 2” Face

0 - 15 psi - 4” Glow In Dark Face0 - 30 psi - 4” Glow In Dark Face0 - 60 psi - 4” Glow In Dark Face

DESCRIPTION P/NINT 360062INT 360063INT 360064INT 360058INT 360059INT 360060

Glow-In-The-Dark

0 - 60 psi - 2” Face0 - 30 psi - 2” Face0 - 15 psi - 2” Face

DESCRIPTION P/NLON 52004LON 52024LON 52034

TIRE PYROMETERS / DUROMETERS

INT 360012 INT 360018-E

Deluxe Pyrometer with Tire Probe & Case(0° - 1,500°F)Infrared Laser Temperature Gun & Pouch(0° - 1,022°F)Intercomp DurometerBRP Tire Humidity Gauge - comes with case

DESCRIPTION P/N

INT 360012

INT 360018-EINT 360092BRP 9328

INT 360092

INT 360045

BRP 9260

TOE PLATES

BRP Aluminum Toe Plates (2 per set) BRP 9132P/NDESCRIPTION

BEAD BREAKERS

Wide Jaw Bead Breaker For 15” WheelsDESCRIPTION P/N

BRP 201

BRP 201

BRP 9328

7” 16 Grit Abrasive Tire Grinding Disc - (sold each)7” Tac-A-Disc - (sold each)7” 16 Grit Ventilated Tire Grinding Disc - (sold each)8” “Traction Grabber” Tire Grinding Disc6” “Traction Grabber” Tire Grinding Disc

DESCRIPTION P/NABR ID00861-0SMYR 42267ALL 44182BRT TGBRT TG-6

ABR ID00861-0S MYR 42267 ALL 44182All Discs Have A 7/8” Arbor Hole and fit most 7” Grinders and Buffers

Grinding Discs

BRT TG

TIRE GRINDING DISCS


TOOLS, TIRE GAUGES & SCALES

TIRE IMPROVER

Track Claw Tire Strengthener - 1 Gallon CanFast Track Tire Improver - 1 Gallon CanHot Lap Original Tire Treatment - 1 Gallon CanHot Lap II Tire Treatment - 1 Gallon CanPro Blend Tire Cleaner - 1 QuartCompetitive Edge Tire Improver

DESCRIPTION P/NTC 2995ALL 78103PB 7000TSPB 6000PB 7050ALL 78105

Portable Camair Air Dryer UnitTune-Up Kit for CAM CT-30P (new style)Replacement HoseHumidity IndicatorTune Up Kit - (old style)

DESCRIPTION P/NCAM CT-30PCAM DC-30CAM DS-20CAM DS1-1CAM TS-10K

Variable Speed Tire Rotator / Grinder - 110VSportsman Tire Rotator / Grinder - 110V

DESCRIPTION P/NDGR 1DGR SPORTSMAN-II

Tire Grinder

Air Dryers

Fixture for Measuring Tire Roll Out (diameter)10’ Tire Tape Measure

DESCRIPTION P/NBRP 9241BRP 40

Tire Rollout Fixture

TIRE GRINDERS & ACCESSORIES

TIRE SIPERS & GROOVERSVan Alstine Tire Groover

Heavy Duty Tire Groover

# 3# 4# 6# 8# 10# 12

DESCRIPTION P/NVAN V100

VAN 4GFVAN 6GFVAN 8GFVAN 10GF

Replacement Blades FLATROUNDVAN 3GRVAN 4GR

VAN 12GR

Van Alstine Tire Siper

Heated Siping Tool

36 pc

DESCRIPTION P/NVAN S- 100

VAN SIPING-BLADEReplacement Blades

Holds Up To 13 Blades!

Grooving ToolDESCRIPTION P/N

AFC ID125

Heated Single Blade Groover

#2 - .090”#3 - .125”#4 - .215”#5 - .290“#6 - .375”

SIZE BLADESAFC IDBL02AFC IDBL03AFC IDBL04AFC IDBL05AFC IDBL06

AFC IDHD02AFC IDHD03AFC IDHD04AFC IDHD05AFC IDHD06

HEADReplacement Blades

Tire Siping Tool - Holds 2,4, or6 Blades

DESCRIPTION P/N

HIC TS

Multi-Blade Tire Siper

Tire MarkerDESCRIPTION P/N

MRG 9312

*

Chain Link Tread Pattern Traction ClawBlock Tread Pattern Traction Claw


VAN V100

HIC TS

AFC ID125

VAN S-100

BRP 9355

TC 2995 ALL 78103 PB 7000TS PB 6000 ALL 78105

Tube Kit For DGR 1 Tire Grinder (sold seperate fromDGR 1) Bolts on to existing rotator to hold grinderUniversal Aluminum Grinder Head Kit

DESCRIPTION P/N

BRP 9375BRP 9376

Tire Grinder Attachments

BRP 9241

CAM CT-30P

BRP 40

DGR 1

BRP 9375Bolts on to existing tire

machine ( DGR 1)

BRP 9376

BRP 9375


TOOLS, TIRE GAUGES, & SCALESDRILLS & TAPS

Economy Stop WatchDual Split Stop Watch with MPH

ROB SC-501ROB SC-606W

P/NDESCRIPTION

STOP WATCHES

Double Sided 1/8” Drill Bit (2 per pack)Double Sided 3/16” Drill Bit (2 per pack)3/8”F LH Tap3/8”F RH Tap7/16”F LH Tap5/8”F LH Tap5/8”F RH Tap3/4”F LH Tap

BRT DED18BRT DED316BRT TO624LBRT TO624RBRT TO720LBRT T1018LBRT T1018RBRT T1216L

P/NDESCRIPTION

ROLLER CHANGE TOOL

SAFETY WIRE & PLIERS

CLECOS & PLIERS

Bob’s Tool - Makes Roller Changes Safe and Easy! BRP 4399P/NDESCRIPTION

Button Tool (sold each)1/8” Clecos (sold each)3/16” Clecos (sold each)Cleco Pliers (sold each)

SRI 1320LEF 101-19LEF 101-20LEF 100-131

P/NDESCRIPTION

Safety Wire Pliers360’ Safety Wire

AFC 80745AFC 80746

P/NDESCRIPTION

CORDLESS IMPACT WRENCHES

ZNEX 14.4V - 3/8” Drive Cordless Impact Gun(comes with carrying case, charger, and 1 battery)

DESCRIPTION P/N

ZNX CI-3140

14.4V - 3/8” Drive Cordless Impact

ZNEX 18.0V - 1/2” Drive Cordless Impact Gun(comes with carrying case, charger, and 1 battery)Replacement 18.0V Battery

DESCRIPTION P/N

ZNX CI-3181ZNX 382062

18.0V - 1/2” Drive Cordless Impact

.900” Deep with SpringReplacement Spring


Pit Sockets

BRP 4399

SRI 1320LEF 100-131LEF 101-19

AFC 80746AFC 80745

BRT DED18BRT TO720L

BRP 2044

ZNX CI-3140

ZNX CI-3181


PIT & SAFETY EQUIPMENTALUMINUM JACKS

3 Pump Aluminum Low Profile JackDirt Skirt For Aluminum JackDirt Wings For Aluminum Jack

BRU WARRIORBRU DS1BRU DIRT-WINGS

P/NDESCRIPTION

BRU DIRT-WINGS

BRU WARRIOR

BRU DS1

FUEL JUGS & FUNNELS

5 Gallon Jug - Red5 Gallon Jug - White5 Gallon Jug - Blue14” Triangle Fuel FunnelFunnel FilterReplacement Cap for 5 Gallon JugsJug Spout

VP 3512VP 3522VP 3532VP 3081VP 3091VP 3042VP 3044

P/NDESCRIPTION

TRANSPONDERS & RACECEIVERS

Transponder with ChargerDirect Wire TransponderOld Style Transponder HolderNew Style Transponder HolderCharger Kit

AMB X260AMB X260DAMB 2502AMB 2504AMB 2423

P/NDESCRIPTION

PAULSON GOGGLES

AMB X260

AMB X260D

AMB 2502 AMB 2504

RAC 1600

Raceceiver - Comes with Clip and Batteries (no earpiece)Drivers EarpieceReplacement Foam For Earpiece (sold in pairs)Replacement Radio Holder

RAC 1600RAC DEPRAC EPFRAC HOLSTER

P/NDESCRIPTION

Clear Paulson Goggles (sold each)Amber Paulson Goggles (sold each)Smoke Paulson Goggles (sold each)

PAU 105PAU 105LAPAU 105S

P/NDESCRIPTION

CLEANERS / MUDD OFF

Helmet Fresh - (kills bacteria in helmets which causes odor)Plexus Plastic Cleaner - 13oz Spray CanMudd Off Concentrate - Mix 1:12 with water

BRK 95-9540ALL 78232MUD 11022

P/NDESCRIPTION

VP 3081

RAC HOLSTER


PIT & SAFETY EQUIPMENTFIRE SUPPRESSION SYSTEMS

5 LB FE36 Complete System - Pull Cable Style 5 LB Halon Complete System - Pull Cable Style5 LB Halon Complete System - Push Knob Style10 LB Halon Complete System5 LB Halon Bottle Only (charged)10 LB Halon Bottle Only (charged)10 Ft Aluminum 1/4” O.D. Tubing12 Ft Steel 1/4” O.D. Tubing

SAF LT5-HAASAF LT5-AAASAF LT5-ABASAF LT10-AAASAF LT5-AASAF LT10-AASAF 54-2001SAF 54-2002

P/NDESCRIPTION

WINDOW NETS

SAF LT5-AAA

RJS 50524-1

RJS 50523

RJS 50525 RJS 50525MN18” X 24” Ribbon Net - Black18” X 24” Ribbon Net - Blue18” X 24” Ribbon Net - Red18” X 24” Mesh Net - BlackOblong Window Net - BlackSprint / Midget / TQ - 4 Point Window Net - BlackSprint / Midget / TQ - 2 Point Window Net - BlackWindow Net BarWindow Net Installation Kit

RJS 50525RJS 50525-3RJS 50525-4RJS 50525MNRJS 50523RJS 50524RJS 50524-1BRP 5089RJS 90906

P/NDESCRIPTION

DRIVER RESTRAINTS

Arm RestraintHelmet Restraint

RJS 50522RJS 20214

P/NDESCRIPTION

SEAT BELTS & ACCESSORIESRJS Wrap Around

Shoulder Bolt In LapRJS Individual Bolt Shoulder Bolt In Lap

BlackBlueRed

COLOR P/NRJS 02-19-06RJS 02-19-06-3RJS 02-19-06-4

BlackCOLOR P/N

RJS 02-18-06 BlackBlueRed

COLOR P/NRJS 02-16-06RJS 02-16-06-3RJS 02-16-06-4

RJS Single Bolt ShoulderBolt In Lap

Floor Mount HarnessShoulder Pad - Black

DESCRIPTION P/NRJS 30309RJS 70702

6 Point Pull Down Seat Belt -3” Lapand 3” Shoulder - Bolt In or Wrap6 Point Pull Down Seat Belt Set - 3” Lap, 2” Shoulder - Hans Campatible

SIM 29073BK

SIM 29063BK-30010BK

P/NDESCRIPTIONSimpson Seat Belts

Available In Black Only

BRP 5089

RJS 90906


PIT & SAFETY EQUIPMENTFIRE SUITS

One Piece Single Layer - BlackOne Piece Single Layer - BlueOne Piece Single Layer - Red

RJS 1004RJS 1004-3RJS 1004-4

P/NDESCRIPTION

NOMEX UNDERWEAR

RJS Proban One Piece Single Layer

Available Sizes - XS,S,M,L,XL,XXLCustom Suits Can Be Special Ordered.

Slit Style Open Momex HoodFull Face Open Nomex Hood

RJS 20205RJS 20215

P/NDESCRIPTIONNomex Hoods

Nomex Socks - SmallNomex Socks - MediumNomex Socks - LargeNomex Socks - Extra Large

RJS 20204SRJS 20204MRJS 20204LRJS 20204XL

P/NDESCRIPTIONNomex Socks

Nomex Underwear - SmallNomex Underwear - MediumNomex Underwear - LargeNomex Underwear - Extra Large

RJS 20203SRJS 20203MRJS 20203LRJS 20203XL

P/NDESCRIPTIONNomex Underwear (2 Piece)

NOMEX GLOVES & SHOESDriving Gloves

BlackBlueRed

SINGLE LAYER P/NRJS 20213RJS 20213-3RJS 20213-4

BlackBlueRed

DOUBLE LAYER P/NRJS 20212RJS 20212-3RJS 20212-4

Nomex Driving Shoes - Black - Full Sizes Only (Size 8-13) RJS 20209N-SIZEP/NDESCRIPTION

Nomex Shoes

NECK BRACES

360° STYLEU STYLE

BlackBlueRed

U STYLE P/NRJS 20216RJS 20216-3RJS 20216-4

BlackBlueRed

360° STYLE P/NRJS 20216-1RJS 20216-1-3RJS 20216-1-4

Childs Neck Collar BRK 95-9550P/NDESCRIPTION

HELMET FANS

BRP Tornado Helmet Fan- comes with wiring & mounting hardwareFoam Outer Pre-Filter for BRP TornadoReplacement Filter For Tornado Helmet Fan (BRP 9153)Replacement 2 Pin Weathertight Connector for BRP 9153 / 930044” Hose - 1 1/4” Inlet & Outlet (fits PAR PUMP, BRP 9153, & BRP 9300)Parker Helmet Pump - Comes with Filter (no hose)Replacement Filter For Parker Helmet Pump (PAR PUMP)BRP Storm Helmet Fan - comes with wiring & mounting hardwareReplacement Filter for Storm Helmet Fan (BRP 9300)

BRP 9153K-N 25-1480ALL 36202BRP 9157PAR HOSEPAR PUMPPAR FILTERBRP 9300BRP 9301

P/NDESCRIPTION

PAR PUMP BRP 9153 BRP 9300


PIT & SAFETY EQUIPMENTHELMETS

Simpson and Impact Helmets Available - Call For Pricing and Availability!

SHIELDS

Clear ShieldSmoke ShieldAmber ShieldPivot Kit

DESCRIPTION P/NSIM 88300SIM 88301SIM 88304SIM 99022

Measure directly above the brow line for the best helmet �t. Simpson recommends inspection of your helmet after any impact collision.

65

20 21 22INCHES

51 52 53 54 55 56 57CENTIMETERS

23 24 25

58 59 60 61 62 63 64

HAT SIZE

HELMET SIZE

65/8 – 63/4 67/8 – 7 71/8 – 71/4 73/8 – 71/2 75/8 – 73/4 77/8 – 8

XS SM MD LG XL XXL

—

—XS

65/58// – 8 63/3

4//

52 53

21

MD

71/8/ – 8 71/4/

56 57

22

XL

75/58/ – 8 73/3

4/

60 61

24

Simpson Voyager



Simpson Old Voyager

Clear ShieldSmoke ShieldPivot Kit

DESCRIPTION P/NSIM 89400ASIM 89401SIM 99022

Simpson Bandit / Super Bandit



Simpson RX


DESCRIPTION P/NSIM 88600ASIM 88601SIM 88604SIM 99022

Simpson Super Shark

Clear ShieldPivot Kit

DESCRIPTION P/NIMP 12199901IMP 10000000

Impact Super Charger

Clear ShieldPivot Kit

DESCRIPTION P/NIMP 19300901IMP 10000000

Impact Air Draft

Universal Helmet SkirtUniversal Tear Off Posts (comes with 2 buttons & 2 posts)Universal Tear Off Posts (Card of 12 Packages)

RJS 90904ULT 1912BULT 1091B

P/NDESCRIPTION

HELMET ACCESSORIES & HOOKS

ULT 1091B

RJS 90904

Helmet hook for 1 1/4” tubingHelmet hook for 1 1/2” tubingHelmet hook for 1 5/8” tubingHelmet hook for 1 3/4” tubing

BRP 9256BRP 9257BRP 9258BRP 9259

P/NDESCRIPTIONHelmet Hooks

BRP 9258


PIT & SAFETY EQUIPMENTULTRA SHIELD TEAR OFFS

11 1/2” Button Centers - StraightDESCRIPTION P/N

ULT 1201C Fits: Simpson Voyager, HJC,Side Pro Elite

X Stack - ClearDESCRIPTION P/N

RO 10201C

Sold in box -10 Bags of 20 tear o�s per box.RACING OPTICS TEAR OFFS

Fits: Bell,G-Force, Pyrotect

Fits: Simpson SX, Matrix, Jr SharkHJC Auto

Fits: Simpson RX, Super Bandit, Raider,Diamondback

Fits: Simpson Bandit

Fits: Simpson Shark, Super Shark,and Speedway Shark

Fits: Impact Vapor, Charger, Air Vapor,Super Charger, and Draft

Fits: Impact Champ, Nitro

12 3/8” Button Centers - BananaDESCRIPTION P/N

ULT 1202C X Stack - ClearDESCRIPTION P/N

RO 10205C

11 1/2” Button Centers - CurvedDESCRIPTION P/N


RO 10203C

11 1/2” Button CentersDESCRIPTION P/N


RO 10204C

12” Button CentersDESCRIPTION P/N

ULT 1208C

12 3/4” Button Centers DESCRIPTION P/N


RO 10209C


ULT 1230C


ULT 1215C


RO 10230C


RO 10231C

3 Stacks of 10 Tear o�s per Package.

ROLL BAR PADDING

BlackRedGray

DESCRIPTION P/NBRP BLACKBRP REDBRP GRAY

Standard - 1 1/2” TubingBlack

DESCRIPTION P/NKIR 99031

Hi - Density

BlackRedBlue

DESCRIPTION P/NKIR 99021KIR 99022KIR 99023

Hi - Density SFI 45.1 - 1”

* All Roll Bar Padding Comes In 3 Foot Lengths*

TIE DOWNS

Tie Down (sold in packs of 2) RJS 30307P/NDESCRIPTION

DISCONTINUED

DISCONTINUED

DISCONTINUED


SEATS & ACCESSORIESKIRKEY SEATS

Kirkey 79 Series 10° LaybackFull Containment Seats

14”14 1/2”

15”15 1/2”

16” 17”

KIR 69100KIR 69200KIR 69300KIR 69400KIR 69500KIR 69700

SEAT COVER P/NSIZE SEAT P/NKIR 69111KIR 69211KIR 69311KIR 69411KIR 69511KIR 69711

Kirkey 69 Series 10°Intermediate Containment Seats

14” Regular15” Regular16” Regular17” Regular

KIR 58100LWKIR 58300LWKIR 58500LWKIR 58700LW

DESCRIPTION SEAT P/N LW COVER P/NKIR 58111LWKIR 58311LWKIR 58511LWKIR 58511LW

Kirkey 58 Series 20° Lightweight Seats

14” Regular15” Regular16” Regular17” Regular18” Regular

KIR 56100LWKIR 56300LWKIR 56500LWKIR 56700LWKIR 56900LW

STD COVER P/NDESCRIPTION SEAT P/NKIR 56111KIR 56311KIR 56511KIR 56711KIR 56911

LW COVER P/NKIR 58111LWKIR 58311LWKIR 58511LWKIR 58511LW

Kirkey 56 Series 10°Lightweight Deluxe Seats

56100LW Shown With Optional LW Seat Cover - Sold Separately

*NOTE - Available With Black Cover Only - Sold Separately *NOTE - Available With Black Cover Only - Sold Separately

Kirkey 41 Series 18° Layback Drag Seats

15”16”17”18”

KIR 41300KIR 41500KIR 41700KIR 41900

COVER P/NSIZE SEAT P/NKIR 41311KIR 41511KIR 41711KIR 41911

58100LW Shown With Optional LW Seat Cover -Sold Separately

14”14 1/2”

15”15 1/2”

16” 17”

KIR 79140KIR 79145KIR 79150KIR 79155KIR 79160KIR 79170

SEAT COVER P/NSIZE SEAT P/NKIR 7914011KIR 7914511KIR 7915011KIR 7915511KIR 7916011KIR 7917011

69 Series Rear Seat Clamps(sold each, requires 2 for installation) MFG KIR011

P/NDESCRIPTION


SEATS & ACCESSORIESKIRKEY SEATS

Kirkey 36 Series 20° LaybackIntermediate Seats

14”15”16”17”18”

KIR 36100KIR 36300KIR 36500KIR 36700KIR 36900

SEAT COVER P/NSIZE SEAT P/NKIR 36111KIR 36311KIR 36511KIR 36711KIR 36911

Kirkey 94/98 Series 20° LaybackEconomy Seats

15 1/2”17 1/2”

KIR 09400KIR 09800

SEAT COVER P/NSIZE SEAT P/NKIR 09401KIR 09801

Only Black Seat Cover Available -Sold Separately Only Black Seat Cover Available -Sold Separately

Head SupportCloth Cover Black

KIR 00100KIR 00111

LEFT P/NDESCRIPTION RIGHT P/NKIR 00200KIR 00211

SEAT ACCESSORIES

Head Supports

Shoulder SupportCloth Cover Black

KIR 00500KIR 00511


Shoulder Supports

Leg SupportCloth Cover Black

KIR 00300KIR 00311


Leg SupportsLumbar SupportDESCRIPTION P/N

KIR 99020

Lumbar Support

DIRTCAR SEAT SPACERS

DIRTCar Seat Plate (bolts to bottom of aluminum seat for protection)1” Bottom Seat Spacer (pre-drilled and powder coated black)1 1/2” Bottom Seat Spacer (pre-drilled and powder coated black)2” Bottom Seat Spacer (pre-drilled and powder coated black)

BRB 49MFG CHA131MFG CHA132MFG CHA132-1

P/NDESCRIPTION

BRB 49


FASTENERS & ACCESSORIESPANEL FASTENERS

5/16” Steel7/16” Short Steel7/16” Short Aluminum7/16” Medium Steel7/16” Medium Aluminum7/16” Long Steel7/16” Long Aluminum7/16” Winged Medium Steel7/16” Steel Short With Large Head7/16“ Steel Medium With Large Head7/16” Steel Long With Large Head

GRIP LENGTHDESCRIPTION P/NBRB 99BRB 100BRB 100ABRB 101BRB 103BRB 102BRB 102ABRB 104BRB BIG100BRB BIG101BRB BIG102

.400”

.450”

.450”

.500”

.500”

.600”

.600”

.500”

.450”

.500“

.600”

PANEL FASTENER SPRINGS

1 3/8” Center to Center Spring - use with 7/16” buttons1” Center to Center Spring - use with 5/16” buttons - .275“ Grip1” Center to Center Spring - use with 5/16” buttons - .323” Grip

BRB 105BRB 114BRB 115

P/NDESCRIPTION

SELF EJECTING BUTTONS

5/16” Self Ejecting Button5/16” Winged Self Ejecting Button7/16” Self Ejecting ButtonLudwig Clamp (sold in packs of 4)

BRB 111BRP 111-1BRB 113ALL 18232

P/NDESCRIPTION

PANEL FASTENER PLATES

1/8” Small Head3/16” Small Head3/16” Small Head3/16” Small Head3/16“ Small Head3/16” Small Head3/16” Small Head3/16“ Small Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Large Head3/16” Backup Washer3/16” Backup Washer

COLORDESCRIPTION P/NBRB 1825BRB 825BRB 925BRB 1025BRB 525-URRBRB 1925BRB 630BRB 725BRB 1125BRB 1225BRB 1425BRB 1525BRB 1625BRB 1725BRB 900ALL 18202

PlainRed

YellowWhiteBlueBlackPlainPlainPlainWhiteBlueBlackYellowRedSteel

Aluminum

QTY250250250250250250300250250250250250250250250250

ALUMINUM BODY RIVETS

Steel Weld Plate for 5/16” Buttons - sold eachStandard Steel Weld Plate for 7/16” Buttons - sold eachLightweight Steel Weld Plate for 7/16” Buttons - sold each7/16” Washers (sold in packs of 20)

BRB 98BRB 107BRB 108LBRB 109

P/NDESCRIPTION

GUSSETS AND CAPS

Did You Know...BRP cars require: 186 short buttons,

28 medium buttons, and 25 longbuttons.

Buttons are Sold Individually or in Quantities 10, 25, 50 and 100.

Springs are Sold Individually or in Quantities 10, 25, 50 and 100.

Buttons are Sold Individually or in Quantities 10, 25, 50 and 100.

Plates are Sold Individually or in Quantities 10, 25, 50 and 100.

Steel Gusset (package of 10)Steel Gusset (package of 25)Steel Gusset (package of 100)Aluminum Cap for 1 1/2” X .120” Wall Tubing (sold each)Aluminum Cap for 1 1/2” X .095” Wall Tubing (sold each)Plastic Cap for 1” X .095” Wall Tubing (sold each)Plastic Cap for 1 1/4” X .095” Wall Tubing (sold each)Plastic Cap for 1 1/2” X .140” Wall Tubing (sold each)

BRP 1549BRP 1550ALL 22194-100BRP 700BRP 702BRP CAPC32U1MFG CHA177CAPMFG CHA100BOC

P/NDESCRIPTION

BRB 99 BRB 100 BRB BIG100

BRB 105

BRB 113BRB 111-1 ALL 18232

BRB 107 BRB 108

BRB 1549 BRB 700

BRB 1725

SEE PAGE 154 FOR DZUS BUTTON DRIVERS


FASTENERS & ACCESSORIESKIRKEY SEATSALUMINUM SHEETS

WhiteRed

BlackYellow

COLOR P/NBRB 920140BRB 920111BRB 920118BRB 920504

4’ X 10’ Sheet - .040” Thick

4’ X 8’ Sheet - .032” Thick

WhiteCOLOR P/N

BRB 920091


WhiteCOLOR P/N

BRB 920139

WhiteRed

BlackYellow

Chevron BlueX-Red

COLOR P/NBRB 920189MBRB 920292BRB 920294BRB 920416BRB 920426BRB 920309


Mill FinishTread Brite

COLOR P/NBRB 920240BRB 920749

WhiteRed

BlackMatte Silver

COLOR P/NBRB 920190BRB 920269BRB 920295BRB 920212

4’ X 10’ Sheet - .050” Thick


Tread BriteCOLOR P/N

BRB 920748

4’ X 10’ Sheet - .063” Thick

KIRKEY SEATS200 MPH RACING TAPE

KIRKEY SEATSROLL & SHEET PLASTICKIRKEY SEATSHOOD PIN KITS

BlackWhiteRed

YellowBlue

COLOR P/NALL 22402ALL 22407ALL 22411ALL 22426ALL 22416

Steel Pin with 3/16” Flip Clip (kit of 2)Aluminum Pin with Hair Pin Clip (kit of 2)Aluminum Pin with 3/16” Flip Clip (kit of 2)Plain 1/2” Aluminum Pin Only (sold each)Chrome 3/16” Flip Clip Only (sold each)Chrome Hair Pin Clip (sold each)Scuff Plate Only (sold each)Hood Pin Jam Nut (sold each - 2 required)Steel Pin With Hairpin Clip (sold each)

DESCRIPTION P/NALL 18512BRP 5128BRP 5129BRP 5130BRP 5138BRP 5140BRP 5141BRP 784BRP 5137

KIRKEY SEATSBALLAST CLAMPS / BALLAST WEIGHT

1” 1 1/8”1 1/4”1 1/2”1 5/8“1 3/4”

DIAMETER P/N REDBRP 5113BRP 5114BRP 5115BRP 5117BRP 5118BRP 5119

BRP 5113BKBRP 5114BKBRP 5115BKBRP 5117BKBRP 5118BKBRP 5119BK

P/N BLACKRound Tubing

1 1/2” X 1 1/2” - Plain2” X 2” - Red2” X 3” - Red

COLOR P/NBRP 5121BRP 5122BRP 5123

Square Tubing

Ballast Weight Bar (comes with red clamps)Bolts Between Rear Shock TowersBallast Weight Bar (comes with black clamps)Bolts Between Rear Shock TowersLead Ballast Weight (40 pounds)

DESCRIPTION P/N

BRP 5112

BRP 5112BKBRP 5124-40

3"3/4"

21"

RedBlue

YellowBlackSilverWhite

OrangePurple

COLOR P/NISC RT3001ISC RT3002ISC RT3003ISC RT3004ISC RT3005ISC RT3006ISC RT3008ISC RT3010

Roll Plastic - Available in 10’,15’,25’, & 50’ Lengths

Roll Plastic - 24” Wide X .070” Thick

WhiteBlackRed

Chevron BlueYellow

COLOR P/NALL 22460ALL 22461ALL 22462ALL 22464ALL 22466

Sheet Plastic - 4’ X 8’ X .100” Thick

NOTE- Roll plastic has a thicknessof .070”, while sheet plastic has

a thickness of .100”

WhiteBlack

COLOR P/NBRB 920208BRB 920296

4’ X 12’ Sheet - .050” Thick

BlackRedBlue

Yellow

COLOR P/NALL 14125ALL 14127ALL 14129ALL 14137

KIRKEY SEATSTIE WRAPS

QTY - 10014 1/4” Long


CHASSIS & COMPONENTSBICKNELL CHASSIS KITS - LARGE BEARING

Option 1 - Chassiswith all Mounts

Option 2- Chassiswith white body installed

Option 3 - Kit CarUnassembled

Option 4 - CompleteRolling Chassis

with parts listed below

QTY PART# Description 1 BRP 1210 Front Panhard Rod 1 BRC 310-1000 Brake balance bar2 BRP 19 Front caliper brackets - 4588 spindles 4 BRP 1250 Front Radius Rods 1 BRE 1051R 5/16 R.H. Male Gas Rod1 BRP 42L Left Front Brake Line Guard 1 BRP 1399-900 900# SPRING ROD 1 BRE 1051L 5/16 L.H.1 BRP 42R Right Front Brake Line Guard 2 BRP 1505 Front Axle Brackets 1 BRE 1061L 3/8 L.H. Brake Rod4 BRP 51 Rotor Bolt Kit 2 BRP 1533 Torsion Bearings 2 BRE 5101R 5/8-5/8 R.H. Male Rod end2 BRP 67 12" front waved brake rotors 2 BRP 1535 Torsion Spacers 3 BRE 5101L 5/8-5/8 L.H. Male Rod End2 BRP 71 12.18`` O.D. X .810 Rear vented rotors 1 BRP 1598-24 24 Gallon Fuel Cell Box 1 BRE 2101L 5/8-5/8 L.H. Male Prec. For Tie Rod End1 BRP 162 Steering Wheel Quick Release 1 BRP 1623 Front Panhard Axle Mount 1 BRE 2101R 5/8-5/8 R.H. Male Prec. For Tie Rod end1 BRP 181-1A Slider Collar for T/A 1 BRP 1624 Rear End Panhard Mount 6 BRE 5081R 5/8 -1/2 R.H.Male1 BRP 209 Left Ford Steering Arm 1 BRP 1625 Panhard Support Bracket 6 BRE 5081L 5/8 -1/2 L.H. Male1 BRP 211 Right Ford Steering Arm 1 BRP 1645 Driveshaft Cover 1 POW 9529 Inboard Starter2 BRP 215 Centre steering side mounts 1 BRP 1646 Front Driveshaft Hoop 1 BER 300 Inboard bellhousing1 BRP 220 Alum.Pitman Arm 1 BRP 1647 Rear Driveshaft Hoop 2 BER CTD-001 Rear drive hubs2 BRP 263 Alum.Torsion Bar Stops 1 BRP 2010 Package of Black E.Z. Ties 2 BER CTD-NYM-H01 Front hubs2 BRP 264B Torsion Bushings 20 BRP 2051 5/8 Course Wheel Nuts 1 GNB DT700 Cyclone Battery1 BRP 274-6 Center Steering Mount for Driver Back 1 BRP 3205 Solid Rear Axle 1 EIB 1200.250.0150 12" X 150 Right front coil spring2 BRP 280 Front Shock Sliders 1 BRP 3260 Solid Rear Axle 1 EIB 1200.250.0250 12" x 250 Left front coil spring1 BRP 292 Rear motor Plate 1 BRP 4044 16-16 20 inch Driveshaft 1 F-S RB224 24 Gallon Fuel Cell Bladder1 BRP 304 Left side engine mount 2 BRP 4289 Rear shock sliders 1 KBP 301 Fuel Line Kit1 BRP 325 or 327 Right front engine plate 1 BRP 4255 Left rear large bearing birdcage 2 KBP 40C Fuel Filter Clamps2 BRP 345 Rear axle drive flanges for LB 1 BRP 4257 Right rear large bearing birdcage 3 KBP C108 Vent Hose for Fuel cell Filter1 BRP 398 Front panhard slider 1 BRP 4400 L.R. Torsion Arm 1 XRP 249008 Fuel Cell Vent Fitting1 BRP 407 Brake Line Kit 1 BRP 4402 R.R. Torsion Arm 1 K-N 62-1010 Vent Filter for Fuel cell1 BRP 408-3 Chassis Bolt Kit 2 BRP 4403 Torsion Arm Safety Bolts 1 GRF 185195P Aluminum Down flow rad 1 BRP 410R-2 Gas Pedal rod 1 BRP 4551 Panhard Frame Mount kit 1 KIR 56300LW KIRKEY Deluxe Alum Seat 1 BRP 411 Brake Pedal 1 BRP 4552 Panhard Support Bracket 1 KIR 56311 Black TWEED Padding1 BRP 4340-12 Brake Pedal Rod 2 BRP 4588 Front Aluminum Billet LW spindles 1 KIR 00021 Steering Wheel Padding1 BRP 414 ALUMINUM Gas Pedal 1 BRP 5032-8 Fuel Filter 2 KIR 99021 SFI High density roll bar padding1 BRP 418 Slider plate for Torque arm P.U. 1 GAU 5104 Quantum O.P./W.T. Dash Panel 1 RJS 02-19-06 BLACK Belt / Harness kit1 BRP 419 Front T/A Pick Up Slider Rod 1 BRP 5107 Battery Ground Cable 2 BIL B46-0210C Front Shock 162/55 Valving2 BRP 421 Slider Rods for T/A 1 BRP 5107-1 Battery Power Cable 2 BIL B46-0207B Rear Shock 208/72 Valving1 BRP 424 Rubber Torque Arm Mount 1 BRP 5107-2 Battery Power Cable 1 PFC 7757.81.12.44 Front 81 series brake pads2 BRP 426 or 432 Torque arms 4 BRP 6223 Snap rings for Large bearing hubs 1 PFC 7754.01.16.44 Rear 01 series brake pads1 BRP 442 T/A Rear End Thru Bolts for 1624 style 8 BRP 6224 Inner and Outer hub bearings 1 PRFBOX-190 Steering Box2 BRP 509 Driveshaft Slip Yoke 4 BRP 6225 Front and rear hub seals 1 REB 270-8645 15" Dished Steering Wheel2 BRP 512 U-Joints 2 BRP 6226 Front hub dust caps 1 REB 160-1500 Battery Power shut off switch1 BRP 563B Power Steering Reservoir 4 BRP 6230 Large bearing Spindle nuts 1 SHR 29SD925 Right rear torsion bar1 BRP 577 46"Power Steering Pressure Hose 1 BRP 7119 Black Tall Window Screen 1 SHR 29SD950 Left rear torsion bar1 BRP 582 Power Steering Return Hose Kit 1 BRP 1385-17 1/2 Radius Rod For Spring Rod 1 WIL 260-10374B 7/8" Master Cylinder----SHORTY2 BRP 614-7 Bilstein Coil Over kit 1 BRP RR271/2 Left Rear Radius Rod 1 WIL 260-10375B 1" Master Cylinder-----SHORTY1 BRP 778 5/16 R.H. Jam Nut (gas pedal rod) 1 BRP RR48 1/2 Tie Rod for 52" axle 2 WIL 290-0632 575 Degree Brake Fluid1 BRP 779 5/16 L.H. Jam Nut (gas pedal rod) 1 BRP RR64B Drag Link Bent 1 WIN 61733 Transmission fluid1 BRP 781 3/8 L.H. Jam Nut (brake Rod) 1 BRP EC52BOC Front Axle 1 WIN 60150M Winters Transmission 9 BRP 786 5/8 R.H. Jam Nut 1 BRP Black Roll Bar Padding 4 WIN 5855 U-Bolts

10 BRP 787 5/8 L.H Jam Nut 2 BRC 170-1526 Front Billet 1000 series BRP caliper 1 WIN K5280S-LB Rear end with Large Bearing tubes1 BRP 910 Rear end vent kit 2 BRC 170-4090 Rear Billet 2800 series BRP caliper1 BRP 1150 Rear Panhard Rod

Option 3 Parts List - PARTS AVAILABLE IN RED & BLACK

Upgrade Options:CHASSIS 29 Radius rod tin

Upgrade Powder paint Chassis & Bumpers / Included with (Option 4) 30 Powder painted front spoiler GAUGES1 Standard colours of paint = White, Black, Red, Blue, Gray, Orange 31 Sail panel upgrade for side panels only---No roof spoiler 68 Autometer Electric Tach with recall2 Upgrade Powder paint to Yellow, Clear, or Met Silver 32 Roof Spoiler kit for Outalw tracks 69 Digital Tel Tach 3.125" X 3.125" X 1" thick3 Powder Candy colour 2 coat / Candy Blue, Purple, Silver, Red, Flour orange 33 Tall door (3" taller than stock) 70 Glow in the dark Dash panel4 Tall Roll Cage (2" taller than stock) FUEL CELL HELMET FAN5 Driver back 3" from stock 76 Helmet Fan & Hose6 Removable front shock towers

42 KBP132 32 Gallon Fuel Cell with #10 Pick upCOOLING ACCESSORIES

7 Rubber floor chassis upgrade REAR AXLES 77 PATS Down flow or Cross flow rad in place of Griffin8 Slider parts & hardware for rubber floor (417, 2-9115, 4-181-1A) 46 Gundrilled Rear Axles 78 BRB 1 or 2 Fiberglass Fan Shroud

BUMPERS SUSPENSION 79 Fully Contained rad mount / Must have radiator PART #15 Complete bumper kit 49 BRP 4549 Adjustable Rear Panhard assembly DRIVELINE16 4130 light weight Chrome moly bumpers 50 9018 easy adjust torque arm kit 83 Bert open transmission and bellhousing in place of Winters17 Chrome bumper package 51 9108 offset floor slider kit (aslo incudes BRP 9104) STEERING

BODY MOUNTS 52 9120 rubber rear pan hard bar 86 Profile PRO aluminum steering gear21 Complete body mount kit 53 Bicknell lifetime warranty hubs (upgrade in a pair) 87 BRP 9046 knee guard22 4130 light weight body mount upgrade 54 Quad Lock Rear End Tubes & Birdcages BRAKE UPGRADES

BODY SEAT 91 Labour to install Brake line kit (standard BRC 190-0407 kit)26 Complete Coloured Body 61 Head Rest & Pad 92 Labour for installation with Right front shut off27 Coloured Exterior Body Panels 62 FULLY Contained seat upgrade 93 Wilwood Directional rear DRILLED light weight rotors28 Coloured fiberglass / scoop, cowl, wheel tub and roof ENGINE ACCESSORIES 94 PFC Directional rear rotors (note only 11.75" diameter)

66 Power Steering Pump & V or Serpentine Pulley


CHASSIS & COMPONENTSKIRKEY SEATSBICKNELL CHASSIS KITS - WIDE 5 8 BOLT

Option 1 - Chassiswith all Mounts

Option 2- Chassiswith white body installed

Option 3 - Kit CarUnassembled

Option 4 - CompleteRolling Chassis

with parts listed below

QTY PART# Description 1 BRP 778 5/16 R.H. Jam Nut (gas pedal rod) 1 BRP EC52BOC Front Axle 2 BRP 18-2375 Front Caliper Brkts 1 BRP 779 5/16 L.H. Jam Nut (gas pedal rod) 1 BRP Black Roll Bar Padding 1 BRP 42L Left Front Brake Line Guard 1 BRP 781 3/8 L.H. Jam Nut (brake Rod) 2 BRC 170-1526 Front Billet 1000 series BRP caliper1 BRP 42R Right Front Brake Line Guard 9 BRP 786 5/8 R.H. Jam Nut 1 BRC 170-4090 Rear Billet 2800 series BRP caliper2 BRP 51 Rear Rotor Bolt Kit for 8 bolt rear 10 BRP 787 5/8 L.H Jam Nut 1 BRC 310-1000 Brake balance bar assembly2 BRP 65W 3/8" Waved LW front Brake rotors 2 BRP 828 Inner Hub Bearings 1 BRE 1051R 5/16 R.H. Male Gas Rod2 BRP 71 .810 Rear vented rotors 2 BRP 829 Outer Hub Bearings 1 BRE 1051L 5/16 L.H.2 BRP 114 Rear Hub Seals 2 BRP 835 Hub Seals 1 BRE 1061L 3/8 L.H. Brake Rod2 BRP 117 Inner Hub Bearings 1 BRP 910 Rear end vent kit 2 BRE 5101R 5/8-5/8 R.H. Male Rod end2 BRP 118 Outer Hub Bearings 1 BRP 1150 Rear Panhard Rod 3 BRE 5101L 5/8-5/8 L.H. Male Rod End1 BRP 162 Steering Wheel Quick Release 1 BRP 1210 Front Panhard Bar 1 BRE 2101L 5/8-5/8 L.H. Male Prec. For Tie Rod End1 BRP 181-1A Slider Collar for T/A 4 BRP 1250 Front Radius Rods 1 BRE 2101R 5/8-5/8 R.H. Male Prec. For Tie Rod end1 BRP 209 Left Ford Steering Arm 1 BRP 1399-900 900# SPRING ROD 6 BRE 5081R 5/8 -1/2 R.H.Male1 BRP 211 Right Ford Steering Arm 2 BRP 1505 Front Axle Brackets 6 BRE 5081L 5/8 -1/2 L.H. Male2 BRP 215 Centre steering side mounts 2 BRP 1533 Torsion Bearings 1 POW 9529 Inboard Starter1 BRP 220 Alum.Pitman Arm 2 BRP 1535 Torsion Spacers 1 BER 300 Inboard bellhousing2 BRP 263 Alum.Torsion Bar Stops 1 BRP 1598-24 24 Gallon Fuel Cell Box 1 GNB DT700 Cyclone Battery2 BRP 264B Torsion Bushings 1 BRP 1623 Front Panhard Axle Mount 1 EIB 1200.250.0150 12" X 150 Right front coil spring1 BRP 274 Center Mount 1 BRP 1624 Rear End Panhard Mount 1 EIB 1200.250.0250 12" x 250 Left front coil spring2 BRP 280 Front Shock Sliders 1 BRP 1625 Panhard Support Bracket 1 F-S RB222B-C 22 Gallon Fuel Cell Blader1 BRP 292 Rear motor Plate 1 BRP 1645 Driveshaft Cover 1 KBP 301 Fuel Line Kit1 BRP 304 Left side engine mount 1 BRP 1646 Front Driveshaft Hoop 2 KBP 40C Fuel Filter Clamps1 BRP 325 or 327 Right front engine plate 1 BRP 1647 Rear Driveshaft Hoop 3 KBP C108 Vent Hose for Fuel cell Filter2 BRP 320 Rear Spindle Nuts 1 BRP 2010 Package of Black E.Z. Ties 1 XRP 249008 Fuel Cell Vent Fitting2 BRP 339 Bolt kit for 343 D.F. 20 BRP 2051 5/8 Course Wheel Nuts 1 GRF 185195P Aluminum Down flow rad 2 BRP 343 Rear Axle Drive Flanges 1 BRP 3020 Solid Rear Axle 1 KIR 56300LW KIRKEY Deluxe Alum Seat 1 BRP 398 Front panhard slider 1 BRP 3076 Solid Rear Axle 1 KIR 56311 Black TWEED Padding1 BRP 407 Brake Line Kit 1 BRP 4044 16-16 20 inch Driveshaft 1 KIR 00021 Steering Wheel Padding1 BRP 408-3 Chassis Bolt Kit 2 BRP 4289 Rear shock sliders 2 KIR 99021 SFI High density roll bar padding1 BRP 410R-2 Gas Pedal rod 1 BRP4292 L.R. Roller B/C Assembly 1 RJS 02-19-06 BLACK Belt / Harness kit1 BRP 411 Brake Pedal 1 BRP 4293 R.R. Roller B/C Assembly 2 BIL B46-0210C Front Shock 162/55 Valving1 BRP 4340-12 Brake Pedal Rod 1 BRP 4400 L.R. Torsion Arm 2 BIL B46-0207B Rear Shock 208/72 Valving1 BRP 414 ALUMINUM Gas Pedal 1 BRP 4402 R.R. Torsion Arm 1 PFC 7757.81.12.44 Front 81 series brake pads1 BRP 418 Slider plate for Torque arm P.U. 2 BRP 4403 Torsion Arm Safety Bolts 1 PFC 7754.01.16.44 Rear 01 series brake pads1 BRP 419 Front T/A Pick Up Slider Rod 1 BRP 4551 Panhard Frame Mount kit 1 PRFBOX-190 Steering Box2 BRP 421 Slider Rods for T/A 1 BRP 4552 Panhard Support Bracket 1 REB 270-8645 15" Dished Steering Wheel1 BRP 424 Rubber Torque Arm Mount 2 BRP 4570 Aluminum billet front hubs 1 REB 160-1500 Battery Power shut off switch2 BRP 426 or 432 Torque arms 2 BRP 9200 Front Aluminum Billet LW Spindles 1 SHR 29SD925 Right rear torsion bar1 BRP 442 T/A Rear End Thru Bolts for 1624 style 1 BRP 5032-8 Fuel Filter 1 SHR 29SD950 Left rear torsion bar2 BRP 472C Rear Spindle Bolt Kits 1 GAU 5104 Quantum O.P./W.T. Dash Panel 2 WIL 270-1956C Aluminum Wide 5 Rear Hubs2 BRP 486 Rear 8 Bolt Spindles 1 BRP 5107 Battery Ground Cable 1 WIL 260-10374B 7/8" Master Cylinder-----SHORTY2 BRP 509 Driveshaft Slip Yoke 1 BRP 5107-1 Battery Power Cable 1 WIL 260-10375B 1" Master Cylinder-------SHORTY2 BRP 512 U-Joints 1 BRP 5107-2 Battery Power Cable 2 WIL 290-0632 575 Degree Brake Fluid1 BRP 563B Power Steering Reservoir 1 BRP 7119 Black Powder Coated Tall Window Screen 1 WIN K5280S-8B 4:86 rear with aluminum 8 bolt tubes1 BRP 577 46"Power Steering Pressure Hose 1 BRP 1385-17 1/2 Radius Rod For Spring Rod 1 WIN 60150 Winters transmission1 BRP 582 Power Steering Return Hose Kit 1 BRP RR 27 Left Rear Radius Rod 1 WIN 61733 Transmission fluid2 BRP 614-7 Bilstein Coil Over kit 1 BRP RR 48 1/2 Tie Rod for 52" axle 4 WIN 5855 U-Bolts

1 BRP RR64B Drag Link Bent

Option 3 Parts List - PARTS AVAILABLE IN RED & BLACK

Upgrade Options:CHASSIS 29 Radius rod tin

Upgrade Powder paint Chassis & Bumpers / Included with (Option 4) 30 Powder painted front spoiler GAUGES1 Standard colours of paint = White, Black, Red, Blue, Gray, Orange 31 Sail panel upgrade for side panels only---No roof spoiler 68 Autometer Electric Tach with recall2 Upgrade Powder paint to Yellow, Clear, or Met Silver 32 Roof Spoiler kit for Outalw tracks 69 Digital Tel Tach 3.125" X 3.125" X 1" thick3 Powder Candy colour 2 coat / Candy Blue, Purple, Silver, Red, Flour orange 33 Tall door (3" taller than stock) 70 Glow in the dark Dash panel4 Tall Roll Cage (2" taller than stock) FUEL CELL HELMET FAN5 Driver back 3" from stock 76 Helmet Fan & Hose6 Removable front shock towers

42 KBP132 32 Gallon Fuel Cell with #10 Pick upCOOLING ACCESSORIES

7 Rubber floor chassis upgrade REAR AXLES 77 PATS Down flow or Cross flow rad in place of Griffin8 Slider parts & hardware for rubber floor (417, 2-9115, 4-181-1A) 46 Gundrilled Rear Axles 78 BRB 1 or 2 Fiberglass Fan Shroud

BUMPERS SUSPENSION 79 Fully Contained rad mount / Must have radiator PART #15 Complete bumper kit 49 BRP 4549 Adjustable Rear Panhard assembly DRIVELINE16 4130 light weight Chrome moly bumpers 50 9018 easy adjust torque arm kit 83 Bert open transmission and bellhousing in place of Winters17 Chrome bumper package 51 9108 offset floor slider kit (aslo incudes BRP 9104) STEERING

BODY MOUNTS 52 9120 rubber rear pan hard bar 86 Profile PRO aluminum steering gear21 Complete body mount kit 53 Bicknell lifetime warranty hubs (upgrade in a pair) 87 BRP 9046 knee guard22 4130 light weight body mount upgrade 54 Quad Lock Rear End Tubes & Birdcages BRAKE UPGRADES

BODY SEAT 91 Labour to install Brake line kit (standard BRC 190-0407 kit)26 Complete Coloured Body 61 Head Rest & Pad 92 Labour for installation with Right front shut off27 Coloured Exterior Body Panels 62 FULLY Contained seat upgrade 93 Wilwood Directional rear DRILLED light weight rotors28 Coloured fiberglass / scoop, cowl, wheel tub and roof ENGINE ACCESSORIES 94 PFC Directional rear rotors (note only 11.75" diameter)

66 Power Steering Pump & V or Serpentine Pulley


166

CHASSIS & COMPONENTSBICKNELL BODIES

Note- Serial number is required when orderingpanels / �berglass to ensure proper �t.

BICKNELL RACING PRODUCTS WILL NOT BE RESPONSIBLE FOR MIS-ORDERED BODY PANELS

ADD THE FOLLOWING COLOR OPTIONWHEN ORDERING PANELS / FIBERGLASS

01 = WHITE02 = RED

03 = BLACK04 = BLUE

05 = YELLOW06 = X-RED

07 = MATTE SILVER

ie. BRB 2921L-03 (BLACK)

- ALL BODY PANELS ARE MANUFACTURED FROM .050” ALUMINUM- PANELS ARE AVAILABLE IN THE FOLLOWING COLORS :

WHITE RED BLACK BLUE YELLOW XRED- WINGS AND DECKS ARE ALSO AVAILABLE IN MATTE SILVER

2332 2928R

2950 or2950-1.5

2928L

2909L

2909R

2909V

2909

2915LO

2915L

2915LI

2312L

2325

2314L

2307L

2346

40

2330

2338 2327

2934L

2934R

2933

17L2314R

2915R2915RO

2915RI

2311

2310R

2935

2351

STD FLOOR - 2337LRUBBER - 2937L

2936L

2936R

2312R

2324

2305

2342

2342

2316

2303

2801

2310L

2307R

15-18BL

2920R

2943R

2944R2921R

2947

2948

2943L

2944L

2920L

2921L

2307BA

14-06R

14-06L

14-04F

14-04T14-04M

14-04B

BRP 7130A

BRP 7130C

BRP 7130B

14-31L-2

14-31LT

14-31RT

15-1915-18TL-2

15-18BR

15-1915-18TL-2

BB - 2741BSB - 2341

Long Hood Scoop

BB - 12-41BSB - 12-41

Short Hood Scoop

2015 BODY DIAGRAMStandard options on this diagram:

- 2” tall cage - standard floor- 3” driver back - 2” deep rear deck

2308L

2308L

Optional Pre-WiredDash - GAU 5104-01

Blank With Holes - 2326

14-31R-2

USE BRB LINE CODE UNLESS OTHERWISE NOTED

STD FLOOR - 2337LRUBBER - 2937L

2015 Body Diagram REV 001

ADD THE FOLLOWING COLOR OPTIONWHEN ORDERING PANELS / FIBERGLASS

01 = WHITE02 = RED

03 = BLACK04 = BLUE

05 = YELLOW06 = X-RED

07 = MATTE SILVER

ie. BRB 2921L-03

Optional / older panels are also available.Please consult pgs 166-169 of 2015 catalog.


CHASSIS & COMPONENTS

Left / Right Front Edge Door Stiffener (installs on front edge of door) sold eachLeft / Right Rear Quarter Panel Stiffener (installs on rear edge of quarter) sold each

BRB 2952BRB 2953

P/NDESCRIPTION

Left / Right Front Strut - Front Rolled Down Front Wings (21 13/16” Long)Left / Right Front Strut - Front Flat Front Wings (18“ Long)Left / Right Middle Strut - All Wings (18 3/4” Long)Left Door Horizontal Brace (71 3/8“ Long)Right Door Horizontal Brace (70 7/8”Long)Rear Quarter Window Strut - All Wings (25“ Long)Left / Right Front Strut - Front Rolled Down Front Wings with 2” Tall Doors (22 5/8“ Long)Left / Right Front Strut - Front Rolled Down Front Wings with 3” Tall Doors ( 23“ Long)Left / Right Middle Strut - All Wings with 2” Tall Doors (19 3/4“ Long)Left / Right Middle Strut - All Wings with 3” Tall Doors (20 1/16” Long)

BRP 7121BRP 7121SBRP 7122BRP 7123BRP 7124BRP 7125BRP 7121-2BRP 7121-3BRP 7122-2BRP 7122-3

P/NDESCRIPTION

NOTE- All measurements are actual tube lengths, not center to center dimensions and are for identifying partsBRP 2952

BRP 7121

BRP 7122

BRP 7124

BRP 7125

Note- Serial number is requiredwhen ordering noses to

ensure proper nose for chassis

ALUMINUM FRONT SPOILERS

Aluminum Flat Style - 1” Offset

STD Nose - Flat Style - OFFSET 1”1 1/2” Raised Nose - Flat Style - OFFSET 1”

P/NDESCRIPTION

BRB 2012FSPOILERBRB 2012FSPOILER-1.5

END PLATEHEIGHT

15””13 3/4”

Requires BRP 7210, BRP 7210R Nose Mounts

Aluminum Curved Style

STD Nose- Curved Style1 1/2” Raised Nose - Curved Style

P/NDESCRIPTION

BRB 2250BRB 2250-1.5

END PLATEHEIGHT

16”14 1/4”


Aluminum Flat Style

STD Nose- Flat Style1 1/2” Raised Nose - Flat Style3” Raised Nose - Flat Style

P/NDESCRIPTION

BRB 2001FSPOILERBRB 2001FSPOILER-1.5BRB 2001FSPOILER-3

END PLATEHEIGHT

16 3/4”15”

13 3/4”


Aluminum Wedge Style

STD Nose - Wedge Style1 1/2” Raised Nose - Wedge Style

P/NDESCRIPTION

BRP 2950BRP 2950-1.5

END PLATEHEIGHT

14”12 1/2”


Aluminum Ledge Style - 1” Offset

Flat Nose- Ledge Style1 1/2” Raised Nose - Ledge Style

P/NDESCRIPTION

BRB 2013BRB 2013-1.5

END PLATEHEIGHT

14”12 1/2”


Tubular Door Bracing Supports

Door / Quarter Edge Stiffeners

WHEN ORDERING DOOR / QUARTER STIFFENERS-ADD THE FOLLOWING COLOR OPTION

01 - WHITE 02 - RED 03 - BLACK 04 - BLUE05 - YELLOW 06 - XRED 07 - MATTE SILVER

ie. BRB 2952-03

ALL TUBULAR BRACING IS POWDER COATED BLACK

OPTIONAL SAIL PANELS

40

2880R2880L

2882

2881L

2881R

2882L

2882R

167Aluminum Front Door Brace - Flat Style WingsAluminum Front Door Brace - Down Style WingsAluminum Left Side Middle Door BraceAluminum Door To Quarter Panel BraceAluminum Rear Quarter Panel Brace

P/NDESCRIPTION

BRB 2009FDBBRB 2003FDBBRB 2003MDBBRB 2003DTQPBBRB 2003QPB

Aluminum Door & Quarter Panel Braces

DOOR STIFFENERS AND TUBULAR BRACING

BRB 2009FDB

BRB 2003QPB

BRB 2003DTQPB


168


2812R

2809

2812L2313L

2313R

2001 F SPOILER or2001 F SPOILER 1.5

12-18LT

2331LT

2936L

2936R

2331RT

2935

2934R

2933

2934L

12-18RT

2312L

2312R

2309R

2309

2309L

2821L

2821R

2848

2847

2848-1

2847-1

2822R

2822L

2823L

2823R

2720L2721L

2720R 2721R

2322L

2323L

2323R

2322R

OPTIONAL BODY PANELS

USE 2720L & 2720R REAR QUARTERS

OPTIONAL FLAT HOOD / FLAT NOSE OPTIONAL 2003 - 2007 V HOOD

OPTIONAL 2003 - 2007 45° TALL KICK FLAT WINGSOPTIONAL 2008 45° SHORT KICK - ROLL WINGS

FOR USE WITH 2915L & RFLAT STYLE FRONT WINGS

FOR USE WITH 2315L & RFLAT STYLE FRONT WINGS

OPTIONAL 2003 - 2007 TALL CAGE DRIVER BACKOPTIONAL 2000 - CURRENT STD CAGE

12-18L

2331L

2336L

2336R

2331R

2335

2334R

2333

2334L

12-18R

12-19 12-19


CHASSIS & COMPONENTSKIRKEY SEATSOPTIONAL BODY PANELS

2301

2306L

2304

2306R

OPTIONAL 2003 - 2013 STD REAR DECK

2801

2806L

2804

2806R

2" DEEPER

OPTIONAL 2003 - 2013 2” DEEPER REAR DECK

2303

2801

14-06R

14-06L

14-04F

14-04T14-04M

14-04B

BRP 7130A BRP 7130C

BRP 7130B2" DEEPER

2014 - 2015 2” DEEPER REAR DECKOPTIONAL 2014 - 2015 STANDARD REAR DECK

2303

2301

14-06R

14-06L

14-04FS

14-04TS14-04MS

14-04B

BRP 7132A BRP 7132C

BRP 7132B

OPTIONAL 2013 - 2015 LOW V HOOD

13-09L

13-09V

2312L

2312R

13-09R

13-09

OPTIONAL 2014 LATE MODEL PLASTIC

2920R

2921R

2948-LMB

BRP 7097

2944L-LM

2920L

2921L

2944R-LM

2948LM

BRP 7097

Note - Low V hood only fits 23” tall cross flow radiator


CHASSIS & COMPONENTSCHASSIS PART LIST

CHA 107

CHA119

CHA 160

CHA191

CHA121

CHA 84

RIGHT REAR RADIUS ROD POSTComplete Assembly - CHA 139

Front Lower Bar - CHA 53-2Front Upper Bar - CHA 53-3Rear Lower Bar - CHA 53-1Rear Upper Bar - CHA 53-4

Post Only (with slugs) - CHA 56

Fuel cell box 17 1/8” X 25 1/8“- CHA 63-22

9” X 7” Battery box - CHA 63-9X79 3/4” X 5” Battery box- CHA 63-9.75X5

10 1/4” X 7” Battery box - CHA 63-10.25X7

Upper weld on seat plate - CHA 70Lower weld on seat plate- CHA 67

Lower Seat Plate - CHA 67Seat Bar - CHA 223

1.5” back seat bar - CHA 223-1.53” back seat bar - CHA 223-3

CHA 53

CHA 82

CHA 120

CHA 57

CHA 164

CHA 81

CHA 137

JackpostCHA 78

CHA 177

CHA 142RSCHA 142RL

CHA 82

CHA 85

CHA 198-2

CHA 83

CHA 141

CHA 108

CHA 204R

CHA 194CHA 97

Right - CHA 144Left - CHA 143

CHA 8

CHA 110

CHA 108

CHA 125CHA 245L

CHA 204L CHA 142LLCHA142LS

CHA 190CHA 203

CHA 109

CHA 122

CHA 194CHA 96

CHA 70

CHA 93CHA 193

CHA 99H- Complete Solid FloorCHA 185- Complete Rubber Floor

CHA 245R

CHA 198-3

CHA 124

CHA 140CHA 177CAP

CHA 142MTAB (STD FLOOR)CHA 142MTUBE (RUBBER FLOOR)

CHA 159

CHA 161

BRP 1511

BRP 1609

CHA 92

BOXES AND SEAT PLATESSlug - CHA 31

Gusset - BRP 1549



When Ordering chassis parts, please advise sales sta� ofserial number of chassis being repaired. The serial number

is located on the left side 2X4 frame rail.

Complete Welded Radius RodPost with slugs - CHA 50L & 50R

BOLT ON SHOCK TOWERS

ALUMINUM- BRP 9262

STEEL -CHA 100BO

CHA 100BOF

CHA 111

CHA 100-1L

CHA 100-1RCHA 217

CHA 200

CHA 138LCHA 138L-1.5

AA 082C

CHA 199

CHA 170

CHA 138CHA 138-1.5

CHA 118

CHA 87

CHA 168

Diagonal Chassis Bar(goes between CHA 150 & 138L)

CHA 128

STD NOSE- CHA 1491 1/2” RAISED NOSE - CHA 151

CHA 100

CHA 106CHA 106-1.5

CHA 168

CHA 123

RIGHT - CHA 63-10LEFT - CHA 63-11

STEEL REPAIR SLEEVES1 1/2” X .095” Wall - CHA 90

1 1/2” X .120” Wall - (Use 1 1/4” X .095” Wall)1 1/4” X .095” Wall - CHA 1361 1/4” X .065” Wall - CHA 114

Complete welded �oor “X” - CHA 218Made from the following:

1- CHA 2001- CHA 2171- CHA 1181- CHA 199

CHA 75

CHA 74CHA 74-1.5

radius rod slug

BRP 1511(non-threaded)

BRP 1514(threaded)

CHA 82pocket only

CHA 50(tube only)

STD NOSE- CHA 1501 1/2” RAISED NOSE - CHA 152

1 1/4” - CHA 1271” - CHA 263

1 1/4” - CHA 126L1” - CHA 264

1 1/4” - CHA 126R1” - CHA 264

1 1/2” - CHA146R1” - CHA 265

BRP 1541brake line tab

1 1/2” - CHA146L1” - CHA 260

USE VENDOR CODE MFGWHEN ORDERING

CHA 6

2002 to Present Midrail Chassis Parts List

CHA 100BOC(CAP ONLY)


172

CHASSIS & COMPONENTSBICKNELL BODY MOUNTS

BICKNELL CRASH GUARDS

Color Codes-01 - White-02 - Red

-03 - Black-04 - Blue

-05 - Yellow-06 - X Red-07 - Silver-08 - Gray

*Powder Coated Crash Guards and Body MountsAlso Available. Add Color Code to End Of Part Number.

EXAMPLE - BRP 7111-03Rear Crash Guard Powder Coated Black

Heavy Duty Window Screen (.120” Thick Wire) - 26 1/2”W X 11 1/4”TTall Cage Window Screen (.120” Thick Wire) - 26 1/2” X 13 1/2”

BRP 7107BHDBRP 7119

P/NDESCRIPTION

WINDOW SCREENS

Side Bar Quick Pin (sold each) BRP 1527P/NDESCRIPTION

BRP 7111

BRP 464

BRP 7100

BRP 7101

BRP 7102

BRP 447

BRP 7099BRP 7098

BRP 7112 BRP 7110R

BRP 7106

BRP 7105

BRP 7103 BRP 7104

BRP 7096

BRP 7097

FRONT BUMPERSSTD Front BumperSTD Front Bumper - TALL1 1/2” Raised Front Bumper1 1/2” Raised Front Bumper - TALL3” Raised Front Bumper3” Raised Front Bumper - TALL

REAR BUMPERSRear Bumper

RIGHT SIDE BUMPERSStd Right Side BumperHeavy Duty Right Double Rail Bumper

LEFT SIDE BUMPERSStd Left Side BumperHeavy Duty Left Double Rail Bumper

INNER SIDE BAR MOUNTSMiddle Inner Side Bar HoopRear Inner Side Bar PostRight Side Tie Bar (ties 447 to 7100)Left Side Tie Bar (ties 447 to 7100)

BRP 464*BRP 464T*BRP 464-1.5*BRP 464T-1.5*BRP 464-3*BRP 464T-3*

BRP 7111*

BRP 7101*BRP 7098*

BRP 7102*BRP 7099*

BRP 447*BRP 7100*BRP 7114*BRP 7113*

STDDESCRIPTION STD CHROME LW CHROMELW

BRP 464CBRP 464TCBRP 464-1.5CBRP 464T-1.5C

BRP 7111C

BRP 7101CBRP 7098C

BRP 7102CBRP 7099C

BRP 464CM*BRP 464TCM*BRP 464-1.5CM*BRP 464T-1.5CM*

BRP 7111CM*

BRP 7101CM*

BRP 7102CM*

BRP 447CM*BRP 7100CM*

BRP 464CMCBRP 464TCMCBRP 464-1.5CMCBRP 464T-1.5CMC

BRP 7111CMC

BRP 7101CMC

BRP 7102CMC

RIGHT SIDE DOOR MOUNTSRight Straight Door MountRight 45° Door Mount

LEFT SIDE DOOR MOUNTSLeft Straight Door MountLeft 45° Door Mount

RIGHT QUARTER MOUNTSStandard Right Quarter MountHeavy Duty Right Quarter MountSyracuse Right Quarter MountSpring Steel Quarter Panel MountAluminum Angle Mount For Spring Steel

LEFT QUARTER MOUNTSStandard Left Quarter MountHeavy Duty Left Quarter MountSyracuse Left Quarter MountSpring Steel Quarter Panel MountAluminum Angle Mount For Spring Steel

BRP 7106SBRP 7106

BRP 7105SBRP 7105

BRP 7104BRP 7104HDBRP 7104SYRBRP 7096 (2)BRP 7097

BRP 7103BRP 7103HDBRP 7103SYRBRP 7096 (2)BRP 7097

STDDESCRIPTION LW

BRP 7106SCMBRP 7106CM

BRP 7105SCMBRP 7105CM

BRP 7104CM

BRP 7103CM

ROOF MOUNTSFront Roof MountRear Roof MountFront Roof Mount Extension

NOSE MOUNTSSTD Left Nose Mount (long)STD Right Nose Mount (short)Offset Left Nose Mount (long)Offset Right Nose Mount (short)Replacement Nose Mount Pocket(standard front nose)Replacement Nose Mount Pocket( 1 1/2” raised front nose)

BRP 7108BRP 7109BRP 7112

BRP 7110BRP 7110RBRP 7210BRP 7210R

MFG CHA106

P/NDESCRIPTION

MFG CHA106-1.5

NOTE- 2 spring steel and 1 aluminum angle mount is required for each side.

NOTE- 2 spring steel and 1 angle iron required for each side.

SEE PAGE 167 FOR TUBULAR BRACING DOOR

AND QUARTER PANELMOUNTS


CHASSIS & COMPONENTSKIRKEY SEATSCHASSIS CLIPS

BRP FCLIP1

BRP FCLIP2

BRP FCLIP3

BRP RCLIP1

BRP FCLIP1 - Standard NoseBRP FCLIP1-1.5 - 1 1/2” Raised Nose

Shock towers forward but also includes complete midrail so customer

can cut mid rail where he sees fit.Note: does not include radius rod post orradius rod post brace. No radiator postor radiator mount, no diagonal brace

or no part of floor. Doesnot include any floor parts or 1 1/2” uprights

for front of the 2X4.


Radiator Forward Clip, but includescomplete mid rail so customer can

cut mid rail where he sees fit.Note: Does Not include radius

rod post or radius rod post braces, anddoes not come with any part of

floor.


Complete front clip less 2X4.Includes radius rod posts

and braces and complete floor excluding2X4.

BRP RCLIP1 - Rear Clip (all cars)Includes rear bar, all 4 pocketsand the 2 uprights that attach

to the main roll cage.

KIRKEY SEATSSET-UP STANDS

Left Front Set-up Block - 4 7/16” tallRight Front Set-up Block - 3 11/16” tallLeft Rear Set-up Block - 4 1/4” tallRight Rear Set-up Block - 3 3/4” tall

BRP 1553BRP 1552BRP 1538BRP 1539

P/NDESCRIPTION

KIRKEY SEATSCHASSIS PARTS

Battery Hold Down For Modified ChassisThrottle Cross Shaft For Modified ChassisAluminum Floor Mounted Billet Gas Pedal with Roller BearingsSteel Flat Foot Style Gas PedalAluminum Flat Foot Style Gas Pedal22 and 24 gallon Fuel Cell Straps (sold in pairs)32 Gallon Fuel Cell Straps (sold in pairs)DIRTCar Syracuse LEGAL Fuel Cell Straps (sold in pairs)


P/NDESCRIPTION

BRP 1541

BRP 409

BRP 414

KIRKEY SEATSRAD MOUNTS

Full ContainmentRad Mount KitFull Containment LeftFull Containment RightFull Containment Top

DESCRIPTION P/N

BRP 1508FCBRP 1508LBRP 1508RBRP 1508T

BRP 1508FC BRP 9342

BRP 1508

BRP 1508E

KIRKEY SEATSCHASSIS BOLT KITS

Complete Chassis Bolt KitFront End Bolt kit

BRP 408-3BRP 408-5

P/NDESCRIPTION

BRP FCLIP1BO - Standard NoseBRP FCLIP1-1.5BO - 1 1/2” Raised Nose

BRP FCLIP1 - 1 Piece Shock Towers

BRP FCLIP1 - Bolt-On Shock Towers


BRP FCLIP3 - Bolt-On Shock TowersBRP FCLIP3BO - Standard Nose

BRP FCLIP3-1.5BO - 1 1/2” Raised Nose

BRP FCLIP2BO - Standard NoseBRP FCLIP2-1.5BO - 1 1/2” Raised Nose

BRP FCLIP2 - Bolt-On Shock Towers


New Style Clamp On Radiator Mount(sold in packs of 2)5” Wide Upper Radiator Mount3 3/4” Wide Upper radiator MountUpper Radiator Extension PostClamp On Radiator Mount (sold each)Lower Rad Tray5” Backset Billet Clamp On Rad Mount(sold in packs of 2)

DESCRIPTION P/N- RED

BRP 1508BRP 1508-1BRP 1508EBRP 1576BRB 2324

BRP 9342

BRP 9053 BRP 9053BK

P/N- BLACK

BRP 9053BK

FOR FIBERGLASS PARTS, CONSULT PAGE 166 BODY DIAGRAM

BRP 9374

Fits 2000 - To Current Mid Rail Chassis


SPRINT CARSPRINT CAR COMPONENTS

SC2300 SC2280 SC2260 SC2240

SC2290

SC2230

SC2270 SC2250

Steering Arms

3452

3652

3451

3651

LeftSide

LeftSide

PolishedFinish

RightSide

PolishedFinishRightSide

Front Rear

SC2130R-HD

SC2120L

SC2130R

SC2125R

SC2120L-HD

SC2691L

SC2689L

SC2688L

SC2687R

SC2686R

Torsion Arms

AngularContactBearings

Hub P/N WIN 3783-01 with alum. rotor mount

w. studs and races

Hub P/N WIN 3783 w. studs and races

Right HubLeft Hub with rotor mountSingle lip Seal (grease)Double Lip Seal (oil)Inner Bearing ConeInner Bearing CupBoltNutO-RingScrew In Hb CapShim (must use WIN 7291V

DESCRIPTION P/NWIN 3783WIN 3783-01WIN 7297VWIN 7291VWIN 8666WIN 8635WIN 8731WIN 8735WIN 8419WIN 3749-01WN 3748

QTY112222

1010222

5.737”5.737”5 1/2”5 1/2”

1 P/NWIN 3452WIN 3451WIN 3651WIN 3652

5.981”.981”.625”.625”

6.00”N/AN/A

6.375”

.598”N/AN/A

.500”

3.25”3.25”3.25”3.25”

2 3 4

1- Dimension from tie rod center line to king pin2- Dimension from tie rod center line to spindle

3- Dimension from drag link center line to spindle4- Dimension from drag link center line

to king pin center line5- Dimension from mounting bolt to mounting bolt

Pitman Arms

All Winters sprintsteering arms are

forged 7075-T6aluminum

Aluminum Front Hub Kits

18 1/2”18 1/2”16 3/4”16 3/4”

A P/NWIN SC2120LWIN SC2120L-HDWIN 2125RWIN 2130R

ANGLE

10°

13 1/4”13 1/4”15”15”15”

A P/NWIN SC2686RWIN SC2687RWIN SC2688LWIN SC2689LWIN SC2691L

B4 1/2”5 1/4”2 1/2”

3”3 1/4”

- Heavy Duty Styles are for racers that“feel” the arms flex under load- 10° Angle broach makes wheel rate stiffer- Contact patch under the arm is rounded toprevent premature wear

- Winters rear arms are solid from the bend to the back of the rear armto help reduce flexing. Winters is the only one to offer this feature- Winters rear arms are the only ones to offer a light press fit on theshock bolt mounting area.- Most popular right rear arm is WIN SC2687R- Most popular left rear arm is WIN SC2691L- 100% machined surface

Aluminum Front Spindle

Polished Finish

Forged 7075T6

Heat TreatedCenter-lessGround

Super TrickSpindle Nut Assembly

Option 8288 CasteNut

Uses King PinWIN 6476-02 andcap WIN 1109-2Aor WIN 1109-2

Sprint 10° Front Spindle KitSprint 10° Front Spindle Kit withTitanium Shaft

DESCRIPTION P/NWIN 3622

WIN 3622T

Spindle ShaftTitanium ShaftLockwasherLocknutCap ScrewSpindle BaseBushingCore Plug

DESCRIPTION P/NWIN 3459WIN 3459TWIN 2124WIN 2125WIN 2126WIN 3458WIN 7515WIN 7860

#11234567

11112121

QTY

-Broach “Straight” or Standard Arms10° Broach Arms for shorter sterring arm shaft, or formore header clearance- Lightweight arms offer more protection for steering box- The most popular style WIN SC2260- 100% Machined

StraightStraight10° Angle10° AngleStraightStraight10° Angle10° Angle

BROACH P/NWIN SC2230WIN SC2240WIN SC2250WIN SC2260WIN SC2270WIN SC2280WIN SC2290WIN SC2300

B

12”

12”

12”

12”

A11”11”11”11”11”11”11”11”


MINI / MICRO SPRINTKIRKEY SEATSMINI / TQ SPINDLES

7° Alum. Spindle / Steel Snout5 /8” King PinReplacement BushingReplacement SnoutCastle NutKing Pin Shim - 5/8” X .150”King Pin Shim - 5/8” X .125”

BRP 2990BRP 4155BRP 4153BRP 2990SBRP 4151BRP 4156BRP 4156-1

P/NDESCRIPTION7° Alum. Spindle / Steel Snout11/16” King PinAxle Eye - 1.125”dia. X 1.75” longReplacement BushingReplacement SnoutCastle Nut


P/NDESCRIPTION

10° Alum. Spindle / Steel Snout5 /8” X 3.650“ King PinReplacement BushingReplacement SnoutSpindle Castle NutKing Pin Shim - 5/8” X .150”King Pin Shim - 5/8” X .125”Left Front Steering ArmRight Front Steering Arm

BRP 4152HDBRP 4155BRP 4153BRP 4154BRP 4151BRP 4156BRP 4156-1BRP 4158BRP 4159

P/NDESCRIPTION10° Alum. Spindle / Steel Snout5 /8” X 3.850“ King PinReplacement BushingReplacement SnoutCastle NutKing Pin Shim - 5/8” X .150”King Pin Shim - 5/8” X .125”Snap RingAxle Eye

BRP 4191BRP 4194BRP 4153BRP 4192BOL 163FBRP 4156BRP 4156-1BRP 4193BRP 4163

P/NDESCRIPTION

Use 3006 or 4146 Hub

Use 4188 Hub



Note: Spindles, King Pins and King Pin Shims Sold Separately

KIRKEY SEATSMINI / TQ ALUMINUM HUBS

4 ON 4” Alum. Hub - 1/2”F StudsDust CapOuter BearingInner RaceInner Bearing and Seal

BRP 3006BRP 3007SUP LM11949BRP 2998BRP 2999

P/NDESCRIPTION4 ON 4” Alum. Hub - 1/2”F StudsReplacement Inner/Outer BearingReplacement Stud1/2”C Narrow Nylock1/2”F Flanged Whiz NutOuter Race

BRP 4188BRP 4148BRP 4190BOL 083CBRP 4150SUP LM 11910

P/NDESCRIPTION4 On 4” Alum. Hub OnlyInner BearingOuter BearingDust Cap

BRP 4146BRP 4148BRP 4149BRP 3007

P/NDESCRIPTION

DIRECT MOUNT WHEEL CENTERS

Front Aluminum Hub(fits BRP 4152HD hub) BRP 4144

P/NDESCRIPTIONFront Aluminum Hub(fits BRP 4191 hub) BRP 4189

P/NDESCRIPTIONSplined Aluminum Hub(fits all micro splined axles) BRP 4131

P/NDESCRIPTION

1 1/4” REAR KEYED STEEL AXLES

1 1/4” X .250“ Wall 4130 Steel Keyed Axle - Available in the following lengths: 44”, 46”, and 48”1 1/4” X .188” Wall 4130 Steel Keyed Axle - Available in the following lengths: 35”, 40”, 42”, and 44”

BRP 4097-lengthBRP 4321-length

P/NDESCRIPTION


MINI / MICRO SPRINTKEYED HUBS AND ROTORS

1 1/4” Split Sprocket Hub1 3/8” Split Sprocket Hub

BRP 4128BRP 4129

P/NDESCRIPTION1 1/4” Split Hub with 1/2”F Studs1 3/8” Split Hub with 1/2”F Studs1 1/2” Split Hub with 1/2”F Studs

BRP 4134BRP 4135BRP 4136

P/NDESCRIPTION 3/16” Rotor - 4 on 3” bolt Steel8“ diameter3/16” Drilled Rotor - 4 on 3” boltSteel - 9 1/2” Diameter

BRP 4177

BRP 4178

P/NDESCRIPTION

Rotors 6 on 5 1/4” Sprocket Hubs 4 on 4” Wheel Hubs

REAR SPLINED MICRO SPRINT AXLE

1 3/4” Gundrilled Aluminum Axles

55” Long Splined Aluminum Axle54” Long Splined Aluminum Axle50” Long Splined Aluminum Axle

BRP 4099BRP 4098BRP 4102

P/NLENGTH RH SPLINELENGTH

LH SPLINELENGTH

11”17 1/4”

18”

14”17 1/4”

18”

4 on 4” Splined Hub for 15° Nut BRP 4106P/NDESCRIPTION

4 on 4” Splined Hub for 30° Nut BRP 4105P/NDESCRIPTION

Splined Rotor Mount(Uses BRP 4177 & 4178 Rotor) BRP 4108

P/NDESCRIPTION

Splined Sprocket Hub - 6 on 5 1/4”1.200” Wide with 1/4”F mounting holes BRP 4126

P/NDESCRIPTION

Splined Sprocket Hub - 6 on 5 1/4”1.200” Wide with 1/4”F mounting holes BRP 4126-1

P/NDESCRIPTION

Micro Sprint Axle Nuts

Micro Sprint Hubs & Sprockets

15° Taper Right Hand Nut (Stallard)15° Taper Left Hand Nut (Stallard)30° Taper Right Hand Nut30° Taper Left Hand NutFlat End Right Hand Nut (Lafler)Flat EndLeft Hand Nut (Lafler)

BRP 4110BRP 4111BRP 4110-1BRP 4111-1BRP 4109BRP 4109-1

P/NDESCRIPTION

Micro Sprint Axle Spacers

1/2”1”2”

BRP 4114-1BRP 4114-3BRP 4114-6

P/NWIDTHSplined

1/8”1/4“3/8”1/2“3/4”1”1”

1 1/2“2”

2 1/2”3”

3 1/4”3 3/4”

4”5”6”

BRP 4094BRP 4094-1BRP 4094-2BRP 4094-3BRP 4094-4BRP 4094-5BRP 4094-5RBRP 4094-6BRP 4094-7BRP 4094-8BRP 4094-9BRP 4094-10BRP 4094-11BRP 4094-12BRP 4094-13BRP 4094-14

P/NWIDTHNon Splined

Splined Bearing InsertSplined Bearing Insert - WideTaper Spacer to Seat Nut

BRP 4115BRP 4116BRP 4113

P/NDESCRIPTION


MINI / MICRO SPRINTKIRKEY SEATSMINI SPRINT AXLE

48” Mini Sprint Axle (53” Overall) BRP 2900

P/NLENGTH RH SPLINELENGTH

LH SPLINELENGTH

16” 10”

KIRKEY SEATSMINI SPRINT AXLE

6 on 5 1/4” Sprocket or Brake Hub(Hench Style)- Brake Hub for 31 spline axle andHyper 046-142 rotor

BRP 2935

P/NDESCRIPTION

4 on 4” Splined Hub with 1/2”F StudsReplacement 1/2”F Stud4 on 4” Hub with Drive Pins4 on 4” Pressure Plate3/8” Nylock for replacement Pin

BRP 2930BRP 2932BRP 2936BRP 2936-1BRP 2917

P/NDESCRIPTION

1 7/8” Right Hand Axle Nut1 7/8” Left Hand Axle Nut

BRP 2892BRP 2893

P/NDESCRIPTION

Pin Splined Hubs

Sprocket Hubs

Rear Axle Nuts

1/4”1/2”5/8”1”

1.5”2”

2 1/2”3”

BRP 2909BRP 2909-1BRP 2909-2BRP 2909-3BRP 2909-5BRP 2909-6BRP 2909-7BRP 2909-10

P/NLENGTHAluminum Axle Spacers

Tapered Cone SpacerFemale Taper to Flat Spacer

BRP 2894BRP 2908

P/NDESCRIPTION

Aluminum Insert For 2910 BearingDouble Insert For BRP 2910 BearingSingle Insert For BRP 2910-1 Bearing

BRP 2905BRP 2907BRP 2906

P/NDESCRIPTION

Tapered Spacers

Bearing Inserts

KIRKEY SEATSBIRDCAGE BEARINGS

KIRKEY SEATSWING SLIDER

6011 Bearing for Use with BRP 29416211 Bearing for Use with BRP 29066010 Bearing

BRP 2910BRP 2910-1BRP 4124

P/NDESCRIPTION

MINI SPRINT ROTORS

Drilled Rotor -10” Diameter Steel X .320“ Thick (2” Spline)Drilled Rotor - 10” DiameterAluminum X .375” Thick (2” Spline)

BRP 63

BRP 63A

P/NDESCRIPTION

Aluminum Wing Slider for 1” Tubing BRP 4175P/NDESCRIPTION

KIRKEY SEATSTORSION STOPS

7/8” Broach Aluminum Torsion Stop3/4” Broach Aluminum Torsion Stop

BRP 2962BRP 4172

P/NDESCRIPTION

TORSION ARMS

5/8” Front Torsion Arm Blank1/2” Thick X 15 1/2” Long Torsion Arm Blank5/8” Thick X 15 1/2” Long Torsion Arm Blank

BRP 4170BRP 4164BRP 4165-1

P/NDESCRIPTION BROACH3/4”3/4”7/8”


KART & ACCESSORIESBRP SPINDLE HOUSING BRP FRONT HUBS

X-Kaliber Front Hub with Bearings InstalledReplacement Bearing (sold each)

BRP 4333BKBRP 4334

P/NDESCRIPTION

3/8” TIE RODS

6”7”

7 1/2”8”9”

10”10 1/2”

11”12”13”14”

14 1/2”16”

17 1/2“18”

72” UNTAPPED

BRP 4340-7BKBRP 4340-75BKBRP 4340-8BK

BRP 4340-10BKBRP 4340-105BK

BRP 4340-12BK

BLACK P/NLENGTHBRP 4340-6BRP 4340-7BRP 4340-75BRP 4340-8BRP 4340-9BRP 4340-10BRP 4340-105BRP 4340-11BRP 4340-12BRP 4340-13BRP 4340-14BRP 4340-145BRP 4340-16BRP 4340-175BRP 4340-18BRP 4340-720

PLAIN P/N

Aluminum Spindle HousingAdjustable King Pin Assembly (2 pieces)Weld On Spindle Plate (sold each)

BRP 4337BRP 4338BRP 4336

P/NDESCRIPTION

Replacement Spindle BearingSpindle Castle Nut

BRP 4339BRP 4345N

P/NDESCRIPTION

Left Front Spindle AssemblyRight Front Spindle AssemblyOffset Left Front Spindle Assembly - 20° SteeringOffset Right Front Spindle Assembly -20° Steering

BRP 4341BRP 4342BRP 4341-1BRP 4342-1

P/NDESCRIPTION

HEX STYLE STEERING

Hex Aluminum Steering HubBlack Hex Aluminum Steering HubUpper Shaft Support BlockLower Shaft SupportSteering Shaft Split PinSteering Shaft Nut5/8” Bore Aluminum CollarSteering Shaft SupportRod End (sold each) 2 Required

BRP 4366BRP 4366BKBRP 4368BRP 4369BRP 4370BRP 4371BRP 181-1ABRP 1105BRP 1101R

P/NDESCRIPTION

GAS PEDALS

BRAKE PEDALS

Gas PedalGas Pedal RodGas Pedal Rod SpringGas Cable TabGas CableGas Cable Fitting


P/NDESCRIPTION

Brake PedalBrake Rod1/4”F Clevis43” X 3/16” Brake Hose3/16” Brake Hose48” X 3/16” Brake HosePedal Grips (sold in pairs)

BRP 4390BRP 4391BRP 4389BRP 4419-43BRP 4419-XXBRP 4419-48BRP 4392

P/NDESCRIPTION

BRP 4333BK

BRP 4340-7BKBRP 4339BRP 4345N

BRP 4336BRP 4337

BRP 4338

BRP 4341BRP 4342

BRP 4342-1BRP 4341-1

BRP 4366

BRP 4392

BRP 4390

BRP 4393

BRP 4397

BRP 4395

BRP 4396

BRP 4394


KART & ACCESSORIESSTEEL AXLES REAR HUBS & SPROCKETS

7” Diameter X 3/16” Steel Drilled Rotor1 1/4” Rotor Mounting Hub 1 1/4” Rotor Mounting Hub - X Kaliber1 3/8” Rotor Mounting Hub

BRP 4355DBRP 4354BRP 4354BKBRK 4354-1

P/NDESCRIPTION

1 1/4” x .250” Wall Chrome Moly Hollow Axle 44” Long1 1/4” X .250” Wall Chrome Moly Hollow Axle 46” Long1 1/4” X .250” Wall Chrome Moly Hollow Axle 48” Long1 1/4” X .188” Wall Chrome Moly Hollow Axle 35” Long1 1/4“ X .188” Wall Chrome Moly Hollow Axle 38“ Long1 1/4” X .188” Wall Chrome Moly Hollow Axle 40” Long1 1/4” X .188” Wall Chrome Moly Hollow Axle 42” Long1 1/4” X .188” Wall Chrome Moly Hollow Axle 44” long1/4” X 8” Long Keystock for rear AxlesReplacement Snap Ring

BRP 4097-44BRP 4097-46BRP 4097-48BRP 4321-35BRP 4321-38BRP 4321-40BRP 4321-42BRP 4321-44BRP 4352BRP 4320S

P/NDESCRIPTION

Rear Weld On Bearing PlateAluminum Bearing CassetteRear Axle Bearing1 1/4” 2 Piece Aluminum CollarX Kaliber 2 Piece Aluminum Collar1/4” X 8” Long Keyway for Axle

BRP 4346BRP 4347BRP 4348BRP 4349BRP 4349BKBRP 4352

P/NDESCRIPTION

MCP MASTER CYLINDERS

REAR AXLE PARTS

Master Cylinder Assembly - DOT 5 FluidMaster Cylinder Assembly - DOT 3 Fluid

DOT 5 Rebuild KitDOT 3 Rebuild KitMaster Cylinder CapMaster Cylinder Cap Filler PlugBrass Fitting

BRK 15-1511BRK 15-1512

BRK 15-1510BRK 15-1509BRK 15-1513BRK 15-1516BRK 15-1528

P/NDESCRIPTION

PARTS

MCP Caliper Brake Pad (sold each)Enginetics Caliper Brake Pad (sold each)Caliper AssemblyCaliper Rebuild KitCaliper Adjuster AssemblyCaliper Bleed Screw (sold in packs of 4)

BRK 15-1501BRK 15-1503BRK 15-1531BRK 15-1530BRK 15-1536BRC 220-0064

P/NDESCRIPTION

BRAKE PADS / CALIPER

BRAKE ROTORS

1 1/4” Rear Wheel Hub 1 1/4” Lightweight Sprocket Hub1 1/4” Lightweight Sprocket Hub 1 3/8” Lightweight Sprocket Hub

BRP 4351BKBRP 4357BRK 4357BKBRK 4356

P/NDESCRIPTION

BRP 4351BK

BRP 4097-44

BRP 4346 BRP 4347

BRP 4348 BRP 4349

BRK 15-1511

BRP 4357

BRP 4356

BRP 4355D BRP 4354BK

BRK 15-1501 BRK 15-1503

BRK 15-1531


KART & ACCESSORIESUNIVERSAL CHAIN GUARD DELUXE CHAIN TOOL

CHAINUniversal Chain Guard (black powder coated)Chrome Universal Chain Guard

BRK 35-3594BRK 35-3593

P/NDESCRIPTION

SPROCKET GUARD

535455565758596061626364656667686970717273747678

BRK 35-3553BRK 35-3554BRK 35-3555BRK 35-3556BRK 35-3557BRK 35-3558BRK 35-3559BRK 35-3560BRK 35-3561BRK 35-3562BRK 35-3563BRK 35-3564BRK 35-3565BRK 35-3566BRK 35-3567BRK 35-3568BRK 35-3569BRK 35-3570BRK 35-3571BRK 35-3572BRK 35-3573BRK 35-3574BRK 35-3576BRK 35-3578

P/NTOOTH

ACCORD #35 SPROCKETS

53 - 64 Sprocket Guard65 - 72 Sprocket Guard

BRK 35-3590BRK 35-3591

P/NDESCRIPTION

KART LUBES

15.5 Oz Chain Lube Spray Canl4 Cycle Oil 1 Gallon Jug

BRK 35-3542OIL STROKE-LITE

P/NDESCRIPTION

#35 Deluxe Chain Tool#35 Replacement Pin

BRK 35-3500BRK 35-3501

P/NDESCRIPTION

Silver Pro Chain

#35 Connecting Link40” (106 links) of #35 Chain10 Feet (320 Links) of #35 Chain

BRK 35-3524BRK 35-3521BRK 35-3522

P/NDESCRIPTION

DRAGGIN SKIN RACING CLUTCH

13,14,15 tooth clutch kit15,16,17 tooth clutch kit13 - 22 Universal Drum12 Tooth Clutch Drum13 Tooth Sprocket


P/NDESCRIPTION

GASKETS

Tank Mount GasketIntake GasketHead GasketCrankcase GasketValve Cover GasketExhaust Gasket

BRK 60-6051BRK 60-6061BRK 60-6071BRK 55-5531

10 PACKDESCRIPTIONBRK 60-6020BRK 60-6040BRK 60-6050BRK 60-6060BRK 60-6070BRK 55-5530

SINGLE

Briggs Carb Diaphram(sold in packs of 10) BRK 45-4550

P/NDESCRIPTION

BRK 35-3594

BRK 35-3553

BRK 35-3590

BRK 35-3542 OIL STROKE-LITE

BRK 35-3500

BRK 35-3521

BRK 40-4012

BRK 60-6050

BRK 45-4550

INLINE FUEL FILTERS

BRK 65-6530

Inline Fuel Filter(fits 1/4” fuel line) BRK 65-6530

P/NDESCRIPTION


KART & ACCESSORIESSTEERING WHEELS FABRIC AIR FILTERS

Briggs Carburetor Support PlateThrottle Cable Stops (comes with screw) package of 4Briggs Throttle Return SpringRound Style Throttle ClevisBriggs Complete Throttle KitHonda Throttle Cable Guide

BRP 4381BRK 45-4541BRK 45-4530BRK 45-4520BRK 45-4510BRP 4386

P/NDESCRIPTION

BRK 45-4541

MUFFLER / EXHAUST PARTS

12” Steel Steering Wheel12” Aluminum Steering Wheel14” Aluminum Steering Wheel13 1/2” Top Gun AluminumSteering Wheel

BRP 4364BRP 4363BRP 4601

BRP 4362

P/NDESCRIPTIONBRP 4364

BRP 4363

BRP 4362

CARBURETOR ACCESSORIES

BRK 45-4510 BRP 4386

BRP 4381 BRK 45-4530BRK 45-4520

GAS TANKS / VENT TANKS

Kart Gas TankAluminum Vent Tank

BRP 9337BRK50-5050

P/NDESCRIPTION

BRK 50-5050

3” X 4”3.5” X 4”3.5” X 4”3.5” X 4”

BRK 65-5001BRK 65-5003BRK 65-5006BRK 65-5007

P/NO.D. X HEIGHT I.D.1 11/16” - Honda

2 1/16”2 7/16” - Briggs2 7/16” - Briggs

OFFSETNone - centeredNone - centeredNone - centered20° angle

BRK 65-5006 BRK 65-5007

3.5” X 5” Red - open end3.75” X 6” Yellow - open end3.75” X 6” Yellow - closed end3.5” X 8” Blue - open end4.5” X 5” Blue - open end


P/NDESCRIPTIONFoam Pre - Filters

BRK 65-3550

MOTOR MOUNT CLAMPS

1” I.D. Muffler1 1/8” I.D. Muffler1 5/16” I.D. Muffler

BRK 55-6010BRK 55-6011BRK 55-6012

P/NDESCRIPTIONRLV 4 Cycle Mufflers

Single GasketPackage of 10 gaskets

BRK 55-5531BRK 55-5530

P/NDESCRIPTIONExhaust Flange Gaskets

Air Filter Adaptors

Briggs Air Filter Adaptor - 2 7/16”Honda Air Filter Adaptor - 1 11/16”

BRP 4380BRP 4383

P/NDESCRIPTION

International Rail - Large MountAmerican Rail - Small Mount

BRK 30-3001BRK 30-3002

P/NDESCRIPTION

PLASTIC SEATS

Small Plastic SeatMedium Plastic SeatLarge Plastic SeatX Large Plastic Seat

BRK 05-0502BRK 05-0504BRK 05-0505BRK 05-0506

P/NDESCRIPTION

REUSABLE DIAPER PINS

BRK 30-3001

Large Pin - (spindles etc.)Small Pin - (1/4” - 3/8” bolts)

BRK 90-9001BRK 90-9002

P/NDESCRIPTION

BRK 90-9001BRK 90-9002

CLAMP BRACKETS / SEAT MOUNTS

Blank Steel Half Clamp1” Vertical Pocket (5” long)1” Vertical Pocket (7” long)3/4” Seat Post (10” Long)3/4” Seat Post (14” Long)1 1/8” Seat BraceWeld On Steel Tab (1/8” Hole)1 1/8” Aluminum Chassis Clamp1 1/4” Aluminum Chassis Clamp

BRP 4325BRP 4326BRP 4326-1BRP 4329BRP 4329-14BRP 4330BRP 4350BRP 4323BRP 4323-1

P/NDESCRIPTION

BRP 4323BRP 4350

BRP 4325

BRP 4330

BRP 4329

BRP 4326

BRP 4380


KART & ACCESSORIES

HOO 11305

HOO 11600

HOO 11800

HOO 11900

HOO 11920

HOO 11940

HOO 11960

Part Number Tread PatternTire Size

10.5 X 4.5-6

11.0 X 6.0-6

11.0 X 8.0-6

11.0 X 5.5-6

11.0 X 6.5-6

12.0 X 8.0-6

12.0 X 9.0-6

Tread Width Approx. Dia Approx. Circ. Compound

4.5”

6.0”

7.5”

5.5”

6.5”

8”

9”

10.5”

11.0”

11.0”

11.0”

11.0”

12.0”

12.0”

32.5”

33.0”

34.0”

34.5”

35.5”

37.5”

38.5”

RecommendedWheel Width

6.5”

8.25-8.5”

10“

6-6.5”

6.5-8“

9-10”

9-10”

D20A, D30A

D20A, D30A

D20A, D30A

D10A, D20A, D30A

D10A, D20A, D30A

D10A, D20A, D30A

D10A, D20A, D30AD50, D55

COMPOUND APPLICATIONSD10A is designed for a soft, wet, tacky track condition.D20A is slightly tougher than the D10A and works well on crumbs or marbled tracks.D30A is slightly tougher than the D20A and is designed for loose conditions or surfaces that clean o� and become dry-slick. The A40 is tougher than the D30A and is designed for drying track conditions that are transitioning and may lack overall grip (dusty, loose, sandy, etc.). The 50 compound is designed for a hard packed track that forms a high grip racing groove.

D10A 33-35 Burris SS-11D20A 43-46 Burris SS-22D30A 48-50 Burris B33BA40 55-57 Vega MBS (Yellow)50 60-62 Maxxis Pink 9.0

CROSS REFERENCE

HOOSIERCOMPOUND

COLDDUROMETER

CROSS REFERENCE

HOOSIER KART TIRES

KART LASER ALIGNMENT KITS

Deluxe Kart Laser Alignment Kit - Includes 1- rear axle laser adaptor,1- alignment mirror, 1- laser pointer, 1- BRP 9318 caster/cambergauge and plastic carrying caseStandard Kart Alignment Kit - Includes 1- rear axle laser adaptor, 1- alignment mirror, 1- laser pointer and plastic carrying caseReplacement Laser Pointer for BRP 9319 / BRP 9320Kart Digital Camber Gauge (comes with BRP 9316 and carrying case)

BRP 9319

BRP 9320BRP 9315BRP 9318

P/NDESCRIPTION

BRP 9319BRP 9318


MOD LITE & DWARF CARMOD LITE HUBS & ROTORS

DWARF / MOD LITE AXLES

23 Spline Toyota Taper (Bert Hub)

17 1/8”28 3/8”

BRP 8051BRP 8053

P/NAXLE LENGTH

31 X 24 Spline

16”29 3/4”

BRP 3100LBRP 3130L

P/NAXLE LENGTH

31 X 17 Spline

16”29 1/4”

MFG PCH54MFG PCH55

P/NAXLE LENGTH

Toyota X 17 Spline

16 3/4”28 1/2”

MFG PCH61MFG PCH62

P/NAXLE LENGTH

MFG PCH54 shown

Chevette Front Hub Assembly (comes with studs, races,& dust cap) **does not come with bearings or seals** Replacement Dust Cap For BRP 7996Replacement Inner RaceReplacement Outer RaceInner Bearing Outer BearingInner Hub SealReplacement Stud (4 required)9 1/2” O.D. X 1/4” Thick Rotor - 4 on 4.151” - 3.510” register Chevette Weld On Steel Spindle Snout

BRP 7996BRP 7997SUP L44610SUP LM11710SUP L44649SUP LM11749SKF 14858BRP 2932BRP 8013BRP 7995

P/NDESCRIPTIONChevette Front Hub Assembly

BRP 7996

BRP 8013

Replacement Inner or Outer RaceInner or Outer Bearing Inner Hub SealReplacement Stud (4 required)9 7/8” O.D. X 1/4” Thick Rotor - 4 on 4.219” - 3.56“ register10 1/2” O.D. X 1/4” Thick Rotor - 4 on 4.219” - 3.56” register17 Spline Aluminum Drive Flange for BRP 8003 Hub4 on 4 1/4” or 4 1/2” 24 Spline Aluminum Drive Flange for BRP 8003 Hub - red anodized

BRP 8003BRP 116BRP 118WIN 7203BRP 2065BRP 8011BRP 8012BRP 8006

BRP 347

P/NDESCRIPTIONQuick Change Rear Hub Assembly

Quick Change Rear Hub Assembly (comes with studs, races,& dust cap) **does not come with bearings, seals or drive flange**

BRP 8011BRP 8003 BRP 347BRP 8006

WHEEL SPACERS

1/8” Thick Wheel Spacer - 4 on 4 1/2” - Black Anodized1/4” Thick Wheel Spacer - 4 on 4 1/2” - Black Anodized3/8” Thick Wheel Spacer - 4 on 4 1/2” - Black Anodized1/2” Thick Wheel Spacer - 4 on 4 1/2” - Black Anodized

BRP 8026BRP 8027BRP 8028BRP 8029

P/NDESCRIPTION

BRP 8027

CALIPER BRACKETS

3/8” Brake Caliper Bracket3/8” Rear Axle RetainerUniversal Birdcage Mount - Fits 2 1/2” Tube (3 1/4“ mount - 9 7/8” O.D.)Brake Caliper Bracket For BRP 8064 (3 1/4“ mount - 9 7/8” O.D.)

BRP 8035BRP 8040BRP 8064BRP 8065

P/NDESCRIPTION

Toyota Front Hub Assembly (comes with 1/2”F studs, races,& dust cap) **does not come with bearings or seals**Toyota Front Hub Assembly - has 1/2“F holes for screw in studs (comes with races & dust cap - NO STUDS)Replacement Dust Cap For BRP 8001Replacement Inner RaceReplacement Outer RaceInner Bearing Outer BearingInner Hub SealReplacement Stud (4 required)9 7/8” O.D. X 1/4” Thick Rotor - 4 on 3.820” - 2.875“ register9 1/2” O.D. X 1/4” Thick Rotor - 4 on 3.820” - 2.875” registerToyota Weld On Steel Spindle Snout

BRP 8001

BRP 8000BRP 8008SUP LM67010SUP LM11910SUP LM67048SUP LM11949SUP CR18962BRP 2932BRP 8009BRP 8010BRP 8002

P/NDESCRIPTIONToyota Front Hub Assembly

BRP 8001

BRP 8010

BRP 8064

BRP 8000


MOD LITE & DWARF CAR

ENGINE ACCESSORIES

Fuel Pump Clamp - Fits 1” tube and 2 1/2” fuel pumpAir Adaptor

BRP 8080MFG PCH16

P/NDESCRIPTION

MOD LITE RACK & PINION

SHOCK SLIDERS & COIL KITS

CHASSIS CLAMPS

3RD LINK / PANHARD MOUNTS

Honda Engine FlangeKawasaki Engine Flange (anodized black)Suzuki Engine Flange (anodized black)

BRP 8020BRP 8021BRP 8022

P/NDESCRIPTION

ENGINE FLANGES

BRP 8022

ENGINE FLANGES

BRP 8080

BRP 9331

10:1 Ratio Mod Lite Rack & PinionSteel Tie Rod ClevisNon Adjustable Micro Sprint RackSplined Adaptor For Mod Lite Rack to 5/8” Weld On ShaftSplined Adaptor For Mod Lite Rack to 3/4” Weld On Shaft

BRP 9321BRP 9321CBRP 9331BRP 9333BRP 9334

P/NDESCRIPTION

Panhard Mount For Quick Change Rear - 3/8” thick PRO stylePanhard Mount For Quick Change Rear - 3/4” thick PRO stylePanhard Mount - Single SidedMod Lite Adjustable Panhard Mount - Double Sided3rd Link Mount For Mod Lite - Clamps on 2 1/2” Tube (use with BRP 8072)Left Side 3rd Link Mount - Bolts To Rear End Center Section


P/NDESCRIPTION

Multi Hole Slider Clamp1” Extended Shock Slider Clamp1” Double Shear Shock Slider AssemblyLeft Front Mod Lite Shock SliderRight Front Mod Lite Shock Slider

BRP 8032BRP 8033BRP 8034BRP 9138BKBRP 9139BK

BLACK P/NDESCRIPTION

BRP 9138BRP 9139

RED P/N

1” Standard Short Chassis Clamp - 1/2” Hole1” Standard Long Chassis Clamp - 1/2” Hole



RED P/N

BRP 8059

BRP 8034 BRP 9138BK

BRP 4180

Documents

2015 Bicknell Racing Products Catalog