Upload
yovelin-ivanov
View
219
Download
0
Embed Size (px)
Citation preview
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 1/20
NCCCO Certication Courses
Mobile Crane Operator
Overhead Crane Operator
Qualied Signal Person
Qualied Rigger Level 1
Qualied Rigger Level 2
Mobile Crane Inspector
Overhead Crane Inspector
Forklift Operator
Aerial Lift Operator
Rigging Inspector
Pedestal Crane Inspector
Professional Operator Developme
Accredited U.S. Dept. of Labor
29 CFR Part 1919
2014
800.521.7669www.cranetech.com
Serving the Material Handling Industry
Since 1977
Superior Service Quality Training Reliable Resu
Safety through EducatTraining Schedule
Programs Available
Crane Tech fully endorses the national
certication program offered by
the National Commission for the
Certication of Crane Operators
(NCCCO), and will prepare candidates
for the CCO certication examinations.
Scan with your mobile device to
check programs and specials !
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 2/20
In recent years, requirements for training and qualicaons rapidly evolved introducing strict ne
requirements. Crane Tech remains at the forefront of these developments, oering customers a wid
variety of operator qualicaon and cercaon opons. We connually invest in the developme
of new programs and methods, exploring the latest technologies, and seng industry standards wi
the most advanced training and evaluang soluons.
Whether you’re interested in Open Enrollment training at one of our locaons, or our highly eecvOn-Site training, Crane Tech is your ideal source. We back up our service with a deep knowledge bas
unsurpassed customer service, and more than thirty seven years in the material handling trainin
and inspecon eld.
ContentsCourse Title Page
On-Site Training ...........................................................................4
On-Site NCCCO Cered Training ................................................5
* Mobile Crane Professional Operator Development .................6
* Cered Mobile Crane Operator NCCCO .................................7
† Mobile Crane Operator (3-day) ................................................8
* † Mobile Crane Operator (4-day) Hands-On ............................8* † Mobile Crane Inspector .........................................................9
† Qualied Rigger Level 1 ...........................................................10
† Qualied Signal Person ...........................................................11
† Qualied Rigger Level 2 (2-day) ..............................................12
* † Qualied Rigger Level 2 (3-day) Hands-On ...........................12
Rigging Inspector........................................................................13
* † Overhead Crane Operator ....................................................14
* † Overhead Crane Inspector ...................................................15
† Forkli Operator ......................................................................16* † Aerial Li Operator & Inspector ...........................................17
* † Pedestal Crane Inspector ......................................................18
Train the Trainer .........................................................................19
Easy Registraon for Open Enrollment Courses
• Call 1.800.521.7669 and ask for program sales, or
• Register on-line at www.cranetech.com
To Inquire Call Toll Free 800.521.7669
Why Choose Crane Tech
All courses noted with an asterisk (*) require PPE. See boom of page 3.
All courses noted with a dagger (†) are available as Train-the-Trainer.
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 3/20
Hands-On Training at Our State of the Art Facilies
Crane Tech’s Tampa Training Facilies provide expert instrucon in state of the art classroom and hands-o
training centers. With more than 20,000 sq. feet under roof, ve overhead bridge cranes, mobile cranes, forkli
aerial li, and large assortment of rigging gear there is lile that can’t be accomplished. Hands-on training
simply the best way to learn, and our Tampa Training Centers are the best in the business.
Training Manuals and Documentaon
Professionally developed and fully illustrated course manuals support every course and will serve as a valuab
reference for many years. With the excepon of required PPE students need only show up and we do the re
Cercates of Training, course transcript, and wallet card are provided for all students successfully complen
training. Crane Tech documents are accepted by OSHA and all Federal agencies as evidence of qualied trainin
We ensure each program meets industry requirements using the most current standards and regulaons.
Federal Training Requirements
From NCCCO Cercaon to qualied training Crane Tech oers numerous programs to meet the new OSH
1926 Subpart CC regulaon. Persons working under General Industry, Marime, API, or any of the ma
Government Agency requirements will nd Crane Tech oers a complete line of programs to sasfy your need
Site Safety Assessment and On-Site Consultants
An accident can have serious long-lasng eects on the health and stability of a company. Hazards overlooke
on a daily basis by insiders can be revealed by the objecve eye of an experienced third party. We can asse
your personnel’s knowledge and skills, material handling pracces, records, policies, and exisng documentao
for gaps that can cost thousands in nes and lost work if not corrected.
Accident Invesgaon & Ligaon Support
Crane Tech’s ability to cut through non-essenal issues, nd facts, and provide documented support
unsurpassed. Our sta has invesgated hundreds of accidents and we are oen retained by OSHA to tra
their personnel and to provide support on accident invesgaons.
Enroll Two Students and the Third is Free
For select programs a third parcipant is free when you enroll two parcipants. A 33% savings! See Discoun
on page 19. Certain restricons apply for Train-the-Trainer Programs.
PPE Requirements for Hands-on Courses
Watch for the safety icon in this schedule which indicates a PPE requirement. For all noted programs be su
to bring; Hard hat, Eye protecon, Steel toe shoes/boots, Hearing protecon, and Work gloves. Crane Te
will provide high visibility safety vests and, where required, safety harness and lanyard.
Setting the Standard
3 r d F ree
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 4/20We deliver training worldwide!
On-Site Training
Specialized On-Site Training: All courses oered in this schedule are regularly conducted on-site
customers work locaons throughout the United States and worldwide. Crane Tech provides yo
your company, and your employees an exceponal training program with these key benets.
• Customized Training: Crane Tech Training Programs are customized to meet your speci
equipment, exact needs, regulatory codes, and personnel’s background.
• Flexible Schedule: Your schedule is our schedule. First, second, or third shi, weekends or eve
holidays― we provide training as your schedule requires.
• Cost Eecve: On-Site courses are a great value when even a few employees require trainin
Avoid costly hotel and per diem costs, airline ckets and addional employee absence frotheir work locaon.
• Expert "Field Experienced" Instructors: Crane Tech instructors have extensive material handlin
backgrounds. Instructors are ready to deliver a results oriented program to solve your company
training needs.
Every Course Listed In This ScheduleIs Available For On-Site Presentaon!
A Paral Lisng of Courses Available for On-site Presentaon
• NCCCO Cered Operator• Mobile Crane Operator
• Mobile Crane Inspector
• Qualied Signal Person
• Qualied Rigger
• Master Rigger
• Overhead Crane & Hoist Operator
• Overhead Crane & Hoist Inspector
• Pedestal Crane Operator
• Pedestal Crane Inspector
• Rigging Gear & Sling Inspector
• Aerial Li Operator• Forkli Operator
• Digger Derrick Operator
• Boom Truck Operator
• Bucket Truck Operator
• Tower Crane Operator
• Harbor Crane Operator
• Straddle Crane Operator
• Reach Stacker Operator
• Backhoe & Loader Operator
• Container Crane Operator
For more informaonor to speak with a training specialist
call 800.521.7669
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 5/20
On-Site NCCCO Training
Crane Tech’s commitment to the Naonal Commission for the Cercaon of Crane Operato
(NCCCO) began in the mid 1990’s and remains strong today. We volunteer hundreds of man hou
annually to various NCCCO commiees, as well as hosng numerous NCCCO commiee and tasforce meengs over these many years. We are a proud NCCCO Planum sponsor, and our compan
is represented by membership on several NCCCO commiees and the NCCCO Commission.
Our commitment to the NCCCO ensures each cercaon course provided is properly oriented fo
NCCCO tesng. We will ensure your personnel are up to the NCCCO test challenge by providing
fundamental safety course that covers all subjects domains. Each course is presented by instructo
who are NCCCO Cered operators and NCCCO Accredited praccal examiners.
Persons who successfully complete Crane Tech programs are beer equipped to make posiv
decisions regarding safety and control of their equipment. We believe that it’s not how well on
does on a test, but how well one can maintain an accident free job site long term.
Crane Tech is prepared to help you gain cercaon and has a detailed process that takes you ste
by-step from iniang your NCCCO applicaon to achieving cercaon.
• Signal Person ........................... (parcipated on the task force)
• Rigger Level 1 ................................... (serve on the commiee)
• Rigger Level 2 ................................... (serve on the commiee)
• Mobile Crane Operator .................... (serve on the commiee)
• Arculang Crane Operator. ............ (serve on the commiee)
• Digger Derrick Operator ................... (serve on the commiee)
• Overhead Crane Operator................ (serve on the commiee)
• Crane Inspector ....................... (parcipated on the task force)
• Li Director ............................. (parcipated on the task force)
Crane Tech’s Service on NCCCO Commiees
Crane Tech has a full me sta dedicated to help our customers gain NCCCO cercaon.
We complete all applicaons and paperwork, walking you through the enre process.
Crane Tech is a proud NCCCO Planum Sponsor
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 6/20
Mobile Crane Professional Operator Development
If you need crane operators and need them fast, Crane Tech’s Mobile Crane Professional Operat
Development program puts operators on track. Professional Development training provides th
knowledge and skills to become an NCCCO cered crane operator with extended training th
details each of the subjects necessary for this professional trade. As a bonus, you will receive traininand tesng required by OSHA to become a Qualied Rigger.
For one low price you have the opportunity to gain the qualicaons and cercaons neede
to work where OSHA and employers demand NCCCO cercaon. And, because of the extende
topics of li planning, crane inspecon, personnel handling, and assembly/disassembly, you w
return to work capable of lling the vital role of crane operator.
Training conducted at Crane Tech’s Tampa Training Center includes hands-on operaon of mobi
cranes and extended training necessary to provide a thorough understanding that’s necessary fo
safe and ecient crane operaon.
15 day ....... Course 4002 ....... $2,995
Tampa, FL....................January 13-31
Tampa, FL........................ March 3-21
Tampa, FL................. April 28-May 16
Tampa, FL............................July 7-25
Tampa, FL...................October 13-31
Tampa, FL.................. December 1-19
Course Locaons & Dates
Mobile crane operaon safety
Crane set-up and ground stability
Load chart exercises and workshops
Operator aids and LMI's
Crane component inspecon
Wire rope: types & inspecon
Crane operaon: set-up and driving skills
Hands-on load control training
Li planning
Crane assembly and disassembly
Standards and regulaons
Emergency procedures
Mobile Crane Operator manual
Qualied Rigger Level 1 manual
OSHA 1926 Subpart CC manual
ASME B30.5
Plus references and course
materials too numerous to list.
Course Topics Include
What You Will Receive
PPE listed on page 3 is
required for this program.
Week 1: 4-day mobile operator training with 1-dahands-on training - plus Qualied Rigger Leve1 training and tesng to meet OSHA §1926Subpart CC requirements.
Week 2: Combined mobile crane hands-on traininand technical training for load charts, rangediagrams, crane set-up, li planning, hydraulisystems, wire rope inspecon, regulaons,pre-operaonal inspecon and operaontechniques.
Week 3: NCCCO Cercaon Test prep training thincludes all fees for: Core exam, two specialtyexams, and one praccal exam.
What this course includes
To Inquire Call Toll Free 800.521.7669
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 7/20
Certied Mobile Crane Operator NCCCO
Crane Tech has provided NCCCO Cered programs for 15-years. Our programs place primaremphasis on the four knowledge domains specied under NCCCO guidelines. Candidates learwhat's required for safe crane operaon then pracce for tesng with tests of the same contenand structure as provided for cercaon.
For those who may need extra me learning the subjects or me praccing on a mobile crane wstrongly recommend aending our Mobile Crane Operator or Professional Operator Developmencourse. Each instructor for these programs is an NCCCO cered operator and expert trainer.
With several NCCCO licensed praccal examiners on sta, your program can be delivered at th
site of your choice. Read more about Crane Tech's NCCCO commitment on page 5 of this schedule
Crane Tech fully endorses the national
certication program offered by the
National Commission for the Certication
of Crane Operators (NCCCO), and
will prepare candidates for the CCO
certication examinations.
*Price includes core exam, two specialty written exams and one TSS or TLL practical exam. Additional specialty exams and practical exams may be added.
Crane Tech is a proud NCCCO Planum Sponsor
Course Locaons & Dates
3 day .....Course 3608 .....$1,895*
Tampa, FL................ January 27-31
Tampa, FL.................. March 17-21
Tampa, FL......................May 12-16
Tampa, FL.......................July 21-25
Tampa, FL................October 27-31
Tampa, FL............ December 15-19
The 3-day technical prep
course is scheduled for
Mon-Tues-Wed followed
by NCCCO wrien and
praccal examinaons on
Thursday and Friday.
PPE listed on page 3 is
required for this program.
Crane Tech has a full me sta dedicated to help our customers complete applicaons and necessar
paperwork for cercaon. We do all the ling and walk you step-by-step through the process.
To Inquire Call Toll Free 800.521.7669
To Enroll Call 800.521.766
Ask about our NCCCO Study Reference Kit for this program.
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 8/20Train-the-Trainer is available for this program
Crane operaonal characteriscs
Frequent and periodic inspecons
How to read and apply load charts
How to use a range diagram
Quadrants of operaon
Reeving and line pull
Proper mobile crane set-up
Evaluang ground and soil stability
Outriggers and pad loading
Use of jibs and extensions
Mobile Crane Operator
2 & 3 Day Course Locaons 3 Day Course Locaons
Mobile Crane Operator Training is designed for operators, safety personnel, and supervisors of a
types of Mobile Cranes. Training thoroughly covers cranes regulated by OSHA, MSHA, API and ASM
B30.5. You will learn crical elements that include; operaonal characteriscs, load charts, prop
set-up, use of jibs and extensions, load indicang devices, crane stability, structural competenc
pre-use and periodic inspecons, hazard awareness, power line hazards, operator responsibilie
job planning, with extensive workshop interacon.
Three day courses are oered at all locaons. Those wishing to receive hands-on operator trainin
should aend the 4-day course at our Tampa Training Center.
Course Topics Include
Stability vs structural competence
Evaluang the load
Wire rope types and inspecon
Accident prevenon and root cause
How to determine load weight
Eects of side loading
Power line contact prevenon
Crane hands signals
Personnel liing
OSHA/ASME compliance
Course Locaons & Dates
3 day ........ Operator Training ......................Course 1002 ..........$895
4 day ......... Operator Hands-On ...................Course 4003 ........$1095
3 day ......... Train-the-Trainer .......................Course 3612 .......$1,395
4 day ......... Train-the-Trainer Hands-on........Course 3587 .......$1,895
Tampa, FL.................. January 13-16
Tampa, FL........................ March 3-6
Tampa, FL............... April 28 - May 1
Tampa, FL.......................... July 7-10
Tampa, FL................. October 13-16
Tampa, FL..................December 1-4
Houston, TX .......... February 10 - 12
Houston, TX ...................... April 7-9
Houston, TX ...................... June 2-4
Houston, TX...................August 6-8
Baton Rouge, LA ....... August 18-20
Houston, TX ............... October 8-10
Accidents don't happen by chance, they are a consequence of unsafe pracces.
PPE listed on page 3 is required for
Tampa Training Center programs.
Suitable for Operators, Supervisors,
and Safety Personnel.
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 9/20To Inquire or Enroll Call Toll Free 800.521.7669
Mobile Crane Inspector
Machine size and characteriscs
Operaonal modes
Major and minor components
Capacity and limitaons
Periodic inspecons objecves
Hazard awareness
Accident prevenon
Crane failures and prevenon
Mobile Crane Inspector training is an in-depth program designed for anyone responsible for mobi
crane inspecon, equipment reliability, loss control, and equipment management. Learn cran
inspecons and OSHA compliance from a company with more than four decades of OSHA accredite
compliance inspecon experience. When aending at our Tampa Training Center you will spenme hands-on inspecng cranes.
Parcipant Materials Include
OSHA §1926 Subpart CC Manual, Mobile Crane Inspector Manual, Li Equipment Basics,
Guide to OSHA (includes general industry standards).
Yours Free with Aendance
Crane Inspector’s tool kit that includes: Steel calipers, Sheave groove gauge, Depth scale,
Magnec pickup, Screwdriver, Pocket magnier, Calculator, Flashlight, Pocket notebook, Wire
rope breaking strength wallet card, and Belt pack.
Hands-on training when aending at our Tampa Training Center
PPE listed on page 3 is required for
Tampa Training Center programs.
Course Locaons & Dates3 day .........Inspector Training ...........Course 1004 ...........$895
4 day ..........Inspector Hands-On .........Course 3610 ........$1,395
Inspector and Hands On Training Inspector Training
Tampa, FL.....................................February 24-27
Tampa, FL.............................................July 28-31
Tampa, FL.....................................November 3-6
Houston, TX............................March 17-19
Houston, TX.................................June 9-11
Baton Rouge, LA.....................August 25-27
Houston, TX..........................October 27-29
OSHA: compliance and inspecons
Recognion of unsafe equipment
Wire rope selecon and installaon
Wire rope inspecon and rejecon
Component inspecon
Sheave inspecon Pneumacs and hydraulic systems
Inspector safety
Course Topics Include
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 10/20
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 11/20
Qualied Signal Person
Qualied Signal Person training ensures you meet current OSHA §1926 Subpart CC requiremen
as a qualied person. This is a dynamic program that has rapidly become one of our most popula
courses. Federal OSHA §1926.1428 requires that persons who signal cranes in construco
acvies receive training and tesng to be a qualied signal person. This program is 4-hours oclassroom instrucon with one wrien exam followed by individual praccal exams.
Many training dates are scheduled back-to-back with
Qualied Rigger Level 1 programs. Aend both courses and save!
Tampa, FL.......................January 9Houston, TX ................ January 16
New Orleans, LA ......... January 20
Houston, TX .............. February 13
Tampa, FL ................. February 18
New Orleans, LA ........... March 13
Tampa, FL ..................... March 24
Houston, TX .......................April 1
Lafayee, LA ....................April 21
Tampa, FL ........................April 21
Houston, TX ....................... June 5
Terminology of the new standard
Crane characteriscs & limitaons
Signal person responsibilies
When is a signal person required
Hand, voice, and audible signals
Working around power lines
Step and touch potenal
Clearance requirements for cranes
Tampa, FL ........................ June 24Houston, TX ..................... June 27
Houston, TX ................... August 4
Tampa, FL .................... August 12
Baton Rouge, LA .......... August 21
Tampa, FL .............. September 22
Houston, TX ................October 13
Lafayee, LA .............November 3
Houston, TX ............November 11
Tampa, FL ...............November 24
Course Topics Include
Train-the-Trainer is available for this program
Reacon to power line contact
Keeping clear of the load (Fall zone)
Requirements of §1926 Subpart CC
Dangers of side loading
Crane dynamics
Dangers of two-blocking
Causes of mobile crane pping
Causes of structural failures
This course provides signal persons the knowledge of crane dynamics
and operaon that’s required by §1926 Subpart CC.
Course Locaons & Dates
1 day ............ Signal Person .................Course 3902 .............. $595
1 day ............. Train-the-Trainer ...........Course 3910 ........... $1,395
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 12/20
Qualied Rigger Level 2
When aending our Tampa Training Center learn hands-on
with rigging acvies that reinforces your skills.
Wire rope slings
Synthec slings
Chain slings
Liing beams & spreader bars
Come-a-longs & lever hoists
Shackles
Hooks
Pre-use inspecon
Houston, TX ............ January 29-30
Houston, TX .......... February 24-25
Baton Rouge, LA ... February 27-28
Houston, TX ..................... April 2-3
Houston, TX ................. June 25-26
Houston, TX ........ November 12-13
Aend as a Train-the-Trainer program and receive all the materials and skillsnecessary to provide this training at your facility.
Qualied Rigger Level 2 training provides the knowledge and skills necessary for a person to work a
a journeyman level rigger. This course prepares persons to perform rigging calculaons and to sele
and apply rigging for safe controlled load handling. Persons compleng this training will understan
their responsibility to ensure proper rigging methods are used and that all variables which coulresult in a rigging failure are accounted for through planning and proper selecon of gear. Trainin
sases the qualicaon requirements for OSHA §1926, §1910, and other required qualicaons
Train-the-Trainer is available for this program
Sling rangs
Sling angle stress
Sling applicaon
Sling selecon
Rigging gear selecon
Rigger/personnel safety
And, much more...
Course Topics Include
Tampa, FL...............February 19-21
Tampa, FL....................... April 9-11
Tampa ........................... June 25-27
Tampa, FL...................August 13-15
Tampa, FL...................October 8-10
Course Locaons & Dates
2 day ........ Rigger Training ........................Course 4004 .......... $795
3 day ....... Rigger Hands-on ......................Course 3940 .......... $995
2 day ........ Train-the-Trainer .....................Course 3615 ....... $1,595
3 day ........ Train-the-Trainer Hands-on ......Course 4007 ....... $1,895
2 day Course Locaons2 & 3 day Course Locaons
PPE listed on page 3 is required for
Tampa Training Center programs.
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 13/20
If you have been wanng to improve your rigging inspecon skills, then this program is the mo
comprehensive in the industry. We start with a wide assortment of slings and rigging gear wi
varying degrees of damage and deciencies that allows parcipants to learn inspecon hands-o
Rigging Inspector training provides technical and hands-on training in an environment unique in thmaterial handling eld. You will learn the principles and standards specic to rigging gear and slin
inspecons. This program has a compliance basis under OSHA, ASME & API industry standards an
specic to state and government agency requirements where applicable.
To Enroll Call Toll Free 800.521.7669
R igging Inspector
Course topics include
Wire rope types and inspecon
Chain sling inspecon
Synthec sling inspecon
Hook and shackle inspecon
Rings and link inspecon
Eye bolts and hoist ring inspecon
Plate clamp and beam clamp inspecon
Hand chain and lever hoist inspecon
Below-the-hook liing devices
Sling tags and capacity markings
Proper inspecon techniques
Compliance OSHA/ASME & API
Common causes of rigging damage
Record keeping requirements
Use of inspecon tools
Course Locaons & Dates3 day ..........Course 3525 ........... $1,195
Morgan City, LA.................January 22-24
Houston, TX.....................February 19-21
Tampa, FL...............................April 16-18
Houston, TX............................June 18-20
Morgan City, LA...........September 17-19
Houston, TX......................October 15-17
Morgan City, LA............November 19-21 For more informaon
or to speak with a
training specialist call
800.521.7669
This training includes many
sling and rigging components
with varying degrees of
deciencies. Inspectors learn
hands-on how to inspect and
document all the deciencies
found on each component.
Technical training combinedwith extensive hands-
on insures you have the
knowledge and skill required
to perform a comprehensive
inspecon.
An excellent program forinspectors and those who
maintain rigging equipmentfor any company.
This program is mandatoryfor oshore inspecons ofslings and rigging gear.
3 r d F ree
To Enroll Call 800.521.76
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 14/20Train-the-Trainer is available for this program
Overhead Crane Operator
If you have previously aended any Crane Tech courses ask about
our Refresher courses available for all programs.
Course Locaons & Dates
2 day .....Operator ............... Course 3609 ... $795
2 day .....Train-the-Trainer ...Course 3614 ..$1,495
Houston, TX .....................................January 27-28
Tampa, FL..................................................April 7-8
Houston, TX ..........................................June 23-24
Tampa, FL....................................September 29-30
Houston, TX.....................................October 20-21
Tampa, FL................................... November 10-11
Baton Rouge, LA ......................... November 17-18
Overhead crane and hoist training provides instrucon on safe operang pracces, proper loa
handling, pre-use inspecon and accident avoidance. We place emphasis on informing the operat
on the interacon of overhead crane components which makes an operator beer able to provid
early detecon of unsafe condions.
Size and characteriscs of cranes
Operaonal modes
Major operaonal components
Emergency shutdown procedures
Verify access to runway disconnect
Lockout/tag-out requirements
Inspect visual and audible hazards
Control labelling and condioning Pendant control strain relief
Warning and capacity labelling
Wire rope or chain condion
Requirements for guards
Emergency stop funcon
Bumper and stop requirements
Limit devices and control funcons
Load control and operaon safety
Brake test procedure
Load block, hook and latch
How to determine load weight
How to avoid side pulling load swing
How to conduct a hoist brake check
Load path and personnel safety
Acvaon of warning alarm Operaon of hoist, bridge, and trolley
How to avoid shock loading
Floor capacity for load placement
Reporng deciencies
Regulaons for operators
Crane manufacturer’s instrucons
Funcons and limitaons of cranes
Course Topics Include
When aending our Tampa Training Center learn
hands-on using overhead cranes to reinforce your skills.
PPE listed on page 3
is required for Tampa
Training Centerprograms.
NCCCO Cercaon available for overhead crane operators.
3 r d F ree
To Enroll Call 800.521.76
4
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 15/20
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 16/20
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 17/20
Aerial Li Operator training provides instrucon to ensure equipment operators are fully aware
the hazards associated with this type equipment and understand their responsibility for connu
safety. Both one and two day programs include operaon safety and pre-use inspecon with Tamp
Training Center programs providing hands-on training for operaon skills.
Aerial Lift Operator
This program ensures operators meet OSHA
training and competency requirements.
Aend at our Tampa Training Center and receive technical and hands-on training.
Train-the-Trainer is available for this program
Failures and accident avoidance
Observing for unsafe condions
Prevenon of unsafe acts
Pre-use inspecon
Safety procedures for operators
Operang and maneuvering skills
Ground crew safety
Tampa, FL....................January 7 - 8
Tampa, FL...............February 11 -12
Tampa, FL....................March 27-28
Tampa, FL.....................April 15 - 16
Tampa, FL.....................June 17 - 18
Tampa, FL.....................August 5 - 6
Tampa, FL................. ..October 7 - 8
Tampa, FL.............November 18-19
Houston, TX ................... February 3
Houston, TX .................February 18
Houston, TX ........................June 13
Houston, TX.....................August 12
Baton Rouge, LA .............August 29
Houston, TX...................October 31
Baton Rouge, LA ....... November 25
1 & 2 day Course Locaons1 day Course Locaons
Use of ground controls
Capacity limitaons
Baery safety and charging
Refueling safety
Hands-on performance training
Periodic inspecon requirements
Hands-on operaon and inspecon
Course Topics Include
Course Locaons & Dates
2 day ...... Operator Hands-on .........................Course 3405 ......... $795
1 day .....Train-the-Trainer .............................Course 3616 ...... $1,395
2 day ...... Train-the-Trainer Hands-on .............Course 4006 ...... $1,895
PPE listed on page 3 is required for
Tampa Training Center programs.
3 r d F ree
To Enroll Call 800.521.76
Provided With All
Train-the-Trainer programs
Detailed Training Syllabus
PowerPoint Presentaons Workshops Wrien Tests Performance Tests Student Manuals See more details - page 19
What You Will Learn
Operators learn pre-use inspecon
requirements and methods, safe
use and operaon skills, ground
controls and regulaons that aectaerial li operaon.
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 18/20
Pedestal Crane Inspector
Course Topics Include Types of pedestal cranes
General operang pracces
Pedestal crane load rangs
Crane components inspecon
Wire rope: types and characteriscs
Wire rope: inspecon methods and rejecon criteria
Inspecon requirements and documentaon
Pedestal crane tesng
Pedestal crane inspector safety
Pedestal cranes working in the oshore industry are subject to forces and condions that requi
the most comprehensive inspecon process available. Crane Tech has worked with some of th
largest oil exploraon and producon companies in the world, helping improve their inspector
perform pedestal crane inpecons
This Pedestal Crane Inspector program provides the knowledge and skills to perform a comprehensiv
inspecon and is specically designed for persons who inspect, test, and report on the condion o
these oshore cranes. Course compliance basis includes API standards and regulaons.
Yours Free with AendanceCrane Inspector’s tool kit which includes: Steel calipers, Depth scale, Sheave groove gauge,Magnec pickup, Screwdriver, Pocket magnier, Calculator, Flashlight, Pocket notebook,Wire rope breaking chart wallet card, Rigger’s inspecon wallet card, Belt pack
Refresher Training Available For all Programs
Course Locaons & Dates3 day ... ........Course 3611..........$1,195
Lafayee, LA....................April 23 - 25
Lafayee, LA..............November 5 - 7
PPE listed on page 3 is required
for this training.
3 r d F ree
To Enroll Call 800.521.76
8
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 19/20
8/11/2019 2014 Training Schedule.pdf
http://slidepdf.com/reader/full/2014-training-schedulepdf 20/20
Safety through Education
Est. 1977
®
Safety through Education
Crane Tech, LLC and its employees are committed to achieving excellence and maintaining o
position of leadership in the material handling training and consulting eld. We honor our custome
with superior service and dedicate ourselves to providing an unmatched level of expertise.
We help companies build the skill and condence necessary not just to perform when it is easy; b
to perform at a high level under the most changing and complex conditions.
The Most Trusted Name in Material Handling
Safety Training and Inspection Services
1977 - 2014
Thanks to the thousands of companies and organizations who put their trust in our hands, an
who have allowed Crane Tech to reach our thirty-seven year mark.
Pride In Our Service