© 2006 Honda Motor Co., Ltd.owners.honda.com/assets/OWNERLINK/Model/own_man/... · CITY STATE/PROVINCE ZIP CODE/ ... Your selection of a 2006 Honda Element was a wise ... significantly

2006 ElementOwner’s Manual

(Unlinked)

This document does not contain hyperlinks and may be formatted for printing instead of web use. This is due to changes in content and specifications of the vehicle that happen throughout the model year. This manual will be replaced with a hyperlinked version at the end of the model year.© 2006 Honda Motor Co., Ltd. P/N 31SCV630

This owner’s manual covers allmodels of the Element. You may finddescriptions of equipment andfeatures that are not on yourparticular model.

The information and specificationsincluded in this publication were ineffect at the time of approval forprinting. Honda Motor Co., Ltd.reserves the right, however, todiscontinue or change specificationsor design at any time without noticeand without incurring any obligationwhatsoever.

This owner’s manual should beconsidered a permanent part of thevehicle and should remain with thevehicle when it is sold.

Owner’s Identif ication

OWNER

ADDRESS

V. I. N.

DELIVERY DATE

DEALER NAME DEALER NO.

ADDRESS

OWNER’S SIGNATURE

DEALER’S SIGNATURE

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

(Date sold to original retail purchaser)

STREET

CITY STATE/PROVINCE ZIP CODE/POSTAL CODE

０５／０９／１３　１９：４０：１４　３１ＳＣＶ６３０　０００１　

California Proposition 65 Warning

This product containsor emits chemicals known to thestate of California to cause cancerand birth defects or otherreproductive harm.

Event Data Recorders

This vehicle is equipped with one ormore recording devices commonlyreferred to as event data recordersor sensing and diagnostic modules.

One of the best ways to enhance the enjoyment of your new vehicle is toread this manual. In it, you will learn how to operate its driving controls andconvenience items. Afterwards, keep this owner’s manual in your vehicle soyou can refer to it at any time.

Several warranties protect your new vehicle. Read the warranty bookletthoroughly so you understand the coverages and are aware of your rightsand responsibilities.

Maintaining your vehicle according to the schedules given in this manualhelps to keep your driving trouble-free while it preserves your investment.When your vehicle needs maintenance, keep in mind that your dealer’s staffis specially trained in servicing the many systems unique to your vehicle.Your dealer is dedicated to your satisfaction and will be pleased to answerany questions and concerns.

As you read this manual, you willfind information that is preceded bya symbol. Thisinformation is intended to help youavoid damage to your vehicle, otherproperty, or the environment.

Congratulations! Your selection of a 2006 Honda Element was a wiseinvestment. It will give you years of driving pleasure.

Introduction

WARNING:

i

０５／０９／１３　１９：４０：２１　３１ＳＣＶ６３０　０００２　

－－

－

－－

－

Your safety, and the safety of others,is very important. And operating thisvehicle safely is an importantresponsibility.

To help you make informeddecisions about safety, we haveprovided operating procedures andother information on labels and inthis manual. This information alertsyou to potential hazards that couldhurt you or others.

Of course, it is not practical orpossible to warn you about all thehazards associated with operating ormaintaining your vehicle. You mustuse your own good judgement.

You will find this important safety information in a variety of forms,including:

on the vehicle.preceded by a safety alert symbol and one of

three signal words: , , or .

such as Important Safety Reminders or ImportantSafety Precautions.

such as Driver and Passenger Safety.how to use this vehicle correctly and safely.

This entire book is filled with important safety information please read itcarefully.

These signal words mean:

A Few Words About Safety

Safety LabelsSafety Messages

Safety Headings

Safety SectionInstructions

DANGER WARNING CAUTION

ii

You WILL be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLYHURT if you don’t follow instructions.

You CAN be HURT if you don’t followinstructions.

０５／０９／１３　１９：４０：３０　３１ＳＣＶ６３０　０００３　

Your Element has higher ground clearance than a passenger vehicle designed for use only on pavement. Higherground clearance has many advantages for off-highway driving. It allows you to travel over bumps, obstacles, andrough terrain. It also provides good visibility so you can anticipate problems earlier.

These advantages come at some cost. Because your vehicle is taller and rides higher off the ground, it has a highcenter of gravity. This means your vehicle can tip or roll over if you make abrupt turns. Utility vehicles have asignificantly higher rollover rate than other types of vehicles. In a rollover crash, an unbelted person is significantlymore likely to die than a person wearing a seat belt. As a reminder, make sure you and your passengers always wearseat belts.

For information on how to reduce the risk of rollover, read ‘‘Driving Guidelines’’ on page of this manual and thesection on page . Failure to operate your vehicle correctly might result in loss of

control or an accident.

138157Off-Highway Driving Guidelines

Important Handling Information

iii

０５／０９／１３　１９：４０：３５　３１ＳＣＶ６３０　０００４　

０５／０９／１３　１９：４０：３７　３１ＳＣＶ６３０　０００５　

(fluid capacities and tire pressures)

(main controls)

(seat belts, SRS, and child protection)

(indicators, gauges, dashboard, and steering column)

(heating and cooling, audio, steering wheel, and cruise control)

(schedules, fluid checking, minor services, and vehicle storage)

(flat tire, dead battery, overheating, and fuses)

(vehicle specifications, tires, fuel, and emissions controls)

(warranty and contact information)

(how to order)

(fuel, vehicle break-in, and cargo loading)

(engine and transmission operation)

Contents

................................................................................................................................................Index . I

..................................................Service Information Summary . last page

...............................................................................................Your Vehicle at a Glance . 4

............................................................Driver and Passenger Safety . 7

..........................................Instruments and Controls . 51

.....................................................Features . 89

.............................................Maintenance . 161

.........................................Taking Care of the Unexpected . 195

.......................................Technical Information . 219

..................Warranty and Customer Relations (U.S. and Canada only) . 233

..................................................................................Authorized Manuals (U.S. only) . 237

.......................................................................Before Driving . 123

.........................................................................................Driving . 137

IND

EX

1

０５／０９／１３　１９：４０：４６　３１ＳＣＶ６３０　０００６　

2

０５／０９／１３　１９：４０：４８　３１ＳＣＶ６３０　０００７　

How to operate the heating and airconditioning system, the audiosystem, and other convenience

features.A convenient reference to thesections in this manual.

A quick reference to the maincontrols in your vehicle.

Explains the purpose of eachinstrument panel indicator and gauge,and how to use the controls on thedashboard and steering column.

ID numbers, dimensions, capacities,and technical information.

How to order manuals and othertechnical literature.

A summary of the information youneed when you pull up to the fuelpump.

What gasoline to use, how to break-in your new vehicle, and how to loadluggage and other cargo.

This section covers several problemsmotorists sometimes experience,and details how to handle them.

The proper way to start the engine,shift the transmission, and park; pluswhat you need to know if you’replanning to tow a trailer.

Important information about theproper use and care of your vehicle’sseat belts, an overview of thesupplemental restraint system, andvaluable information on how toprotect children with child restraints. The maintenance schedule shows

you when you need to take yourvehicle to the dealer. There is also alist of things to check andinstructions on how to check them.

A summary of the warrantiescovering your new vehicle, and howto contact us for any reason. Refer toyour warranty manual for detailedinformation.

Overview of Contents

Contents

Your Vehicle at a Glance

Driver and Passenger Safety

Instruments and Controls

Features

Technical Information

Warranty and CustomerRelations(U.S. and Canada only)

Authorized Manuals(U.S. only)

Index

Service Information Summary

Before Driving

Taking Care of the Unexpected

Maintenance

Driving

3

０５／０９／１３　１９：４１：０４　３１ＳＣＶ６３０　０００８　


4

POWER DOORLOCK SWITCH

MIRROR CONTROLSGAUGES

POWER WINDOWSWITCHES

A/T model is shown.

HOOD RELEASEHANDLE

INSTRUMENT PANEL

HEATING/COOLINGCONTROLS

PARKING BRAKE

(P.70)

(P.81)

(P.82) (P.58)

(P.90)

(P.83)

AUTOMATIC TRANSMISSIONMANUAL TRANSMISSION

(P.53) AIRBAGS(P.11, 23)

(P.139)(P.143)

(P.127)

０５／０９／１３　１９：４１：１０　３１ＳＣＶ６３０　０００９　

＊

＊

To use the horn, press the center pad of the steering wheel.:


Your

Vehicle

ataG

lance

5

HEADLIGHTS/TURN SIGNALS

REAR WINDOWDEFOGGER

A/T model is shown.

HORNHAZARD WARNINGBUTTON

STEERING WHEEL ADJUSTMENT

AUDIO SYSTEMWINDSHIELD WIPERS/WASHERS

DIGITAL CLOCK

(P.64)

(P.63)

(P.63)

(P.94)(P.61)(P.62)

(P.117)

CRUISE CONTROL BUTTONS

CRUISE CONTROLMASTER BUTTON

(P.120)

(P.120)

０５／０９／１３　１９：４１：１６　３１ＳＣＶ６３０　００１０　

6

０５／０９／１３　１９：４１：１８　３１ＳＣＶ６３０　００１１　

－

This section gives you importantinformation about how to protectyourself and your passengers. Itshows you how to use seat belts. Itexplains how your airbags work. Andit tells you how to properly restraininfants and children in your vehicle.

.........Important Safety Precautions . 8.......Your Vehicle’s Safety Features . 9

.....................................Seat Belts . 10.........................................Airbags . 11

.........Protecting Adults and Teens . 12.....1. Close and Lock the Doors . 12

...........2. Adjust the Front Seats . 12............3. Adjust the Seat-Backs . 14

...4. Adjust the Head Restraints . 155. Fasten and Position the

............................Seat Belts . 156. Maintain a Proper Sitting

................................Position . 17.....Advice for Pregnant Women . 18...Additional Safety Precautions . 19

Additional Information About Your.................................Seat Belts . 20

..Seat Belt System Components . 20......................Lap/Shoulder Belt . 20

Automatic Seat Belt...............................Tensioners . 21

...............Seat Belt Maintenance . 21Additional Information About Your

.....................................Airbags . 23......Airbag System Components . 23

How Your Front Airbags.........................................Work . 24

...How Your Side Airbags Work . 26How the SRS Indicator

.......................................Works . 27How the Side Airbag Off

......................Indicator Works . 28.............................Airbag Service . 28

...Additional Safety Precautions . 29Protecting Children General

................................Guidelines . 30All Children Must Be

...............................Restrained . 30All Children Should Sit in a

.................................Back Seat . 31

The Passenger’s Front Airbag...............Poses Serious Risks . 31

If You Must Drive with Several...................................Children . 33

If a Child Requires Close..................................Attention . 33

...Additional Safety Precautions . 34Protecting Infants and

.........................Small Children . 35.......................Protecting Infants . 35

.........Protecting Small Children . 36.....................Selecting a Child Seat . 37....................Installing a Child Seat . 38

...............................With LATCH . 39.........With a Lap/Shoulder Belt . 41

..............................With a Tether . 43...........Protecting Larger Children . 44

...............Checking Seat Belt Fit . 44..................Using a Booster Seat . 45

When Can a Larger Child Sit in.........................................Front . 45

...Additional Safety Precautions . 46.............Carbon Monoxide Hazard . 47

...................................Safety Labels . 48

Driver and Passenger Safety

Driver

andP

assengerSafety

7

０５／０９／１３　１９：４１：２２　３１ＳＣＶ６３０　００１２　

－

You’ll find many safetyrecommendations throughout thissection, and throughout this manual.The recommendations on this pageare the ones we consider to be themost important.

A seat belt is your best protection inall types of collisions. Airbags aredesigned to supplement seat belts,not replace them. So even thoughyour vehicle is equipped with airbags,make sure you and your passengersalways wear your seat belts, andwear them properly (see page ).

Having a tire blowout or amechanical failure can be extremelyhazardous. To reduce the possibilityof such problems, check your tirepressures and condition frequently,and perform all regularly scheduledmaintenance (see page ).

Excessive speed is a major factor incrash injuries and deaths. Generally,the higher the speed, the greater therisk, but serious injuries can alsooccur at lower speeds. Never drivefaster than is safe for currentconditions, regardless of themaximum speed posted.

Alcohol and driving don’t mix. Evenone drink can reduce your ability torespond to changing conditions, andyour reaction time gets worse with

every additional drink. So don’t drinkand drive, and don’t let your friendsdrink and drive, either.

While airbags can save lives, theycan cause serious or fatal injuries tooccupants who sit too close to them,or are not properly restrained.Infants, young children, and shortadults are at the greatest risk. Besure to follow all instructions andwarnings in this manual.

Children age 12 and under shouldride properly restrained in a backseat. Infants and small childrenshould be restrained in a child seat.Larger children should use a boosterseat and a lap/shoulder belt untilthey can use the belt properlywithout a booster (see pages

).

15

163

4630

Important Safety Precautions

Always Wear Your Seat Belt

Keep Your Vehicle in SafeCondition

Control Your Speed

Don’t Drink and Drive

Be Aware of Airbag Hazards

Restrain All Children

8

０５／０９／１３　１９：４１：３２　３１ＳＣＶ６３０　００１３　

Your vehicle is equipped with manyfeatures that work together toprotect you and your passengersduring a crash.

Some features do not require anyaction on your part. These include astrong steel framework that forms asafety cage around the passengercompartment; front and rear crushzones; a collapsible steering column;and tensioners that tighten the frontseat belts in a crash.

However, you and your passengerscan’t take full advantage of thesefeatures unless you remain sitting ina proper position and

. In fact, some safetyfeatures can contribute to injuries ifthey are not used properly.

The following pages explain how youcan take an active role in protectingyourself and your passengers.

Your Vehicle’s Safety Features

always wearyour seat belts

Driver

andP

assengerSafety

9

(9)(2)

(6)

(4)(3)

(1)

(7)

(5)

(2)

(10) (8)

(8)

(1) Safety Cage(2) Crush Zones(3) Seats and Seat-Backs(4) Head Restraints(5) Collapsible Steering Column(6) Seat Belts(7) Front Airbags(8) Side Airbags

(standard on EX model)(9) Front Seat Belt Tensioners(10) Door Locks

０５／０９／１３　１９：４１：３８　３１ＳＣＶ６３０　００１４　

Your vehicle is equipped with seatbelts in all seating positions.

Your seat belt system also includesan indicator on the instrument panelto remind you and your passengersto fasten your seat belts.

Seat belts are the single mosteffective safety device for adults andlarger children. (Infants and smallerchildren must be properly restrainedin child seats.)

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your vehicle has airbags.

In addition, most states and allCanadian provinces require you towear seat belts.

When properly worn, seat belts:

Keep you connected to the vehicleso you can take advantage of thevehicle’s built-in safety features.

Help protect you in almost everytype of crash, including frontal,side, and rear impacts androllovers.

Help keep you from being thrownagainst the inside of the vehicleand against other occupants.

Keep you from being thrown outof the vehicle.

Help keep you in a good positionshould the airbags ever deploy. Agood position reduces the risk ofinjury from an inflating airbag andallows you to get the bestadvantage from the airbag.

Of course, seat belts cannotcompletely protect you in everycrash. But in most cases, seat beltscan reduce your risk of seriousinjury.

Always wear your seat belt, andmake sure you wear it properly.


Seat Belts

Why Wear Seat Belts

What You Should Do:

10

Not wearing a seat belt properlyincreases the chance of seriousinjury or death in a crash, eventhough your vehicle has airbags.

Be sure you and yourpassengers always wear seatbelts and wear them properly.

０５／０９／１３　１９：４１：４９　３１ＳＣＶ６３０　００１５　

The most important things you needto know about your airbags are:

Your vehicle has side airbags to helpprotect the upper torso of the driveror a front seat passenger during amoderate to severe side impact (seepage for more information on howyour side airbags work).

Always wearyour seat belt properly, and situpright and as far back from thesteering wheel as possible whileallowing full control of the vehicle. Afront passenger should move theirseat as far back from the dashboardas possible.

To dotheir job, airbags must inflate withtremendous force. So whileairbags help save lives, they cancause minor injuries or moreserious or even fatal injuries ifoccupants are not properlyrestrained or sitting properly.

They are designed to supplementthe seat belts.

Your vehicle has a supplementalrestraint system (SRS) with frontairbags to help protect the heads andchests of the driver and a front seatpassenger during a moderate tosevere frontal collision (see page

for more information on howyour front airbags work).24

26

Standard on EX models

Airbags


What you should do:

Airbags can pose hazards.

Airbags offer no protection in rearimpacts, or minor frontal or sidecollisions.

Airbags do not replace seat belts. Driver

andP

assengerSafety

11

０５／０９／１３　１９：４１：５７　３１ＳＣＶ６３０　００１６　

－

The rest of this section gives moredetailed information about how youcan maximize your safety.

After everyone has entered thevehicle, be sure the doors are closedand locked.

Adjust the driver’s seat as far to therear as possible while allowing you tomaintain full control of the vehicle.Have a front passenger adjust theirseat as far to the rear as possible.

If you sit too close to the steeringwheel or dashboard, you can beseriously injured by an inflating frontairbag, or by striking the steeringwheel or dashboard.

See pages for importantguidelines on how to properlyprotect infants, small children, andlarger children who ride in yourvehicle.

The following pages provideinstructions on how to properlyprotect the driver, adult passengers,and teenage children who are largeenough and mature enough to driveor ride in the front.

See page for how to lock thedoors, and page for how the doormonitor indicator works.

Locking the doors also helps preventan outsider from unexpectedlyopening a door when you come to astop.

Your vehiclehas a door

monitor indicator on the instrumentpanel to indicate when a specificdoor or the tailgate or the hatch isnot tightly closed.

Locking the doors reduces thechance of someone being thrown outof the vehicle during a crash and ithelps prevent passengers fromaccidentally opening and falling out.

Remember, however, that no safetysystem can prevent all injuries ordeaths that can occur in a severecrash, even when seat belts areproperly worn and the airbags deploy.

30 46

7057

Close and Lock the Doors Adjust the Front Seats

Introduction

1. 2.

Protecting Adults and Teens

12

０５／０９／１３　１９：４２：０８　３１ＳＣＶ６３０　００１７　

The National Highway Traffic SafetyAdministration and TransportCanada recommend that driversallow at least 10 inches (25 cm)between the center of the steeringwheel and the chest.

If you cannot get far enough awayfrom the steering wheel and stillreach the controls, we recommendthat you investigate whether sometype of adaptive equipment may help.

See page for how to adjust thefront seats.

73


Driver

andP

assengerSafety

13

Sitting too close to a frontairbag can result in seriousinjury or death if the frontairbags inflate.

Always sit as far back from thefront airbags as possible.

０５／０９／１３　１９：４２：１３　３１ＳＣＶ６３０　００１８　

Adjust the driver’s seat-back to acomfortable, upright position,leaving ample space between yourchest and the airbag cover in thecenter of the steering wheel.

Passengers with adjustable seat-backs should also adjust their seat-back to a comfortable, uprightposition.

Reclining a seat-back so that theshoulder part of the belt no longerrests against the occupant’s chestreduces the protective capability ofthe belt. It also increases the chanceof sliding under the belt in a crashand being seriously injured. Thefarther a seat-back is reclined, thegreater the risk of injury.

See page for how to adjust theseat-backs.

73

Adjust the Seat-Backs3.


14

Reclining the seat-back too farcan result in serious injury ordeath in a crash.

Adjust the seat-back to anupright position, and sit wellback in the seat.

０５／０９／１３　１９：４２：１９　３１ＳＣＶ６３０　００１９　

Adjust the driver’s head restraint sothe back of your head rests againstthe center of the restraint.

Have passengers with adjustablehead restraints adjust their restraintsproperly as well. Taller personsshould adjust their restraint as highas possible.

Properly adjusted head restraintswill help protect occupants fromwhiplash and other crash injuries.

See page for how to adjust thehead restraints.

Insert the latch plate into the buckle,then tug on the belt to make sure thebelt is securely latched. Also checkthat the belt is not twisted, because atwisted belt can cause seriousinjuries in a crash.

75

CONTINUED

Adjust the Head Restraints Fasten and Position the SeatBelts

4. 5.


Driver

andP

assengerSafety

15

Improperly positioning headrestraints reduces theireffectiveness and you can beseriously injured in a crash.

Make sure head restraints arein place and positioned properlybefore driving.

０５／０９／１３　１９：４２：２７　３１ＳＣＶ６３０　００２０　

Position the lap part of the belt aslow as possible across your hips,then pull up on the shoulder part ofthe belt so the lap part fits snugly.This lets your strong pelvic bonestake the force of a crash and reducesthe chance of internal injuries.

The front seats have adjustable seatbelt anchors. To adjust the height ofan anchor, press and hold the releasebuttons, and slide the anchor up ordown as needed (it has fourpositions).

If necessary, pull up on the belt againto remove any slack, then check thatthe belt rests across the center ofyour chest and over your shoulder.This spreads the forces of a crashover the strongest bones in yourupper body.

If the seat belt touches or crossesyour neck, or if it crosses your arminstead of your shoulder, you need toadjust the seat belt anchor height.


16

RELEASEBUTTONS

Improperly positioning the seatbelts can cause serious injuryor death in a crash.

Make sure all seat belts areproperly positioned beforedriving.

０５／０９／１３　１９：４２：３４　３１ＳＣＶ６３０　００２１　

If a seat belt does not seem to workproperly, it may not protect theoccupant in a crash.

This could causevery serious injuries in a crash.

After all occupants have adjustedtheir seats and put on seat belts, it isvery important that they continue tosit upright, well back in their seats,with their feet on the floor, until thevehicle is parked and the engine isoff.

Sitting improperly can increase thechance of injury during a crash. Forexample, if an occupant slouches,lies down, turns sideways, sitsforward, leans forward or sideways,or puts one or both feet up, thechance of injury during a crash isgreatly increased.

See page for additionalinformation about your seat beltsand how to take care of them.

Using a seatbelt that is not working properly canresult in serious injury or death.Have your dealer check the belt assoon as possible.

20

CONTINUED

Never place the shoulder portion of alap/shoulder belt under your arm orbehind your back.

No one should sit in a seat with aninoperative seat belt.

Maintain a Proper SittingPosition

6.


Driver

andP

assengerSafety

17

０５／０９／１３　１９：４２：４０　３１ＳＣＶ６３０　００２２　

If you are pregnant, the best way toprotect yourself and your unbornchild when driving or riding in avehicle is to always wear a seat belt,and keep the lap part of the belt aslow as possible across the hips.

When driving, remember to situpright and adjust the seat as farback as possible while allowing fullcontrol of the vehicle. When ridingas a front passenger, adjust the seatas far back as possible.

This will reduce the risk of injuriesto both you and your unborn childthat can be caused by a crash or aninflating front airbag.

Each time you have a checkup, askyour doctor if it’s okay for you todrive.

In addition, an occupant who is out ofposition in the front seat can beseriously or fatally injured in a crashby striking interior parts of thevehicle or being struck by aninflating front airbag.

Advice for Pregnant Women


18

Sitting improperly or out ofposition can result in seriousinjury or death in a crash.

Always sit upright, well back inthe seat, with your feet on thefloor.

０５／０９／１３　１９：４２：４７　３１ＳＣＶ６３０　００２３　

Devices intended to improveoccupant comfort or reposition theshoulder part of a seat belt canseverely compromise theprotective capability of the seatbelt and increase the chance ofserious injury in a crash.

Carrying hard or sharpobjects on your lap, or driving witha pipe or other sharp object inyour mouth, can result in injuriesif your front airbag inflates.

If they do, theycould be very seriously injured in acrash.

A passenger who is notwearing a seat belt during a crashor emergency stop can be thrownagainst the inside of the vehicle,against other occupants, or out ofthe vehicle.


Objects onthe covers marked ‘‘SRS AIRBAG’’could interfere with the properoperation of the airbags or bepropelled inside the vehicle andhurt someone if the airbags inflate.

If a side airbaginflates, a cup holder or other hardobject attached on or near thedoor could be propelled inside thevehicle and hurt someone.

If yourhands or arms are close to anairbag cover, they could be injuredif the front airbag inflates.

Additional Safety Precautions Do not put any accessories on seatbelts.

Do not place hard or sharp objectsbetween yourself and a frontairbag.

Never let passengers ride in thecargo area or on top of a folded-down back seat.

Passengers should not stand up orchange seats while the vehicle ismoving.

Two people should never use thesame seat belt.

Do not attach or place objects onthe front airbag covers.

On models with side airbags, donot attach hard objects on or neara front door.

Keep your hands and arms awayfrom the airbag covers.


Driver

andP

assengerSafety

19

０５／０９／１３　１９：４２：５５　３１ＳＣＶ６３０　００２４　

The seat belt systemincludes an indicator on the

instrument panel and a beeper toremind you to fasten your seat belt.

To fasten the belt, insert the latchplate into the buckle, then tug on thebelt to make sure the buckle islatched (see page for how toproperly position the belt).

To unlock the belt, press the redPRESS button on the buckle. Guidethe belt across your body so that itretracts completely. After exiting thevehicle, be sure the belt is out of theway and will not get closed in thedoor.

All seat belts have an emergencylocking retractor. In normal driving,the retractor lets you move freely inyour seat while it keeps sometension on the belt. During a collisionor sudden stop, the retractorautomatically locks the belt to help

restrain your body.

The seat belts in all positions exceptthe driver’s have an additionallocking mechanism that must beactivated to secure a child seat (seepage ).

If the shoulder part of the belt ispulled all the way out, the lockingmechanism will activate. The beltwill retract, but it will not allow thepassenger to move freely.

To deactivate the lockingmechanism, unlatch the buckle andlet the seat belt fully retract. Torefasten the seat belt, pull it out onlyas far as needed.

If you continue driving withoutfastening your seat belt, the beeperwill sound and the indicator will flashagain at regular intervals.

The lap/shoulder belt goes overyour shoulder, across your chest,and across your hips.

Your seat belt system includes lap/shoulder belts in all four seatingpositions. The front seat belts arealso equipped with automatic seatbelt tensioners.

If you turn the ignition switch to theON (II) position before fasteningyour seat belt, the beeper will sound,and the indicator will flash. If you donot fasten your seat belt before thebeeper stops, the indicator will stopflashing but remains on.

15

41

Additional Information About Your Seat Belts

Seat Belt System Components Lap/Shoulder Belt

20

０５／０９／１３　１９：４３：０４　３１ＳＣＶ６３０　００２５　

CONTINUED

For added protection, the front seatbelts are equipped with automaticseat belt tensioners. When activated,the tensioners immediately tightenthe belts to help hold the driver anda front passenger in place.

For safety, you should check thecondition of your seat belts regularly.

Pull each belt out fully, and look forfrays, cuts, burns, and wear. Checkthat the latches work smoothly andthe belts retract easily. If a belt doesnot retract easily, cleaning the beltmay correct the problem (see page

). Any belt that is not in goodcondition or working properly willnot provide good protection andshould be replaced as soon aspossible.

Honda provides a lifetime warrantyon seat belts for U.S. models. Seeyourbooklet for details.

The tensioners are designed toactivate in any collision severeenough to cause front airbaginflation.

The tensioners can also be activatedduring a collision in which the frontairbags . In this case, theairbags would not be needed, but theadditional restraint could be helpful.

When the tensioners are activated,the seat belts will remain tight untilthey are unbuckled in the normalmanner.

If the front seat belt tensioners everactivate, they must be replaced asthe belts will no longer retractproperly.

185

Honda Warranty Information

do not deploy


Seat Belt MaintenanceAutomatic Seat Belt TensionersD

riverand

Passenger

Safety

21

０５／０９／１３　１９：４３：１３　３１ＳＣＶ６３０　００２６　

If a seat belt is worn during a crash,it must be replaced by the dealer. Abelt that has been worn during acrash may not provide the same levelof protection in a subsequent crash.

The dealer should also inspect theanchors for damage and replacethem if needed. If the automatic seatbelt tensioners activate during acrash, they must be replaced.


22

Not checking or maintainingseat belts can result in seriousinjury or death if the seat beltsdo not work properly whenneeded.

Check your seat belts regularlyand have any problemcorrected as soon as possible.

０５／０９／１３　１９：４３：１７　３１ＳＣＶ６３０　００２７　

Your airbag system includes:

Two SRS (supplemental restraintsystem) front airbags. The driver’sairbag is stored in the center ofthe steering wheel; the frontpassenger’s airbag is stored in thedashboard. Both are marked ‘‘SRSAIRBAG’’ (see page ).

On models equipped with two sideairbags, one for the driver and onefor a front passenger. The airbagsare stored in the outer edges ofthe seat-backs. Both are marked‘‘SIDE AIRBAG’’ (see page ).

On models equipped with sideairbags, an indicator on thedashboard that alerts you that thepassenger’s side airbag has beenturned off (see page ).

Emergency backup power in caseyour vehicle’s electrical system isdisconnected in a crash.

Automatic seat belt tensioners(see page ).

Sensors that can detect amoderate to severe front impact,or side impact in models with sideairbags.

On models with side airbags,sensors that can detect whethera child is in the passenger’s sideairbag path and automaticallyturn the airbag off (see page

).

A sophisticated electronic systemthat continually monitors andrecords information about thesensors, the control unit, theairbag activators, the seat belttensioners, and driver and frontpassenger seat belt use when theignition switch is in the ON (II)position.

An indicator on the instrumentpanel that alerts you to a possibleproblem with your airbags,sensors, or seat belt tensioners(see page ).

26

24

28

21

26

27

Airbag System Components

Additional Information About Your Airbags

Driver

andP

assengerSafety

23

０５／０９／１３　１９：４３：２５　３１ＳＣＶ６３０　００２８　

After inflating, the front airbagsimmediately deflate, so they won’tinterfere with the driver’s visibility,or the ability to steer or operateother controls.

Although both airbags normallyinflate within a split second of eachother, it is possible for only oneairbag to deploy.

This can happen if the severity of acollision is at the margin, orthreshold, that determines whetheror not the airbags will deploy. Insuch cases, the seat belt will providesufficient protection, and thesupplemental protection offered bythe airbag would be minimal.

If you ever have a moderate tosevere frontal collision, sensors willdetect the vehicle’s rapiddeceleration.

If the rate of deceleration is highenough, the control unit will instantlyinflate the driver’s and frontpassenger’s airbags, at the time andwith the force needed.

During a frontal crash, your seat beltrestrains your lower body and torso,and the front airbag helps protectyour head and chest.


How Your Front Airbags Work

24

０５／０９／１３　１９：４３：３２　３１ＳＣＶ６３０　００２９　

Your front airbags are also dual-threshold airbags. Airbags with thisfeature have two deploymentthresholds that depend on whetheror not the occupant is wearing a seatbelt.

Your front airbags are dual-stageairbags. This means they have twoinflation stages that can be ignitedsequentially or simultaneously,depending on crash severity.

In a crash, both stageswill ignite simultaneously to providethe quickest and greatest protection.

In a crash, one stage willignite first, then the second stagewill ignite a split second later. Thisprovides longer airbag inflation timewith a little less force.

The total time for inflation anddeflation is one-tenth of a second, sofast that most occupants are notaware that the airbags deployed untilthey see them lying in their laps.

After a crash, you may see whatlooks like smoke. This is actuallypowder from the airbag’s surface.Although the powder is not harmful,people with respiratory problemsmay experience some temporarydiscomfort. If this occurs, get out ofthe vehicle as soon as it is safe to doso.

If the occupant’s belt is ,the airbag will deploy at a slightlylower threshold, because theoccupant would need extraprotection.

If the occupant’s belt is , theairbag will deploy at a slightly higherthreshold, when the airbag would beneeded to supplement the protectionprovided by the seat belt.


Dual-Threshold AirbagsDual-Stage Airbags

more severe

less severe

not latched

latched

Driver

andP

assengerSafety

25

０５／０９／１３　１９：４３：４０　３１ＳＣＶ６３０　００３０　

Only one airbag will deploy during aside impact. If the impact is on thepassenger’s side, the passenger’sside airbag will deploy even if thereis no passenger.

To get the best protection from theside airbags, front seat occupantsshould wear their seat belts and situpright and well back in their seats.

If you ever have a moderate tosevere side impact, sensors willdetect rapid deceleration and signalthe control unit to instantly inflateeither the driver’s or the passenger’sside airbag.

Your vehicle has a side airbag cutoffsystem designed primarily to protecta child riding in the front passenger’sseat.

Although Honda does not encouragechildren to ride in front, if thesensors in the seat detect a child hasleaned into the side airbag’sdeployment path, the airbag will shutoff.

The side airbag may also shut off if ashort adult leans sideways, or alarger adult slouches and leanssideways into the airbag’sdeployment path.

Objects placed on the frontpassenger seat can also cause the

side airbag to be shut off.

A front seat passenger should notuse a cushion or other object as abackrest. It may prevent the cutoffsystem from working properly.

There will be some delay betweenthe moment the passenger movesinto or out of the airbag deploymentpath and when the indicator comeson or goes off.

If the side airbag off indicator comeson (see page ), have thepassenger sit upright. Once thepassenger is out of the airbag’sdeployment path, the system willturn the airbag back on, and theindicator will go out.

28

Standard on EX modelsHow Your Side Airbags Work


Side Airbag Cutoff System

26

０５／０９／１３　１９：４３：４９　３１ＳＣＶ６３０　００３１　

If the indicator comes on at anyother time, or does not come on at all,you should have the system checkedby your dealer. For example:

If the SRS indicator does not comeon after you turn the ignitionswitch to the ON (II) position.

If the indicator stays on after theengine starts.

If the indicator comes on orflashes on and off while you drive.

If you see any of these indications,the airbags and seat belt tensionersmay not work properly when youneed them.

The SRS indicator alertsyou to a potential problem

with your airbags or seat belttensioners.

When you turn the ignition switch tothe ON (II) position, this indicatorcomes on briefly then goes off. Thistells you the system is workingproperly.


How the SRS Indicator WorksD

riverand

Passenger

Safety

27

Ignoring the SRS indicator canresult in serious injury or deathif the airbag systems ortensioners do not work properly.

Have your vehicle checked by adealer as soon as possible ifthe SRS indicator alerts you toa possible problem.

０５／０９／１３　１９：４３：５６　３１ＳＣＶ６３０　００３２　

Your airbag systems are virtuallymaintenance free, and there are noparts you can safely service.However, you must have yourvehicle serviced if:

Any airbagthat has deployed must bereplaced along with the controlunit and other related parts. If afront airbag inflates, the seat belttensioners must also be replaced.Do not try to remove or replaceany airbag by yourself. This mustbe done by a dealer or aknowledgeable body shop.

Take your vehicle to anauthorized dealer as soon aspossible. If you ignore thisindication, your airbags may notoperate properly.

When you turn the ignition switch tothe ON (II) position, the indicatorshould come on briefly and go off(see page ). If it doesn’t come on,stays on, or comes on while drivingwithout a passenger in the front seat,have the system checked.

This indicator alerts you that thepassenger’s side airbag has beenautomatically shut off. It doesmean there is a problem with yourside airbags.

55

Standard on U.S. EX models andCanadian Y package


Airbag ServiceHow the Side Airbag OffIndicator Works

An airbag ever inflates.

The SRS indicator alerts you to aproblem.

not

28

U.S. Canada

０５／０９／１３　１９：４４：０４　３１ＳＣＶ６３０　００３３　

Together, airbags andseat belts provide the bestprotection.

Improperly replacingor covering front seat-back coverscan prevent your side airbags frominflating during a side impact.

Tampering could causethe airbags to deploy, possiblycausing very serious injury.

If water or another liquidsoaks into a seat-back, it canprevent the side airbag cutoffsystem from working properly.

Models with side airbags:Additional Safety PrecautionsDo not attempt to deactivate yourairbags.

Do not cover or replace front seat-back covers without consultingyour dealer.

Do not tamper with airbagcomponents or wiring for anyreason.

Do not expose the front seat-backsto liquid.


Driver

andP

assengerSafety

29

０５／０９／１３　１９：４４：０９　３１ＳＣＶ６３０　００３４　

－

－－

If you have children, or ever need todrive with a child in your vehicle, besure to read this section. It beginswith important general guidelines,then presents special information forinfants, small children, and largerchildren.

Each year, many children are injuredor killed in vehicle crashes becausethey are either unrestrained or notproperly restrained. In fact, vehicleaccidents are the number one causeof the death of children ages 12 andunder.

To reduce the number of childdeaths and injuries, every state andCanadian province requires thatinfants and children be properlyrestrained when they ride in avehicle.

(see pages ).(see pages ).

Children depend on adults to protectthem. However, despite their bestintentions, many adults do not knowhow to properly protect childpassengers.

464435 43

Protecting Children General Guidelines

All Children Must Be Restrained

Infants and small children must berestrained in an approved child seatthat is properly secured to thevehicle

Larger children must be restrainedwith a lap/shoulder belt and ride ona booster seat until the seat belt f itsthem properly

30

Children who are unrestrainedor improperly restrained can beseriously injured or killed in acrash.

Any child too small for a seatbelt should be properlyrestrained in a child seat. Alarger child should be properlyrestrained with a seat belt anduse a booster seat if necessary.

０５／０９／１３　１９：４４：１８　３１ＳＣＶ６３０　００３５　

－

Front airbags have been designed tohelp protect adults in a moderate tosevere frontal collision. To do this,the passenger’s front airbag is quitelarge, and it can inflate with enoughforce to cause very serious injuries.

If the vehicle seat istoo far forward, or the child’s head isthrown forward during a collision, aninflating front airbag can strike thechild with enough force to kill orvery seriously injure a small child.

Whenever possible,larger children should sit in the backseat, on a booster seat if needed, andbe properly restrained with a seatbelt (see page for importantinformation about protecting largerchildren).

According to accident statistics,children of all ages and sizes aresafer when they are restrained in aback seat. The National HighwayTraffic Safety Administration andTransport Canada recommend thatall children age 12 and under beproperly restrained in a back seat.

Ifthe airbag inflates, it can hit the backof the child seat with enough forceto kill or very seriously injure aninfant.

Some states have laws restrictingwhere children may ride.

Children who ride in back are lesslikely to be injured by strikinginterior vehicle parts during acollision or hard braking. Also,children cannot be injured by aninflating front airbag when they ridein the back. 44

CONTINUED


Small ChildrenPlacing a forward-facing child seat inthe front seat of a vehicle equippedwith a passenger’s front airbag canbe hazardous.

Larger ChildrenChildren who have outgrown childseats are also at risk of being injuredor killed by an inflating passenger’sfront airbag.

InfantsNever put a rear-facing child seat inthe front seat of a vehicle equippedwith a passenger’s front airbag.

All Children Should Sit in a BackSeat

The Passenger’s Front AirbagPoses Serious Risks

Driver

andP

assengerSafety

31

０５／０９／１３　１９：４４：２７　３１ＳＣＶ６３０　００３６　

－

To remind you of the passenger’sfront airbag hazards, and thatchildren must be properly restrainedin a back seat, your vehicle haswarning labels on the dashboard(U.S. models) and on the front visors.Please read and follow theinstructions on these labels.

Canadian Models

U.S. Models


32

０５／０９／１３　１９：４４：４０　３１ＳＣＶ６３０　００３７　

－

Many parents say they prefer to putan infant or a small child in the frontpassenger seat so they can watch thechild, or because the child requiresattention.

Placing a child in the front seatexposes the child to hazards in afrontal collision, and paying closeattention to a child distracts thedriver from the important tasks ofdriving, placing both of you at risk.

If a child requires physical attentionor frequent visual contact, westrongly recommend that anotheradult ride with the child in the backseat. The back seat is far safer for achild than the front.

Place the largest child in the frontseat, provided the child is largeenough to wear the lap/shoulderbelt properly (see page ).

Move the vehicle seat as far to therear as possible (see page ).

Have the child sit upright and wellback in the seat (see page ).

Make sure the seat belt is properlypositioned and secured (see page

).

Your vehicle has two back seatswhere children can be properlyrestrained. If you ever have to carrythree children, and a child must ridein front:

44

15

73

17

If You Must Drive with SeveralChildren

If a Child Requires CloseAttention


Driver

andP

assengerSafety

33

０５／０９／１３　１９：４４：４８　３１ＳＣＶ６３０　００３８　

－

During a crash, thebelt could press deep into the childand cause serious or fatal injuries.


If you are not wearing aseat belt in crash, you could bethrown forward and crush thechild against the dashboard or aseat-back. If you are wearing aseat belt, the child can be tornfrom your arms and be seriouslyhurt or killed.

Leaving children withoutadult supervision is illegal in moststates and Canadian provinces,and can be very hazardous.

For example, infants and smallchildren left in a vehicle on a hotday can die from heatstroke. Achild left alone with the key in theignition switch can accidentally setthe vehicle in motion, possiblyinjuring themselves or others.

Children who play in vehiclescan accidentally get trapped inside.Teach your children not to play inor around vehicles.

Even veryyoung children learn how tounlock vehicle doors, turn on theignition, and open the tailgate orhatch, which can lead to accidentalinjury or death.

Additional Safety Precautions


Never put a seat belt over yourselfand a child.

Never let two children use thesame seat belt.

Never hold an infant or child onyour lap.

Do not leave children alone in avehicle.

Lock all doors, the tailgate and thehatch when your vehicle is not inuse.

Keep vehicle keys and remotetransmitters (on some models) outof the reach of children.

34

０５／０９／１３　１９：４４：５５　３１ＳＣＶ６３０　００３９　

CONTINUED

An infant must be properlyrestrained in a rear-facing, recliningchild seat until the child reaches theseat maker’s weight or height limitfor the seat, and the child is at leastone year old.

Only a rear-facing child seat providesproper support for a baby’s head,neck, and back.

Two types of seats may be used: aseat designed exclusively for infants,or a convertible seat used in the rear-facing, reclining mode.

If placedfacing forward, an infant could bevery seriously injured during afrontal collision.

A rear-facing child seat can be placedin any seating position in the backseat, but not in the front.

If the passenger’s front airbaginflates, it can hit the back of thechild seat with enough force to kill orseriously injure an infant.

When properly installed, a rear-facing child seat may prevent thedriver or a front passenger frommoving their seat as far back asrecommended, or from locking theirseat-back in the desired position.

Protecting Infants

Child Seat Type

Child Seat Placement

Do not put a rear-facing child seat ina forward-facing position.

Never put arear-facing child seat in the frontseat.

Protecting Infants and Small Children

Driver

andP

assengerSafety

35

Placing a rear-facing child seatin the front seat can result inserious injury or death if thepassenger’s front airbag inflates.

Always place a rear-facing childseat in the back seat, not thefront.

０５／０９／１３　１９：４５：０４　３１ＳＣＶ６３０　００４０　

A child who is at least 1 year old, andwho fits within the child seat maker’sweight and height limits, should berestrained in a forward-facing,upright child seat.

Of the different seats available, werecommend those that have a five-point harness system as shown.

In either situation, we stronglyrecommend that you install the childseat directly behind the frontpassenger seat, move the seat as farforward as needed, and leave itunoccupied. Or you may wish to geta smaller rear-facing child seat.

If the vehicle seat is toofar forward, or the child’s head isthrown forward during a collision, aninflating airbag can strike the childwith enough force to cause veryserious or fatal injuries.

We strongly recommend placing aforward-facing child seat in a backseat, not the front.

We also recommend that a smallchild use the child seat as long aspossible, until the child reaches theweight or height limit for the seat.

Protecting Infants and Small Children

Protecting Small Children

Child Seat Type

Placing a forward-facing child seat inthe front seat of a vehicle equippedwith a passenger’s airbag can behazardous.

Child Seat Placement

36

０５／０９／１３　１９：４５：１２　３１ＳＣＶ６３０　００４１　

Since LATCH-compatible child seatsare easier to install and reduce thepossibility of improper installation,we recommend selecting this style.

We also recommend selecting aLATCH-compatible seat with a rigid,rather than a flexible, anchor (seepage ).

In seating positions and vehicles notequipped with LATCH, a LATCH-compatible child seat can be installedusing a seat belt.

If it is necessary to put a forward-facing child seat in the front, movethe vehicle seat as far to the rear aspossible, and be sure the child seat isfirmly secured to the vehicle and thechild is properly strapped in the seat. Whatever type of seat you choose, to

provide proper protection, a childseat should meet threerequirements:

Look for FMVSS213 or CMVSS 213 on the box.

Rear-facing for infants, forward-facing for small children.

When buying a child seat, you needto choose either a conventional childseat, or one designed for use withthe lower anchors and tethers forchildren (LATCH) system.

Conventional child seats must besecured to a vehicle with a seat belt,whereas LATCH-compatible seatsare secured by attaching the seat tohardware built into the two secondrow seats.

1.

2.

39

CONTINUED

Protecting Infants and Small Children, Selecting a Child Seat

Selecting a Child Seat

The child seat should meet U.S. orCanadian Motor Vehicle SafetyStandard 213.

The child seat should be of theproper type and size to fit the child.

Driver

andP

assengerSafety

37

Placing a forward-facing childseat in the front seat can resultin serious injury or death if thefront airbag inflates.

If you must place a forward-facing child seat in front, movethe vehicle seat as far back aspossible, and properly restrainthe child.

０５／０９／１３　１９：４５：２０　３１ＳＣＶ６３０　００４２　

After selecting a proper child seatand a good place to install the seat,there are three main steps ininstalling the seat:

All child seats must besecured to the vehicle with the lappart of a lap/shoulder belt or withthe LATCH (lower anchors andtethers for children) system. Achild whose seat is not properlysecured to the vehicle can beendangered in a crash.

After installing a childseat, push and pull the seatforward and from side-to-side toverify that it is secure.

A child seat secured with a seat beltshould be installed as firmly aspossible. However, it does not needto be ‘‘rock solid.’’ Some side-to-side

movement can be expected andshould not reduce the child seat’seffectiveness.

If the child seat is not secure, tryinstalling it in a different seatingposition, or use a different style ofchild seat that can be firmly secured.

Before purchasing a conventionalchild seat, or using a previouslypurchased one, we recommend thatyou test the seat in the specificvehicle seating position or positionswhere the seat will be used.

Make sure the child is properlystrapped in the child seataccording to the child seat maker’sinstructions. A child who is notproperly secured in a child seatcan be seriously injured in a crash.

The following pages provideguidelines on how to properly installa child seat. A forward-facing childseat is used in all examples, but theinstructions are the same for rear-facing child seats.

3.

1.

2.

3.

Selecting a Child Seat, Installing a Child Seat

Installing a Child Seat

Properly secure the child seat tothe vehicle.

Make sure the child seat is firmlysecured.

The child seat should fit thevehicle seating position (orpositions) where it will be used.

Secure the child in the child seat.

38

０５／０９／１３　１９：４５：２８　３１ＳＣＶ６３０　００４３　

CONTINUED

Make sure there are no objectsnear the anchors that couldprevent a secure connectionbetween the child seat and theanchors.

To install a LATCH-compatible childseat:

Place the child seat on the vehicleseat, then attach the seat to thelower anchors according to thechild seat maker’s instructions.Remove both anchor covers by

pulling forward.Some LATCH-compatible seatshave a rigid-type connector asshown above.

Your vehicle is equipped withLATCH (lower anchors and tethersfor children) in the rear seats. Thelower anchors are located betweenthe seat-back and seat bottom, andare to be used only with a child seatdesigned for use with LATCH. Thelocation of each lower anchor ismarked with a small button abovethe point.

1.

2.

3.


Installing a Child Seat withLATCH

Driver

andP

assengerSafety

39

MARKS

ANCHOR COVER Rigid-type

０５／０９／１３　１９：４５：３６　３１ＳＣＶ６３０　００４４　

Whatever type you have, followthe child seat maker’s instructionsfor adjusting or tightening the fit.

Remove the head restraint (seepage ). Make sure the removedhead restraints are secured in thecargo area, and reinstalled whenthe child seat is removed.

Slide the anchor cover open.

Route the tether strap over the topof the seat-back, making sure thestrap is not twisted.

Other LATCH-compatible seats havea flexible-type connector as shownabove.

5.

4.

6.

7.75


40

TETHER ANCHOR

ANCHOR COVERFlexible-type

０５／０９／１３　１９：４５：４４　３１ＳＣＶ６３０　００４５　

CONTINUED

With the child seat in the desiredseating position, route the beltthrough the child seat accordingto the seat maker’s instructions,then insert the latch plate into thebuckle.

When not using the LATCH system,all child seats must be secured to thevehicle with the lap part of a lap/shoulder belt.

Push and pull the child seatforward and from side-to-side toverify that it is secure.

Attach the tether strap hook to thetether anchor, then tighten thestrap as instructed by the childseat maker.

In addition, the lap/shoulder belts inall seating positions except thedriver’s have a locking mechanismthat must be activated to secure achild seat.

1.8.

9.


Installing a Child Seat with a Lap/Shoulder Belt

Driver

andP

assengerSafety

41

TETHER ANCHOR

TETHER STRAP HOOK

０５／０９／１３　１９：４５：５１　３１ＳＣＶ６３０　００４６　

Push and pull the child seatforward and from side-to-side toverify that it is secure enough tostay upright during normal drivingmaneuvers. If the child seat is notsecure, unlatch the belt, allow it toretract fully, then repeat thesesteps.

After confirming that the belt islocked, grab the shoulder part ofthe belt near the buckle, and pullup to remove any slack from thelap part of the belt. Remember, ifthe lap part of the belt is not tight,the child seat will not be secure.

To remove slack, it may help toput weight on the child seat, orpush on the back of the seat whilepulling up on the belt.

To activate the lockable retractor,slowly pull the shoulder part of thebelt all the way out until it stops,then let the belt feed back into theretractor.

After the belt has retracted, tug onit. If the belt is locked, you will notbe able to pull it out. If you can pullthe belt out, it is not locked, andyou will need to repeat these steps.

To deactivate the lockingmechanism and remove a childseat, unlatch the buckle, unroutethe seat belt, and let the belt fullyretract.

4. 5.2.

3.


42

０５／０９／１３　１９：４５：５９　３１ＳＣＶ６３０　００４７　

Since a tether can provide additionalsecurity to the lap/shoulder beltinstallation, we recommend using atether whenever one is required oravailable.

After securing the child seat in thedesired position (see page ),remove the head restraint (seepage ), then route the tetherstrap over the top of the seat-back.

Slide the anchor cover open asshown.

Attach the tether strap hook to theanchor, making sure the strap isnot twisted.

A child seat with a tether can beinstalled in either back seat, usingone of the anchor points shownabove.

Tighten the strap according to theseat maker’s instructions. Makesure the removed head restraint issecured in the cargo area.Reinstall the head restraint inplace when you remove the childseat.

1.41

2.

3.

4.75

Installing a Child Seat with aTether


Driver

andP

assengerSafety

43

TETHER STRAP HOOK

ANCHOR POINTS TETHER ANCHOR

ANCHOR COVER

TETHER ANCHOR

０５／０９／１３　１９：４６：０８　３１ＳＣＶ６３０　００４８　

Does the shoulder belt crossbetween the child’s neck and arm?

Is the lap part of the belt as low aspossible, touching the child’sthighs?

Will the child be able to stayseated like this for the whole trip?

If you answer yes to all thesequestions, the child is ready to wearthe lap/shoulder belt correctly. Ifyou answer no to any question, thechild needs to ride on a booster seat.To determine if a lap/shoulder belt

properly fits a child, have the childput on the seat belt, then askyourself:

Does the child sit all the way backagainst the seat?

Do the child’s knees bendcomfortably over the edge of theseat?

When a child reaches therecommended weight or height limitfor a forward-facing child seat, thechild should sit in a back seat on abooster seat and wear a lap/shoulderbelt.The following pages giveinstructions on how to check properseat belt fit, what kind of boosterseat to use if one is needed, andimportant precautions for a childwho must sit in front.

1.

2.

3.

4.

5.

Checking Seat Belt Fit

Protecting Larger Children

44

Allowing a child age 12 or underto sit in front can result in injuryor death if the passenger’s frontairbag inflates.

If a larger child must ride in front,move the vehicle seat as farback as possible, use a boosterseat if needed, have the childsit up properly and wear theseat belt properly.

０５／０９／１３　１９：４６：１６　３１ＳＣＶ６３０　００４９　

CONTINUED

A side airbag also poses risks. If anypart of a larger child’s body is in thepath of a deploying side airbag, thechild could receive possibly seriousinjuries.

If the passenger’s front airbaginflates in a moderate to severefrontal collision, the airbag can causeserious injuries to a child who isunrestrained, improperly restrained,sitting too close to the airbag, or outof position.

The National Highway Traffic SafetyAdministration and TransportCanada recommend that all childrenage 12 and under be properlyrestrained in the back seat.

A child who has outgrown a forward-facing child seat should ride in aback seat and use a booster seatuntil the lap/shoulder belt fits themproperly without the booster.

Some states and Canadian provincesalso require children to use a boosterseat until they reach a given age orweight (e.g., 6 years or 60 lbs). Besure to check current laws in thestates or provinces where you intendto drive.

Booster seats can be high-back orlow-back. Whichever style you select,make sure the booster meets federalsafety standards and that you followthe booster seat maker’s instructions.

If a child who uses a booster seatmust ride in front, move the vehicleseat as far back as possible and besure the child is wearing the seatbelt properly.

A child may continue using a boosterseat until the tops of their ears areeven with the top of the vehicle’s orbooster’s seat-back. A child of thisheight should be tall enough to usethe lap/shoulder belt without abooster seat.

Using a Booster Seat When Can a Larger Child Sit inFront


Driver

andP

assengerSafety

45

０５／０９／１３　１９：４６：２５　３１ＳＣＶ６３０　００５０　

If you decide that a child can safelyride up front, be sure to:

Carefully read the owner’s manual,and make sure you understand allseat belt instructions and all safetyinformation.

Move the vehicle seat to the rear-most position.

Have the child sit up straight, backagainst the seat, and feet on ornear the floor.

To safely ride in front, a child mustbe able to follow the rules, includingsitting properly, and wearing the seatbelt properly throughout a ride.

Physically, a child must be largeenough for the lap/shoulder belt toproperly fit (see page ). If the seatbelt does not fit properly, with orwithout the child sitting on a boosterseat, the child should not sit in front.

Check that the child’s seat belt isproperly and securely positioned.

Supervise the child. Even maturechildren sometimes need to bereminded to fasten the seat beltsor sit properly.

Of course, children vary widely. Andwhile age may be one indicator ofwhen a child can safely ride in front,there are other important factors youshould consider.

This couldcause very serious injuries duringa crash. It also increases thechance that the child will slideunder the belt in a crash and beinjured.

This could resultin serious neck injuries during acrash.


Devices intended toimprove a child’s comfort orreposition the shoulder part of aseat belt can make the belt lesseffective and increase the chanceof serious injury in a crash.

44

Additional Safety Precautions

Maturity

Physical Size

Do not let a child put the shoulderpart of a seat belt behind the backor under the arm.

Do not let a child wear a seat beltacross the neck.

Two children should never use thesame seat belt.

Do not put any accessories on aseat belt.


46

０５／０９／１３　１９：４６：３６　３１ＳＣＶ６３０　００５１　

Your vehicle’s exhaust containscarbon monoxide gas. You shouldhave no problem with carbonmonoxide entering the vehicle innormal driving if you maintain yourvehicle properly.

High levels of carbon monoxide cancollect rapidly in enclosed areas,such as a garage. Do not run theengine with the garage door closed.Even with the door open, run theengine only long enough to move thevehicle out of the garage.

Have the exhaust system inspectedfor leaks whenever:

The vehicle is raised for an oilchange.

You notice a change in the soundof the exhaust.

The vehicle was in an accidentthat may have damaged theunderside.

Select the fresh air mode.Select the mode.Turn the fan on high speed.Set the temperature control to acomfortable setting.

If you must sit in your parked vehiclewith the engine running, even in anunconfined area, adjust the heatingand cooling system as follows:

With the tailgate or hatch open, airflow can pull exhaust gas into yourvehicle’s interior and create ahazardous condition. If you mustdrive with the tailgate or hatch open,open all the windows and set theheating and cooling system as shownbelow.

1.2.3.4.

Carbon Monoxide Hazard

Driver

andP

assengerSafety

47

Carbon monoxide gas is toxic.Breathing it can causeunconsciousness and even killyou.

Avoid any enclosed areas oractivities that expose you tocarbon monoxide.

０５／０９／１３　１９：４６：４４　３１ＳＣＶ６３０　００５２　

These labels are in the locationsshown. They warn you of potentialhazards that could cause seriousinjury. Read these labels carefully. Ifa label comes off or becomes hard toread, contact your dealer for areplacement.

U.S. models only

U.S. models

Canadian models

U.S. models only

Safety Labels

48

SUN VISOR

DASHBOARD

０５／０９／１３　１９：４６：５６　３１ＳＣＶ６３０　００５３　

On models without side airbags

On models with side airbags

On models with side airbags

Safety Labels

Driver

andP

assengerSafety

49

HOOD

RADIATOR CAP

０５／０９／１３　１９：４７：０９　３１ＳＣＶ６３０　００５４　

50

０５／０９／１３　１９：４７：１１　３１ＳＣＶ６３０　００５５　

This section gives information aboutthe controls and displays thatcontribute to the daily operation ofyour vehicle. All the essentialcontrols are within easy reach.

...........................Control Locations . 52............................Instrument Panel . 53

..........Instrument Panel Indicators . 54.............................................Gauges . 58

...................................Trip Meter . 58.....................................Odometer . 58

..................................Fuel Gauge . 59..........Check Fuel Cap Indicator . 59

...................Temperature Gauge . 59Controls Near the Steering

.......................................Wheel . 60.Windshield Wipers and Washers . 61

...........Turn Signal and Headlights . 62........Instrument Panel Brightness . 63

.................Hazard Warning Button . 63

.................Rear Window Defogger . 63..........Steering Wheel Adjustment . 64

...............................Keys and Locks . 65........................Immobilizer System . 66.......................Remote Transmitter . 67

................................Ignition Switch . 69......................................Door Locks . 70

......................Power Door Locks . 70..................................Rear Doors . 70

............................................Hatch . 71........................................Tailgate . 72

.................................................Seats . 73........................Seat Adjustments . 73

Driver’s Seat Height..............................Adjustment . 74

...................Front Seat Armrests . 74..........................Head Restraints . 75........................Rear Seat Access . 75

..........Reclining the Front Seats . 76...............Folding the Rear Seats . 77

..........Removing the Rear Seats . 79..............................Power Windows . 81

.............................................Mirrors . 82....Adjusting the Power Mirrors . 82

.................................Rear Windows . 83

.................................Parking Brake . 83............................................Skylight . 83

...........Interior Convenience Items . 86.......................Beverage Holders . 87

..........Accessory Power Sockets . 87....................................Glove Box . 87

.................................Interior Lights . 88................................Ceiling Light . 88

........................Cargo Area Light . 88.....................................Spotlights . 88

..................Ignition Switch Light . 88

Instruments and Controls

Instruments

andC

ontrols

51

０５／０９／１３　１９：４７：１５　３１ＳＣＶ６３０　００５６　

Control Locations

52

POWER DOOR LOCK SWITCH AUDIO SYSTEM

A/T model is shown.

HOOD RELEASEHANDLE

POWER WINDOWSWITCHES

HEATING/COOLINGCONTROLS

(P.70)

(P.81)

(P.82)(P.94)

(P.90)

MIRROR CONTROLS

PARKING BRAKE(P.83)


CRUISE CONTROLBUTTONS

(P.127)(P. 120)

(P.120)

０５／０９／１３　１９：４７：１９　３１ＳＣＶ６３０　００５７　

＊

＊The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text.

Instrument Panel

Instruments

andC

ontrols

53

IMMOBILIZERSYSTEMINDICATOR

MAINTENANCEREQUIRED INDICATOR

DOOR-OPENINDICATOR

CRUISE CONTROLINDICATOR

LOW OIL PRESSURE INDICATOR

PARKING BRAKE ANDBRAKE SYSTEMINDICATOR

CHARGING SYSTEMINDICATOR

LOW FUEL INDICATORHIGH BEAM INDICATOR

TAILGATE AND HATCHOPEN INDICATOR

SUPPLEMENTAL RESTRAINTSYSTEM INDICATOR

MALFUNCTION INDICATOR LAMP

ANTI-LOCK BRAKESYSTEM INDICATOR

SEAT BELTREMINDERINDICATOR

SIDE AIRBAG OFFINDICATOR

(P.57)

(P.55)(P.56) (P.55) (P.55)

(P.57)

(P.57)

(P.55)

(P.56)(P.56)

(P.54)

(P.54, 210)

(P.54, 209)

(P.54, 211)

(P.54, 209)

CHECK FUEL CAPINDICATOR(P.59)

０５／０９／１３　１９：４７：２６　３１ＳＣＶ６３０　００５８　

The instrument panel has manyindicators that give you importantinformation about your vehicle.

See page .

If this indicator comes on when theengine is running, the battery is notbeing charged. For more information,see page .

It comes on when you turn theignition switch to the ON (II)position. It is a reminder to checkthe parking brake. Driving withthe parking brake not fullyreleased can damage the brakesand tires.

The engine can be severely damagedif this indicator flashes or stays onwhen the engine is running. Formore information, see page .

This indicator has two functions:This indicator comes on when youturn the ignition switch to the ON(II) position. It reminds you and yourpassengers to fasten your seat belts.A beeper also sounds if you have notfastened your seat belt.

If you turn the ignition switch to theON (II) position before fasteningyour seat belt, the beeper soundsand the indicator flashes. If you donot fasten your seat belt before thebeeper stops, the indicator stopsflashing but remains on.

If you continue driving withoutfastening your seat belt, the beepersounds and the indicator flashesagain at regular intervals.

If it stays on after you have fullyreleased the parking brake whilethe engine is running, or if itcomes on while driving, therecould be a problem with the brakesystem. For more information, seepage .

2.

1.210

209

209211

Malfunction IndicatorLamp

Low Oil PressureIndicator

Charging SystemIndicator

Parking Brake andBrake SystemIndicator

Seat Belt ReminderIndicator

Instrument Panel Indicators

54

U.S. Canada

０５／０９／１３　１９：４７：３７　３１ＳＣＶ６３０　００５９　

This indicator comes on when youturn the ignition switch to the ON(II) position. If it comes on at anyother time, it indicates a potentialproblem with your front airbags orautomatic seat belt tensioners. Onmodels equipped with side airbags,this indicator will also alert you to apotential problem with your sideairbags or passenger’s side airbagautomatic cutoff system. Forcomplete information, see page .

This indicator also blinks severaltimes when you turn the ignitionswitch from the ON (II) position tothe ACCESSORY (I) or LOCK (0)position.

This indicator comes on for a fewseconds when you turn the ignitionswitch to the ON (II) position. It willthen go off if you have inserted aproperly-coded ignition key. If it isnot a properly-coded key, theindicator will blink, and the enginewill not start (see page ).

This indicator normally comes on fora few seconds when you turn theignition switch to the ON (II)position, and when the ignitionswitch is turned to the START (III)position. If it comes on at any othertime, there is a problem with theABS. If this happens, have yourvehicle checked at a dealer. With theindicator on, your vehicle still has

normal braking ability but no anti-lock brakes. For more information,see page .

This indicator comes on when youturn the ignition switch to the ON(II) position. If it comes on at anyother time, it indicates that thepassenger’s side airbag hasautomatically shut off. For moreinformation, see page .

2728

150

66

Standard on U.S. EX models andCanadian Y package

Supplemental RestraintSystem Indicator

Immobilizer SystemIndicator

Anti-lock Brake System(ABS) Indicator

Side Airbag Off Indicator


Instruments

andC

ontrols

55

CanadaU.S.

０５／０９／１３　１９：４７：４６　３１ＳＣＶ６３０　００６０　

This indicator comes on when youturn the ignition switch to the ON(II) position with the headlightswitch off and the parking brake set.It should go off if you turn on theheadlights or release the parkingbrake. If it comes on at any othertime, it means there is a problemwith the DRL. There may also be aproblem with the high beamheadlights.

This indicator comes on with thehigh beam headlights. For moreinformation, see page .

This indicator comes on as areminder that you must refuel soon.

The left or right turn signal indicatorblinks when you signal a lane changeor turn. If the indicators do not blinkor they blink rapidly, it usuallymeans one of the turn signal bulbs isburned out (see page ). Replacethe bulb as soon as possible, sinceother drivers cannot see that you aresignaling.

When you turn on the hazardwarning button, both turn signalindicators blink. All turn signals onthe outside of the vehicle shouldflash.

On Canadian models, this indicatorcomes on with reduced brightnesswhen the daytime running lights(DRL) are on (see page ).

When the indicator comes on, thereis about 1.6 U.S. gal (6 ) of fuelremaining in the tank before theneedle reaches E. There is a smallreserve of fuel remaining in the tankwhen the needle does reach E.

This indicator comes on when youset the cruise control. See page

for information on operating thecruise control.

180

62

62

120

Canadian models only

If equipped

Turn Signal and Hazard WarningIndicators

‘‘Daytime RunningLights’’ Indicator

High Beam Indicator

Low Fuel Indicator

Cruise Control Indicator


56

０５／０９／１３　１９：４７：５７　３１ＳＣＶ６３０　００６１　

－

Canadian models only This indicator reminds you that it istime to take your vehicle in forscheduled maintenance.

This indicator comes on if any dooris not closed tightly.

This indicator comes on if thetailgate or the hatch is not closedtightly.

This indicator comes on when thewasher fluid level is low. Add washerfluid when you see this indicatorcome on (see page ).

Refer to the maintenance schedulesfor normal and severe drivingconditions on pages .

For the first 8,000 miles (12,800 km)after the maintenance requiredindicator is reset, it will come on for2 seconds when you turn the ignitionswitch to the ON (II) position.

Between 8,000 miles (12,800 km)and 10,000 miles (16,000 km), thisindicator will come on for 2 secondswhen you first turn the ignitionswitch to the ON (II) position, andthen flash for 10 seconds.

Hold the button for about 10seconds until the indicator goesoff.

Press and hold the Select/Resetbutton on the instrument panel,then turn the ignition switch to theON (II) position.

Turn off the engine.

Your dealer will reset this indicatorafter completing the scheduledmaintenance. If this maintenance isnot done by your dealer, reset theindicator as follows.

If you exceed 10,000 miles (16,000km) without having the scheduledmaintenance performed, thisindicator will remain on as a constantreminder.

1.

2.

3.

174165 166

Washer Level Indicator Maintenance RequiredIndicator

Door-open Indicator

Tailgate and Hatch OpenIndicator


Instruments

andC

ontrols

57

０５／０９／１３　１９：４８：０９　３１ＳＣＶ６３０　００６２　

This shows the number of miles (U.S.)or kilometers (Canada) driven sinceyou last reset it.

There are two trip meters: Trip Aand Trip B. Switch between thesedisplays and the odometer bypressing the Select/Reset buttonrepeatedly.

Each trip meter works independently,so you can keep track of twodifferent distances.

To reset a trip meter, display it, andthen press and hold the Select/Resetbutton until the number resets to‘‘0.0.’’ Both trip meters will reset ifthe vehicle’s battery goes dead or isdisconnected.

The odometer shows the totaldistance your vehicle has beendriven. It measures miles in U.S.models and kilometers in Canadianmodels. It is illegal under U.S.federal law and Canadian provincialregulations to disconnect, reset, oralter the odometer with the intent tochange the number of miles orkilometers indicated.

Odometer

Trip Meter

Gauges

58

TACHOMETER SPEEDOMETER FUEL GAUGE

ODOMETER/TRIP METER TEMPERATURE GAUGE

SELECT/RESETBUTTON

０５／０９／１３　１９：４８：１７　３１ＳＣＶ６３０　００６３　

This shows the temperature of theengine’s coolant. During normaloperation, the pointer should rise toabout the middle of the gauge. Insevere driving conditions, the pointermay rise to the upper zone. If itreaches the red (hot) mark, pullsafely to the side of the road. Turn topage for instructions andprecautions on checking the engine’scooling system.

If the system still detects a loose ormissing fuel cap, the malfunctionindicator lamp (MIL) comes on.Turn the engine off, and check orretighten the fuel cap until it clicksat least once. The MIL goes outafter several days of normal drivingonce the cap is tightened or replaced.If it does not go out, have your dealerinspect the vehicle. For moreinformation, see page .

If your fuel cap is loose or missing, a‘‘CHECK FUEL CAP’’ messageappears as text in the odometer/tripmeter display after you start theengine. Turn the engine off andconfirm the fuel cap is installed. If itis, loosen the cap, then retighten ituntil it clicks at least once. Whenyou restart the engine, the messageappears again. To scroll to another message, press the select/resetbutton.

This shows how much fuel you have.It may show slightly more or lessthan the actual amount. Drivinguphill or making turns can cause theneedle to fluctuate or the low fuelindicator to come on early. Theneedle returns to the bottom afteryou turn off the ignition.

210

207

Gauges

Temperature Gauge

Check Fuel Cap Indicator(odometer/trip meter message)

Fuel GaugeInstrum

entsand

Controls

59

Avoid driving with an extremely lowf uel level. Running out of f uel couldcause the engine to misf ire, damagingthe catalytic converter.

０５／０９／１３　１９：４８：２５　３１ＳＣＶ６３０　００６４　

＊

＊

To use the horn, press the center pad of the steering wheel.:

Controls Near the Steering Wheel

60

HEADLIGHTS/TURN SIGNALS

REAR WINDOWDEFOGGER

SHIFT LEVER (A/T)

STEERING WHEEL ADJUSTMENT HAZARD WARNING BUTTON

HORN

(P.62)

(P.64)

(P.61)

(P.63)

(P.63)

WINDSHIELD WIPERS/WASHERS

A/T model is shown.


CRUISE CONTROL BUTTONS

(P.120)

(P.120)

(P.143)

０５／０９／１３　１９：４８：３０　３１ＳＣＶ６３０　００６５　

－

－

－

－－－

－

－

－

Push the right lever up or down toselect a position.

The wipers are not activated.

The wipers run at low speed.

The wipers run at high speed.Rotate the switch clockwise toturn the rear window wiper ON.

OFFRotate the switchcounterclockwise to spray thewindow washer without activatingthe wiper.

MISTOFFINT IntermittentLO Low speedHI High speedWindshield washers

The wipers run at highspeed until you release the lever.

The wipers operate everyfew seconds.

Pull thewiper control lever toward you, andhold it. The washers spray until yourelease the lever. The wipers run atlow speed, then complete one moresweep after you release the lever.

Hold past ON to turn the windowwiper on and the window washeron.

1.2.3.4.5.6.

1.

2.

3.4.

Windshield Wiper

OFF

LO

HI

Rear Window Wiper and Washer

MIST

INT

Windshield Washer

Windshield Wipers and Washers

Instruments

andC

ontrols

61

０５／０９／１３　１９：４８：４１　３１ＳＣＶ６３０　００６６　

－

－

－Push down on thelever to signal a left turn and up tosignal a right turn. To signal a lanechange, push lightly on the lever,and hold it. The lever will return tocenter when you release it orcomplete a turn. To flash the high beams, pull the

lever back lightly, then release it.The high beams will stay on as longas you hold the lever back.

Turn SignalOFFParking and interior lightsHeadlights onHigh BeamsFlash high beams

Turning switch to theposition turns on the parking

lights, taillights, instrument panellights, side-marker lights, and rearlicense plate lights. Turning theswitch to the position turns onthe headlights. If you leave the lightson with the key removed from theignition switch, you will hear areminder tone when you open thedriver’s door.

Push the lever backuntil you hear a click to turn on thehigh beams. The blue high beamindicator will come on (see page ).Pull the lever back again to lowbeams.

With the headlight switch off, thehigh beam headlights come on withreduced brightness when you turnthe ignition switch to the ON (II)position and release the parkingbrake. They remain on until you turnthe ignition switch off, even if youset the parking brake.

The headlights revert to normaloperation when you turn them onwith the switch.

1.2.3.4.5.6.

56

Turn Signal

Daytime Running Lights

Headlights

High Beams

(Canadian Models)

Turn Signal and Headlights

62

０５／０９／１３　１９：４８：４９　３１ＳＣＶ６３０　００６７　

Push the button next to the shiftlever to turn on the hazard warninglights (four-way flashers). Thiscauses all four outside turn signalsand both turn indicators in theinstrument panel to flash. Use thehazard warning lights if you need topark in a dangerous area near heavytraffic, or if your vehicle is disabled.

The rear window defogger will clearfog, frost, and thin ice from thewindow. Push the defogger button toturn it on and off. The indicator inthe button comes on to show thedefogger is on. If you do not turn itoff, the defogger will shut itself offafter about 15 minutes. It also shutsoff when you turn off the ignitionswitch. You have to turn thedefogger on again when you restartthe vehicle.

Push the button in the speedometerrepeatedly to adjust the brightnessof the instrument panel lights. Thereare six brightness levels. A segmentdisplay shows the current brightnesslevel.

CONTINUED

Instrument Panel Brightness Rear Window DefoggerHazard Warning Button

Instrument Panel Brightness, Hazard Warning Button, Rear Window Defogger

Instruments

andC

ontrols

63

０５／０９／１３　１９：４８：５８　３１ＳＣＶ６３０　００６８　

Make sure the rear window is clearand you have good visibility beforestarting to drive.

The defogger wires on the inside ofthe rear window can be accidentallydamaged. When cleaning the glass,always wipe side-to-side.

Push the lever up to lock thesteering wheel in that position.

Make sure you have securelylocked the steering wheel in placeby trying to move it up and down.

Make any steering wheel adjustmentbefore you start driving.

Push the lever under the left sideof the steering column all the waydown.

To adjust the steering wheel upwardor downward:

Move the steering wheel up ordown to the desired position.Make sure you can see theinstrument panel gauges and theindicators.

1.

2.

3.

4.

Steering Wheel Adjustment

Rear Window Defogger, Steering Wheel Adjustment

64

Adjusting the steering wheelposition while driving maycause you to lose control of thevehicle and be seriously injuredin a crash.

Adjust the steering wheel onlywhen the vehicle is stopped.

０５／０９／１３　１９：４９：０６　３１ＳＣＶ６３０　００６９　

The master key fits all the locks onyour vehicle. The valet key worksonly in the ignition and the doorlocks. You can keep the glove boxand hatch locked when you leaveyour vehicle and the valet key at aparking facility.

Protect the keys from directsunlight, high temperature, andhigh humidity.

Do not drop the keys or set heavyobjects on them.

Keep the keys away from liquids.If they get wet, dry themimmediately with a soft cloth.

The keys do not contain batteries.Do not try to take them apart.

Some models also come with tworemote transmitters; see page foran explanation of their operation.

You should have received a keynumber tag with your set of keys.You will need this key number if youever have to get a key replaced. Useonly Honda-approved key blanks.

These keys contain electroniccircuits that are activated by theimmobilizer system. They will notwork to start the engine if thecircuits are damaged.

67

Keys and Locks

Instruments

andC

ontrols

65

KEYNUMBERTAG

MASTERKEYS(Black)

VALETKEY(Gray)

０５／０９／１３　１９：４９：１４　３１ＳＣＶ６３０　００７０　

If the system repeatedly does notrecognize the coding of your key,contact your dealer.

Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undrivable.

If you have lost your key and cannotstart your engine, contact yourdealer.

The immobilizer system protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine will notstart.

When you turn the ignition switch tothe ON (II) position, the immobilizersystem indicator should come on fora few seconds, then go off. If theindicator starts to blink, it means thesystem does not recognize thecoding of the key. Turn the ignitionswitch to the LOCK (0) position,remove the key, reinsert it, and turnthe ignition switch to the ON (II)position again.

The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

Immobilizer System

66

０５／０９／１３　１９：４９：２１　３１ＳＣＶ６３０　００７１　

－

－

－

Press this button once tolock both doors and hatch. Someexterior lights will flash. When youpush LOCK twice within 5 seconds,you will hear a beep to verify that thedoors are locked. You cannot lock itif any door is not fully closed or keyis in the ignition switch.

Avoid dropping or throwing thetransmitter.Protect the transmitter fromextreme temperature.Do not immerse the transmitter inany liquid.If you lose a transmitter, thereplacement needs to bereprogrammed by your dealer.

Press this button onceto unlock the driver’s door. Push ittwice to unlock the passenger’s doorand the hatch. Some exterior lightswill flash twice each time you pressthe button. If you do not open eitherdoor or the hatch within 30 seconds,they will automatically relock.

Press this button forabout 1 second to attract attention;the horn will sound and the exteriorlights will flash for about 30 seconds.To cancel panic mode, press anyother button on the remotetransmitter, or turn the ignitionswitch to the ON (II) position.

On EX models

Remote Transmitter

LOCK

UNLOCK

PANIC

Remote Transmitter CareInstrum

entsand

Controls

67

UNLOCKBUTTON

LED LOCKBUTTON

PANICBUTTON

０５／０９／１３　１９：４９：２９　３１ＳＣＶ６３０　００７２　

＋

◎▽

If it takes several pushes on thebutton to lock or unlock the doorsand the hatch, replace the battery assoon as possible.Battery type: CR2025

To replace the battery, remove theround cover on the back of thetransmitter by turning itcounterclockwise with a coin. Inserta new battery with the side facingup, and reinstall the cushion ring.Align the mark on the coverwith the mark on thetransmitter. Set the cover in placeand turn it clockwise.

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.

Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.

Remote Transmitter

Replacing the TransmitterBattery

68

ROUNDCOVER

CUSHIONRING

BATTERY

０５／０９／１３　１９：４９：３７　３１ＳＣＶ６３０　００７３　

－

－

－

－

The ignition switch has fourpositions: LOCK (0), ACCESSORY(I), ON (II), and START (III).

You can insert orremove the key only in this position.To turn the key, push it in slightly. Ifyour vehicle has an automatictransmission, the shift lever mustalso be in park.

If the front wheels are turned, theanti-theft lock may make it difficultto turn the key. Firmly turn thesteering wheel to the left or right asyou turn the key.

You canoperate the audio system and theaccessory power sockets in thisposition.

This is the normal keyposition when driving. Several of theindicators on the instrument panelcome on as a test when you turn theignition switch from theACCESSORY (I) to the ON (II)position.

You will hear a reminder beeper ifyou leave the key in the ignitionswitch in the LOCK (0) or theACCESSORY (I) position and openthe driver’s door. Remove the key toturn off the beeper.

If your vehicle has an automatictransmission, the shift lever must bein Park before you can remove thekey from the ignition switch.

Use this positiononly to start the engine. The switchreturns to the ON (II) position whenyou let go of the key.

Ignition Switch

LOCK (0)

ACCESSORY (I)

ON (II)

START (III)

Instruments

andC

ontrols

69

Removing the key from theignition switch while drivinglocks the steering. This cancause you to lose control of thevehicle.

Remove the key from theignition switch only whenparked.

０５／０９／１３　１９：４９：４４　３１ＳＣＶ６３０　００７４　

To lock all of the doors and hatch,press the door lock switch on eitherfront door, or press the lock tabdown on the driver’s door, or use thekey on the outside lock.Pressing up on the door lock switchwill unlock all of the doors and thehatch.

To open the rear door, pull the reardoor handle located in the rear dooredge. The rear door can be openedonly when the front door is open.

To close the doors, close the reardoor first, then the front door. Thefront door cannot be latched withoutfirst closing the rear door. Closingthe rear door on the front door willdamage both doors.

To unlock the driver’s door from theoutside, turn the key and release it.

To lock the driver’s door, remove thekey from the ignition switch, pull theoutside door handle and push thelock tab down or push the door lockswitch down. Release the handle,then close the door.

The lock tab on the passenger’s doorlocks and unlocks only that door.Pulling up on the driver’s door locktab only unlocks the driver’s door.

Power Door Locks Rear Doors

Door Locks

70

DOOR LOCK SWITCH

LOCK TAB

０５／０９／１３　１９：４９：５３　３１ＳＣＶ６３０　００７５　

To lock or unlock the hatch.

Lock the hatch by pushing downthe lock tab on the driver’s door(see page ), or by using themaster key in the driver’s doorlock.

Lock or unlock the hatch with themaster door lock switch.

With the hatch unlocked, open it bypulling the handle and lifting up.To close the hatch, lower it, thenpress down on the back edge.

When both the hatch and tailgate areopen, the hatch cannot be latchedwithout first closing the tailgate.

Use your master key to lock andunlock the hatch. Turn the keyclockwise to lock the hatch, andcounterclockwise to unlock it.

70

Door Locks

HatchInstrum

entsand

Controls

71

UNLOCK

LOCK

０５／０９／１３　１９：５０：００　３１ＳＣＶ６３０　００７６　

You can open the tailgate only whenthe hatch is open. To open thetailgate, slide the lock lever to theleft and swing down the tailgate. Toclose the tailgate, lift it up and pushit firmly until it latches.

Before closing the tailgate, makesure the hatch is raised. Closing thetailgate on the lowered hatch candamage the hatch and the tailgate.

See page for information oncargo loading. Keep the tailgate andthe hatch closed at all times whiledriving to avoid damaging them, andto prevent exhaust gas from gettinginto the interior. See

on page .47

132

Door Locks

Tailgate

CarbonMonoxide Hazard

72

０５／０９／１３　１９：５０：０６　３１ＳＣＶ６３０　００７７　

－See pages for important safetyinformation and warnings about how toproperly position seats and seat-backs.

12 14

To change the seat-back angle of thefront seat, pull up on the lever on theoutside of the seat bottom. Adjustthe seat-back and make sure it locksinto position.

Make all seat adjustments beforeyou start driving.

To adjust the seat forward andbackward, pull up on the bar underthe seat cushion’s front edge. Try tomove the seat to make sure it islocked in position.

Seats

Seat Adjustments Front SeatInstrum

entsand

Controls

73

０５／０９／１３　１９：５０：１３　３１ＳＣＶ６３０　００７８　

To adjust the height of the driver’sseat, turn the dial on the outside ofthe seat bottom.

To change the angle of the rear seat-back, pull the strap at the insideedge of the seat cushion, make surethe seat-back locks into position.

Each front seat has an armrest onthe side of the seat-back. To use it,pivot it down.

On EX models

Seats

Driver’s Seat Height Adjustment Front Seat Armrests Rear Seat

74

SEAT-BACK ADJUSTMENT STRAP

０５／０９／１３　１９：５０：２１　３１ＳＣＶ６３０　００７９　

See page for important safetyinformation and a warning about how toproperly position the head restraints.

15

The rear seat passengers can get outthrough the passenger’s door. Pushdown on the release lever at the baseof the front passenger’s seat-back,and push the seat-back forward. Theseat-back will tilt forward and theentire seat will move forward.

Make sure the seat is upright andfully latched before sitting in it.

Your vehicle is equipped with headrestraints in all seating positions tohelp protect you and yourpassengers from whiplash and otherinjuries.

They are most effective when youadjust them so the back of theoccupant’s head rests against thecenter of the restraint.

The head restraints in the front andrear seating positions adjust forheight. You need both hands toadjust the restraint. To raise it, pullupward. To lower the restraint, pushthe release button sideways andpush the restraint down.

Seats

Head Restraints Rear Seat AccessInstrum

entsand

Controls

75

RELEASE BUTTON

RELEASE LEVER

０５／０９／１３　１９：５０：２９　３１ＳＣＶ６３０　００８０　

You can recline the seat-backs on thefront seats so they are level with therear seat cushions, making a largecushioned area. To do this:

Adjust the front seats forward asfar as they will go. Pull up the seat-back angle adjustment lever andpivot the seat-back backward untilit is level with the rear seatcushion.

Move the front seat backwarduntil it touches the rear seat.

Adjust the rear seat-back to thedesired position.

Reverse this procedure to return thefront and rear seats to the uprightposition. Make sure you install thehead restraints and the seats arelocked securely before driving.

When you return the seat-back tothe upright position, hold the seat-back to keep it from going up tooquickly.

Remove the head restraints fromthe front seats (see page ), andstore them in the side pockets ofthe cargo area.

1.

2.

3.

4.

75

Reclining the Front Seats

Seats

76

０５／０９／１３　１９：５０：３６　３１ＳＣＶ６３０　００８１　

To create more cargo space, you canfold up each rear seat to each sidewall separately.

Lower the head restraint to itslowest position.

Pull the seat-back adjustmentstrap at the inside edge of the seatcushion and push the seat-backbackward as far as it will go.

Pull the release strap on the seatsupport, and pivot the seat towardthe vehicle’s side wall.

1.

2. 3.

CONTINUED

Folding the Rear Seats

Seats

Instruments

andC

ontrols

77

SEAT-BACK ADJUSTMENT STRAP RELEASE STRAP

０５／０９／１３　１９：５０：４４　３１ＳＣＶ６３０　００８２　

A fastening strap is attached to theinside of the seat cushion. Whilepushing the seat up and towardthe side wall, hook the fasteningstrap to the grab rail.

Fold down the seat support.

Reverse this procedure to return therear seat to the upright position.When not in use, store the fasteningstrap hook in the fabric pocket onthe bottom of the seat cushion.Make sure the seat is lockedsecurely.

4. 5.

Seats

78

GRAB RAIL

FASTENING STRAP

SEAT SUPPORT

０５／０９／１３　１９：５０：４９　３１ＳＣＶ６３０　００８３　

Both seats can be removed to givemore cargo capacity. To remove aseat:

Pull the release strap on the seatsupport to unlock the seat support.

Remove the cover between theseat cushion and the side wall bypulling the tab and pulling thecover straight up.

Push the lock lever forward tounlock the seat.

1.

3.2.

CONTINUED

Removing the Rear Seats

Seats

Instruments

andC

ontrols

79

RELEASE STRAP COVER

TAB LOCK LEVER STEEL HANDLE

０５／０９／１３　１９：５０：５７　３１ＳＣＶ６３０　００８４　

Reverse this procedure to reinstallthe seat. Make sure the seat issecurely locked.

Always remove an unsecured seatfrom the vehicle before driving. Aseat that is not locked in place couldbe thrown about and cause injury ina sudden stop or crash.

Hold the steel handle next to thelock lever and the handle strap atthe outside edge of the seatcushion, and remove the entireseat by pulling it up and backward.

4.

Seats

80

STEEL HANDLE

HANDLE STRAP

０５／０９／１３　１９：５１：０２　３１ＳＣＶ６３０　００８５　

－

－

If the MAIN switch is OFF, thepassenger’s window cannot be raisedor lowered. Keep the MAIN switchoff when you have children in thevehicle so they do not injurethemselves by operating thepassenger’s window unintentionally.

To open/close the driver’swindow, push the window switchfirmly down or up to the seconddetent, and release it. The windowwill automatically go up or down allthe way. To stop the window, pull/push on the window switch briefly.

If the driver’swindow senses any obstacle while itis closing automatically, it willreverse direction, and then stop. Toclose the window, remove theobstacle, then use the window switchagain.If your vehicle’s battery isdisconnected or goes dead, or thedriver’s window fuse is removed, theAUTO function will be disabled. Thepower window system needs to bereset after reconnecting the batteryor installing the fuse.

If the power windows do not operateproperly after resetting, have yourvehicle checked by your dealer.

Pull and hold the driver’s windowswitch to close the windowcompletely, then hold the switchfor about 2 seconds.

Start the engine. Push down andhold the driver’s window switchuntil the window is fully open.

Turn the ignition switch to the ON(II) position to raise or lower eitherwindow. To open the window, pushthe switch down and hold it. Releasethe switch when you want thewindow to stop. Pull back on theswitch and hold it to close thewindow.

1.

2.

AUTO

AUTO REVERSE

Power Windows

Instruments

andC

ontrols

81

DRIVER’S WINDOW SWITCH

MAIN SWITCH

Closing a power window onsomeone’s hands or fingers cancause serious injury.

Make sure your passenger isaway from the window beforeclosing it.

０５／０９／１３　１９：５１：１０　３１ＳＣＶ６３０　００８６　

Keep the inside and outside mirrorsclean and adjusted for best visibility.Be sure to adjust the mirrors beforeyou start driving.

The inside mirror has day and nightpositions. The night position reducesglare from headlights behind you.Flip the tab on the bottom edge ofthe mirror to select the day or nightposition.

Push the appropriate edge of theadjustment switch to move themirror right, left, up, or down.

When you finish, move theselector switch to the center (off)position. This turns theadjustment switch off to keep yoursettings.

Move the selector switch to L(driver’s side) or R (passenger’sside).

1.

2.

3.

Mirrors

Adjusting the Power Mirrors

82

TAB

SELECTOR SWITCH

ADJUSTMENT SWITCH

０５／０９／１３　１９：５１：１７　３１ＳＣＶ６３０　００８７　

To open a rear window, pull the levertowards you, then push it out until itlocks. To close the rear window pullthe lever towards you, then push itback. Make sure the window is fullyclosed and locked.

To lift up the rear of the skylight forventilation, pull down the lever tounlock the skylight, then push it upuntil the skylight is locked in the tilt-up position.

To close the skylight, pull down thelever to unlock the skylight, thenpush it back in place. Make sure theskylight is fully closed and locked.

To apply the parking brake, pull thelever up fully. To release it, pull upslightly, push the button, and lowerthe lever. The parking brakeindicator on the instrument panelshould go out when the parkingbrake is fully released (see page ).54

CONTINUED

If equipped

Rear Windows, Parking Brake, Skylight

Parking BrakeRear Windows SkylightInstrum

entsand

Controls

83

PARKING BRAKE LEVER

Driving the vehicle with the parkingbrake applied can damage the rearbrakes and axles.

０５／０９／１３　１９：５１：２７　３１ＳＣＶ６３０　００８８　

Turn off the engine, and set theparking brake. Then pull down thelever, squeeze both sides of the pivotwhile pushing up the red tab in thelever, and pull the lever assemblyaway from the ceiling.

Push up the rear of the skylight.Standing on the tailgate with thehatch down, hold both sides of theskylight and pull it toward you toremove it from the vehicle roof.

To remove the skylight:

Skylight

84

Bef ore lif ting the skylight, make surethe roof of the vehicle is dry. Rain orremaining water af ter car-washing mayget into the f rame of the skylight. Inwinter, remove the buildup of snow onthe roof .

If you try to tilt up the skylight inbelow-f reezing temperatures, or whenit is covered with snow or ice, you candamage it.

The maximum weight on the tailgate is440 lbs (200 kg).

０５／０９／１３　１９：５１：３３　３１ＳＣＶ６３０　００８９　

With the rear seats in their uprightposition, store the skylight, facedown in its bag in the cargo area.Secure the bag with four hooks onthe cargo area floor. Do not storeanything on top of the skylight.

To reinstall the skylight, make surethe air deflector is pushed down.When reinstalling the lever assembly,push in both red pivots, and alignwith the receptacle holes. Let thepivots move out until they rest in theholes securely. Make sure theskylight is fully closed and latched.

Skylight

Instruments

andC

ontrols

85

An unsecured skylight can bethrown about and cause seriousinjury in a sudden stop or crash.

Make sure to store the skylightin its bag, and secure the bag tothe hooks on the cargo areafloor.

０５／０９／１３　１９：５１：３８　３１ＳＣＶ６３０　００９０　

＊

＊

＊

＊

＊

＊

＊

Interior Convenience Items

86

CARGO AREA COIN TRAYCARGO AREASIDE POCKET

DOOR POCKETS

VANITY MIRROR

RADIO POCKET

ACCESSORYPOWERSOCKET

GLOVE BOX

CENTER LOWER POCKETBEVERAGE HOLDERS

CEILING POCKET

: If equipped BUNGEE CORDS

SEAT-BACK POCKET

０５／０９／１３　１９：５１：４３　３１ＳＣＶ６３０　００９１　

These sockets are intended to supplypower for 12 volt DC accessoriesthat are rated 120 watts or less (10amps).

Open the glove box by pulling thebottom of the handle. Close it with afirm push. Lock or unlock the glovebox with the master key.

Be careful when you are using thebeverage holders. A spilled liquidthat is very hot can scald you or yourpassengers. Spilled liquids can alsodamage the upholstery, andelectrical components in the interior.

Your vehicle has one or twoaccessory power sockets, dependingon the model. All models have afront accessory power socket on thedashboard above the glove box.

The EX model has anotheraccessory power socket in the cargoarea on the passenger’s side.

None of the sockets will power anautomotive type cigarette lighterelement. When more than onesocket is being used, the combinedpower rating of the accessoriesshould be 120 watts or less(10 amps).

Interior Convenience Items

Beverage Holders Glove Box

Accessory Power Sockets

Instruments

andC

ontrols

87

An open glove box can causeserious injury to your passengerin a crash, even if thepassenger is wearing the seatbelt.

Always keep the glove boxclosed while driving.

０５／０９／１３　１９：５１：５０　３１ＳＣＶ６３０　００９２　

The ceiling light has a three-positionswitch: ON, Door Activated, andOFF.In the Door Activated (center)position, the light comes on whenyou:

Open any door.Remove the key from the ignition.If you do not open a door, the lightfades out in about 30 seconds.Unlock the doors with the key orremote transmitter.

The cargo area light has a three-position switch. In the centerposition, the light comes on whenyou open the hatch.

The ignition switch light comes onwhen you unlock the driver’s door,and fades out about 30 seconds afteryou close the door.

Turn on the spotlight by pushing thelens. Push the lens again to turn itoff. You can use the spotlights at alltimes.

On U.S. EX models and Canadian Ypackage

Interior Lights

Ceiling Light SpotlightsCargo Area Light

Ignition Switch Light

88

ON

OFF

DOOR ACTIVATED

０５／０９／１３　１９：５１：５８　３１ＳＣＶ６３０　００９３　

The standard audio system hasmany features. This sectiondescribes those features and how touse them. (If you have an optionalaudio system, refer to the operatinginstructions that came with it.)

The heating and air conditioningsystem in your vehicle provides acomfortable driving environment inall weather conditions.

Your vehicle has an anti-theft audiosystem that requires a code numberto enable it.

...............Vents, Heating, and A/C . 90.......................Air Flow Controls . 91

...................................Ventilation . 92........................Using the Heater . 92

.............................Using the A/C . 92.............Dehumidify the Interior . 93

................To Defog and Defrost . 93To Remove Exterior Frost

......or Ice From the Windows . 93............Playing the AM/FM Radio . 94

..............AM/FM Radio Reception . 98Playing the XM

...........................Satellite Radio . 100................................Playing a Disc . 106

..................Protecting Your Discs . 113.......Disc Player Error Messages . 114

...Disc Changer Error Messages . 115.................Radio Theft Protection . 116

..........................Setting the Clock . 117................Remote Audio Controls . 119

...............................Cruise Control . 120

Features

Features

89

０５／０９／１３　１９：５２：０２　３１ＳＣＶ６３０　００９４　

Vents, Heating, and A/C

90

FAN CONTROL DIAL TEMPERATURECONTROL DIAL

MODE CONTROL DIAL

RECIRCULATION BUTTON AIR CONDITIONING(A/C) BUTTON

REAR WINDOW DEFOGGERBUTTON

MAX A/C POSITION

DEFROST POSITION

０５／０９／１３　１９：５２：０６　３１ＳＣＶ６３０　００９５　

The outside air intakes for theheating and cooling system are atthe base of the windshield. Keep thisarea clear of leaves and other debris.

The system should be left in freshair mode under almost all conditions.Keeping the system in recirculationmode, particularly with the A/C off,can cause the windows to fog up.

Switch to recirculation mode whendriving through dusty or smokyconditions, then return to fresh airmode.

This button turns the rear windowdefogger off and on (see page ).

Use the mode control dial to selectthe vents the air flows from. Someair will flow from the dashboardvents in all modes.

Turning this dial clockwise increasesthe temperature of the airflow.

Turn this dial clockwise to increasethe fan speed and airflow.

This button turns the airconditioning on and off. Theindicator in the button is on whenthe A/C is on.

When the recirculation indicator ison, air from the vehicle’s interior issent throughout the system again.When the indicator is off, air isbrought in from the outside of thevehicle (fresh air mode).

The system automaticallyturns on the A/C and

switches to recirculation mode. Airflows from the center and side ventsin the dashboard.

Air flows from the centerand corner vents in the dashboard.

Airflow is divided betweenthe vents in the dashboard and thefloor vents.

Air flows from the floorvents. When you select , thesystem automatically switches tofresh air mode.

Airflow is divided betweenthe floor vents and the defrostervents at the base of the windshield.

63

CONTINUED

Rear Window Defogger Button

Mode Control Dial

Air Conditioning (A/C) Button

Temperature Control Dial

Fan Control Dial

Air Flow Controls

Recirculation Button


Features

91

０５／０９／１３　１９：５２：２４　３１ＳＣＶ６３０　００９６　

Air flows from the defrostervents at the base of the windshield. The heater uses engine coolant to

warm the air. If the engine is cold, itwill be several minutes before youfeel warm air coming from thesystem.

When you select or ,the system automatically switches tofresh air mode and turns on the A/C.The A/C indicator does not come on.

Select and fresh air mode.Set the fan to the desired speed.Adjust the warmth of the air withthe temperature control dial.The flow-through ventilation system

draws in outside air, circulates itthrough the interior, then exhausts itthrough vents near the tailgate.

Turn the temperature control dialall the way to the left.Make sure the A/C is off.Select and fresh air mode.Set the fan to the desired speed.

Set the mode control dial to MAXA/C.The system automatically turns onthe A/C, selects andswitches to recirculation mode.Make sure the temperaturecontrol dial is all the way to the left.Set the fan to the desired speed.

you cancool it down more rapidly by partiallyopening the windows, turning on theA/C, and setting the fan tomaximum speed in Fresh Air mode.

Turn on the A/C by pressing thebutton. The indicator in the buttoncomes on when a fan speed isselected.Make sure the temperaturecontrol dial is all the way to the left.Select .If the outside air is humid, selectrecirculation mode. If the outsideair is dry, select fresh air mode.Set the fan to the desired speed.

Air conditioning places an extra loadon the engine. Watch the enginecoolant temperature gauge (see page

). If it moves near the red zone,turn off the A/C until the gaugereading returns to normal.

1.

2.3.4.

1.2.3.

1.

2.

3.

1.

2.

3.4.

5.

59To cool the interior with MAX A/C:

If the interior is very warm,


Using the A/C

Using the Heater

Ventilation(fresh air mode)

92

０５／０９／１３　１９：５２：３６　３１ＳＣＶ６３０　００９７　

Air conditioning, as it cools, removesmoisture from the air. When used incombination with the heater, itmakes the interior warm and dry.

This setting is suitable for all drivingconditions whenever the outsidetemperature is above 32°F (0°C).

To remove fog from the inside of thewindows:

Switch the fan on.Turn on the air conditioning.Select and fresh air mode.Adjust the temperature controldial to your preference.

Set the fan to the desired speed, orhigh for faster defrosting.Select . The systemautomatically switches to fresh airmode and turns on the A/C. (TheA/C indicator will not come on inU.S. vehicles, if the A/C was off tostart with)Adjust the temperature controldial so the airflow feels warm.Select to help clear therear window.To increase airflow to thewindshield, close the corner vents.

When you switch to another modefrom , the A/C turns off. Butif it was on to start with, it stays on.

Select

Select .Set the fan and temperaturecontrols to maximum level.Select to help clear therear window.

For your safety, make sure you havea clear view through all the windowsbefore driving.

close the dashboard corner vents byrotating the wheel below each vent.This sends more warm air to thewindshield defroster vents. Once thewindshield is clear, select fresh airmode to avoid fogging the windows.

1.2.3.4.

1.

2.

3.

4.

5.

1.

2.3.

4.


Dehumidify the Interior To Remove Exterior Frost or IceFrom the Windows

To Defog and DefrostF

eatures

93

０５／０９／１３　１９：５２：４６　３１ＳＣＶ６３０　００９８　

. The systemautomatically switches to fresh airmode and turns on the A/C. TheA/C indicator does not come on(U.S. vehicles) if the A/C was off

To clear the windows faster, you can

to begin with.

Playing the AM/FM Radio

94

AM/FM BUTTON STEREO INDICATOR

SCAN INDICATOR

SCAN BUTTON

SEEK BAR

PWR/VOLKNOB

AUTO SELECTBUTTON

PRESET BUTTONS

PWR/VOL KNOB

SEEK BUTTONS

TUNE KNOB

SCAN BUTTON PRESET BUTTONS

AUTO SELECTBUTTON

TUNE KNOB

AM/FMBUTTON

STEREO INDICATOR

U.S. LX and Canadian Base models Canadian Y package

０５／０９／１３　１９：５２：５１　３１ＳＣＶ６３０　００９９　


Features

95

STEREO INDICATORPWR/VOL KNOB

SEEK BUTTONS

SCAN BUTTON PRESET BUTTONS

AUTO SELECTBUTTON

AM/FMBUTTON

TUNE KNOB

U.S. EX models

０５／０９／１３　１９：５２：５６　３１ＳＣＶ６３０　０１００　

－

－

－

－

You can use any of five methods tofind radio stations on the selectedband: thepreset buttons, and .

The ignition switch must be in theACCESSORY (I) or the ON (II)position. Turn the system on bypushing the PWR/VOL knob or theAM/FM button. Adjust the volumeby turning the same knob.

The band and frequency that theradio was last tuned to is displayed.To change bands, press the FM/AMbutton. On the FM band, ST will bedisplayed if the station is broadcast-ing in stereo. Stereo reproduction onAM is not available.

Use the TUNE knob totune the radio to a desired frequency.Turn the knob right to tune to ahigher frequency, or left to tune to a

lower frequency.

The seek functionsearches up and down from thecurrent frequency to find a stationwith a strong signal. To activate it,press either ( or ), thenrelease it.

The scan function samplesall stations with strong signals on theselected band. To activate it, pressthe SCAN button, then release it.You will see SCAN in the display.The system will scan for a stationwith a strong signal. When it findsone, it will stop and play that stationfor about 5 seconds (U.S. LX andCanadian base models) or 10seconds (U.S. EX and Canadian Ypackage models).

If you do nothing, the system willthen scan for the next strong stationand play it for 5 seconds (U.S. LXand Canadian base models) or 10

seconds (U.S. EX and Canadian Ypackage models). When it plays astation you want to listen to, pressthe SCAN button again.

Each preset button canstore one frequency on AM and twofrequencies on FM.

Select the desired band, AM orFM. FM1 and FM2 let you storetwo frequencies with each presetbutton.Use the tune, seek, or scanfunction to tune the radio to adesired station.Pick a preset button, and hold ituntil you hear a beep.Repeat steps 1 through 3 to store atotal of six stations on AM andtwelve stations on FM.

2.

3.

4.

1.

To Play the Radio

To Select a Station

TUNE, SEEK, SCAN,AUTO SELECT

TUNE

SEEK

SCAN

Preset


96

０５／０９／１３　１９：５３：０６　３１ＳＣＶ６３０　０１０１　

－－

－

If you aretraveling far from home and can nolonger receive your preset stations,you can use the auto select feature tofind stations in the local area.

These twomodes adjust the strength of thesound coming from each speaker.BAL adjusts the side-to-side strength,while FAD adjusts the front-to-backstrength.

Usethe TRE/BAS/SUB-W modes toadjust the tone to your liking.

Press the A. SEL button. ‘‘A. SEL’’flashes in the display, and the systemgoes into scan mode for severalseconds. It stores the frequencies ofsix AM and twelve FM stations inthe preset buttons.

You will see a ‘‘0’’ displayed afterpressing a preset button if autoselect cannot find a strong station forevery preset button.

If you do not like the stations autoselect has stored, you can storeother frequencies on the presetbuttons as previously described.

press theA. SEL button. This restores thepresets you originally set.

Each mode is shown in the display asit changes. Turn the MODE orSOUND knob to adjust the setting toyour liking. When the level reachesthe center, you will see ‘‘C’’ in thedisplay. The system willautomatically return the display tothe selected audio mode about 5seconds after you stop adjusting amode.

Press the MODE or SOUND knobrepeatedly to display the bass (BAS),treble (TRE), balance (BAL), fader(FAD), and sub-woofer (SUB-W)settings.

To turn off auto select,AUTO SELECT Balance/Fader

Treble/Bass/Sub-Woofer

Adjusting the Sound


Features

97

０５／０９／１３　１９：５３：１３　３１ＳＣＶ６３０　０１０２　

The radio can receive the completeAM and FM bands.Those bands cover these frequen-cies:

AM band: 530 to 1,710 kHzFM band: 87.7 to 107.9 MHz

How well the radio receives stationsis dependent on many factors, suchas the distance from the station’stransmitter, nearby large objects,and atmospheric conditions.

Driving very near the transmitter ofa station that is broadcasting on afrequency close to the frequency ofthe station you are listening to canalso affect your radio’s reception.You may temporarily hear bothstations, or hear only the station youare close to.

A radio station’s signal gets weakeras you get farther away from itstransmitter. If you are listening to anAM station, you will notice the soundvolume becoming weaker, and thestation drifting in and out. If you arelistening to an FM station, you willsee the stereo indicator flickering offand on as the signal weakens.Eventually, the stereo indicator willgo off and the sound will fadecompletely as you get out of range ofthe station’s signal.

Radio stations on the AM band areassigned frequencies at least 10 kHzapart (530, 540, 550). Stations on theFM band are assigned frequencies atleast 0.2 MHz apart (87.9, 88.1, 88.3).

Stations must use these exactfrequencies. It is fairly common forstations to round-off the frequency intheir advertising, so your radio coulddisplay a frequency of 100.9 eventhough the announcer may identifythe station as ‘‘FM101.’’

Radio Frequencies Radio Reception

AM/FM Radio Reception

98

０５／０９／１４　１１：３８：５６　３１ＳＣＶ６３０　０１０３　

Radio signals, especially on the FMband, are deflected by large objectssuch as buildings and hills. Yourradio then receives both the directsignal from the station’s transmitter,and the deflected signal. This causesthe sound to distort or flutter. This isa main cause of poor radio receptionin city driving.

Radio reception can be affected byatmospheric conditions such asthunderstorms, high humidity, andeven sunspots. You may be able toreceive a distant radio station oneday and not receive it the next daybecause of a change in conditions.

Electrical interference from passingvehicles and stationary sources cancause temporary reception problems.

As required by the FCC:Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

AM/FM Radio Reception

Features

99

０５／０９／１３　１９：５３：２８　３１ＳＣＶ６３０　０１０４　

Satellite radio is only available on U.S.models.

Your vehicle is capable of receivingXM Satellite Radio anywhere in theUnited States, except Hawaii andAlaska.XM is a registered trademark ofXM Satellite Radio, Inc.

U.S. EX models

Playing the XM Satellite Radio

XM Satellite Radio

100

TUNEKNOB

PWR/VOLKNOB

CATEGORY INDICATOR

CATEGORYBUTTONS

XM BUTTON

SCANBUTTON

PRESETBUTTONS

CHANNELINDICATOR

DISPLAY/MODE BUTTON

０５／０９／１３　１９：５３：３４　３１ＳＣＶ６３０　０１０５　

－－

－

XM radio receives signals from twosatellites to produce clear, high-quality digital reception. It offersmany channels in several categories.Along with a large selection ofdifferent types of music, XM radioallows you to view channel andcategory selections in the display.

To listen to XM radio, turn theignition switch to the ACCESSORY(I) or the ON (II) position. Push thePWR/VOL knob to turn on the audiosystem, and press the ‘‘XM’’ button.Adjust the volume by turning thePWR/VOL knob. The last channelyou listened to will show in thedisplay.

To switch betweenchannel mode and category mode,press and hold the DISP/MODEbutton until the mode changes.

In the channel mode, you can selectall of the available channels. In thecategory mode, such as Jazz, Rock,Classical, etc., you can select all ofthe channels within that category.

Each time you press and release theDISP/MODE button, the displaychanges in the following sequence:channel name, channel number,category, artist name, and music title.

You may experience periods whenXM Radio does not transmit theartist’s name and song titleinformation. If this happens, there isnothing wrong with your system.

Turn the TUNE knob leftor right to select channels. In thecategory mode, you can only selectchannels within that category.

Inthe category mode, press eitherbutton to select another category.

CONTINUED


Operating the Satellite Radio

MODETUNE

CATEGORY ( or )

Features

101

０５／０９／１３　１９：５３：４２　３１ＳＣＶ６３０　０１０６　

－－The scan function givesyou sampling of all channels while inthe channel mode. In the categorymode, only the stations within thatcategory are scanned. To activatescan, press the SCAN button. Thesystem plays each channel innumerical order for 5 seconds, thenselects the next channel. When youhear a channel you want to continuelistening to, press the button.

You can store up to 12preset channels using the six presetbuttons. Each button stores onechannel from the XM1 band and onechannel from the XM2 band.

To store a channel:

Press the XM button. Either XM1or XM2 will show in the display.

Use the TUNE knob, or theCATEGORY or SCAN buttons totune to a desired channel.

In category mode, only channelswithin that category can beselected. In channel mode, allchannels can be selected.

Pick the preset button you wantfor that channel. Press and holdthe button until you hear a beep.

Repeat steps 2 and 3 to store thefirst six channels.

Press the XM button again. Theother XM band will show. Storethe next six channels using steps 2and 3.

Once a channel is stored, press andrelease the proper preset button totune to it.

2.

3.

4.

1.

5.


SCAN Preset

102

０５／０９／１３　１９：５３：５０　３１ＳＣＶ６３０　０１０７　

－

－

－

－

－

－

XM is loading theaudio or programinformation.

The channelcurrently selected isno longerbroadcasting.

The encryptioncode is beingupdated. Waituntil theencryption code isfully updated.Channels 0 and 1should still worknormally.

The signal iscurrently tooweak. Move thevehicle to an areaaway from tallbuildings, andwith anunobstructed viewof the southernhorizon.

The selected channelnumber does not exist oris not part of yoursubscription, or thischannel has no artist ortitle information at thistime.

There is a problemwith the XMantenna. Pleaseconsult yourdealer.

XM Radio Display Messages

‘‘LOADING’’

‘‘OFF AIR’’

‘‘UPDATING’’

‘‘NO SIGNAL’’

‘‘ - - - - ’’

‘‘ANTENNA’’


Features

103

０５／０９／１３　１９：５３：５６　３１ＳＣＶ６３０　０１０８　

The XM satellites are in orbit overthe equator; therefore, objects southof the vehicle may cause satellitereception interruptions. To helpcompensate for this, ground-basedrepeaters are placed in majormetropolitan areas.Satellite signals are more likely to beblocked by tall buildings andmountains the farther north youtravel from the equator. Carryinglarge items on a roof rack can alsoblock the signal.


104

Signal may beblocked bymountains orlarge obstaclesto the south.

SATELLITE

GROUNDREPEATER

０５／０９／１３　１９：５４：００　３１ＳＣＶ６３０　０１０９　

Depending on where you drive, youmay experience reception problems.Interference can be caused by any ofthese conditions:

Driving on the north side of aneast/west mountain road.Driving on the north side of alarge commercial truck on aneast/west road.Driving in tunnels.Driving on a road beside a verticalwall, steep cliff, or hill to the southof you.Driving on the lower level of amulti-tiered road.Driving on a single lane roadalongside dense trees taller than50 ft. (15 m) to the south of you.Large items carried on a roof rack.

There may be other geographicsituations that could affect XM radioreception.

If your XM Radio service has expiredor you purchased your vehicle froma previous owner, you can listen to asampling of the broadcasts availableon XM Satellite Radio. With theignition switch in the ACCESSORY(I) or ON (II) position, push thePWR/VOL knob to turn on the audiosystem and press the XM button. Avariety of music types and styles willplay.

If you decide to purchase XMsatellite radio service, contact XMRadio at , or at1-800-852-9696. You will need to givethem your radio I.D. number andyour credit card number. To get yourradio I.D. number, turn the TUNE

knob until ‘‘0’’ appears in the display.Your I.D. will appear in the display.

While waiting for activation, makesure your vehicle remains in an openarea with good reception. Once youraudio system is activated, you’ll beable to listen to XM radio broadcasts.XM Radio will continue to send anactivation signal to your vehicle forat least 12 hours from the activationrequest. If the service has not beenactivated after 36 hours, contact XMRadio.

After you have registered with XMRadio, keep your audio system in thesatellite radio mode while you waitfor activation. This should take about30 minutes.

As required by the FCC:Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.

www.xmradio.com


Receiving Satellite Radio Service

Features

105

０５／０９／１３　１９：５４：１１　３１ＳＣＶ６３０　０１１０　

Playing a Disc

106

PWR/VOLKNOB

CD BUTTON

REPEAT INDICATOR

EJECT BUTTONCD SLOT

SEEK/SKIP BARSKIP BUTTONS

EJECT BUTTON

CD SLOT

PWR/VOL KNOB

RANDOM INDICATOR

RANDOM BUTTON

RANDOM BUTTON

RANDOM INDICATOR

DISPLAY BUTTON

FOLDER KNOB

CDBUTTONFOLDER

INDICATOR

REPEATBUTTON

SCANBUTTON

DISC INDICATOR

Canadian Y package

０５／０９／１３　１９：５４：１６　３１ＳＣＶ６３０　０１１１　

U.S. LX and Canadian base models

Playing a Disc

Features

107

CD BUTTON

SKIP BUTTONS

EJECT BUTTON

CD SLOT

PWR/VOL KNOB

RANDOM INDICATOR

FOLDER INDICATOR

DISC INDICATOR

REPEATBUTTON

SCANBUTTON

DISPLAY BUTTON

FOLDER KNOB

RANDOM BUTTON

U.S. EX models

０５／０９／１３　１９：５４：２１　３１ＳＣＶ６３０　０１１２　

To load or play discs, the ignitionswitch must be in the ACCESSORY(I) or ON (II) position.

Video CDs and DVDs will not workin this unit.

The specifications of the compatibleMP3 file are:Sampling frequency: 32/44.1/48 kHzBit rate: 8/16/24/32/40/48/56/64/80/96/112/128/160/192/224/256/320 kbpsCompatible with variable bit rate andmulti-session.Maximum layers (including ROOT):8

You operate the disc player with thesame controls used for the radio. Toselect the disc player, press the CD/AUX button. You will see ‘‘CD’’ in thedisplay. The number of the trackplaying is shown in the display. Thesystem will continuously play a discuntil you change modes.

If a file on an MP3 or WMA disc isprotected by digital rightsmanagement (DRM), the audiounit displays FORMAT, and thenskips to the next file.

The sound quality of MP3 andWMA discs generally degrades asthe bit rate increases.

Because the compressed audioformat of MP3 and WMA discsallows them to store largeamounts of files and tagginginformation, these discs may takemore time to begin playing.

The disc player can also play CD-RsWMA files, and CD-RWscompressed in MP3 standard. Whenplaying a disc in MP3, you will see‘‘MP3’’ in the display. You can selectup to folders or tracks.255


Playing a Disc

To Play a Disc

Note:

108

Do not use discs with adhesive labels.The label can curl up and cause thedisc to jam in the unit.

０５／０９／１３　１９：５４：２９　３１ＳＣＶ６３０　０１１３　

－ Each time youpress and release the , theplayer skips forward to thebeginning of the next track (files inMP3/WMA mode). Press andrelease the to skip backward tothe beginning of the current track.Press it again to skip to thebeginning of the previous track.

To move rapidly within a track, pressand hold or .

You will see CUE or REW in thedisplay while moving within a track.

If you turn the system off while adisc is playing, either with the PWR/VOL knob or by turning off theignition switch, the disc will stay inthe drive. When you turn the systemback on, the disc will begin playingwhere it left off.

Insert a disc into the slot. The drivewill pull the disc in the rest of theway to play it. When the systemreaches the end of the disc, it willreturn to the beginning and play thedisc again.

You can also play 3-inch (8-cm) discswithout using an adapter ring. If you press the DISP/MODE button

while playing a disc, additionalinformation (track, album, artist, etc.)may be displayed.

To play the radio when a disc isplaying, press the AM/FM button.Press the CD/AUX button again toswitch back to the disc player.

Use the SEEK/SKIP button while adisc is playing to select passages andchange tracks (files in MP3/WMAmode).

In MP3/WMA mode, use theFOLDER knob to select folders inthe disc, and use the SEEK/SKIPbutton to change files.

CONTINUED

Except EX models

Playing a Disc

SEEK/SKIP

To Change or Select Tracks/Files

Features

109

０５／０９／１３　１９：５４：３７　３１ＳＣＶ６３０　０１１４　

－

－

－

－

－

This feature,when activated, replays all the fileson the selected folder in the orderthey are compressed in MP3/WMA.To activate folder repeat, press andhold the RPT button for 2 seconds.You will see RPT in thedisplay. The system continuouslyreplays the current folder. Press andhold the RPT button for 2 seconds toturn it off.

This feature plays thetracks (all files in each folder inMP3/WMA mode) within a disc inrandom order. To activate randomplay, press and release the RDMbutton. You will see RDM in thedisplay. Press the RDM button againto return to normal play.

Thisfeature, when activated, plays thefiles within a folder in random order,rather than in the order they arecompressed in MP3/WMA. Toactivate folder random play, pressand hold the RDM button. You willsee RDM in the display. Thesystem will then select and play filesrandomly. This continues until youdeactivate folder random play bypressing the RDM button again orselecting a different folder with theFOLDER knob.

Toselect a different folder, use theFOLDER knob to move to thebeginning of the next folder. Turnthe knob right to move to thebeginning of the current folder. Turnthe knob left to skip to the beginningof the previous folder.

To continuously replaya track (files in MP3/WMA mode),press and release the RPT button.You will see RPT in the display.Press the RPT button again to turn itoff.

In MP3/WMA mode


Playing a Disc

FOLDER-REPEAT

RANDOM (Random within aDisc)

FOLDER-RANDOM

FOLDER SELECTION

REPEAT (TRACK/FILEREPEAT)

110

０５／０９／１３　１９：５４：４３　３１ＳＣＶ６３０　０１１５　

－－

If you turn the system off while adisc is playing, either with the PWR/VOL knob or by turning off theignition switch, the disc will stay inthe drive. When you turn the systemback on, the disc will begin playingwhere it left off.

Press the eject button ( ) toremove the disc. If you eject the disc,but do not remove it from the slot,the system will automatically reloadthe disc after 15 seconds and put it inpause mode. To begin playing, pressthe CD/AUX button.

Press the AM/FM button to switchto the radio while a disc is playing.To play the disc, press the CD button.

The scan function samplesall tracks/files on the selected disc inthe order they are recorded. Toactivate scan, press and hold theSCAN button until you hear a beep.You will see SCAN in the display.You will get a 10 second sampling ofeach track/file on the selected disc.Press the SCAN button again to exitscan and play the last track/filesampled.

Pressing either side of the SEEK/SKIP button also turns off scan.

This feature,when activated, samples all files onthe selected folder in order. Toactivate folder scan, press and holdthe SCAN button until you hear abeep. You will see SCAN inthe display. The system will thenplay the first file for about 10seconds. If you do nothing, thesystem will then play the first file ineach folder for 10 seconds. When itplays a file you want to continuelistening to, press the SCAN buttonagain.

Pressing either side of the SEEK/SKIP button or selecting a differentfolder with the FOLDER knob alsoturns off folder scan.

Playing a Disc

To Stop Playing a DiscSCAN FOLDER SCANF

eatures

111

０５／０９／１３　１９：５４：５１　３１ＳＣＶ６３０　０１１６　

－＋

－＋

If you select an empty slot in themagazine, the changer will searchfor the next available disc to load andplay.

The auxiliary input jack is on thedashboard next to the accessorypower socket. The system will acceptauxiliary input from standard audioaccessories.

When the accessory is connected tothe auxiliary input jack, press theAUX button to select it.

See pages and forinformation on error messages.

For information on how to handleand protect discs, see page .

An optional six disc changer isavailable for your vehicle. This discchanger uses the same controls usedfor the in-dash disc player or theradio.

Load the desired discs in themagazine, and load the magazine inthe changer according to theinstructions that came with the unit.

To select the disc changer, press theCD/AUX button. The disc and tracknumbers will be displayed. To selecta different disc, use the preset 5(DISC ) or the preset 6 (DISC )button. To select the previous disc,press the preset 5 (DISC ), or thepreset 6 (DISC ) to select the nextdisc in sequence.

113

115114

If equippedAuxiliary Input Jack

Audio System Malfunction

Protecting Discs

Operating the Optional DiscChanger

Playing a Disc

112

０５／０９／１３　１９：５５：００　３１ＳＣＶ６３０　０１１７　

Never try to insert foreign objects inthe CD player or the magazine.

When a disc is not being played,store it in its case to protect it fromdust and other contamination. Toprevent warpage, keep discs out ofdirect sunlight and extreme heat.

To clean a disc, use a clean soft cloth.Wipe across the disc from the centerto the outside edge.

Handle a disc by its edges; nevertouch either surface. Do not placestabilizer rings or labels on the disc.These, along with contaminationfrom finger prints, liquids, and felt-tip pens, can cause the disc to notplay properly, or possibly jam in thedrive.

When using CD-R or CD-RW discs,use only high quality CDs labeledfor audio use.

When recording a CD-R orCD-RW, the recording must beclosed for it to be used by thesystem.

A new disc may be rough on theinner and outer edges. The smallplastic pieces causing this roughnesscan flake off and fall on the recordedsurface of the disc, causing skippingor other problems. Remove thesepieces by rubbing the inner andouter edges with the side of a pencilor pen.

Handle your discs properly toprevent damage and skipping.

Play only standard round discs.Odd-shaped discs may jam in thedrive or cause other problems.

General Information Protecting Discs

Protecting Your Discs

Features

113

０５／０９／１３　１９：５５：０８　３１ＳＣＶ６３０　０１１８　

IndicationIf you see an error message in thedisplay while playing a disc, find thecause in the chart to the right. If youcannot clear the error message, takethe vehicle to your dealer.

Cause Solution

FOCUS error

Mechanical error

High temperature

Press the EJECT button and pull out the disc.Check if it is inserted correctly in the player.Make sure the disc is not scratched or damaged.

Press the EJECT button and pull out the disc.Check the disc for damage or deformation.If the disc cannot be pulled out, or the errormessage does not disappear after the disc isejected, see your dealer.Will disappear when the temperature returns tonormal.

::

U.S. EX models and Canadian Y packageExcept U.S. EX models and Canadian Y package

Disc Player Error Messages

114

０５／０９／１３　１９：５５：１７　３１ＳＣＶ６３０　０１１９　

IndicationIf you see an error message in thedisplay while playing a disc, find thecause in the chart to the right. If youcannot clear the error message, takethe vehicle to your dealer.

SolutionCause

Press the magazine eject button, and pull themagazine out.If the message does not disappear or themagazine cannot be pulled out, see your dealer.

Insert disc.

Press the magazine eject button, and pull themagazine out. Check for an error message, andinsert the magazine again. If the message doesnot disappear or the magazine cannot be pulledout, see your dealer.Will disappear when the temperature returns tonormal.

Insert magazine.

FOCUS error

No disc in the magazine

Mechanical error

High temperature

No magazine in thechanger

: U.S. EX models and Canadian Y package: Except U.S. EX models and Canadian Y package

Disc Changer Error Messages

Features

115

０５／０９／１３　１９：５５：２８　３１ＳＣＶ６３０　０１２０　

If your vehicle’s battery isdisconnected or goes dead, or theradio fuse is removed, the audiosystem will disable itself. If thishappens, you will see ‘‘CODE’’ in thefrequency display the next time youturn on the system. Use the presetbuttons to enter the five-digit code.The code is on the radio code cardincluded in your Owner’s Manual kit.When it is entered correctly, theradio will start playing.

If you make a mistake entering thecode, do not start over; complete thefive-digit sequence, then enter thecorrect code. You have 10 tries toenter the correct code. If you areunsuccessful in 10 attempts, youmust then leave the system on for 1hour before trying again.

If you lose the card, you must obtainthe code number from a dealer. Todo this, you will need the system’sserial number.

You should have received a card thatlists your audio system’s code andserial numbers. It is best to store thiscard in a safe place at home. Inaddition, you should write the audiosystem’s serial number in this owner’smanual.

Your vehicle’s audio system willdisable itself if it is disconnectedfrom electrical power for any reason.To make it work again, you mustenter a specific five-digit code in thepreset buttons. Because there arehundreds of number combinationspossible from five-digits, making thesystem work without knowing theexact code is nearly impossible.


Radio Theft Protection

116

０５／０９／１３　１９：５５：３３　３１ＳＣＶ６３０　０１２１　

If your vehicle’s battery isdisconnected or goes dead, you willneed to set the clock.

You can use the R button to quicklyset the time to the nearest hour.Press the R button while pressingthe CLOCK button. If the displayedtime is before the half hour, pressingR sets the clock back to the previoushour. If the displayed time is afterthe half hour, pressing R sets theclock forward to the beginning of thenext hour.For example:1:06 will reset to 1:001:53 will reset to 2:00

To set the hour, press the H buttonwhile pressing the CLOCK (SCAN/RPT) button until the hour advancesto the desired time. Change theminute by pressing the M buttonwhile pressing the CLOCK (SCAN/RPT) button until the minuteadvances to the desired time.

Press and hold the CLOCK buttonuntil the numbers flash and you heara beep. Change the hour by pressingthe H button until the numbersadvance to the desired time. Changethe minute by pressing the M buttonuntil the numbers advance to thedesired time.

CONTINUED

On U.S. EX models

U.S. LX and Canadian Base models

Setting the Clock

Features

117

CLOCKBUTTON

H BUTTON R BUTTON

TIME DISPLAY

M BUTTON

CLOCKBUTTON

H BUTTON R BUTTONM BUTTON

TIMEDISPLAY

０５／０９／１３　１９：５５：４２　３１ＳＣＶ６３０　０１２２　

You can quickly set the time to thenearest hour. If the displayed time isbefore the half hour, press the R(RESET) button to set the clockback to the previous hour. If thedisplayed time is after the half hour,pressing R sets the clock forward tothe beginning of the next hour.

For example:1:06 will reset to 1:001:53 will reset to 2:00

When you are finished, press theCLOCK button again.

On Canadian Y package

Setting the Clock

118

H BUTTON R BUTTONM BUTTON

TIMEDISPLAY CLOCK BUTTON

０５／０９／１３　１９：５５：４８　３１ＳＣＶ６３０　０１２３　

▲ ▼

are mounted in the steering wheelhub. These let you control basicfunctions without removing yourhand from the wheel.

The middle button adjusts thevolume up ( ) or down ( ). Pressthe top or bottom of the button andhold it until the desired volume isreached, then release it.

The MODE button changes themode. Pressing the buttonrepeatedly selects FM1, FM2, AM orCD (if a CD is loaded).

The CHANNEL button has twofunctions, depending on whether youare listening to the radio, or playing aCD.

If you are listening to the radio, usethe CH button to change stations.Each time you press this button, thesystem advances to the next presetstation on the band you are listeningto. You will see the number of theselected Preset button in the display.To change bands, or to change fromFM1 to FM2, press the MODEbutton.

If you are playing a CD, the systemskips to the beginning of the nexttrack each time you push the CHbutton. You will see the disc andtrack number in the display.

Remote Audio Controls

Features

119

CH BUTTON

VOLUMEBUTTON

MODEBUTTON

０５／０９／１３　１９：５５：５４　３１ＳＣＶ６３０　０１２４　

Three controls for the audio system

On all models except Canadian base

Accelerate to the desired cruisingspeed above 25 mph (40 km/h).Press and release the SET/DECEL button on the steeringwheel. The indicator on theinstrument panel comes on toshow the system is now activated.

Cruise control may not hold the setspeed when you are going up anddown hills. If your speed increasesgoing down a hill, use the brakes toslow down. This will cancel cruisecontrol. To resume the set speed,press the RES/ACCEL button. Theindicator on the instrument panel willcome back on.

Cruise control allows you to maintaina set speed above 25 mph (40 km/h)without keeping your foot on theaccelerator pedal. It should be usedfor cruising on straight, openhighways. It is not recommended forcity driving, winding roads, slipperyroads, heavy rain, or bad weather.

Push in the cruise control masterbutton. The indicator in the buttoncomes on.

1.

2.

3.

If equipped Using Cruise Control

Cruise Control

120

CANCELBUTTON

RES/ACCEL BUTTON

SET/DECEL BUTTONImproper use of the cruisecontrol can lead to a crash.

Use the cruise control onlywhen traveling on openhighways in good weather.

０５／０９／１３　１９：５６：０２　３１ＳＣＶ６３０　０１２５　

You can increase the set cruisingspeed in any of these ways:

Press and hold the RES/ACCELbutton. When you reach thedesired cruising speed, release thebutton.

Push on the accelerator pedal.Accelerate to the desired cruisingspeed, and press the SET/DECELbutton.

You can decrease the set cruisingspeed in any of these ways:

Press and hold the SET/DECELbutton. Release the button whenyou reach the desired speed.

To slow down in very smallamounts, tap the SET/DECELbutton. Each time you do this,your vehicle will slow down about1 mph (1.6 km/h). Tap the brake or clutch pedal.

Push the CANCEL button on thesteering wheel.Push the cruise control masterbutton.

To increase the speed in verysmall amounts, tap the RES/ACCEL button. Each time you dothis, your vehicle speeds up about1 mph (1.6 km/h).

Tap the brake or clutch pedallightly with your foot. TheCRUISE CONTROL indicator onthe instrument panel goes out.When the vehicle slows to thedesired speed, press the SET/DECEL button.

Even with cruise control turned on,you can still use the acceleratorpedal to speed up for passing. Aftercompleting the pass, take your footoff the accelerator pedal. The vehiclewill return to the set cruising speed.

Resting your foot on the brake orclutch pedal causes cruise control tocancel.

You can cancel cruise control in anyof these ways:

When you push the CANCEL button,or tap the brake or clutch pedal, thesystem remembers the previouslyset cruising speed. To return to thatspeed, accelerate to above 25 mph(40 km/h), then press and releasethe RES/ACCEL button. Theindicator comes on, and the vehicleaccelerates to the same cruisingspeed as before.

Pressing the cruise control masterbutton turns the system off anderases the previous cruising speed.

Changing the Set Speed

Resuming the Set Speed

Cancelling Cruise Control

Cruise Control

Features

121

０５／０９／１３　１９：５６：１４　３１ＳＣＶ６３０　０１２６　

122

０５／０９／１３　１９：５６：１７　３１ＳＣＶ６３０　０１２７　

Before you begin driving yourvehicle, you should know whatgasoline to use and how to check thelevels of important fluids. You alsoneed to know how to properly storeluggage or packages. Theinformation in this section will helpyou. If you plan to add anyaccessories to your vehicle, pleaseread the information in this sectionfirst.

.............................Break-in Period . 124.................Fuel Recommendation . 124

.........Service Station Procedures . 126....................................Refueling . 126

Opening and Closing the.......................................Hood . 127

...................................Oil Check . 128.............Engine Coolant Check . 128

...............................Fuel Economy . 129...Accessories and Modifications . 130

.............................Carrying Cargo . 132

Before Driving

Before

Driving

123

０５／０９／１３　１９：５６：２０　３１ＳＣＶ６３０　０１２８　

Help assure your vehicle’s futurereliability and performance by payingextra attention to how you driveduring the first 600 miles (1,000 km).During this period:

Avoid full-throttle starts and rapidacceleration.

Do not change the oil until thescheduled maintenance time.

Avoid hard braking for the first200 miles (300 km).

Do not tow a trailer.

You should also follow theserecommendations with anoverhauled or exchanged engine, orwhen the brakes are replaced.

Your vehicle is designed to operateon unleaded gasoline with a pumpoctane number of 87 or higher. Useof a lower octane gasoline can causea persistent, heavy metallic rappingnoise that can lead to engine damage.

In addition, in order to maintain goodperformance, fuel economy, andemissions control, we stronglyrecommend, in areas where it isavailable, the use of gasoline thatdoes NOT contain manganese-basedfuel additives such as MMT.

You may hear a knocking noise fromthe engine if you drive the vehicle atlow engine speed (below about 1,000rpm) in a higher gear. To stop this,raise the engine speed by shifting toa lower gear.

We recommend quality gasolinecontaining detergent additives thathelp prevent fuel system and enginedeposits.

On vehicles with manual transmission

Break-in Period, Fuel Recommendation

Break-in Period Fuel Recommendation

124

０５／０９／１３　１９：５６：３０　３１ＳＣＶ６３０　０１２９　

Some gasoline today is blended withoxygenates such as ethanol orMTBE. Your vehicle is designed tooperate on oxygenated gasolinecontaining up to 10 % ethanol byvolume and up to 15 % MTBE byvolume. Do not use gasolinecontaining methanol.

If you notice any undesirableoperating symptoms, try anotherservice station or switch to anotherbrand of gasoline.

For further important fuel-relatedinformation, please refer to your

.

Fuel Recommendation

Quick Start Guide

Before

Driving

125

０５／０９／１３　１９：５６：３４　３１ＳＣＶ６３０　０１３０　

Park with the driver’s side closestto the gas pump.

Outside of the vehicle, locate andopen the fuel fill door by pulling onthe notched edge.

Remove the fuel fill cap slowly.You may hear a hissing sound aspressure inside the tank escapes.Place the cap in the holder on thefuel fill door.

Stop filling the tank after the fuelnozzle automatically clicks off. Donot try to ‘‘top off’’ the tank. Leavesome room for the fuel to expandwith temperature changes.

even though the tank is not full,there may be a problem with yourvehicle’s fuel vapor recoverysystem. The system helps keepfuel vapors from going into theatmosphere. Try filling at anotherpump. If this does not fix theproblem, consult your dealer.

Push the fuel fill door closed.

Screw the fuel fill cap back onuntil it clicks at least once. If you do not properly tighten the cap, the malfunction indicator lampmay come on (see page ).

1.

2.

3.

4.

5.

6.

210

If the fuel nozzle keeps clicking offRefueling

Service Station Procedures

126

Gasoline is highly flammableand explosive. You can beburned or seriously injuredwhen handling fuel.

Stop the engine, and keepheat, sparks, and flame away.Handle fuel only outdoors.Wipe up spills immediately.

０５／０９／１３　１９：５６：４２　３１ＳＣＶ６３０　０１３１　

Pull the support rod out of its clipand insert the end into the hole inthe hood.

If the hood latch handle movesstiffly, or if you can open the hoodwithout lifting the handle, themechanism should be cleaned andlubricated.

Park the vehicle, and set theparking brake. Pull the hoodrelease handle located under thelower left corner of the dashboard.The hood will pop up slightly.

Put your fingers under the frontedge of the hood near the center.The hood latch handle is abovethe ‘‘H’’ logo. Push this handle upto release it. Lift up the hood.

Lift it up slightly to remove thesupport rod from the hole. Put thesupport rod back into its holding clip.Lower the hood to about a foot(30 cm) above the fender, then let itdrop. Make sure it is securelylatched.

1.

2.

3.

To Close the Hood:

Opening and Closing the Hood


Before

Driving

127

LATCH

HOOD RELEASE HANDLE SUPPORT ROD

CLIP

０５／０９／１３　１９：５６：５１　３１ＳＣＶ６３０　０１３２　

Wait a few minutes after turning theengine off before you check the oil.

Remove the dipstick (orange tab).

Wipe the dipstick with a cleancloth or paper towel.

Insert it all the way back in its tube.

Remove the dipstick again, andcheck the level. It should bebetween the upper and lowermarks.

Look at the coolant level in theradiator reserve tank. Make sure it isbetween the MAX and MIN lines. Ifit is below the MIN line, see

on page forinformation on adding the propercoolant.

Refer toon page for information

about checking other items on yourvehicle.

If it is near or below the lower mark,see on page .

1.

2.

3.

4.

173

164

170

Oil Check Engine Coolant Check

AddingEngine Coolant

Owner’s MaintenanceChecks

Adding Engine Oil


128

DIPSTICK

UPPER MARK

LOWER MARK

RESERVE TANKMAX

MIN

０５／０９／１３　１９：５７：０２　３１ＳＣＶ６３０　０１３３　

The build-up of snow or mud onyour vehicle’s underside addsweight and rolling resistance.Frequent cleaning helps your fuelmileage and reduces the chance ofcorrosion.

Always drive in the highest gearpossible.

The air conditioning puts an extraload on the engine which makes ituse more fuel. Use the fresh-airventilation when possible.

Combine several short trips intoone.an underinflated tire

causes more ‘‘rolling resistance,’’which uses more fuel.

Drive moderately. Rapidacceleration, abrupt cornering,and hard braking use more fuel.

Try to maintain a constant speed.Every time you slow down andspeed up, your vehicle uses extrafuel. Use cruise control whenappropriate.

Always maintain your vehicleaccording to the maintenanceschedule. See

on page.164

For example,

Improving Fuel Economy

Owner’sMaintenance Checks

Fuel Economy

Before

Driving

129

０５／０９／１３　１９：５７：０９　３１ＳＣＶ６３０　０１３４　

When properly installed, cellularphones, alarms, two-way radios, andlow-powered audio systems shouldnot interfere with your vehicle’scomputer controlled systems, suchas your airbags and anti-lock brakes.

Your dealer has Honda accessoriesthat allow you to personalize yourvehicle. These accessories havebeen designed and approved for yourvehicle, and are covered by warranty.

Modifying your vehicle, or installingsome non-Honda accessories, canmake it unsafe. Before you make anymodifications or add any accessories,be sure to read the followinginformation.

Before installing any accessory:

Make sure the accessory does notobscure any lights, or interferewith proper vehicle operation orperformance.

Although non-Honda accessoriesmay fit on your vehicle, they may notmeet factory specifications, andcould adversely affect your vehicle’shandling and stability.

Be sure electronic accessories donot overload electrical circuits(see page ) or interfere withproper the operation of yourvehicle.

Before installing any electronicaccessory, have the installercontact your dealer for assistance.If possible, have your dealerinspect the final installation.

212

Accessories

Accessories and Modifications

130

Improper accessories ormodifications can affect yourvehicle’s handling, stability, andperformance, and cause acrash in which you can be hurtor killed.

Follow all instructions in thisowner’s manual regardingaccessories and modifications.

０５／０９／１３　１９：５７：１７　３１ＳＣＶ６３０　０１３５　

Some examples are:

Larger or smaller wheels and tirescan interfere with the operation ofyour vehicle’s anti-lock brakes andother systems.

If you plan to modify your vehicle,consult your dealer.

Modifying your steering wheel orany other part of your vehicle’ssafety features can make thesystems ineffective.

Removing parts from your vehicle,or replacing components with somenon-Honda components couldseriously affect your vehicle’shandling, stability, and reliability.

Lowering the vehicle with a non-Honda suspension kit thatsignificantly reduces groundclearance can allow theundercarriage to hit speed bumpsor other raised objects, whichcould cause the airbags to deploy.

Raising your vehicle with anon-Honda suspension kit canaffect the handling and stability.

Non-Honda wheels can causeexcessive stress on suspensioncomponents.

Modifying Your Vehicle

Accessories and Modifications

Before

Driving

131

０５／０９／１３　１９：５７：２４　３１ＳＣＶ６３０　０１３６　

Your vehicle has several convenientstorage areas:

Cargo area side pocketsGlove boxCeiling pocket (U.S. EX modelsand Canadian Y package)Door pocketsSeat-back pocket (U.S. EX modelsand Canadian Y package)Cargo area (including rear seatswhen they are folded down, foldedto the side, or removed)

However, carrying too much cargo,or improperly storing it, can affectyour vehicle’s handling, stability,stopping distance, and tires, andmake it unsafe. Before carrying anytype of cargo, be sure to read thefollowing pages.

Roof rack (if installed)

Seat-back bungees (U.S. EXmodels and Canadian Y package)

Carrying Cargo

132

CARGO AREA SIDE POCKET DOOR POCKETS

CARGO AREA GLOVE BOX

CEILING POCKET

SEAT-BACK BUNGEES

SEAT-BACK POCKET

０５／０９／１３　１９：５７：３３　３１ＳＣＶ６３０　０１３７　

－ ×Steps for determining correct loadlimit:

Determine the combined weightof the driver and passengers thatwill be riding in your vehicle.

The maximum load for your vehicleis 675 lbs (308 kg). This figureincludes the total weight of alloccupants, cargo, and accessories,and the tongue load if you are towinga trailer.

Locate the statement, ‘‘thecombined weight of occupants andcargo should never exceed 675lbs’’ on your vehicle’s placard.[The placard is on the driver’sdoorjamb.]

Subtract the combined weight ofthe driver and passengers from675 pounds or 308 kilograms.

Determine the combined weightof luggage and cargo being loadedin the vehicle. That weight maynot safely exceed the availablecargo and luggage load capacity instep 4.

The resulting figure equals theavailable amount of cargo andluggage load capacity.

For example, if the maximum loadis 675 lbs and there will be four150 lb. passengers in your vehicle,the amount of available cargo and

luggage load capacity is 75 lbs.(675 600 (4 150) = 75 lbs.)

If your vehicle will be towing atrailer, the load from your trailerwill be transferred to your vehicle.Consult this manual to determinehow this reduces the availablecargo and luggage load capacity ofyour vehicle (see page ).

1.

2.

5.

6.

3.

4.

151

CONTINUED

Carrying Cargo

Load LimitsB

eforeD

riving

133

Overloading or improperloading can affect handling andstability and cause a crash inwhich you can be hurt or killed.

Follow all load limits and otherloading guidelines in thismanual.

０５／０９／１３　１９：５７：４２　３１ＳＣＶ６３０　０１３８　

In addition, the total weight of thevehicle, all passengers, accessories,cargo, and trailer tongue load mustnot exceed the Gross VehicleWeight Rating (GVWR) or the GrossAxle Weight Rating (GAWR). Bothare on a label on the driver’sdoorjamb.

Store or secure all items that couldbe thrown around and hurtsomeone during a crash.

Be sure items placed on the floorbehind the front seats cannot rollunder the seats and interfere withthe driver’s ability to operate thepedals or the proper operation ofthe seats.

Keep the glove box closed whiledriving. If it is open, a passengercould injure their knees during acrash or sudden stop.

The separation net can be used tohold back soft, lightweight itemsstored in the cargo area. Heavyitems should be properly secured onthe floor of the cargo area. The netmay not prevent heavy items frombeing thrown forward in a crash or asudden stop.

If you use an accessory roof rack,the roof rack weight limit may belower. Refer to the information thatcame with your roof rack.

If you carry any items on a roofrack, be sure the total weight ofthe rack and the items does notexceed 165 lbs (75 kg).

If you carry large items thatprevent you from closing thetailgate or the hatch, exhaust gascan enter the passenger area. Toavoid the possibility of

, follow theinstructions on page .

Distribute cargo evenly on thefloor of the cargo area, placing theheaviest items on the bottom andas far forward as possible. Tiedown items that could be thrownabout the vehicle during a crash orsudden stop.

If you fold the rear seats down,fold them up, or remove them, tiedown items that could be thrownabout the vehicle during a crash orsudden stop.

47

Carrying Cargo

Carrying Items in the PassengerCompartment Optional Separation Net

carbonmonoxide poisoning

Carrying Cargo in the Cargo Areaor on a Roof Rack

134

０５／０９／１３　１９：５７：５１　３１ＳＣＶ６３０　０１３９　

The driver’s seat-back and left rearseat-back are equipped withadjustable bungee cords to holdmedium-sized, lightweight objects.

If the cords are not installed, routeone cord through the loops as shown.To attach the hooks, press the top ofthe hook down, and slide to thedesired position, then release. Adjustas needed.

If equipped

Carrying Cargo

Seat-Back BungeeB

eforeD

riving

135

LOOP

ADJUSTABLE BUNGEE CORD

HOOK

０５／０９／１３　１９：５７：５７　３１ＳＣＶ６３０　０１４０　

136

０５／０９／１３　１９：５７：５９　３１ＳＣＶ６３０　０１４１　

This section gives you tips onstarting the engine under variousconditions, and how to operate themanual and automatic transmissions.It also includes importantinformation on parking your vehicle,the braking system, and facts youneed if you are planning to tow atrailer or drive off-highway.

........................Driving Guidelines . 138

........................Preparing to Drive . 139.......................Starting the Engine . 140

...................Manual Transmission . 141..............Automatic Transmission . 143

...........................................Parking . 147.............................Braking System . 148

...............Anti-lock Brakes (ABS) . 149...........................Towing a Trailer . 151

Off-Highway Driving..................................Guidelines . 157

Driving

Driving

137

０５／０９／１３　１９：５８：０３　３１ＳＣＶ６３０　０１４２　

Because your vehicle rides higheroff the ground, it has a high centerof gravity that can cause it to rollover if you make abrupt turns. Utilityvehicles have a significantly higherroll over rate than other types ofvehicles.

To prevent rollovers or loss ofcontrol:

Take corners at slower speedsthan you would with a passengervehicle.

Avoid sharp turns and abruptmaneuvers whenever possible.

Do not carry heavy cargo on theroof.

Do not modify your vehicle in anyway that would raise the center ofgravity.

Your vehicle is equipped with a four-wheel drive (4WD) system. Whenthe system senses a loss of front-wheel traction, it automaticallytransfers some power to the rearwheels. This gives you bettertraction and mobility.

You still need to exercise the samecare when accelerating, steering, andbraking that you would in a two-wheel drive vehicle.

Your vehicle has a higher groundclearance that allows you to travelover bumps, obstacles, and roughterrain. It also provides goodvisibility so you can anticipateproblems earlier.

Four-wheel drive models

See page for off-highway drivingguidelines.

157

Driving Guidelines

138

０５／０９／１３　１９：５８：１１　３１ＳＣＶ６３０　０１４３　

Check the seat adjustment (seepage ).

Check the adjustment of theinside and outside mirrors (seepage ).

Check the steering wheeladjustment (see page ).

Make sure the doors, hatch, andtailgate are securely closed andlocked.

Fasten your seat belt. Check thatyour passengers have fastenedtheir seat belts (see page ).

You should do the following checksand adjustments before you driveyour vehicle.

Make sure all windows, mirrors,and outside lights are clean andunobstructed. Remove frost, snow,or ice.

When you start the engine, checkthe gauges and indicators in theinstrument panel (see page ).

Check that the hood is fully closed.

Visually check the tires. If a tirelooks low, use a gauge to check itspressure.

Check that any items you may becarrying with you inside are storedproperly or fastened downsecurely.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

73

8215

53

64

Preparing to Drive

Driving

139

０５／０９／１３　１９：５８：２１　３１ＳＣＶ６３０　０１４４　

Apply the parking brake.

In cold weather, turn off allelectrical accessories to reducethe drain on the battery.

Push the clutch pedal down all theway.

Make sure the shift lever is inPark. Press on the brake pedal.

Without touching the acceleratorpedal, turn the ignition key to theSTART (III) position. Do not holdthe key in the START (III)position for more than 15 secondsat a time. If the engine does notstart right away, pause for at least10 seconds before trying again.

If the engine does not start within15 seconds, or starts but stallsright away, repeat step 4 with theaccelerator pedal pressed halfwaydown. If the engine starts, releasepressure on the accelerator pedalso the engine does not race.

If the engine fails to start, pressthe accelerator pedal all the waydown, and hold it there whilestarting to clear flooding. If theengine still does not start, returnto step 5.

1.

2.

3.

4.

6.

5.

Manual transmission:

Automatic transmission:

66

Starting the Engine

140

The engine is harder to start in coldweather. Also, the thinner air f ound ataltitudes above 8,000 f eet (2,400meters) adds to this problem.

The immobilizer system protects yourvehicle f rom thef t. If an improperly-coded key (or other device) is used, theengine’s f uel system is disabled. Formore inf ormation, see page .

０５／０９／１３　１９：５８：３０　３１ＳＣＶ６３０　０１４５　

When slowing down, you can getextra braking from the engine byshifting to a lower gear. This extrabraking can help you maintain a safespeed and prevent your brakes fromoverheating while going down asteep hill. Before downshifting,make sure the engine speed will notgo into the tachometer’s red zone inthe lower gear.

The manual transmission issynchronized in all forward gears forsmooth operation. It has a lockout soyou cannot shift directly from fifth toreverse. When shifting up or down,make sure you push the clutch pedaldown all the way, shift to the nextgear, and let the pedal up gradually.When you are not shifting, do notrest your foot on the clutch pedal.This can cause your clutch to wearout faster.

Come to a full stop before you shiftinto reverse. You can damage thetransmission by trying to shift intoreverse with the vehicle moving.Push down the clutch pedal, andpause for a few seconds beforeshifting into reverse, or shift into oneof the forward gears for a moment.This stops the gears so they won’t‘‘grind.’’

Manual Transmission

Driving

141

Rapid slowing or speeding-upcan cause loss of control onslippery surfaces. If you crash,you can be injured.

Use extra care when driving onslippery surfaces.

０５／０９／１３　１９：５８：３５　３１ＳＣＶ６３０　０１４６　

Normal acceleration

15 mph (24 km/h)25 mph (40 km/h)40 mph (64 km/h)48 mph (77 km/h)

Shift up

1st to 2nd2nd to 3rd3rd to 4th4th to 5th

If you exceed the maximum speedfor the gear you are in, the enginespeed will enter into the tachometer’sred zone. If this occurs, you may feelthe engine cut in and out. This iscaused by a limiter in the engine’scomputer controls. The engine willrun normally when you reduce therpm below the red zone.

Before downshifting, make sure theengine will not go into thetachometer’s red zone.

Drive in the highest gear that letsthe engine run and acceleratesmoothly. This will give you goodfuel economy and effectiveemissions control. The followingshift points are recommended:

Recommended Shift Points Engine Speed Limiter

Manual Transmission

142

０５／０９／１３　１９：５８：４０　３１ＳＣＶ６３０　０１４７　

－These indicators on the instrumentpanel show which position the shiftlever is in.

To shift from any position, pressfirmly on the brake pedal, push therelease button, and pull the levertoward you. You cannot shift out ofPark when the ignition switch is inthe LOCK (0) or ACCESSORY (I)position.

This position mechani-cally locks the transmission. UsePark whenever you are turning off orstarting the engine. To shift out ofPark, you must press on the brakepedal and have your foot off theaccelerator pedal.

If you have done all of the above andstill cannot move the lever out ofPark, see onpage .

The ‘‘D’’ indicator comes on for afew seconds when you turn theignition switch to the ON (II)position. If it flashes while driving (inany shift position), it indicates apossible problem in the transmission.Avoid rapid acceleration, and havethe transmission checked by yourdealer as soon as possible.

146CONTINUED

To shift from:P to R

R to NN to DD to 22 to 11 to 22 to DD to NN to RR to P

Do this:Press the brake pedal, andpress the release button.

Press the release button.

Move the lever.

Shift Lever Position Indicators Shifting

Park (P)

Shift Lock Release

Automatic Transmission

Driving

143

SHIFT LEVER

０５／０９／１３　１９：５８：４９　３１ＳＣＶ６３０　０１４８　

－

－－

To avoid transmission damage, cometo a complete stop before shiftinginto Park. The shift lever must be inPark before you can remove the keyfrom the ignition switch.

Use this position foryour normal driving. Thetransmission automatically selects asuitable gear for the vehicle speedand acceleration. You may notice thetransmission shifting up at higherspeeds when the engine is cold. Thishelps the engine warm up faster.

Press the brakepedal and press the release button toshift from Park to reverse. To shiftfrom reverse to neutral, come to acomplete stop, and then shift.

Your vehicle has a reverse lockout soyou cannot accidentally shift toreverse when the vehicle speedexceeds 5 mph (8 km/h).

If you cannot shift to reverse whenthe vehicle is stopped, press thebrake pedal and slowly shift toneutral. Then press the releasebutton, and shift to reverse.

If there is a problem in the reverselockout system, or your vehicle’sbattery is disconnected or goes dead,you cannot shift to reverse. (Refer to

on page ).

Use neutral if youneed to restart a stalled engine, or ifit is necessary to stop briefly withthe engine idling. Shift to the Parkposition if you need to leave yourvehicle for any reason. Press on thebrake pedal when you are movingthe shift lever from neutral toanother gear.

146


Drive (D)

Reverse (R)

Shift Lock Release

Neutral (N)

144

０５／０９／１３　１９：５８：５６　３１ＳＣＶ６３０　０１４９　

－

－

This position locksthe transmission in second gear. Itdoes not downshift to first gearwhen you come to a stop.

This position locks thetransmission in first gear. Byupshifting and downshifting through1, 2, and D, you can operate thistransmission much like a manualtransmission without a clutch pedal.

For more power when climbing.To increase engine braking whengoing down steep hills.For starting out on a slipperysurface or in deep snow.To help reduce wheel spin.When driving downhill with atrailer.

If you exceed the maximum speedfor the gear you are in, the enginespeed will enter into the tachometer’sred zone. If this occurs, you may feelthe engine cut in and out. This iscaused by a limiter in the engine’scomputer controls. The engine willrun normally when you reduce therpm below the red zone.

Overdrive (O/D) is on whenever youturn the ignition to ON (II). Pressthe O/D switch on the side of theshift lever to turn it off; the O/DOFF indicator comes on.

Overdrive can be turned on or offonly when the ignition switch is inthe ON (II) position.

When overdrive is off, thetransmission selects only the firstthree gears. Use it to provide enginebraking when going down a steep hill,or to keep the transmission fromcycling between third and fourthgear in stop-and-go driving.

Use second gear:

If you shift into first when thevehicle speed is above 31 mph (50km/h), the transmission shifts intosecond gear first to avoid suddenengine braking.


Overdrive (O/D) Mode

Second (2)

First (1)

Engine Speed Limiter

Driving

145

０５／０９／１３　１９：５９：０７　３１ＳＣＶ６３０　０１５０　

Do this if pushing on the brake pedaland pulling the shift lever does notshift the transmission out of Park:

Set the parking brake.

Make sure the ignition switch is inthe LOCK (0) position.

To release the reverse lockout,make sure the ignition switch is inthe ACCESSORY(I) position.

Put a cloth on the edge of the shiftlock release slot cover next to theshift lever. Using a flatheadscrewdriver, carefully pry on theedge of the cover to remove it.

Insert the flat-tip screwdriver intothe shift lock release slot.

Remove the screwdriver from theshift lock release slot, then replacethe cover. Make sure the notch onthe cover is on the right side.Press the brake pedal and restartthe engine.

Push down on the screwdriverwhile you press the release buttonand move the shift lever out ofPark to neutral.

To release the reverse lockout,move the shift lever from neutralto reverse, then to Park.

If you need to use the shift lockrelease, it means your vehicle isdeveloping a problem. Have itchecked by your dealer.

1.

2.

3.4.

5.

6.


Shift Lock Release

146

COVER

SHIFT LOCK RELEASE SLOT

０５／０９／１３　１９：５９：１７　３１ＳＣＶ６３０　０１５１　

Always use the parking brake whenyou park your vehicle. Make surethe parking brake is set firmly, oryour vehicle may roll if it is parkedon an incline.

If your vehicle has an automatictransmission, set the parking brakebefore you put the transmission inPark. This keeps the vehicle frommoving and putting pressure on theparking mechanism in thetransmission.

Make sure the windows are closed.

Turn off the lights.

Place any packages, valuables, etc.in the cargo area or take themwith you.

Lock the doors and the hatch withthe key.

Never park over dry leaves, tallgrass, or other flammablematerials. The hot three waycatalytic converter could causethese materials to catch on fire.

If the vehicle is facing uphill, turnthe front wheels away from thecurb. If you have a manualtransmission, put it in first gear.

Make sure the parking brake isfully released before driving away.Driving with the parking brakepartially set can overheat ordamage the rear brakes.

If the vehicle is facing downhill,turn the front wheels toward thecurb. If you have a manualtransmission, put it in reverse gear.

Parking Tips

Parking

Driving

147

０５／０９／１３　１９：５９：２６　３１ＳＣＶ６３０　０１５２　

Constant application of the brakeswhen going down a long hill buildsup heat and reduces their effective-ness. Use the engine to assist thebrakes by taking your foot off theaccelerator and downshifting to alower gear.

The hydraulic system that operatesthe brakes has two separate circuits.Each circuit works diagonally acrossthe vehicle (the left-front brake isconnected with the right-rear brake,etc.). If one circuit should develop aproblem, you will still have brakingat two wheels.Check the brakes after driving

through deep water. Apply thebrakes moderately to see if they feelnormal. If not, apply them gently andfrequently until they do. Be extracautious in your driving.

Resting your foot on the pedal keepsthe brakes applied lightly, builds upheat, and reduces their effectiveness.It also keeps your brake lights on allthe time, confusing drivers behindyou.

Your vehicle is equipped with discbrakes at all four wheels. A powerassist helps reduce the effort neededon the brake pedal. The anti-lockbrake system (ABS) helps you retainsteering control when braking veryhard.

Braking System Design

Braking System

148

０５／０９／１３　１９：５９：３１　３１ＳＣＶ６３０　０１５３　

If the brake pads need replacing, youwill hear a distinctive, metallicscreeching sound when you applythe brake pedal. If you do not havethe brake pads replaced, they willscreech all the time. It is normal forthe brakes to occasionally squeal orsqueak when you apply them.

The anti-lock brake system (ABS)helps prevent the brakes fromlocking up, and helps you retainsteering control by pumping thebrakes rapidly, much faster than aperson can do it.

The ABS also balances the front-to-rear braking distribution accordingto vehicle loading.

Let the ABS work for you by alwayskeeping firm, steady pressure on thebrake pedal. This is sometimesreferred to as ‘‘stomp and steer.’’

You will feel a pulsation in the brakepedal when the ABS activates, andyou may hear some noise. This isnormal: it is the ABS rapidlypumping the brakes. On drypavement, you will need to press onthe brake pedal very hard before theABS activates. However, you mayfeel the ABS activate immediately ifyou are trying to stop on snow or ice.

You should never pump the brake pedal.

Brake Wear Indicators Anti-lock Brakes

Braking System, Anti-lock Brakes (ABS)

Driving

149

０５／０９／１３　１９：５９：３７　３１ＳＣＶ６３０　０１５４　

Test your brakes as instructed onpage . If the brakes feel normal,drive slowly and have your vehiclerepaired by your dealer as soon aspossible. Avoid sudden hard brakingwhich could cause the rear wheels tolock up and possibly lead to a loss ofcontrol.

If this indicator comes on, the anti-lock function of the braking systemhas shut down. The brakes still worklike a conventional system, butwithout anti-lock. You should haveyour dealer inspect your vehicle assoon as possible.

If the indicator comes on whiledriving, test the brakes as instructedon page .

If the ABS indicator and the brakesystem indicator come on togetherand the parking break is fullyreleased, the front-to-rear brakingdistribution system may also shutdown.

It only helps with steeringcontrol during braking.

such as trying to take acorner too fast or making a suddenlane change.

Always steer moderatelywhen you are braking hard. Severeor sharp steering wheel movementcan still cause your vehicle to veerinto oncoming traffic or off the road.

on loose oruneven surfaces, such as gravel orsnow, than a vehicle without anti-lock.

211

55

Anti-lock Brakes (ABS)

ABS Indicator

ABS does not reduce the time ordistance it takes to stop thevehicle.

ABS will not prevent a skid thatresults from changing directionabruptly,

ABS cannot prevent a loss ofstability.

A vehicle with ABS may require alonger distance to stop

Important Safety Reminders

150

０５／０９／１３　１９：５９：４４　３１ＳＣＶ６３０　０１５５　

Your vehicle has been designed toprimarily carry passengers and theircargo. You can also use it to tow atrailer if you carefully observe theload limits, use the proper equipment,and follow the guidelines in thissection.

The weight thatthe tongue of a fully-loaded trailerputs on the hitch should beapproximately 10 % of the totaltrailer weight. Too much tongueload reduces front-tire traction andsteering control. Too little tongueload can make the trailer unstableand cause it to sway.

Be sure to read theon page

if you plan to tow off pavedsurfaces.

Themaximum allowable weight of thetrailer and everything in or on itmust not exceed 1,500 lbs (680 kg).Towing a trailer that is too heavycan seriously affect your vehicle’shandling and performance. It canalso damage the engine anddrivetrain.

157

Driving Off-Highway Guidelines section

CONTINUED

Load Limits

Tongue Load:Total Trailer Weight:

Towing a Trailer

Driving

151

Exceeding any load limit orimproperly loading your vehicleand trailer can cause a crash inwhich you can be seriously hurtor killed.

Check the loading of yourvehicle and trailer carefullybefore starting to drive.

０５／０９／１３　１９：５９：５２　３１ＳＣＶ６３０　０１５６　

To achieve a proper tongue load,start by loading 60 % of the loadtoward the front of the trailer and40 % toward the rear, then re-adjustthe load as needed.

The best way to confirm that vehicleand trailer weights are within limitsis to have them checked at a publicscale.

Using a suitable scale or a specialtongue load gauge, check the tongueload the first time you set up atowing combination (a fully-loadedvehicle and trailer), then recheck thetongue load whenever the conditionschange.

The maximum allowable weight ofthe vehicle axles is:

The maximum allowable weight ofthe vehicle, all occupants, all cargo,and tongue load is:

on the front axle

on the rear axle

Checking LoadsGross Axle Weight Rating(GAWR):

Gross Vehicle Weight Rating(GVWR):

Towing a Trailer

152

4,450 Ibs (2,020 kg)

2,300 Ibs (1,045 kg)

2,205 Ibs (1,000 kg)

０５／０９／１３　１９：５９：５８　３１ＳＣＶ６３０　０１５７　

Honda recommends that any trailerhaving a total weight of 1,000 lbs(450 kg) or more be equipped withits own electric or surge-type brakes.

If you choose electric brakes, besure they are electrically actuated.Do not attempt to tap into yourvehicle’s hydraulic system. Nomatter how successful it may seem,any attempt to attach trailer brakesto your vehicle’s hydraulic systemwill lower braking effectiveness andcreate a potential hazard.

See your trailer dealer for moreinformation on installing electricbrakes.

Any hitch used on your vehicle mustbe properly bolted to the underbody.

Always use safety chains when youtow a trailer. Make sure the chainsare secured to the trailer and hitch,and that they cross under the tongueand can catch the trailer if itbecomes unhitched. Leave enoughslack to allow the trailer to turncorners easily, but do not let thechains drag on the ground.

Towing can require a variety ofequipment, depending on the size ofyour trailer, how it will be used, howmuch load you are towing, andwhere you tow. To ensure thehighest quality equipment, purchaseHonda equipment whenever possible.

Discuss your needs with your trailersales or rental agency, and follow theguidelines in the rest of this section.Also make sure that all equipment isproperly installed and that it meetsfederal, state, province, and localregulations.

CONTINUED

Towing Equipment andAccessories

Trailer BrakesHitches

Safety Chains

Towing a Trailer

Driving

153

０５／０９／１３　２０：００：０７　３１ＳＣＶ６３０　０１５８　

Many states and Canadian provincesrequire special outside mirrors whentowing a trailer. Even if they don’t,you should install special mirrors ifyou cannot clearly see behind you, orif the trailer creates a blind spot.

Ask your trailer sales or rentalagency if any other items arerecommended or required for yourtowing situation.

Since lighting and wiring vary bytrailer type and brand, you shouldhave a qualified technician install asuitable connector between thevehicle and the trailer. Improperequipment or installation can causedamage to your vehicle’s electricalsystem and affect your vehiclewarranty.

Trailer lights and equipment mustcomply with federal, state, and localregulations. Check with your trailersales or rental agency for therequirements in your area, and useonly equipment designed for yourvehicle.

Trailer Lights Additional Towing Equipment

Towing a Trailer

154

０５／０９／１３　２０：００：１２　３１ＳＣＶ６３０　０１５９　

When preparing to tow, and beforedriving away, be sure to check thefollowing:

The vehicle has been properlyserviced, and the tires, brakes,suspension, cooling system, andlights are in good operatingcondition.

Your vehicle tires and spare areproperly inflated (see page ),and the trailer tires and spare areinflated as recommended by thetrailer maker.

The added weight, length, andheight of a trailer will affect yourvehicle’s handling and performance,so driving with a trailer requiressome special driving skills andtechniques.For your safety and the safety ofothers, take time to practice drivingmaneuvers before heading for theopen road, and follow the guidelinesbelow.

All weights and loads are withinlimits (see pages and ).

The trailer has been properlyserviced and is in good condition.

Drive slower than normal in alldriving situations, and obey postedspeed limits for vehicles with trailers.If you have an automatictransmission, use overdrive (O/D)when towing a trailer on level roads.Turn off the overdrive (O/D) whentowing a trailer in hilly terrain.

The hitch, safety chains, and anyother attachments are secure.

All items in or on the trailer areproperly secured and cannot shiftwhile you drive.

187

152151

CONTINUED

Pre-Tow Checklist Driving Safely With a Trailer

Towing a Trailer

Towing Speeds and Gears

Driving

155

０５／０９／１３　２０：００：２２　３１ＳＣＶ６３０　０１６０　

Make turns more slowly and widerthan normal. The trailer tracks asmaller arc than your vehicle, and itcan hit or run over something thevehicle misses. Allow more time anddistance for braking. Do not brake orturn suddenly as this could cause thetrailer to jackknife or turn over.

When climbing hills, closely watchyour temperature gauge. If it nearsthe red (Hot) mark, turn the airconditioning off, reduce speed and, ifnecessary, pull to the side of theroad to let the engine cool.

If the automatic transmission shiftsfrequently between 3rd and 4thgears while going up a hill, turn offthe overdrive (O/D) (see page ).

If you must stop when facing uphill,use the foot brake or parking brake.Do not try to hold the vehicle inplace by pressing on the accelerator,as this can cause the automatictransmission to overheat.

When driving down hills, reduceyour speed and shift down to 3rdgear (manual transmission) or turnoff the overdrive (O/D) (automatictransmission). Do not ‘‘ride’’ thebrakes, and remember it will takelonger to slow down and stop whentowing a trailer.

Crosswinds and air turbulencecaused by passing trucks can disruptyour steering and cause trailer tosway. When being passed by a largevehicle, keep a constant speed, andsteer straight ahead. Do not try tomake quick steering or brakingcorrections.

Always drive slowly and havesomeone guide you when backing up.Grip the of the steeringwheel; then turn the wheel to the leftto get the trailer to move to the left,and turn the wheel right to move thetrailer to the right.

Follow all normal precautions whenparking, including firmly setting theparking brake and putting thetransmission in Park (automatic) orin 1st or reverse (manual). Also,place wheel chocks at each of thetrailer’s tires.

145

bottom

Towing a Trailer

Making Turns and Braking

Driving on Hills

Handling Crosswinds and Buffeting

Backing Up

Parking

156

０５／０９／１３　２０：００：３１　３１ＳＣＶ６３０　０１６１　

To avoid loss of control or rollover,be sure to follow all precautions andrecommendations.

Be sure to store cargo properly,and do not exceed your vehiclecargo load limits (see pages

and ).

Wherever you drive, make sureyou and your passengers alwayswear seat belts.

Keep your speed low, and nevergo faster than the conditions allow.

It’s up to you to continually assessthe situation and drive within thelimits.

Your vehicle has been designedprimarily for use on pavement. Butits higher ground clearance allowsyou to occasionally travel on unpavedroads, to campgrounds, picnic sites,and similar locations. It is notdesigned for trail-blazing, mountainclimbing, or other challenging off-road activities.

If you decide to drive on unpavedroads, you will find that it requiressomewhat different driving skills.Your vehicle will also handlesomewhat differently than it does onpavement. So be sure to read thisowner’s manual, pay special attentionto the precautions and tips in thissection, and get acquainted withyour vehicle before you leave thepavement.

133 151

General Information Important Safety Precautions

Off-Highway Driving Guidelines

Driving

157

Improperly operating thisvehicle on or off-pavement cancause an accident or rollover inwhich you and your passengerscould be seriously injured orkilled.

Follow all instructions andguidelines in this owner’smanual.Keep your speed low, anddon’t drive faster thanconditions permit.

０５／０９／１３　２０：００：３９　３１ＳＣＶ６３０　０１６２　

Before you leave the pavement, besure to do all scheduled maintenanceand service, and inspect your vehiclefor any problems. Pay specialattention to the condition of the tires,and check the tire pressures.

After you return to the pavement,carefully inspect your vehicle tomake sure there is no damage thatcould make driving it unsafe.Recheck the condition of the tiresand the tire pressures.

The route presents limits (too steepor bumpy roads). You have limits(driving skill and comfort). And yourvehicle has limits (traction, stability,and power).

Driving off-highway can behazardous if you fail to recognizelimits and take the properprecautions.

For better traction on all surfaces,accelerate slowly and gradually buildup speed. If you try to start too faston wet soil, mud, snow, or ice, youmight not have enough traction toget underway, and you may digyourself a hole. Starting with theshift lever in second (2) gear willhelp you have a smoother start onsnow or ice.

Keep in mind that you will usuallyneed more time and distance tobrake to a stop on unpaved surfaces.Avoid hard braking. Do not ‘‘pump’’the brakes; let the anti-lock brakingsystem pump them for you.

Debris in the road can damage yoursuspension or other components.Because your vehicle has a highcenter of gravity, driving over a largeobstacle, or allowing a wheel to dropinto a deep hole can cause yourvehicle to tip or roll over.

If you can’t clearly see all conditionsor obstacles on a slope, walk theslope before you drive on it. If youhave any doubt whether or not youcan safely drive on the slope, don’tdo it. Find another route.

If you are driving up a hill and findthat you cannot continue,

. Your vehicle could rollover. Slowly back down the hill,following the same route you took upthe hill.

do not try toturn around


Check Out Your Vehicle

Remember

Accelerating and Braking Avoiding Obstacles

Driving on Slopes

158

０５／０９／１３　２０：００：４９　３１ＳＣＶ６３０　０１６３　

Avoid driving through deep water. Ifyou encounter water in your route (asmall stream or large puddle, forexample), evaluate it carefully beforegoing ahead. Make sure it is shallow,flowing slowly, and has firm groundunderneath. If you are not sure ofthe depth or the ground, turn aroundand find another route.

Driving through deep water can alsodamage your vehicle. The water canget into the transmission anddifferential, diluting the lubricantand causing an eventual failure. Itcan also wash the grease out of thewheel bearings.

Avoid driving on soft sand, deep mud,or other surfaces where you couldget stuck. If you do happen to getstuck because of inclement weatheror other conditions, choose a safeand appropriate course of action.

You should never use a jack to trygetting unstuck. A jack only workson firm, level ground. Also, yourvehicle could easily slip off the jackand hurt you or someone else.

If you spin the wheels excessivelytrying to get unstuck, you mayoverheat the components of the4-wheel drive system. If this happens,the 4-wheel drive system shuts offand only the front wheels receivepower. If this happens, stop andallow everything to cool down. The4-wheel drive system will work againafter its temperature drops.

If you slip the clutch for a long timewhile trying to get unstuck, you mayoverheat and damage it.


If You Get StuckCrossing a Stream 4-Wheel Drive VehiclesD

riving

159

０５／０９／１３　２０：００：５６　３１ＳＣＶ６３０　０１６４　

160

０５／０９／１３　２０：００：５７　３１ＳＣＶ６３０　０１６５　

This section explains why it isimportant to keep your vehicle wellmaintained and how to follow basicmaintenance safety precautions.

This section also includesmaintenance schedules for normaldriving and severe driving conditions,a maintenance record, andinstructions for simple maintenancetasks you may want to take care ofyourself.

If you have the skills and tools toperform more complex maintenancetasks on your vehicle, you may wantto purchase the service manual. Seepage for information on how toobtain a copy, or see your dealer.

......................Maintenance Safety . 162.................Maintenance Schedule . 163

....................Maintenance Record . 167..............................Fluid Locations . 169

........................Adding Engine Oil . 170.........Changing the Oil and Filter . 171

..............................Engine Coolant . 173....................Windshield Washers . 174

....Automatic Transmission Fluid . 175.......Manual Transsmission Fluid . 176

................Brake and Clutch Fluid . 177....................Power Steering Fluid . 178

............Cleaning the Body Panels . 178.............................................Lights . 179

................Cleaning the Seat Belts . 185..................Dust and Pollen Filter . 185

.................................Wiper Blades . 186...............................................Tires . 187

...................Checking the Battery . 193.............................Vehicle Storage . 194

237

Maintenance

Maintenance

161

０５／０９／１３　２０：０１：０２　３１ＳＣＶ６３０　０１６６　

To eliminate potential hazards, readthe instructions before you begin,and make sure you have the toolsand skills required.

To clean parts, use a commerciallyavailable degreaser or partscleaner, not gasoline.

To reduce the possibility of fire orexplosion, keep cigarettes, sparks,and flames away from the batteryand all fuel-related parts.

Wear eye protection andprotective clothing when working

with the battery or compressed air.

Be sure there isadequate ventilation whenever youoperate the engine.

Let theengine and exhaust system cooldown before touching any parts.

Donot run the engine unlessinstructed to do so.

Some of the most important safetyprecautions are given here. However,we cannot warn you of everyconceivable hazard that can arise inperforming maintenance. Only youcan decide whether or not youshould perform a given task.

Make sure your vehicle is parkedon level ground, the parking brakeis set, and the engine is off.

All service items not detailed in thissection should be performed by acertified technician or other qualifiedmechanic.

Maintenance Safety

Important Safety Precautions

Potential Vehicle HazardsCarbon Monoxide poison fromengine exhaust.

Burns from hot parts.

Injury from moving parts.

162

Failure to properly followmaintenance instructions andprecautions can cause you tobe seriously hurt or killed.

Always follow the proceduresand precautions in this owner’smanual.

Improperly maintaining thisvehicle or failing to correct aproblem before driving cancause a crash in which you canbe seriously hurt or killed.

Always follow the inspectionand maintenancerecommendations, andschedules in this owner’smanual.

０５／０９／１３　２０：０１：１２　３１ＳＣＶ６３０　０１６７　

－

－

Avoid exceeding your vehicle’sload limit. This puts excess stresson the engine, brakes, and manyother vehicle parts. The load limitis shown on the tire informationlabel on the driver’s doorjamb.

Driving less than 5 miles (8 km)per trip, or in freezingtemperatures, driving less than 10miles (16 km) per trip.

Driving in extremely hot [over90°F (32°C)] conditions.

Used primarily as a deliveryvehicle or taxi that is drivenmostly in stop-and-go traffic and/or parked with the engine idling.

Operate your vehicle onreasonable roads within the legalspeed limit.

Always use unleaded gasoline withthe proper octane rating (see page

).

Drive your vehicle regularly over adistance of several miles(kilometers).

The maintenance schedule assumesyou will use your vehicle as normaltransportation for passengers andtheir possessions. You should alsofollow these recommendations:

Trailer towing, driving with aloaded roof rack, or driving inmountainous conditions.

Driving on muddy, dusty, or de-iced roads.

Service your vehicle according to thetime and mileage periods on one ofthe maintenance schedules on thefollowing pages.

Follow themaintenance schedule for severeconditions if you drive your vehicleMAINLY under one or more of thefollowing conditions.

If you onlydrive under a ‘‘severe’’ condition, youshould follow the normal conditionsmaintenance schedule.

Follow themaintenance schedule for severeconditions.

124

OCCASIONALLY

Maintenance Schedule

Which Schedule to Follow

U.S. Owners

Canadian Owners

Maintenance

163

NOTE:

０５／０９／１３　２０：０１：２２　３１ＳＣＶ６３０　０１６８　

－

－

－

－

－

－

＃

We recommend the use of Hondaparts and fluids whenever you havemaintenance done.

U.S. Vehicles:You should check the followingitems at the specified intervals. Ifyou are unsure of how to performany check, turn to the appropriatepage listed.

Engine oil level Check everytime you fill the fuel tank. Seepage .Engine coolant level Check theradiator reserve tank every timeyou fill the fuel tank. See page .Automatic transmission Checkthe fluid level monthly. See page

.Brakes Check the fluid levelmonthly. See page .Tires Check the tire pressuremonthly. Examine the tread forwear and foreign objects. See page

.Lights Check the operation ofthe headlights, parking lights,taillights, high-mount brake light,and license plate lights monthly.See page .

According to state and federalregulations, failure to performmaintenance on the items markedwith will not void your emissionswarranties. However, allmaintenance services should beperformed at the recommended timeor mileage period to ensure long-term reliability.

Your authorized dealer knows yourvehicle best and can providecompetent, efficient service.However, service at a dealer is notmandatory to keep your warrantiesin effect. Maintenance may be doneby any qualified service facility orskilled person to keep yourwarranties in effect. Keep all thereceipts as proof of completion, andhave the person who does the workfill out the maintenance record.Check your warranty booklet formore information. 175

177

188

179

128

128

Maintenance Schedule

Servicing Your VehicleMaintenance, replacement, orrepair of emissions controldevices and systems may be doneby any automotive repairestablishment or individual usingparts that are ‘‘certif ied’’ to EPAstandards.

Owner’s Maintenance Checks

164

０５／０９／１３　２０：０１：３２　３１ＳＣＶ６３０　０１６９　

＊＃

＃

＃

＊

Follow the normal maintenanceschedule if the severe drivingconditions specified in the severeconditions maintenance schedule onthe next page do not apply.

NOTE: If you only OCCASIONALLYdrive under a ‘‘severe’’ condition, youshould follow the normal conditionsmaintenance schedule.

165

miles x 1,000km x 1,000

Service the items listed at the indicated distance (or time, if given).

Every 3 years (independent of mileage)

((OOrr eevveerryy 66 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))

Every 10,000 miles (16,000 km)((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

Check inflation and condition once a monthCheck oil and coolant at each fuel stop

1016

2032

3048

4064

5080

6096

70112

80128


Replace at 120,000 miles (192,000 km) or 6 years, then every 90,000 miles (144,000 km) or 5 years.

((OOrr eevveerryy 11 yyeeaarr,, wwhhiicchheevveerr ccoommeess ffiirrsstt))

((OOrr eevveerryy 55 yyeeaarrss,, wwhhiicchheevveerr ccoommeess ffiirrsstt))Every 160,000 miles (256,000 km)

At 120,000 miles (192,000 km) or 10 years, thenevery 60,000 miles (96,000 km) or 5 years

150240

140224

130208

120192

110176

100160

90144

Check engine oil and coolantCheck tiresReplace engine oil

Rotate tires (follow pattern on page 190 )Replace engine oil filterCheck front and rear brakesCheck parking brake adjustmentInspect the following items:

Tie-rod ends, steering gearbox, and bootsSuspension componentsDriveshaft bootsBrake hoses and lines (including ABS)All fluid levels and condition of fluidsExhaust systemFuel lines and connections

Inspect drive beltsReplace dust and pollen filterReplace air cleaner elementReplace spark plugsInspect valve clearance

Replace automatic transmission fluidReplace manual transmission fluid

Replace rear differential fluid

Inspect idle speedReplace engine coolant

Replace brake fluid

See information on maintenance and emissions warranty on page .1:: 164

1

Main

ten

an

ceS

ched

ule

for

No

rmalC

on

ditio

ns

０５／０９／１３　２０：０１：５２　３１ＳＣＶ６３０　０１７０　

－

＊

＊

＃

＃＃

＊

＊

Driving less than 5 miles (8 km) pertrip or, in freezing temperatures,driving less than 10 miles (16 km)per trip.Driving in extremely hot [over 90°F(32°C)] conditions.

Driving on muddy, dusty, or de-icedroads.

Extensive idling or long periods ofstop and go driving, such as a taxi ora commercial delivery vehicle.

Follow the severe maintenanceschedule if you drive your vehicleMAINLY under one or more of thefollowing conditions:

Trailer towing, driving with a loadedroof rack, or driving in mountainousconditions.

166

Canadian Owners

miles x 1,000km x 1,000

Every 3 years (independent of mileage)


((OOtthheerrwwiissee aaddjjuusstt oonnllyy iiff nnooiissyy))


1016

5080

70112

Check oil and coolant at each fuel stop

150240

Service the items listed at the indicated distance (or time, if given).

Every 10,000 miles (16,000 km)

Check inflation and condition once a monthEvery 5,000 miles (8,000 km) or every 6 months,

whichever comes first



4064

2032

6096

80128

3048

Every 160,000 miles (256,000 km)At 120,000 miles (192,000 km) or 10 years, then

every 60,000 miles (96,000 km) or 5 years


Replace at 60,000 miles (96,000 km) or 3

years, then every 30,000 miles (48,000

km) or 2 years.

90144

100160

140224

130208

120192

110176

Every 15,000 miles (24,000 km)(Use normal schedule except in dusty condition)

Check engine oil and coolantCheck tiresReplace engine oil

Rotate tires (follow pattern on page 190 )Replace engine oil filterCheck front and rear brakesLubricate all hinges, locks and latchesInspect the following items:

Tie rod ends, steering gearbox, and bootsSuspension components, driveshaft boots

Check parking brake adjustmentInspect the following items:

Brake hoses and lines (including ABS)All fluid levels and condition of fluidsExhaust system , fuel lines and connectionsLights and controls/vehicle underbody

Inspect drive beltsReplace dust and pollen filterReplace air cleaner element

Replace spark plugsInspect valve clearance

Replace automatic transmission fluidReplace manual transmission fluid

Replace rear differential fluid

Inspect idle speedReplace engine coolant

Replace brake fluid

Follow the maintenance

schedule for severe conditions.

See dust and pollen filter on page for

replacement information under special

driving conditions.

See information on maintenance and

emissions warranty on page .

1 :

2 :

:

185

164

1

2

Main

ten

an

ceS

ched

ule

for

Severe

Co

nd

itio

ns

０５／０９／１３　２０：０２：１８　３１ＳＣＶ６３０　０１７１　

(for Normal and Severe Schedules)Maintenance Record

Maintenance

167

5,000 mi

10,000 mi

15,000 mi

20,000 mi

25,000 mi

30,000 mi

35,000 mi

40,000 mi

45,000 mi

50,000 mi

55,000 mi

60,000 mi

65,000 mi

70,000 mi

75,000 mi

80,000 mi

8,000 km

16,000 km

24,000 km

32,000 km(or 1 year)

40,000 km

48,000 km

56,000 km

64,000 km(or 2 years)

Signature or dealer stamp72,000 km

80,000 km

88,000 km


104,000 km

112,000 km

120,000 km


Signature or dealer stamp mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page ) or severeconditions (page ). Keep the receipts for all work done on your vehicle. Maintenance can also be recorded in your Honda service history booklet.

165166

０５／０９／１３　２０：０２：２５　３１ＳＣＶ６３０　０１７２　

(for Normal and Severe Schedules)Maintenance Record

168

85,000 mi

90,000 mi

95,000 mi

100,000 mi

105,000 mi

110,000 mi

115,000 mi

120,000 mi

125,000 mi

130,000 mi

135,000 mi

140,000 mi

145,000 mi

150,000 mi

155,000 mi

160,000 mi

136,000 km

144,000 km

152,000 km


168,000 km

176,000 km

184,000 km



Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

200,000 km

208,000 km

216,000 km


232,000 km

240,000 km

248,000 km



Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

mi/km

Date

０５／０９／１３　２０：０２：３０　３１ＳＣＶ６３０　０１７３　

Fluid Locations

Maintenance

169

BRAKE FLUID(Gray cap)

AUTOMATICTRANSMISSIONFLUID DIPSTICK(Yellow loop)

RADIATOR CAP

ENGINECOOLANTRESERVOIR

WASHER FLUID(Blue cap)

ENGINE OILFILL CAP

POWERSTEERING FLUID(Red cap)

ENGINE OILDIPSTICK(Orange tab)

CLUTCH FLUID(ManualTransmission only)(Gray cap)

０５／０９／１３　２０：０２：３４　３１ＳＣＶ６３０　０１７４　

Oil is a major contributor to yourengine’s performance and longevity.Always use a premium-grade 5W-20detergent oil displaying the APIcertification seal. This seal indicatesthe oil is energy conserving, and thatit meets the American PetroleumInstitute’s latest requirements.

Honda motor oil is the preferred5W-20 lubricant for your vehicle. It ishighly recommended that you useHonda motor oil in your vehicle foroptimum engine protection. makesure the API certification seal says‘‘For Gasoline Engines.’’

The oil viscosity or weight isprovided on the container’s label.5W-20 oil is formulated for year-round protection of your vehicle toimprove cold weather starting andfuel economy.Unscrew and remove the engine oil

fill cap on top of the valve cover.Pour in the oil slowly and carefully soyou do not spill. Clean up any spillsimmediately. Spilled oil coulddamage components in the enginecompartment. Install the engine oilfill cap, and tighten it securely. Waita few minutes, and recheck the oillevel. Do not fill above the uppermark; you could damage the engine.

Recommended Engine Oil

Adding Engine Oil

170

ENGINE OIL FILL CAP

API CERTIFICATION SEAL

Ambient Temperature

０５／０９／１３　２０：０２：４２　３１ＳＣＶ６３０　０１７５　

Your vehicle does not require any oiladditives. Additives may adverselyaffect the engine or transmissionperformance and durability.

Always change the oil and filteraccording to the recommendations inthe maintenance schedule. The oiland filter collect contaminants thatcan damage your engine if they arenot removed regularly.

Changing the oil and filter requiresspecial tools and access fromunderneath the vehicle. The vehicleshould be raised on a service station-type hydraulic lift for this service.Unless you have the knowledge andproper equipment, you should havethis maintenance done by a skilledmechanic.

Open the hood, and remove theengine oil fill cap. Remove the oildrain bolt and washer from thebottom of the engine. Drain the oilinto an appropriate container.

Run the engine until it reachesnormal operating temperature,then shut it off.

You may use a synthetic motor oil ifit meets the same requirementsgiven for a conventional motor oil: itdisplays the API certification seal,and it is the proper weight. You mustfollow the oil and filter changeintervals given on the maintenanceschedule.

1.

2.

CONTINUED

Synthetic Oil

Engine Oil Additives

Changing the Oil and Filter

Adding Engine Oil, Changing the Oil and Filter

Maintenance

171

WASHER

OIL DRAIN BOLT

０５／０９／１３　２０：０２：５１　３１ＳＣＶ６３０　０１７６　

Remove the oil filter and let theremaining oil drain. A specialwrench (available from yourdealer) is required.

Install a new oil filter according tothe instructions that come with it.

Turn off the engine and let it sitfor several minutes, then checkthe oil level on the dipstick. Ifnecessary, add more oil.

Let the engine run for severalminutes, then check the drain boltand oil filter for leaks.

Replace the engine oil fill cap.Start the engine. The oil pressureindicator should go out within 5seconds. If it does not, turn off theengine, and check your work.

Refill the engine with the recom-mended oil.

Engine oil change capacity(including filter):

Put a new washer on the drain bolt,then reinstall the drain bolt.Tighten the drain bolt to:

4.

3.

5.

6.

7.

8.

9.

Changing the Oil and Filter

172

OIL FILTER

4.4 US qt (4.2 )

33 lbf·ft (44 N·m , 4.5 kgf·m)Improper disposal of engine oil can beharmf ul to the environment. If youchange your own oil, please dispose ofthe used oil properly. Put it in a sealedcontainer, and take it to a recyclingcenter. Do not discard it in a trash binor dump it on the ground.

０５／０９／１３　２０：０３：００　３１ＳＣＶ６３０　０１７７　

Make sure the oil filter gasket is not stuck to the engine block. If it is, remove it before installing a new oil filter.

If the coolant level in the reservetank is at or below the MIN line, addcoolant to bring it up to between theMIN and MAX lines. Inspect thecooling system for leaks.

If Honda antifreeze/coolant is notavailable, you may use anothermajor-brand non-silicate coolant as atemporary replacement. Make sure itis a high-quality coolantrecommended for aluminum engines.Continued use of any non-Hondacoolant can result in corrosion,causing the cooling system tomalfunction or fail. Have the coolingsystem flushed and refilled withHonda antifreeze/coolant as soon aspossible.

If the reserve tank is completelyempty, you should also check thecoolant level in the radiator.

Always use Honda Long-life Anti-freeze/Coolant Type 2. This coolantis pre-mixed with 50 percentantifreeze and 50 percent water.Never add straight antifreeze orplain water.

CONTINUED

Adding Engine Coolant

Engine Coolant

Maintenance

173

RESERVE TANK

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

０５／０９／１３　２０：０３：０７　３１ＳＣＶ６３０　０１７８　

When the radiator and engine arecool, relieve any pressure in thecooling system by turning theradiator cap counterclockwise,without pressing down.

Remove the radiator cap bypushing down and turningcounterclockwise.

The coolant level should be up tothe base of the filler neck. Addcoolant if it is low.

Pour the coolant slowly andcarefully so you do not spill any.Clean up any spill immediately; itcould damage components in theengine compartment.

Put the radiator cap back on andtighten it.

Pour coolant into the reserve tank.Fill it to halfway between the MAXand MIN marks. Put the cap backon the reserve tank.

Do not add any rust inhibitors orother additives to your vehicle’scooling system. They may not becompatible with the coolant orengine components.

Fill the reservoir with a good-qualitywindshield washer fluid. Thisincreases the cleaning capability andprevents freezing in cold weather.

Check the fluid level in thewindshield washer reservoir at leastmonthly during normal use.

The low washerlevel indicator comes on when thelevel is low (see page ).

When you refill the reservoir, cleanthe edges of the windshield wiperblades with windshield washer fluidon a clean cloth. This will help tocondition them.

3.

4.

5.

2.

1.

57

On Canadian models:

Windshield Washers

Engine Coolant, Windshield Washers

174

RADIATOR CAP

Do not use engine antif reeze or avinegar/water solution in thewindshield washer reservoir. Antif reezecan damage your vehicle’s paint, whilea vinegar/water solution can damagethe windshield washer pump. Use onlycommercially-available windshieldwasher f luid.

０５／０９／１３　２０：０３：１６　３１ＳＣＶ６３０　０１７９　

Check the fluid level with the engineat normal operating temperature.

Park the vehicle on level ground.Shut off the engine.

Remove the dipstick (yellow loop)from the transmission, and wipe itwith a clean cloth.

Insert the dipstick all the way intothe transmission securely.

Remove the dipstick and checkthe fluid level. It should bebetween the upper and lowermarks.

If the level is below the lowermark, add fluid into the filler holeto bring it to the upper mark.Pour the fluid slowly and carefullyso you do not spill any. Clean upany spill immediately; it coulddamage components in the enginecompartment.

Always use Honda ATF-Z1(automatic transmission fluid). Ifit’s not available, you may use aDEXRON

Insert the dipstick all the way backin the transmission.

The transmission should be drainedand refilled with new fluid accordingto the time and distance recommen-dations in the maintenance schedule.If you are not sure how to add fluid,contact your dealer.

3.

4.

5.

1.

2.

6.

Automatic Transmission Fluid

Maintenance

175

DIPSTICK

UPPERMARKLOWERMARK

０５／０９／１３　２０：０３：２７　３１ＳＣＶ６３０　０１８０　

III automatictransmission fluid as a temporaryreplacement. However, continueduse can affect the shift quality.Have the transmission flushed andrefilled with Honda ATF-Z1 by your dealer as soon as it is convenient.

If Honda MTF is not available, youmay use an SAE 10W-30 or 10W-40viscosity motor oil with the APICertification seal that says ‘‘FORGASOLINE ENGINES’’ as atemporary replacement. However,motor oil does not contain the properadditives, and continued use cancause stiffer shifting. Replace assoon as it is convenient.

The transmission should be drainedand refilled with new fluid accordingto the time and distance recommen-dations in the maintenance schedule.

Check the fluid level with thetransmission at normal operatingtemperature and the vehicle sittingon level ground. Remove thetransmission filler bolt, and carefullyfeel inside the bolt hole with yourfinger. The fluid level should be upto the edge of the bolt hole. If it isnot, add Honda manual transmissionfluid (MTF) until it starts to run outof the hole. Reinstall the filler bolt,and tighten it securely.

Manual Transmission Fluid

176

FILLER BOLT

Correct Level

WASHER

０５／０９／１３　２０：０３：３２　３１ＳＣＶ６３０　０１８１　

Check the brake fluid level in thereservoirs monthly.

Always use Honda Heavy DutyBrake Fluid DOT 3. If it is notavailable, you should use only DOT 3or DOT 4 fluid, from a sealedcontainer, as a temporaryreplacement.

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If the level is at orbelow the MIN mark, your brakesystem needs attention. Have thebrake system inspected for leaks orworn brake pads.

The fluid level should be betweenthe MIN and MAX marks on the sideof the reservoir. If it is not, addbrake fluid to bring it up to that level.Use the same fluid specified for thebrake system.

Replace the brake fluid according tothe time recommendation in themaintenance schedule.

Brake fluid marked DOT 5 is notcompatible with your vehicle’sbraking system and can causeextensive damage.

Using any non-Honda brake fluid cancause corrosion and decrease the lifeof the system. Have the brakesystem flushed and refilled withHonda Heavy Duty Brake FluidDOT 3 as soon as possible.

Low fluid can indicate a leak in theclutch system. Have this systeminspected as soon as possible.

Manual Transmission only

Brake and Clutch Fluid

Brake Fluid Clutch FluidM

aintenance

177

MAX

MIN

MAX

MIN

０５／０９／１３　２０：０３：４３　３１ＳＣＶ６３０　０１８２　

Always use Honda Power SteeringFluid. You may use another powersteering fluid as an emergencyreplacement, but have the powersteering system flushed and refilledwith Honda PSF as soon as possible.

Check the level on the side of thereservoir when the engine is cold.The fluid should be between theUPPER LEVEL and LOWER LEVEL.If not, add power steering fluid to theUPPER LEVEL.

A low power steering fluid level canindicate a leak in the system. Checkthe fluid level frequently, and havethe system inspected as soon aspossible.

Pour the fluid slowly and carefully soyou do not spill any. Clean up anyspill immediately; it could damagecomponents in the enginecompartment.

To clean the gray composite bodypanels, wash them with soap andwater only. Do not apply wax to thepanels; it will cause discoloration.

If equipped with body panelsPower Steering Fluid Cleaning the Body Panels

Power Steering Fluid, Cleaning the Body Panels

178

UPPER LEVEL

LOWER LEVEL

Turning the steering wheel to f ull lef tor right lock and holding it there candamage the power steering pump.

０５／０９／１３　２０：０３：５１　３１ＳＣＶ６３０　０１８３　

The headlights were properly aimedwhen your vehicle was new. If youregularly carry heavy items in thecargo area or pull a trailer,readjustment may be required.Adjustments should be done by yourdealer or other qualified mechanic.

Open the hood.If you need to change theheadlight bulb on the driver’s side,remove the front end of the airintake duct by pulling it out.

Your vehicle has halogen headlightbulbs. Handle it by its steel base andprotect the glass from contact withyour skin or hard objects. If youtouch the glass, clean it withdenatured alcohol and a clean cloth.

1.

CONTINUED

Headlight Aiming Replacing a Headlight Bulb

Lights

Maintenance

179

AIR INTAKE DUCT

Halogen headlight bulbs get very hotwhen lit. Oil, perspiration, or a scratchon the glass can cause the bulb tooverheat and shatter.

０５／０９／１３　２０：０３：５９　３１ＳＣＶ６３０　０１８４　

Remove the electrical connectorfrom the bulb by pulling theconnector straight back.

Remove the rubber weather sealby pulling on the tab.

Unclip the end of the hold-downwire from its slot. Pivot it out ofthe way, and remove the bulb.

Insert the new bulb into the hole,making sure the tabs are in theirslots. Pivot the hold-down wireback in place, and clip the end intothe slot.

Reinstall the rubber weather seal.Make sure it is right side up; it ismarked ‘‘TOP.’’

Remove the socket from theheadlight assembly by turning itone-quarter turn counterclockwise.

Push the electrical connector ontothe new bulb.

(Driver’s side)Install the front end of the airintake duct. The front parking/turn signal light

is next to the headlight bulb. Onthe driver’s side, remove the frontend of the air intake duct bypulling it out (see page ).

1.

2.

3.

4.

5.

6.

7.

8.

2.

179

Replacing a Front Parking/TurnSignal Light Bulb

Lights

180

０５／０９／１３　２０：０４：０９　３１ＳＣＶ６３０　０１８５　

Pull the bulb straight out of itssocket. Push the new bulb straightinto the socket until it bottoms.

Insert the socket back into theheadlight assembly. Turn itclockwise to lock it in place.

Test the lights to make sure thenew bulb is working.

(Driver’s side)Install the front end of the airintake duct.

Place a cloth between the trim ofthe lens and the body, at the top ofthe lens. Remove the front sidemarker light assembly by carefullyprying on the trim of the lens witha small flat-tip screwdriver.

Remove the socket from the lightassembly by turning it one-quarterturn counterclockwise.


1.

3.

4.

5.

2.

3.

6.

CONTINUED

Replacing a Front Side MarkerLight Bulb

Lights

Maintenance

181

SCREWDRIVER

CLOTH

LIGHTASSEMBLY

LIGHT ASSEMBLY

SOCKET

０５／０９／１３　２０：０４：１９　３１ＳＣＶ６３０　０１８６　

Put the socket back into the lightassembly, and turn it clockwise tolock it in place.

Turn on the lights to make surethe new bulb is working.

Put the light assembly back intothe body, bottom first. Push on thetop edge until it snaps into place.

Open the hatch and the tailgate.Remove the two mounting screwswith a Phillips-head screwdriver,and remove the taillight assemblyfrom the body by pulling it back.

Remove the socket by turning itone-quarter turn counterclockwise.


Determine which of the threebulbs is burned out: brake/taillight, turn signal light or back-up light.

1.

4.

5.

2.

3.

4.

6.

Replacing Rear Bulbs

Lights

182

TAILLIGHT ASSEMBLY

SCREW

SCREW SOCKET SOCKET

SOCKET

０５／０９／１３　２０：０４：２８　３１ＳＣＶ６３０　０１８７　

Reinstall the socket into the lightassembly by turning it clockwiseuntil it locks.

Place a cloth and insert a smallflat-tip screwdriver between theleft edge of the lens and thehousing. The lens will come down.


When reinstalling the taillightassembly, first place the two pinsin the holes in place. Tighten thetwo mounting bolts.

Pull the bulb straight out of itssocket. Push the new bulb in untilit bottoms in the socket.

Turn on the parking lights andcheck that the new bulb isworking.

Put the lens back into the lightassembly, right side first. Push onthe left edge until it snaps intoplace.

1.

2.

6.

7.

3.

4.

5.

Lights

Replacing a Rear License PlateBulb

Maintenance

183

SCREWDRIVER

CLOTH

HOUSING

LENS

LENS

BULB

０５／０９／１３　２０：０４：３６　３１ＳＣＶ６３０　０１８８　

Open the hatch. Remove the lightassembly cover by pushing in onthe tabs on both sides and pullingthe cover down.

Remove the socket from the lightassembly by turning it one-quarterturn counterclockwise.



Put the socket back into the lightassembly, and turn it clockwise tolock it in place.

Put the cover back onto the lightassembly. Push it on until it locksin place.

1.

2.

3.

4.

5.

6.

Lights

Replacing a High-mount BrakeLight Bulb

184

COVERTAB TAB BULBSOCKET

０５／０９／１３　２０：０４：４５　３１ＳＣＶ６３０　０１８９　

If your seat belts get dirty, use a softbrush with a mixture of mild soapand warm water to clean them. Donot use bleach, dye, or cleaningsolvents. Let the belts air-dry beforeyou use the vehicle.

Dirt build-up in the loops of the seatbelt anchors can cause the belts toretract slowly. Wipe the insides ofthe loops with a clean clothdampened in mild soap and warmwater or isopropyl alcohol.

This filter removes the dust andpollen that is brought in from theoutside through the heating andcooling system.

Have your dealer replace this filterevery 30,000 miles (48,000 km)under normal conditions. It shouldbe replaced every 15,000 miles(24,000 km) if you drive primarily inurban areas that have highconcentrations of soot in the air, or ifthe flow from the heating andcooling system becomes less thanusual.

Dust and Pollen FilterCleaning the Seat Belts

Cleaning the Seat Belts, Dust and Pollen Filter

Maintenance

185

LOOP

０５／０９／１３　２０：０４：５１　３１ＳＣＶ６３０　０１９０　

Disconnect the blade assemblyfrom the wiper arm by pushing inthe lock tab. Hold the lock tab inwhile you push the blade assemblytoward the base of the arm.

If you are changing the rear wiperblade, go to step 6.

Front:Raise the wiper arm off thewindshield.

Remove the blade from its holderby grasping the tabbed end of theblade. Pull firmly until the tabscome out of the holder.

Examine the new wiper blades. Ifthey have no plastic or metalreinforcement along the backedge, remove the metalreinforcement strips from the oldwiper blade, and install them inthe slots along the edge of the newblade.

Rear:Raise the wiper arm off the hatchglass and hold it.

Check the condition of the wiperblades at least every 6 months.Replace them if you find signs ofcracking in the rubber, areas that aregetting hard, or if they leave streaksand unwiped areas when used.

1.

3.

2. 4.

Wiper Blades

186

LOCK TAB

BLADE

HOLDER

Do not open the hood when the wiperarms are raised, or you will damagethe hood and the arms.

０５／０９／１３　２０：０５：００　３１ＳＣＶ６３０　０１９１　

Slide the new wiper blade into theholder until the tabs lock.

Slide the wiper blade assemblyonto the wiper arm. Make sure itlocks in place.

Lower the wiper arm down againstthe windshield or the hatch glass.

To safely operate your vehicle, yourtires must be the proper type andsize, in good condition with adequatetread, and correctly inflated.

The following pages give moredetailed information on how to takecare of your tires and what to dowhen they need to be replaced.

Keeping the tires properly inflatedprovides the best combination ofhandling, tread life, and ridingcomfort.

Underinflated tires wear unevenly,adversely affect handling and fueleconomy, and are more likely tofail from being overheated.

Overinflated tires can make yourvehicle ride more harshly, aremore prone to damage from roadhazards, and wear unevenly.

We recommend that you visuallycheck your tires everyday. If youthink a tire might be low, check itimmediately with a tire gauge.

5.

6.

7.

CONTINUED

Tires Inflation Guidelines

Wiper Blades, Tires

Maintenance

187

REINFORCEMENT

BLADE

Using tires that are excessivelyworn or improperly inflated cancause a crash in which you canbe seriously hurt or killed.

Follow all instructions in thisowner’s manual regarding tireinflation and maintenance.

０５／０９／１３　２０：０５：１１　３１ＳＣＶ６３０　０１９２　

You should get your own tirepressure gauge and use it wheneveryou check your tire pressures. Thiswill make it easier for you to tell if apressure loss is due to a tire problemand not due to a variation betweengauges.

Use a gauge to measure the airpressure in each tire at least once amonth. Even tires that are in goodcondition may lose 1 to 2 psi (10 to20 kPa, 0.1 to 0.2 kgf/cm ) permonth. Remember to check thespare tire at the same time.

If you check air pressures when thetires are hot (driven for severalmiles), you will see readings 4 to 6psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm )higher than the cold readings. Thisis normal. Do not let air out to matchthe recommended cold air pressure.The tire will be underinflated.

While tubeless tires have someability to self-seal if they arepunctured, you should look closelyfor punctures if a tire starts losingpressure.

Check the air pressures when thetires are cold. This means thevehicle has been parked for at least 3hours, or driven less than 1 mile (1.6km). Add or release air, if needed, tomatch the recommended cold tirepressures.

The following chart shows therecommended cold tire pressures formost normal driving conditions andspeed.

The compact spare tire pressure is:

For convenience, the recommendedtire sizes and cold tire pressures areon a label on the driver’s doorjamb.

For additional technical informationabout your tires, see page .224

Tire Size Cold Tire Pressurefor Normal DrivingFront:

Rear:

Recommended Tire Pressures forNormal Driving

Tires

188

60 psi (420 kPa , 4.2 kgf/cm )

P215/70R16 99S32 psi (220 kPa ,2.2 kgf/cm )

34 psi (235 kPa ,2.4 kgf/cm )

０５／０９／１３　２０：０５：２１　３１ＳＣＶ６３０　０１９３　

Every time you check inflation, youshould also examine the tires fordamage, foreign objects, and wear.

You should look for:Bumps or bulges in the tread orside of the tire. Replace the tire ifyou find either of these conditions.

Cuts, splits, or cracks in the sideof the tire. Replace the tire if youcan see fabric or cord.

Excessive tread wear.

In addition to proper inflation,correct wheel alignment helps todecrease tire wear. If you find a tireis worn unevenly, have your dealercheck the wheel alignment.

Have your dealer check the tires ifyou feel a consistent vibration whiledriving. A tire should always berebalanced if it is removed from thewheel. When you have new tiresinstalled, make sure they arebalanced. This increases ridingcomfort and tire life. For best results,have the installer perform a dynamicbalance.

Your tires have wear indicatorsmolded into the tread. When thetread wears down, you will see aband 1/2 inch (12.7 mm) wide acrossthe tread. This shows there is lessthan 1/16 inch (1.6 mm) of tread lefton the tire. A tire that is this worngives very little traction on wet roads.You should replace the tire if you cansee the tread wear indicator in threeor more places on the tire.

For vehicles with aluminum wheels:

Tire Inspection Tire Maintenance

Tires

Maintenance

189

TREAD WEAR INDICATORS

INDICATOR LOCATION MARKS

Improper wheel weights can damageyour vehicle’s aluminum wheels. Useonly genuine Honda wheel weights f orbalancing.

０５／０９／１３　２０：０５：３０　３１ＳＣＶ６３０　０１９４　

It is best to replace all four tires atthe same time. If that is not possibleor necessary, replace the two fronttires or two rear tires as a pair.Replacing just one tire can seriouslyaffect your vehicle’s handling.

If you ever replace a wheel, makesure that the wheel’s specificationsmatch those of the original wheels.Replacement wheels are available atyour dealer.

Replace your tires with radial tires ofthe same size, load range, speedrating, and maximum cold tirepressure rating (as shown on thetire’s sidewall).

Mixing radial and bias-ply tires onyour vehicle can reduce brakingability, traction, and steeringaccuracy. Using tires of a differentsize or construction can cause theABS to work inconsistently.

To help increase tire life anddistribute wear more evenly, rotatethe tires every 10,000 miles (16,000km). Move the tires to the positionsshown in the illustration each timethey are rotated. If you purchasedirectional tires, rotate only front-to-back.

Tire Rotation Replacing Tires and Wheels

Tires

190

Front Front

(Non-directional Tiresand Wheels)

(Directional Tiresand Wheels)

０５／０９／１３　２０：０５：３７　３１ＳＣＶ６３０　０１９５　

＋Wheels: Tires marked ‘‘M S’’ or ‘‘AllSeason’’ on the sidewall have an all-weather tread design suitable formost winter driving conditions.

For the best performance in snowyor icy conditions, you should installsnow tires or tire chains. They maybe required by local laws undercertain conditions.

If you mount snow tires on yourvehicle, make sure they are radialtires of the same size and load rangeas original tires. Mount snow tires onall four wheels. The tractionprovided by snow tires on dry roadsmay be lower than your original tires.Check with the tire dealer formaximum speed recommendations.

Tires:

See page for DOT tire qualitygrading information, and page

for tire size and labelinginformation.

224

226

Wheel and Tire Specifications Winter Driving

Snow Tires

Tires

Maintenance

191

16 x 6 1/2JJ16 x 6 1/2

P215/70R16 99S

Installing improper tires on yourvehicle can affect handling andstability. This can cause a crashin which you can be seriouslyhurt or killed.

Always use the size and type oftires recommended in thisowner’s manual.

０５／０９／１３　２０：０５：４６　３１ＳＣＶ６３０　０１９６　

When installing cables, follow themanufacturer’s instructions, andmount them as tight as you can.Make sure they are not contactingthe brake lines or suspension. Driveslowly with them installed. If youhear them coming into contact withthe body or chassis, stop andinvestigate. Remove them as soon asyou begin driving on cleared roads.

Because your vehicle has limited tireclearance, use only SAE Class ‘‘S’’cable-type traction devices, withrubber chain tensioners, on the fronttires. Use traction devices only whenrequired by driving conditions orlocal laws. Make sure they are thecorrect size for your tires. Metal link-type ‘‘chains’’ should not be used.

Tire Chains

Tires

192

Traction devices that are the wrongsize or improperly installed candamage your vehicle’s brake lines,suspension, body, and wheels. Stopdriving if they are hitting any part ofthe vehicle.

０５／０９／１３　２０：０５：５１　３１ＳＣＶ６３０　０１９７　

－

Check the condition of the batterymonthly by looking at the testindicator window. The label on thebattery explains the test indicator’scolors.

Check the terminals for corrosion (awhite or yellowish powder). Toremove it, cover the terminals with asolution of baking soda and water. Itwill bubble up and turn brown. Whenthis stops, wash it off with plainwater. Dry off the battery with acloth or paper towel. Coat theterminals with grease to help preventfuture corrosion.

If additional battery maintenance isneeded, see your dealer or aqualified technician.

Battery posts,terminals, and related accessoriescontain lead and lead compounds.

If you need to connect the battery toa charger, disconnect both cables toprevent damaging your vehicle’selectrical system. Always disconnectthe negative ( ) cable first, andreconnect it last.

Checking the Battery

WARNING:

Wash your hands after handling.

Maintenance

193

TEST INDICATORWINDOW

POSITIVE TERMINAL

NEGATIVE TERMINAL

The battery gives off explosivehydrogen gas during normaloperation.

A spark or flame can cause thebattery to explode with enoughforce to kill or seriously hurt you.

Wear protective clothing and aface shield, or have a skilledmechanic do the batterymaintenance.

０５／０９／１３　２０：０５：５７　３１ＳＣＶ６３０　０１９８　

Fill the fuel tank.

Change the engine oil and filter.

Wash and dry the exteriorcompletely.

Clean the interior. Make sure thecarpeting, floor mats, etc., arecompletely dry.

Block the rear wheels.

If the vehicle is to be stored for alonger period, it should besupported on jackstands so thetires are off the ground.

Cover the vehicle with a‘‘breathable’’ cover, one madefrom a porous material such ascotton. Non-porous materials, suchas plastic sheeting, trap moisture,which can damage the paint.

If you need to park your vehicle foran extended period (more than 1month), there are several things youshould do to prepare it for storage.Proper preparation helps preventdeterioration and makes it easier toget your vehicle back on the road. Ifpossible, store your vehicle indoors. Leave one window open slightly (if

the vehicle is being storedindoors).

Disconnect the battery.

Support the front and rear wiperblade arms with a folded towel orrag so they do not touch thewindshield.

To minimize sticking, apply asilicone spray lubricant to all doorand tailgate seals. Also, apply avehicle body wax to the paintedsurfaces that mate with the doorand tailgate seals.

If possible, periodically run theengine until it reaches fulloperating temperature (thecooling fan cycles twice).Preferably, do this once a month.

Leave the parking brake off. Putthe transmission in reverse(manual) or Park (automatic).

If you store your vehicle for 12months or longer, have your dealerperform the inspections called for inthe 24 months/30,000 miles(48,000 km) maintenance schedule(normal conditions) as soon as youtake it out of storage (see page ).The replacements called for in themaintenance schedule are notneeded unless the vehicle hasactually reached that time or mileage.

165

Vehicle Storage

194

０５／０９／１３　２０：０６：０７　３１ＳＣＶ６３０　０１９９　

This section covers the morecommon problems that motoristsexperience with their vehicles. Itgives you information about how tosafely evaluate the problem and whatto do to correct it. If the problem hasstranded you on the side of the road,you may be able to get going again.If not, you will also find instructionson getting your vehicle towed.

......................Compact Spare Tire . 196....................Changing a Flat Tire . 197

.............If the Engine Won’t Start . 203................................Jump Starting . 205

..............If the Engine Overheats . 207.........Low Oil Pressure Indicator . 209..........Charging System Indicator . 209

.......Malfunction Indicator Lamp . 210...............Brake System Indicator . 211

..............................................Fuses . 212..............................Fuse Locations . 215

......................Emergency Towing . 217

Taking Care of the Unexpected

Taking

Care

ofthe

Unexpected

195

０５／０９／１３　２０：０６：１０　３１ＳＣＶ６３０　０２００　

Check the inflation pressure of thecompact spare tire every time youcheck the other tires. It should beinflated to:

Follow these precautions:

Never exceed 50 mph (80 km/h).

This tire gives a harsher ride andless traction on some road sur-faces. Use greater caution whiledriving.

Use the compact spare tire as atemporary replacement only. Getyour regular tire repaired or replaced,and put it back on your vehicle assoon as you can.

Replace the tire when you can seethe tread wear indicator bars. Thereplacement should be the same sizeand design tire, mounted on thesame wheel. The spare tire is notdesigned to be mounted on a regularwheel, and the spare wheel is notdesigned for mounting a regular tire.

Do not mount snow chains on thecompact spare tire.

Do not use your compact sparetire on another vehicle unless it isthe same make and model.

On models with manualtransmission, do not drive for along period with the compactspare tire mounted on a frontwheel; it will damage the limitedslip differential.

Compact Spare Tire

196

INDICATOR LOCATION MARK

TREAD WEAR INDICATOR BAR

60 psi (420 kPa , 4.2 kgf/cm )

０５／０９／１３　２０：０６：１７　３１ＳＣＶ６３０　０２０１　

If you have a flat tire while driving,stop in a safe place to change it.Drive slowly along the shoulder untilyou get to an exit or an area to stopthat is far away from the traffic lanes.

Open the hatch and the tailgate.

The spare tire, jack, and tools areunder the cargo area floor.

Park the vehicle on firm, level, andnon-slippery ground. Put thetransmission in Park (automatic)or reverse (manual). Apply theparking brake.

If you are towing a trailer, unhitchthe trailer.

Turn on the hazard warning lights,and turn the ignition switch to theLOCK (0) position. Have allpassengers get out of the vehiclewhile you change the tire.

1.

2.

3.

4.

CONTINUED

Changing a Flat Tire

Taking

Care

ofthe

Unexpected

197

TOOLS

SPARE TIRE

JACK

The vehicle can easily roll offthe jack, seriously injuringanyone underneath.

Follow the directions forchanging a tire exactly, andnever get under the vehiclewhen it is supported only by thejack.

０５／０９／１３　２０：０６：２６　３１ＳＣＶ６３０　０２０２　

Push the rear edge of the handleto raise the handle loop and pull upthe loop to raise the cargo areafloor.

Unscrew the wing bolt, and takethe spare tire out of the cargo area.

Remove the tools and the jack. Toremove the jack, turn the jack’send bracket counterclockwise toloosen it.

Loosen the five wheel nuts 1/2turn with the wheel nut wrench.

8.

7.

6.5.


198

WHEEL NUTSJACK

WHEEL NUT WRENCH

０５／０９／１３　２０：０６：３３　３１ＳＣＶ６３０　０２０３　

Locate the jacking point nearestthe tire you need to change. It ispointed to by an arrow molded intothe underside of the body. Placethe jack under the jacking point.Turn the end bracket clockwiseuntil the top of the jack contactsthe jacking point. Make sure thejacking point tab is resting in thejack notch.

Use the extension and the wheelnut wrench as shown to raise thevehicle until the flat tire is off theground.

Remove the wheel nuts and wheelcover. The wheel nuts will be veryhot if you were recently driving. Thewheel cover cannot be removedwithout first removing the wheelnuts. Do not attempt to forcibly prythe wheel cover off with ascrewdriver or other tool.

9. 10.

CONTINUED

U.S. LX and Canadian Base models


Taking

Care

ofthe

Unexpected

199

EXTENSION

JACKING POINTSWHEEL COVER

WHEEL NUTS

WHEEL NUTS

WHEEL NUT WRENCH

０５／０９／１３　２０：０６：４０　３１ＳＣＶ６３０　０２０４　

Before mounting the spare tire,wipe any dirt off the mountingsurface of the wheel and hub witha clean cloth. Wipe the hubcarefully; it may be hot fromdriving.

Put on the spare tire. Put thewheel nuts back on finger-tight,then tighten them in a crisscrosspattern with the wheel nut wrenchuntil the wheel is firmly againstthe hub. Do not try to tightenthem fully.

Remove the wheel nuts and theflat tire. Temporarily place the flattire on the ground with the outsidesurface of the wheel facing up.

13.

12.11.


200

BRAKE HUB

０５／０９／１３　２０：０６：４６　３１ＳＣＶ６３０　０２０５　

Store the jack in its holder. Turnthe jack’s end bracket to lock it inplace. Store the tools.

Remove the center cap from theflat tire, and store it in the sparetire well.

Remove the wing bolt on the sparetire mount, and pivot the arm 90°to the upright position. Thentighten the wing bolt securely.Tighten the wheel nuts securely in

the same crisscross pattern. Havethe wheel nut torque checked atthe nearest automotive servicefacility.Tighten the wheel nuts to:

Lower the vehicle to the ground,and remove the jack.

18.

16.

17.

14.

15.

CONTINUED


Taking

Care

ofthe

Unexpected

201

WING BOLT

ARM

80 lbf·ft (108 N·m , 11 kgf·m)

Loose items can fly around theinterior in a crash and couldseriously injure the occupants.

Store the wheel, jack, and toolssecurely before driving.

０５／０９／１３　２０：０６：５５　３１ＳＣＶ６３０　０２０６　

Remove the small round plug fromthe cargo area floor by pushing itfrom the back side to make a hole.Store the removed plug in a placeyou can easily remember.

Reinstall the cargo area floor.Place the flat tire face down on thecargo area floor.

Align the center of the flat tirewith the hole in the cargo areafloor. Remove the spacer conefrom the wing bolt, turn it over,and put it back on the bolt.

Secure the flat tire by screwingthe wing bolt to the spare tiremount through the hole in thecargo area floor.

19. 20.

21.

22.


202

WING BOLT

SPACER CONE

０５／０９／１３　２０：０７：０１　３１ＳＣＶ６３０　０２０７　

Diagnosing why the engine won’tstart falls into two areas, dependingon what you hear when you turn theignition switch to the START (III)position:

When you turn the ignition switch tothe START (III) position, you do nothear the normal noise of the enginetrying to start. You may hear aclicking sound or series of clicks, ornothing at all.

Turn the ignition switch to theSTART (III) position. If theheadlights do not dim, check thecondition of the fuses. If the fusesare OK, there is probablysomething wrong with theelectrical circuit for the ignitionswitch or starter motor. You willneed a qualified technician todetermine the problem (see

on page ).

If the headlights dim noticeably orgo out when you try to start theengine, either the battery is dis-charged or the connections arecorroded. Check the condition of thebattery and terminal connections(see page ). You can then tryjump starting the vehicle from abooster battery (see page ).

You hear nothing, or almostnothing. The engine’s startermotor does not operate at all, oroperates very slowly.

You can hear the starter motoroperating normally, or the startermotor sounds like it is spinningfaster than normal, but the enginedoes not start up and run.

Turn the ignition switch to the ON(II) position. Turn on theheadlights, and check theirbrightness. If the headlights arevery dim or do not come on at all,the battery is discharged (see

on page ).

Check the transmission interlock.If you have a manual transmission,the clutch pedal must be pushedall the way to the floor or thestarter will not operate. With anautomatic transmission, the shiftlever must be in Park or neutral.

Check these things:

193

205

217

205 CONTINUED

Nothing Happens or the StarterMotor Operates Very Slowly

Emergency Towing

Jump Starting

If the Engine Won’t Start

Taking

Care

ofthe

Unexpected

203

０５／０９／１３　２０：０７：１０　３１ＳＣＶ６３０　０２０８　

Are you using a properly codedkey? An improperly coded key willcause the immobilizer systemindicator in the instrument panelto blink rapidly (see page ).

In this case, the starter motor’sspeed sounds normal, or even fasterthan normal, when you turn theignition switch to the START (III)position, but the engine does not run.

Are you using the proper startingprocedure? Refer to

on page .

Do you have fuel? Check the fuelgauge; the low fuel indicator maynot be working.

There may be an electricalproblem, such as no power to thefuel pump. Check all the fuses(see page ).

If you find nothing wrong, you willneed a qualified technician to findthe problem (see

on page ).

212

55

140

217

The Starter Operates Normally

Starting theEngine

EmergencyTowing

If the Engine Won’t Start

204

０５／０９／１３　２０：０７：１６　３１ＳＣＶ６３０　０２０９　

＋

＋

Although this seems like a simpleprocedure, you should take severalprecautions.

You cannot start your vehicle with anautomatic transmission by pushingor pulling it.

Open the hood, and check thephysical condition of the battery.In very cold weather, check thecondition of the electrolyte. If itseems slushy or frozen, do not tryjump starting until it thaws.

Turn off all the electrical acces-sories: heater, A/C, stereo system,lights, etc. Put the transmission inneutral or Park, and set theparking brake.

Connect one jumper cable to thepositive ( ) terminal on yourbattery. Connect the other end tothe positive ( ) terminal on thebooster battery.

The numbers in the illustration showyou the order to connect the jumpercables.

1.

2.

3.

CONTINUED

To Jump Start Your Vehicle:

Jump Starting

Taking

Care

ofthe

Unexpected

205

BOOSTER BATTERY

A battery can explode if you donot follow the correct procedure,seriously injuring anyonenearby.

Keep all sparks, open flames,and smoking materials awayfrom the battery.

If a battery sits in extreme cold, theelectrolyte inside can f reeze.Attempting to jump start with a f rozenbattery can cause it to rupture.

０５／０９／１３　２０：０７：２５　３１ＳＣＶ６３０　０２１０　

－Connect the second jumper cableto the negative ( ) terminal onthe booster battery. Connect theother end to the grounding strapon your vehicle as shown. Do notconnect this jumper cable to anyother part of the engine.

If the booster battery is in anothervehicle, have an assistant startthat vehicle and run it at a fast idle.

Start your vehicle. If the startermotor still operates slowly, checkthat the jumper cables have goodmetal-to-metal contact.

Once your vehicle is running,disconnect the negative cable fromyour vehicle, then from thebooster battery. Disconnect thepositive cable from your vehicle,then from the booster battery.

Keep the ends of the jumper cablesaway from each other and any metalon the vehicle until everything isdisconnected. Otherwise, you maycause an electrical short.

4.

5.

6.

7.

Jump Starting

206

０５／０９／１３　２０：０７：３１　３１ＳＣＶ６３０　０２１１　

If you do not see steam or spray,leave the engine running, andwatch the temperature gauge. Ifthe high heat is due to overloading,the engine should start to cooldown almost immediately. If itdoes, wait until the temperaturegauge comes down to the midpoint,then continue driving.

If the temperature gauge stays atthe red mark, turn off the engine.

The pointer of the vehicle’stemperature gauge should stay inthe midrange. If it climbs to the redmark, you should determine thereason (hot day, driving up a steephill, etc.).

If the vehicle overheats, you shouldtake immediate action. The onlyindication may be the temperaturegauge climbing to or above the redmark. Or you may see steam orspray coming from under the hood.

Safely pull to the side of the road.Put the transmission in neutral(manual) or Park (automatic), andset the parking brake. Turn off allthe accessories, and turn on thehazard indicators.

If you see steam and/or spraycoming from under the hood, turnoff the engine. Wait until you seeno more signs of steam or spray,then open the hood.

1.

2.

3.

4.

CONTINUED

If the Engine Overheats

Taking

Care

ofthe

Unexpected

207

Steam and spray from anoverheated engine canseriously scald you.

Do not open the hood if steamis coming out.

Driving with the temperature gaugepointer at the red mark can causeserious damage to the engine.

０５／０９／１３　２０：０７：３９　３１ＳＣＶ６３０　０２１２　

Look for any obvious coolant leaks,such as a split radiator hose.Everything is still extremely hot,so use caution. If you find a leak, itmust be repaired before youcontinue driving (see

on page ).

If you don’t find an obvious leak,check the coolant level in theradiator reserve tank (see page

).Using gloves or a large heavycloth, turn the radiator capcounterclockwise, without pushingdown, to the first stop. After thepressure releases, push down onthe cap, and turn it until it comesoff.

Put the radiator cap back ontightly. Run the engine, and watchthe temperature gauge. If it goesback to the red mark, the engineneeds repair (see

on page ).

If the temperature stays normal,check the coolant level in theradiator reserve tank. If it hasgone down, add coolant to theMAX mark. Put the cap back ontightly.

If there was no coolant in thereserve tank, you may need to addcoolant to the radiator. Let theengine cool down until the pointerreaches the middle of thetemperature gauge or lowerbefore checking the radiator.

Start the engine, and set thetemperature control dial tomaximum heat. Add coolant to theradiator up to the base of the fillerneck. If you do not have theproper coolant mixture available,you can add plain water.Remember to have the coolingsystem drained and refilled withthe proper mixture as soon as youcan.

9.

8.7.

6.

5.

11.

10.

217

217

128

EmergencyTowing

EmergencyTowing

If the Engine Overheats

208

Removing the radiator capwhile the engine is hot cancause the coolant to spray out,seriously scalding you.

Always let the engine andradiator cool down beforeremoving the radiator cap.

０５／０９／１３　２０：０７：４６　３１ＳＣＶ６３０　０２１３　

Let the vehicle sit for a minute.Open the hood, and check the oillevel (see page ). An enginevery low on oil can lose pressureduring cornering and other drivingmaneuvers.

If necessary, add oil to bring thelevel back to the full mark on thedipstick (see page ).

If the charging systemindicator comes on brightly

when the engine is running, thebattery is not being charged.

Immediately turn off all electricalaccessories. Try not to use otherelectrically operated controls such asthe power windows. Keep the enginerunning; starting the engine willdischarge the battery rapidly.

Go to a service station or garagewhere you can get technicalassistance.

Safely pull off the road, and shutoff the engine. Turn on the hazardwarning lights.

This indicator should nevercome on when the engine is

running. If it starts flashing or stayson, the oil pressure has dropped verylow. Serious engine damage ispossible and you should takeimmediate action.

Start the engine, and watch the oilpressure indicator. If it does not goout within 10 seconds, turn off theengine. There is a mechanicalproblem that needs to be repairedbefore you can continue driving(see on page

).

1.

2.

4.

3.

170

217

128

Low Oil Pressure Indicator Charging System Indicator

Emergency Towing

Low Oil Pressure Indicator, Charging System Indicator

Taking

Care

ofthe

Unexpected

209

Running the engine with low oilpressure can cause serious mechanicaldamage almost immediately. Turn of fthe engine as soon as you can saf ely getthe vehicle stopped.

０５／０９／１３　２０：０７：５５　３１ＳＣＶ６３０　０２１４　

If the indicator comes on repeatedly,even though it may turn off as youcontinue driving, have the vehiclechecked by the dealer as soon aspossible.

Your vehicle has certain ‘‘readinesscodes’’ that are part of the on-boarddiagnostics for the emissionssystems. In some states, part of theemissions testing is to make surethese codes are set. If they are notset, the test cannot be completed.

If this indicator comes onwhile driving, it means one

of the engine’s emissions controlsystems may have a problem. Eventhough you may feel no difference inyour vehicle’s performance, it canreduce your fuel economy and causeincreased emissions. Continuedoperation may cause serious damage.

If you have recently refueled yourvehicle, the indicator coming oncould be due to a loose or missingfuel fill cap. Tighten the cap until itclicks at least once.Tightening the cap will not turn theindicator off immediately; it can takeseveral days of normal driving.

If your vehicle’s battery has beendisconnected or gone dead, thesecodes are erased. It can take severaldays of driving under variousconditions to set the codes again.

To check if they are set, turn theignition switch to the ON (II)position, without starting the engine.The malfunction indicator lamp willcome on for 20 seconds. If it thengoes off, the readiness codes are set.If it blinks five times, the readinesscodes are not set. If possible, do nottake your vehicle for a stateemissions test until the readinesscodes are set. Refer to

for moreinformation (see page ).230

Readiness CodesState

Emissions Testing

Malfunction Indicator Lamp

210

If you keep driving with themalf unction indicator lamp on, you candamage your vehicle’s emissionscontrols and engine. Those repairs maynot be covered by your vehicle’swarranties.

０５／０９／１３　２０：０８：０１　３１ＳＣＶ６３０　０２１５　

However, if the brake pedal does notfeel normal, you should takeimmediate action. A problem in onepart of the system’s dual circuitdesign will still give you braking attwo wheels. You will feel the brakepedal go down much farther beforethe vehicle begins to slow down, andyou will have to press harder on thepedal.

Slow down by shifting to a lowergear, and pull to the side of the roadwhen it is safe. Because of the longdistance needed to stop, it ishazardous to drive the vehicle. Youshould have it towed and repaired assoon as possible (see

on page ).

If you must drive the vehicle a shortdistance in this condition, driveslowly and carefully.

If the brake system indicator comeson while driving, the brake fluid levelis probably low. Press lightly on thebrake pedal to see if it feels normal.If it does, check the brake fluid levelthe next time you stop at a servicestation (see page ).

If the fluid level is low, take yourvehicle to a dealer, and have thebrake system inspected for leaks orworn brake pads.

The brake system indicatornormally comes on whenyou turn the ignition switchto the ON (II) position, andas a reminder to check theparking brake. It will stayon if you do not fullyrelease the parking brake.

177

217Emergency

Towing

Brake System Indicator

Taking

Care

ofthe

Unexpected

211

Canada

U.S.

０５／０９／１３　２０：０８：０８　３１ＳＣＶ６３０　０２１６　

Turn the ignition switch to theLOCK (0) position. Make sure theheadlights and all otheraccessories are off.

If something electrical in yourvehicle stops working, check for ablown fuse first. Determine from thechart on pages and , or thediagram on the fuse box lid, whichfuse or fuses control that device.Check those fuses first, but check allthe fuses before deciding that ablown fuse is the cause. Replace anyblown fuses, and check if the deviceworks.

The interior fuse box is underneaththe steering column. To remove thefuse box lid, turn the knobscounterclockwise and pull the lid outof its hinges.

The vehicle’s fuses are located intwo fuse boxes. The under-hood fusebox is located in the enginecompartment on the driver’s side. Toopen it, push the tabs as shown.

Remove the cover from the fusebox.

1.

2.

215 216

Checking and Replacing Fuses

Fuses

212

TAB

UNDER-HOOD INTERIOR

KNOBS

０５／０９／１３　２０：０８：１４　３１ＳＣＶ６３０　０２１７　

Check the smaller fuses in theunder-hood fuse box and all thefuses in the interior fuse box bypulling out each one with the fusepuller provided in the under-hoodfuse box.

Check each of the large fuses inthe under-hood fuse box bylooking through the top at the wireinside. Remove the screws with aPhillips-head screwdriver.

If you cannot drive the vehiclewithout fixing the problem, and youdo not have a spare fuse, take a fuseof the same rating or a lower ratingfrom one of the other circuits. Makesure you can do without that circuittemporarily (such as the accessorypower socket or radio).

If you replace the blown fuse with aspare fuse that has a lower rating, itmight blow out again. This does notindicate anything wrong. Replace thefuse with one of the correct rating assoon as you can.

Look for a blown wire inside thefuse. If it is blown, replace it withone of the spare fuses of the samerating or lower.

3. 4.

5.

CONTINUED

Fuses

Taking

Care

ofthe

Unexpected

213

FUSE

BLOWN

BLOWN

０５／０９／１３　２０：０８：２１　３１ＳＣＶ６３０　０２１８　

If the replacement fuse of thesame rating blows in a short time,there is probably a seriouselectrical problem in your vehicle.Leave the blown fuse in thatcircuit and have your vehiclechecked by a qualified mechanic.

If the radio fuse is removed, theaudio system will disable itself. Thenext time you turn on the radio youwill see ‘‘CODE’’ in the frequencydisplay. Use the preset buttons toenter the five-digit code (see page

).

6.

116

On U.S. EX models andCanadian Y package

Fuses

214

Replacing a f use with one that has ahigher rating greatly increases thechances of damaging the electricalsystem. If you do not have areplacement f use with the proper ratingf or the circuit, install one with a lowerrating.

０５／０９／１３　２０：０８：２６　３１ＳＣＶ６３０　０２１９　

＋＋

＊＊

＊

＊

－

－

－

－

－

CONTINUED

Circuits ProtectedNo. Amps.

Circuits ProtectedAmps.No.

Ignition CoilB ACCB Daytime running lights

IG1 ACGNot Used

12345

15 A15 A10 A10 A

Power Window RelayAMPAccessory, RadioRear WiperMeterABSIG2 Daytime running lightsSRSRemote Control MirrorsLAF HeaterNot UsedFuel PumpFront Accessory Power SocketTurn Signal LightsFront WiperNot UsedPassenger’s Power WindowDriver’s Power WindowNot UsedNot Used

7.5 A20 A

7.5 A10 A

7.5 A7.5 A7.5 A10 A10 A20 A

15 A15 A

7.5 A20 A

20 A20 A

6789

10111213141516171819202122232425

2 :1 : If equipped

Canadian models

2

2

Fuse Locations

Taking

Care

ofthe

Unexpected

215

INTERIOR FUSE BOX

０５／０９／１３　２０：０８：３３　３１ＳＣＶ６３０　０２２０　

－

－

－

No. Amps. Circuits Protected

123456789

1011121314151617181920

30 A15 A

7.5 A20 A15 A15 A15 A

10 A30 A20 A40 A40 A40 A15 A15 A15 A30 A

100 A50 A

Condenser FanSmall LightInterior LightCooling Fan MotorHazardIGPHorn, StopNot UsedBack UpABS MotorRear DefrosterHeater MotorPower Window MainOptionLeft HeadlightDoor LockRight HeadlightABS MTR FSRBatteryIG1 MainSpare Fuses21 25 7.5A 30A

Fuse Locations

216

UNDER-HOOD FUSE BOX

０５／０９／１３　２０：０８：３７　３１ＳＣＶ６３０　０２２１　

The operator will loadyour vehicle on the back of a truck.Any other method of towing willdamage the drive system. When youcontact the towing agency, informthem a flat-bed is required.

If your vehicle needs to be towed,call a professional towing service ororganization. Never tow your vehiclewith just a rope or chain. It is verydangerous.

The only way you can safely towyour vehicle is with flat-bedequipment.

Emergency Towing

Taking

Care

ofthe

Unexpected

217

Towing with only two tires on theground will damage parts of the 4WDsystem. It should be transported on af lat-bed truck or trailer.

０５／０９／１３　２０：０８：４２　３１ＳＣＶ６３０　０２２２　

218

０５／０９／１３　２０：０８：４４　３１ＳＣＶ６３０　０２２３　

The diagrams in this section giveyou the dimensions and capacities ofyour vehicle, and the locations of theidentification numbers. It alsoincludes information you shouldknow about your vehicle’s tires andemissions control systems.

................Identification Numbers . 220................................Specifications . 222

DOT Tire Quality Grading......................(U.S. Vehicles) . 224

Uniform Tire Quality..................................Grading . 224.................................Treadwear . 224

......................................Traction . 224.............................Temperature . 225

.................................Tire Labeling . 226

.......................Emissions Controls . 227.....................The Clean Air Act . 227

Crankcase Emissions Control....................................System . 227

Evaporative Emissions Control....................................System . 227

Onboard Refueling Vapor................................Recovery . 227

...Exhaust Emissions Controls . 228....................PGM-FI System . 228

Ignition Timing Control................................System . 228

Three Way Catalytic...........................Converter . 228

....................Replacement Parts . 228..Three Way Catalytic Converter . 229

..............State Emissions Testing . 230

Technical Information

TechnicalInform

ation

219

０５／０９／１３　２０：０８：４８　３１ＳＣＶ６３０　０２２４　

Your vehicle has several identifyingnumbers located in various places.

The vehicle identification number(VIN) is the 17-digit number yourdealer uses to register your vehiclefor warranty purposes. It is alsonecessary for licensing and insuringyour vehicle. The easiest place tofind the VIN is on a plate fastened tothe top of the dashboard. You cansee it by looking through thewindshield on the driver’s side. It isalso on the certification labelattached to the driver’s doorjamb(front edge of rear door), and isstamped on the engine compartmentbulkhead. The VIN is also providedin bar code on the certification label.

Identif ication Numbers

220

VEHICLE IDENTIFICATION NUMBER

CERTIFICATION LABEL

０５／０９／１３　２０：０８：５２　３１ＳＣＶ６３０　０２２５　

The transmission number is on alabel on top of the transmission.

The engine number is stamped intothe engine block.

Identif ication Numbers

TechnicalInform

ation

221

AUTOMATIC TRANSMISSION NUMBER

ENGINE NUMBER MANUAL TRANSMISSION NUMBER

０５／０９／１３　２０：０８：５６　３１ＳＣＶ６３０　０２２６　

＊

＊

＊

＊＊

Specifications

222

Dimensions

Weights

Engine

Capacities

169.3 in (4,300 mm)71.5 in (1,815 mm)70.4 in (1,788 mm)101.4 in (2,575 mm)62.1 in (1,577 mm)62.3 in (1,582 mm)

1.88 US gal (7.1 )

1.90 US gal (7.2 )

3.3 US qt (3.1 )

7.6 US qt (7.2 )

2.0 US qt (1.9 )

1.43 US gal (5.4 )

3.1 US qt (2.9 )

1.45 US gal (5.5 )

6.9 US qt (6.5 )

5.6 US qt (5.3 )4.2 US qt (4.0 )4.4 US qt (4.2 )

15.9 US gal (60 )

9.7 : 1144 cu-in (2,354 cm )

3.43 x 3.90 in (87.0 x 99.0 mm)

0.145 US gal (0.55 )

1.3 US qt (1.2 )1.1 US qt (1.0 )

2.4 US qt (2.3 )2.3 US qt (2.2 )

Excluding the oil remaining in the engineIncluding the coolant in the reserve tank and that remaining in theengineReserve tank capacity:

LengthWidthHeightWheelbaseTrack

Gross vehicle weight rating

Type

Bore x StrokeDisplacementCompression ratioSpark plugs

Fuel tank

Engine oil

See the certification label attachedto the driver’s doorjamb (frontedge of rear door).

Water cooled 4-stroke DOHCVTEC 4-cylinder gasoline engine

Enginecoolant

Automatictransmissionfluid

Manualtransmissionfluid

Reardifferentialfluid (4WD)Windshieldwasherreservoir

IZFR6K-11SKJ20DR-M11 4.8 US qt (4.5 )

Approx.

FrontRear

Change

Without filterTotal

1 :2 :

NGK:DENSO:

ChangeTotal

ChangeTotalChange

4WD2WD

Total4WD2WD

ChangeTotal

4WD2WD

ChangeTotal


Manual Transmission

1

2

2

Including filter

０５／０９／１３　２０：０９：１４　３１ＳＣＶ６３０　０２２７　

－－

－－

－－

－－－－－－－－－

－

Specifications

TechnicalInform

ation

223

Air Conditioning

Lights

Battery

Fuses

Alignment

Tires

HFC-134a (R-134a)16.9 18.7 oz (480 530 g)

SP-10

12 V 60/55 W (H4/HB2)

12 V12 V12 V12 V12 V12 V12 V

8 W4 CP8 W5 W18 W (21 CP)21/5 W21 W

P215/70R16 99S

1°50’1°

0°13’0.08 in (2.0 mm)

0.0 in (0 mm)

12 V 21/5 W

12 V 3 CP

12 V 21 W 32 psi (220 kPa , 2.2 kgf/cm )34 psi (235 kPa , 2.4 kgf/cm )

45 AH/20 HR12 V

Refrigerant typeCharge quantityLubricant type

HeadlightsFront turn signal/parkinglightsFront side marker lightsRear turn signal lightsBrake/TaillightsBack-up lightsLicense plate lightsCeiling lightSpotlightsCargo area lightHigh-mount brake light

Capacity

Interior

Under-hood

Toe-in

Camber

Caster

SizePressure

60 psi (420 kPa , 4.2 kgf/cm )

See page 215 or the fuse labelattached to the inside of the fusebox door under the steeringcolumn.See page 216 or the fuse boxcover.

FrontRearFrontRearFront

Front/RearFrontRearSpare

０５／０９／１３　２０：０９：３３　３１ＳＣＶ６３０　０２２８　

－

Quality grades can be found whereapplicable on the tire sidewallbetween the tread shoulder and themaximum section width. Forexample:

All passenger car tires must conformto Federal Safety Requirements inaddition to these grades.

The treadwear grade is a compara-tive rating based on the wear rate ofthe tire when tested under controlledconditions on a specified governmenttest course. For example, a tiregraded 150 would wear one and one-half (1 1/2) times as well on thegovernment course as a tire graded100. The relative performance oftires depends upon the actual condi-tions of their use, however, and maydepart significantly from the normdue to variations in driving habits,service practices, and differences inroad characteristics and climate.

The traction grades, from highest tolowest, are AA, A, B, and C. Thosegrades represent the tire’s ability tostop on wet pavement as measuredunder controlled conditions onspecified government test surfacesof asphalt and concrete. A tiremarked C may have poor tractionperformance.

Warning: The traction gradeassigned to this tire is based onstraight-ahead braking traction tests,and does not include acceleration,cornering, hydroplaning, or peaktraction characteristics.

The tires on your vehicle meet allU.S. Federal Safety Requirements.All tires are also graded fortreadwear, traction, and temperatureperformance according toDepartment of Transportation(DOT) standards. The followingexplains these gradings.

Uniform Tire Quality Grading

Treadwear 200Traction AATemperature A

Treadwear Traction AA, A, B, C

DOT Tire Quality Grading (U.S. Vehicles)

224

０５／０９／１３　２０：０９：４１　３１ＳＣＶ６３０　０２２９　

－The temperature grades are A (thehighest), B, and C, representing thetire’s resistance to the generation ofheat and its ability to dissipate heatwhen tested under controlledconditions on a specified indoorlaboratory test wheel. Sustained hightemperature can cause the materialof the tire to degenerate and reducetire life, and excessive temperaturecan lead to sudden tire failure. Thegrade C corresponds to a level ofperformance, which all passengervehicle tires must meet under theFederal Motor Vehicle SafetyStandard No. 109. Grades B and Arepresent higher levels ofperformance on the laboratory testwheel than the minimum required bylaw.

Warning: The temperature grade forthis tire is established for a tire thatis properly inflated and notoverloaded. Excessive speed,underinflation, or excessive loading,either separately or in combination,can cause heat buildup and possibletire failure.

Temperature A, B, C

DOT Tire Quality Grading (U.S. Vehicles)

TechnicalInform

ation

225

０５／０９／１３　２０：０９：４５　３１ＳＣＶ６３０　０２３０　

－

－

－－

－

－－

－

－

－

－

－

－

The tires that came on your vehiclehave a number of markings. Thoseyou should be aware of are describedbelow.

Whenever tires are replaced, theyshould be replaced with tires of thesame size. Following is an exampleof tire size with an explanation ofwhat each component means.

Load index (a numerical codeassociated with the maximumload the tire can carry).Speed symbol (analphabetical code indicatingthe maximum speed rating).

This indicates that the tiremeets all requirements ofthe U.S. Department ofTransportation.Manufacturer’sidentification mark.Tire type code.Date of manufacture.

The maximum airpressure the tire canhold.

The maximum load thetire can carry atmaximum air pressure.The tire identification number (TIN)

is a group of numbers and lettersthat look like this example:

Vehicle type (P indicatespassenger vehicle).Tire width in millimeters.Aspect ratio (the tire’s sectionheight as a percentage of itswidth).Tire construction code (Rindicates radial).Rim diameter in inches.

P

R

16

DOT

B97R

FW6X2202

Max Press

Max Load

21570

99

S

Tire Labeling

Tire Labeling

Tire SizeTire Identif ication Number

Maximum Tire Pressure

Maximum Tire Load

226

DOT B97R FW6X 2202P215/70R16 99S

０５／０９／１３　２０：１０：０１　３１ＳＣＶ６３０　０２３１　

＊

＊

The burning of gasoline in yourvehicle’s engine produces several by-products. Some of these are carbonmonoxide (CO), oxides of nitrogen(NOx), and hydrocarbons (HC).Gasoline evaporating from the tankalso produces hydrocarbons.Controlling the production of NOx,CO, and HC is important to theenvironment. Under certainconditions of sunlight and climate,NOx and HC react to formphotochemical ‘‘smog.’’ Carbonmonoxide does not contribute tosmog creation, but it is a poisonousgas.

The United States Clean Air Actsets standards for automobileemissions. It also requires thatautomobile manufacturers explain toowners how their emissions controlswork and what to do to maintainthem. This section summarizes howthe emissions controls work.Scheduled maintenance is on page

.

In Canada, Honda vehicles complywith the Canadian emissionrequirements, as specified in anagreement with EnvironmentCanada, at the time they aremanufactured.

Your vehicle has a positivecrankcase ventilation system. Thiskeeps gasses that build up in theengine’s crankcase from going intothe atmosphere. The positive

crankcase ventilation valve routesthem from the crankcase back to theintake manifold. They are thendrawn into the engine and burned.

As gasoline evaporates in the fueltank, an evaporative emissionscontrol canister filled with charcoaladsorbs the vapor. It is stored in thiscanister while the engine is off. Afterthe engine is started and warmed up,the vapor is drawn into the engineand burned during driving.

The onboard refueling vaporrecovery (ORVR) system capturesthe fuel vapors during refueling. Thevapors are adsorbed in a canisterfilled with activated carbon. Whiledriving, the fuel vapors are drawninto the engine and burned off.

163

Emissions Controls

The Clean Air Act

Crankcase Emissions ControlSystem

Evaporative Emissions ControlSystem

Onboard Refueling VaporRecovery T

echnicalInformation

227

０５／０９／１３　２０：１０：０９　３１ＳＣＶ６３０　０２３２　

The PGM-FI system uses sequentialmultiport fuel injection. It has threesubsystems: air intake, enginecontrol, and fuel control. Thepowertrain control module (PCM) inautomatic transmission vehicles orthe engine control module (ECM) inmanual transmission vehicles usesvarious sensors to determine howmuch air is going into the engine. Itthen controls how much fuel to injectunder all operating conditions.

The emissions control systems aredesigned and certified to work to-gether in reducing emissions tolevels that comply with the Clean AirAct. To make sure the emissionsremain low, you should use only newHonda replacement parts or theirequivalent for repairs. Using lowerquality parts may increase theemissions from your vehicle.

The exhaust emissions controlsinclude three systems: PGM-FI,ignition timing control, and threeway catalytic converter. These threesystems work together to control theengine’s combustion and minimizethe amount of HC, CO, and NOx thatcomes out the tailpipe. The exhaustemissions control systems areseparate from the crankcase andevaporative emissions controlsystems. The emissions control systems are

covered by warranties separate fromthe rest of your vehicle. Read yourwarranty manual for more informa-tion.

The three way catalytic converter isin the exhaust system. Throughchemical reactions, it converts HC,CO, and NOx in the engine’s exhaustto carbon dioxide (CO ), nitrogen(N ), and water vapor.

This system constantly adjusts theignition timing, reducing the amountof HC, CO, and NOx produced.

2

2

Exhaust Emissions Controls Replacement PartsPGM-FI System

Three Way Catalytic Converter

Ignition Timing Control System

Emissions Controls

228

０５／０９／１３　２０：１０：１７　３１ＳＣＶ６３０　０２３３　

The three way catalytic convertercontains precious metals that serveas catalysts, promoting chemicalreactions to convert the exhaustgasses without affecting the metals.The catalytic converter is referred toas a three-way catalyst, since it actson HC, CO, and NOx. A replacementunit must be an original Honda partor its equivalent.

Always use unleaded gasoline.Even a small amount of leadedgasoline can contaminate thecatalyst metals, making the threeway catalytic converter ineffective.

Keep the engine tuned-up.

The three way catalytic convertermust operate at a high temperaturefor the chemical reactions to takeplace. It can set on fire anycombustible materials that comenear it. Park your vehicle away fromhigh grass, dry leaves, or otherflammables.

A defective three way catalyticconverter contributes to air pollution,and can impair your engine’s per-formance. Follow these guidelines toprotect your vehicle’s three waycatalytic converter.

Have your vehicle diagnosed andrepaired if it is misfiring, back-firing, stalling, or otherwise notrunning properly.

Three Way Catalytic Converter

TechnicalInform

ation

229

THREE WAY CATALYTIC CONVERTER

０５／０９／１３　２０：１０：２４　３１ＳＣＶ６３０　０２３４　

Without touching the acceleratorpedal, start the engine, and let itidle for 20 seconds.

If you take your vehicle for a stateemissions test shortly after thebattery has been disconnected orgone dead, it may not pass the test.This is because of certain ‘‘readinesscodes’’ that must be set in the on-board diagnostics for the emissionssystems. These codes are erasedwhen the battery is disconnected,and set again only after several daysof driving under a variety ofconditions.

If the testing facility determines thatthe readiness codes are not set, youwill be requested to return at a laterdate to complete the test. If you mustget the vehicle retested within thenext two or three days, you cancondition the vehicle for retesting bydoing the following.

Make sure the fuel tank is nearly,but not completely full (around3/4).

Keep the vehicle in Park(automatic transmission) orneutral (manual transmission).Increase the engine speed to 2,000rpm, and hold it there until thetemperature gauge rises to at least1/4 of the scale (about 3 minutes).

Make sure the vehicle has beenparked with the engine off for 6hours or more.

Make sure the ambienttemperature is between 40° and95°F.

Testing of Readiness Codes

State Emissions Testing

230

０５／０９／１３　２０：１０：３１　３１ＳＣＶ６３０　０２３５　

Then drive in city/suburbantraffic for at least 10 minutes.When traffic conditions allow, letthe vehicle coast for severalseconds without using theaccelerator pedal or the brakepedal.

If the testing facility determines thereadiness codes are still not set, seeyour dealer.

Select a nearby lightly traveledmajor highway where you canmaintain a speed of 50 to 60 mph(80 to 97 km/h) for at least 20minutes. Drive on the highway inD (A/T) or 5th (M/T). Do not usecruise control. When traffic allows,drive for 90 seconds withoutmoving the accelerator pedal.(Vehicle speed may vary slightly;this is okay.) If you cannot do thisfor a continuous 90 secondsbecause of traffic conditions, drivefor at least 30 seconds, then repeatit two more times (for a total of 90seconds).

State Emissions Testing

TechnicalInform

ation

231

０５／０９／１３　２０：１０：３５　３１ＳＣＶ６３０　０２３６　

232

０５／０９／１３　２０：１０：３７　３１ＳＣＶ６３０　０２３７　

....Customer Service Information . 234....................Warranty Coverages . 235

Reporting Safety Defects..........................(U.S. Vehicles) . 236

.....................Authorized Manuals . 237

Warranty and Customer Relations

Warranty

andC

ustomer

Relations

233

０５／０９／１３　２０：１０：４０　３１ＳＣＶ６３０　０２３８　

Honda dealership personnel aretrained professionals. They shouldbe able to answer all your questions.If you encounter a problem that yourdealership does not solve to yoursatisfaction, please discuss it withthe dealership’s management. Theservice manager or general managercan help. Almost all problems aresolved in this way.

If you are dissatisfied with thedecision made by the dealership’smanagement, contact your HondaCustomer Service Office.

U.S. Owners:

Canadian Owners:

In Puerto Rico and the U.S. VirginIslands:

When you call or write, please giveus this information:

Vehicle identification number (seepage )

Name and address of the dealerwho services your vehicle

Date of purchase

Mileage on your vehicle

Your name, address, andtelephone number

A detailed description of theproblem

Name of the dealer who sold thevehicle to you

220

Customer Service Information

234

CUSTOMER RELATIONSRELATIONS AVEC LA CLIENTÈLE

American Honda Motor Co., Inc.Honda Automobile Customer ServiceMail Stop 500-2N-7A1919 Torrance BoulevardTorrance, California 90501-2746

Tel: (800) 999-1009

Honda Canada Inc.715 Milner AvenueToronto, ONM1B 2K8

Tel: 1-888-9-HONDA-9Fax: Toll-free 1-877-939-0909

Toronto (416) 287-4776

Bella InternationalP.O. Box 190816San Juan, PR 00919-0816

Tel: (787) 620-7098

０５／０９／１３　２０：１０：４７　３１ＳＣＶ６３０　０２３９　

－

－

－

－

－

－

－

－

－

Your new vehicle is covered by thesewarranties:

covers your new vehicle, except forthe battery, emissions controlsystems, and accessories, againstdefects in materials andworkmanship.

provides proratedcoverage for a replacement batterypurchased from your dealer.

these twowarranties cover your vehicle’semissions control systems. Time,mileage, and coverage areconditional. Please read yourwarranty booklet for exactinformation.

a seatbelt that fails to function properly iscovered for the useful life of thevehicle.

all exterior body panels arecovered for rust-through from theinside for the specified time periodwith no mileage limit.

Honda accessories are coveredunder this warranty. Time andmileage limits depend on the type ofaccessory and other factors. Pleaseread your warranty booklet fordetails.

covers all Hondareplacement parts against defects inmaterials and workmanship.

providescoverage for as long as the pur-chaser of the muffler owns thevehicle.

this warranty gives upto 100 % credit toward a replacementbattery.

Restrictions and exclusions apply toall these warranties. Please read the2006 Honda warranty informationbooklet that came with your vehiclefor precise information on warrantycoverages. Your vehicle’s originaltires are covered by theirmanufacturer. Tire warrantyinformation is in a separate booklet.

Please refer to the 2006 WarrantyManual that came with your vehicle.

Warranty Coverages

U.S. Owners

Canadian Owners

New Vehicle Limited Warranty

Replacement Battery LimitedWarranty

Emissions Control Systems DefectsWarranty and EmissionsPerformance Warranty

Seat Belt Limited Warranty

Rust Perforation Limited Warranty

Accessory Limited Warranty

Replacement Parts LimitedWarranty

Replacement Muffler LifetimeLimited Warranty

Original Equipment Battery LimitedWarranty

Warranty

andC

ustomer

Relations

235

０５／０９／１３　２０：１０：５７　３１ＳＣＶ６３０　０２４０　

If NHTSA receives similar com-plaints, it may open an investigation,and if it finds that a safety defectexists in a group of vehicles, it mayorder a recall and remedy campaign.However, NHTSA cannot becomeinvolved in individual problemsbetween you, your dealer, orAmerican Honda Motor Co., Inc.

If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, youshould immediately inform theNational Highway Traffic SafetyAdministration (NHTSA) in additionto notifying American Honda MotorCo., Inc.

Reporting Safety Defects (U.S. Vehicles)

236

０５／０９／１３　２０：１１：０１　３１ＳＣＶ６３０　０２４１　

To contact NHTSA, you may call theVehicle Safety Hotline toll-free at1-888-327-4236 (TTY: 1-800-424-9153);go to http://www.safercar.gov; orwrite to: Administrator, NHTSA, 400Seventh Street, SW., Washington,DC 20590.You can also obtain otherinformation about motor vehiclesafety from http://www.safercar.gov.

－

－

－

－

＊

＊

＊

＊２００６

ＨＯＮ

Valid only for sales within the United States. Canadianowners should contact their authorized Honda dealer.

The publications shown below can be purchased from HelmIncorporated. You can order in any of three ways:

If you are interested in other years or models, contact Helm Inc.at 1-800-782-4356.

Detach and mail the order form on the right half of this pageCall Helm Inc. at 1-800-782-4356Go online at

(credit card orders only)

Purchasing Factory Authorized Manuals(U.S. only)

Authorized Manuals

Authorized

Manuals

237

ORDER TOLL FREE: 1-800-782-4356

OR

(NOTE: For Credit Card Holder Orders Only)

MINIMUM CREDIT CARD PURCHASE $10.00

Form Description

2003 2006 Honda Element

Service Manual


Electrical Troubleshooting Manual


Body Repair Manual

2006 Honda Element

Navigation System Owner’s Manual

2006 Honda Element

Honda Service History

Order Form for Previous Years-

Indicate Year and Model Desired

Publication

Form Number

61SCV04

61SCV04EL

61SCV30

31SCV630

31SNA700

31SCVM10

31SCVQ30

HON-R

Price

Each

$75.00

$50.00

$44.00

$35.00

$29.00

$12.00

$12.00

FREE

2006 Honda Element Owner’s Manual

2006 Honda Element Quick Start Guide

PUBLICATION NUMBERVEHICLE MODEL

Name YearQty

Price

Each

Total

Price

GRAND TOTAL

HANDLING CHARGE

Mich. Purchases

Add 6% Sales Tax

TOTAL MATERIAL

$6.95

Monday-Friday 8:00 A.M. 6:00 P.M. EST

By completing this form you can order the materials desired. You canpay by check or money order, or charge to your credit card. Mail toHelm Incorporated at the address shown on the back of the order form.

Prices are subject to change withoutnotice and without incurring obligation.

Orders are mailed within 10 days. Pleaseallow adequate time for delivery.

Prices are subject to change without notice and without incurring obligation.

www. helminc. com

０５／０９／１３　２０：１１：１２　３１ＳＣＶ６３０　０２４２　

－

－

－

ＳＨＩＰ

ＴＯ

ＰＡＹＭＥＮＴ

This manual covers maintenance and recommendedprocedures for repair to engine and chassis components.It is written for the journeyman mechanic, but is simpleenough for most mechanically-inclined owners to under-stand.

This manual describes the procedures involved in thereplacement of damaged body parts.

This manual complements the service manual byproviding in-depth troubleshooting information for eachelectrical circuit in your vehicle.

Authorized Manuals

Service Manual:

Electrical Troubleshooting Manual:

Body Repair Manual:

238

NOTE: Dealers and Companies please provide dealer or company name,and also the name of the person to whose attention the shipment shouldbe sent. For purchases outside U.S.A. please write to the address shownbelow for a quotation.

P.O. BOX 07280·DETROIT, MICHIGAN 48207·1-800-782-4356

Customer Name Attention

Apartment Number

State & Zip CodeCity

Daytime Telephone Number

Check or money order enclosed payable to Helm Inc U.S. funds only.Do not send cash

MasterCard

VISA Check here if your billing address is differentfrom the shipping address shown above.

Account Number Expiration: Mo. Yr.

CUSTOMER SIGNATURE DATE

Street Address No P.O. Box Number

( )

These Publications cannot be returned for credit without receiving advance authorization within 14days of delivery. On returns, a restocking fee may be applied against the original order.

０５／０９／１３　２０：１１：２０　３１ＳＣＶ６３０　０２４３　

CONTINUED

BatteryCharging System

...........................Indicator . 54, 209............................Jump Starting . 205

..............................Maintenance . 193............................Specifications . 223

..............................Before Driving . 123..................................Belts, Seat . 10, 20

...........................Beverage Holders . 87

...................................Body Panels . 178..................................Booster Seats . 45

Brakes...........Anti-lock System (ABS) . 149

.............Break-in, New Linings . 124....................Bulb Replacement . 182

...........................................Fluid . 177.........................................Parking . 83

.................System Indicator . 54, 211........................Wear Indicators . 149

.............................Braking System . 148.................Break-in, New Vehicle . 124

..Brightness Control, Instruments . 63........................Brights, Headlights . 62

Bulb Replacement..........................Back-up Lights . 182

..............................Brake Lights . 182................Front Parking Lights . 180

........Front Side Marker Lights . 181.................................Headlights . 179

............................Specifications . 223....................Turn Signal Lights . 180

..............................Bulbs, Halogen . 179................................Bungee Cords . 135

....................................Accessories . 130ACCESSORY (Ignition Key

.......................................Position) . 69..............Accessory Power Sockets . 87

....................Additives, Engine Oil . 171.............................Airbag (SRS) . 11, 23

...Airbags, Additional Information . 23

...Additional Safety Precautions . 29.............................Airbag Service . 28

How the Side Airbag Off......................Indicator Works . 28

..How the SRS Indicator Works . 27How Your Front Airbags

.........................................Work . 24...How Your Side Airbags Work . 26

........................SRS Components . 23................Air Conditioning System . 91

............................................Usage . 91.......................Air Pressure, Tires . 188

.........................Normal Driving . 188......................................Antifreeze . 173

Anti-lock Brakes (ABS)...............................Indicator . 55, 150

...................................Operation . 149

..............Anti-theft, Audio System . 116.Anti-theft Steering Column Lock . 69

......................Armrests, Front Seat . 74..................................Audio System . 94

...Automatic Seat Belt Tensioners . 21.............Automatic Speed Control . 120..............Automatic Transmission . 143

..........................Capacity, Fluid . 222...............Checking Fluid Level . 175

.......................................Shifting . 143.Shift Lever Position Indicator . 143

................Shift Lever Positions . 143....................Shift Lock Release . 146

......................Auxiliary Input Jack . 112

Index

A

B

IND

EX

I

０５／０９／１３　２０：１１：２５　３１ＳＣＶ６３０　０２４４　

＊

＊＊

＊

＊

............................Capacities Chart . 222.............Carbon Monoxide Hazard . 47

.............................Carrying Cargo . 132..............CAUTION, Explanation of . ii

.........................................CD Care . 113...................................CD Changer . 112

.......................CD Error Message . 114.......CD Changer Error Message . 115

.......................................CD Player . 106.................................Ceiling Pocket . 86

........................Certification Label . 220............................................Chains . 192

....................Changing a Flat Tire . 197.................................Changing Oil . 171

........................................How to . 171......................................When to . 165

...Charging System Indicator . 54, 209............Checklist, Before Driving . 139

.....................................Child Safety . 30Child Seats

......LATCH Anchorage System . 39...........................Lower Anchors . 39

..........Tether Anchorage Points . 43............Cleaning the Body Panels . 178

..............................................Clock . 117.........................Clock, Setting the . 117

...................................Clutch Fluid . 177........................CO in the Exhaust . 227

............Cold Weather, Starting in . 140..............................Compact Spare . 196

...............Consumer Information . 234.............Controls, Instruments and . 51

Coolant........................................Adding . 173

....................................Checking . 128.........................Proper Solution . 173

...................Temperature Gauge . 59Crankcase Emissions Control

........................................System . 227................Cruise Control Indicator . 56............Cruise Control Operation . 120.............Customer Service Office . 234

................DANGER, Explanation of . ii...................................Dashboard . 4, 52

Daytime Running Lights...................................Indicator . 56.................................Dead Battery . 205

.........Defects, Reporting Safety . 236..........................Defog and Defrost . 93

................Defogger, Rear Window . 63

................Defrosting the Windows . 93....................................Dimensions . 222

...............Dimming the Headlights . 62Dipstick

..........Automatic Transmission . 175..................................Engine Oil . 128

..........................Directional Signals . 62........Disc Brake Wear Indicators . 149

.....................Disposal of Used Oil . 172Doors

..............Locking and Unlocking . 70......................Power Door Locks . 70

........DOT Tire Quality Grading . 224Downshifting, Manual

.............................Transmission . 141...........Driver and Passenger Safety . 7

...........................................Driving . 137....................................Economy . 129

........................Driving Guidelines . 138..................Dust and Pollen Filter . 185

Index

D

C

II

０５／０９／１３　２０：１１：２９　３１ＳＣＶ６３０　０２４５　

CONTINUED

..............................Economy, Fuel . 129............Emergencies on the Road . 195.............Battery, Jump Starting . 205...........Brake System Indicator . 211

................Changing a Flat Tire . 197.....Charging System Indicator . 209

..................Checking the Fuses . 212.........Hazard Warning Flashers . 63.....Low Oil Pressure Indicator . 209...Malfunction Indicator Lamp . 210

..................Overheated Engine . 207...........................Emergency Brake . 83

......................Emergency Flashers . 63......................Emergency Towing . 217.......................Emissions Controls . 227

.............Emissions Testing, State . 230Engine

....Coolant Temperature Gauge . 59......Engine Speed Limiter . 142, 145

Malfunction Indicator................................Lamp . 54, 210

........Oil Pressure Indicator . 54, 209

..............Oil, What Kind to Use . 170...............................Overheating . 207

............................Specifications . 222.......................................Starting . 140

.Evaporative Emissions Controls . 227...............................Exhaust Fumes . 47

Expectant Mothers, Use of Seat........................................Belts by . 18

.....................................Fan, Interior . 91...........................................Features . 89

....................Filling the Fuel Tank . 126Filters

.........................Dust and Pollen . 185...............................................Oil . 171

.............Flashers, Hazard Warning . 63...................Flat Tire, Changing a . 197

Fluids..........Automatic Transmission . 175

..........................................Brake . 177.........................................Clutch . 177

..............Manual Transmission . 176..........................Power Steering . 178

..................Windshield Washer . 174FM Stereo Radio

.....................................Reception . 98

...........................Folding Rear Seat . 77..........................Four-way Flashers . 63

..........................Four-wheel Drive . 138............................Front Airbags . 11, 23

Front Seat......................................Adjusting . 12

.........................................Airbags . 23.................................................Fuel . 124

......................Fill Door and Cap . 126...........................................Gauge . 59

................Octane Requirement . 124........................Reserve Indicator . 56

........................Tank, Filling the . 126.....................Fuses, Checking the . 212

...............Gas Mileage, Improving . 129.........................................Gasoline . 124

...............Fuel Reserve Indicator . 56...........................................Gauge . 59

................Octane Requirement . 124........................Tank, Filling the . 126

Index

E

F

G

IND

EX

III

０５／０９／１３　２０：１１：３４　３１ＳＣＶ６３０　０２４６　

＊＊

...Identification Number, Vehicle . 220Ignition

..............................................Keys . 65...........................................Switch . 69

............Timing Control System . 228........................Immobilizer System . 66

.........Important Safety Precautions . 8.........Indicators, Instrument Panel . 53

...............................Infant Restraint . 35......................................Infant Seats . 35

......LATCH Anchorage System . 39...........................Lower Anchors . 39

..........Tether Anchorage Points . 43...................Inflation, Proper Tire . 187

.........................Normal Driving . 188...................................Inside Mirror . 82

.............................Inspection, Tire . 189............................Instrument Panel . 53

........Instrument Panel Brightness . 63.................................Interior Lights . 88

........................................Introduction . i

.................Jacking up the Vehicle . 199.......................................Jack, Tire . 197

................................Jump Starting . 205

..................................................Keys . 65

................Gas Station Procedures . 126Gauges

...Engine Coolant Temperature . 59...............................................Fuel . 59

Gearshift Lever Positions..........Automatic Transmission . 143

..............Manual Transmission . 141........................................Glove Box . 87

.............Halogen Headlight Bulbs . 179................................................Hatch . 71

..............Hazard Warning Flashers . 63Headlights

........................................Aiming . 179.......Daytime Running Lights . 62

..................High Beam Indicator . 56........................Reminder Beeper . 62

........Replacing Halogen Bulbs . 179...................................Turning on . 62

..............................Head Restraints . 75.......................Heating and Cooling . 90

.............High Altitude, Starting at . 140.................High-Low Beam Switch . 62

..Hood, Opening and Closing the . 127

..............................................Horn . 5, 60...........................Hydraulic Clutch . 177

.......................Label, Certification . 220.................Lane Change, Signaling . 62

..................Lap/Shoulder Belts . 15, 20...........LATCH Anchorage System . 39

Lights....................Bulb Replacement . 179

.......................................Indicator . 53.........................................Parking . 62

..................................Turn Signal . 62....................................Load Limits . 133

......LOCK (Ignition Key Position) . 69Locks

.......Anti-theft Steering Column . 69............................Fuel Fill Door . 126

Index

H

I

J

K

L

IV

０５／０９／１３　２０：１１：４０　３１ＳＣＶ６３０　０２４７　

CONTINUED

....................................Glove Box . 87.................................Power Door . 70

........................................Tailgate . 72........................Low Coolant Level . 128.........................Low Fuel Indicator . 56

...Low Oil Pressure Indicator . 54, 209................................Lower Anchors . 39

...Lower Gear, Downshifting to a . 141

...Lubricant Specifications Chart . 222.........................................Luggage . 132

..................................Maintenance . 161...Owner Maintenance Checks . 164

.................................Record . 167-168......................Required Indicator . 57

..........................................Safety . 162.............................Schedule . 165-166

.Malfunction Indicator Lamp . 54, 210...................Manual Transmission . 141

...............Checking Fluid Level . 176................................Shifting the . 141

........Manual Transmission Fluid . 176.........................Meters, Gauges . 53, 58

..........................Mirrors, Adjusting . 82

...............Modifying Your Vehicle . 131

...................Neutral Gear Position . 144..................New Vehicle Break-in . 124

.....................Normal Shift Speeds . 142...................NOTICE, Explanation of . i

...............Numbers, Identification . 220

...Octane Requirement, Gasoline . 124.........................................Odometer . 58

...............................Odometer, Trip . 58....................Off-Highway Driving . 157

Oil........................Change, How to . 171......................Change, When to . 165......................Checking Engine . 128..............Pressure Indicator . 54, 209

Selecting Proper Viscosity......................................Chart . 170

...........ON (Ignition Key Position) . 69Onboard Refueling Vapor

....................................Recovery . 227

..............................Outside Mirrors . 82.......................................Overdrive . 145

....................Overheating, Engine . 207.......Owner Maintenance Checks . 164

..............Panel Brightness Control . 63........................Park Gear Position . 143

...........................................Parking . 147.................................Parking Brake . 83

Parking Brake and Brake.................System Indicator . 54, 211

.................................Parking Lights . 62..Parking Over Things that Burn . 147

................................Playing a Disc . 106............Playing the AM/FM Radio . 94

Playing the XM Satellite..........................................Radio . 100

.............................PGM-FI System . 228.................Power Socket Locations . 87

..............................Power Windows . 81..........................Power Door Locks . 70

.........Pregnancy, Using Seat Belts . 18

Index

M

N

O

P

IND

EX

V

０５／０９／１３　２０：１１：４６　３１ＳＣＶ６３０　０２４８　

＊

＊

.........Protecting Adults and Teens . 12...Additional Safety Precautions . 19

.....Advice for Pregnant Women . 18........................Protecting Children . 30

Protecting Infants and Small.......................................Children . 35

...........Protecting Larger Children . 44.....................Using Booster Seat . 45

...................Radiator Overheating . 207...............Radio/CD Sound System . 94

...........................Readiness Codes . 230.......................................Rear Doors . 70

..Rear Lights, Bulb Replacement . 182............................Rear Seat Access . 75..........................Rear Seat, Folding . 77

............................Rear View Mirror . 82.................Rear Window Defogger . 63

.Rear Window Wiper and Washer . 61...............Reclining the Seat-Backs . 73

.......Recommended Shift Speeds . 142.............................Reminder Lights . 53

...............Removing the Rear Seats . 79.......................Remote Transmitter . 67

Replacement Information..............Dust and Pollen Filter . 185

................Engine Oil and Filter . 171..........................................Fuses . 212

................................Light Bulbs . 179....................................Schedule . 165

...........................................Tires . 187.............................Wiper Blades . 186

Replacing Seat Belts After a............................................Crash . 21

Reserve Tank, Engine...............................Coolant . 128, 173

...............................Restraint, Child . 30..................Reverse Gear Position . 144

......................................Roof Rack . 134................................Rotation, Tire . 190

................................Safety Belts . 10, 20.........Safety Defects, Reporting . 236

.................................Safety Features . 9.........................................Airbags . 11

.....................................Seat Belts . 10.............Safety Labels, Location of . 48

...............................Safety Messages . ii

................................Satellite Radio . 100...................................Seat Belts . 10, 20

...............Additional Information . 20Automatic Seat Belt

...............................Tensioners . 21................Lap/Shoulder Belt . 15, 20

................................Maintenance . 21.....................Reminder Light . 20, 54

...................System Components . 20...............Use During Pregnancy . 18

...Wearing a Lap/Shoulder Belt . 15........................Seats, Adjusting the . 73

...............................Serial Number . 220...........................Service Intervals . 165...........................Service Manual . 237

...........Service Station Procedure . 126..........................Setting the Clock . 117

.....Shift Lever Position Indicator . 143........................Shift Lock Release . 146

....................................Side Airbags . 26................................Off Indicator . 28

Side Marker Lights, Bulb..............................Replacement . 181...............................Signaling Turns . 62

............................................Skylight . 83.....................................Snow Tires . 191

Index

R

S

VI

０５／０９／１３　２０：１１：５１　３１ＳＣＶ６３０　０２４９　

＊

CONTINUED

..................................Sound System . 94......................................Spare Tire . 196......................................Inflating . 196

............................Specifications . 223....................Specifications Charts . 222

................................Speed Control . 120..........SRS, Additional Information . 23

...Additional Safety Precautions . 29.............................Airbag Service . 28

How the Side Airbag Off......................Indicator Works . 28

..How the SRS Indicator Works . 27How Your Front Airbags

.........................................Work . 24...How Your Side Airbags Work . 26

........................SRS Components . 23.............................SRS Indicator . 27, 55

....START (Ignition Key Position) . 69..............State Emissions Testing . 230

.......................Starting the Engine . 140In Cold Weather at High

..................................Altitude . 140................With a Dead Battery . 205

........Steam Coming from Engine . 207Steering Wheel

..................................Adjustment . 64

.............Anti-theft Column Lock . 69.....................Stereo Sound System . 94

....................Storing Your Vehicle . 194Supplemental Restraint

................................System . 11, 23

......................................Servicing . 28.........................SRS Indicator . 27, 55

...................System Components . 23..................................Synthetic Oil . 171

Tailgate............................Open Indicator . 57

.................................Opening the . 72..........Taillights, Changing Bulbs . 182

.Taking Care of the Unexpected . 195Technical Descriptions

......DOT Tire Quality Grading . 224.....Emissions Control Systems . 227

..........State Emissions Testing . 230Three Way Catalytic

...............................Converter . 229.................................Tire Labeling . 226

.......................Temperature Gauge . 59..............Tether Anchorage Points . 43

............................Theft Protection . 116..Three Way Catalytic Converter . 229

..................Tilt the Steering Wheel . 64..........................Time, Setting the . 117

....................................Tire Chains . 192.........Tire, How to Change a Flat . 197

...........................Tire Information . 224...............................................Tires . 187

..............................Air Pressure . 188.........................Checking Wear . 189..........................Compact Spare . 196

....DOT Tire Quality Grading . 224......................................Inflation . 187

..................................Inspection . 189..............................Maintenance . 189

...................................Replacing . 190......................................Rotating . 190

...........................................Snow . 191............................Specifications . 223

................................Tire Chains . 192...................Tools, Tire Changing . 197

Index

T

IND

EX

VII

０５／０９／１３　２０：１１：５５　３１ＳＣＶ６３０　０２５０　

＊

＊

＊

＊

＊＊

.................Vehicle Capacity Load . 133......................Vehicle Dimensions . 222

....Vehicle Identification Number . 220.............................Vehicle Storage . 194

........................................Ventilation . 92.................................................VIN . 220

..................................Viscosity, Oil . 170

Towing.....................................A Trailer . 151

................................Emergency . 217...Equipment And Accessories . 153

.............................Weight Limit . 151

.............................Trailer Loading . 152......................Trailer Towing Tips . 155

...........................Traction Devices . 192Transmission

Checking Fluid Level,..............................Automatic . 175

Checking Fluid Level,...................................Manual . 176

..................Fluid Selection . 175, 176..............Identification Number . 220.............Shifting the Automatic . 143

..................Shifting the Manual . 141...................................Treadwear . 224

.......................................Trip Meter . 58....................................Turn Signals . 62

Unexpected, Taking Care..........................................of the . 195

..Uniform Tire Quality Grading . 224

........................Unleaded Gasoline . 124.......Used Oil, How to Dispose of . 172

.............WARNING, Explanation of . ii.........Warning Labels, Location of . 48

..................Warranty Coverages . 235Washers, Windshield

........Checking the Fluid Level . 174.....................................Operation . 61

Wheels...............Adjusting the Steering . 64............Alignment and Balance . 189

...............................Nut Wrench . 198

Windows..................Operating the Power . 81

...........................Rear, Defogger . 63Windshield

.......................................Cleaning . 61.....................................Defroster . 93

.....................................Washers . 174Wipers, Windshield

.......................Changing Blades . 186.....................................Operation . 61

....................................Worn Tires . 189.....Wrecker, Emergency Towing . 217

: U.S. only: Canada only

Index

U

V

W

VIII

０５／０９／１３　２０：１２：００　３１ＳＣＶ６３０　０２５１　

IX

０５／０９／１３　２０：１２：０２　３１ＳＣＶ６３０　０２５２　

Service Information Summary

Gasoline:

Fuel Tank Capacity:

Recommended Engine Oil:

Automatic Transmission Fluid:

Brake Fluid:

Tire Pressure (measured cold):

Spare Tire Pressure:

Manual Transmission Fluid:

Rear Differential Fluid:

Power Steering Fluid:

15.9 US gal (60 )

4.4 US qt (4.2 )

Unleaded gasoline, pump octanenumber of 87 or higher.

API Premium grade 5W-20detergent oil (see page ).

Oil change capacity (includingfilter):

Honda Heavy Duty Brake FluidDOT 3 preferred, or a DOT 3 orDOT 4 brake fluid as a temporaryreplacement (see page ).

Honda ATF-Z1 (AutomaticTransmission Fluid) preferred, ora DEXRON III ATF as atemporary replacement (see page

).

Front:

Rear:32 psi (220 kPa , 2.2 kgf/cm )

34 psi (235 kPa , 2.4 kgf/cm )

60 psi (420 kPa , 4.2 kgf/cm )

Honda Manual TransmissionFluid preferred, or an SAE 10W-30or 10W-40 motor oil as atemporary replacement (see page

).

Capacity (including differential):2.0 US qt (1.9 )

Honda Dual Pump Fluid. Do notuse ATF.

Capacity:1.1 US qt (1.0 )

Honda Power Steering Fluidpreferred, or another brand ofpower steering fluid as atemporary replacement. Do notuse ATF (see page ).

170

175

177

178

176

０５／０９／１３　２０：１２：１９　３１ＳＣＶ６３０　０２５３　

Documents

© 2006 Honda Motor Co., Ltd.owners.honda.com/assets/OWNERLINK/Model/own_man/... · CITY STATE/PROVINCE ZIP CODE/ ... Your selection of a 2006 Honda Element was a wise ... significantly