Headshok Damper Cartridge Castle Tools Publication Title: Publication No. 115923.PDF October 2003 This document online at: http://www .cannondale.com/bikes/tech/ © 2003 Cannondale Bicycle Corporation - All Rights Reserved Contact Us: Cannondale Bicycle Corporation 172 Friendship Road Bedford, Pennsylvania 15522 (Voice): 1-800-BIKEUSA (Fax): 814-623-6173 [email protected] Cannondale Australia Unit 6, 4 Prosperity Parade Warriewood N.S.W 2102 Australia Phone(02)9979 5851 Fax(02)9979 5688 [email protected] Cannondale Japan 12-5 Harayamadai 5-cho Sakai City Osaka, Japan 590-0132 (Voice): 011.81.722.99.9399 (Fax): 0722-93-6166 [email protected] Cannondale Europe mail: Postbus 5100 visits: Hanzepoort 27 7570 GC Oldenzaal Netherlands (Voice): +31 541 573580 (Fax): 31-5415-14240 [email protected] Tech Note CAUTION: Always carefully insert the castle tool. Scratch marks or nicks to the damper shaft will result in oil leaks. Avoid touching the damper shaft with the tool. Trim and glue and old tire tube or duct tape to line the tool. Cannondale Tool P/N Fits cartridges: HDTL176/ • DD10 HDTL145/ • DD15 • DD25 HDTL146/ • FT50 • DD50 • FT70 • DD60 • FT80 • DD80 • DL70 • DL80 • DD60 HDTL147/ • MOTO 120 • FT100 • MC80 • MC60 • MC25

2003 Headshok Damper Cartridge Castle Tools Technote En

Download PDF Report

Upload
xjcai
View
1.632
Download
32

Embed Size (px)

DESCRIPTION

Fatty cartridge removal tool

Citation preview

Page 1: 2003 Headshok Damper Cartridge Castle Tools Technote En

Headshok Damper Cartridge Castle ToolsPublication Title: Publication No.

115923.PDFOctober 2003

Contact Us:Cannondale Bicycle Corporation172 Friendship RoadBedford, Pennsylvania 15522(Voice): 1-800-BIKEUSA(Fax): [email protected]

Cannondale AustraliaUnit 6, 4 Prosperity ParadeWarriewood N.S.W 2102AustraliaPhone(02)9979 5851Fax(02)9979 [email protected]

Cannondale Japan12-5 Harayamadai5-cho Sakai CityOsaka, Japan 590-0132(Voice): 011.81.722.99.9399(Fax): [email protected]

Cannondale Europemail: Postbus 5100visits: Hanzepoort 277570 GC OldenzaalNetherlands(Voice): +31 541 573580 (Fax): [email protected]

Tech Note

CAUTION: Always carefully insert the castle tool. Scratch marks ornicks to the damper shaft will result in oil leaks. Avoid touching thedamper shaft with the tool. Trim and glue and old tire tube or ducttape to line the tool.

Cannondale Tool P/N

Fits cartridges:

HDTL176/ • DD10

HDTL145/ • DD15 • DD25

HDTL146/• FT50 • DD50 • FT70 • DD60 • FT80 • DD80 • DL70 • DL80

• DD60

HDTL147/ • MOTO 120 • FT100 • MC80 • MC60 • MC25