Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
1. General Features
Enclosures are made of High Quality 0.8/1.5 mm CRCA Sheets from TATA STEELIUM
SKD design and can be easily assembled at the user site
Wall Mount Enclosures are made primarily of three colours i.e., RAL 7035, RAL 9005 and RAL 5018. However, Enclosures with di�erent colour combinations can also be made available
Necessary accessories for the complete installation of the Enclosures form part of the total system
Pick Your Accessories
Cable Manager Cantilever Tray Cooling Fan Power Distribution Unit (PDU) Mounting Hardware Rear cover
The Flat Packed Enclosures are made up of
1 Top Cover and 1 bottom-cover 2 Slide Panels with built in engineered ventilation Front door with 4 inchesToughened Glass provided with CAM Lock for safe custody or access control
Salient Features Unique – “A tomorrow brought in today” A Uni-Bolt arrangement system Provides ON Site QUICK Assembly Deskilled solution for our SKD Version ‘Carry On’ - Fully Environment Friendly Pack facilitates Logistics & Service team
Mechanical
Safe to Handle Does not have any pinch point/sharp edge which may cause serious injury during handling or �tment Full-depth mounting variations Adequate factor of safety and built-in fail-safe features
Cabling
Facilitates top & Bottom Cable Entry Adequate leeway for cable routing inside the enclosure Extra storage space for surplus cable windings Provision for cable ties and cable clips inside enclosure
A Product of
1/7
19” WALL MOUNTED ENCLOSURES
TECHNICAL LITERATURE
A Product of
Cooling
Optimized fan position and spacing for better cooling Adequate air �ow with provision for forced ventilation Adequate space for �nger guard and air �lters
2. Available Range
Range of Wall mount are de�ned by the capacity, Width and Depth.
Capacity(H) Width(W) Depth(D) 04 U 550 450 06 U 600 500 09 U 600 500 12 U 600 500 15 U 600 500
3. Technical Characteristics
Certi�cations
Degrees of Ingress Protection (IP 20), in accordance with IEC 60529 Degree of Impact Protection (IK 08), according to IEC 62262 Corrosion Resistance through Salt Spray test according to ISO 9227 Weight carrying capacity 60 Kg ( Certi�ed through In-house Tests ) Process validations through NABL accredited Laboratory ensures a Compliant and Robust Product
Powder Coating
Fine texture �nish achieved through a combination of Epoxy and PU powder Powder Coating Booth is designed to prevent excessive powder loss to comply with Environment regulations Powder Coating Booth deploys modern Recycle & Auto Reciprocator system to deliver required Dry Film Thickness. Standard being set for 60-80 Microns for our product range
The powder coating ensures the following
60 – 80 Micron powder deposit Fine Texture Finish for Aesthetic appearance High Scratch resistance against any sharp object
Electrical Continuity of the conductive parts
Provision of earthing Stud facilitates on-site earthing DIN standard earthing solutions are available on request
2/7
Width & Depth are in mm
A Product of
Technical Characteristics
S No. Manufacturing process Compliance
1 ISO 9000 /14000 / ROHS compliance ISO 9000 /14000 / ROHS
2 Raw Material Cold Rolled Sheet Steel, Glass, Synthetic Rubber(Knockout Edge Protector/Cover), Epoxy Hybrid Powder, Hardware
3 Process and Chemical details ( Eco ISO and RoHS Certi�cates for Purchased Items friendly parameters) 4 Powder Coating As per Industry Norms
5 Powder details RoHS Certi�ed
6 Raw Material for chemicals and Part of Vendor Audits Powders from reputed manufacturers 7 Shearing Turret Punching Machine
8 Bending Press Brake Operation
9 Welding CO2 MIG
10 Multi Stage Inspection process RM Inspection, WIP Inspection, Final Inspection
11 Packing and Logistics 5 Ply packing of appropriate GSM with Separators inside
3/7
Capacity(H) Width(W) Depth(D) Average Weight (Kgs) 04 U 550 450 8.3 06 U 600 500 11.2 09 U 600 500 14.5 12 U 600 500 17.0 15 U 600 500 19.6
Width & Depth are in mm
A Product of
4. General Arrangement
4/7
Standard Model
Capacity Fan RearSpacing
Storage VolumeFunctionalWidth
Size Metrics mm Surplus CableCoolingCable
Provision
Overall Size (+ 1) UsableDepth (+ 1)
U (Inch) Height Width Depth Rack Mount Qty Rear Gap Length X Width X mm Height mm
4U 19” 262 450 450 388 1 20 498 X 448 X 35
6U 19” 352 600 500 435 2 20 528 X 498 X 35
9U 19” 490 600 500 435 2 20 528 X 498 X 35
12U 19” 620 600 500 435 2 20 528 X 498 X 35
15U 19” 757 600 500 435 2 20 528 X 498 X 35
A Product of
5. Standard Accessories
Cable Manager
The Wall mount Enclosures have the provision for mounting Cable managers for standard 19” rack dimension
The Cable Manager Back Plate is made of CRCA Steel coated CR sheet while the loop is of PVC material
Cantilever Tray
The Wall Mount Enclosures can be equipped with cantilever trays. Cantilever trays are made of TATA STEELIUM sheet and powder coated
These trays have adequate slots for ventilation.
They can carry lighter weights only
Distribution Unit
PDU is one of the most critical element of the Enclosure con�guration and can be supplied as per user speci�cation.
Selection criteria include the number of sockets, electrical rating, overall dimension and the other hardwares like Plug and Cable
The range of Electrical Ratings for the Power Distribution Unit are as follows:
Rated Voltage – 220 to 240 VAC, 50Hz Full Load Current - 6 to 16Amp Full Load Power – 1.2 Kva to 3 Kva
5/7
Cooling Fan
The Wall Mount Enclosures have provision for mounting AC Axial Fan(s) of outer dimension 120 x 120 x 38 mm for exhaust of hot air
Fan has an Air �ow of 95 CFM under static pressure with a maximum decibel level of 42 dB from a distance of 1 Metre
These fans are IP 42 protected with a MTBF of around 70K hours at 40º C. The fan has a 95 CFM capacity without using any of the equipment installation space
Connections and Replacement is Safe & user friendly through a termination arrangement
A Product of
6/7
A Product of
7/7