12 Volt Vacuum Pump Installation Brake Suspension Specialists 12 Volt Vacuum Pump Installation Instructions Instructions: 1. Mount the vacuum pump. 2

  • View
    239

  • Download
    1

Embed Size (px)

Text of 12 Volt Vacuum Pump Installation Brake Suspension Specialists 12 Volt Vacuum Pump Installation...

  • Classic Performance Products, Inc. 714.522.2000 | fax 714.522.2500 175 E. Freedom Avenue | Anaheim, CA 92801 | www.classicperform.com

    Steering, Brake & Suspension Specialists

    12 Volt Vacuum Pump Installation Instructions

    Instructions:1. Mount the vacuum pump.2. Connect the vacuum fittings, hoses, switch, and filter as shown in the diagram.3. Connect the black wire from the vacuum pump to a ground.4. Connect the red wire from the vacuum pump to one of the terminals on the vacuum switch.5. Connect the other terminal of the vacuum switch to +12 volts when the ignition key is turned on. (Be sure that

    the +12 volt circuit has a fuse).

    For technical help call Classic Performance Products Monday thru Friday 8:30am to 5:00pm at (714) 522-2000.

    Rev. 7/9/2008

    Parts List:1 ea. Vacuum Pump1 ea. Vacuum Switch1 ea. 3/8 Barbed T Fitting1 ea. 1/8-NPT T Fitting1 ea. Exhaust Filter1 ea. 3/8 Vacuum Hose2 ea. Vacuum Check Valve3 ea. 1/8-NPT x 3/8 Barbed Fitting