11 - ENCLOSURES & SWITCHBOARD SYSTEMS - IPD ... GROUP LIMITED Phone: 1300 556 601 Product Catalogue v-15 359 ENCLOSURES & 11SWITCHBOARDS 11 - ENCLOSURES & SWITCHBOARD SYSTEMS Techno

IPD GROUP LIMITED Phone: 1300 556 601 www.ipdgroup.com.au

Product Catalogue v-15 359

ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

11 - ENCLOSURES & SWITCHBOARD SYSTEMS

Techno Modular Switchboard System

Instant Panel Modular Enclosures

Mild Steel & Stainless Steel Enclosures

APO Modular Polyester Boxes

ARIA Universal Polyester Cabinets

DK Cable Junction Boxes

MI Modular Enclosures

Ventilation & Heating Systems

Modular Switchboards & Metal Enclosures 360

Modular switchboard system TECHNO 361Instant panels 373

Mild steel enclosures 374Accessories 376

Stainless steel enclosures 378316 Grade 379304 Grade 379Accessories 379

Terminal boxes 380Mild steel 381Stainless steel 381Accessories 381

Fandis enclosure ventilation & heating systems 382

Insulated Enclosures 385

GE APO industrial enclosures 387Accessories 387

GE ARIA industrial cabinets 389Accessories 390

Hensel DK cable junction boxes 392

Hensel KF cable junction boxes 392

Hensel MI Polycarbonate enclosures 394 H-Base home automation enclosures 396 Flexibars - flexible copper braids 397

Flexibars


360 Product Catalogue v-15

1. TECHNO Modular Switchboard System up to 7100A

2. INSTANT PANEL Modular Enclosure System

3. Wall Mounting Enclosures – Mild Steel & Stainless SteelMild Steel – Grey & Orange.Accessories for Mild Steel Enclosures. Stainless Steel Grade 316 & 304.Accessories for Stainless Steel Enclosures.

4. Terminal Boxes – Mild Steel & Stainless SteelMild Steel - Grey.Stainless Steel Grade 316.Accessories for Terminal Boxes.

5. Accessories for Metal Enclosures

MODULAR SWITCHBOARDS + METAL ENCLOSURES



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

Features:- A fully modular switchboard system that complies with the new IEC61439-1 & 2 design verification standards..- User friendly Estimation & Design software.- Fixed, demountable or fully withdrawable options all with internal arcing-fault containment in accordance with AS/N2S 3439.1.2002 Annex ZD.- Internal segregation up to FORM 4b.- Busbars up to 7100A.- Short circuit withstand current up to 100kA / 3s.- Insulated bus systems up to 6300A.

Benefits:- Available off the shelf delivered flatpack to you.- Complete assembly assistance offered by IPD.- Very flexible - progressive & last minute design changes can be accomodated easily with little or no cost impact.- Enables you to offer an enhanced solution to win jobs & improve your profitability.- Quick and easy to assemble resulting in cost savings & improved utilization of your labour resources.- Available in Grey RAL7032 or Orange RAL2000.- Technical & Engineering support from IPD throughout Australia.

Providing Consulting Engineers and Switchboard Builders the BUILDING

BLOCKS for advanced & cost effective solutions

TECHNO MODULAR SWITCHBOARD SYSTEM



FRAMEWORK

The framework is made up of:

- Base corners- Plinth profiles- Corners- Corner bars- Cross bars

Structure members range from 200mm up to 2400mm.

The structure is made from 2mm cold rolled electrogalvanised powder coated steel profiles with tapped holes at every 25mm forming a 25mm grid.

Untapped holes are located at every 12.5mm.

The base profiles include pre-cut holes to facilitate lifting of the switchboard.

All structural members of the framework are screwed together with captive screws to ensure rigidity & earth continuity.

Modular indicators are provided at every 200mm for easy identification during assembly.

PLINTH & CORNER BARARRANGEMENT

CROSS BAR

CORNER & CORNER BARS



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

INTERNAL PLATES + CLADDING

Internal separation up to Form 4b can be achieved using standard parts;

- Mounting plates- Separation plates- Standard compartments

Internal separation plates and mounting plates are modular, metallic and offer IP2X protection. A range of insulated separation plates are also available.

All internal parts are painted white.

FINISH:

Doors and covers are dished and made of 1.5mm mild steel with an epoxy polyester powder coated smooth finish.

2mm doors and covers are available on request.

Flat covers are available as an option.

The framework and cladding is stocked in Grey RAL 7032 & Orange RAL 2000.

Doors may be hinged left or right.

Gaskets are continuous and are formed from high grade polyurethane to ensure good sealing & a high degree of protection up to IP55.

SEPARATION & MOUNTING PLATES

COVERS

DOOR



BUSBAR SYSTEM

The busbar system is designed around 10mm wide flat bars and has been tested extensively for ratings up to 7100A / 100kA.

Busbars can be mounted at the top or bottom & can be arranged for front or back access.

The busbar holders have a unique clamping method that negates the need for drilling holes.

The holders are modular in size to suit all tier widths.

The system includes a wide variety of busbar holders from 250A-7100A that offers flexibility to design various switchboard arrangements.

BUSBAR SYSTEMWITH BH SUPPORTS

BUSBAR SYSTEMWITH UBH SUPPORTS

INSULATEDBUSBARS



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

COMPARTMENTS - FIxED TYPE

Fixed type compartments to Form 3a, 3b & 4a are available in modular sizes from 400w x 200h x 200d up to 600w x 600h x 400d.

FORM 4b can be achieved using cable boxes.Compartments are made up of 1.2mm mild steel, painted white and include mounting plates.

Larger size compartments are formed using separation plates.

Compartments come flat and are bent into shape using a simple bending tool.

Knock outs are included for incoming & outgoing connections along with a set of insulated + metal gland plates.

FIXED TYPE COMPARTMENTS

CABLE BOX



COMPARTMENTS - FULLY WITHDRAWABLE

Fully withdrawable compartments are available rated up to 630A.

Compartment sizes range from 200W x 200H x 400D up to 600W x 1000H x 400D mm.

Compartments provide 3 distinct positions - INSERTED, TEST/ISOLATED and FULLY WITHDRAWN with position indicators and padlocking features.

Earth contacts that make first and break last are provided as a safety feature. Main switch shaft interlocks and compartment interlocks are also provided for added safety.

Heavy duty stainless steel handles and mechanism offer years of reliable operation.

Internal segregation of up to Form 4b is maintained to ensure the highest level of material safety.

DEMOUNTABLE UNITS

Demountable cells are in all sizes from 400w x 200H up to 600w x 600h.

Earth contacts that make first and break last are provided.

Doors may be hinged to the structure or as an option, may be fixed to the demountable cell itself. The cell design suits outgoings to the left or right as needed.

6.2.4 FULLY WITHDRAWABLECOMPARTMENT

4.2.4 FULLY WITHDRAWABLECOMPARTMENT

COMPARTMENTS - DEMOUNTABLE



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

INTERNAL ARCING FAULT CONTAINMENT

TECHNO has been successfully tested for Internal Arcing Fault Containment to AS/NZS 3439.1:2002 Annex ZD. These tests have been carried out on Fixed, Demountable and Fully Withdrawable compartments using GE devices. Tests have been done at 415V and at 690V on circuit breakers, fuse switches and air circuit breakers with the highest rated device being an ACB rated 2000A. Tests have also been done within the busbar chamber in accordance with IEC1641.

All tests were carried out with stock standard components. The parts are designed in a way to release the overpressure within the compartments away from the front and to the top of the switchboard thus providing operator safety in the event of a fault.

Chimney



DESIGN & ESTIMATION SOFTWARE

The ELSTEEL PANEL DESIGNER is a revolutionary Windows based software program for designing switchboards of just about any size in only a matter of minutes.

This software is very user friendly and allows boards to be designed and laid out quickly.

Changes and modifications to designs are easily done.

The software provides switchboard layout drawings along with the TECHNO parts list. It can also provide a complete list of the electrical components selected for the switchboard.

ICAD and IDRAFT are Cad based software programs used in the design + estimation of TECHNO switchboards. These softwares allow designers to generate isometric drawings along with parts lists.



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

CONSTRUCTORS MANUAL

The CONSTRUCTORS MANUAL is a comprehensive guide in full colour that includes all TECHNO parts listed with part numbers, description, weights and pack quantities.

The manual also includes assembly pictures, technical specifications, selection guides, inspections and check lists necessary for consultants, engineers and switchboard builders.

The ASSEMBLY INSTRUCTIONS MANUAL provides step-by-step instructions on the assembly of TECHNO switchboards.

The manual provides precise assembly methods along with clear pictures and is a useful tool for switchboard builders, mainly for new users.



ACCREDITATION / TRAINING

To ensure that TECHNO switchboards are built to standards and are in accordance with the type test requirements, IPD Industrial Products offers training and accreditation to switchboard builders. Refresher courses and updates are provided to ensure that Techno users are kept abreast of product developments and changes.

The training provides in-depth information on the various parts and accessories available within the Elsteel modular enclosure range, effective and practical design methods, exposure to the extensive type testing done on the TECHNO system and simplified estimating using EPD & ELCAD softwares.

IPD also offer technical and engineering support nationally to ensure that customers receive adequate assistance during design and assembly.

Group Training Classes

Techno Training Centre

Demonstration & Training

Technical Demonstration



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

REFERENCES

TECHNO is used in over 30 countries around the world. Over the last few years, TECHNO has built up several impressive references. In Australia and New Zealand, hundreds of TECHNO ModularSwitchboards have been supplied for every possible application.

AUSTRALIA & NEW ZEALAND

- Stadium Australia, Sydney

- M5 East Tunnel, NSW

- Emirates Wolgan Valley Resort, NSW

- Parramata Rail Link, NSW

- Lane Cove tunnel, NSW

- Westmead Hospital, NSW

- Tamworth Hospital, NSW

- Citipower, VIC

- Eastlink Freeway, VIC

- Melbourne Water, VIC

- BAE Systems, VIC

- Perth Metro Rail, WA

- BHP Billiton Yandi III Ore Handling Facility, WA

- Playford Power Station, SA

- Western Mining Company, SA

- Brisbane Harbour Cruise Ship Terminal, QLD

- Queensland Emergency Operations Centre, QLD

- Australian Super Hornets Base Amberley

(RAAF), QLD

- Merimac Waste Water, QLD

- Townsville Waster Water Treatment Plant, QLD

- HMAS Waterhen, ADI

- Comalco, TAS

- Newmont Granite Gold Mine, NT

- Dreamworld Water Park, Gold Coast

- Telstra

- Woolworths

- Bluescope Steel

- Onesteel



TECHNICAL DATA

Base Frame 2mm mild steel powder coated in black (RAL 9005)

Corners Aluminium die cast powder coated in grey (RAL 7032) or Orange (RAL2000)

Corner Bar / Cross Bar Electro galvanised 2mm powder coated in grey (RAL 7032) or Orange (RAL2000)

Doors / Covers Mild steel 1.5mm powder coated in grey (RAL 7032) or Orange (RAL2000). 2mm available as an option.

Door Stabiliser Mild steel 20 x 20 x 1.5 square pipe powder coated in grey (RAL 7032) or Orange (RAL2000)

Mounting Plate Mild steel 2mm powder coated in white (RAL 9010)

Separation Plate Mild steel (2 x 2, 2 x 4, 2 x 6, 4 x 4, 4 x 6) 1mm. All other sizes 1.2mm. Painted white RAL 9010

Flat Cover Mild steel 1.5mm painted in grey (RAL 7032) or Orange (RAL2000)

Panel Assembly Kit Mild steel 3mm zinc plated

Cable Holder Mild steel 1.5mm to 2mm painted white (RAL 9010)

Lifting Eyes Mild steel 3mm powder coated in black (RAL 9005)

Wall Mounting Brackets Mild steel 3mm powder coated

Busbar Holder Self-extinguishing fibre material / reinforced PC

Fish Plate Copper 10mm

H to V Connectors Copper 10mm

Busbar Tap-Off - 21000 Dia 10mm zinc plated

- 21010 Copper 5mm

- 21020 Copper 5mm

- 21030 M.S. 3mm zinc plated

Bracket for Earth Conductor Mild steel 3mm zinc plated

Copper Spacers Copper, 30mm diameter, 5 to 50mm in width

MATERIAL SPECIFICATION

TECHNICAL DATA OF TECHNO MODULE SYSTEM GENERAL DATA Applications Low voltage power distribution, motor control centres, PLC & DCS panel boards Installation Indoor Mounting possibilities Floor standing / Wall mounting Panelling standard colour RAL7032/2000 (inquire for non-standard colours) Coating Epoxy/polyester powder, thickness >50µm

MECHANICAL DATA Field/Tier Arrangement Front connected / back to back Cable Entry Top / Centre / Bottom Access Front/Rear IP Rating IP41, IP42, IP54, IP55 Form of Segregation 1, 2a, 2b, 3a, 3b, 4a, 4b / Form 4 Type 1-7 Max. dimensions of a transport section (basic module 200 x 200 x 200) Width - 2200 Height - 2400 (can be extended) Depth - 2200

ELECTRICAL DATA Rated operations voltage (Ue) 415 / 690 / 1000V Rated insulation voltage (Ui) 690V / 1000V Rated frequency (f) 50Hz Rated impulse voltage (Uimp) 6-8kV Rated current (In) for TM panels Up to 7100A (see pg. 9.05 for more info.) Rated short time current (Icw) Up to 100ka / 1s & 50kA / 3s Pollution degree 3 Earthing systems TN-C, TN-S, TN-C-S, TT, IT

TEST / APPROVALS Type test Fully type tested according to IEC/EN 60439-1 Internal Arcing Fault test According to IEC61641 & AS/NZS 3439.1:2002 Vibration test According to IEC68-2-6 & IEC68-2-36 Seismic test According to IEC68-3-3 EMC verified According to IEC60439-1 clause 8.2.8 Lloyd’s Registered Certificate No. 02/70003



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

ELSTEEL INSTANT PANELS

Features & Benefits:- Available in Grey RAL7032 & Orange RAL2000.- IP55 mild steel powder coated finish.- Available as flat-packed - fast and easy to assemble.- Mounting plates & plinths are included.- Wall mounting brackets are available as an option.- Assembly instructions included.- Tools sold separately.- Modular flexibility offers options such as individual doors, covers, compartments, cable zones & other forms of internal segregation.- Ideally suited for Mechanical Services applications to build medium to large size control panels, distribution panels and lighting control panels.

Dimensions No. of W x H x D Doors & Grey Orange (mm) Mounting RAL 7032 RAL 2000 Pans 600 x 1400 x 200 1 / 1 INPL06142-K INPL06142A-K 800 x 1400 x 200 1 / 1 INPL08142-K INPL08142A-K 800 x 1600 x 200 1 / 1 INPL08162-K INPL08162A-K 800 x 1800 x 200 1 / 1 INPL08182-K INPL08182A-K 800 x 2000 x 200 1 / 1 INPL08202-K INPL08202A-K 800 x 1600 x 300 1 / 1 INPL08163-K INPL08163A-K 800 x 1800 x 300 1 / 1 INPL08183-K INPL08183A-K 800 x 2000 x 300 1 / 1 INPL08203-K INPL08203A-K 1200 x 1600 x 300 2 / 2 INPL12163-K INPL12163A-K 1200 x 1800 x 300 2 / 2 INPL12183-K INPL12183A-K 1200 x 2000 x 300 2 / 2 INPL12203-K INPL12203A-K 1600 x 1600 x 300 2 / 2 INPL16163-K INPL16163A-K 1600 x 1800 x 300 2 / 2 INPL16183-K INPL16183A-K 1600 x 2000 x 300 2 / 2 INPL16203-K INPL16203A-K 800 x 1600 x 400 1 / 1 INPL08164-K INPL08164A-K 800 x 2000 x 400 1 / 1 INPL08204-K INPL08204A-K 1200 x 1600 x 400 2 / 2 INPL12164-K INPL12164A-K 1200 x 2000 x 400 2 / 2 INPL12204-K INPL12204A-K 1600 x 1600 x 400 2 / 2 INPL16164-K INPL16164A-K 1600 x 2000 x 400 2 / 2 INPL16204-K INPL16204A-K *Elsteel Instant Enclosures can be assembled in various other sizes/configurations.

Please contact IPD for pricing and availability.

Description Hand tools Part No. Straight head allen 4mm SHA14470 Ball head allen 4mm BHE14475 Ball head allen 5mm BHA14480 Ball head allen 6mm BHA14490

Blade toolsBlade for air ball head 4mm BLA14510 Blade for air ball head 5mm BLA14520 Blade for air ball head 6mm BLA14530 Wall mounting brackets, Instant Panels INWB80400



MILD STEEL ENCLOSURES

Features:

Material:Mild Steel.

Thickness: 1mm: 200w x 200h x 150d to 400w x 300h x 200d.1.2mm: 400w x 400h x 150d to 400w x 600h x 250d.1.5mm: 400w x 700h x 200d and above.

Mounting Plate:2mm Alu-zinc. Sizes above 800mm high have folded edges for added strength.

Construction:Fully welded. The front lip of the enclosure is folded to provide rigidity and forms a gutter to keep liquids from the gasket. Four wall mounting holes on the back panel of the enclosure are provided with plastic plugs that protect the body when the enclosure is placed on its back.

Door:Folded edges provide rigidity to the door. Doors open up to 120°, can be hinged right or left and can be easily removed with lift-off type spring pin hinges. The gasket is continuous formed polyurethane which provides excellent sealing and a high IP rating over a very long life. Doors are provided with standard double wing locks. A choice of locks and handles are available.

Gland Plates:Gland plates are provided with gaskets and fixing studs.

Finish:Epoxy polyester powder coated with a textured finish.Grey - RAL7032.Orange - RAL2000.

Rating & Approvals:Rated IP65, UL & CSA approved.

Includes double wing locks with a choice of locks and handles

available as optionsFolded reinforced lip provides

strength and keeps liquids away from the gasket

Pre-drilled holes with plastic seals allows door to be hinged

to the left or right

Removable gland plates with fixing

studs are includedEarth studs are provided on the door and inside

the enclosure

Galvanized mounting plate included

Concealed lift-off pin hinges

Formed polyurethane gasket offers good sealing with a

high IP rating



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

MILD STEEL ENCLOSURES

MILD STEEL IP65 ENCLOSURES - GREY

Dimensions (mm) Locks No. of Gland Weight W x H x D Plates (kg) Part No. 200 x 200 x 150 1 1 2.91 BM20215G 200 x 300 x 150 1 1 3.97 BM20315G 250 x 300 x 150 1 1 4.92 BM25315G 300 x 300 x 150 1 1 5.63 BM30315G 300 x 300 x 200 1 1 6.24 BM30320G 300 x 400 x 150 2 1 7.06 BM30415G 300 x 400 x 200 2 1 7.77 BM30420G 400 x 300 x 150 1 1 7.06 BM40315G 400 x 300 x 200 1 1 7.77 BM40320G 400 x 400 x 150 2 1 8.86 BM40415G 400 x 400 x 200 2 1 9.67 BM40420G 400 x 500 x 150 2 1 10.66 BM40515G 400 x 500 x 200 2 1 11.57 BM40520G 400 x 500 x 250 2 1 13.77 BM40525G 400 x 600 x 200 2 1 15.87 BM40620G 400 x 600 x 250 2 1 17.13 BM40625G 400 x 600 x 300 2 1 17.48 BM40630G 500 x 500 x 200 2 1 18.52 BM50520G 500 x 600 x 200 2 1 18.94 BM50620G 500 x 700 x 200 2 1 21.59 BM50720G 500 x 700 x 250 2 1 23.11 BM50725G 600 x 400 x 200 2 2 16.18 BM60420G 600 x 400 x 300 2 2 18.71 BM60430G 600 x 600 x 200 2 2 22.32 BM60620G 600 x 600 x 300 2 2 25.37 BM60630G 600 x 700 x 200 2 2 25.49 BM60720G 600 x 800 x 200 3 2 28.57 BM60820G 600 x 800 x 250 3 2 30.35 BM60825G 600 x 800 x 300 3 2 32.13 BM60830G 600 x 1000 x 200 3 2 34.75 BM601020G 600 x 1000 x 300 3 2 36.00 BM601030G 600 x 1200 x 200 3 2 40.92 BM601220G 600 x 1200 x 300 3 2 42.52 BM601230G 800 x 800 x 300 3 2 46.20 BM80830G 800 x 1000 x 200 3 2 44.45 BM801020G 800 x 1000 x 250 3 2 46.73 BM801025G 800 x 1000 x 300 3 2 49.02 BM801030G 800 x 1200 x 250 3 2 48.70 BM801225G 800 x 1200 x 300 3 2 51.08 BM801230G 1000 x 1000 x 300 3 2 53.30 BM101030G 1000 x 1200 x 300 3 2 61.90 BM101230G 1000 x 1200 x 400 3 2 65.70 BM101240G

200 x 300 x 150 1 1 3.97 BM20315A 400 x 400 x 200 2 1 9.67 BM40420A 400 x 600 x 200 2 1 15.87 BM40620A 500 x 700 x 200 2 1 21.59 BM50720A 600 x 400 x 200 2 2 16.18 BM60420A 600 x 400 x 300 2 2 18.71 BM60430A 600 x 600 x 200 2 2 22.32 BM60620A 600 x 600 x 300 2 2 25.37 BM60630A 600 x 800 x 200 3 2 28.57 BM60820A 600 x 800 x 300 3 2 32.13 BM60830A 600 x 1000 x 200 3 2 34.75 BM601020A 600 x 1000 x 300 3 2 38.81 BM601030A 600 x 1200 x 200 3 2 40.92 BM601220A 800 x 800 x 300 3 2 46.2 BM80830A 800 x 1000 x 200 3 2 44.45 BM801020A 800 x 1000 x 300 3 2 49.02 BM801030A 800 x 1200 x 250 3 2 50.00 BM801225A 800 x 1200 x 300 3 2 51.08 BM801230A

MILD STEEL IP65 ENCLOSURES - ORANGE



ACCESSORIES FOR MILD STEEL ENCLOSURES

Item Description Part No. Wall Mounting Bracket Set BWB50594 Wall Mounting Bracket Cover Set WBC50595

Pole Mounting System 400W* PMS50500 Pole Mounting System 500W* PMS50505 Pole Mounting System 600W* PMS50510 Pole Mounting System 800W* PMS50515 *Suits Circular Poles Ø 150 - 300mm and square poles 120 x 120 - 250 x 250mm.

Item Description Part No. Chrome T Handle Lock - Keyless THLC12130 Chrome T Handle Lock - Keyed Alike THLC12131 Chrome T Handle Profile 92268 T-HANDLE-92268 Chrome T Handle Profile CL001 T-HANDLE-CL001 Keylock Steel KELS12140 Steel Cam for above METALCAM-H-24

Keylock Profile 92268 KEYLOCK-92268 Keylock Profile CL001 KEYLOCK-CL001 Steel Cam METALCAM-BOX

IEC (double wing) Lock Plastic ELS05775 Steel IEC lock STL33030 Steel Cam for above METALCAM-H-24 Plastic IEC key ELS05783

Knob Lock Plastic KL12120

Padlock Kit BOCOV52303

Door Seal System Plastic DSES30855

Dimensions W x D (mm) Part No. 300 x 150 ELS52000 400 x 150 ELS52010 600 x 150 ELS52020 300 x 200 ELS52050 400 x 200 ELS52060 600 x 200 ELS52070 600 x 200 Orange ELS52070A 800 x 200 ELS52080 800 x 200 Orange ELS52080A

MOUNTING ACCESSORIES

LOCKS, SEALS & ACCESSORIES

BWB50594

THLC12130

KELS12140

WBC50595

PMS50500

ELS05775

KL12120

BOCOV52303

DSES30855

ENCLOSURE CANOPIES

ELS52060

Enclosure Canopies

All fixing accessories are included in the supply.



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

ACCESSORIES FOR MILD STEEL ENCLOSURES

Item Description Part No. Internal Door 400W x 400H BID44 Internal Door 400W x 500H BID45 Internal Door 400W x 600H BID46 Internal Door 600W x 400H BID64 Internal Door 600W x 600H BID66 Internal Door 600W x 800H BID68 Internal Door 600W x 1000H BID610 Internal Door 600W x 1200H BID612 Internal Door 800W x 800H BID88 Internal Door 800W x 1000H BID810 Internal Door 800W x 1200H BID812 Drilling jig for SS boxes ELS69003

Combi Rail 400W x 400H BCR44 Combi Rail 400W x 600H BCR46 Combi Rail 600W x 400H BCR64 Combi Rail 600W x 600H BCR66 Combi Rail 600W x 800H BCR68 Combi Rail 600W x 1000H BCR610

Modules Steel Din Rail Insert 400W x 400H^ 2 x 18 DINI44 Steel Din Rail Insert 400W x 600H^ 4 x 18 DINI46 Steel Din Rail Insert 600W x 400H^ 2 x 29 DINI64 Steel Din Rail Insert 600W x 600H^ 4 x 29 DINI66 Steel Din Rail Insert 600W x 800H^ 6 x 29 DINI68 Steel Din Rail Insert 600W x 1000H^ 7 x 29 DINI610 ^Combi rail required.

Item Description Part No. Louvre Gland Plate Grey 216 x 86mm LGWS28550 Louvre Gland Plate Orange 216 x 86mm LGWS28551A Steel Mesh 216 x 86 mm ELS05931 Steel Mesh 139 x 48 mm ELS05932 Gland Plate Grey 216 x 86mm SGSG51000 Gland Plate Orange 216 x 86mm SGSG51001A

Item Description W x H (mm) Part No. 400 x 600 Cable Door Kit CDK52740-K 600 x 600 Cable Door Kit CDK52750-K 600 x 800 Cable Door Kit CDK52760-K 600 x 1000 Cable Door Kit CDK52780-K 600 x 1200 Cable Door Kit CDK52790-K 800 x 800 Cable Door Kit CDK52800-K 800 x 1000 Cable Door Kit CDK52810-K Note: Cable door kit does not include Enclosures and Electrical items. Combi rail unsuitable with stainless steel enclosures.

CABLE DOOR KIT

CABLE DOOR KIT

INTERNAL MOUNTING ACCESSORIES

VENTS & GLAND PLATES

BID68

LGWS28550

BCR68

DINI66



STAINLESS STEEL ENCLOSURES

Features:

Material:Stainless Steel AISI 316 & AISI 304.

Thickness:1.2mm: 200w x 200h x 150d to 600w x 600h x 200d.1.5mm: 600w x 600h x 300d and above.

Mounting Plate:2mm Alu-zinc. Sizes above 800mm high have folded edges for added strength.

Construction:Fully welded. The front lip of the enclosure is folded to provide rigidity and forms a gutter to keep liquids from the gasket.

Door:Folded edges provide rigidity to the door. Doors open up to 120° and can be easily removed with lift-off type spring pin hinges. The gasket is continuous formed polyurethane which provides excellent sealing and a high IP rating over a very long life. Doors are provided with stainless steel double wing locks. A choice of locks and handles are available.

Finish:Wet grinding (180).

Rating & Approvals:Rated IP66, Lloyd’s Register, UL & CSA approved.

Includes stainless steel double wing locks with a choice of locks and handles available as options

Folded reinforced lip provides strength and keeps liquids

away from the gasket

Earth studs are provided on the door and inside

the enclosureGalvanized mounting

plate included

Concealed lift-off 316 SS pin hinges

Formed polyurethane gasket offers good sealing with a

high IP rating



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

STAINLESS STEEL ENCLOSURES

Dimensions (mm) Locks Weight Part No. W x H x D (kg) SS 316 200 x 300 x 150 1 5.78 BS20315-6 300 x 300 x 150 1 7.42 BS30315-6 300 x 400 x 150 2 9.06 BS30415-6 300 x 400 x 200 2 10.93 BS30420-6 400 x 400 x 200 2 13.13 BS40420-6 400 x 500 x 250 2 17.10 BS40525-6 400 x 600 x 200 2 17.52 BS40620-6 400 x 600 x 300 2 17.73 BS40630-6 500 x 500 x 200 2 17.96 BS50520-6 600 x 400 x 200 2 17.52 BS60420-6 600 x 600 x 200 2 23.63 BS60620-6 600 x 600 x 300 2 24.35 BS60630-6 600 x 800 x 200 3 29.74 BS60820-6 600 x 800 x 300 3 30.97 BS60830-6 600 x 1000 x 200 3 35.84 BS601020-6 600 x 1200 x 200 3 41.94 BS601220-6 600 x 1000 x 300 3 37.59 BS601030-6 800 x 800 x 300 3 39.30 BS80830-6 800 x 1000 x 300 3 47.63 BS801030-6 1000 x 1000 x 300 3 57.67 BS101030-6

Dimensions (mm) Locks Weight Part No. W x H x D (kg) SS 304 200 x 300 x 150 1 5.78 BS20315-4 300 x 300 x 150 1 7.42 BS30315-4 300 x 400 x 150 2 9.06 BS30415-4 300 x 400 x 200 2 10.93 BS30420-4 400 x 400 x 200 2 13.13 BS40420-4 400 x 600 x 200 2 17.52 BS40620-4 400 x 600 x 300 2 17.73 BS40630-4

Item description Part No. Wall mounting bracket set SWB60590 Stainless steel knob lock SSKL60295 T-Handle stainless steel (non-locking) 200-9374 T-Handle stainless steel (keyed alike) 200-9398

Overall Usable Size Size (mm) (mm) Locks Weight Part No. W H D W H kg SS 316 250 450 200 220 300 1 7.7 BSR253020 350 650 220 320 400 2 13.6 BSR354022 450 850 270 420 600 2 22.4 BSR456027 650 1100 350 620 800 3 43.0 BSR658035

STAINLESS STEEL ENCLOSURES - 316 GRADE

STAINLESS STEEL ENCLOSURES - 304 GRADE

STAINLESS ENCLOSURES

ACCESSORIES FOR STAINLESS STEEL ENCLOSURES

SWB60590

SSKL60295

SLOPING ROOF STAINLESS STEEL ENCLOSURES

Features:

Type: Wall mounting.Grade: AISI316. Hinges in 316.Slope: 38°

SLOPING ROOF



TERMINAL BOXES

Features:

Material: Mild Steel Stainless Steel AISI316

Thickness: 1.2mm 1.5mm

Mounting Rails: 2mm Alu-zinc. 2mm Alu-zinc.

Rating: IP55 IP66

Finish: Epoxy Polyester powder coated Wet grinding (180) with a smooth finish Grey - RAL7032

Construction:Terminal boxes are of fully welded type construction. The front lip of the enclosure is folded to provide rigidity.

Cover:The cover is lift-off type with 4 captive screws. The gasket is continuous formed polyurethane which provides excellent sealing and a high IP rating over a very long life.

Approvals:UL & CSA approved.

Mounting rails are welded to the enclosure

Earth studs are provided on the lid and inside the

enclosure

Formed polyurethane gasket offers good sealing with a high

IP rating

Front lip is returned for additional strength

The fixing pillars are located on the outside of the lip to

ensure a reliable seal



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

TERMINAL BOXES

Dimensions (mm) Weight Part No. W x H x D (kg) Mild Steel 150 x 150 x 80 1.39 TM15158-G 300 x 150 x 80 2.14 TM30158-G 200 x 200 x 80 1.98 TM20208-G 300 x 200 x 80 2.57 TM30208-G 150 x 150 x 120 1.98 TM151512-G 175 x 175 x 120 2.30 TM171712-G 300 x 150 x 120 2.84 TM301512-G 200 x 200 x 120 2.65 TM202012-G 300 x 200 x 120 3.32 TM302012-G 400 x 200 x 120 4.00 TM402012-G 300 x 300 x 120 4.24 TM303012-G

Dimensions (mm) Weight Part No. W x H x D (kg) Stainless Steel 150 x 150 x 80 1.71 TS15158-6 300 x 150 x 80 2.63 TS30158-6 200 x 200 x 80 2.43 TS20208-6 300 x 200 x 80 3.17 TS30208-6 150 x 150 x 120 2.44 TS151512-6 300 x 150 x 120 3.52 TS301512-6 200 x 200 x 120 3.26 TS202012-6 300 x 200 x 120 4.11 TS302012-6 400 x 200 x 120 4.96 TS402012-6 300 x 300 x 120 5.26 TS303012-6

Item description Part No. Mild steel wall mounting bracket set TMWMB Stainless steel wall mounting bracket set TSWMB

TERMINAL BOxES - MILD STEEL

TERMINAL BOxES - STAINLESS STEEL

INTERNAL VIEW

ACCESSORIES FOR TERMINAL BOxES

TMWMB

TM15158-G

TS15158-6 INTERNAL VIEW



ENCLOSURE VENTILATION & HEATINGFandis Ventilation, Heating and Climate Control products offer effective solutions for temperature management and control in industrial and commercial applications to enhance the performance and life of equipment within enclosures.

VIRDIS Fan Filter and Grill Filter units for ventilation and coolingFeatures:- Rated 230V AC, 50/60Hz. Units for other voltages available on request.- Colour Grey RAL7032.- Degree of protection IP54 with IP55 filters available as an option on some sizes.- Standard air flow “B” (from outside to inside) reversible for “A” flow.- Self-extinguishing according to UL94V-0.- UL & CSA approved.- Permanent sealing gasket in polyurethane foam.

ORANGIS Mechanical Thermostats and Hygrostats for efficient climate controlFeatures:- Available with NO, NC or change over contacts.- Snap-on to DIN Rail.- Screw terminal connections.- Bi-metallic sensing element.- Temperature setting knob indexed at 5°C.- Suitable for 50/60Hz.

FUCSIS Heaters and Ventilated Heaters provide heating preventing condensation within enclosuresFeatures:- Multi voltage operation.- Suitable for DIN rail mounting.- Efficient self regulating PTC element with covers made in black anodised aluminium alloy.- Suitable for 50/60Hz.



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

ENCLOSURE VENTILATION & HEATING

Size (mm) Air Flow Part No. 105 x 105 x 60 23 m³/H B flow FPF08KR230B-110 # 150 x 150 x 64 57 m³/H B flow FPF12KR230BE-110 # 204 x 204 x 90 110 m³/H B flow FPF13KPR230BE110 # 250 x 250 x 113 240 m³/H B flow FPF15KR230BE-110 # 250 x 250 x 117 360 m³/H B flow FPF15KGR230BE120 # 325 x 325 x 152 520 m³/H B flow FPF20KR230BE-120 # 325 x 325 x 142 650 m³/H B flow FPF20KGR230B-110 325 x 325 x 142 650 m³/H A flow FPF20KGR230BER12^ # Fan units can be reverse mounted for ‘A’ flow.^ Fan units can be reversed for ‘B’ flow.

Size (mm) Part No. 105 x 105 Grill Filter Set FPF08KRG-101 150 x 150 Grill Filter Set FPF12KRG-100 204 x 204 Grill Filter Set FPF13KRG-100 250 x 250 Grill Filter Set FPF15KRG-100 325 x 325 Grill Filter Set FPF20KRG-100

Description Part No. Filters for FPF08K M08FPFK Filters for FPF12K M12FPFK Filters for FPF13K M13FPFK Filters for FPF15K M15FPFK Filters for FPF20K M20FPFK *Pack qty. 6.

Description Part No. Filters for FPF13K M13FPF5K Filters for FPF15K M15FPF5K Filters for FPF20K M20FPF5K *Pack qty. 6.

SizeDescription H W D Part No. To suit FPF08 161 156 41.5 SSC-08 To suit FPF12 195 190 41.5 SSC-12 To suit FPF13 246 241 41.5 SSC-13 To suit FPF15 293 288 41.5 SSC-15 To suit FPF20 361 356 41.5 SSC-20

Rated Rated Max Air Rated Current Power Flow Weight Temp. Range (mA) (W) (m³/h) (Kg) (°C) Part No. IP24 - 230a.c. 50/60Hz 341/340 78/82 530/563 2.00 -10 + 60 TP19U230B

IP54 - 230a.c. 50/60Hz 350/334 80/80 420/460 2.1 -10 + 60 TP19U230B54

FAN FILTER UNITS

OUTLET GRILL FILTER UNITS

SPARE FILTERS IP54*

SPARE FILTERS IP55*

FPF08KR230B-110

FPF20KRG-100

FILTER

ROOF ExHAUST UNIT

TP19U230B

STAINLESS STEEL COVERS - IP55

COVERS



ENCLOSURE VENTILATION & HEATING

Description Contact Part No. Thermostat 110-250VAC 1NO TRT-10A230V-NO Thermostat 110-250VAC 1NC TRT-10A230V-NC Thermostat 230VAC 1C/O TRT-230V-S01 Hygrostat 230VAC 1C/O IGR35F

Description Rating Part No. Heater 110-240V AC/DC 15W RACP-15# Heater 110-240V AC/DC 30W RACP-30# Heater 110-250V AC/DC 45W RACM-45∆ Heater 110-250V AC/DC 60W RACM-60∆ Heater 110-250V AC/DC 80W RACM-80∆ Heater 110-250V AC/DC 100W RACM-100∆ Heater 110-250V AC/DC 150W RACM-150∆ # Connection cable supplied.∆ Terminal connection.

Description Rating Part No. Ventilated Heater 230V AC 250W RACMV-250 Ventilated Heater 230V AC 400W RACMV-400

Rated Cable Voltage Power LED Lenght Weight Va.c. W Number (mm) (kg) Part No. 230 5 12 1,800 0.20 CLG-L235 Integral on/off switch.402mm long.

THERMOSTATS & HYGROSTAT

HEATERS

VENTILATED HEATERS

TRT-10A230V-NO

RACP-15

RACMV-250

TRT-230V-S01

IGR35F

CLG-L235 - LED LAMP (LED colour - white)

CLG-L235



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

INSULATED ENCLOSURES

1. GE Industrial Enclosures

APO - Modular Polyester Boxes + Accessories.

ARIA - Universal Polyester Cabinets + Accessories.

2. HENSEL Cable Junction Boxes + Enclosures

DK Cable Junction Boxes & Accessories.

MI Modular Polycarbonate Enclosures & Accessories.

APO

ARIA

DK RANGE

MI RANGE



GE INDUSTRIAL ENCLOSURES

Features:- A range of nine boxes based on 300 mm and 185 mm modules.- The bases are made of hot moulded glass fibre reinforced polyester. These come complete with M4 threaded inserts for fixing mounting plates.- Colour light grey RAL7035.- A choice of grey polyester covers or clear polycarbonate covers.- High degree of protection IP67 (opaque cover) & IP66 (clear cover).- A high impact rating of IK10 against external mechanical impacts.- Designed for both wall and pole mounting.- High temperature rating – APO enclosures can withstand continuous temperatures up to70°C (peak temperatures up to 150°C) and the transparent polycarbonate covers resist service temperature up to 120°C.- Maintenance-free and corrosion resistant.- Self-extinguishing, flame retardant, halogen free and UV stabilised.- Rated insulation voltage Ui = 1000V.- UL listed and CSA approved.- Ideally suited for harsh external applications such as mining, shipyards, marine environments, oil installations etc.

Features:- A range of nine cabinets from 315 x 215 to 1035 x 835mm.- Colour light grey RAL7035.- The cabinets are made of hot moulded glass fibre reinforced polyester. These come complete with four threaded studs and bolts for fixing mounting plates or mounting frames.- A very high degree of protection IP65/66.- A high impact rating of IK10 against external mechanical impacts (rating IK07 for cabinets with glazed doors).- High temperature rating – ARIA cabinets can withstand continuous temperatures up to70°C (peak temperatures up to 150°C). - Maintenance-free and corrosion resistant.- Self-extinguishing, flame retardant, halogen free and UV stabilised.- Rated insulation voltage Ui = 1000V.- UL listed and CSA approved.- Ideally suited for heavy industry, steel mills, petrochemical plants and other harsh external applications such as mining, shipyards, marine environments, oil installations etc.

APO MODULAR POLYESTER BOxES

ARIA UNIVERSAL POLYESTER CABINETS



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11


Dimensions (mm) W x H x D Part No. 186 x 151 x 140 APO1 302 x 186 x 175 APO31 302 x 302 x 175 APO41 372 x 302 x 175 APO71 488 x 302 x 175 APO51 558 x 302 x 175 APO81 603 x 302 x 175 APO61 603 x 372 x 175 APO11 603 x 603 x 175 APO12 *Mounting plates ordered separately.

Dimensions (mm) W x H x D Part No. 186 x 151 x 140 APO1C 302 x 186 x 175 APO31C 302 x 302 x 175 APO41C 372 x 302 x 175 APO71C 488 x 302 x 210 APO51C 558 x 302 x 210 APO81C 603 x 302 x 210 APO61C 603 x 372 x 210 APO11C 603 x 603 x 210 APO12C *Mounting plates ordered separately.

Dimensions (mm) H x W Part No. 140 x 105 APO1MPP 228 x 139 APO31MPP 254 x 228 APO41MPP 298 x 254 APO71MPP 413 x 254 APO51MPP 484 x 254 APO81MPP 528 x 254 APO61MPP 528 x 324 APO11MPP 555 x 555 APO12MPP

Dimensions (mm) H x W Part No. 134 x 99 APO1MPST 249 x 134 APO31MPST 249 x 249 APO41MPST 319 x 249 APO71MPST 435 x 249 APO51MPST 505 x 249 APO81MPST 550 x 249 APO61MPST 550 x 319 APO11MPST 550 x 555 APO12MPST

APO - BOxES WITH GREY COVERS IP67

APO41

APO41C

APO - BOxES WITH CLEAR COVERS IP66

APO ACCESSORIES

MOUNTING PLATES - PERTINAx - 5mm

MOUNTING PLATES - STEEL - 2mm

APO41MPP

APO41MPST




Dimensions W x H x D (mm) Part No. 186 x 151 x 35 APO1DE 302 x 186 x 35 APO31DE 302 x 302 x 35 APO41DE 372 x 302 x 35 APO71DE 558 x 302 x 60 APO81DE 602 x 302 x 60 APO61DE 602 x 372 x 60 APO11DE 603 x 603 x 60 APO12DE

Item description Part No. Air Vents (IP44) APOAV

Hinge Screws (set of 2) APOHS

Padlocking set APOPADLOCK

Hinge Set Type A (grey cover) APOHA Hinge Set Type D (clear cover) APOHINGED

Mounting brackets polymide (set of 4) APOPMB

DEPTH ExTENSION FRAMES

APOAV

APOHS

APOHA

APOPMB

APOPADLOCK

APO41DE

APO ACCESSORIES



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11


Dimensions (mm) H x W x D Part No. 315 x 215 x 170 ARIA32# 415 x 315 x 170 ARIA43# 515 x 415 x 230 ARIA54 615 x 415 x 230 ARIA64 735 x 535 x 270 ARIA75 835 x 635 x 300 ARIA86 1035 x 835 x 300 ARIA108 Mounting plates ordered separately.*Cabinets with GLAZED doors are available as Indent. Please contact IPD.#Rated IP65 (1 point locking).

Dimensions (mm) H x W x D Part No. 415 x 315 x 170 ARIA43GD 515 x 415 x 230 ARIA54GD 615 x 415 x 230 ARIA64GD 735 x 535 x 270 ARIA75GD 835 x 635 x 300 ARIA86GD 1035 x 835 x 300 ARIA108GD Mounting plates ordered separately.^With central double bit 3 point locking.Available by indent only.

Dimensions (mm) H x W Part No. 250 x 150 ARIA32MPP 350 x 250 ARIA43MPP 450 x 350 ARIA54MPP 550 x 350 ARIA64MPP 650 x 450 ARIA75MPP 750 x 550 ARIA86MPP 950 x 750 ARIA108MPP *Mounting plates ordered separately.

Dimensions (mm) H x W Part No. 250 x 150 ARIA32MPST 350 x 250 ARIA43MPST 450 x 350 ARIA54MPST 550 x 350 ARIA64MPST 650 x 450 ARIA75MPST 750 x 550 ARIA86MPST 950 x 750 ARIA108MPST *Mounting plates ordered separately.

ARIA - CABINETS WITH GREY* DOORS IP66

MOUNTING PLATES - PERTINAx - 5mm

ARIA32

MOUNTING PLATES - STEEL - 2mm

ARIA43MPP

ARIA43MPST

ARIA - CABINETS WITH GLAZED DOORS IP66^

ARIA43GD




Part No. Cover Plate for ARIA32 ARIA32CP Cover Plate for ARIA43 ARIA43CP Cover Plate for ARIA54 ARIA54CP Cover Plate for ARIA64 ARIA64CP Cover Plate for ARIA75 ARIA75CP Cover Plate for ARIA86 ARIA86CP Cover Plate for ARIA108 ARIA108CP

Item description Part No. Hinge supports for cover plate ARIAHS

Air Vents (IP44) ARIAAV

Wall mounting brackets (set of 4) ARIAMBKT Stainless steel

Padlockable Handle ARIAPADLOCK

FULL COVER PLATES - PLAIN WITHOUT CUT-OUTS

ARIAMBKT

ARIAAV

ARIAPADLOCK

ARIA ACCESSORIES

ARIA43CP

ARIAAV



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

CABLE JUNCTION BOXES & ENCLOSURES

A range of tough & durable cable junction boxes in nine sizes for standard industrial and special outdoor applications including harsh environments.

Features:- Suitable for cables from 1.5mm² up to 50mm².- Halogen & silicone free, flame retardant, self extinguishing.- Good resistance to temperature.- A high impact rating of IK08 against external mechanical impacts.- Stainless steel quick fastening screws.- D & K Series: Rated IP65 Colour Light Grey RAL7035 Glow Wire Tested to 750°C- KF Series: Rated IP66 Colour Black RAL9011 Glow Wire Tested to 960°C

D…. & K…. Series:- For general industrial indoor/outdoor applications.KF…. Series:- For outdoor and/or harsh environments.

A range of four robust polycarbonate enclosures for heavy duty, harsh outdoor applications to house LV equipment including switches, isolators, circuit breakers etc.

Features:- Rated IP65.- Choice of Grey or clear covers.- Colour Grey RAL7032.- Glow wire tested to 960°C.- A high impact rating of IK08 against external mechanical impacts.- High Temperature resistance up to 120°C.- UV resistant, chemical resistant, corrosion resistant & maintenance free.- Halogen & Silicone free, flame retardant, self extinguishing.

DK CABLE JUNCTION BOxES

MI POLYCARBONATE ENCLOSURES



CABLE JUNCTION BOXES

DK

DE9220

DK CABLE JUNCTION BOxES IP65

Dimensions (mm) H x W x D Part No. 88 x 88 x 53 D8020 98 x 98 x 58 D8040 119 x 139 x 70 K8060 125 x 167 x 82 K8100 160 x 200 x 98 K8250 210 x 260 x 116 K8350 310 x 210 x 116 K8500

Dimensions (mm) H x W x D Part No. 76 x 76 x 53 DE9220* * IP55 with clip-on lid.

Dimensions (mm) H x W x D Part No. 88 x 88 x 53 KF4020 98 x 98 x 58 KF4040 119 x 139 x 70 KF4060 125 x 167 x 82 KF4100 160 x 200 x 98 KF4250 210 x 260 x 116 KF4350 310 x 210 x 116 KF4500

KF CABLE JUNCTION BOxES IP66 FOR HARSH ENVIRONMENTS

KF



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

ACCESSORIES FOR DK CABLE JUNCTION BOXES

Description Part No. DIN Rail for Kx060, KFx060 57 x 15 x 5mm TSK06 DIN Rail for Kx100, KFx100 153 x 35 x 7.5mm TSK10 DIN Rail for Kx250, Kx350 178 x 35 x 7.5mm TSK25 DIN Rail for Kx500, KFx500 290 x 35 x 7.5mm TSK50

Description Part No. Terminal Set 1.5-6mm2, Cu for D8020,D8120, D8040 5 Pole DKL04 Terminal Set 2.5-10mm2, Cu for K8060,5 Pole KKL06 Terminal Set 2.5-16mm2, Cu for K8100,capacity 63A, 5 Pole KLS10 Terminal Set 6-35mm2, Cu for K8250, K8500,capacity 102A, 5 Pole KLS25

Description Part No. Wall Mounting Bracket DKAL2

Description Part No. Circuit Labels DKBS5

DIN RAILS

TERMINAL SETS

WALL MOUNTING BRACKETS

CIRCUIT LABELS

TSK06

KKL06

DKAL2

DKBS5



POLYCARBONATE ENCLOSURES

MI ENCLOSURES WITH GREY COVERS IP65 Dimensions (mm) W x H x D Part No. 300 x 150 x 170 MI0101 300 x 300 x 170 MI0201 450 x 300 x 170 MI0301 600 x 300 x 170 MI0401 Mounting plates ordered separately.

Dimensions (mm) W x H x D Part No. 300 x 150 x 170 MI0100 300 x 300 x 170 MI0200 450 x 300 x 170 MI0300 600 x 300 x 170 MI0400 Mounting plates ordered separately.

Dimensions (mm) W x H Part No. 115 x 259 MIMP1 265 x 265 MIMP2 415 x 265 MIMP3 565 x 265 MIMP4

MI ENCLOSURES WITH CLEAR COVERS

MI INSULATED MOUNTING PLATES - 4mm

MIMP4



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

ACCESSORIES FOR MI ENCLOSURES

DIN RAILSDescription Part No. DIN Rail for MI01 134 x 35 x 15mm MITS15 DIN Rail for MI02 284 x 35 x 15mm MITS30 DIN Rail for MI03 434 x 35 x 15mm MITS45 DIN Rail for MI04 584 x 35 x 15mm MITS60 Spacer for DIN Rail Height 25mm MIDS25 Spacer for DIN Rail Height 50mm MIDS50

Description Part No. Wall Mounting Brackets MIAL4

Description Part No. MI Hinge Set for Lids MIZS20

Description Part No. MI Lid Fastener Conversion Set (tool to manual operation) MISN4 Lid Lock (includes cylinder lock, key, locking device insertion, dust cover) MIZS11

Description Part No. Ventilation Flange for MI Box IP23 MIBF20 Hinged Flap Module 1 x 6 x 18mm MIKL6 Hinged Flap Module 1 x 12 x 18mm MIKL12 kWh Meter Window Flap IP 54 NZKL54

WALL MOUNTING BRACKETS

LOCKS & TOOLS

HINGES

VENTS & FLAPSMIBF20

MIDS25

MIZS20

MISN4

MIZS11

MIAL4

MIKL6

NZKL54



H-BASE HOME & AUTOMATION ENCLOSURESA range of metal and insulated enclosures designed to house DIN mounted switching and control modules (Clipsal C BUS®, HPM, Legrand, B&R) for applications in industrial, commercial and domestic automation.

Description No. of W x H x D (mm) Modules Part No. H-BASE 400 x 400 x 200 Grey 2 x 18 Din HBM40420G H-BASE 600 x 400 x 200 Grey 2 x 29 Din HBM60420G H-BASE 600 x 600 x 200 Grey 4 x 29 Din HBM60620G H-BASE 600 x 1000 x 200 Grey 7 x 29 Din HBM601020G H-BASE 600 x 400 x 200 Orange 2 x 29 Din HBM60420A H-BASE 600 x 600 x 200 Orange 4 x 29 Din HBM60620A H-BASE 600 x 1000 x 200 Orange 7 x 29 Din HBM601020A

Description No. of W x H x D (mm) Modules Part No. H-BASE 300 x 800 x 210 5 x 12 Din HBP308021 H-BASE 550 x 650 x 210 4 x 24 Din HBP556521 H-BASE 550 x 950 x 210 6 x 24 Din HBP559521

H-BASE METAL ENCLOSURESFeatures:- Elsteel Mild Steel enclosure of Fully Welded construction.- Rated IP65.- Includes DIN front plate & mounting rails.- Available in Grey RAL 7032 & Orange RAL 2000.- Supplied fully assembled.

H-BASE INSULATED ENCLOSURES

Features:- GE double wall (outer steel wall + inner insulated extruded wall) enclosure.- Rated IP43.- A high impact rating of IK08 against external mechanical impacts.- Includes DIN front plate & mounting rails.- Colour RAL 9016.- Supplied fully assembled with circuit labels and closing handle.



ENC

LOSU

RES

&SW

ITC

HB

OA

RD

S

11

FLEXIBARS

Technical Data

Braids:- 0.20mm annealed Cu-ETP wires.- Contact areas – seamless Cu-ETP tube, solder-less pressed.Insulation:- PVC 2mm thick.- Rated insulation voltage - 1000V / Impulse Voltage – 8kV.- Rated operational temperature 105°C.- Flame retardant, self extinguishing UL94 V-0.- Nominal ratings are in acc. with protective device terminal temperature rise limit of AS3439.1 Table 2.

Nominal Rating 160A* Length L Part No. Area 30mm² 195mm ELF98394 A 14mm 270mm ELF98395 T 4.75mm 345mm ELF98396 B1 420mm ELF98397 B2 18mm 495mm ELF98398 D 570mm ELF98399 W2 20mm 645mm ELF98400 L2 34mm 720mm ELF98401 T2 4mm L4 16mm D2 11mm * Device side connection to suit cage/clamp type terminal. Nominal Rating 160A** Length L Part No. Area 30mm² 195mm ELF96633 A 17mm 270mm ELF96634 T 4.2mm 345mm ELF96635 B1 8mm 420mm ELF96636 B2 19mm 495mm ELF96637 D 8.5mm 570mm ELF96638 W2 20mm 645mm ELF96639 L2 34mm 720mm ELF96640 T2 4mm L4 16mm D2 11mm ** Device side connection to suit a wide range of manufacturers. Nominal Rating 250A Length L Part No. Area 60mm² 195mm ELF98402 A 22mm 270mm ELF98403 T 5.4mm 345mm ELF98404 B1 9mm 420mm ELF98405 B2 28mm 495mm ELF98406 D 9mm 570mm ELF98407 W2 22mm 645mm ELF98408 L2 34mm 720mm ELF98409 T2 5.4mm L4 16mm D2 11mm Nominal Rating 400A*** Length L Part No. Area 110mm² 195mm ELF98461 A 25mm 270mm ELF98462 T 7.9mm 345mm ELF98463 B1 12mm 420mm ELF98464 B2 31mm 495mm ELF98465 D 11mm 570mm ELF98466 W2 32mm 645mm ELF98467 L2 34mm 720mm ELF98468 T2 6.45mm L4 16mm D2 11mm *** To suit device side terminal width 25mm.

Flexibars Short Circuit Withstand Strength Type # Peak Cut-Off Short Time Joule Current Rated Current Integral I²t 30mm² 44.5kA peak 31.5kA / 0.01s 9.92 x 10^6 A²s 60mm² 89.1kA peak 63.0kA / 0.01s 39.7 x 10^6 A²s 110mm² 163.3kA peak 115.5kA / 0.01s 133.0 x 10^6 A²s # The short circuit protective device must interrupt the short-circuit current within 10 milliseconds and limit the peak cut-off current to be within the values given above.



FLEXIBARS

Description Qty Part No. Flexibar Support Holder

3 Pole 160/250A/400A 1 Set FCSH21164

Fault Current Maximum Spacing (Prospective) Centres* 50kA 500mm 63kA 280mm *For conditional short circuit applications only.

Description Size Qty Part No. Disc Washer DIN6796 Ø 10mm 1 Set DWA21000 Tap Off Set Ø 10mm 1 Set TOS21010 Tap Off Bracket 6 x M5 1 Set TOB21020 Busbar Nut M10 1 Set BBN21030

ELS21164

FLExIBAR SUPPORT HOLDER

BUSBAR TAP-OFF ACCESSORIES

Documents

11 - ENCLOSURES & SWITCHBOARD SYSTEMS - IPD ... GROUP LIMITED Phone: 1300 556 601 Product Catalogue v-15 359 ENCLOSURES & 11SWITCHBOARDS 11 - ENCLOSURES & SWITCHBOARD SYSTEMS Techno