1
www.stowellconcrete.co.uk Stowell dense concrete blocks offer the builder a full range of solid concrete blocks with a well- established durability, low drying shrinkage and proven acoustic properties that will fulfil most applications. They are manufactured to BS EN 771-3 using Class 1 limestone aggregates. The blocks are available in a standard face size of 440 % 215mm and in thicknesses of 75mm, 90mm, 100mm, 140mm and 190mm in a standard finish (suitable for rendering). Strengths available are 7.3 N/mm 2 , 10.4 N/mm 2 and 17 N/mm 2 . The above blocks are also manufactured in a close textured finish which is suitable for direct decoration (strengths available 7.3 N/mm 2 , 10.4 N/mm 2 ). Coursing bricks and slips are also available in both 100mm and 140mm thicknesses. SIZE mm approx approx weight kg density kg/m 3 440 % 215 % 75 14 1950 440 % 215 % 90 17 1950 440 % 215 % 100 18.5 1950 440 % 215 % 140 26 1950 440 % 215 % 190 35 1950 THERMAL CONDUCTIVITY: 1.00 W/mK THERMAL RESISTANCE Size mm m 2 K/W at: 440 % 215 % 75 3% m/c 0.08 440 % 215 % 90 3% m/c 0.09 440 % 215 % 100 3% m/c 0.10 440 % 215 % 140 3% m/c 0.14 440 % 215 % 190 3% m/c 0.19 (m/c = moisture content) Dense concrete blocks to BS EN 771-3 Blocks in excess of 20kg each. Please use with caution after assessing risks, or consider using Stowlite, Fibotherm, hollow, cellular or midi blocks. Outside resistance 0.040 100mm block+19mm render 0.136 50mm low emissivity cavity 0.644 50mm Kingspan Kooltherm K8 2.380 100mm dense concrete block 0.100 12.5mm drylining on Dabbs 0.230 Inside resistance 0.130 Sum of resistances 3.660 m 2 K/W Uncorrected U-value 0.273 W/m 2 K Correction 0.026 U-VALUE 0.299 W/m 2 K OPTION 1 PARTIAL FILL Outside resistance 0.040 105mm brick 0.136 100mm Dritherm 32 3.125 100mm dense concrete block 0.100 12.5mm drylining on Dabbs 0.230 Inside resistance 0.130 Sum of resistances 3.761 m 2 K/W Uncorrected U-value 0.266 W/m 2 K Correction 0.026 U-VALUE 0.292 W/m 2 K OPTION 2 FULL FILL 1.0 per tonne per Close Size mm 7.3N/mm 2 pack 7.3N 10.4N 17N texture 7.3N 440 % 215 % 75 72 56 440 % 215 % 90 60 48 440 % 215 % 100 54 44 440 % 215 % 140 38 32 440 % 215 % 190 28 20 Coursing bricks 65 % 215 % 100 340 128 65 % 215 % 140 240 96 Coursing slips 38 % 215 % 100 625 416 38 % 215 % 140 450 312 CONCRETE BLOCKS FLOOR JOISTS HOLLOWCORE FLOORING PRE-STRESSED LINTELS PAVING, KERBS & CHANNELS 07/09

1.0 Dense Concrete Blocks

Embed Size (px)

Citation preview

Page 1: 1.0 Dense Concrete Blocks

www.stowellconcrete.co.uk

Stowell dense concrete blocks offer the builder afull range of solid concrete blocks with a well-established durability, low drying shrinkage andproven acoustic properties that will fulfil mostapplications. They are manufactured to BS EN771-3 using Class 1 limestone aggregates.

The blocks are available in a standard face sizeof 440 % 215mm and in thicknesses of 75mm,90mm, 100mm, 140mm and 190mm in astandard finish (suitable for rendering).Strengths available are 7.3 N/mm2 , 10.4 N/mm2

and 17 N/mm2. The above blocks are alsomanufactured in a close textured finish which issuitable for direct decoration (strengths available7.3 N/mm2, 10.4 N/mm2).

Coursing bricks and slips are also available inboth 100mm and 140mm thicknesses.

SIZE mm approx approxweight kg density kg/m3

440 % 215 % 75 14 1950440 % 215 % 90 17 1950440 % 215 % 100 18.5 1950440 % 215 % 140 26 1950440 % 215 % 190 35 1950

THERMAL CONDUCTIVITY: 1.00 W/mK

THERMAL RESISTANCESize mm m2K/W at:440 % 215 % 75 3% m/c 0.08440 % 215 % 90 3% m/c 0.09440 % 215 % 100 3% m/c 0.10440 % 215 % 140 3% m/c 0.14440 % 215 % 190 3% m/c 0.19(m/c = moisture content)

Dense concrete blocks to BS EN 771-3

• Blocks in excess of 20kg each. Please use with caution after assessing risks, or considerusing Stowlite, Fibotherm, hollow, cellular or midi blocks.

Outside resistance 0.040100mm block+19mm render 0.13650mm low emissivity cavity 0.64450mm Kingspan Kooltherm K8 2.380100mm dense concrete block 0.10012.5mm drylining on Dabbs 0.230Inside resistance 0.130Sum of resistances 3.660 m2K/WUncorrected U-value 0.273 W/m2KCorrection 0.026U-VALUE 0.299 W/m2K

OPTION 1 PARTIAL FILL

Outside resistance 0.040105mm brick 0.136100mm Dritherm 32 3.125100mm dense concrete block 0.10012.5mm drylining on Dabbs 0.230Inside resistance 0.130Sum of resistances 3.761 m2K/WUncorrected U-value 0.266 W/m2KCorrection 0.026U-VALUE 0.292 W/m2K

OPTION 2 FULL FILL

1.0

per tonne per CloseSize mm 7.3N/mm2 pack 7.3N 10.4N 17N texture 7.3N

440 % 215 % 75 72 56

440 % 215 % 90 60 48

440 % 215 % 100 54 44

440 % 215 % 140 38 32

440 % 215 % 190 28 20

Coursing bricks65 % 215 % 100 340 128

65 % 215 % 140 240 96

Coursing slips38 % 215 % 100 625 416

38 % 215 % 140 450 312

CONCRETE BLOCKS FLOOR JOISTS HOLLOWCORE FLOORING PRE-STRESSED LINTELS PAVING, KERBS & CHANNELS

07/09