KISTNER GmbH & Co. KG www.maschinen-kistner.de info@maschinen-kistner.de

2 Universal tool milling and drilling machines

1 machine can be used as spare part carrier

Manufacture MAHO

Type MH 600 P

Year of manufacture 1983

Route and positioning control HEIDENHAIN – TNC 135

Machine number 62450

Travels longitudinal 500mm / cross 400mm / vertical 400mm

TECHNICAL DATA

working area

adjustment of the cross support

- X-axis 500mm

- Z-axis 400mm

- Y-axis 400mm

working room

working spindle

- tool holder SK 40

- sleeve travel of the horizontal and vertical-working spindle 80mm

- hydraulic tool clamping

speed and feed

- working spindle - drive 4,0 kW

- working spindle-speed 50-2.500 rpm

feed

- in axes X and Z 1 – 750 mm/min.

- in axis Y 1 – 500 mm/min.

rapid traverse

- in axes X and Z 1,2 m/min.

- in axis Y 0,8 m/min.

reduction of the feed- and rapid traverse rate

- in axes X, Y and Z 1 : 100

UNIVERSAL-INSTALLATED ROTARY TABLE

The universal-installated rotary table serves for taking heavily and largely tools in the case of complicated

spacial machinings, which requires a high geometrical precision.

The tabel is swiveling around it´s transverse and longitudinal axis in each case by ±30° and the table plate is

rotatable by 360° for the adjustment of the solid angle.

The table is equipped with a 4 x 90° measuring system for direct sharing and with a graduated collar for

indirect sharing.

The table plate is mechanically permanent clamped and for sharing hydraulically unfixed.

clamping surface Ø 720mm x 410mm

center hole 30 H7 x 20mm

number of T-slots 14 H7 8

distance of T-slots 45mm

swiveling around the table – transverse axis ± 30°

swiveling around the table – longitudinal axis ± 30°

rotatability of the table plate 360°

direct sharing

- angel step 90°

- number of angel steps 4

indirect sharing

- sharing of the graduated collar 2

max. table load

(weight of workpiece and tensioning mean) ca. 300 kg

weight ca. 240 kg