1 Expro is an oilfield service company which operates in over 50
countries with more than 5000 employees, providing equipment and
services to support exploration and development activities. We
provide services and products that measure, improve, control and
process flow from high-value oil and gas wells, from exploration
and appraisal through to mature field production optimization and
enhancement. With a specific focus on offshore, deepwater and other
technically challenging environments, we provide a range of mission
critical services across three key areas: Well Test & Appraisal
Services Subsea, Completion & Intervention Services Production
Services Expro Overview Slide 2 2 Expro has an established
operations base located in Paradise, NL and we have been actively
engaged in the local offshore industry since 1998. We currently
have over 30 local employees based out of Paradise to support our
current contractual commitments for clients such as Statoil, Husky
and Suncor. Services provided to the local industry include: well
testing, subsea landing strings, down-hole video, fluid sampling,
drill stem testing and tubing conveyed perforating, where
applicable, to support both exploration and development operations.
Expro Group Canada, Inc. Slide 3 3 Expro is seeking a site suitable
for the location of prefabricated perforating tool assembly and
storage facilities in conformance with Natural Resources Canada
(NRCan) regulations. The site requirement consists of an open,
level pad with road access in an area which has minimal or
restricted public traffic, residential development or surrounding
commercial activities within a buffer zone as defined and required
by NRCan. An access road and 15m x 50m gravel pad would be
constructed. The pad area would be secured by a fence for total
access control. The prefabricated and approved facilities would
consist of two portable units; an assembly facility 60 long x 16
wide, and a storage unit 30 long x 12 wide. The activities to be
conducted at the site would include the assembly, disassembly and
storage of perforating tools and the components required to
assemble them. All personnel associated with the activities would
be qualified and trained specifically for these operations with
appropriate competency and security clearance. These activities
would be conducted at an anticipated maximum frequency of once per
quarter for a week in duration. Traffic would be limited to weekly
surveillance site visits along with delivery of the components and
the eventual shipping of assembled perforating tools to the
offshore base in St. Johns. Our Requirements and Activities Slide 4
4 Expro, through our local facilities agent, is seeking a
commercial lease arrangement for the proposed site for the duration
of our current commitment, expiring on October 1, 2018. Two
optional one year extensions, at our clients discretion, may occur
and are dependent upon future drilling and development activity
plans. Expro would commit to an extended lease term if warranted
based on increased demand and a mutually beneficial agreement. Once
the site lease agreement has expired, Expro would then remediate
the site to a mutually agreed state which would potentially consist
of the gravel pad and access road. Materials required to construct
the access road and pad would be sourced locally, wherever possible
and competitively available. Qualified local residents would be
given full and fair consideration and encouraged to apply for
employment opportunities relevant to the planned activities.
Additional local infrastructure support opportunities would include
site maintenance, snow clearing, material transportation service
and temporary equipment rental. Benefits to the Community Slide 5 5
The proposed placement of the facilities at this site has been
approved by Natural Resources Canada (NRCAN) the federal authority
responsible for regulating these activities. Proposed Site Plan
Slide 6 6 The proposed placement of the facilities at this site has
been approved by Natural Resources Canada (NRCAN) the federal
authority responsible for regulating these activities. Proposed
Site Plan Slide 7 7 Pad Layout Slide 8 8 Expro has leased industry
leading facilities for this site. These facilities meet and exceed
the highest standards for perforating equipment storage and
security used in Canada. These same facilities are being used by
Expros competitors in Newfoundland. Placement of the facilities has
been approved by NRCan to meet or exceed the allowed distances to
outlying structures and facilities. The site will have controlled
access and be fenced around the perimeter of the pad. Only properly
trained and authorized (by NRCan & Expro) personnel will have
access to the facilities. The facilities will be under 24hr
surveillance utilizing a remote monitor and recording system which
will alert Expro in the event of unauthorized access. Expros
commitment to safety includes strict operating rules; properly
designed, constructed, and tested equipment; and well trained,
highly qualified personnel. Safety and Security Slide 9 9 The
Occupational Health and Safety Division of the Government of
Newfoundland & Labrador has reviewed and approved Expros Safety
Procedures, operating procedures, risk assessments, personnel
training requirements, etc. Expro is in compliance with NRCan
regulations, Transport of Dangerous Goods (TDG) and OH&S NL
requirements. In order to be in compliance with NRCan regulations
the following approvals are required: Authorization Importation
Manufacturing Personnel Screening In addition to compliance with
Federal and Provincial requirements regulating these activities,
Expro has developed their own internal processes, procedure and
directives which must be adhered to in the handling, storage,
assembly and transportation of these tools. In Canada, there are
currently 20 companies with 60 similar operations similar to what
we intend to set up licensed by Natural Resources Canada (NRCan).
Expro maintains five locations in the US with similar capabilities
which are licensed and regulated by the U.S. Department of Justice,
Bureau of Alcohol, Tobacco, Firearms and Explosives. In Compliance
with Federal and Provincial Agencies Slide 10 10 Expro - North
America Offshore Copyright Expro 2014 YearHoursFTLLTIRWDCMTCFAC
2012690,672015124 2013750,186004027 2014662,776000123
2015522,622011020 FTL = Fatalities LTI = Loss Time Injuries RWDC =
Restricted Work Day Cases MTC = Medical Treatment Cases FAC= First
Aid Cases Slide 11 11 Expro - East Coast Canada Copyright Expro
2014 YearHoursFTLLTIRWDCMTCFAC 201248,63400100 201345,06400100
201450,26900001 201560,23400002 FTL = Fatalities LTI = Loss Time
Injuries RWDC = Restricted Work Day Cases MTC = Medical Treatment
Cases FAC= First Aid Cases Slide 12 12 Expro has recently been
awarded a fully integrated well testing services contract to
support our clients exploration campaign offshore Newfoundland. The
project includes the use of a number of Expros services including:
Tubing Conveyed Perforating (TCP) Drill Stem Testing tools (DST)
Electro-Hydraulic (EH) 15k small bore subsea safety system Surface
well testing system Fluids sampling and onsite field analysis To
date, on the project over the past year we have had 21,368 exposure
hours offshore with a crew of 29 personnel resulting in one minor
first aid injury. Expro Activity Slide 13 13 Expro appreciates the
opportunity and looks forward to becoming a part of the Pouch Cove
business community. As a participant in the local offshore industry
we remain committed to utilizing local personnel, goods and
services first to ensure that the benefits of the activities we
engage in remain in the host communities. Additional information on
Expro can be accessed at our website at www.exprogroup.com
www.exprogroup.com Thank You
