1-5-3, Nihonbashi , Chuo-ku, Tokyo 103-0027, Japan Phone ... · ⑥ furukawa rock drill europe b.v. madrid branch ⑭ frd indonesia liaison office ⑦ FURUKAWA ROCK DRILL INDIA PRIVATE

Mining Machinery-E1502-F2Printed in Japan

1-5-3, Nihonbashi , Chuo-ku, Tokyo 103-0027, JapanPhone +81-3-3231-6982 Fax +81-3-3231-6994

ISO9001, ISO14001Takasaki, Yoshii Works

Certified Management System

FRD Furukawa reserves right to change specifications without prior notice.

Mining Machinery catalogue

FRD provides high value-added products and services on a global scale such that only a company that knows the land could provide. “Drilling," "crushing" and “breaking": Those machines are indispensable for opening up the earth. FRD supports the development of infrastructure both domestically and overseas with its machines. These include hydraulic crawler drills, hydraulic breakers, hydraulic crushers. Supplying these machines makes work more efficient and helps reduce manpower needs, and they also contribute to improved ease of operation and safety. These products and services are used in Japan and over one hundred countries around the world. They allow new challenges and the expansion of our stage.

FURUKAWA ROCK DRILL CO.,LTD.

（HEAD OFFICE）

① USA （Ohio）① USA （Ohio）

③ LATIN AMERICA （Panama）

④ EUROPE （Netherlands）④ EUROPE （Netherlands）▲ ⑤ Frankfurt▲ ⑤ Frankfurt

▲⑥ Madrid▲⑥ Madrid

⑦ INDIA （Bangalore）⑦ INDIA

（Bangalore）

⑧ SHANGHAI （China）⑧ SHANGHAI （China）

⑨ Beijing ▲⑨ Beijing ▲

⑩ Xi’an ▲⑩ Xi’an ▲

▲⑪ Guangzhou

▲⑪ Guangzhou

⑫ Chengdu ▲⑫ Chengdu ▲

⑬ KOREA （Hwaseong-Si）⑬ KOREA （Hwaseong-Si）

★ ⑮ South Africa （Johannesburg）

★ ⑮ South Africa （Johannesburg）

▲② South Carolina▲② South Carolina

★⑭ Indonesia （Jakarta）

★⑭ Indonesia （Jakarta）

① FURUKAWA ROCK DRILL USA ⑨ FRD（SHANGHAI）BEIJING OFFICE② FRD （USA） SOUTH CAROLINA BRANCH ⑩ FRD（SHANGHAI）CHENGDU OFFICE③ FURUKAWA ROCK DRILL LATIN AMERICA（PANAMA） ⑪ FRD（SHANGHAI）XI’AN OFFICE④ FURUKAWA ROCK DRILL EUROPE B.V. ⑫ FRD（SHANGHAI）GUANGZHOU OFFICE⑤ FURUKAWA ROCK DRILL ABBRUCHTECHNIK ⑬ FURUKAWA ROCK DRILL KOREA CO., LTD.⑥ FURUKAWA ROCK DRILL EUROPE B.V. MADRID BRANCH ⑭ FRD INDONESIA LIAISON OFFICE⑦ FURUKAWA ROCK DRILL INDIA PRIVATE LTD. ⑮ FRD SOUTH AFRICA LIAISON OFFICE⑧ FURUKAWA ROCK DRILL（SHANGHAI）CO., LTD.

1 2

For almost a century, As one of the world’s foremost drill and breaker specialist.FURUKAWA produces a full -range line-up capable of answering all types of job requirements.FURUKAWA means proven high performance.Every unit blends the best of a long proud tradition. Decades of specialized drill, breakers and related machinery manufacture combine with advanced engineering technology to give you top operating efficiency.This results from optimum po wer, reliability and productivity.

HD220 Hydraulic DrifterFURUKAWA Hydraulic Jumbo series is equipped with the high-performance HD220 hydraulic drifter. A new dual damper mechanism attains the extremely high drilling performance and prolongs the service life of drilling tools such as bits and rods. Experience how smooth and speedy drilling can be.

The improved efficiency and power of the impact mechanism and the newly developed dual damper mechanism significantly increase the impact energy transfer efficiency. The drilling speed is improved by 15% over our previous model. Thanks to the dual damper mechanism, the HD220 requires less thrust for rock drilling. For use on everything from extremely hard rocks to fissured soft rocks, the HD220 can drill holes with a minimum hole deviation and maximum hole smoothness.

Optimized impact piston shapeAt Furukawa, we have conducted model analysis for energy transfer efficiency (rock breaking efficiency) on tens of thousands different piston shapes to find the shape that performs the best over a wide range of rock types, from extremely hard rocks to fissured soft rocks.

Dual damper (shock absorber)The dual damper is a shock absorber with a unique mechanism. It is equipped with a damping piston to absorb the reaction force and a pushing piston to give the proper thrust force to rods and bits (patent has been obtained in the USA and is pending in Japan, the EU, and other countries). The dual damper firmly holds the bits on the rock and transfers the shock wave from the impact piston to the tips of the bits to break the rocks. This makes it possible to drill with appropriate thrust, reducing unnecessary movement of the hydraulic drifter, the possibility of idle blows, and the deviation in the drilled hole. It also significantly increases the service life of bits and rods.

Compact valveThe use of small, lightweight valve for the impact piston significantly improves the response of the piston and the efficiency of the impact output.

HD210S Hydraulic drifter HD90 Hydraulic drifter

Ｍｏｄｅｌ HD220 HD210S HD90Weight kg 187 170 130Overall length mm 1003 869 903Overall width mm 306 294 292Impact rate min-1 2,900 ～ 3,800 3,650 3,100 ～ 3,400Rotation speed （Max.） min-1 250 200 250Rotation torque （Max.） Nm 577 613 539Drill hole range mm φ45 ～ φ102 φ45 ～ φ64 φ38 ～ φ55Rod section R38 / T38 / R40 R38 / T38 （Female） R32 / R38Damping system Dual Dual －

Compact ValveDual Damper

Optimized Impact Piston shape

HD Series Hydraulic Drifter

■ Specifications

■ HD220 Hydraulic drifter

3 4


Boom & Guide Shell

■ JE333 Upright Mounting （Standard）

■ JE333 Offset Mounting （Option）

■ GH833-Ⅲ Straight Guide Shell for HD220 Drifter

■ GH833-Ⅲ-EXT Extension Guide Shell for HD220 Drifter

Model Length Feed length Rod length Back feed force Weightmm mm mm kN kg

GH833-Ⅲ-34-EXT 4,087-5,297 2,190-3,400 2,500-3,705 14.8 610

GH833-Ⅲ-40-EXT 4,087-5,897 2,190-4,000 2,500-4,310 14.8 625

Model Length Feed length Rod length Back feed force Weightmm mm mm kN kg

GH833-Ⅲ-34 5,305 3,400 3,705 14.8 505

GH833-Ⅲ-40 5,936 4,040 4,310 14.8 530

T1AM 1 Boom■ Drilling coverage

■ Outside dimension

Model T1AM Model T1AMDimension & Performance Engine & CarrierWeight 11.5 ton Type 4 cycle, 4cylinders, diesel engineHydraulic drifter HD220 Model QSB4.5 （EU/StageⅢA, EPA/Tire-3）Guide shell GH833-Ⅲ Manufacturer Cummins DieselBoom JE333 Jr. Rated output 119 kW / 2,500 min-１

Drilling coverage（width x height） 5,800 mm x 5,890 mm

Driving type 4 wheel driveBrake

Guide shell (feed length) for 3.4m for 4.0m Working brake Axle - in 4 wheel disc brakeOverall length 10,600 mm 10,970 mm Parking brake Mechanical brakeOverall width 1,700 mm Emergency brake Automatic working for engine stopsOverall height 2,100 mm SteeringTraveling speed 0～12 km/h Type Articulated chassis , power steeringGradeability 15° Steering angle ± 38ﾟMin. turning radius (outside) 4,920 mm OutriggerMin. turning radius (inside) 2,900 mm Type Hydraulic cylinder vertical holdGuide shell GH833 GH833-34-Ⅲ GH833-40-Ⅲ Electric equipmentLength 5,305 mm 5,936 mm Total required input 90 kVA overFeed length 3,400 mm 4,040 mm Electric motor for power pack 55 kWRod length 3,705 mm 4,310 mm Electric motor for air compressor 3.7 kWBoom JE333 Jr. Electric motor for booster pump 4.0 kWBoom length (Max / Min) 3,100 mm / 2,300 mm Voltage AC380/400/440V （50/50/60Hz）Boom lift angle + 60°～ - 30° Cable reel type Brush-ring methodGuide shell tilt angle + 30°～ - 60° Electric-cable length 100 mGuide shell dump angle + 90°～ - 0° Outside diameter φ38 mmBoom slide length 1,350 mm Delivery water capacity 130 lit/minGuide shell slide length 900 mmGuide shell swing angle Left 45°～ Right 45°Boom swing angle Left 35°～ Right 35°Guide shell rotary angle 360°Automatic parallel holding Standard

■ Specifications


Hydraulic Wheel Jumbo with HD220 Hydraulic Drifter

5 6

T2AM 2 Boom

Model T2AMPrincipal dimensionOperating mass 19,300 kgHydraulic drifter HD220 x 2 unitsDrilling coverage （width x height） 8,735 mm x 6,420 mmOverall length 11,680 mmOverall width 1,980 mmOverall height （Operator roof lowered） 2,195 mmTraveling speed （ Horizontal） 0 ～ 12.6 km/hTraveling speed （ 1:8 = 7°） 0 ～ 7.0 km/hGradeability 15°Min.turning radius （Outside） 6,075 mmMin.turning radius （Inside） 3,130 mmGH833-Ⅲ Guide shell （Straight） 3.4m feed length 4.0m feed lengthOverall length 5,305 mm 5,936 mmFeed length 3,400 mm 4,040 mmRod length 3,705 mm 4,310 mmJE333Mid Boom （Extension guide roll-over）Boom length （max.） 3,500 mmBoom length （min.） 2,400 mm Boom lift angle Up 60°～ down 30°Guide tilt angle Up 30°～ down 60°Extra swing angle 0 ～ 90°Boom slide length 1,100 mmGuide slide length 1,350 mmGuide swing angle Left 45°～ right 45°Boom swing angle （ L Boom ） Left 45°～ right 25°Boom swing angle （ R Boom ） Left 25°～ right 45°Guide rotary angle 360°Automatic parallel holding Standard

■ Specifications


Model T2AMEngine ＆ Power lineEngine type 4 cycle, 4 cylinders, diesel engineModel QSB4.5 （EU/StageⅢA, EPA/Tire-3）Manufacturer Cummins DieselRated output 119 kW / 2,500 min-１

Power transmission Hydro-Static Transmission （HST）Driving type 4 wheel driveBraking systemWorking brake Axle-in 4 wheel disc brakeParking brake Mechanical drum brakeEmergency brake Automatic working for engine stopsSteeringType Articulated chassis , power steeringSteering angle ±40°OutriggerType Hydraulic cylinder , vertical holdElectric & other equipmentRecommend capacity of electric source 170 kVA overElectric motor for power pack 2 x 55 kWElectric motor for air compressor 7.5 kWElectric motor for booster pump 5.5 kW

Electric power for drilling line AC380/400/440V （50/50/60Hz）

Cable reel Brush-ring methodCable capacity 100 mDelivery water capacity 240 lit/min at 73m


■ Drilling coverage

■ Specifications


Hydraulic Fan Cut Drill with HD709 Hydraulic drifter

FTH1AM-709■ Drilling coverage

■ Specifications

Model FTH1AM-709 Model FTH1AM-709Dimension & performance EngineWeight 13.8 ton Type Diesel engineHydraulic drifter HD709 Model Kubota V3307-DⅠ-TGuide shell 1 unit Displacement 3.331 LitersBoom 1 unit Rated output 55.4 kW / 2,400 min-１

Rod changer 1 unit Fuel tank capacity 90 liters

Drilling coverage 2,600 mm （Parallel Drilling） Transmission Hydro-Static Transmission （HST）

360°（Ring Drilling） Axle & WheelOverall length 7,750 mm Driving type 4 wheel driveOverall width 1,700 mm Front axle Frame fixedOverall height 2,200 mm Rear axle Center pivotTraveling speed 0～8.5 km/h Rear axle oscillating angle ± 7.5ﾟGradeability 15° Front and rear tires 8.25-20-SOLIDMin. turning radius（inside / outside） 2,900 mm / 5,300 mm

SteeringType Articulated chassis

Guide shell Steering angle ± 35ﾟLength 3,830 mm BrakeFeed length 2,180 mm Working brake Axle-in 4 wheel disc brakeRod length 1,830 mm Parking brake Mechanical brakeType of feed Hydraulic motor – chain rope feed OutriggerBoom Type Hydraulic cylinder vertical holdBoom lift angle + 90°～ - 10° Quantity 4Boom tilt angle + 0°～ - 10° Water supply (for flushing)Guide rotary angle 360° Water pressure 0.1 - 0.4 MPaGuide slide length 800 mm Water supply rate 160 l/minTop anchor slide length 1,000 mm Air supply (for flushing)Bottom anchor slide length 1,000 mm Air pressure 0.83 MPaParallel Drilling 2,000 mm （width） Air supply rate 3.7 m3/minRod change Electric equipmentRod quantity Cartridge 24（24+1） Total required input 110 kVA overRod length 1,830 mm x T38-MF Electric motor for power pack 55 kW x 1Compressor Voltage AC380/400/440V （50/50/60Hz）Delivery pressure 0.83 MPa Electric-cable length 80 mDelivery rate 3.7 m3/min Outside diameter φ38 mmElectric motor 22 kW

CJM1800M

Model CJM1800M Model CJM1800MDimension & performance EngineWeight 18 ton Type 4 cycle, 4cylinders, diesel engineOverall length 11,350 mm Model DD-4BG1TOverall width 2,000 mm Manufacturer ISUZUOverall height 2,450 mm Rated output 80.9 kW / 2,300 min-１

Traveling speed 0 ～ 20 km/h CarrierGradeability 15° Transmission Hydro-Static Transmission （HST）

Min. turning radius（inside / outside） 3,750 mm / 6,280 mm

Driving type 4 wheel driveFront axle Center-Pivot type

Effective Spraying（width x height） 7,800 mm x 5,200 mm

Rear axle Fixed frame typeRear axle oscillating angle ± 10ﾟ

Spraying Front and rear tires 12.00-20-18IR （OR）

Manipulator Remote or panel control BrakeConcrete pump Remote or panel control Working brake Axle-in 4 wheel disc brakePower source Electric motor Parking brake Spring type disk brakeConcrete pump SteeringModel CP1 Type Articulated chassis , power steeringConcrete feeding capacity Max. 18 m3/h Steering angle ± 40ﾟFeeding pressure Max. 8.0 MPa Electric equipmentWeight 1,500 kg Total required input 145 kVA overManipulator Voltage AC440V / 60HzModel Rotary type Hydraulic pack motor 45 kWControl system Panel control Compressor 55 kWNozzle oscillation Ellipse Cable reel type Brush-ring methodNozzle tilt angle 135° Electric-cable length 85 mNozzle swing angle 180°Nozzle slide length 2,000 mmBoom lift angle + 45°～ - 20°Boom swing angle Left 20°～ Right 60°

Concrete Sprayer

7 8



Model HD709 （ZA2652）Weight 215 kgOverall length 1.209 mmOverall width 352 mmHeight (from center) 168 mmImpact rate 2,250 ～ 2,500 min-1

Rotation torque 660 NmRod section R32Drilling hole range φ64 ～ φ89 mmDamping system Dual

■ Specifications of Hydraulic Drifter ■ Outside dimension

Hydraulic Wheel Jumbo with HD220 Hydraulic drifter

JTH2100A 2 Boom ＆ 1 Cage

9

Model JTH2100A Model JTH2100ADimension & performance Charging cage ZN700Weight 21 ton Boom length (Max / Min) 5,630 mm / 2,830 mmHydraulic drifter HD220 x 2 units Boom lift angle + 45°～ - 30°Guide shell GH833-Ⅱ x 2 units Boom swing angle Left 40°～ Right 40°Boom JE332-MARK4 x 2 units Boom slide length 2,800 mmCharging cage ZN710 x 1 units Cage tilt angle + 30°～ - 45°Drilling coverage（width x height） 9,600 mm x 6,600 mm

Max. loading capacity 250 kgAutomatic parallel holding Standard

Charging cage working coverage（width x height） 9,800 mm x 6,500 mm

Engine & CarrierType 4 cycle, 4cylinders, diesel engine

Guide shell (feed length) for 2.0m for 2.7m for 3.4m Model QSB4.5 （EU/StageⅢA, EPA/Tire-3）Overall length 10,910mm 11,220mm 11,220mm Manufacturer Cummins DieselOverall width 2,160 mm Rated output 119 kW / 2,500 min-１

Overall height 2,880 mm Driving type 4 wheel driveTraveling speed 0～8 km/h Transmission Hydro-Static Transmission （HST）

Gradeability 15° BrakeMin. turning radius（inside / outside） 4,000 mm / 8,000 mm

Working brake Axle - in 4 wheel disc brakeParking brake Mechanical brake

Guide shell GH833 GH833-20 GH833-27 GH833-34 SteeringLength 3,913mm 4,653mm 5,305mm Type Articulated chassis , power steeringFeed length 2,000mm 2,740mm 3,400mm Steering angle ± 30ﾟRod length 2,300mm 3,050mm 3,705mm OutriggerBoom JE332-Ⅳ Type Hydraulic cylinder vertical holdBoom length (Max / Min) 4,100 mm / 2,700 mm Electric equipmentBoom lift angle + 60°～ - 30° Total required input 170 kVA overGuide shell tilt angle + 30°～ - 60° Electric motor for power pack 55 kW x 2Guide shell dump angle + 90°～ - 0° Electric motor for air compressor 3.7 kWBoom slide length 1,400 mm Electric motor for booster pump 4.0 kWGuide shell slide length 1,350 mm Voltage AC380/400/440V （50/50/60Hz）Guide shell swing angle Left 45°～ Right 45° Cable reel type Brush-ring methodBoom swing angle

Boom L Left 45°～ Right 25° Electric-cable length 80 mBoom R Left 25°～ Right 45° Outside diameter φ45 mm

Guide shell rotary angle 360° Delivery water capacity 130 lit/minAutomatic parallel holding Standard

■ Drilling coverage

■ Specifications



10

Scaling JumboRock Scaling Jumbo is wheel mounted rock breaker equipped with Furukawa Hydraulic Breaker and intended for rock

scaling in mining and construction.

Rock Breaker is a stationery rock breaking equipment designed

for heavy work of breaking oversized rock on a grizzly in mine

and performs distinguished productivity, durability and safety, as

well as efficiency.

Stationery rock breakers are to be designed in compliance with

the specifications which customers required.

Hydraulic Boulder Breaking Machine

JTH1AM-HB 1 Boom Scaling Jumbos

Model JTH1AM-HBWeight 9.5 tonDrilling coverage

Height 15,240 mmWidth 12,050 mm

11 12

Shaft Jumbos Rock Drilling Tools

Model JSH3 Model JSH4Weight 9.5 ton Weight 19.5 tonTunnel diameter φ2,000 mm Tunnel diameter φ3,000 mmOverall length 9,320 mm Overall length 9,560 mmHydraulic drifter 3 units Hydraulic drifter 4 units

JSH3 3 Boom Shaft Jumbo JSH4 4 Boom Shaft Jumbo

Shaft Jumbos are designed for the excavation of a deep shaft in mining and construction, and perform efficient

excavation of shafts of small to large sized cross-sectional areas. Shaft Jumbos are to be designed in accordance

with shaft specifications on each project.

Rail Mounted Jumbo

Model JRH1-90Weight 8.0 tonHydraulic drifter 2 unitsRail gauge 762 mm / 914 mm

JRH1-90 2 Boom & 1 Cage

Highly durable tungsten carbide inserts are made from carefully

selected materials and are bases on chemical proofs and the

results of extensive experimentation.

A high quality steel body withstands long wear and severe

impact.

The design of the bits has been carefully studied theoretically

and experimentally and was finalized after extensive field

testing.

Top quality material is employed, proving high resistance to

wear fatigue and shock.

The steel is carefully heat-threated to prove a hardness that

resists accidental breakage. The forged steel is absolutely

straight, ensuring precision operation as well as long durability.

A thorough surface treatment provides the steel with further

improved fatigue and wear resistance.

Container Workshop

The compact container workshops can easily be

transported and installed to provide suitable field servicing

wherever a machine is used.

It enables all-weather servicing since its container is water-

proof, rust-proof and tough.

Stock with a wide range of equipment for filed servicing.

Equipment cab be fixed safely for transportation over

rough roads.

Tools can be arranged on the tool hanger board to suit

the kind of work.

Out side dimension and weight

Length : 6,058 mmWidth : 2,438 mmHeight : 2,591mmWeight : 5,140 kg

Pneumatic Tools

13 14

AIR AUGERAuger drills soft rocks and clayey rocks which cannot be

drilled easily with impact rotary drills.

AA1 （ Hand feed type ）

Model AA1Weight kg 8.8Overall length mm 266Output kW 2.1Revolution min-1 900Air consumption m3/min 2.6Inside diameter of hose mm 19Hose adapter thread R3/4Operation method Direct lever

Model 322D PD90LWeight kg 26.9 28.9Overall length mm 705 670Number of blows min-1 1,850 2,500Air consumption m3/min 3.5 4.5Shank size mm H22 x 108 H22 x 108Inside diameter of air hose mm 19 （R3/4） 25 （R3/4）Inside diameter of water hose mm 13 （R3/8） 13 （R3/8）Type of blow Wet WetLeg used LB56 LC77

LEG DRILLAir leg drills are designed mainly for use in horizontal drilling.

These medium-sized and large-sized drills for horizontal drilling are proven evaluated at

mines, tunnel construction, dam construction, etc.

Model 112D 217D 22DWeight kg 13.6 20.8 26.9Overall length mm 485 580 612Number of blows min-1 2,400 2,500 1,850Air consumption m3/min 2.1 2.4 3.5

Shank size mm H19 x 83H22 x 83 H22 x 108 H22 x 108

Inside diameter of hose mm 19 19 19 ～ 25Hose adapter thread R3/4 R3/4 R3/4Type of blow Air blow Air blow Air blow

HAND DRILLHand drills are designed mainly for vertical drilling.

Widely used for breaking rocks in quarries or for road constructions and other civil engineering work.

PAVING BREAKERA light-weight powerful pick hammer CA7 is suitable for drilling soft ground, breaking concrete, and ditching.

Paving breakers B-series are effective when used in heavier works such as simple road construction, ditching, and the

breaking up of strong concrete structures.

Model CA7 B30 B40 B60 B44 B90Weight kg 7.0 15.5 18.5 30.5 36.5 42.0Overall length mm 470 585 665 666 692 747Number of blows min-1 1,300 1,850 1,300 1,550 1,150 1,400Air consumption m3/min 1.2 1.0 1.4 1.4 2.0 2.2Shank size mm R26 x 80 H25 x 108 H25 x 108 H32 x 152 H32 x 152 H32 x 152Inside diameter of hose mm 19 13 19 19 19 19Hose adapter thread R3/4 R3/8 R3/4 R3/4 R3/4 R3/4

■ Specifications■ Specifications

■ Specifications ■ Specifications

CA7 B30 B40 B60 B44 B90112D 217D 22D

322D （without leg） PD90L （without leg）

Documents

1-5-3, Nihonbashi , Chuo-ku, Tokyo 103-0027, Japan Phone ... · ⑥ furukawa rock drill europe b.v. madrid branch ⑭ frd indonesia liaison office ⑦ FURUKAWA ROCK DRILL INDIA PRIVATE