08-2010SpecGuide

Specification GuideParts Directory

August 2010

For Store USe only. ProPerty oF:

Designer’s Choice®

Charlottesville Maple Hazelnut Glaze Square Charlottesville Cherry Java Square

SoM290529 rev. 08/02/2010

This Guide has been formatted to make designing with our cabinetry clear and easy. It contains complete and accurate information for our Designer’s Choice® products and an easy-to-read format to make quick “look-ups” a snap.

If you would like further clarification about any of our products or processes, please call your exclusive Home Depot Customer Service Representative at 800-677-8182.

Continuous ImprovementIn keeping with our policy of continuous product refinement, American Woodmark® reserves the right to change specifications in design and materials as conditions require.

Welcome

New ItemsThe color orange is used to highlight items which are newly available or modified for your American Woodmark designs. These items have been added/revised to make it easier to meet customer requests and your design requirements. All of these items are color coded orange for easy identification and include:

New/Expanded Finishes:• Cherry Java finish on all Cherry door styles• Maple Hazelnut Glaze on Charlottesville and Savannah

Improved/Redesigned SKUs:• Appliance Garages with Solid Wood Tambour Door:

AG2418, AG2718, AGS24• Corner Wall with Solid Wood Tambour Door:

CWT2448, CWTS2448, CWTS2448 WD• Kneehole Drawer Cabinets: KDC27/21, KDC33/27• Reduced Depth Drawer Program (Page 46)• Vanity Sink Bases: VSB54 BUTT, VSB5434H BUTT

Discontinued SKUs:• BLACK finish Fillers, Decorative Blocks, Posts, Legs and

Decorative Items• Bookcases: BC1848, BC2448, BC3048• Desk File Drawer Cabinets: DFD1821, DFD1824• File Base Drawer Kits: FBDK1821, FBDK1824• Glass Shelf Kits: GSK42, GSK45, GSK48• Kneehole Drawer Cabinets: KDC24/21, KDC30/27• Range Hoods: RH3024, RH3624, RH3024 CL, RH3624 CL• Range Hood Vents: VENT250, VENT250R• Tall Range Hoods:

RH3048 F, RH3648 F, RH3048 CLF, RH3648 CLF

• Base Pot and Pan Organizers with Full Access CushionClose Glides: Base Cabinets (B__CCBPPO), Kits (BPPOKCC__), Single Oven Cabinets (OVS__CCBPPO)

• Base Tray Divider Pull Out Cabinet: BTDP9• Bookshelves (Base): BSPLY2434__• Bookshelves (Tall): BSPLY__84, BSPLY__90, BSPLY__96• Bookshelves (Wall): BSPLY__48, BSPLY__60• Cove Corbels: CC29, C212• Cove Molding (Large Cove, Small Cove):

LCVM8, LCVM8 BLACK, SCVM8, SCVM8 BLACK• Deep Roll Out Trays with Full Access CushionClose Glides:

Base Cabinets (B__CC__T), Utility Cabinets (UT__CC4ROT), Vanity Linen Cabinets (VLC__CC4ROT), Kits (DROTCC__)

• Desk Base with Factory Installed Wastebasket(s): DWBT1821, DWBT1824• File Drawer Base Cabinets: FDB1821, FDB1824

• Glass Shelf Kits: GSK__-9, GSK__-6• Molded Plastic Cutlery Dividers:

Kits (MPCDK__), Factory Installed B(DB)__MPCD• Raised Panel Arched Valances: V__RP• Range Hoods: Tapered, Straight Valance, Arched

Valance (RH__ T, RH__ SV, RH__AV)• Range Hood Blowers: RHVENT__, RHVENT__R• Range Hood Chimneys: RHC__• Roll Out Tray Divider with Full Access CushionClose Glides:

Base Cabinets (B__CCROTD) and Kits (ROTDKCC__)• Storage Cubes: SC30, SC36, SC42• Vanity Base with Factory Installed Wastebasket:

VWBT18, VWBT1834H• Wall Filler Pull Outs: WFP330, WFP336, WFP342• Wastebasket Lids: WBL35G, WBL35W

Expanded SKU Offering:

American Woodmark Designer’s Choice Specification Guide

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Door Style Collections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Savannah® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Alexandria® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Charlottesville® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Richmond® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Townsend® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Annapolis® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Del Ray™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Gettysburg® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Newport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Portland® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Ashland™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Standard Cabinet Specifications . . . . . . . . . . . . . . . . . . . . .25 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Cabinet Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Finishing Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Wood Species & Materials . . . . . . . . . . . . . . . . . . . . . . . . .29 Wall Cabinet Construction . . . . . . . . . . . . . . . . . . . . . . . . .30 Base Cabinet Construction . . . . . . . . . . . . . . . . . . . . . . . . .31 Overlay Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Cabinet Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Construction Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Upcharges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 All Plywood Construction Option . . . . . . . . . . . . . . . . . . . .42 Plywood Veneered Sides Option. . . . . . . . . . . . . . . . . . . . .42 Construction Comparison . . . . . . . . . . . . . . . . . . . . . . . . . .43 Furniture Ends Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Inverted Frame Cabinet Option. . . . . . . . . . . . . . . . . . . . . .44 Premium Finish Cabinet Option . . . . . . . . . . . . . . . . . . . . .45 CushionClose® Glide Option . . . . . . . . . . . . . . . . . . . . . . . .45 Reduced Depth Cabinet Option . . . . . . . . . . . . . . . . . . . . .46 Increased Depth Cabinet Option. . . . . . . . . . . . . . . . . . . . .47 Void Door Cabinet Option . . . . . . . . . . . . . . . . . . . . . . . . .48 Cabinet Front Only Option . . . . . . . . . . . . . . . . . . . . . . . . .48 Matching Interior Cabinet Option . . . . . . . . . . . . . . . . . . . .49 Mullion Frame and Open Frame Door Options . . . . . . . . . .50

Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 With Spice Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Microwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 Wall End Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Blind Peninsula. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Wall Cabinets (continued) Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Specialty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 RangeHoods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Base With Deep Roll Out Trays . . . . . . . . . . . . . . . . . . . . . .93 Base With Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Base With Factory Installed Drawer Organizer . . . . . . . . .102 Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 Drawer Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 Drawer Base With Factory Installed Drawer Organizer . . .106 Sink/Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 Sink Base with Factory Installed Accessories . . . . . . . . . .111 Blind Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 Blind Peninsula Corner . . . . . . . . . . . . . . . . . . . . . . . . . . .116 Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 Specialty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

Desk and Office Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . .131 Desk Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 Specialty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 Bookshelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

Tall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

Vanity Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Standard Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 Base Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Specialty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 Vanity Linen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

Panels, Fillers & Moldings . . . . . . . . . . . . . . . . . . . . . . . . .169 Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 Decorative Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Moldings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182 Toe Kicks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 Posts, Legs & Decorative Items. . . . . . . . . . . . . . . . . . . . .191 Installation Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

Decorative Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

Parts Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

Contents3

Consumer Lifetime Limited WarrantyDesigner’s Choice® Lifetime Limited WarrantyAmerican Woodmark® hereby warrants to the original purchaser, for residential applications only, that all Designer’s Choice cabinets and accessories are free from defects in materials and workmanship. This warranty runs for as long as you own your home and begins upon the date of delivery to you. This warranty is expressly limited to repair or replacement of the defective part at the discretion of American Woodmark, and does not include labor for removal or replacement. This warranty does not extend to defects caused by improper handling, storage, installation, assembly or disassembly, intentional damage, product modifications, exposure to the elements including humidity which may result in warping or splitting, accidental misuse, abuse or negligence.

Natural woods may vary in texture, color and wood grain, and exhibit subtle changes as they age. For example, wood joints may eventually have visible cracking around the joint area and cabinet colors may darken or lighten over time. Sunlight, smoke, moisture, household cleaners and other environmental conditions may cause materials to vary from their original color and/or to warp, split or crack. These variations are considered to be the nature of the material in relation to their environmental exposure and are not covered under this warranty.

Additional Limitations and DisclaimersAMERICAN WOODMARK MAKES NO OTHER WARRANTIES OTHER THAN THOSE SET FORTH HEREIN AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE LENGTH OF THE LIMITED WARRANTY PERIOD. THE LIMITED WARRANTIES SET FORTH HEREIN ARE LIMITED TO THE FIRST AND ORIGINAL BUYER AND ARE NOT TRANSFERABLE THEREAFTER. IN NO EVENT SHALL AMERICAN WOODMARK BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO THE PURCHASER OR TO ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING FROM PERSONAL INJURY, LOST PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF PROPERTY, ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER FROM NEGLIGENCE, WARRANTY, STRICT LIABILITY OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

ClaimsAll claims for defective cabinets and accessories must be submitted to American Woodmark in writing and must specify the defects present in the cabinets and accessories. After American Woodmark has had an opportunity to inspect the cabinets and accessories, they will, at their discretion, either replace defective cabinets and accessories or repair any defects in the cabinets and accessories. All claims must be submitted to the following address: American Woodmark Claims Department, Post Office Box 1980, Winchester, Virginia 22604.

44

DO

OR

STyL

ES

5

Door Style Collections

Door Cross Section

Drawer Cross Section5 Piece Drawer Front

TownsendCollection DelRayCollectionDoor Cross Section


GettysburgCollectionDoor Cross Section

Drawer Cross SectionDrawer Front

AnnapolisCollection

Door Cross Section


AshlandCollectionDoor Cross Section


NewportCollectionDoor Cross Section


PortlandCollection

Door Cross Section

Drawer Cross Section1" Detailed Drawer Front

AlexandriaCollectionDoor Cross Section


CharlottesvilleCollectionDoor Cross Section


RichmondCollectionSavannahCollectionDoor Cross Section

Large Drawer Cross Section

Small Drawer Cross Section5 Piece Small Drawer Front

5 Piece Large Drawer Front

6D

OO

R ST

yLES

DOOR STyLES: Savannah Collection

Savannah Collection

A unique collection with mitered doors, the Savannah Collection uses fine joinery and angled cuts on each corner so that no end grain shows. This full overlay, raised panel style is available in elegant Cherry or Maple for those with discriminating tastes.

• Savannah doors have 3” wide stiles and rails. Due to the increased width, this door style requires Partial Overlay (POL) Decorative Glass Inserts.

Door Cross Section

Large Drawer Cross Section

Small Drawer Cross Section5 Piece Small Drawer Front

5 Piece Large Drawer Front

SAVANNAH COLLECTIONSpecies: Maple & Cherry

Door Panel: Solid Raised Panel

Door Rail & Stile Width: 3”

Wall Door Style: Square

Overlay: Full Overlay Door (FOL)

Drawer System: Full Access Hidden Glides®

Hardware: Requires Decorative Hardware (see page 201 for restrictions)

SPECIES & FINISHESMaple Cherry

Auburn Glaze* 35MRE

Bordeaux 35CBS

Butterscotch Glaze* 35MGA

Chocolate Glaze* 35CSC

Coffee Glaze* 35MHD

Cognac 35MRS

Cream Glaze* 35MGL

HazelnutGlaze* 35MGZHoney 35MHS

Java 35CKSLinen* 35MPS

Mocha Glaze* 35MSC

Natural 35MNS

Spice 35MSS 35CSS

*Premium Finish (refer to page 45 for details)


DO

OR

STyL

ES

7DOOR STyLES: Alexandria Collection

Alexandria Collection

Classic, timeless and beautiful – the Alexandria Collection is all this and more. The elegant, raised panel doors, offered in Cherry, Hickory, Maple, or Oak adapt to nearly any setting from colonial to contemporary. A choice of square or cathedral styles, paired with a distinctive 1” detailed drawer front, add to Alexandria’s flexibility and appeal.

ALEXANDRIA COLLECTIONSpecies: Maple, Oak, Cherry, Hickory


Door Rail & Stile Width: 2 1⁄4”

Wall Door Style: Cathedral & Square


Drawer System: Full Access Hidden Glides


SPECIES, STyLES & FINISHESMaple Oak Cherry Hickory

Cathedral Square Cathedral Square Cathedral Square Cathedral Square

Auburn Glaze* 31MRE 32MRE

Bordeaux 31CBS 32CBS

Chocolate Glaze* 31CSC 32CSC

Coffee Glaze* 31MHD 32MHD

Cognac 31MRS 32MRS

Honey 31MHS 32MHS 31OHS 32OHS

Java 31CKS 32CKSMocha Glaze* 31MSC 32MSC

Natural 31MNS 32MNS 31ONS 32ONS 31HNS 32HNS

Spice 31MSS 32MSS 31CSS 32CSS 31HSS 32HSS

Tawny 31OTS 32OTS


Door Cross Section

Drawer Cross Section1" Detailed Drawer Front

8D

OO

R ST

yLES

DOOR STyLES: Charlottesville Collection

Charlottesville Collection

Adaptability, elegance and terrific value are key features of the Charlottesville Collection. The full overlay doors are available in a complete range of woods and finishes, including our exclusive Cherry Chocolate glaze, Maple Auburn, Butterscotch, Coffee, Cream, Hazelnut and Mocha glazes and Maple Linen finish.

CHARLOTTESVILLE CHERRy & HICKORySpecies: Cherry & Hickory






Hardware: Requires Decorative Hardware

SPECIES, STyLES & FINISHESCherry Hickory

Cathedral Square Cathedral Square

Bordeaux C6B K6B

Chocolate Glaze* C6C K6C

Java C6K K6KNatural C9N K9N

Spice C6S K6S C9S K9S


Door Cross Section



DO

OR

STyL

ES

9DOOR STyLES: Charlottesville Collection

CHARLOTTESVILLE MAPLESpecies: Maple







STyLES & FINISHESMaple

Cathedral Square

Auburn Glaze* M5E D5E

Butterscotch Glaze* M5A D5A

Coffee Glaze* M5D D5D

Cognac M5R D5R

Cream Glaze* M5L D5L

HazelnutGlaze* M5Z D5ZHoney M5H D5H

Linen* M5P D5P

Mocha Glaze* M5C D5C

Natural M5N D5N

Spice M5S D5S


Door Cross Section


10D

OO

R ST

yLES

DOOR STyLES: Charlottesville Collection

CHARLOTTESVILLE OAKSpecies: Oak







STyLES & FINISHESOak

Cathedral Square

Honey U1H V1H

Natural U1N V1N

Tawny U1T V1T

Door Cross Section



DO

OR

STyL

ES

11DOOR STyLES: Charlottesville Collection

CHARLOTTESVILLE WHITE THERMO FOILSpecies: White Thermo Foil

Door Panel: White Thermo Foil Raised Panel






STyLES & FINISHWhite

Cathedral Square

Thermo Foil R5W J5W

Door Cross Section


12D

OO

R ST

yLES

Richmond Collection

With its sculpted molding detail and raised panel styling, the Richmond Collection exudes elegant formality.

RICHMOND COLLECTIONSpecies: Maple & Cherry

Door Panel: Solid Raised Panel with Applied Molding







Auburn Glaze* 23MRE

Bordeaux 23CBS


Coffee Glaze* 23MHD

Cognac 23MRS

Honey 23MHS

Java 23CKSMocha Glaze* 23MSC

Natural 23MNS

Spice 23MSS 23CSS


Door Cross Section


DOOR STyLES: Richmond Collection


DO

OR

STyL

ES

13

Townsend Collection

The beauty and luster of true hardwood cabinetry emerge in the clean, simple lines of the Townsend Collection. Full overlay doors feature solid hardwood center panels of Cherry, Maple or Oak with finishes to complement a wide range of styles from Shaker to contemporary.

TOWNSEND COLLECTIONSpecies: Maple, Oak, Cherry

Door Panel: Solid Recessed Shaker Panel






SPECIES & FINISHESMaple Oak Cherry

Auburn Glaze* 25MRE

Bordeaux 25CBS


Coffee Glaze* 25MHD

Cognac 25MRS

Honey 25MHS 25OHS


Natural 25MNS 25ONS

Spice 25MSS 25CSS

Tawny 25OTS


Door Cross Section


DOOR STyLES: Townsend Collection

14D

OO

R ST

yLES

Annapolis Collection

A traditional, handcrafted look defines the Annapolis Collection – another Home Depot exclusive. Solid wood, recessed V-Groove panels of Maple and Hickory can be dressed up or down to match your setting with a variety of finishes, or choose classic White Thermo Foil.

ANNAPOLIS MAPLE & HICKORySpecies: Maple & Hickory

Door Panel: Solid Recessed V-Groove Panel






SPECIES & FINISHESMaple Hickory

Auburn Glaze* 26MRE

Coffee Glaze* 26MHD

Cognac 26MRS

Honey 26MHS

Mocha Glaze* 26MSC

Natural 26MNS 26HNS

Spice 26MSS 26HSS


Door Cross Section


DOOR STyLES: Annapolis Collection


DO

OR

STyL

ES

15

ANNAPOLIS WHITE THERMO FOILSpecies: White Thermo Foil

Door Panel: White Thermo Foil V-Groove Panel






FINISHWhite

Thermo Foil 26MWS

Door Cross Section


DOOR STyLES: Annapolis Collection

16D

OO

R ST

yLES

Del Ray Collection

Inspired by Mission style furniture, this unique style is perfect for today’s popular décor. A full overlay style with extra-wide framing and cascading top and bottom rails envelop a veneer flat panel for a distinctive and versatile choice in luxurious Cherry, Maple or White Thermo Foil.

• Del Ray doors have 3” wide stiles and rails. Due to the increased width, this door style requires Partial Overlay (POL) Decorative Glass Inserts.

DEL RAy MAPLE & CHERRySpecies: Maple & Cherry

Door Panel: Veneer Flat Panel







Auburn Glaze* 38MRE

Bordeaux 38CBS


Coffee Glaze* 38MHD

Cognac 38MRS

Honey 38MHS


Natural 38MNS

Spice 38MSS 38CSS


Door Cross Section


DOOR STyLES: Del Ray Collection


DO

OR

STyL

ES

17

DEL RAy WHITE THERMO FOILSpecies: White Thermo Foil

Door Panel: White Thermo Foil Flat Panel






FINISHWhite

Thermo Foil 38MWS

Door Cross Section


DOOR STyLES: Del Ray Collection

18D

OO

R ST

yLES

Gettysburg Collection

Our interpretation of the perennially popular Shaker style combines hardwood doors with exceptionally stable hardwood veneer center panels. The result? The Gettysburg Collection, an elegantly casual look that is also a great value.

GETTySBURG MAPLE & HICKORySpecies: Maple, Hickory

Door Panel: Veneer Flat Shaker Panel






Center Stiles: Included in 13” or wider doors

SPECIES & FINISHESMaple Hickory

Auburn Glaze* V5EDF

Coffee Glaze* V5DDF

Cognac V5RDF

Honey V5HDF

Mocha Glaze* V5CDF

Natural V5NDF V9NDF

Spice V5SDF V9SDF


Door Cross Section


DOOR STyLES: Gettysburg Collection


DO

OR

STyL

ES

19

GETTySBURG WHITE THERMO FOILSpecies: White Thermo Foil

Door Panel: White Thermo Foil Shaker Panel






Center Stiles: Included in 13” or wider doors

FINISHWhite

Thermo Foil V5WDF

Door Cross Section

Drawer Cross SectionDecorative Drawer Front

DOOR STyLES: Gettysburg Collection

20D

OO

R ST

yLES

Newport Collection

The Newport Collection’s graceful, solid wood raised panel doors are available in a full range of woods and finishes. Add a choice of square or cathedral cuts, and you have 34 ways to customize. All of which have made Newport one of the top-selling door styles at The Home Depot.

DOOR STyLES: Newport Collection

NEWPORT MAPLE, OAK, CHERRy & HICKORySpecies: Maple, Oak, Cherry, Hickory




Overlay: Partial Overlay Door (POL)



SPECIES, STyLES & FINISHESMaple Oak Cherry Hickory

Cathedral Square Cathedral Square Cathedral Square Cathedral Square

Auburn Glaze* M3E D3E

Bordeaux M6B D6B

Chocolate Glaze* M6C D6C

Coffee Glaze* M3D D3D

Cognac M3R D3R

Honey M3H D3H M1H D1H

Java M6K D6KMocha Glaze* M3C D3C

Natural M3N D3N M1N D1N M9N D9N

Spice M3S D3S M6S D6S M9S D9S

Tawny M1T D1T


Door Cross Section



DO

OR

STyL

ES

21DOOR STyLES: Newport Collection

NEWPORT WHITE THERMO FOILSpecies: White Thermo Foil

Door Panel: White Thermo Foil Raised Panel






STyLES & FINISHWhite

Cathedral Square

Thermo Foil M5W D5W

Door Cross Section


22D

OO

R ST

yLES

DOOR STyLES: Portland Collection

Portland Collection

The Portland Collection’s Maple or Oak veneers feature a unique “waterfall” edge treatment that brings to mind handcrafted furniture from an earlier time. Fine detailing and precise joinery tie it all together – at a terrific value.

PORTLAND COLLECTIONSpecies: Maple & Oak

Door Panel: Veneer Raised Panel





Hardware: Decorative Hardware Strongly Recommended

SPECIES, STyLES & FINISHESMaple Oak

Cathedral Square Cathedral Square

Auburn Glaze* T3E N3E

Coffee Glaze* T3D N3D

Cognac T3R N3R

Honey T3H N3H T1H N1H

Mocha Glaze* T3C N3C

Natural T3N N3N T1N N1N

Spice T3S N3S

Tawny T1T N1T


Door Cross Section



DO

OR

STyL

ES

23DOOR STyLES: Ashland Collection

Ashland Collection

The Ashland Collection’s recessed veneered panels are an economical way to bring the beauty of American Woodmark’s hardwood finishes to your home, without sacrificing our great range of options, modifications and accessories that give you complete design flexibility.

ASHLAND COLLECTIONSpecies: Maple, Oak, Cherry

Door Panel: Veneer Flat Panel





Hardware: Decorative Hardware Strongly Recommended

SPECIES, STyLES & FINISHESMaple Oak Cherry

Cathedral Square Cathedral Square Cathedral Square

Auburn Glaze* E3E Y3E

Bordeaux E6B Y6B

Chocolate Glaze* E6C Y6C

Coffee Glaze* E3D Y3D

Cognac E3R Y3R

Honey E3H Y3H E1H Y1H

Java E6K Y6KMocha Glaze* E3C Y3C

Natural E3N Y3N E1N Y1N

Spice E3S Y3S E6S Y6S

Tawny E1T Y1T


Door Cross Section


24D

OO

R ST

yLES

DOOR STyLES: Notes

Standard Cabinet Specifications

STAN

DAR

D C

ABIN

ET S

PECS

25

STANDARD CABINET SPECIFICATIONS: Certification

KCMA CertifiedAll cabinetry manufactured by American Woodmark is certified by the Kitchen Cabinet Manufacturing Association (KCMA).

KCMA sets the American National Standards Institute/KCMA 161.1- 2000 uniform performance and construction standards for kitchen and vanity cabinets. The program is referenced by U.S. Government Agencies, architects, builders, remodelers, and other specifiers.

Cabinets that bear the KCMA seal of certification are recognized as a quality product with the ability to perform after a rigorous battery of tests, simulating years of typical household use. Tests are performed by approved third-party independent laboratories.

American Woodmark is proud to display the KCMA seal of certification for cabinet construction.

Environmentally Responsible StewardshipAs a leading U.S. manufacturer of fine cabinetry, American Woodmark is committed to conducting business in a manner that both protects the environment and safeguards public health and safety. To achieve this end, the company has implemented a Corporate Environmentally Responsible Stewardship Program that proactively identifies potential environmental risks and monitors compliance with appropriate federal, state, local and internal standards.

American Woodmark has received certification by the Kitchen Cabinet Manufacturers Association (KCMA) Environmental Stewardship Program on all products. The certification was awarded based on compliance across a broad range of activity including air quality, product resource management, process resource management, environmental stewardship and community relations.

American Woodmark works with all suppliers to encourage sustainable forestry practices. Wood doors, drawer fronts and cabinet front frames are made from North American-grown hardwoods. Particle board and plywood are purchased from suppliers that meet the Composite Panel Association requirements for Environmentally Preferable Products including formaldehyde emissions that comply with ANSI Standards.

American Woodmark uses leading edge technologies to limit both hazardous and non-hazardous emissions, byproducts and waste. On-going, formal programs identify opportunities for recycling and reusing materials. When waste ultimately requires disposal, steps are taken to minimize the environmental impact.

The American Woodmark Foundation supports local programs serving the community, including activities focused on maintaining the quality of life.

American Woodmark is dedicated to doing our part in the preservation and sustainability of the environment.

26ST

AND

ARD

CAB

INET

SPE

CS


STAN

DAR

D C

ABIN

ET S

PECS

27STANDARD CABINET SPECIFICATIONS: Cabinet Specifications

Door ConstructionWood doors consist of door frames constructed from kiln-dried 3⁄4” solid hardwood with mortise and tenon joints and floating center panels constructed of veneered or solid wood. White Thermo Foil door styles are covered with Thermo Foil on the door front and a white melamine panel on the door back. Thermo Foil is produced when a PVC molded plastic is bonded to a pre-machined 3⁄4” thick medium density fiberboard (MDF) core using heat and pressure.

Cabinet Front Face FramesCabinet front face frames are made from 3⁄4” x 1 5⁄8” solid hardwood. They are kiln-dried to prevent warping. Face frame joints are pressure fitted, glued, double doweled and stapled.

Cabinet Side PanelsCabinet side panels are 1⁄2” thick and made of engineered wood with our rigorous multi-step TuffTech® UV-cured finish. They are captured into a grooved front face frame and secured using high-strength fasteners and glue.

Cabinet Tops, Bottoms and FloorsTops, bottoms and floors are 1⁄2” thick and made from engineered wood. They are finished with our TuffTech finishing system. They are fitted and glued into the cabinet front face frame grooves, then captured in the grooves of the cabinet side panels.

Cabinet BackThe cabinet back is made from 1⁄8” thick hardboard substrate. The inside cabinet surface is finished with our TuffTech finishing system.

Hanging RailsThe base and vanity top hanging rail is 3⁄4” thick solid wood, mortise and tenon joined and glued to the cabinet side panels. The wall cabinet hanging rails are 1⁄2” thick engineered wood, glued and pinned into the cabinet back, cabinet side panels and top/bottom.

Cabinet ShelvesCabinet shelves are 3⁄4” thick engineered wood with our TuffTech finishing system. Shelves are banded on one side with PVC edge banding. All shelves are adjustable and meet KCMA load standards of 15 pounds per square foot.

Drawer Systems–Base and 24” deep Desk Base and 24” deep Desk cabinets utilize natural finish dovetailhardwood drawers with plywood bottoms and Full AccessHidden Glides.

Drawer Systems–Vanity, 21” deep Desk and Deep Roll Out TraysAll Vanity cabinets, 21” deep Desk cabinets and Deep Roll Out Trays utilize natural finish dovetail hardwood drawers with printed MDF bottoms and side-mounted drawer glides, which are 3⁄4 access. All drawers meet KCMA load standards of 15 pounds per square foot.

Corner BlocksCorner blocks are attached to help ensure cabinet squareness and allow for proper countertop installation.

HingesFully concealed, self-closing Hidden Hinges® are standard on all door styles.

Inset Toe KickInset toe kicks are constructed of 1⁄2” thick unfinished engineered wood and are recessed 3 1⁄2”.

BTK8 (matching toe kick) required for installation.

Continuous ImprovementIn keeping with our policy of continuous product refinement, American Woodmark reserves the right to change specifications in design and materials as conditions require.

28 STANDARD CABINET SPECIFICATIONS: Finishing SystemsST

AND

ARD

CAB

INET

SPE

CS

Finishing SystemsThe finishing systems used on our products are designed to ensure the beauty and durability of our cabinetry. State-of-the-art equipment allows precise sanding, filling and finish coverage of each of our products.

BeautyGuard® Finishing SystemBeautyGuard is an extremely sophisticated and environmentally responsible coating that offers durability, ease of cleaning and water resistance. We use a combination of mechanical systems to bring out the richness, luster and natural grain definition of the wood, as well as computerized automation to ensure color consistency and surface smoothness. Our BeautyGuard Finishing System is a rigorous multi-step process that includes sanding, brushing, cleaning, stain application, computerized oven drying and a catalyzed topcoat to protect and beautify cabinets for years to come.

TuffTech Finishing SystemOur TuffTech Finishing System uses only 100% solids. This multi-step panel finishing system begins with three sanding operations followed by a top and bottom brush cleaning to provide a smooth surface for material adhesion. Next, an ultraviolet (UV) filler is cured using light ovens to seal the board completely. Once again the board is sanded and a waterborne adhesion material is applied and dried to provide an interlocking bond with the water-based paints. Depending on the product, two or three coats of paint are applied, dried and then covered with an ultraviolet topcoat. This topcoat is made of acrylics and urethane and acts as a sealant to protect the paint.

Environmentally Responsible FinishingOur panel finishing system uses only water-based paints and fillers, yielding neither hazardous waste nor water contamination. Our acrylic and urethane materials are 100% solids, dried using high intensity lights, yielding no atmospheric emissions. Our products are extremely resistant to stains and surface damage that can be caused by common household chemicals. Our products exceed KCMA and ANSI standards for resistance to stains like coffee, grape juice and moisture.

Cabinet CareRemove dust from cabinets frequently with a soft lint-free cloth. The cloth may be slightly dampened with water or a spray type dust remover. Wood and laminate cabinet surfaces may be polished once every few months with a high quality, non-oil based furniture polish. Do not use a paste wax type material. Wax build-up is difficult to remove and will leave a residue that attracts dust and moisture. Polishes containing silicon should not be used. Clean spills immediately. Use a clean cloth and mild soap if necessary. Wipe dry with a clean soft cloth. Do not use detergents, citrus or ammonia based cleaners, steel wool, soap pads or abrasive cleaners on cabinets.

Extra care should be taken that cabinet finishes are not exposed to heat in excess of 200° Fahrenheit (174° for white Thermo Foil finishes). Do not place or mount small appliances beneath wall cabinets. These appliances (such as coffee makers and toasters) can produce excessive heat, which can damage the finish of cabinets. Do not expose doors or drawer fronts (especially white Thermo Foil) to heat created from self-cleaning ovens or ranges. The HSK (Heat Shield Kit) should be used when cabinets are installed or mounted directly next to ovens or ranges.

Allow Cabinets To Age BeautifullyOur cabinets represent the careful selection of woods and white Thermo Foil finishes. While every effort is made to match wood grain as closely as possible, no two pieces of wood are exactly alike, even from the same tree. These differences in natural color and grain mean that each piece will respond differently to the finishing materials used. For example, close-grained woods absorb less and will vary in color from more open-grained pieces from the very same tree. It’s these variations that contribute to the beauty and distinction of quality wood products. However, exposure to sunlight, smoke and chemicals may cause some materials to fade or vary from their original color over time.

This is why cabinets, doors, drawer fronts and accessories added at a later date may not exactly match cabinets installed now. For the same reasons, door samples or displays may not represent the exact color of cabinets received at the time of shipment. Consumers should also read all cleaning agent instructions carefully before application.

Due to changes that occur from natural and environmental factors a cabinet is exposed to over its lifetime, we cannot be responsible for variations that occur in the finish of wood or white Thermo Foil cabinets as they age.


STAN

DAR

D C

ABIN

ET S

PECS

29STANDARD CABINET SPECIFICATIONS: Wood Species & Materials

Wood Species & Materials

CherryCherry is a close-grained, multicolored hardwood with occasional pin knots and fine grain variations appearing as curls and waves. Features described below are typical and not considered defects:• Small sap pockets, pin knots and streaks• Color ranges from pale yellow sapwood to deep reddish brown

heartwood, with occasional shades of white, green, pink or even grey

• Staining reveals subtle variations and colors that typically darken over time

• Variations within a single door• May accept nicks and bumps over time

HickoryHickory is a very tough, dense hardwood making it an extremely durable cabinet material. Unlike other hardwoods, wood selection for hickory does not attempt to minimize discrepancies in wood color tones. Darker stains will moderate the color variance. Features described below are typical and not considered defects:• Dramatic color variations ranging from deep reddish brown

heartwood to pale white sapwood• Random burls, mineral streaks, knots and pecks• Doors and parts of doors that range in color from light to deep

brown when finished

MapleMaple is an exceptionally hard, finely grained wood species with a fine, even texture. Darker stains will moderate the color variance; lighter stains mellow with golden hues over time. Features described below are typical and not considered defects:• Creamy white to light blonde tones to dark reddish brown tones• Small mineral streaks of light blonde or reddish brown that

darken with stain• Wavy, curly bird’s-eye or burl graining as well as worm

tracking across the grain that will darken when stained• Variations within a single door

OakOak is a prominently grained hardwood with pattern variations from straight grain to arcs. It is durable and forgiving of nicks and bumps, and mellows with golden hues over time. Darker stains provide a more uniform appearance. Features described below are typical and not considered defects:• Natural oak colors range from light tans to deep reddish browns• Streaks of yellow or black mineral deposits• Noticeable differences in color between open and close-grained

areas which may be more evident with light colored stain• Variations within a single door

White Thermo FoilThermo Foil finishes allow white Thermo Foil cabinet doors to exhibit the same styling and detail found in solid wood doors.• The Thermo Foil finish found on the front of white Thermo

Foil cabinet doors is produced when a PVC molded plastic is bonded to a pre-machined core material using heat and pressure

• White Thermo Foil finishes are extremely durable, easy to clean and especially resistant to chipping and cracking

• The core is medium density fiberboard (MDF) with a white melamine back

American Woodmark incorporates solid hardwoods and hardwood veneers. These are natural materials with inherent variations. As such, our quality standards establish tolerance ranges for matching the hardwood pieces. Consumers should review actual samples of hardwoods in our selling centers and cabinet displays to help establish realistic expectations of variations involving wood grain, color tones, presence of knots and so forth.

These variations are at the heart of the unique natural beauty of finished hardwood. In addition, exposure of wood products to sunlight, some chemical agents and smoke can cause wood colors to change over time.

Designer’s Choice wall cabinets are constructed using high quality materials and hardware.

The drawing below illustrates and identifies the parts of a standard Designer’s Choice wall cabinet.

NOTE: Single square door cabinets are hinged left and can be reversed in the field. Single cathedral door cabinets must be ordered hinged left or right.

STANDARD CABINET SPECIFICATIONS: Wall Cabinet ConstructionST

AND

ARD

CAB

INET

SPE

CS30


*Shelf depth will be 12” or 24” deep depending on cabinet. Review specifications for clarification.

NOTE: Base single door cabinets are hinged left and can be reversed in the field.

Designer’s Choice base cabinets are constructed using high quality materials and hardware.

The drawing below illustrates and identifies the parts of a standard Designer’s Choice base cabinet.

STAN

DAR

D C

ABIN

ET S

PECS

31STANDARD CABINET SPECIFICATIONS: Base Cabinet Construction

32 STANDARD CABINET SPECIFICATIONS: Overlay DimensionsST

AND

ARD

CAB

INET

SPE

CS

These drawings illustrate the relationship between the cabinet face frame and Partial Overlay (POL) and Full Overlay (FOL) doors. They show the amount of the cabinet face frame that is visible when Partial Overlay doors or Full Overlay doors are selected.

FullOverlayFull Overlay (FOL) doors are sized to cover nearly all of the cabinet face frame. Full Overlay door styles require decorative hardware. Tofacilitateproperdooroperation,includeatleasta1”fillerbetweenthehingedsideofFullOverlaydoorstylesanddeeperadjacentobjectsincludingcabinets,walls,appliancesandcountertops.

WALL CABINET FRONT

BASE CABINET FRONT

PartialOverlayPartial Overlay (POL) doors are sized to show about an inch of the cabinet face frame, giving the door some visual depth.

WALL CABINET FRONT

BASE CABINET FRONT


STAN

DAR

D C

ABIN

ET S

PECS

33STANDARD CABINET SPECIFICATIONS: Hardware

All steel construction with nickel-plated finish, 1 7⁄16” Full Overlay hinge with self-closing feature that allows door to close unassisted when approximately 20–30 degrees open. Hinge allows less than 3⁄16” frame-to-door gap. Six-way adjustability allows superior in/out adjustment of 1⁄8”, up/down adjustment of 1⁄4” and side-to-side adjustment of 3⁄16”. Exceeds industry standard for durability. Standard feature on all Full Overlay (FOL) door styles. Hinges permit doors to open to approximately 105 degrees.

The one-piece Full Access Hidden Glides System features steel ball bearings providing quiet, stable operation. 21” extension provides full access to drawer contents. It provides self-closing convenience and smooth, dependable performance. Standard feature on all 24” deep Base and Desk cabinets.

1⁄4” steel, nickel plated. Standard feature on all wall cabinets and bookshelves.

Locks base shelves in place and prevents shelves from sliding . Designed to allow easy shelf removal. Molded from clear high-strength polycarbonate . Standard feature of all base and tall cabinets.

6-WayAdjustablePartialOverlay(POL)DoorHinge

6-WayAdjustableFullOverlay(FOL)DoorHinge

BaseLockingShelfRestMetalShelfRest

FullAccessHiddenGlidesSystem

This 3⁄4 access glide system features twin self-aligning side-mounted drawer glides. They are constructed of epoxy coated steel for quiet opening and closing. Rollers are made of Delrin for smooth operation. Side-mounted drawer glides are a standard feature on all Vanitycabinets, 21” deep Desk cabinets and Deep Roll Out Trays.

Side-MountedDrawerGlides

Allows for superior alignment of shelf with mullion. Metal construction. Six position adjustable. Standard feature on all mullion door cabinets.

MullionShelfRest

All steel construction with nickel-plated finish, 9⁄16” Partial Overlay hinge with self-closing feature that allows door to close unassisted when approximately 20–30 degrees open. Hinge allows less than 3⁄16” frame-to-door gap. Six-way adjustability allows superior in/out adjustment of 1⁄8”, up/down adjustment of 1⁄4” and side-to-side adjustment of 1⁄8”. Exceeds industry standard for durability. Standard feature on all Partial Overlay (POL) door styles. Hinges permit doors to open to approximately 105 degrees.

Base Cabinets

BaseCabinet 4DrawerBaseCabinet 3DrawerBaseCabinetInsetToeKick

Inset toe kick construction requires BTK8 matching toe kick—must be ordered separately.

34 STANDARD CABINET SPECIFICATIONS: Cabinet DimensionsST

AND

ARD

CAB

INET

SPE

CS

These illustrations specify dimensions of vertical stiles and horizontal rails, inset toe kick, cabinet heights and standard interior opening heights for Wall, Base, Vanity, Desk and Tall cabinets.

Wall Cabinets

WallCabinet42”High









DeskBaseCabinet DeskDrawerCabinet FileDrawerBase KneeholeDrawer

*Dimension for KDC36/33 is 3 1⁄8”

VanityLinenCabinet UtilityCabinet SingleOvenCabinet* DoubleOvenCabinet*

Tall Cabinets

VanityBaseCabinetStandardHeight

VanityDrawerBaseStandardHeight

VanityBaseCabinetBaseHeight

VanityDrawerBaseBaseHeight

Vanity Cabinets

*Actual height of oven opening shown. For actual width, maximum width and maximum height dimensions, please refer to Cut Out Dimensions Chart in specific cabinet SKU box.

Desk Cabinets

Trimmable in height to 4 3⁄4”

DeskBaseCabinet DeskDrawerCabinet FileDrawerBase KneeholeDrawer


STAN

DAR

D C

ABIN

ET S

PECS

35STANDARD CABINET SPECIFICATIONS: Cabinet Dimensions

36 STANDARD CABINET SPECIFICATIONS: Installation GuidelinesST

AND

ARD

CAB

INET

SPE

CS

These illustrations specify dimensions of the height requirements for top alignment of Wall and Tall cabinets (Linen, Utility, Oven) installation.

84” Top Alignment Cabinet Installation

Notes:• 84” top alignment cabinet installation includes standard Wall cabinets (30 1⁄8” high) installed 53 7⁄8” above the

finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.• Tall cabinetry (Linen, Utility, Oven) is 84” high.• Whenselectingcabinetryforinstallationaboveornearanyappliance,refertotheappliance

manufacturer’sspecificationsforclearanceandventingrequirements.

Notes:• 90” top alignment cabinet installation includes taller Wall cabinets (36 1⁄8” high) installed 53 7⁄8” above the

finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.• Tall cabinetry (Utility, Oven) is 90” high.• Whenselectingcabinetryforinstallationaboveornearanyappliance,refertotheappliance




STAN

DAR

D C

ABIN

ET S

PECS

37STANDARD CABINET SPECIFICATIONS: Installation Guidelines


Notes:• 84” top alignment cabinet installation shown.• Includes taller Wall cabinets (36 1⁄8” high) installed 47 7⁄8” above finished floor, allowing 17 7⁄8” clearance

between the Wall cabinets and a desk countertop height of 30”.• Tall cabinetry (Linen, Utility, Oven) and/or stacked cabinetry should match top alignment dimension.• Allow for adequate seating and chair height.• Refertomanufacturer’sspecificationsfordimensionsandclearancerequirementsforelectronicand/or

computercomponents.

Desk/Planning Center Cabinet Installation

Notes:• 96” top alignment cabinet installation includes full height Wall cabinets (42 1⁄8” high) installed 53 7⁄8” above the

finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.• Tall cabinetry (Utility, Oven) is 96” high.• Whenselectingcabinetryforinstallationaboveornearanyappliance,refertotheappliance


38 STANDARD CABINET SPECIFICATIONS: NotesST

AND

ARD

CAB

INET

SPE

CS

Construction Options

CON

STRU

CTIO

N O

PTIO

NS

39

40CO

NST

RUCT

ION

OPT

ION

S Construction Options LegendIcons used in this guide are shown below and indicate which construction options are available for a particular product.

APC All Plywood Construction

CCO CushionClose Glide Option

CFO Cabinet Front Only Option

FE Furniture Ends Option

ID Increased Depth Cabinet Option

IF Inverted Frame Cabinet Option

MFD Mullion Frame Door Option

MI Matching Interior Cabinet Option

OFD Open Frame Door Option

PVS Plywood Veneered Sides Option

RD Reduced Depth Cabinet Option

VDO Void Door Cabinet Option

Examples:

1. When a bullet ● is included within the icon, it indicates the construction option is available for ALL SKUs in product box unless otherwise noted.

In this product box, all SKUs (B36, B39, B42 and B48) are available with All Plywood Construction Option, CushionClose Glide Option, Cabinet Front Only Option, Furniture Ends Option, Inverted Frame Option, Plywood Veneered Sides Option and Reduced Depth Cabinet Option.

2. When a square ■ is included within the icon and next to the SKU, it indicates the construction option is ONLY available for that specific SKU.

In this product box, only the W1230, W1530, W1830 and W2130 are available with the Mullion Frame Door or Open Frame Door Options.

3. When nothing appears within the icon, it indicates the construction option is NOT available for any SKU in the product box.

In this product box, none of the SKUs are available with Increased Depth Cabinet, Mullion Frame Door or Open Frame Door Options.

● APC● CCO● CFO● FE● IF● PVS● RD

B36B39B42B48

BaseCabinet2Doors,2Drawers

● APC● CFO● FE● ID■ MFD● MI■ OFD● PVS● RD● VDO

W930■ W1230 ■ W1530 ■ W1830 ■ W2130 W2430

WallCabinet30”High,1Door

● APC● CFO● FE

IDMFD

● MIOFD

● PVS● RD● VDO

RefrigeratorWall18”Highx24”Deep

W3018 X 24 DPW3318 X 24 DPW3618 X 24 DP

CONSTRUCTION OPTIONS: Construction Options Legend


CON

STRU

CTIO

N O

PTIO

NS

41

CONSTRUCTION OPTION CODE PRICING

All Plywood Construction Option APC 20% Over List PriceCabinet Front Only Option CFO 20% Below List PriceCushionClose Glide Option CCO $58 Over List Price per Drawer

Furniture Ends Option FE$192 Over List Price (Base/Desk/Vanity)

$135 Over List Price (Wall)$345 Over List Price (Tall)

Increased Depth Cabinet Option ID 25% Over List PriceInverted Frame Cabinet Option IF 25% Over List PriceMatching Interior Cabinet Option MI 20% Over List PricePlywood Veneered Sides Option PVS 12% Over List Price

Premium Finish Cabinet OptionsCherry or Maple door styles ONLY

Cherry Chocolate GlazeMaple Auburn GlazeMaple Coffee GlazeMaple Mocha Glaze

10% Over List Price

Premium Finish Cabinet OptionsSavannah and Charlottesville Mapledoor styles ONLY

Maple Butterscotch GlazeMaple Cream Glaze

Maple Hazelnut GlazeMaple Linen

10% Over List Price

Reduced Depth Cabinet Option RD 20% Over List PriceVoid Door Wall Cabinet Option – NO Molding VDO-DFH (Drilled For Hinges) 15% Below List Price

Void Door Wall Cabinet Options – INCLUDING Molding

VDO-SAM (Shaker Accent Molding)VDO-SBAM (Single Bead Accent Molding)VDO-TBAM (Triple Bead Accent Molding)

10% Over List Price

MULLION FRAME DOOR OPTION CODEPRICEPERDOOR*

12”–30”HIGH 36”–42”HIGHMFD with Clear Glass Insert MFD Clear $284 $387MFD with Derbyshire Seeded Glass Insert MFD Derbyshire $515 $665MFD with Fern Glass Insert MFD Fern $579 $740MFD with Grid Glass Insert MFD Grid $405 $502MFD with Ribbed Glass Insert MFD Ribbed $694 $912MFD with Rice Paper Glass Insert MFD Rice Paper $515 $665MFD with Tatting Glass Insert MFD Tatting $405 $502MFD – Prepped For Glass MFD Prepped $143 $209

OPEN FRAME DOOR OPTION CODEPRICEPERDOOR*

12”–30”HIGH 36”–42”HIGHOFD with Afton Glass Insert OFD Afton $795 $874OFD with Alcove Leaded Glass Insert OFD Alcove $971 $1,234OFD with Clear Glass Insert OFD Clear $240 $279OFD with Derbyshire Seeded Glass Insert OFD Derbyshire $471 $557OFD with Fern Glass Insert OFD Fern $535 $632OFD with Fincastle Glass Insert OFD Fincastle $772 $850OFD with Grid Glass Insert OFD Grid $361 $394OFD with Keswick Glass Insert OFD Keswick $795 $874OFD with Meredith Glass Insert OFD Meredith $395 $467OFD with Oasis Glass Insert OFD Oasis $795 $874OFD with Ribbed Glass Insert OFD Ribbed $650 $804OFD with Rice Paper Glass Insert OFD Rice Paper $471 $557OFD with Tatting Glass Insert OFD Tatting $361 $394OFD – Prepped For Glass OFD Prepped $99 $101

* For cabinets with more than one door, multiply the above price by the total number of cabinet doors.

CONSTRUCTION OPTIONS: Upcharges

42 CONSTRUCTION OPTIONS: All Plywood, Plywood Veneered Sides

All Plywood Construction Option includes:● 1⁄2” plywood sides, floors and cabinet tops● 3⁄4” plywood shelves with edge banding ● 1⁄8” plywood captured back● 1⁄2” plywood inset toe kick● 1⁄2” plywood corner blocks

Notes: ● Available for individual cabinets or entire kitchen.● Available for all door styles.● All door styles feature standard interior sides of natural woodgrain laminate.● Cannot be ordered with Plywood Veneered Sides Option.● Available with Matching Interior Option. Please refer to the product SKU box for details ● MI . ● When matching interior is desired, the Matching Interior Cabinet Option must be selected for all door styles

except Maple Natural.● Matching Interior cabinetry features 3⁄4” veneered plywood shelving.● Toe Kick support blocks are not plywood.● Recommended for cabinets ordered with Premium Finish Cabinet Option.

All Plywood Construction Option ● APC

Plywood Veneered Sides Option ● PVS

Plywood Veneered Sides Option includes:● 1⁄2” plywood cabinet sides

Notes: ● Exterior sides feature BeautyGuard veneer finished to match specific cabinet color.● Available for individual cabinets or entire kitchen.● All door styles feature standard interior sides of natural woodgrain laminate. ● Available with Matching Interior Cabinet Option. Please refer to the product SKU box for details ● MI . ● When matching interior is desired, the Matching Interior Cabinet Option must be selected for all door styles

except Maple Natural.● Recommended for cabinets ordered with the Premium Finish Cabinet Option.

CON

STRU

CTIO

N O

PTIO

NS


CON

STRU

CTIO

N O

PTIO

NS

43CONSTRUCTION OPTIONS: Construction Comparison

Standard Construction

Plywood Veneered Sides Option (PVS)

All Plywood Construction Option (APC)

Cabinet Sides1⁄2” Engineered Wood with TuffTech finish

1⁄2” Plywood Exterior with BeautyGuard Finish

1⁄2” Plywood Exterior with BeautyGuard Finish

Cabinet Floor 1⁄2” Engineered Wood 1⁄2” Engineered Wood 1⁄2” Plywood

Cabinet Top (Wall Cabinets Only)

1⁄2” Engineered Wood 1⁄2” Engineered Wood 1⁄2” Plywood

Cabinet Back 1⁄8” Hardboard Substrate captured 1⁄8” Hardboard Substrate captured 1⁄8” Plywood captured

Face FrameDouble Doweled 3⁄4” x 1 5⁄8” Hardwood

Double Doweled 3⁄4” x 1 5⁄8” Hardwood

Double Doweled 3⁄4” x 1 5⁄8” Hardwood

Inset Toe Kick 1⁄2” Engineered Wood 1⁄2” Engineered Wood 1⁄2” Plywood

Corner Blocks 1⁄2” Engineered Wood 1⁄2” Engineered Wood 1⁄2” Plywood

Shelves3⁄4” Engineered Wood with Edge Banding

3⁄4” Engineered Wood with Edge Banding

3⁄4” Plywood with Edge Banding

Wall Cabinet Hanging Rails

1⁄2” Engineered Wood Top and Bottom Rails

1⁄2” Engineered Wood Top and Bottom Rails

1⁄2” Plywood Top and Bottom Rails

Base Cabinet Hanging Rails

3⁄4” Hardwood Top Rail 1⁄2” Engineered Wood Bottom Rail

3⁄4” Hardwood Top Rail 1⁄2” Engineered Wood Bottom Rail

3⁄4” Hardwood Top Rail 1⁄2” Plywood Bottom Rail

Standard Interior Natural Woodgrain TuffTech

Natural Woodgrain TuffTech Tops, Bottoms, Shelves and Back with Natural Woodgrain Laminate Side Panels

Natural Woodgrain Laminate

Matching Interior Cabinet Option

TuffTech Finish (N/A Maple Natural)

TuffTech Finish Tops, Bottoms, Shelves and Back with BeautyGuard Finish Side Panels (N/A Maple Natural)

Veneer with BeautyGuard Finish (N/A Maple Natural)

Furniture Ends Option includes: ● 3⁄4” plywood cabinet sides

Notes:● Available on individual cabinets except BEA24 Base End Angle and

WEA12 Wall End Angle cabinets. ● When the Furniture Ends Option is selected, both side panels convert to 3⁄4”

plywood sides except BEA12 and BEA12 FH Base End Angle cabinets which converts the 12” side panel only.

● Available for all door styles.● All door styles feature standard interior sides of natural woodgrain laminate with veneer exterior.● May be combined with standard construction, All Plywood Construction and all other construction options except the Plywood

Veneered Sides Option.● Cabinets with the Furniture Ends Option cannot be installed adjacent to Base Filler Pull Out (BFP3) or Wall Filler Pull Outs (WFP3__).● End panels are not required for exposed ends of cabinets with the Furniture Ends Option.● End panels are not required for installation of Decorator Matching Doors to cabinets with the Furniture Ends Option.● Cabinet Angle Molding (CAM8) cannot be used with cabinets with the Furniture Ends Option.● Sink Front Return (SFR R/L) with the Furniture Ends Option will include a rabbetted front edge.● A seam will be visible between stacked cabinets and on 96” Tall cabinets between the toe kick box and the cabinet.

Recommendations to conceal this seam:● Use decorative molding (e.g., BM8 WD Batten Molding or OGP8 Ogee Pilaster Molding)● Use a Column Filler or Wood Tall End Panel

Furniture Ends Option ● FE

44 CONSTRUCTION OPTIONS: Furniture Ends, Inverted Frame

Inverted Frame Cabinet OptionThe Inverted Frame Cabinet Option is available for most Standard Base cabinets, Base Cabinets with Factory Installed Wastebasket(s) and Base Pot and Pan Organizer Cabinets (see individual cabinet specifications for ● IF icon verifying this option availability).

Notes:● Drawer(s) below full cabinet floor. ● Adjustable shelf is included. ● Available with the All Plywood

Construction Option (APC), CushionClose Glide Option (CCO), Furniture Ends Option (FE), Plywood Veneered Sides Option (PVS) and Reduced Depth Cabinet Option (RD).

● IF

CON

STRU

CTIO

N O

PTIO

NS


CON

STRU

CTIO

N O

PTIO

NS

45CONSTRUCTION OPTIONS: Premium Finish, CushionClose

Premium Finish Cabinet OptionOur premium finish colors accentuate the detailing and textures of the cabinetry.

Cherry Chocolate Glaze – Available on all Cherry door styles. Deep brown glaze settles into the recesses, corners and grooves of warm, Spice finished Cherry to add definition and a lustrous, deep color.

Maple Auburn Glaze – Available on all Maple door styles.Deep brown glaze over a Cognac finish settles into recesses, corners, and grooves to create a dramatic contrast between the glazed and unglazed surfaces.

Maple Butterscotch Glaze – Available on Savannah Maple and Charlottesville Maple. A lightly toasted brown glaze is wiped over a warm-white painted surface to accent the grooves, corners and recesses for a distinctive patina.

Maple Coffee Glaze – Available on all Maple door styles. Deep brown glaze over a Honey finish settles into recesses, corners, and grooves to create a dramatic contrast between the glazed and unglazed surfaces.

Maple Cream Glaze – Available on Savannah Maple and Charlottesville Maple. A light, Cream glaze is wiped over a warm-white painted surface to create this clean, attractive patina.

Maple Hazelnut Glaze – Available on Savannah Maple and Charlottesville Maple. Deep brown glaze is wiped over a warm-white painted surface to create a vivid contrast.

Maple Linen – Available on Savannah Maple and Charlottesville Maple.Luxurious white painted finish on Maple hardwood accentuates crisp lines and rich detail with an inviting texture.

Maple Mocha Glaze – Available on all Maple door styles. Dark brown glaze settles into recesses, corners and grooves of warm, Spice finished Maple to add definition and a rich patina.

When ordering a Premium Finish Cabinet Option, American Woodmark strongly recommends ordering matching end panels, the All Plywood Construction Option, Furniture Ends Option or the Plywood Veneered Sides Option for all exposed cabinet sides.

The CushionClose Glide Option provides all of the features and benefits of the standard Full Access Hidden Glides System with the addition of an integrated slow-close mechanism that reduces slamming and noise.

● Slow closing system helps reduce slams and noise.● Unique air damper technology for whisper-quiet luxury.● All the features of the Full Access Hidden Glides System (Refer to Page 33).● Decorative hardware strongly recommended.

Notes:● Available with Reduced Depth Cabinet Option ● RD .● Available with Inverted Frame Cabinet Option ● IF .● Not available for Vanity or 21” deep Desk cabinets.

CushionClose Glide Option ● CCO

46 CONSTRUCTION OPTIONS: Reduced Depth OptionCO

NST

RUCT

ION

OPT

ION

S

Reduced Depth Cabinet OptionThe Reduced Depth Cabinet Option should be used when ordering less than standard depth cabinets. Reduced Depth cabinets are available in 1” reductions; minimum cabinet depth is 4”.

Orders specifying Reduced Depth Option must show the total cabinet depth.Example: Cabinet: B24 Option: RD-17 (RD – Reduce to 17” Deep)

Notes: ● There is a potential tipping hazard for Reduced Depth cabinets until they are mounted to a wall● Peninsula Base cabinets reduced to 11” or less will not have an inset toe kick● All cabinets reduced to 5” or less will not have an inset toe kick● Reduced depth minimum for Straight Appliance Garage is 5”● Reduced depth minimum for Base End Angle (BEA12 or BEA12FH) cabinets is 18”● Adding the Reduced Depth Cabinet Option does not remove adjustable shelf(s) (where applicable)● All Reduced Depth drawers feature Full Access Hidden Glides with the exception of Vanity cabinets,

21” deep Desk cabinets and standard Deep Roll Out Trays which feature side-mounted drawer glides● When ordering Reduced Depth accessories, specify the depth of the cabinet for which the accessory is

intended (e.g., SK3624-RD21 would be ordered for a UT3624 X 84-RD21)

● RD

ReducedDepth

DrawerDepthBase&24”Deep

DeskCabinets

DrawerDepthVanity&21”Deep

DeskCabinets

Side-MountDeepRollOut

TrayDepth

FullAccessCushionCloseDeepRollOut

TrayDepth

RD-23 18” — 18” 18”RD-22 18” — 18” 18”RD-21 18” — 18” 18”RD-20 15” 15” 15” 15”RD-19 15” 15” 15” 15”RD-18 15” 15” 15” 15”RD-17 12” 12” 12” 12”RD-16 12” 12” 12” 12”RD-15 12” 12” 12” 12”RD-14 9” 9” 9” 9”RD-13 9” 9” 9” 9”RD-12 9” 9” 9” 9”

RD-11 to RD-6 No Drawer No Drawer Not Available Not Available

RD-5 or RD-4 No Drawer No Drawer Not Available Not Available


Increased Depth Cabinet OptionThe Increased Depth Cabinet Option is available for most Wall cabinets up to 36” wide (refer to individual cabinet specifications for ● ID icon verifying this option availability) and all Bookshelves. Standard depth for Wall cabinets and Bookshelves is 12”.

Orders specifying Increased Depth Option must show the total cabinet depth. Example: Cabinet: W1530 Option: ID-14 (ID – Increase to 14” Deep)

Installation Notes:Wall Cabinets:

● Increased Depth Wall cabinets up to and including 18” deep can be mounted using standard installation procedures.● Wall cabinets increased to more than 18” deep must be stacked, floor mounted or installed over a refrigerator.● All Increased Depth cabinets must be securely attached in one of the following combinations: to studs in back wall and both

sides OR to studs in back wall, one side and top (e.g., two adjacent cabinets or one adjacent cabinet and a wall).

Peninsula Wall (PW) and Blind Peninsula Wall (BLPW) Cabinets: ● Increased Depth PW and BLPW cabinets up to 15” deep may be mounted at ceiling height using standard installation

procedures.● PW and BLPW cabinets increased to more than 15” deep must be stacked or floor mounted. ● When mounting cabinet at ceiling height, the cabinet must be securely attached to the ceiling rafters and to at least one other

properly mounted cabinet or studs in wall.● Additional 2” x 4” bracing may be required above ceiling if cabinets are not located directly below a rafter.● Mount cabinet to the ceiling using mounting screws of sufficient length to go through ceiling treatment and into the rafter at

least 1”. Screws must be installed at both front and back of cabinet on 16” centers (maximum span), with at least four screws per cabinet.

● ID

47CONSTRUCTION OPTIONS: Increased Depth

CON

STRU

CTIO

N O

PTIO

NS

Void Door Cabinet OptionThe Void Door Cabinet Option is available for most Wall cabinets. All void door cabinets ship without doors, battens or hinges – center stiles remain. Refer to the descriptions below to select the correct option for your layout:

● VDO-DFH (Drilled For Hinges)● Use this option when doors will be ordered separately in a complementing finish color.● Cabinet stiles are pre-drilled for door hinges.

● VDO-SBAM (Single Bead Accent Molding) VDO-TBAM (Triple Bead Accent Molding) VDO-SAM (Shaker Accent Molding)

● Use these options to create decorative open cabinets.● Cabinet stiles are pre-drilled for door hinges –

Decorative Accent Moldings will conceal hinge holes.● Molding is to be cut and field installed at the

job site.● Maple Natural door styles feature Matching Interior standard.● All other door styles must order the Matching Interior Cabinet

Option separately, including White Thermo Foil and Maple Linen.

● VDO

VDO-SBAMSingle Bead Accent

Molding

VDO-TBAMTriple Bead Accent

Molding

VDO-SAMShaker Accent

Molding

The Cabinet Front Only Option is available for most cabinets with a frame.

Notes: ● This option consists of the cabinet frame, door(s),

drawer front(s), battens and hinges.● Toe kicks are not included.

Cabinet Front Only Option ● CFO

48 CONSTRUCTION OPTIONS: Void Door, Cabinet Front OnlyCO

NST

RUCT

ION

OPT

ION

S

CON

STRU

CTIO

N O

PTIO

NS

49CONSTRUCTION OPTIONS: Matching Interior


The Matching Interior Cabinet Option is available for Wall cabinets (with exceptions noted below), Utility cabinets and Vanity Linen cabinets. This option matches the cabinet’s interior to that of the cabinet’s exterior sides.

Notes: ● Available for Wall, Utility and Vanity Linen cabinets with the

All Plywood Construction Option (APC), Plywood Veneered Sides Option (PVS), Furniture Ends Option (FE), Reduced Depth Cabinet Option (RD), Increased Depth Cabinet Option (ID) or standard construction.

● Standard construction cabinetry with the Matching Interior Cabinet Option features two-sided engineered wood TuffTech finish side panels finished to match cabinet exterior.

● Matching Interior cabinetry with the All Plywood Construction Option features 3⁄4” veneered plywood shelving

● Cabinetry with the All Plywood Construction Option (APC), Plywood Veneered Sides Option (PVS) or Furniture Ends Option (FE) features two sided BeautyGuard veneered side panels finished to match cabinet exterior.

● Recommended for Wall, Utility and Vanity Linen cabinets with the Mullion Frame Door Option (MFD) or Open Frame Door Option (OFD) or Wall cabinets with the Void Door Cabinet Option (VDO).

● Not available for Appliance Garages or any Wall cabinet with a standard matching interior.

● All finished surfaces of the Wall, Utility and Vanity Linen cabinets will be color matched including shelves, back, interior and exterior of returns, top and bottom, Corner Wall back post and back side of Peninsula Wall face frames.

● Interior accessories in Matching Interior cabinets (e.g., Spice Rack Kit, Deep Roll Out Trays, Pantry Swing Out Kit) will remain natural finish.

● Maple Natural door styles feature Matching Interior standard. All other door styles must order the Matching Interior Cabinet Option separately.

Matching Interior Cabinet Option ● MI

Matching Interior

Matching Interior

Mullion Frame Door & Open Frame Door OptionsMullion Frame (MFD) and Open Frame (OFD) doors are ordered as a construction option and are available for many Wall cabinet sizes, Utility and Vanity Linen cabinets. When either of these options are selected, the specified Decorative Glass Insert panel(s) are automatically included with the cabinet(s).

Examples: Cabinet: W1530 Option: 1 MFD Tatting Glass 30” High

Cabinet: UT2424 X 90 AS BUTT Option: 2 OFD Rice Paper Glass 36” High

Notes: ● The Mullion Frame or Open Frame Door Option for Utility and Vanity Linen cabinets applies to the top door(s) only.● Order “Prepped for Glass” for customers purchasing glass independently.● Matching Interior Cabinet Option must be ordered separately.● Decorative Glass Insert Panels and appropriate Decorator Door Clips are shipped separately from the cabinet for field installation.● When ordering Mullion Frame or Open Frame Doors, American Woodmark strongly recommends ordering the

Matching Interior Cabinet Option (MI) for all door styles except Maple Natural.

50 CONSTRUCTION OPTIONS: Mullion Frame Door & Open Frame DoorCO

NST

RUCT

ION

OPT

ION

S

Standard Profiles for OFD Cathedral and Square(excluding Del Ray)

Standard Profile for OFD Del Ray Only

● OFD ● MFD

Mullion Frame and Open Frame Door AvailabilityCabinet

DoorWidth

CabinetDoorHeight

12” High Wall

15” High Wall

18” High Wall

24” High Wall

30” High Wall

36” High Wall

42” High Wall

84” High Utility or

Vanity Linen

90” High Utility

96” High Utility

12” Wide ● ● ● ● ● ● ● ●

13” Wide ● ● ● ● ●

15” Wide ● ● ● ● ● ● ● ● ● ●

16” Wide ● ● ● ● ● ●

18” Wide ● ● ● ● ● ● ● ● ● ●

19” Wide ● ●

21” Wide ● ● ● ● ●


CON

STRU

CTIO

N O

PTIO

NS

51CONSTRUCTION OPTIONS: Mullion Frame Door & Open Frame Door

15”, 18” or 24” High Wall Cabinet

15”, 18” or 24” High Wall Cabinet

12” High Wall Cabinet

30” or 36” High Wall Cabinet84” or 90” High Utility Cabinet84” High Vanity Linen Cabinet

30” or 36” High Wall Cabinet84” or 90” High Utility Cabinet84” High Vanity Linen Cabinet

42” High Wall Cabinet96” High Utility Cabinet

42” High Wall Cabinet96” High Utility Cabinet

Standard Profiles for MFD Cathedral and Square (excluding Del Ray)

Standard Profiles for MFD Del Ray Only(12” High NOT Available for Del Ray)


NST

RUCT

ION

OPT

ION

S Mullion Frame Door and Open Frame Door Options

● 9⁄32” overall thickness● Clear glass design using zinc caming and 2 pair of

clear beveled diamonds● Insertsfor12”widedoorsfeature1pairof

verticalclearbeveleddiamonds● Insertsfor12”,15”and18”highdoors

feature1pairofhorizontalclearbeveleddiamonds

● Includes CLIP DGI BAGC Decorator Door Clips

Afton Glass Detail

AftonGlass

MFD■ OFD

● 1⁄4” thick panel● Clear seeded glass● Laminated safety glass● Includes CLIP DGI BAGC Decorator Door Clips

Derbyshire SeededGlass Detail

DerbyshireSeededGlass

■ MFD■ OFD

● 1⁄8” thick panel● Clear glue chipped glass● Tempered safety glass● Includes CLIP DGI BAGB Decorator Door Clips

Fern Glass Detail

FernGlass

■ MFD■ OFD

● 9⁄32” overall thickness● Clear glass design using zinc caming● Notavailablefor12”highdoors● Includes CLIP DGI BAGC Decorator Door Clips

Fincastle Glass Detail

FincastleGlass

MFD■ OFD

● 9⁄32” overall thickness● Grid design using round lead-free brass caming

and clear panels● Tempered safety glass● Insertsfor12”,15”,18”and24”highdoors

feature4lites● Insertsfor30”highdoorsfeature6lites● Insertsfor36”and42”highdoorsfeature

8lites● Includes CLIP DGI BAGC Decorator Door Clips

Alcove Leaded

Glass Detail

AlcoveLeadedGlass

MFD■ OFD

ClearGlass

● 1⁄8” thick panel● Clear glass● Tempered safety glass● Includes CLIP DGI BAGB Decorator Door Clips

■ MFD■ OFD


CON

STRU

CTIO

N O

PTIO

NS

53CONSTRUCTION OPTIONS: Mullion Frame Door & Open Frame Door

Mullion Frame Door and Open Frame Door Options

● 9⁄32” overall thickness● Clear glass design using zinc caming● Insertsfor12”highdoorsfeaturehorizontal

pattern● Includes CLIP DGI BAGC Decorator Door Clips

Oasis Glass Detail

OasisGlass

MFD■ OFD

● 9⁄32” thick panel● Rice paper laminated between clear glass panels● Laminated safety glass● Includes CLIP DGI BAGC Decorator Door Clips

RicePaperGlass

Rice Paper Glass Detail

■ MFD■ OFD

● 1⁄8” thick panel● Clear ribbed glass● Tempered safety glass● Includes CLIP DGI BAGB Decorator Door Clips

RibbedGlass

Ribbed Glass Detail

■ MFD■ OFD

● 1⁄8” thick panel● Clear cross reeded glass● Tempered safety glass● Includes CLIP DGI BAGB Decorator Door Clips

GridGlass

Grid Glass Detail

■ MFD■ OFD

● 9⁄32” overall thickness● Clear glass design using zinc caming and center

smoked glass flower pattern● NotrecommendedforCathedraldoorstyles● Notavailablefor12”highdoors● Includes CLIP DGI BAGC Decorator Door Clips

Keswick Glass Detail

KeswickGlass

MFD■ OFD

● 1⁄4” overall thickness (1⁄8” beveled edge thickness)● Clear glass design with 1 1⁄4” wide beveled edges● Tempered safety glass● NotrecommendedforCathedraldoorstyles● Includes CLIP DGI BAGB Decorator Door Clips

Meredith Glass Detail

MeredithGlass

MFD■ OFD


NST

RUCT

ION

OPT

ION

S Mullion Frame Door and Open Frame Door Options

CLIP DGI BAGBCLIP DGI BAGC

● Must specify Partial Overlay (POL) or Full Overlay (FOL) when ordering

● For installation of Decorative Glass Insert● Order one bag (six clips) per door● Accommodates insert panel thickness as follows: CLIP DGI BAGB = 1⁄8” inserts CLIP DGI BAGC = 1⁄4” – 9⁄32” inserts● Insert thickness reference: 1⁄8” = Clear, Fern, Grid, Meredith, Ribbed or

Tatting Glass 1⁄4” = Derbyshire Glass 9⁄32” = Afton, Alcove Leaded, Fincastle, Keswick,

Oasis or Rice Paper Glass

DecoratorDoorClips

● 1⁄8” thick panel● Clear mosaic patterned glass● Tempered safety glass● Includes CLIP DGI BAGB Decorator Door Clips

TattingGlass

Tatting Glass Detail

■ MFD■ OFD

● For customer installed inserts up to 9⁄32” thick● Available for MFD and OFD doors● Refer to pages 50 and 51 for standard profiles● Decorator Door Clips not included – order

separately

PreppedforGlass

■ MFD■ OFD


WAL

L CA

BIN

ETS

55

Dimensions Width Height Depth 9” to 48” 12” to 42” Standard 12” or 24” (Increased Depth & Reduced Depth optional on select cabinets)

SKU Coding

W 30 30 Cabinet Type width in inches height in inches (e.g., W=Wall)

Construction Options & Modifications

APC. . . . . . . . . . . . . . . . . .All Plywood ConstructionCFO. . . . . . . . . . . . . . . . . . . . . . .Cabinet Front OnlyFE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture EndsID . . . . . . . . . . . . . . . . . . . . . . . . . .Increased DepthMFD . . . . . . . . . . . . . . . . . . . . .Mullion Frame DoorMI . . . . . . . . . . . . . . . . . . . . . . . . . Matching InteriorOFD . . . . . . . . . . . . . . . . . . . . . . Open Frame DoorPVS . . . . . . . . . . . . . . . . . . Plywood Veneered SidesRD. . . . . . . . . . . . . . . . . . . . . . . . . . Reduced DepthVDO . . . . . . . . . . . . . . . . . . . . . . .Void Door Option

Wall Cabinets

56W

ALL

CABI

NET

S

Construction Options (see page 40): ●= Available for all SKUs ■= Available for selected SKUs

StandardWallCabinetsrangefrom9”to48”wide,12”to42”highandare12”deep.

SingledoorcathedralStandardWallCabinetsmustbeorderedhingedleftorright.

Forincreaseddepthcabinets,pleaserefertotheinstallationnoteslistedintheIncreasedDepthConstructionOptionsection.

Standard Wall Cabinets

W2442 BUTTW2742 BUTT

● APC● CFO● FE● ID● MFD● MI● OFD● PVS● RD● VDO

● 3 adjustable shelves

WallCabinet42”High,2Doors



W942■ W1242 ■ W1542 ■ W1842 ■ W2142





W3042 W3342W3642

W936■ W1236 ■ W1536 ■ W1836 ■ W2136




WALL CABINETS: Standard

WAL

L CA

BIN

ETS

57


W3036 W3336W3636




W930■ W1230 ■ W1530 ■ W1830 ■ W2130 W2430







W3030 W3330W3630










ID■ MFD● MI■ OFD● PVS● RD● VDO



■ W3930 ■ W4230 W4830


58W

ALL

CABI

NET

S


W4530

● 2 adjustable shelves● Hinged as shown



ID● MFD● MI● OFD● PVS● RD● VDO

W1224W1524W1824W2124

● 1 adjustable shelf







■ W3024■ W3324■ W3624 W3924 W4224



● APC● CFO● FE■ ID● MFD● MI● OFD● PVS● RD● VDO

W4524

● 1 adjustable shelf● Hinged as shown



W3027W3327W3627



● APC● CFO● FE● ID

MFD● MI

OFD● PVS● RD● VDO


WAL

L CA

BIN

ETS

59


W3918● APC● CFO● FE


● No shelf● Not drilled for adjustable shelf● Two 12” doors and one 15” center door● Hinged as shown



● No shelf● Not drilled for adjustable shelf



■ W3018 ■ W3318■ W3618 W4218




W1818W2118




W3021W3321W3621




MFD● MI


W3015W3315W3615





60W

ALL

CABI

NET

S


■ W3012 W3312■ W3612




W3915

● No shelf● Not drilled for adjustable shelf● 1 1⁄2” more frame exposed on each side

(This refers to outside frame verticals)




W3912

● No shelf● Not drilled for adjustable shelf● 1 1⁄2” more frame exposed on each side

(This refers to outside frame verticals)





WAL

L CA

BIN

ETS

61


WallCabinetswithSpiceRackrangefrom15”to21”wide,30”to42”highandare12”deep.

CathedralWallCabinetswithSpiceRackmustbeorderedhingedleftorright.

Forincreaseddepthcabinets,pleaserefertotheinstallationnoteslistedintheIncreasedDepthOptionSection.

Wall Cabinets with Spice Rack

W1542 SRW1842 SRW2142 SR

● 3 adjustable shelves● Spice Rack Kit packaged separately for

field installation● Position adjustable shelves prior to installation● Kit in natural finish solid wood features chrome

rails and three fixed shelves

WallCabinet42”High,1DoorwithSpiceRack

● APCCFO

● FE● ID

MFD● MI

OFD● PVS

RDVDO

W1536 SRW1836 SRW2136 SR





● APCCFO

● FE● ID

MFD● MI

OFD● PVS

RDVDO

W1530 SRW1830 SRW2130 SR





● APCCFO

● FE● ID

MFD● MI

OFD● PVS

RDVDO

WALL CABINETS: With Spice Rack

62W

ALL

CABI

NET

S


RefrigeratorWallCabinetsrangefrom12”to27”highandare24”deep.

Refrigerator Wall Cabinets

To ensure proper door function on a Refrigerator Wall Cabinet, allow enough clearance for the top hinge(s) on the refrigerator door. Review refrigerator manufacturer’s specifications for dimensions and clearance requirements.

W3324 X 24 DPW3624 X 24 DP

● 1 adjustable half-depth shelf



MFD● MI




W3018 X 24 DPW3318 X 24 DPW3618 X 24 DP


MFD● MI


W3027 X 24 DPW3327 X 24 DPW3627 X 24 DP

● 1 adjustable half-depth shelf


● APC● CFO● FE ID

MFD● MI


W3021 X 24 DPW3321 X 24 DPW3621 X 24 DP




IDMFD

● MIOFD


WALL CABINETS: Refrigerator Wall

WAL

L CA

BIN

ETS

63


W3315 X 24 DPW3615 X 24 DP




MFD● MI


W3912 X 24 DP

● No shelf● Not drilled for adjustable shelf● Has 1 1⁄2” additional frame exposed on each side

(This refers to the outside frame verticals)



MFD● MI


W3012 X 24 DPW3312 X 24 DPW3612 X 24 DP




MFD● MI


W3915 X 24 DP

● No shelf● Not drilled for adjustable shelf● Has 1 1⁄2” additional frame exposed on each side

(This refers to the outside frame verticals)



MFD● MI


WALL CABINETS: Refrigerator Wall

64W

ALL

CABI

NET

S


Microwave Wall Cabinets

When a Microwave Wall Cabinet is used in a design, remember to place the cabinet between two adjacent cabinets OR one cabinet and the wall. Review microwave manufacturer’s specifications for dimensions and adequate clearances for venting requirements.

MicrowaveWallCabinetsrangefrom24”to30”wide,36”or42”highandare12”or18”deep.

WMSC271842 BUTT

● Cabinet interior, microwave shelf opening and one adjustable shelf finished to match cabinet exterior

● 3⁄4” veneered microwave shelf included● Designed to accommodate countertop

style microwave● Unit must be installed between two adjacent

cabinets or one cabinet and wall● Lower frame opening (including shelf): 23 3⁄4” W x 15 1⁄4” H x 23 3⁄4” D● Refertoappliancemanufacturer's

specificationsforadequateclearances

WallMicrowave42”High,2Doors

● APCCFO

● FE● ID

MFDMIOFD


WMSC271236 BUTT WMSC271836 BUTT

● Cabinet interior and microwave shelf opening finished to match cabinet exterior

● 3⁄4” veneered microwave shelf included● Not drilled for adjustable shelf● Designed to accommodate countertop


cabinets or one cabinet and wall● Lower frame opening (including shelf): WMSC271236 BUTT: 23 3⁄4” W x 18 5⁄8” H x 17 3⁄4” D

WMSC271836 BUTT: 23 3⁄4” W x 18 5⁄8” H x 23 3⁄4” D● Refertoappliancemanufacturer's



AWMSC271236 BUTT 12”WMSC271836 BUTT 18”

● APCCFO

● FE● ID

MFDMIOFD


WALL CABINETS: Microwave Wall

WAL

L CA

BIN

ETS

65


WMSC301236




cabinets or one cabinet and wall● Lower frame opening (including shelf): 26 3⁄4” W x 18 5⁄8” H x 17 3⁄4” D● Refertoappliancemanufacturer's



● APCCFO

● FE● ID

MFDMIOFD





cabinets or one cabinet and wall● Lower frame opening (including shelf): WCMSC241236 BUTT: 20 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D

WCMSC271236 BUTT: 23 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D● Refertoappliancemanufacturer's


WallCompactMicrowave36”High,2Doors

AWCMSC241236 BUTT 24”WCMSC271236 BUTT 27”

WCMSC241236 BUTTWCMSC271236 BUTT

● APCCFO

● FE● ID

MFDMIOFD


WALL CABINETS: Microwave Wall

66W

ALL

CABI

NET

S


PeninsulaWallCabinetsrangeinsizefrom12”to42”wide,18”to42”highandare12”deepwithdoorsonbothsidesofthecabinet.


Peninsula Wall Cabinets

PW2442 BUTT


PeninsulaWall42”High,4Doors

● APCCFO

● FE● ID● MFD● MI● OFD● PVS● RD● VDO

PW3042 PW3642



● APCCFO


PW2436 BUTT



● APCCFO


PW3036 PW3636



● APCCFO


WALL CABINETS: Peninsula Wall

WAL

L CA

BIN

ETS

67


PW1224PW1824

● 1 adjustable shelf● Hinged as shown

● APCCFO



■ PW1230 ■ PW1530 ■ PW1830 PW2430

● 2 adjustable shelves● Hinged as shown


● APCCFO

● FE● ID■ MFD● MI■ OFD● PVS● RD● VDO

■ PW3030 ■ PW3630 PW4230



● APCCFO

● FE■ ID● MFD● MI● OFD● PVS● RD● VDO

PW2424 BUTT



● APCCFO


PW3027PW3627



● APCCFO

● FE● ID

MFD● MI


■ PW3024■ PW3624 PW4224



● APCCFO



68W

ALL

CABI

NET

S


PW2418 BUTT



● APCCFO


■ PW3018 ■ PW3618 PW4218



● APCCFO


PW1818

● No shelf● Not drilled for adjustable shelf● Hinged as shown


● APCCFO


PW3021PW3621



● APCCFO

● FE● ID

MFD● MI



WAL

L CA

BIN

ETS

69


CathedraldoorWallEndAngleCabinetsmustbeorderedhingedleftorright.

Wall End Angle Cabinets WallEndAngle42”High

WEA1242

● Requires 12” x 12” space● 3 adjustable shelves ● Features a DR1542 door

● APCCFOFEID

● MFD● MI● OFD● PVS

RD● VDO

WEA1236

● Requires 12” x 12” space● 2 adjustable shelves● Features a DR1536 door

WallEndAngle36”High

● APCCFOFEID


RD● VDO

WEA1230

● Requires 12” x 12” space● 2 adjustable shelves● Features a DR1530 door

WallEndAngle30”High

● APCCFOFEID


RD● VDO

WALL CABINETS: Wall End Angle

70W

ALL

CABI

NET

S


BlindWallCabinetsrangeinwidthfrom24”to48”andinheightfrom24”to42”.

SingledoorcathedralBlindWallCabinetsmustbeorderedhingedleftorright.


Blind Wall Cabinets

When a Blind Wall Cabinet is used in a design, remember to include the appropriate filler. For a finished, decorative look add an Overlay Filler (Full Overlay door styles) to Universal Fillers or Decorative Blocks to a Fluted Beaded Filler.

BLW24/2742BLW30/3342 BLW33/3642

● 3 adjustable shelves● Includes 1⁄8” panel to cover blind opening

(field trim and install)● Refer to Blind Wall Cabinet Installation Chart

for specifications● MustorderUniversalFillerseparately

BlindWall42”High,1Door


■ BLW36/3942 BUTT BLW39/4242 BUTT




BlindWall42”High,2Doors


BLW24/2736 BLW30/3336 BLW33/3636






■ BLW36/3936 BUTT BLW39/4236 BUTT






WALL CABINETS: Blind Wall

WAL

L CA

BIN

ETS

71


BLW39/4230 BUTT








■ BLW24/2730 ■ BLW27/3030 ■ BLW30/3330 ■ BLW33/3630 BLW36/3930





BLW42/4530 BLW45/4830BLW48/5130







BLW24/2724BLW27/3024BLW30/3324BLW33/3624

● 1 adjustable shelf● Includes 1⁄8” panel to cover blind opening





BLW36/3924 BUTT







72W

ALL

CABI

NET

S


BlindWallCabinetInstallationChart

FullOverlay(FOL)DoorStylesFull Overlay door styles require decorative hardware, which has been calculated into dimensions.*Dimension requirements do not include optional Overlay Fillers – add 7⁄8” if Overlay Fillers will be used.

Cabinet

ActualCabinetWidth

DoorOpening Door(s)

Wall Space A Exposed Frame B

MinimumSpace*

MaximumPull

MaximumSpace

MinimumSpace*

MaximumSpace

BLW24/27 24” 8 3⁄4” DR12__ 26 1⁄4” 1 3⁄4” 28” 14 1⁄4” 16”BLW27/30 27” 11 3⁄4” DR15__ 29 1⁄4” 1 3⁄4” 31” 17 1⁄4” 19”

BLW30/33 30” 14 3⁄4” DR18__ 32 1⁄4” 1 3⁄4” 34” 20 1⁄4” 22”

BLW33/36 33” 17 3⁄4” DR21__ 35 1⁄4” 1 3⁄4” 37” 23 1⁄4” 25”

BLW36/3930 36” 20 3⁄4” DR2430 38 1⁄4” 1 3⁄4” 40” 26 1⁄4” 28”

BLW36/39 BUTT 36” 20 3⁄4” DR12__BUTT (2) 38 1⁄4” 1 3⁄4” 40” 26 1⁄4” 28”

BLW39/42 BUTT 39” 23 3⁄4” DR13__BUTT (2) 41 1⁄4” 1 3⁄4” 43” 29 1⁄4” 31”

BLW42/45 42” 11 3⁄4” DR15__ (2) 44 1⁄4” 1 3⁄4” 46” 32 1⁄4” 34”

BLW45/48 45” 13 1⁄4” DR16__ (2) 47 1⁄4” 1 3⁄4” 49” 35 1⁄4” 37”BLW48/51 48” 14 3⁄4” DR18__ (2) 50 1⁄4” 1 3⁄4” 52” 38 1⁄4” 40”

PartialOverlay(POL)DoorStylesWall Space A requirements include optional decorative hardware clearance.1 1⁄4” may be deducted if decorative hardware is not used.

Cabinet

ActualCabinetWidth

DoorOpening Door(s)


MinimumSpace

MaximumPull

MaximumSpace

MinimumSpace

MaximumSpace

BLW24/27 24” 8 3⁄4” DR12__ 25 3⁄8” 2 5⁄8” 28” 13 3⁄8” 16”BLW27/30 27” 11 3⁄4” DR15__ 28 3⁄8” 2 5⁄8” 31” 16 3⁄8” 19”

BLW30/33 30” 14 3⁄4” DR18__ 31 3⁄8” 2 5⁄8” 34” 19 3⁄8” 22”

BLW33/36 33” 17 3⁄4” DR21__ 34 3⁄8” 2 5⁄8” 37” 22 3⁄8” 25”

BLW36/3930 36” 20 3⁄4” DR2430 37 3⁄8” 2 5⁄8” 40” 25 3⁄8” 28”

BLW36/39 BUTT 36” 20 3⁄4” DR12__BUTT (2) 37 3⁄8” 2 5⁄8” 40” 25 3⁄8” 28”

BLW39/42 BUTT 39” 23 3⁄4” DR13__BUTT (2) 40 3⁄8” 2 5⁄8” 43” 28 3⁄8” 31”

BLW42/45 42” 11 3⁄4” DR15__ (2) 43 3⁄8” 2 5⁄8” 46” 31 3⁄8” 34”

BLW45/48 45” 13 1⁄4” DR16__ (2) 46 3⁄8” 2 5⁄8” 49” 34 3⁄8” 37”BLW48/51 48” 14 3⁄4” DR18__ (2) 49 3⁄8” 2 5⁄8” 52” 37 3⁄8” 40”


WAL

L CA

BIN

ETS

73


BlindWallCabinetDimensions

Cabinet Door Width OpeningCabinet A B C D

BLW24/27 24” 8 3⁄4” 6 1⁄4” 7 3⁄8” BLW27/30 27” 11 3⁄4” 6 1⁄4” 7 3⁄8” BLW30/33 30” 14 3⁄4” 6 1⁄4” 7 3⁄8” BLW33/36 33” 17 3⁄4” 6 1⁄4” 7 3⁄8” BLW36/3930 36” 20 3⁄4” 6 1⁄4” 7 3⁄8” BLW36/39 BUTT 36” 20 3⁄4” 6 1⁄4” 7 3⁄8”BLW39/42 BUTT 39” 23 3⁄4” 6 1⁄4” 7 3⁄8”

Cabinet Door Width OpeningCabinet A B C D

BLW42/45 42” 11 3⁄4” 6 1⁄4” 7 3⁄8” BLW45/48 45” 13 1⁄4” 6 1⁄4” 7 3⁄8” BLW48/51 48” 14 3⁄4” 6 1⁄4” 7 3⁄8”


74W

ALL

CABI

NET

S



Blind Peninsula Wall Cabinets

BLPW2442 BUTT


(field trim and install)● Refer to Blind Peninsula Wall Cabinet Installation

Chart for specifications● MustorderUniversalFillersseparately

BlindPeninsulaWall42”High,3Doors

● APCCFO


BLPW2436 BUTT





● APCCFO


BLPW2430 BUTT





● APCCFO


BLPW2424 BUTT





● APCCFO


WALL CABINETS: Blind Peninsula Wall

WAL

L CA

BIN

ETS

75


BlindPeninsulaWallCabinetInstallationChart

FullOverlay(FOL)DoorStylesFull Overlay door styles require decorative hardware, which has been calculated into dimensions.*Must use these dimensions if optional Overlay Fillers will be used.

Cabinet

ActualCabinet Width

Door Opening

CDoor

C

Door Opening

DDoors (2)

D

Wall Space A Exposed Frame B Filler (at wall)

Minimum Space

Maximum Pull

Maximum Space*

MinimumSpace

MaximumSpace* Minimum Maximum*

BLPW2424 BUTT 24” 8 3⁄4” DR1224 20 3⁄4” DR1224 BUTT 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”BLPW2430 BUTT 24” 8 3⁄4” DR1230 20 3⁄4” DR1230 BUTT 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”

BLPW2436 BUTT 24” 8 3⁄4” DR1236 20 3⁄4” DR1236 BUTT 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”BLPW2442 BUTT 24” 8 3⁄4” DR1242 20 3⁄4” DR1242 BUTT 26 1⁄4” 3⁄4” 27” 14 1⁄4” 15” 2 1⁄4” 3”


Cabinet

ActualCabinet Width

Door Opening

CDoor

C

Door Opening

DDoors (2)

D


Minimum Space

Maximum Pull

Maximum Space

MinimumSpace

MaximumSpace Minimum Maximum

BLPW2424 BUTT 24” 8 3⁄4” DR1224 20 3⁄4” DR1224 BUTT 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”BLPW2430 BUTT 24” 8 3⁄4” DR1230 20 3⁄4” DR1230 BUTT 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”

BLPW2436 BUTT 24” 8 3⁄4” DR1236 20 3⁄4” DR1236 BUTT 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”BLPW2442 BUTT 24” 8 3⁄4” DR1242 20 3⁄4” DR1242 BUTT 25 3⁄8” 1 5⁄8” 27” 13 3⁄8” 15” 1 3⁄8” 3”

WALL CABINETS: Blind Peninsula Wall

76W

ALL

CABI

NET

S


CornerWallCabinetsrangeinheightfrom24”to48”.

SingledoorcathedralCornerWallCabinetsmustbeorderedhingedleftorright.

Corner Wall Cabinets

To ensure proper door function, cabinets or other design elements deeper than 12” should not be placed on either side of the Corner Wall Cabinet.

If the Corner Wall Cabinet is deeper than the adjacent cabinets, fillers are recommended for placement left and right of the Corner Wall to ensure proper door operation on standard depth wall cabinets.

For a finished, decorative look add Overlay Fillers (Full Overlay door styles) to Universal Fillers or Decorative Blocks to Fluted Beaded Fillers.

CW2442 CW2742

● 3 adjustable shelves● Door opening is 11 3⁄4” wide● Features a DR1542 door

CornerWall42”High

A BCW2442 12” 24”CW2742 15” 27”

● APCCFO

● FEID


RD● VDO

CW2436 CW2736


CornerWall36”High

A BCW2436 12” 24”CW2736 15” 27”

● APCCFO

● FEID


RD● VDO

WALL CABINETS: Corner Wall

WAL

L CA

BIN

ETS

77


CW2430 CW2730


CornerWall30”High

A BCW2430 12” 24”CW2730 15” 27”

● APCCFO

● FEID


RD● VDO

CW2424 CW2724

● 1 adjustable shelf (non-removable)● Door opening is 11 3⁄4” wide● Features a DR1524 door● Glass Shelf Kit not available

CornerWall24”High

A BCW2424 12” 24”CW2724 15” 27”

● APCCFO

● FEID


RD● VDO

CWS2430 WDCWS2436 WDCWS2442 WD

● Fixed wood spin unit mounted on cabinet floor● 30” and 36” high feature one wood spin unit

attached to 3⁄4” adjustable shelf● 42” high features two wood spin units attached to

3⁄4” adjustable shelf● Natural finish wood spin units feature 1” lip and

are 18” in diameter● Door opening is 11 3⁄4” wide● Features a 15” wide door: CWS2430 WD = DR1530 CWS2436 WD = DR1536 CWS2442 WD = DR1542

CornerWallwithWoodSpinUnits

ACWS2430 WD 30 1⁄8”CWS2436 WD 36 1⁄8”CWS2442 WD 42 1⁄8”

● APCCFO

● FEID


RD● VDO


78W

ALL

CABI

NET

S


CWS2430

● Features two 18” diameter full round spin shelves with pole (top shelf adjustable)

● Shelves are white high strength plastic● Door opening is 11 3⁄4” wide● Features a DR1530 door

CornerWallwithPlasticSpinShelves

● APCCFO

● FEID


RD● VDO

CWT2448

● 2 adjustable shelves● Solidwoodtambourdoor● Door opening: 11 3⁄4” wide x 26 7⁄8” high● Tambour opening: 11 3⁄4” wide x 15 5⁄16” high● Field trimmable in height by 1⁄2” at bottom● Features a DR1530 door

CornerWallwithTambour

● APCCFO

● FEID


RD● VDO

CWTS2448 WD

● Fixed wood spin unit mounted on cabinet floor● Features one wood spin unit attached to 3⁄4”

adjustable shelf● Natural finish wood spin units feature 1” lip and

are 18” in diameter● Solidwoodtambourdoor● Door opening: 11 3⁄4” wide x 26 7⁄8” high● Tambour opening: 11 3⁄4” wide x 15 5⁄16” high● Field trimmable in height by 1⁄2” at bottom● Features a DR1530 door

CornerWallwithTambourandWoodSpinUnits

● APCCFO

● FEID


RD● VDO


WAL

L CA

BIN

ETS

79


CWTS2448

● Features two 18” diameter full round spin shelves with pole (top shelf adjustable)

● Shelves are white high strength plastic● Solidwoodtambourdoor● Door opening: 11 3⁄4” wide x 26 7⁄8” high● Tambour opening: 11 3⁄4” wide x 15 5⁄16” high● Field trimmable in height by 1⁄2” at bottom● Features a DR1530 door

CornerWallwithTambourandPlasticSpinUnits

● APCCFO

● FEID


RD● VDO

WER24WER2436WER2442

● 30” and 36” high feature two adjustable shelves● 42” high features three adjustable shelves

WallEasyReach

AWER24 30 1⁄8” WER2436 36 1⁄8”WER2442 42 1⁄8”

● APCCFO

● FEIDMFD

● MIOFD

● PVSRDVDO

PWCW2430 BUTTPWCW2436 BUTTPWCW2442 BUTT

● 2 doors on peninsula side● 30” and 36” high feature two adjustable shelves● 42” high features three adjustable shelves● Recommend attachment to soffit or ceiling and to

all adjacent cabinets● Glass Shelf Kit not available

PeninsulaCornerWall

APWCW2430 BUTT 30 1⁄8”PWCW2436 BUTT 36 1⁄8”PWCW2442 BUTT 42 1⁄8”

● APCCFO

● FEID


RD● VDO


80W

ALL

CABI

NET

S


Specialty Wall Cabinets

SDC18SDC24SDC30SDC36

● Designed for horizontal or vertical installation● Vertical installation may require the use of fillers

and/or molding which must be ordered separately● All door styles feature veneered engineered wood● Flush sides with no face frame or 1⁄4” reveals● All wood drawer body with dovetail construction● Wood door styles feature matching wood knobs● Maple Linen and White Thermo Foil door styles

feature white porcelain knobs

SpiceDrawerCabinet

Number A of DrawersSDC18 18” 3SDC24 24” 4SDC30 30” 5SDC36 36” 6

SC30SC36SC42

● Designed for horizontal or vertical installation● Vertical installation may require the use of fillers

and/or molding which must be ordered separately● Opening size is 5” wide x 4 1⁄2” high (horizontal)

which will accommodate most wine bottles and various other storage needs

● All door styles feature 3⁄4" veneered engineered wood finished to match cabinet exterior

● Interior finished to match cabinet exterior● Flush sides with no face frame or 1⁄4” reveals● Cannot be retrofitted with Spice Drawer

Cabinet drawers

StorageCube

Number A of OpeningsSC30 30” 5SC36 36” 6SC42 42” 7

WALL CABINETS: Specialty

WAL

L CA

BIN

ETS

81


WSC1818WSC2424

● Interior finished to match cabinet exterior● Standard cabinet sides are 1⁄2” engineered wood

with TuffTech finish ● All door styles feature 3⁄4” veneered plywood

partitions● Cabinet must be installed between two adjacent

cabinets or one cabinet and wall● Accent Molding recommended – order separately

WineStorageCabinet

Number A B of BottlesWSC1818 18” 18 1⁄8” 12WSC2424 24” 24 1⁄2” 30

● APC● FE● PVS

WRC1530WRC1830WRC3015WRC3018WRC3615

● Interior finished to match cabinet exterior● Wine bottle opening is 4” x 4”

WineRackCabinet

Number A B of BottlesWRC1530 15” 30 1⁄8” 10WRC1830 18” 30 1⁄8” 11WRC3015 30” 15 1⁄8” 10WRC3018 30” 18 1⁄8” 11WRC3615 36” 15 1⁄8” 13


WCC2415WCC3015WCC3615

● Interior finished to match cabinet exterior● Use with 11 1⁄2” diameter (or smaller) dinner plates● Spindles can be removed for cleaning● Spindles shipped uninstalled● Accent Molding recommended – order separately● Use of Accent Molding will reduce available plate

diameter to 11”

WallChinaCabinet

Number A of PlatesWCC2415 24” 9WCC3015 30” 12WCC3615 36” 15


SEW30SEW36SEW42

● Interior finished to match cabinet exterior● Invert for left or right● All door styles feature veneered engineered wood

sides, back and shelves● 1 1⁄8” screw recommended from inside of adjacent

cabinet for installation● 42” high features three centered shelves

ShelfEndWallRoundTopandBottom

SEW30L SQTSEW30R SQTSEW36L SQTSEW36R SQTSEW42L SQTSEW42R SQT

● Interior finished to match cabinet exterior● Mustbeorderedasleftorright–NOT

reversible● All door styles feature veneered engineered wood



ShelfEndWallSquareTopandRoundBottom

SEW30 SQTBSEW36 SQTBSEW42 SQTB

● Interior finished to match cabinet exterior● Invert for left or right● All door styles feature veneered engineered wood



ShelfEndWallSquareTopandBottom

Left is shown


82W

ALL

CABI

NET

S



AG2418AG2718

● Solidwoodtambourdoor● Installs below CW and CWS Corner Wall cabinets● Tambour opening: 11 3⁄4” wide x 15 5⁄16” high● Shipped with end panels unattached● Field trimmable in height to 17 3⁄8”

CornerApplianceGarage

A BAG2418 12” 24”AG2718 15” 27”

● APC● FE● ID● PVS● RD

AGS24

● Solidwoodtambourdoor● Installs below minimum 24” wide Wall cabinet● Tambour opening: 17 3⁄4” wide x 15 5⁄16” high● Shipped with end panels unattached● Reduced depth minimum is 5”● Field trimmable in height to 17 3⁄8”

StraightApplianceGarage

WFP330WFP336WFP342

● Mustbeinstalledbetweentwowallcabinetsbehindthefaceframein3”ofwallspace

● Cannot be installed next to appliances, cabinets constructed with flush ends (e.g., Spice Drawer Cabinet), or cabinets with the Furniture Ends Option

● No side panels● Filler shipped unattached for field installation● An overlay filler is recommended for Full Overlay

door styles – order separately● Features full access ball bearing glides● All 1 5⁄8” wide wood shelves feature chrome rails● Decorative hardware strongly recommended

WallFillerPullOut

Number A of ShelvesWFP330 30 1⁄8” 4 (3 adjustable)WFP336 36 1⁄8” 5 (4 adjustable)WFP342 42 1⁄8” 6 (5 adjustable)


WAL

L CA

BIN

ETS

83


RH3624 AVRH4224 AV

ArchedValanceRangeHood

RH3624 SVRH4224 SV

StraightValanceRangeHood

RH3024 TRH3624 T

TaperedRangeHood

RangeHoodChimney

ARHC36 17 3⁄8” RHC42 23 3⁄8”

● Must be installed between two wall cabinets● Silver metallic liner included● Liner dimensions:

30”: 29 15⁄16” wide x 16 1⁄2” deep x 4” high36”: 35 15⁄16” wide x 16 1⁄2” deep x 4” high

● Order range hood blower separately

● Wall mounted installation only● Silver metallic liner included● Liner dimensions:


● Order range hood blower separately● May be accessorized with Range Hood

Chimney – order separately

A BRH3624 SV 37 3⁄4” 18 1⁄2”RH4224 SV 43 3⁄4” 24 1⁄2”

ARH3024 T 30”RH3624 T 36”

● Wall mounted installation only● Silver metallic liner included● Liner dimensions:


● Order range hood blower separately● May be accessorized with Range Hood

Chimney – order separately

A BRH3624 AV 37 3⁄4” 18 1⁄2”RH4224 AV 43 3⁄4” 24 1⁄2”

● Field trimmable in height● All door styles feature 3⁄4” solid wood finished to

match cabinet exterior● Features two chimney mounting blocks with metal

fasteners● For use with Straight Valance or Arched Valance

Range Hood

RHC36RHC42

WALL CABINETS: Range Hoods

84W

ALL

CABI

NET

S


RangeHoodBlower390CFMVented

RHVENT 250


● Designed for vented installation where exhaust is vented to exterior of home

● Durable, powder coated silver finish● Features a two-speed motor and enclosed light

controlled by rocker switches● 6 5⁄8” fan provides 250 CFM air delivery and sound

level of 8.0 sones● Includes one-piece washable aluminum mesh filter● Requires 7” round duct for venting to exterior

(not included)● Installation and care instructions included

RHVENT 390


● Durable, powder coated silver finish● Features a multi-speed fan and enclosed light

controlled by separate switches● Centrifugal blower provides 390 CFM air delivery

and sound level of 5.5 sones● Includes one-piece washable aluminum mesh filter● Requires 6” round duct for venting to exterior



RHVENT 500


● Durable, stainless steel with brushed finish● Features a multi-speed fan and enclosed light


and sound level of 8.0 sones● Includes two 12V 20W halogen lamps● Includes two washable filters with stainless

steel covers● Requires 6” round duct for venting to exterior


RHVENT 250R

RangeHoodBlower250CFMRecirculating

● Designed for recirculating installation where exhaust is vented back into kitchen

● Includes ductwork, metal soffit air grille, charcoal filter(s) and clips

● Durable, powder coated silver finish● Features a two-speed motor and enclosed light

controlled by rocker switches● 6 5⁄8” fan provides 250 CFM air delivery and sound

level of 8.0 sones● Installation and care instructions included

RangeHoodBlower390CFMRecirculating

RHVENT 390R

● Designed for recirculating installation where exhaust is vented back into kitchen

● Includes ductwork, metal soffit air grille, charcoal filter(s) and clips

● Durable, powder coated silver finish● Features a multi-speed fan and enclosed light


and sound level of 5.5 sones● Installation and care instructions included

WALL CABINETS: Range Hoods

WAL

L CA

BIN

ETS

85


● Field trimmable● All door styles feature solid wood finished to

match cabinet exterior

ArchedValance

VA36CVA48CVA60CVA72C

Maximum Trim A (61⁄8” each end)VA36C 36 1⁄4” 24”VA48C 48 1⁄4” 36”VA60C 60 1⁄4” 48”VA72C 72 1⁄4” 60”

VA48DVA72D



AppliqueValance

A Maximum TrimVA48D 48 1⁄4” 18” (15 1⁄8” each end)VA72D 72 1⁄4” 18” (27 1⁄8” each end)



CrownValance

V30 CRV36 CRV42 CRV48 CRV60 CRV72 CR

Maximum Trim A (1 1⁄2” each end)V30 CR 30 1⁄4” 27 1⁄4”V36 CR 36 1⁄4” 33 1⁄4”V42 CR 42 1⁄4” 39 1⁄4”V48 CR 48 1⁄4” 45 1⁄4”V60 CR 60 1⁄4” 57 1⁄4”V72 CR 72 1⁄4” 69 1⁄4”

Accessories

RaisedPanelArchedValance


match cabinet exterior● V60 RP and V72 RP feature three panels

V36 RPV42 RPV48 RPV60 RPV72 RP

Maximum Trim A (3” Each End)V36 RP 36” 30” V42 RP 42” 36” V48 RP 48” 42” V60 RP 60” 54” V72 RP 72” 66”

WALL CABINETS: Accessories

86W

ALL

CABI

NET

S


V30 SHV36 SHV42 SHV48 SHV60 SHV72 SH



ShakerValance

Maximum Trim A (3” each end)V30 SH 30 1⁄4” 24 1⁄4”V36 SH 36 1⁄4” 30 1⁄4”V42 SH 42 1⁄4” 36 1⁄4”V48 SH 48 1⁄4” 42 1⁄4”V60 SH 60 1⁄4” 54 1⁄4”V72 SH 72 1⁄4” 66 1⁄4”

V36 TV72 TV96 T



TraditionalValance

AV36 T 36 1⁄4”V72 T 72 1⁄4”V96 T 96 1⁄4”

VA48VA72



StraightValance

AVA48 48 1⁄4”VA72 72 1⁄4”

● For use in 12” deep wall cabinets● Glass Shelf Kit includes two 1⁄4” high-strength

tempered glass shelves● Kit does not include shelf rests● Refer to individual SKU box for number of shelves

required and/or available● GSK12 – GSK36: 10 7⁄16” deep● Tempered glass cannot be field trimmed

GlassShelfKit12”Deep

GSK12GSK15GSK18GSK21GSK24GSK27GSK30

GSK33GSK36GSKWA24GSKWA27GSKWEA12

VAL36VAL48VAL60VAL72



ScallopedValance

Maximum Trim A (5” each end)VAL36 36 1⁄4” 26 1⁄4”VAL48 48 1⁄4” 38 1⁄4”VAL60 60 1⁄4” 50 1⁄4”VAL72 72 1⁄4” 62 1⁄4”

GlassShelfKit6”&9”Deep

GSK12-9GSK15-9GSK18-9GSK21-9GSK24-9GSK27-9GSK30-9GSK33-9GSK36-9

GSK12-6GSK15-6GSK18-6GSK21-6GSK24-6GSK27-6GSK30-6GSK33-6GSK36-6

AGSK__-9 7 7⁄16”GSK__-6 4 7⁄16”

● For use in wall cabinets reduced to 6” or 9” deep● Glass Shelf Kit includes two 1⁄4” high-strength

tempered glass shelves● Kit does not include shelf rests● Refer to individual SKU box for number of shelves

required and/or available● Tempered glass cannot be field trimmed


WAL

L CA

BIN

ETS

87


WR36

● Field trimmable to 24” (five bottles) or 30” (six bottles)

● All door styles feature solid wood finished to match cabinet exterior

WineRack

● Field trimmable to install below 18”, 24”, 30” or 36” wide wall cabinet


● Maximum stem glass base is 3 1⁄8” in diameter● Not sized to fit modified depth cabinets

StemGlassHolder

SGH36U

SRK15SRK18SRK21

● Field installation accessory● Kit features natural finish solid wood with

chrome rails and three fixed shelves● Position cabinet adjustable shelves prior to

installation ● For Wall cabinets 30” or higher● SRK15 mounts to 15” wide door● SRK18 mounts to 18” wide door● SRK21 mounts to 21” wide door

SpiceRackKit

A BSRK15 9 1⁄2” 10 1⁄2”SRK18 12 1⁄2” 13 1⁄2”SRK21 15 1⁄2” 16 1⁄2”

SUC36T

● Field trimmable● Installs below wall cabinet up to 36” wide● All door styles feature solid wood finished to

match cabinet exterior● Unassembled● Lower shelf is 4 1⁄4” deep● Not sized to fit modified depth cabinets

ShelfUnderCabinet


88W

ALL

CABI

NET

S


WALL CABINETS: Notes

Dimensions Width Height Depth 6” to 48” 341⁄2” 24” (Reduced Depth optional on select cabinets)

SKU Coding

B 30 Cabinet Type width in inches (e.g., B=Base)


APC. . . . . . . . . . . . . . . . . .All Plywood ConstructionCCO . . . . . . . . . . . . . . . . . . . . . CushionClose GlideCFO. . . . . . . . . . . . . . . . . . . . . . .Cabinet Front OnlyFE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture EndsIF . . . . . . . . . . . . . . . . . . . . . . . . . . .Inverted FramePVS . . . . . . . . . . . . . . . . . . Plywood Veneered SidesRD. . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth

Base Cabinets

BASE

CAB

INET

S

89

StandardBaseCabinetsare341⁄2”highby24”deepandrangefrom9”to48”wide.

CathedraldoorsarenotavailableonStandardBaseCabinets.

SingledoorStandardBaseCabinetsarehingedleftandcanbereversedinthefield.

InsettoekickconstructionrequiresBTK8matchingtoekick–mustbeorderedseparately.

Standard Base Cabinets

TB9

● No shelf● Full height door● For vertical tray storage● Order S924 adjustable shelf separately

BaseCabinetNoDrawer

● APC● CCO● CFO● FE

IF● PVS● RD

BasePantryPullOut

BPP9

● Standard 9” wide full height door● One fixed and three adjustable shelves with

chrome rails ● Features three individual heavy-duty full

access glides● Decorative hardware strongly recommended

● Full height door● Full depth adjustable shelf● TD3 Cabinet Tray Divider packaged separately for

field installation● Reduced depth minimum is 14”

BaseCabinetNoDrawerwith

TrayDividerandShelf

TB9 TDS● APC● CCO● CFO● FE

IF● PVS● RD

● APC● CCO

CFO● FE

IF● PVS

RD

BTDP9

● Standard 9” wide full height door● Features heavy-duty full access glides● Tray divider is adjustable to accommodate

various storage solutions● Adjustable T-Bar included for storage customization● Decorative hardware strongly recommended

BaseTrayDividerPullOut

● APCCCOCFO

● FEIF

● PVSRD

BASE

CAB

INET

S90


BASE CABINETS: Standard

B12B15B18B21B24

● Full depth adjustable shelf

BaseCabinet1Door,1Drawer


B30B33B36 1TD

● Half-depth adjustable shelf● Center support for shelf provided

BaseCabinet2Doors,1Drawer

B24 BUTTB27 BUTT

● B24 BUTT features full depth adjustable shelf● B27 BUTT features half-depth adjustable shelf● Center support for half-depth shelf provided



B30 1BB33 1BB36 1B 1TD

● Left door with batten● Half-depth adjustable shelf● Center support for shelf provided




B36 1B

● Left door with batten● Half-depth adjustable shelf● Center support for shelf provided



B36B39B42B48

● Half-depth adjustable shelf● Center support for shelf provided



BASE

CAB

INET

S

91



● Half-depth adjustable shelf● Center support for shelf provided● Hinged as shown – center door can be reversed in

the field


B45● APC● CCO● CFO● FE● IF● PVS● RD

BASE

CAB

INET

S92



BaseCabinetswithDeepRollOutTraysare341⁄2”highby24”deepandrangefrom12”to48”wide.

CathedraldoorsarenotavailableonBaseCabinetswithDeepRollOutTrays.

SingledoorBaseCabinetswithDeepRollOutTraysarehingedleftandcanbereversedinthefield.


Base Cabinets with Deep Roll Out Trays

B12 FWTB15 FWTB18 FWTB21 FWTB24 FWT

● Deep Roll Out Tray (DROT) on floor● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable


1DeepRollOutTray

● APC● CCO

CFO● FE● PVS● RD

B24 FWT BUTTB27 FWT BUTT

● Deep Roll Out Tray (DROT) on floor● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable


1DeepRollOutTray

● APC● CCO


B30 FWTB33 FWTB36 FWT 1TD

● Left door with batten● Deep Roll Out Tray (DROT) on floor● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable


1DeepRollOutTray

● APC● CCO


B36 FWT

● Left door with batten● Deep Roll Out Tray (DROT) on floor● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable


1DeepRollOutTray

● APC● CCO


BASE

CAB

INET

S

93


BASE CABINETS: With Deep Roll Out Trays

B30 2TB33 2TB36 2T 1TD

● Deep Roll Out Tray (DROT) on floor in each door opening

● Full depth adjustable shelf in center position● Deep Roll Out Trays are not adjustable


2DeepRollOutTrays

● APC● CCO


B36 2TB39 2TB42 2TB48 2T




2DeepRollOutTrays

● APC● CCO


B45 3T


● Full depth adjustable shelf in center position● Deep Roll Out Trays are not adjustable● Hinged as shown – center door can be reversed in

the field


3DeepRollOutTrays

● APC● CCO


B12 2FWTB15 2FWTB18 2FWTB21 2FWTB24 2FWT

● Two Deep Roll Out Trays (DROT)● Deep Roll Out Trays are not adjustable


2DeepRollOutTrays

● APC● CCO


B24 2FWT BUTTB27 2FWT BUTT

● Two Deep Roll Out Trays (DROT)● Deep Roll Out Trays are not adjustable


2DeepRollOutTrays

● APC● CCO


B30 2FWTB33 2FWTB36 2FWT 1TD

● Left door with batten● Two Deep Roll Out Trays (DROT)● Deep Roll Out Trays are not adjustable


2DeepRollOutTrays

● APC● CCO


BASE

CAB

INET

S94



B36 2FWT

● Left door with batten● Two Deep Roll Out Trays (DROT)● Deep Roll Out Trays are not adjustable


2DeepRollOutTrays

● APC● CCO


B30 4TB33 4TB36 4T 1TD

● Two Deep Roll Out Trays (DROT) in each door opening

● Deep Roll Out Trays are not adjustable


4DeepRollOutTrays

● APC● CCO


B36 4TB39 4TB42 4TB48 4T




4DeepRollOutTrays

● APC● CCO


B45 6T


● Deep Roll Out Trays are not adjustable● Hinged as shown – center door can be reversed in

the field


6DeepRollOutTrays

● APC● CCO


B12 CCFWTB15 CCFWTB18 CCFWTB21 CCFWTB24 CCFWT

● Deep Roll Out Tray features full access CushionClose glides

● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable

BaseCabinet1Door,1Drawer1DeepRollOutTray

withFullAccessCushionCloseGlides

● APC● CCO


B24 CCFWT BUTTB27 CCFWT BUTT

● Deep Roll Out Tray features full access CushionClose glides

● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable


1DeepRollOutTraywithFullAccess

CushionCloseGlides

● APC● CCO


BASE

CAB

INET

S

95



B30 CCFWTB33 CCFWTB36 CCFWT 1TD

● Left door with batten● Deep Roll Out Tray features full access

CushionClose glides● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable

BaseCabinet2Doors,1Drawer,1DeepRollOutTray


● APC● CCO


B36 CCFWT

● Left door with batten● Deep Roll Out Tray features full access

CushionClose glides● Full depth adjustable shelf in center position● Deep Roll Out Tray is not adjustable

BaseCabinet2Doors,2Drawers,1DeepRollOutTray


● APC● CCO


B30 CC2TB33 CC2TB36 CC2T 1TD

● Deep Roll Out Tray featuring full access CushionClose glides on floor in each door opening


BaseCabinet2Doors,1Drawer,2DeepRollOutTrays


● APC● CCO


B36 CC2TB39 CC2TB42 CC2TB48 CC2T



BaseCabinet2Doors,2Drawers,2DeepRollOutTrays


● APC● CCO


B45 CC3T


● Full depth adjustable shelf in center position● Deep Roll Out Trays are not adjustable● Hinged as shown – center door can be reversed

in the field



● APC● CCO


B12 CC2FWTB15 CC2FWTB18 CC2FWTB21 CC2FWTB24 CC2FWT

● Deep Roll Out Trays feature full access CushionClose glides


BaseCabinet1Door,1Drawer,2DeepRollOutTrays


● APC● CCO


BASE

CAB

INET

S96



B24 CC2FWT BUTTB27 CC2FWT BUTT





● APC● CCO


B30 CC2FWTB33 CC2FWTB36 CC2FWT 1TD

● Left door with batten● Deep Roll Out Trays feature full access

CushionClose glides● Deep Roll Out Trays are not adjustable



● APC● CCO


B36 CC2FWT

● Left door with batten● Deep Roll Out Trays feature full access

CushionClose glides● Deep Roll Out Trays are not adjustable



● APC● CCO


B30 CC4TB33 CC4TB36 CC4T 1TD

● Two Deep Roll Out Trays featuring full access CushionClose glides in each door opening




● APC● CCO


B36 CC4TB39 CC4TB42 CC4TB48 CC4T





● APC● CCO


B45 CC6T


● Deep Roll Out Trays are not adjustable● Hinged as shown – center door can be reversed

in the field



● APC● CCO


BASE

CAB

INET

S

97



BaseCabinetswithAccessoriesare341⁄2”highby24”deepandrangefrom12”to36”wide.

CathedraldoorsarenotavailableonBaseCabinetswithAccessories.

SingledoorBaseCabinetswithAccessoriesarehingedleftandcanbereversedinthefield.


Base Cabinets with Accessories

● Roll Out Tray Divider in natural finish solid wood and wood veneer with dovetail (front only) construction, MDF bottom and side-mounted drawer glides

● No shelf● B12 ROTD features two compartments (one partition)● B15 ROTD features three compartments

(two partitions)● Partition(s) are field installed

BaseCabinetwithFactoryInstalledRollOutTrayDivider

B12 ROTDB15 ROTD

● APC● CCO

CFO● FE● PVS

RD

● Plastic Bag Door Storage Unit packaged separately for field installation

● Unit in natural finish solid wood and wood veneer● Full depth adjustable shelf must be field trimmed

to half-depth● Cannot be used with Deep Roll Out Trays● Removable white plastic tray is NOT dishwasher safe


withPlasticBagDoorStorageKit

B15 PBDSUB18 PBDSU

● APC● CCO

CFO● FE● PVS

RD

● Cutting Board Door Rack Kit packaged separately for field installation

● Kit in natural finish solid wood features chrome rails● Full depth adjustable shelf must be field trimmed to

half-depth● Cannot be used with Deep Roll Out Trays● Solid wood cutting board is NOT dishwasher safe● Cutting Board measures 15 15⁄16” x 10 9⁄16” x 1 3⁄16”


withCuttingBoardDoorRackKit

B18 CBDR● APC● CCO

CFO● FE● PVS

RD

B12 CCROTDB15 CCROTD

● Roll Out Tray Divider in natural finish solid wood and wood veneer with dovetail (front only) construction, MDF bottom and full access CushionClose glides

● No shelf● B12 CCROTD features two compartments

(one partition)● B15 CCROTD features three compartments

(two partitions)● Partition(s) are field installed

BaseCabinetwithFactoryInstalledRollOutTrayDivider


● APC● CCO

CFO● FE● PVS

RD

BASE

CAB

INET

S98


BASE CABINETS: With Accessories

● APC● CCO

CFO● FE● IF● PVS

RD● Organizer in natural finish solid wood and wood

veneer with dovetail (front only) construction, MDF bottom and side-mounted drawer glides

● Top shelf measures 6 3⁄16” deep● Middle shelf measures 9 3⁄4” deep

BasePotandPanOrganizerCabinet

2Doors,1Drawer

B24 BUTT BPPOB27 BUTT BPPO


1FactoryInstalledWastebasket

● Features one white plastic 35 quart capacity bin● Wastebasket rests in a natural maple plywood frame● Frame slides on full access glides● Includes bag storage tray at rear● Decorative hardware strongly recommended● CushionClose Glide Option available on drawer only● Tray NOT dishwasher safe● Wastebasketlidmaybeorderedseparately

BWBT15● APC● CCO


RD

● APC● CCO


RD● Left door with batten● Organizer in natural finish solid wood and wood




2Doors,1Drawer

B30 1B BPPOB33 1B BPPOB36 1B 1TD BPPO

● BWBT15-2 features two white plastic 27 quart capacity bins

● BWBT18-2 features two white plastic 35 quart capacity bins

● Wastebaskets rest in a natural maple plywood frame● Frame slides on full access glides● Decorative hardware strongly recommended● CushionClose Glide Option available on drawer only● Wastebasketlidsmaybeorderedseparately

forBWBT18-2


2FactoryInstalledWastebaskets

BWBT15-2BWBT18-2

● APC● CCO


RD

B24 BPPO

● Organizer in natural finish solid wood and wood veneer with dovetail (front only) construction, MDF bottom and side-mounted drawer glides



1Door,1Drawer

● APC● CCO


RD

● Left door with batten● Organizer in natural finish solid wood and wood




2Doors,2Drawers

B36 1B BPPO● APC● CCO


RD

BASE

CAB

INET

S

99



B24 CCBPPO

● Organizer in natural finish solid wood and wood veneer with dovetail (front only) construction, MDF bottom and full access CushionClose glides


BasePotandPanCabinetwithFullAccessCushionCloseOrganizer

● APC● CCO


RD

B24 BUTT CCBPPOB27 BUTT CCBPPO

● Organizer in natural finish solid wood and wood veneer with dovetail (front only) construction, MDF bottom and full access CushionClose glides



● APC● CCO


RD

B30 1B CCBPPOB33 1B CCBPPOB36 1B 1TD CCBPPO


veneer with dovetail (front only) construction, MDF bottom and full access CushionClose glides



● APC● CCO


RD

B36 1B CCBPPO





● APC● CCO


RD

BASE

CAB

INET

S100



● Increase accessibility by placing pots and pans near work surfaces● Roll out unit brings everything into view with one motion● Inverted Frame Cabinet Option extends design flexibility

SuggestedDesignApplicationBaseCabinetwithFactoryInstalled

BasePotandPanOrganizerCabinetwiththeInvertedFrameCabinetOption

● Extend functionality with easily accessible wastebaskets● Easily separate trash from recyclables● Increase design options with the Inverted Frame Cabinet Option

SuggestedDesignApplicationBasewithFactoryInstalled

Wastebasket(s)withtheInvertedFrameCabinetOption

BASE

CAB

INET

S

101



OrderingBaseCabinetswithFactoryInstalledDrawerAccessories:

1. SelectaBaseCabinetconfiguration Example:B152FWT(BaseCabinet

withTwoDeepRollOutTrays)

2. ChooseaFactoryInstalledBasedraweraccessoryfromthelistonthefollowingpage

Example:WoodTieredCutleryDivider(WTCD)

3. Replacetheasterisk(*)withthecodefortheFactoryInstalledBasedraweraccessorytoorderasaFactoryInstalledAccessory

Example:B152FWTWTCD

Base Cabinets with Factory Installed Drawer Organizers

BaseCabinetFactoryInstalledDrawerAccessory

B15 * B18 * B21 * B24 * B24 BUTT *

● APC● CCO

CFO● FE● PVS

RD

BaseCabinetwith1DeepRollOutTrayandFactoryInstalledDrawerAccessory

B15 FWT * B18 FWT * B21 FWT * B24 FWT * B24 FWT BUTT *

● APC● CCO

CFO● FE● PVS

RD

BaseCabinetwith1DeepRollOutTraywithFullAccessCushionCloseGlidesandFactoryInstalledDrawerAccessory

B15 CCFWT * B18 CCFWT * B21 CCFWT * B24 CCFWT * B24 CCFWT BUTT *

● APC● CCO

CFO● FE● PVS

RD

BaseCabinetwith2DeepRollOutTraysandFactoryInstalledDrawerAccessory

B15 2FWT * B18 2FWT * B21 2FWT * B24 2FWT * B24 2FWT BUTT *

● APC● CCO

CFO● FE● PVS

RD

BaseCabinetwith2DeepRollOutTrayswithFullAccessCushionCloseGlidesandFactoryInstalledDrawerAccessory

B15 CC2FWT * B18 CC2FWT * B21 CC2FWT * B24 CC2FWT * B24 CC2FWT BUTT *

● APC● CCO

CFO● FE● PVS

RD

BASE

CAB

INET

S102


BASE CABINETS: With Factory Installed Drawer Organizer

Width Sections 15” 5 18” 5 21” 7 24” 7

MoldedPlasticCutleryDivider•MPCDReplace*withMPCDtocompleteSKU

• Features molded plastic sections with natural finish• Not field trimmable• Dishwasher safe

SpiceDrawerInsert•SDIReplace*withSDItocompleteSKU

• Solid hardwood and plywood in natural finish• Accommodates most spice containers (not included)

Width Sections 15” 3 18” 4 21” 5 24” 5

CutleryDivider•CDReplace*withCDtocompleteSKU

• Solid hardwood and plywood in natural finish

Upper Lower Width Sections Sections15” 5 518” 5 621” 6 724” 7 7

WoodTieredCutleryDivider•WTCDReplace*withWTCDtocompleteSKU

• Double tiered cutlery divider slides independently from drawer• Solid hardwood and plywood in natural finish

ChoppingBlock•CHBReplace*withCHBtocompleteSKU

• 1 1⁄4” solid maple butcher block style chopping block slides independently from drawer• Chopping block must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish

CuttingCenter•CCReplace*withCCtocompleteSKU

• 3⁄4” solid maple butcher block style cutting board slides independently from drawer• Cutting board must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish

KnifeSectionCuttingCenter•KSCCReplace*withKSCCtocompleteSKU

• 3⁄4” solid maple butcher block style cutting board slides independently from drawer• Cutting board must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish• Solid hardwood blade dividers in natural finish with cork pad handle rest

Width Slots 15” 10 18” 13 21” 16 24” 19

KnifeSection•KSReplace*withKStocompleteSKU

• Solid hardwood blade dividers in natural finish with cork pad handle rest

Width Slots 15” 10 18” 13 21” 16 24” 19

BASE

CAB

INET

S

103


BASE CABINETS: With Factory Installed Drawer Organizer

PeninsulaBaseCabinetsare34 1⁄2”highby24”deepandrangefrom12”to42”wide.

CathedraldoorsarenotavailableonPeninsulaBaseCabinets.

SingledoorPeninsulaBaseCabinetsarehingedleftandcanbereversedinthefield.


Peninsula Base Cabinets

PB12PB18PB24

● Full depth adjustable shelf● Drawer accessible on one side only● Panel on opposite side of drawer

PeninsulaBase2Doors,1Drawer

● APC● CCO




PB24 BUTT● APC● CCO




PB30PB36 1TD

● APC● CCO


● Full depth adjustable shelf● Drawers accessible on one side only● PB36 features one panel on opposite side

of drawers● PB42 features two panels on opposite side

of drawers

PeninsulaBase4Doors,2Drawers

PB36PB42

● APC● CCO


BASE

CAB

INET

S104


BASE CABINETS: Peninsula

DrawerBaseCabinetsare341⁄2”highby24”deepandrangefrom12”to36”wide.


Drawer Base Cabinets

DB12DB15DB18DB21

● 1 standard and 2 large drawers

DrawerBaseCabinet3Drawers

DB24DB27DB30DB36 1TD

● APC● CCO● CFO● FE● PVS● RD

DB12 4DWRDB15 4DWRDB18 4DWRDB21 4DWRDB24 4DWR

● 1 large and 3 standard drawers



DB36




BASE

CAB

INET

S

105


BASE CABINETS: Drawer Base

OrderingBaseCabinetswithFactoryInstalledDrawerAccessories:

1. SelectaDrawerBaseCabinetconfiguration

DB15(3DrawerBaseCabinet)

2. ChooseaFactoryInstalledBasedraweraccessoryfromthelistonthefollowingpage

Example:WoodTieredCutleryDivider(WTCD)

3. Replacetheasterisk(*)withthecodefortheFactoryInstalledBasedraweraccessorytoorderasaFactoryInstalledAccessory

Example:DB15WTCD

Drawer Base Cabinets with Factory Installed Drawer

Organizers

3DrawerBaseCabinetwithFactoryInstalledDrawerAccessory

DB15 * DB18 * DB21 * DB24 *

● APC● CCO

CFO● FE● PVS

RD

4DrawerBaseCabinetwithFactoryInstalledDrawerAccessory

DB15 4DWR * DB18 4DWR * DB21 4DWR * DB24 4DWR *

● APC● CCO

CFO● FE● PVS

RD

BASE

CAB

INET

S106


BASE CABINETS: Drawer Base with Factory Installed Drawer Organizer

Width Sections 15” 5 18” 5 21” 7 24” 7

MoldedPlasticCutleryDivider•MPCDReplace*withMPCDtocompleteSKU

• Features molded plastic sections with natural finish• Not field trimmable• Dishwasher safe

SpiceDrawerInsert•SDIReplace*withSDItocompleteSKU

• Solid hardwood and plywood in natural finish• Accommodates most spice containers (not included)

Width Sections 15” 3 18” 4 21” 5 24” 5

CutleryDivider•CDReplace*withCDtocompleteSKU

• Solid hardwood and plywood in natural finish

Upper Lower Width Sections Sections15” 5 518” 5 621” 6 724” 7 7

WoodTieredCutleryDivider•WTCDReplace*withWTCDtocompleteSKU

• Double tiered cutlery divider slides independently from drawer• Solid hardwood and plywood in natural finish

ChoppingBlock•CHBReplace*withCHBtocompleteSKU

• 1 1⁄4” solid maple butcher block style chopping block slides independently from drawer• Chopping block must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish

CuttingCenter•CCReplace*withCCtocompleteSKU

• 3⁄4” solid maple butcher block style cutting board slides independently from drawer• Cutting board must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish

KnifeSectionCuttingCenter•KSCCReplace*withKSCCtocompleteSKU

• 3⁄4” solid maple butcher block style cutting board slides independently from drawer• Cutting board must be removed from cabinet for use• 1 7⁄8” high solid hardwood dovetail drawer in natural finish• Solid hardwood blade dividers in natural finish with cork pad handle rest

Width Slots 15” 10 18” 13 21” 16 24” 19

KnifeSection•KSReplace*withKStocompleteSKU

• Solid hardwood blade dividers in natural finish with cork pad handle rest

Width Slots 15” 10 18” 13 21” 16 24” 19

BASE

CAB

INET

S

107


BASE CABINETS: Drawer Base with Factory Installed Drawer Organizer

Sink/RangeBaseCabinetsare341⁄2”highby24”deepandrangefrom18”to48”wide.

CathedraldoorsarenotavailableonSink/RangeBaseCabinets.

SingledoorSink/RangeBaseCabinetsarehingedleftandcanbereversedinthefield.


Sink/Range Base Cabinets

When placing a Sink/Range Base Cabinet in a design, select a cabinet at least 3” wider than the sink or cooktop to allow for installation clips. Review manufacturer’s specifications for dimensions and adequate clearance requirements.

If a Corner Sink Base Cabinet or Front is selected, remember to place the dishwasher a minimum of 15” from the cabinet to allow for adequate standing space and proper appliance door operation.

● APCCCOCFO

● FE● PVS● RD

● No shelf● Full height back● Subtract 1 1⁄2” from width and depth for available

sink bowl opening● Refertosinkmanufacturer’sspecifications

foradequateclearanceandrequiredinstallationmaterials

SB30 SB33SB36

Sink/RangeBase2Doors,1Panel

SB18SB21SB24




Sink/RangeBase1Door,1Panel

● APCCCOCFO

● FE● PVS● RD

SB24 BUTTSB27 BUTT





● APCCCOCFO

● FE● PVS● RD

● Left door with batten● No shelf● Full height back● Subtract 1 1⁄2” from width and depth for available sink bowl opening● Refertosinkmanufacturer’sspecifications


SB30 1BSB33 1BSB36 1B


● APCCCOCFO

● FE● PVS● RD

BASE

CAB

INET

S108


BASE CABINETS: Sink/Range

● APCCCOCFO

● FE● PVS● RD

SB39SB42SB48




Sink/RangeBase2Doors,2Panels

● APCCCOCFO

● FE● PVS● RD

DSB30 1BDSB36 1B

● Left door with batten● Accommodates most farm sinks● Stiles at apron are 3 1⁄8” wide and trimmable● A cutout exists in the door area where the 3 1⁄8” stiles are routed to 1 5⁄8”● Refertosinkmanufacturer’sspecificationsforadequateclearanceandrequired

installationmaterials

DeepSinkBaseCabinet

A A C CCut Out Min. Max. B Max. FOL Max. POLDSB30 1B 23 3⁄4” 27 15⁄16” 2 7⁄8” 9 7⁄8” 11 1⁄4”DSB36 1B 29 3⁄4” 33 15⁄16” 2 7⁄8” 9 7⁄8” 11 1⁄4”

SB45


sink bowl opening● Hinged as shown – can be reversed in the field● Refertosinkmanufacturer’sspecifications


Sink/RangeBase3Doors,3Panels

● APCCCOCFO

● FE● PVS● RD

CornerSinkBase

CSB36

● No shelf● Sides are finished● Cabinet requires a minimum of 34” to fit through doorway● Additional space recommended if appliance is installed on either side of this cabinet for proper appliance

door operation● Cabinet features solid top which must be field cut for sink installation as per manufacturer's specifications● Maximumsinkwidthis25 3⁄4”ifcutoutis4”backfromfaceoffrontframe● Refertosinkmanufacturer’sspecificationsforadequateclearanceandrequired


● APCCCOCFO

● FE● PVS

RD

BASE

CAB

INET

S

109



CornerSinkFront

CSF36CSF42

● Corner Sink Front not trimmable● Vertical edges of frame are mitered to attach to

adjacent cabinet frames● Orderfloorsandreturnsseparately

(trimmingmayberequired)–refertoPanelSectionforavailability

A BCSF36 35 31⁄32” 16 15⁄16”CSF42 42 11⁄32” 25 15⁄16”

SF45

● Sink/Range Front not trimmable● Hinged as shown – can be reversed in the field● Orderfloorsandreturnsseparately


Sink/RangeFront3Doors,3Panels

SF39SF42SF48

● Sink/Range Front not trimmable● Orderfloorsandreturnsseparately


Sink/RangeFront2Doors,2Panels

SF30SF33SF36



Sink/RangeFront2Doors,1Panel



Sink/RangeFront1Door,1Panel

SF12SF15SF18SF21SF24

SF24 BUTTSF27 BUTT



Sink/RangeFront2Doors,1Panel

BASE

CAB

INET

S110



SinkBaseCabinetswithFactoryInstalledAccessoriesfeatureTilt-OutTrayswithHiddenHinges.

SinkBaseCabinetswithFactoryInstalledAccessoriesare341⁄2”highby24”deepandrangefrom18”to48”wide.

CathedraldoorsarenotavailableonSinkBaseCabinetswithFactoryInstalledAccessories.

SingledoorSinkBaseCabinetswithFactoryInstalledAccessoriesarehingedleftandcanbereversedinthefield.


Sink Base Cabinetswith Factory Installed

Accessories

● APCCCOCFO

● FE● PVS● RD

StainlessSB30 1B STO

PlasticSB30 1B TO

● No shelf● Left door with batten● Full height back● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for

available sink bowl opening● Tilt-Out Trays are NOT dishwasher safe● Refertosinkmanufacturer’sspecifications


SinkBase2Doors,1Panelwith

FactoryInstalledTilt-OutTray

● APCCCOCFO

● FE● PVS● RD

StainlessSB24 BUTT STOSB27 BUTT STO

PlasticSB24 BUTT TOSB27 BUTT TO

● No shelf● Full height back● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for





● APCCCOCFO

● FE● PVS● RD

StainlessSB30 STO

PlasticSB30 TO






StainlessSB18 STOSB21 STOSB24 STO

PlasticSB18 TOSB21 TOSB24 TO




SinkBase1Door,1Panelwith


● APCCCOCFO

● FE● PVS● RD

BASE

CAB

INET

S

111


BASE CABINETS: Sink with Factory Installed Accessories

StainlessSB33 STOSB36 STO

PlasticSB33 TOSB36 TO





FactoryInstalledTilt-OutTrays

● APCCCOCFO

● FE● PVS● RD

StainlessSB39 STOSB42 STOSB48 STO

PlasticSB39 TOSB42 TOSB48 TO




SinkBase2Doors,2Panelswith


● APCCCOCFO

● FE● PVS● RD

StainlessSB33 1B STOSB36 1B STO

PlasticSB33 1B TOSB36 1B TO

● No shelf● Left door with batten● Full height back● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for





● APCCCOCFO

● FE● PVS● RD

BASE

CAB

INET

S112



SBMS30 1B STO

● Left door with batten ● Full height back ● Features factory installed Sink Base Door Storage

Unit (SBDSU15) on left door, Plastic Bag Door Storage Unit (PBDSU15) on right door and one Stainless Tilt-Out Tray (STO TRAY 22)

● Sink Base Multi-Storage Shelf (SBMSS) shipped separately for field installation left or right

● Sink Base Multi-Storage Shelf measures 8 3⁄16” wide x 8” high x 17 1⁄2” deep

● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for available sink bowl opening

● Tilt-Out Tray and door storage unit trays are NOT dishwasher safe

● Refertosinkmanufacturer’sspecificationsforadequateclearanceandrequiredinstallationmaterials

30”SinkBaseMulti-StorageCabinet

● APCCCOCFO

● FE● PVS

RD

SBMS36 1B STO

● Left door with batten● Full height back● Features factory installed Sink Base Door Storage

Unit (SBDSU18) on left door, Plastic Bag Door Storage Unit (PBDSU18) on right door and

two Stainless Tilt-Out Trays (STO TRAY 11)● Sink Base Multi-Storage Shelf (SBMSS) shipped

separately for field installation left or right● Sink Base Multi-Storage Shelf measures

8 3⁄16” wide x 8” high x 17 1⁄2” deep● Subtract 1 1⁄2” from width and 3 3⁄4” from depth for

available sink bowl opening● Tilt-Out Trays and door storage unit trays are NOT

dishwasher safe● Refertosinkmanufacturer’sspecifications


36”SinkBaseMulti-StorageCabinet

● APCCCOCFO

● FE● PVS

RD

BASE

CAB

INET

S

113



BlindCornerBase1Door,1Drawer

BlindCornerBaseCabinetsare34 1⁄2”highby24”deep.Thevisiblewidthofthesecabinetsrangesfrom13 3⁄8”to28”wide.

CathedralDoorsarenotavailableonBlindCornerBaseCabinets.


Blind Corner Base Cabinets

When a Blind Corner Base Cabinet is used in a design, remember to include the appropriate filler. For a finished, decorative look add an Overlay Filler (Full Overlay door styles) to Universal Fillers or Decorative Blocks to a Fluted Beaded Filler.

BLB36/39BLB39/42BLB42/45BLB45/48BLB48/51

● Half-depth adjustable shelf● Blind base door and drawer are installed in the left section● Refer to the chart on next page for installation specifications● Includes 1⁄8” panel to cover blind opening (field trim and install)● Dooranddrawercanbereversedinthefieldasblindsectionsareidentical● MustorderUniversalFillerseparately

BlindCornerBaseCabinetDimensions


Cut Out A B C

BLB36/39 27” 8 3⁄4” 6 1⁄4”BLB39/42 33” 11 3⁄4” 6 1⁄4”BLB42/45 39” 14 3⁄4” 6 1⁄4”BLB45/48 45” 17 3⁄4” 6 1⁄4”

Cut Out A B C D

BLB48/51 48” 17 3⁄4” 6” 9 1⁄4”

BASE

CAB

INET

S114


BASE CABINETS: Blind Corner

FullOverlay(FOL)DoorStylesFull Overlay door styles require decorative hardware, which has been calculated into dimensions.*Dimension requirements do not include optional Overlay Fillers – add 7⁄8” if Overlay Fillers will be used, except for BLB48/51 add 1⁄8”.

Cabinet

ActualCabinet Width

DoorOpening Door


Minimum Space*

Maximum Pull

Maximum Space

Minimum Space*

Maximum Space

BLB36/39 27” 8 3⁄4” DR1224 38 1⁄4” 1 3⁄4” 40” 14 1⁄4” 16”BLB39/42 33” 11 3⁄4” DR1524 41 1⁄4” 1 3⁄4” 43” 17 1⁄4” 19”

BLB42/45 39” 14 3⁄4” DR1824 44 1⁄4” 1 3⁄4” 46” 20 1⁄4” 22”

BLB45/48 45” 17 3⁄4” DR2124 47 1⁄4” 1 3⁄4” 49” 23 1⁄4” 25”BLB48/51 48” 17 3⁄4” DR2124 48” 4” 52” 24” 28”

PartialOverlay(POL)DoorStylesWall Space A requirements include optional decorative hardware clearance. 1 1⁄4” may be deducted if decorative hardware is not used.

Cabinet

ActualCabinet Width

DoorOpening Door


Minimum Space

Maximum Pull

Maximum Space

Minimum Space

Maximum Space

BLB36/39 27” 8 3⁄4” DR1224 37 3⁄8” 2 5⁄8” 40” 13 3⁄8” 16”BLB39/42 33” 11 3⁄4” DR1524 40 3⁄8” 2 5⁄8” 43” 16 3⁄8” 19”

BLB42/45 39” 14 3⁄4” DR1824 43 3⁄8” 2 5⁄8” 46” 19 3⁄8” 22”

BLB45/48 45” 17 3⁄4” DR2124 46 3⁄8” 2 5⁄8” 49” 22 3⁄8” 25”BLB48/51 48” 17 3⁄4” DR2124 48” 4” 52” 24” 28”

BlindCornerBaseInstallationChart

BASE

CAB

INET

S

115


BASE CABINETS: Blind Corner

Blind Peninsula Corner Base Cabinets

BlindPeninsulaCornerBaseCabinetsare341⁄2”highby24”deep.

CathedraldoorsarenotavailableonBlindPeninsulaCornerBaseCabinets.


BlindPeninsulaCornerBaseInstallationChart

BlindPeninsulaCornerBase

● Full depth adjustable shelf● Can be installed left or right● Universal fillers are recommended for use

between PBC24 and wall and adjoining base cabinet or appliance for hardware clearance and proper door operation

● Refer to the chart below for installation specifications

● Roll out accessories are not recommended● MustorderUniversalFillersseparately

PBC24PBC24 BUTT

● APC● CCO


FullOverlay(FOL)DoorStylesFull Overlay door styles require decorative hardware, which has been calculated into dimensions.*Must use these dimensions if optional Overlay Fillers will be used.

Cabinet

ActualCabinetWidth

DoorOpening Door(s)


Min.Space

Max.Pull

Max.Space*

Min.Space

Max.Space* Min. Max.*

PBC24 24” 20 3⁄4” DR2424 26 1⁄4” 3⁄4” 27” 2 1⁄4” 3” 2 1⁄4” 3”

PBC24 BUTT 24” 20 3⁄4” DR1224 BUTT (2) 26 1⁄4” 3⁄4” 27” 2 1⁄4” 3” 2 1⁄4” 3”


Cabinet

ActualCabinetWidth

DoorOpening Door(s)


Min.Space

Max.Pull

Max.Space

Min.Space

Max.Space Min. Max.

PBC24 24” 20 3⁄4” DR2424 25 3⁄8” 1 5⁄8” 27” 1 3⁄8” 3” 1 3⁄8” 3”

PBC24 BUTT 24” 20 3⁄4” DR1224 BUTT (2) 25 3⁄8” 1 5⁄8” 27” 1 3⁄8” 3” 1 3⁄8” 3”

BASE

CAB

INET

S116


BASE CABINETS: Blind Peninsula Corner

● APCCCOCFO

● FE● PVS

RD

BER33BER36

● One adjustable half-depth shelf (non-removable)● Partial Overlay door styles are hinged left and may

be reversed in the field● FullOverlaydoorstylesmustbeordered

hingedleftorright● BER33 features two solid recessed panel doors for

Savannah door styles● Sides are finished● Doors open 170 degrees● Cabinet requires a minimum of 34” to fit through

doorway● Additional space recommended if appliance is

installed on the hinge side of this cabinet for proper door operation

BaseEasyReach

CathedraldoorsarenotavailableonCornerBaseCabinets.


Cabinetrequiresaminimumof34”tofitthroughdoorway.

Corner Base Cabinets

To ensure proper door function on a Corner Base Cabinet, a 3” Filler or Dishwasher Return is recommended for placement between the cabinet and any appliance or other design element deeper than 24”.

In addition the Corner Base Cabinet should be hinged opposite (e.g., if a range is placed to the right of a Corner Base, the cabinet should be hinged left).

BER3336RBER3336LBER3633RBER3633L

● One adjustable half-depth shelf (non-removable)● Alldoorstylesmustbeorderedhingedleft

orright● Savannah door style features one solid recessed

panel door (33” side) and one solid raised panel door (36” side)

● Sides are finished● Doors open 170 degrees● Cabinet requires a minimum of 34” to fit through



● Front frame opening dimension A =12 11⁄16”

AsymmetricalBaseEasyReach

● APCCCOCFO

● FE● PVS

RD

Front Frame Opening

A B CBER33 33” 20 1⁄2” 10 7⁄16”BER36 36” 23 1⁄2” 14 5⁄8”

NOTE:Forfrontviewillustration,referto Designer’sChoice20-20catalog.

BASE

CAB

INET

S

117


BASE CABINETS: Corner

BSS3336L WD BSS3336R WD

BSS3633R WDBSS3633L WD




are 28” in diameter● Alldoorstylesmustbeorderedhingedleft

orright● Savannah door style features one solid recessed

panel door (33” side) and one solid raised panel door (36” side)



installed on the hinge side of this cabinet for proper door operation● Front frame opening dimension A =12 11⁄16”

AsymmetricalBaseSuperSusanwithWoodSpinUnits


● APCCCOCFO

● FE● PVS

RD


adjustable shelf● Natural finish wood spin units feature 1” lip● Wood spin diameter is 28” for BSS33 and 32”

for BSS36● Partial Overlay door styles are hinged left and may

be reversed in the field● FullOverlaydoorstylesmustbeordered

hingedleftorright● BSS33 WD features two solid recessed panel

doors for Savannah door style● Sides are finished● Doors open 170 degrees● Cabinet requires a minimum of 34” to fit through



BaseSuperSusanwithWoodSpinUnits

BSS33 WDBSS36 WD

● APCCCOCFO

● FE● PVS

RD

Front Frame Opening

A B CBSS33 WD 33” 20 1⁄2” 10 7⁄16”BSS36 WD 36” 23 1⁄2” 14 5⁄8”

● BSS33 features two 28” diameter white spin shelves with pole (top shelf adjustable)

● BSS36 features two 32” diameter white spin shelves with pole (top shelf adjustable)

● Partial Overlay door styles are hinged left and may be reversed in the field

● FullOverlaydoorstylesmustbeorderedhingedleftorright

● BSS33 features two solid recessed panel doors for Savannah door styles




BaseSuperSusanwithPlasticSpinUnits

BSS33 BSS36

● APCCCOCFO

● FE● PVS

RD

Front Frame Opening

A B CBSS33 33” 20 1⁄2” 10 7⁄16”BSS36 36” 23 1⁄2” 14 5⁄8”


BASE

CAB

INET

S118



● APCCCOCFO

● FE● PVS

RD

BSS3336RBSS3336LBSS3633RBSS3633L

● Features two 28” diameter white spin shelves with pole (top shelf adjustable)

● Alldoorstylesmustbeorderedhingedleftorright

● Savannah door style features one solid recessed panel door (33” side) and one solid raised panel door (36” side)




● Front frame opening dimension A =12 11⁄16”

AsymmetricalBaseSuperSusanwithPlasticSpinUnits

CornerBasewithWoodSpinUnits

CBS36 WD



are 28” in diameter● Sides are finished● Doors open 170 degrees● Cabinet requires a minimum of 34” to fit through


installed on the hinge side of this cabinet for proper door operation● Cabinet features solid top

● APCCCOCFO

● FE● PVS

RD

CornerBasewithPlasticSpinUnits

CBS36

● Features two 28” diameter full round white spin shelves with pole (top shelf adjustable)

● Sides are finished● Cabinet requires a minimum of 34” to fit through



● Cabinet features solid top

● APCCCOCFO

● FE● PVS

RD


BASE

CAB

INET

S

119



CornerSinkBase

CSB36

● No shelf● Sides are finished● Cabinet requires a minimum of 34” to fit through


installed on either side of this cabinet for proper appliance door operation

● Cabinet features solid top which must be field cut for sink installation as per manufacturer’s specifications

● Maximumsinkwidthis25 3⁄4”ifcutoutis4”backfromfaceoffrontframe

● Refertosinkmanufacturer’sspecificationsforadequateclearanceandrequiredinstallationmaterials

CornerSinkFront

CSF36CSF42

● Corner Sink Front not trimmable● Vertical edges of frame are mitered to attach to

adjacent cabinet frames● Orderfloorsandreturnsseparately(trimming

mayberequired)–refertoPanelsectionforavailability

A BCSF36 35 31⁄32” 16 15⁄16”CSF42 42 11⁄32” 25 15⁄16”

CAR36CAR36 WD

● CAR36 features two 24” diameter white spin shelves with pole (top shelf adjustable)

● CAR36 WD features two 24” diameter natural finish solid hardwood spin shelves with pole (top shelf adjustable)

● Partial Overlay door styles are hinged left and may be reversed in the field

● FullOverlaydoorstylesmustbeorderedhingedleftorright

● Sides are unfinished● Doors open 170 degrees● If unit has an exposed side, order end panel separately● Additional support for countertop in back is

necessary● Additional space recommended if appliance is


● Front frame opening dimension A =14 5⁄8”● Unitmustbepulledtoinstallina

36”x36”space

CornerBaseCarousel

● APCCCOCFO

● FE● PVS

RD

BASE

CAB

INET

S120



Specialty Base Cabinet


BSDC6

● All door styles feature veneered engineered wood with exterior only finished

● Five individual full depth drawers● Flush sides with no face frame or 1⁄4” reveals● All wood drawer body with dovetail construction● Wood door styles feature matching wood knobs● Maple Linen and white Thermo Foil door styles

feature white porcelain knobs

BaseSpiceDrawerCabinet

BWRC6

● All door styles feature veneered engineered wood finished to match cabinet exterior

● Interior finished to match cabinet exterior ● Accommodates five wine bottles● 3⁄4” thick sides and shelves● Flush sides with no face frame or 1⁄4” reveals● Cannot be retrofitted with Base Spice Drawer

Cabinet drawers

BaseWineRackCabinet

ShelfEndPeninsulaBase

SEB


● Interior finished to match cabinet exterior● 3⁄4” shelves● Distance between shelves is 9 3⁄16”● 7⁄8” screw recommended from inside of adjacent

cabinet for installation● Toe kick is removable – invert unit for right or left● Cabinetdimensionsareforreference

purposesONLY–countertopmustbemeasuredandfabricatedaftercabinetinstallation

ShelfEndBase

SEPB


● Interior finished to match cabinet exterior● 3⁄4” shelves● Distance between shelves is 9 3⁄16”● 7⁄8” screw recommended from inside of adjacent

cabinet for installation● Cabinetdimensionsareforreferencepurposes

ONLY–countertopmustbemeasuredandfabricatedaftercabinetinstallation

BASE

CAB

INET

S

121


BASE CABINETS: Specialty

BEA12LBEA12R

● False panel aligns with adjacent drawer● One adjustable shelf● Right hand shown● Reduced depth minimum is 18”● Cabinetdimensionsareforreferencepurposes

ONLY–countertopmustbemeasuredandfabricatedaftercabinetinstallation

BaseEndAngle1Door,1Panel

BEA12L FHBEA12R FH

● One adjustable shelf● Right hand shown● Reduced depth minimum is 18”● Cabinetdimensionsareforreference


BaseEndAngle1Door

● APCCCOCFO

● FE● PVS● RD

BOCU27BOCU30BOCU33

● Designed for mounting single oven below countertop● 3” top rail is field removable and field trimmable● 3 1⁄8” stiles● Will accommodate certain cooktops (in conjunction with undercounter oven) or drop-in ranges● Mostovensrequireatoprailofvaryingheightstocreateafinishedlookandtoallowforthe

ovendoortoclearthecountertopwhenopened● Refertoappliancemanufacturer’sspecificationsforadequateclearancesandrequired


BaseOvenCabinetUniversal

A A B BCut Out Min. Max. Min. Max.*BOCU27 20 3⁄4” 24 15⁄16” 18 1⁄4” 29”BOCU30 23 3⁄4” 27 15⁄16” 18 1⁄4” 29”BOCU33 26 3⁄4” 30 15⁄16” 18 1⁄4” 29”

*Includes removal of top rail

● APCCCOCFO

● FE● PVS● RD

BEA24

● False panels align with adjacent drawer● Requires 24” x 24” space● One adjustable shelf● Cabinetdimensionsareforreference


BaseEndAngle2Doors,2Panels

BMC24BMC27BMC30

● Microwave opening finished to match cabinet exterior

● Designed to accommodate countertop style microwave

● Features two standard depth drawers● Accent Molding recommended – order separately● Refertoappliancemanufacturer’s


BaseMicrowaveCabinet

ABMC24 20 3⁄4”BMC27 23 3⁄4”BMC30 26 3⁄4”

● APC● CCO


● APCCCOCFO

● FE● PVS● RD

● APCCCOCFOFE

● PVSRD

BASE

CAB

INET

S122


BASE CABINETS: Specialty

Base Cabinet Accessories

CCK15CCK18CCK21CCK24

● Available as Factory Installed for all door styles ● KitnotavailableforSavannahandTownsend

doorstyles● Field installed accessory replaces existing drawer box● Glides are not included: reuse existing drawer glides● 1 7⁄8” high solid hardwood dovetail drawer in

natural finish● 3⁄4” solid maple butcher block style cutting board

slides independently from drawer● Can be installed in cabinets with single drawer or

side-by-side drawer configurations● Cutting board must be removed from cabinet

for cutting● Cutting board is NOT dishwasher safe● Not sized to fit reduced depth cabinets

CuttingCenterKit

CHBK15CHBK18CHBK21CHBK24

● Available as Factory Installed for all door styles● KitnotavailableforSavannahandTownsend


natural finish● 1 1⁄4” solid maple butcher block style chopping

block slides independently from drawer● Can be installed in cabinets with single drawer or

side-by-side drawer configurations● Chopping block must be removed from cabinet

for cutting● Chopping block is NOT dishwasher safe● Not sized to fit reduced depth cabinets

ChoppingBlockKit

BASE

CAB

INET

S

123


BASE CABINETS: Accessories

KSCCK15KSCCK18KSCCK21KSCCK24

● Available as Factory Installed for all door styles● KitnotavailableforSavannahandTownsend


natural finish with knife section● Solid hardwood blade dividers in natural finish with

cork pad handle rest● 3⁄4” solid maple butcher block style cutting board

slides independently from drawer● Can be installed in cabinets with single drawer or

side-by-side drawer configurations● Cutting board must be removed from cabinet for

cutting● Cutting board is NOT dishwasher safe● Not sized to fit reduced depth cabinets

KnifeSectionCuttingCenterKit

Number of SlotsKSCCK15 10KSCCK18 13KSCCK21 16KSCCK24 19

WTCDK15WTCDK18WTCDK21WTCDK24

● Field installed accessory replaces existing drawer box● Glides are not included: reuse existing drawer glides● Solid hardwood and plywood in natural finish● Double tiered cutlery divider slides independently

from drawer● Can be installed in cabinets with single drawer or

side-by-side drawer configurations● Not sized to fit reduced depth cabinets

WoodTieredCutleryDividerKit

Upper Lower Sections SectionsWTCDK15 5 5WTCDK18 5 6WTCDK21 6 7WTCDK24 7 7

MoldedPlasticCutleryDividerKit

Number A of SectionsMPCDK15 10 1⁄8” 5MPCDK18 13 1⁄8” 5MPCDK21 16 1⁄8” 7MPCDK24 19 1⁄8” 7

MPCDK15MPCDK18MPCDK21MPCDK24

● Available as Factory Installed for all door styles● Field installed accessory● Features molded plastic sections with natural finish● Not field trimmable● Dishwasher safe

BASE

CAB

INET

S124



Number of SlotsKSK15 10KSK18 13KSK21 16KSK24 19

TD3

● Field installation accessory● Chrome finish● For use in any 24” deep cabinet or reduced depth

cabinet to RD-14”● Mounting hardware included

CabinetTrayDivider

CLS45F

● Field installation accessory● One 21⁄2” high chrome wire shelf per unit● For use with BLB45/48 or BLB48/51● More than one unit can be installed● Order units individually● 34” long x 16” deep from center● Attaches to back of face frame● Not sized to fit reduced depth cabinets

CornerLazySusan

BFP3

● Mustbeinstalledbetweentwobasecabinetsbehindthefaceframesin3”offloorspace

● Cannot be installed next to appliances, cabinets constructed with flush ends (e.g., Base Spice Drawer Cabinet), or cabinets with the Furniture Ends Option

● No side panels or toe kick● Filler shipped unattached for field installation● An overlay filler is recommended for Full Overlay

door styles (order separately)● Features full access ball bearing glides● One fixed and three adjustable 1 5⁄8” wide wood

shelves with chrome rails● Decorative hardware strongly recommended

BaseFillerPullOut

SpiceDrawerInsertKit

SDIK15SDIK18SDIK21SDIK24

● Field installation accessory● Solid hardwood and plywood in natural finish● Accommodates most spice containers

(not included)● Not sized to fit reduced depth cabinets

KnifeSectionKit

KSK15KSK18KSK21KSK24

● Field installation accessory● Solid hardwood blade dividers in natural finish● Cork pad handle rest● Not sized to fit reduced depth cabinets

CutleryDividerKit

Number of SectionsCDK15 3CDK18 4CDK21 5CDK24 5

CDK15CDK18CDK21CDK24

● Field installation accessory● Solid hardwood and plywood in natural finish● Not sized to fit reduced depth cabinets BA

SE C

ABIN

ETS

125



ADROT12 7 3⁄4”DROT15 10 3⁄4”DROT16 12 1⁄4”DROT18 13 3⁄4”DROT19 15 1⁄4”DROT21 16 3⁄4”DROT24 19 3⁄4”DROT27 22 3⁄4”DROT30 25 3⁄4”DROT33 28 3⁄4”DROT36 31 3⁄4”

DROT12DROT15DROT16DROT18DROT19DROT21DROT24

● Field installation accessory● Natural finish dovetail drawer with MDF bottom and

side-mounted drawer glides● Includes tray, all glide hardware and installation

instructions● DROT drill template is required for all double door

cabinets that have a fixed center stile – contact Customer Service for drill template

DeepRollOutTrayKit

DROT27DROT30DROT33DROT36

● RD

ROTDK12ROTDK15

● Field installation accessory● Natural finish solid wood and wood veneer with

dovetail (front only) construction, MDF bottom and side-mounted drawer glides

● ROTDK12 features two compartments (one partition)● ROTDK15 features three compartments

(two partitions)● Partitions(s) are field installed ● Not sized to fit reduced depth cabinets

RollOutTrayDividerKit

A Cabinet SizeROTDK12 7 3⁄4” 12”ROTDK15 10 3⁄4” 15”

ADROTCC12 7 3⁄4”DROTCC15 10 3⁄4”DROTCC16 12 1⁄4”DROTCC18 13 3⁄4”DROTCC19 15 1⁄4”DROTCC21 16 3⁄4”DROTCC24 19 3⁄4”DROTCC27 22 3⁄4”DROTCC30 25 3⁄4”DROTCC33 28 3⁄4”DROTCC36 31 3⁄4”


full access CushionClose glides● Includes tray, all glide hardware and installation

instructions● DROTCC drill template is required for all double door

cabinets with a fixed center stile – contact Customer Service for drill template

DeepRollOutTrayKitwithFullAccessCushionCloseGlides

● RDDROTCC12DROTCC15DROTCC16DROTCC18DROTCC19DROTCC21DROTCC24

DROTCC27DROTCC30DROTCC33DROTCC36

ROTDKCC12ROTDKCC15

● Field installation accessory● Natural finish solid wood and wood veneer with

dovetail (front only) construction, MDF bottom and full access CushionClose glides

● ROTDKCC12 features two compartments (one partition)

● ROTDKCC15 features three compartments (two partitions)

● Partitions are field installed ● Not sized to fit reduced depth cabinets

RollOutTrayDividerKitwithFullAccessCushionCloseGlides

A Cabinet SizeROTDKCC12 7 3⁄4” 12”ROTDKCC15 10 3⁄4” 15”

BASE

CAB

INET

S126



BPPOK24BPPOK27BPPOK30BPPOK33BPPOK36

● Field installation accessory● Organizer in natural finish solid wood and wood


● Top shelf measures 6 3⁄16” deep● Middle shelf measures 9 3⁄4” deep● Not sized to fit reduced depth cabinets

BasePot&PanOrganizerKit

Base Oven A Cabinet Size Cabinet SizeBPPOK24 19 3⁄4” 24” 27”BPPOK27 22 3⁄4” 27” 30”BPPOK30 25 3⁄4” 30” 33”BPPOK33 28 3⁄4” 33” —BPPOK36 31 3⁄4” 36” —

STB

● Field installation accessory● Two chrome finish towel bars● Mounts to cabinet side panel● Pulls out 7” for easy access● Sized for reduced depth cabinets to RD-15”

SlidingTowelBar

CBDRK18

● Field installation accessory● Natural finish solid wood with chrome rails● Cannot be used with Deep Roll Out Trays● Full depth shelf must be field trimmed to half-depth● Solid wood cutting board is NOT dishwasher safe● Cutting board measures 15 15⁄16” x 10 9⁄16” x 1 3⁄16”● CBDRK18 mounts to 18” wide base door

CuttingBoardDoorRackKit

BPPOKCC24BPPOKCC27BPPOKCC30BPPOKCC33BPPOKCC36

● Field installation accessory● Organizer in natural finish solid wood and wood


● Top shelf measures 6 3⁄16” deep● Middle shelf measures 9 3⁄4” deep● Not sized to fit reduced depth cabinets

BasePot&PanOrganizerKitwithFullAccessCushionCloseGlides

Base Oven A Cabinet Size Cabinet SizeBPPOKCC24 19 3⁄4” 24” 27”BPPOKCC27 22 3⁄4” 27” 30”BPPOKCC30 25 3⁄4” 30” 33”BPPOKCC33 28 3⁄4” 33” —BPPOKCC36 31 3⁄4” 36” —

BASE

CAB

INET

S

127



WBU15

● Field installation accessory● Features one white 35 quart plastic bin, chrome

wire rack and full access glides● Mounts in B15 (11 3⁄4”) or wider cabinet opening● Unit measures 10 5⁄8” W x 19 1⁄4” H x 22” D● Not sized to fit reduced depth cabinets● Wastebasketlidmaybeorderedseparately

WastebasketUnit

BR2B15

● Field installation accessory● Features two white 27 quart plastic bins, chrome

wire rack and full access glides● Mounts in B18 (14 3⁄4”) or wider cabinet opening● Unit measures 11 5⁄8” W x 19 1⁄8” H x 22 3⁄4” D ● Not sized to fit reduced depth cabinets

BaseRecyclingKit

PBDSU15PBDSU18

● Field installation accessory● Natural finish solid wood and wood veneer● Cannot be used with Deep Roll Out Trays● Full depth shelf must be field trimmed to half-depth● Removable white plastic tray is NOT dishwasher safe● PBDSU15 mounts to 15” wide base door● PBDSU18 mounts to 18” wide base door

PlasticBagDoorStorageUnit

A BPBDSU15 9” 10 1⁄2”PBDSU18 10 1⁄2” 13 1⁄2”

SBMSS

● Field installation accessory● 3⁄4” veneered plywood with natural finish● Invert for left or right installation

SinkBaseMulti-StorageShelf

SBDSU15SBDSU18

● Field installation accessory● Natural finish solid wood● Two fixed shelves● Cannot be used with Deep Roll Out Trays● Full depth shelf must be field trimmed to half-depth● Removable white plastic tray is NOT dishwasher safe● SBDSU15 mounts to 15” wide base door● SBDSU18 mounts to 18” wide base door

SinkBaseDoorStorageUnit

A BSBDSU15 9” 10 1⁄2”SBDSU18 10 1⁄2” 13 1⁄2”

WBL35G WBL35W

● Fits 35 quart plastic bin● Available in green plastic (WBL35G) or white

plastic (WBL35W)● Order units individually● Lid holds can liner in place

WastebasketLid

BASE

CAB

INET

S128



● Field installation accessory● Not sized to fit reduced depth cabinets● Tilt-Out Trays and door storage unit trays

are NOT dishwasher safe

SinkBaseMulti-StorageKit

SBMS30 KITSBMS36 KIT

● SBMS30 KIT for 30” sink base only and features: • 15” Sink Base Door Storage Unit (SBDSU15) • 15” Plastic Bag Door Storage Unit (PBDSU15) • Sink Base Multi-Storage Shelf (SBMSS) • One Stainless Tilt-Out Tray Kit (STO TRAY 22)

● SBMS36 KIT for 36” sink base only and features: • 18” Sink Base Door Storage Unit (SBDSU18) • 18” Plastic Bag Door Storage Unit (PBDSU18) • Sink Base Multi-Storage Shelf (SBMSS) • Two Stainless Tilt-Out Tray Kits (STO TRAY 11)

HSK

● Field installation accessory● Available for White Thermo Foil door styles only● Recommended for use as a heat shield for all

White Thermo Foil door styles● Protects doors and drawer fronts from adjacent

heat source (built-in ovens, under counter ovens, drop-in or free-standing ranges)

● Kit features: Two white 1⁄16” metal heat shields One strip of wood QM8 WD molding shield

(not required for Base installation)

HeatShieldKit

BASE

CAB

INET

S

129



BASE

CAB

INET

S130


BASE CABINETS: Notes

Dimensions Width Height Depth 12” to 36” 281⁄2” to 96” 12” to 24” (Reduced Depth optional on select cabinets)

SKU Coding

DDO 18 21 Cabinet Type width depth (e.g., DDO= in inches in inches Desk Door Cabinet)


APC. . . . . . . . . . . . . . . . . .All Plywood ConstructionCCO . . . . . . . . . . . . . . . . . . . . . CushionClose GlideCFO. . . . . . . . . . . . . . . . . . . . . . .Cabinet Front OnlyFE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture EndsID . . . . . . . . . . Increased Depth (Bookshelves Only)PVS . . . . . . . . . . . . . . . . . . Plywood Veneered SidesRD. . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth

Desk & Office Cabinets

DES

K &

OFF

ICE

CABI

NET

S

131

DDO1221DDO1521DDO1821DDO2121

● Natural finish dovetail drawer with MDF bottom and 3⁄4 access side-mounted drawer glides

● One full depth adjustable shelf● May be accessorized with one Deep Roll Out Tray

(DROT)● Recommend mounting Deep Roll Out Tray on

cabinet floor

DeskDoorCabinet1Door,1Drawer

21”Deep

DDO2421 BUTT




cabinet floor

DeskDoorCabinet2Doors,1Drawer

21”Deep

DeskBaseCabinetsare12”to24”wide,28 1⁄2”highand20 3⁄4”or24”deep.

CathedraldoorsarenotavailableonDeskBaseCabinets.

SingledoorDeskBaseCabinetsarehingedleftandcanbereversedinthefield.


Desk Cabinets

FDB1821

● Two-tiered file drawer system● Will accept letter or legal size hanging files

FileDrawerBaseCabinet21”Deep

● APCCCOCFO

● FE● PVS

RD

DWBT1821

● Full height door● Features one white plastic 35 quart capacity bin● Wastebasket rests in a natural maple plywood frame● Frame slides on full access glides● Includes bag storage tray at rear● Decorative hardware strongly recommended● Storage tray NOT dishwasher safe● Wastebasket lid may be ordered separately

DeskBase1FactoryInstalledWastebasket

21”Deep

● APCCCOCFO

● FE● PVS

RD

● APCCCO

● CFO● FE● PVS● RD

● APCCCO


DES

K &

OFF

ICE

CABI

NET

S132


DESK & OFFICE CABINETS: Desk Base

● Natural finish dovetail drawers with MDF bottom and 3⁄4 access side-mounted drawer glides

● 1 large and 2 standard drawers● Large drawer cannot be used as a file drawer

DDR1221DDR1521DDR1821DDR2121DDR2421

DeskDrawerCabinet21”Deep

● APCCCO


DDO1224DDO1524DDO1824DDO2124



cabinet floor

DeskDoorCabinet1Door,1Drawer

24”Deep


DDO2424 BUTT



cabinet floor

DeskDoorCabinet2Doors,1Drawer

24”Deep


● 1 large and 2 standard drawers● Large drawer cannot be used as a file drawer

DDR1224DDR1524DDR1824DDR2124DDR2424

DeskDrawerCabinet24”Deep


FDB1824

● Two-tiered file drawer system● Will accept letter or legal size hanging files

FileDrawerBaseCabinet24”Deep

● APCCCOCFO

● FE● PVS

RD

● Full height door● Features two white plastic 35 quart capacity bins● Wastebaskets rest in a natural maple plywood frame● Frame slides on full access glides● Decorative hardware strongly recommended● Wastebasket lids may be ordered separately

DWBT1824

DeskDoorCabinet2FactoryInstalledWastebaskets

24”Deep

● APCCCOCFO

● FE● PVS

RD

DES

K &

OFF

ICE

CABI

NET

S

133


DESK & OFFICE CABINETS: Desk Base

KDC27/21KDC33/27KDC36/33

● Natural finish dovetail drawer with MDF bottom andFullAccessHiddenGlides

● Designed for Desk or Vanity installation● Field trimmable in depth to 18”● Field trimmable in height to 4 3⁄4”

KneeholeDrawerCabinet

● CCO● RD SUCO24

● SUCO24 installs below 24” wide wall cabinet● All door styles feature 1⁄2” veneered engineered

wood finished to match cabinet exterior● Flush sides with no face frame or 1⁄4” reveals● Opening is 5” high

ShelfUnderCabinetOrganizer24”

SUCO27SUCO30

● SUCO27 installs below 27” wide wall cabinet● SUCO30 installs below 30” wide wall cabinet● All door styles feature 1⁄2” veneered engineered

wood finished to match cabinet exterior● Flush sides with no face frame or 1⁄4” reveals● Opening is 5” high

ShelfUnderCabinetOrganizer27”&30”

A BSUCO27 27” 8 7⁄8”SUCO30 30” 11 3⁄8”

BSPLY2434BSPLY2434 TKBBSPLY2434 TKLBSPLY2434 TKR

● All Plywood Construction standard● Interior finished to match cabinet exterior● Must specify toe kick preference when ordering –

BSPLY2434 is shown● Features two adjustable 3⁄4” veneered plywood

shelves● Shelving packaged separately

BaseBookshelves341⁄2”High

ToeKicks

FullBSPLY2434

LeftBSPLY2434

TKL

RightBSPLY2434

TKR

BothBSPLY2434

TKB

● FE● ID● RD

BSPLY1848BSPLY2448BSPLY3048BSPLY3648

● All Plywood Construction standard● Interior finished to match cabinet exterior● Features three adjustable 3⁄4” veneered plywood


WallBookshelves48”High

● FE● ID● RD


● All Plywood Construction standard● Interior finished to match cabinet exterior● Features four adjustable 3⁄4” veneered plywood


WallBookshelves60”High

● FE● ID● RD

A B Max. TrimKDC27/21 27” 17 3⁄4” 21” (3” each side)KDC33/27 33” 23 3⁄4” 27” (3” each side)KDC36/33 36” 29 3⁄4” 33” (1 1⁄2” each side)

DES

K &

OFF

ICE

CABI

NET

S134


DESK & OFFICE CABINETS: Specialty & Bookshelves

● All Plywood Construction standard● Interior finished to match cabinet exterior● Flush furniture toe kick ● Features five adjustable 3⁄4” veneered plywood


TallBookshelves84”High


● FE● ID● RD

● All Plywood Construction standard● Interior finished to match cabinet exterior● Flush furniture toe kick ● Features six adjustable 3⁄4” veneered plywood




● FE● ID● RD

● All Plywood Construction standard● Interior finished to match cabinet exterior● Flush furniture toe kick shipped unattached ● Features six adjustable 3⁄4” veneered plywood




● FE● ID● RD

DES

K &

OFF

ICE

CABI

NET

S

135


DESK & OFFICE CABINETS: Bookshelves

KBT30

● Field installation accessory● Designed to mount to underside of countertop● For 21” and 24” deep Desk installation only ● Requires 30” or wider opening● Features ball bearing glide system● Includes gel-wrist rest● Black finish

KeyboardTray

DROT12DROT15DROT18DROT21DROT24

DROT1221DROT1521DROT1821DROT2421

● Field installation accessory● Natural finish dovetail drawer with MDF bottom

and side-mounted drawer glides● Includes tray, all glide hardware and installation

instructions

DeepRollOutTrayKit

A BDROT12 7 3⁄4” 21”DROT15 10 3⁄4” 21”DROT18 13 3⁄4” 21”DROT21 16 3⁄4” 21”DROT24 19 3⁄4” 21”DROT1221 7 3⁄4” 18”DROT1521 10 3⁄4” 18”DROT1821 13 3⁄4” 18”DROT2421 19 3⁄4” 18”

● RD

DROTCC12DROTCC15DROTCC18 DROTCC21DROTCC24

DROTCC1221DROTCC1521DROTCC1821DROTCC2421


full access CushionClose glides● Includes tray, all glide hardware and installation

instructions


A BDROTCC12 7 3⁄4” 21”DROTCC15 10 3⁄4” 21”DROTCC18 13 3⁄4” 21”DROTCC21 16 3⁄4” 21”DROTCC24 19 3⁄4” 21”DROTCC1221 7 3⁄4” 18”DROTCC1521 10 3⁄4” 18”DROTCC1821 13 3⁄4” 18”DROTCC2421 19 3⁄4” 18”

● RD

DES

K &

OFF

ICE

CABI

NET

S136


DESK & OFFICE CABINETS: Accessories

Dimensions Width Depth Height 12” to 36” 12” to 24” 84” to 96” (Reduced Depth optional on select cabinets)

SKU Coding

UT 18 24 X 90 Cabinet Type width depth height (e.g., UT= in inches in inches in inches Utility Cabinet)


APC. . . . . . . . . . . . . . . . . .All Plywood ConstructionCFO. . . . . . . . . . . . . . . . . . . . . . .Cabinet Front OnlyFE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture EndsMFD . . . . . . . . . . . . . . . . . . . . .Mullion Frame DoorMI . . . . . . . . . . . . . . . . . . . . . . . . . Matching InteriorOFD . . . . . . . . . . . . . . . . . . . . . . Open Frame DoorPVS . . . . . . . . . . . . . . . . . . Plywood Veneered SidesRD. . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth

Tall Cabinets

TALL

CAB

INET

S

137

UtilityCabinetsrangeinsizefrom12”to36”wide,84”to96”highandfrom12”to24”deep.

SingledoorcathedralUtilityCabinetsmustbeorderedhingedleftorright.SingledoorsquareUtilityCabinetsarehingedleftandcanbereversedinthefield.

AllUtilityCabinetbottomdoorswillhaveacenterrailwiththeexceptionofwhiteThermoFoildoorstyles(Annapolis,Charlottesville,DelRay,Newport)andallGettysburgdoorstyles.


Utility Cabinets

UT1212 X 84UT1512 X 84UT1812 X 84UT1512 X 90UT1812 X 90UT1512 X 96UT1812 X 96

● Shelving and optional interior accessories may be ordered separately – refer to Utility Cabinet Accessories for details

● 4” inset toe kick assembly shipped inside 96” high cabinet

UtilityCabinet12”Deep,2Doors

A84” High 26 7⁄8”90” High 32 7⁄8”96” High 38 7⁄8”

● APC● CFO● FE● MFD● MI● OFD● PVS● RD

UT2412 X 84 BUTTUT2412 X 90 BUTTUT2412 X 96 BUTT




A84” High 26 7⁄8”90” High 32 7⁄8”96” High 38 7⁄8”


TALL CABINETS: UtilityTA

LL C

ABIN

ETS

138


UT1224 X 84UT1524 X 84UT1824 X 84UT1524 X 90UT1824 X 90UT1524 X 96UT1824 X 96


● Cabinet backs are pre-drilled to accept up to four Deep Roll Out Trays in lower section



A84” High 26 7⁄8”90” High 32 7⁄8”96” High 38 7⁄8”


UT2424 X 84 BUTTUT2424 X 90 BUTTUT2424 X 96 BUTT





A84” High 26 7⁄8”90” High 32 7⁄8”96” High 38 7⁄8”


UT3024 X 84 UT3624 X 84 UT3024 X 90 UT3624 X 90 UT3024 X 96UT3624 X 96

● Left doors with battens● Shelving and optional interior accessories may

be ordered separately – refer to Utility Cabinet Accessories for details




A84” High 26 7⁄8”90” High 32 7⁄8”96” High 38 7⁄8”


TALL CABINETS: Utility

TALL

CAB

INET

S

139


UT1212 X 84 ASUT1512 X 84 ASUT1812 X 84 ASUT1512 X 90 ASUT1812 X 90 ASUT1512 X 96 ASUT1812 X 96 AS

● Full depth adjustable shelves are 3⁄4” engineered wood and edge banded on front edge only

● All shelving packaged separately● 4” inset toe kick assembly shipped inside 96”

high cabinet


withAdjustableShelves

● APCCFO

● FE● MFD● MI● OFD● PVS● RD

UT2412 X 84 AS BUTTUT2412 X 90 AS BUTTUT2412 X 96 AS BUTT



high cabinet



● APCCFO


UT1224 X 84 ASUT1524 X 84 ASUT1824 X 84 ASUT1524 X 90 ASUT1824 X 90 ASUT1524 X 96 ASUT1824 X 96 AS



high cabinet



● APCCFO


Number Shelves Number Shelves Top Section Lower Section84" High 1 490" High 2 496" High 3 4




LL C

ABIN

ETS

140


UT2424 X 84 AS BUTTUT2424 X 90 AS BUTTUT2424 X 96 AS BUTT



high cabinet



● APCCFO


UT3024 X 84 ASUT3624 X 84 ASUT3024 X 90 ASUT3624 X 90 ASUT3024 X 96 ASUT3624 X 96 AS

● Left doors with battens● Full depth adjustable shelves are 3⁄4” engineered

wood and edge banded on front edge only● All shelving packaged separately● 4” inset toe kick assembly shipped inside 96”

high cabinet



● APCCFO


UT1224 X 84 4ROTUT1524 X 84 4ROTUT1824 X 84 4ROTUT1524 X 90 4ROTUT1824 X 90 4ROTUT1524 X 96 4ROTUT1824 X 96 4ROT


● All shelving and Deep Roll Out Trays packaged separately for field installation



withDeepRollOutTrays

● APCCFO




Number Shelves Number Deep Top Section Roll Out Trays84" High 1 490" High 2 496" High 3 4

TALL CABINETS: Utility

TALL

CAB

INET

S

141


UT2424 X 84 4ROT BUTTUT2424 X 90 4ROT BUTTUT2424 X 96 4ROT BUTT






● APCCFO


UT3024 X 84 4ROTUT3624 X 84 4ROTUT3024 X 90 4ROTUT3624 X 90 4ROTUT3024 X 96 4ROTUT3624 X 96 4ROT


wood and edge banded on front edge only● All shelving and Deep Roll Out Trays packaged

separately for field installation● 4” inset toe kick assembly shipped inside 96”

high cabinet



● APCCFO




UT1224 X 84 CC4ROTUT1524 X 84 CC4ROTUT1824 X 84 CC4ROTUT1524 X 90 CC4ROTUT1824 X 90 CC4ROTUT1524 X 96 CC4ROTUT1524 X 96 CC4ROT





UtilityCabinet24"Deep,2Doors

withDeepRollOutTrayswithFullAccessCushionCloseGlides

● APCCFO




LL C

ABIN

ETS

142


UT3624 X 84 PCDSUT3624 X 90 PCDSUT3624 X 96 PCDS

● Left doors with battens● Accessories and shelving packaged separately for

field installation and include: •PantrySwingOutKit(PCSK36) •TwoPantryDoorShelfKits(PDSK18) •UtilityCabinetShelfandPilasterKit(PSK36)● Full depth adjustable shelves are 3⁄4” engineered

wood and edge banded on front edge only● 4” inset toe kick assembly shipped inside 96”

high cabinet● Minimumfillerwidthof41⁄2”recommended

forinstallationofthiscabinetnexttodeeperadjacentobjectsincludingcabinets,walls,appliancesandcountertops


withPantryStorage

● APCCFO

● FE● MFD● MI● OFD● PVS

RD

UT2424 X 84 CC4ROT BUTTUT2424 X 90 CC4ROT BUTTUT2424 X 96 CC4ROT BUTT







● APCCFO


UT3024 X 84 CC4ROTUT3624 X 84 CC4ROTUT3024 X 90 CC4ROTUT3624 X 90 CC4ROTUT3024 X 96 CC4ROTUT3624 X 96 CC4ROT


wood and edge banded on front edge only● Deep Roll Out Trays feature full access

CushionClose glides ● All shelving and Deep Roll Out Trays packaged

separately for field installation● 4” inset toe kick assembly shipped inside 96”

high cabinet



● APCCFO


Number Shelves Top Section 84" High 1 90" High 2 96" High 3



Tall Cabinets: Utility

TALL

CAB

INET

S

143


Utility Cabinet Accessories

PCSK36

● Field installation accessory● For use inside UT3624● Can be used with PDSK18 and/or PSK36● Natural finish unit features two fixed and ten

adjustable shelves with chrome rail● Overall dimensions:

25 3⁄4” wide x 45” high x 7 1⁄2” deep● Not sized to fit reduced depth cabinets

PantrySwingOutKit

PDSK18

PantryDoorShelfKit

● Field installation accessory● For use inside UT1824 or UT3624● Order each door unit separately● Can be used with PCSK36 and/or PSK36● Natural finish unit features one fixed and five

adjustable shelves with chrome rail● Overall dimensions:

12” wide x 45” high x 4” deep● Not sized to fit reduced depth cabinets

TALL CABINETS: AccessoriesTA

LL C

ABIN

ETS

144


TD3

● Field installation accessory● Chrome finish● Mounting hardware included● Overall dimensions:

2 7⁄8” wide x 9 15⁄16” high x 11 3⁄4” deep● Order Cabinet Tray Dividers individually● For use in any 24” deep cabinet or reduced depth

cabinet to RD-14”

CabinetTrayDivider

PSK36

● Field installation accessory● Kit features four 9” deep shelves edge banded on

front edge only, four 36” zinc pilasters, screws and installation instructions

● For use inside UT3624● Field trimmable for use inside UT1824● Can be used with PCSK36 and/or PDSK18

UtilityCabinetShelf&PilasterKit

● APC● MI● RD

AdjustableShelf12”DeepS1212S1512S1812S2412S3612

● Field installation accessory● 3⁄4” engineered wood● Edge banded on front edge only● Shelf rests included

UtilityCabinetAdjustableShelforShelfKit

4PackShelfKit12”DeepSK1212SK1512SK1812SK2412SK3612

● APC● MI● RD

24”DeepSK1224SK1524SK1824SK2424SK2724SK3024SK3324SK3624

24”DeepS1224S1524S1824S2424S2724S3024S3324S3624

TALL CABINETS: Accessories

TALL

CAB

INET

S

145


DeepRollOutTrayKitDROT12DROT15DROT18DROT24DROT30DROT36


and side-mounted drawer glides● Includes Deep Roll Out Tray, all glide hardware

and installation instructions

UtilityCabinetDeepRollOutTrayKitor

4PackDeepRollOutTrayKit

4PackDeepRollOutTrayKitDROT12-4KDROT15-4KDROT18-4KDROT24-4KDROT30-4KDROT36-4K

ADROT12 7 3⁄4”DROT15 10 3⁄4” DROT18 13 3⁄4”DROT24 19 3⁄4”DROT30 25 3⁄4”DROT36 31 3⁄4”

● RD

UtilityCabinetDeepRollOutTrayKitor4Pack


DeepRollOutTrayKitwithFullAccessCushionCloseGlidesDROTCC12 DROTCC15DROTCC18DROTCC24 DROTCC30DROTCC36


and full access CushionClose glides● Includes Deep Roll Out Tray, all glide hardware


ADROTCC12 7 3⁄4”DROTCC15 10 3⁄4” DROTCC18 13 3⁄4”DROTCC24 19 3⁄4”DROTCC30 25 3⁄4”DROTCC36 31 3⁄4”

● RD

4PackDeepRollOutTrayKitwithFullAccessCushionCloseGlidesDROTCC12-4K DROTCC15-4KDROTCC18-4KDROTCC24-4KDROTCC30-4KDROTCC36-4K

TALL CABINETS: AccessoriesTA

LL C

ABIN

ETS

146


OvenCabinetsrangeinsizefrom27”to33”wide,from84”to96”highandare24”deep.


Oven Cabinets

OVS2784 BUTTOVS3084 (FOL)OVS3084 BUTT (POL)OVS3384

● Left doors with battens, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Refertoappliancemanufacturer's

specificationsforadequateclearancesandrequiredinstallationmaterials

SingleOvenCabinet84”High

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2784 BUTT 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3084 (BUTT) 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3384 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”

● APCCCO


OVS2790 AS BUTTOVS3090 AS (FOL)OVS3090 AS BUTT (POL)OVS3390 AS

● Left doors with battens, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Features one full depth 3⁄4” engineered wood shelf

edge banded on front edge only (for top section)● Shelf packaged separately● Refertoappliancemanufacturer's


SingleOvenCabinet90”Highwith1Shelf

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2790 AS BUTT 20 3⁄4” 25” 21 3⁄4” 37”OVS3090 AS (BUTT) 23 3⁄4” 28” 21 3⁄4” 37”OVS3390 AS 26 3⁄4” 31” 21 3⁄4” 37”

● APCCCO


TALL CABINETS: Oven

TALL

CAB

INET

S

147


OVS2784 BUTT BPPOOVS3084 BPPO (FOL)OVS3084 BUTT BPPO (POL) OVS3384 BPPO

● Left doors with battens, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Base Pot & Pan Organizer packaged separately for

field installation● Organizer in natural finish solid wood and wood


● Organizer top shelf measures 6 3⁄16” deep● Organizer middle shelf measures 9 3⁄4” deep● Refertoappliancemanufacturer's


SingleOvenCabinet84”Highwith

BasePot&PanOrganizer

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2784 BUTT BPPO 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3084 (BUTT) BPPO 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3384 BPPO 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”

● APCCCOCFO

● FE● PVS

RD

OVS2790 BUTT BPPOOVS3090 BPPO (FOL)OVS3090 BUTT BPPO (POL)OVS3390 BPPO


edge banded on front edge only● Shelf and Base Pot & Pan Organizer packaged

separately for field installation● Organizer in natural finish solid wood and wood




SingleOvenCabinet90”Highwith1Shelf

andBasePot&PanOrganizer

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2790 BUTT BPPO 20 3⁄4” 25” 21 3⁄4” 37”OVS3090 (BUTT) BPPO 23 3⁄4” 28” 21 3⁄4” 37”OVS3390 BPPO 26 3⁄4” 31” 21 3⁄4” 37”

● APCCCOCFO

● FE● PVS

RD

OVS2796 AS BUTTOVS3096 AS (FOL)OVS3096 AS BUTT (POL)OVS3396 AS

● Left doors with battens, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Features two full depth 3⁄4” engineered wood

shelves edge banded on front edge only (for top section)

● Shelving packaged separately● 4” inset toe kick assembly shipped inside cabinet● Refertoappliancemanufacturer's


SingleOvenCabinet96”Highwith2Shelves

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2796 AS BUTT 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3096 AS (BUTT) 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3396 AS 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”

● APCCCO


TALL CABINETS: OvenTA

LL C

ABIN

ETS

148


OVS2796 BUTT BPPOOVS3096 BPPO (FOL)OVS3096 BUTT BPPO (POL)OVS3396 BPPO


shelves edge banded on front edge only● Shelving and Base Pot & Pan Organizer packaged



● Organizer top shelf measures 6 3⁄16” deep● Organizer middle shelf measures 9 3⁄4” deep● 4” inset toe kick assembly shipped inside cabinet● Refertoappliancemanufacturer's


SingleOvenCabinet96”Highwith2Shelves

andBasePot&PanOrganizer

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2796 BUTT BPPO 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3096 (BUTT) BPPO 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3396 BPPO 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”

● APCCCOCFO

● FE● PVS

RD

OVS2784 BUTT CCBPPOOVS3084 CCBPPO (FOL)OVS3084 BUTT CCBPPO (POL)OVS3384 CCBPPO

● Left doors with battens, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Base Pot & Pan Organizer packaged separately for

field installation● Organizer in natural finish solid wood and wood




SingleOvenCabinet84”HighwithBasePot&PanOrganizer


● APCCCOCFO

● FE● PVS

RD

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2784 BUTT CCBPPO 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3084 (BUTT) CCBPPO 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3384 CCBPPO 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”



edge banded on front edge only● Shelf and Base Pot & Pan Organizer packaged







● APCCCOCFO

● FE● PVS

RD

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2790 BUTT CCBPPO 20 3⁄4” 25” 21 3⁄4” 37”OVS3090 (BUTT) CCBPPO 23 3⁄4” 28” 21 3⁄4” 37”OVS3390 CCBPPO 26 3⁄4” 31” 21 3⁄4” 37”

TALL CABINETS: Oven

TALL

CAB

INET

S

149


● Left door with batten, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Refertoappliancemanufacturer's


OVD2784 BUTTOVD3084 (FOL)OVD3084 BUTT (POL)OVD3384

DoubleOvenCabinet84”High

Cut Out A A B BDimensions Actual Max. Actual Max.*OVD2784 BUTT 20 3⁄4” 25” 39” 54 1⁄4”OVD3084 (BUTT) 23 3⁄4” 28” 39” 54 1⁄4”OVD3384 26 3⁄4” 31” 39” 54 1⁄4”

*Maximum height by removing drawer unit and frame horizontal is 60 1⁄4”


OVD2790 AS BUTTOVD3090 AS (FOL)OVD3090 AS BUTT (POL)OVD3390 AS

DoubleOvenCabinet90”Highwith1Shelf

● Left door with batten, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Features one full depth 3⁄4” engineered wood shelf

edge banded on front edge only (for top section)● Shelf packaged separately● Refertoappliancemanufacturer's


Cut Out A A B BDimensions Actual Max. Actual Max.*OVD2790 AS BUTT 20 3⁄4” 25” 38 5⁄8” 53 7⁄8”OVD3090 AS (BUTT) 23 3⁄4” 28” 38 5⁄8” 53 7⁄8”OVD3390 AS 26 3⁄4” 31” 38 5⁄8” 53 7⁄8”





shelves edge banded on front edge only● Shelving and Base Pot & Pan Organizer packaged



● Organizer top shelf measures 6 3⁄16” deep● Organizer middle shelf measures 9 3⁄4” deep● 4” inset toe kick assembly shipped inside cabinet● Refertoappliancemanufacturer's




● APCCCOCFO

● FE● PVS

RD

Cut Out A A B BDimensions Actual Max. Actual Max.OVS2796 BUTT CCBPPO 20 3⁄4” 25” 22 1⁄8” 37 3⁄8”OVS3096 (BUTT) CCBPPO 23 3⁄4” 28” 22 1⁄8” 37 3⁄8”OVS3396 CCBPPO 26 3⁄4” 31” 22 1⁄8” 37 3⁄8”

TALL CABINETS: OvenTA

LL C

ABIN

ETS

150


OVD2796 AS BUTTOVD3096 AS (FOL)OVD3096 AS BUTT (POL)OVD3396 AS

● Left door with batten, excluding BUTT cabinets● 3 1⁄8” stiles● Full overlay door styles feature face-mount hinges● Features two full depth 3⁄4” engineered wood

shelves edge banded on front edge only (for top section)

● Shelving packaged separately● 4” inset toe kick assembly shipped inside cabinet● Refertoappliancemanufacturer's


DoubleOvenCabinet96”Highwith2Shelves

Cut Out A A B BDimensions Actual Max. Actual Max.*OVD2796 AS BUTT 20 3⁄4” 25” 39” 54 1⁄4”OVD3096 AS (BUTT) 23 3⁄4” 28” 39” 54 1⁄4”OVD3396 AS 26 3⁄4” 31” 39” 54 1⁄4”



HSK

● Field installation accessory● Available for White Thermo Foil door styles only● Recommended for use as a heat shield for all White Thermo Foil door styles● Protects doors and drawer fronts from adjacent heat source

(built-in ovens, under counter ovens, drop-in or free-standing ranges)● Kit features: Two white 1⁄16” metal heat shields One strip of wood QM8 WD molding shield

HeatShieldKit

OSS27OSS30

OSS33

● Features 3⁄4” unfinished engineered wood shelf and six mounting clips with screws

● Will support up to 300 lbs when installed per included installation instructions

● Refertoappliancemanufacturer'sspecificationsforadequateclearancesandweightrequirements

OvenSupportShelf

TD3

● Field installation accessory● Chrome finish● Mounting hardware included● Overall dimensions:

2 7⁄8” wide x 9 15⁄16” high x 11 3⁄4” deep● Order Cabinet Tray Dividers individually● Sized for use in any 24” deep cabinet or reduced

depth cabinets to RD-14”

CabinetTrayDivider

TALL CABINETS: Oven & Accessories

TALL

CAB

INET

S

151


TALL CABINETS: NotesTA

LL C

ABIN

ETS

152


Dimensions Width Height Depth 12” to 60” 31 1⁄8” to 84” 18” to 20 3⁄4” (Reduced Depth optional on select cabinets)

SKU Coding

VAN 42 Cabinet Type width in inches (e.g., VAN=Vanity Sink Base)


APC. . . . . . . . . . . . . . . . . .All Plywood ConstructionCFO. . . . . . . . . . . . . . . . . . . . . . .Cabinet Front OnlyFE . . . . . . . . . . . . . . . . . . . . . . . . . . . Furniture EndsMFD . . . . . . . . . . . . . . . . . . . . .Mullion Frame DoorMI . . . . . . . . . . . . . . . . . . . . . . . . . Matching InteriorOFD . . . . . . . . . . . . . . . . . . . . . . Open Frame DoorPVS . . . . . . . . . . . . . . . . . . Plywood Veneered SidesRD. . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth

Vanity Cabinets

VAN

ITy

CABI

NET

S

153

Vanitycabinetsfeaturedovetaildrawerconstructionwith¾accessside-mounteddrawerglides.CushionCloseGlideOptionisNOTavailableforVanitycabinets.

StandardHeightVanityCabinetsare311⁄8”high,12”to60”wideand18“or203⁄4”deep.

CathedraldoorsarenotavailableonStandardHeightVanityBaseCabinets.

SingledoorStandardHeightVanityCabinetsarehingedleftandcanbereversedinthefield.


311⁄8” Standard HeightVanity Cabinets

VB24 BUTT

● No shelf● Natural finish dovetail drawer with MDF bottom

and 3⁄4 access side-mounted drawer glides

VanityBase2Doors,1Drawer•311⁄8”High

VDB12VDB15VDB18VDB24


● 1 large and 2 standard drawers

VanityDrawerBase3Drawers•311⁄8”High

VWBT18

● Full height door● Features one white plastic 35 quart capacity bin● Wastebasket rests in a natural maple plywood frame● Frame slides on full access glides● Includes bag storage tray at rear● Decorative hardware strongly recommended● Storage tray NOT dishwasher safe● Wastebasket lid may be ordered separately

VanityBase1FactoryInstalledWastebasket•311⁄8”High

VB12VB15VB18VB21

● APCCCO




VanityBase1Door,1Drawer•311⁄8”High

● APCCCO


● APCCCO


● APCCCOCFO

● FE● PVS

RD

Refertosinkmanufacturer’sspecificationsforadequateclearanceandrequiredinstallationmaterials.

When placing a Standard Height Vanity Sink Base Cabinet in a design, select a cabinet at least 3” wider than the sink to allow for installation clips. Review manufacturer’s specifications for dimensions and adequate clearance requirements.

VANITy CABINETS: 311⁄8” Standard HeightVA

NIT

y CA

BIN

ETS

154


VSB24 BUTTVSB27 BUTT

● No shelf● Subtract 1 1⁄2” from depth and width for available

sink bowl opening

VanitySinkBase2Doors,1Panel•311⁄8”High

VSB2418 BUTT


sink bowl opening

VanitySinkBase–18”Deep2Doors,1Panel•311⁄8”High

VSB30VSB33VSB36


sink bowl opening


VSB3018VSB3618


sink bowl opening


VSB42


sink bowl opening

VanitySinkBase2Doors,2Panels•311⁄8”High

● APCCCO


● APCCCO


● APCCCO


● APCCCO


● APCCCO


VSB15VSB18VSB21


sink bowl opening

VanitySinkBase1Door,1Panel•311⁄8”High

● APCCCO


VANITy CABINETS: 311⁄8” Standard Height

VAN

ITy

CABI

NET

S

155


VAN48

● No shelf● Natural finish dovetail drawers with MDF bottom

and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Subtract 1 1⁄2” from depth and 21” dimension for

available sink bowl opening● Hinged as shown – center door may be reversed

in field

VanitySinkBase3Doors,2Drawers•311⁄8”High

● APCCCO


VSB48


sink bowl opening● Hinged as shown – center door may be reversed

in field


● APCCCO


VSB54 BUTT

● No shelf● Subtract 1 1⁄2” from depth and each 27” dimension

for available sink bowl openings


● APCCCO


VSB60




● APCCCO


AVAN36 17”VAN42 21”

VAN36VAN42


and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Subtract 1 1⁄2” from depth and dimension A for

available sink bowl opening


● APCCCO


● APCCCO



A BVAN54 30” 12”VAN60 30” 15”


and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Open area for plumbing access● Subtract 1 1⁄2” from depth and dimension A

for available sink bowl opening

VAN54VAN60


NIT

y CA

BIN

ETS

156


● APCCCO


A BVSDB24 12” 12”VSDB30 18” 12”VSDB36 21” 15”

VSDB24VSDB30VSDB36


and 3⁄4 access side-mounted drawer glides● Open area for plumbing access● Allow for plumbing placement to clear drawers● Drawers available on right or left side (please specify)● Cabinet shown is right indicating drawers on the

right side of the cabinet● Subtract 1 1⁄2” from depth and overall cabinet

width for available sink bowl opening

VanityComboSinkBase1Door,2Drawers•311⁄8”High

VSDB42



right side of the cabinet● Subtract 1 1⁄2” from depth and 30” dimension

for available sink bowl opening● Requires off-center sink bowl opening

VanityComboSinkBase2Doors,3Drawers•311⁄8”High

● APCCCO


● APCCCO


A BVSDB48D BUTT 24” 12”VSDB54D BUTT 24” 15”


and 3⁄4 access side-mounted drawer glides● Open area for plumbing access● Subtract 1 1⁄2” from depth and dimension A for



VSDB48D BUTTVSDB54D BUTT

A BVSDB2418 12” 12”VSDB3018 18” 12”VSDB3618 21” 15”

VSDB2418VSDB3018VSDB3618





VanityComboSinkBase18”Deep•311⁄8”High

● APCCCO


● APCCCO



and 3⁄4 access side-mounted drawer glides● Open area for plumbing access● Subtract 1 1⁄2” from depth and 30” dimension for



VSDB60D● APC

CCO● CFO● FE● PVS● RD

VSDB60C BUTT


and 3⁄4 access side-mounted drawer glides● Open areas for plumbing access● Subtract 1 1⁄2” from depth and each 24” dimension



VANITy CABINETS: 311⁄8” Standard Height

VAN

ITy

CABI

NET

S

157


VSF21

● Vanity Sink Front not trimmable● Orderfloorsandreturnsseparately


VanitySinkFront1Door,1Panel•311⁄8”High

VSF24 BUTT



VanitySinkFront2Doors,1Panel•311⁄8”High

VSF30VSF36



VanitySinkFront2Doors,1Panel•311⁄8”High

VSF42



VanitySinkFront2Doors,2Panels•311⁄8”High

VSF48

● Vanity Sink Front not trimmable● Hinged as shown – center door may be reversed

in field● Orderfloorsandreturnsseparately


VanitySinkFront3Doors,3Panels•311⁄8”High


NIT

y CA

BIN

ETS

158


BaseHeightVanityCabinetsare341⁄2”high,12”to60”wideand18“or203⁄4”deep.

CathedraldoorsarenotavailableonBaseHeightVanityBaseCabinets.

SingledoorBaseHeightVanityCabinetsarehingedleftandcanbereversedinthefield.


341⁄2” Base Height Vanity Cabinets

VB1234HVB1534HVB1834HVB2134H



VanityBase1Door,1Drawer•341⁄2”High

VB2434H BUTT



VanityBase2Doors,1Drawer•341⁄2”High

VDB1234HVDB1534HVDB1834HVDB2434H



VanityDrawerBase3Drawers•341⁄2”High

VWBT1834H


● Features one white plastic 35 quart capacity bin● Wastebasket rests in a natural maple plywood frame● Frame slides on full access glides● Includes bag storage tray at rear● Decorative hardware strongly recommended● Storage tray NOT dishwasher safe● Wastebasket lid may be ordered separately

VanityBase1FactoryInstalledWastebasket•341⁄2”High

● APCCCO


● APCCCO


● APCCCOCFO

● FE● PVS

RD

● APCCCO


Checksinkmanufacturer’sspecificationsforadequateclearanceandrequiredinstallationmaterials.

When placing a Base Height Vanity Sink Base Cabinet in a design, select a cabinet at least 3” wider than the sink to allow for installation clips. Review manufacturer’s specifications for dimensions and adequate clearance requirements.

VANITy CABINETS: 341⁄2” Base Height

VAN

ITy

CABI

NET

S

159


VSB2434H BUTTVSB2734H BUTT


sink bowl opening


● APCCCO


VSB241834H BUTT


sink bowl opening


● APCCCO


VSB3034HVSB3334HVSB3634H


sink bowl opening


● APCCCO


VSB301834HVSB361834H


sink bowl opening


● APCCCO


VSB4234H


sink bowl opening


● APCCCO


VSB1534HVSB1834HVSB2134H


sink bowl opening

VanitySinkBase1Door,1Panel•341⁄2”High

● APCCCO


VANITy CABINETS: 341⁄2” Base HeightVA

NIT

y CA

BIN

ETS

160


VSB6034H




● APCCCO


VAN3634HVAN4234H

AVAN3634H 17”VAN4234H 21”



and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Subtract 1 1⁄2” from depth and dimension A for


● APCCCO


VAN4834H


and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Subtract 1 1⁄2” from depth and 21” dimension for

available sink bowl opening● Hinged as shown – center door may be reversed

in field


● APCCCO


● APCCCO



and 3⁄4 access side-mounted drawer glides● Top drawer on each side of sink bowl opening● Open area for plumbing access● Subtract 1 1⁄2” from depth and dimension A for



VAN5434HVAN6034H

A BVAN5434H 30” 12”VAN6034H 30” 15”

VSB4834H


sink bowl opening● Hinged as shown – center door may be reversed

in field


● APCCCO


● APCCCO


VSB5434H BUTT




VANITy CABINETS: 341⁄2” Base Height

VAN

ITy

CABI

NET

S

161



and 3⁄4 access side-mounted drawer glides● Open area for plumbing access● Subtract 1 1⁄2” from depth and dimension A for


A BVSDB4834HD BUTT 24” 12”VSDB5434HD BUTT 24” 15”


VSDB4834HD BUTTVSDB5434HD BUTT

● APCCCO


VSDB6034HD


and 3⁄4 access side-mounted drawer glides● Open area for plumbing access● Subtract 1 1⁄2” from depth and 30” dimension for



● APCCCO


VSDB6034HC BUTT


and 3⁄4 access side-mounted drawer glides● Open areas for plumbing access● Subtract 1 1⁄2” from depth and each 24” dimension



● APCCCO






A BVSDB241834H 12” 12”VSDB301834H 18” 12”VSDB361834H 21” 15”

VSDB241834HVSDB301834HVSDB361834H

VanityComboSinkBase18”Deep•341⁄2”High

● APCCCO


A BVSDB2434H 12” 12”VSDB3034H 18” 12”VSDB3634H 21” 15”

VSDB2434HVSDB3034HVSDB3634H





VanityComboSinkBase1Door,2Drawers•341⁄2”High

● APCCCO


VSDB4234H



right side of the cabinet● Subtract 1 1⁄2” from depth and 30” dimension for

available sink bowl opening● Requires off-center sink bowl opening


● APCCCO


VANITy CABINETS: 341⁄2” Base HeightVA

NIT

y CA

BIN

ETS

162


TV3030TV3630

● All three mirrored doors swing open for easy access to the six adjustable shelves

● Surface or recess mount● For surface mount installation of wood door styles,

trim and apply WEP30 (order separately) to match finish on exterior sides to cabinet frame

● Chrome hardware

Tri-ViewMirror

Cut Out Cut Out Width Height

Overall Overall Recess Recess Width Height Mount MountTV3030 30” 30 1⁄8” 28 1⁄2” 28 1⁄2”TV3630 36” 30 1⁄8” 34 1⁄2” 28 1⁄2”

MC1530MCM1530

● Two adjustable engineered wood shelves● Surface or recess mount● MCM1530featuresamirroreddoor● For surface mount installation of wood door styles,

trim and apply WEP30 (order separately) to match finish on exterior sides to cabinet frame

MedicineCabinet

Cut Out Cut Out Width Height

Overall Overall Recess Recess Width Height Mount MountMC1530 15” 30 1⁄8” 14 1⁄2” 28 1⁄2”MCM1530 15” 30 1⁄8” 14 1⁄2” 28 1⁄2”

VC2436 BUTT

● Matching interior standard● Flush sides with no face frame or 1⁄4” reveals● Bottom opening: 22 1⁄2” x 10 7⁄8”● Features a fixed shelf● Sides and bottom shelf feature 3⁄4” engineered

wood veneered on both sides

ValetCabinetSpecialty Vanity Cabinet

KDC27/21KDC33/27KDC36/33

● Natural finish dovetail drawer with MDF bottom andFullAccessHiddenGlides

● Designed for Desk or Vanity application● Field trimmable in height to 4 3⁄4”● Field trimmable in depth to 18” or Reduced Depth

Option is available

KneeholeDrawerCabinet

● CCO● RD

A B Max. TrimKDC27/21 27” 17 3⁄4” 21” (3” each side)KDC33/27 33” 23 3⁄4” 27” (3” each side)KDC36/33 36” 29 3⁄4” 33” (1 1⁄2” each side)

VANITy CABINETS: Speciality

VAN

ITy

CABI

NET

S

163


VanityLinenCabinetsrangeinsizefrom12”to24”wide,are84”highand203⁄4”deep.

SingledoorcathedralVanityLinenCabinetsmustbeorderedhingedleftorright.SingledoorsquareVanityLinenCabinetsarehingedleftandcanbereversedinthefield.

AllVanityLinenCabinetbottomdoorswillhaveacenterrailwiththeexceptionofwhiteThermoFoildoorstyles(Annapolis,Charlottesville,DelRay,Newport)andallGettysburgdoorstyles.


Vanity Linen Cabinets

VLC122184VLC152184VLC182184

● Shelving and optional interior accessories may be ordered separately – refer to Vanity Linen Cabinet Accessories for details


VanityLinenCabinet2Doors


VLC242184 BUTT

● Shelving and optional interior accessories may be ordered separately – refer to Vanity Linen Cabinet Accessories for details


VanityLinenCabinet4Doors


VANITy CABINETS: Vanity LinenVA

NIT

y CA

BIN

ETS

164


VLC122184 ASVLC152184 ASVLC182184 AS

● Features one full depth shelf in top section and four full depth shelves in lower section


● All shelving packaged separately

VanityLinenCabinet2DoorswithAdjustableShelves

● APCCFO


VLC242184 AS BUTT

● Features one full depth shelf in top section and four full depth shelves in lower section


● All shelving packaged separately

VanityLinenCabinet4DoorswithAdjustableShelves

● APCCFO


VLC122184 4ROTVLC152184 4ROTVLC182184 4ROT

● Features one full depth shelf in top section and four Deep Roll Out Trays in lower section

● Full depth adjustable shelf is 3⁄4” engineered wood and edge banded on front edge only


VanityLinenCabinet2DoorswithDeepRollOutTrays

● APCCFO


VANITy CABINETS: Vanity Linen

VAN

ITy

CABI

NET

S

165


VLC242184 4ROT BUTT

● Features one full depth shelf in top section and four Deep Roll Out Trays in lower section




● APCCFO


VLC122184 CC4ROTVLC152184 CC4ROTVLC182184 CC4ROT

● Features one full depth shelf in top section and four Deep Roll Out Trays with full access CushionClose glides in lower section


● Adjustable shelf and Deep Roll Out Trays packaged separately for field installation



● APCCFO


VLC242184 CC4ROT BUTT

● Features one full depth shelf in top section and four Deep Roll Out Trays with full access CushionClose glides in lower section


● Adjustable shelf and Deep Roll Out Trays packaged separately for field installation



● APCCFO


VANITy CABINETS: Vanity LinenVA

NIT

y CA

BIN

ETS

166


● Field installation accessory● 3⁄4” engineered wood● Edge banded on front edge only● Shelf rests included

VanityLinenCabinetAdjustableShelforShelfKit

Adjustable ShelfS1221S1521S1821S24214 Pack Shelf KitSK1221SK1521SK1821SK2421

● APC● MI● RD


and side-mounted drawer glides● Includes Deep Roll Out Tray, all glide hardware


VanityLinenCabinetDeepRollOutTrayKitor

4PackDeepRollOutTrayKit

Deep Roll Out Tray KitDROT1221DROT1521DROT1821DROT24214 Pack Deep Roll Out Tray KitDROT1221-4KDROT1521-4KDROT1821-4KDROT2421-4K

ADROT1221 7 3⁄4”DROT1521 10 3⁄4” DROT1821 13 3⁄4”DROT2421 19 3⁄4”

● RD


and full access CushionClose glides● Includes Deep Roll Out Tray, all glide hardware


VanityLinenCabinetDeepRollOutTrayKitor4PackKit


Deep Roll Out Tray Kit with FullAccess CushionClose GlidesDROTCC1221 DROTCC1521 DROTCC1821 DROTCC2421 4 Pack Deep Roll Out Tray Kit with Full Access CushionCloseGlidesDROTCC1221-4K DROTCC1521-4K DROTCC1821-4KDROTCC2421-4K

ADROTCC1221 7 3⁄4”DROTCC1521 10 3⁄4” DROTCC1821 13 3⁄4”DROTCC2421 19 3⁄4”

● RD

VANITy CABINETS: Accessories

VAN

ITy

CABI

NET

S

167


VANITy CABINETS: NotesVA

NIT

y CA

BIN

ETS

168

Panels, Fillers & Moldings

Allpanels,fillersandmoldingsareavailableinallfinishcolors,unlessotherwisenoted.

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

169

FL24FL36FL36X36FL48

FL48X48FL60FL72

● All door styles feature 1⁄2” engineered wood with natural woodgrain TuffTech finish on one side

● 1⁄2” oversize in width ● FL36x36 to be used for CSF36 (trim to fit)● FL48x48 to be used for CSF42 (trim to fit)● Field trimmable

Sink /VanityFrontFloor

DEP

● All door styles feature 3⁄4” veneered engineered wood finished to match cabinet exterior on both sides

● Recommend QM8 WD be ordered for installation to ensure proper attachment to wall

● Field trimmable

DeskEndPanel

● All door styles feature 1⁄2” engineered wood with outside finished to match cabinet exterior and inside with natural woodgrain TuffTech finish

● Specify left or right ● Attaching blocks included● SFR (R/L) with the Furniture Ends Option (FE) will

include a rabbetted front edge● Field trimmable

Sink /VanityFrontReturn

SFRRSFRL

Panels


● Reversible for left or right installation● Solid wood front● All door styles feature 1⁄2” engineered wood with

outside finished to match cabinet exterior and inside with natural woodgrain TuffTech finish

● Attaching blocks included● Field trimmable to 1” in width

DishwasherReturn

DWR3● APC● FE● PVS

PANELS, FILLERS & MOLDINGS: PanelsPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

170


WEP30 GROOVEDWEP42 GROOVEDWEP48 GROOVEDWEP1542 GROOVEDBEP34 GROOVEDTEP84 GROOVEDTEP96 GROOVED

● Grooved every 1 1⁄2” on one side● All door styles feature 3⁄16” veneered plywood

finished to match cabinet exterior● Groovedpanelsdonotmatch

V-Groovedoorstyles● Field trimmable

GroovedEndPanel

A BWEP30 GROOVED 11 1⁄4” 30 1⁄8”WEP42 GROOVED 11 1⁄4” 42 1⁄8”WEP48 GROOVED 11 1⁄4” 48”WEP1542 GROOVED 14 1⁄4” 42 1⁄8”

BEP34 GROOVED 23 1⁄4” 34 1⁄2”

TEP84 GROOVED 23 1⁄4” 84”TEP96 GROOVED 23 1⁄4” 96”

● Forwooddoorstyles,excludingMapleButterscotch,Cream,HazelnutandLinenfinishes

● Features 3⁄16” veneered plywood finished on one side

● Field trimmable

EndPanel(WD)

A BWEP30 WD 11 1⁄4” 30 1⁄8”WEP42 WD 11 1⁄4” 42 1⁄8”WEP48 WD 111⁄4” 48”WEP1542 WD 14 1⁄4” 42 1⁄8”

BEP34WD 23 1⁄4” 34 1⁄2”

TEP84WD 23 1⁄4” 84”TEP96WD 23 1⁄4” 96”

WEP30 WDWEP42 WDWEP48 WDWEP1542 WDBEP34 WDTEP84 WDTEP96 WD

● ForWhiteThermoFoildoorstylesandMapleButterscotch,Cream,HazelnutandLinenfinishesonly

● Features 3⁄16” roll-coated industrial substrate finished on one side

● Field trimmable

EndPanel(PRT)

A BWEP30 PRT 11 1⁄4” 30 1⁄8”WEP42 PRT 11 1⁄4” 42 1⁄8”WEP48 PRT 11 1⁄4” 48”WEP1542 PRT 14 1⁄4” 42 1⁄8”

BEP34 PRT 23 1⁄4” 34 1⁄2”

TEP84 PRT 23 1⁄4” 84”TEP96 PRT 23 1⁄4” 96”

WEP30 PRTWEP42 PRTWEP48 PRTWEP1542 PRTBEP34 PRTTEP84 PRTTEP96 PRT

PANELS, FILLERS & MOLDINGS: Panels

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

171


WTEP84WTEP96

● Wood door styles feature 3⁄4” veneered engineered wood finished to match cabinet exterior on both sides

● White Thermo Foil door styles feature 3⁄4” engineered wood with melamine finish on both sides

● Edge banded on both long edges● Field trimmable

WoodTallEndPanel24”Deep

AWTEP84 84”WTEP96 96”

DWTEP84DWTEP96




DeepWoodTallEndPanel32”Deep

ADWTEP84 84”DWTEP96 96”

FP4834 GROOVEDFP4896 GROOVEDFP9634 GROOVED

● Grooved every 1 1⁄2” on one side● All door styles feature 3⁄16” veneered plywood

finished to match cabinet exterior● FP9634Groovedpanelingisshippedas

two48”widex341⁄2”highpanels● Groovedpanelsdonotmatch

V-Groovedoorstyles● Field trimmable

GroovedFinishedPaneling

A BFP4834 GROOVED 48” 34 1⁄2”FP4896 GROOVED 48” 96”FP9634 GROOVED 96” 34 1⁄2”


● Features 3⁄16” veneered plywood finished on one side

● Field trimmable

FinishedPaneling(WD)

A BFP4834 WD 48” 34 1⁄2”FP4896 WD 48” 96”FP9634 WD 96” 34 1⁄2”

FP4834 WDFP4896 WDFP9634 WD

WBEP




WoodBaseEndPanel


● Features 3⁄16” roll-coated industrial substrate finished on one side

● Field trimmable

FinishedPaneling(PRT)

A BFP4834 PRT 48” 34 1⁄2”FP4896 PRT 48” 96”

FP4834 PRTFP4896 PRT


NEL

S, F

ILLE

RS &

MO

LDIN

GS

172


BLC1515

● All door styles feature 1⁄2” engineered wood with natural woodgrain TuffTech finish on both sides

● Field trimmable

BlindCornerClosure

DIP

● Wood door styles, excluding Maple Butterscotch, Cream, Hazelnut and Linen finishes, feature 3⁄16” veneered plywood finished to match cabinet exterior on one side

● White Thermo Foil door styles and Maple Butterscotch, Cream, Hazelnut and Linen finishes feature 3⁄16” roll-coated industrial substrate finished on one side

● Field trimmable

DishwasherInsertPanel

RR84RR96

● Reversible for left or right installation● Solid wood front● All door styles feature 1⁄2” engineered wood with

outside finished to match cabinet exterior and inside with natural woodgrain TuffTech finish

● Field trimmable

RefrigeratorReturnPanel

ARR84 84”RR96 96”


SOF96

● Available in white only● 1⁄2” veneered engineered wood painted white

both sides● Edge banded on one long and two short edges● Field trimmable

SoffitSpacer

● Field trimmable in height and width● All door styles feature 3⁄4” engineered wood

finished on one side to match cabinet exterior● Toe kick is attached and can be removed for

alignment

Drop-InRangeFront

DORF30

● Field trimmable● Veneered engineered wood, edge banded all sides

FinishedShelf

FS4812FS6012FS7212

AFS4812 48 1⁄4”FS6012 60 1⁄4”FS7212 72 1⁄4”


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

173


DMDW18DMDW24DMDW30DMDW36DMDW42

● Furniture Ends Option (FE) or WEP30/WEP42 panel is recommended for installation

● Attaches to side of Wall cabinet● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● Refer to the Parts Directory section of this guide

for dimensions

DecoratorMatchingDoorsWallCabinets

DMDV

● Furniture Ends Option (FE) or BEP34 panel is recommended for installation

● Attachestosideof203⁄4”deepx311⁄8”highVanitycabinet

● ForBaseHeightVanityorderDR2130doorfordecorativeendpanel

● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● Refer to the Parts Directory section of this guide

for dimensions

DecoratorMatchingDoorsVanityCabinets

DMDD21DMDD24


● Attaches to side of 21” or 24” deep Desk cabinet● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● Refer to the Parts Directory section of this guide

for dimensions

DecoratorMatchingDoorsDeskCabinets

DMDBEA12

● Furniture Ends Option (FE) or WEP42 panel is recommended for installation

● Attaches to side of BEA12 or BEA12FH● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● Refer to the Parts Directory section of this guide

for dimensions

DecoratorMatchingDoorsBEA12BaseCabinets

DMDB


● Attaches to side of Base cabinet● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● Refer to the Parts Directory section of this guide

for dimensions

DecoratorMatchingDoorsBaseCabinets


NEL

S, F

ILLE

RS &

MO

LDIN

GS

174


DMDAPDMDAPT

● Full Overlay door styles feature one door● Dishwasher Insert Panel (DIP) required for

installation (order separately)● Attaches directly to Dishwasher Insert Panel● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● DMDAPT for use with appliances requiring tall

front panel(s)● Refertoappliancemanufacturer’s

specificationsforinstallationdetailsandheavydutyspringrequirementsondishwasherdoorswhenusingDecoratorMatchingDoors

DecoratorMatchingDoorsDishwashersFullOverlay

FOL A BDMDAP 20 9⁄16” 17 1⁄2”DMDAPT 20 9⁄16” 23 7⁄8”

DMDAPDMDAPT

● Partial Overlay door styles feature two doors● Dishwasher Insert Panel (DIP) required for

installation (order separately)● Attaches directly to Dishwasher Insert Panel● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● DMDAPT for use with appliances requiring tall

front panel(s)● Refertoappliancemanufacturer’s

specificationsforinstallationdetailsandheavydutyspringrequirementsondishwasherdoorswhenusingDecoratorMatchingDoors

DecoratorMatchingDoorsDishwashers

PartialOverlay

POL A BDMDAP 9 7⁄8” 16”DMDAPT 9 7⁄8” 22 3⁄8”

DMDT8412DMDT8424DMDT9012DMDT9024DMDT9612DMDT9624

● Furniture Ends Option (FE) or TEP84/TEP96 panel is recommended for installation

● Attaches to side of Utility or Oven cabinet● Matches style and color of cabinet doors● Panel thickness is 3⁄4”● 24” deep features four doors (as shown)● 12” deep features two doors● DMDT bottom doors have a center rail except White

Thermo Foil door styles (Annapolis, Charlottesville, Del Ray, Newport) and all Gettysburg door styles

● Refer to the Parts Directory section of this guide for dimensions

DecoratorMatchingDoorsTallCabinets


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

175


UF3UF6UF342UF642

OVSF3OVSF6OVSF396OVSF696

● 3⁄4” solid wood● Finished on front and all four edges● Field trimmable

UniversalFiller

A BUF3 3” 30 1⁄2”UF6 6” 30 1⁄2”UF342 3” 42 1⁄8” UF642 6” 42 1⁄8”OVSF3 3” 80”OVSF6 6” 80”OVSF396 3” 92”OVSF696 6” 92”

UF E3UF E342

● For wall or base application● 3⁄4” solid wood● Finished on front and all four edges● Field trimmable

UniversalFillerExtension

AUF E3 30 1⁄2”UF E342 42 1⁄8”

Fillers

Tofacilitateproperdooroperation,includeatleasta1”fillerbetweenthehingedsideofFullOverlaydoorstylesanddeeperadjacentobjectsincludingcabinets,walls,appliancesandcountertops.

PANELS, FILLERS & MOLDINGS: Fillers PA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

176


WOF312WOF315WOF318WOF321WOF324WOF327WOF330WOF336WOF342WOF630

WOF636WOF642DOF3BOF3VOF3

TOF384TOF390TOF396

● ForusewithFullOverlayWhiteThermoFoildoorstylesonly

● Outside profile matches door● All edges are finished● Indicate door style when ordering● Not field trimmable● MustbemountedtoaUniversalFiller

(orderseparately)

WhiteOverlayFiller

A BWOF312 2 5⁄8” 11 9⁄16”WOF315 2 5⁄8” 14 9⁄16”WOF318 2 5⁄8” 17 9⁄16”WOF321 2 5⁄8” 20”WOF324 2 5⁄8” 23 7⁄8”WOF327 2 5⁄8” 261⁄2”WOF330 2 5⁄8” 291⁄2”WOF336 2 5⁄8” 351⁄2”WOF342 2 5⁄8” 411⁄2”WOF630 5 5⁄8” 291⁄2”WOF636 5 5⁄8” 351⁄2”WOF642 5 5⁄8” 411⁄2”DOF3 2 5⁄8” 237⁄8”VOF3 2 5⁄8” 261⁄2”BOF3 2 5⁄8” 297⁄8”TOF384 2 5⁄8” 793⁄8”TOF390 2 5⁄8” 853⁄8”TOF396 2 5⁄8” 913⁄8”

WOF312WOF315WOF318WOF321WOF324WOF327WOF330WOF336WOF342

DOF3BOF3VOF3

TOF384TOF390TOF396

● ForusewithFullOverlaywooddoorstylesonly

● Outside profile matches door● All edges are finished● 3⁄4” solid wood● Indicate door style when ordering● Not field trimmable● MustbemountedtoaUniversalFiller

(orderseparately)

WoodOverlayFiller

A BWOF312 25⁄8” 119⁄16”WOF315 25⁄8” 149⁄16”WOF318 25⁄8” 179⁄16”WOF321 25⁄8” 20”WOF324 25⁄8” 23 7⁄8”WOF327 25⁄8” 26 1⁄2”WOF330 25⁄8” 29 1⁄2”WOF336 25⁄8” 35 1⁄2”WOF342 25⁄8” 41 1⁄2” DOF3 25⁄8” 23 7⁄8”VOF3 25⁄8” 26 1⁄2”BOF3 25⁄8” 29 7⁄8”TOF384 25⁄8” 79 3⁄8”TOF390 25⁄8” 85 3⁄8”TOF396 25⁄8” 91 3⁄8”

BOF3X3

● ForusewithFullOverlayWhiteThermoFoildoorstylesonly

● Outside profile matches door● All edges are finished● Indicate door style when ordering● Two pieces mitered on one edge● Not field trimmable●MustbemountedtoaBCF27BaseCorner

Filler(orderseparately)

BaseCornerOverlayFiller

BCF27

● 3⁄4” solid wood ● Finished on front and all four edges● Field trimmable

BaseCornerFiller

PANELS, FILLERS & MOLDINGS: Fillers

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

177


FlutedBeadedFillerReversible–6”Wide

FBF6FBF642FBF684FBF696

● Filler is fluted on one side and beaded on reverse● Finished on all sides● Field trimmable● 3⁄4” solid wood● Apply 6” wide decorative blocks for accent● Designer note: Ensure correct side is exposed

when installed

AFBF6 30 1⁄2”FBF642 42 1⁄8”FBF684 84”FBF696 96”

FlutedBeadedFillerExtensionReversible

FBF E3FBF E342

● For wall or base application● Filler is fluted on one side and beaded on reverse● Finished on all sides● Field trimmable● 3⁄4” solid wood● Apply 3” wide decorative blocks for accent● Designer note: Ensure correct side is exposed

when installed

AFBF E3 30 1⁄2”FBF E342 42 1⁄8”

FlutedBeadedFillerReversible–3”Wide

FBF3FBF342FBF384FBF396

● Filler is fluted on one side and beaded on reverse● Finished on all sides● Field trimmable● 3⁄4” solid wood● Apply 3” wide decorative blocks for accent● Designer note: Ensure correct side is exposed

when installed

AFBF3 30 1⁄2”FBF342 42 1⁄8”FBF384 84”FBF396 96”

PANELS, FILLERS & MOLDINGS: FillersPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

178


BaseColumnFiller

BBC32734 BFC32734 BPC32734

● 3” wide x 3⁄4” thick solid wood front ● Finished veneered sides are flush with face ● Reversible for left or right installation ● Top and bottom edges of returns are edge banded ● Field trimmable to any depth ● Field trimmable in height as noted below: • 32734 field trimmable to 31 1⁄8” or 28 1⁄2”

Plain(BPC)

Fluted(BFC)

Beaded(BBC)

TallColumnFiller

Plain(TPC)

Fluted(TFC)

Beaded(TBC)

● 3” wide x 3⁄4” thick solid wood front ● Finished veneered sides are flush with face ● Reversible for left or right installation ● Top and bottom edges of returns are edge banded ● Field trimmable to any depth ● Field trimmable in height as noted below:

• 32796 field trimmable to 90” • 32784 is not field trimmable in height

TBC32784 TBC32796 TFC32784 TFC32796 TPC32784TPC32796

WallColumnFiller

WBC31530 WBC31542WBC31560 WFC31530 WFC31542 WFC31560 WPC31530 WPC31542 WPC31560

● 3” wide x 3⁄4” thick solid wood front ● Finished veneered sides are flush with face ● Reversible for left or right installation ● Top and bottom edges of returns are edge banded ● Field trimmable to any depth ● Field trimmable in height as noted below:

• 31530 field trimmable to 27 1⁄8”, 24 1⁄2”, 20 5⁄8”,18 1⁄8”, 15 1⁄8” or 12 1⁄8”• 31542 field trimmable to 36 1⁄8”

• 31560 field trimmable to 48” or 54”

Plain(WPC)

Fluted(WFC)

Beaded(WBC)

PANELS, FILLERS & MOLDINGS: Fillers

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

179


● Apply to BEADED side of 3” reversible filler, reversible filler extension or beaded column filler

● Solid wood

BB3X3 PYRAMID

PyramidBlock–3”

Fluted

Beaded

● Apply to FLUTED side of 3” reversible filler, reversible filler extension or fluted column filler

● Solid wood

FB3X3 PYRAMID


● Solid wood

BB3X3 ROSETTE

RosetteBlock–3”

Fluted

Beaded


● Solid wood

FB3X3 ROSETTE

Decorative Blocks

PANELS, FILLERS & MOLDINGS: Decorative BlocksPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

180



● Solid wood

BB3X6 ASTER

AsterBlock–3”

Fluted

Beaded


● Solid wood

FB3X6 ASTER


● Solid wood

BB3X4 PLINTH

PlinthBlock–3”

Fluted

Beaded


● Solid wood

FB3X4 PLINTH

● Apply to BEADED side of 6” reversible filler● Solid wood

BB6X6 PLINTH

PlinthBlock–6”

Fluted

Beaded

● Apply to FLUTED side of 6” reversible filler● Solid wood

FB6X6 PLINTH

PANELS, FILLERS & MOLDINGS: Decorative Blocks

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

181


SCM8 WDSCM8 WD BLACK

● Wood door styles feature solid wood finished to match cabinet exterior

● White Thermo Foil door styles are Thermo Foil wrapped MDF

● 8 feet long

SoffitCrownMolding

SCVM8SCVM8 BLACK


● 8 feet long

SmallCoveMolding

CM8 WDCM8 WD BLACK



● 8 feet long

CrownMoldingMoldings

Boldlineindicatesfinishedsurfaces.

Individualsticksofmoldingaremadefromindividualpiecesofwoodandmayvaryincolor.

CCM8 VNRCCM8 VNR BLACK

● Wood door styles are veneer wrapped over solid wood core finished to match cabinet exterior


● May use CBE8, DM8 WD, RM8 WD, SWI8 or TBE8 as accent

● 8 feet long

ClassicCrownMolding

PANELS, FILLERS & MOLDINGS: MoldingsPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

182


ILR8ILR8 BLACK



● 8 feet long

InsetLightRailMolding

TLR8TLR8 BLACK



● 8 feet long

TraditionalLightRailMolding

LR8LR8 WDLR8 WD BLACK

● Wood door styles are veneer wrapped MDF finished to match cabinet exterior (LR8 WD)

● White Thermo Foil door styles are Thermo Foil wrapped MDF (LR8)

● 8 feet long

LightRailMolding

ACM8ACM8 BLACK



● 8 feet long

AngleCrownMolding

TCCM8 WDTCCM8 WD BLACK




● 8 feet long

TraditionalClassicCrownMolding

LCVM8LCVM8 BLACK


● 8 feet long

LargeCoveMolding

PANELS, FILLERS & MOLDINGS: Moldings

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

183


LBM8LBM8 BLACK


● May use EDM8 as accent● 8 feet long

LibraryMolding

CR8CR8 BLACK


● 8 feet long

ChairRailMolding

IVI8IVI8 BLACK


● Oak used for Hickory● 8 feet long

IvyInsertMolding

CTM8 WDCTM8 WD BLACK


● 8 feet long

CountertopEdgeMolding

MM6MM6 BLACK


● 6 feet long

MirrorMolding

PRM6 WDPRM6 WD BLACK


● 6 feet long

PlateRailMolding


NEL

S, F

ILLE

RS &

MO

LDIN

GS

184


RM8 WDRM8 WD BLACK


● May be used as accent on CCM8 VNR, TCCM8 WD and ILR8

● 8 feet long

RopeMolding

DM8 WDDM8 WD BLACK



● 8 feet long

DentilMolding

SDE8 WDSDE8 WD BLACK


● 8 feet long

SmallDentilInsertMolding

ASI8ASI8 BLACK



AcanthusInsertMolding

EDM8EDM8 BLACK


● Oak used for Hickory● May be used as accent on LBM8● 8 feet long

EggandDartMolding

LRM8 WDLRM8 WD BLACK


● 8 feet long

LargeRopeMolding


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

185


OGE8OGE8 BLACK


● 8 feet long

OgeeMolding

CBE8CBE8 BLACK




CenterBeadedInsertMolding

BM8 WDBM8 WD BLACK


● 8 feet long

BattenMolding

SWI8SWI8 BLACK




SwirlInsertMolding

TBE8TBE8 BLACK



● 8 feet long

TripleBeadEdgeMolding

SM8 WDSM8 WD BLACK


● 8 feet long

ScribeMolding


NEL

S, F

ILLE

RS &

MO

LDIN

GS

186


TBM8TBM8 BLACK


● 8 feet long

TripleBeadMolding

DPM8 WDDPM8 WD BLACK


● 8 feet long

DentilPilasterMolding

OGP8OGP8 BLACK



● For use in furniture toe, light rail or top molding applications

● 8 feet long

OgeePilasterMolding

SAM8 WDSAM8 WD BLACK


● May be used as accent on Wall China, Wine Storage and Base Microwave cabinets

● 8 feet long

ShakerAccentMolding

SBAM8 WDSBAM8 WD BLACK



● 8 feet long

SingleBeadAccentMolding

TBAM8 WDTBAM8 WD BLACK



● 8 feet long

TripleBeadAccentMolding


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

187


SBM8SBM8 BLACK


● 8 feet long

SingleBeadMolding

QM8 WDQM8 WD BLACK


● 8 feet long

InsideCornerMolding

ICM8ICM8 BLACK


● 8 feet long

DecorativeInsideCornerMolding

SSBM8SSBM8 BLACK

● SSBM8 molding can be used as shown above to align a wall cabinet on toe with an adjacent base cabinet to achieve a full height door appearance

SmallSingleBeadMolding


● 8 feet long


● 8 feet long

OutsideCornerMolding

OCM8OCM8 BLACK


NEL

S, F

ILLE

RS &

MO

LDIN

GS

188


CAM8CAM8 BLACK


● Used in corner application to place cabinet at 45 degree angle

● Cannot be installed on cabinets with the Furniture Ends Option

● 8 feet long

CabinetAngleMolding

QR8QR8 BLACK


● 8 feet long

QuarterRoundMolding

AOSC8AOSC8 BLACK


● 8 feet long

AngledOutsideCornerMolding

WBM8WBM8 BLACK


● 8 feet long

WideBattenMolding

UM8 WDUM8 WD BLACK


● 8 feet long

StraightTrimMolding


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

189


BTK8 WD


● Features 3⁄16” veneered plywood finished on one side to match cabinet exterior

● Putty Stick and TU Marker are recommended for exposed ends

BaseToeKick(WD)Toe Kicks

BTK8 PRT


● Features 3⁄16” roll-coated industrial substrate finished on one side to match cabinet exterior

● Putty Stick and TU Marker are recommended for exposed ends

BaseToeKick(PRT)

PANELS, FILLERS & MOLDINGS: Toe KicksPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

190


ATL

● Solid wood● Wood door styles are finished to match

cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Designed as toe kick accent

AccentTurnedLeg


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Field trimmable to 4” high

FrenchCarvedLeg

FCL

Posts, Legs & Decorative Items


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Field trimmable to 4” high

TaperedLeg

TPL

BTL


cabinet exterior● White Thermo Foil door styles are painted white● Field trimmable to 28 1⁄2” high

BaseTurnedLeg

PANELS, FILLERS & MOLDINGS: Posts, Legs & Decorative Items

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

191


FullTurnedPostBeaded

POST234 B

● Solid wood with beaded round post● Wood door styles are finished to match

cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Field trimmable to 28 1⁄2” high

POST234 F

● Solid wood with fluted round post● Wood door styles are finished to match

cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Field trimmable to 28 1⁄2” high

FullTurnedPostFluted

SPLT POST80 BSPLT POST80 FSPLT POST80 P


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Field trimmable● Use with Traditional Split Blocks and Collar to

create design element● MustbemountedtoaUniversalFiller

(orderseparately)

SplitPost

Beaded(B)

Fluted(F)

Plain(P)

PANELS, FILLERS & MOLDINGS: Posts, Legs & Decorative ItemsPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

192


SPLT COLLAR T


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Use with Split Post and 6” or 10” Traditional Split

Block to create design element● MustbemountedtoaUniversalFiller

(orderseparately)

TraditionalSplitCollar

SPLT BLOCK26 T


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● For floor or wall application ● Use with Split Post, 6” or 10” Traditional Split Block

and Traditional Split Collar to create design element● MustbemountedtoaUniversalFiller

(orderseparately)

TraditionalSplitBlock–6”

SPLT BLOCK210 T


cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● For floor application ● Use with Split Post, 6” Traditional Split Block and

Traditional Split Collar to create design element● MustbemountedtoaUniversalFiller

(orderseparately)

TraditionalSplitBlock–10”

SuggestedDesignApplications


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

193


RC313

● Carved solid wood● Wood door styles are finished to match

cabinet exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Recessed mounting clips included

LargeRosetteCorbel

RC58



SmallRosetteCorbel

LSO


cabinet exterior● Beech used for Oak and Hickory● White Thermo Foil door styles are painted white

LargeShellOrnament

SHPO



ShellOnlay

SSO



SmallShellOrnament


NEL

S, F

ILLE

RS &

MO

LDIN

GS

194


GC313



LargeGrapeCorbel

GC58



SmallGrapeCorbel

LGO



LargeGrapeOrnament

GRPO



GrapeOnlay

SGO



SmallGrapeOrnament


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

195


AC313



LargeAcanthusCorbel

AC58



SmallAcanthusCorbel

TASC



TallAcanthusCapital

ASPO



AcanthusOnlay

ASC



AcanthusCapital


NEL

S, F

ILLE

RS &

MO

LDIN

GS

196


ALO


cabinet exterior● Beech used for Oak and Hickory● Maple used for Cherry● White Thermo Foil door styles are painted white

AcanthusLeafOnlay

CC29

● Carved solid wood● Wood door styles are finished to match cabinet

exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Recessed mounting clips included

SmallCoveCorbel

CC212

● Carved solid wood● Wood door styles are finished to match cabinet

exterior● Oak used for Hickory● White Thermo Foil door styles are painted white● Recessed mounting clips included

LargeCoveCorbel

CS12

● Field installation accessory● Decorative counter support● All door styles feature 5⁄8“ solid wood finished to


CounterSupport


PAN

ELS,

FIL

LERS

& M

OLD

ING

S

197


DDF FASTENER

● For installation of one dummy drawer front ● Kit features: • Two sets of DDF Fasteners • Eight screws • One Instruction Sheet ● Please refer to cabinet specifications as some

cabinets will require more than one kit

DummyDrawerFrontFastener

SCREW INST 2.5 BX100Box of 100

COVER CAP TANCOVER CAP WHTBag of 50

● Installation screws are Phillips panhead 2 1⁄2” long

● Cover caps used to conceal head of installation screw

Screws&ScrewCoverCaps

SHELF REST METAL 4PK(Package of 4 – Wall Cabinetsor Bookshelves)

SHELF REST METAL 12(Package of 12 – Wall Cabinetsor Bookshelves)

SHELF REST MFD PK(Package of 8 – MFD Cabinets)

CLIP LOCK 3/4 4 PK(Package of 4 – Base or Tall Cabinets)

● Metal and MFD shelf rests are nickel plated steel● MFD shelf rests are six position adjustable for

alignment of shelf with mullion● Clip Lock shelf rests are molded clear

high-strength polycarbonate

ShelfRests

Metal

MFD Clip Lock

Installation Items

CUSH CLOSE DR BUFFER

● Field installation accessory● Slow closing system helps reduce slams and noise● Package includes one unit and installation

instructions● Pre-drilling of face frames recommended● One unit per door recommended for doors up to

30” high● Two units per door recommended for doors 36”

and higher● Spacer included for Partial Overlay door styles● NotforuseonfollowingSKUs:BEA12,BER,

BFP3,BPP9,BTDP9,BWBT,BSS,CAR,DWBT,VWBT,WEA,WER,orWFP

CushionCloseforDoors

PANELS, FILLERS & MOLDINGS: Installation ItemsPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

198


● STAIN PINT (QUART) for use on standard finishes, including Maple Linen● STAIN GLAZED PINT (QUART) for use on premium finishes, excluding

Maple Linen● STAINTOPCOATstronglyrecommendedforapplicationover

ALLfinishes(orderseparately)● STAIN GLAZED includes STAIN PINT and two STAIN GLAZED PENS per pint● STAIN GLAZED PENS available for order separately (quantity of two)● Indicate species and finish when ordering● PINT covers approximately 40 square feet● QUART covers approximately 80 square feet● Instructions included

STAIN PINTSTAIN QUARTSTAIN GLAZED PINTSTAIN GLAZED QUARTSTAIN GLAZED PENSSTAIN TOP COAT PINTSTAIN TOP COAT QUART

Stain

PuttyStick&Marker

FinishColor PuttyStick TUMarkerCherry Bordeaux PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Cherry Chocolate PUTTY STICK EXT QTY2 TU MARKER EXT QTY3CherryJava PUTTY STICK EXT QTY1 TU MARKER EXT QTY1Cherry Spice PUTTY STICK EXT QTY2 TU MARKER EXT QTY1Hickory Natural PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Hickory Spice PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Maple Auburn PUTTY STICK EXT QTY1 TU MARKER EXT QTY2Maple Butterscotch PUTTY STICK EXT QTY1 TU MARKER EXT QTY2Maple Coffee PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Maple Cognac PUTTY STICK EXT QTY1 TU MARKER EXT QTY1Maple Cream PUTTY STICK EXT QTY1 TU MARKER EXT QTY2MapleHazelnut PUTTY STICK EXT QTY1 TU MARKER EXT QTY2Maple Honey PUTTY STICK EXT QTY2 TU MARKER EXT QTY1Maple Linen PUTTY STICK EXT QTY1 TU MARKER EXT QTY1Maple Mocha PUTTY STICK EXT QTY1 TU MARKER EXT QTY2Maple Natural PUTTY STICK EXT QTY2 TU MARKER EXT QTY1Maple Spice PUTTY STICK EXT QTY1 TU MARKER EXT QTY1Oak Honey PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Oak Natural PUTTY STICK EXT QTY3 TU MARKER EXT QTY1Oak Tawny PUTTY STICK EXT QTY2 TU MARKER EXT QTY2Black PUTTY STICK BLACK TU MARKER BLACKInterior PUTTY STICK INTERIOR TU MARKER INTERIORWhite PUTTY STICK EXT QTY1 TU MARKER EXT QTY1

PUTTY STICK BLACKPUTTY STICK EXT QTY1PUTTY STICK EXT QTY2PUTTY STICK EXT QTY3PUTTY STICK INTERIOR

TU MARKER BLACKTU MARKER EXT QTY1TU MARKER EXT QTY2TU MARKER EXT QTY3TU MARKER INTERIOR

● Indicate species and finish when ordering

● Refer to chart to order correct QTY● Putty Stick – for filling minor

dents, gouges and scratches made during or after installation

● Touch Up Marker – adds color to minor surface scratches

SPRAY STAIN CLEARSPRAY STAIN TINTEDSPRAY STAIN WHITE

● SPRAY STAIN TINTED available for wood door styles excluding Maple Auburn, Maple Cognac and all Cherry finishes

● SPRAY STAIN WHITE for all white Thermo Foil door styles and white face frames

● SPRAY STAIN CLEAR for use as top coat for all door styles

● Indicate species and finish when ordering● 11 ounce aerosol spray can

SprayStain

PANELS, FILLERS & MOLDINGS: Installation Items

PAN

ELS,

FIL

LERS

& M

OLD

ING

S

199


PANELS, FILLERS & MOLDINGS: NotesPA

NEL

S, F

ILLE

RS &

MO

LDIN

GS

200


Decorative Hardware

DEC

ORA

TIVE

HAR

DW

ARE

201

•ForSavannahdoorstyles,pullsarenotrecommendedforany12”drawer

•ForSavannahdoorstyles,PULL3328BT,PULL3311VB,PULL3337RB,PULL3124SNandPULL3360SNarenotrecommendedfor12”or15”drawers

•PULL3370SNisnotrecommendedforany12”drawerOR15”and18”drawersforSavannahdoorstyles

•PULL3105SNandPULL3217ABarenotrecommendedforGettysburg,SavannahandTownsenddoorstyles

•AmericanWoodmarkdoesnotrecommenddrillingthroughanydoor/drawerjointforinstallationofdecorativehardware

•Dooranddrawerfrontsmustbeadjustedbeforeinstallingdecorativehardware

Forged

Small Forged KnobKNOB 3221F

Square Forged KnobKNOB 3222F

Large Forged PullsPULL 3220F

33⁄4” Center

Classic Pull Patina sPULL 3172P

3” Center

Classic Knob PatinaKNOB 3173P

Classic

Classic Pull GraphitesPULL 3172G

3” Center

Classic Knob GraphiteKNOB 3173G

Classic Pull Satin Nickel sPULL 3172SN

3” Center

Classic Knob Satin NickelKNOB 3173SN

Classic Pull Satin BrasssPULL 3172SB

3” Center

Classic Knob Satin Brass KNOB 3173SB

Button Knob PatinaKNOB 3213P

Button

Button Knob Graphite KNOB 3213G

Button Knob Satin BrassKNOB 3213SB

Button Knob Satin NickelKNOB 3213SN

Tansu

Small Tansu Pull Venetian BronzesPULL 3331VB

33⁄4” Center

Tansu Knob Venetian BronzeKNOB 3330VB

Large Tansu Pull Venetian BronzesPULL 3332VB

5” Center

DEC

ORA

TIVE

HAR

DW

ARE

202

sForrestrictionsrefertopage201

DECORATIVE HARDWARE: Knobs & Pulls

Twist

Twist Pull French Nickel sPULL 3101FN

5” Center

Twist Knob French NickelKNOB 3102FN

Twist Pull Venetian BronzesPULL 3101VB

5” Center

Twist Knob Venetian BronzeKNOB 3102VB

Barrel

Suffolk

Suffolk Knob Brushed TinKNOB 3327BT

Suffolk Twist Pull Brushed TinsPULL 3328BT

5” Center

Small Barrel Pull Antique Pewter CoppersPULL 3078APC

33⁄4” Center

Large Barrel Pull Venetian BronzesPULL 3079VB

5” Center

Small Barrel Pull Venetian BronzesPULL 3078VB

33⁄4” Center

Large Barrel Pull Antique Pewter CoppersPULL 3079APC

5” Center

Beveled Knob Venetian BronzeKNOB 3103VB

Beveled Knob Antique Pewter CopperKNOB 3103APC

Beveled

Beveled Knob Iron OxideKNOB 3103IO

Beveled Knob Pewter KNOB 3103PW

Beveled Knob French NickelKNOB 3103FN

Craftsman

Beveled Knob Matte BlackKNOB 3103MB

Craftsman Pull Matte Black sPULL 3104MB

3” Center

Rustic

Rustic Knob Rubbed BronzeKNOB 3336RB

Rustic Pull Rubbed BronzesPULL 3337RB

5” Center

DEC

ORA

TIVE

HAR

DW

ARE

203

American Woodmark Designer’s Choice Specification GuidesForrestrictionsrefertopage201


Flat Contour Pull Weathered NickelsPULL 3230WN

33⁄4” Center

Flat Contour Pull Oiled BronzesPULL 3230OB

33⁄4” Center

Bar

Flat Contour Pull Satin NickelsPULL 3230SN

33⁄4” Center

Slotted, Cup & Toggle

Small Slotted Steel Pull Satin NickelsPULL 3123SN

3” Center

Large Slotted Steel Pull Satin NickelsPULL 3124SN

5” Center

Toggle Knob Satin NickelKNOB 3239SN

Cup Pull Satin NickelsPULL 3105SN

3” Center

Flat Contour

Rope

Rope Knob Satin NickelKNOB 3231SN

Rope Knob Oiled BronzeKNOB 3231OB

Rope Knob Weathered NickelKNOB 3231WN

Steel Bow & Crescent

Steel Bow Pull Satin Nickels PULL 3129SN

5” Center

Steel Bow Pull Venetian BronzesPULL 3129VB

5” Center

Crescent Pull Venetian BronzesPULL 3311VB

5” Center

Large Bar Pull Satin NickelsPULL 3370SN

11 1⁄4” Center

Medium Bar Pull Satin NickelsPULL 3360SN

6 1⁄4” Center

Small Bar Pull Satin NickelsPULL 3350SN

3” Center


DEC

ORA

TIVE

HAR

DW

ARE

204 DECORATIVE HARDWARE: Knobs & Pulls

Large Parquet Knob BlackKNOB 3322B

Ceramic & Wooden


Fluted, Roundel & Four-Square

Four-Square Knob Antique CreamKNOB 3345CRM

Fluted Pull Antique CreamsPULL 3342CRM

33⁄4” Center

Fluted Knob Antique CreamKNOB 3341CRM

Roundel Knob Antique CreamKNOB 3340CRM

Eclipse & Pyramid

Pyramid Knob Satin NickelKNOB 3399SN

Eclipse Knob Satin NickelKNOB 3391SN

Parquet

Small Parquet Knob BlackKNOB 3321B

Oak Leaf Pull Antique BronzesPULL 3218AB

3” Center

Oak Leaf Knob Antique Bronze KNOB 3216AB

Oak Leaf Cup Pull Antique BronzesPULL 3217AB3” or 33⁄4” Center

Oak Leaf

Ceramic White Mushroom Knob KNOB 3191CW

Wooden KnobKNOB 3191__

Cherry Bordeaux KNOB 3191CHY BCherry Chocolate KNOB 3191CHY SCherryJava KNOB3191CHYJAVCherry Spice KNOB 3191CHY SHickory Natural* KNOB 3191HIC NHickory Spice* KNOB 3191HIC SMaple Auburn KNOB 3191MAP COGMaple Butterscotch KNOB 3191MAP SLKMaple Coffee KNOB 3191MAP HMaple Cognac KNOB 3191MAP COGMaple Cream KNOB 3191MAP SLKMapleHazelnut KNOB3191MAPSLKMaple Honey KNOB 3191MAP HMaple Linen KNOB 3191MAP LINMaple Mocha KNOB 3191MAP SMaple Natural KNOB 3191MAP NMaple Spice KNOB 3191MAP SOak Honey KNOB 3191OAK HOak Natural KNOB 3191OAK NOak Tawny KNOB 3191OAK T

*Oak used for Hickory DEC

ORA

TIVE

HAR

DW

ARE

205



Parts DirectoryWall Cabinets Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 With Spice Rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 Blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Blind Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Peninsula Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Wall Easy Reach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Wall End Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Microwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218

Glass Insert Sizes & Nomenclature. . . . . . . . . . . . . . . . . . . . 219

Base Cabinets Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 With Full Height Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 With Deep Roll Out Trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 With Door Accessory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 With Roll Out Tray Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 With Factory Installed Wastebaskets . . . . . . . . . . . . . . . . . . . . . 226 Base Pot and Pan Organizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 Peninsula. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 With Factory Installed Chopping Block Kit . . . . . . . . . . . . . . . . . 228 With Factory Installed Cutlery Divider Kit . . . . . . . . . . . . . . . . . 230 With Factory Installed Cutting Center Kit . . . . . . . . . . . . . . . . . . 232 With Factory Installed Knife Section Kit . . . . . . . . . . . . . . . . . . . 234 With Factory Installed Knife Section Cutting Center Kit . . . . . . . 236 With Factory Installed Molded Plastic Cutlery Divider Kit. . . . . . 238 With Factory Installed Spice Drawer Insert Kit . . . . . . . . . . . . . . 240 With Factory Installed Wood Tiered Cutlery Divider Kit . . . . . . . 242 Blind Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Blind Peninsula Corner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Base End Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Drawer Base Cabinets Base Spice Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 Spice Drawer Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 Three Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 Three Drawer With Factory Installed Drawer Organizer . . . . . . . 246 Base Microwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 Four Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 Four Drawer With Factory Installed Drawer Organizer . . . . . . . . 248

Sink Base Cabinets Corner Sink Base, Corner Sink Front. . . . . . . . . . . . . . . . . . . . . . 250 Deep Sink Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Sink/Range Base and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Sink with Factory Installed Tilt-Out Tray(s) . . . . . . . . . . . . . . . . . 250 Sink Base Multi-Storage Cabinet . . . . . . . . . . . . . . . . . . . . . . . . 250

Corner Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Desk & Office Cabinets With Factory Installed Wastebasket(s) . . . . . . . . . . . . . . . . . . . . 244 Desk Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 File Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Kneehole Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Desk Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Tall Cabinets Single Oven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 Single Oven with Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 Double Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 Utility With Adjustable Shelves . . . . . . . . . . . . . . . . . . . . . . . . . 256 Utility With Deep Roll Out Trays . . . . . . . . . . . . . . . . . . . . . . . . 258 Utility With Pantry Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260

Vanity Cabinets Medicine Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Tri-View Mirror. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Valet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Vanity Linen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 Vanity Base 31 1⁄8” High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 With Factory Installed Wastebasket 31 1⁄8” High. . . . . . . . . . . . . 264 Vanity Sink Base With Top Drawers 31 1⁄8” High . . . . . . . . . . . . . 264 Vanity Combo Sink Base 31 1⁄8” High . . . . . . . . . . . . . . . . . . . . . 264 Vanity Base 34 1⁄2” High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 With Factory Installed Wastebasket 34 1⁄2” High. . . . . . . . . . . . . 266 Vanity Sink Base With Top Drawers 34 1⁄2” High . . . . . . . . . . . . . 266 Vanity Combo Sink Base 34 1⁄2” High . . . . . . . . . . . . . . . . . . . . . 266 Vanity Sink Base 31 1⁄8” High . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Vanity Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Vanity Sink Base 34 1⁄2” High . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Vanity Drawer Base 31 1⁄8” High . . . . . . . . . . . . . . . . . . . . . . . . . 269 Vanity Drawer Base 34 1⁄2” High . . . . . . . . . . . . . . . . . . . . . . . . . 269

Accessories Decorator Matching Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

PART

S: D

IREC

TORy

206

DOOR NOMENCLATURE LEGENDAll Doors Square (DR, DRV, DRMF, DROF) doors are hinged left, invert for right hinging

Example: DR1230

Cathedral (DR, DRMF, DROF) Doors must be ordered hinged left or rightExample: DR1230 CATH L

DR__ Door (Wall, Base, Desk, Base Height Vanity, Tall)DR__ V Standard Height Vanity Door DRMF__ Mullion Frame Door (Wall Cabinet, Utility/Vanity Linen top doors only)DROF__ Open Frame Door (Wall Cabinet, Utility/Vanity Linen top doors only)

DRAWER/PANEL FRONT NOMENCLATURE LEGENDDDF__ Drawer/Panel Front for Base, Desk or Vanity cabinetDDF__M Large Drawer Front for Full Overlay cabinetDDF__D Large Drawer Front for Partial Overlay cabinetDDF__VD Large Drawer Front for Full Overlay standard height Vanity cabinetDDFOV__ Drawer Front for Full Overlay Oven cabinetDDFKDC__ Drawer Front for Kneehole Drawer cabinet

ADJUSTABLE SHELVING NOMENCLATURE LEGEND

__SHELF 3/4”Adjustable Shelf - Standard Construction 3⁄4”Example: 12” SHELF 3/4

__SHELF MIFor Matching Interior 3⁄4” Adjustable Shelving, replace 3⁄4” with MIExample: 12” SHELF MI

__SHELF PLYFor All Plywood Construction 3⁄4” Adjustable Shelving, replace 3⁄4” with PLY

Example: 12” SHELF PLY

__SHELF MI PLYFor All Plywood Construction 3⁄4” Matching Interior Adjustable Shelving, replace 3⁄4” with MI PLYExample: 12” SHELF MI PLY

MI and PLY Shelving NOT available for Cabinets without Matching Interior (MI) and/or All Plywood Construction (APC) Options Refer to product SKU box for details

For MI, RD or PLY Shelving for Tall Cabinets (Vanity Linen, Utility, Oven) add attachments in 20-20 through Attributes, Add-Ons

PARTS DIRECTORy: Legend

PART

S: L

EGEN

D

207

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y

DOOR ADJUSTABLE SHELF

SKU Qty †Part Name Dimensions

23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

Full Overlay Partial Overlay*For All Plywood Construction or

Matching Interior Adjustable Shelf, refer to Parts Directory legend

Dimensions Qty *Part Name Dimensions

†Cathedral door styles must be ordered hinged left or right

STANDARDWALL•42”HIGH W942 1 DR942 8 9/16” x 41 1/2” 6 7/8” x 40” 3 9’’ SHELF 3/4 7 1/4” x 10 1/4” x 3/4”

W1242 1 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 12’’ SHELF 3/4 10 1/4” x 10 1/4” x 3/4”

W1542 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 15’’ SHELF 3/4 13 1/4” x 10 1/4” x 3/4”

W1842 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2142 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”

W2442 BUTT 2 DR1242 BUTT 11 3/4” x 41 1/2” 10 15/16” x 40” 3 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”


W3042 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

W3342 2 DR1642 16 1/16” x 41 1/2” 14 3/8” x 40” 3 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3642 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”


W1236 1 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 12’’ SHELF 3/4 10 1/4” x 10 1/4” x 3/4”

W1536 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 15’’ SHELF 3/4 13 1/4” x 10 1/4” x 3/4”

W1836 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2136 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”



W3036 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

W3336 2 DR1636 16 1/16” x 35 1/2” 14 3/8” x 34” 2 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3636 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”


W1230 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 12’’ SHELF 3/4 10 1/4” x 10 1/4” x 3/4”

W1530 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 15’’ SHELF 3/4 13 1/4” x 10 1/4” x 3/4”

W1830 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2130 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”

W2430 1 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”



W3030 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

W3330 2 DR1630 16 1/16” x 29 1/2” 14 3/8” x 28” 2 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3630 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

W3930 2 DR1930 19 1/16” x 29 1/2” 17 3/8” x 28” 2 39’’ SHELF 3/4 37 1/4” x 10 1/4” x 3/4”

W4230 2 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 42’’ SHELF 3/4 40 1/4” x 10 1/4” x 3/4”

W4530 3 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 45’’ SHELF 3/4 43 1/4” x 10 1/4” x 3/4”

W4830 2 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 48’’ SHELF 3/4 46 1/4” x 10 1/4” x 3/4”


W3327 2 DR1627 16 1/16” x 26 1/2” 14 3/8” x 25” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3627 2 DR1827 17 9/16” x 26 1/2” 15 7/8” x 25” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

PART

S: W

ALL

CABI

NET

S208 PARTS DIRECTORy: Wall Cabinets

23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y

s DGI_BS NOT AVAILABLE FOR 35 OR 38 DOOR STYLES — USE DGI_S

OPEN FRAME DOOR

Same Dimensions as Standard Door

DECORATIVE GLASS INSERTMULLION FRAME DOOR

SKU Qty †Part Name †Part Name


Part Name Dimensions Part Name Dimensions

†Cathedral door styles must be ordered hinged left or right American Woodmark Designer’s Choice Parts Directory

STANDARDWALL•42”HIGH W942 N/A N/A N/A N/A

W1242 1 DRMF1242 DROF1242 DGI-1242F 7 9/16” x 37 1/2” DGI-1242S 6 5/16” x 36 3/8”




W2442 BUTT 2 DRMF1242 BUTT DROF1242 BUTT DGI-1242F 7 9/16” x 37 1/2” sDGI-1242BS s7 3/8” x 36 3/8”




















W2430 N/A N/A N/A N/A













PART

S: W

ALL

CABI

NET

S

209PARTS DIRECTORy: Wall Cabinets


D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V




STANDARDWALL•24”HIGH W1224 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12’’ SHELF 3/4 10 1/4” x 10 1/4” x 3/4”

W1524 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15’’ SHELF 3/4 13 1/4” x 10 1/4” x 3/4”

W1824 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2124 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”

W2424 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”

W2724 BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 27’’ SHELF 3/4 25 1/4” x 10 1/4” x 3/4”

W3024 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

W3324 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3624 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

W3924 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 1 39’’ SHELF 3/4 37 1/4” x 10 1/4” x 3/4”

W4224 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 42’’ SHELF 3/4 40 1/4” x 10 1/4” x 3/4”

W4524 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45’’ SHELF 3/4 43 1/4” x 10 1/4” x 3/4”

STANDARDWALL•21”HIGH W3021 2 DR1521 14 9/16” x 20” 12 7/8” x 18 1/2” N/A

W3321 2 DR1621 16 1/16” x 20” 14 3/8” x 18 1/2” N/A

W3621 2 DR1821 17 9/16” x 20” 15 7/8” x 18 1/2” N/A

STANDARDWALL•18”HIGH W1818 1 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A

W2118 1 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” N/A

W2418 BUTT 2 DR1218 BUTT 11 3/4” x 17 1/2” 10 15/16” x 16” N/A

W2718 BUTT 2 DR1318 BUTT 13 1/4” x 17 1/2” 12 7/16” x 16” N/A

W3018 2 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” N/A

W3318 2 DR1618 16 1/16” x 17 1/2” 14 3/8” x 16” N/A

W3618 2 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A

W3918 2 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” N/A

1 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16”

W4218 2 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” N/A


W3315 2 DR1615 16 1/16” x 14 1/2” 14 3/8” x 13” N/A

W3615 2 DR1815 17 9/16” x 14 1/2” 15 7/8” x 13” N/A

W3915 2 DR1815 17 9/16” x 14 1/2” 15 7/8” x 13” N/A


W3312 2 DR1612 16 1/16” X 11 1/2” 14 3/8” X 10” N/A

W3612 2 DR1812 17 9/16” x 11 1/2” 15 7/8” x 10” N/A

W3912 2 DR1812 17 9/16” x 11 1/2” 15 7/8” x 10” N/A

WALLWITHSPICERACK•42”HIGH W1542 SR 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 15’’ SHELF 3/4 13 1/4” x 10 1/4” x 3/4”

W1842 SR 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2142 SR 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”


W1836 SR 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2136 SR 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”


W1830 SR 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 18’’ SHELF 3/4 16 1/4” x 10 1/4” x 3/4”

W2130 SR 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 21’’ SHELF 3/4 19 1/4” x 10 1/4” x 3/4”

PART

S: W

ALL

CABI

NET



23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR






American Woodmark Designer’s Choice Parts Directory

STANDARDWALL•24”HIGH W1224 1 DRMF1224 DROF1224 DGI-1224F 7 9/16” x 19 7/8” DGI-1224S 6 5/16” x 18 3/4”























1 DRMF1518 DROF1518 DGI-1518F 10 9/16” x 13 1/2” DGI-1518S 9 5/16” x 12 3/8”










WALLWITHSPICERACK•42”HIGH W1542 SR N/A N/A N/A N/A

W1842 SR N/A N/A N/A N/A








PART

S: W

ALL

CABI

NET

S



D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V




PENINSULAWALL•42”HIGH PW2442 BUTT 4 DR1242 BUTT 11 3/4” x 41 1/2” 10 15/16” x 40” 3 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”

PW3042 4 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 30’’ SHELF PW 3/4 28 1/4” x 10 1/4” x 3/4”


PENINSULAWALL•36”HIGH PW2436 BUTT 4 DR1236 BUTT 11 3/4” x 35 1/2” 10 15/16” x 34” 2 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”



PENINSULAWALL•30”HIGH PW1230 2 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 12’’ SHELF PW 3/4 10 1/4” x 10 1/4” x 3/4”







PENINSULAWALL•27”HIGH PW3027 4 DR1527 14 9/16” x 26 1/2” 12 7/8” x 25” 1 30’’ SHELF PW 3/4 28 1/4” x 10 1/4” x 3/4”


PENINSULAWALL•24”HIGH PW1224 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12’’ SHELF PW 3/4 10 1/4” x 10 1/4” x 3/4”

PW1824 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18’’ SHELF PW 3/4 16 1/4” x 10 1/4” x 3/4”

PW2424 BUTT 4 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”




PENINSULAWALL•21”HIGH PW3021 4 DR1521 14 9/16” x 20” 12 7/8” x 18 1/2” N/A

PW3621 4 DR1821 17 9/16” x 20” 15 7/8” x 18 1/2” N/A

PENINSULAWALL•18”HIGH PW1818 2 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A

PW2418 BUTT 4 DR1218 BUTT 11 3/4” x 17 1/2” 10 15/16” x 16” N/A

PW3018 4 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” N/A

PW3618 4 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A

PW4218 4 DR2118 20 9/16” x 17 1/2” 18 7/8” x 16” N/A

PART

S: W

ALL

CABI

NET



23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR







PENINSULAWALL•42”HIGH PW2442 BUTT 4 DRMF1242 BUTT DROF1242 BUTT DGI-1242F 7 9/16” x 37 1/2” sDGI-1242BS s7 3/8” x 36 3/8”

PW3042 4 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”


PENINSULAWALL•36”HIGH PW2436 BUTT 4 DRMF1236 BUTT DROF1236 BUTT DGI-1236F 7 9/16” x 31 1/2” sDGI-1236BS s7 3/8” x 30 3/8”



PENINSULAWALL•30”HIGH PW1230 2 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”



PW2430 N/A N/A N/A N/A




PENINSULAWALL•27”HIGH PW3027 N/A N/A N/A N/A




PW2424 BUTT 4 DRMF1224 BUTT DROF1224 BUTT DGI-1224F 7 9/16” x 19 7/8” sDGI-1224BS s7 3/8” x 18 3/4”




PENINSULAWALL•21”HIGH PW3021 N/A N/A N/A N/A



PW2418 BUTT 4 DRMF1218 BUTT DROF1218 BUTT DGI-1218F 7 9/16” x 13 1/2” sDGI-1218BS s7 3/8” x 12 3/8”




PART

S: W

ALL

CABI

NET

S



D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V




BLINDWALL•42”HIGH BLW24/2742 1 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”

BLW30/3342 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

BLW33/3642 1 DR2142 20 9/16” x 41 1/2” 18 7/8” x 40” 3 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

BLW36/3942 BUTT 2 DR1242 BUTT 11 3/4” x 41 1/2” 10 15/16” x 40” 3 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”



BLW30/3336 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

BLW33/3636 1 DR2136 20 9/16” x 35 1/2” 18 7/8” x 34” 2 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”




BLW27/3030 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 27’’ SHELF 3/4 25 1/4” x 10 1/4” x 3/4”

BLW30/3330 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

BLW33/3630 1 DR2130 20 9/16” x 29 1/2” 18 7/8” x 28” 2 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

BLW36/3930 1 DR2430 23 9/16” x 29 1/2” 21 7/8” x 28” 2 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”


BLW42/4530 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 42’’ SHELF 3/4 40 1/4” x 10 1/4” x 3/4”

BLW45/4830 2 DR1630 16 1/16” x 29 1/2” 14 3/8” x 28” 2 45’’ SHELF 3/4 43 1/4” x 10 1/4” x 3/4”

BLW48/5130 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 2 48’’ SHELF 3/4 46 1/4” x 10 1/4” x 3/4”

BLINDWALL•24”HIGH BLW24/2724 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF 3/4 22 1/4” x 10 1/4” x 3/4”

BLW27/3024 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 27’’ SHELF 3/4 25 1/4” x 10 1/4” x 3/4”

BLW30/3324 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

BLW33/3624 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

BLW36/3924 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

BLINDPENINSULAWALL BLPW2442 BUTT 1 DR1242 11 9/16” x 41 1/2” 9 7/8” x 40” 3 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”

2 DR1242 BUTT 11 3/4” x 41 1/2” 10 15/16” x 40”

BLPW2436 BUTT 1 DR1236 11 9/16” x 35 1/2” 9 7/8” x 34” 2 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”

2 DR1236 BUTT 11 3/4” x 35 1/2” 10 15/16” x 34”

BLPW2430 BUTT 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 2 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”

2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28”

BLPW2424 BUTT 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 24’’ SHELF PW 3/4 22 1/4” x 10 1/4” x 3/4”

2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8”

PART

S: W

ALL

CABI

NET



23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR







BLINDWALL•42”HIGH BLW24/2742 1 DRMF1242 DROF1242 DGI-1242F 7 9/16” x 37 1/2” DGI-1242S 6 5/16” x 36 3/8”

BLW30/3342 1 DRMF1842 DROF1842 DGI-1842F 13 9/16” x 37 1/2” DGI-1842S 12 5/16” x 36 3/8”


BLW36/3942 BUTT 2 DRMF1242 BUTT DROF1242 BUTT DGI-1242F 7 9/16” x 37 1/2” sDGI-1242BS s7 3/8” x 36 3/8”











BLW36/3930 N/A N/A N/A N/A










BLINDPENINSULAWALL BLPW2442 BUTT 1 DRMF1242 DROF1242 DGI-1242F 7 9/16” x 37 1/2” DGI-1242S 6 5/16” x 36 3/8”

2 DRMF1242 BUTT DROF1242 BUTT DGI-1242F 7 9/16” x 37 1/2” sDGI-1242BS s7 3/8” x 36 3/8”

BLPW2436 BUTT 1 DRMF1236 DROF1236 DGI-1236F 7 9/16” x 31 1/2” DGI-1236S 6 5/16” x 30 3/8”






PART

S: W

ALL

CABI

NET

S



D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V




CORNERWALLWITHTAMBOUR•48”HIGH CWT2448 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 CW SHELF ADJ 3/4

CWTS2448 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 CWS UNIT RAS

CWTS2448 WD 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 CWS24 SHELF WD NP

CORNERWALL•42”HIGH CW2442 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 CW SHELF ADJ 3/4

CW2742 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 CW27 SHELF ADJ 3/4

CWS2442 WD 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 CWS24 SHELF WD NP






CWS2430 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 CWS UNIT RAS


CORNERWALL•24”HIGH CW2424 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” N/A

CW2724 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” N/A

PENINSULACORNERWALL PWCW2442 BUTT 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 PWCW SHELF 3/4

2 DR1242 BUTT 11 3/4” x 41 1/2” 10 15/16” x 40”

PWCW2436 BUTT 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 PWCW SHELF 3/4

2 DR1236 BUTT 11 3/4” x 35 1/2” 10 15/16” x 34”

PWCW2430 BUTT 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 PWCW SHELF 3/4

2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28”

WALLEASYREACH WER2442 1 DR1242 WER DRILL 10 3/4” x 41 1/2” 10” x 40” 3 WER SHELF 3/4

1 DR1242 WER ND 10 3/4” x 41 1/2” 10” x 40”

WER2436 1 DR1236 WER DRILL 10 3/4” x 35 1/2” 10” x 34” 2 WER SHELF 3/4

1 DR1236 WER ND 10 3/4” x 35 1/2” 10” x 34”

WER24 1 DR1230 WER DRILL 10 3/4” x 29 1/2” 10” x 28” 2 WER SHELF 3/4

1 DR1230 WER ND 10 3/4” x 29 1/2” 10” x 28”

WALLENDANGLE WEA1242 1 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 WEA SHELF 3/4

WEA1236 1 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 WEA SHELF 3/4

WEA1230 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 2 WEA SHELF 3/4

PART

S: W

ALL

CABI

NET


23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR







CORNERWALLWITHTAMBOUR•48”HIGH CWT2448 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

CWTS2448 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

CWTS2448 WD 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

CORNERWALL•42”HIGH CW2442 1 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”

CW2742 1 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”

CWS2442 WD 1 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”






CWS2430 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”




PENINSULACORNERWALL PWCW2442 BUTT 1 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”


PWCW2436 BUTT 1 DRMF1536 DROF1536 DGI-1536F 10 9/16” x 31 1/2” DGI-1536S 9 5/16” x 30 3/8”


PWCW2430 BUTT 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”


WALLEASYREACH WER2442 N/A N/A N/A N/A

WER2436 N/A N/A N/A N/A

WER24 N/A N/A N/A N/A

WALLENDANGLE WEA1242 1 DRMF1542 DROF1542 DGI-1542F 10 9/16” x 37 1/2” DGI-1542S 9 5/16” x 36 3/8”

WEA1236 1 DRMF1536 DROF1536 DGI-1536F 10 9/16” x 31 1/2” DGI-1536S 9 5/16” x 30 3/8”

WEA1230 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

PART

S: W

ALL

CABI

NET

S


D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V





MICROWAVEWALL•42”HIGH WMSC271842 BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 WMSC2718 TOP SHELF 25 1/4” x 16 1/4” x 3/4”

MICROWAVEWALL•36”HIGH WMSC271236 BUTT 2 DR1315 BUTT 13 1/4” x 14 1/2” 12 7/16” x 13” N/A

WMSC271836 BUTT 2 DR1315 BUTT 13 1/4” x 14 1/2” 12 7/16” x 13” N/A

WMSC301236 2 DR1515 14 9/16” x 14 1/2” 12 7/8” x 13” N/A

COMPACTMICROWAVEWALL WCMSC241236 BUTT 2 DR1218 BUTT 11 3/4” x 17 1/2” 10 15/16” x 16” N/A

WCMSC271236 BUTT 2 DR1318 BUTT 13 1/4” x 17 1/2” 12 7/16” x 16” N/A

REFRIGERATORWALL•27”HIGHX24”DEEP W3027 X 24 DP 2 DR1527 14 9/16” x 26 1/2” 12 7/8” x 25” 1 30’’ SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

W3327 X 24 DP 2 DR1627 16 1/16” x 26 1/2” 14 3/8” x 25” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3627 X 24 DP 2 DR1827 17 9/16” x 26 1/2” 15 7/8” x 25” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

REFRIGERATORWALL•24”HIGHX24”DEEP W3324 X 24 DP 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33’’ SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

W3624 X 24 DP 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

REFRIGERATORWALL•21”HIGHX24”DEEP W3021 X 24 DP 2 DR1521 14 9/16” x 20” 12 7/8” x 18 1/2” N/A

W3321 X 24 DP 2 DR1621 16 1/16” x 20” 14 3/8” x 18 1/2” N/A

W3621 X 24 DP 2 DR1821 17 9/16” x 20” 15 7/8” x 18 1/2” N/A

REFRIGERATORWALL•18”HIGHX24”DEEP W3018 X 24 DP 2 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” N/A

W3318 X 24 DP 2 DR1618 16 1/16” x 17 1/2” 14 3/8” x 16” N/A

W3618 X 24 DP 2 DR1818 17 9/16” x 17 1/2” 15 7/8” x 16” N/A


W3615 X 24 DP 2 DR1815 17 9/16” x 14 1/2” 15 7/8” x 13” N/A

W3915 X 24 DP 2 DR1815 17 9/16” x 14 1/2” 15 7/8” x 13” N/A


W3312 X 24 DP 2 DR1612 16 1/16” x 11 1/2” 14 3/8” x 10” N/A

W3612 X 24 DP 2 DR1812 17 9/16” x 11 1/2” 15 7/8” x 10” N/A

W3912 X 24 DP 2 DR1812 17 9/16” x 11 1/2” 15 7/8” x 10” N/A

MEDICINECABINET MC1530 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” N/A

MCM1530 1 DRMCM1530 14 9/16” x 29 1/2” 12 7/8” x 28” N/A

TRI-VIEWMIRROR TV3030 3 MIRROR TV3030 8 13/16” x 26 1/2” 8 13/16” x 26 1/2” 3 TV30 SHELF 9 8 7/8” x 3” x 1/2”

3 TV30 SHELF 18 17 9/32” x 3” x 1/2”

TV3630 3 MIRROR TV3630 10 13/16” x 26 1/2” 10 13/16” x 26 1/2” 3 TV36 SHELF 11 10 7/8” x 3” x 1/2”

3 TV36 SHELF 22 21 9/32” x 3” x 1/2”

VALETCABINET VC2436 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” N/A

PART

S: W

ALL

CABI

NET


23, 25, 26, 31, 32 C, D5, J, M5, R, U, V

D1, D3, D6, D9, E, M1, M3, M6 M9, N, T, Y

GLASSINSERTSIZES&NOMENCLATURE

Part Name Dimensions Part Name Dimensions DimensionsPart Name

35, 38


12”WIDE 18” High DGI-1218F 7 9/16” x 13 1/2” DGI-1218S 6 5/16” x 12 3/8” DGI-1218S 6 5/16” x 12 3/8”

18” High BUTT DGI-1218F 7 9/16” x 13 1/2” DGI-1218BS 7 3/8” x 12 3/8” DGI-1218S 6 5/16” x 12 3/8”

24” High DGI-1224F 7 9/16” x 19 7/8” DGI-1224S 6 5/16” x 18 3/4” DGI-1224S 6 5/16” x 18 3/4”








13”WIDE 18” High BUTT DGI-1318F 9 1/4” x 13 1/2” DGI-1318BS 8 7/8” x 12 3/8” DGI-1318S 7 13/16” x 12 3/8”
































PART

S: W

ALL

CABI

NET

S

219PARTS DIRECTORy: Glass Inserts

DOOR ADJUSTABLE SHELF, DROT AND/OR ACCESSORy

SKU Qty Part Name Dimensions

Full Overlay Partial Overlay

Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y

Qty *Part Name Dimensions

23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

*For All Plywood Construction

Adjustable Shelf, refer to Parts Directory legend

STANDARDBASE B12 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12” SHELF 24DP 3/4 10 3/16” x 22 1/8” x 3/4”

B15 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

B21 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 21” SHELF 24DP 3/4 19 3/16” x 22 1/8” x 3/4”

B24 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

B24 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

B27 BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 27” SHELF 3/4 25 1/4” x 10 1/4” x 3/4”

B30 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30” SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

B30 1B 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30” SHELF 3/4 28 1/4” x 10 1/4” x 3/4”

B33 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33” SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

B33 1B 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33” SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

B36 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

B36 1B 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

B36 1B 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

B36 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 3/4 34 1/4” x 10 1/4” x 3/4”

B39 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 1 39” SHELF 3/4 37 1/4” x 10 1/4” x 3/4”

B42 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 42” SHELF 3/4 40 1/4” x 10 1/4” x 3/4”

B45 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45” SHELF 3/4 43 1/4” x 10 1/4” x 3/4”

B48 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 48” SHELF 3/4 46 1/4” x 10 1/4” x 3/4”

BASEWITHFULLHEIGHTDOOR BPP9 1 DRBPP9 ND 8 9/16” x 29 7/8” 6 7/8” x 28” 1 BPP9 KIT

BTDP9 1 DRBPP9 ND 8 9/16” x 29 7/8” 6 7/8” x 28” 1 BTDP9 KIT

TB9 1 DRTB9 8 9/16” x 29 7/8” 6 7/8” x 28” N/A

TB9 TDS 1 DRTB9 8 9/16” x 29 7/8” 6 7/8” x 28” 1 9” SHELF 24 DP 3/4 7 13/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDONEADJUSTABLESHELF B12 FWT 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12” SHELF 24DP 3/4 10 3/16” x 22 1/8” x 3/4”

1 DROT12 7 3/4” x 21” x 3 3/8”

B15 FWT 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”


1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

B27 FWT BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 27” SHELF 24DP 3/4 25 3/16” x 22 1/8” x 3/4”

1 DROT27 22 3/4” x 21” x 3 3/8”


1 DROT30 25 3/4” x 21” x 3 3/8”


1 DROT33 28 3/4” x 21” x 3 3/8”


1 DROT36 31 3/4” x 21” x 3 3/8”

B36 FWT 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 24DP 3/4 34 3/16” x 22 1/8” x 3/4”

1 DROT36 31 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET

S220 PARTS DIRECTORy: Base Cabinets

DRAWER / PANEL FRONT DRAWER BODy



Dimensions

D1, D3, D6, D9, M1, M3, M6, M9

For E, N, T, Y:Replace 5 9/16” with 5 1/8”

Qty Part Name Dimensions

23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASE B12 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




B24 BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 BUTT 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”


B30 1B 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”





B36 1B 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B36 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B39 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 CONC WD DT HG 16” x 3 19/32” x 21”




BASEWITHFULLHEIGHTDOOR BPP9 N/A N/A

BTDP9 N/A N/A

TB9 N/A N/A

TB9 TDS N/A N/A

BASEWITHONEDEEPROLLOUTTRAYANDONEADJUSTABLESHELF B12 FWT 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 FWT 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




B24 FWT BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 FWT BUTT 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”




B36 FWT 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S

221PARTS DIRECTORy: Base Cabinets




Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDONEADJUSTABLESHELF B12 CCFWT 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12” SHELF 24DP 3/4 10 3/16” x 22 1/8” x 3/4”

1 DROTCC12 7 3/4” x 21” x 3 3/8”

B15 CCFWT 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”


1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

B27 CCFWT BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 27” SHELF 24DP 3/4 25 3/16” x 22 1/8” x 3/4”

1 DROTCC27 22 3/4” x 21” x 3 3/8”


1 DROTCC30 25 3/4” x 21” x 3 3/8”


1 DROTCC33 28 3/4” x 21” x 3 3/8”


1 DROTCC36 31 3/4” x 21” x 3 3/8”

B36 CCFWT 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 24DP 3/4 34 3/16” x 22 1/8” x 3/4”

1 DROTCC36 31 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYS B12 2FWT 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DROT12 7 3/4” x 21” x 3 3/8”

B15 2FWT 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”

B21 2FWT 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DROT21 16 3/4” x 21” x 3 3/8”

B24 2FWT 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

B24 2FWT BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

B27 2FWT BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 2 DROT27 22 3/4” x 21” x 3 3/8”

B30 2FWT 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT30 25 3/4” x 21” x 3 3/8

B33 2FWT 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 2 DROT33 28 3/4” x 21” x 3 3/8”

B36 2FWT 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT36 31 3/4” x 21” x 3 3/8”

B36 2FWT 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT36 31 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B12 CC2FWT 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DROTCC12 7 3/4” x 21” x 3 3/8”

B15 CC2FWT 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”




B24 CC2FWT BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

B27 CC2FWT BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 2 DROTCC27 22 3/4” x 21” x 3 3/8”

B30 CC2FWT 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC30 25 3/4” x 21” x 3 3/8



B36 CC2FWT 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC36 31 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDONEADJUSTABLESHELF B12 CCFWT 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 CCFWT 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




B24 CCFWT BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 CCFWT BUTT 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”




B36 CCFWT 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

BASEWITHTWODEEPROLLOUTTRAYS B12 2FWT 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 2FWT 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




B24 2FWT BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 2FWT BUTT 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”




B36 2FWT 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B12 CC2FWT 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 CC2FWT 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




B24 CC2FWT BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 CC2FWT BUTT 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”




B36 CC2FWT 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



BASEWITHTWODEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B30 2T 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30” SHELF 24DP 3/4 28 3/16” x 22 1/8” x 3/4”

2 DROT15 10 3/4” x 21” x 3 3/8”

B33 2T 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33” SHELF 24DP 3/4 31 3/16” x 22 1/8” x 3/4”

2 DROT16 12 1/4” x 21” x 3 3/8”


2 DROT18 13 3/4” x 21” x 3 3/8”

B36 2T 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 24DP 3/4 34 3/16” x 10 1/4” x 3/4”

2 DROT18 13 3/4” x 21” x 3 3/8”


2 DROT19 15 1/4” x 21” x 3 3/8”


2 DROT21 16 3/4” x 21” x 3 3/8”


2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B30 CC2T 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 30” SHELF 24DP 3/4 28 3/16” x 22 1/8” x 3/4”

2 DROTCC15 10 3/4” x 21” x 3 3/8”

B33 CC2T 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 33” SHELF 24DP 3/4 31 3/16” x 22 1/8” x 3/4”

2 DROTCC16 12 1/4” x 21” x 3 3/8”


2 DROTCC18 13 3/4” x 21” x 3 3/8”

B36 CC2T 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36” SHELF 24DP 3/4 34 3/16” x 10 1/4” x 3/4”

2 DROTCC18 13 3/4” x 21” x 3 3/8”


2 DROTCC19 15 1/4” x 21” x 3 3/8”


2 DROTCC21 16 3/4” x 21” x 3 3/8”


2 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTHREEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B45 3T 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45” SHELF 24DP 3/4 43 3/16” x 22 1/8” x 3/4”

3 DROT15 10 3/4” x 21” x 3 3/8”

BASEWITHTHREEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B45 CC3T 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 45” SHELF 24DP 3/4 43 3/16” x 22 1/8” x 3/4”

3 DROTCC15 10 3/4” x 21” x 3 3/8”

BASEWITHFOURDEEPROLLOUTTRAYS B30 4T 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 4 DROT15 10 3/4” x 21” x 3 3/8”

B33 4T 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 4 DROT16 12 1/4” x 21” x 3 3/8”

B36 4T 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 4 DROT18 13 3/4” x 21” x 3 3/8”

B36 4T 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 4 DROT18 13 3/4” x 21” x 3 3/8”

B39 4T 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 4 DROT19 15 1/4” x 21” x 3 3/8”

B42 4T 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 4 DROT21 16 3/4” x 21” x 3 3/8”

B48 4T 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 4 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHFOURFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B30 CC4T 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 4 DROTCC15 10 3/4” x 21” x 3 3/8”

B33 CC4T 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 4 DROTCC16 12 1/4” x 21” x 3 3/8”


B36 CC4T 1TD 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 4 DROTCC18 13 3/4” x 21” x 3 3/8”




PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


BASEWITHTWODEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B30 2T 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

B33 2T 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8” 1 DRB33 CONC WD DT HG 29 1/2” x 3 19/32” x 21”


B36 2T 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B39 2T 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 CONC WD DT HG 16” x 3 19/32” x 21”



BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B30 CC2T 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

B33 CC2T 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8” 1 DRB33 CONC WD DT HG 29 1/2” x 3 19/32” x 21”


B36 CC2T 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B39 CC2T 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 CONC WD DT HG 16” x 3 19/32” x 21”



BASEWITHTHREEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B45 3T 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 3 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHTHREEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDONEADJUSTABLESHELF B45 CC3T 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 3 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHFOURDEEPROLLOUTTRAYS B30 4T 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”



B36 4T 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B39 4T 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 CONC WD DT HG 16” x 3 19/32” x 21”



BASEWITHFOURFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B30 CC4T 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”



B36 CC4T 1TD 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

B39 CC4T 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8” 2 DRB19 CONC WD DT HG 16” x 3 19/32” x 21”



PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



BASEWITHSIXDEEPROLLOUTTRAYS B45 6T 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 6 DROT15 10 3/4” x 21” x 3 3/8”

BASEWITHSIXFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B45 CC6T 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 6 DROTCC15 10 3/4” x 21” x 3 3/8”

BASEWITHDOORACCESSORY B15 PBDSU 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 PBDSU 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

B18 CBDR 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

BASEWITHROLLOUTTRAYDIVIDER B12 ROTD 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 ROTDK12

B15 ROTD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 ROTDK15

BASEWITHFULLACCESSCUSHIONCLOSEROLLOUTTRAYDIVIDER B12 CCROTD 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 ROTDKCC12

B15 CCROTD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 ROTDKCC15

BASEWITHFACTORYINSTALLEDWASTEBASKET(S) BWBT15 1 DRBWBT15 ND 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 BWBT15 KIT

BWBT15-2 1 DRBWBT15 ND 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 BWBT15-2 KIT

BWBT18-2 1 DRBWBT18 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 BWBT18-2 KIT

BASEPOTANDPANORGANIZERCABINET B24 BPPO 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 BPPOK24 19 3/4” X 21” X 19”

B24 BUTT BPPO 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 BPPOK24 19 3/4” X 21” X 19”

B27 BUTT BPPO 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 BPPOK27 22 3/4” X 21” X 19”

B30 1B BPPO 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 BPPOK30 25 3/4” X 21” X 19”



B36 1B 1TD BPPO 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 BPPOK36 31 3/4” X 21” X 19”

BASEPOTANDPANCABINETWITHFULLACCESSCUSHIONCLOSEORGANIZER B24 CCBPPO 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 BPPOKCC24 19 3/4” X 21” X 19”

B24 BUTT CCBPPO 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 BPPOKCC24 19 3/4” X 21” X 19”

B27 BUTT CCBPPO 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 BPPOKCC27 22 3/4” X 21” X 19”

B30 1B CCBPPO 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 BPPOKCC30 25 3/4” X 21” X 19”



B36 1B 1TD CCBPPO 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 BPPOKCC36 31 3/4” X 21” X 19”

PENINSULABASE PB12 2 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 12’’ SHELF PB 3/4 10 3/16” x 22 1/8” x 3/4”

PB18 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18’’ SHELF PB 3/4 16 3/16” x 22 1/8” x 3/4”


PB24 BUTT 4 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24’’ SHELF PB 3/4 22 3/16” x 22 1/8” x 3/4”



PB36 1TD 4 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 36’’ SHELF PB 3/4 34 3/16” x 22 1/8” x 3/4”


PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


BASEWITHSIXDEEPROLLOUTTRAYS B45 6T 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 3 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHSIXFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS B45 CC6T 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 3 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHDOORACCESSORY B15 PBDSU 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 PBDSU 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”

B18 CBDR 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”

BASEWITHROLLOUTTRAYDIVIDER B12 ROTD 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 ROTD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHFULLACCESSCUSHIONCLOSEROLLOUTTRAYDIVIDER B12 CCROTD 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

B15 CCROTD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BASEWITHFACTORYINSTALLEDWASTEBASKET(S) BWBT15 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BWBT15-2 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

BWBT18-2 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”

BASEPOTANDPANORGANIZERCABINET B24 BPPO 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B24 BUTT BPPO 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 BUTT BPPO 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

B30 1B BPPO 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”



B36 1B 1TD BPPO 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

BASEPOTANDPANCABINETWITHFULLACCESSCUSHIONCLOSEORGANIZER B24 CCBPPO 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B24 BUTT CCBPPO 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

B27 BUTT CCBPPO 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8” 1 DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

B30 1B CCBPPO 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8” 1 DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”



B36 1B 1TD CCBPPO 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”

PENINSULABASE PB12 2 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

PB18 2 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”


PB24 BUTT 2 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”



1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

PB36 1TD 2 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8” 1 DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”


PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CHB 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 CHB 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT CHB 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 FWT CHB 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT CHB 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT CHB 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CCFWT CHB 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT CHB 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT CHB 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 2FWT CHB 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT CHB 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT CHB 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CC2FWT CHB 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT CHB 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT CHB 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CHB 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CHBK15

B18 CHB 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CHBK18

B21 CHB 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 1 CHBK21

B24 CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

B24 BUTT CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 FWT CHB 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CHBK15

B18 FWT CHB 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CHBK18



B24 FWT BUTT CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CCFWT CHB 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CHBK15

B18 CCFWT CHB 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CHBK18



B24 CCFWT BUTT CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 2FWT CHB 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CHBK15

B18 2FWT CHB 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CHBK18



B24 2FWT BUTT CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCHOPPINGBLOCKKIT B15 CC2FWT CHB 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CHBK15

B18 CC2FWT CHB 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CHBK18



B24 CC2FWT BUTT CHB 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CHBK24

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 CD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT CD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 FWT CD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT CD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT CD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CCFWT CD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT CD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT CD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 2FWT CD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT CD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT CD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CC2FWT CD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT CD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT CD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 BUTT CD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 FWT CD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 FWT CD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 FWT BUTT CD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CCFWT CD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CCFWT CD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CCFWT BUTT CD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 2FWT CD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 2FWT CD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 2FWT BUTT CD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTLERYDIVIDERKIT B15 CC2FWT CD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CC2FWT CD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CC2FWT BUTT CD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDCUTTINGCENTERKIT B15 CC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 CC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT CC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 FWT CC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT CC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT CC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 CCFWT CC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT CC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT CC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 2FWT CC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT CC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT CC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 CC2FWT CC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT CC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT CC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDCUTTINGCENTERKIT B15 CC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CCK15

B18 CC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CCK18

B21 CC 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 1 CCK21

B24 CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

B24 BUTT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 FWT CC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CCK15

B18 FWT CC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CCK18

B21 FWT CC 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 1 CCK21

B24 FWT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

B24 FWT BUTT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 CCFWT CC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CCK15

B18 CCFWT CC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CCK18



B24 CCFWT BUTT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 2FWT CC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CCK15

B18 2FWT CC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CCK18

B21 2FWT CC 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8” 1 CCK21

B24 2FWT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

B24 2FWT BUTT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDCUTTINGCENTERKIT B15 CC2FWT CC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 CCK15

B18 CC2FWT CC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 CCK18



B24 CC2FWT BUTT CC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 CCK24

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDKNIFESECTIONKIT B15 KS 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 KS 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT KS 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONKIT B15 FWT KS 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT KS 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT KS 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONKIT B15 CCFWT KS 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT KS 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT KS 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONKIT B15 2FWT KS 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT KS 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT KS 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONKIT B15 CC2FWT KS 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT KS 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT KS 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDKNIFESECTIONKIT B15 KS 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 KS 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 BUTT KS 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONKIT B15 FWT KS 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 FWT KS 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 FWT BUTT KS 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONKIT B15 CCFWT KS 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CCFWT KS 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CCFWT BUTT KS 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONKIT B15 2FWT KS 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 2FWT KS 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 2FWT BUTT KS 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONKIT B15 CC2FWT KS 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CC2FWT KS 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CC2FWT BUTT KS 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 KSCC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 KSCC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT KSCC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 FWT KSCC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT KSCC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT KSCC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 CCFWT KSCC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT KSCC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT KSCC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 2FWT KSCC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT KSCC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT KSCC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKITB15 CC2FWT KSCC 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT KSCC 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT KSCC 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET


DRAWER BODyFull Overlay


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


Partial Overlay

D1, D3, D6, D9, M1, M3, M6, M9For E, N, T, Y:

Replace 5 9/16” with 5 1/8”

DRAWER FRONT


STANDARDBASEWITHFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 KSCC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 KSCCK15

B18 KSCC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 KSCCK18



B24 BUTT KSCC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 KSCCK24

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 FWT KSCC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 KSCCK15

B18 FWT KSCC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 KSCCK18



B24 FWT BUTT KSCC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 KSCCK24

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 CCFWT KSCC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 KSCCK15

B18 CCFWT KSCC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 KSCCK18



B24 CCFWT BUTT KSCC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 KSCCK24

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT B15 2FWT KSCC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 KSCCK15

B18 2FWT KSCC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 KSCCK18



B24 2FWT BUTT KSCC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 KSCCK24

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKITB15 CC2FWT KSCC 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 KSCCK15

B18 CC2FWT KSCC 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 KSCCK18



B24 CC2FWT BUTT KSCC 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 KSCCK24

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 MPCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 MPCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT MPCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 FWT MPCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT MPCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT MPCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKITB15 CCFWT MPCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT MPCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT MPCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 2FWT MPCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT MPCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT MPCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKITB15 CC2FWT MPCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT MPCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT MPCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 MPCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 MPCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 BUTT MPCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 FWT MPCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 FWT MPCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 FWT BUTT MPCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKITB15 CCFWT MPCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CCFWT MPCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CCFWT BUTT MPCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT B15 2FWT MPCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 2FWT MPCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 2FWT BUTT MPCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKITB15 CC2FWT MPCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CC2FWT MPCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CC2FWT BUTT MPCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 SDI 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 SDI 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT SDI 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 FWT SDI 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT SDI 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT SDI 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 CCFWT SDI 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT SDI 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT SDI 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 2FWT SDI 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT SDI 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT SDI 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 CC2FWT SDI 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT SDI 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT SDI 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 SDI 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 SDI 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 BUTT SDI 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 FWT SDI 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 FWT SDI 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 FWT BUTT SDI 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 CCFWT SDI 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CCFWT SDI 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CCFWT BUTT SDI 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 2FWT SDI 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 2FWT SDI 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 2FWT BUTT SDI 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDSPICEDRAWERINSERTKIT B15 CC2FWT SDI 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”

B18 CC2FWT SDI 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”



B24 CC2FWT BUTT SDI 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



STANDARDBASEWITHFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 WTCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

B18 WTCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”



B24 BUTT WTCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 FWT WTCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROT15 10 3/4” x 21” x 3 3/8”

B18 FWT WTCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROT18 13 3/4” x 21” x 3 3/8”


1 DROT21 16 3/4” x 21” x 3 3/8”


1 DROT24 19 3/4” x 21” x 3 3/8”

B24 FWT BUTT WTCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 CCFWT WTCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 15” SHELF 24DP 3/4 13 3/16” x 22 1/8” x 3/4”

1 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CCFWT WTCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 18” SHELF 24DP 3/4 16 3/16” x 22 1/8” x 3/4”

1 DROTCC18 13 3/4” x 21” x 3 3/8”


1 DROTCC21 16 3/4” x 21” x 3 3/8”


1 DROTCC24 19 3/4” x 21” x 3 3/8”

B24 CCFWT BUTT WTCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

1 DROTCC24 19 3/4” x 21” x 3 3/8”

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 2FWT WTCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROT15 10 3/4” x 21” x 3 3/8”

B18 2FWT WTCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROT18 13 3/4” x 21” x 3 3/8”



B24 2FWT BUTT WTCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROT24 19 3/4” x 21” x 3 3/8”

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 CC2FWT WTCD 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DROTCC15 10 3/4” x 21” x 3 3/8”

B18 CC2FWT WTCD 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DROTCC18 13 3/4” x 21” x 3 3/8”



B24 CC2FWT BUTT WTCD 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DROTCC24 19 3/4” x 21” x 3 3/8”

PART

S: B

ASE

CABI

NET





Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDBASEWITHFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 WTCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 WTCDK15

B18 WTCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 WTCDK18



B24 BUTT WTCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 WTCDK24

BASEWITHONEDEEPROLLOUTTRAYANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 FWT WTCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 WTCDK15

B18 FWT WTCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 WTCDK18



B24 FWT BUTT WTCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 WTCDK24

BASEWITHONEFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 CCFWT WTCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 WTCDK15

B18 CCFWT WTCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 WTCDK18



B24 CCFWT BUTT WTCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 WTCDK24

BASEWITHTWODEEPROLLOUTTRAYSANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 2FWT WTCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 WTCDK15

B18 2FWT WTCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 WTCDK18



B24 2FWT BUTT WTCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 WTCDK24

BASEWITHTWOFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYSANDFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT B15 CC2FWT WTCD 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 WTCDK15

B18 CC2FWT WTCD 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 1 WTCDK18



B24 CC2FWT BUTT WTCD 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 WTCDK24

PART

S: B

ASE

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V



BLINDCORNER BLB36/39 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 27” SHELF 3/4 25 1/4” x 10 1/4” x 3/4”

BLB39/42 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 33” SHELF 3/4 31 1/4” x 10 1/4” x 3/4”

BLB42/45 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 39” SHELF 3/4 37 1/4” x 10 1/4” x 3/4”

BLB45/48 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 45” SHELF 3/4 43 1/4” x 10 1/4” x 3/4”

BLB48/51 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 48” SHELF 3/4 46 1/4” x 10 1/4” x 3/4”

BLINDPENINSULACORNER PBC24 1 DR2424 23 9/16” x 27 7/8” 21 7/8” x 22 3/8” 1 24” SHELF PB 3/4 22 3/16” x 22 1/8” x 3/4”

PBC24 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 24” SHELF PB 3/4 22 3/16” x 22 1/8” x 3/4”

BASEENDANGLE BEA12 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 BEA12 SHELF 3/4

BEA12FH 1 DR15FH 14 9/16” x 29 7/8” 12 7/8” x 28” 1 BEA12 SHELF 3/4

BEA24 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 BEA SHELF 3/4

DESKWITHFACTORYINSTALLEDWASTEBASKET(S) DWBT1821 1 DRDWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DWBT1821 KIT

DWBT1824 1 DRDWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DWBT1824 KIT

DESKDOOR•21”DEEP DDO1221 1 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 12” SHELF 21DP 3/4 10 3/16” x 18 7/8” x 3/4”

DDO1521 1 DR1518 14 9/16” x 17 1/2” 12 7/8” x 16” 1 15” SHELF 21DP 3/4 13 3/16” x 18 7/8” x 3/4”



DDO2421 BUTT 2 DR1218 BUTT 11 3/4” x 17 1/2” 10 15/16” x 16” 1 24” SHELF 21DP 3/4 22 3/16” x 18 7/8” x 3/4”

DESKDOOR•24”DEEP DDO1224 1 DR1218 11 9/16” x 17 1/2” 9 7/8” x 16” 1 12” SHELF 24DP 3/4 10 3/16” x 22 1/8” x 3/4”




DDO2424 BUTT 2 DR1218 BUTT 11 3/4” x 17 1/2” 10 15/16” x 16” 1 24” SHELF 24DP 3/4 22 3/16” x 22 1/8” x 3/4”

PART

S: B

ASE

CABI

NET

S244 PARTS DIRECTORy: Base/Desk Cabinets




Dimensions

D1, D3, D6, D9, M1, M3, M6, M9



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


BLINDCORNER BLB36/39 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

BLB39/42 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”




BLINDPENINSULACORNER PBC24 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PBC24 BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BASEENDANGLE BEA12 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 N/A

BEA12FH N/A N/A

BEA24 2 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8” 2 N/A

DESKWITHFACTORYINSTALLEDWASTEBASKET(S) DWBT1821 N/A N/A

DWBT1824 N/A N/A

DESKDOOR•21”DEEP DDO1221 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

DDO1521 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”



DDO2421 BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 X 18DP WD DT 19 23/32” x 3 5/16” x 18”

DESKDOOR•24”DEEP DDO1224 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8” 1 DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

DDO1524 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8” 1 DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”



DDO2424 BUTT 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8” 1 DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S

245PARTS DIRECTORy: Base/Desk Cabinets

Part NamePart Name Dimensions

DOOR DRAWER / PANEL FRONT


Full Overlay AOL

Dimensions



23, 25, 26, 31, 32, 35, 38, C, D5, J, K, M5, R, U, V

BASESPICEDRAWERCABINET BSDC6 5 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 BSDC6 4 29/32” x 22 15/16” x 4 3/4”

SPICEDRAWERCABINET SDC18 3 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”

SDC24 4 DDF SDC 5 11/16” x 5 1/2” x 1/2” DDF SDC 5 11/16” x 5 1/2” x 1/2” DRB6 SDC30 4 29/32” x 10 15/16” x 4 3/4”



THREEDRAWERBASECABINET DB12 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16” DRB12M CONC WD DT HG 8 1/2” x 6 15/16” x 21”

DB15 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”












DB36 1TD 1 DDF36 35 9/16” x 5 13/16” DDF36 33 7/8” x 5 1/8” DRB36 CONC WD DT HG 32 1/2” x 3 19/32” x 21”


THREEDRAWERBASECABINETWITHFACTORYINSTALLEDCUTLERYDIVIDERKIT DB15 CD 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 CD 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDKNIFESECTIONKIT DB15 KS 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 KS 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT DB15 MPCD 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 MPCD 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






PART

S: B

ASE

CABI

NET


Part Name Dimensions




Dimensions



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


THREEDRAWERBASECABINETWITHFACTORYINSTALLEDSPICEDRAWERINSERTKIT DB15 SDI 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 SDI 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDCHOPPINGBLOCKKIT DB15 CHB 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” CHBK15


DB18 CHB 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” CHBK18






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDCUTTINGCENTERKIT DB15 CC 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” CCK15


DB18 CC 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” CCK18






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT DB15 KSCC 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” KSCCK15


DB18 KSCC 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” KSCCK18






THREEDRAWERBASECABINETWITHFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT DB15 WTCD 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” WTCDK15


DB18 WTCD 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” WTCDK18






BASEMICROWAVECABINET BMC24 2 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8” DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

BMC27 2 DDF27 26 9/16” x 5 13/16” DDF27 24 7/8” x 5 1/8” DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

BMC30 2 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8” DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

PART

S: B

ASE

CABI

NET

S






Dimensions



23, 25, 26, 31, 32, 35, 38, C, D5, J, K, M5, R, U, V

Part Name

FOURDRAWERBASECABINET DB12 4DWR 3 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”


DB15 4DWR 3 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”










FOURDRAWERBASECABINETWITHFACTORYINSTALLEDCUTLERYDIVIDERKIT DB15 4DWR CD 3 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 4DWR CD 3 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






FOURDRAWERBASECABINETWITHFACTORYINSTALLEDKNIFESECTIONKIT DB15 4DWR KS 3 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 4DWR KS 3 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






FOURDRAWERBASECABINETWITHFACTORYINSTALLEDMOLDEDPLASTICCUTLERYDIVIDERKIT DB15 4DWR MPCD 3 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 4DWR MPCD 3 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






FOURDRAWERBASECABINETWITHFACTORYINSTALLEDSPICEDRAWERINSERTKIT DB15 4DWR SDI 3 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 4DWR SDI 3 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” DRB18 CONC WD DT HG 14 1/2” x 3 19/32” x 21”






PART

S: B

ASE

CABI

NET






Dimensions



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


FOURDRAWERBASECABINETWITHFACTORYINSTALLEDCHOPPINGBLOCKKIT DB15 4DWR CHB 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” CHBK15

2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”


DB18 4DWR CHB 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” CHBK18









FOURDRAWERBASECABINETWITHFACTORYINSTALLEDCUTTINGCENTERKIT DB15 4DWR CC 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” CCK15



DB18 4DWR CC 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” CCK18









FOURDRAWERBASECABINETWITHFACTORYINSTALLEDKNIFESECTIONCUTTINGCENTERKIT DB15 4DWR KSCC 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” KSCCK15



DB18 4DWR KSCC 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” KSCCK18









FOURDRAWERBASECABINETWITHFACTORYINSTALLEDWOODTIEREDCUTLERYDIVIDERKIT DB15 4DWR WTCD 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” WTCDK15



DB18 4DWR WTCD 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8” WTCDK18









PART

S: B

ASE

CABI

NET

S




Dimensions

D1, D3, D6, D9, M1, M3, M6, M9

For E, N, T, Y: Replace 5 9/16” with 5 1/8”

23, 25, 26, 31, 32, 35, 38

C, D5, J, K, M5, R, U, V




Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9,

N, T, Y

23, 25, 26, 31, 32, 35, 38,

C, D5, J, K, M5, R, U, V

CORNERSINKBASE CSB36 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

CORNERSINKFRONT CSF36 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

CSF42 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

DEEPSINKBASE DSB30 2 DR1521 DSB 14 9/16” x 20” 12 7/8” x 17 7/8” N/A

DSB36 2 DR1821 DSB 17 9/16” x 20” 15 7/8” x 17 7/8” N/A

SINK/RANGEBASEANDFRONT SF12 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DDF12 11 9/16” x 5 13/16” 9 7/8” x 5 1/8”

SF15 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

SB18 / SF18 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

SB21 / SF21 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

SB24 / SF24 1 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

SB24 BUTT / SF24 BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

SB27 BUTT / SF27 BUTT 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 DDF27 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”

SB30 / SF30 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

SB30 1B 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

SB33 / SF33 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”

SB33 1B 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”

SB36 / SF36 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

SB36 1B 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

SB39 / SF39 2 DR1924 19 1/16” x 23 7/8” 17 3/8” x 22 3/8” 2 DDF19 19 1/16” x 5 13/16” 17 3/8” x 5 1/8”

SB42 / SF42 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

SB45 / SF45 3 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 3 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

SB48 / SF48 2 DR2424 23 9/16” x 23 7/8” 21 7/8” x 22 3/8” 2 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

SINKBASEWITHFACTORYINSTALLEDTILT-OUTTRAY(S) SB18 STO (TO) 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 DRILL 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

SB21 STO (TO) 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 DRILL 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”


SB24 BUTT STO (TO) 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DDF24 DRILL 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

SB27 BUTT STO (TO) 2 DR1324 BUTT 13 1/4” x 23 7/8” 12 7/16” x 22 3/8” 1 DDF27 DRILL 26 9/16” x 5 13/16” 24 7/8” x 5 1/8”


SB30 1B STO (TO) 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 DRILL 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”








SINKBASEMULTI-STORAGECABINET SBMS30 1B STO 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 DRILL 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

SBMS36 1B STO 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DDF18 DRILL 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

PART

S: B

ASE

CABI

NET


Part Name

DOOR SPIN UNIT



Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y

23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


CORNERBASE BER33 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” N/A

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BER3336L 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” N/A

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BER3336R 1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28” N/A

1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28”

BER36 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” N/A

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BER3633L 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” N/A

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BER3633R 1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28” N/A

1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28”

BSS33 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” 1 BSS33 UNIT RAS

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BSS33 WD 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” 2 BSS33 SHELF WD NP

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BSS3336L 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” 1 BSS33 UNIT RAS

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BSS3336L WD 1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28” 2 BSS3336 SHELF WD NP

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BSS3336R 1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28” 1 BSS33 UNIT RAS

1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28”

BSS3336R WD 1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28” 2 BSS3336 SHELF WD NP

1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28”

BSS36 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 1 BSS36 UNIT RAS

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BSS36 WD 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 2 BSS36 SHELF WD NP

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

BSS3633L 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 1 BSS33 UNIT RAS

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BSS3633L WD 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 2 BSS3633 SHELF WD NP

1 DR930 BER ND 7 3/4” x 29 7/8” 7” x 28”

BSS3633R 1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28” 1 BSS33 UNIT RAS

1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28”

BSS3633R WD 1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28” 2 BSS3633 SHELF WD NP

1 DR930 BER DRILL 7 3/4” x 29 7/8” 7” x 28”

CAR36 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 1 CAR36 UNIT RAS

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28”

CAR36 WD 1 DR1230 BER DRILL 10 3/4” x 29 7/8” 10” x 28” 2 CAR36 SHELF WD

1 DR1230 BER ND 10 3/4” x 29 7/8” 10” x 28” 1 BSSCWSCAR T-SHAFT FE

1 WOOD SPIN SHELF HDW

CBS36 1 DRCBS36 14 9/16” x 29 7/8” 12 7/8” x 28” 1 CBS36 UNIT RAS

CBS36 WD 1 DRCBS36 14 9/16” x 29 7/8” 12 7/8” x 28” 2 CBS SHELF WD NP

PART

S: B

ASE

CABI

NET

S






Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

†Part Name



SINGLEOVENCABINETS•84”HIGH OVS2784 BUTT 2 DR1318OV BUTT 13 1/4” x 17 1/2” DR1218 BUTT 10 15/16” x 16” N/A

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8”

OVS3084 2 DR1518OV 14 9/16” x 17 1/2” N/A N/A

2 DR1524OV 14 9/16” x 23 7/8”

OVS3084 BUTT 2 N/A DR1318 BUTT 12 7/16” x 16” N/A

2 DR1324 BUTT 12 7/16” x 22 3/8”

OVS3384 2 DR1618OV 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8”

SINGLEOVENCABINETS•90”HIGH OVS2790 AS BUTT 4 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”

OVS3090 AS 4 DR1524OV 14 9/16” x 23 7/8” N/A 1 S3024 28 3/16” x 22 1/8” x 3/4”

OVS3090 AS BUTT 4 N/A DR1324 BUTT 12 7/16” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”

OVS3390 AS 4 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”

SINGLEOVENCABINETS•96”HIGH OVS2796 AS BUTT 2 DR1330OV BUTT 13 1/4” x 29 1/2” DR1230 BUTT 10 15/16” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8”

OVS3096 AS 2 DR1530OV 14 9/16” x 29 1/2” N/A 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1524OV 14 9/16” x 23 7/8”

OVS3096 AS BUTT 2 N/A DR1330 BUTT 12 7/16” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1324 BUTT 12 7/16” x 22 3/8”

OVS3396 AS 2 DR1630OV 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8”

SINGLEOVENCABINETSWITHORGANIZER•84”HIGH OVS2784 BUTT BPPO 2 DR1318OV BUTT 13 1/4” x 17 1/2” DR1218 BUTT 10 15/16” x 16” N/A

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” BBPOK24

OVS3084 BPPO 2 DR1518OV 14 9/16” x 17 1/2” N/A N/A

2 DR1524OV 14 9/16” x 23 7/8” BPPOK27

OVS3084 BUTT BPPO 2 N/A DR1318 BUTT 12 7/16” x 16” N/A

2 DR1324 BUTT 12 7/16” x 22 3/8” BPPOK27

OVS3384 BPPO 2 DR1618OV 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” BPPOK30

SINGLEOVENCABINETSWITHORGANIZER•90”HIGH OVS2790 BUTT BPPO 4 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”

BPPOK24

OVS3090 BPPO 4 DR1524OV 14 9/16” x 23 7/8” N/A 1 S3024 28 3/16” x 22 1/8” x 3/4”

BPPOK27

OVS3090 BUTT BPPO 4 N/A DR1324 BUTT 12 7/16” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”

BPPOK27

OVS3390 BPPO 4 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”

BPPOK30

SINGLEOVENCABINETSWITHORGANIZER•96”HIGH OVS2796 BUTT BBPO 2 DR1330OV BUTT 13 1/4” x 29 1/2” DR1230 BUTT 10 15/16” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” BPPOK24

OVS3096 BPPO 2 DR1530OV 14 9/16” x 29 1/2” N/A 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1524OV 14 9/16” x 23 7/8” BPPOK27

OVS3096 BUTT BPPO 2 N/A DR1330 BUTT 12 7/16” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1324 BUTT 12 7/16” x 22 3/8” BPPOK27

OVS3396 BPPO 2 DR1630OV 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” BPPOK30

PART

S: T

ALL

CABI

NET

S252 PARTS DIRECTORy: Tall Cabinets

SKU Qty Qty†Part Name Dimensions

23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

†Part Name Dimensions

DRAWER / PANEL FRONT

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y



DRAWER BODy

Dimensions*Part Name




SINGLEOVENCABINETSWITHFULLACCESSCUSHIONCLOSEORGANIZER•84”HIGH OVS2784 BUTT CCBPPO 2 DR1318OV BUTT 13 1/4” x 17 1/2” DR1218 BUTT 10 15/16” x 16” N/A

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” BBPOKCC24

OVS3084 CCBPPO 2 DR1518OV 14 9/16” x 17 1/2” N/A N/A

2 DR1524OV 14 9/16” x 23 7/8” BPPOKCC27

OVS3084 BUTT CCBPPO 2 N/A DR1318 BUTT 12 7/16” x 16” N/A

2 DR1324 BUTT 12 7/16” x 22 3/8” BPPOKCC27

OVS3384 CCBPPO 2 DR1618OV 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” BPPOKCC30

SINGLEOVENCABINETSWITHFULLACCESSCUSHIONCLOSEORGANIZER•90”HIGH OVS2790 BUTT CCBPPO 4 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”

BPPOKCC24

OVS3090 CCBPPO 4 DR1524OV 14 9/16” x 23 7/8” N/A 1 S3024 28 3/16” x 22 1/8” x 3/4”

BPPOKCC27

OVS3090 BUTT CCBPPO 4 N/A DR1324 BUTT 12 7/16” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”

BPPOKCC27

OVS3390 CCBPPO 4 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”

BPPOKCC30

SINGLEOVENCABINETSWITHFULLACCESSCUSHIONCLOSEORGANIZER•96”HIGH OVS2796 BUTT CCBPPO 2 DR1330OV BUTT 13 1/4” x 29 1/2” DR1230 BUTT 10 15/16” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”

2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” BPPOKCC24

OVS3096 CCBPPO 2 DR1530OV 14 9/16” x 29 1/2” N/A 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1524OV 14 9/16” x 23 7/8” BPPOKCC27

OVS3096 BUTT CCBPPO 2 N/A DR1330 BUTT 12 7/16” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1324 BUTT 12 7/16” x 22 3/8” BPPOKCC27

OVS3396 CCBPPO 2 DR1630OV 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”

2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” BPPOKCC30

PART

S: T

ALL

CABI

NET

S

253PARTS DIRECTORy: Tall Cabinets


*For All Plywood Construction Adjustable Shelf, refer to Parts Directory legend




Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

†Part Name

DOUBLEOVENCABINETS•84”HIGH OVD2784 BUTT 2 DR1318OV BUTT 13 1/4” x 17 1/2” DR1218 BUTT 10 15/16” x 16” N/A

OVD3084 2 DR1518OV 14 9/16” x 17 1/2” N/A N/A

OVD3084 BUTT 2 N/A DR1318 BUTT 12 7/16” x 16” N/A

OVD3384 2 DR1618OV 16 1/16” x 17 1/2” DR1518 12 7/8” x 16” N/A

DOUBLEOVENCABINETS•90”HIGH OVD2790 AS BUTT 2 DR1324OV BUTT 13 1/4” x 23 7/8” DR1224 BUTT 10 15/16” x 22 3/8” 1 S2724 25 3/16” x 22 1/8” x 3/4”

OVD3090 AS 2 DR1524OV 14 9/16” x 23 7/8” N/A 1 S3024 28 3/16” x 22 1/8” x 3/4”

OVD3090 AS BUTT 2 N/A DR1324 BUTT 12 7/16” x 22 3/8” 1 S3024 28 3/16” x 22 1/8” x 3/4”

OVD3390 AS 2 DR1624OV 16 1/16” x 23 7/8” DR1524 12 7/8” x 22 3/8” 1 S3324 31 3/16” x 22 1/8” x 3/4”

DOUBLEOVENCABINETS•96”HIGH OVD2796 AS BUTT 2 DR1330OV BUTT 13 1/4” x 29 1/2” DR1230 BUTT 10 15/16” x 28” 2 S2724 25 3/16” x 22 1/8” x 3/4”

OVD3096 AS 2 DR1530OV 14 9/16” x 29 1/2” N/A 2 S3024 28 3/16” x 22 1/8” x 3/4”

OVD3096 AS BUTT 2 N/A DR1330 BUTT 12 7/16” x 28” 2 S3024 28 3/16” x 22 1/8” x 3/4”

OVD3396 AS 2 DR1630OV 16 1/16” x 29 1/2” DR1530 12 7/8” x 28” 2 S3324 31 3/16” x 22 1/8” x 3/4”

PART

S: T

ALL

CABI

NET




23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


Partial Overlay



DRAWER FRONT


DOUBLEOVENCABINETS•84”HIGH OVD2784 BUTT 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

OVD3084 1 DDFOV30 29 9/16” x 7 7/16” N/A DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3084 BUTT 1 N/A DDF27 24 7/8” x 5 1/8” DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3384 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

DOUBLEOVENCABINETS•90”HIGH OVD2790 AS BUTT 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

OVD3090 AS 1 DDFOV30 29 9/16” x 7 7/16” N/A DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3090 AS BUTT 1 N/A DDF27 24 7/8” x 5 1/8” DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3390 AS 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

DOUBLEOVENCABINETS•96”HIGH OVD2796 AS BUTT 1 DDFOV27 26 9/16” x 7 7/16” DDF24 21 7/8” x 5 1/8” DRB24 CONC WD DT HG 20 1/2” x 3 19/32” x 21”

OVD3096 AS 1 DDFOV30 29 9/16” x 7 7/16” N/A DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3096 AS BUTT 1 N/A DDF27 24 7/8” x 5 1/8” DRB27 CONC WD DT HG 23 1/2” x 3 19/32” x 21”

OVD3396 AS 1 DDFOV33 32 9/16” x 7 7/16” DDF30 27 7/8” x 5 1/8” DRB30 CONC WD DT HG 26 1/2” x 3 19/32” x 21”

PART

S: T

ALL

CABI

NET

S





Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


*For All Plywood Construction or Matching Interior Adjustable Shelf,

refer to Parts Directory legend

UTILITYWITHADJUSTABLESHELVES•12”DEEPX84”HIGH UT1212 X 84 AS 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S1212 10 1/4” x 10 1/4” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”

UT1512 X 84 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1512 13 1/4” x 10 1/4” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1812 X 84 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1812 16 1/4” x 10 1/4” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”

UT2412 X 84 AS BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 5 S2412 22 1/4” x 10 1/4” x 3/4”

2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1812 X 90 AS 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S1812 16 1/4” x 10 1/4” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1812 X 96 AS 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S1812 16 1/4” x 10 1/4” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”


1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”

UT1524 X 84 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1524 13 3/16” x 22 1/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1824 X 84 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”

UT3024 X 84 AS 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT3624 X 84 AS 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1824 X 90 AS 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”

UT3024 X 90 AS 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 6 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT3624 X 90 AS 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 6 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”

PART

S: T

ALL

CABI

NET



23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y

s DGI_BS NOT AVAILABLE FOR 35 OR 38 DOOR STYLES — USE DGI0_S

OPEN FRAME DOOR


TOP DOOR ONLY




TOP DOOR ONLY



UTILITYWITHADJUSTABLESHELVES•12”DEEPX84”HIGH UT1212 X 84 AS 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

UT1512 X 84 AS 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”


UT2412 X 84 AS BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”


















PART

S: T

ALL

CABI

NET

S


DOOR DRAWER BODy



Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V





1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT1824 X 96 AS 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”

UT3024 X 96 AS 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 7 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

UT3624 X 96 AS 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 7 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”

UTILITYWITHDEEPROLLOUTTRAYS•84”HIGH UT1224 X 84 4ROT 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1224 10 3/16” x 22 1/8” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 DROT12 7 3/4” x 21” x 3 3/8”

UT1524 X 84 4ROT 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1524 13 3/16” x 22 1/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT15 10 3/4” x 21” x 3 3/8”

UT1824 X 84 4ROT 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT18 13 3/4” x 21” x 3 3/8”

UT2424 X 84 4ROT BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 1 S2424 22 3/16” x 22 1/8” x 3/4”

2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4” 4 DROT24 19 3/4” x 21” x 3 3/8”

UT3024 X 84 4ROT 2 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT30 25 3/4” x 21” x 3 3/8

UT3624 X 84 4ROT 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT36 31 3/4” x 21” x 3 3/8”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT15 10 3/4” x 21” x 3 3/8”

UT1824 X 90 4ROT 1 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT18 13 3/4” x 21” x 3 3/8”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4” 4 DROT24 19 3/4” x 21” x 3 3/8”

UT3024 X 90 4ROT 2 DR1536 14 9/16” x 35 1/2” 12 7/8” x 34” 2 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT30 25 3/4” x 21” x 3 3/8

UT3624 X 90 4ROT 2 DR1836 17 9/16” x 35 1/2” 15 7/8” x 34” 2 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT36 31 3/4” x 21” x 3 3/8”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT15 10 3/4” x 21” x 3 3/8”

UT1824 X 96 4ROT 1 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 S1824 16 3/16” x 22 1/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT18 13 3/4” x 21” x 3 3/8”


2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4” 4 DROT24 19 3/4” x 21” x 3 3/8”

UT3024 X 96 4ROT 2 DR1542 14 9/16” x 41 1/2” 12 7/8” x 40” 3 S3024 28 3/16” x 22 1/8” x 3/4”

2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT30 25 3/4” x 21” x 3 3/8

UT3624 X 96 4ROT 2 DR1842 17 9/16” x 41 1/2” 15 7/8” x 40” 3 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT36 31 3/4” x 21” x 3 3/8”

PART

S: T

ALL

CABI

NET


23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y

s DGI_BS NOT AVAILABLE FOR 35 OR 38 DOOR STYLES— USE DGI_S

OPEN FRAME DOOR


TOP DOOR ONLY




TOP DOOR ONLY








UTILITYWITHDEEPROLLOUTTRAYS•84”HIGH UT1224 X 84 4ROT 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

UT1524 X 84 4ROT 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”


UT2424 X 84 4ROT BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”













PART

S: T

ALL

CABI

NET

S


DOOR DRAWER BODy



Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V




UTILITYWITHFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS•84”HIGH UT1224 X 84 CC4ROT 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1224 10 3/16” x 22 1/8” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 DROTCC12 7 3/4” x 21” x 3 3/8”

UT1524 X 84 CC4ROT 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1524 13 3/16” x 22 1/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC15 10 3/4” x 21” x 3 3/8”


1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC18 13 3/4” x 21” x 3 3/8”

UT2424 X 84 CC4ROT BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 1 S2424 22 3/16” x 22 1/8” x 3/4”

2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4” 4 DROTCC24 19 3/4” x 21” x 3 3/8”


2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC30 25 3/4” x 21” x 3 3/8


2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC36 31 3/4” x 21” x 3 3/8”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC15 10 3/4” x 21” x 3 3/8”


1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC18 13 3/4” x 21” x 3 3/8”




2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC30 25 3/4” x 21” x 3 3/8


2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC36 31 3/4” x 21” x 3 3/8”


1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC15 10 3/4” x 21” x 3 3/8”


1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC18 13 3/4” x 21” x 3 3/8”




2 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC30 25 3/4” x 21” x 3 3/8


2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC36 31 3/4” x 21” x 3 3/8”

UTILITYWITHPANTRYSTORAGE•24”DEEPX84”HIGH UT3624 X 84 PCDS 2 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S3624 34 3/16” x 22 1/8” x 3/4”

2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”

2 PDSK18 12” x 45” x 4”

1 PSK36


2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”

2 PDSK18 12” x 45” x 4”

1 PSK36


2 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 1 PCKS36 25 5/8” x 45” x 7 1/2”

2 PDSK18 12” x 45” x 4”

1 PSK36

PART

S: T

ALL

CABI

NET



23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR


TOP DOOR ONLY




TOP DOOR ONLY



UTILITYWITHFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS•84”HIGH UT1224 X 84 CC4ROT 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

UT1524 X 84 CC4ROT 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”


UT2424 X 84 CC4ROT BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”













UTILITYWITHPANTRYSTORAGE•24”DEEPX84”HIGH UT3624 X 84 PCDS 2 DRMF1830 DROF1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 5/16” x 24 3/8”



PART

S: T

ALL

CABI

NET

S




DOOR DRAWER BODy



Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


VANITYLINENCABINETS•WITHADJUSTABLESHELVES VLC122184 AS 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 5 S1221 10 3/16” x 18 7/8” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4”

VLC152184 AS 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 5 S1521 13 3/16” x 18 7/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4”

VLC182184 AS 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 5 S1821 16 3/16” x 18 7/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4”

VLC242184 AS BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 5 S2421 22 3/16” x 18 7/8” x 3/4”

2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4”

VANITYLINENCABINETS•WITHDEEPROLLOUTTRAYS VLC122184 4ROT 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1221 10 3/16” x 18 7/8” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 DROT1221 7 3/4” x 18” x 3 3/8”

VLC152184 4ROT 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1521 13 3/16” x 18 7/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROT1521 10 3/4” x 18” x 3 3/8”

VLC182184 4ROT 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S1821 16 3/16” x 18 7/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROT1821 13 3/4” x 18” x 3 3/8”

VLC242184 4ROT BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 1 S2421 22 3/16” x 18 7/8” x 3/4”

2 DR1250 BUTT 11 3/4” x 49 1/4” 10 15/16” x 47 3/4” 4 DROT2421 19 3/4” x 18” x 3 3/8”

VANITYLINENCABINETS•WITHFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS VLC122184 CC4ROT 1 DR1230 11 9/16” x 29 1/2” 9 7/8” x 28” 1 S1221 10 3/16” x 18 7/8” x 3/4”

1 DR1250 11 9/16” x 49 1/4” 9 7/8” x 47 3/4” 4 DROTCC1221 7 3/4” x 18” x 3 3/8”

VLC152184 CC4ROT 1 DR1530 14 9/16” x 29 1/2” 12 7/8” x 28” 1 S1521 13 3/16” x 18 7/8” x 3/4”

1 DR1550 14 9/16” x 49 1/4” 12 7/8” x 47 3/4” 4 DROTCC1521 10 3/4” x 18” x 3 3/8”

VLC182184 CC4ROT 1 DR1830 17 9/16” x 29 1/2” 15 7/8” x 28” 1 S1821 16 3/16” x 18 7/8” x 3/4”

1 DR1850 17 9/16” x 49 1/4” 15 7/8” x 47 3/4” 4 DROTCC1821 13 3/4” x 18” x 3 3/8”

VLC242184 CC4ROT BUTT 2 DR1230 BUTT 11 3/4” x 29 1/2” 10 15/16” x 28” 1 S2421 22 3/16” x 18 7/8” x 3/4”


PART

S: V

ANIT

y CA

BIN

ETS

262 PARTS DIRECTORy: Vanity Linen Cabinets

23, 25, 26, 31, 32C, D5, J, K, M5, R, U, V

35, 38, D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y


OPEN FRAME DOOR


TOP DOOR ONLY




TOP DOOR ONLY



VANITYLINENCABINETS•WITHADJUSTABLESHELVES VLC122184 AS 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

VLC152184 AS 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

VLC182184 AS 1 DRMF1830 DROF1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 5/16” x 24 3/8”

VLC242184 AS BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”

VANITYLINENCABINETS•WITHDEEPROLLOUTTRAYS VLC122184 4ROT 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

VLC152184 4ROT 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

VLC182184 4ROT 1 DRMF1830 DROF1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 5/16” x 24 3/8”

VLC242184 4ROT BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”

VANITYLINENCABINETS•WITHFULLACCESSCUSHIONCLOSEDEEPROLLOUTTRAYS VLC122184 CC4ROT 1 DRMF1230 DROF1230 DGI-1230F 7 9/16” x 25 1/2” DGI-1230S 6 5/16” x 24 3/8”

VLC152184 CC4ROT 1 DRMF1530 DROF1530 DGI-1530F 10 9/16” x 25 1/2” DGI-1530S 9 5/16” x 24 3/8”

VLC182184 CC4ROT 1 DRMF1830 DROF1830 DGI-1830F 13 9/16” x 25 1/2” DGI-1830S 12 5/16” x 24 3/8”

VLC242184 CC4ROT BUTT 2 DRMF1230 BUTT DROF1230 BUTT DGI-1230F 7 9/16” x 25 1/2” sDGI-1230BS s7 3/8” x 24 3/8”

PART

S: V

ANIT

y CA

BIN

ETS

263PARTS DIRECTORy: Vanity Linen Cabinets




Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

VANITYBASE•311/8”HIGH VB12 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

VB15 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”



VB24 BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 1 DRB24 X 18DP WD DT 19 23/32” x 3 5/16” x 18”

VANITYBASEWITHFACTORYINSTALLEDWASTEBASKET•311/8”HIGH VWBT18 1 DRVWBT1827 ND 17 9/16” x 26 1/2” 15 7/8” x 25” N/A

VANITYSINKBASEWITHTOPDRAWERS•311/8”HIGH VAN36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 2 DRB10 X 18DP WD DT 6 7/32” x 3 5/16” x 18”

VAN42 2 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 2 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”


1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8”


2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8”


VANITYCOMBOSINKBASE•311/8”HIGH VSDB24 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

1 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VSDB30 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18

1 DRB12M X 18DP WD DT 7 23/32” x 6 11/16 x 18”

VSDB36 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”

1 DRB15M X 18DP WD DT 10 23/32” x 6 11/16” x 18”


1 DRB12M X 18DP WD DT 7 23/32” x 6 11/16 x 18”

VSDB48D BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 4 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

2 DRB12M X 18DP WD DT 7 23/32” x 6 11/16 x 18”

VSDB54D BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 4 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”

2 DRB15M X 18DP WD DT 10 23/32” x 6 11/16” x 18”

VSDB60D 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 4 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”

2 DRB15M X 18DP WD DT 10 23/32” x 6 11/16” x 18”

VSDB60C BUTT 4 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 2 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

1 DRB12M X 18DP WD DT 7 23/32” x 6 11/16 x 18”

VANITYCOMBOSINKBASE•18”DEEPX311/8”HIGH VSDB2418 1 DR1218V 11 9/16” x 20” 9 7/8” x 17 7/8” 1 DRB12 X 15DP WD DT 7 23/32” x 3 5/16” x 15”

1 DRB12M X 15DP WD DT 7 23/32” x 6 11/16” x 15”


1 DRB12M X 15DP WD DT 7 23/32” x 6 11/16” x 15”


1 DRB15M X 15DP WD DT 10 23/32” x 6 11/16” x 15”

PART

S: V

ANIT

y CA

BIN

ETS

264 PARTS DIRECTORy: Vanity Cabinets



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


Partial Overlay





VANITYBASE•311/8”HIGH VB12 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

VB15 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

VB18 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VB21 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

VB24 BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

VANITYBASEWITHFACTORYINSTALLEDWASTEBASKET•311/8”HIGH VWBT18 N/A N/A

VANITYSINKBASEWITHTOPDRAWERS•311/8”HIGH VAN36 3 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

VAN42 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VAN48 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VAN54 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

VAN60 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

VANITYCOMBOSINKBASE•311/8”HIGH VSDB24 3 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB30 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB36 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF15VD 14 9/16” x 13 3/8” DDF15D 12 7/8” x 10 13/16”

VSDB42 1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB48D BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

4 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB54D BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

4 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

2 DDF15VD 14 9/16” x 13 3/8” DDF15D 12 7/8” x 10 13/16”

VSDB60D 1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

4 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

2 DDF15VD 14 9/16” x 13 3/8” DDF15D 12 7/8” x 10 13/16”

VSDB60C BUTT 2 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VANITYCOMBOSINKBASE•18”DEEPX311/8”HIGH VSDB2418 3 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB3018 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16”

VSDB3618 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF15VD 14 9/16” x 13 3/8” DDF15D 12 7/8” x 10 13/16”

PART

S: V

ANIT

y CA

BIN

ETS

265PARTS DIRECTORy: Vanity Cabinets




Dimensions

D1, D3, D6, D9, EM1, M3, M6, M9, N, T, Y


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V

VANITYBASE•341/2”HIGH VB1234H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

VB1534H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”



VB2434H BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DRB24 X 18DP WD DT 19 23/32” x 3 5/16” x 18”

VANITYBASEWITHFACTORYINSTALLEDWASTEBASKET•341/2”HIGH VWBT1834H 1 DRVWBT1824 ND 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DRB18 X 18DP WD DT 13 23/32” x 3 5/16” x 18”

VANITYSINKBASEWITHTOPDRAWERS•341/2”HIGH VAN3634H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DRB10 X 18DP WD DT 6 7/32” x 3 5/16” x 18”

VAN4234H 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”


1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8”


2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8”


VANITYCOMBOSINKBASE•341/2”HIGH VSDB2434H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VSDB3034H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 2 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”


VSDB4234H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

2 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VSDB4834HD BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

4 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VSDB5434HD BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 2 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”

4 DRB15M X 18DP WD DT 10 23/32” x 6 11/16” x 18”

VSDB6034HD 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”

4 DRB15M X 18DP WD DT 10 23/32” x 6 11/16” x 18”

VSDB6034HC BUTT 4 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

2 DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VANITYCOMBOSINKBASE•18”DEEPX341/2”HIGH VSDB241834H 1 DR1224 11 9/16” x 23 7/8” 9 7/8” x 22 3/8” 2 DRB12M X 15DP WD DT 7 23/32” x 6 11/16” x 15”



PART

S: V

ANIT

y CA

BIN

ETS




23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


Partial Overlay





VANITYBASE•341/2”HIGH VB1234H 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

VB1534H 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

VB1834H 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VB2134H 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

VB2434H BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

VANITYBASEWITHFACTORYINSTALLEDWASTEBASKET•341/2”HIGH VWBT1834H 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VANITYSINKBASEWITHTOPDRAWERS•341/2”HIGH VAN3634H 3 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

VAN4234H 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VAN4834H 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

VAN5434H 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

VAN6034H 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

VANITYCOMBOSINKBASE•341/2”HIGH VSDB2434H 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB3034H 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB3634H 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

2 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16”

VSDB4234H 1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB4834HD BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

4 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB5434HD BUTT 1 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

4 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16”

VSDB6034HD 1 DDF30 29 9/16” x 5 13/16” DDF30 27 7/8” x 5 1/8”

2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

4 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16”

VSDB6034HC BUTT 2 DDF24 23 9/16” x 5 13/16” DDF24 21 7/8” x 5 1/8”

1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VANITYCOMBOSINKBASE•18”DEEPX341/2”HIGH VSDB241834H 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB301834H 1 DDF18 17 9/16” x 5 13/16” DDF18 15 7/8” x 5 1/8”

1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16”

VSDB361834H 1 DDF21 20 9/16” x 5 13/16” DDF21 18 7/8” x 5 1/8”

1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8”

2 DDF15M 14 9/16” x 11 27/32” DDF15D 12 7/8” x 10 13/16”

PART

S: V

ANIT

y CA

BIN

ETS

267PARTS DIRECTORy: Vanity Cabinets



Dimensions

D1, D3, D6, D9, M1, M3, M6, M9

For E, N, T, Y: Replace 5 9/16” with 5 1/8”

23, 25, 26, 31, 32, 35, 38

C, D5, J, K, M5, R, U, V




Dimensions

D1, D3, D6, D9, E,M1, M3, M6, M9,

N, T, Y

23, 25, 26, 31, 32, 35, 38

C, D5, J, K, M5, R, U, V

VANITYSINKBASE•311/8”HIGH VSB15 1 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

VSB18 1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

VSB21 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSB24 BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”


VSB30 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VSB33 2 DR1618V 16 1/16” x 20” 14 3/8” x 17 7/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”

VSB36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

VSB42 2 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSB48 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”


VSB60 4 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VANITYSINKBASE•18”DEEPX311/8”HIGH VSB2418 BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

VSB3018 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VSB3618 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

VANITYSINKFRONT VSF21 1 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSF24 BUTT 2 DR1218V BUTT 11 3/4” x 20” 10 15/16” x 17 7/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

VSF30 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VSF36 2 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

VSF42 2 DR2118V 20 9/16” x 20” 18 7/8” x 17 7/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSF48 2 DR1518V 14 9/16” x 20” 12 7/8” x 17 7/8” 2 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

1 DR1818V 17 9/16” x 20” 15 7/8” x 17 7/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

VANITYSINKBASE•341/2”HIGH VSB1534H 1 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

VSB1834H 1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”

VSB2134H 1 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 1 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSB2434H BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”


VSB3034H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VSB3334H 2 DR1624 16 1/16” x 23 7/8” 14 3/8” x 22 3/8” 1 DDF33 32 9/16” x 5 13/16” 30 7/8” x 5 1/8”

VSB3634H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

VSB4234H 2 DR2124 20 9/16” x 23 7/8” 18 7/8” x 22 3/8” 2 DDF21 20 9/16” x 5 13/16” 18 7/8” x 5 1/8”

VSB4834H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DDF15 14 9/16” x 5 13/16” 12 7/8” x 5 1/8”

1 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF18 17 9/16” x 5 13/16” 15 7/8” x 5 1/8”


VSB6034H 4 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 2 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VANITYSINKBASE•18”DEEPX341/2”HIGH VSB241834H BUTT 2 DR1224 BUTT 11 3/4” x 23 7/8” 10 15/16” x 22 3/8” 1 DDF24 23 9/16” x 5 13/16” 21 7/8” x 5 1/8”

VSB301834H 2 DR1524 14 9/16” x 23 7/8” 12 7/8” x 22 3/8” 1 DDF30 29 9/16” x 5 13/16” 27 7/8” x 5 1/8”

VSB361834H 2 DR1824 17 9/16” x 23 7/8” 15 7/8” x 22 3/8” 1 DDF36 35 9/16” x 5 13/16” 33 7/8” x 5 1/8”

PART

S: V

ANIT

y CA

BIN

ETS






Dimensions



23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


STANDARDHEIGHTVANITYDRAWERBASE•311/8”HIGH VDB12 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

1 DDF12VD 11 9/16” x 13 3/8” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VDB15 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”






BASEHEIGHTVANITYDRAWERBASE•341/2”HIGH VDB1234H 1 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”

2 DDF12M 11 9/16” x 11 27/32” DDF12D 9 7/8” x 10 13/16” DRB12M X 18DP WD DT 7 23/32” x 6 11/16” x 18”

VDB1534H 1 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”






FILEDRAWERBASECABINET FDB1821 2 DDF18M 17 9/16” x 11 27/32” DDF18D 15 7/8” x 10 13/16” FDB1821 KIT

FDB1824 2 DDF18M 17 9/16” x 11 27/32” DDF18D 15 7/8” x 10 13/16” FDB1824 KIT

KNEEHOLEDRAWERCABINET KDC27/21 1 DDFKDC27/21 20 9/16” x 4 7/16” DDFKDC27/21 18 7/8” x 3 3/4” DRBKDC27/21 X 15DP DT 16 23/32” x 2 15/32” x 15”

KDC33/27 1 DDFKDC33/27 26 9/16” x 4 7/16” DDFKDC33/27 24 7/8” x 3 3/4” DRBKDC33/27 X 15DP DT 22 23/32” x 2 15/32” x 15”

KDC36/33 1 DDFKDC36/33 32 9/16” x 4 7/16” DDFKDC36/33 30 7/8” x 3 3/4” DRBKDC36/33 X 15DP DT 28 23/32” x 2 15/32” x 15”

DESKDRAWERBASECABINET•21”DEEP DDR1221 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 X 18DP WD DT 7 23/32” x 3 5/16” x 18”


DDR1521 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 X 18DP WD DT 10 23/32” x 3 5/16” x 18”








DESKDRAWERBASECABINET•24”DEEP DDR1224 2 DDF12 11 9/16” x 5 13/16” DDF12 9 7/8” x 5 1/8” DRB12 CONC WD DT HG 8 1/2” x 3 19/32” x 21”


DDR1524 2 DDF15 14 9/16” x 5 13/16” DDF15 12 7/8” x 5 1/8” DRB15 CONC WD DT HG 11 1/2” x 3 19/32” x 21”








PART

S: V

ANIT

y CA

BIN

ETS

269PARTS DIRECTORy: Vanity/Desk Cabinets

DECORATORMATCHINGDOORSFull Overlay


23, 25, 26, 31, 32, 35, 38C, D5, J, K, M5, R, U, V


Partial Overlay

D1, D3, D6, D9, E, M1, M3, M6, M9, N, T, Y**For E, N, T, Y:


Qty

DECORATORMATCHINGBASEDOORS DMDB 1 DR2430 23 9/16” x 29 1/2” 1 DR2430 21 7/8” x 28”

DMDBEA12 1 DR1230 11 9/16” x 29 1/2” 1 DR1230 9 7/8” x 28”

DECORATORMATCHINGDESKDOORS DMDD21 1 DR2124 20 9/16” x 23 7/8” 1 DR2124 18 7/8” x 22 3/8”

DMDD24 1 DR2424 23 9/16” x 23 7/8” 1 DR2424 21 7/8” x 22 3/8”

DECORATORMATCHINGDISHWASHERDOORS DMDAP 1 DR2118 20 9/16” x 17 1/2” 2 DR1218 9 7/8” x 16”

DMDAPT 1 DR2124 20 9/16” x 23 7/8” 2 DR1224 9 7/8” x 22 3/8”

DECORATORMATCHINGTALLDOORS DMDT8412 1 DR1230 11 9/16” x 29 1/2” 1 DR1230 9 7/8” x 28”

1 DR1250 11 9/16” x 49 1/4” 1 DR1250 9 7/8” x 47 3/4”

DMDT8424 2 DR1230 11 9/16” x 29 1/2” 2 DR1230 9 7/8” x 28”

2 DR1250 11 9/16” x 49 1/4” 2 DR1250 9 7/8” x 47 3/4”

DMDT9012 1 DR1236 11 9/16” x 35 1/2” 1 DR1236 9 7/8” x 34”

1 DR1250 11 9/16” x 49 1/4” 1 DR1250 9 7/8” x 47 3/4”

DMDT9024 2 DR1236 11 9/16” x 35 1/2” 2 DR1236 9 7/8” x 34”

2 DR1250 11 9/16” x 49 1/4” 2 DR1250 9 7/8” x 47 3/4”

DMDT9612 1 DR1242 11 9/16” x 41 1/2” 1 DR1242 9 7/8” x 40”

1 DR1250 11 9/16” x 49 1/4” 1 DR1250 9 7/8” x 47 3/4”

DMDT9624 2 DR1242 11 9/16” x 41 1/2” 2 DR1242 9 7/8” x 40”

2 DR1250 11 9/16” x 49 1/4” 2 DR1250 9 7/8” x 47 3/4”

DECORATORMATCHINGWALLDOORS DMDW18 1 DR1218 11 9/16” x 17 1/2” 1 DR1218 9 7/8” x 16”

DMDW24 1 DR1224 11 9/16” x 23 7/8” 1 DR1224 9 7/8” x 22 3/8”

DMDW30 1 DR1230 11 9/16” x 29 1/2” 1 DR1230 9 7/8” x 28”

DMDW36 1 DR1236 11 9/16” x 35 1/2” 1 DR1236 9 7/8” x 34”

DMDW42 1 DR1242 11 9/16” x 41 1/2” 1 DR1242 9 7/8” x 40”

DECORATORMATCHINGVANITYDOORS DMDV 1 DR2118V 20 9/16” x 20” 1 DR2118V 18 7/8” x 17 7/8”

1 DDF21 20 9/16” x 5 13/16” 1 DDF21 18 7/8” x 5 9/16”

PART

S: A

CCES

SORI

ES270 PARTS DIRECTORy: Accessories

MISCELLANEOUSPARTS&ACCESSORIES

HINGESPart Name Description

HINGE 170 FRAMED Door-to-frame hinge for BER, BSS, CAR or WER cabinet

HINGE ER Hinge for BER, BSS, CAR or WER cabinet

HINGE KIT TRI-VIEW Hinge Kit for Tri-View Mirror

HINGE OV FACEMOUNT Full Overlay (FOL) face-mount oven hinge

HINGE TILT OUT TRAY Hinge for Factory Installed Tilt-Out Tray

HINGE UPGRADE FOL Full Overly (FOL) door hinge

HINGE UPGRADE SOL 6-Way Adjustable Partial Overlay (POL) door hinge

PCSK HINGE Center Hinge for PCSK36

GLIDES/TRACKS/CHANNELSFOR24”DEEPBASE,24”DEEPDESKORDEEPROLLOUTTRAYS

Part Name Description

CHANNEL SS1 L Left channel for standard Deep Roll Out Tray

CHANNEL SS1 R Right channel for standard Deep Roll Out Tray

GLIDE CCL24 Left CushionClose Glide (drawers only)

GLIDE CCR24 Right CushionClose Glide (drawers only)

GLIDE DROTCCL24 Left Full Extension CushionClose Glide for DROTCC, BPPOKCC, ROTDKCC

GLIDE DROTCCR24 Right Full Extension CushionClose Glide for DROTCC, BPPOKCC, ROTDKCC

GLIDE FAL24 Left Full Access Hidden Glide

GLIDE FAR24 Right Full Access Hidden Glide

TRACK GA 21L Left track for Deep Roll Out Tray

TRACK GA 21R Right track for Deep Roll Out Tray

TRACKS/CHANNELSFOR21”DEEPVANITY,21”DEEPDESKORVANITYLINENPart Name Description

CHANNEL V L Left channel for 21” deep Vanity, Desk or Vanity Linen

CHANNEL V R Right channel for 21” deep Vanity, Desk or Vanity Linen

TRACK V L Left track for 21” deep Vanity, Desk, or Vanity Linen

TRACK V R Right track for 21” deep Vanity, Desk or Vanity Linen

TRACKS/CHANNELSFOR18”DEEPVANITYANDKNEEHOLEDRAWERCABINETPart Name Description

CHANNEL V 18L Left channel for 18” deep Vanity

CHANNEL V 18R Right channel for 18” deep Vanity

GLIDE CCL18 Left CushionClose 18” Glide for Kneehole Drawer

GLIDE CCR18 Right CushionClose 18” Glide for Kneehole Drawer

GLIDE FAL18 Left Full Access Hidden 18” Glide for Kneehole Drawer

GLIDE FAR18 Right Full Access Hidden 18” Glide for Kneehole Drawer

TRACK GA 16L Left track for 18” deep Vanity

TRACK GA 16R Right track for 18” deep Vanity

CLIPS/BRACKETSPart Name Description

BRACKET CHAN B Back bracket for Deep Roll Out Tray

BRACKET GL OV/PBC FL Back bracket for Oven or Peninsula Base Corner Full Access Hidden Glide

BRACKET GL B DROTFAL Left back bracket for GLIDE DROTCC__24

BRACKET GL B DROTFAR Right back bracket for GLIDE DROTCC__24

BRACKET GLIDE B FL Back bracket for Base Full Access Hidden Glide

BRACKET GLIDE DROTFA Front bracket for GLIDE DROTCC_24

BRACKET GLIDE PB FL Back bracket for Peninsula Base Full Access Hidden Glide

BRACKET RED DP REAR Back bracket for reduced depth Side-Mounted Glide

CLIP DDF Drawer front clip

CLIP LOCK 3/4 4 PK Package of four locking shelf rests for Base and Tall cabinet shelves

CLIP MIRROR MCM FOL Clip for MCM1530 Full Overlay Mirror door

CLIP MIRROR MCM POL Clip for MCM1530 Partial Overlay Mirror door

CLIP MIRROR TRIVIEW Clip for TV3030/TV3630 Tri-View Mirror door

CLIP PILASTER Shelf Rest for PSK36 Shelf & Pilaster Kit

CLIP REAR SHELF Middle shelf rest for 27” or wider Wall cabinet shelf

CLIP SHELF NP SPIN Locking shelf clip for NP Spin Units (Base 4 required, Wall 5 required)

DRB MOUNT CLIP L Drawer release clip for Left Full Access Hidden Glide

DRB MOUNT CLIP R Drawer release clip for Right Full Access Hidden Glide

DROTFA MOUNT CLIP L Left release clip for GLIDE DROTCC_24

DROTFA MOUNT CLIP R Right release clip for GLIDE DROTCC_24

GLIDE CLIPHET UNI Universal Drawer Clip for Full Access Hidden Glide or CushionClose Glide

MOUNT BRACKET GA SS1 Bracket for Side-Mounted Channels

SHELF REST METAL 4PK Package of four metal shelf rests for Wall or Bookshelf shelves

SHELF REST METAL 12 Package of twelve metal shelf rests for Wall or Bookshelf shelves

SHELF REST MFD PK Package of eight shelf rest for Mullion Frame Door Wall cabinet shelves

SHELF REST OSS 6PK Clips for Oven Support Shelf Kit

SHELF SUPT ADJ BASE Middle shelf rest for 27” or wider Base cabinet shelf

BATTEN(FULLOVERLAYDOOR)Part Name Description

BATTEN DR18HIGH FOL Batten for 18” high Full Overlay door

BATTEN DR21DSB FOL Batten for Full Overlay Deep Sink Base door






BATTEN(PARTIALOVERLAYDOOR)Part Name Description

BATTEN DR18HIGH POL Batten for 18” high Partial Overlay door

BATTEN DR21DSB POL Batten for Partial Overlay Deep Sink Base door







SCREWSPart Name Description

SCREW BTN STRIP Batten strip screw

SCREW CHANNEL Channel installation screw

SCREW DDF 1” Drawer Front installation screw

SCREW EXTENDER RD Screw for RD extender

SCREW GLIDE HG Adjustment screw for Full Access Hidden Glide

SCREW HINGE/DR Hinge-to-door screw

SCREW HINGE/FR Hinge-to-frame screw

SCREW TRACK Track screw

PART

S: A

CCES

SORI

ES

271 PARTS DIRECTORy: Accessories

MISCELLANEOUSPARTS&ACCESSORIES

MISCELLANEOUSPart Name Description

BASE CORNER BLOCK WD Plywood corner block

BFP3 FRONT FILLER Filler for BFP3 Base Filler Pull Out

BPP9 KIT Kit for BPP9 Base Pull Out

BTDP9 KIT Kit for BTDP9 Base Tray Divider Pull Out

BUMPER CLEAR Door bumper

BWBT15 KIT Wastebasket kit for BWBT15

BWBT15-2 KIT Wastebasket kit for BWBT15-2

BWBT18-2 KIT Wastebasket kit for BWBT18-2

CORNER BRACKET Corner block

COVER CAP 10MM TAN Tan cover cap for cabinet backs

COVER CAP 10MM WHT White cover cap for cabinet backs

DWBT1821 KIT Wastebasket kit for DWBT1821

DWBT1824 KIT Wastebasket kit for DWBT1824

FDB1821 KIT Replacement kit for FDB1821

FDB1824 KIT Replacement kit for FDB1824

FRAME SPACER BPP9 Unit stabilizer and frame spacer for BPP9 and BTDP9

KNOB SDC Wooden knob for SDC/BSDC6

LATCH TILT OUT TRAY Latch for Factory Installed Tilt-Out Tray

MAG CATCH TV BLK Black magnetic catch for TV3030/TV3630 Tri-View Mirror

MAG CATCH TV WHT White magnetic catch for TV3030/TV3630 Tri-View Mirror

MC SHELF HDWE Package of 4 shelf clips for MC/MCM cabinet

MIRROR TV3030 Mirror for TV3030

MIRROR TV3630 Mirror for TV3630

PK36 Pilaster kit for PSK36 Shelf & Pilaster Kit

PULL TRIVIEW Chrome pull for TV3030/TV3630 Tri-View Mirror

ROT DIVIDER KIT Divider for ROTDK12/ROTDK15

ROT PROTECTOR End plastic protector on Deep Roll Out Trays

TRAY ST TILT OUT 11 Stainless Tray ONLY for Factory Installed Tilt-Out



TRAY TILT OUT 11 Plastic Tray ONLY for Factory Installed Tilt-Out



VWBT1821 KIT Wastebasket kit for VWBT18 or VWBT1834H

WCC DOWEL Dowel for WCC cabinet

WCC24 4PC RAIL Top and bottom dowel rails for WCC2415



WFP330 FRONT FILLER Filler for WFP330 Wall Filler Pull Out



WOOD SPIN HOLE PLUG Plug for Wood Spin shelf

MISCELLANEOUSSHELVINGPart Name Description

BS18 SHELF 1PK Single Shelf for BSPLY18

BS18 SHELF 4PK 4 Pack Shelf Kit for BSPLY18







PCSK36 SHELF Shelf for PCSK36 Pantry Swing Out Kit

PDSK18 SHELF Shelf for PDSK18 Pantry Door Shelf Kit

S369 Shelf for PSK36 Shelf & Pilaster Kit

WCMSC2412 SHELF Microwave shelf for WCMSC241236 BUTT

WCMSC2712 SHELF Microwave shelf for WCMSC271236 BUTT

WMSC2712 SHELF Microwave shelf for WMSC271236 BUTT

WMSC2718 SHELF Microwave shelf for WMSC271836 BUTT

WMSC3012 SHELF Microwave shelf for WMSC301236

WOODSPINSHELFUNITS-ALLPLYWOODCONSTRUCTIONPart Name Description

BSS33 SHELF WD NP PLY Wood spin unit and Plywood shelf for BSS33 WD




CBS SHELF WD NP PLY Wood spin unit and Plywood shelf for CBS36 WD

CWS24 SHELF WD NP PLY Wood spin unit and Plywood shelf for

CWS2430 WD, CWS2436 WD, CWS2442 WD and CWTS2448 WD

CWS24 SHELFWDNPMIPLY Wood spin unit and Matching Interior Plywood shelf for

CWS2430 WD, CWS2436 WD, CWS2442 WD and CWTS2448 WD

WHITEPLASTICSPINSHELVESANDPARTSPart Name Description

BSSCAR HUB RAS With rollers, fits into shelf for pole attachment

BSSCWSCAR BRKT RAS Top and bottom mounting brackets

BSSCWSCAR COLLAR ASM Locking adjustable shelf collar for top shelf

BSSCWSCAR T-SHAFT RA Metal Post on which shelves spin (1 required)

BSS33 SHELF RAS White spin shelf for BSS33/BSS3336/BSS3633 (2 required)

BSS36 SHELF RAS White spin shelf for BSS36 (2 required)

CAR SHELF RAS White spin shelf for CAR36 (2 required)

CBS SHELF RAS White spin shelf for CBS36 (2 required)

CWS HUB RAS With rollers, fits into shelf for pole attachment

CWS SHELF RAS White spin shelf for CWS2430 (2 required)

PART

S: A

CCES

SORI

ES272 PARTS DIRECTORy: Accessories

Index

IND

EX

273

274 INDEX: A–BIN

DEX

SKU Spec

AAcanthus Capital ASC 196Acanthus Insert Molding ASI8 185Acanthus Leaf Onlay ALO 197Acanthus Onlay ASPO 196Accent Turned Leg ATL 191Adjustable Shelf S__ 145, 167Adjustable Shelf Kit SK__ 145, 167Afton Glass Insert Door Option OFD AFTON 52Alcove Leaded Glass Insert Door Option OFD ALCOVE 52All Plywood Construction APC 42Angle Crown Molding ACM8 183Angled Outside Corner Molding AOSC8 189Appliance Garage AG/AGS 82Applique Valance VA__D 85Arched Valance VA__C 85Aster Decorative Block FB/BB ASTER 181Asymmetrical Base Easy Reach BER3336/BER3633 117Asymmetrical Base Super Susan Plastic Spin BSS3336/BSS3633 119Asymmetrical Base Super Susan Wood Spin BSS3336 WD/BSS3633 WD 118

BBase Bookshelves BSPLY____ 134Base Cabinet Construction — 31Base Cabinet Decorator Matching Doors DMDB 174Base Cabinet with Cutting Board Door Rack B18 CBDR 98Base Cabinet with Factory Installed CushionClose Roll Out Tray Divider B__CCROTD 98Base Cabinet with Factory Installed Drawer Organizer B__CC/CD/CHB/KS/KSCC/MPCD/SDI/WTCD 102Base Cabinet with Factory Installed Roll Out Tray Divider B__ROTD 98Base Cabinet with Plastic Bag Door Storage B__ PBDSU 98Base Cabinet, Four CushionClose DROT B__CC4T 97Base Cabinet, Four DROT B__4T 95Base Cabinet, No Drawer TB9 90Base Cabinet, No Drawer with Tray Divider and Shelf TB9 TDS 90Base Cabinet, One CushionClose DROT and Shelf B__CCFWT 95Base Cabinet, One DROT and Shelf B__FWT 93Base Cabinet, One Factory Installed Wastebasket BWBT15 99Base Cabinet, Six CushionClose DROT B45 CC6T 97Base Cabinet, Six DROT B45 6T 95Base Cabinet, Standard B__ 91Base Cabinet, Three CushionClose DROT and Shelf B45 CC3T 96Base Cabinet, Three DROT and Shelf B45 3T 94Base Cabinet, Two CushionClose DROT B__CC2FWT 96Base Cabinet, Two CushionClose DROT and Shelf B__CC2T 96Base Cabinet, Two DROT B__2FWT 94Base Cabinet, Two DROT and Shelf B__2T 94Base Cabinet, Two Factory Installed Wastebaskets BWBT__-2 99Base Column Filler B__C32734 179Base Corner Filler BCF27 177Base Corner Overlay Filler BOF3X3 177Base Easy Reach BER33/BER36 117Base Easy Reach, Asymmetrical BER3336/BER3633 117Base End Angle BEA__ 122


IND

EX

275INDEX: B–C

SKU Spec

BBase End Panel BEP34__ 171Base Filler Pull Out BFP3 125Base Microwave Cabinet BMC__ 122Base Oven Cabinet Universal BOCU__ 122Base Pantry Pull Out BPP9 90Base Pot & Pan Cabinet with CushionClose Organizer B__CCBPPO 100Base Pot & Pan Organizer Cabinet B__BPPO 99Base Pot & Pan Organizer Kit with CushionClose BPPOKCC__ 127Base Pot & Pan Organizer Kit BPPOK__ 127Base Recycling Kit BR2B15 128Base Spice Drawer Cabinet BSDC6 121Base Super Susan Plastic Spin BSS33/BSS36 118Base Super Susan Plastic Spin, Asymmetrical BSS3336/BSS3633 119Base Super Susan Wood Spin BSS33 WD/BSS36 WD 118Base Super Susan Wood Spin, Asymmetrical BSS3336 WD/BSS3633 WD 118Base Toe Kick BTK8__ 190Base Tray Divider Pull Out BTDP9 90Base Turned Leg BTL 191Base Wine Rack Cabinet BWRC6 121Batten Molding BM8 WD 186BEA12 Base Cabinet Decorator Matching Doors DMDBEA12 174BeautyGuard Finishing System — 28Blind Corner Base BLB__ 114Blind Corner Base Dimensions Chart — 114Blind Corner Base Installation Chart — 115Blind Corner Closure BLC1515 173Blind Peninsula Corner Base PBC24__ 116Blind Peninsula Corner Base Installation Chart — 116Blind Peninsula Wall Cabinet BLPW24__ 74Blind Peninsula Wall Cabinet Installation Chart — 75Blind Wall Cabinet BLW__ 70Blind Wall Cabinet Dimensions Chart — 73Blind Wall Cabinet Installation Chart — 72Bookshelves BSPLY___ 134

CCabinet Angle Molding CAM8 189Cabinet Care — 28Cabinet Dimensions — 34Cabinet Front Only Option CFO 48Cabinet Specifications — 27Cabinet Tray Divider TD3 125, 145, 151Center Beaded Insert Molding CBE8 186Certification — 26Chair Rail Molding CR8 184Chopping Block Kit CHBK__ 123Classic Crown Molding CCM8 VNR 182Clear Glass Insert Door Option __FD CLEAR 52Column Fillers __C 179Construction Comparison Chart — 43Construction Options — 39Construction Options Legend — 40Construction Options Upcharges — 41

276 INDEX: C–DIN

DEX

SKU Spec

CContents — 3Contents, Parts Directory — 206 Corner Appliance Garage AG2418/AG2718 82Corner Base Carousel CAR36/CAR36 WD 120Corner Base, Plastic Spin CBS36 119Corner Base, Wood Spin CBS36 WD 119Corner Lazy Susan CLS45F 125Corner Sink Base CSB36 109, 120Corner Sink Front CSF36/CSF42 110, 120Corner Wall CW24__ 76Corner Wall with Tambour CWT2448 78Corner Wall with Tambour, Plastic Spin CWTS2448 79Corner Wall with Tambour, Wood Spin CWTS2448 WD 78Corner Wall, Plastic Spin CWS2430 78Corner Wall, Wood Spin CWS24__ WD 77Counter Support CS12 197Countertop Edge Molding CTM8 WD 184Cover Cap COVER CAP __ 198Crown Molding CM8 WD 182Crown Valance V__CR 85CushionClose Door Buffer CUSH CLOSE DR BUFFER 198CushionClose Glide Option CCO 45Cutlery Divider Kit CDK__ 125Cutting Board Door Rack Kit CBDRK18 127Cutting Center Kit CCK__ 123

DDecorative Blocks FB/BB 180Decorative Hardware KNOBS/PULLS 201Decorative Inside Corner Molding ICM8 188Decorator Door Clips DGI CLIP BAG__ 54Decorator Matching Doors DMD__ 174Deep Roll Out Tray DROT__ 126, 136, 146, 167Deep Roll Out Tray Kit DROT__-4K 146, 167Deep Roll Out Tray Kit with Cushion Close DROTCC__-4K 146, 167Deep Roll Out Tray with Cushion Close DROTCC__ 126, 136, 146, 167Deep Sink Base Cabinet DSB__ 1B 109Deep Wood Tall End Panel DWTEP__ 172Dentil Molding DM8 WD 185Dentil Pilaster Molding DPM8 WD 187Derbyshire Seeded Glass Insert Door Option __FD DERBYSHIRE 52Desk Decorator Matching Doors DMDD__ 174Desk Door Cabinet DDO__ 132Desk Drawer Cabinet DDR__ 133Desk End Panel DEP 170Desk Wastebasket Cabinet DWBT18__ 132Dishwasher Decorator Matching Doors DMDAP/T 175Dishwasher Insert Panel DIP 173Dishwasher Return DWR3 170Door/Drawer Overlays Specifications POL/FOL 32Door Style Collections — 5


IND

EX

277INDEX: D–H

SKU Spec

D Double Oven Cabinet OVD__ 150Drawer Base Cabinet DB__ 105Drawer Base with Factory Installed Drawer Organizer DB__CC/CD/CHB/KS/KSCC/MCPD/SDI/WTCD 106Drop-In Range Front DORF30 173Dummy Drawer Front Fastener DDF FASTENER 198 EEgg and Dart Molding EDM8 185End Panels __EP 171

FFern Glass Insert Door Option __FD FERN 52File Drawer Base Cabinet FDB18__ 132Filler Extension, Fluted Beaded Reversible FBF E3/FBF E342 178Filler Extension, Universal UF E3/UF E342 176Filler Overlays __OF 177Filler, Base Column B__C 179Filler, Base Corner BCF27 177Filler, Fluted Beaded Reversible 3” FBF3 178Filler, Fluted Beaded Reversible 6” FBF6 178Filler, Tall Column T__C 179Filler, Universal UF/OVSF 176Filler, Wall Column W__C 179Fincastle Glass Insert Door Option OFD FINCASTLE 52Finished Paneling FP__ 172Finished Shelf FS__12 173Finishing Systems Specifications — 28French Carved Leg FCL 191Full Access Hidden Glides System — 33Full Turned Post Beaded POST234B 192Full Turned Post Fluted POST234F 192Furniture Ends Option FE 44

GGlass Insert Sizes and Nomenclature DGI__ 219Glass Shelf Kit GSK__ 86Grape Onlay GRPO 195Grid Glass Insert Door Option __FD GRID 53Grooved Base End Panel BEP34 GROOVED 171Grooved Finished Paneling FP__ GROOVED 172Grooved Tall End Panel TEP__ GROOVED 171Grooved Wall End Panel WEP__ GROOVED 171

H Hardware Specifications — 33Hardware, Decorative KNOB/PULL 201Heat Shield Kit HSK 129, 151Hinges — 33

278 INDEX: I–OIN

DEX

SKU Spec

IIncreased Depth Cabinet Option ID 47Inset Light Rail Molding ILR8 183Inside Corner Molding QM8 WD 188Installation Guidelines — 36Installation Items SCREWS/CAPS/STAIN 198Inverted Frame Cabinet Option IF 44Ivy Insert Molding IVI8 184

KKeswick Glass Insert Door Option OFD KESWICK 53Keyboard Tray KBT30 136Kneehole Drawer Cabinet KDC__ 134, 163Knife Section Cutting Center Kit KSCCK__ 124Knife Section Kit KSK__ 125

LLarge Acanthus Corbel AC313 196Large Cove Corbel CC212 197Large Cove Molding LCVM8 183Large Grape Corbel GC313 195Large Grape Ornament LGO 195Large Rope Molding LRM8 185Large Rosette Corbel RC313 194Large Shell Ornament LSO 194Legs, Decorative __L 191Library Molding LBM8 184Light Rail Molding LR8/LR8 WD 183

MMatching Interior Cabinet Option MI 49Medicine Cabinet MC/MCM 163Meredith Glass Insert Door Option OFD MEREDITH 53Microwave Base Cabinets BMC__ 122Microwave Wall Cabinets WCMSC/WMSC 64Mirror Molding MM6 184Molded Plastic Cutlery Divider Kit MPCDK__ 124Moldings __8/__6 182Mullion Frame Door Option MFD 50 OOasis Glass Insert Door Option OFD OASIS 53Ogee Molding OGE8 186Ogee Pilaster Molding OGP8 187Open Frame Door Option OFD 50Outside Corner Molding OCM8 188Oven Cabinet, Base Universal BOCU__ 122Oven Cabinet, Double OVD__ 150Oven Cabinet, Single OVS__ 147Oven Support Shelf OSS__ 151Overlay Dimensions — 32Overlay Filler __F 177


IND

EX

279INDEX: P–S

SKU Spec

PPantry Door Shelf Kit PDSK18 144Pantry Swing Out Kit PCSK36 144Parts Directory Section — 206Peninsula Base Cabinet PB__ 104Peninsula Corner Wall Cabinet PWCW24__ 79Peninsula Wall Cabinet PW__ 66Plastic Bag Door Storage Unit PBDSU__ 128Plate Rail Molding PRM6 WD 184Plinth Decorative Block FB/BB PLINTH 181Plywood Veneered Sides Option PVS 42Premium Finish Cabinet Option __GLAZE 45Prepped for Glass Insert Door Option __FD PREPPED 54Putty Stick PUTTY STICK 199Pyramid Decorative Block FB/BB PYRAMID 180

QQuarter Round Molding QR8 189

RRaised Panel Arched Valance V__ RP 85Range Hood Blower RH VENT _ 84Range Hood Blower Recirculating RHVENT _R 84Range Hood Chimney RHC__ 83Range Hood, Arched RH__24 AV 83Range Hood, Straight RH__24 SV 83Range Hood, Tapered RH__24 T 83Reduced Depth Cabinet Option RD 46Refrigerator Return Panel RR__ 173Refrigerator Wall Cabinet W__X 24 DP 62Ribbed Glass Insert Door Option __FD RIBBED 53Rice Paper Glass Insert Door Option __FD RICE PAPER 53Roll Out Tray Divider Kit ROTDK__ 126Roll Out Tray Divider Kit with CushionClose ROTDKCC__ 126Rope Molding RM8 WD 185Rosette Decorative Block FB/BB ROSETTE 180

SScalloped Valance VAL__ 86Screw Cover Caps COVER CAP __ 198Screws, Installation SCREW INST 2.5 BX100 198Scribe Molding SM8 WD 186Shaker Accent Molding SAM8 WD 187Shaker Valance V__SH 86Shelf End Base SEB 121Shelf End Peninsula Base SEPB 121Shelf End Wall SEW__ 81Shelf Rests SHELF RESTS 33, 198Shelf Under Cabinet SUC36T 87Shelf Under Cabinet Organizer SUCO__ 134Shelf, Adjustable S__ 145, 167

280 INDEX: SIN

DEX

SKU Spec

SShelf, Finished FS__12 173Shelf Kit, Adjustable SK__ 145, 167Shell Onlay SHPO 194Side-Mounted Drawer Glides — 33Single Bead Accent Molding SBAM8 WD 187Single Bead Molding SBM8 188Single Oven Cabinet OVS__ 147Single Oven Cabinet with Base Pot and Pan Organizer OVS____BPPO 148Single Oven Cabinet with Base Pot and Pan Organizer with Cushion Close OVS____CCBPPO 149Sink Base Door Storage Unit SBDSU__ 128Sink Base Multi-Storage Cabinet SBMS3_ 1B STO 113Sink Base Multi-Storage Kit SBMSS__ KIT 129Sink Base Multi-Storage Shelf SBMSS 128Sink Base with Factory Installed Tilt-Out Tray(s) SB__STO/TO 111Sink/Range Base Cabinet SB__ 108Sink/Range Front SF__ 110Sink/Vanity Front Floor FL__ 170Sink/Vanity Front Return SFR 170Sliding Towel Bar STB 127Small Acanthus Corbel AC58 196Small Cove Corbel CC29 197Small Cove Molding SCVM8 182Small Dentil Insert Molding SDE8 WD 185Small Grape Corbel GC58 195Small Grape Ornament SGO 195Small Rosette Corbel RC58 194Small Shell Ornament SSO 194Small Single Bead Molding SSBM8 188Soffit Crown Molding SCM8 WD 182Soffit Spacer SOF96 173Spice Drawer Cabinet SDC__ 80Spice Drawer Insert Kit SDIK__ 125Spice Rack Kit SRK__ 87Split Post SPLT POST80__ 192Spray Stain SPRAY STAIN 199Stain Kits STAIN 199Standard Cabinet Specifications — 25Stem Glass Holder SGH36U 87Storage Cube SC_ 80Straight Appliance Garage AGS24 82Straight Trim Molding UM8 WD 189Straight Valance VA__ 86Swirl Insert Molding SWI8 186

SKU Spec

TTall Acanthus Capital TASC 196Tall Bookshelves BSPLY____ 135Tall Cabinet Decorator Matching Doors DMDT 175Tall Column Filler T__C 179Tall End Panel TEP__ 171Tapered Leg TPL 191Tatting Glass Insert Door Option __FD TATTING 54Toe Kick BTK8__ 190Touch Up Marker TU MARKER 199Traditional Classic Crown Molding TCCM8 WD 183Traditional Light Rail Molding TLR8 183Traditional Split Block SPLT BLOCK 2__T 193Traditional Split Collar SPLT COLLAR T 193Traditional Valance V__T 86Tray Divider, Cabinet TD3 125, 145, 151Triple Bead Accent Molding TBAM8 WD 187Triple Bead Edge Molding TBE8 186Triple Bead Molding TBM8 187Tri-View Mirror TV__ 163TuffTech Finishing System — 28 UUniversal Filler UF/OVSF 176Universal Filler Extension UF E3/UF E342 176Utility Cabinet UT 138Utility Cabinet Accessories S/SK/DROT/PSK/TD3 144Utility Cabinet Shelf and Pilaster Kit PSK36 145Utility Cabinet with Adjustable Shelves UT__AS 140Utility Cabinet with CushionClose Deep Roll Out Trays UT__CC4ROT 142Utility Cabinet with Deep Roll Out Trays UT__4ROT 141Utility Cabinet with Pantry Storage UT__ PCDS 143

VValances V/VA/VAL 85Valet Cabinet VC2436 BUTT 163Vanity Base, 31 1/8” High VB__ 154Vanity Base, 34 1/2” High VB__H 159Vanity Cabinet Decorator Matching Doors DMDV 174Vanity Combo Sink Base, 31 1/8” High VSDB__ 157Vanity Combo Sink Base, 34 1/2” High VSDB__H 162Vanity Drawer Base, 31 1/8” High VDB__ 154Vanity Drawer Base, 34 1/2” High VDB__H 159Vanity Linen Cabinet VLC__ 164Vanity Sink Base, 31 1/8” High VSB__/VAN__ 155Vanity Sink Base, 34 1/2” High VSB__H/VAN__H 160Vanity Sink Front, 31 1/8” High VSF__ 158Vanity Wastebasket Cabinet, 31 1/8” High VWBT18 154Vanity Wastebasket Cabinet, 34 ½” High VWBT1834H 159Void Door Cabinet Option VDO__ 48

IND

EX

281INDEX: T–V


282 INDEX: WIN

DEX

W Wall Bookshelves BSPLY___ 134Wall Cabinet Construction — 30Wall Cabinet Decorator Matching Doors DMDW__ 174Wall Cabinets with Spice Rack W__SR 61Wall Cabinets, Standard W__ 56Wall China Cabinet WCC__ 81Wall Column Filler WBC/WFC/WPC 179Wall Easy Reach Cabinet WER24__ 79Wall End Angle Cabinet WEA12__ 69Wall End Panel WEP__ 171Wall Filler Pull Out WFP__ 82Warranty Information — 4Wastebasket Lid WBL__ 128Wastebasket Unit WBU15 128White Overlay Filler __OF__ 177Wide Batten Molding WBM8 189Wine Rack WR36 87Wine Rack Cabinet WRC__ 81Wine Storage Cabinet WSC__ 81Wood Base End Panel WBEP 172Wood Overlay Filler __OF__ 177Wood Species & Materials — 29Wood Tall End Panel WTEP__ 172Wood Tiered Cutlery Divider Kit WTCDK__ 124

SKU Spec

www.woodmark-homedepot.com

©2010 American Woodmark Corporation

Printed in U.S.A. 0610 12M AWH96768

American Woodmark has received certification by the Kitchen Cabinet Manufacturers Association (KCMA) Environmental

Stewardship Program. The certification was awarded based on compliance across a broad range of activity including air

quality, product resource management, process resource management, environmental stewardship and community relations.

Documents

08-2010SpecGuide