07 Tilt Tables

8/13/2019 07 Tilt Tables

http://slidepdf.com/reader/full/07-tilt-tables 1/12

Made in Italy

Tilt Tables224 Introduction

225 Accessories and Upholstery

226 Tilt Tables for Static Exercises in Supine Position

229 Tilt Tables for Static Exercises and Physical Therapy

230 Tilt Table for Static Exsercise in Prone Position

232 Bobath Table for Static Exercises and Physical Therapy

234 Summary table7

C H I N E S P O R T G E N E

R A L C A T A L O G U E

- E D I T I O N

2 0 1 3

7


http://slidepdf.com/reader/full/07-tilt-tables 2/12 www.chinesport.com224

Within a motor, strength and balance re-education

programme, these tilt tables help to gradually

reach an erect posture from a static prone or supine

position when patients are unable to load their own

body weight on their lower limbs.

The tilt adjustment can be either servo-assisted by

gas springs, or electrical through wall power

supply or battery-operated. Some models also

provide for the table to be height-adjusted, should it

need to be used for physical therapy sessions.

Available motors for lift & tilt allow for different safe

working loads, for example up to 140 kg or 180 kg.

Each model shown is accompanied by a number

of icon symbols to help identify their features as

described.

Introduction

THERAPEUTIC INDICATIONS“Serious motor disabilities that require reaching or maintaining a standing,prone or supine position, for a certain period of time during the day”

(Proposal for Reclassification - Nomenclature for Assistive Devices) Research carried out by the Institute for

Treatment and Research “ S. Maria Nascente” of the “Don Carlo Gnocchi Onlus” Foundation – Milan 2004



Made in Italy

AC0002INTRA-EXTRA SANDALSOnce fitted to the footplates,they restrain and stabilise thefeet. Can be adjusted into intra-extra rotationand anteroposterior rotation. (2 pieces)

AC0003TRUNK SUPPORTSSide supports made from soft material,adjustable in height, width and depth.(2 pieces)

Upholstery has a high degree of finish and is made of Class 1IM fire-proof synthetic leather, extremely durable and disinfectant-resistant.It has also been treated with antibacterial, anti-mite SANITIZED, which provides long-lasting hygiene.

Upon placing the order, please remember to specify the code for the chosen upholstery. The colours in the picture may not be exactly the same as the original colours.

Some accessories are the same for all models, while othersare for specific applications. However, they can still be ordered along withthe table or at a later time.

AC0006STRAP CUSHIONPadded cushion offering greater and morecomfortable support to the patient. To be usedin combination with strap code AC0005.(single piece)

AC0309 WORK TABLE - PRONE STATIC EXERCISESThis work table can only be usedwith PRONO tilt tables, ref.models LT1B14 and LT1E14. It features a removable element so it canadapt to the user’s various needs in a prone orsupine position. Can be adjusted in height,depth and tilt. Dimensions: 700 x 560 mm

AC0312STRAP GUIDEHelps to safely fit thelower limbs restraining straps.If required, a separate fitting device can be used.Only for modelsLT1E14, LT1B14, LB492F2.

AC0004FOREARM SUPPORTSHeight-adjustable lateral grips.(2 pieces).

01132SPARE BATTERY

Allows for uninterrupted use while the mainbattery (provided) is being charged.

AC0308BOBATH WORK TABLEThis work table can only be usedwith BOBATH tilt table, ref. model LB492F2.The table is contoured to provide comfortablesupport to forearms.Can be adjusted in height, depth andtilt. Dimensions: 700 x 560 mm

AC0020W BREATHING HOLE PLUGChinesport tilt tables are suppliedwithout a breathing hole plug. This canbe ordered as accessory in the same colouras the table.

AC0310HEAD END FOR USE IN STATIC SUPINE POSITIONThis part can be used as an alternativewhen the tilt table is in supine position. Theaccessory is only suitable for models LT1B14 andLT1E14. It is provided with guides to allow forrestraining straps to be fitted

AC0005. Dimensions: 680 x 600 mm.

AC0005STRAPProvides better restraint for the patient;can be fitted at the desired height by meansof special guides. (single piece)

AC0081 WORK TABLE - SUPINE STATIC EXERCISESThis work table can be used with one-, three- orfour-section tables when the patient is in a staticsupine position. The table is contoured soforearms can be easily rested on it.Can be adjusted in height, depth and tilt.Dimensions: 700 x 560 mm

AC0311LEG SEPARATORHelps keep lower limbs separated when thepatient is in a static position.It can be fitted whenever required and is height-adjustable. Only for modelsLT1E14, LT1B14, LB492F2.

ACCESSORIES

COLOUR OPTIONS - UPHOLSTERY

A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P

Accessories and Upholstery

Note: A summary table at the end of this section provides a detailed illustrationof how any potential accessories can be combined with each model.

7



+85°

LT3G33.W TILT TABLE GSingle-section tilt table for static exercises in supine position for up to120 kg. Up to 85° tilt via two-gas spring servo-assisted system. Lifting takes place in a continuous movement and with minimal effortfor the carer, while the user is on board. It is fitted with tilt angle

indicator; height from ground is 85 cm. Two straps are providedfor patient restraint.It can be moved with a mobile lift or medical equipment trolley, clearanceunder the table base is 17 cm.Transport is made easier by the wide diameter, braked casters,one of them being directional. The footplate is ready tofit the sandals AC0002

. il .: . il.

. :. :

:

...

:

:

.

60

200

Protractor indicatingtable tilt angle degrees

Casters diameter 125 mm

CM 17

CM 85

Clearance under the table allowsaccess by patient lifts ormedical equipment trolleys

Tilt Tables for Static Exercises in Supine Position

CM 74


Upon placing the order, please remember to specify the codefor the chosen upholstery along with the table code.

A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P

ACCESSORIES AC0002 INTRA-EXTRA SANDALS

AC0003 TRUNK SUPPORTS

AC0004 FOREARM SUPPORTS

AC0005 RESTRAINING STRAP

AC0006 STRAP CUSHION

AC0020 BREATHING HOLE PLUG

AC0081 WORK TABLE - SUPINE STATIC EXERCISES

120 Kg



Made in Italy

CM 17

CM 56

. .: . .

. :. :

:

I I...

:

:

.

60

127

59200


Casters diameter 125 mm Independent, tilting footplates

Note: PLUS models are provided with an additional safety system sothe table can be lowered manually in the event of power interruption.

LT1E21.W TILT TABLE E PLUSVersion with wall power supply for up to 180 kg.

LT1E11.W TILT TABLE EThree-section tilt table for static exercises in supine position for up to140 kg. Up to 85° tilt with wall power supply, 24V low voltage,and operated by hand control. It is fitted with tilt angle indicator; heightfrom ground is 56 cm. Two patient restraining straps are provided.

A central guide between the two lower limbs support sectionsallows for the restraining strap to be better fitted and secured.Transport is made easier by the wide diameter, braked casters,one of them being directional. Footplates can be independently adjustedby +/- 20°.+85°

CM 76

+/-20°



A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P






01132 SPARE BATTERY



LT1B11.W TILT TABLE BVersion with 24 V rechargeable battery supply.Battery charger included.

LT1B21.W TILT TABLE B PLUSVersion with 24 V rechargeable battery supply for up to 180 kg.

Battery charger included.

Hand control, electrical adjustments

180 Kg

180 Kg

140 Kg

140 Kg

7



CM 17

CM 56


A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P

LT1E12.W TILT TABLE ETFour-section tilt table for static exercises in supine position for up to 140 kg.Up to 85° tilt with wall power supply, 24V low voltage, and operated by handcontrol. It is fitted with tilt angle indicator; height from ground is 56 cm. Headend section can be adjusted up/down by gas spring. Two patient restraining straps

are included. A central guide between the two lower limbs support sectionsallows for the restraining strap to be better fitted and secured.Transport is made easier by the wide diameter, braked casters, one of them beingdirectional. Footplates can be independently adjusted by +/- 20°.

LT1B12.W TILT TABLE BTVersion with 24 V rechargeable battery supply.Battery charger included.

l l. .: . .

. :. :

:

::

I I I...

:

: 1

.

-20°

50

82

59205

60

+80°

+85°

CM 76

Note: PLUS models are provided with an additional safety system sothe table can be lowered manually in the event of power interruption



+/-20°


LT1E22.W TILT TABLE ET PLUSVersion with wall power supply for up to 180 kg.

LT1B22.W TILT TABLE BT PLUSVersion with 24 V rechargeable battery supply for up to 180 kg.Battery charger included.









01132 SPARE BATTERY


180 Kg

180 Kg

140 Kg

140 Kg



Made in Italy

CM 17

CM 56 - 106


A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P

,1

.

l l. .: . .

. :. :

:

::

I I I I..

:

.

:

:

: 1

.

-20°

50

82

59205

60

+80°

LT2E12.W TILT TABLE 2E TFour-section tilt table for supine position static exercises, examination andphysical therapy for up to 140 kg. Can be adjusted in height and tiltup to 85°, with wall power supply, 24V low voltage,and operated by hand control. It is fitted with tilt angle

indicator; height from ground is 56 cm. Head end section can beadjusted up/down by gas spring. Two patient restraining straps areincluded. A central guide between the two lower limbs support sectionsallows for the restraining strap to be better fitted and secured.Transport is made easier by the wide diameter, braked casters,one of them being directional. Footplates can be independently adjustedby +/- 20°.

+85°

CM 76

Note: A specific device is fittedto allow for an alternative way of adjustingthe height or tilt.



+/-20°

Tilt Tables for Static Exercises and Physical Therapy

LT2B12.W TILT TABLE 2B TVersion with 24 V rechargeable battery supply.Battery charger included.









01132 SPARE BATTERY


140 Kg140 Kg

140 Kg 140 Kg

7



LT1E14.W TILT TABLE E PROFour-section tilt table for static exercises in prone position for up to 140 kg.Up to 85° tilt with wall power supply, 24V low voltage, and operated byhand control. It is fitted with tilt angle indicator; minimum height fromground is 56 cm. The trunk support section is height-adjustable.

Two patient restraining straps are included. A central guide between the two lower limbs support sectionsallows for the restraining strap to be better fitted and securedby means of accessory AC0312. It is also possible to fit the leg separatoraccessory AC0311. When fitted with accessory AC0310, the table can alsobe used for static exercises in supine position.Transport is made easier by the wide diameter, braked casters,one of them being directional. The footplate is height-adjustable.

Adjustable footplate

+85°

CM 76

Adjustable tr unk suppor t


A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P



CM 17

CM 60

Tilt Table for Static Exercise in Prone Position

LT1B14.W TILT TABLE B PROVersion with 24 V rechargeable battery supply.Battery charger included.

Note: When fitted with accessory AC0310, the table can alsobe used for static exercises in supine position.


ACCESSORIES

AC0002 INTRA-EXTRA SANDALS AC0003 TRUNK SUPPORTS




01132 SPARE BATTERY

AC0309 WORK TABLE - PRONE STATIC EXERCISES

AC0310 HEAD END FOR USE IN SUPINE STATIC EXERCISES

AC0311 LEG SEPARATOR

AC0312 STRAP GUIDE

140 Kg

140 Kg



Made in Italy

“Separator” can be easily slottedinto the central arrangement

Fitting the “head end section for use insupine static exercises” - Accessory AC0310

Lower limbs restraint with “strapguide” – Accessory AC0312

Height-adjustable “Leg separator”– Accessory AC0311

Tilt Table for Static Exercise in Prone Position

7



LB492F2X TILT TABLE BOBATH 2ETTwo-section Bobath table for treatment and static exercises in supineposition. Height-adjustable up to 250 kg (safe load), or tilt adjustable from0° to 85° up to 190 kg, with wall power supply, 24V low voltage, andoperated by hand control. It is fitted with tilt angle indicator; minimum

height from ground is 55 cm. Two patient restraining straps are included.Head end section can be adjusted up/down by gas spring;it is also provided with breathing hole plug. A central arrangementbetween the lower limbs support sections also allows for the restraining strapto be better fitted and secured by means of accessory AC0312. Leg separatoraccessory AC0311 can also be fitted. Table padding with side panel.Casters have a pedal-activated braking system.Footplates can be independently adjusted by +/- 20° and removedwhen required during physical therapy sessions.

+85°


A 8 B4 D Z F 9 H S T 6 1R 2 3 L 7 M P

Bobath Table for Static Exercises and Physical Therapy

CM 17

CM 55 - 105


Hand control, electrical adjustmentsIndependent, tilting footplates


+/-20°

Note: This model was designed to help both carer and

patient during gym rehabilitation programmes, to avoid the timeand possible inconvenience of a transfer from a specific table to another.

ACCESSORIES

AC0002 INTRA-EXTRA SANDALS AC0003 TRUNK SUPPORTS




AC0308 WORK TABLE - BOBATH

AC0311 LEG SEPARATOR

AC0312 STRAP GUIDE

OTHER ACCESSORIES AC0024 FACE CUSHION

AC0033 VERT. COUCH ROLL HOLDER

AC0035 LARGE SHEET

1) Note: A specific safety device isfitted to allow for an alternative way of adjusting the height or tilt.

2) Note: A specific safety device isfitted to allow for the table to belowered manually in case of powerinterruption.

250 Kg190 Kg



Made in Italy

Fitting the footplate assembly for use with static exercises in supine position.

Leg separatoraccessory AC0311 (single piece)

Foot restraining sandalsaccessory AC0002 (2 pieces)

Work table for static exercises in supinepositionaccessory AC0308 (single piece)

Forearm supportsaccessory AC0004 (2 pieces)

Removable footplate assembly

Strap guideaccessory AC0312 (single piece)

Lateral trunk supportsaccessory AC0003 (2 pieces)

Bobath Table for Static Exercises and Physical Therapy

SOME ACCESSORY APPLICATION EXAMPLES

7


http://slidepdf.com/reader/full/07-tilt-tables 12/12hi234

TILT TABLESTECHNICAL DATA

LT1E11 LT1E21 LT1E12 LT1E22 LT1E14 LT1B11 LT1B21 LT1B12 LT1B22 LT1B14 LT2B12 LT2E12 LB492F2 LT3G33

Number of sections 3 3 4 4 4 3 3 4 4 4 4 4 6 1

Adjustable head end(by gas spring)

- - • • - - - • • - • • • -

Adjustment type (1) E E E E E B B B B B B E B M

Supine static exercises • • • • - • • • • - • • • •

Prone and supine static ex.

(with Acc. AC0310) - - - - • - - - - • - - - -

Max userheight in cm

200 200 200 200 190 200 200 200 200 190 200 200 200 200

Max working load in KgTilt adjustment

140 180 140 180 140 140 180 140 180 140 140 140 150 120

Max working load in KgHeight adjustment

- - - - - - - - - - 150 150 250 -

Table height in cm:fixed or adjustable

56 56 56 56 60 56 56 56 56 60 56-106 56-106 55-105 85

Braked casters • • • • • • • • • • • • • •

Class 1IM fire-proofupholstery (anti-bacterial,

anti-mite)• • • • • • • • • • • • • •

Table weight in kg 65 65 65 65 65 65 65 65 65 65 100 100 141 65

ACCESSORIES

AC0002Intra-extra sandals • • • • • • • • • • • • • •

AC0003Trunk supports • • • • • • • • • • • • • •

AC0004Forearm supports • • • • • • • • • • • • • •

AC0005Strap • • • • • • • • • • • • • •

AC0006Strap cushion • • • • • • • • • • • • • •

AC0020Breathing hole plug

- - • • - - - • • - • •stan-dard

-

01132IPX4Spare battery

- - - - - • • • • • • - - -

AC0081 Work table

for supine static ex.• • • • - • • • • - • • - •

AC0308 Work table

for Bobath table- - - - - - - - - - - - • -

AC0309 Work tab le

for prone & supine static ex.- - - - • - - - - • - - - -

AC0310Head end for use in

supine static ex.- - - - • - - - - • - - - -

AC0311Leg separator

- - - - • - - - - • - - • -

AC0312Strap guide - - - -

• - - - -

• - -

• -

Below is a list of any possible accessories for each model. These can be ordered along with the static exercise table or at a later time.

(1) E -wall power supply; B – electrical battery op.; M – manual. Power supply is 220 V 50-60 Hz / 24 V 70 VA battery, 110-220 V 50-60 Hz – 500 mA battery charger

Summary table

Documents

07 Tilt Tables