Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
193
05Driver LED e alimentatori LED
LED drivers and LED power supplies
Schede LED e moduli LEDLED boards and LED modules 01
Strip LED e profili in alluminioLED strips and aluminium profiles 02
Elettronica di controlloControl electronics 03
Sistema QUICK-LEDQUICK-LED system 04
Driver LED e alimentatori LEDLED drivers and LED power supplies 05
Sistemi di raffreddamentoCooling systems 06
PAD termiciThermal PADs 07
Ottiche, cover di protezione e collimatoriLenses, protection covers and collimators 08
Cavi e accessoriCables and accessories 09
Lampadine LEDLED bulbs 10
Informazioni tecnicheTechnical information 11
Legenda Legend
194
Tolleranzatolerance
Generali ±0,15mm; Ø fori ±0,1mmGeneral ±0.15mm; hole Ø ±0.1mm
Alimentatore/DriverPower supply unit/Driver
Per un buon funzionamento, assicurarsi che l’alimentatore o il driver utilizzato abbia le caratteristiche tecniche richieste dall'applicazione finale.
For proper operation, make sure that the power supply unit or LED driver has the technical characteristics required by the final application.
NoteNotes
Durante le fasi di lavorazione è necessario prestare la massima attenzione ed evitare di danneggiare l'alimentatore o il driver.Collegare l'alimentatore o il driver all'alimentazione principale solo al termine dell'installazione.
During assembly steps, be careful not to damage the power supply unit or driver.Connect the power supply unit or driver to the main voltage only after completing installation.
SimbologiaSymbols
Ingresso tensione costanteConstant voltage input
Uscita tensione costanteConstant voltage output
Uscita corrente costanteConstant current output
Tensione di ingresso VacInput voltage Vac
Tensione di ingresso VacInput voltage Vac
DimmerabileDimmable
Quantità minimaMinimum quantity
USB Type-A
Principali certificazioniMain certifications
Direttiva RCM per Australia e Nuova ZelandaAustralia and New Zealand RCM directive
Conformità allo standard DALIComply to DALI standard
Conformità ai requisiti di sicurezza Corea del SudCompliance with South Korean safety requirements
Trasformatore conforme alla normativa europea per l'utilizzo all'interno di mobili o armadi Transformer complying with European Regulations suitable for installation in furniture and cabinets
InfiammabileFlammable mark
La temperatura di superficie del trasformatore non supera 110°C in condizioni di sovraccarico o cortocircuitoThe surface temperature of the transformer will not exceed 110°C in case of overload or short circuit
Trasformatore indipendenteIndependent converter
Protezione Classe IIClass II protection
Trasformatore con isolamento di sicurezza, a prova di cortocircuitoSafety insulation transformer, short-circuit proof
Trasformatori in bassissima tensioneVery-low-voltage transformers
Conformità CECE declaration of conformity
Marchio TUVTUV mark
Compatibilità elettromagneticaElectromagnetic compatibility
Marchio UL per Stati Uniti e CanadaUL mark for Canada and the US
Approvato dalla Commissione Federale delle ComunicazioniFederal Communications Commission approved
Certificazione obbligatoria CinaCompulsory certification for China
Rapporto di conformità Cina (prove di sicurezza elettrica) riconosciuto dalla IECCompliance report for China (electrical safety tests) recognized by the IEC
Conformità ai requisiti di sicurezza giapponesiCompliance with Japanese safety requirements
Conformità C-Tick per AustraliaAustralia C-Tick compliant
Standard di certificazione per Australia e Nuova ZelandaCertification standards for Australia and New Zealand
Indice capitoloChapter contents
Driver LED / LED drivers pag.
Driver LED DC-DCDC-DC LED Drivers 195 › 196
Corrente costante 350/500/700mA350/500/700mA constant current 197 › 208
Spina integrata 350/500/700mA350/500/700mA wall mount 209 › 210
Multifunzione / Multifunction 211
Alimentatori LED / LED power supplies pag.
Tensione costante 12V-24V12V-24V constant voltage 212 › 225
Spina integrata 5V-12V-24V5V-12V-24V wall mount 226 › 229
Waterproof 12V / 12V waterproof 229 › 230
Capitolo • Chapter 05Driver LED DC-DCDC-DC LED drivers
195Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRC...
DRD...
DC-DC
DC-DC
CodiceCode
Tensione di ingresso VdcInput voltage Vdc
Uscita CCOutput CC
Max V Loadif Vin = 12V
Max W Loadif Vin = 12V
Max V Loadif Vin = 24V
Max W Loadif Vin = 24V
DRC0350008.W7001 12-24V 350mA 10,8V 3,7W 21,6V 7,6W
DRC0500012.W7001 12-24V 500mA 10,8V 5,4W 21,6V 10,8W
DRC0700016.W7001 12-24V 700mA 10,8V 7,5W 21,6V 15W
CodiceCode
Tensione di ingresso VdcInput voltage Vdc
Uscita CCOutput CC
Max V Loadif Vin = 12V
Max W Loadif Vin = 12V
Max V Loadif Vin = 24V
Max W Loadif Vin = 24V
DRD0350008.W8001 12-24V 350mA 10,8V 3,7W 21,6V 7,6W
DRD0500012.W8001 12-24V 500mA 10,8V 5,4W 21,6V 10,8W
DRD0700016.W8001 12-24V 700mA 10,8V 7,5W 21,6V 15W
Descrizione / Description
LED Driver DC/DC (Step-Down), ingresso 12-24V, uscita in corrente costante.Cavi Teflon-FEP® AWG22 cm 20, altre lunghezze a richiesta.La tensione (Vf) del carico applicato deve essere max 10,8V se la tensione in ingresso è 12V e 21,6V se la tensione in ingresso è 24V.
DC/DC (Step-Down) LED driver, input 12-24V, output constant current.Teflon-FEP® AWG22 cables (cm 20), others lengths on request.The voltage (Vf) of applied load must be max 10.8V if input voltage is 12V or 21.6V if input voltage is 24V.
Temperatura / Temperature
ta: -20°C~+40°C
Schema di collegamento / Wiring layoutCap. 11 - pag. 291
Descrizione / Description
LED Driver DC/DC (Step-Down), ingresso 12-24V, uscita in corrente costante, dimmerabile PWM. Cavi Teflon-FEP® AWG22 cm 20, altre lunghezze a richiesta.La tensione (Vf) del carico applicato deve essere max 10,8V se la tensione in ingresso è 12V e 21,6V se la tensione in ingresso è 24V.Se il cavo di dimmerazione non è utilizzato collegarlo al polo negativo (-).
DC/DC (Step-Down) LED driver, input 12-24V, output constant current, PWM dimming. Teflon-FEP® AWG22 cables (cm 20), others lengths on request.The voltage (Vf) of applied load must be max 10.8V if input voltage is 12V or 21.6V if input voltage is 24V. If dimming cable is not used connect it to GND (-).
Temperatura / Temperature
ta: -20°C~+40°C
Schema di collegamento / Wiring layoutCap. 11 - pag. 291
1
1
196 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED DC-DC
DC-DC LED driversDRF... DC-DC / RGB
Descrizione / Description
LED Driver DC/DC (Step-Down), ingresso 12-24V, tre uscite in corrente costante dimmerabili PWM.Cavo PVC-PVC sezione 0,25 mm, lunghezza cm 20, uscita con connettore MODU II.Altre lunghezze da definire in fase d'ordine.
DC/DC (Step-Down) LED driver, input 12-24V, 3 constant current outputs, PWM dimming.PVC-PVC cables: section 0.25 mm, length cm 20, exit cable with MODU II connector.Cables of different lengths available upon ordering.
Temperatura / Temperature
ta: -20°C~+40°C
Schema di collegamento / Wiring layoutCap. 11 - pag. 289
CodiceCode
Tensione di ingresso VdcInput voltage Vdc
Valori riferiti alla singola uscita / Values referred to a single output
Uscita CCOutput CC
Max V Loadif Vin = 12V
Max W Loadif Vin = 12V
Max V Loadif Vin = 24V
Max W Loadif Vin = 24V
DRF0200... 12-24V 200mA 9,6V 1,9W 21,6V 4,3W
DRF0350... 12-24V 350mA 9,6V 3,3W 21,6V 7,5W
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
197Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0350004.050
DRN0350003.050
350mA
350mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350003.050 200~240V (50Hz) 350mA 3,5~18V 1,22~6,3W
Descrizione / Description
LED driver corrente costante 350mA - 3,7W.Case resinato.Cavi PVC-AWG22, lunghezza cm 20.
Constant current LED driver: 350mA - 3.7W.Resinate case.Cm 20, PVC-AWG22 cables.
Temperatura / Temperature
tc: +75°C / ta: +50°C
Descrizione / Description
LED driver corrente costante 350mA - 6,3W.Morsetti a vite.
Constant current LED driver: 350mA - 6.3W.Screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 50°C
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350003.050 100~240V (50/60Hz) 350mA 0,5~10,5V 0~3,7W
1
198 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0350008.240
DRN0350006.240
350mA
350mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350008.240 200~240V (50/60Hz) 350mA 12~24V 4,2~8,4W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350006.240 200~240V (50Hz) 350mA 0~17,5V 0~6W
Descrizione / Description
LED driver corrente costante 350mA - 6W.Classe II, morsetti a vite.Alimentazione secondaria con connessione rapida DC-plug.
Constant current LED driver: 350mA - 6W.Class II, screw terminals.Secondary power supply with DC-plug fast connection.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 350mA - 8W.Classe II, morsetti a vite.
Constant current LED driver: 350mA - 8W.Class II, screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
1
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
199Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0350012.240
DRN0350015.240
350mA
350mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350015.240 200~240V (50/60Hz) 350mA 30~43V 10,5~15W
Descrizione / Description
LED driver corrente costante 350mA - 12W.Classe II, morsetti a vite.Alimentazione secondaria con connessione rapida DC-plug.
Constant current LED driver: 350mA, 12W.Class II, screw terminals.Secondary power supply with DC-plug fast connection.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 350mA - 15W.Classe II, morsetti a vite.
Constant current LED driver: 350mA - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350012.240 200~240V (50/60Hz) 350mA 0~34V 0~12W
1
200 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0500006.171
DRN0350020.240
500mA
350mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(CC)
Load Range(W)
DRN0500006.171 200~240V (50/60Hz) 6~12V 500mA 3~6W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0350020.240 200~240V (20/60Hz) 350mA 30~56V 10,5~19,6W
Descrizione / Description
LED driver corrente costante 350mA - 20W.Classe II, morsetti a vite.
Constant current LED driver: 350mA - 20W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 500mA - 6W.Morsetti a vite.
Constant current LED driver: 500mA - 6W.Screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 50°C
1
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
201Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0500008.240
DRN0500012.240
500mA
500mA
Descrizione / Description
LED driver corrente costante 500mA - 8W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 8W.Class II, screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 500mA - 12W.Classe II, morsetti a vite.Alimentazione secondaria con connessione rapida DC-plug.
Constant current LED driver: 500mA - 12W.Class II, screw terminals.Secondary power supply with DC-plug fast connection.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500008.240 200~240V (50/60Hz) 500mA 8~16V 4~8W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500012.240 200~240V (50/60Hz) 500mA 0~24V 0~12W
1
1
202 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0500015.242
DRN0500015.240
500mA
500mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500015.240 200~240V (50Hz) 500mA 20~30V 10~15W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500015.242 200~240V (50/60Hz) 500mA 15~30V 7,5~15W
Descrizione / Description
LED driver corrente costante 500mA - 15W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 500mA - 15W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
1
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
203Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0500020.240
DRN0500030.240
500mA
500mA
Descrizione / Description
LED driver corrente costante 500mA - 20W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 20W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 500mA - 30W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500020.240 200~240V (50/60Hz) 500mA 22~40V 11~20W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500030.240 200~240V (50/60Hz) 500mA 30~60V 15~30W
1
1
204 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0700003.050
DRN0500050.240
700mA
500mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0500050.240 200~240V (50/60Hz) 500mA 50~100V 25~50W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700003.050 100~240V (50/60Hz) 700mA 0,5~4V 0,3~2,8W
Descrizione / Description
LED driver corrente costante 500mA - 50W.Classe II, morsetti a vite.
Constant current LED driver: 500mA - 50W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 700mA - 3WCase resinato.Cavi PVC-AWG22, lunghezza cm 20.
Constant current LED driver: 700mA - 3W.Resinate case.Cm 20, PVC-AWG22 cables.
Temperatura / Temperature
tc: +75°C / ta: +50°C
1
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
205Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0700006.171
DRN0700008.240
700mA
700mA
Descrizione / Description
LED driver corrente costante 700mA - 6W.Morsetti a vite.
Constant current LED driver: 700mA - 6W.Screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 50°C
Descrizione / Description
LED driver corrente costante 700mA - 8W.Classe II, morsetti a vite.
Constant current LED driver: 700mA - 8W.Class II, screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700006.171 200~240V (50/60Hz) 700mA 4~9V 2,8~6,3W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700008.240 200~240V (50/60Hz) 700mA 6~12V 4,2~8,4W
1
1
206 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0700015.240
DRN0700012.240
700mA
700mA
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700012.240 200~240V (50/60Hz) 700mA 0~17V 0~12W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700015.240 200~240V (50/60Hz) 700mA 15~21V 10,5~15W
Descrizione / Description
LED driver corrente costante 700mA - 12W.Classe II, morsetti a vite.Alimentazione secondaria con connessione rapida DC-plug.
Constant current LED driver: 700mA - 12W.Class II, screw terminals.Secondary power supply with DC-plug fast connection.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 700mA - 15W.Classe II, morsetti a vite.
Constant current LED driver: 700mA - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
1
1
Capitolo • Chapter 05Driver LED 350/500/700mA350/500/700mA LED drivers
207Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRN0700020.240
DRN0700030.240
700mA
700mA
Descrizione / Description
LED driver corrente costante 700mA - 20W.Classe II, morsetti a vite.
Constant current LED driver: 700mA - 20W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 700mA - 30W.Classe II, morsetti a vite.
Constant current LED driver: 700mA - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700020.240 200~240V (50/60Hz) 700mA 14~29V 9,8~20W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700030.240 200~240V (50/60Hz) 700mA 21,4~42,8V 15~30W
1
1
208 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED 350/500/700mA
350/500/700mA LED drivers
DRN0700050.240
DRD0700030.240
700mA
700mA
Descrizione / Description
LED driver corrente costante 700mA - 15~30W.Classe II, resinato IP67.Dimmerabile 1-10V, 0-10V e PWM.Cavi IN/OUT cm 10.
Constant current LED driver: 700mA - 15~30W.Class II, IP67 insulation.1-10V, 0-10V and PWM dimming.IN/OUT cables (cm 10).
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver corrente costante 700mA - 50W.Classe II, morsetti a vite.
Constant current LED driver: 700mA - 50W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRD0700030.240 100~277V (50/60Hz) 700mA 21~42,5V 15~30W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
DRN0700050.240 200~240V (50/60Hz) 700mA 36~72V 25~50W
1
1
Capitolo • Chapter 05Driver LED spina integrata 350/500/700mA350/500/700mA wall mount LED drivers
209Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRS0350009350mA
DRS0350015.240350mA
Descrizione / Description
LED driver a spina integrata, corrente costante 350mA - 9W.Disponibile nella versione con case Nero e TrasparenteCavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount constant current LED driver: 350mA - 9W.Available with Black or Transparent case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
LED driver a spina integrata, corrente costante 350mA - 15W.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount constant current LED driver: 350mA - 15W.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 80°C / ta: + 40°C
1
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
ColoreColour
DRS0350009.170220~240V (50/60Hz) 350mA 9~30V 3~9W
Trasparente / Transparent
DRS0350009.171 Nero / Black
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
ColoreColour
DRS0350015.240 200~240V (50/60Hz) 350mA 17~43V 6~15W Nero / Black
210 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Driver LED spina integrata 350/500/700mA
350/500/700mA wall mount LED drivers
DRS0700009
DRS0500012.240
700mA
500mA
Descrizione / Description
LED driver a spina integrata, corrente costante 500mA - 12W.Disponibile nella versione con case Nero e Trasparente.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount constant current LED driver: 500mA - 12W.Available with Black or Transparent case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 75°C / ta: + 40°C
Descrizione / Description
LED driver a spina integrata, corrente costante 700mA - 9W.Disponibile nella versione con case Nero e Trasparente.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount constant current LED driver: 700mA - 9W.Available with Black or Transparent case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
ColoreColour
DRS0700009.170220~240V (50/60Hz) 700mA 3~15V 3~9W
Trasparente / Transparent
DRS0700009.171 Nero / Black
1
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(CC)
Uscita / Output(Vdc)
Load Range(W)
ColoreColour
DRS0500012.240 200~240V (50/60Hz) 500mA 12~24V 6~12W Nero / Black
Capitolo • Chapter 05Driver LED multifunzioneMultifunction LED drivers
211Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
DRM105004040WMultifunction
DRM1400060
CodiceCode
Tensione di ingressoInput voltage
(Vac)
UscitaOutput
(CC)
UscitaOutput(Vdc)
LoadRange
(W)
UscitaOutput
(CC)
UscitaOutput(Vdc)
LoadRange
(W)
DRM1050040.220 / DRM1050040.221180~295V(47/63Hz)
350mA 2~100V 35W 700mA 2~57V 40W
500mA 2~80V 40W 900mA 2~45V 40W
600mA 2~67V 40W 1050mA 2~40V 42W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
UscitaOutput
(CC)
UscitaOutput(Vdc)
LoadRange
(W)
UscitaOutput
(CC)
UscitaOutput(Vdc)
LoadRange
(W)
DRM1400060.220 / DRM1400060.221180~295V(47/63Hz)
500mA 2~90V 45W 900mA 2~67V 60W
600mA 2~90V 54W 1050mA 2~57V 60W
700mA 2~86V 60W 1400mA 2~42V 58,8W
Descrizione / Description
LED driver corrente costante, con uscita multipla 350~1050mA - 40W, selezionabile mediante dip-switch. Classe II, morsetti a vite.DRM1050040.220: Dimmerabile DALI e funzione “push dimming”.DRM1050040.221: Dimmerabile 0~10V e PWM.Con funzione master/slave (max 10 unità).
Constant current LED driver, multiple output: 350~1050mA - 40W, selectable by DIP-switch. Class II, screw terminals.DRM1050040.220: Dimmable DALI and push-dimming.DRM1050040.221: Dimming 0~10V and PWM.With master/slave function (max 10 units).
Temperatura / Temperature
tc: + 90°C / ta: + 60°C
Descrizione / Description
LED driver corrente costante, con uscita multipla 500~1400mA - 60W, selezionabile mediante dip-switch. Classe II, morsetti a vite.DRM1400060.220: Dimmerabile DALI e funzione “push dimming”.DRM1400060.221: Dimmerabile 0~10V e PWM.Con funzione master/slave (max 10 unità).
Constant current LED driver, multiple output: 500~1400mA - 60W, selectable by DIP-switch. Class II, screw terminals.DRM1400060.220: Dimmable DALI and push-dimming.DRM1400060.221: Dimming 0~10V and PWM.With master/slave function (max 10 units).
Temperatura / Temperature
tc: + 90°C / ta: + 60°C
60WMultifunction
1
1
212 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power suppliesALN012005.050 12V
ALN012006.240 12V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012005.050 200~240V 12V 420mA 5W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012006.240 200~240V (50Hz) 12V 500mA 6W
Descrizione / Description
Alimentatore LED 12V - 420mA - 5W.Morsetti a vite.
LED Power supply: 12V - 420mA - 5W.Screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 50°C
Descrizione / Description
Alimentatore LED 12V - 500mA - 6W.Classe II, morsetti a vite.Alimentazione secondaria con connessione rapida DC-plug.
LED power supply: 12V - 500mA - 6W.Class II, screw terminals.Secondary power supply with DC-plug fast connection.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
1
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
213Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN012015.241
ALN012012.241
12V
12V
Descrizione / Description
Alimentatore LED 12V - 1A - 12W.Classe II, morsetti a vite.
LED power supply: 12V - 1A - 12W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 12V - 1,25A - 15W.Classe II, morsetti a vite.
LED power supply: 12V - 1.25A - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012012.241 200~240V (50/60Hz) 12V 1A 12W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012015.241 200~240V (50/60Hz) 12V 1,25A 15W
1
214 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power supplies
ALN012020.242
ALN012015.249
12V
12V
Descrizione / Description
Alimentatore LED 12V - 1,25A - 15W.Classe II, IP44, cavi IN/OUT da cm 15.
LED power supply: 12V - 1.25A - 15W.Class II, IP44, IN/OUT cables (cm 15).
Temperatura / Temperature
tc: + 80°C / ta: + 50°C
Descrizione / Description
Alimentatore LED 12V - 1,67A - 20W.Classe II, morsetti a vite.
LED power supply: 12V - 1.67A - 20W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012020.242 200~240V (50/60Hz) 12V 1,67A 20W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012015.249 200~240V (50/60Hz) 12V 1,25A 15W
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
215Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN012030.240
ALN012030.245
12V
12V
Descrizione / Description
Alimentatore LED 12V - 2,5A - 30W.Classe II, morsetti a vite.
LED power supply: 12V - 2.5A - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 12V - 2,5A - 30W.Classe II, morsetti a vite.
LED power supply: 12V - 2.5A - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012030.240 200~240V (50/60Hz) 12V 2,5A 30W
1
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012030.245 120V (60Hz) 12V 2,5A 30W
216 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power supplies
ALN012050.246
ALN012050.240
12V
12V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012050.240 200~240V (50/60Hz) 12V 4,2A 50W
Descrizione / Description
Alimentatore LED 12V - 4,2A - 50W.Classe II, morsetti a vite.
LED power supply: 12V - 4.2A - 50W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 12V - 4,17A - 50W.Classe II, morsetti a vite.
LED power supply: 12V - 4.17A - 50W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 50°C
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012050.246 100~240V (50/60Hz) 12V 4,17A 50W
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
217Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN012075.242
ALN012075.246
12V
12V
Descrizione / Description
Alimentatore LED 12V - 5,83A - 70W.Classe II, morsetti a vite.
LED power supply: 12V - 5.83A - 70W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 12V - 6,25A - 75W.Classe II, morsetti a vite.
LED power supply: 12V - 6.25A - 75W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012075.242 200~240V (50/60Hz) 12V 5,83A 70W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012075.246 100~240V (50/60Hz) 12V 6,25A 75W
1
218 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power suppliesALN012100.243 12V
CodiceCode
Tensione di ingresso / Input voltage(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
Dimensioni / DimensionsL x P x H
ALG012015.220
88~264V (47/63Hz) 12V
1,3A 15W 62,5 x 51 x 28ALG012025.220 2,1A 25W 78 x 51 x 28ALG012035.220 3A 35W 99 x 82 x 36ALG012050.220 4,2A 50W 99 x 97 x 36ALG012075.220 6A 75W 129 x 97 x 38ALG012100.220 8,5A 100W 159 x 97 x 38ALG012150.220 12,5A 150W 199 x 98 x 38ALG012200.220 16,7A 200W 199 x 99 x 50
1
ALG012 12V
CodiceCode
Tensione di ingresso / Input voltage(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN012100.243 200~240V (50/60Hz) 12V 8,33A 100W
Descrizione / Description
Alimentatore LED 12V - 8,33A - 100W.Classe II.Morsetti a vite.
LED power supply: 12V - 8.33A - 100W.Class II.Screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 12V.Disponibile in varie potenze, da 15W a 200W.Case in metallo, morsetti a vite.
LED power supply: 12V.Available in different powers, from 15W to 200W.Metal case, screw terminals.
Temperatura / Temperature
tc: + 70°C / ta: + 25°C
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
219Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN024006.05024V
Descrizione / Description
Alimentatore LED 24V - 250mA - 6W.Morsetti a vite.
LED power supply: 24V - 250mA - 6W.Screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 50°C
ALN024008.24024V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024006.050 200~240V (50Hz) 24V 250mA 6W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024008.240 200~240V (50/60Hz) 24V 330mA 8W
Descrizione / Description
Alimentatore LED 24V - 330mA - 8W.Classe II, morsetti a vite
LED power supply: 24V - 330mA - 8W.Class II, Screw terminals.
Temperatura / Temperature
tc: + 75°C / ta: + 45°C
1
220 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power suppliesALN024015.240
ALN024020.242
24V
24V
Descrizione / Description
Alimentatore LED 24V - 625mA - 15W.Classe II, morsetti a vite.
LED power supply: 24V - 625mA - 15W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 24V - 840mA - 20W.Classe II, morsetti a vite.
LED power supply: 24V - 840mA - 20W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024015.240 200~240V (50/60Hz) 24V 625mA 15W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024020.242 200~240V (50/60Hz) 24V 840mA 20W
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
221Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN024030.240
ALN024030.242
24V
24V
Descrizione / Description
Alimentatore LED 24V - 1,25A - 30W.Classe II, morsetti a vite.
LED power supply: 24V - 1.25A - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 24V - 1,25A - 30W.Classe II, morsetti a vite.
LED power supply: 24V - 1.25A - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 50°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024030.240 200~240V (50/60Hz) 24V 1,25A 30W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024030.242 200~240V (50/60Hz) 24V 1,25A 30W
1
222 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power supplies
ALN024050.240
ALN024030.245
24V
24V
Descrizione / Description
Alimentatore LED 24V - 1,25A - 30W.Classe II, morsetti a vite.
LED power supply: 24V - 1.25A - 30W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 24V - 2,08A - 50W.Classe II, morsetti a vite.
LED power supply: 24V - 2.08A - 50W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024050.240 200~240V (50/60Hz) 24V 2,08A 50W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024030.245 120V (60Hz) 24V 1,25A 30W
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
223Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN024060.242
ALN024075.243
24V
24V
Descrizione / Description
Alimentatore LED 24V - 2,5A - 60W.Classe II, morsetti a vite.
LED power supply: 24V - 2.5A - 60W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
Descrizione / Description
Alimentatore LED 24V - 3,13A - 75W.Classe II, morsetti a vite.
LED power supply: 24V - 3.13A - 75W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024060.242 200~240V (50/60Hz) 24V 2,5A 60W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024075.243 200~240V (50/60Hz) 24V 3,13A 75W
224 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED 12V-24V
12V-24V LED power supplies
ALN024100.242
ALN024100.230
24V
24V
Descrizione / Description
Alimentatore LED 24V - 4,1A - 100W.Case in metallo, Classe II, morsetti a vite.Dimmerabile 0-10V/PWM/Resistivo.Range di dimmerazione: 1~100%.
LED power supply: 24V - 4.1A - 100W.Metal case, Class II, screw terminals.Dimmable 0-10V/PWM/Resistence.Dimming range: 1~100%.
Temperatura / Temperature
tc: + 70°C / ta: + 60°C
Descrizione / Description
Alimentatore LED 24V - 4,17A - 100W.Classe II, morsetti a vite.
LED power supply: 24V - 4.17A - 100W.Class II, screw terminals.
Temperatura / Temperature
tc: + 85°C / ta: + 45°C
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024100.230 100~277V (50/60Hz) 24V 4,1A 100W
1
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024100.242 200~240V (50/60Hz) 24V 4,17A 100W
1
Capitolo • Chapter 05Alimentatori LED 12V-24V12V-24V LED power supplies
225Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALN024100.24324V
Descrizione / Description
Alimentatore LED 24V - 4,16A - 100W.Classe II, morsetti a vite.
LED power supply: 24V - 4.16A - 100W.Class II, screw terminals.
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
1
ALG02424V
Descrizione / Description
Alimentatore LED 24V.Disponibile in varie potenze, da 15W a 200W.Case in metallo, morsetti a vite.
LED power supply: 24V.Available in different powers, from 15W to 200W.Metal case, screw terminals.
Temperatura / Temperature
tc: + 70°C / ta: + 25°C
1
CodiceCode
Tensione di ingresso / Input voltage(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
Dimensioni / DimensionsL x P x H
ALG024015.220
88~264V(47/63Hz)
24V
625mA 15W 62,5 x 51 x 28ALG024025.220 1,1A 25W 78 x 51 x 28ALG024035.220 1,5A 35W 99 x 82 x 36ALG024050.220 2,2A 50W 99 x 82 x 26ALG024075.220 3,2A 75W 99,5 x 97 x 30ALG024100.220 4,5A 100W 159 x 97 x 38ALG024150.220 6,5A 156W 159 x 97 x 30ALG024200.220 8,4A 200W 199 x 99 x 50
CodiceCode
Tensione di ingresso / Input voltage(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALN024100.243 200~240V (50/60Hz) 24V 4,16A 100W
226 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED spina integrata 5V-12V-24V5V-12V-24V wall mount LED power supplies
ALS005010.260 5V
Descrizione / Description
Alimentatore a spina integrata 5V - 2A - 10W.Utilizzabile con cavo USB Type-A / Type-C codice CAV020.00 (vedi pagina 276, capitolo 9) e scheda di controllo CTC011A2 (vedi pagina 166, capitolo 03).
Wall mount power supply: 5V - 2A - 10W.It can be used with USB Type-A / Type-C cable code CAV020.00 (see page 276, chapter 9) and control electronic board code CTC011A2 (see page 166, chapter 03).
Temperatura / Temperature
tc: + 85°C / ta: + 40°C
Descrizione / Description
Alimentatore a spina integrata 5V - 3A - 15W.Utilizzabile con cavo USB Type-A / Type-C codice CAV020.00 (vedi pagina 276, capitolo 9) e scheda di controllo CTC011A2 (vedi pagina 166, capitolo 03).
Wall mount power supply: 5V - 3A - 15W.It can be used with USB Type-A / Type-C cable code CAV020.00 (see page 276, chapter 9) and control electronic board code CTC011A2 (see page 166, chapter 03).
Temperatura / Temperature
tc: + 85°C / ta: + 40°C
ALS005015.260 5V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALS005010.260 100~240V (50/60Hz) 5V 2A 10W
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALS005015.260 100~240V (50/60Hz) 5V 3A 15W
1
1
Capitolo • Chapter 05Alimentatori LED spina integrata 5V-12V-24V5V-12V-24V wall mount LED power supplies
227Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALS01201212V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ColoreColour
ALS012012.240220~240V (50/60Hz) 12V 1A 12W
Nero / Black
ALS012012.241 Trasparente / Transparent
1
ALS012066.19012V
Descrizione / Description
Alimentatore LED 12V - 5,5A - 66W.Cavo di alimentazione con spina Italia e connettore DC Ø 5,5.
LED power supply: 12V - 5.5A - 66W.Power cord with Italian plug and DC connector Ø 5.5.
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALS012066.190 100~240V (50/60Hz) 12V 5,5A 66W
1
Descrizione / Description
Alimentatore LED a spina integrata 12V - 1A - 12W.Disponibile nella versione con case nero o trasparente.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount LED power supply: 12V - 1A - 12W.Available with Black or Transparent case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 75°C / ta: + 40°C
228 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED spina integrata 5V-12V-24V5V-12V-24V wall mount LED power supplies
Descrizione / Description
Alimentatore LED a spina integrata 24V - 500mA - 12W.Disponibile nella versione con case nero o trasparente.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount LED power supply: 24V - 500mA - 12W.Available with Black or Transparent case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 75°C / ta: + 40°C
Descrizione / Description
Alimentatore LED a spina integrata 24V - 250mA - 6W.Fornito con cavo piatto H03VVH2-F 2x0,75 cm 200, colore nero (con plug).Altri cavi da ordinare separatamente (vedi Capitolo 9).
Wall mount LED power supply: 24V - 250mA - 6W.Supplied with H03VVH2-F 2x0.72 flat cable 200 cm, black, (with plug).Different cables type to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 80°C / ta: + 50°C
ALS024012 24V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ColoreColour
ALS024012.240200~240V (50/60Hz) 24V 500mA 12W
Nero / Black
ALS024012.241 Trasparente / Transparent
1
1
ALS024006.170 24V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ColoreColour
ALS024006.170 220~240V (50Hz) 24V 250mA 6W Nero / Black
Capitolo • Chapter 05Alimentatori LED spina integrata 5V-12V-24V5V-12V-24V wall mount LED power supplies
229Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
ALS024024
Descrizione / Description
Alimentatore LED a spina integrata 24V - 1A - 24W.Disponibile nella versione con case nero, trasparente e bianco.Cavo con plug da ordinare separatamente (vedi Capitolo 9).
Wall mount LED power supply: 24V - 1A - 24W.Available with black, transparent and white case.Plug cable to be ordered separately (see Chapter 9).
Temperatura / Temperature
tc: + 80°C / ta: + 45°C
24V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ColoreColour
ALS024024.240
200~240V (50/60Hz) 24V 1A 24W
Nero / Black
ALS024024.241 Trasparente / Transparent
ALS024024.242 Bianco / White
1
ALW012030.180
Descrizione / Description
Alimentatore LED waterproof 12V - 2,5A - 30W.Cavi IN/OUT cm 20.
Waterproof LED power supply: 12V - 2.5A - 30W.IN/OUT cables (cm 20).
Temperatura / Temperature
tc: + 85°C
Waterproof - 12V
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALW012030.180 170~250V (50/60Hz) 12V 2,5A 30W
1
230 Per maggiori informazioni vedi la scheda tecnica sul sito www.easrl.com • For more information see data sheet on the website www.easrl.com
Capitolo • Chapter 05Alimentatori LED waterproof 12V
12V waterproof LED power supplies
ALW012060.180
Descrizione / Description
Alimentatore LED waterproof 12V - 5A - 60W.Doppia uscita.Cavi IN/OUT cm 20.
Waterproof LED power supply: 12V - 5A - 60W.Double exit.IN/OUT cables (cm 20).
12V - Waterproof
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALW012060.180 170~250V (50/60Hz) 12V 5A 60W
1
ALW012045.180
Descrizione / Description
Alimentatore LED waterproof 12V - 3,75A - 45W.Cavi IN/OUT cm 20.
Waterproof LED power supply: 12V - 3.75A - 45W.IN/OUT cables (cm 20).
Temperatura / Temperature
tc: + 85°C
12V - Waterproof
CodiceCode
Tensione di ingressoInput voltage
(Vac)
Uscita / Output(Vdc)
Uscita / Output(A)
Max Load(W)
ALW012045.180 170~250V (50/60Hz) 12V 3,75A 45W
1