Page 1 of 2

The information provided is to our best knowledge, true & accurate. Subjected to change without notification due to continual product research and development.

Revision 08/11/17

Superceding issue of

23/09/15

MAXICOOL SERIES Premium Radiator Coolant/Antifreeze

Revision 05/01/18 Superceding issue of 23/09/15

MaxPro1 MaxiCool Series consists of a concentrated (MaxiCool Conc.) and a diluted (MaxiCool Premix) versions of a trusted formulation of anti-freeze/coolant. It is based on Organic Acid Technology (OAT), which is free from amine, silicate, borax, nitrite and phosphate. It contains proven inhibitors to prevent rust and corrosion for all cooling system metals including aluminum. Both products can be further diluted for less harsh condition uses. However, dilution will reduce its intended full long term benefits.

MaxPro1 MaxiCool Conc. can be easily diluted with water to meet the specific requirements of individual end users. Demineralized water is preferred to prevent hard water deposits and scale build-up that can occur with the use of ordinary tap water. It usually achieves optimum performance at 60% concentration.

MaxPro1 MaxiCool Premix is a ready-to-use (50% dilution) formulation, and is compatible with all major brands of anti-freeze/coolant. It will not affect the common hoses and gaskets in a cooling system. MaxiCool Premix provides effective frost and corrosion protection of a properly maintained automotive cooling system for up to 80,000 km. It is recommended that the radiator anti-freeze/coolant be replaced every three to five years (depending on usage).

APPLICATIONS

MaxPro1 MaxiCool series can be used in the cooling systems of all types of liquid-cooled automotive and industrial internal combustion engines.

The products are also suitable used in farm, off-highway and marine engines, but may sometimes need to be combined with supplemental coolant additives (SCA), see owner's manual when in doubts.

FEATURES AND BENEFITS

A high quality OAT coolant with expected service life of 3 years or 80,000 km

No silicate dropouts or gel formation during storage or use Compatible with all conventional antifreeze/coolant in the market. Compatible with the common plastic materials and metal parts in a

cooling system Superior winter freezing and summer boil over protection Good foam resistance Superior heat transfer properties Good corrosion control to prevent rust and corrosion on ferrous and

non-ferrous metals

Page 2 of 2

The information provided is to our best knowledge, true & accurate. Subjected to change without notification due to continual product research and development.

Revision 08/11/17

Superceding issue of

23/09/15

MAXICOOL SERIES Premium Radiator Coolant/Antifreeze

Revision 05/01/18 Superceding issue of 23/09/15

PERFORMANCE LEVEL

Meet the performance requirements of:

ASTM D3306 BS 6580

TYPICAL PROPERTIES

Grade Test Method MaxiCool Conc.

MaxiCool Premix

Product Code 7011 7012

Density @ 20°C, kg/l

ASTM D4052 1.125 1.060

Appearance Visual Fluorescent green

Fluorescent green

Odour Smell Non-offensive Non-offensive

Miscibility with water

- Indefinite Indefinite

Flash Point, °C ASTM D92 >100 >100

Boiling Point, °C ASTM D1120 109 (50% dil.) 109

Freezing Point, °C ASTM D1177 -38 (50% dil.) -38

pH Value ASTM D1287 8.5 (50% dil.) 8.5

Ash Content ASTM D1119 0.4 0.2

Refractive Index @ 20°C

ASTM D1218 1.435 1.385

AVAILABLE SIZE AND PART NUMBER

1L 18L 200L MaxiCool Conc. 7011-01 7011-18 7011-200 MaxiCool Premix 7012-01 7012-18 7012-200