P R E S E N T S

F E A T U R I N G00709000 BACKSTOP WINCH

The 00709000 is a revolutionary electric winch that was patented and designed specifically for use on basketball backstop positioning applications. This winch raises the industry standard to new heights for safety, simplicity of installation, space efficiency, aesthetics, and ease of use.

The 00709000 electric winch is designed to lift an 1800lb backstop assembly at a line speed of 12ft (3.4m) per minute. For safety, the unit has a line stall pull of 2200lbs (1000kg). The cable travel is 25ft (7.7m) on one layer, with a maximum travel of 40ft (12m). Built in North America, it is compact and weighs only 54lbs (24.5kgs) allowing for unprecedented ease of installation. All main frame components are E-coated and all exposed sub-components are plated for maximum corrosion protection.

•Composite material creates superior strength and long life•Minimal maintenance, oil free

D i r e c t D r i v e

•Inherently self-locking 2-stage worm drive •Automatic drive pinion brake assures fast and positive locking

U n i q u e D u a l B r a k e S y s t e m

•Driven by an instantly reversing, 120 volt, 10 amp, 1HP Motor•May operate with a cordless drill when power is not accessible

P o w e r f u l 1 H P M o t o r

•Guaranteed to be manufactured to the highest standards5 Y e a r W a r r a n t y

•Partially enclosed design helps keep out dust and dirt•Three rope exit ports allow increased freedom of mounting orientation and cable layout•Pressure Roller on cable and grooved tapered drum ensure accurate cable spooling every time.

I n n o v a t i v e F r a m e D e s i g n

•Readily adjustable upper and lower travel limit switches allow for easy setting of stop positions

T r a v e l L i m i t S w i t c h e s

U L L i s t e d A s s e m b l y

SpecificationsTypical D

imensions

15.1”

6.5”

13.1”13.8”3.7”

11.0”

The 00720000 is a market moving electric winch raising the industry standard in divider curtain design capability. Featuring the patented POSILOK™ safety device and an interlocking steel frame, the 00720000 elevates expectations in curtain safety.

P R E S E N T S

F E A T U R I N G

•Motor designed to stall at safe load value•Thermally protected, low maximum current draw design•May operate with a cordless drill when power is not accessible

D u r a b l e 1 H P M o t o r

The 00720000 curtain winch

is designed to lift an 1800 inch lb

torque load (approx. 600lb

curtain) assembly at a line speed

of 13ft/3.96m per minute. Uses

the proprietary POSILOK™

over-speed safety device.

Built in North America, it is

compact and weighs only 64lbs

(29.1kgs) allowing for unprec-

edented ease of installation.

All-steel main frame is E-coated

for maximum corrosion

protection and semi-enclosed

for safety purposes. •Patented interlocking steel frame for high rigidity and precise alignment, E-coated for corrosion resistance•Semi-enclosed design keeps out dust and dirt, increases safety

S t e e l F r a m e

•Double worm gearing and unidirectional brake allow a faster lifting speed•Manual lowering capability

U n i q u e U n i d i r e c t i o n a l B r a k e

•Patented POSILOK™ over-speed safety device prevents curtain from achieving unsafe lowering speeds

S a f e t y D e v i c e

•Heavy duty upper and lower limit switches, gear driven for high accuracy•Long-travel limit adjustment for accuracy and repeatability•Laser machined limit drive gears for precise positioning

T r a v e l L i m i t S w i t c h e s

SpecificationsTypical D

imensions

007 2 0 0 0 0 C U R T A I N W I N C H

14.0”12.2”

11.7” 8.8”

6.0”

3.5”

•Guaranteed to be manufactured to the highest standards

5 Y e a r W a r r a n t y