PROTECTIVE COATINGA wide range of SAFECORE protective & decorative coating system that includes solvented and

solvent free, water based Epoxy, Polyurethane, MMA based coating for industrial floor / wall & steel structures for decorative, chemical and acid resistance. FAIRCOAT range of anti- carbonation protective &

decorative coating for exterior / interior surface of building.

The House of Construction ChemicalsThe House of Construction ChemicalsIn technical collaboration with M/s. RBP Ltd. U. K.

An ISO 9001Certified

An ISO (EMS)14001 Certified

An OHSAS18001 Certified

In technical collaboration with M/s. RBP Ltd. U. K.

An ISO 9001Certified

An ISO (EMS)14001 Certified

An OHSAS18001 Certified

®

USESFAIRCOAT provides a smooth decorative durable coating for concrete and masonary surfaces.

PACKING AND COVERAGEAvailable in 1, 5 and 20 kg.Coverage: 4-5m²/kg/two Coats (Recommended DFT 200 microns) depending upon the surface.

<<

BENEFITSAnti-carbonation propertiesForms flexible filmAllows substrate to breathChoice of coloursNon-toxic/Non-flammableExcellent waterproof coating.

DESCRIPTIONFAIRCOAT is a ready to use, aliphatic elastomeric based smooth protective, decorative anti-carbonation coating for interior / exterior surfaces with exceptional weathering characteristics conforming to IS 15489 : 2004. It contains special polymers and fillers and has been specially designed for the decoration and protection of concrete against attack from atmospheric carbon dioxide, airborne chlorides, acid rain, weathering

<<<<<<

etc.

FAIRCOATProtective, decorative, anti-carbonation coatingfor exterior/interior surfaces

FAIRCOAT A

BENEFITS

Gives a textured finish

Anti-carbonation properties

Good weathering properties

Excellent bond.

Choice of colors

Non toxic/Non flammable

Excellent waterproof coating.

DESCRIPTION

FAIRCOAT A is a ready to use elastomeric aqueous

based textured protective, decorative anti-

carbonation coating for interior and exterior

su r f aces w i th e xcep t i ona l wea the r i ng

characteristics conforming to IS 15489 : 2004. It

contains special polymers and fillers and has been

specially designed for the decoration and protection

of concrete against attack from atmospheric carbon

dioxide, airborne chlorides, acid rain, weathering etc.

<

<

<

<

<

<

<

It has an excellent gap bridging ability and does not

age with time, and forms an extremely durable film.

USES

FAIRCOAT A is used to provide a textured decorative

durable coating for concrete and masonry surfaces.

PACKING AND COVERAGE

Available in 1, 5 and 20 kg.

Coverage: 3-4m²/kg/two Coats (Recommended

DFT 200 microns) depending upon the porosity

of surface.

<

<

Textured protective, decorative, anti-carbonationcoating for exterior/interior surfaces

FAIRCOAT INSULTECH

BENEFITS

Anti Carbonation properties

Provides a Protective Thermal barrier that can

enhance building climatic conditions, and

reduce utility costs.

Gap bridging properties

Allows substrate to breathe

Non - toxic and Non - flammable

Excellent water proofing coating

Temperature reduction from 8% to over 20% -

protect against wind and rain.

<

<

<

<

<

<

<

<

<

<

<

Enhances life of structure

Covers and seals crack.

DESCRIPTION

FAIRCOAT INSULTECH is a new technology, rubber

like coating that seals, expands and contracts with

the surface it covers. Also, it protects from wind and

rain & resists cracking & peeling from severe heat

and cold.

PACKING AND COVERAGE

Available in 1, 5 and 20 Kgs

Coverage: 4-5 m² / kg / two coats. However,

the coverage depends upon the surface.

High performance, long lasting, flex thermal,decorative, anti-carbonation coating forexterior / interior surfaces

The House of Construction Chemicals

visit us at : www.fairmate.comThe House of Construction Chemicals

visit us at : www.fairmate.com

visit us at : www.fairmate.comThe House of Construction ChemicalsThe House of Construction Chemicals

FAIRMATE

FAIRMATE

QUALITY FOCUS

VALUES

Customer Delight :

is an Indian Multi-national construction chemicals manufacturing company having offices and operations in various parts of the world. We have our Corporate office in Baroda, India and our branch offices are spread across country. FAIRMATE is serving Construction Industry for more than three decades. Apart from our existing manufacturing facilities in India, Dubai and Far-East, FAIRMATE has widened its presence to few more countries like Nepal, Pakistan, Sri Lanka, South Korea, Turkey, Lebanon and Qatar etc.

manufactures complete range of construction chemicals and is also providing total cost-effective solutions and World Class Services to Speciality Construction Chemical Industry by using our expertise and strategic alliances with leading partners. We have a primary technical collaboration with M/s Resin Building Products Ltd., UK and M/s Morton Chemicals, USA. Our continuous research and efforts in developing new products have resulted in introducing more than 350 products in the Civil Engineering Industry. Our products are broadly classified as Concrete Admixture, Waterproofing System, Engineering Grouts, Industrial Flooring System, Surface Treatment, Concrete Repairs, Pre-packed Concrete and Mortar, Protective Coating, Sealants, Highway Repairs and Fire Protection systems.

FAIRMATE has set-up its plant and state-of-art R&D centres in various parts of the globe. Quality has always been an integral part of Management Philosophy. Ensuring international standard products to our esteemed customers, we have been accredited by ISO 9001 and ISO (EMS) 14001, which emphasize the quality system of each and every step of processing and 'zero' defect operations. We have gone further and have implemented ISO (OHSAS) 18001, which relates to total operational Health and Safety. To ensure Total Customer Satisfaction FAIRMATE is now marching towards “SIX SIGMA”.We are proud to share with you that FAIRMATE has now become the member of IGBC - Indian Green Building Council, Hyderabad. We are now part of Green Building movement.

The values that drive us underscore our commitment to: consistently surpass customer expectations.

FAIRMATE also ensures application of the products through authorized trained applicators.FAIRMATE caters to a large group of customers ranging from multinational companies to individual domestic customers. We have a wide network in India as well as internationally.

< Africa Bangladesh Bhutan Nepal Qatar Singapore Srilanka Thailand U.A.E Vietnam

<<<<<<<<<

BHUBANESWAR FACTORY

BENGALURU FACTORY

The House of Construction Chemicalsvisit us at : www.fairmate.com

DESCRIPTION

SAFECORE EP (F) is a two pack, high build,

solvented epoxy coating for concrete substrates.

It provides a durable coating suitable for

application to both vertical and horizontal surfaces.

USES

SAFECORE EP(F) is used to protect concrete

floors, enhanced resistance to oil, grease, water

penetration, dust, abrasion and chemical attack.

BENEFITS

Easily applied on dry or damp surfaces.

Excellent protective properties.

Minimum surface preparation required.

Excellent overcoating characteristics.

Excellent bond with concrete substrates.

Ensures dust proof floor.

<

<

<

<

<

<

SAFECORE EP(S)Solvented high build protective & decorativecoating for steel surfaces

DESCRIPTION

SAFECORE PU is a two component weather

stabilized Acrylic Aliphatic High Build Polyurethane

coating for corrosion protection. It penetrates

the surface to bind together to produce a

hardwearing surface.

USES

Used to protect concrete and steel substrate and

increase resistance to oil, grease, water

penetration, abrasion and chemical attack.

BENEFITS

<

<

<

<

<

<

<

Excellent chemical resistance.

Easily applied by brush or roller

Excellent protective properties.

Hardwearing : Good resistance to abrasion.

Non dusting : Totally seal the concrete

surface preventing dusting.

Resistance to thermal shocks.

Available in attractive & pleasant colors

DESCRIPTION

SAFECORE SF is a two part, epoxy based, high-

build, solvent free, protective coating for

concrete and steel surfaces. The cured film is

extremely tough, and has a smooth, hard, semi -

glossy finish with good slip resistance properties.

SAFECORE SF has an excellent adhesion to

concrete and metal surfaces.

USES

SAFECORE SF is used as a hard wearing,

hygienic, chemical resistant and taint free

coating, suitable for contact with foodstuffs

and potable water after cure.

<

BENEFITS

Excellent adhesion to concrete and steel

surfaces

Very good chemical resistance

Solvent free

Low odor and taint free

Corrosion resistant

<

<

<

<

<

SAFECORE SFA thixotropic solvent free protective coatingfor concrete and steel surfaces

provide protection from weathering abrasion and

corrosion.

Can be used on steel and galvanised steel

substrates.

To protect steel surfaces and for enhanced

resistance to oil, grease, water penetration,

abrasion and chemical attack.

PACKING AND COVERAGE

Available in a 5 kg pack.

Coverage: approximately 12-14 m²

for recommended two coats.

USES

<

<

<

< per pack

BENEFITS

Excellent protective properties.

Excellent overcoating characteristics.

Can be used for rebars-does not effect

bonding of concrete with steel.

Available in different colours.

SAFECORE EP (S) is a two pack, high build,

solvented epoxy coating for steel structures to

<

<

<

<

DESCRIPTION

SAFECORE PUHigh build protective & decorativepolyurethane coating

SAFECORE EP(F)Solvented high build protective & decorativecoating for concrete floors & walls

The House of Construction Chemicals

PACKING & COVERAGE

Available in 5 Kg pack

Coverage: approximately 12-14 m² per pack

for recommended two coats.

<

<

PACKING & COVERAGE

<

< per pack

Available in 5 kg pack consisting of base and

hardner.

Coverage: 20- 25m² for a two coat

application achieving DFT of (125 - 135

microns).

<

<

Applicable on floors, walls and ceilings.

SAFECORE SF provides a tough, hygienic,

chemical resistant coating for walls, floors

and ducts in dairies, abattoirs, food

processing areas etc.

It is particularly suitable for lining concrete

of water reservoirs since it is taint-free.

PACKING AND COVERAGE

Available in 5 kg pack.

Coverage: 5kg pack will cover approx 9-10m²

with the recommended two coat treatment with

an overall dry film thickness of 400-450 microns.

FAIRCOAT CLEAR

It is an aqueous based creamy, silane-based, protective,

decorative, anti-carbonation coating having thixotropic

property and outstanding ability to impregnate high

quality concrete and reinforced concrete.

SAFECORE LP

It is a lapoxy, hard wearing, hygienic, high solid taint

free coating, improves performance, excellent

weathering characteristics, flexibility, Abrasion

resistant, good mechanical properties, gives semi

glossy furnish. Coverage : 8-9m² per 5 kg pack per two

coat.

SAFECORE AR

High build, solvent free flexible epoxy coating.

Thixotropic hardwearing & hygienic chemical resistant

coating. Good chemical and acid resistance with

flexibility. DFT: 400 to 500microns.

Coverage : 9-10m² per 5kg pack per two coat.

and epoxy coating. Also it is UV resistant, has low

viscosity, excellent chemical resistant and quick

cure time.

SAFECORE AS

High performance, single pack resin based floor

coating, has slip resistant in dry condition, good

chemical and abrasion resistant, non - toxic, good

bonding with surface and available in different 2colors. Coverage: 8 -10 m per litre.

SAFECORE VC

It is a two pack vinyl ester based coating for

concrete and steel surfaces with outstanding

resistance to aggressive acids, solvents and

alcohols. It provides excellent flexibility, adhesion

and hardness to steel and concrete and is tough,

durable and abrasion resistant.

Coverage: 9-10m² per 5kg per two coats.

DFT: 150 to 200 microns.

SAFECORE CE

High build, solvent free flexible epoxy coating.

Thixotropic hardwearing and hygienic chemical

resistant coating. Good chemical and acid

resistance with flexibility.

DFT: 400 to 500microns. Coverage : 12-13m² per

5 kg. pack per two coats.

SAFECORE ZRP

It is a two part, epoxy zinc rich primer, which can

be applied on steel galvanized surfaces to protect

the surface from weathering & chemical resistant.

It can be over coated with epoxy, polyurethane or

chlorinated rubber etc. and does not get affected

by welding or cutting operation of steel.

Coverage: 11-12m² per 5kg per two coats.

SAFECORE PU SEALER

Two part aromatic polyurethane base clear

coating for interior use only. It provides glossy,

tack free surface and has excellent adhesion to

concrete, marbles, stonework, galvanized sheet

OUR OTHER PROTECTIVE COATING RANGE OF PRODUCTS

LIST OF OUR VALUED CLIENTS

In technical collaboration with M/s. RBP Ltd. U. K.

An ISO 9001Certified

An ISO (EMS)14001 Certified

An OHSAS18001 CertifiedThe information given in this data sheet is based on both the current development work and many years of field experience. Whilst every effort is made to ensure that the information is reliable, we cannot accept the

responsibility for any work carried out with our materials as we have no control over methods of application, site conditions etc. In view of the continuing research and development being undertaken in our laboratories we advise customers in their own interest to ensure that this data sheet has not been supersede by a more up-to-date publication. All products are sold subjected to our standard conditions of sale which are available on request. Field services, where provided, does not constitute supervisory responsibility. For additional information, please contact our local FAIRMATE representative.

The House of Construction Chemicals

visit us at : www.fairmate.comThe House of Construction Chemicals

CLIENTS< Reliance Group of Company

< Sardar Sarovar Narnada Nigam Ltd.

< National Highway Authority Of India

< National Hydroelectric Power Corporation Ltd.

< Indian Oil Corporation Ltd.

< Indian Petro Chemicals Ltd.

< Gujarat State Fertilizers Corporation Ltd.

< National Thermal Power Corporation Ltd.

< Air Port Authority of India Ltd.

< Delhi Metro Rail Corporation Ltd.

< Adani Power Ltd.

< Tata Power Ltd.

CONSULTANTS< Engineers India Ltd.< Stanley - Rites JV< Jacobs Engineering India Pvt. Ltd.< Uhde India Ltd.< Tata Consultants< Gherzi Eastern< MECON< Bechtel Ltd., France< SMPS Consultants< Le-ND Consultants< Humphry & Glasgow< Kvaerner Power Gas Ltd.< Stup Consultants Pvt. Ltd.

CONTRACTORS< Larsen & Toubro Ltd ECC Division< Jayprakash Associates Ltd.< Punj Lloyd Ltd.< Shapoorji Pallonji & Co. Ltd.< Simplex Infrastructure Ltd. < Gammon India Ltd.< Paharpur Cooling Towers Ltd.< Toyo Engineering Ltd.< ESSAR Constructions Ltd.< Gannon Dunkerly & Co. Ltd.< Hindustan Construction Company Ltd.< Soma Enterprises< Bridge and Roof Company Ltd.< Patel Engineering Ltd.

FM/10/09/A

INDIA

For more details visit us at: www.fairmate.com | www.waterproofing4u.com

AFRICA NEPAL OMAN PAKISTAN QATAR SAUDI ARABIA SINGAPORE SRI LANKA

Hamriyah Free Zone, P.O. BOX No. : 42023, Sharjah, UAE.

Tel. : +9716 5261052, Fax : +9716 5261053 Mobile : +971 50 4355048 email : sales@fairmate.ae

DUBAI

BARODA :

AHMEDABAD :

BENGALURU : DELHI :

KOLKATA : MUMBAI :

UDAIPUR : JAIPUR : LUCKNOW :

8/1, "SAI SUDHA", Tel. : (0265) 2358173-74, 2331193, 2331399 Fax : (0265) 2338733 Email : sales@fairmate.net

3, Ramkrupa Appartment, B/h Center Point, Panchvati 1st Lane, Ambawadi, Ahmedabad-380 006. Tel. : (079) 26465219 Tel./Fax : 26465577

Tel. (080) 23639852 Tel./Fax : (080) 23639851 Email : bangalore@fairmate.net Tel./Fax : (011) 27306224/82 Mobile 9810032422 Email :

delhi@fairmate.net Tel. : (033) 24404932 Tel. : (022) 28794045, 28794044 Mobile 9820291610 Email : mumbai@fairmate.net

Mobile 09829699943 Mobile 09829688843 Mobile 9415022470

Arunoday Society, Alkapuri, Baroda-390 007.

Mobile 09850817020 Mobile 09813972551

Mobile 09847169473 Mobile 09719402888 Mobile 09815039539

SANGLI : PANIPAT :

KOCHI : AGRA : JALANDHAR :