Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
КАТАЛОГ ПРОДУКЦИИ
1
CONTENTS
GENERAL
Introduction 3The International Team for Implantology (ITI) 4The Straumann Guarantee 5Important Guidelines 6List of symbols 7Explanation of coding and types 8Explanation of labeling 9Additional information 10Contacts 14
GENERAL PAGE
Introduction 3The International Team for Implantology (ITI) 4The Straumann Guarantee 5Important Guidelines 6List of symbols 7Explanation of coding and types 8Explanation of labeling 9Additional information 10Contacts 14
REGENERATION
Straumann® Emdogain and Straumann® PrefGel 20Straumann® BoneCeramic 21Straumann® Bone Block Fixation 1.5 mm 22
REGENERATION
Straumann® Emdogain and Straumann® PrefGel 20Straumann® BoneCeramic 21Straumann® Bone Block Fixation 1.5 mm 22
SURGERY
Implants 24� Overview titanium implants 24� Overview Roxolid® Implants 26� Standard implants 27� Standard Plus implants 33� Tapered Effect implants 42� Bone Level implants 47� TempImplants 55Surgical instruments� Surgical planning aids 56� Implant bed preparation instruments 58� Auxiliary instruments 66� Surgical cassette 68� Osteotomes 69� Explantation 72Straumann® CARES® Guided Surgery� coDiagnostiX™ 75� gonyX™ 76� Guided Surgery instruments 78� Auxiliary instruments 82� Guided Surgery Cassette 84
SURGERY
Implants 24� Overview titanium implants 24� Overview Roxolid® Implants 26� Standard implants 27� Standard Plus implants 33� Tapered Effect implants 42� Bone Level implants 47� TempImplants 55Surgical instruments� Surgical planning aids 56� Implant bed preparation instruments 58� Auxiliary instruments 66� Surgical cassette 68� Osteotomes 69� Explantation 72Straumann® CARES® Guided Surgery� coDiagnostiX™ 75� gonyX™ 76� Guided Surgery instruments 78� Auxiliary instruments 82� Guided Surgery Cassette 84
PROSTHETICS
Cassettes, inserts and storage system 86Prosthetic instruments 87Prosthetics for Straumann® Standard, Standard Plus and Tapered Effect Implants 89� Prosthetic planning aids 89� Straumann® CARES® Implant-borne prosthetics 93� Crowns and bridges 99� Hybrid dentures 129Prosthetics for Straumann® Bone Level implants 151� Prosthetic planning aids 151� Straumann® CARES® Implant-borne prosthetics 157� Crowns and bridges 161� Hybrid dentures 188Straumann® Classic 208
2
PROSTHETICS PAGE
Cassettes, inserts and storage system 86Prosthetic instruments 87Prosthetics for Straumann® Standard, Standard Plus and Tapered Effect Implants 89� Prosthetic planning aids 89� Straumann® CARES® Implant-borne prosthetics 93� Crowns and bridges 99� Hybrid dentures 129Prosthetics for Straumann® Bone Level implants 151� Prosthetic planning aids 151� Straumann® CARES® Implant-borne prosthetics 157� Crowns and bridges 161� Hybrid dentures 188Straumann® Classic 208
SERVICE
Service materials 220
SERVICE
Service materials 220
INDEX
Alphabetical index 224
INDEX
Alphabetical index 224
At Straumann we are committed to providing high-quality and innovative solutions for dental professionals, as simply and efficiently as possible. This principle extends to our Product Catalog, which has been updated to help you more easily locate the most appropriate products for your needs.
You will find the contents of this catalog listed by procedure – allowing you to select the most suitable products according to the nature of the case – as well as indexed by article number and name.
Straumann® products receive the support of our scientific partners, the International Team for Implantology. We focus on the primary areas of implant and restorative dentistry and oral tissue regeneration and offer a comprehensive range of solutions in each of these areas:
Regeneration – materials and components devised to help restore naturally functioning teeth.
Surgery – implants, instruments and aids developed for those indications where a surgical intervention is required.
Prosthetics – abutments, copings and other prosthetic components designed for completion of a high-quality and functional procedure.
Although flexibility in treatment options is important to us, we feel that true Straumann quality can only be guaranteed when you choose original Straumann® products at every stage of the procedure.
We hope you find this catalog both interesting and informative. Please do not hesitate to contact your local Straumann representative for further information or visit our e-shop for 24/7 access to the full product range.
You can access the e-shop portal most relevant to your needs via your local Straumann website (i.e. www.straumann.ch for customers in Switzerland, www.straumann.de for Germany, etc.). Then simply click on the ‘e-shop’ tab within the menu at the top of the screen to be linked through to the shop.
GEN
ERAL
INTR
OD
UC
TIO
N
INTRODUCTION
3
The International Team for Implantology (ITI) unites professionals around the world from every field of implant dentistry. As an independent academic association, it actively promotes networking and exchange among its members and offers a wide array of membership benefits. In more than 30 years, the ITI has built a reputation for scientific rigor combined with concern for the welfare of patients. The organization focuses on the development of well-documented treatment guidelines backed by extensive clinical testing and the compilation of long-term results.
Straumann and the ITI enjoy a unique partnership. We are united by a shared mission: to constantly improve treatment methods and results in implant dentistry and related tissue regeneration for the benefit of patients.
Learn more about the ITI and register as a member at www.iti.org
GEN
ERAL
THE INTERNATIONAL TEAM FOR IMPLANTOLOGY (ITI)
THE INTERNATIONAL TEAM FOR IMPLANTOLOGY (ITI)
4
The new Straumann Guarantee applies if Straumann® products are used in combination with other original Straumann® products. Provided that the conditions of the Straumann Guarantee are fulfilled, the following guarantee periods are covered:
5-year guarantee period: for ceramic restorationsReplacement with an equivalent ceramic abutment (attached to a Straumann® Implant) or with an equivalent ceramic crown, coping or bridge restoration (for tooth and implant-supported restorations).
10-year guarantee period: for metal restorationsReplacement with an equivalent metal abutment (attached to a Straumann® Implant) or with an equivalent metal restoration (for tooth and implant- supported restoration).
Lifetime guarantee period: for implantsReplacement with an equivalent implant and an equivalent abutment, if necessary.
NoteFor applicable terms and conditions of the Straumann Guarantee (including theGuarantee territory) please refer to the Straumann Guarantee brochure (152.360/en).
GEN
ERAL
THE
STRA
UM
AN
N G
UA
RAN
TEE
THE STRAUMANN GUARANTEE
5
Please notePractitioners must have appropriate knowledge and instruction in the handling of the Straumann® dental implants, Straumann CADCAM products, Straumann regenerative products or other Straumann products (“Straumann Products”) for using the Straumann Products safely and properly in accordance with the instructions for use.
The Straumann Product must be used in accordance with the instructions for use provided by the manufacturer. It is the practitioner’s responsibility to use the device in accordance with these instructions for use and to determine, if the device fits to the individual patient situation.
The Straumann Products are part of an overall concept and must be used only in conjunction with the corresponding original components and instruments distributed by Institut Straumann AG, its ultimate parent company and all affiliates or subsidiaries of such parent company (“Straumann”) or third party distributors. Use of products made by third parties, which are not distributed by Straumann, will void any warranty or other obligation, express or implied, of Straumann.
AvailabilitySome of the Straumann Products listed in this document may not be available in all countries.
CautionIn addition to the caution notes in this document, our products must be secured against aspiration when used intraorally.
ValidityUpon publication of this document, all previous versions are superseded.
Documentation For detailed instructions on the Straumann Products contact your Straumann representative.
Copyright and trademarksStraumann® documents may not be reprinted or published, in whole or in part, without the written authorization of Straumann.
Straumann® and/or other trademarks and logos from Straumann® mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates.
GEN
ERAL
IMPO
RTAN
T GU
IDELIN
ES
IMPORTANT GUIDELINES
6
…min.
…max.
XXXX
…max.
…min.
STERILENON
Batch code Non-sterile
Catalog number Caution, consult accompanying documents
Sterile Use by
Sterilized using aseptic processing techniques
Keep away from sunlight
Sterilized using irradiation Keep away from sunlight
Lower limit of temperature Straumann Products with the CE mark fulfill the requirements of the Medical Devices Directive 93/42 EEC
Upper limit of temperaturexxxx identify the notified body of manufacturer
Temperature limitation Consult instructions for use
Caution: Federal law restricts this device to sale by or on the order of a dental professional
Manufacturer
Do not re-use Date of manufacture
Non-sterile
GEN
ERAL
LIST
OF
SYM
BOLS
LIST OF SYMBOLS
7
Color coding
yellow Endosteal implant diameter 3.3 mm
red Endosteal implant diameter 4.1 mm
green Endosteal implant diameter 4.8 mm
Implant types
S Standard Implant
SP Standard Plus Implant
TE Tapered Effect Implant
BL Bone Level Implant
Connection types
NNC: Narrow Neck CrossFit® Ø 3.5 mm
Ø 3.5 mm
NN: Narrow Neck Ø 3.5 mm
Ø 3.5 mm
RN: Regular Neck Ø 4.8 mm
Ø 4.8 mm
WN: Wide Neck Ø 6.5 mm
Ø 6.5 mm
NC: Narrow CrossFit® Ø 3.3 mm
Ø 3.3 mm
RC: Regular CrossFit® Ø 4.1 and Ø 4.8 mm
Ø 4.1 mm Ø 4.8 mm
GEN
ERAL
EXPLANATIO
N O
F CO
DING
AND TYPES
EXPLANATION OF CODING AND TYPES
8
SPØ 3.3 NN
8
SPØ 3.3 NNC
SLActive8
SPØ 4.1 RNSLActive
10
TEØ 4.8 WNSLActive
12
BLØ 4.1 RCSLActive
12
SPØ 3.3 NN
8
SPØ 3.3 NNC
SLActive8
SPØ 4.1 RNSLActive
10
TEØ 4.8 WNSLActive
12
BLØ 4.1 RCSLActive
12
SPØ 3.3 NN
8
SPØ 3.3 NNC
SLActive8
SPØ 4.1 RNSLActive
10
TEØ 4.8 WNSLActive
12
BLØ 4.1 RCSLActive
12
SPØ 3.3 NN
8
SPØ 3.3 NNC
SLActive8
SPØ 4.1 RNSLActive
10
TEØ 4.8 WNSLActive
12
BLØ 4.1 RCSLActive
12
SPØ 3.3 NN
8
SPØ 3.3 NNC
SLActive8
SPØ 4.1 RNSLActive
10
TEØ 4.8 WNSLActive
12
BLØ 4.1 RCSLActive
12
Connection type
Implant type
Endosteal diameter
128 Barcode
Use by
Do not re-use
Straumann Products with the CE mark fulfill the requirements of the Medical Devices Directive 93/42/EEC
Caution, consult accompanying documents
Batch code
Catalog number
Sterilized using irradiation
Manufacturer
The Green Dot
Surface type
Caution: Federal law restricts this device to sale by or on the order
of a dental professional
Length of the SLA®/SLActive® surface
EXAMPLES
Straumann® Standard Plus ImplantEndosteal diameter 3.3 mmNarrow Neck8 mm SLA®
Straumann® Standard Plus Implant Endosteal diameter 3.3 mmNarrow Neck CrossFit®
8 mm SLActive®
Straumann® Standard Plus ImplantEndosteal diameter 4.1 mmRegular Neck10 mm SLActive®
Straumann® Bone Level ImplantEndosteal diameter 4.1 mmRegular CrossFit®
12 mm SLActive®
Straumann® Tapered Effect ImplantEndosteal diameter 4.8 mmWide Neck12 mm SLActive®
GEN
ERAL
EXPL
AN
ATIO
N O
F LA
BELIN
G
EXPLANATION OF LABELINGEXAMPLE OF A LABEL ON IMPLANT PACKAGING
9
The properties of unalloyed grade 4 titanium for implants and abutments
a) Chemical composition
O0.40 % max.
Fe0.50 % max.
C0.10 % max.
N0.05 % max.
H0.012 % max.
TiBalance
b) Mechanical properties
Strength Elongation Modulus of elasticity
Forged/annealed 550 MPa min. 15 % min. 110 GPa
Cold-worked 680 MPa min. 10 % min. 110 GPa
Ti-N = titanium nitride-coating Process: Layer thickness: Color:
PVD (physical vapor deposition) 3–12 µm golden yellow
c) Technical information
Grade 4 titanium conforms to the ISO 5832-2 standard
The properties of the alloy Titanium Aluminium-6 Niobium-7 (TAN) for Straumann® abutments
a) Chemical Composition
Al5.5– 6.5 %
Nb6.5– 7.5 %
Ta0.50 % max.
Fe0.25 % max.
O0.20 % max.
C0.08 % max.
N0.05 % max.
H0.009 % max.
TiBalance
b) Mechanical properties
Strength Elongation Modulus of elasticity
Annealed 900 MPa min. 10 % min. 110 GPa
c) Technical information
The alloy Titanium Aluminium-6 Niobium-7 (TAN) conforms to the ISO 5832-11 standard
GEN
ERAL
AD
DITIO
NA
L INFO
RMATIO
N
ADDITIONAL INFORMATIONMATERIAL INFORMATION
10
Alloys Ceramicor® Elitor®
Color white yellowish
Composition Au Pt Pd Ag Cu Ir Others
%%%%%%
+ = <1 %
60.019.020.0
1.0
68.62.54.0
11.810.6
+Zn 2.5
Melting range °C°F
1400–1490 2552–2714
880–9401616–1724
Coefficient of thermal expansion
CTE °C
CTE °F
25–500 °C = 11.9 µm/m X °C25–600 °C = 12.2 µm/m X °C
77–932 °F = 11.9 µm/m X °F77–1112 °F = 12.2 µm/m X °F
Hardness in as-delivered condition
HV5 220 260
Hardness after casting-on or soldering
HV5 205self-hardening
>260self-hardening
Hardened HV5 205 275
0.2 % Proof stress (Rp 0.2 %) as-delivered condition
N/mm2 780 780
0.2 % Proof stress (Rp 0.2 %) after casting-on or soldering
N/mm2 635 655
Possibilities for metallic bonding
casting-on or soldering soldering
Technical information Applications
Non-oxidizing alloy for casting-on with precious metal alloys or for soldering with precious metal or
non-precious metal alloys
Alloy for construction elements attachments
GEN
ERAL
AD
DIT
ION
AL
INFO
RMAT
ION
ADDITIONAL INFORMATIONMATERIAL INFORMATION
11
Alloys Esteticor® Cosmor H
Color pale yellow
Composition Au + Pt-MetalsAu PtPd In Ir
%%%%%%
96.578.510.0
7.83.50.2
Melting range °C°F
1120–1280 2048–2336
Coefficient of thermal expansion
CTE °C
°F
25–500 °C = 13.8 µm/m X °C25–600 °C = 14.0 µm/m X °C
77–932 °F = 13.8 µm/m X °F77–1112 °F = 14.0 µm/m X °F
ISO 9693 pos. 6.3.3.3 positive
Hardness after firing HV5 215
Tensile strength (Rm) after firing
N/mm2 705
0.2 % Proof stress (Rp 0.2 %) after firing
N/mm2 565
Elongation at break (A5) after firing
% 12.5
Density g/cm2 18.2
Technical informationApplications
Low oxidationAlloy corresponds to ISO 9693 standard
GEN
ERAL
AD
DITIO
NA
L INFO
RMATIO
N
ADDITIONAL INFORMATIONMATERIAL INFORMATION
12
Directives 93/42/EECAll production stages carried out by Institut Straumann AG are subject to the standards laid down in the EN ISO 9001 quality assurance system. This European standard establishes in detail the criteria which, in order to be recognized, a company must fulfill regarding comprehensive quality assurance during its manufacturing processes.
Medical products have to meet extremely strict requirements, and with good reason. These requirements are defined in the European standard ISO 13485, which we also fulfill. This ensures that the quality of our products and servicesmeets our customers‘ expectations and can be reproduced and traced at any time.
Straumann products with the CE mark fulfill the requirements of the Medical Device Directive 93/42 EEC.
Institut Straumann AG fulfills the stringent requirements of the European Directive 93/42/EEC for medical devices as well as the EN ISO 9001 and ISO 13485 standards.
GEN
ERAL
AD
DIT
ION
AL
INFO
RMAT
ION
ADDITIONAL INFORMATIONQUALITY AT THE CUSTOMER‘S SERVICE
13
AlgeriaTaourirt Dentaire SARL38, parc Ben Omar KoubaDZ-AlgerPhone: +213 2128 0132Fax: +213 2129 9910E-mail: [email protected]
ArgentinaSyncrotech SRLJerónimo Salguero 1575 3°pisoAR-1177 Buenos AiresPhone: +54 11 4511 9520Fax: +54 11 4511 9524E-mail: [email protected]
AustraliaStraumann Australia P/L7 Gateway CrtAU-Port Melbourne 3207, VictoriaPhone: +61 3 9646 7060Fax: +61 3 9646 7232Phone: 1800 660 330
(toll free for Australia)Phone: 0800 408 370
(toll free for New Zealand)E-mail: [email protected]
AustriaStraumann GmbHFlorido TowerFloridsdorfer Hauptstrasse 1AT-1210 ViennaPhone: +43 1 294 0660Fax: +43 1 294 0666E-mail: [email protected]
BahrainGulf PharmacyVilla 390, Rd. 3009, New Zinj 330P.O. Box 2576BH-ManamaPhone: +973 1723 9399Fax: +973 1723 2230E-mail: [email protected]
BelgiumStraumann NV/ SABelgicastraat 3/ Building 503BE-1930 ZaventemPhone: +32 2 790 1000Fax: +32 2 790 1020E-mail: [email protected]
BrazilStraumann Brasil LtdaRua Funchal 263 – 12° andarVila OlímpiaBR-04551-060 São Paulo (SP)Phone: +55 11 3058 6888Fax: +55 11 3058 6899E-mail: [email protected]
BulgariaUltradental Ltd.Kniaz Boris I St., No. 10, ground floorBG-1463 SofiaPhone: +359 2 953 3557Fax: +359 2 953 3559E-mail: [email protected]
CanadaStraumann Canada Ltd.3115 Harvester Road, Suite 100CA-Burlington, Ontario L7N 3N8Phone: +1 905 319 2900 Fax: +1 905 319 2911E-mail: [email protected]
ChileComercial Beys S.A. Calle del Arzobispo0643 ProvidenicaCL-29985 Santiago de ChilePhone: +56 2 7374 963Fax: +562 7772 644E-mail: [email protected]
ChinaStraumann (Beijing) Medical Device Consulting Co. Ltd. 11th floor, Tower B, Jiaming Centre 27#, Dongsanhuan Beilu Chaoyang District CN-Beijing 100020Phone: +86 10 5775 6555 Fax: +86 10 5775 6556 E-mail: [email protected]
ChinaBeijing Focus Medical Instrument Co. Ltd.6th floor, Fairyland Plaza83#, Fuxing Road, Haidian DistrictCN-Beijing 100856Phone: +86 10 8861 2668Fax: +86 10 8820 3991E-mail: [email protected]
ColombiaMagnetron Zona Franca S.AZona Franca del Eje CafeteroBodega 50CO-La Tebaida, QuindioPhone: +57 6 747 9857Fax: +57 6 315 7110E-mail: [email protected]
CroatiaSanitaria Dental d.o.o.Korculanska 4-6HR-1000 ZagrebPhone: +385 1618 1178Fax: +385 1618 3059E-mail: [email protected]
Czech RepublicStraumann s.r.o.Na Žertvách 2196/34CZ-180 00 Prague 8Phone: +420 2 8409 4650Fax: +420 2 8409 4659E-mail: [email protected]
DenmarkStraumann Danmark ApSNygårds Plads 21.1DK-2605 Brøndby Phone: +45 4616 0666 Fax: +45 4361 2581 E-mail: [email protected]
DenmarkFor Straumann® EmdogainLight HouseStaeremossen 56DK-3250 Gilleleje Phone: +45 48 28 56 46Fax: +45 48 28 60 16E-mail: [email protected]
FinlandStraumann OyFredrikinkatu 48 A 7 krsFI-00100 HelsinkiPhone: +358 9694 2877Fax: +358 9694 0695E-mail: [email protected]
GEN
ERAL
CO
NTA
CTS
CONTACTS
14
FranceStraumann S.à.r.l.3, rue de Galmy-ChessyFR-77701 Marne-la-Vallée, Cedex 4Phone: +33 1 6417 3000Fax: +33 1 6417 3010E-mail: [email protected]
GermanyStraumann GmbHJechtinger Strasse 9DE-79111 FreiburgPhone: +49 761 4501 0Fax: +49 761 4501 149E-mail: [email protected]
GreeceDenco Dental SA15 Mesogion AvenueGR-11526 AthensPhone: +30 210 777 0670Fax: +30 210 748 6002E-mail: [email protected]
Hong KongAdvance Dental ConsultingRoom 1303-05, Wing Kwok Centre182 Woo Sung StreetJordan, KowloonHK-Hong KongPhone: +852 2384 7666Fax: +852 2388 0960E-mail: [email protected]
HungaryStraumann GmbH Magyarországi FióktelepeM3 Business CenterHungária körút 179-187HU-1146 BudapestPhone: +36 1 787 1095Fax: +36 1 787 1096E-mail: [email protected]
IcelandE. Bridde ehfHoltasmári 1 (7th Floor)IS-201 KópavogurPhone: +354 577 1215Fax: +354 577 1216E-mail: [email protected]
IndonesiaFondacoAPL Tower, Podomoro City27th Floor, Suite 2Jl. Letjen S. Parman Kav. 28Grogol PetamburanID-Jakarta Barat 11470Phone: +62 21 2903 4388Fax: +62 21 2903 4391E-mail: [email protected]
IranMehrarabon Co. - NorouziNo. 1, 1st Floor, Block AKaveh Bldg., Azadi Ave.IR-1313654913 TeheranPhone: +98 21 6643 5999Fax: +98 21 6642 2908E-mail: [email protected]
IsraelDentorient Fuss28, Hagdud Haivri StreetP.O. Box 2232IL-Tel Aviv 61021Phone: +972 3 6393640Fax: +972 3 6393645E-mail: [email protected]
IsraelFor regenerative productsH.A. Systems Ltd.Tuval StreetIL-52522 Ramat-GanPhone: +972 3 6138777Fax: +972 3 6138778E-mail: [email protected]
ItalyStraumann Italia srlViale Bodio 37IT-20158 MilanoPhone: +39 02 3932 831Fax: +39 02 3932 8365E-mail: [email protected]
JapanFor Straumann® Dental Implant System and CARES® Digital SolutionsStraumann Japan K.K.Sapia Tower 16F1-7-12 Marunouchi, Chiyoda-kuJP-Tokyo 100-0005Phone: +81 3 5218 2600Fax: +81 3 5218 2601E-mail: [email protected]
JordanArab Medical & Scientific Alliance A.M.S.A.P.O. Box 2509, 11953 Tela’ Al-AliJO-AmmanPhone: +962 6 552 8009Fax: +962 6 553 2358E-mail: [email protected]
KuwaitAlphaMedical Co.Bneid Al-Qar, Block 6 - St. 63Bldg. 15 Floor 13P.O. Box 6267KW-22073 SalmiyaPhone: +965 2 247 8612Fax: +965 2 247 8613E-mail: [email protected]
LebanonProdent s.a.l.Corniche al Nahr, Victoria Tower Bldg.P.O. Box 165 8841100 2080 AshrafiehLB-BeirutPhone: +961 1 425 042Fax: +961 1 424 642E-mail: [email protected]
LithuaniaJSC “MED GRUPE”Polocko St. 21 / Zvirgzdyno g. 1LT-01205 VilniusPhone: +370 5 276 1377Fax: +370 5 275 6850E-mail: [email protected]
MacedoniaDentomed-M Ltd.Bojmija St. 2/2, P.O. BoxMK-1000 SkopjePhone: +389 2 2462 739Fax: +389 2 2462 781E-mail: [email protected]
MalaysiaTitleray Dental Implantsc/o Ricerfarma Marketing (M) Sdn BhdA-5-28, Penthouse SuiteIOI Boulevard, Jalan Kenari 5Bandar Puchong JayaMY-47170 Puchong, Selangor DEPhone: +60 3 8075 4644Fax: +60 3 8075 0995E-mail: [email protected]
GEN
ERAL
CO
NTA
CTSCONTACTS
15
MaltaBart Enterprises Ltd.42A, Main StreetMT-Balzan BZN 06Phone: +356 2144 7340Fax: +356 2144 7341E-mail: [email protected]
MexicoStraumann México SA de CVRubén Dario #281 int. 1702 Piso 17Col. Bosque de ChapultepecMX-11580 México, D.F.Phone: +52 55 5282 6262Fax: +52 55 5282 6289E-mail: [email protected]
MoroccoSociété Academy3, rue Tabit Bnou Korra, (Avenue Driss 1er)Quartier des HôpitauxMA-20360 CasablancaPhone: +212 5 377 05 027Fax: +212 5 377 05 066E-mail: [email protected]
NetherlandsStraumann BVEinsteinweg 15NL-3404 LE IJsselsteinPhone: +31 30 604 6611Fax: +31 30 604 6728E-mail: [email protected]
NorwayStraumann ASNedre Vollgate 3P.O. Box 1751 VikaNO-0122 OsloPhone: +47 2335 4488Fax: +47 2335 4480E-mail: [email protected]
OmanIbn Sina Medical Supply LLCP.O. Box 481, Mina Al FahalOM-116 Sultanate of OmanPhone: +968 2450 1836Fax: +968 2450 2840E-mail: [email protected]
PakistanAhmad Enterprises7-B New Muslim TownPK-Lahore, PunjabPhone: +92 42 586 6975Fax: +92 42 586 0945E-mail: [email protected]
PhilippinesEuro Asia Specialty Dental Corporation39th Floor, Summit One Office Tower530 Shaw Blvd.PH-Mandaluyong City 1550Phone: +63 2 533 1300Fax: +63 2 533 1300 + 3E-mail: [email protected]
PolandSchlamberger Sp. z o.o.Ul. Grzybowska 4/246PL-00-131 WarsawPhone: +48 513 046 966Fax: +48 85 730 86 22E-mail: [email protected]
PortugalStraumann S.A.Lagoas Park, Edificio 11, Piso 3PT-2740-244 Porto SalvoPhone: +351 21 422 9170Fax: +351 21 421 2144E-mail: [email protected]
QatarAli Bin Ali Medical P.O. Box 75 Bin Omran AreaQA-DohaPhone: +974 4 486 3457Fax: +974 4 488 2585E-mail: [email protected]
RomaniaImplant Division s.r.l.Calea Rahovei nr. 266-268Corp 63, etaj 6, camera 1RO-050674 BucharestTel.: +40 727 735 534E-mail: ruxandra.popescu@
implantdivision.com
RussiaOOO “Straumann”Leninsky Prospekt, 119A,RU-119 571 MoscowPhone: +7 495 139 7474Fax: +7 495 139 7475E-mail: [email protected]
Saudi ArabiaThimar Al Jazirah56 Prince Fawaz Bin Abdul Aziz St.Malaz Dist.SA-11421 RiyadhPhone: +966 1 445 4545Fax: +966 1 493 4568E-mail: [email protected]
SerbiaSwissdent dooVojvode Stepe 129YU-11000 BeogradTel.: +381 11 396 2111Fax +381 11 396 2444E-mail: [email protected]
SingaporeImplant FocusNo. 6 Ubi Road 1#03-01Wintech CentreSG-Singapore 408726Phone: +65 6741 5411Fax: +65 6742 3593E-mail: [email protected]
SloveniaDentalia d.o.o.Celovska 197SI-1000 LjublianaPhone: +386 1 583 7730Fax: +386 1 510 3215E-mail: [email protected]
South AfricaASM Consultants (Pty) Ltd.PO Box 1453Parklands 2121ZA-JohannesburgPhone: +27 11 447 1511Fax: +27 11 880 8694E-mail: [email protected]
GEN
ERAL
CO
NTA
CTS
CONTACTS
16
South KoreaStraumann Dental Korea Inc.1005 Korea Trade TowerSamseong 1-dongGangnam-guKR-Seoul 135-729Phone: +82 2 2149 3800Fax: +82 2 2149 3810E-mail: [email protected]
SpainStraumann S.A.Edificio Arroyo AAvda. Bruselas, 38ES-28108 Alcobendas - MadridPhone: +34 91 344 7700 Fax: +34 91 344 9517E-mail: [email protected]
SwedenStraumann ABFabriksgatan 13SE-41250 GothenburgPhone: +46 31 708 7500Fax: +46 31 708 7529E-mail: [email protected]
SwitzerlandInstitut Straumann AGPeter Merian-Weg 12CH-4002 BaselPhone: +41 61 965 1111Fax: +41 61 965 1101E-mail: [email protected]
TaiwanKingcraft Scientific Inc.13F-1, No. 356, Sec. 5Nanking E. Rd.TW-10569 TaipeiPhone: +886 2 2742 2772Fax: +886 2 2748 6267E-mail: [email protected]
ThailandDKSH (Thailand) Limited280 New RoadTH-Bangkok 10100Phone: +66 2220 9000Fax: +66 2225 8992E-mail: [email protected]
TunisiaRecta MedicaRésidence El Yamama, Blc B, 2ème étageApp. no. 23, El Manar ITN-2092 TunisPhone: +216 71 871 960Fax: +216 71 885 214E-mail: [email protected]
TurkeyBati DentalAksu Sokak No. 9/18-19SihhiyeTR-06410 AnkaraPhone: +90 312 434 2000Fax: +90 312 434 2042E-mail: [email protected]
UkraineINSPE42, Br. Mikhnovskykh St.UA-79018 LvivPhone: +38 32 240 3705Fax: +38 32 294 8399E-mail: [email protected]
United Arab EmiratesAl-Hayat Pharmaceuticals U.A.E.Al Whada StreetP.O. Box 4483AE-SharjahPhone: +971 6 559 2481Fax: +971 6 559 3573E-mail: [email protected]
United KingdomStraumann Ltd.3 Pegasus PlaceGatwick RoadGB-Crawley RH10 9AY, West SussexPhone: +44 1293 65 1230Fax: +44 1293 65 1239E-mail: [email protected]
UruguaySyncrotech S.A.Avenida Brasil 2483Oficina 702Esq. ObligadoUY-11300 MontevideoPhone: +598 2 708 3236E-mail: [email protected]
USAStraumann USA LLC60 Minuteman RoadUS-Andover, MA 01810Phone: +1 978 747 2500Fax: +1 978 747 2490E-mail: [email protected]
VietnamDKSH Vietnam Co. Ltd.2nd Floor, Etown 2 Building364 Cong Hoa StreetTan Binh DistrictVN-Ho Chi Minh CityPhone: +84 8 3812 5848Fax: +84 8 3812 5778
International HeadquartersInstitut Straumann AG Peter Merian-Weg 12CH-4002 Basel, SwitzerlandPhone: +41 (0)61 965 11 11Fax: +41 (0)61 965 11 01E-mail: [email protected]
GEN
ERAL
CO
NTA
CTSCONTACTS
17
!
REG
ENER
ATI
ON
REGENERATION
REG
ENER
ATI
ON
Straumann® Emdogain and Straumann® PrefGel 20Straumann® BoneCeramic 21Straumann® Bone Block Fixation 1.5 mm 22
REG
ENER
ATIO
NSTRAUMANN
® EMDOGAIN AND STRAUMANN® PrefGel
20
STRAUMANN® EMDOGAIN AND STRAUMANN® PrefGel
Art. No. Article
075.098 Straumann® Emdogain 0.15 mlcontains:5 x Straumann® Emdogain 0.15 ml
075.101 Straumann® Emdogain 0.3 mlcontains:1 x Straumann® Emdogain 0.3 ml
075.102 Straumann® Emdogain 0.7 mlcontains:1 x Straumann® Emdogain 0.7 ml
075.114 Straumann® Emdogain 0.3 mlmultipack incl. Straumann® PrefGelcontains:3 x Straumann® Emdogain 0.3 ml,3 x Straumann® PrefGel 0.6 ml ready-to-use syringe
075.116 Straumann® Emdogain 0.7 mlmultipack incl. Straumann® PrefGelcontains:3 x Straumann® Emdogain 0.7 ml,3 x Straumann® PrefGel 0.6 ml ready-to-use syringe
075.117 Straumann® Emdogain PLUSincl. Straumann® PrefGel and Straumann® BoneCeramiccontains:1 x Straumann® Emdogain 0.7 ml,1 x Straumann® BoneCeramic 400–700, 0.25 g,1 x Straumann® PrefGel 0.6 ml ready-to-use syringe
075.203 Straumann® PrefGel 0.6 mlcontains:5 x Straumann® PrefGel 0.6 ml ready-to-use syringe
Ordering and delivery of Straumann® Emdogain and Straumann® Emdogain PLUSThe certified quality assurance system for this medical product, which applies to both production and logistics,stipulates that it must be kept in refrigerated storage (at 2 °C–8 °C). Please place in the fridge immediately uponarrival.
For this reason, Straumann has special delivery arrangements. Please contact your local distributor for details.
Ordering and delivery of Straumann® PrefGelStraumann® PrefGel must be kept in refrigerated storage (at 2 °C–8 °C). Interruption of refrigeration, e.g. duringtransportation, is permissible. The package should, however, be placed in the refrigerator as soon as possible.
The normal terms of delivery apply for Straumann® PrefGel.
The right of return does not apply to Straumann® Emdogain, Straumann® Emdogain PLUS or Straumann® PrefGel.
REG
ENER
ATI
ON
STRA
UM
AN
N® B
oneC
eram
ic
21
STRAUMANN® BoneCeramic
Art. No. Article Dimensions
070.203 Straumann® BoneCeramic400–700
Granule size: 400–700 µm,Unit size: 0.25 g,Volume: approx. 0.3 ml
070.204 Straumann® BoneCeramic500–1000
Granule size: 500–1000 µm,Unit size: 0.5 g,Volume: approx. 0.95 ml
070.205 Straumann® BoneCeramic500–1000
Granule size: 500–1000 µm,Unit size: 1 g,Volume: approx. 1.9 ml
REG
ENER
ATIO
NSTRAUM
ANN® BO
NE BLOCK FIXATIO
N 1.5 mm
22
STRAUMANN® BONE BLOCK FIXATION 1.5 mm
Art. No. Article Dimensions Material
Basic set
041.032 Straumann® Bone BlockFixationcassette for drills, mini-screws and screwdriver forbone block fixation
Length 130 mm,Width 118 mm,Height 25 mm
Thermoplastic
044.125 Glide hole drill Length 37 mm,Stop 20 mm,Ø 1.5 mm
Stainlesssteel
044.126 Residual ridge drill Length 37 mm,Stop 16 mm,Ø 1.25 mm
Stainlesssteel
042.700V5 Crosshead mini-screw Length 8 mm,Ø 1.5 mm
Ti
042.701V5 Crosshead mini-screw Length 10 mm,Ø 1.5 mm
Ti
042.702V5 Crosshead mini-screw Length 12 mm,Ø 1.5 mm
Ti
042.703V5 Crosshead mini-screw Length 14 mm,Ø 1.5 mm
Ti
040.360 Screwdrivercomplete, with screwdriverblade and screw-holdingdevice for implant screws,crosshead Ø 1.5 mm
Length 160 mm Al/Stainlesssteel
Spare parts
046.256 Screwdriver bladefor implant screws,crosspoint Ø 1.5 mm
Length 69 mm Stainlesssteel
046.257 Screw-holding devicefor screwdriver blade046.256
Length 45 mm Stainlesssteel
046.258 Screwdriver handlefor screwdriver blade046.256
Length 100 mm Al/Stainlesssteel
SURG
ERY
SURGERY
SURG
ERY
Implants� Overview titanium implants 24� Overview Roxolid® Implants 26� Standard implants 27� Standard Plus implants 33� Tapered Effect implants 42� Bone Level implants 47� TempImplants 55Surgical instruments� Surgical planning aids 56� Implant bed preparation instruments 58� Auxiliary instruments 66� Surgical cassette 68� Osteotomes 69� Explantation 72Straumann® CARES® Guided Surgery� coDiagnostiX™ 75� gonyX™ 76� Guided Surgery instruments 78� Auxiliary instruments 82� Guided Surgery Cassette 84
Standard Implants RN RN RN WNØ 4.8 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm
SLActive® S Ø 3.3 RN S Ø 4.1 RN S Ø 4.8 RN S Ø 4.8 WN 6 mm – 033.030S 033.230S 033.630S 8 mm 033.131S 033.031S* 033.231S 033.631S 10 mm 033.132S 033.032S* 033.232S 033.632S 12 mm 033.133S 033.033S* 033.233S 033.633S 14 mm 033.134S 033.034S 033.234S – 16 mm 033.135S 033.035S – –
2.8 mm
Standard Plus Implants NN RN RN RN WNØ 3.5 mm Ø 4.8 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm
SLActive® SP Ø 3.3 NN SP Ø 3.3 RN SP Ø 4.1 RN SP Ø 4.8 RN SP Ø 4.8 WN 6 mm – 033.050S 033.250S 033.650S 8 mm 033.951S 033.151S 033.051S* 033.251S* 033.651S 10 mm 033.952S 033.152S 033.052S* 033.252S* 033.652S 12 mm 033.953S 033.153S 033.053S* 033.253S* 033.653S 14 mm 033.954S 033.154S 033.054S 033.254S –
1.8 mm
Tapered Effect Implants RN RN WNØ 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm
SLActive® TE Ø 3.3 RN TE Ø 4.1 RN TE Ø 4.8 WN 8 mm 033.721S 033.761S* – 10 mm 033.722S 033.762S* 033.712S 12 mm 033.723S 033.763S* 033.713S 14 mm 033.724S 033.764S 033.714S
1.8 mm
Bone Level Implants NC RC RCØ 3.3 mm Ø 4.1 mm Ø 4.8 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm
SLActive® BL Ø 3.3 NC BL Ø 4.1 RC BL Ø 4.8 RC 8 mm 021.2108* 021.4108* 021.6108* 10 mm 021.2110* 021.4110* 021.6110* 12 mm 021.2112* 021.4112* 021.6112* 14 mm 021.2114 021.4114 021.6114
* Implant available as guided implant. For details, see implant list p. 28 ff.
SURG
ERY
OVERVIEW
TITAN
IUM
IMPLA
NTS
OVERVIEW TITANIUM IMPLANTSSLActive® IMPLANTS
24
Standard Implants RN RN RN WNØ 4.8 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm
SLA® S Ø 3.3 RN S Ø 4.1 RN S Ø 4.8 RN S Ø 4.8 WN 6 mm – 043.030S 043.230S 043.630S 8 mm 043.131S 043.031S 043.231S 043.631S 10 mm 043.132S 043.032S 043.232S 043.632S 12 mm 043.133S 043.033S 043.233S 043.633S 14 mm 043.134S 043.034S 043.234S – 16 mm 043.135S 043.035S – –
2.8 mm
Standard Plus Implants NN RN RN RN WNØ 3.5 mm Ø 4.8 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm
SLA® SP Ø 3.3 NN SP Ø 3.3 RN SP Ø 4.1 RN SP Ø 4.8 RN SP Ø 4.8 WN 6 mm – – 043.050S 043.250S 043.650S 8 mm 042.930S 043.151S 043.051S 043.251S 043.651S 10 mm 042.931S 043.152S 043.052S 043.252S 043.652S 12 mm 042.932S 043.153S 043.053S 043.253S 043.653S 14 mm 042.933S 043.154S 043.054S 043.254S –
1.8 mm
Tapered Effect Implants RN RN WNØ 4.8 mm Ø 4.8 mm Ø 6.5 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm
SLA® TE Ø 3.3 RN TE Ø 4.1 RN TE Ø 4.8 WN 8 mm 043.721S 043.761S – 10 mm 043.722S 043.762S 043.712S 12 mm 043.723S 043.763S 043.713S 14 mm 043.724S 043.764S 043.714S
1.8 mm
Bone Level Implants NC RC RCØ 3.3 mm Ø 4.1 mm Ø 4.8 mm
Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm
SLA® BL Ø 3.3 NC BL Ø 4.1 RC BL Ø 4.8 RC 8 mm 021.2408 021.4408 021.6408 10 mm 021.2410 021.4410 021.6410 12 mm 021.2412 021.4412 021.6412 14 mm 021.2414 021.4414 021.6414
SURG
ERY
OVE
RVIE
W T
ITA
NIU
M IM
PLA
NTS
OVERVIEW TITANIUM IMPLANTSSLA® IMPLANTS
25
Standard Implants RNØ 4.8 mm
Ø 3.3 mm
SLActive® S Ø 3.3 RN 8 mm 033.431S* 10 mm 033.432S* 12 mm 033.433S* 14 mm 033.434S 16 mm 033.435S
2.8 mm
Standard Plus Implants NNC RNØ 3.5 mm Ø 4.8 mm
Ø 3.3 mm Ø 3.3 mm
SLActive® SP Ø 3.3 NNC SP Ø 3.3 RN 8 mm 033.416S 033.451S* 10 mm 033.417S 033.452S* 12 mm 033.418S 033.453S* 14 mm 033.419S 033.454S
1.8 mm
Tapered Effect Implants RNØ 4.8 mm
Ø 3.3 mm
SLActive® TE Ø 3.3 RN 8 mm 033.751S 10 mm 033.752S 12 mm 033.753S 14 mm 033.754S
1.8 mm
Bone Level Implants NCØ 3.3 mm
Ø 3.3 mm
SLActive® BL Ø 3.3 NC 8 mm 021.2208 10 mm 021.2210 12 mm 021.2212 14 mm 021.2214
* Implant available as guided implant. For details, see implant list p. 28 ff.
SURG
ERY
OVERVIEW
ROXO
LID® IM
PLAN
TS
OVERVIEW ROXOLID® IMPLANTSSLActive® IMPLANTS
26
SURG
ERY
STA
ND
ARD
IMPL
AN
TS Ø
3.3
mm
27
STANDARD IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.131S Standard implant SLActive® 8 mm Ti
033.132S Standard implant SLActive® 10 mm Ti
033.133S Standard implant SLActive® 12 mm Ti
033.134S Standard implant SLActive® 14 mm Ti
033.135S Standard implant SLActive® 16 mm Ti
SLA®
043.131S Standard implant SLA® 8 mm Ti
043.132S Standard implant SLA® 10 mm Ti
043.133S Standard implant SLA® 12 mm Ti
043.134S Standard implant SLA® 14 mm Ti
043.135S Standard implant SLA® 16 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
SURG
ERY
STANDARD RO
XOLID
® IMPLAN
TS Ø 3.3 mm
28
STANDARD ROXOLID® IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.431S Standard implant SLActive® 8 mm TiZr
033.432S Standard implant SLActive® 10 mm TiZr
033.433S Standard implant SLActive® 12 mm TiZr
033.434S Standard implant SLActive® 14 mm TiZr
033.435S Standard implant SLActive® 16 mm TiZr
SLActive®, guided
033.431G Standard implantguided
SLActive® 8 mm TiZr
033.432G Standard implantguided
SLActive® 10 mm TiZr
033.433G Standard implantguided
SLActive® 12 mm TiZr
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
SURG
ERY
STA
ND
ARD
IMPL
AN
TS Ø
4.1
mm
29
STANDARD IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.030S Standard implant SLActive® 6 mm Ti
033.031S Standard implant SLActive® 8 mm Ti
033.032S Standard implant SLActive® 10 mm Ti
033.033S Standard implant SLActive® 12 mm Ti
033.034S Standard implant SLActive® 14 mm Ti
033.035S Standard implant SLActive® 16 mm Ti
SLA®
043.030S Standard implant SLA® 6 mm Ti
043.031S Standard implant SLA® 8 mm Ti
043.032S Standard implant SLA® 10 mm Ti
043.033S Standard implant SLA® 12 mm Ti
043.034S Standard implant SLA® 14 mm Ti
043.035S Standard implant SLA® 16 mm Ti
SLActive®, guided
033.031G Standard implantguided
SLActive® 8 mm Ti
033.032G Standard implantguided
SLActive® 10 mm Ti
033.033G Standard implantguided
SLActive® 12 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
STAN
DA
RD IM
PLAN
TS Ø 4
.1 m
m
30
STANDARD IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
SURG
ERY
STA
ND
ARD
IMPL
AN
TS Ø
4.8
mm
31
STANDARD IMPLANTS Ø 4.8 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.230S Standard implant SLActive® 6 mm Ti
033.231S Standard implant SLActive® 8 mm Ti
033.232S Standard implant SLActive® 10 mm Ti
033.233S Standard implant SLActive® 12 mm Ti
033.234S Standard implant SLActive® 14 mm Ti
SLA®
043.230S Standard implant SLA® 6 mm Ti
043.231S Standard implant SLA® 8 mm Ti
043.232S Standard implant SLA® 10 mm Ti
043.233S Standard implant SLA® 12 mm Ti
043.234S Standard implant SLA® 14 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
SURG
ERY
STAN
DA
RD IM
PLAN
TS Ø 4
.8 m
m
32
STANDARD IMPLANTS Ø 4.8 mmWIDE NECK Ø 6.5 mm
Art. No. Article Dimensions Material
SLActive®
033.630S Standard implant SLActive® 6 mm Ti
033.631S Standard implant SLActive® 8 mm Ti
033.632S Standard implant SLActive® 10 mm Ti
033.633S Standard implant SLActive® 12 mm Ti
SLA®
043.630S Standard implant SLA® 6 mm Ti
043.631S Standard implant SLA® 8 mm Ti
043.632S Standard implant SLA® 10 mm Ti
043.633S Standard implant SLA® 12 mm Ti
Closure screws and healing caps
048.375 WN Closure screw Ti
048.375S Sterile WN Closure screw Ti
048.030 WN Healing caplabial bevel
Height 2 mm Ti
048.030S Sterile WN Healing caplabial bevel
Height 2 mm Ti
048.038 WN Healing cap Height 2 mm Ti
048.038S Sterile WN Healing cap Height 2 mm Ti
048.039 WN Healing cap Height 3 mm Ti
048.039S Sterile WN Healing cap Height 3 mm Ti
048.053 WN Healing cap Height 4.5 mm Ti
048.053S Sterile WN Healing cap Height 4.5 mm Ti
SURG
ERY
STAN
DARD
PLU
S IM
PLAN
TS Ø
3.3
mm
33
STANDARD PLUS IMPLANTS Ø 3.3 mmNARROW NECK CrossFit® Ø 3.5 mm
Art. No. Article Dimensions Material
SLActive®
033.416S Standard Plus Implant SLActive® 8 mm TiZr
033.417S Standard Plus Implant SLActive® 10 mm TiZr
033.418S Standard Plus Implant SLActive® 12 mm TiZr
033.419S Standard Plus Implant SLActive® 14 mm TiZr
Closure screws and healing caps
048.324048.324V4
NNC Closure screw Height 0 mm Ti
048.324S Sterile NNC Closurescrew
Height 0 mm Ti
048.325048.325V4
NNC Closure screw Height 1.5 mm Ti
048.325S Sterile NNC Closurescrew
Height 1.5 mm Ti
048.071 NNC Healing capreduced height
Height 3 mm Ti
048.071S Sterile NNC Healing capreduced height
Height 3 mm Ti
048.074 NNC Healing capregular height
Height 4.5 mm Ti
048.074S Sterile NNC Healing capregular height
Height 4.5 mm Ti
048.082 NNC Healing caplabial bevel
Height 2 mm Ti
048.082S Sterile NNC Healing caplabial bevel
Height 2 mm Ti
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
SURG
ERY
STANDARD PLUS IM
PLANTS Ø
3.3 mm
34
STANDARD PLUS IMPLANTS Ø 3.3 mmNARROW NECK Ø 3.5 mm
Art. No. Article Dimensions Material
SLActive®
033.951S Standard Plus implant SLActive® 8 mm Ti
033.952S Standard Plus implant SLActive® 10 mm Ti
033.953S Standard Plus implant SLActive® 12 mm Ti
033.954S Standard Plus implant SLActive® 14 mm Ti
SLA®
042.930S Standard Plus implant SLA® 8 mm Ti
042.931S Standard Plus implant SLA® 10 mm Ti
042.932S Standard Plus implant SLA® 12 mm Ti
042.933S Standard Plus implant SLA® 14 mm Ti
Healing and protective caps
048.043 NN Healing capwith integral occlusalscrew
Height 3.4 mm Ti/Ti alloy
048.374 NN Closure screwwith hex socket*
Height 1.8 mm Ti
048.050 NN Protective capwith integral occlusalscrew
Height 3.4 mm PEEK/TAN
* = Requires hexagonal screwdriver, Art. No. 046.421
SURG
ERY
STAN
DARD
PLU
S IM
PLAN
TS Ø
3.3
mm
35
STANDARD PLUS IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.151S Standard Plus implant SLActive® 8 mm Ti
033.152S Standard Plus implant SLActive® 10 mm Ti
033.153S Standard Plus implant SLActive® 12 mm Ti
033.154S Standard Plus implant SLActive® 14 mm Ti
SLA®
043.151S Standard Plus implant SLA® 8 mm Ti
043.152S Standard Plus implant SLA® 10 mm Ti
043.153S Standard Plus implant SLA® 12 mm Ti
043.154S Standard Plus implant SLA® 14 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
STANDARD PLUS ROXOLID® IM
PLANTS Ø 3.3 mm
36
STANDARD PLUS ROXOLID® IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.451S Standard Plus implant SLActive® 8 mm TiZr
033.452S Standard Plus implant SLActive® 10 mm TiZr
033.453S Standard Plus implant SLActive® 12 mm TiZr
033.454S Standard Plus implant SLActive® 14 mm TiZr
SLActive®, guided
033.451G Standard Plus implantguided
SLActive® 8 mm TiZr
033.452G Standard Plus implantguided
SLActive® 10 mm TiZr
033.453G Standard Plus implantguided
SLActive® 12 mm TiZr
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
STAN
DARD
PLU
S IM
PLAN
TS Ø
4.1
mm
37
STANDARD PLUS IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.050S Standard Plus implant SLActive® 6 mm Ti
033.051S Standard Plus implant SLActive® 8 mm Ti
033.052S Standard Plus implant SLActive® 10 mm Ti
033.053S Standard Plus implant SLActive® 12 mm Ti
033.054S Standard Plus implant SLActive® 14 mm Ti
SLA®
043.050S Standard Plus implant SLA® 6 mm Ti
043.051S Standard Plus implant SLA® 8 mm Ti
043.052S Standard Plus implant SLA® 10 mm Ti
043.053S Standard Plus implant SLA® 12 mm Ti
043.054S Standard Plus implant SLA® 14 mm Ti
SLActive®, guided
033.051G Standard Plus implantguided
SLActive® 8 mm Ti
033.052G Standard Plus implantguided
SLActive® 10 mm Ti
033.053G Standard Plus implantguided
SLActive® 12 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
SURG
ERY
STANDARD PLUS IM
PLANTS Ø
4.1 mm
38
STANDARD PLUS IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
STAN
DARD
PLU
S IM
PLAN
TS Ø
4.8
mm
39
STANDARD PLUS IMPLANTS Ø 4.8 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.250S Standard Plus implant SLActive® 6 mm Ti
033.251S Standard Plus implant SLActive® 8 mm Ti
033.252S Standard Plus implant SLActive® 10 mm Ti
033.253S Standard Plus implant SLActive® 12 mm Ti
033.254S Standard Plus implant SLActive® 14 mm Ti
SLA®
043.250S Standard Plus implant SLA® 6 mm Ti
043.251S Standard Plus implant SLA® 8 mm Ti
043.252S Standard Plus implant SLA® 10 mm Ti
043.253S Standard Plus implant SLA® 12 mm Ti
043.254S Standard Plus implant SLA® 14 mm Ti
SLActive®, guided
033.251G Standard Plus implantguided
SLActive® 8 mm Ti
033.252G Standard Plus implantguided
SLActive® 10 mm Ti
033.253G Standard Plus implantguided
SLActive® 12 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
SURG
ERY
STANDARD PLUS IM
PLANTS Ø
4.8 mm
40
STANDARD PLUS IMPLANTS Ø 4.8 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
STAN
DARD
PLU
S IM
PLAN
TS Ø
4.8
mm
41
STANDARD PLUS IMPLANTS Ø 4.8 mmWIDE NECK Ø 6.5 mm
Art. No. Article Dimensions Material
SLActive®
033.650S Standard Plus implant SLActive® 6 mm Ti
033.651S Standard Plus implant SLActive® 8 mm Ti
033.652S Standard Plus implant SLActive® 10 mm Ti
033.653S Standard Plus implant SLActive® 12 mm Ti
SLA®
043.650S Standard Plus implant SLA® 6 mm Ti
043.651S Standard Plus implant SLA® 8 mm Ti
043.652S Standard Plus implant SLA® 10 mm Ti
043.653S Standard Plus implant SLA® 12 mm Ti
Closure screws and healing caps
048.375 WN Closure screw Ti
048.375S Sterile WN Closure screw Ti
048.030 WN Healing caplabial bevel
Height 2 mm Ti
048.030S Sterile WN Healing caplabial bevel
Height 2 mm Ti
048.038 WN Healing cap Height 2 mm Ti
048.038S Sterile WN Healing cap Height 2 mm Ti
048.039 WN Healing cap Height 3 mm Ti
048.039S Sterile WN Healing cap Height 3 mm Ti
048.053 WN Healing cap Height 4.5 mm Ti
048.053S Sterile WN Healing cap Height 4.5 mm Ti
SURG
ERY
TAPERED
EFFECT IM
PLAN
TSØ
3.3
mm
42
TAPERED EFFECT IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.721S Tapered Effect implant SLActive® 8 mm Ti
033.722S Tapered Effect implant SLActive® 10 mm Ti
033.723S Tapered Effect implant SLActive® 12 mm Ti
033.724S Tapered Effect implant SLActive® 14 mm Ti
SLA®
043.721S Tapered Effect implant SLA® 8 mm Ti
043.722S Tapered Effect implant SLA® 10 mm Ti
043.723S Tapered Effect implant SLA® 12 mm Ti
043.724S Tapered Effect implant SLA® 14 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
TAPE
RED
EFF
ECT
ROXO
LID®
IMPL
AN
TS Ø
3.3
mm
43
TAPERED EFFECT ROXOLID® IMPLANTS Ø 3.3 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.751S Tapered Effect implant SLActive® 8 mm TiZr
033.752S Tapered Effect implant SLActive® 10 mm TiZr
033.753S Tapered Effect implant SLActive® 12 mm TiZr
033.754S Tapered Effect implant SLActive® 14 mm TiZr
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
TAPERED
EFFECT IM
PLAN
TSØ
4.1
mm
44
TAPERED EFFECT IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
SLActive®
033.761S Tapered Effect implant SLActive® 8 mm Ti
033.762S Tapered Effect implant SLActive® 10 mm Ti
033.763S Tapered Effect implant SLActive® 12 mm Ti
033.764S Tapered Effect implant SLActive® 14 mm Ti
SLA®
043.761S Tapered Effect implant SLA® 8 mm Ti
043.762S Tapered Effect implant SLA® 10 mm Ti
043.763S Tapered Effect implant SLA® 12 mm Ti
043.764S Tapered Effect implant SLA® 14 mm Ti
SLActive®, guided
033.761G Tapered Effect implantguided
SLActive® 8 mm Ti
033.762G Tapered Effect implantguided
SLActive® 10 mm Ti
033.763G Tapered Effect implantguided
SLActive® 12 mm Ti
Closure screws and healing caps
048.371048.371V4
RN Closure screwsmall
Ti
048.371S Sterile RN Closure screwsmall
Ti
048.373048.373V4
RN Closure screwlarge
Height 1.5 mm Ti
048.373S Sterile RN Closure screwlarge
Height 1.5 mm Ti
048.033 RN Healing cap Height 2 mm Ti
048.033S Sterile RN Healing cap Height 2 mm Ti
048.034 RN Healing cap Height 3 mm Ti
048.034S Sterile RN Healing cap Height 3 mm Ti
SURG
ERY
TAPE
RED
EFF
ECT
IMPL
AN
TSØ
4.1
mm
45
TAPERED EFFECT IMPLANTS Ø 4.1 mmREGULAR NECK Ø 4.8 mm
Art. No. Article Dimensions Material
048.037 RN Healing cap Height 4.5 mm Ti
048.037S Sterile RN Healing cap Height 4.5 mm Ti
048.028 RN Healing caplabial bevel, small
Height 2 mm Ti
048.028S Sterile RN Healing caplabial bevel, small
Height 2 mm Ti
048.029 RN Healing caplabial bevel, large
Height 3.5 mm Ti
048.029S Sterile RN Healing caplabial bevel, large
Height 3.5 mm Ti
SURG
ERY
TAPERED
EFFECT IM
PLAN
TSØ
4.8
mm
46
TAPERED EFFECT IMPLANTS Ø 4.8 mmWIDE NECK Ø 6.5 mm
Art. No. Article Dimensions Material
SLActive®
033.712S Tapered Effect implant SLActive® 10 mm Ti
033.713S Tapered Effect implant SLActive® 12 mm Ti
033.714S Tapered Effect implant SLActive® 14 mm Ti
SLA®
043.712S Tapered Effect implant SLA® 10 mm Ti
043.713S Tapered Effect implant SLA® 12 mm Ti
043.714S Tapered Effect implant SLA® 14 mm Ti
Closure screws and healing caps
048.375 WN Closure screw Ti
048.375S Sterile WN Closure screw Ti
048.030 WN Healing caplabial bevel
Height 2 mm Ti
048.030S Sterile WN Healing caplabial bevel
Height 2 mm Ti
048.038 WN Healing cap Height 2 mm Ti
048.038S Sterile WN Healing cap Height 2 mm Ti
048.039 WN Healing cap Height 3 mm Ti
048.039S Sterile WN Healing cap Height 3 mm Ti
048.053 WN Healing cap Height 4.5 mm Ti
048.053S Sterile WN Healing cap Height 4.5 mm Ti
SURG
ERY
BON
E LE
VEL
IMPL
AN
TS Ø
3.3
mm
47
BONE LEVEL IMPLANTS Ø 3.3 mmNARROW CrossFit®
Art. No. Article Dimensions Material
SLActive®
021.2108 Bone Level implant SLActive® 8 mm Ti
021.2110 Bone Level implant SLActive® 10 mm Ti
021.2112 Bone Level implant SLActive® 12 mm Ti
021.2114 Bone Level implant SLActive® 14 mm Ti
SLA®
021.2408 Bone Level implant SLA® 8 mm Ti
021.2410 Bone Level implant SLA® 10 mm Ti
021.2412 Bone Level implant SLA® 12 mm Ti
021.2414 Bone Level implant SLA® 14 mm Ti
Closure screws and healing abutments
024.2100-04 NC Closure screw* Height 0 mm Ti
024.2100S Sterile NC Closure screw Height 0 mm Ti
024.2105-04 NC Closure screw* Height 0.5 mm Ti
024.2105S Sterile NC Closure screw Height 0.5 mm Ti
024.2222 NC Healing abutmentconical shape
Height 2 mm,Ø 3.6 mm
Ti
024.2222S Sterile NC Healingabutmentconical
Height 2 mm,Ø 3.6 mm
Ti
024.2224 NC Healing abutmentconical shape
Height 3.5 mm,Ø 3.6 mm
Ti
024.2224S Sterile NC Healingabutmentconical
Height 3.5 mm,Ø 3.6 mm
Ti
024.2226 NC Healing abutmentconical shape
Height 5 mm,Ø 3.6 mm
Ti
024.2226S Sterile NC Healingabutmentconical
Height 5 mm,Ø 3.6 mm
Ti
024.2242 NC Healing abutmentconical shape
Height 2 mm,Ø 4.8 mm
Ti
024.2242S Sterile NC Healingabutmentconical
Height 2 mm,Ø 4.8 mm
Ti
SURG
ERY
BON
E LEVEL IMPLA
NTS Ø
3.3
mm
48
BONE LEVEL IMPLANTS Ø 3.3 mmNARROW CrossFit®
Art. No. Article Dimensions Material
024.2244 NC Healing abutmentconical shape
Height 3.5 mm,Ø 4.8 mm
Ti
024.2244S Sterile NC Healingabutmentconical
Height 3.5 mm,Ø 4.8 mm
Ti
024.2246 NC Healing abutmentconical shape
Height 5 mm,Ø 4.8 mm
Ti
024.2246S Sterile NC Healingabutmentconical
Height 5 mm,Ø 4.8 mm
Ti
024.2234 NC Healing abutmentbottle shape
Height 3.5 mm,Ø 3.3 mm
Ti
024.2234S Sterile NC Healingabutmentbottle
Height 3.5 mm,Ø 3.3 mm
Ti
024.2236 NC Healing abutmentbottle shape
Height 5 mm,Ø 3.3 mm
Ti
024.2236S Sterile NC Healingabutmentbottle
Height 5 mm,Ø 3.3 mm
Ti
024.2270 NC Healing abutmentcustomizable
Ø 5 mm PEEK
024.2270S Sterile NC Healingabutmentcustomizable
Ø 5 mm PEEK
* = Bone Level closure screws are delivered sterile and ready to use.
SURG
ERY
BON
E LE
VEL R
OXO
LID® IM
PLAN
TS Ø
3.3
mm
49
BONE LEVEL ROXOLID® IMPLANTS Ø 3.3 mmNARROW CrossFit®
Art. No. Article Dimensions Material
SLActive®
021.2208 Bone Level implant SLActive® 8 mm TiZr
021.2210 Bone Level implant SLActive® 10 mm TiZr
021.2212 Bone Level implant SLActive® 12 mm TiZr
021.2214 Bone Level implant SLActive® 14 mm TiZr
021.2208G Bone Level implantguided
SLActive® 8 mm TiZr
021.2210G Bone Level implantguided
SLActive® 10 mm TiZr
021.2212G Bone Level implantguided
SLActive® 12 mm TiZr
Closure screws and healing abutments
024.2100-04 NC Closure screw* Height 0 mm Ti
024.2100S Sterile NC Closure screw Height 0 mm Ti
024.2105-04 NC Closure screw* Height 0.5 mm Ti
024.2105S Sterile NC Closure screw Height 0.5 mm Ti
024.2222 NC Healing abutmentconical shape
Height 2 mm,Ø 3.6 mm
Ti
024.2222S Sterile NC Healingabutmentconical
Height 2 mm,Ø 3.6 mm
Ti
024.2224 NC Healing abutmentconical shape
Height 3.5 mm,Ø 3.6 mm
Ti
024.2224S Sterile NC Healingabutmentconical
Height 3.5 mm,Ø 3.6 mm
Ti
024.2226 NC Healing abutmentconical shape
Height 5 mm,Ø 3.6 mm
Ti
024.2226S Sterile NC Healingabutmentconical
Height 5 mm,Ø 3.6 mm
Ti
024.2242 NC Healing abutmentconical shape
Height 2 mm,Ø 4.8 mm
Ti
024.2242S Sterile NC Healingabutmentconical
Height 2 mm,Ø 4.8 mm
Ti
SURG
ERY
BON
E LEVEL ROXO
LID® IM
PLANTS Ø
3.3 mm
50
BONE LEVEL ROXOLID® IMPLANTS Ø 3.3 mmNARROW CrossFit®
Art. No. Article Dimensions Material
024.2244 NC Healing abutmentconical shape
Height 3.5 mm,Ø 4.8 mm
Ti
024.2244S Sterile NC Healingabutmentconical
Height 3.5 mm,Ø 4.8 mm
Ti
024.2246 NC Healing abutmentconical shape
Height 5 mm,Ø 4.8 mm
Ti
024.2246S Sterile NC Healingabutmentconical
Height 5 mm,Ø 4.8 mm
Ti
024.2234 NC Healing abutmentbottle shape
Height 3.5 mm,Ø 3.3 mm
Ti
024.2234S Sterile NC Healingabutmentbottle
Height 3.5 mm,Ø 3.3 mm
Ti
024.2236 NC Healing abutmentbottle shape
Height 5 mm,Ø 3.3 mm
Ti
024.2236S Sterile NC Healingabutmentbottle
Height 5 mm,Ø 3.3 mm
Ti
024.2270 NC Healing abutmentcustomizable
Ø 5 mm PEEK
024.2270S Sterile NC Healingabutmentcustomizable
Ø 5 mm PEEK
* = Bone Level closure screws are delivered sterile and ready to use.
SURG
ERY
BON
E LE
VEL
IMPL
AN
TS Ø
4.1
mm
51
BONE LEVEL IMPLANTS Ø 4.1 mmREGULAR CrossFit®
Art. No. Article Dimensions Material
SLActive®
021.4108 Bone Level implant SLActive® 8 mm Ti
021.4110 Bone Level implant SLActive® 10 mm Ti
021.4112 Bone Level implant SLActive® 12 mm Ti
021.4114 Bone Level implant SLActive® 14 mm Ti
SLA®
021.4408 Bone Level implant SLA® 8 mm Ti
021.4410 Bone Level implant SLA® 10 mm Ti
021.4412 Bone Level implant SLA® 12 mm Ti
021.4414 Bone Level implant SLA® 14 mm Ti
SLActive®, guided
021.4108G Bone Level implantguided
SLActive® 8 mm Ti
021.4110G Bone Level implantguided
SLActive® 10 mm Ti
021.4112G Bone Level implantguided
SLActive® 12 mm Ti
Closure screws and healing abutments
024.4100-04 RC Closure screw* Height 0 mm Ti
024.4100S Sterile RC Closure screw Height 0 mm Ti
024.4105-04 RC Closure screw* Height 0.5 mm Ti
024.4105S Sterile RC Closure screw Height 0.5 mm Ti
024.4222 RC Healing abutmentconical shape
Height 2 mm,Ø 4.5 mm
Ti
024.4222S Sterile RC Healingabutmentconical
Height 2 mm,Ø 5 mm
Ti
024.4224 RC Healing abutmentconical shape
Height 4 mm,Ø 4.5 mm
Ti
024.4224S Sterile RC Healingabutmentconical
Height 4 mm,Ø 5 mm
Ti
024.4226 RC Healing abutmentconical shape
Height 6 mm,Ø 4.5 mm
Ti
SURG
ERY
BON
E LEVEL IMPLA
NTS Ø
4.1
mm
52
BONE LEVEL IMPLANTS Ø 4.1 mmREGULAR CrossFit®
Art. No. Article Dimensions Material
024.4226S Sterile RC Healingabutmentconical
Height 6 mm,Ø 5 mm
Ti
024.4234 RC Healing abutmentbottle shape
Height 4 mm,Ø 4.4 mm
Ti
024.4234S Sterile RC Healingabutmentbottle
Height 4 mm,Ø 4.4 mm
Ti
024.4236 RC Healing abutmentbottle shape
Height 6 mm,Ø 4.7 mm
Ti
024.4236S Sterile RC Healingabutmentbottle
Height 6 mm,Ø 4.7 mm
Ti
024.4242 RC Healing abutmentconical shape
Height 2 mm,Ø 6 mm
Ti
024.4242S Sterile RC Healingabutmentconical
Height 2 mm,Ø 6.5 mm
Ti
024.4244 RC Healing abutmentconical shape
Height 4 mm,Ø 6 mm
Ti
024.4244S Sterile RC Healingabutmentconical
Height 4 mm,Ø 6.5 mm
Ti
024.4246 RC Healing abutmentconical shape
Height 6 mm,Ø 6 mm
Ti
024.4246S Sterile RC Healingabutmentconical
Height 6 mm,Ø 6.5 mm
Ti
024.4270 RC Healing abutmentcustomizable
Ø 7 mm PEEK
024.4270S Sterile RC Healingabutmentcustomizable
Ø 7 mm PEEK
* = Bone Level closure screws are delivered sterile and ready to use.
SURG
ERY
BON
E LE
VEL
IMPL
AN
TS Ø
4.8
mm
53
BONE LEVEL IMPLANTS Ø 4.8 mmREGULAR CrossFit®
Art. No. Article Dimensions Material
SLActive®
021.6108 Bone Level implant SLActive® 8 mm Ti
021.6110 Bone Level implant SLActive® 10 mm Ti
021.6112 Bone Level implant SLActive® 12 mm Ti
021.6114 Bone Level implant SLActive® 14 mm Ti
SLA®
021.6408 Bone Level implant SLA® 8 mm Ti
021.6410 Bone Level implant SLA® 10 mm Ti
021.6412 Bone Level implant SLA® 12 mm Ti
021.6414 Bone Level implant SLA® 14 mm Ti
SLActive®, guided
021.6108G Bone Level implantguided
SLActive® 8 mm Ti
021.6110G Bone Level implantguided
SLActive® 10 mm Ti
021.6112G Bone Level implantguided
SLActive® 12 mm Ti
Closure screws and healing abutments
024.4100-04 RC Closure screw* Height 0 mm Ti
024.4100S Sterile RC Closure screw Height 0 mm Ti
024.4105-04 RC Closure screw* Height 0.5 mm Ti
024.4105S Sterile RC Closure screw Height 0.5 mm Ti
024.4222 RC Healing abutmentconical shape
Height 2 mm,Ø 4.5 mm
Ti
024.4222S Sterile RC Healingabutmentconical
Height 2 mm,Ø 5 mm
Ti
024.4224 RC Healing abutmentconical shape
Height 4 mm,Ø 4.5 mm
Ti
024.4224S Sterile RC Healingabutmentconical
Height 4 mm,Ø 5 mm
Ti
024.4226 RC Healing abutmentconical shape
Height 6 mm,Ø 4.5 mm
Ti
SURG
ERY
BON
E LEVEL IMPLA
NTS Ø
4.8
mm
54
BONE LEVEL IMPLANTS Ø 4.8 mmREGULAR CrossFit®
Art. No. Article Dimensions Material
024.4226S Sterile RC Healingabutmentconical
Height 6 mm,Ø 5 mm
Ti
024.4234 RC Healing abutmentbottle shape
Height 4 mm,Ø 4.4 mm
Ti
024.4234S Sterile RC Healingabutmentbottle
Height 4 mm,Ø 4.4 mm
Ti
024.4236 RC Healing abutmentbottle shape
Height 6 mm,Ø 4.7 mm
Ti
024.4236S Sterile RC Healingabutmentbottle
Height 6 mm,Ø 4.7 mm
Ti
024.4242 RC Healing abutmentconical shape
Height 2 mm,Ø 6 mm
Ti
024.4242S Sterile RC Healingabutmentconical
Height 2 mm,Ø 6.5 mm
Ti
024.4244 RC Healing abutmentconical shape
Height 4 mm,Ø 6 mm
Ti
024.4244S Sterile RC Healingabutmentconical
Height 4 mm,Ø 6.5 mm
Ti
024.4246 RC Healing abutmentconical shape
Height 6 mm,Ø 6 mm
Ti
024.4246S Sterile RC Healingabutmentconical
Height 6 mm,Ø 6.5 mm
Ti
024.4270 RC Healing abutmentcustomizable
Ø 7 mm PEEK
024.4270S Sterile RC Healingabutmentcustomizable
Ø 7 mm PEEK
* = Bone Level closure screws are delivered sterile and ready to use.
SURG
ERY
TEM
PIM
PLA
NTS
55
TEMPIMPLANTS
Art. No. Article Dimensions Material
Implants
80371SV4 TempImplant Ø 2 mm,Thread 10 mm
Ti alloy
80372SV4 TempImplant Ø 2 mm,Thread 12 mm
Ti alloy
Auxiliary parts
80381 Drill Length 37 mm,Ø 1.5 mm
Stainlesssteel
80363 TempImplant insertingdevicemechanical
Stainlesssteel
80398 TempImplant insertingdevicemanual
Stainlesssteel
80356 TempImplant bending tool Stainlesssteel
048.109 Transfer pinfor retentive anchor*
Length 18 mm Stainlesssteel
Dalbo®-Rotex® Matrix
80399V4 Dalbo®-Rotex® Matrix PA
* = The geometry of the spherical head and square base corresponds to the geometry of the retentive anchor (Art. No. 048.439).
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
56
SURGICAL INSTRUMENTSSURGICAL PLANNING AIDS
Art. No. Article Dimensions Material
049.076V4 X-ray reference sphere Ø 5 mm Stainlesssteel
150.215 X-ray templatesfor Standard and StandardPlus implants
Plastic
150.230 X-ray templatesfor Tapered Effect implants
Plastic
150.216 X-ray templatesfor Bone Level implants
Plastic
046.147 Diagnostic Tauxiliary instrument fordiagnosis
Length 65 mm,Width 33 mm
Ti
046.148 Standard, Standard Plusand Tapered Effect implantdistance indicator
Length 100 mm Ti/Stainlesssteel
026.0901 Bone Level implantdistance indicator
Length 100 mm Ti/Stainlesssteel
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
57
SURGICAL INSTRUMENTSSURGICAL PLANNING AIDS
Art. No. Article Dimensions Material
Components for fabricating an individual drill template
049.810V4 Drill sleeve with collar Height 10 mm,Inner Ø 2.4 mm,Outer Ø 3.5 mm
Ti
049.818V4 Stepped pinfor 049.810V4
Height 16 mm,Ø 2.2/3.5 mm
Ti
049.816V4 Pinfor 049.810V4
Height 16 mm,Ø 2.2 mm
Ti
049.817V4 Pinfor 049.810V4
Height 10 mm,Ø 2.2 mm
Ti
049.819V4 Pinfor 049.810V4
Height 16 mm,Ø 3.5 mm
Ti
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
58
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Round burs
044.022 Round bur Ø 1.4 mm Stainlesssteel
044.003 Round bur Ø 2.3 mm Stainlesssteel
044.004 Round bur Ø 3.1 mm Stainlesssteel
Pilot drills
044.210 Pilot drill 1short
Length 33 mm,Ø 2.2 mm
Stainlesssteel
044.211 Pilot drill 1long
Length 41 mm,Ø 2.2 mm
Stainlesssteel
044.214 Pilot drill 2short
Length 33 mm,Ø 2.8 mm
Stainlesssteel
044.215 Pilot drill 2long
Length 41 mm,Ø 2.8 mm
Stainlesssteel
Twist drills
044.250 Twist drill PROshort
Length 33 mm,Ø 3.5 mm
Stainlesssteel
044.251 Twist drill PROlong
Length 41 mm,Ø 3.5 mm
Stainlesssteel
044.254 Twist drill PROshort
Length 33 mm,Ø 4.2 mm
Stainlesssteel
044.255 Twist drill PROlong
Length 41 mm,Ø 4.2 mm
Stainlesssteel
Profile drills
044.086 SP Profile drillshort
Regular Neck,Length 25 mm,Ø 2.8 mm
Stainlesssteel
044.087 SP Profile drilllong
Regular Neck,Length 34 mm,Ø 2.8 mm
Stainlesssteel
044.088 SP Profile drillshort
Regular Neck,Length 25 mm,Ø 3.5 mm
Stainlesssteel
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
59
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Profile drills
044.089 SP Profile drilllong
Regular Neck,Length 34 mm,Ø 3.5 mm
Stainlesssteel
044.084 SP Profile drillshort
Wide Neck,Length 25 mm,Ø 4.2 mm
Stainlesssteel
044.085 SP Profile drilllong
Wide Neck,Length 34 mm,Ø 4.2 mm
Stainlesssteel
044.701 TE Profile drillshort
Regular Neck,Length 28 mm,Ø 2.8 mm
Stainlesssteel
044.708 TE Profile drilllong
Regular Neck,Length 37 mm,Ø 2.8 mm
Stainlesssteel
044.705 TE Profile drillshort
Regular Neck,Length 28 mm,Ø 3.5 mm
Stainlesssteel
044.712 TE Profile drilllong
Regular Neck,Length 37 mm,Ø 3.5 mm
Stainlesssteel
044.703 TE Profile drillshort
Wide Neck,Length 28 mm,Ø 4.2 mm
Stainlesssteel
044.710 TE Profile drilllong
Wide Neck,Length 37 mm,Ø 4.2 mm
Stainlesssteel
026.2303 BL/NNC Profile drillshort
Length 26 mm,Ø 3.3 mm
Stainlesssteel
026.2306 BL/NNC Profile drilllong
Length 35 mm,Ø 3.3 mm
Stainlesssteel
026.4303 BL Profile drillshort
Length 26 mm,Ø 4.1 mm
Stainlesssteel
026.4306 BL Profile drilllong
Length 35 mm,Ø 4.1 mm
Stainlesssteel
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
60
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Profile drills
026.6303 BL Profile drillshort
Length 26 mm,Ø 4.8 mm
Stainlesssteel
026.6306 BL Profile drilllong
Length 35 mm,Ø 4.8 mm
Stainlesssteel
Taps
044.575 S/SP Tapfor adapter
Length 23 mm,Ø 3.3 mm
Stainlesssteel/PEEK
044.577 S/SP Tapfor adapter
Length 23 mm,Ø 4.1 mm
Stainlesssteel/PEEK
044.579 S/SP Tapfor adapter
Length 23 mm,Ø 4.8 mm
Stainlesssteel/PEEK
026.2310 BL/TE/NNC Tap foradapter
Length 23 mm,Ø 3.3 mm
Stainlesssteel/PEEK
026.4310 BL/TE Tap for adapter Length 23 mm,Ø 4.1 mm
Stainlesssteel/PEEK
026.6310 BL/TE Tap for adapter Length 23 mm,Ø 4.8 mm
Stainlesssteel/PEEK
Alignment pin and depth gauges
046.458 Alignment pin Length 28 mm,Ø 2.2 mm
Ti
046.455 Depth gaugewith distance indicator
Length 27 mm,Ø 2.2/2.8 mm
Ti
046.450 Depth gauge Length 26 mm,Ø 3.5 mm
Ti
046.451 Depth gauge Length 26 mm,Ø 4.2 mm
Ti
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
61
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Bone Profilers
044.304 RN Bone profilerfor use with 049.082
InnerØ 3.6/4.8 mm,Outer Ø 5.4 mm,Length 28 mm
Stainlesssteel
044.305 WN Bone profilerfor use with 049.082
InnerØ 3.6/6.5 mm,Outer Ø 7.2 mm,Length 25 mm
Stainlesssteel
049.082 SCS Guiding cylinderfor Straumann® dentalimplants Ø 3.3 mm andØ 3.5 mm
Length 10.5 mm,Ø 3.6 mm
Stainlesssteel
ImportantBone profilers cannot be used for Straumann® Bone Level implants.The SCS Guiding cylinder is intended for single use only.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
62
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Material
Starter Sets: Starter sets contain instruments needed for placing Straumann® Standard and Standard Plusimplants
040.330 Surgical instruments starter set, Ø 4.1 mm,Tap for adapter, for preparation using thehandpiece,consisting of:044.210 Pilot drill 1, short, Ø 2.2 mm044.211 Pilot drill 1, long, Ø 2.2 mm044.214 Pilot drill 2, short, Ø 2.8 mm044.215 Pilot drill 2, long, Ø 2.8 mm044.218 Twist drill, short, Ø 3.5 mm044.219 Twist drill, long, Ø 3.5 mm044.577 S/SP Tap for adapter, Ø 4.1 mm046.458 Alignment pin, Ø 2.2 mm046.455 Depth gauge with distanceindicator, Ø 2.2/2.8 mm046.450 Depth gauge for Standard andStandard Plus implants Ø 4.1 mm
040.331 Surgical instruments starter set, Ø 4.8 mm,Tap for adapter, for preparation using thehandpiececonsisting of:044.254 Twist drill PRO, short, Ø 4.2 mm044.255 Twist drill PRO, long, Ø 4.2 mm044.579 S/SP Tap for adapter, Ø 4.8 mm046.451 Depth gauge for Standard andStandard Plus implants Ø 4.8 mm
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
63
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Single-patient drills (drill stop compatible)
040.440S Drill setshort, drill stopcompatible, for Ø 3.3 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Length 33 mm
Stainlesssteel
040.441S Drill setlong, drill stopcompatible, for Ø 3.3 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Length 41 mm
Stainlesssteel
040.443S Drill setshort, drill stopcompatible, for Ø 4.1 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Length 33 mm
Stainlesssteel
040.444S Drill setlong, drill stopcompatible, for Ø 4.1 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Length 41 mm
Stainlesssteel
040.446S Drill setshort, drill stopcompatible, for Ø 4.8 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Ø 4.2 mm,Length 33 mm
Stainlesssteel
040.447S Drill setlong, drill stopcompatible, for Ø 4.8 mmimplant, single-patient use,sterile
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Ø 4.2 mm,Length 41 mm
Stainlesssteel
IndicationSingle-patient drills are indicated for all implant bed preparation procedures with the Straumann® Dental ImplantSystem. They are supplied sterile-packed and must only be used for one patient and one surgery. Single-patient drillscan minimize the infection risk for patients, and their color coding simplifies implant bed preparation.
WarningSingle-patient drills cannot be resterilized! Resterilization renders these drills unusable.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
64
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Material
Straumann® Drill stop
040.460 Drill stop kit3 x drill stop set, type A,3 x drill stop set, type B,3 x drill stop set, type C,3 x drill stop set, type D,1 x drill stop aid
Plastic
040.454S Refill package: Drill stop settype A, for short drill 12 mm/long drill16 mm, Ø 3.3/4.1/4.8 mm implants
Plastic
040.455S Refill package: Drill stop settype B, for short drill 10 mm/long drill14 mm, Ø 3.3/4.1/4.8 mm implants
Plastic
040.456S Refill package: Drill stop settype C, for short drill 8 mm/long drill12 mm, Ø 3.3/4.1/4.8 mm implants
Plastic
040.457S Refill package: Drill stop settype D, for short drill 6 mm/long drill10 mm, Ø 3.3/4.1/4.8 mm implants
Plastic
040.461 Drill stop aid Plastic
The Straumann® Drill Stop provides precise control over drilling depth during implant bed preparation for theplacement of Straumann® dental implants. Delivered in sterile sets, the drill stops are ready to use. The Straumann® Drill Stop is designed for single-patient use only and must be used in conjunction with the single-patient drillsspecifically designed for them.
Each Straumann® Drill Stop set includes drill stops with the following diameters:Ø 2.2 mm (blue), Ø 2.8 mm (yellow), Ø 3.5 mm (red),Ø 4.2 mm (green). These diameters correspond to the diameters of the Straumann® drills.
ImportantStraumann® drill stops are not indicated for:� Extraction sites, where bone cavity is often wider than the diameter necessary to hold the drill stop.� Use with drill templates, due to the interference from or with the template.
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
65
SURGICAL INSTRUMENTSIMPLANT BED PREPARATION INSTRUMENTS
Art. No. Article Dimensions Material
Single-patient drills (drill stop incompatible)
040.400S Drill setshort, drill stopincompatible, for 3.3 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Length 33 mm
Stainlesssteel
040.401S Drill setshort, drill stopincompatible, for 3.3 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Length 41 mm
Stainlesssteel
040.403S Drill setshort, drill stopincompatible, for 4.1 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Length 33 mm
Stainlesssteel
040.404S Drill setlong, drill stopincompatible, for 4.1 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Length 41 mm
Stainlesssteel
040.406S Drill setshort, drill stopincompatible, for 4.8 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Ø 4.2 mm,Length 33 mm
Stainlesssteel
040.407S Drill setlong, drill stopincompatible, for 4.8 mmimplant, single-patient use,sterile.
Ø 2.2 mm,Ø 2.8 mm,Ø 3.5 mm,Ø 4.2 mm,Length 41 mm
Stainlesssteel
IndicationSingle-patient drills are indicated for all implant bed preparation procedures with the Straumann® Dental ImplantSystem. They are supplied sterile-packed and must only be used for one patient and one surgery. Single-patient drillscan minimize the infection risk for patients, and their color coding simplifies implant bed preparation.
WarningSingle-patient drills cannot be resterilized! Resterilization renders these drills unusable.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
66
SURGICAL INSTRUMENTSAUXILIARY INSTRUMENTS
Art. No. Article Dimensions Material
046.110 Instrument tweezers Length 140 mm Stainlesssteel
046.095 Tweezerswith titanium plasma-coated tips
Length 115 mm Stainlesssteel/Ti
046.057 Tweezerswithout titanium plasma-coated tips
Length 115 mm Stainlesssteel
046.119 Ratchetincludes service instrument
Length 84 mm Stainlesssteel
046.108 Service instrumentfor ratchet
Length 50 mm Stainlesssteel
045.111V4 Cleaning brushfor ratchet
Length 100 mm,Ø 4.5 mm
Stainlesssteel/Nylon
046.049 Torque control devicefor ratchet
Length 82 mm Stainlesssteel
046.064 Holding key Length 85 mm Stainlesssteel
046.460 Adapterfor ratchet, extra short
Length 11 mm Stainlesssteel
046.461 Adapterfor ratchet, short
Length 18 mm Stainlesssteel
046.462 Adapterfor ratchet, long
Length 28 mm Stainlesssteel
046.470 Adapterfor handpiece, extra short
Length 19 mm Stainlesssteel
046.471 Adapterfor handpiece, short
Length 26 mm Stainlesssteel
046.472 Adapterfor handpiece, long
Length 34 mm Stainlesssteel
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
67
SURGICAL INSTRUMENTSAUXILIARY INSTRUMENTS
Art. No. Article Dimensions Material
Screwdrivers
046.400 SCS Screwdriverfor ratchet, extra short
Length 15 mm Cronidur® 30
046.401 SCS Screwdriverfor ratchet, short
Length 21 mm Cronidur® 30
046.402 SCS Screwdriverfor ratchet, long
Length 27 mm Cronidur® 30
046.410 SCS Screwdriverfor handpiece, extra short
Length 20 mm Cronidur® 30
046.411 SCS Screwdriverfor handpiece, short
Length 26 mm Cronidur® 30
046.412 SCS Screwdriverfor handpiece, long
Length 32 mm Cronidur® 30
046.421 Hexagonal screwdriver Length 30 mm Stainlesssteel
045.921 Light curette for implants(5 per pack)*
* = See below for manufacturer details.
The SCS screwdrivers also act as inserting instruments for the WN Solid abutments, for all synOcta® abutments, for allCrossFit® prosthetic components as well as for all closure screws and healing caps in the Straumann® Dental ImplantSystem.
ManufacturerKerr Hawe SAZona StrecceCH-6934 BioggioSwitzerland
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
68
SURGICAL INSTRUMENTSSURGICAL CASSETTE
Art. No. Article Dimensions Material
Surgical cassette
040.165 Straumann® Surgicalcassetteincludes screw container041.047, withoutinstruments*
Length 290 mm,Width 175 mm,Height 62 mm
Plastic
041.047 Screw containerwith lid, for Straumann® surgical cassette, withoutscrews
Length 69 mm,Width 47 mm,Height 29 mm
Plastic
Ultrasonic Cleaning Cassette
040.175 Ultrasonic cleaningcassette
Length 150 mm,Width 65 mm,Height 25 mm
Plastic/Silicone
Storage system
041.500 Storage systemfor implants (SLA®/SLActive®), incl. drawersand dividers
Length 226 mm,Width 280 mm,Height 248 mm
PS
* = For extra grommets please contact your local Straumann sales representative.
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
69
SURGICAL INSTRUMENTSOSTEOTOMES
Art. No. Article Dimensions Material
For bone condensation
040.500 Osteotome instrument kitfor bone condensationkit contains:
Stainlesssteel/Plastic
046.500 Osteotomestraight, for bonecondensation
Ø 2.2 mm Stainlesssteel
046.501 Osteotomestraight, for bonecondensation
Ø 2.8 mm Stainlesssteel
046.510 Osteotomeangled, for bonecondensation
Ø 2.2 mm Stainlesssteel
046.502 Osteotomestraight, for bonecondensation
Ø 3.5 mm Stainlesssteel
046.503 Osteotomestraight, for bonecondensation
Ø 4.2 mm Stainlesssteel
046.511 Osteotomeangled, for bonecondensation
Ø 2.8 mm Stainlesssteel
046.512 Osteotomeangled, for bonecondensation
Ø 3.5 mm Stainlesssteel
046.513 Osteotomeangled, for bonecondensation
Ø 4.2 mm Stainlesssteel
046.550 Depth stop Ø 2.2 mm Ti/Stainlesssteel
046.551 Depth stop Ø 2.8 mm Ti/Stainlesssteel
The instruments and depth stops are also available individually.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
70
SURGICAL INSTRUMENTSOSTEOTOMES
Art. No. Article Dimensions Material
046.552 Depth stop Ø 3.5 mm Ti/Stainlesssteel
046.553 Depth stop Ø 4.2 mm Ti/Stainlesssteel
040.550 Cassette for bonecondensation osteotomes,without content
Stainlesssteel/Plastic
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
The instruments and depth stops are also available individually.
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
71
SURGICAL INSTRUMENTSOSTEOTOMES
Art. No. Article Dimensions Material
For sinus floor elevation
040.501 Osteotome instrument kitfor partial sinus floorelevationkit contains:
Stainlesssteel/Plastic
046.521 Osteotomestraight, for sinus floorelevation
Ø 2.8 mm Stainlesssteel
046.522 Osteotomestraight, for sinus floorelevation
Ø 3.5 mm Stainlesssteel
046.523 Osteotomestraight, for sinus floorelevation
Ø 4.2 mm Stainlesssteel
046.531 Osteotomeangled, for sinus floorelevation
Ø 2.8 mm Stainlesssteel
046.532 Osteotomeangled, for sinus floorelevation
Ø 3.5 mm Stainlesssteel
046.533 Osteotomeangled, for sinus floorelevation
Ø 4.2 mm Stainlesssteel
046.551 Depth stop Ø 2.8 mm Ti/Stainlesssteel
046.552 Depth stop Ø 3.5 mm Ti/Stainlesssteel
046.553 Depth stop Ø 4.2 mm Ti/Stainlesssteel
040.560 Cassette for sinus floorelevation osteotomes,without content
Stainlesssteel/Plastic
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
The instruments and depth stops are also available individually.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
72
SURGICAL INSTRUMENTSEXPLANTATION
Art. No. Article Dimensions Material
Explantation drills
044.330 Explantation drillshort, for Straumann® dental implantsØ 3.3 mm and Ø 3.5 mm
Length 32 mm,Inner Ø 3.6 mm,Outer Ø 4.2 mm
Stainlesssteel
044.331 Explantation drillmedium, for Straumann® dental implantsØ 3.3 mm and Ø 3.5 mm
Length 37.5 mm,Inner Ø 3.6 mm,Outer Ø 4.2 mm
Stainlesssteel
044.332 Explantation drilllong, for Straumann® dental implantsØ 3.3 mm and Ø 3.5 mm
Length 40.5 mm,Inner Ø 3.6 mm,Outer Ø 4.2 mm
Stainlesssteel
044.340 Explantation drillshort, for Straumann® dental implantsØ 4.1 mm
Length 32 mm,Inner Ø 4.2 mm,Outer Ø 4.8 mm
Stainlesssteel
044.341 Explantation drillmedium, for Straumann® dental implantsØ 4.1 mm
Length 37.5 mm,Inner Ø 4.2 mm,Outer Ø 4.8 mm
Stainlesssteel
044.342 Explantation drilllong, for Straumann® dental implantsØ 4.1 mm
Length 40.5 mm,Inner Ø 4.2 mm,Outer Ø 4.8 mm
Stainlesssteel
044.344 Explantation drillshort, for Straumann® dental implantsØ 4.8 mm
Length 32 mm,Inner Ø 4.9 mm,Outer Ø 5.5 mm
Stainlesssteel
044.345 Explantation drillmedium, for Straumann® dental implantsØ 4.8 mm
Length 37.5 mm,Inner Ø 4.9 mm,Outer Ø 5.5 mm
Stainlesssteel
044.346 Explantation drilllong, for Straumann® dental implantsØ 4.8 mm
Length 40.5 mm,Inner Ø 4.9 mm,Outer Ø 5.5 mm
Stainlesssteel
ImportantExplantation drills are intended for single use only.
SURG
ERY
SURG
ICA
L IN
STRU
MEN
TS
73
SURGICAL INSTRUMENTSEXPLANTATION
Art. No. Article Dimensions Material
Explantation aids: Explantation of S/SP/TE implants without abutment
049.082 SCS Guiding cylinderfor Straumann® dentalimplants Ø 3.3 mm andØ 3.5 mm
Length 10.5 mm,Ø 3.6 mm
Stainlesssteel
049.083 SCS Guiding cylinderfor Straumann® dentalimplants Ø 4.1 mm
Length 10.5 mm,Ø 4.2 mm
Stainlesssteel
049.167 SCS Guiding cylinderfor Straumann® dentalimplants Ø 4.8 mm
Length 10.5 mm,Ø 4.9 mm
Stainlesssteel
049.182 SCS Guiding cylinderfor Straumann® dentalimplantsØ 3.3 mm Narrow Neck
Length 5 mm,Ø 3.6 mm
Ti/Stainlesssteel
049.360 SCS Guiding cylinderfor Straumann® dentalimplants Ø 3.3 mmNarrow Neck Crossfit®
Length 10.1 mm Stainlesssteel
Explantation aids: Explantation of Bone Level implants without abutment
026.2801 NC Guiding cylinderfor explantation ofØ 3.3 mm Bone Levelimplants
Length 10.7 mm,Ø 3.6 mm
Stainlesssteel
026.4801 RC Guiding cylinderfor explantation ofØ 4.1 mm Bone Levelimplants
Length 10.9 mm,Ø 4.2 mm
Stainlesssteel
026.6801 RC Guiding cylinderfor explantation ofØ 4.8 mm Bone Levelimplants
Length 10.9 mm,Ø 4.9 mm
Stainlesssteel
Explantation aids: Explantation of S/SP/TE implants with abutment
049.850 RN Guiding sleevefor Straumann® dentalimplants, Ø 3.3 mm,cement-retained andscrew-retained
Length 4.5 mm,Ø 3.6 mm
Stainlesssteel
049.071 RN Guiding sleevefor Straumann® dentalimplants, Ø 4.1 mm andØ 3.5 mm, cement-retained and screw-retained
Length 5.6 mm,Ø 4.2 mm
Stainlesssteel
049.851 RN Guiding sleevefor Straumann® dentalimplants, Ø 4.8 mm,cement-retained andscrew-retained
Length 6.4 mm,Ø 4.9 mm
Stainlesssteel
ImportantThe explantation aids are intended for single use only.
SURG
ERY
SURG
ICA
L INSTRU
MEN
TS
74
SURGICAL INSTRUMENTSEXPLANTATION
Art. No. Article Dimensions Material
Explantation aids: Explantation of S/SP/TE implants with abutment
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
049.181 SCS Occlusal screwlong for screw-retaining ofguiding sleeves on anOcta, synOcta® or coneabutment 15°
Length 7.6 mm TAN
Explantation devices
026.2048 48h Explantation devicefor Bone Level NCImplants
Ø 8 mm,Length 31.4 mm
Stainlesssteel
026.4048 48h Explantation devicefor Bone Level RC Implants
Ø 8 mm,Length 31.2 mm
Stainlesssteel
049.361 48h Explantation devicefor Soft Tissue Level NNCImplants
Ø 8 mm,Length 31.4 mm
Stainlesssteel
80103 48h Explantation devicefor Soft Tissue LevelsynOcta® implants, short
Ø 8 mm,Length 20.6 mm
Stainlesssteel
80087 48h Explantation devicefor Soft Tissue LevelsynOcta® implants, long
Ø 8 mm,Length 26.6 mm
Stainlesssteel
ImportantThe explantation aids are intended for single use only.
SURG
ERY
STRA
UMAN
N® C
ARES
® G
UIDE
D SU
RGER
Y
75
STRAUMANN® CARES® GUIDED SURGERYcoDiagnostiX™
Art. No. Article Dimensions Material
coDiagnostiX™ licences
019.0370 coDiagnostiX™ 8 PPP
019.0371 coDiagnostiX™ 8 PPG
019.0372 coDiagnostiX™ 8 Station
019.0373 coDiagnostiX™ 8coDoctor™
coDiagnostiX™ units
019.0374 coDiagnostiX™ unit
Please contact your local Straumann representative for more information about coDiagnostiX™, upgrades, spare parts,manuals and different software modules.
SURG
ERY
STRAUMAN
N® C
ARES® G
UIDED SURGERY
76
STRAUMANN® CARES® GUIDED SURGERYgonyX™
Art. No. Article Dimensions Material
gonyX™
019.0201 Straumann® gonyX™
019.0212 NSK® handpiece forgonyX™
019.0213 NSK® control unit EU
019.0216 NSK® control unit NA
gonyX™ consumables
034.056-04 Closing lidfor sleeve positioner, forØ 2.8 mm sleevesSet of 4
Ø 2.8 mm PEEK
034.057 Sleeve positionerfor gonyX™, forØ 2.8 mm sleeves
Ø 2.8 mm TAN
034.058-04 Closing lidfor sleeve positioner, forØ 5 mm sleeves, Set of 4
Ø 5 mm PEEK
034.059 Sleeve positionerfor gonyX™, for Ø 5 mmsleeves
Ø 5 mm TAN
034.064-03 Reference pinfor templiX reference plateSet of 3
Length 7 mm,Ø 2 mm
Ti
034.066 gonyX™ drill set Ø 3.8 mm,Ø 4.6 mm,Ø 5.4 mm,Ø 6.3 mm,Ø 7.3 mm
Stainlesssteel
Please contact your local Straumann representative for more information about the gonyX™, consumables and spareparts.
Straumann® CARES® Guided Surgery – Guided surgery kit and guided implantsPlease find more information on the Guided Surgery kit on p. 78 ff. Details on the guided implants can be found inthe implant section on p. 24 ff.
SURG
ERY
STRA
UMAN
N® C
ARES
® G
UIDE
D SU
RGER
Y
77
STRAUMANN® CARES® GUIDED SURGERYgonyX™
Art. No. Article Dimensions Material
gonyX™ consumables
034.061 Stepped drillfor Ø 5 mm sleeves034.053V4
Ø 6.3/7.3 mm Stainlesssteel
034.060 Stepped drillfor Ø 2.8 mm sleeves034.055V4
Ø 3.8/4.6 mm Stainlesssteel
034.062-03 templiX reference plateSet of 3
Polymer
034.069V5 Girrbach Splitex® CounterplateSet of 5
Polymer/Stainlesssteel
Sleeves for Straumann® Guided Surgery
034.050V4 Sleeve Height 5 mm,Ø 5 mm
Stainlesssteel
034.052V4 Sleeve Height 6 mm,Ø 2.8 mm
Stainlesssteel
034.053V4 T-sleeve Height 5 mm,Ø 5 mm
Stainlesssteel
034.055V4 T-sleeve Height 6 mm,Ø 2.8 mm
Stainlesssteel
Please contact your local Straumann representative for more information about the gonyX™, consumables and spareparts.
Straumann® CARES® Guided Surgery – Guided surgery kit and guided implantsPlease find more information on the Guided Surgery kit on p. 78 ff. Details on the guided implants can be found inthe implant section on p. 24 ff.
SURG
ERY
STRAUMAN
N® C
ARES® G
UIDED SURGERY
78
STRAUMANN® CARES® GUIDED SURGERYSURGICAL INSTRUMENTS
Art. No. Article Dimensions Material
Guided mucosa punches
034.010 Mucosa punchguided
Length 30 mm,Ø 3.4 mm
Stainlesssteel
034.011 Mucosa punchguided
Length 30 mm,Ø 4 mm
Stainlesssteel
034.012 Mucosa punchguided
Length 30 mm,Ø 4.7 mm
Stainlesssteel
Guided milling cutters
034.215 Milling cutterguided
Length 32.5 mm,Ø 2.8 mm
Stainlesssteel
034.415 Milling cutterguided
Length 32.5 mm,Ø 3.5 mm
Stainlesssteel
034.615 Milling cutterguided
Length 32.5 mm,Ø 4.2 mm
Stainlesssteel
Guided pilot drills
034.123 Pilot drillshort, guided
Length 32 mm,Ø 2.2 mm
Stainlesssteel
034.126 Pilot drilllong, guided
Length 36 mm,Ø 2.2 mm
Stainlesssteel
034.129 Pilot drillextra-long, guided
Length 40 mm,Ø 2.2 mm
Stainlesssteel
Guided twist drills
034.223 Twist drill PROshort, guided
Length 32 mm,Ø 2.8 mm
Stainlesssteel
034.226 Twist drill PROlong, guided
Length 36 mm,Ø 2.8 mm
Stainlesssteel
034.229 Twist drill PROextra-long, guided
Length 40 mm,Ø 2.8 mm
Stainlesssteel
034.423 Twist drill PROshort, guided
Length 32 mm,Ø 3.5 mm
Stainlesssteel
034.426 Twist drill PROlong, guided
Length 36 mm,Ø 3.5 mm
Stainlesssteel
034.429 Twist drill PROextra-long, guided
Length 40 mm,Ø 3.5 mm
Stainlesssteel
SURG
ERY
STRA
UMAN
N® C
ARES
® G
UIDE
D SU
RGER
Y
79
STRAUMANN® CARES® GUIDED SURGERYSURGICAL INSTRUMENTS
Art. No. Article Dimensions Material
Guided twist drills
034.623 Twist drill PROshort, guided
Length 32 mm,Ø 4.2 mm
Stainlesssteel
034.626 Twist drill PROlong, guided
Length 36 mm,Ø 4.2 mm
Stainlesssteel
034.629 Twist drill PROextra-long, guided
Length 40 mm,Ø 4.2 mm
Stainlesssteel
SURG
ERY
STRAUMAN
N® C
ARES® G
UIDED SURGERY
80
STRAUMANN® CARES® GUIDED SURGERYSURGICAL INSTRUMENTS
Art. No. Article Dimensions Material
Guided profile drills
034.235 SP Profile drillguided
Regular Neck,Length 35 mm,Ø 3.3 mm
Stainlesssteel
034.237 TE Profile drillguided
Regular Neck,Length 37 mm,Ø 3.3 mm
Stainlesssteel
026.2503 BL/NNC Profile drillguided
Length 37 mm,Ø 3.3 mm
Stainlesssteel
034.435 SP Profile drillguided
Regular Neck,Length 35 mm,Ø 4.1 mm
Stainlesssteel
034.437 TE Profile drillguided
Regular Neck,Length 37 mm,Ø 4.1 mm
Stainlesssteel
026.4503 BL Profile drillguided
Length 37 mm,Ø 4.1 mm
Stainlesssteel
026.6503 BL Profile drillguided
Length 37 mm,Ø 4.8 mm
Stainlesssteel
Important Do not use SP Profile drills with Standard Plus implants Ø 3.3 mm, NNC/NN, or with Standard Plus implantsØ 4.8 mm, RN. For SP NNC Ø 3.3 mm implants, use the 026.2510 BL/TE/NNC Tap for handpiece, guided, forpre-tapping the implant bed for NNC implants.
SURG
ERY
STRA
UMAN
N® C
ARES
® G
UIDE
D SU
RGER
Y
81
STRAUMANN® CARES® GUIDED SURGERYSURGICAL INSTRUMENTS
Art. No. Article Dimensions Material
Guided taps
034.245 S/SP Tapfor handpiece, guided
Length 42 mm,Ø 3.3 mm
Stainlesssteel
026.2510 BL/TE/NNC Tapfor handpiece, guided
Length 42 mm,Ø 3.3 mm
Stainlesssteel
034.445 S/SP Tapfor handpiece, guided
Length 42 mm,Ø 4.1 mm
Stainlesssteel
026.4510 BL/TE Tapfor handpiece, guided
Length 42 mm,Ø 4.1 mm
Stainlesssteel
034.645 S/SP Tapfor handpiece, guided
Length 42 mm,Ø 4.8 mm
Stainlesssteel
026.6510 BL/TE Tapfor handpiece, guided
Length 42 mm,Ø 4.8 mm
Stainlesssteel
Important Do not use SP Profile drills with Standard Plus implants Ø 3.3 mm, NNC/NN, or with Standard Plus implantsØ 4.8 mm, RN. For SP NNC Ø 3.3 mm implants, use the 026.2510 BL/TE/NNC Tap for handpiece, guided, forpre-tapping the implant bed for NNC implants.
SURG
ERY
STRAUMAN
N® C
ARES® G
UIDED SURGERY
82
STRAUMANN® CARES® GUIDED SURGERYAUXILIARY INSTRUMENTS
Art. No. Article Dimensions Material
Auxiliary parts
034.150 Drill handleØ 2.2 mm
Stop 1/3 mm,Ø 2.2 mm
Stainlesssteel
034.250 Drill handleØ 2.8 mm
Stop 1/3 mm,Ø 2.8 mm
Stainlesssteel
034.450 Drill handleØ 3.5 mm
Stop 1/3 mm,Ø 3.5 mm
Stainlesssteel
034.650 Drill handleØ 4.2 mm
Stop 1/3 mm,Ø 4.2 mm
Stainlesssteel
034.750 C-handle H2 Stainlesssteel
034.751 C-handle H4 Stainlesssteel
034.752 C-handle H6 Stainlesssteel
034.256 Template fixation pinguided
Ø 2.8/2.8 mm Stainlesssteel
034.255 Template fixation pinguided
Ø 5/2.8 mm Stainlesssteel
034.455 Template fixation pinguided
Ø 5/3.5 mm Stainlesssteel
034.655 Template fixation pinguided
Ø 5/4.2 mm Stainlesssteel
034.005 Connectorfor ratchet
Stainlesssteel
Stop key
034.006 Stop key Stainlesssteel
SURG
ERY
STRA
UMAN
N® C
ARES
® G
UIDE
D SU
RGER
Y
83
STRAUMANN® CARES® GUIDED SURGERYAUXILIARY INSTRUMENTS
Art. No. Article Dimensions Material
046.110 Instrument tweezers Length 140 mm Stainlesssteel
046.095 Tweezerswith titanium plasma-coated tips
Length 115 mm Stainlesssteel/Ti
046.057 Tweezerswithout titanium plasma-coated tips
Length 115 mm Stainlesssteel
046.119 Ratchetincludes service instrument
Length 84 mm Stainlesssteel
046.108 Service instrumentfor ratchet
Length 50 mm Stainlesssteel
045.111V4 Cleaning brushfor ratchet
Length 100 mm,Ø 4.5 mm
Stainlesssteel/Nylon
046.049 Torque control devicefor ratchet
Length 82 mm Stainlesssteel
046.064 Holding key Length 85 mm Stainlesssteel
046.460 Adapterfor ratchet, extra short
Length 11 mm Stainlesssteel
046.461 Adapterfor ratchet, short
Length 18 mm Stainlesssteel
046.462 Adapterfor ratchet, long
Length 28 mm Stainlesssteel
046.470 Adapterfor handpiece, extra short
Length 19 mm Stainlesssteel
046.471 Adapterfor handpiece, short
Length 26 mm Stainlesssteel
046.472 Adapterfor handpiece, long
Length 34 mm Stainlesssteel
SURG
ERY
STRAUMAN
N® C
ARES® G
UIDED SURGERY
84
STRAUMANN® CARES® GUIDED SURGERYGUIDED SURGERY CASSETTE
Art. No. Article Dimensions Material
034.001 Surgical cassettefor Straumann® GuidedSurgery*
Length 290 mm,Width 175 mm,Height 62 mm
* = For extra grommets please contact your local Straumann sales representative.
PRO
STH
ETIC
S
PROSTHETICS
PRO
STH
ETIC
S
Cassettes, inserts and storage system 86Prosthetic instruments 87Prosthetics for Straumann® Standard, Standard Plus and Tapered Effect Implants� Prosthetic planning aids 89� Straumann® CARES® Implant-borne prosthetics 93� Crowns and bridges 99� Hybrid dentures 129Prosthetics for Straumann® Bone Level implants� Prosthetic planning aids 151� Straumann® CARES® Implant-borne prosthetics 157� Crowns and bridges 161� Hybrid dentures 188Straumann® Classic 208
PRO
STH
ETICS
CASSETTES, INSERTS AN
D STORAG
E SYSTEM
86
CASSETTES, INSERTS AND STORAGE SYSTEM
Art. No. Article Dimensions Material
040.185 Prosthetic cassettefor instruments andauxiliary components,complete (withoutdividers)
Length 224 mm,Width 115 mm,Height 20 mm
Anodized Al
041.022 Prosthetic cassettefor instruments andauxiliary components
Length 224 mm,Width 115 mm,Height 20 mm
Anodized Al
041.211 Trayfor cassette 041.022
Length 218 mm,Width 109 mm,Height 16 mm
Anodized Al
041.612 Dividerlarge, for dish 041.440
Length 47.5 mm,Width 9.5 mm,Height 1 mm
Anodized Al
041.615 Dividersmall, for dish 041.440
Length 27.5 mm,Width 9.5 mm,Height 1 mm
Anodized Al
041.440 Dishfor tray 041.211
Length 56 mm,Width 31 mm,Height 11 mm
Anodized Al
041.412 Calibration cupyellow
Ø 80 mm Anodized Al
Auxiliary parts
140.055 Plexiglass cassette/Membranette
Length 150 mm,Width 100 mm
Plastic
Storage system
041.501 Storage systemfor prosthetics incl.drawers and dividers
Length 226 mm,Width 280 mm,Height 248 mm
PS
PRO
STH
ETIC
SPR
OST
HET
IC IN
STRU
MEN
TS
87
PROSTHETIC INSTRUMENTS
Art. No. Article Dimensions Material
046.400 SCS Screwdriverfor ratchet, extra short
Length 15 mm Cronidur® 30
046.401 SCS Screwdriverfor ratchet, short
Length 21 mm Cronidur® 30
046.402 SCS Screwdriverfor ratchet, long
Length 27 mm Cronidur® 30
046.085 Screwdriver handlefor 046.410/411/412
Length 109 mm Stainlesssteel/PEEK
046.410 SCS Screwdriverfor handpiece, extra short
Length 20 mm Cronidur® 30
046.411 SCS Screwdriverfor handpiece, short
Length 26 mm Cronidur® 30
046.412 SCS Screwdriverfor handpiece, long
Length 32 mm Cronidur® 30
046.067 Solid abutment driverfor RN Solid abutments6°, short
Length 13 mm Stainlesssteel
046.068 Solid abutment driverfor RN Solid abutments6°, long
Length 19 mm Stainlesssteel
046.069 Retentive anchor driver Length 19 mm Stainlesssteel
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
PRO
STH
ETICS
PROSTH
ETIC IN
STRUM
ENTS
88
PROSTHETIC INSTRUMENTS
Art. No. Article Dimensions Material
046.119 Ratchetincludes service instrument
Length 84 mm Stainlesssteel
046.108 Service instrumentfor ratchet
Length 50 mm Stainlesssteel
046.049 Torque control devicefor ratchet
Length 82 mm Stainlesssteel
045.111V4 Cleaning brushfor ratchet
Length 100 mm,Ø 4.5 mm
Stainlesssteel/Nylon
046.239 Analog holder Length 105 mm Al/Steel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.237 NNC Reamerfor 45° shoulder
Ø 8 mm Carbidemetal
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.246 Guide pinfor reamer 046.243, forsynOcta® 048.605
Length 50 mm Stainlesssteel
046.241 synOcta® Guide pinfor reamer 046.243, forsynOcta® 1.5 abutments
Length 50 mm Stainlesssteel
046.247 synOcta® Guide pinfor reamer 046.243, forsynOcta® 048.606
Length 50 mm Al/Ti
046.249 NNC Guide pinfor reamer 046.237
Length 50 mm Stainlesssteel
The SCS screwdrivers also act as inserting instruments for the WN Solid abutments, for all synOcta® abutments, for allCrossFit® prosthetic components as well as for all closure screws and healing caps in the Straumann® Dental ImplantSystem.
PRO
STH
ETIC
SPR
OST
HET
IC P
LAN
NIN
G A
IDS
89
PROSTHETIC PLANNING AIDS
Art. No. Article Material
Prosthetic planning kit
048.904 Soft Tissue Level PLAN Setcontents: 048.935V4, 048.936V4, 048.937V4,048.275V4, 048.276V4, 048.277V4,048.278V4, 048.279V4, 048.280V4,048.916V4, 048.917V4, 048.918V4,048.919V4, 048.920V4, 048.921V4,048.922V4, 048.923V4, 048.924V4,048.925V4, 048.926V4, 048.927V4,048.928V4, 048.929V4, 048.930V4,048.931V4, 048.932V4, 048.933V4,048.934V4, 048.283V4, 048.284V4,048.285V4, 048.286V4, 048.287V4,048.938V4, 048.939V4
PC
048.901 Prosthetic planning kitcontents: 6 x 048.920, 6 x 048.929,6 x 048.921, 6 x 048.916, 6 x 048.923,6 x 048.917, 6 x 048.918, 6 x 048.919,6 x 048.922, 6 x 048.924, 6 x 048.925,6 x 048.930, 6 x 048.931, 6 x 048.932,6 x 048.933, 6 x 048.934, 6 x 048.926,6 x 048.927, 6 x 048.928, 6 x 048.935,6 x 048.936, 6 x 048.937
PC
048.905 Soft Tissue Level PLAN Cassetteempty
PC
PRO
STH
ETICS
PROSTH
ETIC PLA
NN
ING
AID
S
90
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
048.929V4 RN synOcta® 1.5 PLAN abutment Height 1.5 mm POM
048.921V4 RN synOcta® Transversal PLANabutment
Height 4 mm POM
048.916V4 RN synOcta® 15° angled PLANabutmenttype A
Height 5.7 mm POM
048.917V4 RN synOcta® 15° angled PLANabutmenttype B
Height 5.7 mm POM
048.918V4 RN synOcta® 20° angled PLANabutmenttype A
Height 5.7 mm POM
048.919V4 RN synOcta® 20° angled PLANabutmenttype B
Height 5.7 mm POM
048.922V4 RN synOcta® 15° angled PLANabutmenttype A
Height 6.7 mm POM
048.923V4 RN synOcta® 15° angled PLANabutmenttype B
Height 6.7 mm POM
048.924V4 RN synOcta® 20° angled PLANabutmenttype A
Height 6.7 mm POM
048.925V4 RN synOcta® 20° angled PLANabutmenttype B
Height 6.7 mm POM
048.930V4 RN synOcta® Cementable PLANabutment
Height 5.5 mm POM
048.931V4 WN synOcta® 1.5 PLANabutment
Height 1.5 mm POM
048.932V4 WN synOcta® Cementable PLANabutment
Height 5.5 mm POM
048.933V4 WN synOcta® 15° angled PLANabutmenttype A
Height 5.5 mm POM
048.934V4 WN synOcta® 15° angled PLANabutmenttype B
Height 5.5 mm POM
048.943V4 NNC PLAN Cementableabutment, straight,for crown/bridge
Height 5.7 mm POM
048.944V4 NNC PLAN Cementableabutment, angled 15°,type A
Height 5.9 mm POM
PRO
STH
ETIC
SPR
OST
HET
IC P
LAN
NIN
G A
IDS
91
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
048.945V4 NNC PLAN Cementableabutment, angled 15°,type B
Height 5.9 mm POM
048.946V4 NNC PLAN Locator® Abutment Height 1 mm POM
048.947V4 NNC PLAN Locator® Abutment Height 2 mm POM
048.948V4 NNC PLAN Locator® Abutment Height 3 mm POM
048.949V4 NNC PLAN Locator® Abutment Height 4 mm POM
048.950V4 NNC PLAN Locator® Abutment Height 5 mm POM
048.951V4 NNC PLAN Locator® Abutment Height 6 mm POM
048.952V4 NNC PLAN Solid abutment Height 4 mm POM
048.953V4 NNC PLAN Solid abutment Height 5.5 mm POM
048.954V4 NNC PLAN Solid abutment Height 7 mm POM
048.926V4 RN PLAN Solid abutment Height 4 mm POM
048.927V4 RN PLAN Solid abutment Height 5.5 mm POM
048.928V4 RN PLAN Solid abutment Height 7 mm POM
048.275V4 RN PLAN LOCATOR® Abutment Height 1 mm POM
048.276V4 RN PLAN LOCATOR® Abutment Height 2 mm POM
048.277V4 RN PLAN LOCATOR® Abutment Height 3 mm POM
048.278V4 RN PLAN LOCATOR® Abutment Height 4 mm POM
048.279V4 RN PLAN LOCATOR® Abutment Height 5 mm POM
048.280V4 RN PLAN LOCATOR® Abutment Height 6 mm POM
048.938V4 WN PLAN Solid abutment 6° Height 4 mm POM
048.939V4 WN PLAN Solid abutment 6° Height 5.5 mm POM
PRO
STH
ETICS
PROSTH
ETIC PLA
NN
ING
AID
S
92
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
048.283V4 WN PLAN LOCATOR® Abutment Height 1 mm POM
048.284V4 WN PLAN LOCATOR® Abutment Height 2 mm POM
048.285V4 WN PLAN LOCATOR® Abutment Height 3 mm POM
048.286V4 WN PLAN LOCATOR® Abutment Height 4 mm POM
048.287V4 WN PLAN LOCATOR® Abutment Height 5 mm POM
048.935V4 NN PLAN coping Height 9 mm POM
048.936V4 NN angled PLAN coping 15° Height 8.8 mm POM
048.937V4 NN angled PLAN coping 20° Height 8.8 mm POM
ImportantThese prosthetic planning aids can be used in the mouth and are sterilizable up to 20 times.Take care to prevent aspiration in the patient by securing the PLAN abutment with the SCS screwdriver.
Straumann® CARES® CADCAM offers you a range of implant-borne prosthetic solutions in order to achieve high-quality dental implant restorations. Straumann® CARES® Implant-borne elements are designed for high reliability and predictability.
All implant-borne prosthetic solutions can be ordered via Straumann® CARES® Visual software. Straumann® CARES® Abutments may also be ordered via the Straumann® CARES® Scan & Shape service.
Straumann® CARES® AbutmentsFor customized patient solutions For cement-retained crowns and bridges via
mesostructure For screw-retained crowns (ceramic abutments only) Available in two different materials:
titanium and ceramic
Characteristics Customized shape and emergence profile Control over cement gap Proven Straumann precision fit
Straumann® CARES® Screw-retained bridges and barsFor complex customized patient solutions For screw-retained bridges For bars (Dolder®, MP-Clip, Ackermann, round) In two different materials: titanium grade 4 and cobalt-
chromium alloy (coron®)
Characteristics Direct connection to the implant, no additional
abutment needed High precision
PRO
STH
ETIC
SST
RAUM
ANN® C
ARES
® IMPLA
NT-BO
RNE P
ROST
HETIC
S
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
93
Straumann® CARES® Variobase coping To allow Straumann® dental restorations on competitive
implant systems By maintaining the genuine abutment-implant connection For dental restorations on Camlog® and NobelReplace™
implants Available in zerion™
Characteristics Customized shape and emergence profile Proven Straumann precision fit
Process description 1. For appropriate scanner and software compatibility
please ask your local Straumann sales representative.2. The model situation is scanned with the Straumann®
CARES® Scan CS2 scanner.3. The prosthetic part of the abutment is designed with
Straumann® CARES® Visual.4. The data generated is sent to the Straumann milling cen-
ter via the Straumann® CARES® Visual software or the Straumann® CARES® Webshop (for abutments only – http://cares.straumann.com).
5. The customized abutment is manufactured at the Straumann milling center.
6. Express delivery to the dental laboratory in just a few working days.
All final abutments are permanently screwed into the implant at 35 Ncm.
Straumann® CARES® Implant-borne prosthetics and Straumann® CARES® Scan & Shape service may not be available in your country.For further information please ask your local Straumann sales representative.
PRO
STH
ETICS
STRAUMANN® CARES ® IMPLANT-BORNE PROSTHETICS
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
94
PRO
STH
ETIC
SST
RAUM
ANN® C
ARES
® IMPLA
NT-BO
RNE P
ROST
HETIC
S
95
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Narrow Neck
048.353*048.353-04*
NN Occlusal screw(for ceramic only)
Length 5 mm TAN
049.177* NN Occlusal screwyellow
Length 5 mm,Thread Ø 1.8 mm
TAN
048.087048.087-04
NN Wax-up sleevefor single use
Length 15 mm PEEK
048.067 NN Straumann® Scanbodyincludes fixation screw, forStraumann® CARES® es1scanner and Straumann® CARES® Scan CS2scanner, for softwareversion CARES® Visual6.2 and lower
Length 9.2 mm PEEK/TAN
048.167 NN Straumann® CARES® Mono Scanbodyincludes fixation screw, forStraumann® CARES® ScanCS2 scanner, for softwareversion Straumann® CARES® Visual 6.2 andhigher
Length 9 mm PEEK/TAN
048.084V4 NN Scanbodyfor Sirona® System
Length 11.2 mm,Ø 3.5 mm
ABS
048.132 NN Repositionableimplant analogfor fully digital andconventional workflow
Length 18.5 mm Stainlesssteel
* = For individual ordering only in cases where the screw supplied is lost.
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETICS
STRAUMANN® CARES ® IMPLANT-BORNE PROSTHETICS
96
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Regular Neck
048.354*048.354V4*
RN Occlusal screw(for ceramic only)
Length 5 mm TAN
048.356* synOcta® basal screw Length 6.7 mm TAN
048.088048.088-04
RN Wax-up sleevefor single use
Length 19.3 mm PEEK
048.068 RN Straumann® Scanbodyincludes fixation screw, forStraumann® CARES® es1scanner and Straumann® CARES® Scan CS2scanner, for softwareversion CARES® Visual6.2 and lower
Length 8.5 mm PEEK/Ti
048.168 RN Straumann® CARES® Mono Scanbodyincludes fixation screw, forStraumann® CARES® ScanCS2 scanner, for softwareversion Straumann® CARES® Visual 6.2 andhigher
Length 9 mm PEEK/TAN
048.085V4 RN Scanbodyfor Sirona® System
Length 11.7 mm,Ø 4.8 mm
ABS
048.129 RN Repositionable implantanalogfor fully digital andconventional workflow
Length 17.6 mm Stainlesssteel
* = For individual ordering only in cases where the screw supplied is lost.
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETIC
SST
RAUM
ANN® C
ARES
® IMPLA
NT-BO
RNE P
ROST
HETIC
S
97
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Wide Neck
048.356* synOcta® basal screw Length 6.7 mm TAN
048.089048.089-04
WN Wax-up sleevefor single use
Length 16.4 mm PEEK
048.069 WN Straumann® Scanbodyincludes fixation screw, forStraumann® CARES® es1scanner and Straumann® CARES® Scan CS2scanner, for softwareversion CARES® Visual6.2 and lower
Length 8.9 mm PEEK/Ti
048.169 WN Straumann® CARES® Mono Scanbodyincludes fixation screw, forStraumann® CARES® ScanCS2 scanner, for softwareversion Straumann® CARES® Visual 6.2 andhigher
Length 9 mm PEEK/TAN
048.086V4 WN Scanbodyfor Sirona® System
Length 11.8 mm,Ø 6.5 mm
ABS
048.172 WN Repositionableimplant analogfor fully digital andconventional workflow
Length 17.8 mm Stainlesssteel
* = For individual ordering only in cases where the screw supplied is lost.
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETICS
STRAUMANN® CARES ® IMPLANT-BORNE PROSTHETICS
98
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSSOFT TISSUE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Wax-up kits
019.0063 Straumann® CARES® Wax-up kitcontains wax-up sleeveholders for Straumann® dental restorations onStraumann® implants
019.0050 Straumann® CARES® Wax-up kit for Camlog®
contains wax-up sleeveholders for Straumann® dental restorations onCamlog® implants
019.0051 Straumann® CARES® Wax-up kit for NobelReplace™contains wax-up sleeveholders for Straumann® dental restorations onNobelReplace™ implants
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
99
CROWNS AND BRIDGESNARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEMIMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.128 NNC Impression postfor open tray
Height 10.1 mm TAN
048.134 NNC Impression postfor closed tray
Height 10.9 mm POM/TAN
048.127 NNC Implant analog Length 12.5 mm Ti
Temporary restoration
048.501 NNC Postfor temporary restoration,for crown
Height 10.3 mm TAN
048.502 NNC Postfor temporary restoration,for bridge
Height 10.3 mm TAN
048.699 NNC Temporary AbutmentVITA CAD-Temp®
Temporary abutment
Height 10 mm PMMA/TAN
Auxiliary parts
048.313 NNC Basal screw Height 7.1 mm TAN
048.314 NNC Basal screwfor cementable abutment
Height 7.1 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
048.960V4 NNC Bite registration aid Height 8 mm POM
048.961V4 NNC Bite registration aid Height 12 mm POM
ImportantThe temporary abutment is screwed into the implant at 15–35 Ncm.
NNC prosthetic components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mmimplants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
100
CROWNS AND BRIDGESNARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEMCEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Cement-retained restorations
048.598 NNC Cementableabutmentstraight, for crown andbridge
Height 5.7 mm Ti
048.621 NNC Cementableabutmentangled 15°, type A
Height 5.9 mm Ti
048.622 NNC Cementableabutmentangled 15°, type B
Height 5.9 mm Ti
Burn-out copings
048.256 NNC Plastic copingfor cementable abutment,straight, for crown
Height 7 mm POM
048.257 NNC Plastic copingfor cementable abutment,straight, for bridge
Height 7 mm POM
048.258 NNC Plastic copingfor cementable abutment,angled 15°, for crownand bridge
Height 7.2 mm POM
Auxiliary parts
048.314 NNC Basal screwfor cementable abutment
Height 7.1 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantNNC Cementable abutments are permanently screwed into the implant at 35 Ncm.
NNC prosthetic components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mmimplants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
NNC Cementable angled 15° abutments are for cement-retained crowns and bridgesTwo types of NNC Cementable angled 15° abutments are available, Type A and Type B. This enables the axis to be corrected in 8 different alignments (in 45° graduations).
The NNC Cementable angled 15° abutments:Can undergo height adjustment, but a minimum height of 3 mm above the mucosa margin of the abutment must be maintained to ensure proper stability and retention of the restoration.Must not be cemented into the implant.Are permanently screwed into the implant at 35 Ncm; use a new basal screw for the final insertion of the abutment. Cannot be tightened/loosened with the extra short SCS Screwdriver.
Note1. Not suitable for direct ceramic veneering.2. The cement margin must not be more than 2 mm below
the mucosa.3. NNC components can only be used with Straumann®
Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please check with your local sales representative for more information.
A = angle between flat sides
B = angle to the flat wall
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
CROWNS AND BRIDGESNARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEMCEMENTABLE ABUTMENT, ANGLED 15°
101
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
102
CROWNS AND BRIDGESNARROW NECK CrossFit® Ø 3.5 mm PROSTHETIC SYSTEMGOLD ABUTMENT
Art. No. Article Dimensions Material
Screw-retained or cement-retained restorations
048.592 NNC Gold abutmentfor crown
Height 3.6 mm Ceramicor®/TAN/POM
048.593 NNC Gold abutmentfor bridge
Height 3.6 mm Ceramicor®/TAN/POM
Auxiliary parts
048.313 NNC Basal screw Height 7.1 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.
The NNC abutments are permanently screwed into the implant at 35 Ncm.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
103
CROWNS AND BRIDGESNARROW NECK Ø 3.5 mm PROSTHETIC SYSTEM
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.016 NN Impression capwith integral guide screw
Length 17.5 mm Al/TAN
048.122V4 NN Impression capsnap-on
Length 12 mm POM
048.130 NN Implant analog Length 14 mm Stainlesssteel
048.132 NN Repositionableimplant analogfor fully digital andconventional workflow
Length 18.5 mm Stainlesssteel
Components for temporary restoration
048.050 NN Protective capwith integral occlusalscrew
Height 3.4 mm PEEK/TAN
048.669 NN Temporary copingincludes NN Occlusalscrew
Height 10 mm PEEK/Ti
Screw-retained and cement-retained restorations
048.500 NN Framework blankcan be trimmed, for thedirect applicationof ceramic materials
Height 9 mm,Alloy weight 0.92 g
Esteticor® Cosmor H*
048.635 NN Gold copingcast-on
Height 10 mm,Alloy weight 0.28 g
Ceramicor®/POM
048.505 NN Copingcan be trimmed
Height 9 mm Ti
048.550 NN Coping15° angled
Height 8.8 mm Ti
048.551 NN Coping20° angled
Height 8.8 mm Ti
049.177** NN Occlusal screwyellow
Length 5 mm,Thread Ø 1.8 mm
TAN
* = Esteticor® Cosmor H is a bonding, non -cast-on alloy for direct veneering with ceramic.** = For individual ordering only in cases where the screw supplied is lost.
Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.
The NN Copings are permanently screwed onto the implant at 35 Ncm.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
104
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.017V4 RN Impression cap Height 8 mm POM
048.070V4 RN synOcta® Positioningcylinderred
Height 12 mm POM
048.010 RN synOcta® Impressionpostwith integral guide screw
Height 10 mm Al/Ti
048.090 RN synOcta® Impressionpostwith integral guide screw
Height 21 mm Al/Ti
048.124 RN synOcta® analoggray with red stripe
Length 12 mm Stainlesssteel
048.129 RN Repositionable implantanalogfor fully digital andconventional workflow
Length 17.6 mm Stainlesssteel
Bite registration
048.940V4 Bite registration aidshort
Height 8 mm,Ø 5 mm
POM
048.941V4 Bite registration aidlong
Height 12 mm,Ø 5 mm
POM
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
105
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
048.668 RN synOcta® TemporaryMeso abutmentincludes basal screw*
Length 10 mm PEEK/TAN
048.664 RN Temporary AbutmentVITA CAD-Temp®
Temporary abutment
Height 10 mm PMMA/TAN
048.356** synOcta® basal screw Length 6.7 mm TAN
048.650 RN synOcta® Postfor temporary restorationswith integral guide screw,bridge
Height 9 mm Ti
048.651 RN synOcta® Postfor temporary restorationswith integral guide screw,crown
Height 9 mm Ti
049.181 SCS Occlusal screwlong for screw-retaining ofguiding sleeves on anOcta, synOcta® or coneabutment 15°
Length 7.6 mm TAN
* = Available separately under Art. No. 048.356** = For individual ordering only in cases where the screw supplied is lost.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
106
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)1.5 ABUTMENT
Art. No. Article Dimensions Material
048.601 RN synOcta® 1.5 screw-retained abutment
Height 1.5 mm TAN
Screw-retained restorations
048.632 RN synOcta® Gold copingfor synOcta® 1.5 (includesmodeling aid), bridge
Height 4.25/12 mm,Alloy weight0.33 g
Ceramicor®/POM
048.633 RN synOcta® Gold copingfor synOcta® 1.5 (includesmodeling aid), crown
Height 4.25/12 mm,Alloy weight0.36 g
Ceramicor®/POM
048.227 RN synOcta® Plastic copingfor synOcta® 1.5, bridge/bar
Height 10 mm POM
048.229 RN synOcta® Plastic copingfor synOcta® 1.5, crown
Height 10 mm POM
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
Auxiliary parts
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.241 synOcta® Guide pinfor reamer 046.243, forsynOcta® 1.5 abutments
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.245 Polishing protectorfor RN synOcta® Copings,transocclusal screw-retained
Length 15 mm Stainlesssteel
046.239 Analog holder Length 105 mm Al/Steel
The RN synOcta® 1.5 abutment is permanently screwed into the implant at 35 Ncm.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
107
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)1.5 ABUTMENT
Art. No. Article Dimensions Material
Screw-retained or cement-retained restorations
048.571 RN synOcta® Meso millingcylinderfor synOcta® 1.5, crown
Height 10 mm,Ø 8 mm
Ti
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
048.642 RN synOcta® Goldabutmentcrown, (includes basalscrew 048.356)
Height 4.3 mm,Alloy weight 0.61 g
Ceramicor®/POM
048.356 synOcta® basal screw Length 6.7 mm TAN
The RN synOcta® 1.5 abutment is permanently screwed into the implant at 35 Ncm.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
108
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)1.5 ABUTMENT
Art. No. Article Dimensions Material
048.601 RN synOcta® 1.5 screw-retained abutment
Height 1.5 mm TAN
Tapered crowns and bridges of titanium
048.240 RN synOcta® Millingcylinderfor synOcta® 1.5, crown
Height 8 mm,Ø 6 mm
Ti
048.241 RN synOcta® Millingcylinderfor synOcta® 1.5, bridge
Height 8 mm,Ø 6 mm
Ti
048.362V4 SCS Guide screwfor 048.240/241,cannot be shortened
Length 8 mm Ti
048.363V4 SCS Guide screwfor 048.240/241, canbe shortened by 2 mm
Length 8 mm Ti
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
109
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
048.605 RN synOcta® Cementableabutment
Height 5.5 mm Ti
Cement-retained restorations
048.662 RN synOcta® Plasticcopingfor 048.605, bridge
Height 7 mm POM
048.663 RN synOcta® Plasticcopingfor 048.605, crown
Height 7 mm POM
Auxiliary parts
048.059V4 Transfer aidfor 048.605
Height 6.5 mm PC
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.246 Guide pinfor reamer 046.243, forsynOcta® 048.605
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
The RN synOcta® cementable abutment is permanently screwed into the implant at 35 Ncm.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
110
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)15° AND 20° ANGLED ABUTMENT
Art. No. Article Dimensions Material
048.612 RN synOcta® 15° angledabutmentshort, type A
Height 5.7 mm Ti/TAN
048.613 RN synOcta® 15° angledabutmentshort, type B
Height 5.7 mm Ti/TAN
048.617 RN synOcta® 20° angledabutmentshort, type A
Height 5.7 mm Ti/TAN
048.618 RN synOcta® 20° angledabutmentshort, type B
Height 5.7 mm Ti/TAN
048.610 RN synOcta® 15° angledabutmentlong, type A
Height 6.7 mm Ti/TAN
048.611 RN synOcta® 15° angledabutmentlong, type B
Height 6.7 mm Ti/TAN
048.615 RN synOcta® 20° angledabutmentlong, type A
Height 6.7 mm Ti/TAN
048.616 RN synOcta® 20° angledabutmentlong, type B
Height 6.7 mm Ti/TAN
Screw-retained or cement-retained restorations
048.670 Extension shellfor short and long RN synOcta® 15° and 20° angled abutments
Height 5.5 mm POM
048.676V4 Plastic shoulderfor short and long RN synOcta® 15° and 20° angled abutments
Height 4 mm POM
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
Auxiliary parts
048.000V4 Transfer aidfor RN synOcta® 15° and 20°angled abutments, short
Height 5.5 mm PC
048.002V4 Transfer aidfor RN synOcta® 15° and 20°angled abutments, long
Height 5.5 mm PC
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
RN synOcta® 15° and 20° angled abutments for screw-retained and cement-retained crowns and bridges
Important Due to their design, angled abutments must not be
trimmed orindividually modified. Abutments must not be cemented into the implant. In the case of the angled abutments, 2 types are
available for each angle. This enables the axis to be corrected in 16 different alignments.
The RN synOcta® angled abutments are permanently screwed into the implant at 35 Ncm.
Angled abutments must not be used with 15° angled hollow cylinder Straumann implants.
Angled abutments cannot be tightened/loosened with the extra short SCS Screwdriver.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with a Ø 4.8 mm Regular Neck.
A = angle to the edge
B = angle to the surface
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)
111
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
112
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)TRANSVERSAL (TS) ABUTMENT
Art. No. Article Dimensions Material
048.620 RN synOcta® Transversal(TS) screw-retainedabutment
Height 4 mm Ti
Screw-retained restorations
048.634 RN synOcta® TS goldcoping
Height 5.4 mm,Alloy weight 0.96 g
Ceramicor®
048.665 RN synOcta® TS plasticcoping
Height 5.4 mm,Alloy weight 0.21 g
Ceramicor®/POM
048.672 RN synOcta® TS threadprotection screwfor 048.634 and048.665
Length 8.2 mm,Ø 3 mm
Stainlesssteel
049.154 Transversal screwfor 048.620
Length 3 mm,Ø 2 mm
TAV
Auxiliary parts
046.420 TS Hexagonal screwdriver Length 24 mm Stainlesssteel
048.003V4 Transfer aidfor RN synOcta® TSabutment
Height 5 mm PC
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
044.570 Tapfor TS
M2 x 0.25 mm Stainlesssteel
046.239 Analog holder Length 105 mm Al/Steel
The RN synOcta® TS abutment is permanently screwed into the implant at 35 Ncm. The transversal screw is tightenedonly by hand.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
113
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.013 WN Impression cap Height 8 mm POM
048.095 WN synOcta® positioningcylinderwhite
Height 12 mm POM
048.091 WN synOcta® impressioncapwith integral guide screw
Height 10 mm Al
048.171 WN synOcta® analoggray
Length 12 mm Stainlesssteel
048.172 WN Repositionableimplant analogfor fully digital andconventional workflow
Length 17.8 mm Stainlesssteel
Bite registration
048.940V4 Bite registration aidshort
Height 8 mm,Ø 5 mm
POM
048.941V4 Bite registration aidlong
Height 12 mm,Ø 5 mm
POM
Temporary restoration
048.233 WN synOcta® Postfor temporary restorationswith integral guide screw,crown
Height 9 mm Ti
048.234 WN synOcta® Postfor temporary restorationswith integral guide screw,bridge
Height 9 mm Ti
049.181 SCS Occlusal screwlong for screw-retaining ofguiding sleeves on anOcta, synOcta® or coneabutment 15°
Length 7.6 mm TAN
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
114
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)1.5 ABUTMENT
Art. No. Article Dimensions Material
048.603 WN synOcta® 1.5 screw-retained abutment
Height 1.5 mm Ti
Screw-retained restorations
048.638 WN synOcta® Goldcopingfor synOcta® 1.5 (includesmodeling aid), bridge
Height 4.75/12 mm,Alloy weight 0.86 g
Ceramicor®/POM
048.639 WN synOcta® Goldcopingfor synOcta® 1.5 (includesmodeling aid), crown
Height 4.75/12 mm,Alloy weight 0.87 g
Ceramicor®/POM
048.666 WN synOcta® Plasticcopingbridge
Height 10 mm POM
048.667 WN synOcta® Plasticcopingcrown
Height 10 mm POM
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
Screw-retained or cement-retained restorations
048.644 WN synOcta® Goldabutmentcrown, (includes basalscrew 048.356)
Height 4.2 mm,Alloy weight 0.78 g
Ceramicor®/POM
048.573 WN synOcta® Mesomilling cylinderfor synOcta® 1.5, crown
Height 10 mm,Ø 10 mm
Ti
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
The WN synOcta® 1.5 abutment is permanently screwed into the implant at 35 Ncm.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
115
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)1.5 ABUTMENT
Art. No. Article Dimensions Material
Auxiliary parts
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.241 synOcta® Guide pinfor reamer 046.243, forsynOcta® 1.5 abutments
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
The WN synOcta® 1.5 abutment is permanently screwed into the implant at 35 Ncm.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
116
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
048.606 WN synOcta® cementable abutment
Height 5.5 mm Ti
Cement-retained restorations
048.243 WN synOcta® Plasticcopingfor 048.606, crown
Height 7.35 mm POM
048.244 WN synOcta® Plasticcopingfor 048.606, bridge
Height 7.35 mm POM
Auxiliary parts
048.054V4 Transfer aidfor 048.606
Height 6.5 mm PC
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.247 synOcta® Guide pinfor reamer 046.243, forsynOcta® 048.606
Length 50 mm Al/Ti
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
The WN synOcta® cementable abutment is permanently screwed into the implant at 35 Ncm.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
117
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)15° ANGLED ABUTMENT
Art. No. Article Dimensions Material
048.608 WN synOcta® 15°angled abutmenttype A
Height 5.5 mm Ti/TAN
048.609 WN synOcta® 15°angled abutmenttype B
Height 5.5 mm Ti/TAN
Cement-retained restorations
048.678 Plastic shoulderfor WN synOcta® 15°angled abutments
Height 4 mm POM
Auxiliary parts
048.032 Transfer aidfor WN synOcta® 15°angled abutments
Height 5 mm PC
Important Abutments must not be cemented into the implant. Two types of angled WN abutments are available.
This allows correction of the axis in 16 different directions. Angled abutments cannot be tightened/loosened with
the extra short SCS Screwdriver. The WN synOcta® angled abutments are screwed defini-
tively into the implant at 35 Ncm.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with a Ø 6.5 mm Wide Neck.
A = angle to the edge
B = angle to the surface
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
CROWNS AND BRIDGESsynOcta® PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)
118
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
119
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)
Art. No. Article Dimensions Material
048.547 NNC Solid abutmentyellow
Height 4 mm Ti
048.548 NNC Solid abutmentgray
Height 5.5 mm Ti
048.549 NNC Solid abutmentblue
Height 7 mm Ti
Auxiliary parts
048.155 NNC Solid abutmentdrivershort
Length 13 mm Stainlesssteel
048.156 NNC Solid abutmentdriverlong
Length 19 mm Stainlesssteel
NNC Solid abutments are permanently screwed into the implant at 35 Ncm and must not be removed after theimpression has been taken.
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
120
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.579 NNC Impression cap Height 8 mm POM
048.587 NNC Positioning cylinderfor 048.547, yellow
Height 10.2 mm POM
048.588 NNC Positioning cylinderfor 048.548, gray
Height 10.2 mm POM
048.589 NNC Positioning cylinderfor 048.549, blue
Height 10.2 mm POM
048.527 NNC Analogfor Solid abutment for048.547, yellow
Height 14.3 mm TAN
048.528 NNC Analogfor Solid abutment for048.548, gray
Height 15.8 mm TAN
048.529 NNC Analogfor Solid abutment for048.549, blue
Height 17.3 mm TAN
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
121
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)
Art. No. Article Dimensions Material
Temporary restoration
048.658 NNC Temporary copingfor Solid abutment, crown
Height 8.5 mm PMMA
048.659 NNC Temporary copingfor Solid abutment, bridge
Height 8.5 mm PMMA
048.700 NNC Protective capfor Solid abutment, for048.547
Height 5.6 mm PEEK
048.701 NNC Protective capfor Solid abutment, for048.548
Height 7.1 mm PEEK
048.702 NNC Protective capfor Solid abutment, for048.549
Height 8.6 mm PEEK
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
122
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (NARROW NECK CrossFit® Ø 3.5 mm)
Art. No. Article Dimensions Material
Components for cement-retained crowns and bridges
048.263 NNC Plastic copingfor Solid abutment, crown
Height 10.2 mm POM
048.264 NNC Plastic copingfor Solid abutment, bridge
Height 10.2 mm POM
Auxiliary parts
046.237 NNC Reamerfor 45° shoulder
Ø 8 mm Carbidemetal
046.249 NNC Guide pinfor reamer 046.237
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
123
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)
Art. No. Article Dimensions Material
All-in-One Sets
040.740 RN Solid All-in-One Setfor crown
Height 4 mm
040.741 RN Solid All-in-One Setfor crown
Height 5.5 mm
040.742 RN Solid All-in-One Setfor crown
Height 7 mm
040.840 RN Solid All-in-One Setfor bridge
Height 4 mm
040.841 RN Solid All-in-One Setfor bridge
Height 5.5 mm
040.842 RN Solid All-in-One Setfor bridge
Height 7 mm
048.540 RN Solid abutment 6°yellow
Height 4 mm Ti
048.541 RN Solid abutment 6°gray
Height 5.5 mm Ti
048.542 RN Solid abutment 6°blue
Height 7 mm Ti
Auxiliary parts
046.067 Solid abutment driverfor RN Solid abutments6°, short
Length 13 mm Stainlesssteel
046.068 Solid abutment driverfor RN Solid abutments6°, long
Length 19 mm Stainlesssteel
RN Solid abutments are permanently screwed into the implant at 35 Ncm and must not be removed after theimpression has been taken.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
124
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
048.017V4 RN Impression cap Height 8 mm POM
048.060V4 Positioning cylinderfor 048.540, yellow
Height 10.2 mm POM
048.061V4 Positioning cylinderfor 048.541, gray
Height 10.2 mm POM
048.062V4 Positioning cylinderfor 048.542, blue
Height 10.2 mm POM
048.160 Analogfor 048.540, yellow
Length 14.3 mm Al
048.161 Analogfor 048.541, gray
Length 15.8 mm Al
048.162 Analogfor 048.542, blue
Length 17.3 mm Al
048.117V4 Shoulder analogfor RN Solid abutments,with reinforcement pin
Length 10 mm,Length 17 mm
PPS/Brass
Temporary restoration
048.654 RN Temporary copingfor RN Solid abutments,bridge
Height 8.5 mm PMMA
048.655 RN Temporary copingfor RN Solid abutments,crown
Height 8.5 mm PMMA
048.047V4 RN Protective capfor 048.540, cementable
Height 5.8 mm PEEK
048.048V4 RN Protective capfor 048.541, cementable
Height 7.3 mm PEEK
048.049V4 RN Protective capfor 048.542, cementable
Height 8.8 mm PEEK
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
125
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (REGULAR NECK Ø 4.8 mm)
Art. No. Article Dimensions Material
Components for cement-retained crowns and bridges
048.245 Plastic copingfor RN Solid abutments,crown
Height 10 mm POM
048.246 Plastic copingfor RN Solid abutments,bridge
Height 10 mm POM
Auxiliary parts
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.242 Guide pinfor reamer 046.243, forRN Solid abutments
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
126
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)
Art. No. Article Dimensions Material
All-in-One Sets
040.845 WN Solid All-in-One Setfor bridge
Height 4 mm
040.846 WN Solid All-in-One Setfor bridge
Height 5.5 mm
040.745 WN Solid All-in-One Setfor crown
Height 4 mm
040.746 WN Solid All-in-One Setfor crown
Height 5.5 mm
048.545 WN Solid abutment 6°green
Height 4 mm Ti
048.546 WN Solid abutment 6°brown
Height 5.5 mm Ti
Impression taking and master cast fabrication
048.013 WN Impression cap Height 8 mm POM
048.065 Positioning cylinderfor 048.545, green
Height 10 mm POM
048.066 Positioning cylinderfor 048.546, brown
Height 10 mm POM
048.165 Analogfor 048.545, green
Length 16 mm Al
048.166 Analogfor 048.546, brown
Length 17.5 mm Al
048.140 Shoulder analogfor WN Solid abutments
Length 10 mm Al
The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 95) prior to impressiontaking, and tightened definitively at 35 Ncm. They must not be removed from the implant after the impression hasbeen taken.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
127
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)
Art. No. Article Dimensions Material
Temporary restoration
048.656 WN Temporary copingfor WN Solid abutments,bridge
Height 7.3 mm PMMA
048.657 WN Temporary copingfor WN Solid abutments,crown
Height 7.3 mm PMMA
048.242 WN Temporary AbutmentVITA CAD-Temp®
Temporary abutment
Height 10 mm PMMA/TAN
048.051 WN Protective capfor 048.545
Height 6 mm PEEK
048.052 WN Protective capfor 048.546
Height 7.5 mm PEEK
The WN Solid abutments are screwed into the implant with an SCS Screwdriver (see page 95) prior to impressiontaking, and tightened definitively at 35 Ncm. They must not be removed from the implant after the impression hasbeen taken.
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
128
CROWNS AND BRIDGESSOLID ABUTMENT PROSTHETIC SYSTEM (WIDE NECK Ø 6.5 mm)
Art. No. Article Dimensions Material
Components for cement-retained crowns and bridges
048.247 Plastic copingfor WN Solid abutments,crown
Height 7 mm POM
048.248 Plastic copingfor WN Solid abutments,bridge
Height 7 mm POM
Auxiliary parts
046.243 Reamerfor 45° shoulders
Ø 8 mm Carbidemetal
046.244 Guide pinfor reamer 046.243, forWN Solid abutments
Length 50 mm Stainlesssteel
046.240 Handlefor reamers and tap for TS
Length 65 mm Steel/Brass
046.239 Analog holder Length 105 mm Al/Steel
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
129
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)BAR
Art. No. Article Dimensions Material
048.601 RN synOcta® 1.5 screw-retained abutment
Height 1.5 mm TAN
Components for gold bars
048.204 RN synOcta® Gold copingfor synOcta® 1.5, bar
Height 5.8 mm,Alloy weight 0.77 g
Ceramicor®
048.411 Dolder® baregg-shaped cross-section,mini
Length 25 mm,Height 2.3 mm
Elitor®
048.412 Dolder® baregg-shaped cross-section,regular
Length 25 mm,Height 3 mm
Elitor®
048.413 Dolder® bar matrixincludes spacer, mini
Length 25 mm,Height 2.75 mm
Elitor®/Brass
048.414 Dolder® bar matrixincludes spacer, regular
Length 25 mm,Height 3.5 mm
Elitor®/Brass
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
040.195 Bar set goldincludes:2 x RN synOcta® 1.5abutment, 048.6012 x RN synOcta® analog,048.1242 x RN synOcta® goldcoping, bar, 048.2044 x SCS Occlusal screw,048.350
For matching guide screws see page 169.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
130
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)BAR
Art. No. Article Dimensions Material
Auxiliary parts
048.208V4 Stabilization pin forretaining gold copings insolder investment
Length 11 mm Stainlesssteel
046.150 Activator setfor all bar matrices, three-part
Length 50 mm Stainlesssteel
046.151 Deactivatorfor Dolder® bar matrices,mini
Length 66 mm Grilon BS/Brass
046.152 Deactivatorfor Dolder® bar matrices,regular
Length 66 mm Grilon BS/Brass
For matching guide screws see page 169.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
131
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)BAR
Art. No. Article Dimensions Material
048.601 RN synOcta® 1.5 screw-retained abutment
Height 1.5 mm TAN
Components for titanium bars, prefabricated titanium parts for laser welding
048.214 RN synOcta® Titaniumcopingfor synOcta® 1.5, bar
Height 6 mm Ti
048.466 Titanium baregg-shaped cross-section,mini
Length 50 mm,Height 2.3 mm
Ti
048.465 Titanium baregg-shaped cross-section,regular
Length 50 mm,Height 3 mm
Ti
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
040.196 Bar set titaniumincludes:2 x RN synOcta® 1.5abutment, 048.6012 x RN synOcta® analog,048.1242 x RN synOcta® titaniumcoping, bar, 048.2142 x SCS Occlusal screw,048.350
For matching guide screws see page 169.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
132
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)BAR
Art. No. Article Dimensions Material
Plastic components for one-piece casting method for bars
048.227 RN synOcta® Plasticcopingfor synOcta® 1.5,bridge/bar
Height 10 mm POM
048.461 Plastic baregg-shaped cross-section,mini
Length 80 mm,Height 2.3 mm
PMMA
048.460 Plastic baregg-shaped cross-section,regular
Length 80 mm,Height 3 mm
PMMA
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
040.197 Bar set plasticincludes:2 x RN synOcta® 1.5abutment, 048.6012 x RN synOcta® analog,048.1242 x RN synOcta® plasticcoping, bar, 048.227 2 x SCS Occlusal screw,048.350
For matching guide screws see page 169.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
133
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)BAR
Art. No. Article Dimensions Material
Auxiliary parts
046.245 Polishing protectorfor RN synOcta® Copings,transocclusal screw-retained
Length 15 mm Stainlesssteel
048.108 RN synOcta® Analogfor bars with 048.601, one-part
Length 11.5 mm Stainlesssteel
048.093V4 RN synOcta® Impression capfor bars with 048.601, one-part, gray
Height 5 mm POM
048.073V4 Fixation pinfor bars with 048.601, gray
Length 5 mm POM
046.239 Analog holder Length 105 mm Al/Steel
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
134
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)RETENTIVE ANCHOR
Art. No. Article Dimensions Material
048.439 Retentive anchor abutment Height 3.4 mm Ti
046.069 Retentive anchor driver Length 19 mm Stainlesssteel
048.109 Transfer pinfor retentive anchor
Length 18 mm Stainlesssteel
Elliptical matrix
048.456 Elliptical matrixincludes lamella retentioninsert
Height 3.2 mm,Ø 3.6 mm
Elitor®/Ti
048.457 Spare lamella retentioninsert
Height 2.6 mm Elitor®
046.154 Screwdriver Length 37 mm Stainlesssteel
Titanium matrix with defined retention force
048.450 Titanium matrixfor retentive anchor
Height 3.1 mm Ti alloy
048.451V4 Spacerfor titanium matrix
Height 3.5 mm POM
048.452 Screwdriverfor titanium matrix
Length 50 mm Stainlesssteel
048.453 Extractorfor titanium matrix
Length 100 mm Stainlesssteel
048.454V4 Threaded mounting ringfor titanium matrix
Height 2.2 mm POM
048.455V4 Springfor 048.450
Stainlesssteel
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
135
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)STECO® TITANMAGNETICS®
Art. No. Article Dimensions Material
048.511 Titanmagnetics® insert(abutment)
Height 3.25 mm,Ø 4.8 mm
Ti housing
046.146 Titanmagnetics® Insertapplicator (driver)for ratchet
Length 18 mm Ti housing
048.014 Titanmagnetics® impression coping
Height 7 mm Ti housing
048.121 Titanmagnetics® modelimplant
Length 9 mm Ti housing
048.516 Positioning cuff Height 0.3 mm,Ø 15 mm
Dentalsilicone
048.515 Titanmagnetics® denturemagnet
Height 2.7 mm,Ø 4.8 mm
Ti housing
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
The Titanmagnetics® insert is screwed into the implant at 15–20 Ncm.
0197Manufacturersteco®-system-technik GmbH & Co. KGKollaustrasse 6D-22529 HamburgGermany
PRO
STH
ETICS
HYBRID DENTURES (NARROW NECK CrossFit ® Ø 3.5 mm)
136
HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® abutments
048.581 NNC LOCATOR® Abutment
Height 1 mm TAV
048.582 NNC LOCATOR® Abutment
Height 2 mm TAV
048.583 NNC LOCATOR® Abutment
Height 3 mm TAV
048.584 NNC LOCATOR® Abutment
Height 4 mm TAV
048.585 NNC LOCATOR® Abutment
Height 5 mm TAV
048.586 NNC LOCATOR® Abutment
Height 6 mm TAV
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
NoteNNC products may not be available in all countries, subject to regulatory approval and market release. Please checkwith your local Straumann sales representative for more information.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DENT
URES
(NAR
ROW
NEC
K Cros
sFit® Ø
3.5 m
m)
137
HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.189V2 LOCATOR® Male processingpackagecontents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),clear replacement male(048.190),pink replacement male(048.191),blue replacement male(048.192)
Ti/Nylon
048.190V4 LOCATOR® Replacement maleclear, 0°–10°•, 5 lbs, 2.27kg••
Height 1.7 mm Nylon
048.191V4 LOCATOR® Replacement malepink, light retention, 0°–10°•,3 lbs, 1.36 kg••
Height 1.7 mm Nylon
048.192V4 LOCATOR® Replacement maleblue, extra-light retention,0°–10°•,1.5 lbs, 0.68 kg••
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID DENTURES (NARROW NECK CrossFit ® Ø 3.5 mm)
138
HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.182V2 LOCATOR® Male processingpackageextended range, contents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),green replacement male(048.193),orange replacement male(048.188),red replacement male(048.194)
Ti/Nylon
048.193V4 LOCATOR® Replacement malegreen, extended range,10°–20°•,4 lbs, 1.82 kg••
Height 1.7 mm Nylon
048.188V4 LOCATOR® Replacement maleorange, light retention,extended range, 10°–20°•,2 lbs, 0.91 kg••
Height 1.7 mm Nylon
048.194V4 LOCATOR® Replacement malered, extra-light retention,extendedrange, 10°–20°•, 1 lbs, 0.45kg••
Height 1.7 mm Nylon
048.181V4 LOCATOR® Replacement malegray, zero (0) retention
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DENT
URES
(NAR
ROW
NEC
K Cros
sFit® Ø
3.5 m
m)
139
HYBRID DENTURES (NARROW NECK CrossFit® Ø 3.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.198V4 LOCATOR® Femaleanalog
Length 10 mm,Ø 5 mm
Al
048.197V4 LOCATOR® Impressioncoping
Height 4 mm Al housingwith LDPEinsert
048.196V20 LOCATOR® Block-outspacer
Thickness 0.4 mm Siliconerubber
048.195V4 LOCATOR® Blackprocessing male
Height 1.9 mm LDPE
048.218V4 LOCATOR® Processingspacer
POM
046.413V4 LOCATOR® Abutmentholder sleeve
PSU
Auxiliary parts
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
048.199V4 LOCATOR® Parallel post Length 8 mm LDPE
048.200 LOCATOR® Anglemeasurement guide
Length 50 mm,Width 15 mm
Stainlesssteel
ImportantNNC components can only be used with Straumann® Standard Plus Narrow Neck CrossFit® Ø 3.5 mm implants.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
140
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® abutments
048.175 RN LOCATOR® Abutment Height 1 mm TAV
048.176 RN LOCATOR® Abutment Height 2 mm TAV
048.177 RN LOCATOR® Abutment Height 3 mm TAV
048.178 RN LOCATOR® Abutment Height 4 mm TAV
048.179 RN LOCATOR® Abutment Height 5 mm TAV
048.180 RN LOCATOR® Abutment Height 6 mm TAV
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
141
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.189V2 LOCATOR® Male processingpackagecontents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),clear replacement male(048.190),pink replacement male(048.191),blue replacement male(048.192)
Ti/Nylon
048.190V4 LOCATOR® Replacement maleclear, 0°–10°•, 5 lbs, 2.27kg••
Height 1.7 mm Nylon
048.191V4 LOCATOR® Replacement malepink, light retention, 0°–10°•,3 lbs, 1.36 kg••
Height 1.7 mm Nylon
048.192V4 LOCATOR® Replacement maleblue, extra-light retention,0°–10°•,1.5 lbs, 0.68 kg••
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
142
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.182V2 LOCATOR® Male processingpackageextended range, contents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),green replacement male(048.193),orange replacement male(048.188),red replacement male(048.194)
Ti/Nylon
048.193V4 LOCATOR® Replacement malegreen, extended range,10°–20°•,4 lbs, 1.82 kg••
Height 1.7 mm Nylon
048.188V4 LOCATOR® Replacement maleorange, light retention,extended range, 10°–20°•,2 lbs, 0.91 kg••
Height 1.7 mm Nylon
048.194V4 LOCATOR® Replacement malered, extra-light retention,extendedrange, 10°–20°•, 1 lbs, 0.45kg••
Height 1.7 mm Nylon
048.181V4 LOCATOR® Replacement malegray, zero (0) retention
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
143
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR® AND SFI-ANCHOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.198V4 LOCATOR® Femaleanalog
Length 10 mm,Ø 5 mm
Al
048.197V4 LOCATOR® Impressioncoping
Height 4 mm Al housingwith LDPEinsert
048.196V20 LOCATOR® Block-outspacer
Thickness 0.4 mm Siliconerubber
048.195V4 LOCATOR® Blackprocessing male
Height 1.9 mm LDPE
048.218V4 LOCATOR® Processingspacer
POM
046.413V4 LOCATOR® Abutmentholder sleeve
PSU
Auxiliary parts
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
048.199V4 LOCATOR® Parallel post Length 8 mm LDPE
048.200 LOCATOR® Anglemeasurement guide
Length 50 mm,Width 15 mm
Stainlesssteel
045.025 CD20 SFI-Anchor® Abutment, Div. 20°
Height 2 mm,Ø 5.3 mm
Titaniumgrade 5
045.026 RN SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 1 mm Titaniumgrade 5/POM
045.027 RN SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 2 mm Titaniumgrade 5/POM
045.028 RN SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 3 mm Titaniumgrade 5/POM
PRO
STH
ETICS
HYBRID DENTURES (REGULAR N
ECK Ø 4.8 mm)
144
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR® AND SFI-ANCHOR®
Art. No. Article Dimensions Material
045.029 RN SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 4 mm Titaniumgrade 5/POM
045.030 RN SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 5 mm Titaniumgrade 5/POM
045.031 RN SFI-Anchor® Abutment,Div. 20°
Height 1 mm Titaniumgrade 5
045.032 RN SFI-Anchor® Abutment,Div. 20°
Height 2 mm Titaniumgrade 5
045.033 RN SFI-Anchor® Abutment,Div. 20°
Height 3 mm Titaniumgrade 5
045.034 RN SFI-Anchor® Abutment,Div. 20°
Height 4 mm Titaniumgrade 5
045.035 RN SFI-Anchor® Abutment,Div. 20°
Height 5 mm Titaniumgrade 5
045.046V2 SFI-Anchor® Basic set2x Retention insert extra-low, low, medium, 2xHousing, 2x Block-outspacer
045.047V4 SFI-Anchor® Retentioninsert, extra-low
Pekkton®
045.048V4 SFI-Anchor® Retentioninsert, low
Pekkton®
045.049V4 SFI-Anchor® Retentioninsert, medium
Pekkton®
045.050V4 SFI-Anchor® Retentioninsert, strong
Pekkton®
045.051 SFI-Anchor® Retentioninsert, Elitor®
Elitor®
045.052V4 SFI-Anchor® Spacerfor use in the dental lab
POM
045.053V4 SFI-Anchor® Block-outspacerfor use in the dental office
Silicone
045.054V4 SFI-Anchor® Impressionpart
POM
045.055V4 SFI-Anchor® Analog Titaniumgrade 5
045.056 SFI-Anchor® Abutmentplanner
POM
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (RE
GULA
R N
ECK
Ø 4
.8 m
m)
145
HYBRID DENTURES (REGULAR NECK Ø 4.8 mm)LOCATOR® AND SFI-ANCHOR®
Art. No. Article Dimensions Material
045.057 SFI-Anchor® Aligner POM
045.058 SFI-Anchor® Tool Titaniumgrade 5
045.059 SFI-Anchor® Screwdriver Sandvik
045.060 SFI-Anchor® Instrument set4x Impression part, 4xAnalog, 1x Abutmentplanner, 1x Aligner, 1xTool, 1x Screwdriver
045.061V4 SFI-Anchor® Housing Titaniumgrade 5
SFI-Anchor® is designed and manufactured by Cendres+Métaux and is exclusively distributed by lnstitut StraumannAG, Basel.
ImportantRN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 4.8 mm Regular Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
ManufacturerCendres+Métaux SARue de Boujean 122CH-2501 Biel(Suisse).
PRO
STH
ETICS
HYBRID DENTURES (W
IDE NECK Ø
6.5 mm)
146
HYBRID DENTURES (WIDE NECK Ø 6.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® abutments
048.183 WN LOCATOR® Abutment Height 1 mm TAV
048.184 WN LOCATOR® Abutment Height 2 mm TAV
048.185 WN LOCATOR® Abutment Height 3 mm TAV
048.186 WN LOCATOR® Abutment Height 4 mm TAV
048.187 WN LOCATOR® Abutment Height 5 mm TAV
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (W
IDE
NEC
K Ø
6.5
mm)
147
HYBRID DENTURES (WIDE NECK Ø 6.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.189V2 LOCATOR® Male processingpackagecontents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),clear replacement male(048.190),pink replacement male(048.191),blue replacement male(048.192)
Ti/Nylon
048.190V4 LOCATOR® Replacement maleclear, 0°–10°•, 5 lbs, 2.27kg••
Height 1.7 mm Nylon
048.191V4 LOCATOR® Replacement malepink, light retention, 0°–10°•,3 lbs, 1.36 kg••
Height 1.7 mm Nylon
048.192V4 LOCATOR® Replacement maleblue, extra-light retention,0°–10°•,1.5 lbs, 0.68 kg••
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID DENTURES (W
IDE NECK Ø
6.5 mm)
148
HYBRID DENTURES (WIDE NECK Ø 6.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.182V2 LOCATOR® Male processingpackageextended range, contents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),green replacement male(048.193),orange replacement male(048.188),red replacement male(048.194)
Ti/Nylon
048.193V4 LOCATOR® Replacement malegreen, extended range,10°–20°•,4 lbs, 1.82 kg••
Height 1.7 mm Nylon
048.188V4 LOCATOR® Replacement maleorange, light retention,extended range, 10°–20°•,2 lbs, 0.91 kg••
Height 1.7 mm Nylon
048.194V4 LOCATOR® Replacement malered, extra-light retention,extendedrange, 10°–20°•, 1 lbs, 0.45kg••
Height 1.7 mm Nylon
048.181V4 LOCATOR® Replacement malegray, zero (0) retention
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SHY
BRID
DEN
TURE
S (W
IDE
NEC
K Ø
6.5
mm)
149
HYBRID DENTURES (WIDE NECK Ø 6.5 mm)LOCATOR®
Art. No. Article Dimensions Material
LOCATOR® components
048.198V4 LOCATOR® Femaleanalog
Length 10 mm,Ø 5 mm
Al
048.197V4 LOCATOR® Impressioncoping
Height 4 mm Al housingwith LDPEinsert
048.196V20 LOCATOR® Block-outspacer
Thickness 0.4 mm Siliconerubber
048.195V4 LOCATOR® Blackprocessing male
Height 1.9 mm LDPE
048.218V4 LOCATOR® Processingspacer
POM
046.413V4 LOCATOR® Abutmentholder sleeve
PSU
Auxiliary parts
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
048.199V4 LOCATOR® Parallel post Length 8 mm LDPE
048.200 LOCATOR® Anglemeasurement guide
Length 50 mm,Width 15 mm
Stainlesssteel
ImportantWN components can only be used with Straumann® Standard, Standard Plus and Tapered Effect implants with aØ 6.5 mm Wide Neck.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
AU
XILIARY PA
RTS
150
AUXILIARY PARTS
Art. No. Article Dimensions Material
SCS occlusal and guide screws
048.350048.350V4
SCS Occlusal screw,short for screw-retaining ofguiding sleeves on a coneabutment 6° or 8° and onmonotype implants
Length 4 mm Ti
048.360V4 SCS Guide screwfor RN synOcta® barcopings, cannot beshortened
Length 6 mm Ti
048.361V4 SCS Guide screwfor RN synOcta® barcopings, can be shortenedby 1.6 mm
Length 6 mm Ti
048.362V4 SCS Guide screwfor 048.240/241,cannot be shortened
Length 8 mm Ti
048.363V4 SCS Guide screwfor 048.240/241, canbe shortened by 2 mm
Length 8 mm Ti
048.364V4 SCS Guide screwcan be shortened by2 mm
Length 10 mm Ti
048.365V4 SCS Guide screwcan be shortened by2 mm
Length 12 mm Ti
048.366V4 SCS Guide screwcan be shortened by2 mm
Length 14 mm Ti
PRO
STH
ETIC
SPR
OST
HET
IC P
LAN
NIN
G A
IDS
151
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN set
026.0101 Bone Level PLAN set* Length 278 mm,Width 124 mm,Height 33 mm
PC/POM
026.0102 Bone Level PLAN cassetteempty
Length 278 mm,Width 124 mm,Height 33 mm
PC
PLAN abutments
025.2601-04 NC PLAN Anatomicabutmentstraight
Gingiva height 2 mm POM
025.2602-04 NC PLAN Anatomicabutmentstraight
Gingiva height3.5 mm
POM
025.2603-04 NC PLAN Anatomicabutmentangled 15°
Gingiva height 2 mm POM
025.2604-04 NC PLAN Anatomicabutmentangled 15°
Gingiva height3.5 mm
POM
025.4601-04 RC PLAN Anatomic abutmentstraight
Gingiva height 2 mm POM
025.4602-04 RC PLAN Anatomic abutmentstraight
Gingiva height3.5 mm
POM
025.4603-04 RC PLAN Anatomic abutmentangled 15°
Gingiva height 2 mm POM
025.4604-04 RC PLAN Anatomic abutmentangled 15°
Gingiva height3.5 mm
POM
025.2610-04 NC PLAN Gold abutmentfor crown
Height 3.2 mm POM
025.4610-04 RC PLAN Gold abutmentfor crown
Height 3.3 mm POM
025.4630-04 RC PLAN Gold abutmentfor bridge
Height 5.2 mm POM
* = Contains all PLAN abutments
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
PRO
STH
ETICS
PROSTH
ETIC PLA
NN
ING
AID
S
152
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
025.2611-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 1 mm,Abutment height 4 mm
POM
025.2612-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 2 mm,Abutment height 4 mm
POM
025.2613-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 3 mm,Abutment height 4 mm
POM
025.2615-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
POM
025.2616-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
POM
025.2617-04 NC PLANCementableabutment
Ø 3.5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
POM
025.2621-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 4 mm
POM
025.2622-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 4 mm
POM
025.2623-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 4 mm
POM
025.2625-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
POM
025.2626-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
POM
025.2627-04 NC PLANCementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
POM
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
PRO
STH
ETIC
SPR
OST
HET
IC P
LAN
NIN
G A
IDS
153
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
025.4621-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 4 mm
POM
025.4622-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 4 mm
POM
025.4623-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 4 mm
POM
025.4625-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
POM
025.4626-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
POM
025.4627-04 RC PLANCementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
POM
025.4631-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 1 mm,Abutment height 4 mm
POM
025.4632-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 2 mm,Abutment height 4 mm
POM
025.4633-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 3 mm,Abutment height 4 mm
POM
025.4635-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
POM
025.4636-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
POM
025.4637-04 RC PLANCementableabutment
Ø 6.5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
POM
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
PRO
STH
ETICS
PROSTH
ETIC PLA
NN
ING
AID
S
154
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
025.2651-04 NC PLAN Multi-baseabutmentstraight
Ø 3.5 mm,Gingiva height 1 mm
POM
025.2652-04 NC PLAN Multi-baseabutmentstraight
Ø 3.5 mm,Gingiva height 2.5 mm
POM
025.2654-04 NC PLAN Multi-baseabutmentstraight
Ø 3.5 mm,Gingiva height 4 mm
POM
025.2656-04 NC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
POM
025.2657-04 NC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 2.5 mm
POM
025.2659-04 NC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
POM
025.2662-04 NC PLAN Multi-baseabutmentangled 25°, type A
Ø 4 mm,Gingiva height 2.5 mm
POM
025.2665-04 NC PLAN Multi-baseabutmentangled 25°, type B
Ø 4 mm,Gingiva height 2.5 mm
POM
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
PRO
STH
ETIC
SPR
OST
HET
IC P
LAN
NIN
G A
IDS
155
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
025.4651-04 RC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
POM
025.4652-04 RC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 2.5 mm
POM
025.4654-04 RC PLAN Multi-baseabutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
POM
025.4656-04 RC PLAN Multi-baseabutmentstraight
Ø 6.5 mm,Gingiva height 1 mm
POM
025.4657-04 RC PLAN Multi-baseabutmentstraight
Ø 6.5 mm,Gingiva height 2.5 mm
POM
025.4659-04 RC PLAN Multi-baseabutmentstraight
Ø 6.5 mm,Gingiva height 4 mm
POM
025.4662-04 RC PLAN Multi-baseabutmentangled 25°, type A
Ø 4 mm,Gingiva height 2.5 mm
POM
025.4665-04 RC PLAN Multi-baseabutmentangled 25°, type B
Ø 4 mm,Gingiva height 2.5 mm
POM
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
PRO
STH
ETICS
PROSTH
ETIC PLA
NN
ING
AID
S
156
PROSTHETIC PLANNING AIDS
Art. No. Article Dimensions Material
PLAN abutments
025.2642-04 NC PLAN LOCATOR® Abutment
Height 2 mm POM
025.2643-04 NC PLAN LOCATOR® Abutment
Height 3 mm POM
025.2644-04 NC PLAN LOCATOR® Abutment
Height 4 mm POM
025.2645-04 NC PLAN LOCATOR® Abutment
Height 5 mm POM
025.2646-04 NC PLAN LOCATOR® Abutment
Height 6 mm POM
025.4641-04 RC PLAN LOCATOR® Abutment
Height 1 mm POM
025.4642-04 RC PLAN LOCATOR® Abutment
Height 2 mm POM
025.4643-04 RC PLAN LOCATOR® Abutment
Height 3 mm POM
025.4644-04 RC PLAN LOCATOR® Abutment
Height 4 mm POM
025.4645-04 RC PLAN LOCATOR® Abutment
Height 5 mm POM
025.4646-04 RC PLAN LOCATOR® Abutment
Height 6 mm POM
ImportantPLAN abutments must be cleaned and sterilized with moist heat at 134 °C (273 °F) for 18 min after intraoral use.
Straumann® CARES® CADCAM offers you a range of implant-borne prosthetic solutions in order to achieve high-quality dental implant restorations. Straumann® CARES® Implant-borne elements are designed for high reliability and predictability.
All implant-borne prosthetic solutions can be ordered via Straumann® CARES® Visual software. Straumann® CARES® Abutments may also be ordered via the Straumann® CARES® Scan & Shape service.
Straumann® CARES® AbutmentsFor customized patient solutions For cement-retained crowns and bridges via
mesostructure For screw-retained crowns (ceramic abutments only) Available in two different materials:
titanium and ceramic
Characteristics Customized shape and emergence profile Control over cement gap Proven Straumann precision fit
Straumann® CARES® Screw-retained bridges and barsFor complex customized patient solutions For screw-retained bridges For bars (Dolder®, MP-Clip, Ackermann, round) In two different materials: titanium grade 4 and cobalt-
chromium alloy (coron®)
Characteristics Direct connection to the implant, no additional
abutment needed High precision
Straumann® CARES® Variobase coping To allow Straumann® dental restorations on competitive
implant systems. By maintaining the genuine abutment-implant connection. For dental restorations on Camlog® and NobelReplace™
implants Available in zerion™
Characteristics Customized shape and emergence profile Proven Straumann precision fit
PRO
STH
ETIC
SST
RAUM
ANN® C
ARES
® IMPLA
NT-BO
RNE P
ROST
HETIC
S
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSBONE LEVELCUSTOMIZED IMPLANT PROSTHETICS
157
All final abutments are permanently screwed into the implant at 35 Ncm.
Straumann® CARES® Implant-borne prosthetics and Straumann® CARES® Scan & Shape service may not be available in your country.For further information please ask your local Straumann sales representative.
Process description 1. For appropriate scanner and software compatibility
please ask your local Straumann sales representative.2. The model situation is scanned with the Straumann®
CARES® Scan CS2 scanner.3. The prosthetic part of the abutment is designed with
Straumann® CARES® Visual.4. The data generated is sent to the Straumann milling
center via the Straumann® CARES® Visual software or the Straumann® CARES® Webshop (for abutments only – http://cares.straumann.com).
5. The customized abutment is manufactured at the Straumann milling center.
6. Express delivery to the dental laboratory in just a few working days.
PRO
STH
ETICS
STRAUMANN® CARES ® IMPLANT-BORNE PROSTHETICS
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSBONE LEVELCUSTOMIZED IMPLANT PROSTHETICS
158
PRO
STH
ETIC
SST
RAUM
ANN® C
ARES
® IMPLA
NT-BO
RNE P
ROST
HETIC
S
159
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSBONE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Narrow CrossFit®
025.2900 NC Basal screw Length 7.9 mm TAN
025.2926 NC/RC SRBB Bone Levelscrew
Length 7.9 mm TAN
025.2906 NC Basal screwfor ceramic abutment only
Length 8.9 mm TAN
025.2903025.2903-04
NC Wax-up sleevefor single use
Length 15.2 mm PEEK
025.2905 NC Straumann® Scanbodyincludes fixation screw, forStraumann® CARES® es1scanner and Straumann® CARES® Scan CS2 scanner,for software version CARES® Visual 6.2 and lower
Length 11.7 mm PEEK/TAN
025.2915 NC Straumann® CARES® Mono Scanbodyincludes fixation screw, forStraumann® CARES® ScanCS2 scanner, for softwareversion Straumann® CARES® Visual 6.2 and higher
Length 9 mm PEEK/TAN
025.2901-04 NC Scanbodyfor Sirona® System
Length 13.3 mm PEEK/ABS
025.2102 NC Repositionable implantanalogfor fully digital andconventional workflow
Length 17 mm Stainlesssteel
Regular CrossFit®
025.4900 RC Basal screw Length 7.9 mm TAN
025.2926 NC/RC SRBB Bone Levelscrew
Length 7.9 mm TAN
025.4906 RC Basal screwfor ceramic abutment only
Length 8.2 mm TAN
025.4903025.4903-04
RC Wax-up sleevefor single use
Length 18.8 mm PEEK
All final abutments are permanently screwed into the implant at 35 Ncm.
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETICS
STRAUMANN® CARES ® IMPLANT-BORNE PROSTHETICS
160
STRAUMANN® CARES® IMPLANT-BORNE PROSTHETICSBONE LEVELCUSTOMIZED IMPLANT PROSTHETICS
Art. No. Article Dimensions Material
Regular CrossFit®
025.4905 RC Straumann® Scanbodyincludes fixation screw, forStraumann® CARES® es1scanner and Straumann® CARES® Scan CS2 scanner,for software version CARES® Visual 6.2 and lower
Length 13.4 mm PEEK/TAN
025.4915 RC Straumann® CARES® Mono Scanbodyincludes fixation screw, forStraumann® CARES® ScanCS2 scanner, for softwareversion Straumann® CARES® Visual 6.2 and higher
Length 9 mm PEEK/TAN
025.4901-04 RC Scanbodyfor Sirona® System
Length 13.3 mm PEEK/ABS
025.4102 RC Repositionable implantanalogfor fully digital andconventional workflow
Length 17 mm Stainlesssteel
Wax-up kits
019.0063 Straumann® CARES® Wax-upkitcontains wax-up sleeveholders for Straumann® dental restorations onStraumann® implants
019.0050 Straumann® CARES® Wax-upkit for Camlog®
contains wax-up sleeveholders for Straumann® dental restorations onCamlog® implants
019.0051 Straumann® CARES® Wax-upkit for NobelReplace™contains wax-up sleeveholders for Straumann® dental restorations onNobelReplace™ implants
All final abutments are permanently screwed into the implant at 35 Ncm.
For further information and the webshop, refer to http://cares.straumann.com.
Straumann® CARES® Abutments may not be available in your country.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
161
CROWNS AND BRIDGESNARROW CrossFit®IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
025.2201 NC Impression postfor closed tray, with1 guide screw and 2 caps
Length 12.3 mm TAN/POM
025.2202 NC Impression postfor open tray, short, withguide screw
Length 16.5 mm TAN
025.2205 NC Impression postfor open tray, long, withguide screw
Length 24 mm TAN
025.2101 NC Implant analog Length 12 mm Ti
025.2102 NC Repositionableimplant analogfor fully digital andconventional workflow
Length 17 mm Stainlesssteel
Bite registration
025.2208-04 NC Bite registration aid Height 8 mm POM
025.2212-04 NC Bite registration aid Height 12 mm POM
Temporary restoration
024.2370 NC Temporary abutment Height 12 mm,Ø 5 mm
PEEK/TAN
024.2372 NC Temporary AbutmentVITA CAD-Temp®
Temporary abutment
Height 11 mm PMMA/TAN
024.2371 NC Temporary abutmentfor crown
Height 11 mm,Ø 3.5 mm
TAN
024.2375 NC Temporary abutmentfor bridge
Height 11 mm,Ø 3.5 mm
TAN
ImportantThe temporary abutment is screwed into the implant at 15–35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
162
CROWNS AND BRIDGESNARROW CrossFit®IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Auxiliary parts
025.2900 NC Basal screw Length 7.9 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantThe temporary abutment is screwed into the implant at 15–35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
163
CROWNS AND BRIDGESNARROW CrossFit®ANATOMIC IPS e.max®, GOLD, ANATOMIC AND MESO ABUTMENT
Art. No. Article Dimensions Material
Screw-retained or cement-retained restorations
022.2410 NC Gold abutmentfor crown
Height 3.7 mm Ceramicor®/POM
022.2812 NC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height 2 mm ZrO2/MO 0
022.2814 NC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height3.5 mm
ZrO2/MO 0
022.2822 NC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height 2 mm ZrO2/MO 0
022.2824 NC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height3.5 mm
ZrO2/MO 0
022.2832 NC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height 2 mm ZrO2/MO 1
022.2834 NC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height3.5 mm
ZrO2/MO 1
022.2842 NC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height 2 mm ZrO2/MO 1
022.2844 NC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height3.5 mm
ZrO2/MO 1
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
164
CROWNS AND BRIDGESNARROW CrossFit®ANATOMIC IPS e.max®, GOLD, ANATOMIC AND MESO ABUTMENT
Art. No. Article Dimensions Material
Cement-retained restorations
022.2102 NC Anatomic abutmentstraight
Gingiva height 2 mm Ti
022.2104 NC Anatomic abutmentstraight
Gingiva height3.5 mm
Ti
022.2152 NC Anatomic abutmentangled 15°
Gingiva height 2 mm Ti
022.2154 NC Anatomic abutmentangled 15°
Gingiva height3.5 mm
Ti
022.2202 NC Meso abutment Height 13.4 mm,Ø 6 mm
Ti
Auxiliary parts
025.2900 NC Basal screw Length 7.9 mm TAN
025.2920025.2920-04
NC Polishing aid Length 16 mm Stainlesssteel
046.239 Analog holder Length 105 mm Al/Steel
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
165
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
All-in-One Sets
027.4301 NC CementableAll-in-One Setfor crown
Ø 3.5 mm,Abutment height 4 mm,Gingiva height 1 mm
027.4302 NC CementableAll-in-One Setfor crown
Ø 3.5 mm,Abutment height 4 mm,Gingiva height 2 mm
027.4303 NC CementableAll-in-One Setfor crown
Ø 3.5 mm,Abutment height 4 mm,Gingiva height 3 mm
027.4307 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 1 mm
027.4308 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 2 mm
027.4309 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 3 mm
027.4310 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 1 mm
027.4311 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 2 mm
027.4312 NC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 3 mm
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
166
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Cement-retained restorations
022.2311 NC Cementableabutment
Ø 3.5 mm,Gingiva height 1 mm,Abutment height 4 mm
Ti
022.2312 NC Cementableabutment
Ø 3.5 mm,Gingiva height 2 mm,Abutment height 4 mm
Ti
022.2313 NC Cementableabutment
Ø 3.5 mm,Gingiva height 3 mm,Abutment height 4 mm
Ti
022.2315 NC Cementableabutment
Ø 3.5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
Ti
022.2316 NC Cementableabutment
Ø 3.5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
Ti
022.2317 NC Cementableabutment
Ø 3.5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
167
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
022.2321 NC Cementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 4 mm
Ti
022.2322 NC Cementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 4 mm
Ti
022.2323 NC Cementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 4 mm
Ti
022.2325 NC Cementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
Ti
022.2326 NC Cementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
Ti
022.2327 NC Cementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
168
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Impression taking (abutment level) and master cast fabrication, for cementable abutment
025.2203-04 NC Impression capfor cementableabutment
Ø 3.5 mm,Abutment height 4 mm
POM
025.2204-04 NC Impression capfor cementableabutment
Ø 5 mm,Abutment height 4 mm
POM
025.2220-04 NC Impression capfor cementableabutment
Ø 5 mm,Abutment height 5.5 mm
POM
025.2112 NC Implant analogfor cementableabutment
Ø 3.5 mm,Abutment height 4 mm
TAN
025.2116 NC Implant analogfor cementableabutment
Ø 3.5 mm,Abutment height 5.5 mm
TAN
025.2122 NC Implant analogfor cementableabutment
Ø 5 mm,Abutment height 4 mm
TAN
025.2126 NC Implant analogfor cementableabutment
Ø 5 mm,Abutment height 5.5 mm
TAN
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
169
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Temporary restoration, for cementable abutment
024.2346 NC Temporary copingfor cementableabutment
Ø 3.5 mm PMMA
024.2356 NC Temporary copingfor cementableabutment
Ø 5 mm PMMA
024.2312-04 NC Protective capfor cementableabutment
Ø 3.5 mm,Abutment height 4 mm
PEEK
024.2316-04 NC Protective capfor cementableabutment
Ø 3.5 mm,Abutment height 5.5 mm
PEEK
024.2322-04 NC Protective capfor cementableabutment
Ø 5 mm,Abutment height 4 mm
PEEK
024.2326-04 NC Protective capfor cementableabutment
Ø 5 mm,Abutment height 5.5 mm
PEEK
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
170
CROWNS AND BRIDGESNARROW CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Coping, for cementable abutment
023.2310 NC Copingfor bridge on cementableabutment
Ø 3.5 mm POM
023.2316 NC Copingfor crown on cementableabutment
Ø 3.5 mm POM
023.2320 NC Copingfor bridge on cementableabutment
Ø 5 mm POM
023.2326 NC Copingfor crown on cementableabutment
Ø 5 mm POM
Auxiliary parts
025.2911-04 NC Transfer aidfor cementable abutment
Ø 3.5 mm PC
025.2912-04 NC Transfer aidfor cementable abutment
Ø 5 mm PC
025.2908 NC Basal screwfor cementable abutmentonly
Length 7.9 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SBR
IDG
ES
171
BRIDGESNARROW CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Screw-retained restorations
022.2731 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 1 mm
TAN
022.2732 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height2.5 mm
TAN
022.2734 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 4 mm
TAN
022.2741 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.2742 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height2.5 mm
TAN
022.2744 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.2782 NC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height2.5 mm
TAN
022.2786 NC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height2.5 mm
TAN
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
BRIDG
ES
172
BRIDGESNARROW CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Impression taking (abutment level) and master cast fabrication, for Multi-base abutment
025.2231-04 NC Impression capfor Multi-base abutment,straight
Ø 3.5 mm POM
025.2241-04 NC Impression capfor Multi-base abutment,straight
Ø 4.5 mm POM
025.2232 NC Impression postfor Multi-base abutment,straight
Ø 3.5 mm TAN
025.2242 NC Impression postfor Multi-base abutment,straight
Ø 4.5 mm TAN
025.2206 NC Impression postfor Multi-base abutment,angled 25°
Ø 4 mm TAN
025.2131 NC Implant analogfor Multi-base abutment,straight
Ø 3.5 mm TAN
025.2141 NC Implant analogfor Multi-base abutment,straight
Ø 4.5 mm TAN
025.2106 NC Implant analogfor Multi-base abutment,angled 25°
Ø 4 mm TAN
Temporary restoration, for Multi-base abutment
024.2332 NC Temporary copingfor Multi-base abutment,straight
Ø 3.5 mm Ti
024.2342 NC Temporary copingfor Multi-base abutment,straight
Ø 4.5 mm Ti
024.2307 NC Temporary copingfor Multi-base abutment,angled 25°
Ø 4 mm Ti
024.2331-04 NC Protective capfor Multi-base abutment,straight
Ø 3.5 mm PEEK/TAN
024.2341-04 NC Protective capfor Multi-base abutment,straight
Ø 4.5 mm PEEK/TAN
024.2306-04 NC Protective capfor Multi-base abutment,angled 25°
Ø 4 mm PEEK/TAN
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SBR
IDG
ES
173
BRIDGESNARROW CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Coping, for Multi-base abutment
023.2731 NC Copingfor bridge on Multi-baseabutment, straight
Ø 3.5 mm Ceramicor®/POM
023.2741 NC Copingfor bridge on Multi-baseabutment, straight
Ø 4.5 mm Ceramicor®/POM
023.2701 NC Copingfor bridge on Multi-baseabutment, angled 25°
Ø 4 mm Ceramicor®/POM
023.2734 NC Copingfor bridge on Multi-baseabutment, straight
Ø 3.5 mm POM
023.2744 NC Copingfor bridge on Multi-baseabutment, straight
Ø 4.5 mm POM
023.2704 NC Copingfor bridge on Multi-baseabutment, angled 25°
Ø 4 mm POM
Auxiliary parts
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
174
CROWNS AND BRIDGESNARROW CrossFit®AUXILIARY PARTS
Art. No. Article Dimensions Material
Auxiliary parts
025.2920025.2920-04
NC Polishing aid Length 16 mm Stainlesssteel
025.2900 NC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
175
CROWNS AND BRIDGESREGULAR CrossFit®IMPRESSION TAKING AND SOFT TISSUE MANAGEMENT
Art. No. Article Dimensions Material
Impression taking and master cast fabrication
025.4201 RC Impression postfor closed tray, with 1 guidescrew and 2 caps
Length 12.3 mm TAN/POM
025.4202 RC Impression postfor open tray, short, withguide screw
Length 16.5 mm TAN
025.4205 RC Impression postfor open tray, long, withguide screw
Length 24 mm TAN
025.4101 RC Implant analog Length 12 mm Ti
025.4102 RC Repositionable implantanalogfor fully digital andconventional workflow
Length 17 mm Stainlesssteel
Bite registration
025.4208-04 RC Bite registration aid Height 8 mm POM
025.4212-04 RC Bite registration aid Height 12 mm POM
Temporary restoration
024.4370 RC Temporary abutment Height 12 mm,Ø 7 mm
PEEK/TAN
024.4372 RC Temporary Abutment VITACAD-Temp®
Temporary abutment
Height 11 mm PMMA/TAN
024.4371 RC Temporary abutmentfor crown
Height 11 mm,Ø 4.5 mm
TAN
024.4375 RC Temporary abutmentfor bridge
Height 11 mm,Ø 4.5 mm
TAN
Auxiliary parts
025.4900 RC Basal screw Length 7.9 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantThe temporary abutment is screwed into the implant at 15–35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
176
CROWNS AND BRIDGESREGULAR CrossFit®GOLD, ANATOMIC IPS e.max® ABUTMENT
Art. No. Article Dimensions Material
Screw-retained restorations
022.4430 RC Gold abutmentfor bridge
Height 5.2 mm Ceramicor®/POM
Screw-retained or cement-retained restorations
022.4410 RC Gold abutmentfor crown
Height 3.8 mm Ceramicor®/POM
022.4812 RC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height 2 mm ZrO2/MO 0
022.4814 RC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height3.5 mm
ZrO2/MO 0
022.4822 RC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height 2 mm ZrO2/MO 0
022.4824 RC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height3.5 mm
ZrO2/MO 0
022.4832 RC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height 2 mm ZrO2/MO 1
022.4834 RC Straumann® AnatomicIPS e.max® abutmentstraight
Gingiva height3.5 mm
ZrO2/MO 1
022.4842 RC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height 2 mm ZrO2/MO 1
022.4844 RC Straumann® AnatomicIPS e.max® abutmentangled 15°
Gingiva height3.5 mm
ZrO2/MO 1
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
177
CROWNS AND BRIDGESREGULAR CrossFit®ANATOMIC, MESO ABUTMENT
Art. No. Article Dimensions Material
Cement-retained restorations
022.4102 RC Anatomic abutmentstraight
Gingiva height 2 mm Ti
022.4104 RC Anatomic abutmentstraight
Gingiva height3.5 mm
Ti
022.4152 RC Anatomic abutmentangled 15°
Gingiva height 2 mm Ti
022.4154 RC Anatomic abutmentangled 15°
Gingiva height3.5 mm
Ti
022.4202 RC Meso abutment Height 13.4 mm,Ø 8 mm
Ti
Auxiliary parts
025.4920025.4920-04
RC Polishing aid Length 16 mm Stainlesssteel
025.4900 RC Basal screw Length 7.9 mm TAN
025.4902 RC Basal screwfor gold abutment, forbridge only
Length 8.3 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
178
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
All-in-One Sets
027.4313 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 1 mm
027.4314 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 2 mm
027.4315 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 4 mm,Gingiva height 3 mm
027.4316 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 1 mm
027.4317 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 2 mm
027.4318 RC CementableAll-in-One Setfor crown
Ø 5 mm,Abutment height 5.5 mm,Gingiva height 3 mm
027.4319 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 4 mm,Gingiva height 1 mm
027.4320 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 4 mm,Gingiva height 2 mm
027.4321 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 4 mm,Gingiva height 3 mm
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
179
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
All-in-One Sets
027.4322 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 5.5 mm,Gingiva height 1 mm
027.4323 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 5.5 mm,Gingiva height 2 mm
027.4324 RC CementableAll-in-One Setfor crown
Ø 6.5 mm,Abutment height 5.5 mm,Gingiva height 3 mm
Cement-retained restorations
022.4321 RC Cementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 4 mm
Ti
022.4322 RC Cementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 4 mm
Ti
022.4323 RC Cementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 4 mm
Ti
022.4325 RC Cementableabutment
Ø 5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
Ti
022.4326 RC Cementableabutment
Ø 5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
Ti
022.4327 RC Cementableabutment
Ø 5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
180
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Cement-retained restorations
022.4331 RC Cementableabutment
Ø 6.5 mm,Gingiva height 1 mm,Abutment height 4 mm
Ti
022.4332 RC Cementableabutment
Ø 6.5 mm,Gingiva height 2 mm,Abutment height 4 mm
Ti
022.4333 RC Cementableabutment
Ø 6.5 mm,Gingiva height 3 mm,Abutment height 4 mm
Ti
022.4335 RC Cementableabutment
Ø 6.5 mm,Gingiva height 1 mm,Abutment height 5.5 mm
Ti
022.4336 RC Cementableabutment
Ø 6.5 mm,Gingiva height 2 mm,Abutment height 5.5 mm
Ti
022.4337 RC Cementableabutment
Ø 6.5 mm,Gingiva height 3 mm,Abutment height 5.5 mm
Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
181
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Impression taking (abutment level) and master cast fabrication, for cementable abutment
025.4203-04 RC Impression capfor cementable abutment
Ø 5 mm,Abutment height4 mm
POM
025.4220-04 RC Impression capfor cementable abutment
Ø 5 mm,Abutment height5.5 mm
POM
025.4204-04 RC Impression capfor cementable abutment
Ø 6.5 mm,Abutment height4 mm
POM
025.4230-04 RC Impression capfor cementable abutment
Ø 6.5 mm,Abutment height5.5 mm
POM
025.4132 RC Implant analogfor cementable abutment
Ø 5 mm,Abutment height4 mm
TAN
025.4136 RC Implant analogfor cementable abutment
Ø 5 mm,Abutment height5.5 mm
TAN
025.4122 RC Implant analogfor cementable abutment
Ø 6.5 mm,Abutment height4 mm
TAN
025.4126 RC Implant analogfor cementable abutment
Ø 6.5 mm,Abutment height5.5 mm
TAN
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
CRO
WN
S AN
D BRID
GES
182
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Temporary restoration, for cementable abutment
024.4356 RC Temporary copingfor cementable abutment
Ø 5 mm PMMA
024.4366 RC Temporary copingfor cementable abutment
Ø 6.5 mm PMMA
024.4322-04 RC Protective capfor cementable abutment
Ø 5 mm,Abutment height4 mm
PEEK
024.4326-04 RC Protective capfor cementable abutment
Ø 5 mm,Abutment height5.5 mm
PEEK
024.4332-04 RC Protective capfor cementable abutment
Ø 6.5 mm,Abutment height4 mm
PEEK
024.4336-04 RC Protective capfor cementable abutment
Ø 6.5 mm,Abutment height5.5 mm
PEEK
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
183
CROWNS AND BRIDGESREGULAR CrossFit®CEMENTABLE ABUTMENT
Art. No. Article Dimensions Material
Coping, for cementable abutment
023.4320 RC Copingfor bridge on cementableabutment
Ø 5 mm POM
023.4326 RC Copingfor crown on cementableabutment
Ø 5 mm POM
023.4330 RC Copingfor bridge on cementableabutment
Ø 6.5 mm POM
023.4336 RC Copingfor crown on cementableabutment
Ø 6.5 mm POM
Auxiliary parts
025.4912-04 RC Transfer aidfor cementable abutment
Ø 5 mm PC
025.4913-04 RC Transfer aidfor cementable abutment
Ø 6.5 mm PC
025.4908 RC Basal screwfor cementable abutmentonly
Length 7.9 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
BRIDG
ES
184
BRIDGESREGULAR CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Screw-retained restorations
022.4741 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.4742 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height2.5 mm
TAN
022.4744 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.4761 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 1 mm
TAN
022.4762 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height2.5 mm
TAN
022.4764 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 4 mm
TAN
022.4782 RC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height2.5 mm
TAN
022.4786 RC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height2.5 mm
TAN
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SBR
IDG
ES
185
BRIDGESREGULAR CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Impression taking (abutment level) and master cast fabrication, for Multi-base abutment
025.4241-04 RC Impression capfor Multi-base abutment,straight
Ø 4.5 mm POM
025.4261-04 RC Impression capfor Multi-base abutment,straight
Ø 6.5 mm POM
025.4242 RC Impression postfor Multi-base abutment,straight
Ø 4.5 mm TAN
025.4262 RC Impression postfor Multi-base abutment,straight
Ø 6.5 mm TAN
025.4206 RC Impression postfor Multi-base abutment,angled 25°
Ø 4 mm TAN
025.4141 RC Implant analogfor Multi-base abutment,straight
Ø 4.5 mm TAN
025.4161 RC Implant analogfor Multi-base abutment,straight
Ø 6.5 mm TAN
025.4106 RC Implant analogfor Multi-base abutment,angled 25°
Ø 4 mm TAN
Temporary restoration, for Multi-base abutment
024.4342 RC Temporary copingfor Multi-base abutment,straight
Ø 4.5 mm Ti
024.4362 RC Temporary copingfor Multi-base abutment,straight
Ø 6.5 mm Ti
024.4307 RC Temporary copingfor Multi-base abutment,angled 25°
Ø 4 mm Ti
024.4341-04 RC Protective capfor Multi-base abutment,straight
Ø 4.5 mm PEEK/TAN
024.4361-04 RC Protective capfor Multi-base abutment,straight
Ø 6.5 mm PEEK/TAN
024.4306-04 RC Protective capfor Multi-base abutment,angled 25°
Ø 4 mm PEEK/TAN
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
BRIDG
ES
186
BRIDGESREGULAR CrossFit®MULTI-BASE ABUTMENT
Art. No. Article Dimensions Material
Coping, for Multi-base abutment
023.4741 RC Copingfor bridge on Multi-baseabutment, straight
Ø 4.5 mm Ceramicor®/POM
023.4761 RC Copingfor bridge on Multi-baseabutment, straight
Ø 6.5 mm Ceramicor®/POM
023.4701 RC Copingfor bridge on Multi-baseabutment, angled 25°
Ø 4 mm Ceramicor®/POM
023.4744 RC Copingfor bridge on Multi-baseabutment, straight
Ø 4.5 mm POM
023.4764 RC Copingfor bridge on Multi-baseabutment, straight
Ø 6.5 mm POM
023.4704 RC Copingfor bridge on Multi-baseabutment, angled 25°
Ø 4 mm POM
Auxiliary parts
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SC
ROW
NS
AN
D B
RID
GES
187
CROWNS AND BRIDGESREGULAR CrossFit®AUXILIARY PARTS
Art. No. Article Dimensions Material
Auxiliary parts
025.4920025.4920-04
RC Polishing aid Length 16 mm Stainlesssteel
025.4900 RC Basal screw Length 7.9 mm TAN
025.4902 RC Basal screwfor gold abutment, forbridge only
Length 8.3 mm TAN
025.4908 RC Basal screwfor cementable abutmentonly
Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
046.239 Analog holder Length 105 mm Al/Steel
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
HYBRID
DEN
TURES
188
HYBRID DENTURESNARROW CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® Abutment
022.2502 NC LOCATOR® Abutment Height 2 mm TAV
022.2503 NC LOCATOR® Abutment Height 3 mm TAV
022.2504 NC LOCATOR® Abutment Height 4 mm TAV
022.2505 NC LOCATOR® Abutment Height 5 mm TAV
022.2506 NC LOCATOR® Abutment Height 6 mm TAV
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
189
HYBRID DENTURESNARROW CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
048.189V2 LOCATOR® Male processingpackagecontents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),clear replacement male(048.190),pink replacement male(048.191),blue replacement male(048.192)
Ti/Nylon
048.190V4 LOCATOR® Replacement maleclear, 0°–10°•, 5 lbs, 2.27kg••
Height 1.7 mm Nylon
048.191V4 LOCATOR® Replacement malepink, light retention, 0°–10°•,3 lbs, 1.36 kg••
Height 1.7 mm Nylon
048.192V4 LOCATOR® Replacement maleblue, extra-light retention,0°–10°•,1.5 lbs, 0.68 kg••
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID
DEN
TURES
190
HYBRID DENTURESNARROW CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
048.182V2 LOCATOR® Male processingpackageextended range, contents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),green replacement male(048.193),orange replacement male(048.188),red replacement male(048.194)
Ti/Nylon
048.193V4 LOCATOR® Replacement malegreen, extended range,10°–20°•,4 lbs, 1.82 kg••
Height 1.7 mm Nylon
048.188V4 LOCATOR® Replacement maleorange, light retention,extended range, 10°–20°•,2 lbs, 0.91 kg••
Height 1.7 mm Nylon
048.194V4 LOCATOR® Replacement malered, extra-light retention,extendedrange, 10°–20°•, 1 lbs, 0.45kg••
Height 1.7 mm Nylon
048.181V4 LOCATOR® Replacement malegray, zero (0) retention
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
191
HYBRID DENTURESNARROW CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
025.0120-04 LOCATOR® Femaleanalog
Length 10 mm,Ø 4 mm
Al
048.197V4 LOCATOR® Impressioncoping
Height 4 mm Al housingwith LDPEinsert
048.196V20 LOCATOR® Block-outspacer
Thickness 0.4 mm Siliconerubber
048.195V4 LOCATOR® Blackprocessing male
Height 1.9 mm LDPE
048.218V4 LOCATOR® Processingspacer
POM
046.413V4 LOCATOR® Abutmentholder sleeve
PSU
Auxiliary parts
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
048.199V4 LOCATOR® Parallel post Length 8 mm LDPE
048.200 LOCATOR® Anglemeasurement guide
Length 50 mm,Width 15 mm
Stainlesssteel
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID
DEN
TURES
192
HYBRID DENTURESNARROW CrossFit®BAR
Art. No. Article Dimensions Material
Components for gold bars
022.2701 NC Abutmentfor bars, gold
Height 10 mm Ceramicor®
022.2731 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 1 mm
TAN
022.2732 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height2.5 mm
TAN
022.2734 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 4 mm
TAN
022.2741 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.2742 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height2.5 mm
TAN
022.2744 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.2782 NC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height2.5 mm
TAN
022.2786 NC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height2.5 mm
TAN
023.2732 NC Copingfor bar on Multi-baseabutment, straight
Ø 3.5 mm Ceramicor®
023.2742 NC Copingfor bar on Multi-baseabutment, straight
Ø 4.5 mm Ceramicor®
023.2702 NC Copingfor bar on Multi-baseabutment, angled 25°
Ø 4 mm Ceramicor®
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
193
HYBRID DENTURESNARROW CrossFit®BAR
Art. No. Article Dimensions Material
Components for gold bars
048.411 Dolder® baregg-shaped cross-section,mini
Length 25 mm,Height 2.3 mm
Elitor®
048.412 Dolder® baregg-shaped cross-section,regular
Length 25 mm,Height 3 mm
Elitor®
048.413 Dolder® bar matrixincludes spacer, mini
Length 25 mm,Height 2.75 mm
Elitor®/Brass
048.414 Dolder® bar matrixincludes spacer, regular
Length 25 mm,Height 3.5 mm
Elitor®/Brass
Auxiliary parts
046.150 Activator setfor all bar matrices, three-part
Length 50 mm Stainlesssteel
046.151 Deactivatorfor Dolder® bar matrices,mini
Length 66 mm Grilon BS/Brass
046.152 Deactivatorfor Dolder® bar matrices,regular
Length 66 mm Grilon BS/Brass
025.4900 RC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
025.0911-04 NC/RC Stabilization pinfor bar on Multi-baseabutment
Length 16 mm Stainlesssteel
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
HYBRID
DEN
TURES
194
HYBRID DENTURESNARROW CrossFit®BAR
Art. No. Article Dimensions Material
Components for titanium bars
022.2702 NC Abutmentfor bars
Height 10 mm Ti
022.2731 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 1 mm
TAN
022.2732 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 2.5 mm
TAN
022.2734 NC Multi-base abutmentstraight
Ø 3.5 mm,Gingiva height 4 mm
TAN
022.2741 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.2742 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 2.5 mm
TAN
022.2744 NC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.2782 NC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height 2.5 mm
TAN
022.2786 NC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height 2.5 mm
TAN
023.2736 NC Copingfor bar on Multi-baseabutment, straight
Ø 3.5 mm Ti
023.2746 NC Copingfor bar on Multi-baseabutment, straight
Ø 4.5 mm Ti
023.2706 NC Copingfor bar on Multi-baseabutment, angled 25°
Ø 4 mm Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
195
HYBRID DENTURESNARROW CrossFit®BAR
Art. No. Article Dimensions Material
Components for titanium bars
048.466 Titanium baregg-shaped cross-section,mini
Length 50 mm,Height 2.3 mm
Ti
048.465 Titanium baregg-shaped cross-section,regular
Length 50 mm,Height 3 mm
Ti
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
Auxiliary parts
048.461 Plastic baregg-shaped cross-section,mini
Length 80 mm,Height 2.3 mm
PMMA
048.460 Plastic baregg-shaped cross-section,regular
Length 80 mm,Height 3 mm
PMMA
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
025.2900 NC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETICS
HYBRID
DEN
TURES
196
HYBRID DENTURESNARROW CrossFit®AUXILIARY PARTS
Art. No. Article Dimensions Material
Auxiliary parts
025.2920025.2920-04
NC Polishing aid Length 16 mm Stainlesssteel
025.2900 NC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
025.0911-04 NC/RC Stabilization pinfor bar on Multi-baseabutment
Length 16 mm Stainlesssteel
046.239 Analog holder Length 105 mm Al/Steel
ImportantNC prosthetic components can only be used with Straumann® Bone Level implants, Ø 3.3 mm, Narrow CrossFit®.
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
197
HYBRID DENTURESREGULAR CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® Abutment
022.4501 RC LOCATOR® Abutment Height 1 mm TAV
022.4502 RC LOCATOR® Abutment Height 2 mm TAV
022.4503 RC LOCATOR® Abutment Height 3 mm TAV
022.4504 RC LOCATOR® Abutment Height 4 mm TAV
022.4505 RC LOCATOR® Abutment Height 5 mm TAV
022.4506 RC LOCATOR® Abutment Height 6 mm TAV
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID
DEN
TURES
198
HYBRID DENTURESREGULAR CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
048.189V2 LOCATOR® Male processingpackagecontents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),clear replacement male(048.190),pink replacement male(048.191),blue replacement male(048.192)
Ti/Nylon
048.190V4 LOCATOR® Replacement maleclear, 0°–10°•, 5 lbs, 2.27kg••
Height 1.7 mm Nylon
048.191V4 LOCATOR® Replacement malepink, light retention, 0°–10°•,3 lbs, 1.36 kg••
Height 1.7 mm Nylon
048.192V4 LOCATOR® Replacement maleblue, extra-light retention,0°–10°•,1.5 lbs, 0.68 kg••
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
199
HYBRID DENTURESREGULAR CrossFit®LOCATOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
048.182V2 LOCATOR® Male processingpackageextended range, contents:denture cap (Ø 5.5 mm,height 2.5 mm) with blackprocessing male (height1.9 mm),block-out spacer (048.196),green replacement male(048.193),orange replacement male(048.188),red replacement male(048.194)
Ti/Nylon
048.193V4 LOCATOR® Replacement malegreen, extended range,10°–20°•,4 lbs, 1.82 kg••
Height 1.7 mm Nylon
048.188V4 LOCATOR® Replacement maleorange, light retention,extended range, 10°–20°•,2 lbs, 0.91 kg••
Height 1.7 mm Nylon
048.194V4 LOCATOR® Replacement malered, extra-light retention,extendedrange, 10°–20°•, 1 lbs, 0.45kg••
Height 1.7 mm Nylon
048.181V4 LOCATOR® Replacement malegray, zero (0) retention
Height 1.7 mm Nylon
• = For the correction of angle divergences•• = Retention force
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
PRO
STH
ETICS
HYBRID
DEN
TURES
200
HYBRID DENTURESREGULAR CrossFit®LOCATOR® AND SFI-ANCHOR® ABUTMENT
Art. No. Article Dimensions Material
LOCATOR® components
025.0120-04 LOCATOR® Femaleanalog
Length 10 mm,Ø 4 mm
Al
048.197V4 LOCATOR® Impressioncoping
Height 4 mm Al housingwith LDPEinsert
048.196V20 LOCATOR® Block-outspacer
Thickness 0.4 mm Siliconerubber
048.195V4 LOCATOR® Blackprocessing male
Height 1.9 mm LDPE
048.218V4 LOCATOR® Processingspacer
POM
046.413V4 LOCATOR® Abutmentholder sleeve
PSU
Auxiliary parts
046.415 LOCATOR® Core tool Length 100 mm Stainlesssteel
046.416 LOCATOR® Driverfor ratchet, short
Length 15 mm Stainlesssteel
046.417 LOCATOR® Driverfor ratchet, long
Length 21 mm Stainlesssteel
048.199V4 LOCATOR® Parallel post Length 8 mm LDPE
048.200 LOCATOR® Anglemeasurement guide
Length 50 mm,Width 15 mm
Stainlesssteel
045.025 CD20 SFI-Anchor® Abutment, Div. 20°
Height 2 mm,Ø 5.3 mm
Titaniumgrade 5
045.036 RC SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 1 mm Titaniumgrade 5/POM
045.037 RC SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 2 mm Titaniumgrade 5/POM
045.038 RC SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 3 mm Titaniumgrade 5/POM
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
201
HYBRID DENTURESREGULAR CrossFit®LOCATOR® AND SFI-ANCHOR® ABUTMENT
Art. No. Article Dimensions Material
045.039 RC SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 4 mm Titaniumgrade 5/POM
045.040 RC SFI-Anchor® Abutment,Div. 60°incl. aligner
Height 5 mm Titaniumgrade 5/POM
045.041 RC SFI-Anchor® Abutment,Div. 20°
Height 1 mm Titaniumgrade 5
045.042 RC SFI-Anchor® Abutment,Div. 20°
Height 2 mm Titaniumgrade 5
045.043 RC SFI-Anchor® Abutment,Div. 20°
Height 3 mm Titaniumgrade 5
045.044 RC SFI-Anchor® Abutment,Div. 20°
Height 4 mm Titaniumgrade 5
045.045 RC SFI-Anchor® Abutment,Div. 20°
Height 5 mm Titaniumgrade 5
045.046V2 SFI-Anchor® Basic set2x Retention insert extra-low, low, medium, 2xHousing, 2x Block-outspacer
045.047V4 SFI-Anchor® Retentioninsert, extra-low
Pekkton®
045.048V4 SFI-Anchor® Retentioninsert, low
Pekkton®
045.049V4 SFI-Anchor® Retentioninsert, medium
Pekkton®
045.050V4 SFI-Anchor® Retentioninsert, strong
Pekkton®
045.051 SFI-Anchor® Retentioninsert, Elitor®
Elitor®
045.052V4 SFI-Anchor® Spacerfor use in the dental lab
POM
045.053V4 SFI-Anchor® Block-outspacerfor use in the dental office
Silicone
045.054V4 SFI-Anchor® Impressionpart
POM
045.055V4 SFI-Anchor® Analog Titaniumgrade 5
045.056 SFI-Anchor® Abutmentplanner
POM
PRO
STH
ETICS
HYBRID
DEN
TURES
202
HYBRID DENTURESREGULAR CrossFit®LOCATOR® AND SFI-ANCHOR® ABUTMENT
Art. No. Article Dimensions Material
045.057 SFI-Anchor® Aligner POM
045.058 SFI-Anchor® Tool Titaniumgrade 5
045.059 SFI-Anchor® Screwdriver Sandvik
045.060 SFI-Anchor® Instrument set4x Impression part, 4xAnalog, 1x Abutmentplanner, 1x Aligner, 1xTool, 1x Screwdriver
045.061V4 SFI-Anchor® Housing Titaniumgrade 5
SFI-Anchor® is designed and manufactured by Cendres+Métaux and is exclusively distributed by lnstitut StraumannAG, Basel.
0473ManufacturerZest Anchors, Inc.Escondido, CA 92029USA
ManufacturerCendres+Métaux SARue de Boujean 122CH-2501 Biel(Suisse).
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
203
HYBRID DENTURESREGULAR CrossFit®BAR
Art. No. Article Dimensions Material
Components for gold bars
022.4701 RC Abutmentfor bars, gold
Height 10 mm Ceramicor®
022.4741 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.4742 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height2.5 mm
TAN
022.4744 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.4761 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 1 mm
TAN
022.4762 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height2.5 mm
TAN
022.4764 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 4 mm
TAN
022.4782 RC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height2.5 mm
TAN
022.4786 RC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height2.5 mm
TAN
023.4742 RC Copingfor bar on Multi-baseabutment, straight
Ø 4.5 mm Ceramicor®
023.4762 RC Copingfor bar on Multi-baseabutment, straight
Ø 6.5 mm Ceramicor®
023.4702 RC Copingfor bar on Multi-baseabutment, angled 25°
Ø 4 mm Ceramicor®
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
HYBRID
DEN
TURES
204
HYBRID DENTURESREGULAR CrossFit®BAR
Art. No. Article Dimensions Material
Components for gold bars
048.411 Dolder® baregg-shaped cross-section,mini
Length 25 mm,Height 2.3 mm
Elitor®
048.412 Dolder® baregg-shaped cross-section,regular
Length 25 mm,Height 3 mm
Elitor®
048.413 Dolder® bar matrixincludes spacer, mini
Length 25 mm,Height 2.75 mm
Elitor®/Brass
048.414 Dolder® bar matrixincludes spacer, regular
Length 25 mm,Height 3.5 mm
Elitor®/Brass
Auxiliary parts
046.150 Activator setfor all bar matrices, three-part
Length 50 mm Stainlesssteel
046.151 Deactivatorfor Dolder® bar matrices,mini
Length 66 mm Grilon BS/Brass
046.152 Deactivatorfor Dolder® bar matrices,regular
Length 66 mm Grilon BS/Brass
025.4900 RC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
025.0911-04 NC/RC Stabilization pinfor bar on Multi-baseabutment
Length 16 mm Stainlesssteel
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
205
HYBRID DENTURESREGULAR CrossFit®BAR
Art. No. Article Dimensions Material
Components for titanium bars
022.4702 RC Abutmentfor bars
Height 10 mm Ti
022.4741 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 1 mm
TAN
022.4742 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 2.5 mm
TAN
022.4744 RC Multi-base abutmentstraight
Ø 4.5 mm,Gingiva height 4 mm
TAN
022.4761 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 1 mm
TAN
022.4762 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 2.5 mm
TAN
022.4764 RC Multi-base abutmentstraight
Ø 6.5 mm,Gingiva height 4 mm
TAN
022.4782 RC Multi-base abutmentangled 25°, type A
Ø 4 mm,Gingiva height 2.5 mm
TAN
022.4786 RC Multi-base abutmentangled 25°, type B
Ø 4 mm,Gingiva height 2.5 mm
TAN
023.4746 RC Copingfor bar on Multi-baseabutment, straight
Ø 4.5 mm Ti
023.4766 RC Copingfor bar on Multi-baseabutment, straight
Ø 6.5 mm Ti
023.4706 RC Copingfor bar on Multi-baseabutment, angled 25°
Ø 4 mm Ti
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETICS
HYBRID
DEN
TURES
206
HYBRID DENTURESREGULAR CrossFit®BAR
Art. No. Article Dimensions Material
Components for titanium bars
048.466 Titanium baregg-shaped cross-section,mini
Length 50 mm,Height 2.3 mm
Ti
048.465 Titanium baregg-shaped cross-section,regular
Length 50 mm,Height 3 mm
Ti
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
Auxiliary parts
048.461 Plastic baregg-shaped cross-section,mini
Length 80 mm,Height 2.3 mm
PMMA
048.460 Plastic baregg-shaped cross-section,regular
Length 80 mm,Height 3 mm
PMMA
048.471 Titanium bar matrixincludes spacer, mini
Length 50 mm,Height 3.5 mm
Ti/Brass
048.470 Titanium bar matrixincludes spacer, regular
Length 50 mm,Height 4.5 mm
Ti/Brass
025.4900 RC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
All final abutments are permanently screwed into the implant at 35 Ncm.
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
PRO
STH
ETIC
SH
YBRI
D D
ENTU
RES
207
HYBRID DENTURESREGULAR CrossFit®AUXILIARY PARTS
Art. No. Article Dimensions Material
Auxiliary parts
025.4920025.4920-04
RC Polishing aid Length 16 mm Stainlesssteel
025.4900 RC Basal screw Length 7.9 mm TAN
025.0900-04 NC/RC Occlusal screwfor coping on Multi-baseabutment only
Length 4.5 mm TAN
025.0911-04 NC/RC Stabilization pinfor bar on Multi-baseabutment
Length 16 mm Stainlesssteel
046.239 Analog holder Length 105 mm Al/Steel
ImportantRC prosthetic components can only be used with Straumann® Bone Level implants, Ø 4.1 and Ø 4.8 mm, RegularCrossFit®.
1250
When patients and dentists decide on a dental implant, they rely entirely on the product. As a manufacturer of dental implants, Straumann has been well acquainted with these demands for almost 40 years.
Straumann’s commitment – As a pioneer in implant dentistry, Straumann is committed to supporting the millions of patients with Straumann® dental implants and original prosthetic components as exclusive distributor.
Implant-borne prosthetic products show signs of wear over a long period, just like crowns and bridges on natural teeth. Straumann is therefore launching Straumann® Classic components.
Straumann® Classic stands for Confidence Reliability Durability Peace of mind
Straumann® Classic is Straumann’s commitment to supply prosthetic components for all Straumann® implant types listed in this catalog in the event of the need for a repeat restoration.
If your patient received a Straumann® implant after 1974, you can order an appropriate prosthetic component through Straumann® Classic.
Straumann® Classic – An additional service for patients and dentists who trust Straumann® products.
For a smooth and rapid repeat restoration with Straumann® Classic components, contact Straumann and ask for our system experts.
Manufacturer Diener AG Precision Machining CH-8424 Embrach Switzerland
Exclusively distributed by Institut Straumann AG, CH-4002 Basel, Switzerland
PRO
STH
ETICS
STRAU
MA
NN
® CLA
SSIC
STRAUMANN® CLASSICINTRODUCTION
208
Various prosthetic reconstruction options are possible for new restorations of implants (1974–1999).
Prosthetic components and remanufactured Straumann® Classic components from this catalog are available for the implant types listed in this catalog. Straumann® Classic components are indicated by a “C” at the end of the article number.
Recommendation for repeat restorations Please use articles from the current Straumann® Product Catalog as a first choice; only use the Straumann® Classic products indicated by a “C” if you require specific characteristics.
PRO
STH
ETIC
SST
RAU
MA
NN
® C
LASS
IC
STRAUMANN® CLASSICGENERAL GUIDELINES
209
PRO
STH
ETICS
STRAU
MA
NN
® CLA
SSIC
210
STRAUMANN® CLASSICC, E, F, H AND K IMPLANT TYPES
Art. No. Article Dimensions Material
The following articles are required to restore these implant types with prosthetic components:
040.919C Classic Set, type C, E, F,H and Kset contents:Implant analog,Occlusal screw,9° impression cap,Gold coping
Stainlesssteel/Ti/Al/Ceramicor®*
* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.
� Manufactured from 1974 to 1980� Indications: These implant types were mainly used for bar solutions, but also for crown and bridge solutions
PRO
STH
ETIC
SST
RAU
MA
NN
® C
LASS
IC
211
STRAUMANN® CLASSICTPS IMPLANT TYPE, ONE-PART IMPLANT
Art. No. Article Dimensions Material
The following articles are required to restore these implant types with prosthetic components:
040.920C Classic Set, TPS implanttypeset contents:TPS implant analog,TPS occlusal screw,L 4 mm,TPS impression cap,TPS gold coping
Stainlesssteel/Ti/Al/Elitor®*
* = Elitor® is a precious metal alloy for soldering and laser welding of precious metal alloys.
� Manufactured from 1980 to 1996� Indication: This implant type was used for one-part bar solutions
PRO
STH
ETICS
STRAU
MA
NN
® CLA
SSIC
212
STRAUMANN® CLASSIC8° IMPLANT TYPE, ONE-PART IMPLANT
Art. No. Article Dimensions Material
The following articles are required to restore these implant types with prosthetic components:
040.921C Classic Set, 8° typeset contents:Implant analog for 8º barhead,SCS Occlusal screw,L 4 mm,Impression cap for 8º barhead,Implant protective cap for8º bar head,Gold coping
Stainlesssteel/Ti/Al/PEEK/Ceramicor®*
* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.
� Manufactured from 1994 to 1999� Indication: This implant type was used for bar solutions� Prosthetic restorations for monotype 8° implant also possible
PRO
STH
ETIC
SST
RAU
MA
NN
® C
LASS
IC
213
STRAUMANN® CLASSICBONEFIT 45° SHOULDER IMPLANT TYPE
The following articles are required to restore this implant type with prosthetic components:
Art. No. Article Dimensions Material
Restoration for fixed, cement-retained crowns and bridges
048.483C Abutment, angled 15º Ti
048.484C Abutment, angled 20º Ti
Restoration for fixed, screw-retained crowns and bridges
048.404C Octa abutment Height 1.5 mm Ti
Classic Set, Octa type
040.922C Classic Set, Octa typeset contents:RN implant analog,SCS Guide screw,Octa impression cap
Stainlesssteel/Ti/Al
Restoration for dentures — Bar on Octa abutment
048.404C Octa abutment Height 1.5 mm Ti
� Manufactured from 1989 to 1998� Indication: This implant type was used for screw-retained or cement-retained crowns, bridges, and telescopic and
bar solutions
For screw-retained repeat restorations, one impression set is required per implant.
synOcta® copings can be used according to current Straumann® Product Catalog.
LOCATOR® (article according to current Straumann® Product Catalog)
PRO
STH
ETICS
STRAU
MA
NN
® CLA
SSIC
214
STRAUMANN® CLASSIC30°/45° SHOULDER HOLLOW CYLINDER IMPLANTS WITH LABIAL BEVEL — WITH ANGULATION,WITHOUT ANGULATION
Art. No. Article Dimensions Material
The following articles are required to restore these implant types with prosthetic components:
048.483C Abutment, angled 15º Ti
048.484C Abutment, angled 20º Ti
� Manufactured from 1988 to 1995� Indication: This implant type was used for cement-retained crowns and bridges; for implants with angulation, the
placement of angled abutments is not recommended� Solid abutment (article according to current Straumann® Product Catalog)
PRO
STH
ETIC
SST
RAU
MA
NN
® C
LASS
IC
215
STRAUMANN® CLASSICOCTA IMPLANT, 45°, ONE-PART IMPLANT
Art. No. Article Dimensions Material
The following articles are required to restore these implant types with prosthetic components:
040.922C Classic Set, Octa typeset contents:RN implant analog,SCS Guide screw,Octa impression cap
Stainlesssteel/Ti/Al
� Manufactured from 1995 to 1999� Indication: this implant type was used for bar solutions
synOcta® copings can be used according to current Straumann® Product Catalog.
PRO
STH
ETICS
STRAU
MA
NN
® CLA
SSIC
216
STRAUMANN® CLASSICINSTRUMENTS AND OTHER COMPONENTS
Art. No. Article Dimensions Material
Instruments
046.045C Driver for Octa abutment Stainlesssteel
046.114C Cross-tip screwdriver Stainlesssteel
Other components that can be ordered
048.220C Plastic coping forabutment 8°
POM
048.232C TS gold coping for Octa Ceramicor®*
048.304C Occlusal screw Length 15 mm Ti
048.312C TPS occlusal screw Length 8 mm Ti
048.424C Pin abutment Ceramicor®*
048.448C TS post for Octa Ti
* = Ceramicor® is a non-oxidizing precious metal alloy for casting on precious metal alloys.
The application area for the instruments is given on the next page.
The application area for the components is given on the next page.
The following list gives an overview of which implant types each of the components can be used for.
For a smooth and rapid repeat restoration with Straumann® Classic components, contact Straumann and ask for our system experts.
Article Description C, E, F, H and K
TPS Mono 8° Octa post Octa TS post
Bonefit 45°
046.114C Cross-tip screwdriver
048.304C Occlusal screw, L 15 mm
048.312C TPS occlusal screw, L 8 mm
048.220C Plastic coping for abutment 8º
046.045C Driver for Octa abutment
048.448C TS post for Octa
048.404C Octa abutment, H 1.5 mm
048.232C TS gold coping for Octa
048.424C Pin abutment
048.483C Abutment, angled 15º
048.484C Abutment, angled 20°
(048.672) (synOcta® thread protection screw)
(049.154) (Transversal screw)
(046.420) (TS screwdriver)
PRO
STH
ETIC
SST
RAU
MA
NN
® C
LASS
IC
STRAUMANN® CLASSICAPPLICATION AREA FOR COMPONENTS
217