Upload
lehuong
View
219
Download
2
Embed Size (px)
Citation preview
XTRALIGHT™
LED Lighting Solutions
LED QUICK REFERENCE GUIDE
www.xtralight.com
Table of Contents
OUTDOOR INDOORPage Page
INDUSTRIALPage
™
LED Lighting Solutions
HIGH BAY ..............................................22-24
SPECIALTY HIGH BAY ...........................25
RECESSED ...................................................26
VAPOR TIGHT ............................................27
ROADWAY / STREET ................................2
AREA / SITE ..............................................3-4
WALL PACK ............................................... 5-7
FLOOD ..............................................................8
CANOPY ....................................................9-10
PARKING GARAGE .................................... 11
RETROFIT ...................................................... 12
RECESSED ..............................................14-15
SURFACE / SUSPENDED ......................16
COVE / CHANNEL .................................... 17
EMERGENCY / EXIT ................................18
RETROFIT .....................................................19
TUBE ...............................................................20
OUTDOORSOLUTIONS
™
LED Lighting Solutions 2
APPROVALS• ETL listed: Complies with UL 1598 and CSA C22.2
No. 250.0-08 Suitable for wet locations.• 3G Vibration Rated for Bridge/Overpass
Applications per ANSI C136.31-2010, Test Level 2.
COMPLIANCE• ANSI C136.2, .3, .10, .14, .15, .22, .25, .31, .37 and .41• ANSI/IES RP-8-14 Roadway Lighting• MSSLC Model Specification for LED Roadway
Luminaires v2 (2014)
PRODUCT PERFORMANCE
MODEL REPLACES LUMENS
CSRS36 & 52
Up to
150W HIDUp to
5,700
CSRM 75, 96, 125 & 150
Up to
400W HIDUp to
17,200
FEATURES • Operating temperature:
CSR-S -40°C to +45°C (-40°F to +113°F) CSR-M -40°C to +40°C (-40°F to +104°F)• Best in class Lumileds LEDs with 3000K (min 80 CRI),
4000K, 5000K and 5700K CCT (min 70 CRI).• Tool-free access to mounting and electrical components.• Controls ready luminaire is standard.• Distributions: Type II, Type III, Type IV and Type V.• Zero uplight (U0) is night sky friendly, reduces wasted light.• Optional backlight shielding.
CONSTRUCTION• Housing is a one-piece die-cast aluminum with integral
mounting for strength and durability.• Door is removable without tools and rear-hinged for
ease of installation and service.• LED boards and drivers are mounted directly to the
housing’s integral heat sink for thermal management.• No lens frame or secondary glass for maximum performance.• All fasteners are stainless steel.• Housing and door are protected with a thermoset
TGIC-polyester powder coat finish.
MOUNTING• Integral horizontal mast arm mounting for 1-1/4” to 2” IP
(1.66”-2.38”OD) for compatibility and ease of installation.• Horizontal orientation with internal +/- 5° adjustment for
leveling in 2.5° increments.• Bubble Level for lateral and longitudinal orientation
provides quick visual reference, speeding installation.• Bird guard for arm diameters smaller than 2” IP (2.38” OD).
Medium
Small
SMART ENGINEERING DESIGN
EASY TO INSTALLFLEXIBLE MOUNTING FEATURES
The Viento Area Light, our aesthetically sleek luminaire with excellent lumen performance just met its match! The Viento Wall Pack.
Product Family
3
™
LED Lighting Solutions 4
FEATURES• Operating temperature -40°C to +40°C
(-40°F to +104°F).
• Best in class Lumileds LEDs with 3000K (min 80 CRI), 4000K, 5000K and 5700K CCT (min 70 CRI).
• Distributions: Type II, Type III, Type IV and Type V. Types II, III, and IV available rotated right or left 90°, factory installed.
• Zero uplight (U0) is night sky friendly, reduces wasted light.
CONSTRUCTION• Housing: One-piece die-cast aluminum has integral
heat sink fins to optimize thermal management through conductive and convective cooling.
• The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.
• Housing and door are protected with a thermoset TGIC-polyester powder coat finish.
MOUNTING• Integral arm facilitates quick and easy installation.
• Stainless steel hardware fastens the integral arm securely to poles.
PRODUCT PERFORMANCE
MODEL REPLACES LUMENS
VNTM 100, 144 & 200
400W HID
> 21500
VNTL 231 & 300
1000W HID
> 32000
APPROVALS• ETL listed: Complies with UL 1598 and CSA C22.2
No. 250.0-08 Suitable for wet locations.
• 3G Vibration Rated for Bridge/Overpass Applications per ANSI C136.31-2010, Test Level 2.
• IP 66 Optics and Housing.
• Select models DLC Qualified. For a complete list of DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
Medium
Large
VNTS
VIENTO SMALLCOMING SOON
5™
LED Lighting Solutions
FEATURES• Optical grade polymer is UV stabilized and impact
resistant.
• IP66 rated LED light engines prevent dust and moisture from degrading performance.
• Distributions: Type II Short, Type II Medium, Type III Medium and Type IV Short.
• Best in class Lumileds LEDs with 3000K (min 80 CRI), 4000K, and 5000K CCT (min 70 CRI).
• Zero uplight (U0) is night sky friendly, reduces wasted light.
CONSTRUCTION• Housing: Two-piece die-cast aluminum has integral
heat sink fins to optimize thermal management through conductive and convective cooling.
• Housing and door are protected with a thermoset TGIC-polyester powder coat finish
• LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.
• Silicone gasket is included to prevent leakage and provide weather-tight protection.
• Custom colors available, consult factory.
• Emergency Battery Backup
• PIR Sensor
PRODUCT PERFORMANCE
MODEL CCT WATTS LUMENS
VNTW 5500L
4000K 55.7 5969
VNTW 8000L
4000K 79.6 8428
VNTW 11000L
4000K 102.3 10587
APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2
Suitable for Wet Locations
BronzeWhite
SMART ENGINEERING DESIGN
EASY TO INSTALLCONTEMPORARY APPEARANCE
™
LED Lighting Solutions 6
Wall Pack
APPROVALS• ETL listed*: Complies with UL1598 and CSA 22.2
Suitable for wet locations.• Select models DLC Qualified. For a complete list of
DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
• Lighting Facts listed*.
FEATURES • CCT: 4000K & 5000K. Other color temperature
options available.
• Energy-efficient replacement for HID.
• Rugged construction.
• Improved lumen maintenance over HID.
• Field serviceable fixture utilizing proprietary patented LED technology.
CONSTRUCTION LWP
• Housing is heavy-duty, die-cast aluminum.
• Finish - RoHS compliant, low-VOC, TGIC polyester bronze powder coat.
• High impact, heat resistant borosilicate glass lens is hinged and removable.
• Silicone gasket is included to prevent leakage and provide weather-tight protection.
OWP• Housing - Heavy-duty seam welded, 12 gauge (.080”
thick) 5052-H32 aluminum.
• Finish - RoHS compliant, low VOC. TGIC polyester powder coat. Custom colors available.
• Tempered glass lens sealed to faceplate, secured to housing with stainless hardware.
PRODUCT PERFORMANCE
MODEL REPLACESHID
WATTS LUMENS
LWP 25 100W 24.7 2558
LWP 50 175W 47.7 4251
LWP 72 400W 67.9 6356
LWP 100 400W 95.2 8153
OWP 150 400W 141.7 8947
*LWP only.
LWP 25 LWP 50 LWP 72/100 OWP
7™
LED Lighting Solutions
Wall Pack
FEATURES • Full cut off wall pack to minimize light trespass.
• CCT: 4000K & 5000K. Other color temperature options available.
• Energy-efficient replacement for up to 400W HID.
• Rugged construction.
• Improved lumen maintenance.
• Field serviceable fixture utilizing patented LED technology.
CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.
• Finish - RoHS compliant, low VOC, TGIC polyester bronze powder coat.
• Silicone gasket is included to prevent leakage and provide weather-tight protection.
FCW• Forward and side throw optics for maximum light
distribution.
• Shallow back flush mount.
• Clear tempered glass lens.
LSW• Deep back mount for conduit and emergency
backup options.
PRODUCT PERFORMANCE
MODEL REPLACES HID
WATTS LUMENS
FCWM 4500L
175W 67.1 6919
FCWL7000L
400W 47.0 4308
APPROVALS• ETL listed*: Complies with UL1598 and CSA 22.2.
Suitable for wet locations.• Select models DLC Qualified. For a complete list of
DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
• Lighting Facts listed.
*FCW only.
FCWM
FCWL LSW 67
LSW 36
MODEL REPLACESHID
WATTS LUMENS
LSW 36 70W 30.2 2537
LSW 67 175W 63.3 5419
™
LED Lighting Solutions 8
APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2
Suitable for wet locations.
• Select models DLC Qualified. For a complete list of DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
• Lighting Facts listed.
FEATURES • Energy-efficient replacement for up to a 100W HID.
• CCT 4000K & 5000K. Other color temperature options available.
• Improved lumen maintenance over HID.
• Field serviceable fixture utilizing proprietary patented LED technology.
CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.
• Finish - RoHS compliant, low VOC. TGIC polyester bronze powder coat.
• Impact resistant tempered glass lens sealed with a silicone gasket to prevent leakage and provide weather-tight protection.
PRODUCT PERFORMANCE
MODEL CCT WATTS LUMENS
LFLS-2500L 4000K 25.0 2736
LFLS-2500L 5000K 25.8 2779
LFLM-4500L 4000K 47.2 5089
LFLM-4500L 5000K 46.8 4644
LFLL-7500L 4000K 68.2 7769
LFLL-7500L 5000K 68.0 7567
LFLL-9000L 4000K 91.9 9729
LFLL-9000L 5000K 94.5 9893
Flood
LFL MediumLFL Small LFL Large
9™
LED Lighting Solutions
Canopy
APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2
Suitable for wet locations.• Select models DLC Qualified. For a complete list of
DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
• Lighting Facts listed.
PRODUCT PERFORMANCE
MODEL CCT WATTS LUMENS
CCLS-2000L 4000K 24.3 2283
CCLS-2000L 5000K 25.4 2232
CCLS-3000L 4000K 31.8 2827
CCLS-3000L 5000K 33.6 2819
CCLM-4500L 4000K 47.3 4490
CCLM-4500L 5000K 46.9 4504
FEATURES • Energy-efficient replacement for up to 175W HID.
• Surface mount for building entrances, walkways or canopies.
• CCT: 4000K & 5000K. Other color temperature options available.
• Exceptional lumen maintenance.
• Field serviceable fixture utilizing proprietary patented LED technology.
CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.
• Finish - RoHS compliant, low VOC. TGIC polyester bronze powder coat.
• Polycarbonate prismatic lens, injection molded, UV stabilized.
• Multiple 1/2” NPT access points for surface conduit or J-box mounting.
CCL Small CCL Medium
™
LED Lighting Solutions 10
CSC SSCFlat Lens
SSCDrop Lens
APPROVALS• Complies with UL1598 and CSA 22.2.• Select models DLC Qualified. For a complete list of
DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
FEATURES • Energy-efficient replacement for up to HID.
• CCT: 4000K & 5000K. Other color temperature options available.
• Rugged construction.
• Exceptional lumen maintenance.
• Suitable for damp locations. (CSC)
• Suitable for wet locations. (SSC)
• Field serviceable fixture utilizing proprietary patented LED technology.
CONSTRUCTION• Housing - pre-painted white aluminum (CSC).
• Finish - RoHS compliant, low VOC. TGIC polyester powder coat. Custom colors available. (SSC)
• Polycarbonate lens sealed to door frame.
PRODUCT PERFORMANCE
MODEL REPLACESHID
WATTS LUMENS
CSC 34 100W 36.5 3444
SSC 17 100W 16.5 1463
SSC 67 175W 64.7 4731
Canopy
11™
LED Lighting Solutions
Parking Garage
FEATURES • Diffused illumination offers visual comfort and
eliminates glare.
• Multiple lumen packages provide flexibility for a variety of lighting applications.
• Weather resistant and corrosion free construction with no exposed parts to corrode.
• Field serviceable fixture utilizing proprietary patented LED technology.
CONSTRUCTION GLL
• Housing is heavy-duty, die-cast aluminum.• Finish - RoHS compliant, low VOC. TGIC polyester
bronze powder coat. • Polycarbonate prismatic lens, injection molded, UV
stabilized.• Multiple 1/2” NPT access points for surface conduit
or J-box mounting.
VTE-GARAGE:• High impact polyester, fire retardant fiberglass
housing is NSF listed.
• Impact resistant diffuser secured to housing with plastic cam latches.
• Stainless steel latches available.
• Poured-in-place gasket and cam latches seal the enclosures from most hostile environments.
APPROVALS• ETL listed: Complies to ANSI/UL 1598/CSA 22.2.
Suitable for wet locations.• Select models DLC Qualified. For a complete list of
DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.
PRODUCT PERFORMANCE
MODEL REPLACESHID
WATTS LUMENS
GLL 52 175W 46.8 4650
VTE 17 75W 17.0 1651
VTE 25 100W 26.6 2250
VTE 42 150W 42.2 4062
VTE 67 200W 66.5 5722
GLL
VTE
™
LED Lighting Solutions 12
Outdoor Retrofit
FEATURES
• Retrofit Kits transform existing HID luminaires to highly efficient LED models without compromising the aesthetics of the original design. This solution is well suited for applications where the existing luminaire is in good condition and architecturally appealing.
• Retrofit kits have a 10-year warranty when a sample is submitted for testing.
• Energy-efficient.
• Exceptional light quality.
• DLC listing available upon request.
CONSTRUCTION
• High grade aluminum chassis.
• Replaceable, RoHS-compliant LED modules, utilize the chassis of the luminaire for heat dissipation for enhanced LED life.
PRODUCT PERFORMANCE
MODEL REPLACESHID
WATTS LUMENS
ARK 72 150W 71.8 7308
BRK 30 70W 30.0 2366
SRK 200 1000W 202.0 15920
SRK 300 1000W 275.9 27851
APPROVALS• Complies with UL 1598 and CSA 22.2
ARK SRKBRK