VIENTO LARGE - WILDLIFE FRIENDLY · VIENTO LARGE - WILDLIFE FRIENDLY VNTL WL LED APPROVALS • FWC #2019-115 • ETL listed. Complies with UL 1598 and CSA C22.2 No. 250.0-08 • Suitable

All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the most updated product specifications. XtraLight™ reserves the right to change specifications without notice.

PROJECT INFORMATION

Project Name

Catalog #

Date

Type

www.xtralight.com • (800) 678-6960 • [email protected] 201002

1

FEATURES• Outstanding photometric performance results in sites with

excellent uniformity, optimal pole spacing and lower power density.

• Optics are completely sealed against moisture and environmental contaminants (IP66).

• Low profile architectural design offers a contemporary appearance with excellent light output.

• Field serviceable luminaire utilizing Lumileds LED technology.

• Controls ready luminaire for independent operation or remote management.

• Operating temperature -40°C to +40°C (-40°F to +104°F).

CONSTRUCTION• Housing: One-piece die-cast aluminum has integral heat sink fins to

optimize thermal management through conductive and convective cooling.

• The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.

• Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min). This finish provides superior protection from corrosion and maximum environmental durability.

• Powder coat finish in bronze, white or custom colors (consult factory).

• Post painted matte black interior/fixture finish exterior wildlife shield standard to meet FWC requirements

MOUNTING• Integral arm with key hole slot facilitates quick and easy

installation.

• Nut plate eliminates loose hardware and reduces installation labor.

OPTICS• Precision molded optics for superior uniformity, minimal light

trespass and maximum pole spacing.

• Optical grade polymer is UV stabilized and impact resistant.

• IP66 rated LED light engines prevent dust and moisture from degrading performance.

• Distributions: Type II, Type III, Type IV and Type V. Types II, III, and IV available rotated right or left 90°, factory installed.

• Best-In-Class amber LEDs with a targeted spectrum at 590nm.

• Zero uplight (U0) is night sky friendly, reduces wasted light.

ELECTRICAL• Voltage: 120-277V 50/60Hz driver (standard); 347-480V 50/60Hz

driver (optional).

• Class 2 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate.

• Surge Protection: 20kA standard.

• NEMA twist-lock receptacle available as an option. (Note: Photocontrol or shorting cap required for operation not included).

• Dimming: 0-10v dimmable driver standard.

• Passive Infrared (PIR) Photo/Motion Sensor option available.

WARRANTY• 10-year limited warranty.

VIENTO LARGE - WILDLIFE FRIENDLYVNTL WL LED

APPROVALS• FWC #2019-115• ETL listed. Complies with UL 1598 and CSA C22.2 No. 250.0-08 • Suitable for wet locations.• 3G Vibration Rated for Bridge/Overpass Applications per ANSI

C136.31-2010, Test Level 2.• IP 66 Optics and Housing.

ROTATABLE

OPTICS

TEN YEAR

WARRANTY

APPLICATIONS• Ecologically sensitive areas• Sea turtle nesting beaches• Migratory Corridors• Dark-Sky friendly communities

• Parking Lots• Parks & Recreation Areas• Security Areas• Mall & Retail Spaces

PRODUCT PERFORMANCE

MODEL LUMENS WATTS EFFICACY

VNT-L-75-3M W/SHIELD 4146 77.1 53.8

VNT-L-75-5M W/SHIELD 3072 77.1 39.8

VNT-L-175-3M W/SHIELD 6225 173 36.0

VNT-L-175-5M W/SHIELD 4608 173 26.6

VNT-L-235-3M W/SHIELD 7346 235 31.3

VNT-L-235-5M W/SHIELD 5445 235 23.2

[Data based on 625nm diodes.]

ORDER LOGIC


2

VNTL-WL-LED 201002 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the

most updated product specifications. XtraLight™ reserves the right to change specifications without notice.

www.xtralight.com • (800) 678-6960 • [email protected]

L 03 R 20

MODULES OPTICS DRIVER SURGE MOUNT

03 2M Type II Medium DIM Dimmable Multi-Volt 120-277V

20 20kV/20kA (Std) X None

2S Type II Short HVD Dimmable 347-480V A Angle Mount3M Type III Medium4S Type IV Short5M Type V Square

Medium

SIZE MODEL ORIENTATION CCT CONTROLS COLOR

L Large 75 N Normal (Forward)

R Red 625nm X None (STD) BZ Bronze175 3 2 Twist-Lock Receptacle, 3-pin WH White235 R 1 Right 5 2 Twist-Lock Receptacle, 5-pin

L 1 Left 7 2 Twist-Lock Receptacle, 7-pinB FSP-211L3@20'MH/40'DIAD FSP-211L7@40’MH/100’DIA

Size & Model Combinations:

VNTL-WL-03-75VNTL-WL-03-175VNTL-WL-03-235

1. Not Available with 5M Optics2. Photocontrol not included.3. For FWC compliance, wildlife shield must be used.4. HS cannot be used with Wildlife Shield

Rotated Asymmetric Optics (Type II, Type III & Type IV)

Normal (3MN)

Top View

90° Left (3ML)

Top View

90° Right (3MR)

Top View

Street Side

House Side

Street Side

House Side

Street Side

House Side

29.00

13.75

6.46

29.00

13.75

6.46

29.00

13.75

6.46

Custom Colors Are Available

(Consult Factory)

Sample part no.: VNT L 03 235 3M N DIM A 20 X X BZ

OPTIONS

HS 3, 4 House Side ShieldRWS 3 Remove Wildlife

Shield

DISTRIBUTION TYPES Distance in units of mounting height values based on 25 ft. mounting height.

Type II Medium Type II Short Type III Medium Type IV Short Type V Square Medium

VNT

3





UNLESS OTHERWISE SPECIFIED:

TITLE:

NAME DATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

INTERPRET GEOMETRICTOLERANCING PER:

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONALANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL

PROPRIETARY AND CONFIDENTIAL


TITLE:

NAME DATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




DIMENSIONAL DATA

• Weight: 39 lbs

• 35.2” L x 13.8” W x 6.6” H

MOUNTING DATA DETAIL

SINGLE

EPA: 1.79 sq. ft.

Two at 90°

EPA: 2.68 sq. ft.

Two at 180°

EPA: 3.59 sq. ft.

Three at 90°

EPA: 4.47 sq. ft.

Four at 90°

EPA: 4.47 sq. ft.UNLESS OTHERWISE SPECIFIED:

TITLE:

NAMEDATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL


TITLE:

NAME DATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLE

SS O

THER

WIS

E SP

ECIF

IED

:

TITLE

:

NA

ME

DA

TE

Q.A

.

MFG

APP

R.

ENG

APP

R.

CHE

CKE

D

DRA

WN

INTE

RPRE

T G

EOM

ETRI

CTO

LERA

NC

ING

PER

:

DIM

ENSI

ON

S A

RE IN

INC

HES

TOLE

RAN

CES

:FR

AC

TION

AL

AN

GUL

AR:

MA

CH

B

END

TW

O P

LAC

E D

ECIM

AL

TH

REE

PLA

CE

DEC

IMA

L

PRO

PRIE

TARY

AN

D C

ON

FID

ENTI

AL


TITLE:

NAMEDATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL


TITLE:

NAMEDATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL


TITLE:

NAME DATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL


TITLE:

NAMEDATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN





TITLE:

NAME DATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN




UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL

UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL

DUAL SSA

EPA: 2.069 sq. ft.

Three at 120°

EPA: 3.84 sq. ft.


TITLE:

NAMEDATE

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH

BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL


UNLESS O

THERWISE SPEC

IFIED:

TITLE:

NA

ME

DA

TE

Q.A

.

MFG

APPR.

ENG

APPR.

CHEC

KED

DRA

WN

INTERPRET G

EOM

ETRICTO

LERAN

CIN

G PER:

DIM

ENSIO

NS A

RE IN IN

CHES

TOLERA

NC

ES:FRA

CTIO

NA

LA

NG

ULAR: M

AC

H BEN

D

TWO

PLAC

E DEC

IMA

L THREE PLA

CE D

ECIM

AL

PROPRIETARY AN

D CO

NFID

ENTIAL


TITLE:

NAMEDATE

Q.A.MFG APPR.ENG APPR.CHECKEDDRAWN

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH

BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL


4.00"

3.5

4"

R0.50"

R0.27"

1.6

8"

3.1

6"

R0.25"

6.4

6"

0.3

8"

1.3

9"

Back View

Top View

Bottom View

Side ViewFront View

Front View - Wildlife Shield Side View - Wildlife Shield

WS Option - Dropdown Wildlife Shield Post-Painted Black

4





LIGHTING CONTROLS

OPTION B FSP-211L3 20' Mounting Height 40' Diameter

OPTION D FSP-211L7 40’ Mounting Height 100’ Diameter

www.wattstopper.com8 0 0 . 8 7 9 . 8 5 8 5

Coverage

Dimensions of Lens Options

FSP-L3 top and side coverage patterns



FSP-L2 dimensions FSP-L3 dimensions FSP-L4 dimensions

0’ 3’ 6’ 12’ 27’30’

3’6’12’27’30’

20’ 20’

0’3’6’

3’6’

12’

27’

30’

12’

27’

20’

20’

60’

30’

0’

10’

20’

30’

40’0’ 6’ 12’ 30’6’12’20’ 20’

20’ 10’ 0’ 10’ 20’

0’

20’

10’

10’

20’

40’

0’3’ 9’6’3’6’9’12’ 12’

10’

20’

0’

15’

5’

15’18’20’ 15’ 18’ 20

0'

8'

0' 3'3' 7'7' 11'11' 24'24'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

60 ft

2.33”59.2mm

0.78”19.7mm

2.33”59.2mm

0.78”19.7mm

3.2”81.3mm

0.93”23.6mm

FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'

0'

27'

40'

50'50'50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

FSP-L7 dimensions

3.2”81.3mm

1.04”26.4mm

www.wattstopper.com8 0 0 . 8 7 9 . 8 5 8 5

Coverage

Dimensions of Lens Options




FSP-L2 dimensions FSP-L3 dimensions FSP-L4 dimensions

0’ 3’ 6’ 12’ 27’30’

3’6’12’27’30’

20’ 20’

0’3’6’

3’6’

12’

27’

30’

12’

27’

20’

20’

60’

30’

0’

10’

20’

30’

40’0’ 6’ 12’ 30’6’12’20’ 20’

20’ 10’ 0’ 10’ 20’

0’

20’

10’

10’

20’

40’

0’3’ 9’6’3’6’9’12’ 12’

10’

20’

0’

15’

5’

15’18’20’ 15’ 18’ 20

0'

8'

0' 3'3' 7'7' 11'11' 24'24'

30'

20'

10'

10'

20'

0'

10' 0' 10' 20'20'

60 ft

2.33”59.2mm

0.78”19.7mm

2.33”59.2mm

0.78”19.7mm

3.2”81.3mm

0.93”23.6mm

FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'

0'

27'

40'

50'50'50' 25' 0' 25' 50'

0'

50'

25'

25'

50'

100'

FSP-L7 dimensions

3.2”81.3mm

1.04”26.4mm

WWW.LEGRAND.US/WATTSTOPPER

WATTSTOPPER®FIXTURE SENSORS & CONTROLS

DescriptionThe FSP-211 mounts in an outdoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.

OperationTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On and Off based on the ambient light level so that lighting remains on overnight even without motion detection.

Wireless Handheld Configuration ToolInitial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to six sensor parameter profiles to speed configuration of multiple sensors.

ApplicationsThe slim, low-profile FSP-211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.

LINE VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUT-DOOR PHOTO/MOTION SENSOR

FSP-211

• Provides line voltage On/Off switching and 0-10 VDC dimming control

• Works with ballasts or LED drivers

• High and low modes fully adjustable from 0 to 10V

• Time delay from 5 to 30 minutes

• Optional cut off delay

• Adjustable ramp up and fade down times

• Optional daylighting setpoints feature automatic calibration, or permit manual adjustment

• Configuration tool stores six sensor profiles for quick setup and adjustment of multiple sensors

• Polycarbonate construction; flame retardant, UV resistant, impact resistant, recyclable

• UL244A and UL508; IP66 rated (when fully assembled and installed) for use in wet locations

• This product meets the materials restrictions of RoHS

• BAA/TAA-compliant models available

Features

Fully adjustable high and low dimmed light levels; optional

dusk to dawn control

Adjustable via handheld wireless configuration tool

Adjustable time delay and cut off delay

Designed for LED fixtures; rated for extreme

temperatures and up to 200,000 on/off cycles

IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’

Hold off setpoint with automatic calibration option

for convenience and added energy savings

WATTSTOPPER®

5




VIENTO LARGE - WILDLIFE FRIENDLYOPTIC ACCESSORY

HOUSE SIDE SHIELD OPTICS ACCESSORY

- HSS - -

ACCESSORY

HSS House Side Shield

OPTICS

N NormalLR Rotated

Optics

SIZE

SM SmallMED MediumLRG Large

VNT

FEATURES

• Significantly reduces backlight to minimize light trespass.

• Available for Type II Medium (2M), Type II Short (2S), Type III Medium (3M) and Type IV Short (4S) optics, both NORMAL and rotated LEFT/RIGHT.

• Factory installed as an option when ordered with the luminaire.

• Field installable (tool-free) when ordered as a separate accessory.

CONSTRUCTION

• Low-profile, precision fabricated CNC design.

• Flat black TGIC-polyester powder coat finish using tightly controlled multi-stage process to a uniform 3 mil thickness (min).

• This finish provides superior protection from corrosion and maximum environmental durability.

DIMENSIONS

• 11.38” L x 6.13” W x 0.4” H • Weight: 0.45 lbs

Medium Viento Shown With House Side Shield

Type II Medium + HSS Type II Short + HSS

Type III Medium + HSS Type IV Short + HSS

IES DISTRIBUTION TYPES

ORDER LOGIC

ISO Lines Distance in units of mounting height values based on 25 ft. mounting height.

.1

.2.5

1 2

.1.2

.51

2

5

.1

.2

.51

2

.1

.2

.5

1

2

Note: HSS cannot be used with Wildlife Shield.

6





MOUNTING ACCESSORIES

Standard in Bronze and White (custom colors available, consult factory).

The Round Pole Adapter allows for up to 4 Viento fixtures to be

mounted to one pole.

(3” dia. shown.)40° max.

NOTES:

1. Viento with ASF accessory needs to be ordered with "A" mounting code (see Ordering Guide for details)

2. Note: No more than 40° up angle.

Shoulder–to–Shoulder Adaptor

SSAEPA: 0.90 sq. ft. - 27 lbs

24”

15”

Wall Bracket

VNT-WB

1.53”

6.25”

4.75”

4.50”

6.00”

ø0.500”

Round Pole Adaptor

VNT-RPA 3” to 5” Diameter

EPA: 0.03 sq. ft. - 0.75 lbs.

Tenon Wall BracketHorizontal Mount

MS1676 8” Square Plate - 2 3⁄8” OD

Tenon Mount Adaptor - Square or Round

TMAS 4”/5”/6” SQ TMAR 4”/5” DIA*

EPA: 0.4 sq. ft. 10 - 16 lbs

*Requires Round Pole Adaptor VNT-RPA

Adjustable Slip Fitter

VNT-ASF (180° - 10° increments)

EPA: 0.127 sq. ft. - 6.0 lbs

Documents

VIENTO LARGE - WILDLIFE FRIENDLY · VIENTO LARGE - WILDLIFE FRIENDLY VNTL WL LED APPROVALS • FWC #2019-115 • ETL listed. Complies with UL 1598 and CSA C22.2 No. 250.0-08 • Suitable