Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
日煬科技有限公司JD Auspice Co., Ltd
JDA
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
IP67 Enclosure CatalogueCompressive property, Insulation, Free from corrosion
抗擠壓 / 絕緣 / 抗腐蝕
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
JDA box Ingress Protection Grade
JDA box Material
Characteristics of JDA box Plastic enclosure
How to choose JDA box's products
P Series
H Series - Medium and large size
H Series - Medium size
H Series - Small size
S Series - Medium size
S Series - Small size
M Series
Aluminium Die Casting Box
Dual door
All-in-one Dual door
Aluminium housing for inserting card
Cable Glands and Accessories
Page 03
Page 04
Page 05
Page 06-09
Page 10-11
Page 12-13
Page 14-15
Page 16-17
Page 18-19
Page 20-21
Page 22-23
Page 24
Page 25
Page 26
Page 27
Page 28-33
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
IEC(International Electrotechnical Commission)
defines protection structure ofelectric instruments or protectionboxes as follows.
Second No. Protection against solidProtection code
FirstNumber
SecondNumber
IKCodeProtection againist solid
No protection No protection No protection
Impact= <1 joule
Impact= 1 joule
Impact= 2 joule
Impact= 5 joule
Impact= 10 joule
Impact= 20 joule
Protected againstsolid objects up to50mm, e.g. accidentaltouch by hands.
Protected againstvertically fallingdrops of water e.g.condensation.
Protected againstdirect sprsys ofwater up to 15°from the vertical
Protected againstdirect sprays ofwater up to 60°from the vertical.
Protecion againstwater sprays fromall directions olimited ingresspermitted.
Protected againstlow pressure jets ofwater, from alldirections o limitedingress.
Protected againstlow pressure jets ofwater, e.g. lor useon ship decks-limitedingress permitted
Protected againstthe effect ofimmersion between15cm and 1mm
Protected againstlong periods ofimmersion underpressure.
Protected against solid objects up to12mm, e.g. fingers.
Protected against solid objects over2.5mm(tools and wires).
Protected against solid objects over1 mm(tools , wires and amall wire).
Protected against dust imited ingress(no harmful deposit)
Totally protectedagainst dust
Protection againist liquids Protection againistmechanical impact
• JDA box has tested the enclosures according to IEC 529 or EN 60529 and EN 50298.
TEST TEST TESTIP IP IP
IK impact testFirst No. Protection against solid
IP (International Protection) TEST
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
0
01
05
06
07
08
09
10
JDA box Ingress Protection GradeWater, dust-proof grade IP66/67, Degree of strength IK07/08
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
It has few decolorization and discoloration even used for a long time at outside owing toaddition of Ultraviolet Stabilizer.It protects electric/eletronic instruments by using the material with addition of static electricityprotecting material.It is easy to make without breakage in hole and press process and it is very strong againstoutside impact as it is made of high impact resistant material.We can supply optimized products which will be made of ordered material you requestconsidering purpose and area used besides standard spectification.
ABS (Grey color) : 94-HB(Standard) or 94-V-O (Options applied for terminal block)ABS (Garish Blue color) : 94-5VB or 94-V-OPC/ABS: 94-5VAPC (Transparent) : 94-HB(Standard) or 94-V-O (Options applied for terminal block)PC (Grey) : 94-V-O
ABS :Acrylonitrile Butadiene StyrenePC/ABS :Polycarbonate+ Acrylonitrile Butadiens StyrenePC (Transparent) : PolycarbonatePC (Grey) : Polycarbonate or Polycarbonate+ Glass FiberPBT/PC: Polybutylene Terephthalate + Polycarbonate
JDA-AGP, AGH, AGS, AGM: Cover(ABS), Base(ABS)JDA-PGP, PGH, PGS, PGM: Cover(PC/ABS), Base(PC/ABS)JDA-CGP, CGH, CGS, CGM: Cover(PC), Base(PC)
JOA-ATP, ATH, ATS, ATM: Cover(PC), Base(ABS)JDA-PTP, PTH, PTS, PTM: Cover(PC), Base(PC/ABS)JDA-CTP, CTH, CTS, CTM: Cover(PC), Base(PC)
Features of plastic material of JDA box
Combustion retardant property of JDA box plastic material
Materials of JDA plastic products
Plastic materials by model
1.
2.
3.
4.
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Characteristics of JDA box plastic enclosureP series-draw latch,integrated hinge
P series-roof function
H series-SUS Latch
H series-SUS Hinge
H series-Rubber washer
S series-Cover bolf connecting part
S series-Slide marking
S series-General marking
M series-Screw type
Bracket attachment pret
SUS bracket
Back panel connecting part
Plastic Back Panel
Key ring
Lock
Plastic lock
P series-draw latch lock
Gasket
It is very strong,easy to remove cover and con-venient to make hole or print as main parts of draw latch are made of stainless steel andhinge is made of plastic in integrated type.
It is protruded at base. It protects penet-ration of water at ordinary times and penet-ration of dust when opening/closing the cover.
It prevents loosening by vibration etc.It has double lock system
To ensure durability sus hinge has variousapplication to each size of enclosure
It is used for water proofing or dust proofing in installation of hinge,draw latch or other parts.
It was made to make hold only with small. drill in installation of hinge or draw latch.
It has excellent airtightness due to accurate puncture on marking part in installation of hinge or draw latch
It is designed to have lower surface of the cover considering attachment of mambrace keyboard.
It is strong as screw thread was made in injection molding.
If helps to fix the box tightly as brass insert is inserted in injection molding
You can use this bracket to fix the box at the wall
Inner panel equipped with heavy parts can be fixed tightly as brass insert is inserted in injection molding
It is easy to make hole and it has excellent insulation properly. It is made to be strong with ABS material.
It can hang a lock on enclosure.
Embedded lock
Water proof lock
It is intergrated with draw and key lock for P type
It has excellent water and dust proofing perfomance as it injects gasket solution with super precise CNC robot machine
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
JDA– H–222712JDA– H–272212JDA– H–203015JDA– H–302015JDA– H–203018JDA– H–302018JDA– H–253515JDA– H–352515JDA– H–304015JDA– H–403015JDA– H–304018JDA– H–403018JDA– H–354516JDA– H–453516JDA– H–354520JDA– H–453520JDA– H–405020JDA– H–504020JDA– H–406023JDA– H–604023
JDA– H–191913JDA– H–192813
P Series
P Series H Series - Medium and large size
H Series - Medium size
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285
225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230
190×190×130190×280×130
90×120× 7090×120× 85
100×150× 70100×150× 85110×210× 75110×210×100110×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180
How to choose JDA box's products
JDA– P–354512JDA– P–354516JDA– P–354520JDA– P–405016JDA– P–405020JDA– P–406018JDA– P–406023JDA– P–506018JDA– P–506025JDA– P–507018JDA– P–507025JDA– P–608018JDA– P–608028
JDA– P–091207JDA– P–091208JDA– P–101507JDA– P–101508JDA– P–112107JDA– P–112110JDA– P–112607JDA– P–112610JDA– P–131508JDA– P–131808JDA– P–131810JDA– P–151509JDA– P–151512JDA– P–162110JDA– P–162113JDA– P–162610JDA– P–162613JDA– P–172211JDA– P–172711JDA– P–192810JDA– P–192814JDA– P–203013JDA– P–203015JDA– P–203018JDA– P–212110JDA– P–212113JDA– P–253515JDA– P–253518JDA– P–282813JDA– P–283813JDA– P–303015JDA– P–303018JDA– P–304012JDA– P–304015JDA– P–304018JDA– P–353515JDA– P–353518
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
JDA– H–281913JDA– H–192818JDA– H–281918JDA– H–193813JDA– H–381913JDA– H–193818JDA– H–381918JDA– H–282813JDA– H–283413JDA– H–342813JDA– H–283813JDA– H–382813JDA– H–283818JDA– H–382818JDA– H–285613JDA– H–562813JDA– H–334318JDA– H–433318JDA– H–385618JDA– H–563818
H Series - Medium size
S Series - Medium size
H Series - Small size
H Series - Small size
S Series - Small size
MODEL Width×Length×Heihht MODEL WidthxLengthxHeihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180
JDA– H–151510JDA– H–152007JDA– H–201507JDA– H–152010JDA– H–201510JDA– H–152013JDA– H–201513JDA– H–152016JDA– H–201516JDA– H–152510JDA– H–251510JDA– H–152513JDA– H–251513JDA– H–202010JDA– H–202013JDA– H–202016
JDA– S–191913JDA– S–192813JDA– S–192818JDA– S–193813JDA– S–193818JDA– S–282813JDA– S–283413JDA– S–283813JDA– S–283818JDA– S–285613JDA– S–334318JDA– S–385618
150×150×100150×200× 75200×150× 75150×200×100200×150×100150×200×130200×150×130150×200×160200×150×160150×250×100250×150×100150×250×130250×150×130200×200×100200×200×130200×200×160
190×190×130190×280×130190×280×180190×380×130190×380×180280×280×130280×340×130280×380×130280×380×180280×560×130330×430×180380×560×180
JDA– S–050604JDA– S–050605JDA– S–060905JDA– S–071005
50× 65×4550× 65×5565× 95×5575×105×55
JDA– H–081107JDA– H–110807JDA– H–081108JDA– H–110808JDA– H–081307JDA– H–130807JDA– H–081308JDA– H–130808JDA– H–081807JDA– H–180807JDA– H–081808JDA– H–180808JDA– H–082507JDA– H–250807JDA– H–082508JDA– H–250808JDA– H–101007JDA– H–101010JDA– H–121207JDA– H–121210JDA– H–121707JDA– H–171207JDA– H–121710JDA– H–171210JDA– H–141709JDA– H–171409JDA– H–142309JDA– H–231409JDA– H–151507
80×110× 70110× 80× 70 80×110× 85110× 80× 85 80×130× 70130× 80× 70 80×130× 85130× 80× 85 80×180× 70180× 80× 70 80×180× 85180× 80× 85 80×250× 70250× 80× 70 80×250× 85250× 80× 85100×100× 75100×100×100125×125× 75125×125×100125×175× 75175×125× 75125×175×100175×125×100140×170× 95170×140× 95140×230× 95230×140× 95150×150× 75
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
S Series - Small size
Aluminium Box
M Series
Dual door
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
MODEL Width×Length×Heihht
JDA– S–080806JDA– S–081104JDA– S–081107JDA– S–081108JDA– S–081307JDA– S–081308JDA– S–081605JDA– S–081608JDA– S–081807JDA– S–081808JDA– S–082507JDA– S–082508JDA– S–101007JDA– S–101010JDA– S–101807JDA– S–102007JDA– S–102307JDA– S–121207JDA– S–121210JDA– S–121707JDA– S–121710JDA– S–141709JDA– S–142309JDA– S–151507JDA– S–151510JDA– S–152007JDA– S–152010JDA– S–152013JDA– S–152016JDA– S–152510JDA– S–152513JDA– S–161607JDA– S–202010JDA– S–202013JDA– S–202016
JDA– M–081303JDA– M–081306JDA– M–081307JDA– M–081308JDA– M–081310JDA– M–081312JDA– M–131303JDA– M–131306JDA– M–131803JDA– M–131806JDA– M–151806JDA– M–181806JDA– M–181807JDA– M–181810JDA– M–181812JDA– M–182507JDA– M–182510JDA– M–182512
JDA– P–203013JDA– P–203015JDA– P–203018JDA– P–253515JDA– P–253518JDA– P–282813JDA– P–283813JDA– P–303015JDA– P–303018JDA– P–304015JDA– P–304018JDA– P–354516JDA– P–354520JDA– P–405016JDA– P–405020JDA– P–405020JDA– P–406018JDA– P–406018JDA– P–406023JDA– P–506018JDA– P–506025
80× 80× 60 80×110× 45 80×110× 70 80×110× 85 80×130× 70 80×130× 85 80×160× 55 80×160× 85 80×180× 70 80×180× 85 80×250× 70 80×250× 85100×100× 75100×100×100100×185× 70100×200× 70100×230× 70125×125× 75125×125×100125×175× 75125×175×100140×170× 95140×230× 95150×150× 75150×150×100150×200× 75150×200×100150×200×130150×200×160150×250×100150×250×130160×160× 70200×200×100200×200×130200×200×160
64× 98× 34 80× 75× 57 80×125× 57 80×175× 57 80×250× 57100×100× 80100×160× 80120×122× 80120×220× 80120×220× 90150×132× 90160×160× 90160×260× 90180×180×100230×200×100
80×130× 35 80×130× 60 80×130× 75 80×130× 85 80×130×100 80×130×125130×130× 35130×130× 60130×180× 35130×180× 60150×180× 60180×180× 60180×180× 75180×180×100180×180×125160×255× 75180×255×100180×255×125
200×300×130200×300×150200×300×180250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×150300×400×180350×450×160350×450×200400×500×160400×500×200400×500×200400×600×180400×600×180400×600×230530×630×185530×630×255
JDA–AL–061003JDA–AL–080806JDA–AL–081306JDA–AL–081806JDA–AL–082506JDA–AL–101008JDA–AL–101608JDA–AL–121208JDA–AL–122208JDA–AL–122209JDA–AL–151309JDA–AL–161609JDA–AL–162609JDA–AL–181810JDA–AL–232011
JDA Aluminium Die Casting box
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
MODEL Width×Lebgtg×Height
MODEL Width×Lebgth×HeightJDA aluminium housing for inserting Card
JDA–MPG(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
(Φmm) MODEL (Φmm) MODEL
Article no Article no Article no Article no
Article no Article no Article no Article no
JDA–PKM–P
JDA–HSM–EX–P
JDA–RG–PG
JDA–M
JDA–BP–M
JDA–MM
JDA–SP–PG
JDA–SP–M JDA–MSP–PG
JDA–PG
JDA–PG–L
JDA–BP–PG
JDA–MSP–PG JDA–HP–PG JDA–DPM–P
JDA–HSK–EX–P
250×350×160250×350×190350×450×130350×450×170350×450×210
GD–253516GD–253519GD–354513GD–354517GD–354221
JDA–ALC–111609JDA–ALC–172011
JDA–MPG– 7JDA–MPG– 9JDA–MPG–11JDA–MPG–13JDA–MPG–16
JDA–PKM–P7JDA–PKM–P9
JDA–HSK–EX–P7JDA–HSK–EX–P9JDA–HSK–EX–P11JDA–HSK–EX–P13JDA–HSK–EX–P16
JDA–HSM–EX–P7JDA–HSM–EX–P9JDA–HSM–EX–P11JDA–HSM–EX–P13JDA–HSM–EX–P16
JDA–RG–PG7JDA–RG–PG9JDA–RG–PG11JDA–RG–PG16
JDA–M–12JDA–M–16JDA–M–20JDA–M–25
JDA–BP–M–12JDA–BP–M–16
JDA–BP–M–20JDA–BP–M–25
JDA–MM–12JDA–MM–16JDA–MM–20JDA–MM–25
JDA–SP–PG – 7JDA–SP–PG – 9JDA–SP–PG – 11JDA–SP–PG –13.5JDA–SP–PG – 16JDA–SP–PG – 21JDA–SP–PG – 29JDA–SP–PG – 36JDA–SP–PG – 42JDA–SP–PG – 48
JDA–MSP–PG – 7JDA–MSP–PG – 9JDA–MSP–PG – 11JDA–MSP–PG –13.5JDA–MSP–PG – 16JDA–MSP–PG – 21JDA–MSP–PG – 29JDA–MSP–PG – 36JDA–MSP–PG – 42JDA–MSP–PG – 48
JDA–HP–PG 8JDA–HP–PG10JDA–HP–PG13JDA–HP–PG16JDA–HP–PG19JDA–HP–PG22JDA–HP–PG26JDA–HP–PG30
JDA–SP–M–12JDA–SP–M–16JDA–SP–M–18JDA–SP–M–20JDA–SP–M–22JDA–SP–M–25
JDA–PG–7–GJDA–PG–9–GJDA–PG–11–GJDA–PG–13.5–GJDA–PG–16–GJDA–PG–19–GJDA–PG–21–G
JDA–PG–7L–GJDA–PG–9L–GJDA–PG–11L–G
JDA–BP–PG7JDA–BP–PG9JDA–BP–PG11
JDA–BP–PG13.5JDA–BP–PG16JDA–BP–PG21
3.5~64~85~10
3~5.58~4.56~10
JDA–PG–13.5L–GJDA–PG–16L–G
6~1210~14
7~12.58.5~1412.5~18
JDA–PG–25–GJDA–PG–29–GJDA–PG–36–GJDA–PG–42–GJDA–PG–48–GJDA–PG–63–G
3~64~85~106~1210~1412~1513~18
15~1918~2522~3230~3834~4442~50
JDA–MSP–M 7JDA–MSP–M 9JDA–MSP–M 11JDA–MSP–M13.5JDA–MSP–M 16JDA–MSP–M 21
JDA–SP–M–27JDA–SP–M–32JDA–SP–M–40JDA–SP–M–50JDA–SP–M–63
JDA–MSP–M29JDA–MSP–M36JDA–MSP–M42JDA–MSP–M48
JDA–DPM–P 7JDA–DPM–P 9JDA–DPM–P11JDA–DPM–P13JDA–DPM–P16JDA–DPM–P21JDA–DPM–P29JDA–DPM–P36JDA–DPM–P42JDA–DPM–P48
JDA–MM–32JDA–MM–40JDA–MM–50JDA–MM–63
JDA–M–32JDA–M–40JDA–M–50JDA–M–63
JDA–RG–PG21JDA–RG–PG29JDA–RG–PG36
JDA–HSK–EX–P21JDA–HSK–EX–P29JDA–HSK–EX–P36JDA–HSK–EX–P42JDA–HSK–EX–P48
JDA–HSM–EX–P21JDA–HSM–EX–P29JDA–HSM–EX–P36JDA–HSM–EX–P42JDA–HSM–EX–P48
JDA–PKM– P11JDA–PKM– P13
JDA–MPG–21JDA–MPG–29JDA–MPG–36JDA–MPG–42JDA–MPG–48
13~1818~2522~3222~3837~44
3~6.54~8
5~106~12
8~14
6~88~10
3~6.54~8
5~106~128~14
3~6.54~8
5~106~128~14
3~55~7
7~1010~14
3~6.54~8
6~1213~18
3~6.54~8
6~1213~18
3~6.54~8
13~1818~2522~3230~3837~44
13~1818~2522~3230~3837~44
14~2020~2626~35
15~2522~3232~3837~44
15~2518~2532~3837~44
6~1213~18
10~1212~14
111.5×166×91.5 173×206×113
All - In - One - Dual door
JDA box aluminium housing for inserting card
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
90×120× 70 90×120× 85100×150× 70100×110× 85110×210× 75110×210×100100×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285
9090100100110110110110135135135150150160160160160170170190190200200200210210250250280280300300300300300350350350350350400400401401530530530530630630
77.577.587.587.587.787.787.787.7115108108130130137137144.6144.6149.6149.6173.5173.5181.8181.8181.8192.3192.3231.8231.8264.1264.1283.3283.3275.5275.5275.5333.8333.8325.4325.4325.4370.5370.5370.5370.5487.4487.4487.4487.4581.9581.9
50506060707070701059595120120120120120120132132148148152152152170170202202238238252252252252252302302300300300352352352352462462462462562562
0000000000000000000120120129129129120120180180210210230230228228228270270274274274328328328328426426426426526526
128.4128.4158.4158.4218.4218.4268.4268.4150193.4193.4150150218.4218.4268.4268.4228.4278.4288.4288.4308.4308.4308.4218.4218.4358.4358.4288.4388.4305.4308.4408.4408.4408.4358.4358.4457.4457.4457.4511.4511.4611.4611.4641.4641.4741.4741.4841.4841.4
8080110110170170220220119.3145145120120170170220220182232238238252252252170170302302238338252252352352352302302400400400452452552552562562662662762762
69699999158158208208110140140110110160160210210160210210210226226226150150271271210310219219325325325270270365365365428428525525526526626626726726
5065506555805580656580701007510575105808070110100120150751051201501001001201509012015012015090130170130170150200150220150220150250
2020202020202020202020202025252525303030303030302525303030303030303030303030303030303030353535353535
51.566.551.566.556.581.556.581.567.567.582.571.5101.581.5111.585.5111.59393108.5128.5108128.5158.581.5111.5130160108108131.5161.598.5128.5158.513216298138178137178158208163233163233163253
P Series
The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.
Division W1 W2 W3 W4 H1 H2 H3 D1 D2 D3SIZE
Dimension ( allowable error ± 1mm)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
90×120× 7090×120× 85
100×150× 70100×150× 85110×210× 75110×210×100110×260× 75110×260×100135×155× 85135×185× 85135×185×100150×150× 90150×150×120160×210×100160×210×130160×260×100160×260×130170×220×110170×270×110190×280×100190×280×140200×300×130200×300×150200×300×180210×210×100210×210×130250×350×150250×350×180280×280×130280×380×130300×300×150300×300×180300×400×120300×400×150300×400×180350×350×150350×350×180350×450×120350×450×160350×450×200400×500×160400×500×200400×600×180400×600×230530×630×185530×630×255530×730×185530×730×255630×830×185630×830×285
0912S0912S1015S1015S112151121S1126S1126S1315S1318S1318S1515S1515S1621S1621S1626S1626S1722S1727S1928S1928S2030S2030S2030S2121S2121S2535S2535S2828S2838S3030S3030S3040S3040S3040S3535S3535S3545S354553545S4050S4050S4060S4060S5060S5060S5070S5070S6080S6080S
0912P0912P1015P1015P1121P1121P1126P1126P1315P1318P1318P1515P1515P1621P1621P1626P1626P1722P1727P1928P1928P2030P2030P2030P2121P2121P2535P2535P2828P2838P3030P3030P3040P3040P3040P3535P3535P3545P3545P3545P4050P4050P4060p4060P5060P5060P5070P5070P
6565656588888585101113113123123129129129129129129159159166166166179179216216248248262262265265265320320306306306358358358358450450450450550550
9595115115189189232232126161161123123179179224224179224248248266266266179179316316248348262262365365365320320407407407458458558558555555655655755755
1.It is designed to prevent the penetration of rain or dust perfectly double as roof is protruded from top and bottom of the base.2.It is easy to separate cover and base so that user can attach or detach them for processing and printing.3.Insert hinge into the product and hinge connecting pin and important parts of draw latch are made of stainless steel so that it is very strong and corrosion resistant.
Product Characteristics
Accessories
Model and size(cover included) Product model Plate Model Plate Size Width×Length
×Height(mm)
Width×Length×Height(inch)
SteeImounting
plate 1.6mm
Plasticmountingplate 3-4.5mm
ABS PC/ABS PCM1 M2-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT 3.54× 4.72× 2.76 3.54× 4.72× 3.35 3.94× 5.91× 2.76 3.94× 5.91× 3.35 4.33× 8.27× 2.95 4.33× 8.27× 3.94 4.33×10.24× 2.95 4.33×10.24× 3.94 5.12× 5.91× 3.35 5.12× 7.09× 3.35 5.12× 7.09× 3.94 5.91× 5.91× 3.54 5.91× 5.91× 4.72 6.3 × 8.27× 3.94 6.3 × 8.27× 5.12 6.3 ×10.24× 3.94 6.3 ×10.24× 5,12 6.69× 8.66× 4.33 6.69×10.63× 4.33 7.48×11.02× 3.94 7.48×11.02× 5.51 7.87×11.81× 5.12 7.87×11.81× 5.91 8.27× 8.27× 3.94 8.27× 8.27× 5.12 7.87×11.81× 7.09 9.84×13.78× 5.91 9.84×13.78× 7.0911.02×11.02× 5.1211.02×14.96× 5.1211.81×11.81× 5.9111.81×11.81× 7.0911.81×15.75× 4.7211.81×15.75× 5.9111.81×15.75× 7.0913.78×13.78× 5.9113.78×13.78× 7.0913.78×17.72× 4.7213.78×17.72× 6.3013.78×17.72× 7.8715.75×19.69× 6.3015.75×19.69× 7.8715.75×23.62× 7.0915.75×23.62× 9.0620.87×24.80× 7.2820.87×24.80×10.0420.87×28.74× 7.2820.87×28.74×10.0424.80×32.68× 7.2824.80×32.68×11.22
JDA-A P-091207JDA-A P-091208JDA-A P-101507JDA-A P-101508JDA-A P-112107JDA-A P-112110JDA-A P-112607JDA-A P-112610JDA-A P-131508JDA-A P-131808JDA-A P-131810JDA-A P-151509JDA-A P-151512JDA-A P-162110JDA-A P-162113JDA-A P-162610JDA-A P-162613JDA-A P-172211JDA-A P-172711JDA-A P-192810JDA-A P-192814JDA-A P-203013JDA-A P-203015JDA-A P-203018JDA-A P-212110JDA-A P-212113JDA-A P-253515JDA-A P-253518JDA-A P-282813JDA-A P-283813JDA-A P-303015JDA-A P-303018JDA-A P-304012JDA-A P-304015JDA-A P-304018JDA-A P-353515JDA-A P-353518JDA-A P-354512JDA-A P-354516JDA-A P-354520JDA-A P-405016JDA-A P-405020JDA-A P-406018JDA-A P-406023JDA-A P-506018JDA-A P-506025JDA-A P-507018JDA-A P-507025JDA-A P-608018JDA-A P-608028
JDA-P P-091207JDA-P P-091208JDA-P P-101507JDA-P P-101508JDA-P P-112107JDA-P P-112110JDA-P P-112607JDA-P P-112610JDA-P P-131508JDA-P P-131808JDA-P P-131810JDA-P P-151509JDA-P P-151512JDA-P P-162110JDA-P P-162113JDA-P P-162610JDA-P P-162613JDA-P P-172211JDA-P P-172711JDA-P P-192810JDA-P P-192814JDA-P P-203013JDA-P P-203015JDA-P P-203018JDA-P P-212110JDA-P P-212113JDA-P P-253515JDA-P P-253518JDA-P P-282813JDA-P P-283813JDA-P P-303015JDA-P P-303018JDA-P P-304012JDA-P P-304015JDA-P P-304018JDA-P P-353515JDA-P P-353518JDA-P P-354512JDA-P P-354516JDA-P P-354520JDA-P P-405016JDA-P P-405020JDA-P P-406018JDA-P P-406023JDA-P P-506018JDA-P P-506025JDA-P P-507018JDA-P P-507025JDA-P P-608018JDA-P P-608028
JDA-C P-091207JDA-C P-091208JDA-C P-101507JDA-C P-101508JDA-C P-112107JDA-C P-112110JDA-C P-112607JDA-C P-112610JDA-C P-131508JDA-C P-131808JDA-C P-131810JDA-C P-151509JDA-C P-151512JDA-C P-162110JDA-C P-162113JDA-C P-162610JDA-C P-162613JDA-C P-172211JDA-C P-172711JDA-C P-192810JDA-C P-192814JDA-C P-203013JDA-C P-203015JDA-C P-203018JDA-C P-212110JDA-C P-212113JDA-C P-253515JDA-C P-253518JDA-C P-282813JDA-C P-283813JDA-C P-303015JDA-C P-303018JDA-C P-304012JDA-C P-304015JDA-C P-304018JDA-C P-353515JDA-C P-353518JDA-C P-354512JDA-C P-354516JDA-C P-354520JDA-C P-405016JDA-C P-405020JDA-C P-406018JDA-C P-406023JDA-C P-506018JDA-C P-506025JDA-C P-507018JDA-C P-507025JDA-C P-608018JDA-C P-608028
Steel mounting plate(Zinc plating)
Plastic mounting plate(ABS)
Key ring(K40)
Locker(SK)
Plastic locker(PK)
Wall mounting bracket(B40, B50, B60)
Vent(V60, V80)
Plastic bracket(PB20, 25)
JDA-PSK
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
H Series - Medium and large size
Dimension ( allowable error± 1mm) The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.
DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size
225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230
225276200300200300250350300400300400350450350450402502402602
219270180280180280230330280380280380323423323423375475375575
204.6234152252152252206306252352252352298398298398352452352552
183210129226129226180269230325230325276376276376328428328525
276225300200300200350250400300400300450350450350502402602402
270219280180280180330230380280380280423323423323475375575375
234204252152252152306206352252352252398298398298452352552352
210183226129226129269180325230325230376276376276428328525328
9090
120120150150120120120120150150130130170170170170200200
3030303030303030303030303030303030303030
9898
128.5128.5158.5158.5128.5128.5128128158158138138178178178178208208
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
1. It will not be damaged even using for a long time because stainless steel hinge and draw latch are equipped.
2. It secures perfect airtightess by preventing sink down when opening or closing by increasing the sizes of hinge and draw latch by size increasing of the products.
3. It can be used in inferior dangerous industrial field by using strong material and structure.
Product Characteristics
Accessories
Model and sizeModel and size(cover included) Product model Plate Model Plate Size
Width×Length×Height
(mm)
Width×Length×Height(inch)
SteeImounting
plate 1.6mm
Plasticmountingplate 3-4.5mm
ABS PC/ABS PC
M1 M2-Grey Cover G-Transparent CoverT
-Grey Cover G-Transparent CoverT
-Grey Cover G-Transparent CoverT
225×275×120275×225×120200×300×150300×200×150200×300×180300×200×180250×350×150350×250×150300×400×150400×300×150300×400×180400×300×180350×450×160450×350×160350×450×200450×350×200400×500×200500×400×200400×600×230600×400×230
2227S2227S2030S2030S2030S2030S2535S2535S3040S3040S3040S3040S3545S3545S3545S3545S4050S4050S4060S4060S
600×400×230 is for non water proof product.
2227P2227P2030P2030P2030P2030P2535P2535P3040P3040P3040P3040P3545P3545P3545P3545P4050P4050P4060P4060P
190190166166166166216216265265265265306306306306358358358358
242242266266266266316316365365365365407407407407458458558558
8.86×10.83×4.7210.83×8.86×4.727.87×11.81×5.9111.81×7.87×5.917.87×11.81×7.0911.81×7.87×7.099.84×13.78×5.9113.78×9.84×5.9111.81×15.75×5.9115.75×11.81×5.9111.81×15.75×7.0915.75×11.81×7.0913.78×17.72×6.3017.72×13.78×6.3013.78×17.72×7.8717.72×13.78×7.8715.75×19.69×7.8719.69×15.75×7.8715.75×23.62×9.0623.62×15.75×9.06
JDA-A H-222712JDA-A H-272212JDA-A H-203015JDA-A H-302015JDA-A H-203018JDA-A H-302018JDA-A H-253515JDA-A H-352515JDA-A H-304015JDA-A H-403015JDA-A H-304018JDA-A H-403018JDA-A H-354516JDA-A H-453516JDA-A H-354520JDA-A H-453520JDA-A H-405020JDA-A H-504020JDA-A H-406023JDA-A H-604023
JDA-P H-222712JDA-P H-272212JDA-P H-203015JDA-P H-302015JDA-P H-203018JDA-P H-302018JDA-P H-253515JDA-P H-352515JDA-P H-304015JDA-P H-403015JDA-P H-304018JDA-P H-403018JDA-P H-354516JDA-P H-453516JDA-P H-354520JDA-P H-453520JDA-P H-405020JDA-P H-504020JDA-P H-406023JDA-P H-604023
JDA-C H-222712JDA-C H-272212JDA-C H-203015JDA-C H-302015JDA-C H-203018JDA-C H-302018JDA-C H-253515JDA-C H-352515JDA-C H-304015JDA-C H-403015JDA-C H-304018JDA-C H-403018JDA-C H-354516JDA-C H-453516JDA-C H-354520JDA-C H-453520JDA-C H-405020JDA-C H-504020JDA-C H-406023JDA-C H-604023
Steel mounting plate(Zinc plating)
Plastic mounting plate(ABS)
Key ring(K40)
Locker(SK)
Plastic locker(PK)
Wall mounting bracket(B40, B50, B60)
Draw Latch(H65, M75)
Hinge(H65, H75)
Vent(V60, V80)
Plastic bracket(PB20, 25)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
H Series - Medium size
The dimension of mounting plate is based on the plastic mounting plateand the dimension of around bracket is steel mounting plate.
DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size190190280190280190380190380280280340280380280380280560330430380560
170170266170266170359170359265259319266359266359266535310410366535
165165255165255165355165355365
254.7315255355255355255505266386355505
120120210120210120310120310210210270210310210310210490250350310490
190280190280190380190380190280340280380280380280560280430330560360
170266170266170359170360170210319259359260359266535266410310535366
165255165255165355165355165255315
254.7315255355255505255386266505355
120210120210210310120310120210270210310210310210490210350250490310
989898
1501509898
15015098
1001009898
148148100100150150150150
30303030303030303030303030303030303030303030
112112112159159109109159159112111111111111
161.5161.5120120160160160160
190×190×130190×280×130280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180
Dimension ( allowable error± 1mm)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Product Characteristics
Accessories
1. It will not be damaged even using for a long time because stainless steel hinge and draw latch are equipped.
2. It has excellent airghtness as it was designed considering bolt open/close type. hinge made of stainless steel and equipment of draw latch.
3. User make hole on the place of equipment simply.
Model and sizeModel and size(cover included) Product model Plate Model Plate Size
Width×Length×Height
(mm)
Width×Length×Height(inch)
SteeImounting
plate 1.6mm
Plasticmounting
plate 3-4.5mm
ABS PC/ABS PCM1 M2-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT1919S1928S2819S1928S2819S1938S3819S1938S3819S2828S2834S3428S2838S3828S2838S3828S2856S5628S3343S4333S3856S5638S
159159159159159159159159159248248308248248248348
(230)(232)(295)(295)(345)(345)
159248248248248348348348348248308248348348348348
(535)(535)(395)(395)(535)(535)
1919P1928P2819P1928P2819P1938P3819P1938P3819P2828P2834P3428P2838P3828P2838P3828P
3343 P4333 P
560×280×130, 580×380×180 is for non water proof product.
Steel mounting plate(Zinc plating)
Plastic mounting plate(ABS)
Key ring(K40)
Locker(SK)
Plastic locker(PK)
Wall mounting bracket(B50)
Draw Latch(H65)
Hinge(H65)
Vent(V60, V80)
Stopper (M22)
Plastic bracket(PB25)
190×190×130190×280×130280×190×130190×280×180280×190×180190×380×130380×190×130190×380×180380×190×180280×280×130280×340×130340×280×130280×380×130380×280×130280×380×180380×280×180280×560×130560×280×130330×430×180430×330×180380×560×180560×380×180
7.48× 7.48×5.12 7. 48×11.02×5.1211.02× 7.48×5.12 7.48×11.02×7.0911.02× 7.48×7.09 7.48×14.96×5.1214.96× 7.48×5.12 7.48×14.96×7.0914.96× 7.48×7.0911.02×11.02×5.1211.02×13.39×5.1213.39×11.02×5.1211.02×14.96×5.1214.96×11.02×5.1211.02×14.96×7.0914.96×11.02×7.0911.02×22.05×5.1222.05×11.02×5.1212.99×16.93×7.0916.93×12.99×7.0914.96×22.05×7.0922.05×14.96×7.09
JDA-A H-191913JDA-A H-192813JDA-A H-281913JDA-A H-192818JDA-A H-281918JDA-A H-193813JDA-A H-381913JDA-A H-193818JDA-A H-381918JDA-A H-282813JDA-A H-283413JDA-A H-342813JDA-A H-283813JDA-A H-382813JDA-A H-283818JDA-A H-382818JDA-A H-285613JDA-A H-562813JDA-A H-334318JDA-A H-433318JDA-A H-385618JDA-A H-563818
JDA-P H-191913JDA-P H-192813JDA-P H-281913JDA-P H-192818JDA-P H-281918JDA-P H-193813JDA-P H-381913JDA-P H-193818JDA-P H-381918JDA-P H-282813JDA-P H-283413JDA-P H-342813JDA-P H-283813JDA-P H-382813JDA-P H-283818JDA-P H-382818JDA-P H-285613JDA-P H-562813JDA-P H-334318JDA-P H-433318JDA-P H-385618JDA-P H-563818
JDA-C H-191913JDA-C H-192813JDA-C H-281913JDA-C H-192818JDA-C H-281918JDA-C H-193813JDA-C H-381913JDA-C H-193818JDA-C H-381918JDA-C H-282813JDA-C H-283413JDA-C H-342813JDA-C H-283813JDA-C H-382813JDA-C H-283818JDA-C H-382818JDA-C H-285613JDA-C H-562813JDA-C H-334318JDA-C H-433318JDA-C H-385618JDA-C H-563818
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
H Series - Small size
Dimension ( allowable error± 1mm)The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel mounting plate.
Division W1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size 80×110× 70110× 80× 70 80×110× 85110× 80× 85 80×130× 70130× 80× 70 80×130× 85130× 80× 85 80×180× 70180× 80× 70 80×180× 85180× 80× 85 80×250× 70250× 80× 70 80×250× 85250× 80× 85100×100× 75100×100×100125×125× 75125×125×100125×175× 75175×125× 75125×175×100175×125×100140×170× 95170×140× 95140×230× 95230×140× 95150×150× 75150×150×100150×200× 75200×150× 75150×200×100200×150×100150×200×130200×150×130150×200×160200×150×160150×250×100250×150×100150×250×130250×150×130200×200×100200×200×130200×200×160
8011080110801308013080180801808025080250100100125125127175127175143173140230150150150200150200150200150200150250150250200200200
74104741047412474124741747417474244742449494119119121169121169137167134224144144142192142192142192142192142242142242193193193
629262926211262112621626216262232622328282105105109157109157122152122212110110132182132182132182132182132232132232132132132
0800
800
1000
1000
1500
1500
2200
22000000
1400
1400
1300
190000
1600
1600
1600
1600
2100
210000
1108011080
13080
13080
18080
18080
25080
25080
100100125125175127175127173143230140150150200150200150200150200150250150250150200200200
10474
10474
12474
12474
17474
17474
24474
244749494119119169121169121167137224134144144192142192142192142192142242142242142193193193
92629262
11262
11262
16262
16262
23262
232628282
105105157109157109152122212122132132182132182132182132182132232132232132182182182
800
800
1000
1000
1500
1500
2200
2200
60607070
1400
1400
1300
1900
110110160
0160
0160
0160
0210
0210
0120120120
50505050505050505050505050505050558055805050505075757575558055558080
1101101101108080808080
110110
202035352020353520203535202035352020202025255050202020252020202020202020505020205050202050
53536868535368685353686852526767588358835858838377777777588358588383111111149149838311311382111141
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
1.It will not be damaged even uaing for a long time because stainless steel hinge and draw latch are equipped. 2.Ring is equipped at correct place after processing so that it has perfect airtight and convenience to open and close. 3.We reinforce the thickness and structure to be used longer time.
Product Characteristics
Accessories
Model and size(cover included) Product model Plate Model Plate SizeWidth×Length
×Height(mm)
Width×Length×Height(inch)
SteeImounting
plate 1.6mm
Plasticmounting
plate 3-4.5mm
ABS PC/ABS PCM1 M2-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT
Steel mounting plate(Zinc plating)
Plastic mounting plate(ABS)
Key ring(K40)
Locker(SK)
Plastic locker(PK)
Draw latch(M55)
Hinge(H55)
Stopper(M11)
Vent(V60, V80)
Vent(V60, V80)
Plastic bracket(PB20, 25)
80 × 110 × 70110 × 80 × 70 80 × 110 × 85110 × 80 × 85 80 × 130 × 70130 × 80 × 70 80 × 130 × 85130 × 80 × 85 80 × 180 × 70180 × 80 × 70 80 × 180 × 85180 × 80 × 85 80 × 250 × 70250 × 80 × 70 80 × 250 × 85250 × 80 × 85100 × 100 × 75100 × 100 × 100125 × 125 × 75125 × 125 × 100125 × 175 × 75175 × 125 × 75125 × 175 × 100175 × 125 × 100140 × 170 × 95170 × 140 × 95140 × 230 × 95230 × 140 × 95150 × 150 × 75150 × 150 × 100150 × 200 × 75200 × 150 × 75150 × 200 × 100200 × 150 × 100150 × 200 × 130200 × 150 × 130150 × 200 × 160200 × 150 × 160150 × 250 × 100250 × 150 × 100150 × 250 × 130250 × 150 × 130200 × 200 × 100200 × 200 × 130200 × 200 × 160
0811 S1108 S0811 S1108 S0813 S1308 S0813 S1308 S0818 S1808 S0818 S1808 S0825 S2508 S0825 S2508 S1010 S1010 S1212 S1212 S1217 S1712 S1217 S1712 S1417 S1714 S1423 S2314 S1515 S1515 S1520 S2015 S1520 S2015 S1520 S2015 S2020 S2020 S1525 S2515 S1525 S2515 S2020 S2020 S2020 S
0811 P1108 P0811 P1108 P0813 P1308 P0813 P1308 P0818 P1808 P0818 P1808 P0825 P2508 P0825 P2508 P1010 P1010 P1212 P1212 P1217 P1712 P1217 P1712 P1417 P1714 P1423 P2314 P1515 P1515 P1520 P2015 P1520 P2015 P1520 P2015 P2020 P2020 P1525 P2515 P1525 P2515 P2020 P2020 P2020 P
646464646565656565656565656565658282107107113113113113126126122122123123129129129129129129129129129129129129179179179
949494941151151151151651651651652352352352358282107107161161161161155155212212123123179179179179179179179179224224224224179179179
3.15 × 4.33 × 2.764.33 × 3.15 × 2.763.15 × 4.33 × 3.354.33 × 3.15 × 3.353.15 × 5.12 × 2.765.12 × 3.15 × 2.763.15 × 5.12 × 3.355.12 × 3.15 × 3.353.15 × 7.09 × 2.767.09 × 3.15 × 2.763.15 × 7.09 × 3.357.09 × 3.15 × 3.353.15 × 9.84 × 2.769.84 × 3.15 × 2.763.15 × 9.84 × 3.359.84 × 3.15 × 3.353.94 × 3.94 × 2.953.94 × 3.94 × 3.944.92 × 4.92 × 2.954.92 × 4.92 × 3.944.92 × 6.89 × 2.956.89 × 4.92 × 2.954.92 × 6.89 × 3.946.89 × 4.92 × 3.945.51 × 6.69 × 3.746.69 × 5.51 × 3.745.51 × 9.06 × 3.749.06 × 5.51 × 3.745.91 × 5.91 × 2.955.91 × 5.91 × 3.945.91 × 7.87 × 2.957.87 × 5.91 × 2.955.91 × 7.87 × 3.947.87 × 5.91 × 3.945.91 × 7.87 × 5.127.87 × 5.91 × 5.125.91 × 7.87 × 6.307.87 × 5.91 × 6.305.91 × 9.84 × 3.949.84 × 5.91 × 3.945.91 × 9.84 × 5.129.84 × 5.91 × 5.127.87 × 7.87 × 3.947.87 × 7.87 × 5.127,87 × 7.87 × 6.30
JDA-A H-081107JDA-A H-110807JDA-A H-081108JDA-A H-110808JDA-A H-081307JDA-A H-130807JDA-A H-081308JDA-A H-130808JDA-A H-081807JDA-A H-180807JDA-A H-081808JDA-A H-180808JDA-A H-082507JDA-A H-250807JDA-A H-082508JDA-A H-250808JDA-A H-101007JDA-A H-101010JDA-A H-121207JDA-A H-121210JDA-A H-121707JDA-A H-171207JDA-A H-121710JDA-A H-171210JDA-A H-141709JDA-A H-171409JDA-A H-142309JDA-A H-231409JDA-A H-151507JDA-A H-151510JDA-A H-152007JDA-A H-201507JDA-A H-152010JDA-A H-201510JDA-A H-152013JDA-A H-201513JDA-A H-152016JDA-A H-201516JDA-A H-152510JDA-A H-251510JDA-A H-152513JDA-A H-251513JDA-A H-202010JDA-A H-202013JDA-A H-202016
JDA-P H-081107JDA-P H-110807JDA-P H-081108JDA-P H-110808JDA-P H-081307JDA-P H-130807JDA-P H-081308JDA-P H-130808JDA-P H-081807JDA-P H-180807JDA-P H-081808JDA-P H-180808JDA-P H-082507JDA-P H-250807JDA-P H-082508JDA-P H-250808JDA-P H-101007JDA-P H-101010JDA-P H-121207JDA-P H-121210JDA-P H-121707JDA-P H-171207JDA-P H-121710JDA-P H-171210JDA-P H-141709JDA-P H-171409JDA-P H-142309JDA-P H-231409JDA-P H-151507JDA-P H-151510JDA-P H-152007JDA-P H-201507JDA-P H-152010JDA-P H-201510JDA-P H-152013JDA-P H-201513JDA-P H-152016JDA-P H-201516JDA-P H-152510JDA-P H-251510JDA-P H-152513JDA-P H-251513JDA-P H-202010JDA-P H-202013JDA-P H-202016
JDA-C H-081107JDA-C H-110807JDA-C H-081108JDA-C H-110808JDA-C H-081307JDA-C H-130807JDA-C H-081308JDA-C H-130808JDA-C H-081807JDA-C H-180807JDA-C H-081808JDA-C H-180808JDA-C H-082507JDA-C H-250807JDA-C H-082508JDA-C H-250808JDA-C H-101007JDA-C H-101010JDA-C H-121207JDA-C H-121210JDA-C H-121707JDA-C H-171207JDA-C H-121710JDA-C H-171210JDA-C H-141709JDA-C H-171409JDA-C H-142309JDA-C H-231409JDA-C H-151507JDA-C H-151510JDA-C H-152007JDA-C H-201507JDA-C H-152010JDA-C H-201510JDA-C H-152013JDA-C H-201513JDA-C H-152016JDA-C H-201516JDA-C H-152510JDA-C H-251510JDA-C H-152513JDA-C H-251513JDA-C H-202010JDA-C H-202013JDA-C H-202016
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
S Series - Medium size
Dimension ( allowable error± 1mm)The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel mounting plate.
DivisionW1 W2 W3 W4 H1 H2 H3 H4 D1 D2 D3Size
190×190×130190×280×130190×280×180190×380×130190×380×180280×280×130280×340×130280×380×130280×380×180280×560×130330×430×180380×560×180
190190190190190280280280280280330380
170170170170170266259266266296
366
165165165165165255
254.7255255255
355
120120120120120210210210210210
310
190280280380380280340380380560430560
170266266359360266319359359535
535
165255255355355255315355355505
505
120210210310310210270310310490
490
9898
15098
15098
10098
150100150150
30303030303030303030
30
112112159109159112111111
161.5120
160
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
1.Screw thread for connecting cover bolt of the base is inserted into the base in injection molding so that it has sufficient strength and not broken when tightening bolt.
2.1t is designed as 4 side sliding type to be strong against impact.
Product Characteristics
Accessories
Model and size(cover included) Product model Plate Model Plate SizeWidth×Length
×Height(mm)
Width×Length×Height(inch)
SteeImounting
plate 1.6mm
Plasticmounting
plate 3-4.5mm
ABS PC/ABS PCM1 M2-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT-Grey Cover G
-Transparent CoverT
Steel mounting plate(Zinc plating)
Plastic mounting plate(ABS)
Cover bolt(standardProvide)(CB28-)
Cover bolt(optional) (CB28+)
Wall mounting bracket(B50)
Vent(V60, V80)
Plastic bracket(PB25)
190×190×130
190×280×130
190×280×180
190×380×130
190×380×180
280×280×130
280×340×130
280×380×130
280×380×180
280×560×130
330×430×180
380×560×180
1919 S
1928 S
1928 S
1938 S
1938 S
2828 S
2834 S
2838 S
2838 S
2856 S
3343 S
3856 S
159
159
159
159
159
248
248
248
248
(232)
(295)
(345)
159
248
248
348
348
248
308
348
348
(535)
(395)
(535)
1919 P
1928 P
1928 P
1938 P
1938 P
2828 P
2834 P
2838 P
2838 P
3343 P
7.48× 7.48×5.12
7.48×11.02×5.12
7.48×11.02×7.09
7.48×14.96×5.12
7.48×14.96×7.09
11.02×11.02×5.12
11.02×13.39×5.12
11.02×14.96×5.12
11.02×14.96×7.09
11.02×22.05×5.12
12.99×16.93×7.09
14.96×22.05×7.09
JDA-A S-191913
JDA-A S-192813
JDA-A S-192818
JDA-A S-193813
JDA-A S-193818
JDA-A S-282813
JDA-A S-283413
JDA-A S-283813
JDA-A S-283818
JDA-A S-285613
JDA-A S-334318
JDA-A S-385618
JDA-P S-191913
JDA-P S-192813
JDA-P S-192818
JDA-P S-193813
JDA-P S-193818
JDA-P S-282813
JDA-P S-283413
JDA-P S-283813
JDA-P S-283818
JDA-P S-285613
JDA-P S-334318
JDA-P S-385618
JDA-C S-191913
JDA-C S-192813
JDA-C S-192818
JDA-C S-193813
JDA-C S-193818
JDA-C S-282813
JDA-C S-283413
JDA-C S-283813
JDA-C S-283818
JDA-C S-285613
JDA-C S-334318
JDA-C S-385618
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
S Series - Small size
Dimension ( allowable error± 1mm) The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.
DivisionW1 W2 W3 H1 H2 H3 H4 D1 D2 D3
Size 50× 65× 45 50× 65× 55 65× 95× 55 75×105× 55 80× 80× 60 80×110× 45 80×110× 70 80×110× 85 80×130× 70 80×130× 85 80×160× 55 80×160× 85 80×180× 70 80×180× 85 80×250× 70 80×250× 85100×100× 75100×100×100100×185× 70100×200× 70100×230× 70125×125× 75125×125×100125×175× 75125×175×100140×170× 95140×230× 95150×150× 75150×150×100150×200× 75150×200×100150×200×130150×200×160150×250×100150×250×130160×160× 70200×200×100200×200×130200×200×160
50506575808080808080828280808080
100100100100100125125125125140140150150150150150150150150160200200200
444459697474747474747676747474749494949494
119119121121137134144144142142142142142142154193193193
373747576262626262626868626262628282828282
105105109109122122110110132132132132132132110182132132
656595
10580
110110110130130162162180180250250100100185200230125125175175173230150150200200200200250250160200200200
5959899994
104104104124124156156174174244244
9494
179194224119119169169167224144144192192192192242242154193193193
5252778762929292
112112148148162162232232
8282
167182212105105157157152212132132182182182182232232142182182182
4040657550808080
100100137137150150220220
6060
139158184
7070
140140130190110110160160160160210210110120120120
30404040452550505050407050505050558055555555805050757555805580
11011080805580
110110
151515151520203520351515203520352020151515202025502020202020202050205015202050
29.539.539.539.5432853685368386853685267588353535358835883777758835883111149831135382111141
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
▪Product Characteristics 1.Screw thread connecting cover bolt of the base in inserted into the base in injection molding so that it has
sufficient strength and not broken when tightening bolt.
2.lt can be used semi-permanently as we reinforced thickness
Modeland size(cover i ncluded) productmodel plate Model plate SizeABS PC/ABS PC Steel Plastic
mounting M1 M2 plate3-4.5mm1.6mm
50x 65x 45 1.97x2.56x1.77 JDA-A�S-050604 JDA-P�S-050604 JDA-C�S-050604 0506 S (52) (38) 50x 65x 55 1.97x2.56x2.17 JDA-A�S-050605 JDA-P�S-050605 JDA-C�S-050605 0506 S (52) (38)
(80) 65x 95x 55 2.56x3.74x2.17 JDA-A�S-060905 JDA-P�S-060905 JDA-C�S-060905 0609 S (50) 75x105x 55 2.95x4.13x2.17 JDA-A�S-071005 JDA-P�S-071005 JDA-C�S-071005 0710 S (60) (90) 80x 80x 60 3.15x3.15x2.36 JDA-A�S-080806 JDA-P�S-080806 JDA-C�S-080806 0808 S (65) (65) 80x110x 45 3.15x4.33x1.77 JDA-A�S-081104 JDA-P�S-081104
JDA-P�S-081107JDA-C�S-081104 0811 S 0811 P 65 95
80x110x 70 3.15x4.33x2.76 JDA-A�S-081107 JDA-C�S-081107 0811 S 0811 P 65 95 80x110x 85 3.15x4.33x3.35 JDA-A�S-081108 JDA-P�S-081108 JDA-C�S-081108 0811 S 0811 P 65 95 80x130x 70 3.15x5.12x2.76 JDA-A�S-081307 JDA-P�S-081307 JDA-C�S-081307 0813 S 0813 P 65 115 80x130x 85 3.15x5.12x3.35 JDA-A�S-081308 JDA-P�S-081308 JDA-C�S-081308 0813 S 0813 P 65 115 80x160x 55 3.15x6.30x2.17 JDA-A�S-081605 JDA-P�S-081605 JDA-C�S-081605 0816 S 0816 P 65 152 80x160x 85 3.15x6.30x3.35 JDA-A�S-081608 JDA-P�S-081608 JDA-C�S-081608 0816 S 0816 P 65 152 80x180x 70 3.15x7.09x2.76 JDA-A�S-081807 JDA-P�S-081807 JDA-C�S-081807 0818 S 0818 P 65 165 80x180x 85 3.15x7.09x3.35 JDA-A�S-081808 JDA-P�S-081808 JDA-C�S-081808 0818 S 0818 P 65 165 80x250x 70 3.15x9.84x2.76 JDA-A�S-082507 JDA-P�S-082507 JDA-C�S-082507 0825 S 0825 P 65 235 80x250x 85 3.15x9.84x3.35 JDA-A�S-082508 JDA-P�S-082508 JDA-C�S-082508 0825 S 0825 P 65 235 100x100x 75 3.94x3.94x2.95 JDA-A�S-101007 JDA-P�S-101007 JDA-C�S-101007 1010 S 1010 P 88 89 100x100x100 3.94x3.94x3.94 JDA-A�S-101010 JDA-P�S-101010 JDA-C�S-101010 1010 S 1010 P 88 89 100x185x 70 3.94x7.28x2.76 JDA-A�S-101807 JDA-C�S-101807 1018 S 1018 P (88) (174)100x200x 70 3.94x7.87x2.76 JDA-A�S-102007 JDA-P�S-102007 JDA-C�S-102007 1020 S (88) (189)100x230x 70 3.94x9.06x2.76 JDA-A�S-102307 JDA-C�S-102307 1023 S (88) (219)125x125x 75 4.92x4.92x2.95 JDA-A�S-121207 JDA-P�S-121207 JDA-C�S-121207 1212 S 1212 P 101 102125x125x100 4.95x4.92x3.94 JDA-A�S-121210 JDA-P�S-121210 JDA-C�S-121210 1212 S 1212 P 101 102125x175x 75 4.92x6.89x2.95 JDA-A�S-121707 JDA-P�S-121707 JDA-C�S-121707 1217 S 1217 P 101 156125x175x100 4.92x6.89x3.94 JDA-A�S-121710 JDA-P�S-121710 JDA-C�S-121710 1217 S 1217 P 101 156140x170x 95 5.51x6.69x3.74 JDA-A�S-141709 JDA-P�S-141709 JDA-C�S-141709 1417 S 1417 P 122 154140x230x 95 5.51x9.06x3.74 JDA-A�S-142309 JDA-P�S-142309 JDA-C�S-142309 1423 S 1423 P 122 211150x150x 75 5.91x5.91x2.95 JDA-A�S-151507 JDA-P�S-151507 JDA-C�S-151507 1515 S 1515 P 134 134 150x150x100 5.91x5.91x3.94 JDA-A�S-151510 JDA-P�S-151510 JDA-C�S-151510 1515 S 1515 P 134 134 150x200x 75 5.91x7.87x2.95 JDA-A�S-152007 JDA-P�S-152007 JDA-C�S-152007 1520 S 1520 P 136 186 150x200x100 5.91x7.87x3.94 JDA-A�S-152010 JDA-C�S-152010 1520 S 1520 P 136 186 150x200x130 5.91x7.87x5.12 JDA-A�S-152013 JDA-P�S-152013 JDA-C�S-152013 1520 S 1520 P 129 179 150x200x160 5.91x7.87x6.30 JDA-A�S-152016 JDA-P�S-152016 JDA-C�S-152016 2020 S 2020 P 129 179 150x250x100 5.91x9.84x3.94 JDA-A�S-152510 JDA-P�S-152510 JDA-C�S-152510 1525 S 1525 P 136 235 150x250x130 5.91x9.84x5.12 JDA-A�S-152513 JDA-P�S-152513
JDA-P�S-161607 JDA-C�S-152513 1525 S 1525 P 136 235
160x160x 70 6.30x6.30x2.76 JDA-A�S-161607 JDA-C�S-161607 1616 S 134 134 200x200x100 7.87x7.87x3.94 JDA-A�S-202010 JDA-P�S-202010 JDA-C�S-202010 2020 S 2020 P 187200x200x130 7.87x7.87x5.12 JDA-A�S-202013 JDA-P�S-202013 JDA-C�S-202013 2020 S 2020 P 187200x200x160 7.87x7.87x6.30 JDA-A�S-202016 JDA-P�S-202076 JDA-C�S-202016 2020 S 2020 P 187
Steel mounting plate Plastic mounting plate Cover bolt (optiomal) Cover bolt (standard Cover bolt (standard Cover bolt (standard Wall mounting plastic bracke(PB25,20)(Zinc plating) (ABS) (CB20-) provide)(CB20) provide)(CB35) provide)(CB50) bracket (04B)
Modeland size
Accessories
JDA-P�S-101807
JDA-P�S-102307
JDA-P�S-152010
-Grey Cover -Transparent Cover
-Grey Cover -Transparent Cover
-Grey Cover -Transparent Cover
mountingplate
187187187
Width×length Width×length ×Height ×Height
(mm) (inch)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
M Series
Dimension ( allowable error± 1mm) The dimension of mounting plate is based on the plastic mounting plate and the dimension of around bracket is steel's mounting plate.
DivisionW1 W2 W3 H1 H2 H3 D1 D2 D3
Size
80×130× 35 80×130× 60 80×130× 75 80×130× 85 80×130×100 80×130×125130×130× 35130×130× 60130×180× 35130×180× 60150×180× 60180×180× 60180×180× 75180×180×100180×180×125180×255× 75180×255×100180×255×125
808080808080130130130130150180180180180180180180
6262626262112112112112132162162162162162162162162
40404040404090909090
110.5140140140140140140140
130130130130130130130130180180180180180180180255255255
112112112112112112112112162162162162162162162237237237
9090909090909090140140140140140140140
201.5201.5201.5
25506550909025502550505065901156085110
101010351035101010101010101010151515
21.546.561.571.587.5111.521.546.521.546.545.545.559.584.5109.559.584.5109.5
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
▪ ProductCharacteristics1.Considering attachment of membrane keyboard,this M type Box is designed to make center surface of the cover
slightlylower.
2.Screw thread for connceting cover bolt of the base is inserted into the base in injection molding so that it has sufficient strength and not broken when tightening bolt.
3.Cover is low and base is high so that it has refined and stable appearance
Steel mounting(Zinplating)
Cover bolt(standardprovide)(CB10)
Cover boll(optiomal)(CB20-)
Coverbolt(standardprovide)(CB20)
Wallmountingbracket(840)
plastic bracket(PB20)
Accessories
Modeland size(covermcluded) product model plate Model plate SizeWidth×Length
×Height (mm)
Width×Length×Height(inch)
ABS PC/ABS PC SteeImounting
plate1.6mm
Plasticmounting
plate3~4.5mm
M1 M2
Modeland size
-Grey Cover -Transparent Cover
-Grey Cover -Transparent Cover
-Grey Cover -Transparent Cover
80×130× 35 3. 15× 5.12×1.38 JDA-A�M-081303 JDA-P�M-081303 JDA-C�M-081303 0813 S 0813 P (49) (98) 80×130× 60 3. 15× 5.12×2.36 JDA A�M-081306 JDA-P�M-081306 JDA-C�M-081306 0813 S 0813 P (49) (98) 80×130× 75 3. 15× 5.12×2.95 JDA-A�M-081307 JDA-P�M-081307 JDA-C�M-081307 0813 S 0813 P (49) (98) 80×130× 85 3. 15× 5.12×3.35 JDA-A�M-081308 JDA-P�M-081308 JDA-C�M-081308 0813 S 0813 P (49) (98) 80×130×100 3. 15× 5.12×3.94 JDA-A�M-081310 JDA-P�M-081310 JDA-C�M-081310 0813 S 0813 P (49) (98) 80×130×125 3. 15× 5.12×4.92 JDA-A�M-081312 JDA-P�M-081312 JDA-C�M-081312 0813 S 0813 P (49) (98)
130×130× 35 5. 12× 5.12×1.38 JDA-A�M-131303 JDA-P�M-131303 JDA-C�M-131303 1313 S 1313 P (98) (98) 130×130× 60 5. 12× 5.12×2.36 JDA A�M-131306 JDA-P�M-131306 JDA-C�M-131306 1313 S 1313 P (98) (98) 130×180× 35 5. 12× 7.09×1.38 JDA-A�M-131803 JDA-P�M-131803 JDA-C�M-131803 1318 S 1318 P 113 161 130×180× 60 5. 12× 7.09×2.36 JDA-A�M-131806 JDA-P�M-131806 JDA-C�M-131806 1318 S 1318 P 113 161 150×180× 60 5. 91× 7.09×2.36 JDA-C�M-151806 1518 S (123) (161) 180×180× 60 7. 09× 7.09×2.36 JDA-A�M-181806 JDA-P�M-181806 JDA-C�M-181806 1818 S 1818 P (148) 180×180× 75 7. 09× 7.09×2.95 JDA-A�M-181807 JDA-P�M-181807 JDA-C�M-181807 1818 S 1818 P (148) (148)180× 180× 100 7. 09× 7.09×3.94 JDA-A�M-181810 JDA-P�M-181810 JDA-C�M-181810 1818 S 1818 P (148) (148)
(148)180×180×125 7. 09× 7.09×4.92 JDA-A�M-181812 JDA-P�M-181812 JDA-C�M-181812 1818 S 1818 P (148)180×255× 75 7. 09×10.04×2.95 JDA-A�M-182507 JDA-P�M-182507 JDA-C�M-182507 1825 S (148) (223) 180×255×100 7. 09×10.04×3.94 JDA-A�M-182510 JDA-P�M-182510 JDA-C�M-182510 1825 S (148) (223) 180×255×125 7. 09×10.04×4.92 JDA-A�M-182512 JDA-P�M-182512 JDA-C�M-182512 1825 S (148) (223)
JDA-P�M-151806JDA-A�M-151806(148)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
Aluminium Die Casting box
Dimension ( allowable error± 1mm)
DivisionW1 W2 W3 H1 H2 H3 D1 D2Size
64× 98×3480× 75×5780×125×5780×175×5780×250×57100×100×80100×160×80120×122×80120×220×80120×220×90150×132×90160×160×90160×260×90180×180×100230×200×110313×404×111313×404×181
6880808080100100120120120150160160180230313313
57.8727272729292111111111121151151171230303303
3652525252666682828292110110130140262262
9875125175250100160122122220132160260180200404404
91.86711716724292152113113211144151251171193394394
866311316323886146106106204138140240160150382382
25424242426161616161707171719191161
915151515202020203020202030202020
Width×Length×Height(mm)
Width×Length×Height(inch) Aluminium Box
steelmounting
plasticmounting
plate 64× 98× 34 80× 75× 57 80×125× 57 80×175× 57 80×250× 57100×100× 80100×160× 80120×122× 80120×220× 80120×220× 90150×132× 90160×160× 90160×260× 90180×180×100230×200×100313×404×111313×404×181
2.52× 3.86×1.34 3.15× 2.95×2.24 3.15× 5.00×2.24 3.15× 6.89×2.24 3.15× 9.84×2.24 3.94× 3.94×3.15 3.94× 7.87×3.15 4.72× 4.80×3.15 4.72× 8.66×3.15 4.72× 8.66×3.54 5.90× 5.19×3.54 6.30× 6.30×3.54 6.30×10.24×3.54 7.09× 7.09×3.94 9.06× 7.87×4.3312.32× 15.9×4.3713.32× 15.9×7.12
JDA-AL-061003JDA-AL-080806JDA-AL-081306JDA-AL-081806JDA-AL-082506JDA-AL-101008JDA-AL-101608JDA-AL-121208JDA-AL-122208JDA-AL-122209JDA-AL-151309JDA-AL-161609JDA-AL-162609JDA-AL-181810JDA-AL-232011JDA-AL-314011JDA-AL-314018
6010A0808A0813A0818A0825A1010A1016A1212A1222A1222A1513A1616A1626A1818A2320A3140A3140A
1626AP
2320AP
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Assembly of dual door kits
Product Characteristics
Model and size
Dual door enclosure
1.Dual door is easy to open or close as it will be assembled with handle and hinge type. 2.it is very strong as it is fixed with 4 supports and it has good external appearance
swing frame applicable modelSize
Model ModelDual door
(frame,support,hinge,handle.included)Width×Length×Height
(mm)
SizeWidth×Length×Height
(mm)
Dual doormounting plate
(Aluminium)
Dual door(frame,support,hinge,
handle.included)
Dual doormounting plate
(Aluminium)
Product model swing frame applicable model Product model
200×300×130
200×300×150
200×300×180
250×350×150
250×350×180
280×280×130
280×380×130
300×300×150
300×300×180
300×400×150
JDA-F203013
JDA-F203015
JDA-F203018
JDA-F253515
JDA-F253518
JDA-F282813
JDA-F283813
JDA-F303015
JDA-F303018
JDA-F304015
JDA- P-203013
JDA- P-203015
JDA- P-203018
JDA- P-253515
JDA- P-253518
JDA- P-282813
JDA- P-283813
JDA- P-303015
JDA- P-303018
JDA- P-304015
JDA-FA2030
JDA-FA2030
JDA-FA2030
JDA-FA2535
JDA-FA2535
JDA-FA2828
JDA-FA2828
JDA-FA3030
JDA-FA3030
JDA-FA3040
300×400×180350×450×160350×450×200400×500×160400×500×200400×500×200400×600×180400×600×230400×600×230530×630×185530×630×255
JDA-F-304018JDA-F-354516JDA-F-354520JDA-F-405016JDA-F-405020JDA-F-405020JDA-F-406018JDA-F-406023JDA-F-406023JDA-F-506018JDA-F-506025
JDA-FA3040JDA-FA3545JDA-FA3545JDA-FA4050JDA-FA4050JDA-FA4050JDA-FA4060JDA-FA4060JDA-FA4060JDA-FA5060JDA-FA5060
JDA- P-304018JDA- P-354516JDA- P-354520JDA- P-405016JDA- H-405020JDA- P-405020JDA- H-406018JDA- P-406023JDA- H-406023JDA- P-506018JDA- P-506025
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
1. It is designed to prevent the penetration of rain or dust perfectly double as roof is protruded from top and bottom of the base.
2. It is easy to separate cover and base so that user can attach of detach them for processing and printing.
3. It is possible to reduce Product price and assembly cost from integrated cover and transparent window.
4. Insert hinge into the product and hinge connecting pin and important parts of draw latch aremade of stainless steel so
that it is very strong and corrosion resistant.
All-in-one Dual door Enclosure
Dimension ( allowable error± 1mm) Product Characteristics
Model and sizeModeland size(cover i ncluded) productmodel
ABS PC/ABS PC Model No.
mounting plate Dual Model
Size(mm) Model No Size(mm)Width×Length×Height (mm)
Width×length×Height (inch)
250×350×160
250×350×190
350×450×130
350×450×170
350×450×210
9.84×13. 77×6.29
9.84×13. 77×7.48
13.77×17.11×5.11
13.77×17.71×6.69
13.77×17.71×8.26
JDA-AGD-253516
JDA-AGD-253519
JDA-AGD-354513
JDA-AGD-354517
JDA-AGD-354521
JDA-PGD-253516
JDA-PGD-253519
JDA-PGD-354513
JDA-PGD-354517
JDA-PGD-354521
JDA-CGD-253516
JDA-CGD-253519
JDA-CGD-354513
JDA-CGD-354517
JDA-CGD-354521
2535 P
2535 P
3545 P
3545 P
3545 P
2535S
2535S
3545S
3545S
3545S
D 2535
D 2535
D 3545
D 3545
D 3545
216×316
216×316
306×407
306×407
306×407
220×220
220×220
314×313
314×313
314×313
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
1.Built-in guide slot for inserting PCB
2.0ptional extension to length of the profile.
3.Aluminium SBGL is suitable for highly corrosive enviroment (Custom)
4.Optional EMC-version for Electromagnetic shielding (Custom)
JDA aluminium housing for inserting card
Dimension ( allowable error± 1mm) Product Characteristics
Model and sizeproduct model Model and size(cover included)
Aluminium Width×Length×Height (mm)
Width×length×Height (inch)
JDA-ALC-111609
JDA-ALC-172011
111.5 × 166 × 91.5
173 × 206 × 113
4.39 × 6.53 × 3.6
6.81 × 8.11 × 4.44
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
3~5.58~4.56~10
7~12.58.5~1412.5~18
12~12.815.2~15.518.6~18.920.4~20.722.5~22.828.3~28.7
12.515.218.620.422.528.3
JDA-G-PG 7JDA-G-PG 9JDA-G-PG 11JDA-G-PG 13.5JDA-G-PG 16JDA-G-PG 21
Material:Nylon plastic Hermetic seal:Nitrile rubberIP rating:IP66Ambient tempersture:-20°C~65°CSupply color:Grey
Cable Glands - PG Series
JDA-PG-L LONG GABLE GLAND
JDA-BP-PG BEND PROOF CABLE GLAND
Model and size
Model and size
Model and size
Product Characteristics
Product Characteristics
JDA-PG CABLE GLAND
Node No.Gray Dark Gray Cabe ΦmmBack
Size B(mm)A(mm)
Node No.
Artice No. Cabe Range(mm)
Panel MountinhHole
Gray Cabe ΦmmSize
B(mm)A(mm)
A(mm)
JDA-PG 7 -GJDA-PG 9 -GJDA-PG 11 -GJDA-PG 13. 5-GJDA-PG 16 -GJDA-PG 19 -GJDA-PG 21 -GJDA-PG 25 -GJDA-PG 29 -GJDA-PG 36 -GJDA-PG 42 -GJDA-PG 48 -GJDA-PG 63 -G
JDA-PG 7L -GJDA-PG 9L -GJDA-PG 11L -GJDA-PG 13.5L -GJDA-PG 16L -G
3.5~64~85~106~1210~14
1515151515
1216182022
JDA-PG 7 -DJDA-PG 9 -DJDA-PG 11 -DJDA-PG 13.5-DJDA-PG 16 -DJDA-PG 19 -DJDA-PG 21 -DJDA-PG 25 -DJDA-PG 29 -DJDA-PG 36 -DJDA-PG 42 -DJDA-PG 48 -DJDA-PG 63 -D
JDA-PG 7 -BJDA-PG 9 -BJDA-PG 11 -BJDA-PG 13.5-BJDA-PG 16 -BJDA-PG 19 -BJDA-PG 21 -BJDA-PG 25 -BJDA-PG 29 -BJDA-PG 36 -BJDA-PG 42 -BJDA-PG 48 -BJDA-PG 63 -B
3~64~85~106~1210~1412~1513~1815~1918~2522~3230~3834~4442~50
88891010101112
13.514.51427
12.515.218.620.422.523.528.329.53747545970
Material:Nylon plasticHermetic seal:Nitrile rubberAmbient temperature:quiescent state-40°C to 100°C,short time to 120°C dynamic-20°C to 80°C, short time to 100°CSupply color:Grey
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
Model and size
Model and size
Product Characteristics
Product Characteristics
JDA-MPG METAL CABLE GLAND
JDA-PKM-P PKM METAL CABLE GLAND
JDA-HSK-EX-P EX PLASTIC CABLE GLAND
B(mm) Wrench size(mm)A(mm)Artice No. Thread Dimension
Clamping range(mm)
Wrench size(mm)A(mm)Artice No. Thread Dimension
Clamping range(mm)
Wrench size(mm)A(mm) A(mm)Artice No. Clamping range
(mm)
JDA-MPG 7JDA-MPG 9JDA-MPG 11JDA-MPG 13JDA-MPG 16JDA-MPG 21JDA-MPG 29JDA-MPG 36JDA-MPG 42JDA-MPG 48
JDA-PKM-P 7JDA-PKM-P 9JDA-PKM-P11JDA-PKM-P13
JDA-HSK-EX-P 7JDA-HSK-EX-P 9JDA-HSK-EX-P 11JDA-HSK-EX-P 13JDA-HSK-EX-P 16JDA-HSK-EX-P 21JDA-HSK-EX-P 29JDA-HSK-EX-P 36JDA-HSK-EX-P 42JDA-HSK-EX-P 48
3~6.54~85~106~128~1413~1818~2522~3230~3837~44
8889101111131415
12.515.218.620.422.528.3374754
59.3
15192224273342526065
PG 7PG 9PG11PG13.5
6~88~1010~212~14
5667
15172224
PG 7PG 9PG 11PG 13.5PG 16PG 21PG 29PG 36PG 42PG 48
3~6.54~85~106~128~1413~1818~2522~3230~3837~44
56677889910
12.515.218.620.422.528.3374754
59.3
14172022243040506065
Material:Body:nickel-plated brass seal:polymide 66,Sealing:NBRProtection degree:Within the clamping range,its protection degree can reach IP68Properties:succeed in the experiment of IEC-60077-1999 resistance to vibration and impact.Temperature Range:Stat:Min-40°CMax 100°C,short-term120°C Dyn,:Min-20°C,Max80°C,short-term 100°C
Material:Body:nickel-plated brass barss Sealing:NBRProtection degree :Within the clamping range , its protection degree can reach IP65
Material:Polyamide 66, sealing:NBRColor:Grey white(RAL 7035),Black(RAL 9005)Protection degree:Using suitable 0-sealings within the clamping range, its protection degree can reach IP68Temperature Range:Stat. :Min-40°C,Mlax 100°C,Short-term 120°CDyn. :Min-20°C,Max 80°C,Short-term100°CProperties:V2(94),free of halogen, phosphor and cadmium, passed RoHS UV -resistance ,ageing-resistance certificatesEX degree:Exe II T5 Certificate NO. :CNEx07.0311U
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
Model and size
Model and size
Product Characteristics
Product Characteristics
Product Characteristics
JDA-HSM-EX-P EX METAL CABLE GLAND
JDA-RG-PG RUBBER GROMMET PG
JDA-SP-PG SCREW PLUG
B(mm) Wrench size(mm)A(mm)Artice No. Thread Dimension
A(mm) B(mm) Da(mm)
A(mm) B(mm) Da(mm)
H(mm) H1(mm)Artice No.
Artice No.
Thread AD(mm)
Clamping range(mm)
Mater:Body:nickel-plated brass Seal:Polyamide 66,Sealing:NBRProtection degree:With the clamping range its protection degree can reach IP68Properties:succeed in the experiment of IEC-60077-1999 resistance to vibrationand impact. Temperature Range:Stat, :Min-40°C,Max100°C,Short-term120°C,Dyn, :Min-20°C, Max80°C,Short-term 100°C Ex degree:Exe II 15 Cerfificale NO:CNEx07.03126
Mode of protection :IP67 acc,to EN 60529Temperature range:-40°C…+100°CTest standard:EMKO TUI(03-SEC)F1001/84Semko report:410375Halogen-free
Material:nylon plasticProtection degree:IP54Ambient temperature:-40°C to 100°CSupply color:Grey,Black
JDA-HSM-E×-P 7JDA-HSM-E×-P 9JDA-HSM-E×-P11JDA-HSM-E×-P13JDA-HSM-E×-P16JDA-HSM-E×-P21JDA-HSM-E×-P29JDA-HSM-E×-P36JDA-HSM-E×-P42JDA-HSM-E×-P48
JDA-RG-PG 7JDA-RG-PG 9JDA-RG-PG 11JDA-RG-PG 16JDA-RG-PG 21JDA-RG-PG 29JDA-RG-PG 36
JDA-SP-PG 7JDA-SP-PG 9JDA-SP-PG 11JDA-SP-PG 13.5JDA-SP-PG 16JDA-SP-PG 21JDA-SP-PG 29JDA-SP-PG 36JDA-SP-PG 42JDA-SP-PG 48
8.58.599
10.58.511.513.513.514.5
12.513131315
13.51618
18.519.5
15192225273344556268
12.515.218.622.528.33747
3~55~7
7~1010~1414~2020~2626~35
13161923293848
0.5~21~41~41~41~41~41~4
20212428354658
12.617.819.821.624.628.534.9
5.410.312.714.717.620
23.9
PG 7PG 9PG 11PG 13.5PG 16PG 21PG 29PG 36PG 42PG 48
3~6.54~8
5~106~128~14
13~1818~2522~3230~3837~44
566778899
10
12.515.218.620.422.528.3374754
59.3
14172022243040506065
Φmm(Cabe)
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Model and size
Model and size
Model and size
Product Characteristics
Product Characteristics
Product Characteristics
JDA-MSP-PG METAL SCREW PLUG
JDA-HP-PG HOLE PLUG
JDA-DPM-P HEXAGON PLUG
B(mm) Wrench size(mm)A(mm)Artice No.
A(mm) B(mm) H(mm)Wrenchsize(mm)
TheradDimension
Artice No.
Artice No.
Aperture of the steel board
od of theplug Thickness Total length
A D L1 L
Material:Nickel-plated brassProtection degree:IP68
Material:PA66,94-V2 Color:Black(RAL 9005) Temperature Range:Min-40°C,Max 100°C Application:To cover the spare holes by pushing the plug with your hand, you can finish the assembly easily without additional tools,suitable for the steel borad below 3.2mm
Material:Nickel-plated brassProtection degree:IP68
JDA-MSP-PG 7JDA-MSP-PG 9JDA-MSP-PG 11JDA-MSP-PG 13.5JDA-MSP-PG 16JDA-MSP-PG 21JDA-MSP-PG 29JDA-MSP-PG 36JDA-MSP-PG 42JDA-MSP-PG 48
566
6.56.5789
1010
899
9.59.51112151616
14172022243039505764
JDA-DPM-P 7JDA-DPM-P 9JDA-DPM-P 11JDA-DPM-P 13JDA-DPM-P 16JDA-DPM-P 21JDA-DPM-P 29JDA-DPM-P 36JDA-DPM-P 42JDA-DPM-P 48
PG 7PG 9PG 11PG 13.5PG 16PG 21PG 29PG 36PG 42PG 48
56677789
1010
12.515.218.620.422.528.3374754
59.3
14172022243040506065
89910101112151616
JDA-HP-PG 8JDA-HP-PG10JDA-HP-PG13JDA-HP-PG16JDA-HP-PG19JDA-HP-PG22JDA-HP-PG26JDA-HP-PG30
7.89.5
12.715.919
22.225.530
11.913
16.919.822.924.928.334.2
1.61.61.61.61.61.61.61.6
810.510.510.510.511.511.511.5
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.comJD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Artcle no. Processing Size Ventilation fan SizeAJDA-V 60JDA-V 80
Material: SUS304JDA-L65
Material: SUS304 Material: Aluminium
Material: SUS304JDA-H65
JDA-H75 JDA-H65 JDA-H55 JDA-D30L JDA-D25L JDA-D30S JDA-D25S
Material: Steel (Zinc pla�ng)
Use only p-type
Material: SUS304JDA-B50
JDA-L75JDA-L55
JDA-B60JDA-B40
JDA-L75 JDA-L65 JDA-L55JDA-B60
JDA-PSK50 JDA-PSK35 JDA-PSK20
JDA-H75JDA-H55
JDA-B50 JDA-B40
50 ±0.3mm71.5±0.3mm
63~65Ø88~90Ø
60Ø80Ø
It is easy to exhaust heat of inside box outsideIt is easy to install cooling pan inside the boxIt is designed to prevent the penetra�on of rain
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
Material: NylonAll hinge type products
Material: ABS Material: SUS304
JDA-ES
Back SideFront Side
Material: SUS304 etcAll hinge type products
Material: SUS304All hinge type products
Material: Aluminium Medium and large plas�c Boxes
Material: ABS Frame,support,hinge,handle
Material: ABS All plas�c box products
Material: Steel (Zink pla�ng) All plas�c box products
JDA-PK JDA-SK JDA-K40
日煬科技有限公司JD Auspice Co., Ltd
JDA
JD Auspice Co.,Ltd. TEL: 886-2-8991-2796 FAX: 886-2-8991-9298 [email protected] www.jdauspice.com
採用高強度ABS、PC耐火材料製成,適用於端子箱、配電盤、儀錶箱、電力設備控制箱及各種自動化領域