TOC and Checklist

GENERAL INFORMATIONGI-1 April 15, 2008GI-2 April 15, 2008GI-3 April 15, 2008GI-4 April 15, 2008GI-5 April 15, 2008GI-6 April 15, 2008GI-7 April 15, 2008GI-8 April 15, 2008GI-9 April 15, 2008GI-10 April 15, 2008GI-11 April 15, 2008GI-12 April 15, 2008GI-13 April 15, 2008GI-14 April 15, 2008GI-15 April 15, 2008GI-16 April 15, 2008GI-17 April 15, 2008GI-18 April 15, 2008GI-19 April 15, 2008GI-20 April 15, 2008GI-21 April 15, 2008GI-22 April 15, 2008GI-23 April 15, 2008GI-24 April 15, 2008GI-25 April 15, 2008GI-26 April 15, 2008GI-27 April 15, 2008GI-28 April 15, 2008GI-29 April 15, 2008GI-30 April 15, 2008GI-31 April 15, 2008GI-32 April 15, 2008GI-33 April 15, 2008

CYLINDERS & KEYINGCK-1 April 15, 2008CK-2 April 15, 2008CK-3 April 15, 2008CK-4 April 15, 2008CK-5 April 15, 2008CK-6 April 15, 2008CK-7 April 15, 2008CK-8 April 15, 2008CK-9 April 15, 2008CK-10 April 15, 2008CK-11 April 15, 2008CK-12 April 15, 2008CK-13 April 15, 2008CK-14 April 15, 2008CK-15 April 15, 2008CK-16 April 15, 2008CK-17 April 15, 2008

CK-18 April 15, 2008CK-19 April 15, 2008CK-20 April 15, 2008CK-21 April 15, 2008 CK-22 April 15, 2008CK-23 April 15, 2008CK-24 April 15, 2008CK-25 April 15, 2008CK-26 April 15, 2008CK-27 April 15, 2008CK-28 April 15, 2008CK-29 April 15, 2008CK-30 April 15, 2008CK-31 April 15, 2008CK-32 April 15, 2008CK-33 April 15, 2008CK-34 April 15, 2008CK-35 April 15, 2008CK-36 April 15, 2008CK-37 April 15, 2008

BORED LOCKSBL-1 April 15, 2008BL-2 April 15, 2008BL-3 April 15, 2008BL-4 April 15, 2008BL-5 April 15, 2008BL-6 April 15, 2008BL-7 April 15, 2008BL-8 April 15, 2008BL-9 April 15, 2008BL-10 April 15, 2008BL-11 April 15, 2008BL-12 April 15, 2008BL-13 April 15, 2008BL-14 April 15, 2008BL-15 April 15, 2008BL-16 April 15, 2008BL-17 April 15, 2008BL-18 April 15, 2008BL-19 April 15, 2008BL-20 April 15, 2008BL-21 April 15, 2008BL-22 April 15, 2008BL-23 April 15, 2008BL-24 April 15, 2008BL-25 April 15, 2008BL-26 April 15, 2008BL-27 April 15, 2008BL-28 April 15, 2008BL-29 April 15, 2008BL-30 April 15, 2008BL-31 April 15, 2008

BL-32 April 15, 2008BL-33 April 15, 2008BL-34 April 15, 2008BL-35 April 15, 2008BL-36 April 15, 2008BL-37 April 15, 2008BL-38 April 15, 2008BL-39 April 15, 2008BL-40 April 15, 2008BL-41 April 15, 2008BL-42 April 15, 2008BL-43 April 15, 2008BL-44 April 15, 2008BL-45 April 15, 2008BL-46 April 15, 2008BL-47 April 15, 2008BL-48 April 15, 2008BL-49 April 15, 2008BL-50 April 15, 2008BL-51 April 15, 2008BL-52 April 15, 2008BL-53 April 15, 2008BL-54 April 15, 2008BL-55 April 15, 2008BL-56 April 15, 2008BL-57 April 15, 2008BL-58 April 15, 2008BL-59 April 15, 2008BL-60 April 15, 2008BL-61 April 15, 2008BL-62 April 15, 2008

MORTISE LOCKSML-1 April 15, 2008ML-2 April 15, 2008ML-3 April 15, 2008ML-4 April 15, 2008ML-5 April 15, 2008ML-6 April 15, 2008ML-7 April 15, 2008ML-8 April 15, 2008ML-9 April 15, 2008ML-10 April 15, 2008ML-11 April 15, 2008ML-12 April 15, 2008ML-13 April 15, 2008ML-14 April 15, 2008ML-15 April 15, 2008ML-16 April 15, 2008ML-17 April 15, 2008ML-18 April 15, 2008ML-19 April 15, 2008ML-20 April 15, 2008

ML-21 April 15, 2008ML-22 April 15, 2008ML-23 April 15, 2008ML-24 April 15, 2008ML-25 April 15, 2008ML-26 April 15, 2008ML-27 April 15, 2008ML-28 April 15, 2008ML-29 April 15, 2008ML-30 April 15, 2008ML-31 April 15, 2008ML-32 April 15, 2008ML-33 April 15, 2008ML-34 April 15, 2008ML-35 April 15, 2008ML-36 April 15, 2008ML-37 April 15, 2008ML-38 April 15, 2008ML-39 April 15, 2008ML-40 April 15, 2008ML-41 April 15, 2008ML-42 April 15, 2008ML-43 April 15, 2008ML-44 April 15, 2008ML-45 April 15, 2008ML-46 April 15, 2008ML-47 April 15, 2008ML-48 April 15, 2008ML-49 April 15, 2008ML-50 April 15, 2008ML-51 April 15, 2008ML-52 April 15, 2008ML-53 April 15, 2008ML-54 April 15, 2008ML-55 April 15, 2008ML-56 April 15, 2008ML-57 April 15, 2008ML-58 April 15, 2008ML-59 April 15, 2008ML-60 April 15, 2008ML-61 April 15, 2008ML-62 April 15, 2008ML-63 April 15, 2008ML-64 April 15, 2008ML-65 April 15, 2008ML-66 April 15, 2008ML-67 April 15, 2008ML-68 April 15, 2008ML-69 April 15, 2008ML-70 April 15, 2008ML-71 April 15, 2008

ML-72 April 15, 2008ML-73 April 15, 2008ML-74 April 15, 2008ML-75 April 15, 2008ML-76 April 15, 2008ML-77 April 15, 2008ML-78 April 15, 2008ML-79 April 15, 2008ML-80 April 15, 2008ML-81 April 15, 2008ML-82 April 15, 2008ML-83 April 15, 2008ML-84 April 15, 2008ML-85 April 15, 2008ML-86 April 15, 2008ML-87 April 15, 2008ML-88 April 15, 2008ML-89 April 15, 2008ML-90 April 15, 2008ML-91 April 15, 2008ML-92 April 15, 2008ML-93 April 15, 2008ML-94 April 15, 2008ML-95 April 15, 2008ML-96 April 15, 2008ML-97 April 15, 2008ML-98 April 15, 2008ML-99 April 15, 2008ML-100 April 15, 2008ML-101 April 15, 2008ML-102 April 15, 2008ML-103 April 15, 2008ML-104 April 15, 2008ML-105 April 15, 2008ML-106 April 15, 2008ML-107 April 15, 2008

MULTI-POINTLOCKING HARDWAREMP-1 April 15, 2008

MP-2 April 15, 2008

MP-3 April 15, 2008

MP-4 April 15, 2008

MP-5 April 15, 2008

MP-6 April 15, 2008

MP-7 April 15, 2008

MP-8 April 15, 2008

MP-9 April 15, 2008

MP-10 April 15, 2008

MP-11 April 15, 2008

MP-12 April 15, 200

-- Checklist --Your price book should contain the following dated pages. If any pages are missing, return this list with the missing itemscircled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________

DOOR CLOSERS/HOLDERS & STOPS DC-1 April 15, 2008DC-2 April 15, 2008DC-3 April 15, 2008DC-4 April 15, 2008DC-5 April 15, 2008DC-6 April 15, 2008DC-7 April 15, 2008DC-8 April 15, 2008DC-9 April 15, 2008DC-10 April 15, 2008HS-1 April 15, 2008HS-2 April 15, 2008

EXIT DEVICESED-1 April 15, 2008ED-2 April 15, 2008ED-3 April 15, 2008ED-4 April 15, 2008ED-5 April 15, 2008ED-6 April 15, 2008ED-7 April 15, 2008ED-8 April 15, 2008ED-9 April 15, 2008ED-10 April 15, 2008ED-11 April 15, 2008ED-12 April 15, 2008ED-13 April 15, 2008ED-14 April 15, 2008ED-15 April 15, 2008ED-16 April 15, 2008ED-17 April 15, 2008ED-18 April 15, 2008ED-19 April 15, 2008ED-20 April 15, 2008ED-21 April 15, 2008ED-22 April 15, 2008ED-23 April 15, 2008ED-24 April 15, 2008ED-25 April 15, 2008ED-26 April 15, 2008ED-27 April 15, 2008ED-28 April 15, 2008ED-29 April 15, 2008ED-30 April 15, 2008ED-31 April 15, 2008ED-32 April 15, 2008ED-33 April 15, 2008ED-34 April 15, 2008

ED-35 April 15, 2008ED-36 April 15, 2008ED-37 April 15, 2008ED-38 June 30, 2006ED-39 June 30, 2006ED-40 April 15, 2008ED-41 April 15, 2008ED-42 April 15, 2008ED-43 April 15, 2008ED-44 April 15, 2008ED-45 April 15, 2008ED-46 April 15, 2008ED-47 April 15, 2008ED-48 April 15, 2008ED-49 April 15, 2008ED-50 April 15, 2008ED-51 April 15, 2008ED-52 April 15, 2008ED-53 April 15, 2008ED-54 April 15, 2008ED-55 April 15, 2008ED-56 April 15, 2008ED-57 April 15, 2008ED-58 April 15, 2008ED-59 April 15, 2008ED-60 April 15, 2008ED-61 April 15, 2008ED-62 April 15, 2008ED-63 April 15, 2008ED-64 April 15, 2008ED-65 April 15, 2008ED-66 April 15, 2008ED-67 April 15, 2008ED-68 April 15, 2008ED-69 April 15, 2008ED-70 April 15, 2008ED-71 April 15, 2008ED-72 April 15, 2008ED-73 April 15, 2008

AUXILIARY LOCKSAL-1 April 15, 2008AL-2 April 15, 2008AL-3 April 15, 2008AL-4 April 15, 2008AL-5 April 15, 2008AL-6 April 15, 2008AL-7 April 15, 2008AL-8 April 15, 2008AL-9 April 15, 2008

ELECTRICALEL-1 April 15, 2008EL-2 April 15, 2008EL-3 April 15, 2008EL-4 April 15, 2008EL-5 April 15, 2008EL-6 April 15, 2008EL-7 April 15, 2008EL-8 April 15, 2008EL-9 April 15, 2008EL-10 April 15, 2008EL-11 April 15, 2008EL-12 April 15, 2008EL-13 June 16, 2006EL-14 April 15, 2008EL-15 April 15, 2008

PROFILE SERIESPS-1 April 15, 2008PS-2 April 15, 2008PS-3 April 15, 2008PS-4 April 15, 2008PS-5 April 15, 2008PS-6 April 15, 2008PS-7 April 15, 2008PS-8 April 15, 2008PS-9 April 15, 2008PS-10 April 15, 2008PS-11 April 15, 2008PS-12 April 15, 2008PS-13 April 15, 2008PS-14 April 15, 2008PS-15 April 15, 2008PS-16 April 15, 2008PS-17 April 15, 2008PS-18 April 15, 2008PS-19 April 15, 2008PS-20 April 15, 2008PS-21 April 15, 2008PS-22 April 15, 2008PS-23 April 15, 2008PS-24 April 15, 2008PS-25 April 15, 2008

-- Checklist --Your price book should contain the following dated pages. If any pages are missing, return this list with the missing itemscircled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________

PRICE BOOK

EFFECTIVE DATE:

April 15, 2008

THIS PRICE BOOK SUPERSEDES AND TAKESPRECEDENCE OVER ANY OF OUR PRODUCT

CATALOGS IN TERMS OF PRODUCT AVAILABILITY.

CONTACT SARGENT MANUFACTURING CO. FOR PRICES ANDAVAILABILITY OF NON-STANDARD AND SPECIAL ITEMS NOT

LISTED IN THIS PRICE BOOK

ANNOUNCEMENT

© SARGENT Manufacturing Company 2008Contact us at: 800-727-5477 or visit www.sargentlock.com

April 15, 2008 | Minimum Order $250

General InformationTerms & Conditions GI-1 - GI-5RGA Policy GI-4Product Modification GI-5Limited Warranty GI-6 - GI-7Finishes GI-8Merchandising Aids GI-9Weight Charge - Screw Substitutions GI-10Master Prefix Listing GI-11 - GI-15Business Hours & Holiday Schedule GI-16Who's Who at Sargent GI-17 - GI-19Ordering Tips GI-20 - GI-22Order Forms GI-23 - GI-33

Cylinders & KeyingHow to Order / Key Control Types CK-1Keying Charges CK-2 - CK-3Key Charts, Key Wizard Software CK-4Mortise, Rim Cylinders & Parts CK-5Rings, Turn Knobs & Mail Box Cylinders CK-6Cylindrical Lock Cylinders & Parts CK-7SARGENT XC Series Cylinders CK-8 - CK-9SARGENT Removable Cores & Cylinders CK-10SARGENT Old Style Removable Core Cyl. CK-10Small Format Interchangeable Cores & Cylinders CK-11Small Format -XC- Interchangeable Cores & Cyl. CK-12Pins, Springs, Drives & Keying Kits CK-13Keyblanks CK-14 - CK-15SARGENT Cut Keys & Competitors Keyways CK-16KESO F1 Key System CK-17 - CK-21KESO System CK-22 - CK-26Signature Key System CK-27 - CK-30SARGENT V-10 Cylinder CK-31 - CK-37

Bored LocksHow to Order / ANSI Finish & Function Comparison BL-1T-Zone (11 Line) BL-2 - BL-2110 Line BL-22 - BL-337 Line BL-34 - BL-417500 Line BL-42 - BL-436500 Line BL-44GX (3 Line) BL-45DL-Studio Collection BL-46 - BL-498 Line BL-50 - BL 576 Line BL-58 - BL-615500 Line BL-62

Mortise Locks 7800/8200How to Order / ANSI Finish & Function Comparison ML-18200 Line (levers) ML-2 - ML-257800 Line (Knobs) ML-26 - ML-398200 Deadlocks ML-40Distributor Bulk Pack Trim Program ML-41 - ML-447800/8200 Lockbodies ML-457800/8200 Working Trim Sets ML-46 - ML-57

7800/8200 Assemblies & Parts ML-58 - ML-668200 Strikes & 7700/8100 Spindles/Strikes ML-678200/7800 Parts ML-68 - ML-70How to Order / ANSI Finish & Function Comparison ML-717900 Mortise Lock ML-72 - ML-88

High Security Mortise Lock 9200How to Order - ANSI Finish & Function Comparison ML-899200 & M9200 - Levers ML-90 - ML-979200 & M9200 - Knobs ML-98 - ML-1039200 Deadlock, Lockbodies ML-1049200 Parts ML-1059200 Inside Trim Set ML-1069200 Outside Trim Set ML-107

Multipoint Locking HardwareHow to Order - ANSI Finish & Function Comparison MP-17000 Series MP-2 - MP-3NB7000 Series MP-4 - MP-5WD7000 Series MP-6 - MP-7ET Lever Control Trim MP-8 - MP-9ER/ES/ET Trim – Studio Collection MP-10ER/ES/ET Trim– Metro Elements MP-107000 Strikes, Locking Slide & Spindle Kits MP-11Parts MP-12

Door Closers/Holders & StopsHow to Order / ANSI Finish & Function Comparison DC-1Additional Features DC-21431 / 281 / 351 Series DC-3268, 269, 281 Security Package Closer DC-4421 Cam Action Door Closer DC-4268, 269, 278 Concealed Closers DC-4Finish Options DC-5Arms & Accessories DC-6Bodies/Covers/Retrofit Kits DC-71331 / 1130 Series DC-8Parts DC-9 - DC-10Overhead Holders & Stops HS-1Electromagnetic Door Holders HS-2

Exit DevicesHow to Order - ANSI Finish & Function Comparison ED-120 Series ED-2 - ED-330 Series ED-4 - ED-59898 Reversible Stocking Exit ED-6 - ED-78888 Reversible Stocking Exit ED-8 - ED-980 Series ED-10 - ED-379400 Series ED-38 - ED-3990 Series ED-40 - ED-45Trim ED-46 - ED-538893/8895 Inactive & Active Push Bars ED-53Mullions & Accessories ED-54 - ED-57Parts ED-58 - ED-68P888 Exit Device ED-70 - ED-71P800 Exit Device ED-72 - ED-73

TOC-1TABLE OF CONTENTS

HOLDERS & STOPSApril 15, 2008 | Minimum Order $250


Auxiliary Locks460-470 Series AL-1480 Series AL-24870 Series AL-3460-480-4870 Strikes & Parts AL-44870 Parts AL-5Locker, Utility, & Cabinet Locks AL-6114/115 Hospital Latch & Parts AL-6 - AL-7758 Padlock & Parts AL-8858 Padlock & Parts AL-9

ElectricalElectro-Mechanical Locksets EL-1Electro-Mechanical Exits EL-2ElectroLynx / Wiring Diagram Service EL-3Electronic Accessories EL-4 - EL-7Alarms - 540/550/5100/5800 EL-8 - EL-9Fire Guard Door Closers EL-10 - EL-11M Power Low Energy Door Operator EL-12 - EL-13Parts EL-14 - EL-15

Profile Series - Stand Alone ProductsHow to Order / ANSI Finish & Function Comparison PS-110 Line Cylindrical Lock - KP, G1, RF PS-2 - PS-38200 Series Mortise Lock - KP, G1, RF PS-4 - PS-780 Series - Exit Device - KP, G1, RF PS-8 - PS-9Accessories PS-10Parts & Accessories PS-1110 Line Parts & Accessories PS-128200 Series Parts & Accessories PS-13 - PS-1480 Series Trim & Trim Kits PS-1580 Series Parts & Accessories PS-16

Profile Series - v.N1 Wiegand Interface Open ArchitectureHow to Order / ANSI Finish & Function Comparison PS-1710 Line Cylindrical Lock - v.N1 PS-18 - PS-198200 Series Mortise Lock - v.N1 PS-20 - PS-2180 Series - Exit Device - v.N1 PS-22 - PS-23Accessories PS-24 - PS-25


TOC-2TABLE OF CONTENTS


GENERAL INFORMATION

TABLE OF CONTENTS



GENERAL INFORMATION

Terms and Conditions ...............................................................GI-1





Limited Warranty........................................................................GI-6

Limited Warranty........................................................................GI-7

Finishes .....................................................................................GI-8

Merchandising Aids ...................................................................GI-9

Weight Chart - Screw Substitutions ........................................GI-10

Master Prefix Listing (1-26) .....................................................GI-11

Master Prefix Listing (28-68) ...................................................GI-12

Master Prefix Listing (69-84) ...................................................GI-13

Master Prefix Listing (91-TL)...................................................GI-14

Master Prefix Listing (TR-WS) ................................................GI-15

Business Hours, Holiday Schedule, Website Information .......GI-16

Who's Who at SARGENT........................................................GI-17



Ordering Tips...........................................................................GI-20

Ordering Tips...........................................................................GI-21

Ordering Tips...........................................................................GI-22

Keying Order Form..................................................................GI-23

Keying Order Form..................................................................GI-24

Locksets Order Form...............................................................GI-25

Exit Devices Order Form.........................................................GI-26

Door Closers Order Form........................................................GI-27

Miscellaneous Items Order Form ............................................GI-28

Signature Series Order Form..................................................GI-29

KESO Authorized Signature Form ..........................................GI-30

KESO Authorization Form.......................................................GI-31

KESO 24 Hour Key Order Form..............................................GI-32

Key Wizard™ Registration Form .............................................GI-33

GI-1GENERAL INFORMATION

TERMS & CONDITIONS



AcceptanceSARGENT® reserves the right to decline an order, in whole or in part, when the type or quantity of goods or creditworthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion.

Purchase Orders, QUOTE requests, Acknowledgements or the like issued by the Purchaser that have contrary standardterms and conditions are not binding on SARGENT®, unless such terms and conditions are approved in a separate written agreement by SARGENT’s authorized representatives. In the event of an acceptance of Purchaser’s PurchaseOrder by SARGENT®, the Purchaser agrees that such acceptance is solely conditioned on Purchaser’s acceptance ofthe terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser’sPurchase order. The terms and conditions in Purchaser’s Purchase order which conflict with terms and conditions of thisinstrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreementbetween SARGENT® and the Purchaser.

In the event that SARGENT® does not enforce or require strict performance of any term or condition hereof, or of anyother document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement ofstrict performance will not waive, affect or diminish any right of SARGENT® to enforce or require strict performance of such term or condition in the future.

PricesAll prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effectat the time of order acceptance.

Possession of this price list does not constitute an agreement to sell.

We reserve the right to correct clerical, stenographic and other obvious errors at any time.

Terms:2% tenth net 30 days after statement date.

It is understood that SARGENT® may impose and charge a finance charge which is the lesser or one and one-half percent (1-1/2%) per month or the highest rate allowed by law on any amount which becomes past due and delinquent.Additionally the Customer shall be responsible for all collection costs, court costs and reasonable attorney’s fees (whereallowed by law) in connection with the recovery of any delinquent amount.

FreightAll orders are shipped FOB factory/warehouse, except as expressly provided below. When delivered to the TransportationCompany, the Purchaser assumes the risk of loss or damage in transit.

Customer orders with net product value in excess of $7,000.00 will be shipped prepaid to a single destination pointin the United States.

Customer order with net product value less than $7,000.00 will be shipped prepaid by SARGENT’s carrier of choice,and the shipping charges will be added to Customer’s invoice. SARGENT® will choose the carrier and routing. If aCustomer requests an alternative carrier, freight charges will be incurred on Customer’s invoice.

Great Grand Master keys, Grand Master keys, Master keys, Construction Master keys, Control Keys, LotDayKeyswhich are shipped separate from customer order, for security reasons, with net product value less than $7,000.00will be shipped prepaid by SARGENT’s carrier of choice, and the shipping charges will be added to Customer’sinvoice.

Turbo Orders - All 1-Week Turbo orders are GUARANTEED to ship from SARGENT® 5 working days after receipt oforder or SARGENT® will pay freight costs(all orders must have complete information for processing). If Turbo order,when entered, is held for credit reasons SARGENT® will not be responsible for paying freight.




TERMS & CONDITIONS

Minimum Invoice:Minimum invoice for complete product is $250.00 net product value. The minimum invoice for parts orders is $100.00net product value.

This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master KeyedPadlocks and Factory Generated Bitting Lists.

Same day order expedites will be invoiced at book net.

Quotations:If SARGENT® elects to offer a QUOTE, such QUOTE will be valid for one hundred twenty (120) days. Complete shipmentof the order must be accepted by Purchaser within normal shipping lead times.

The QUOTE number must be referenced on the order.

Any invoiced order that has the incorrect discount applied to it and did not have a QUOTE copy attached to the orderor the QUOTE number written on the order will have a service fee of $75.00 net DEDUCTED from any sales creditissued for the difference in discount.

The QUOTE is null and void if the Purchase Order does not include ALL product lines listed on the QUOTE or if thequantities for an item covered by the QUOTE deviate by 10% or more.

With the issuance and acceptance of a QUOTE for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by SARGENT® to sell its products. This would beinclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor’s ineligibility forPrice Concession Authorizations, or other actions in SARGENT’s discretion.

SARGENT® and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse aDistributor’s request to quote a price other than SARGENT’s standard list price and regardless of whether SARGENT®

or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders.

Non-Cataloged Products:Products not cataloged or listed in this price book will be considered as special products, and will not be manufacturedwithout prior approval from SARGENT®.

A minimum special handling charge of $50.00 will be added for non-cataloged product. Any additional labor or materialrequired will be charged accordingly.

Special products require special handling, and therefore standard lead times may not apply. Please consult with yourSales Representative for further details.

Changes / Cancellation of Orders:Changes or cancellations to an order will result in a charge of costs for material and labor expenses that have beenincurred prior to notification from Customer. Handling charges are billed on Customer’s original order.

Suspended Line Items:If a line item is suspended due to insufficient information, we will notify you via “Q” fax. If a response is not receivedwithin 5 business days of the fax, the item(s) will be cancelled off the order. A new order will need to be placed forthe cancelled item(s).


TERMS & CONDITIONS



All Non-Cataloged Goods and SARGENT® Turboship Express and One Week Orders may not be changed or cancelled.

All change requests for goods, other than for the two reasons stated above, must be submitted in writing to CustomerService within two (2) business days of receipt of acknowledgement of the order.

Add–On Orders to QUOTE:Any new order requesting special pricing to match an existing QUOTE number, which has already been ordered, willbe accepted up to 60 days after the acknowledgement of the original order. All add-on orders must reference theoriginal factory order number and the corresponding QUOTE number to receive the quoted pricing discount. Add-onorders for stock will not be accepted.

Packaging:Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardwareto be used on a specific hardware project.

Delivery:Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times.Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keyinginformation, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtainingthe necessary information for order processing. Manufacturing lead time will begin once all information is received toprocess an order. SARGENT® will use reasonable efforts to deliver products as estimated, but makes no guarantee’sas to delivery dates.

SARGENT® will not be liable for back charges incurred based on availability of product or as a result of delays indelivery caused by insufficient information required to process an order.

SARGENT® will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causesbeyond our control, including the delivery of material to us. Under no circumstances shall SARGENT® be liable oraccountable for consequential damages due to failure of delivery.

Claims:In the event of Company or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders mustbe submitted in writing to Customer Service within thirty (30) days from receipt of material.

Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier.

Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact aSARGENT® Customer Service Representative upon submittal of the order. SARGENT® will obtain requested insuranceand the additional cost will be included on Customer’s invoice.

Invoice Deduction:A SARGENT® Sales Representative or Customer Service Representative must be notified of any disputed invoiceswithin sixty 60 days from the date of invoice. Deductions should only be taken for the disputed amount and the balanceof the invoice is due and payable within standard payment terms.


TERMS & CONDITIONS



Returned Goods:

It is the policy of SARGENT® to not accept returns of any materials that are correctly furnished as per the Distributor’sPurchase Order. Return of product due to customer order error or accommodation must be pre-arranged with SARGENT®

and approved in writing by Sales Management.

All products returned as “Goodwill” must meet the following criteria to be considered a return:

• Be in original, unmarked, and undamaged cartons.• Be valued in excess of $250.00 net.• Shipped and invoiced within the previous 120 days.• Custom, non-cataloged goods, master-keyed or SARGENT® Turboship product is not returnable.

A MINIMUM restocking fee of 45% will be charged. Upon receipt and verification by SARGENT® that the returnedmerchandise meets the foregoing conditions, a credit will be issued for the original invoice amount less the MINIMUM45% restocking fee.

Defective goods and “Goodwill” products that meet the foregoing criteria, may be returned by fulfilling the following conditions:

• Send an RGA request in writing to the SARGENT® Sales Representative serving the Purchaser’s area.• Ensure the RGA labels that are sent to Purchaser by SARGENT® are visible on return goods shipment.• Ensure that the RGA number appears on the return shipment label and is legible.• Return the authorized merchandise within sixty (60) days from the date of RGA issuance date.• Return shipments must be freight prepaid to the location specified on the RGA. SARGENT® is not liable for

damages to product during shipping.

No credit may be taken or issued prior to RGA approval and receipt of product.

All defective goods within the terms of our limited warranty may be returned for credit or replacement.

Taxes:Prices do not include any present or future Federal, State, or Local property, license, privilege, sales, use, excise,gross receipts or other like taxes or assessments, which may result from transactions or any services performed inconnection herewith.

Governing Law:The rights and obligations of the parties shall be governed by the laws of the State of Connecticut, excluding anyconflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement.

Limited Warranty:The Terms and Conditions outlined above are subject to SARGENT® Limited Warranty, which is included in this Price List and incorporated herein by reference.


TERMS & CONDITIONS



Product Modifications:SARGENT® products are not designed for or intended for aftermarket modification. The warranty on SARGENT® productsbecomes void if the product is modified in any way, regardless of whether the modification causes or contributes to anyalleged defect. Warranty voiding modifications include, but are not limited to, third-party electrification of non-electricproducts and/or the installation of non-approved or non-SARGENT® components.

If a SARGENT® product is modified it no longer meets industry certification and quality control standards applicable tothe original product and is no longer a genuine SARGENT® product. A modified product may not be sold as a SARGENT®

product and no SARGENT® trademarks or certification marks based on the original SARGENT® product, such as U.L.or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructionssold with the modified product.

All original SARGENT® packaging and literature carries SARGENT® trademarks and must be destroyed if the originalSARGENT® product is modified. Portions of the product that carry a SARGENT® trademark or certification mark, suchas mortise faceplates, lock bodies, etc. must be discarded and/or replaced by the party making the modification. U.L.and other certification testing and marking are also the responsibility of the party making modification. The use ofSARGENT® trademarks on modified products constitutes trademark infringement.

Trademark Use Policy: ASSA ABLOY Americas The following policy (“Policy”) of ASSA ABLOY Americas (“ASSA ABLOY”), and all of its affiliated group companies (collectively, the “Group Companies”), applies to the use of certain intellectual property of all such Group Companies,including all trademarks, names, logos, product images, and related information (the “ASSA ABLOY Marks”). ASSAABLOY Marks are proprietary and critical to the success of ASSA ABLOY and the Group Companies, and may only be used in strict compliance with this Policy.

This Policy covers any person or entity reselling any product of any Group Company with the consent of such GroupCompany (each, an “Approved Reseller”). Each Approved Reseller has a non-exclusive right to use certain of theASSA ABLOY Marks relating to any of the Group Companies for which it is an Approved Reseller, subject to the following conditions:

(1) Approved Reseller’s use of ASSA ABLOY Marks must be truthful, fair, and not misleading;(2) Approved Reseller’s advertising must clearly indicate that it is advertising of the Approved Reseller, and is not

advertising of ASSA ABLOY;(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;(4) Approved Reseller’s advertising must not imply or suggest an association between the Approved Reseller and

ASSA ABLOY other than that of buyer and seller;(5) Approved Reseller’s use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group

Companies, and their products;(6) Approved Reseller’s trade name must be more predominant on Approved Reseller’s advertising than the

ASSA ABLOY Marks;(7) Approved Reseller’s use of ASSA ABLOY Marks must include the trademark symbol ® or TM, as appropriate,

along with the following trademark legend printed in legible text on the Web page or document containing ASSAABLOY Marks: “[describe ASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc.or one of its affiliates in the United States and other countries.”;

(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and (9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an

Approved Reseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Yproducts may use Group Company X trademarks in connection with its sale of Group Company X products, butmay not use Group Company Y trademarks).




LIMITED WARRANTY

ASSA ABLOY reserves the right to review Approved Reseller’s usage of ASSA ABLOY at any time and may:

(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must beimplemented within 30 days of written notice to Approved Reseller;

(b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s prior approval use, which approval may be withheld in its sole discretion;

(c) revoke permission to use ASSA ABLOY Marks at any time for any or no reason days prior written notice toApproved Reseller; and

(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Reseller in the event ApprovedReseller is in violation of this Policy, or of any agreement with ASSA ABLOY or any Group Company.

Approved Reseller’s right to use ASSA ABLOY Marks in no way conveys to Approved any proprietary or economicinterest in any ASSA ABLOY Marks.

Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and liabilities. ASSA ABLOY will vigorously enforce this Policy by seeking all appropriate remedies, including, but not limited to, pecuniary damagesand injunctive relief.

LIMITED WARRANTY:SARGENT® warrants that its products sold under the “SARGENT” trade name in the United States of America arefree from defects in workmanship and materials under normal use and service.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance,improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-SARGENT products or parts.

This warranty is void if any modification is made to the warranty product, regardless of whether the modification causesor contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

The only liability of SARGENT®, in tort or contract whether under this warranty or otherwise, shall be limited to therepair or replacement of any product or component part which shall prove defective as covered by this warranty,within the stated time period listed below, after delivery to the original purchaser.

• T-Zone (11-Line), Bored-In Lever Lock 10 years• 1130, 1331, 1431, 268, 269, 278, 281, 421, 351 Series Closer Body 10 years• 9200/8200/7800, Mortise Lock 10 years• 10L, Bored-In Lever Lock 7 years• 7000/7900 Series Vertical Rod Lock 5 years• 80/90 Series Exit Device or Trim 5 years• Overhead Holders & Stops 5 years• 7L, Bored-In Lever Lock 5 years• 8 Line, Bored-In Knob Lock 3 years• 20/30 and P800 Series Exit Device or Trim 3 years• All Electromechanical and Electronic Products 2 years• All other SARGENT products 1 year


LIMITED WARRANTY



Warranty for Cylinders Factory or Field Combinated:Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite, molybdenum disulfideor Polylube(trademark) are recommended. Petroleum based liquid lubricants should only be used in cylinders inharsh or corrosive environments and should not be missed with dry lubricants.

Warranty for Cylinders Field Combinated:1. Keys shall be cut to the SARGENT® key bitting specifications required for the particular keyway and depth system.2. All pin lengths shall be selected according to prevailing factory standards.3. Original SARGENT® cylinder components, including pin tumblers and key blanks, shall be used.4. We reserve the right to void the warranty if we deem that a malfunction is a result of non-original components

which do not conform to SARGENT® standards.

Keying Systems:All bittings shall be originated or authorized by the SARGENT® Key Systems Department to be compatible with oneanother in a specific type of cylinder (conventional, security, high security, interchangeable core, removable core)and within a particular keying system.

SARGENT® will not pay for the cost of repair performed other than in accordance with this warranty.

Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective ascovered by this warranty. A brief description of the defect will be required. Product will be examined upon return. Inthe event such examination reveals a defect covered by this warranty, the product will be repaired or replaced.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW,ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. SARGENT® MANUFACTURINGCOMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALESREPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THISWARRANTY.

SOME STATE DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONSMAY NOT APPLY TO YOU.

THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICHVARY FROM STATE TO STATE.

SARGENT® Manufacturing Company


FINISH



Finishes

Items will be furnished only in finishes as listed in this price book. Not all finishes are available for all product lines. Consulteach product section for applicable finishes.

SARGENT Symbol BHMA Symbol Material

3 (BHMA 605) Bright brass, clear coated 4 (BHMA 606) Satin brass, clear coated 9 (BHMA 611) Bright bronze, clear coated 10 (BHMA 612) Satin bronze, clear coated 10B (BHMA 613) Dark oxidized satin bronze, oil rubbed 10BL Dark oxidized satin bronze, clear coated14 (BHMA 618) Bright Nickel15 (BHMA 619) Satin Nickel, clear coated20D Statuary bronze dark powder coated 26 (BHMA 625) Bright chromium plated 26D (BHMA 626) Satin chromium plated 32 (BHMA 629) Bright stainless steel 32D (BHMA 630) Satin stainless steel

Exposed Metal Parts Furnished same finish as Escutcheon or Rose Bushing

SARGENT Symbol BHMA Symbol Painted Finishes

EB (BHMA 690) Sprayed bronze enamel or polyester powder coated to match finish 10BED (BHMA 693) Sprayed black enamel or polyester powder coated to match finish 20D EN (BHMA 689) Sprayed aluminum enamel or polyester powder coated EP (BHMA 691) Sprayed bronze enamel or polyester powder coated to match finish 10EAB (BHMA 696) Brass enamel or polyester powder coated to be used with brass finishesERD Red powder coat

When prime coat is required the EN finish will be furnished as this is suitable for painting.


MERCHANDISING AIDS



Cylinder Price

13-4230 Cylinder Display Kit – Includes following cylinders: Signature, KESO, XC (11-) 10L,

10L Standard, Removable Core (6300), Small format Interchangeable Core (7300), V-10 $671.00 Each

T-Zone (11 Line) and GX (3 Line) Series Bored Lock

554 Solid Light Oak Block $146.00 Each

6500 / 7 / 10 Line Cylindrical Lock

510 Solid Light Oak Block $146.00 Each

6 and 8 Line Bored Locks And 480 Deadlock – 2-3/4" Backset Only

13-511 Solid Light Oak Block $153.00 Each

7800 Line Locks

513 SSolid Light Oak Narrow Block Cut for 04, 05, 37, Functions (7800)

514 olid Light Oak Narrow Block Cut for 24, 25, 43, 45, 50 Functions (7800) $166.00 Each

520 Solid Light Oak Narrow Block Cut for 15 Functions (7800)

8200 Line Locks

461 Solid Light Oak Block Cut for 15 Function (8200)

462 Solid Light Oak Block Cut for 24, 25, 45, 50 Functions (8200) $162.00 Each

463 Solid Light Oak Block Cut for 04, 05, 37, Functions (8200)

4870 Line Locks

TBA Solid Light Oak Block – Specify Function – 4874, 4875 or 4877 $145.00 Each

114 and 115 Hospital Latch

575 Solid Light Oak Block for 2 -3⁄4" Backset only $139.00 Each

Exit Devices

517 Solid Light Oak Block For 9710 only

518 Solid Light Oak Block For 9800 with STS trim $283.00 Each519 Solid Light Oak Block For 9900 with STS trim

580 Solid Light Oak Block For 8810 only (E- size rail only)

Door Closers

539-1 (351 Series) Light Oak Finish Block “O” Arm Only

539-2 (1431 Series) Light Oak Finish Block “O” Arm Only $292.00 Each

539-5 (281 Series) Light Oak Finish Block “O” Arm Only

Electrical

82-3726 Solid Light Oak Block For KP8200 $223.00 Each

10-3010 Solid Light Oak Block for 10G77 – Low Profile (Bored-in) $243.00 Each

82-3858 Solid Light Oak Block 8200 Series – Low Profile (Mortise) $249.00 Each

524 Solid Light Oak Block for 8876 – Low Profile (Rim Exit - LHR) $284.00 Each

525 Solid Light Oak Block for 56- (Electric Latch Retraction) 80 Series Exit Device $496.00 Each

Finish Samples

1111 Set of standard finishes on 11⁄4" diameter $49.00 Each

cylinder face plate attached with a bead chain.

(US3, US4, US9, US10B, US10BL, US20D, US26, US26D, US32, US32D, EB, ED, EN, EP, EAB)


WEIGHT CHART



Freight Weight Chart

Shipping weights listed depict an approximation of the average weight for any lock, exit device, or closer and are meant only for

use in estimating weight.

Standard Packing

Product Line

Locksets Function Case Quantity Average Weight Per Case (lbs.)

7800 Line 7805 w/trim 6 42

7900 Line 7904 w/trim 6 42

8200 Line 8205 w/trim 6 42

T-Zone (11 Line) 11G05 10 45

10 Line 10G05 10 45

8 Line 8G05 10 27

7 Line 7G05 10 41

6 Line 6G05 10 21

7500 75G05 10 50

6500 Line 65G05 10 41

5500 Line 55G05 10 22

GX (3 Line) 3U65 10 19

Exit Devices

90 Series 9863 w/trim 1 15

80 Series 8863 w/trim 1 15

20 Series 2828F 1 9

Closers

351 Series UO 4 34

281 Series O 2 24

1431 Series UO 4 32

1331 Series JUO 4 30

1130 Series RU 4 22

Overhead Holders & Stops

590/690 Series 1 6

1530/1540 Series 1 4

Screw Substitutions Price

Machine screw in place of wood screw No Extra Charge

Phillips head screws No Extra Charge

Spanner head in place of standard screws, specify WS or MS (37- prefix) See each product section for add

Six lobe security (Torx) screws (36- prefix) See each product section for add

Spanner Bit Kit - 82-3856 (sizes 4, 6, 8, 10, 12 & 1/4"), (1/4" Driver) $97.71 Each

Torx Bit Kit - 82-3855 (sizes T8, T9, T10, T15, T20, T25, & T27), (7/16" Driver) $150.32 Each


MASTER PREFIX LISTING



Master Prefix ListPrefix Series Used Description

1 7L, 10L, 7800, 7900, 8200, 470

3 8200, 9200

3P 8200

9 2408, 2900

10 6, 7, 8, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,9898, P800, 460, 470, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer.,88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

10UL 7800, 7900, 8200, 9200, 4870, 7000, 20, 30, 80, 8888, 90, 9898, P800, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

11 5500, 6, 7, 8, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80,8888, 90, 9898, 9800, P800, 460, 470, 480, 4870, 758, 858, Keyswitch, KP10,10LProfileSer., 10LRF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

12 20, 30, 83, MD84, MD86, WD86, SP-PP-PR86, LS-LP-LR-86, 87, NB87, SP-PP-PR87, 88, 8888, 89, 90, P800, 980, L980, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation, 5800, 7000, 2408, 2900

12HC 8700(all functions), 8800(04, 10, 13, 15), 980

13 GX, 6, 470, 7500

1331, 1431, 268, 269, 278, 281, 351, 421

14 5500, 6500, 6, 7, DL

GX, 7500

8700, 9700

15 5500, 6, GX, 470

16 20, 30, 80, P800, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

480

17 6

19 80, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

20 5500, 6500, 7500, 10, 460, 480, DL

21 6, 7, 8, 10, T-Zone, 5500, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80,8888, 90, 9898, P800 460, 470, 480, 4870, 758, 858, 4142, 4143, Keyswitch, KP10,10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88,88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

22 5500, 6500, 7500, 6, 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, 7000, 20, 30, 80,8888, 90, 9898, P800, 460, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer.,10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer.,88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

23 8, 10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation

6

7800, 8200, 9200, 8300, 8900, KP8200, 8200ProfileSer., 8200RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

24 6

114, 115


6

26 114, 115

1-1/16" wide front for 1-3/8" doors

Stainless Steel Hub

Triad Mortise Lock

Companion units to 12-2400, 12-2900 Fire Guards

SARGENT Signature Key System

SARGENT Signature Key System meeting UL437(mortise and rim cylinders only)

SARGENT XC Key System

UL Fire Label

Fire Guard with Smoke Detector

UL Fire Label/Hurricane Code

Lockset x Front & Strike with 1/4" Radius (2-3/8"Backset only)

Door Closer Body Only

Full Lip Strike #505

Full Lip Strike #506

Sliding Bolt Bottom Case

Drive-In Guarded Latchbolt (2-3/8" Backset Only)

Cylinder Lockdown Feature

400 "T" Shaped Strike (2-3/4" x 1-1/8")

Lockset x 2-3/4" Backset x 2-1/4" x 1" Front

Pushbar without Lexan Touchpad

2-3/8" Backset

SARGENT Lost Ball Construction Key System

SARGENT Split Key Construction Key System(existing systems only)

3-3/4" Backset

3-3/4" Backset x 2-1/4" x 1-1/8" Front

Flat 4-7/8" ANSI Strike

2-3/4" Backset x 2-1/4" x 1-1/8" Front

2-3/4" Backset

5" Backset

5" Backset x 2-1/4" x 1-1/8" Front

7" Backset






28 5500, 6500, 7500, 6, 7, 8, 10, T-Zone, DL, 114, 115, KP10, 10ProfileSer., 10RF-Actuation

GX

470, 480

4870

30 7, 10, T-Zone, 7500, KP10, 10ProfileSer., 10RF-Actuation

31 8, T-Zone, DL, 7800, 7900, 8200, 9200, 7000, 80, 90, 97, 98, 99, P800, Holders & Stops

36 Cylindrical, Mortise, Closers, 80, 97, 98, 99, P800, Exits, Holders & Stops, Aux.Locks, Deadlocks, 114, 115, 540, 550, 5100, 5800, 351EHT, 7000

37 Cylindrical, Mortise, Closers, 80, 97, 98, 99, P800, Exits, Aux. Locks, Deadlocks,114, 115, 540, 550, 5100, 5800, 7000


43 80

47 Cylinders

48 480

49 7800, 8200

50 7800, 8200

Cylinders

51 7800, 8200, 80, 97, 98, 99, 4870, 758, 858

52 7800, 8200, 80, 97, 98, 99, 4870, 758, 858

53 83, 84, MD84, 85, MD86, WD86, 87, NB87, PP/SP/PR8700, 88, 89 , 7000, P800

54 83, 84, MD84, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89, 97, 98, 99, 7000, P800

55 30, 80, P800

7000

56 80, P800

57 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89, P800

58 80, P800

59 83, 84, MD84, 85, MD86, WD86, 87, PP/SP/PR8700, 88, 89

BC59 83, 84, MD84, 85, MD86, WD86, 87, PP/SP/PR8700, 88, 89

60 6, 7, 8, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,P800, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation



65 6300, 7300B

6573 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480,4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

65737P 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480,4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

68 7900, 8200, 9200

ANSI A-115.2.1971 Curved Lip Strike (#808)

ANSI A-115.2.1971 Curved Lip Strike (#508)

ANSI A-115.2.1971 Flat Lip Strike (#408)

ANSI A-115.2.1971 Flat Lip Strike (#7710)

Lever to accept Schlage Cylinder-Cylinder is notprovided

Special Thickness Doors (Specify door thickness)

6-Lobe Security Head Screws

Spanner Head Screws

3/4" Throw Latchbolt x 2-3/4" Backset

Flush End Cap

Special Cams

488 Strike 3-5/8" x 1-1/4"

Visual Status Indicator/Occupancy Indicatorw/Emerg. Rlease

Secured Indicator Rose

Hotel Function (Lockout)

Old Style Removable Core Cylinders for Existing

Systems only

Old Style Removable Construction Core Cylindersfor Existing Systems only

Latchbolt Monitor Switch

Internal Microswitch in ET Control

Signal Switch in Rail

Monitor Inside Lever

Remote Dogging/Latch Retraction

Delayed Action (Magnet ordered separate)

Electric Dogging

Electroguard

Electroguard Boca Code (needs door status switch)

SARGENT Removable Disposable ConstructionCore

SARGENT Removable Core Cylinder

SARGENT Removable Construction Core Cylinder

Uncombinate Cores

Small Format Interchangeable 6-Pin UncombinateCore

Small Format Interchangeable 7-Pin UncombinateCore

Lock furnished w/lever handle outside x knob inside






69 7900, 8200, 9200

70 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,P800, 480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

72 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,P800, 480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

73 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, P800,480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

737P 7, 10, T-Zone, 6500, 7500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, P800,480, 4870, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

74 8, 10, 11, 7800, 8200, 4870, 114, 115

75 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation

6500, 7500

80, 94, 7000, P800

97, 98, 99

KP88

76 7, 8, 10, T-Zone, 7800, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation

6500, 7500

7900, 7000, 80, 97, 98, 99, P800, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

77 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,KP8200, 8200ProfileSer., 8200RF-Actuation

6500, 7500

80, 7000

97, 98, 99

78 Mortise Cylinder

80 2900

7L, 10L, T-Zone, 8L

81 8, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

F182 7L, 8, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, 856/857Padlocks, Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88,88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

82 7L, 8, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, 856/857Padlocks, Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88,88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

F183 8, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

83 8, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, KP8200, 8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

84 8, 7800, 7900, 8200, 7000, 80, 90, 9898, P800, 4870, Padlocks, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

Lock furnished w/lever handle inside x knob outside

Small Format Interchangeable Disposable PlasticConstruction Core

Small Format Interchangeable 6-Pin ConstructionCore

Small Format Interchangeable 6-Pin Core

Small Format Interchangeable 7-Pin Core

Lead Lining or Wrapping

Milled Inside Lever, Knurled Inside Knob

Handicap Warning on Inside of Lever – EmbossedPlastic backing

Abrasive Strip on Rail

Knurled Crossbar

Tactile Warning

Milled Outside Lever, Knurled Outside Knob

Handicap Warning on Outside of Lever – Embossed Plastic backing

Milled Outside Lever

Milled Both Levers, Knurled Both Levers

Handicap Warning on Both Levers – EmbossedPlastic backing

Abrasive Strip on Rail, Abrasive Coating on Lever

Knurled Crossbar, Abrasive Coating on Lever

Exposed Barrel

Adjustable Hold Open Switch

Levers/Knobs to accept Keso and KesoF1 cylinders- no cylinders provided

Cylinder to accept Keso(83) and KesoF1(F183)removable core - no core provided

SARGENT KESO Security Cylinder - Patented -NEW Key Systems

SARGENT KESO Security Cylinder (ExistingSystems only)

SARGENT KESO Security Removable CoreCylinder - Patented - NEW Key Systems

SARGENT KESO Security Removable CoreCylinder (Existing Systems only)

SARGENT KESO Security RemovableConstruction Core Cylinder






91 550, 5100, 5800, 10ProfileSer., 8200ProfileSer., 88ProfileSer., 89ProfileSer.

92 550, 5100, 5800

93 550, 5100, 5800

94 550, 5100, 5800

AL 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89, P800

AL93 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89

AV 7800, 8200, 9200

BP 7800, 8200

BR 6, 7, 8, 9, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,9898, 9800, 980 Mullions, P800, 460, 470, 480, 4870 540, 550, 5100, 5800, KP10,ProfileSer., 10LRF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88,88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

CL 4000Ser.

DM 10LProfile(G1.5), 8200 Profile(G1.5), 80Series Profile(G1.5)

DX 7800, 8200

F1 KESO Cylinders/Keys

FM 8700 (E, F Rail only)

FW 7, 10

G1 10LProfileSer., 10LRF-Actuation, 8200ProfileSer., 8200RF-Actuation,88/89ProfileSer., 88/89RF-Actuation,

GL 8500, 8800, 8888, P800

HC 8700 (all functions), 8800 (04, 10, 13, 15), 980

IS 7800, 8200

LB 7900, 8200

LX 8200

M 9200

N1 10L Profile Series, 8200 Profile Series, 88/89 Profile Series

NB 7000, 8400, 12-MD8400, MD8600, WD8600, 8700, 306, 313 Aux Controls

OS 7800, 8200

PL 80

RX 10, 7900, 8200

SC 6, 5500, 6500, 7500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90,P800, 470, 480, 4870, 758, 858, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

SE 6, 6500, 7500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90, P800,470, 480, 4870, 758, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer.,8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

SF 7L, 10L

SG 6, 7, 8, 9,10, T-Zone, 7800, 8200, 9200, 1431, 281, 421, 351, 80, 90, O/H Holders &Stops, 4870, 114/115, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

SL T-Zone

SR 1431, 268, 269, 278, 281, 421, 351 series

TA Hinges

TL 80

8200 x WT(escutcheon)

Remote Power

Remote Monitoring

Continuous Alarm

Automatic Re-Arm

Alarmed (not available with 56 thru 59 prefixes)

Alarmed, with continuous alarm (not available with56 thru 59 prefixes)

Anti-Vandal Pull Trim

Distributor Bulk Pack Program - Lockbodies

SARGENT Bump Resistant Cylinder

Low Ceiling

Forced/Propped Door Harness

Deadbolt Monitoring

Patented Keso Key System

2Pt. Latching, Complies with FEMA 361

Freewheeling

v.G1 Next Generation software

Guarded Latch

Hurricane Code

Inside Working Trim Sets

ADA Extra Large Thumbturn

Latchbolt Monitor

SARGENT V-10 Mogul Cylinder

Open Architecture WIEGAND™ Interface

No Bottom Rod

Outside Working Trim Sets

SARGuide™ Photoluminescent Coating

Request to exit or enter switch

Schlage "C" Keyway Cylinder - "0" Bitted

Schlage "E" Keyway Cylinder - "0" Bitted

Lever to accept Medeco Keymark & Schlage LargeFormat Interchangeable Core – No core provided

MicroShield™ - an antimicrobial powdercoat finish

High Security Lever Attachment

Corrosion Protection - Additional Special RustInhibitor (SRI)

McKinney Hinges

SARGuide™ - Illuminated Touchpad

SARGuide™ - Illuminated WT Escutcheon






TR 7800, 8200

UL GX (3L)

VA 6, 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, 7000, 80, 8888, 90, P800, 4870,Padlocks, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

VC T-Zone, 7800, 7900, 8200, 9200, 7000, 80, 8888, 90, P800, 4870, Keyswitch,KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation

VS 6, 7, 8, 10, T-Zone, 7800, 7900, 8200, 9200, 7000, 80, 8888, 90, P800, 4870,Padlocks, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,89ProfileSer., 89RF-Actuation

VCVS T-Zone, 7800, 7900, 8200, 9200, 7000, 80, 8888, 90, P800, 4870, Keyswitch,KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,KP89, 89ProfileSer., 89RF-Actuation

WS 88, 89

Distributor Bulk Pack Program - Complete TrimPacks

3-HR UL Latch

SARGENT V-10 Standard Cylinder

SARGENT V-10 Interchangeable Core Cylinder

SARGENT V-10 Standard Cylinder - Unassembled

SARGENT V-10 Interchangeable Core Cylinder -Unassembled

Windstorm Certified


PARTNER SERVICES GENERAL INFORMATION



Business Hours: The Partner Services Team is available 8:00 AM to 4:30 PM Eastern Standard Time.

Toll Free Telephone Number: 1-800-727-5477

Order Fax Number: 1- 800-906-6606.

Contact Phone Numbers: Included is a list of Who’s Who for the Partner Services Team. Thislist includes Team Member’s direct extensions and email addresses.

Calendar: SARGENT observes the following Holidays:

• January 1 (New Years)

• January 21 (Martin Luther King Day)

• February 18 (President’s Day)

• March 21 (Good Friday)

• May 26 (Memorial Day)

• July 4 (4th of July)

• September 1 (Labor Day)

• October 13 (Columbus Day)

• November 27 and 28 (Thanksgiving)

• December 24, 25 and 26 (Christmas)

SARGENT Website: We offer a full service website www.sargentlock.com. The Partner Servicespage of the SARGENT website includes templates, instruction sheets, configurable cut sheets,wiring diagrams and our latest product developments. All product information catalogs are alsoavailable on this website.

On-Line Order Information: The Partner Services page of the SARGENT website (www.sargentlock.com) offers order information. Distributors can verify the status of an order, as well as obtain shipping information.

To obtain a password to access this information, please email: [email protected].

RGA Policy: Please refer to GI-4 of the General Information Section.


WHO’S WHO AT SARGENT



PARTNER SERVICES TEAMManager of Customer Relations – Order processing, Customer Service, Key SystemsLynn Higgins 1-5948 [email protected]

Order Processing – Edit/Enter OrdersFax Orders To: 800-906-6606

Manager of Order ProcessingMike Murray – Supervisor 1-5538 [email protected]

Angel Delmonico 1-5569 [email protected] Thompson 1-5568 [email protected] Wichowski 1-5693 [email protected] Avery 1-5537 [email protected] Froehlich 1-5767 [email protected] DeJesus 1-5927 [email protected]

Order Entry Quality Control SpecialistMary Nazario 1-5754 [email protected]

Account ServicesDeb Bethea 1-5565 [email protected]

Customer Service Team MembersExpedites, Returns, Change Orders, Line Suspensions

Customer Service’s Fax: 888-863-5054

SUPERVISOR OF STRATEGIC ACCOUNTSLennie Makosky 1-5581 [email protected] Muzyk 1-6852 [email protected]

SUPERVISOR OF CUSTOMER SERVICESusanna Bria 1-5584 [email protected]

ORDER COORDINATOR – ( Order Changes, Line Suspensions)Timothy Ivers 1-6848 [email protected]

Customer Support Specialists– ( Returns, Expedites, Product Questions)

SOUTH WESTBrie Cifaldi: (A37, A38, A39) 1-5566 [email protected]

NORTH EAST REGIONSJennifer Griglun: (A01, A02, A03) 1-5530 [email protected]

NORTH WEST REGIONSShirley Sotaski: (A43) & (A44) 1-5715 [email protected] Cusson: (A45) 1-5561 [email protected]

Telephone: 800-727-5477 • Fax Orders To: 800-906-6606





Customer Support Specialists (Continued)

SOUTH CENTRAL REGIONKarolina Potochney: (A26 & A28) 1-5713 [email protected] Cifaldi: (A27)) 1-5566 [email protected]

SOUTH EAST REGIONSusan Alpert: (A13, A14, A15, A25) 1-5541 [email protected]

MID ATLANTIC REGIONChetah Cusson: (A07 & A08) 1-5861 [email protected]

NORTH CENTRAL REGIONMaria Hanley: (A31, A32, A33) 1-5759 [email protected]

MID WEST AND REGIONJoann Sierejko: (A20, A21, A22) 1-5755 [email protected]

CANADA / INTERNATIONAL COMPANIES Luci Muzyk 1-6852 [email protected]

CUSTOMER EXCEPTIONS:Joann Sierejko: All AkronShirley Sotaski: All General Supply, Cleveland Vicon, Tru-Fit & Piper – WeatherfordChetah Cusson: Himmels Hardware & Island PacificMaria Hanley: Dugmore & Duncan

KEY SYSTEMS TEAMMaster Key System’s Support Fax: 888-898-8995

KEY DESIGN TEAM

MANAGER OF KEY SYSTEMS & CYLINDERS STRATEGIC DEVELOPMENTDavid Steele 1-5518 [email protected] OF KEY SYSTEMS DESIGNEvaldas Malinauskas 1-5955 [email protected]

Frank Gatter – Signature, V-10 1-5786 [email protected] Mursko – Conventional, Keso, Non, 24-Hour 1-5558 [email protected] Sakalauskas – Keso, V10 1-5625 [email protected] Jovaisa – Conventional, Best 1-5722 [email protected] Dautaj – Canada Orders, 1-5746 [email protected] V-10, Bitting Lists

MARKETINGMANAGER OF MARKETING COMMUNICATIONSLinda Dean 1-5596 [email protected] OF DESIGNER HARDWARESandra Matheny 1-6889 [email protected]

MARKETING ASSISTANTEmily Charles 1-5682 [email protected] PRODUCT SPECIALISTRussell Corriveau 1-5659 [email protected] COORDINATORAlison Marquis 1-6879 [email protected]







BRAND PROMOTIONSMANAGER OF SARGENT BRAND PROMOTIONSTom Mayer (708) 403-5288 [email protected]

SALES SUPPORT SERVICES TEAMSales Support / Quote Request’s Fax: 203-821-5729

MANAGER OF SALES SUPPORT SERVICESRich Hodder 1-5583 [email protected]

Roberta Gogliettino 1-5570 [email protected] Shanley 1-6823 [email protected] Panagoulias 1-5575 [email protected] Le 1-5721 [email protected]

TECHNICAL APPLICATIONS TEAMCALL: 800-810-WIRE (9473) FOR ELECTRICAL TECHNICAL ASSISTANCE

Electrical Specialist’s Fax: 203-603-5981ELECTRICAL SPECIALISTSRobert Anielak, Technician 800-810-WIRE (Option 1) [email protected] Nemorin, Engineer 800-810-WIRE (Option 5) [email protected] Tonon, Engineer 800-810-WIRE (Option 5) [email protected] Gyurco, Technician 800-810-WIRE (Option 1) [email protected] Gardner, Technician 800-810-WIRE (Option 1) [email protected] Jacques, Engineer & Technical 800-810-WIRE (Option 5) [email protected]

Support Team Leader

EXIT DEVICE SPECIALIST FAX: 203-603-5985Main Contact: Gloria Dennis 1-5501 [email protected] Up: Katina Boulais 1-5726 [email protected]

MORTISE LOCK SPECIALIST FAX: 203-498-5567Main Contact: Robin Donnelly 1-5740 [email protected]

CYLINDERS SPECIALIST FAX: 203-603-5921Main Contact: Rob Shanley 1-5931 [email protected] Up: Al Viola 1-5586 [email protected]

DOOR CLOSER SPECIALIST FAX: 203-821-5793 Main Contact: Paul Lichack 1-5534 [email protected] Up: Glenn Freiman 1-5516 [email protected]

BORED LOCK SPECIALIST FAX: 203-821-5768Main Contact: Ralph DiMaio 1-5637 [email protected]


ORDERING TIPS



Order Types:• Please submit TURBOSHIP orders, Standard lead time(contract) orders, SPECIAL product

orders on separate order forms (Pages GI-23 – GI-28).

• Please use TURBOSHIP order forms for all TURBOSHIP orders. If you use your own purchaseorder forms, please supply the information in the proper SARGENT nomenclature, for your order tobe processed without delay. Only products listed in the current TURBOSHIP brochure are availablefor TURBOSHIP. Products ordered that are not listed in the current TURBOSHIP brochure willautomatically be entered at standard factory production lead times.

• Standard Order Forms are included in the 2007 Price Book and at www.sargentlock.com(Pages GI-23 – GI-28).

• TURBO SHIP ORDER FORMS are available on our website at www.sargentlock.com/turboship.html

• We recommend using Order Forms included with this Price Book when placing purchase orders forSARGENT products. The Order Form is available for copying prior to placing your order.

Orders with Quotes:• If you have a Quote, please include a copy with the purchase order or reference the Quote number

on PAGE 1 of your order. Orders without this information may be delayed or may be subject to a$75.00 price correction fee if invoiced incorrectly due to this missing information

• If you have a Quote, please check the expiration date. If the Quote is expired, please contact yourDSS Sales rep. to find out how your quote can be re-instated. Orders received with expired Quotesmay be delayed.

• If you have a Quote, please check products listed and packaging on the quote. Orders which do notmatch the products listed on your Quote or do not include all products listed on the Quote and do nothave packaging (sister company order) information, may be delayed.


ORDERING TIPS



Keying - Authorization Documentation:When submitting purchase orders to SARGENT for processing, please remember that certain cylindertypes and/or keyways require additional authorization documentation before the order can be entered.

Purchase orders will be held and questioned if the following keyway/cylinder types do not have the properauthorization documentation submitted with each purchase order:

• Restricted keyway authorization (new restricted keyways must be pre-approved by SARGENT)• KESO and KESO F1 authorization form(Pages GI-30 – GI-32)• Signature code pattern registration form or for existing systems a PIN code or letter of auth (GI-29)• V-10 End user contract or letter of authorization• Key Wizard Registration Form (GI-33)

Shipment of the following items will be made directly to the end user or their designated agent:• Any and all cut keys related to any SARGENT master key system regardless of keyway;• All Restricted Keyway Cut Keys or Key Blanks;• All Signature Cut Keys or Key Blanks;• All V10 Cut Keys or key Blanks;• All XC Restricted Cut Keys or Key Blanks;• All dimpled KESO keys;• All computer disks (CD or Floppy) for the Key Wizard Control Software and• All key system bitting information in either paper or electronic form

Exceptions: • Standard key blanks for the “C”, “H”, “L” and “R” keyway families• XC key blanks(only) for any non-restricted keyway family

Any order or fax request received at SARGENT for any of the above products or information must specifythe shipping address of that product or information as the end user of the product or information. If theproduct is to be shipped to the end user’s authorized agent, a letter authorizing that shipment to an addressdifferent than that of the end user must be on file at SARGENT or attached to the order.

If you have any questions regarding authorization, please do not hesitate to contact us or your local representative.


ORDERING TIPS



Purchase Order FormatFor Comsense and Protech users please use the Purchase Order Supporting (Detail) Schedule to placecontract orders, NOT the Door Index or Keying Index. Only the Purchase Order Supporting Schedule con-tains all of the information required, (prefixes, item quantities) to properly furnish you materials.

For all other formats we ask that product of like nature be grouped together with the item quantities, DoorNumbers, and keysets listed underneath or with the product. This will allow faster processing of yourorder.

Ordering Checklist:Before placing your order, check for the following:

3 Purchase order on company letterhead

3 Purchase order is legible

3 Purchase Order Number

3 Account Number

3 Ship To Address

3 Contact Person for additional information requirements

3 Pricing requirements – Buying Program or Quote

3 TURBOSHIP order - TURBOSHIP order form OR clearly mark on your order form

3 Contract Order (Keyed Lead Sheets attached)

3 Authorization Letter OR Pin # (if applicable)

3 Registry Number if Existing Key System or previous SARGENT order number

3 Job Name

3 Quantity

3 Catalog Function

3 Options/Prefixes (if applicable)

3 Trim/Arm

3 Finish (if applicable)

3 Handing (if applicable)

3 Backset & Strike (if applicable)

3 Door thickness (if applicable)

3 Door width & height – Exit Devices

3 Voltage (if applicable)

3 Keysets (if applicable)

3 Door numbers (if applicable)

GI-23





GI-24



GI-25



GI-26



GI-27



GI-28



GI-29



GI-30



GI-31



GI-32



GI-33

CYLINDERS & KEYING

TABLE OF CONTENTS



CYLINDERS AND KEYING

How to Order/Key Control System Types.................................CK-1

Keying Prefixes.........................................................................CK-2

Keying Charges........................................................................CK-3

Key Charts/Key Wizard Software .............................................CK-4

Mortise & Rim Cylinders ..........................................................CK-5

Cylinders & Accessories ..........................................................CK-6

Bored Lock Cylinder & Parts....................................................CK-7

XC Series .................................................................................CK-8

XC Series .................................................................................CK-9

6300 Removable Core Cylinders & Old Style Removable Core Cylinders.....................................CK-10

Small Format Interchangeable Core ......................................CK-11

XC - Small Format Interchangeable Core..............................CK-12

Keying Kits, Tools, Gauges, Components ..............................CK-13

Keyblanks ...............................................................................CK-14

Keyblanks ...............................................................................CK-15

SARGENT Cut Keys/Competitor Keyways.............................CK-16

KESO F1 Security System Prefixes.......................................CK-17

KESO F1 Security System Cylinders.....................................CK-18

KESO F1 Security System Cylinders/Padlocks .....................CK-19

KESO F1 Security System UL LIsted Cylinders/Cam/Padlocks ........................................................CK-20

KESO F1 Security System Cylinders Guarantee...................CK-21

KESO Security System Prefixes ............................................CK-22

KESO Security System Cylinders ..........................................CK-23

KESO Security System Cylinders/Padlocks...........................CK-24

KESO Security System UL Listed Cylinders/Cams/Padlocks.......................................................CK-25

KESO Security Systems Cylinders Guarantee ......................CK-26

Signature Series Cylinders & Keying .....................................CK-27

Signature Series Removable Core.........................................CK-28

Signature Series Mortise & Rim Cylinders ............................CK-29

Signature Series Bored Lock Cylinders & Parts ....................CK-30

SARGENT V-10 Series Cylinders & Keying...........................CK-31

SARGENT V-10 Mortise, Rim, Bored Lock Cylinders............CK-32

SARGENT V-10 Mortise, Rim, Bored Lock, Removable Core Cylinders ....................................................CK-33

SARGENT V-10 Padlocks & Parts .........................................CK-34

SARGENT V-10 IC Pins & Miscellaneous Parts ....................CK-35

SARGENT V-10 Cylinder Plug, Body, Cams..........................CK-36

SARGENT V-10 Miscellaneous Parts, Key Machine..............CK-37

CK-1CYLINDERS & KEYING



How to Order

Step Description ExampleQuantity Each 1 EaPrefix Consult catalog for prefixes available 1 Ea. 63-Product Series Consult catalog for applicable product 1 Ea. 63-8205 LNLFinish Consult catalog for finishes available 1 Ea. 63-8205 LNL US26DKeying DHI keying nomenclature 1 Ea. 63-8205 LNL US26D AA1To establish a new factory master key system or to add to an existing factory master key system please use the NEW ORDERING INFORMATION LEAD SHEET.

For all master keyed systems of a level 5 or above, please consult factory before ordering for information on how to order.

Key Control System TypesType Description Prefix

Stock (LA) Keyway used for stock orders (when factory master keying is not required) -

Standard Keyways in general use for key systems. -

Restricted Keyways tightly controlled by the factory, letter of authorization required from -(Not Published) end user for keys & cylinders, and prior approval from the SARGENT Security

Systems Manager before establishing a new system.

Removable Core System allows for increased security through quick changing of cylinder into 63(R Series Standard- reserve or into another lock. System can be used with mortise locks, bored locks, 64 Construction Core

for New Systems) auxiliary deadlocks, padlocks and exit devices.

Small Format System allows for increased security through quick changing of core into cylinder 72 Construction

Interchangeable housing or into another lock. System can be used with mortise locks, bored locks, 73 (6-Pin)

Core auxiliary locks, and exit devices. Available in SARGENT 4A & 4B keyway family & 73-7P (7-Pin)

existing competitor keyway families.

XC Patented product that cannot be copied and supplied by others. Provides an 11intermediate level of control by ensuring that the keyblanks are not readily available in the market. Offered in many of SARGENT's standard keyways and is readily integrated as a cost effective means of achieving higher security key control in an existing key system. Available in SARGENT standard or 7 Pin Small Format (4A and restricted keyway 4B) Interchangeable Core cylinders.

Signature Signature codes tightly controlled by the factory. Pin # or explicit letter of 10authorization required from the end user for keys & cylinders. New code assignments require form H759 “Code Pattern Registration Form” to establishSignature Code and keyway assignments. Available with construction keyingand removable core options (as additions). When Signature and Standard keys are used on the same system, miscellaneous charges and substitution pricesthat apply to Signature will apply to Standard.

KESO KESO codes tightly controlled by the factory. End users signature required for keys 82& cylinders. Please contact factory for approval BEFORE establishing any new 83 Removable Core

KESO system. All keying and key cutting performed in a factory secure area. 84 Construction Core

KESO F1 KESO F1 Series of cylinders incorporates the same time proven KESO product line F1-82and includes advanced Patented features. These features to both cylinder and F1-83 Rem. Core

key are designed to be used in new Patented cylinders and are compatible 84 Construction Core

with existing KESO key systems. KESO F1 codes tightly controlled by the factory.End users signature required for keys & cylinders. All keying and key cutting performed in a factory secure area.

V-10 V-10 codes tightly controlled by factory. End user restricted key section agreement VAmust be completed and signed prior to establishing a new system. All subsequent VCorders require a letter of authorization. System can be used with mortise locks, VSbored locks, deadbolts, padlocks and exit devices. System is also available for VCVScompetitors cylinders. V-10 cylinder orders require separate purchase order and are delivered as stand alone products. Not available construction keyed.

Bump Resistant Patent Pending bump resistant cylinders. These cylinders employ especially engineered BRpatent pending pinning components designed to resist bumping while maintaining the cylinder's strength. Not available with 10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes.



CK-2CYLINDER & KEYING

-

Keying Prefixes

Prefix Description ADD Per Cylinder

Note: Not all prefixes are available for all product lines. Consult product catalog for prefix offeringsavailable. Prefixes are adds to a product and cannot be ordered separately.10 SARGENT Signature Key System (Refer to CK-27 thru CK-30 for more info) $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders ONLY), (Refer to CK-29) $48.00 / cyl.11 SARGENT XC Key System (refer to CK-8 & CK-9 for more information) No Add 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See Below 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21 SARGENT Construction Key System (lost ball) Standard on new systems est. since 5/1/96 $10.00 / cyl.22 Construction Key System (split key) To be used on pre-established split key systems only $10.00 / cyl.50 Hotel function SARGENT mortise cylinder (7800, 8200 only)

– Consult Factory for System Compatibility $21.00 cyl.51 SARGENT OLD STYLE permanent core for existing old style systems only (Refer to CK-10) $44.00 / cyl.52 SARGENT OLD STYLE construction core for existing old style systems only (Refer to CK-10) See Below 60 SARGENT removable disposable construction core (Refer to CK-10) No Add 63 SARGENT 6-Pin removable core cylinder, includes master keying charges $44.00 / cyl.

(For hotel function use additional prefix 50-, for mortise cylinders only), (Refer to CK-10)64 SARGENT construction removable core cylinder (brass core) See Below 6573 Small Format 6-Pin Uncombinated Core (Refer to CK-11) $31.00 / cyl.65737P Small Format 7-Pin Uncombinated Core (Refer to CK-11) $31.00 / cyl.70 Small Format interchangeable disposable construction core (Refer to CK-11) No Add 72 Small Format interchangeable 6-Pin construction core See Below 73 Small Format interchangeable core 6-pin (refer to CK-11 for available keyways)

Includes MK and GMK keying charges $40.00 / cyl.737P Small Format interchangeable core 7-pin (refer to CK-11 for available keyways)

Includes MK and GMK keying charges $40.00 / cyl.F182 SARGENT Patented KESO Security Cylinder key system (Refer to CK-17 thru CK-21) $47.00 / cyl.F183 SARGENT Patented KESO Security Cylinder removable core key system (Refer to CK-17 thru CK-21) $67.00 / cyl.80 Levers or Knobs to accept KESO and KESO F1 cylinders – no cylinders provided No Add 81 Mortise or Rim cylinder to accept KESO (83) and KESO (F183) removable core – no core provided No Add 82 SARGENT KESO Security Cylinder key system (Refer to CK-22 thru CK-25) $47.00 / cyl.83 SARGENT KESO Security Cylinder removable core key system (Refer to CK-22 thru CK-25) $67.00 / cyl.84 SARGENT KESO Security Cylinder construction removable core system See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage “C” keyway cylinder 0- bitted only (Avail. only in listed finishes) No Add SE Schlage “E” keyway cylinder 0- bitted only (Avail. only in listed finishes) No Add VA SARGENT ASSA V-10 standard cylinder – keyed See V-10 Section CK-31 thru CK-37VC SARGENT ASSA V-10 Interchangeable core – keyed See V-10 Section CK-31 thru CK-37VS SARGENT ASSA V-10 Standard cylinder sub assembled – less side bar See V-10 Section CK-31 thru CK-37VCVS SARGENT ASSA V-10 Interchangeable core sub assembled – less side bar See V-10 Section CK-31 thru CK-37

OLD STYLE REMOVABLE TEMPORARY CONSTRUCTION CORES

(52-) The customer will be invoiced at $22.00 NET/NET per construction core and the full invoice must be paid according to SARGENT’sstandard terms. No further discount will be applied. When construction cores are to be returned, the distributor must contact CustomerService for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $22.00 credit for each constructioncore returned from the specified project.

REMOVABLE/INTERCHANGEABLE TEMPORARY CONSTRUCTION CORE

(64- and 72-) The customer will be invoiced at $20.00 NET/NET per brass core and the full invoice must be paid according to SARGENT’s standard terms. No further discount will be applied. The brass construction cores, 6-construction day keys, and 1-control key will be packed together and will ship with the order, unless otherwise specified. When brass construction cores are to be returned, the distributor must contact Customer Service for an RGA. Once the brass construction cores are returned to SARGENT, SARGENT will issue a $20.00 credit for each brass construction core returned from the specified project.

6272 – Construction Removable Core Control Key (64-) $7.00 each

6277 – Construction Removable Core Day Key (64-) $7.00 each




KEYING CHARGES

Keying Charges & Substitutions Price

*Masterkeying or Higher level of keying, any quantity Add $10.00/cyl.Masterkeying or Higher level of keying, any quantity, cylinders only Add 10.00/cyl.*Construction Masterkeying with lockset or exit devices (21-, 22-) Add 10.00/cyl.Construction Masterkeying with cylinders only (21-, 22-) Add 10.00/cyl.Omitting cylinder from lockset or exit device

For omission of mortise cylinder Deduct 53.00/cyl.For omission of rim cylinder Deduct 53.00/cyl.For omission of T-Zone (11), 10, 9, 8, 7, 6, 6500, 7500, 480 Line cylinders Deduct 51.00/cyl.For omission of 460, 470, 5500 Line cylinders Deduct 0.00/cyl.

*Double cylinder functions - double above charges when purchased with locksets or exit devicesExtra Keys (Cylinders are packed standard with 2 keys each)For each extra key ordered with locksets, exit devices or cylinders Add 2.00/keyFor keys packed separately (Indicate appropriate "ship to" address on keying cover sheet) Add 3.00/cyl.Key MarkingStamping letters or numerals on key bow - add per each letter or numeral Add 1.00/num“Do Not Duplicate” or other stamps on file at SARGENT No AdditionWhere new special stamp is required e.g., “State of Alaska - Do Not Duplicate” Add 500.00/dieKeys stamped from this special die on first only Add 2.00/keyVisual Key ControlStamping of bitting numbers on Change/Day keys standard N/CStamping of keyset number and file number on Master keys standard N/CStamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol Add 5.00/cyl.Each additional key Add 1.00/keyConcealed stamping code (Keyset Symbol) on mortise or rim cylinder body only Add 3.00/cyl.Concealed stamping of 6300/10-6300 and old style Cores slide Add 3.00/cylNote: Not available with V-10 and XC plugs/bodies or signature plugsDelete SARGENT Logo/Key SectionTo delete SARGENT Logo and Key Section from Keys – N/A for IC, XC, KESO, or V-10 Keyblanks Add 1.00/keyTo delete SARGENT Logo from SARGENT Mortise & Rim Cylinders – N/A w/V-10 Cylinders Add 1.00/cyl.SARGENT Restricted Keyway Family (A, B, G, K, N, V) 6 Pin, (4B) Small Format Interchangeable Core 7PinLocksets, cylinders and cores with restricted sections Add 6.00/cyl.Cylinder barrels for restricted keyways Add 6.00/bar.

NOTES: All orders for restricted keyblanks, barrels, or product containing cylinders that have a restricted keyway mustinclude a letter of authorization or a copy of purchase order from the end user. Prior authorization from SARGENT key systems is required before establishing a new key system that requires a restricted keyway.

Two (2) cut change keys are provided per lockset or cylinder at no charge. Keyblanks cannot be substituted for cut keys.

Note: The below applies to Standard Key Systems.For XC Series refer to CK-8.For Small Format Interchangeable Core refer to CK-11For Small Format XC Interchangeable Core refer to CK-12For KESO F1 refer to page CK-17.For KESO refer to page CK-22.For Signature refer to page CK-27.For SARGENT V-10 refer to page CK-31.

SARGENT keyed orders should include Keying Lead Sheet




KEY CHARTS/KEY WIZARD

KeychartsCatalog # Description Price

KC1 Paper - Bittings 1-50 $140.00






KC7 Paper - Bittings Over 9000 Consult Factory

KCD1 Disc - Bittings 1-50 $140.00






KCD7 Disc - Bittings Over 9000 Consult Factory

Note: These prices are for a hierarchial Master Key system with no cross-keying of selected keys.

For special requirements or for systems prior to 1997, consult factory for a quote.

An owner's letter of authorzation must be attached to all purchase orders for additions to existing systems.

There is no charge for keycharts ordered with corresponding factory keyed hardware order.

When ordered separate from hardware order, keycharts will be billed at 50% off of list price.

No further discounts will apply.

Key Wizard SoftwareCatalog # Description Price

KW-SS1 Single license version $825.00

KW-SSN1 Network version $995.00

KW-DEMO1 Demonstration version $25.00

DLKW1 Keywizard floppy disk for downloading your new masterkey system; when ordered with hardware $400.00

DLKW2 Keywizard floppy disk for downloading you existing masterkey systems** $800.00

UP-KW-SSN1 Keywizard upgrade from Single Site Version to Network Version** $500.00

** Please consult factory for the availability of existing systems for use with Key Wizard products.

Note: First year of maintenance and technical support is included on ALL Key Wizard products

See catalog for system requirements

Registration form required prior to order acceptance

Key Wizard Software will be billed at 50% off of list price; no further discounts will apply.




MORTISE & RIM CYLINDERS

Rim & Mortise Cylinder Numbers Specify Finish/Price34 (Rim), 41, 42, 43, 44, 46 (Mortise) – Includes #97 Rosette as Standard $53.00

48, 50, 52, 54, 56 – Includes #97 Rosette as Standard $78.00

Mortise Cylinders with following Cam No.13-0512* Adams Rite (1850)

13-0513* Adams Rite (4050, 4150, 4250, 4350, 4070)

13-0665 Short Cams I/S 78/82 (16 & 92) functions Add $5.31

13-0938* Schlage L

13-0921* Corbin/Russwin cloverleaf/4370 Key Switch

13-0097 Wide Straight Cam Add $5.31

*For removable core cams, see CK-7.

Hotel Type Mortise Cylinders – Consult Factory for existing system compatibility Specify Finish/Price50-42, 50-43, 50-44 Hotel Cylinder (7800, 8200 only) $74.00

Mortise Cylinders, Exposed Barrel Only Specify Finish/Price78-41 Thru 78-43 (only available in Std, 10-, 21-, and 22- prefixes) $74.00

Mortise Cylinder Plugs 6-Pin US4 & 15 Finish

Plug No. Cylinder Size Price

13-0401 41

13-0402 42

13-0403 43 $21.46

13-0404 44

13-0405 46

13-0406 48

13-0407 50

13-0408 52 $32.19

13-0409 54

13-0474 56

Mortise Cylinder Bodies w/slide Specify Finish

Cyl. Body No. Cylinder Size Price

13-2005 41

13-2006 42

13-2007 43 $31.86

13-2008 44

13-2009 46

13-2010 48

13-2011 50

13-2012 52 $45.93

13-2013 54

13-2382 56

Slide Only – for Mortise & Rim Cylinders

13-0779 6-Pin $0.29

13-0780 7-Pin $0.36

Mortise Cams

Part # Minimum Quantity 25 ea. Price

13-0097 – misc. wide straight

13-0662 – for 22- 6 pin cylinders $2.81

13-0664 – standard

13-0663 – for 22-, I/S 78/82 (16 & 92) functions

13-0665 – Short Cam – I/S 78/82 (16 & 92) Functions

*13-0512 Adams Rite (1850, 4700)

*13-0513 Adams Rite (4050) $5.30 13-0921 4370 Key switch

13-2045 Hotel (50 function only)

*13-0938 Schlage L

01-1121 Cam Screws $0.19

Rim Cylinder Parts (34 Series) Specify Finish

13-0090 6 Pin Cylinder Plug $21.46

13-0587 7 Pin Cylinder Plug $21.46

13-2069 6 Pin Cylinder Body & Slide $31.86

13-2712 7 Pin Cylinder Body & Slide $31.86

13-0074 Connecting Screws 2-1/8" $0.48

13-0080 Plug Retainer $1.11

13-0085 Connecting Bar 2-1/2" $1.11

13-0086 Cylinder Back Plate $1.62

13-0075 Connecting Screws 2-3/4" $1.22

*See CK-7 for removable core cams.

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D, finishes.Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

Note: 6-Pin standard; 7-Pin available in #34 and size 42 and larger. Specify “7-Pin” for 1-Bitted product.




CYLINDERS & ACCESSORIES

Cylinder Rings Price Per 100 Pieces

Number 3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

90 1/16", 1/8", 3/16", 1/4", 3/8" (Blocking Rings) $5.24

97 9/32" (Rosette) – standard for cylinders ordered w/o hardware $5.24

Cylinder Rosettes Price Per Each Piece

Number 3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

1KA Cylinder Rosettes $27.70

1KB Cylinder Rosettes – 5/16" Projection $10.84

1KB-2 Cylinder Rosettes – 7/16" Projection $10.84

1KB-3 Cylinder Rosettes – 9/16" Projection $10.84

Cylinder Turn Knobs Specify Finish

Number 4, 10B, 26D0

124-41 thru Size 46 Sizes 41-46 standard cam

124-41-3 thru Size 46-3 Sizes 41-46 inside cylinder for 78/82 (16 & 92) functions

124-41-101 thru Size 46-101 Sizes 41-46 for #1850 Adams Rite Lock $74.00

124-41-104 thru Size 46-104 Sizes 41-46 for 4050, 4070, 4150, 4250, 4350 Adams Rite Locks

Mail Box Cylinder Finishes

Number 04, 15

4101 $66.00

01-4169 Cam Screw (2 required per cylinder) $0.41

13-0525 4101 Plug $21.46

13-0527 Cam $1.61

06-0166 Retaining Ring $1.47

Note: U.S. Postal regulations DO NOT allow masterkeyed Mail Box Cylinders.Available Keyed Different ONLY.



BORED LOCK CYLINDERS & PARTS



T-Zone (11-Line) 10L, 6500L, 7L Cylinder Assemblies and Components Part# Description Price

13-4145 Cyl. Assy (11L) (except 50 function) $51.00

11-2261 Cyl. Assy (11L)-50 function $76.00

13-3266 Cyl. Assy (10L, 7L, 6500) $51.00

13-3492 Cyl. Assy (10L)-50 function $76.00

13-3257 Body & Slide Assy. (11, 10, 7, 6500) $29.50

13-3142 Cyl. Plug & Ring Assy. (11, 10, 7, 6500) $21.46

11-0231 Cyl. tailpiece for VC 11 line $1.50

05-0017 Plastic Cyl. Support Ring (6500) $0.32

05-0028 Cyl. Retainer Lever (8500) $0.59

05-0033 Cyl. Tailpiece 6-Pin (IC & RC - 6500) $1.50

05-0034 Cyl. Tailpiece 7-Pin (IC & RC - 6500) $1.50

05-0040 Cyl. Tailpiece-6500 7-Pin XC $1.50

10-0019 Plastic Cyl. Support Ring (10L) $0.52

10-0239 Cyl. Tailpiece 6-Pin (IC & RC - 10L, 7L)

Except 54 Function $1.50

10-0240 Cyl. Tailpiece 7-Pin (IC-10L, 7L)

Except 54 Function $1.50

10-0286 Cyl. Tailpiece 6-Pin (54 function 10L, 7L) $1.50

10-0287 Cyl. Tailpiece 7-Pin (54 function - 10L, 7L) $1.50

10-0842 Tailpiece (10 Line) for Medeco/Schlage SF prefix $4.06

10-3138 Cyl. Tailpiece-10L, 7L 7-Pin XC $1.50

11-0171 Cyl. Tailpiece 6-Pin (IC & RC -11L) $1.50

11-0172 Cyl. Tailpiece 7-Pin (IC - 11L) $1.50

11-0276 Cyl. Tailpiece-11L 7-Pin XC $1.50

13-0205 Plug Retaining Ring (11L, 10l, 7L, 6500) $1.47

13-0680 Cyl. Tailpiece Retainer (11L, 10L, 7L, 6500) $1.47

13-0895 Cyl. Tailpiece (10L, 7L, 6500) $1.50

13-1385 Cyl. Tailpiece (11L) $1.50

9, 8 (7 Knob) Line Cylinder Assemblies and Components Price

* 13-2194 For all functions except 50 function $51.00

* 13-2195 For 50 function (Not available in 5-pin) $76.00

13-2048 Cylinder Body & Slide Assembly. $29.50

* 13-3425 Cylinder Plug & Pin $21.46

06-0166 Plug Retaining Ring $1.47

6 Line Cylinder Assemblies and Components Price

* 13-3129 6 Pin (S and N Knobs)- All Except 50 function $51.00

* 13-3130 6 Pin (B Knob))- All Except 50 function $51.00

* 13-3108 6 Pin (S and N Knobs)-50 function $76.00

* 13-3109 6 Pin (B Knob)-50 function $76.00

13-3257 Cylinder body & Slide Assembly $29.50

* 13-3142 Cylinder Plug & Ring Assembly $21.46

13-0907 Cylinder Tailpiece (S & N Knobs) $1.47

13-0908 Cylinder Tailpiece (B Knob) $1.47

13-0205 Plug Retaining Ring $1.47

* 13-0674 Cylinder Plug/No Ring-50 function $21.46

13-0845 Cylinder Tailpiece (S + N Knobs-50 function) $1.47

13-0846 Cylinder Tailpiece (D Knob-50 function) $1.47

13-0680 Tailpiece Retainer Ring $1.47

5, 5500 Series Cylinder Assemblies & Components Price

* 13-3526 Cylinder Assembly $51.00

13-3514 Cylinder Body/Slide $29.50

* 13-0920 Cylinder Plug $21.46

13-0919 Cylinder Tailpiece $1.47

01-0870 Plug Retaining Ring (5500) $1.47

05-0214 Retainer (5-Line only) $4.30

460/470/480 Deadbolt Cylinder Price

* 13-3456 6-Pin Cylinder (484, 474) $51.00

* 13-3457 6-Pin Cylinder (485, 487) $51.00

* 13-3458 6-Pin Cylinder (486, 475) $51.00

* 13-3495 6-Pin Cylinder (464) $51.00

* 13-3496 6-Pin Cylinder (465) $51.00

13-3493 Cylinder Body/Slide Assembly $29.50

* 13-0874 Cylinder Plug (470, 480) $21.46

* 13-0904 Cylinder Plug (460) $21.46

* 13-0178 Cylinder Plug (4142, 4143) $21.46

13-0875 Cylinder Cap (470, 480) $2.23

13-0903 Cylinder Cap (460) $2.23

13-0884 Blocking Piece $0.74

13-0691 Cylinder Cap Pin for (460, 470, 480)

made before 6/03 $0.74

13-0693 Cylinder Cap Spring (460, 470, 480)

made before 6/03 $0.74

13-0878 Tailpiece (464, 474, 484 -1-3/4" Dr. only) $1.40

13-0880 Tailpiece (465, 485, 487) $1.40

13-0881 Tailpiece (486, 475) $1.53

13-0882 Cylinder Tail Washer (484) $1.47

13-0883 Cylinder Tail Washer

(465, 475, 485, 486, 487) $1.47

13-1554 Cap Pin (460, 470, 480) made after 6/03 $0.77

13-1555 Cap Spring (460, 470, 480) made after 6/03 $0.77

7600 Integralock Cylinders (All functions except 26, 27 & 50) Price

* 13-3987 Regular $78.00

* 13-3990 Signature $112.00

* 13-3991 Signature (Lost Ball) $132.00

* 13-3992 Regular (Lost Ball) $98.00

13-0080 Barrel Retainer $1.11

13-1116 Adaptor for 7600 $25.49

13-1139 Cylinder Body 6-Pin $30.85

13-1140 Cylinder Body-Signature $30.85

758/858 Padlock Price

01-4386 758 Cyl. retainer screw $2.28

13-1230 758 Cylinder Tailpiece $1.34

13-1231 Tailpiece (60-) for 758/858 $2.80

17-0067 758 Cylinder Retainer $11.80

17-0085 858 Cylinder retainer $11.80

13-4064 758/858 Cylinder & Tailpiece Assembly $51.00

13-4065 63-758/858 Cylinder & Tailpiece Assembly $44.00

01-9219 858 Cyl. retainer screw $3.82 *Specify Finish – US4 or US15


XC SERIES



XC Cylinders and Key System - PREFIX (to be added to all applicable products, except where noted in product catalogs)Prefix Description Add11 XC Key System - Includes 2 keys No addition

Notes: When expanding existing key systems, a copy of the existing bitting list is required at time of order, if not already on file w/SARGENT Key records department.XC prefix not available with the following prefixes: 10, 10UL, 22, 35, 51, 52, 60, 63, 64, SC, SEXC prefix not available with the following lock functions: 50Available in Small Format Interchangeable core - refer to CK-12 for pricesOrders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.

Keyways available:

SARGENT keyway families: L, R, (4A - Small Format Interchangeable Core 7-Pin - refer to CK-12)SARGENT restricted keyway families: A, B, N, K, (4B - Small Format Interchangeable Core 7Pin - refer to CK-12)Prior authorization from SARGENT key records is required before establishing a new key system

Keying Charges & Substitutions Add

Masterkeying or Higher level of keying, any quantity 10.00/cylMasterkeying or Higher level of keying, any quantity, cylinder only 10.00/cylConstruction Masterkeying (21-) with cylinders only 10.00/cylConstruction Masterkeying (21-) with lockset or exit device or cylinder 10.00/cylOmitted cylinder from lockset or exit device: Deduct

For omission of mortise cylinder or rim cylinder 53.00/cylFor omission of T-Zone(11), 10, 9, 8, 7, 6, 7500, 6500, 480, 470 line cylinders 51.00/cyl

Multiple cylinder function locks, exit devices - Add/Deduct charges accordingly per cylinderCut Master Keys Price Each11-6272 Masterkey, Grandmasterkey 7.0011-14-0418 Construction Masterkey (21-) 7.00

Keyblanks - Packed 50 per Box Keyway Families Available Price

11-6270 Master Keyblanks 6-Pin L, R refer to CK-1411-6270 Restricted Master Keyblanks 6-Pin A, B, N, K refer to CK-1511-6275 Day/Change Keyblanks 6-Pin L, R refer to CK-1411-6275 Restricted Day/Change Keyblanks 6-Pin A, B, N, K refer to CK-15Note: All SARGENT XC keyblanks are identified with the following markings:

SARGENT, "XC", "PAT. 6,526,791" and DO NOT DUPLICATE"

Extra Keys - Cylinders are packed standard with 2 keys each Price

For each extra key ordered with locksets, exit devices or cylinders Add 3.50/cylFor keys packed separately 4.00/key

Additional Charges:

Key Marking - Special marking is limited to space on blank side of keyblank Refer to CK-3Visual Key Control - Refer to CK-3Delete SARGENT Logo/Key Section Refer to CK-3Restricted Keyway - for charges Refer to CK-3All orders for restricted keyblanks, barrels, or product containing cylinders that have a restricted keyway must include a letter of authorization or a copy of purchase order from the end user.Prior authorization from SARGENT key systems is required before establishing a new key system that requires a restricted keyway.


XC SERIES



Mortise Cylinder 6 Pin (The XC add is included)Number Specify finish when ordering Price

11-41, 11-42, 11-43, 11-44, 11-46 $53.00 11-48, 11-50, 11-52, 11-54, 11-56 $78.00 Note: Price does not include Masterkeying

Body & Slide - 6-Pin - Mortise Cylinder (11-40 Series) Number Specify finish when ordering Price

13-4301 for #4113-4302 for #4213-4303 for #43 $31.86 13-4304 for #4413-4305 for #4613-4306 for #4813-4307 for #5013-4308 for #52 $45.93 13-4309 for #5413-4310 for #56

Plug - 6-Pin - Mortise Cylinder (11-40 Series) Number Specify finish (4 or 15)

13-4314 for #4113-4315 for #4213-4316 for #43 $21.46 13-4317 for #4413-4318 for #4613-4319 for #4813-4320 for #5013-4321 for #52 $32.19 13-4322 for #5413-4323 for #56

Optional Cams for use w/11-40 Series Mortise CylindersCam No. Add/cyl

13-0512 Adams Rite (1850) $5.31 13-0513 Adams Rite (4070) $5.31 13-0938 Schlage L $5.31 13-0660 SARGENT standard closed $2.80 13-0664 SARGENT Standard open slotted $2.80 13-0665 I/S of 8216 & 8292 $2.80 13-0921 4370 Keyswitch $5.31 13-0097 Misc. "open" $5.31 01-1121 Screw (2 required per cam) $0.19 Note: when ordering cams/screws, order in multiples of 100

Rim Cylinder (The XC add is included)Number Specify finish when ordering Price

11-34 $53.00 Note: Price does not include Masterkeying

Body & Slide - 6-Pin - Rim Cylinder (11-34 series) Number Specify finish when ordering Price

13-4299 $31.86

Plug - 6-Pin - Rim Cylinder (11-34 series) Number Specify finish (4 or 15) Price

13-4312 $21.46

Bored Cylinder Assembly 6 Pin (The XC add is included)Number Specify finish (4 or 15) Price

13-4562 for T-Zone13-4560 for 10, 7L, 6500 (8 Line lever)13-4568 for 8, 9 (7 Line knob)13-4564 for 6 Line (S & N knobs)13-4566 for 6 Line (B knob)13-4570 for 550013-4572 for 474 $51.00 13-4574 for 485, 48713-4576 for 475, 48613-4578 for 46413-4580 for 46513-4572 for 48413-4584 for 758 Padlock13-4582 for 7600 Integra (Except 26, 27, & 50) $78.00 Note: Price does not include MasterkeyingNote: Above available for all functions except 50 function

Cylinder Body - Bored Lock Number Price

13-4334 for T-Zone, 10, 7L, 6500 (8 Line lever)13-4335 for 8, 9 (7 Line knob)13-4336 for 6 Line (B, S & N knobs)13-4338 for 5500 $29.50 13-4337 for 460, 470, 480 Series13-4334 for 758 Padlock13-4339 for 7600 Integra Lock $30.85

Barrel/Plug Assembly - Bored LockNumber Specify finish (4 or 15) Price

13-4332 for T-Zone, 10, 7L, 6500 (8 Line lever)13-4332 for 6 Line (B, S & N knobs)13-4331 for 8, 9 (7 Line knob)13-4328 for 5500 $21.46 13-4330 for 480, 470 Series13-4329 for 460 Series13-4332 for 758 Padlock13-4312 for 7600 Integra Lock $21.46

Note: Mortise & Rim cylinder housings are available in the following finishes: 3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D.Bored Cylinder Assemblies, cylinder plugs/barrels are available in the following finishes: 4, 15


CK-10CYLINDERS AND KEYING

6300 REMOVABLE CORE CYLINDERS & OLD STYLE REMOVABLE CORE CYLINDERS

Removable Core Mortise & Rim Cylinders - Includes Master & Grand Master Keying Charges PriceNumber Specify Finish6334 (rim), 6342, 6343, 6344, 6346 (Includes #97 Rosette) 6-Pin only $97.00 50-6343 6-Pin only - Hotel cylinder $118.00

Removable Cores ONLY - Includes Master & Grand Master Keying Charges6300 6-Pin $44.00 50-6300 6-Pin - Hotel Cores $44.00

Removable Core Cylinders - Mortise (includes standard Cam 13-0542 unless specified other) & Rim Bodies ONLY6034 (Rim), *6042, *6043, *6044, *6046 (Includes #97 Rosette) 6-Pin only $53.00 50-6043 6-Pin only - Hotel Cylinder $74.00

Removable Cores ONLY - Unassembled

65-6300** H-Keyway – standard – other Keyways available $35.00

65-50-6300** Hotel Cores - C family Keyway-standard $35.00

Disposable Plastic Core (60-Prefix)

13-0792** Bottom Piece $1.61

13-0793** Top Piece $1.61

6300 Plug/Parts

13-0795 6-Pin – Barrel $21.46 13-3424 Inner Body and Slide Assy for 6300 $21.46

13-1074 Control Sleeve for 6300 & 10-6300 $18.64

01-0660 Retaining Ring for 6300 & 10-6300 $0.63

13-0797 for 6300 made before 3/06 with box logo $0.29

*Cylinders with following Cams (6042, 6342, 6043, 6343, 6044, 6344, 6046, 6346 Cylinders)

13-0806 Standard inside 16 & 92 function for 8200 & 7800 Series add $5.31

13-0832 Adams Rite (1850) add $5.31

13-0833 Adams Rite (4050) add $5.31

13-0922 Standard for 4370 Switch Lock add $5.31

13-0928 Schlage L add $5.31

13-1320 Straight Cam (used with 78/8250 Mortise Lock) add $5.31

13-1251 Wide Straight Cam add $5.31

Note: *Cams must be ordered with cylinders – permanently attached at the factory.

Removable Core Cylinders - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges. Specify Finish

51 Prefix - Permanent Core Add $44.00 Each Cylinder 52 Prefix - Construction Core See CK-2

Removable Core Cylinders - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges Specify Finish134, 134E Rim 6-Pin041, 042, 043, 044, 046 Mortise 5-Pin $97.00 142, 143, 144, 146 Mortise 6-PinRemovable Core ONLY - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges. Specify Finish5134 (for Rim) 5-Pin, 6-Pin5041, 5042, 5043, 5044, 5046 (for Mortise) 5-Pin $44.00 5142, 5143, 5144, 5146 (for Mortise) 6-PinPlug ONLY - OLD STYLE Specify Finish13-0631 Mortise Plug 7-Pin $27.22 13-0242 Rim Plug 7-Pin $27.22 13-0227 Slide $1.13 Mortise and Rim Housing Only - OLD STYLE Specify Finish13-2052 Mortise 6-Pin13-2051 Mortise 5-Pin $53.00 13-2057 Rim 5&6-Pin

**Specify finish – US4 or US15

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D, finishes.Cylinder plugs/barrels/cores will be in either US4 or 15. Specify finish when ordering.


CK-11CYLINDERS AND KEYING

SMALL FORMAT INTERCHANGEABLE CORE


SMALL FORMAT INTERCHANGEABLE CORE PREFIX (to be added to all applicable products, except where noted in product catalogs)Prefix Description Add

70 Small Format Interchangeable core - plastic disposable core provided No addition 72 Small Format Interchangeable core - 6-Pin construction core provided See CK-2 73 Small Format Interchangeable core - 6-Pin keyed

- Includes Master & Grand Master Keying charges $40.00 /cyl73-7P Small Format Interchangeable core - 7-Pin keyed

- Includes Master & Grand Master Keying charges $40.00 /cylNotes: Orders with Small Format Interchangeable type construction cores (72-) receive 6 construction

keys and 1 control key per order as standard. For additional, please note on order.Orders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.Mortise cylinder size #43 with SARGENT offset cam only; Rim cylinder size #34 only with SARGENT hole pattern.When expanding existing key systems, a copy of the existing bitting list is required at time of order, if not already on file w/SARGENT Key records department.

Keyways available:

Small format competitor keyway families: A, B, C, D, E, F, G, H, J, K, L, M - A2 or A4 SystemSmall format SARGENT keyway families: 4A standard, 4B restricted keyway - A2 or A4 SystemPrior authorization from SARGENT key records is required before establishing a new key system

Cut Master Keys Price Each

6282B Masterkey/Grandmasterkey/Control Key $7.00 14-0385 Construction Masterkey (72-) $7.00 14-0386 Construction Control Key (72-) $7.00

Keyblanks - Packed 50 per Box Price

6285B Small Format system Keyblanks - 6 or 7 Pin - specify keway required - example: 6285BA $1.62 6285B4B Small Format system Keyblanks - Restricted Keyway - example: 6285B4B $3.38

Visual Key Control Price

Stamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol N/AEach additional key stamped 1.00/keyStamping code (keyset symbol) on mortise cylinder, rim cylinder, or 7300B body 3.00/cylCylinder permanent stamping options: Cylinder plug/barrel face N/ABack of the Mortise/Rim bodies or the side only of 7300B cores with up to 7 characters 3.00/cyl

Additional Charges:

Extra Keys - Refer to CK-3Key Marking - Special marking is limited to space on blank side of keyblank Refer to CK-3Delete SARGENT Logo/Key Section N/ARestricted Keyway - for charges Refer to CK-3Less Logo/Key Section N/A

Mortise/Rim Cylinder with IC Core, Cylinder ShellsNumber Description Price

73-43 1-3/8" Mortise 6-Pin w/SARGENT cam$93.00 73-46 1-3/4" Mortise 6 Pin w/SARGENT cam$93.00 73-34 Rim 6-Pin $93.00 73-7P-43 1-3/8" Mortise 7-Pin w/SARGENT cam$93.00 73-7P-46 1-3/4" Mortise 7-Pin w/SARGENT cam$93.00 73-7P-34 Rim 7-Pin $93.00 70-43 1-3/8" Mortise 6 or 7 Pin cylinder shell $53.00 70-46 1-3/4" Mortise 6 Pin w/SARGENT cam$53.00 70-34 Rim 6 or 7 Pin cylinder shell $53.00

Note: Specify finish: 3, 4, 9, 10, 10B, 10BL, 20, 26, 26D

IC Cores ONLY – Keyed, Uncombinated, Construction CoresNumber Description Price7300B 6-Pin Master keyed core $40.00 7P-7300B 7-Pin Master keyed core $40.00 65-7300B 6-Pin uncombinated - no keyblanks $31.00 65-7P-7300B 7-Pin uncombinated - no keyblanks $31.00 13-3581 6 Pin Construction core (72-) See CK-2 13-0964 disposable plastic core - bottom plug $1.48 13-0965 disposable plastic core - top plug $3.37



XC - SMALL FORMAT INTERCHANGEABLE CORE



XC SMALL FORMAT INTERCHANGEABLE CORE PREFIX (to be added to all applicable products, except where noted in product catalogs)Prefix Description Add

1170 XC Small Format Interchangeable core - plastic disposable core provided No addition 11727P XC Small Format Interchangeable core - 7-Pin construction core provided See CK-2 11737P XC Small Format Interchangeable core - 7-Pin keyed

- Includes Master & Grand Master Keying charges $40.00 /cyl

Notes: Orders with XC Small Format Interchangeable type construction cores (11-72-) receive 6 constructionkeys and 1 control key per order as standard. For additional, please note on order.Orders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.Mortise cylinder size #43 with SARGENT offset cam only; Rim cylinder size #34 only with SARGENT hole pattern.When expanding existing key systems, a copy of the existing bitting list is required at time of order, if not already on file w/SARGENT Key records department.

Keyways available:

XC Small format SARGENT keyway families: 4A standard, 4B restricted keyway - A2 or A4 SystemPrior authorization from SARGENT key records is required before establishing a new key system

Cut Master Keys Price Each

11-6282B XC Masterkey/Grandmasterkey/Control Key 7.00 11-14-0385 XC Construction Masterkey (72-) 7.00 11-14-0386 XC Construction Control Key (72-) 7.00

Keyblanks - Packed 50 per Box Price

11-6285B XC Small Format system Keyblanks - 7 Pin - example: 11-6285B4A $1.62 11-6285B4B XC Small Format system Keyblanks - Restricted Keyway - example: 11-6285B4B $3.38 Prior authorization from SARGENT key records is required before establishing a new key systemNotes: All SARGENT XC keyblanks are identified with the following markings:

SARGENT, “XC”, PAT, 6,526,791 and DO NOT DUPLICATE

Extra Keys - Cylinders are packed standard with 2 keys each Price

For each extra key ordered with locksets, exit devices or cylinders Add 3.50/cylFor keys packed separately 4.00/key

Visual Key Control Price

Stamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol (Plug N/A stamped) N/AEach additional key stamped 1.00/keyStamping code (keyset symbol) on mortise cylinder, rim cylinder, or 11-7300B body 3.00/cylXC Cylinder permanent stamping options: Cylinder plug/barrel face N/AXC Back of the Mortise/Rim bodies or the side only of 11-7300B cores with up to 7 characters 3.00/cyl

Additional Charges:

Key Marking - Special marking is limited to space on blank side of keyblank Refer to CK-3Delete SARGENT Logo/Key Section N/ARestricted Keyway - for charges Refer to CK-3Less Logo/Key Section N/A

Mortise/Rim Cylinder with IC Core, Cylinder ShellsNumber Description Price

11737P-43 XC Mortise 7-Pin w/SARGENT cam $93.00 737P-34 XC Rim Cyl. 7-Pin $93.00 1170-43 XC Mortise 7 Pin cylinder shell $53.00 1170-34 XC Rim 7 Pin cylinder shell $53.00

Note: Specify finish: 3, 4, 9, 10, 10B, 10BL, 20, 26, 26D

IC Cores ONLY – Keyed, Uncombinated, Construction CoresNumber Description Price117P-7300B 7-Pin Master keyed core $40.00 11657P-7300B 7-Pin uncombinated - no keyblanks $31.00 11-13-3581 Construction core (11-72-) CK-2 13-0964 Disp. plastic core - bottom plug (70-) $1.48 13-0965 Disp. plastic core - top plug (70-) $3.37 431-7 Pin Shear Tool $249.00 05-0040 XC Tailpiece - 6500-7-Pin $1.50 10-3138 XC Tailpiece - 10L-7-Pin $1.50 11-0276 XC Tailpiece - 11L-7-Pin $1.50


KEYING KITS • TOOLS • GAUGES • COMPONENTS



Keying Kits • Tools • Gauges Price— Depth Key Sets $32.00 LT2 Cylinder Loading Thimble $37.00 LT6 Cylinder Loading Rod $32.00 2 Tru-Arc Plier $32.00 432RC Sargent Removable Core Installation Tool $42.00 432IC Small Format Interchangeable Core Installation Tool $42.00 436-1 Top Loading Kit $398.00 435 Key Gauge $24.00 437BR Bump Resistant Retrofit pinning Kit $250.00 437C Rekeying Kit (Conventional Keying) $510.00 437RC/UL* Removable Core Rekeying Kit (Conventional & Signature) $239.00 437S Signature Re-keying Kit $510.00 439 Lost Ball (21 Prefix) Field Construction Keying Kit $342.00 13-1034 Loading Rod (6, 8, 10L & Mortise) $10.07 13-1035 Loading rod (480, 6300) $10.07 13-1037 Pin Loading Rod $10.07 13-1103 Field Construction Balls (3 required per cylinder) (minimum order quantity 500 each) $0.18 13-1138 Spring Loading Rod $10.07 14-0070 Extractor (Used with 22- prefix) $0.18 18-0070 Cylinder Lube Spray $16.06 18-0435 Cylinder Cleaner/De-Icer $16.06 77-0273 Loading Rod $17.38

*This kit must be used in conjunction with 437C or 437S re-keying kits when keying 6300 & 10-6300 Cores.UL pins must be ordered separately.

Part No. Bottom (Key) Pin Size Price13-0064 113-0065 213-0066 313-0067 413-0068 5 0.1113-0069 6 (Min. order 13-0070 7 100 each)13-0071 813-0072 913-0073 10Cylinder Spring/Slides (minimum quantity 100 each)13-0265 Springs $0.10 13-0779 Slides 34 & 40 Series Cylinder $0.29 13-0797 for 6300 made before 3/06 with box logo $0.29 13-0487 Hollow Driver Spring (3rd & 4th) $0.63 13-0215 Control Spring for Old Style Rem. Core $0.63 13-1341 Slide for 6300 made after 3/06 $0.29

Signature Cylinder Pins (Optional for 437RC/UL kit)Hardened Stainless Pins (for UL437 Cylinders)Part. No. Size Price13-1210 113-1211 213-1212 313-1213 413-1214 513-1215 6 2.5513-1216 7 (Min. order 13-1217 8 25 each)13-1218 913-1222 B-Driver13-1223 C-DriverNote: To re-key existing Sargent UL437 Cylinders.

Master Pins (Splits & Drivers)Part No. Size Price13-0051 213-0052 313-0053 413-0054 513-0055 613-0056 713-0057 8 0.1113-0058 9 (Min. order 13-0059 10 100 each)13-0060 1113-0061 1213-0062 1313-0063 14For Sargent 6300 Removable Core & SignatureRemovable Core—for 3rd & 4th positions:Part. No. Hollow Drivers Size Price13-1229 3 $0.32 13-1234 413-1235 513-1236 613-1237 7 0.1613-1238 8 (Min. order 13-1239 9 100 each)13-1240 1013-1761 11

For Sargent 6300 Removable Core & SignatureRemovable Core—Parts:Part. No. Miscellaneous Price01-0660 Retaining Ring $0.63 Bump Resistant PinsPart No. Size Price13-1770 10 0.4213-1773 13 (Min. order

100 each)


KEYBLANKS



Key Blanks - 5 Pin Price Keys

Number Section Per 100 Keys Per Box

Single Keyway Systems

265 U*, R* $174.00 50

275 S* $136.00 50

*Used on existing systems ONLY.

Multi Keyway Systems – Composite Sections

270 LD, LH, LM, RD, RH, RM $153.00 50

270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $160.00 50

273 CD, CH, CM (Large Bow) $168.00 50

273 CDH, CDM, CHM, CN (Large Bow) $168.00 50

Multi Keyway Systems – Single Sections

275 LA, LB, LC, LE, LF, LG, LJ, LK, LL, RA, RB, RC, RE, RF, RG, RJ, RK, RL $134.00 50

Single Keyway System (Large bow)

278 CR $157.00 50

Multi Keyway System (Large bow)

278 CA, CB, CC, CE, CF, CG, CJ, CK, CL $153.00 50

Key Blanks - 6 PIN


6265 U*, R* $177.00 50

6275 S* $139.00 50



6270 HD, HH, HM, LD, LH, LM, RD, RH, RM $157.00 50

6270 HDH, HDM, HHM, HN, LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $162.00 50

Multi Keyway Systems – Composite Sections (Large Bow)

6273 CD, CH, CM $174.00 50

6273 CDH, CDM, CHM, CN $179.00 50


6275 HA, HB, HC, HE, HF, HG, HJ, HK, HL, LA, LB, LC, LE, LF, LG, LJ, LK, LL, $136.00 50

RA, RB, RC, RE, RF, RG, RJ, RK, RL

Multi Keyway Systems – Large Bow Single Sections


Single Keyway System - Large Bow

6278 CR $157.00 50

XC Keyblanks available in L, R Keyway Families

11-6270 L, R Master Keyblanks 6-Pin $162.00 50

11-6270 LD, LH, LM, RD, RH, RM $157.00 50

11-6270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $162.00 50

11-6275 L, R Day/Change Keyblanks 6-Pin $136.00 50

For keys not shown, consult factory.


KEYBLANKS



Key Blanks - 7 Pin Price Keys

Number Section Per 100 Keys Per Box


7275 S* $144.00 50



7270 LD, LH, LM, RD, RH, RM $162.00 50

7270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $166.00 50

Multi Keyway Systems, Composite Sections (Large Bow)

7273 CD, CH, CM $179.00 50

7273 CDH, CDM, CHM, CN $184.00 50


7275 LA, LB, LC, LE, LF, LG, LJ, LK, LL, RA, RB, RC, RE, RF, RG, RJ, RK, RL $141.00 50

Multi Keyway Systems – Large Bow Keys


Restricted Keyblanks - End user authorization letter required with each order. SARGENT Keyway family’s – A, B, G, K, N, V

6275 Non-Published (restricted) Day Key Blank (6 pin) $190.00 50

6270 Non-Published (restricted) Master Key Blank (6 pin) $212.00 50

7275 Non-Published (restricted) Day Key Blank (7 pin) $197.00 50

7270 Non-Published (restricted) Master Key Blank (7 pin) $218.00 50

XC Keyblanks available in A, B, N, K Restricted Keyway Families

11-6270 A, B, N, K Restricted Master Keyblanks 6-Pin $279.00 50

11-6275 A, B, N, K Restricted Day/Change Keyblanks 6-Pin $279.00 50

Note: For anything not listed, consult factory

Consult Factory for Large Bow Keys.


SARGENT CUTKEYS/COMPETITORS KEYWAYS



Cut Master Level Keys

Number Description Price Each

272 5 Pin - Standard Bow Master Keys

274 5 Pin - “C” Family Master Keys

6272 6 Pin - Standard Bow Master Keys


7272 7 Pin - Standard Bow Master Keys $7.00 Each


14-0069 Construction MK (22-)

14-0222 6 Pin Emergency Key, Bored Locks

14-0034 5 Pin Emergency Key, All Locks

14-0035 6 Pin Emergency Key, Mortise Locks

14-0036 6 Pin Emergency Key, Removable Core, Hotel Function

14-0418 Construction MK (21-)

6272 6 Pin Control Key for 6300s

Note: On new master keyed systems, removable and interchangeable core systems, and construction Master keyed systemorders, please specify quantity of master keys, control keys, and master construction keys required. If order does notgive quantities of key requirements, a minimum of 6 each master keys will be provided on new master keyed orders;1 each control key will be provided on new removable core or interchangeable core jobs; 6 each construction masterkeys will be provided for construction keyed orders.

Competitors Keyways

A selection of other manufacturer’s keyways are available. Consult optional substitutions in each product section for

availability. Not available for Hotel/Motel functions or factory master keyed. Prefixes are adds to a product and cannot

be ordered separately. Use part numbers as listed below.

Manufacturer Keyway Description Prefix Finish Price

Best See CK-8 See CK-8 See CK-8 See CK-8 See CK-8

Schlage* C 6 pin, 0 bitted SC- Per product NC

Schlage* E 6 pin, 0 bitted SE- Per product NC

*Mortise Cylinder size 41 ONLY and Rim Cylinder (#34) with SARGENT hold pattern. 2 each 6 Pin key blanks provided.

Cylinder Only Keyway Description Part Number Finish Price

Schlage C 6 pin, 0 bitted 6L, 6500, 7L, 10L, 11L 13-3613 x SC 4,15 $51.00

Schlage E 6 pin, 0 bitted 6L, 6500, 7L, 10L, 11L 13-3614 x SE 4,15 $51.00

Schlage C 6 pin, 0 bitted 480, 470 deadlock 13-3651 x SC 4,15 $51.00

Schlage E 6 pin, 0 bitted 480, 470 deadlock 13-3652 x SE 4,15 $51.00

Schlage C 6 pin, 0 bitted 41 mort cyl. only SC-41 3,4,10,10B,26,26D $53.00

Schlage E 6 pin, 0 bitted 41 mort cyl. only SE-41 3,4,10,10B,26,26D $53.00

Schlage C 6 pin, 0 bitted 34 rim cylinder SC-34 3,4,10,10B,26,26D $53.00

Schlage E 6 pin, 0 bitted 34 rim cylinder SE-34 3,4,10,10B,26,26D $53.00

SARGENT hardware use SARGENT cylinders. SARGENT offers some competitor’s keyways for use on certain SARGENTHardware. These keyways are broached in barrels that are designed to operate in cylinders specific to SARGENT hardware.

Note: All competitor keyway cylinders are NOT available in Hotel Functions.

CK-17KESO F1 SECURITY SYSTEM

HOLDERS & STOPS



Keso F1 Security System Variations

Prefix Number Description Add to Set Price

F1 82 KESO F1 Security Cylinder $47.00 per Cylinder

F1 83 KESO F1 Security Removable Core Cylinders $67.00 per Cylinder

84* KESO Security Removable Construction Core Cylinders See Below

Above prefix numbers and price additions apply to 8 Line, 9 Line, 10 Line (82 Prefix only), Mortise Locks and Exit Devices only.Above price additions include all keying charges. Consult individual product catalog for availability.

Extra Keys Extra Keys with locksets or cylinders Add $7.00 for extra key

Cut Keys

Prefix Number Description Price

F1 372 Master Key

F1 372 Day Key

F1 373 Removable Core Control or Emergency Key for all cylinder locks except 8G50 $7.00 Each

F1 374 Emergency Key for 8G50

KESO F1 cut keys are identified by the key number stamped on the bow of the key.To place an order for cut keys, please be sure to include this number.SARGENT will not be responsible for the function of the keys supplied using misidentified KESO F1 key numbers.Please consult factory, if there are any questions, to verify that the stamp number is on file and to cross reference it to a keyset symbol.

KESO TEMPORARY CONSTRUCTION CORE – Same for KESO F1 and KESO key systems

(84-) The customer will be invoiced at $33.50 NET/NET per construction core and the full invoice must be paid according toSARGENT’s standard terms. No further discount will be applied. When construction cores are to be returned, the distributor must contact Customer Service for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $31.50 creditfor each construction core returned from the specified project.

372C Construction Day Key $7.00

373C Construction Control Key $7.00

Visual Key Control

Stamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol Add $5.00 /cyl.

Each additional key Add $1.00 /key

Note: On new master keyed systems, removable and interchangeable core systems, and construction Master keyed systemorders, please specify quantity of master keys, control keys, and master construction keys required. If order does not givequantities of key requirements, a minimum of 6 each master keys will be provided on new master keyed orders; 1 eachcontrol key will be provided on new removable core or interchangeable core jobs; 6 each construction master keys will beprovided for construction keyed orders.

KESO F1 KESO F1 codes are tightly controlled by the factory. End users signature required forkeys & cylinders. All keying and key cutting is performed in a factory secure area.

Note: KESO keys are not available Less Logo.


CYLINDERSHOLDERS & STOPS



8 Line, 9 Line & 10 Line - KESO F1 Security Cylinders – For use in locks prepared for KESO F1 Specify Finish

Prefix Number Description 4, 15

F1 82-48-1 All 8, 9 Line Functions (except 50 Function)

F1 82-48-2 8, 9 Line #50 Function $93.00

F1 82-10-1 All 7, 10 Line Functions (except 50 Function)

F1 82-11-1 All 11 Line Functions (except 50 Function)

8 Line & 9 Line - KESO F1 Security Removable Cylinder – For use in locks prepared for KESO Specify Finish

Prefix Number Description 4, 15

F1 83-48-1 $114.00

Rim - KESO F1 Security Cylinders Specify Finish

Prefix Number Description US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

F1 64 Rim Cylinder $93.00

Mortise - KESO F1 Security Cylinders Specify Finish


F1 71, 72, 73, 74, 76 Regular cam

F1 72-2, 73-2 Hotel cam $93.00

F1 71-8, 72-8, 73-8, 74-8, 76-8 Short cam

F1 47-71-101 Thru 47-76-101 Adams Rite cam $102.00

F1 47-71-103 Thru 47-76-103 Russwin cam $102.00

F1 47-71-104 Thru 47-76-104 Adams Rite cam $102.00

F1 47-71-105 Thru 47-76-105 Armalite cam $102.00

F1 47-71-106 Thru 47-76-106 Schlage L cam $102.00

F1 47-71-102 Thru 47-76-102 Corbin/Russwin Master Ring kit and cam $102.00

Integra Lock Cylinders Specify Finish


F1 82-76-1 $116.00

F1 83-76-1 (Removable core) $139.00


KESO F1 keysets are stamped on the cylinders in a concealed location.For best results when ordering additional cylinders to the same keyset, please provide this stamped keyset on your order.


CYLINDERS/PADLOCKSHOLDERS & STOPS



Mortise Cylinders with Removable Cores Only (Not available for hotel functions)

Prefix Number Description Specify Finish

F1 172, 173, 174, 176 Regular offset cam only

F1 172-8, 173-8, 174-8, 176-8 Short cam (For 8216 & 8292 Lock Functions – Inside Cylinder) $118.00

F1 47-172-101 Thru 47-176-101 Adams Rite cam (MS1850)

F1 47-172-104 Thru 47-176-104 Adams Rite cam (MS4050) $126.00

Removable Core Only – For Mortise Cylinders


F1 5172, 5173, 5174, 5176 Regular offset cam

F1 5172-8, 5173-8, 5174-8, 5176-8 Short Cam (For 8216 & 8292 Lock Functions – Inside Cylinder) $67.00

F1 47-5172-101 thru 47-5176-101 Adams Rite Cam (MS1850) $75.00

F1 47-5172-104 thru 47-5176-104 Adams Rite Cam (MS4050)

Rim Cylinders with Removable Core



Removable Core Only – For Rim Cylinders



KESO Cylinder Cams

Number Description Specify Finish

13-2563 For use with SARGENT KESO F1 cylinders

71 thru 76 and 172 thru 176. All functions except 50 $2.70 each

13-2283 For use with 50 Lock Function. $13.79 each

13-2522 For use on inside cylinder of 16 Lock Function $5.11 each


Mortise/Rim Removable Core Cylinder - Housings ONLY

Number Description Price

072, 073, 074, 076 - Mortise Housing only $48.00

064 - Rim Housing only $48.00

Removable Construction Core ONLY - for Mortise/Rim Cylinders

Mortise Price

5472, 5473, 5474, 5476 - for Mortise type cylinder

5472-8, 5473-8, 5474-8, 5476-8 - for Mortise type cylinder x short offset cam

47-5472-101, 47-5473-101, 47-5474-101, 47-5476-101 - for Mortise type cylinder x Adams Rite Cam(MS1850) $67.00

47-5472-104, 47-5473-104, 47-5474-104, 47-5476-104 - for Mortise type cylinder x Adams Rite Cam

5464 - for Rim type cylinder




UL LISTED CYLINDERS/CAMS/PADLOCKS

UL Listed KESO F1 Security Cylinders PricePrefix Number Description 10, 26, 26DF1 4252 Utility Lock – Flat Cam $134.00

F1 4252-2 Utility Lock – Offset Cam $134.00

F1 4253 Switch Lock – Available in 26 Finish Only $170.00


F1 4271, 4272,4273,4274,4276 Mortise Cylinder $107.00

F1 4271-106 $118.00

Cam Number Description Price13-2563 Regular offset cam $2.70 ea.

13-2283 Hotel cam (-2) $13.79 ea.

13-2522 Short offset cam (-8) $5.11 ea

13-2521 Adams Rite MS 1850 cam (-101)

13-2519 Corbin/ Russwin cam (-103)

13-2562 Adams Rite cam (-104)$9.26

13-0939 Schlage L cam (-106)

13-2520 Corbin/Russwin Ring Cylinder Cam (-102) $28.94

16-0129 4152 Cam $2.13

16-0146 4152-2 Cam $5.39

Utility Locks PricePrefix Number Description 3,4,10,26,26DF1 4152 Flat cam $122.00

F1 4152-2 Offset cam $122.00

Locker Locks (For 1-1/8" and 1-3/8" Doors Only) PricePrefix Number Description 3,4,10,26,26DF1 82-1654 $134.00

Switch Lock PricePrefix Number Description 26F1 4153 $159.00

Miscellaneous Qty. Per Bag13-0080 Rim Cylinder Plug Retaining Ring 25 $1.11

13-0085 Flat Tail Piece 25 $1.11

Padlocks1" Shackle Standard, For 2", add -2 as suffix, For 4", add -4 as suffixPrefix Number Description Specify FinishF1 856 Brass ShackleF1 857 Key Removable in Locked Position OnlyF1 856C Brass Shackle with 9” chainF1 857C Key Removable in Locked Position Only with 9” chainF1 856HS Hardened Steel Shackle $126.00 F1 857HS Hardened Steel Shackle Key Removable in Locked Position OnlyF1 856HSC Hardened Steel Shackle with 9” chainF1 857HSC Hardened Steel Shackle with 9” chain Key Removable in

Locked Position Only

Padlock Weather Shield Kit


6013K $37.00

CK-21KESO F1 SECURITY SYSTEMS

CYLINDERSHOLDERS & STOPS



Type of Repair List Price

SARGENT Error No Charge

Pin Wear within 1-yr guarantee No Charge

Pin Wear outside guarantee Price of new cylinder

Field Misuse Price of new cylinder

Note: Out of warranty repair requests must be accompanied with a purchase order covering repair charges.

Repair product should be sent via a trackable carrier to:

SARGENT Manufacturing Company

P.O. Box 9725

100 Sargent Drive

New Haven, CT 06536

ATTN: KESO F1 Security Service Center

The following charges will apply for cylinders sent to the Service Center for repair.

Guarantee

The SARGENT KESO F1 Cylinders are guaranteed for a

period of one year from date of installation against defective

workmanship, material or wear.

This guarantee is based on all items being installed in

accordance with templates and installation instructions, and

does not include products damaged as a result of

misapplication or vandalism.



CK-22KESO SECURITY SYSTEM

Keso Security System Variations

Prefix # Description Add to Set Price

82 KESO Security Cylinder $47.00 per Cylinder

83 KESO Security Removable Core Cylinders $67.00 per Cylinder

84* KESO Security Removable Construction Core Cylinders See Below

Above prefix numbers and price additions apply to 8 Line, 9 Line, 10 Line (82 Prefix only),

Mortise Locks and Exit Devices only. Above price additions include all keying charges.

Extra Keys with locksets or cylinders Add $7.00 for extra key

Cut Keys

Number

372 Master Key

372 Day Key

373 Removable Core Control or Emergency Key for all cylinder locks except 8G50 $7.00 Each

374 Emergency Key for 8G50

Keyblanks Keys

Number Price Per Box

14-0092 Control Keyblank $4.00 /ea. 25

14-0090 Master and Change Keyblank $4.00 /ea. 25

KESO cut keys are identified by the key number stamped on the bow of the key.To place an order for cut keys, please be sure to include this number.SARGENT will not be responsible for the function of the keys supplied using misidentified KESO key numbers.Please consult factory, if there are any questions, to verify that the stamp number is on file and to cross reference it to a keyset symbol.

KESO TEMPORARY CONSTRUCTION CORE

(84-) The customer will be invoiced at $33.50 NET/NET per construction core and the full invoice must be paid according toSARGENT’s standard terms. No further discount will be applied. When construction cores are to be returned, the distributor must contact Customer Service for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $31.50 creditfor each construction core returned from the specified project.

372C Construction Day Key $7.00

373C Construction Control Key $7.00


KESO KESO codes tightly controlled by the factory, end users signature required for keys & cylinders. All keying and key cutting performed in a factory secure area.Available for existing systems only.

Note: KESO keys and keyblanks are not available Less Logo.




CYLINDERS

8 Line, 9 Line & 10 Line - Keso Security Cylinders – For use in locks prepared for KESO Specify Finish

Number Description 4, 15

82-48-1 All 8, 9 Line Functions (except 50 Function)

82-48-2 8, 9 Line #50 Function $93.00

82-10-1 All 7, 10 Line Functions (except 50 Function)

82-11-1 All 11 Line Functions (except 50 Function)

8 Line & 9 Line - Keso Security Removable Cylinder – For use in locks prepared for KESO 4, 15

83-48-1 $114.00

Rim - Keso Security Cylinders US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

64 Rim Cylinder $93.00

Mortise - Keso Security Cylinders US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

71, 72, 73, 74, 76 Regular cam

72-2, 73-2 Hotel cam $93.00

71-8, 72-8, 73-8, 74-8, 76-8 Short cam

47-71-101 Thru 47-76-101 Adams Rite cam $102.00

47-71-103 Thru 47-76-103 Russwin cam $102.00

47-71-104 Thru 47-76-104 Adams Rite cam $102.00

47-71-105 Thru 47-76-105 Armalite cam $102.00

47-71-106 Thru 47-76-106 Schlage L cam $102.00

47-71-102 Thru 47-76-102 Corbin/Russwin Master Ring kit and cam $102.00

Integra Lock Cylinders US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D

82-76-1 $116.00

83-76-1 (Removable core) $139.00


KESO keysets are stamped on the cylinders in a concealed location.For best results when ordering additional cylinders to the same keyset, please provide this stamped keyset on your order.




CYLINDERS/PADLOCKS

Mortise Cylinders with Removable Cores Only (Not available for hotel functions)


172, 173, 174, 176 Regular offset cam only

172-8, 173-8, 174-8, 176-8 Short cam (For 8216 & 8292 Lock Functions – Inside Cylinder) $118.00

47-172-101 Thru 47-176-101 Adams Rite cam (MS1850)

47-172-104 Thru 47-176-104 Adams Rite cam (MS4050) $126.00

Removable Core Only – For Mortise Cylinders

5172, 5173, 5174, 5176 Regular offset cam

5172-8, 5173-8, 5174-8, 5176-8 Short Cam (For 8216 & 8292 Lock Functions – Inside Cylinder) $67.00

47-5172-101 thru 47-5176-101 Adams Rite Cam (MS1850) $75.00

47-5172-104 thru 47-5176-104 Adams Rite Cam (MS4050)

Rim Cylinders with Removable Core


Removable Core Only – For Rim Cylinders


Mortise/Rim Removable Core Cylinder - Housings ONLY


072, 073, 074, 076 - Mortise Housing only $48.00

064 - Rim Housing only $48.00

Removable Construction Core ONLY - for Mortise/Rim Cylinders

Mortise Price

5472, 5473, 5474, 5476 - for Mortise type cylinder

5472-8, 5473-8, 5474-8, 5476-8 - for Mortise type cylinder x short offset cam

47-5472-101, 47-5473-101, 47-5474-101, 47-5476-101 - for Mortise type cylinder x Adams Rite Cam(MS1850) $67.00

47-5472-104, 47-5473-104, 47-5474-104, 47-5476-104 - for Mortise type cylinder x Adams Rite Cam

5464 - for Rim type cylinder


KESO Cylinder Cams

13-2563 For use with SARGENT KESO cylinders 71 thru 76 and 172 thru 176.

All functions except 50 $2.70 each

13-2283 For use with 50 Lock Function. $13.79 each

13-2522 For use on inside cylinder of 16 Lock Function $5.11 each




UL LISTED CYLINDERS/CAMS/PADLOCKS

UL Listed Keso Security Cylinders PriceNumber Description 10, 26, 26D4252 Utility Lock – Flat Cam $134.00

4252-2 Utility Lock – Offset Cam $134.00

4253 Switch Lock – Available in 26 Finish Only $170.00


4271, 4272,4273,4274,4276 Mortise Cylinder $107.00

4271-106 $118.00

Cam Number Description Price13-2563 Regular offset cam $2.70 ea.

13-2283 Hotel cam (-2) $13.79 ea.

13-2522 Short offset cam (-8) $5.11 ea

13-2521 Adams Rite MS 1850 cam (-101)

13-2519 Corbin/ Russwin cam (-103)

13-2562 Adams Rite cam (-104)$9.26

13-0939 Schlage L cam (-106)

13-2520 Corbin/Russwin Ring Cylinder Cam (-102) $28.94

16-0129 4152 Cam $2.13

16-0146 4152-2 Cam $5.39

Utility Locks 3,4,10,26,26D4152 Flat cam $122.00

4152-2 Offset cam $122.00

Locker Locks (For 1-1/8" and 1-3/8" Doors Only) 3,4,10,26,26D82-1654 $134.00

Switch Lock 264153 $159.00

Miscellaneous Qty. Per Bag13-0080 Rim Cylinder Plug Retaining Ring 25 $1.11

13-0085 Flat Tail Piece 25 $1.11

Padlocks1" Shackle Standard, For 2", add -2 as suffix, For 4", add -4 as suffix856 Brass Shackle

857 Key Removable in Locked Position Only

856C Brass Shackle with 9” chain

857C Key Removable in Locked Position Only with 9” chain

856HS Hardened Steel Shackle $126.00

857HS Hardened Steel Shackle Key Removable in Locked Position Only

856HSC Hardened Steel Shackle with 9” chain

857HSC Hardened Steel Shackle with 9” chain Key Removable in

Locked Position Only

Padlock Weather Shield Kit6013K $37.00



CK-26KESO SECURITY SYSTEMS

CYLINDERS

Type of Repair List Price

SARGENT Error No Charge

Pin Wear within 1-yr guarantee No Charge

Pin Wear outside guarantee Price of new cylinder

Field Misuse Price of new cylinder

Note: Out of warranty repair requests must be accompanied with a purchase order covering repair charges.

Repair product should be sent ADD to :

SARGENT Manufacturing Company

P.O. Box 9725

100 Sargent Drive

New Haven, CT 06536

ATTN: KESO Security Service Center

The following charges will apply for cylinders sent to the Service Center for repair.

Guarantee

The SARGENT KESO Cylinders are guaranteed for a

period of one year from date of installation against defective

workmanship, material or wear.

This guarantee is based on all items being installed in

accordance with templates and installation instructions, and

does not include products damaged as a result of

misapplication or vandalism.

The date of manufacture is code stamped on the side of

the cylinder denoted by use of an alphabetical letter beginning

with the letter A which stands for the month of January in the

year 1971. The code goes through the alphabet ending in Z

which stands for the month of March in the year 1973. When

this occurs, the code is doubled by using AA which stands for

the month of April in the year 1973. BA would stand for June,

1976.

CK-27SIGNATURE SERIES

CYLINDERS & KEYING



Signature cylinders have the Signature Quill Logo embossed on the face of the cylinder barrel. Signature keys have SARGENTembossed on one side and the Signature Quill Logo, specific Signature code pattern and one additional line for stamping. Keyblanks are also available blank one side. Consult the Signature catalog for more specific details. Please contact the factory forkeyways available.

Please Note:Signature products require a special ordering procedure. Please be sure that you include the following information when you send your order to Sargent for processing:

1. Keying Cover Sheet2. Signature Cover Sheet with complete end user information and distributor information3. Pin Coded/Letter of authorization from end user

Missing or incomplete information will cause delay in processing and may result in the return of your order.Forms may be obtained by contacting Sargent Customer Service at (800) 727-5477.

Signature Prefix (To be added to all applicable products, except where noted) Price

10- Signature System* Add 34.00 /cyl

Keying Charges & SubstitutionsMasterkeying charge is included in price of Removable Core cylinder (Prefix 10-63-)Double cylinder locks - Double below charges when purchased with locksets or exit devices

Masterkeying or Higher level of keying, any quantity Add 10.00 /cyl.Masterkeying or Higher level of keying, any quantity, cylinders only Add 10.00 /cyl.Construction Masterkeying with lockset or exit devices (Prefix 21-) Add 10.00 /cyl.Construction Masterkeying with lockset or exit devices, cylinders only (Prefix 21-) Add 10.00 /cyl.

KeysMasterkey and/or Grandmasterkey 10-6272 8.00 /keyConstruction Masterkey 10-14-0418 8.00 /key

Extra Keys (Cylinders are packed standard with 2 keys each)For each extra day key ordered with lockset, exit device or cylinder Add 7.50 /keyKeys packed separately (indicate appropriate “Ship To” address on keying cover sheet) Add 3.00 /cyl.

Keyblanks 50 Keys/Box. Must order multiple of 50 keys.Composite section 6 Pin 10-6270 3.13 / keyComposite section 6 Pin 10-6270 Unpublished restricted and “C” section 3.37 / keySingle section 6 Pin 10-6275 3.13 / keySingle section 6 Pin 10-6275 Unpublished restricted and “C” section 3.37 / keyKey Marking (Special marking is limited to space on blank side of keyblank)Stamping letters or numerals on key bow - add per each letter or numeral Add 1.00 /num“Do Not Duplicate” or other stamps on file at Sargent No AdditionWhere new special stamping is required i.e., “State of Alaska - Do Not Duplicate” Add 500.00 /dieKeys stamped from this special die on first order only Add 2.00 /keyVisual Key Control (When ordered with non-Signature product, the following applies to all)Signature Keys include visual key control (keys are stamped, cylinder face can not be stamped) N/CNon-Signature product requiring visual key control when ordered with Signature product See CK-3Concealed stamping of Rim or Mortise body Add 3.00Concealed stamping of 10-6300 slide Add 3.00Note: VKC not available with Signature plugsDelete Sargent Logo/Key SectionTo delete Sargent Logo and/or Key Section from Keys Add 1.00/KeyTo delete Sargent Logo from Mortise & Rim Cylinders Add 1.00/Cyl

*Note: Available in the following Sargent keyway families – L, R, N, K, (N & K are restricted keyways)For keyways C, G, and H contact the factory. (G is a restricted keyway)Refer to CK-3 for pricing and prior authorization requirements.


REMOVABLE CORE



Removable Core Cylinder (The Signature prefix add has already been included) Price

Number Specify Finish

10-6334, 10-6342, 10-6343, 10-6344, 10-6346 6 Pin only $131.00

Removable Cores Only (The Signature prefix add has already been included) Price

Assembled Specify Finish

10-6300 For All Except 50 Function $78.00

NOTE: 65- unassembled is not available with Signature cores. Available 1-bitted only.

*Mortise Cylinders with following Cams Price13-0806 Inside of 78/8216 + 96 function

13-0922 Key Switch Cam – 4370

13-0832 Adams Rite – 1850

13-0833 Adams Rite – 4050Add $5.31

13-0928 Schlage L

13-1251 Wide Straight Cam

* Cams must be ordered with cylinders – permanently attached at the factoryNote: Construction Cores are available. Refer to CK-2 for Policy & Pricing.If ordering in “C” or “H” and or “G” keyway family,please consult factory.

Parts Price13-0985 Blocking Bar (Old Style) $4.02 each13-1109 Blocking Bar (New Style) $10.45 each13-0986 Blocking Bar Spring $0.07 each13-0977 Body for 10-6300 $21.46 each13-0797 for 6300 made before 3/06 with box logo $0.29 each13-0976 Barrel for 10-6300 $54.44 each13-1074 Sleeve for 6300 & 10-6300 $18.64 each437S Signature Re-keying Kit $510.00 each437RC/UL* Re-keying Kit (Conventional & Signature) for removable Cores $239.00 each*This kit must be used in conjunction with our Signature re-keying kit 437S. UL Pins must be ordered separately.13-1037 Loading Rod Blade (Signature) $10.07 each13-1138 Loading Rod Blade (Signature) $10.07 each18-0070 Cylinder Spray Lube $16.06 each18-0435 Cylinder Cleaner/De-Icer $16.06 each

Signature Cylinder Pins (Optional for 437RC/UL kit)Stainless Pins (for UL437 Cylinders)Part. No. Size Price

13-1210 1

13-1211 2

13-1212 3

13-1213 4

13-1214 5

13-1215 6 2.55

13-1216 7

13-1217 8

13-1218 9

13-1222 B-Driver

13-1223 C-Driver

Note: To re-key existing UL437 Cylinders.

For Sargent 6300 Removable Core & SignatureRemovable Core—for 3rd & 4th positions:Part. No. Hollow Drivers Size Price

13-1229 3 $0.32

13-1234 4

13-1235 5

13-1236 6

13-1237 7 $0.16

13-1238 8

13-1239 9

13-1240 10

For Sargent 6300 Removable Core & SignatureRemovable Core—Parts:Part. No. Miscellaneous Price

13-0487 Hollow Driver Springs $0.63




MORTISE & RIM CYLINDERS



Mortise Cylinder 6 Pin(The Signature add is included)

Number Specify Finish Price

10-41, 10-42, 10-43, 10-44, 10-46 $87.00

10-48, 10-50, 10-52, 10-54, 10-56 $112.00

Note: Price does not include Masterkeying

Mortise Cylinders with following:

Cam No. Price

13-0512 Adams Rite (1850)

13-0513 Adams Rite (4050) Add $5.31

13-0938 Schlage L

13-0097 Misc. wide straight Add $5.31

13-0921 4370 key switch Add $5.31

Mortise Cylinder (10-40 Series) Plug & Sidepin

Ass’y Specify Finish Price

13-3835 41

13-3836 42

13-3837 43 $59.01

13-3838 44

13-3839 46

13-3840 48

13-3841 50

13-3842 52 $69.74

13-3843 54

13-3844 56

Mortise Cylinder(10-40 Series) Bodies

Number Specify Finish Price

13-3726 41

13-3727 42

13-3728 43 $31.86

13-3729 44

13-3730 46

13-3731 48

13-3732 50

13-3733 52 $45.93

13-3734 54

13-3735 56

Rim Cylinder Price

10-34 $87.00


Rim Cylinder (10-34 Series) Plug & Sidepin Ass’y Price

Specify Finish

13-3845 6 Pin $59.01


Rim Cylinder (10-34 Series) Cylinder Body Price

Specify Finish

13-3847 6 Pin $31.87

UL-437Listed SIGNATURE Security Cylinders

Number Specify Finish Description Price

10-UL34 Rim Cylinder $101.00

10-UL41, 10-UL 42, 10-UL43 Mortise Cylinder $101.00

10-UL44, 10-UL46 Mortise Cylinder $101.00

Note: Not available with 21-, 63-, 78-, 35- prefix or LE4 trim.

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D, 32, 32D, finishes. Cylinder plugs/barrelswill be in either US4 or 15. Specify finish when ordering.


BORED LOCK CYLINDERS & PARTSHOLDERS & STOPS



11 Line Cylinder Assemblies

Number Specify Finish US4 or 15 Price

13-4147 For all Except 50 Function $85.00

10, 8L, 7L, 6500 Lever Cylinder Assemblies



8, 9 Knob Line Cylinder Assemblies



6 Line Cylinder Assemblies


13-3814 6 Pin (S and N Knobs) For All Except 50 Function

13-3815 6 Pin (B Knob) For All Except 50 Function$85.00

Auxiliary Locks Cylinder Assemblies


13-3857 484

13-3858 485, 487

13-3859 486 $85.00

13-3861 464, 474

13-3862 465, 475

Note: Above Cylinder Assembly prices do not include masterkeying.

7600 Integralock Cylinders (All functions except 26, 27, and 50)

Part # Specify Finish US4 or 15 Price

13-3990 Signature $112.00

13-3991 Signature with 21- prefix (lost ball) $132.00

Bored Lock Cylinder Plug & Sidepin Assemblies

Plug No. Specify Finish US4 or 15 Price

13-3851 For 8L, 10, 11, 6500, 6L Lever Lines

13-3850 For 8, 9 Knob Lines $59.01

13-3849 For 460, 480 Series

Bored Lock Cylinder Body

Cyl. Body No. Price

13-3710 For 6L, 8L, 10, 11, 6500 Lever Lines

13-3852 For 8, 9 Knob Lines $29.50

13-3854 For 460/480 Series


SARGENT V-10



Keying Charges & Cut Keys: Price

Master keying charge $10.00 per cylinderV-10 Cut master keys 6272-V $13.50 each

V-10 Cut day keys 6277-V $13.50 each

V-10 Keyblanks with sidebar code (100 box) 18-0093 (Minimum order 100 each) $4.50 each

PrefixVA = Standard

VC = Interchangeable Core

VS = Standard Sub-Assembled – supplied without sidebar & sidebar springs. Side pins and side pin springs are included.

VCVS = Interchangeable Core Sub-Assembled – supplied without sidebar & sidebar springs. Side pins and side pin springs are included.

Finish Mortise & Rim Cylinders - US3, US4, US10, US10B, US26, US26D (for other finishes, please consult factory)Bored Cylinders - US4, US15Refer to CK-37 for V10 Pricing Example

V-10 TEMPORARY CONSTRUCTION CORE

(V-10) The customer will be invoiced at $44.00 NET/NET per construction core and the full invoice must be paid according toSARGENT’s standard terms. No further discount will be applied. When construction cores are to be returned, the distributor mustcontact Customer Service for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $22.00 credit for each construction core returned from the specified project. Construction master and control keys are to be ordered separately when needed by part numbers below.

Extra Keys (Cylinders are packed standard with 2 keys each)

For each extra day key ordered with cylinder $13.50

Keys packed separately (indicate appropriate “Ship To” address on keying cover sheet) $3.00 Cylinder

Construction Cores & Keys

Part# Description Price

18-2077 Construction Red Core $88.00

18-2078 Control Key $13.50

18-2079 Master Construction Key $13.50

Note: V-10 cylinders and cut keys and keyblanks are not available less logo.

VKC not available with V-10 plugs and bodies.


Note: Restricted V-10 products require a signed end-user agreement and letters of authorization for subsequent orders.


SARGENT V-10



SARGENT V-10 1 1/8" Mortise Cylinders Prefix

Suffix Specify Finish VA VC VS VCVS41 SARGENT Standard cam41 -8 w/SARGENT Short cam41 -101 w/Adams Rite 1850 cam41 -103 w/Corbin Clover Leaf cam41 -106 w/Schlage "L" cam41 -107 w/Corbin Beaver Tail cam $96.50 NA $80.00 NA41 -108 w/Yale Standard cam41 -109 w/Best 30H Clover Leaf cam41 -110 w/Airteq cam41 -111 w/Segal Type cam

SARGENT V-10 1 1/4" Mortise Cylinders VA VC VS VCVS42 Specify cam type as above $97.50 $141.50 $81.00 $127.00

SARGENT V-10 1 3/8" Mortise Cylinders VA VC VS VCVS43 Specify cam type as above $182.00 N/A $167.50 N/A





SARGENT V-10 2" Mortise Cylinders VA VC VS VCVS48 Specify cam type as above $206.00 N/A $191.50 N/A

SARGENT V-10 Rim Cylinders Specify Finish VA VC VS VCVS34-S Horizontal Tailpiece w/SARGENT thru-bolt locations $127.00 $149.00 $112.00 $134.5034-V Vertical Tailpiece w/ASSA thru-bolt locations $127.00 $149.00 $112.00 $134.5034-L Lazy motion Tailpiece w/ASSA thru-bolt locations $127.00 $149.00 $112.00 $134.50

SARGENT Bored Lock Cylinders Specify Finish VA VSC8 Sargent 7, 8, & 9 Line knob locksets $88.50 $74.00 C10 Sargent 6 Line Knob, 6500, 7L, 10L lever locksets $88.50 $74.00 C11 Sargent 11L Lever Lockset $88.50 $74.00 C480 Sargent 480 Series bored deadlock $88.50 $74.00 C7600 Sargent 7600 Integra lock $97.50 $83.00


SARGENT V-10



Prefix

SARGENT Mortise Cylinders Specify Finish VA VC VS VCVS

7551 1-1/8" long Corbin Jumbo (1 1/2" Dia.) $177.50 $173.00 $163.00 $158.50

8551 1-1/4" long Mogul Detention (2" Dia.) $169.00 N/A $154.50 N/A

Prefix

Rim Cylinders Specify Finish VA VC VS VCVS

7552-H Corbin Jumbo (1-1/2" Dia.)(Horizontal Tailpiece with ASSA thru-bolt locations) $181.50 N/A $167.00 N/A

7552-V Corbin Jumbo (1-1/2" Dia.)(Vertical Tailpiece with ASSA thru-bolt locations) $181.50 N/A $167.00 N/A

7552-L Corbin Jumbo (1-1/2" Dia.)(Lazy Motion Tailpiece with ASSA thru-bolt locations) $181.50 N/A $167.00 N/A

8551-H Mogul Detention (2" Dia.)(Horizontal Tailpiece with ASSA thru-bolt locations) $176.50 N/A $162.00 N/A

8551-V Mogul Detention (2" Dia.)(Vertical Tailpiece with ASSA thru-bolt locations) $176.50 N/A $162.00 N/A

8551-L Mogul Detention (2" Dia.)(Lazy Motion Tailpiece with ASSA thru-bolt locations) $176.50 N/A $162.00 N/A

Prefix

SARGENT Bored Lock Cylinders Specify Finish VA VS

Arrow 65674 (6 pin bored deadlocks)Arrow 65691 (6 pin cylindrical locksets)Cor/Rus 65651 (New style heavy duty cylindrical locksets) $88.50 $74.00 Cor/Rus 65652 (New style standard duty cylindrical locksets)Cor/Rus 65653 (#19F35 Cylinder)Cor/Rus 65654 (#24F15, #25F26, #55F75 & #67F69 Cylinders)Cor/Rus 65655 (#25F65 Cylinder) $97.50 $83.00 Falcon 65661 (S series standard duty & X series heavy duty locksets)Schlage 65611 (Standard, Heavy duty cylindrical locksets & B series deadlocks) $88.50 $74.00 Weiser 65681 (4000 & 9000 series single cylinder deadlocks) $97.50 $83.00 Weiser 65682 (4000 & 9000 series double cylinder deadlocks)Yale 65631 (6 pin standard and heavy duty cylindrical knob locksets)

$88.50 $74.00 Yale 65632 (Heavy duty 5400 series cylindrical lever locksets)

Prefix

**Heavy Duty Deadlocks Specify Finish VA VC VS VCVS

584OS – Outside cylinder only $123.50 $203.00 $109.00 $188.50 584IS – Inside cylinder only $123.50 $203.00 $109.00 $188.50 584 Double cylinder (2-3/4" B.S. with rectangular faceplate) $257.50 N/A $240.00 N/A20-584 Double cylinder (2-3/8" B.S. with rectangular faceplate) $257.50 N/A $240.00 N/A29-584 Double cylinder (2-3/4" B.S. with 1-1/8" drive bolt) $257.50 N/A $240.00 N/A20-29-584 Double cylinder (2-3/8" B.S. with 1-1/8" drive bolt) $257.50 N/A $240.00 N/A585 Single cylinder (2-3/4" B.S. with rectangular faceplate) $197.00 $226.00 $183.00 $211.50 20-585 Single cylinder (2-3/8" B.S. with rectangular faceplate) $197.00 N/A $183.00 N/A29-585 Single cylinder (2-3/4" B.S. with 1-1/8" drive bolt) $197.00 N/A $183.00 N/A20-29-585 Single cylinder (2-3/8" B.S. with 1-1/8" drive bolt) $197.00 N/A $183.00 N/A**AVAILABLE WITH V-10 CYLINDERS ONLY

Removable Core Only (Does Not Include Master Keying Charge) Specify Finish VC VCVS

7300 $88.00 $75.50


SARGENT V-10



PrefixPadlocks VA VC VS VCVS

C957 Padlock Cylinder Only $69.50 N/A $55.00 N/A

957 (1" non key-retaining shackle) $103.00 N/A $88.50 N/A

957-KR (1" key-retaining shackle) $103.00 $129.00 $88.50 $114.50

967 (2" non key-retaining shackle) $110.00 N/A $95.50 N/A

967-KR (2" key-retaining shackle) $110.00 $141.50 $95.50 $127.00

Keying Components per bag Spool Driver Pin Per 100 Pieces Qty-Pkg

18-0040 (Minimum order quantity 100 each) 1-2 (A)

18-0041 (Minimum order quantity 100 each) 3-4 (B)

18-0042 (Minimum order quantity 100 each) 5-6 (C) $29.00 100

18-0043 Minimum order quantity 100 each) 7-8-9 (D)

Part No. Bottom (Key) Pin Size Per 100 Pieces Qty-Pkg

18-0052 (Minimum order quantity 100 each) 1




18-0056 (Minimum order quantity 100 each) 5 $29.00 100





Part No. Master Pins (Splits) Size Per 100 Pieces Qty-Pkg




18-0047 (Minimum order quantity 100 each) 4 $29.00 100





Part No. V-10 Side Pins Per 100 Pieces Qty-Pkg

18-0061 (Minimum order quantity 100 each) Left Hand $105.00 50

18-0062 (Minimum order quantity 100 each) Right Hand $105.00 50

Part No. Cylinder Springs Price Qty-Pkg

18-0063 (Minimum order quantity 100 each) Cylinder Top Springs $29.00 /100 100

18-0064 (Minimum order quantity 100 each) V-10 Side Pin Springs $17.00 /100 100

18-0065 (Minimum order quantity 25 each) V-10 Sidebar Springs $17.00 /100 25

18-0090 (Minimum order quantity 25 each) V-10 Sidebar $8.75 each 25

437V Keying Kit $759.00 each

437V-PKIC Upgrade Keying Kit for use with 437V kit when pinning V10 Interchangeable Core (VC VCVS) $689.00

437V-MPK Master Kit for V10 Keying Kit (VA VC VCVS) $1,354.00

Part No. IC Top Pins Size Price Per 100 Pieces Qty-Pkg

18-0331 Minimum order quantity 100 each 218-0332 Minimum order quantity 100 each 318-0333 Minimum order quantity 100 each 418-0334 Minimum order quantity 100 each 518-0335 Minimum order quantity 100 each 6 $24.00 10018-0336 Minimum order quantity 100 each 718-0337 Minimum order quantity 100 each 818-0338 Minimum order quantity 100 each 918-0339 Minimum order quantity 100 each 10

Part No. IC Master Pins Size Price Per 100 Pieces Qty-Pkg

18-0356 Minimum order quantity 100 each 918-0340 Minimum order quantity 100 each 1018-0341 Minimum order quantity 100 each 1118-0342 Minimum order quantity 100 each 1218-0343 Minimum order quantity 100 each 13 $24.00 10018-0344 Minimum order quantity 100 each 1418-0345 Minimum order quantity 100 each 1518-0346 Minimum order quantity 100 each 1618-0347 Minimum order quantity 100 each 1718-0348 Minimum order quantity 100 each 118-0349 Minimum order quantity 100 each 218-0350 Minimum order quantity 100 each 318-0351 Minimum order quantity 100 each 418-0352 Minimum order quantity 100 each 5 $24.00 10018-0353 Minimum order quantity 100 each 618-0354 Minimum order quantity 100 each 718-0355 Minimum order quantity 100 each 8 Part No.IC Miscellaneous Parts Price

18-0070 V-10 Cylinder Spray Lube $16.50 18-0321 V-10 IC Shell Only $57.50 18-0322 V-10 IC C Ring $0.65 18-0323 V-10 IC Control Sleeve $38.00 18-0324 V-10 IC Core Housing Only $57.50 18-0325 V-10 IC Closing Strip $1.20 18-0326 V-10 IC Rubber Stop $1.60 18-0327 V-10 IC plug $26.50 18-0328 V-10 IC Cam Adaptor $26.00 18-0329 V-10 IC Wave Washer $1.15 18-0330 V-10 IC Plug Washer $0.90 18-0357 V-10 IC Core Chamber Spring $0.23


SARGENT V-10




SARGENT V-10



Part No. V-10 Cylinder Plug Price

18-0007 V-10 Plug 8 & 9 Line $35.00 18-0010 V-10 Plug 6L, 10, 11 & 6500 $30.00 18-0016 V-10 Plug (480) $28.00 18-0029 V-10 Plug (Mortise/Rim) $25.00 18-0030 V-10 Plug VA42 $25.00 18-0031 V-10 Plug VA43 $28.50 18-0032 V-10 Plug VA44 $32.50 18-0033 V-10 Plug VA45 $35.00 18-0034 V-10 Plug VA46 $38.00 18-0035 V-10 Plug VA47 $41.50 18-0036 V-10 Plug VA48 $45.00 18-0037 V-10 Plug (Mortise/Rim) $25.00

Part No. V-10 Cylinder Body Price

18-0008 V-10 Body 8 & 9 Line $35.00 18-0011 V-10 Body 6L, 10, 11 & 6500 $35.00 18-0017 V-10 Body (480) $35.00 18-0020 V-10 Body VA41 $56.50 18-0021 V-10 Body VA42 $56.50 18-0022 V-10 Body VA43 $90.00 18-0023 V-10 Body VA44 $91.00 18-0024 V-10 Body VA45 $94.00 18-0025 V-10 Body VA46 $98.00 18-0026 V-10 Body VA47 $101.00 18-0027 V-10 Body VA48 $105.00 18-0028 V-10 Body VC42 $64.50 18-0038 V-10 Body VA34 $89.50 18-0039 V-10 Body VC34 $64.50 18-2075 V-10 IC Mortise Cyl. Hsg. $53.50 18-2095 V-10 IC Mort. Cyl. Hsg. w/AR caV-10 M $53.50 18-2096 V-10 IC Mort. Cyl. Hsg. w/Corbin Clover Leaf cam $53.50 18-2097 V-10 IC Mort. Cyl. Hsg. w/Corbin Beaver Tail cam $53.50 18-2098 V-10 IC Mort. Cyl. Hsg. w/Yale Standard cam $53.50 18-2099 V-10 IC Mort. Cyl. Hsg. w/Schlage L cam $53.50 18-2100 V-10 IC Rim Cyl. Hsg. w/Hor. Tl.pc. Cam $60.50 18-2101 V-10 IC Rim Cyl. Hsg. w/vert. Tl pc. Cam $60.50

Part No. Cams (for use with V-10 cylinders only) Price Qty-Pkg

18-0076 ARC (VA-41) $5.20 18-0077 Standard SARGENT Cam (VA-41) $5.20 18-0078 Cloverleaf Cam (VA-41) $5.20 18-0079 V-10 Corbin Beaver Tail Cam (-107) $5.20 18-0080 V-10 Yale Standard Cam (-108) $5.20 18-0081 V-10 Schlage L Cam (-106) $12.50 1018-0082 V-10 Segal Type Cam (-111) $12.50 18-0083 V-10 Corbin Jumbo Cam $12.50 18-0084 V-10 Best 30H Cam (-109) $12.50 18-0232 V-10 Mogul Cyl. Cam (M9200) $12.50

V-10 PRICING EXAMPLE: VA8205 LNL X 26D X 3 KEYS

A. 8205 LNL X 26D $583.00 (REFER TO ML-5)

B. FULL CYLINDER DEDUCT (#41 CYL) ($53.00) (REFER TO CK-3)

LIST PRICE $530.00

C. 50/25% DISCOUNT FROM LIST ($331.00) $199.00

D. VA-41 CYLINDER $96.50 (REFER TO CK-32)

E. MASTERKEYING $10.00 (REFER TO CK-31)

F. EXTRA CUT KEY $13.50 (REFER TO CK-31)

LIST PRICE $120.00

H. 50% DISCOUNT FROM LIST ($60.00) $60.00

TOTAL NET/NET PRICE $259.00

Part No. Description Price

18-0009 V-10 Retainer 8 & 9 Line $0.60 18-0012 V-10 Retainer 6L, 10 & 6500 $0.60 18-0013 V-10 Tail Pc. 6L "S" Knob $2.60 18-0014 V-10 Tail Pc. 6L "B" Knob $2.60 18-0015 V-10 Tail Pc.10 & 6500 $2.10 18-0018 V-10 Cap (480) $2.60 18-0066 V-10 Cutter Wheel-HPC 1200 $423.50 18-0067 V-10 Cutter Wheel PS6000T $349.00 18-0068 V-10 Code Card HPC 12CM $39.00 18-0069 V-10 Mortise Cutaway $187.00 18-0070 V-10 Spray Lube $16.50 18-0071 V-10 Tl Pc. Retainer 6L, 10 & 6500 $0.60 18-0072 V-10 Closure Strip $0.60 18-0073 V-10 Standard Tl. Pc. & Cam Screw $1.20 18-0133 Rim Tail Piece $7.00 18-0134 Lazy Rim Tail Piece $6.75 18-0135 Pin Chamber Closer Screw (min. order 100 each) $0.90 18-0136 Rim Cylinder Screws $1.05 18-0138 Deadbolt Mount Ring $15.50 18-0140 1 3/8" Space Ring $27.00 18-0141 2 1/8" Adaptor Ring $21.50 VA806267 V-10 Cyl. Ring $34.50 VA907001 V-10 Deadbolt 2 3/4" (Face plate) $104.00 VA907002 V-10 Deadbolt 2 3/4" (Drive In) $104.00 VA907003 V-10 Deadbolt 2 3/8" (Face plate) $104.00 VA907004 V-10 Deadbolt 2 3/8" (Drive In) $104.00 VA907005 V-10 Deadbolt Strike Plate $17.00 VA907007 V-10 Reinforced Strike Box & Screws $20.50 VA907008 V-10 Bolt Guard Plate $3.50

Key Machine

18-0139 V-10 Key Machine – Manual $5,743.00


SARGENT V-10



BORED LOCKS

TABLE OF CONTENTS



Bored Locks - How to Order ..................................BL-1

T-Zone (11 Line)..........................................BL-2 - BL-21

T-Zone Prefixes.........................................................................BL-2

T-Zone B, L, P Levers ...............................................................BL-3

T-Zone Prefixes.........................................................................BL-4

T-Zone J Levers ........................................................................BL-5

T-Zone Lock Body Assemblies .................................................BL-6

T-Zone Lockbody Assemblies Rem. (60-) & IC (70-) ................................................................BL-7

T-Zone Lockbody Assemblies 82- KESO..................................BL-8

T-Zone Lockbody Assemblies V-10...........................................BL-9

T-Zone SL Lockbody Assemblies ...........................................BL-10

T-Zone SL Lockbody Assemblies Rem. (60-) & IC (70-) ..............................................................BL-11

T-Zone SL Lockbody Assemblies 82-KESO ...........................BL-12

T-Zone SL Lockbody Asemblies VC & VCVS V-10.................BL-13

T-Zone Levers & Roses ..........................................................BL-14

T-Zone SL Levers....................................................................BL-15

T-Zone Locking Sleeve Assemblies Standard Cyl.Functions, 63- or 73- IC..........................................................BL-16

T-Zone Locking Sleeve Assemblies 82-KESO, V-10 IC, Non-Locking Sleeve Assemblies ............................................BL-17

T-Zone Locking Sleeve Assemblies Standard Cyl.Functions, 63- or 73- IC..........................................................BL-18

T-Zone Locking Sleeve Assemblies 82-KESO, V-10 IC ..........BL-19

T-Zone Latch & Bearing Assemblies ......................................BL-20

T-Zone Parts ...........................................................................BL-21

10-Line Grade 1 Lever Lock ....................BL-22 - BL-33

10-Line Prefixes......................................................................BL-22

10-Line: B, L, P Levers ...........................................................BL-23

10-Line Prefixes......................................................................BL-24

10-Line: J Lever ......................................................................BL-25

10-Line Coastal Series Prefixes .............................................BL-26

10-Line Coastal Series Y, G Levers ........................................BL-27

10-Line Levers ........................................................................BL-28

10-Line Coastal Series Levers................................................BL-29

10-Line Roses, Latches, Assemblies......................................BL-30

10-Line Lockbody Assemblies ................................................BL-31

10-Line FW Lockbody Assemblies .........................................BL-32

10-Line Parts ..........................................................................BL-33

7-Line Grade 2 Lever Lock ......................BL-34 - BL-41

7-Line Prefixes........................................................................BL-34

7-Line: B, L, P Levers .............................................................BL-35

7-Line Coastal Series Prefixes ...............................................BL-36

7-Line Coastal Series Y, G Levers ..........................................BL-37

7-Line Levers ..........................................................................BL-38

7-Line Coastal Series Levers..................................................BL-39

7-Line Lockbody Assemblies ..................................................BL-40

7-Line Rose/Latches/Parts .....................................................BL-41

7500-Interconnected Lock.....................BL-42 to BL-43

7500-Line Prefixes..................................................................BL-42

7-Line: K, L, P, Y Levers..........................................................BL-43

6500-Line Grade 2 Lever Cylindrical Lock ..........BL-44

GX Series................................................................BL-45

DL Series ................................................BL-46 to BL-49

DL Series - Studio Collection Metro Elements-Centro, Odeon Series .............................................................BL-46

DL Series - Studio Collection Metro Elements - Aventura,, Notting Hill, Rialto Series.......................................BL-47

DL Series - Coastal Series .....................................................BL-48

DL Series - A, B, E, F, J, L, P, W Levers.................................BL-49

8-Line Grade 1 Knob Lock ......................BL-50 - BL-578-Line Prefixes........................................................................BL-50

8-Line B, C Knobs ..................................................................BL-51

8-Line Kits/Strikes...................................................................BL-52

8-Line Latches/Roses .............................................................BL-53

8-Line Knob Assemblies .........................................................BL-54



8-Line Parts ............................................................................BL-57

6-Line Grade 2 Knob & Lever Lock ........BL-58 - BL-616-Line Prefixes........................................................................BL-58

6-Line – Knob Design .............................................................BL-59

6-Line Latches/Parts...............................................................BL-60

6-Line Parts ............................................................................BL-61

5500 Cylindrical Knob Lock..................................BL-62

BL-1BORED LOCKS



FunctionSARGENT ANSI

U15 F75

U65 F76

G75 F78

G75-2 F79

G30 F80

G05 F81

G24 F82

G37 F84

G87 F85

G04 F86

G17 F87

G16 F88

G13 F89

G54 F90

G26 F91

G44 F92

G50 F93

How to Order

Step Description Example

Quantity Each 10 Ea.

Prefix Consult catalog for prefixes available 10 Ea. 28-

Line 11, 10, 9, 8, 7, 6, 3, 6500, 5500 10 Ea. 28- 11

Function Consult catalog for functions available 10 Ea. 28- 11G05

Design Consult catalog for designs available 10 Ea. 28- 11G05 LL

Finish Consult catalog for finishes available 10 Ea. 28- 11G05 LL US26D

Hand Consult catalog for handing requirements 10 Ea. 28- 11G05 LL US26D RH

Split Finishes Specify outside finish first 10 Ea. 28- 11G05 LL US26D/10B

FinishSARGENT ANSI Description

US3 605 Polished Brass

US4 606 Satin Brass

US9 611 Polished Bronze

US10 612 Satin Bronze

US10B 613 Oxidized Satin Bronze / Oil Rubbed

US10BL 616 Oxidized Satin Bronze / Lacquered

US15 619 Satin Nickel Plate

US20D 622 Dark Statuary Bronze / Powder coated

US26 625 Polished Chrome

US26D 626 Satin Chrome

US32 629 Polished Stainless Steel

US32D 630 Satin Stainless Steel

NL NO LACQUER

ANSI Finish and Function Comparison

Notes:

For locks with non-ferrous material for marine use, please contact the factory.

BL-2BORED LOCKS

PREFIXES



PrefixNumber Description Price

10s SARGENT Signature Key System Add $34.00 / cyl.11s SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key system only Add $10.00 / cyl.23 Lockset x 3-3/4" Backset Add $10.00 25 Lockset x 5" Backset Add $16.00 28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard

Lip Lengths 1-1/8" or 1-3/8" No addition Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Add $10.00

30s Lever to accept Schlage cylinder - no cylinder provided No addition 31s For special thickness doors (Specify thickness) Doors 2" and over Consult Factory 36 6 Lobe security head screws Add $12.00 37 Spanner head screws Add $8.00 41s Lockset x 3/4" Throw (04, 05, 15, 15-3, 16, 37, 38 Functions) Add $48.00 60s SARGENT Removable Disposable Construction Core No addition 63s SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges.64s SARGENT Removable Construction Core Cylinder See CK-2 6573s Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s Small Format Interchangeable disposable plastic construction core No addition 72s Small Format Interchangeable 6-pin Construction Core (7-Pin w/11- prefix) See page CK-2 73s Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.737Ps Small Format Interchangeable Core, 7-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock75 Milled Inside Lever Add $26.00 76 Milled Outside Lever Add $26.00 77 Milled Both Levers Add $52.00 80s Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182s SARGENT KESO Security Cylinder – patented –New Key Systems Add $47.00 /cyl.82s SARGENT KESO Security Cylinder (existing Key Systems only) Add $47.00 /cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SCs Schlage C keyway cylinder “0” bitted No addition SEs Schlage E keyway cylinder “0” bitted No addition SG MicroShield™ – an antimicrobial powder coat Add $21.00 SL High Security Lever attachment (not available on non-keyed functions) No addition VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs SARGENT V-10 Interchangeable Core Cylinder See V-10 Cylinder SectionVCVSs SARGENT V-10 Interchangeable Core Cylinder Unassembled See V-10 Cylinder SectionVSs SARGENT V-10 Standard Sub-Assembled Cylinder See V-10 Cylinder Section

s Prefixes not available in 50 function.

SuffixCPC Clear Powder Coat over 26D – 11G05 x OL x 26D x CPC Add $31.00

All orders will continue to be handled as a “special” when CPC is ordered. Discounts do not apply

BL-3BORED LOCKS

LEVERS



11G04 Storeroom/Closet

11G05 Entry/Office

11G37 Classroom

11G24 Entry

11G44 Service Station

11G54 Dormitory

11G50 Hotel

Double Cylinder

11G16 Classroom Security/Public Entrance

11G17 Utility/Asylum/Institutional

11G30 Communicating

11G38 Classroom Security

Non Keyed

11U15 Passage

11G13 Exit

11G15-3 Exit

11U65 Privacy

11U68 Hospital/Privacy

11U93 Dummy Trim

11U94 Dummy Trim

11U94-2 Dummy Trim

$454.00 $463.00 $472.00

$486.00 $499.00 $509.00

$495.00 $506.00 $515.00

$525.00 $534.00 $545.00

$342.00 $350.00 $364.00

$399.00 $411.00 $420.00

$124.00 $129.00 $134.00

$249.00 $258.00 $268.00

$258.00 $268.00 $278.00

OL EB BP

Function Finish

Single Cylinder 26D 04, 10, 10B, 20D 3, 9, 26, 10BL, 15

Rose Design:O Rose - 2-3/4" Dia. – ShownB Rose - 2-3/4" Dia. – ShownL Rose - 3-1/2" Dia.

* E Rose - 3-1/8" Sq. – Shown

* “E” Roses add $4.00 per rose.

Note: Split finishes are available. Order outside/inside, price as higher finish.

Strikes – See catalog for available lip lengths Specify Finish

800 ANSI A115.2 T Strike (Standard)

Lip Lengths available: 7/8", 1", 1-1/4" (Standard), 1-1/2", 1-3/4", 2" Refer to page BL-52

808 ANSI A115.2 – 4-7/8" Strike (Prefix 28-)

Lip Lengths available: 1-1/8", 1-1/4" (Standard), 1-3/8", 1-5/8", 1-7/8",

2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52

08-0055 Strike Box (Standard) $3.37

77-1141 Strike Box (Prefix 28-) $3.50

Lever Design:B – ShownL – ShownP – Shown



BL-4BORED LOCKS

PREFIXES


10s SARGENT Signature Key System Add $34.00 / cyl.11s SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, KESO, SE, SC, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key system only Add $10.00 / cyl.23 Lockset x 3-3/4" Backset Add $10.00 25 Lockset x 5" Backset Add $16.00 28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard


30s Lever to accept Schlage cylinder - no cylinder provided No addition 31s For special thickness doors (Specify thickness) Doors 2" and over Consult Factory 36 6 Lobe security head screws Add $12.00 37 Spanner head screws Add $8.00 41s Lockset x 3/4" Throw (04, 05, 15, 15-3, 16, 37, 38 Functions) Add $48.00 60s SARGENT Removable Disposable Construction Core No addition 63s SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges.64s SARGENT Removable Construction Core Cylinder See CK-2 6573s Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s Small Format Interchangeable disposable plastic construction core No addition 72s Small Format Interchangeable 6-pin Construction Core (7-Pin w/11- prefix) See page CK-2 73s Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)


Includes MK and GMK keying charges Add $40.00 / cyl.74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock75 Milled Inside Lever Add $26.00 76 Milled Outside Lever Add $26.00 77 Milled Both Levers Add $52.00 80s Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182s SARGENT KESO Security Cylinder – patented– new key systems Add $47.00 /cyl.82s SARGENT KESO Security Cylinder – existing systems only Add $47.00 /cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SCs Schlage C keyway cylinder “0” bitted No addition SEs Schlage E keyway cylinder “0” bitted No addition SG MicroShield™ – an antimicrobial powder coat $21.00 SL High Security Lever attachment (not available on non-keyed functions) No addition VCVSs SARGENT V-10 Interchangeable Core unassembled See V-10 Cylinder SectionVCs SARGENT V-10 Interchangeable Core cylinder See V-10 Cylinder SectionVAs SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVSs SARGENT V-10 Standard Sub-Assembled Cylinder See V-10 Cylinder Section

s Prefixes not available in 50 function.SuffixCPC Clear Powder Coat over 26D – 11G05 x LJ x 26D x CPC Add $31.00




BL-5BORED LOCKS

LEVERS

LJ


11G05 Entry/Office

11G37 Classroom

11G24 Entry


11G54 Dormitory

11G50 Hotel

Double Cylinder



11G30 Communicating


Non Keyed

11U15 Passage

11G13 Exit

11G15-3 Exit

11U65 Privacy

11U68 Hospital/Privacy

11U93 Dummy Trim

11U94 Dummy Trim

11U94-2 Dummy Trim

$465.00 $476.00 $486.00

$501.00 $511.00 $519.00

$509.00 $517.00 $529.00

$536.00 $548.00 $556.00

$354.00 $367.00 $378.00

$414.00 $422.00 $435.00

$130.00 $135.00 $140.00

$260.00 $270.00 $282.00

$270.00 $282.00 $292.00

Function Finish

Single Cylinder 26D 04, 10, 10B, 20D 3, 9, 26, 10BL, 15

Rose Design:O Rose - 2-3/4" Dia.B Rose - 2-3/4" Dia.L Rose - 3-1/2" Dia. – Shown

* E Rose - 3-1/8" Sq.

* “E” Roses add $4.00 per rose.

Lever Design:J – Shown

Note: Split finishes are available. Order outside/inside, price as higher finish.

Strikes – See catalog for available lip lengths Specify Finish





2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52





BL-6BORED LOCKS

LOCK BODY ASSEMBLIES

Lock Body Assemblies - For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS

Part No Function Price

11-2294 04* 11-2295 05 $280.66

11-2304 37* 11-2301 24* 11-2305 44 $303.82 * 11-2307 54* 11-2306 50 $309.60

11-2299 1611-2300 17 $326.97 11-2303 3011-2311 3811-2297 15 $208.33 11-2296 1311-2298 15-3 $245.94

* 11-2308 65, 68

Lock Body Assemblies - 31- Prefix For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS


11-2320 04* 11-2321 05 $358.80

11-2329 37* 11-2327 24* 11-2330 44 $381.95 * 11-2332 54* 11-2331 50 $387.72

11-2325 1611-2326 17 $405.08 11-2328 3011-2334 3811-2323 15 $286.45 11-2324 15-3

* 11-2333 65, 68 $324.07

Lock Body Assemblies - 41- Prefix For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS


11-2337 04* 11-2338 05 $321.16

11-2342 3711-2341 16 $367.46 11-2340 15-3 $286.45 11-2339 15 $248.83

Note: Lockbodies are shipped with bearing assembly, inside & outside sleeve, and inside & outside collar.* Specify finish when ordering.

BL-7BORED LOCKS




Lock Body Assemblies - For Removable (60-) and Interchangeable Core (70-) Cylinder FunctionsPart No Function Price

11-2349 04* 11-2350 05 $289.35

11-2355 37* 11-2353 24* 11-2356 44 $312.49 * 11-2358 54

11-2351 1611-2352 17 $335.64 11-2354 3011-2361 38

Lock Body Assemblies - 31- Prefix - For Removable (60-) and Interchangeable Core (70-) Cylinder FunctionsPart No Function Price

11-2366 04* 11-2367 05 $367.46

11-2372 37* 11-2370 24* 11-2374 44 $390.61 * 11-2375 54

11-2368 1611-2369 17 $413.76 11-2371 3011-2373 38

Lock Body Assemblies - 41- Prefix - For Removable (60-) and Interchangeable Core (70-) Cylinder FunctionsPart No Function Price

11-2380 04* 11-2381 05 $329.85

11-2383 37* 11-2382 16 $376.15


BL-8BORED LOCKS




Lock Body Assemblies - For 82- KESO cylinder functions


11-2426 04* 11-2427 05 $295.13

11-2432 37* 11-2430 24* 11-2434 44 $318.28 * 11-2435 54

11-2428 1611-2429 17 $341.42 11-2431 3011-2433 38

Lock Body Assemblies - For 31- Prefix - For 82- KESO cylinder functions


11-2507 04* 11-2508 05 $373.25

11-2513 37* 11-2511 24* 11-2515 44 $396.40 * 11-2516 54

11-2509 1611-2510 17 $419.54 11-2512 3011-2514 38

Lock Body Assemblies - For 41- Prefix - For 82- KESO cylinder functions


11-2585 04* 11-2586 05 $335.64

11-2588 37* 11-2587 16 $381.95


BL-9BORED LOCKS




Lock Body Assemblies - For VC and VCVS V-10 cylinder functions


11-2388 04* 11-2389 05 $289.35

11-2394 37* 11-2392 24* 11-2396 44 $312.49 * 11-2397 54

11-2390 1611-2391 17 $335.64 11-2393 3011-2395 38

Lock Body Assemblies - For 31- Prefix - For VC and VCVS V-10 cylinder functions


11-2404 04* 11-2405 05 $367.46

11-2410 37* 11-2408 24* 11-2412 44 $390.61 * 11-2413 54

11-2406 1611-2407 17 $413.76 11-2409 3011-2411 38

Lock Body Assemblies - For 41- Prefix - For VC and VCVS V-10 cylinder functions


11-2418 04* 11-2419 05 $329.85

11-2421 37* 11-2420 16 $376.15

Note: Lockbodies are shipped with bearing assembly, inside & outside sleeve, and inside & outside collar.* Specify finish when ordering



BL-10BORED LOCKS

SL LOCK BODY ASSEMBLIES

SL-Lock Body Assemblies - For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS-


11-2672 04* 11-2673 05 $280.66

11-2678 37* 11-2676 24* 11-2680 44 $303.82 * 11-2682 54* 11-2681 50 $309.60

11-2674 1611-2675 17 $326.97 11-2677 3011-2679 38

SL-Lock Body Assemblies - 31- Prefix For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS-


11-2685 04* 11-2686 05 $358.80

11-2691 37* 11-2689 24* 11-2693 44 $381.95 * 11-2695 54* 11-2694 50 $387.72

11-2687 1611-2688 17 $405.08 11-2690 3011-2692 38

SL-Lock Body Assemblies - 41- Prefix For non-cylinder and standard cylinder and 10-, 21-, 22-, 30- SC-, SE, SE, VA, VS-


11-2696 04* 11-2697 05 $321.16

11-2699 3711-2698 16 $367.46




BL-11BORED LOCKS

SL-LOCK BODY ASSEMBLIES

SL-Lock Body Assemblies - For removable (60-) core cylinder functionsPart No Function Price

11-2700 04* 11-2701 05 $289.35

11-2706 37* 11-2704 24* 11-2708 44 $312.50 * 11-2709 54

11-2702 1611-2703 17 $335.64 11-2705 3011-2707 38

SL-Lock Body Assemblies - 31- Prefix - For removable (60-) core cylinder functionsPart No Function Price

11-2712 04* 11-2713 05 $367.46

11-2718 37* 11-2716 24* 11-2720 44 $390.61 * 11-2721 54

11-2714 1611-2715 17 $413.76 11-2717 3011-2719 38

SL-Lock Body Assemblies - 41- Prefix - For removable (60-) core cylinder functionsPart No Function Price

11-2722 04* 11-2723 05 $329.85

11-2725 37* 11-2724 16 $376.15

SL-Lock Body Assemblies - For interchangeable (70-) core cylinder functionsPart No Function Price

11-2775 04* 11-2776 05 $289.35

11-2781 37* 11-2779 24* 11-2783 44 $312.49 * 11-2784 54

11-2777 1611-2778 17 $335.64 11-2780 3011-2782 38

SL-Lock Body Assemblies - 31- Prefix - For interchangeable (70-) core cylinder functionsPart No Function Price

11-2798 04* 11-2799 05 $367.46

11-2804 37* 11-2802 24* 11-2806 44 $390.61 * 11-2807 54

11-2800 1611-2801 17 $413.76 11-2803 3011-2805 38

SL-Lock Body Assemblies - 41- Prefix - For interchangeable (70-) core cylinder functionsPart No Function Price

11-2813 04* 11-2814 05 $329.85

11-2816 37* 11-2815 16 $376.15




BL-12BORED LOCKS


SL-Lock Body Assemblies - For 82- KESO cylinder functions


11-2843 04* 11-2844 05 $295.13

11-2849 37* 11-2847 24* 11-2851 44 $318.28 * 11-2852 54

11-2845 1611-2846 17 $341.42 11-2848 3011-2850 38

SL-Lock Body Assemblies - For 31- Prefix - For 82- KESO cylinder functions


11-2855 04* 11-2856 05 $373.25

11-2861 37* 11-2859 24* 11-2863 44 $396.40 * 11-2864 54

11-2857 1611-2858 17 $419.54 11-2860 3011-2862 38

SL-Lock Body Assemblies - For 41- Prefix - For 82- KESO cylinder functions


11-2865 04* 11-2866 05 $335.64

11-2868 37* 11-2867 16 $381.95




BL-13BORED LOCKS


SL-Lock Body Assemblies - For VC and VCVS V-10 cylinder functions


11-2817 04* 11-2818 05 $289.35

11-2823 37* 11-2821 24* 11-2825 44 $312.49 * 11-2826 54

11-2819 1611-2820 17 $335.64 11-2822 3011-2824 38

SL-Lock Body Assemblies - For 31- Prefix - For VC and VCVS V-10 cylinder functions


11-2829 04* 11-2830 05 $367.46

11-2835 37* 11-2833 24* 11-2837 44 $390.61 * 11-2838 54

11-2831 1611-2832 17 $413.76 11-2834 3011-2836 38

SL-Lock Body Assemblies - For 41- Prefix - For VC and VCVS V-10 cylinder functions


11-2839 04* 11-2840 05 $329.85

11-2842 37* 11-2841 16 $376.15

Note: Lockbodies are shipped with bearing assembly, inside & outside sleeve, and inside & outside collar.* Specify finish when ordering



BL-14BORED LOCKS

LEVERS & ROSES

11-0041 L lever, inside or outside, plain $66.54 $72.33 $78.1411-0042 L lever, inside or outside, button $66.54 $72.33 $78.1411-0043 L lever, inside or outside, std. cylinder and emergency button $66.54 $72.33 $78.1411-0044 L lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0045 L lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0046 L lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0047 L lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0048 L lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-0061 B lever, inside or outside, plain $66.54 $72.33 $78.1411-0062 B lever, inside or outside, button $66.54 $72.33 $78.1411-0063 B lever, inside or outside, std. cylinder and emergency button $66.54 $72.33 $78.1411-0064 B lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0065 B lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0066 B lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0067 B lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0068 B lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-0101 P lever, inside or outside, plain $66.54 $72.33 $78.1411-0102 P lever, inside or outside, button $66.54 $72.33 $78.1411-0103 P lever, inside or outside, std. cylinder and emergency button $66.54 $72.33 $78.1411-0104 P lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0105 P lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0106 P lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0107 P lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0108 P lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-2558 J lever, inside or outside, plain $73.79 $79.57 $85.3711-2559 J lever, inside or outside, button $73.79 $79.57 $85.3711-2560 J lever, inside or outside, std. cylinder and emergency button $73.79 $79.57 $85.3711-2561 J lever, inside or outside, 60- prefix SARGENT removable core $73.79 $79.57 $85.3711-2562 J lever, inside or outside, 70- prefix interchangeable core $73.79 $79.57 $85.3711-2563 J lever, inside or outside, 30- prefix to accept Schlage cyl $73.79 $79.57 $85.3711-2564 J lever, inside or outside, VC-/VCVS- prefix $73.79 $79.57 $85.3711-2565 J lever, inside or outside, 82- prefix to accept KESO $73.79 $79.57 $85.37Note: For handicapped levers, consult factory

Standard Cylinder includes 10, 21, 22, SC, SE, VA, VS prefixes

Roses Finish

04, 10, 3, 9,Part No. Description 26D 10B, 20D 26, 10BL, 1511-2444 O rose assy, inside or outside - all except O/S 15-3, 93, 94 functions $36.16 $41.95 $47.7511-2445 B rose assy, inside or outside - all except O/S 15-3, 93, 94 functions $36.16 $41.95 $47.7511-2446 L rose assy, inside or outside - all except O/S 15-3, 93, 94 functions $41.95 $47.75 $53.5211-2447 E rose assy, inside or outside - all except O/S 15-3, 93, 94 functions $39.06 $44.84 $50.6511-2448 O rose assy, inside or outside - 93, 94 functions $36.16 $41.95 $47.7511-2449 B rose assy, inside or outside - 93, 94 functions $36.16 $41.95 $47.7511-2451 E rose assy, inside or outside - 93, 94 functions $39.06 $44.84 $50.6511-2450 L rose assy, inside or outside - 93, 94 functions $41.95 $47.75 $53.5211-2482 O rose assy, outside - 15-3 function $36.16 $41.95 $47.7511-2483 B rose assy, outside - 15-3 function $36.16 $41.95 $47.7511-2484 E rose assy, outside - 15-3 function $39.06 $44.84 $50.6511-2485 L rose assy, outside - 15-3 function $41.95 $47.75 $53.52

Levers Finish

04, 10, 3, 9,Part No. Description 26D 10B, 20D 26, 10BL, 15

BL-15BORED LOCKS

SL-LEVERS



11-0301 SL-L lever, inside or outside, std. cylinder and emergency button (65) $66.54 $72.33 $78.1411-0302 SL-L lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0303 SL-L lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0304 SL-L lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0305 SL-L lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0306 SL-L lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-0317 SL-B lever, inside or outside, std. cylinder and emergency button (65) $66.54 $72.33 $78.1411-0318 SL-B lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0319 SL-B lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0320 SL-B lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0321 SL-B lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0322 SL-B lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-0349 SL-P lever, inside or outside, std. cylinder and emergency button (65) $66.54 $72.33 $78.1411-0350 SL-P lever, inside or outside, 60- prefix SARGENT removable core $66.54 $72.33 $78.1411-0351 SL-P lever, inside or outside, 70- prefix interchangeable core $66.54 $72.33 $78.1411-0352 SL-P lever, inside or outside, 30- prefix to accept Schlage cyl $66.54 $72.33 $78.1411-0353 SL-P lever, inside or outside, VC-/VCVS- prefix $66.54 $72.33 $78.1411-0354 SL-P lever, inside or outside, 82- prefix to accept KESO $66.54 $72.33 $78.1411-2869 SL-J lever, inside or outside, std. cylinder and emergency button (65) $73.79 $79.57 $85.3711-2870 SL-J lever, inside or outside, 60- prefix SARGENT removable core $73.79 $79.57 $85.3711-2871 SL-J lever, inside or outside, 70- prefix interchangeable core $73.79 $79.57 $85.3711-2872 SL-J lever, inside or outside, 30- prefix to accept Schlage cyl $73.79 $79.57 $85.3711-2873 SL-J lever, inside or outside, VC-/VCVS- prefix $73.79 $79.57 $85.3711-2874 SL-J lever, inside or outside, 82- prefix to accept KESO $73.79 $79.57 $85.37

Note: For handicapped levers, consult factoryStandard cylinder includes 10, 21, 22, SC, SE, VA, VS prefixes

SL-Levers Finish

04, 10, 3, 9,Part No. Description 26D 10B, 20D 26, 10BL, 15

BL-16BORED LOCKS

SLEEVE ASSEMBLIES



Locking Sleeve Assemblies for standard cylinder functions, 10-, 21-, 22-, 30-, SC, SE-, VA-, VS- Price Part No Description

11-2009 Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $141.7811-2010 Locking sleeve assy - 13 function, outside $75.2211-2011 Locking sleeve assy - 16, 38 function, inside $188.0711-2012 Locking sleeve assy - 17 function, outside $138.8811-2013 Locking sleeve assy - 17 function, inside $135.9811-2014 Locking sleeve assy - 30, 37 function, outside $138.8811-2015 Locking sleeve assy - 30 function, inside $135.9811-2016 Locking sleeve assy - 50 function, outside $141.7811-2017 Locking sleeve assy - 38, 54 function, outside $159.1311-2055 Locking sleeve assy - 65 function, outside $121.5211-2019 Locking sleeve assy, 31- prefix special door thickness -04, 05, 16, 24, 44 function, outside $156.2511-2020 Locking sleeve assy, 31- prefix special door thickness -13 function, outside $75.2211-2021 Locking sleeve assy, 31- prefix special door thickness -16, 38 function, inside $190.9511-2022 Locking sleeve assy, 31- prefix special door thickness -17 function, outside $150.4711-2023 Locking sleeve assy, 31- prefix special door thickness -17 function, inside $147.5611-2024 Locking sleeve assy, 31- prefix special door thickness -30, 37 function, outside $147.5611-2025 Locking sleeve assy, 31- prefix special door thickness-30 function, inside $144.6711-2026 Locking sleeve assy, 31- prefix special door thickness -50 function, outside $141.7811-2027 Locking sleeve assy, 31- prefix special door thickness -38, 54 function, outside $144.6711-2056 Locking sleeve assy, 31- prefix special door thickness -65 function, outside $112.86Note: for 31- prefix locking sleeves used with other cylinder prefixes, consult factory for part number.11-2028 Locking sleeve assy, 41- prefix, 3/4" throw latch -4, 05, 16 function, outside $147.5611-2029 Locking sleeve assy, 41- prefix, 3/4" throw latch -16 function, inside $188.0711-2030 Locking sleeve assy, 41- prefix, 3/4" throw latch -37 function, outside $138.88Note: for 41- prefix locking sleeves used with other cylinder prefixes, consult factory for part number.

Locking Sleeve Assemblies for 63- (60-) prefix removable core Price

11-2031 Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $144.6711-2032 Locking sleeve assy - 16, 38 function, inside $138.8811-2033 Locking sleeve assy - 17 function, outside $138.8811-2034 Locking sleeve assy - 17 function, inside $138.8811-2035 Locking sleeve assy - 30, 37 function, outside $138.8811-2036 Locking sleeve assy - 30 function, inside $133.0911-2037 Locking sleeve assy - 38, 54 function, outside $156.25Locking Sleeve Assemblies for 73- (70-) prefix interchangeable core Price 11-2726 Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $144.6711-2727 Locking sleeve assy - 16, 38 function, inside $138.8811-2728 Locking sleeve assy - 17 function, outside $138.8811-2729 Locking sleeve assy - 17 function, inside $138.8811-2730 Locking sleeve assy - 30, 37 function, outside $138.8811-2731 Locking sleeve assy - 30 function, inside $133.0911-2732 Locking sleeve assy - 38, 54 function, outside $156.25

Note: for 63- or 73- prefix locking sleeve used with 31- or 41- prefixes, consult factory for part number.

BL-17BORED LOCKS

SLEEVE ASSEMBLIES



Locking Sleeve Assemblies for 82- prefix KESO Price Part No Description

11-2069 Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $144.6711-2070 Locking sleeve assy - 16, 38 function, inside $138.8811-2071 Locking sleeve assy - 17, outside $138.8811-2072 Locking sleeve assy - 17, inside $138.8811-2073 Locking sleeve assy - 30, 37, outside $138.8811-2074 Locking sleeve assy - 30, inside $133.1011-2075 Locking sleeve assy - 37, 54, outside $156.25Locking Sleeve Assemblies for VC- and VCVS- prefix V-10 interchangeable core Price

11-2039 Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $141.7811-2040 Locking sleeve assy - 16, 38 function, inside $104.1611-2041 Locking sleeve assy - 17 function, outside $138.8811-2042 Locking sleeve assy - 17 function, inside $138.8811-2043 Locking sleeve assy - 30, 37 function, outside $138.8811-2044 Locking sleeve assy - 30 function, inside $135.9811-2045 Locking sleeve assy - 38, 54 function, outside $147.56Non-Locking Sleeve Assemblies (for standard cylinder functions, 10-, 21-, 22-, 30-, SC, SE-, VA-, VS-) Price Part No Description

11-2151 Non-locking sleeve assy - 04, 13 function, inside $66.54* 11-2152 Non-locking sleeve assy - 05 function, inside $101.26

11-2153 Non-locking sleeve assy - 15, 15-3, 37 function, inside - 15 function, outside $66.54* 11-2154 Non-locking sleeve assy - 44 function, inside $101.26* 11-2155 Non-locking sleeve assy - 50 function, inside $109.95* 11-2156 Non-locking sleeve assy - 24, 54, 65 function, inside $101.26

11-2159 Non-locking sleeve assy, 31- prefix special door thickness -04, 13 function, inside $69.45* 11-2160 Non-locking sleeve assy, 31- prefix special door thickness -05 function, inside $107.06

11-2161 Non locking-sleeve assy, 31- prefix special door thickness -15, 15-3, 37 function, inside -15 function, outside $66.54

* 11-2162 Non-locking sleeve assy, 31- prefix special door thickness -44 function, inside $107.06* 11-2163 Non-locking sleeve assy, 31- prefix special door thickness -50 function, inside $115.73* 11-2164 Non-locking sleeve assy, 31- prefix special door thickness -24, 54, 65 function, inside $104.16

11-2166 Non-locking sleeve assy, 41- prefix 3/4" throw latch -04 function, inside $66.54* 11-2167 Non-locking sleeve assy, 41- prefix 3/4" throw latch -05 function, inside $101.2611-2168 Non-locking sleeve assy, 41- prefix 3/4" throw latch -15, 15-3, 37 function, inside/15 function outside $69.45

*Specify finish when ordering

BL-18BORED LOCKS

SL-SLEEVE ASSEMBLIES



SL-Locking Sleeve Assemblies for standard cylinder functions, 10-, 21-, 22-, 30-, SC, SE-, VA-, VS- Price Part No Description

11-2597 SL-Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $141.7811-2598 SL-Locking sleeve assy - 16, 38 function, inside $188.0711-2599 SL-Locking sleeve assy - 17 function, outside $138.8811-2600 SL-Locking sleeve assy - 17 function, inside $135.9811-2601 SL-Locking sleeve assy - 30, 37 function, outside $138.8811-2602 SL-Locking sleeve assy - 30 function, inside $135.9811-2603 SL-Locking sleeve assy - 50 function, outside $141.7811-2604 SL-Locking sleeve assy - 38, 54 function, outside $159.1311-2606 SL-Locking sleeve assy, 31- prefix special door thickness -04, 05, 16, 24, 44 function, outside $156.2511-2607 SL-Locking sleeve assy, 31- prefix special door thickness -16, 38 function, inside $190.9511-2608 SL-Locking sleeve assy, 31- prefix special door thickness -17 function, outside $150.4711-2609 SL-Locking sleeve assy, 31- prefix special door thickness -17 function, inside $147.5611-2610 SL-Locking sleeve assy, 31- prefix special door thickness -30, 37 function, outside $147.5611-2611 SL-Locking sleeve assy, 31- prefix special door thickness -30 function, inside $144.6711-2612 SL-Locking sleeve assy, 31- prefix special door thickness -50 function, outside $141.7811-2613 SL-Locking sleeve assy, 31- prefix special door thickness -38, 54 function, outside $144.67Note: for 31- prefix locking sleeves used with other cylinder prefixes, consult factory for part number.11-2614 SL-Locking sleeve assy, 41- prefix, 3/4" throw latch -04, 05, 16 function, outside $147.5611-2615 SL-Locking sleeve assy, 41- prefix, 3/4" throw latch -16 function, inside $188.0711-2616 SL-Locking sleeve assy, 41- prefix, 3/4" throw latch -37 function, outside $138.88Note: for 41- prefix locking sleeves used with other cylinder prefixes, consult factory for part number.

SL-Locking Sleeve Assemblies for 63- or 73- prefix removable or interchangeable core Price

11-2617 SL-Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $144.6711-2618 SL-Locking sleeve assy - 16, 38 function, inside $138.8811-2619 SL-Locking sleeve assy - 17 function, outside $138.8811-2620 SL-Locking sleeve assy - 17 function, inside $138.8811-2621 SL-Locking sleeve assy - 30, 37 function, outside $138.8811-2622 SL-Locking sleeve assy - 30 function, inside $133.1011-2623 SL-Locking sleeve assy - 38, 54 function, outside $156.25Note: for 63- or 73- prefix locking sleeve used with 31- or 41- prefixes, consult factory for part number.

BL-19BORED LOCKS

SL-SLEEVE ASSEMBLIES



SL-Locking Sleeve Assemblies for 82- prefix KESO Price Part No Description

11-2653 SL-Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $144.6711-2654 SL-Locking sleeve assy - 16, 38 function, inside $138.8811-2655 SL-Locking sleeve assy - 17, outside $138.8811-2656 SL-Locking sleeve assy - 17, inside $138.8811-2657 SL-Locking sleeve assy - 30, 38, outside $138.8811-2658 SL-Locking sleeve assy - 30, inside $133.1011-2659 SL-Locking sleeve assy - 38, 54, outside $156.25SL-Locking Sleeve Assemblies for VC- and VCVS- prefix V-10 interchangeable core Price

11-2635 SL-Locking sleeve assy - 04, 05, 16, 24, 44 function, outside $141.7811-2636 SL-Locking sleeve assy - 16, 38 function, inside $104.1611-2637 SL-Locking sleeve assy - 17 function, outside $138.8811-2638 SL-Locking sleeve assy - 17 function, inside $138.8811-2639 SL-Locking sleeve assy - 30, 37 function, outside $138.8811-2640 SL-Locking sleeve assy - 30 function, inside $135.9811-2641 SL-Locking sleeve assy - 38, 54 function, outside $147.56

*Specify finish when ordering

BL-20BORED LOCKS

LATCH & BEARING ASSEMBLIES



Latch Assemblies (specify finish when ordering) Price11-2106 2-3/4" BS, Guarded latch assy 04, 05, 13, 15-3, 16, 17, 30, 37, 38 function $115.7311-2108 2-3/4" BS, Guarded latch assy 24 function $115.7311-2110 2-3/4" BS, Guarded latch assy 44, 50, 54 function $115.7311-2107 2-3/4" BS, Unguarded latch assy 15 function $115.7311-2111 2-3/4" BS, Unguarded latch assy 65 function $115.7311-2112 2-3/4" BS, Unguarded latch assy 94-2 function $115.7311-2113 23- Prefix, 3-3/4" BS, Guarded latch assy 04, 05, 13, 15-3, 16, 17, 30, 37, 38 function $128.9011-2115 23- Prefix, 3-3/4" BS, Guarded latch assy 24 function $128.9011-2117 23- Prefix, 3-3/4" BS, Guarded latch assy 44, 50, 54 function $128.9011-2114 23- Prefix, 3-3/4" BS, Unguarded latch assy 15 function $128.9011-2118 23- Prefix, 3-3/4" BS, Unguarded latch assy 65 function $128.9011-2119 23- Prefix, 3-3/4" BS, Unguarded latch assy 94-2 function $128.9011-2120 25- Prefix, 5" BS, Guarded latch assy 04, 05, 13, 15-3, 16, 17, 30, 37, 38 function $135.4611-2122 25- Prefix, 5" BS, Guarded latch assy 24 function $135.4611-2124 25- Prefix, 5" BS, Guarded latch assy 44, 50, 54 function $135.4611-2121 25- Prefix, 5" BS, Unguarded latch assy 15 function $135.4611-2125 25- Prefix, 5" BS, Unguarded latch assy 65 function $135.4611-2126 25- Prefix, 5" BS, Unguarded latch assy 94-2 function $135.4608-2517 41- Prefix, 3/4" throw, 2-3/4" BS, Guarded latch assy 04, 05, 15, 15-3, 16, 37, 38 function $171.26Bearing Assemblies Price11-2001 Bearing assy 04, 05, 13, 15, 15-3, 16, 17, 24, 30, 37, 44, 50, 54, 65 function $144.6711-2002 Bearing assy 70 function $188.0711-2003 Bearing assy 71 function $188.0711-2004 Bearing assy, 31- prefix, 04, 05, 13, 15, 15-3, 16, 17, 24, 30, 37, 44, 50, 54, 65 function $182.2811-2005 Bearing assy, 41- prefix, 3/4" throw latch 04, 05, 15, 15-3, 16, 37 function $162.03

BL-21BORED LOCKS

PARTS



Miscellaneous Parts *specify finish when ordering Price* 01-0225 Cup Washer $2.71* 01-1018 Countersunk Flat head Screw 10-24 x 1/2" (2" Dr) $0.70

01-1027 Countersunk Flat head Screw 10-24 x 3/8" (1-3/4" Dr) $0.70* 01-1316 Spanner set screw - for lever only (bit size #6) $2.95* 01-1424 6-Lobe security set screw for lever only 1/4-28 x .1675" (bit size T-20) $4.35

01-2201 Wood Screw #4 x 1/2" $0.6801-3337 Machine Screw #4-40 x 1/2" $3.17

* 01-4373 Countersunk Flat Head Screw 1/4-20 x 2-3/4" $3.7101-4530 6-Lobe Security Tool (Torx™) – to assemble lever set screw $9.16

* 01-5000 Countersunk Flat Head Screw 8-32 x 3/4" $0.68* 01-5001 Subfront Screws (6010 kit) $0.93 01-9109 Machine Screw #6-32 x 3/8" $0.93

01-9109 Machine Screw #6-32 x 3/8" $0.67* 08-0562 Subfront (6010 kit) $54.97

11-0031 Collar inside $5.7911-0032 Collar outside $8.4211-0039 Aligning pin - standard $0.5311-0138 Installation wrench – to assemble rose & collars $7.6411-0171 Cylinder tailpiece - interchangeable core - 6 pin $1.5011-0172 Cylinder tailpiece - interchangeable core - 7 pin and 6 pin SARGENT Removable Core $1.5011-0174 Anchor Plate $0.6711-0207 Aligning pin (for 31- prefix) $3.1511-0263 Threaded Plunger $15.7911-0266 Screwdriver $3.3011-0276 Cylinder Tailpiece Pack for 11-IC Cores $1.5011-2253 Cylinder adapter - standard cylinder $2.5111-2254 Cylinder adapter - removable core $2.51

* 11-2263 Thumbturn – 68 function $38.6911-2495 Mounting Flange Assy. (93 & 94 function) $105.2311-2496 Mounting Flange Assy. (94 function) $105.2311-2501 Tube Assy. (94-2 function) $197.2911-2520 Screw pack $15.91

* 11-2521 93 & 94 function screw pack $20.2511-2522 36- Screw pack $37.62

* 11-2523 36- 93 & 94 function screw pack $66.5511-2524 37- Screw pack $37.62

* 11-2525 37- 93 & 94 function screw pack $66.5511-2526 28- screw pack $15.9111-2527 28-36- screw pack $37.6211-2528 28-37- screw pack $37.6211-2529 41- screw pack $15.9111-2530 41-36 screw pack $37.6211-2531 41-37 screw pack $37.6211-2578 Tailpiece pack for 30- prefix cylinder $0.7313-1385 Cylinder tailpiece – adapts 10L cylinder to 11L cylinder - standard cylinder $1.41

* 13-4154 Emergency Release Cyl. (65 function) $38.3214-0057 Emergency key privacy function only $1.2114-0299 Lockout key – 50 function $3.65

BL-22BORED LOCKS

10-LINE PREFIXES



Miscellaneous Information

Prefix Description Price

1 Adapter plates for 1-3/8" thick door $23.00 10s SARGENT Signature Key System Add $34.00 / cyl.11s SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.20 2-3/8" backset with 1" front No addition 21s SARGENT Construction Key System (lost ball) Standard on new systems est. since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) For pre-established key systems only Add $10.00 / cyl.23 Lockset x 3 - 3/4" Backset Add $8.0025 Lockset x 5" Backset Add $12.0028 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard


30s Lever to accept Schlage cylinder - no cylinder provided No addition 36 6 Lobe security head screws Add $12.00 37 Spanner head screws Add $8.00 41 3/4" Throw with latch Add $48.00 60s SARGENT Removable Disposable Construction Core No addition 63s SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges. Not available for Hotel functions64s SARGENT Removable Construction Core Cylinder See CK-2 6573s Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s Small Format Interchangeable disposable plastic construction core No addition 72s Small Format Interchangeable 6-pin Construction Core (7-Pin w/11-Prefix) See page CK-2 73s Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)


Includes MK and GMK keying charges Add $40.00 / cyl.74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock75 Handicap Warning on Inside Lever – milled on backside of lever Add $26.00 76 Handicap Warning Outside Lever – milled on backside of lever Add $26.00 77 Handicap Warning on Both Levers – milled on backside of lever Add $52.00 80s Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182s SARGENT KESO Security Cylinder – patented – new key systems Add $47.00 /cyl.82s SARGENT KESO Security Cylinder (L,B,P levers only) Add $47.00 / cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.FW Freewheeling Locking Levers L, B, P levers only, not available w/10G70, 10G71 functions Add $8.00 RX Request to Exit (available with 04, 05, 37, 15, 70-12v & 24v, and 71-12v & 24v) functions

Handing required when ordering – How to order: RX-10G05 x LL x 26D x RH Add $98.00 SCs Schlage C Keyway cylinder, 0 bitted No addition SEs Schlage E Keyway cylinder, 0 bitted No addition SF 10 Line L lever to accept Medeco KeyMark and Schlage Full Size Interchangeable Core

– no cylinders provided No addition SG MicroShield™ – an antimicrobial powder coat Add $21.00 VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVSs SARGENT V-10 Standard Sub Assembled Cylinder See V-10 Cylinder Section

s Prefixes NOT available with 50 function.SuffixCPC Clear Powder Coat over 26D – 10G05 x GL x 26D x CPC Add $31.00


BL-23BORED LOCKS

10-LINE



Finish

10B/26D 3, 4, 9, 10, 10BL, 15, 20D, 26

$412.00 $422.00

$422.00 $434.00

$465.00 $476.00

$478.00 $489.00

$302.00 $314.00

$347.00 $360.00

$115.00 $121.00

$232.00 $240.00

$238.00 $249.00

$600.00 $610.00

Function

Single Cylinder


10G05 Entry/Office

10G37 Classroom

10G24 Entry


10G50 Hotel

10G54 Dormitory

Double Cylinder



10G26 Storeroom

10G30 Communicating

10G38 Classroom security

Non Keyed

10U15 Passage

10G13 Exit

10G15-3 Exit

10U65 Privacy

10U68 Hospital Privacy

10U93 1/2 Dummy Trim

10U94 Dummy Trim

10U94-2 Dummy Trim

Electro-Mechanical

10G70-12V / 10G70-24V Fail Safe – Handed

10G71-12V / 10G71-24V Fail Secure – Handed

Rose Design:G RoseL Rose

Lever Design:L – LeverB – LeverP – Lever

Strikes - See catalog for available lip lengths Specify Finish





2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52



Note: Split finishes are available. Order outside/inside…price as higher price finish.

“G” Rose with “L” Lever “L” Rose with “B” Lever “G” Rose with “P” Lever

GPLBGL

BL-24BORED LOCKS

10-LINE PREFIXES





1 Adapter plates for 1-3/8" thick door $23.00

10s SARGENT Signature Key System Add $34.00 / cyl.

11s SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, SC, SE, VA, VS prefixes) No addition

1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition

11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2

11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.

20 2-3/8" backset with 1" front No addition

21s SARGENT Construction Key System (lost ball) Standard on new systems est. since 5/1/96 Add $10.00 / cyl.

22s SARGENT Construction Key System (split key) For pre-established key systems only Add $10.00 / cyl.

23 Lockset x 3 - 3/4" Backset Add $8.00

25 Lockset x 5" Backset Add $12.00

28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard

Lip Lengths 1-1/8" or 1-3/8" No addition

Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Add $10.00

30 10 Line lever to accept Schlage cylinder - no cylinder provided No addition

36 6 Lobe security head screws Add $12.00

37 Spanner head screws Add $8.00

41 3/4" Throw with latch Add $48.00

60s SARGENT Removable Disposable Construction Core No addition

63s SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges. Not available for Hotel functions

64s SARGENT Removable Construction Core Cylinder See CK-2

74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock

75 Handicap Warning on Inside Lever Add $26.00

76 Handicap Warning Outside Lever Add $26.00

77 Handicap Warning on Both Levers Add $52.00

BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.RX Request to Exit (available with 04, 05, 37, 15, 70-12v & 24v, and 71-12v & 24v) functions

Handing required when ordering – How to order: RX-10G05 x LL x 26D x RH Add $98.00 SCs Schlage C Keyway cylinder, 0 bitted No addition

SEs Schlage E Keyway cylinder, 0 bitted No addition

SG MicroShield™ – an antimicrobial powder coat Add $21.00

VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

VSs SARGENT V-10 Standard Sub Assembled Cylinder See V-10 Cylinder Section

s Prefixes NOT available with 50 function.

Suffix

CPC Clear Powder Coat over 26D – 10G05 x LJ x 26D x CPC Add $31.00


BL-25BORED LOCKS

10-LINE



Finish

10B/26D 3, 4, 9, 10, 10BL, 15, 20D, 26

$425.00 $436.00

$436.00 $445.00

$478.00 $489.00

$491.00 $502.00

$316.00 $326.00

$362.00 $370.00

$122.00 $126.00

$243.00 $253.00

$251.00 $260.00

$614.00 $624.00

Function

Single Cylinder

10G04 Storeroom

10G05 Office

10G37 Classroom

10G24 Dormitory


10G50 Hotel

10G54 Dormitory

Double Cylinder

10G16 Public Entrance

10G17 Asylum

10G26 Storeroom

10G30 Communicating


Non Keyed

10U15 Passage

10G13 Exit

10G15-3 Exit

10U65 Privacy



10U94 Dummy Trim

10U94-2 Dummy Trim

Electro-Mechanical



LJ

“L” Rose with “J” Lever “G” Rose with “J” Lever

GJ

Rose Design:G RoseL Rose

Lever Design:J – Lever






2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52




BL-26BORED LOCKS

10-LINE COASTAL SERIES PREFIXES





1 Adapter plates for 1-3/8" thick door $23.00 10s SARGENT Signature Key System Add $34.00 / cyl.11s SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.20 2-3/8" backset with 1" front No addition 21s SARGENT Construction Key System (lost ball) Standard on new systems est. since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) For pre-established key systems only Add $10.00 / cyl.23 Lockset x 3 - 3/4" Backset Add $8.00 25 Lockset x 5" Backset Add $12.0028 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard


30 Lever to accept Schlage cylinder - no cylinder provided No addition 36 6 Lobe security head screws Add $12.00 37 Spanner head screws Add $8.00 41 3/4" Throw with latch Add $48.00 60s SARGENT Removable Disposable Construction Core No addition 63s SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges. Not available for Hotel functions64s SARGENT Removable Construction Core Cylinder See CK-2 6573s Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s Small Format Interchangeable disposable plastic construction core No addition 72s Small Format Interchangeable 6-pin Construction Core (7-Pin w/11-Prefix) See page CK-2 73s Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)


Includes MK and GMK keying charges Add $40.00 / cyl.74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock80s Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182s SARGENT KESO Security Cylinder – patented – new key systems Add $47.00 /cyl.82s SARGENT KESO Security Cylinder (L,B,P levers only) Add $47.00 / cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.FW Freewheeling Locking Levers – Not available w/10G70, 10G71 functions Add $8.00RX Request to Exit (available with 04, 05, 37, 15, 70-12v & 24v, and 71-12v & 24v) functions

Handing required when ordering – How to order: RX-10G05 x LL x 26D x RH Add $98.00 SCs Schlage C Keyway cylinder, 0 bitted No addition SEs Schlage E Keyway cylinder, 0 bitted No addition SG MicroShield™ – an antimicrobial powder coat Add $21.00 VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVSs SARGENT V-10 Standard Sub Assembled Cylinder See V-10 Cylinder Section

s Prefixes NOT available with 50 function.SuffixCPC Clear Powder Coat over 26D – 10G05 x GY x 26D x CPC Add $31.00


BL-27BORED LOCKS

10-LINE COASTAL SERIES



Finish

10B/26D 3, 4, 9, 10, 10BL, 15, 20D, 26

$476.00 $491.00

$486.00 $502.00

$529.00 $545.00

$541.00 $557.00

$364.00 $379.00

$409.00 $422.00

$145.00 $153.00

$291.00 $306.00

$297.00 $314.00

$665.00 $679.00

Function

Single Cylinder


10G05 Entry/Office

10G37 Classroom

10G24 Entry


10G50 Hotel

10G54 Dormitory

Double Cylinder



10G26 Storeroom

10G30 Communicating

10G38 Classroom security

Non Keyed

10U15 Passage

10G13 Exit

10G15-3 Exit

10U65 Privacy



10U94 Dummy Trim

10U94-2 Dummy Trim

Electro-Mechanical



GY“G” Rose with “Y” Lever “G” Rose with “G” Lever

GG






2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52




Rose Design:G – RoseL – Rose

Lever Design:*Y – Lever*G – Lever

*Handed – Specify hand when ordering

BL-28BORED LOCKS

10-LINE LEVERS



Lever Handles Finish

Part # Description 3, 4, 9, 10, 10B, 15, 20D, 26, 26D

10-0501 Inside or outside lever, “L” design, Passage10-0502 Inside or outside lever, “L” design, Cylinder, Emergency Button (65)10-0503 Inside or outside lever, “L” design, Turn Button, T-Turn and 30- prefix10-0504 Inside or outside lever, “L” design prepared for SARGENT Removable core cylinder 10-0506 Inside or outside lever, “L” design prepared for SARGENT KESO 82- cylinder10-0505 Inside or outside lever, “L” design prepared for Interchangeable core cylinder 72- 10-0545 Inside or outside lever, “P” design, Passage10-0546 Inside or outside lever, “P” design, Cylinder, Emergency Button (65)10-0547 Inside or outside lever, “P” design, Turn Button, T-Turn and 30- prefix10-0548 Inside or outside lever, “P” design prepared for SARGENT Removable core cylinder 10-0550 Inside or outside lever, “P” design prepared for SARGENT KESO 82- cylinder10-0549 Inside or outside lever, “P” design prepared for Interchangeable core cylinder 72- $59.89 10-2204 Inside or outside lever, “J” design, Passage10-2205 Inside or outside lever, “J” design, Cylinder, Emergency Button (65)10-2206 Inside or outside lever, “J” design, Turn Button, T-Turn and 30- prefix10-2207 Inside or outside lever, “J” design prepared for SARGENT Removable core cylinder10-0523 Inside or outside lever, “B” design, Passage10-0524 Inside or outside lever, “B” design, Cylinder, Emergency Button (65)10-0525 Inside or outside lever, “B” design, Turn Button, T-Turn and 30- prefix10-0526 Inside or outside lever, “B” design prepared for SARGENT Removable core cylinder10-0528 Inside or outside lever, “B” design prepared for SARGENT KESO 82- cylinder10-0527 Inside or outside lever, “B” design prepared for Interchangeable core cylinder 72-

Lever Handles w/Handicap Warning Finish


10-0512 Inside or outside Lever, "L" design, Passage10-0513 Inside or outside Lever, "L" design, Cylinder, Emergency Button (65)10-0514 Inside or outside Lever, "L" design, Turn Button, T-Turn and 30- prefix10-0515 Inside or outside Lever, "L" design prepared for SARGENT Removable core cylinder10-0516 Inside or outside Lever, "L" design prepared for SARGENT Interchangeable 72- core cylinder10-0517 Inside or outside Lever, "L" design prepared for SARGENT KESO 82- cylinder10-0556 Inside or outside Lever, "P" design, Passage10-0557 Inside or outside Lever, "P" design, Cylinder, Emergency Button (65)10-0558 Inside or outside Lever, "P" design, Turn Button, T-Turn and 30- prefix10-0559 Inside or outside Lever, "P" design prepared for SARGENT Removable core cylinder10-0560 Inside or outside Lever, "P" design prepared for SARGENT Interchangeable 72- core cylinder10-0561 Inside or outside Lever, "P" design prepared for SARGENT KESO 82- cylinder $93.10 10-2245 Inside or outside Lever, "J" design, Passage10-2246 Inside or outside Lever, "J" design, Cylinder, Emergency Button (65)10-2247 Inside or outside Lever, "J" design, Turn Button, T-Turn and 30- prefix10-2248 Inside or outside Lever, "J" design prepared for SARGENT Removable core cylinder10-0534 Inside or outside Lever, "B" design, Passage10-0535 Inside or outside Lever, "B" design, Cylinder, Emergency Button (65)10-0536 Inside or outside Lever, "B" design, Turn Button, T-Turn and 30- prefix10-0537 Inside or outside Lever, "B" design prepared for SARGENT Removable core cylinder10-0538 Inside or outside Lever, "B" design prepared for SARGENT Interchangeable 72- core cylinder10-0539 Inside or outside Lever, "B" design prepared for SARGENT KESO 82- cylinder

BL-29BORED LOCKS

10-LINE COASTAL SERIES LEVERS



Lever Handles - Coastal Series Design Finish


10-0611 Inside or outside Lever, "Y" design, Passage - Left10-0612 Inside or outside Lever, "Y" design, Passage - Right10-0613 Inside or outside Lever, "Y" design, Cylinder and emergency button (65) - Left10-0614 Inside or outside Lever, "Y" design, Cylinder and emergency button (65) - Right10-0615 Inside or outside Lever, "Y" design, Turn Button, T-Turn and 30- prefix - Left10-0616 Inside or outside Lever, "Y" design, Turn Button, T-Turn and 30- prefix - Right10-0617 Inside or outside Lever, "Y" design prepared for SARGENT Removable core cylinder - Left10-0618 Inside or outside Lever, "Y" design prepared for SARGENT Removable core cylinder - Right10-0619 Inside or outside Lever, "Y" design prepared for SARGENT Interchangeable 72- core cylinder - Left10-0620 Inside or outside Lever, "Y" design prepared for SARGENT Interchangeable 72- core cylinder - Right10-0621 Inside or outside Lever, "Y" design prepared for SARGENT KESO 82- cylinder - Left10-0622 Inside or outside Lever, "Y" design prepared for SARGENT KESO 82- cylinder - Right10-0567 Inside or outside Lever, "G" design, Passage - Left $69.07 10-0568 Inside or outside Lever, "G" design, Passage - Right10-0569 Inside or outside Lever, "G" design, Cylinder and emergency button (65)- Left10-0570 Inside or outside Lever, "G" design, Cylinder and emergency button (65)- Right10-0571 Inside or outside Lever, "G" design, Turn Button, T-Turn and 30- prefix - Left10-0572 Inside or outside Lever, "G" design, Turn Button, T-Turn and 30- prefix - Right10-0573 Inside or outside Lever, "G" design prepared for SARGENT Removable core cylinder - Left10-0574 Inside or outside Lever, "G" design prepared for SARGENT Removable core cylinder - Right10-0575 Inside or outside Lever, "G" design prepared for SARGENT Interchangeable 72- core cylinder - Left10-0576 Inside or outside Lever, "G" design prepared for SARGENT Interchangeable 72- core cylinder - Right10-0577 Inside or outside Lever, "G" design prepared for SARGENT KESO 82- cylinder - Left10-0578 Inside or outside Lever, "G" design prepared for SARGENT KESO 82- cylinder - Right

BL-30BORED LOCKS

10-LINE ROSES/LATCHES/ASSEMBLIES



Roses 26D/10B 3, 4, 9, 10, 10B, 10BL, 15, 20D, 2610-0798 Inside and outside Rose Scalp – L $37.98 $56.98

10-0790 Inside and outside Rose Scalp – G $52.58 $71.60

10-3048 Inside Rose Spring Assy. (not finished) $65.76 $65.76

10-3049 Outside Rose Spring Assy. (not finished) $90.58 $90.58

10-3050 Rose Spring Assy. (10G15-3) function only $52.58 $71.60

10-0496 I/S Rose Scalp (10G38, 10G16) $52.58 $71.60

Latch Units

Standard 2-3/4" Backset 3, 4, 9, 10, 10B, 32D

10-2000 Guarded Latch $50.47

10-2022 Unguarded Latch $47.82

20 Prefix 2-3/8" Backset 3, 4, 9, 10, 10B, 32D

10-3186 Guarded Latch 2-3/8" $60.80

10-3187 Unguarded Latch 2-3/8" $57.12

23 Prefix 3-3/4" Backset 3, 4, 9, 10, 10B, 32D



25 Prefix 5" Backset 3, 4, 9, 10, 10B, 32D



41 Prefix 2-3/4" Backset with 3/4" Throw 4, 26D


Extension Only

10-2059 3-3/4" Extension (add to 2-3/4" BS Latchbolt) 23- prefix $16.57

10-2060 5" Extension (add to 2-3/4" BS Latchbolt) 25- prefix $21.64

10-0048 Extension Cover Sleeve (Plastic) $2.08

Lock Body Assemblies For non-cylinder and standard cylinder and 10-, 21-, 22-, 30-, SC-, SE-, VA, VS-, 10-UL- Prefix

Part # Function Specify Finish10-2538 04

* 10-2543 05 10-2547 1310-2548 1510-3054 15-310-2550 1610-2555 17

* 10-2560 24 $236.67 10-3095 2610-2565 3010-2570 3710-3035 38

* 10-2575 44* 10-2579 50* 10-2581 54* 10-3044 65, 68 – order emergency button separately

ordered ONLY with the lever assembly10-2587 7010-2592 71 $424.91

BL-31BORED LOCKS

10-LINE LOCKBODY ASSEMBLIES



Lock Body Assemblies To Accept SARGENT Removable Core Cylinders (60-, 63-, 64-Prefixes)

Part # Function Specify Finish10-2539 04

* 10-2544 0510-2551 1610-2556 17

* 10-2561 2410-3096 26 $242.52 10-2566 3010-2571 3710-3036 38

* 10-2576 44* 10-2582 54

10-2588 7010-2593 71 $430.76

Lock Body Assemblies To Accept SARGENT KESO Cylinder (82-Prefix)Part # Function Specify Finish10-2541 04

* 10-2546 0510-2553 1610-2558 17

* 10-2563 2410-3098 26 $246.91 10-2568 3010-2573 3710-3038 38

* 10-2578 44* 10-2584 54

10-2590 7010-2595 71 $435.15

Lock Body Assemblies To Accept Arrow, Best, Falcon Interchangeable core Cylinders

Part # Function (70-, 72-, 65-73-, 65-73-7P, 73, 73-7P)* Specify Finish10-2540 04

* 10-2545 0510-2552 1610-2557 17

* 10-2562 2410-3097 26 $246.91 10-2567 3010-2572 3710-3037 38

* 10-2577 44* 10-2583 54

10-2589 7010-2594 71 $435.15

* Order by Finish 3, 4, 9, 10,10B, 15, 26, 26D

BL-32BORED LOCKS

10-LINE FW LOCKBODY ASSEMBLIES



Freewheel Lock body Assy for non-cylinder and standard cylinder (10, 11, 21, 22, SC, SE, VA, VS prefix)Part # Function Specify Finish

10-2686 04*10-2691 0510-3085 1310-3086 1610-3090 17

*10-2707 2410-3099 26 $247.29 10-3103 3010-2717 37

*10-3112 44*10-3116 50*10-3117 54*10-3121 65, 68 – order emergency button separately

Freewheel Lockbody Assy to accept SARGENT Removable Core Cylinders (51, 52, 60, 63, 64 prefix)Part # Function Specify Finish

10-2687 04*10-2692 0510-3087 1610-3091 17

*10-2708 2410-3100 26 $253.14 10-3104 3010-2718 37

*10-3113 44*10-3118 54

Freewheel Lockbody Assy to accept Interchangeable Core Cylinders (65-73, 65-73-7P, 70, 72, 73, 73-7P prefix)Part # Function Specify Finish

10-2688 04*10-2693 0510-3088 1610-3092 17

*10-2709 2410-3101 26 $257.52 10-3105 3010-2719 3710-3114 44

*10-3119 54

Freewheel Lockbody Assy to accept SARGENT KESO cylinder (82 prefix)Part # Function Specify Finish

10-3083 04*10-3084 0510-3089 1610-3093 17

*10-3094 2410-3102 26 $257.52 10-3106 3010-3107 37

*10-3115 44*10-3120 54

BL-33BORED LOCKS

10-LINE PARTS



Miscellaneous Price01-0949 Washer only (30- prefix) for cylinder (order 2 per lock) $0.68

01-4414 Screw Phillips Pan-head #6 x 3/4" (order 4 per lock) $0.24

*08-2842 Dummy Front (94-2 function) $16.69

10-0019 Cylinder Spacer (white plastic disk) $0.53

10-0039 Clips (4 required per lock) - For Old Style 10L $1.60

10-0042 Lockout Key (50 function-for inside push button only) $3.06

10-0043 Push Pin Tool $0.47

10-0055 Spring (13 function) $0.40

10-0056 Lever Catch Plug Key - 13 function (long push pin tool) $2.19

10-0059 Plastic Extension Retainer for removable core (Locks prior to April 2000 only) $3.45

10-0077 Lever Catch-Flat Spring $1.32

10-0195 Retractor spring for lockbody (all functions, inside lockbody - 2 per lock) $0.68

10-0204 Locking slide spring (inside lockbody) $0.40

10-0239 6-Pin Tailpiece (Removable & Interchangeable Cores) All functions except 54 $1.50

10-0286 6-Pin Tailpiece (Removable & Interchangeable Cores) 54 function only $1.50

10-0288 Lead Lining Plate for Rose (1) $10.63

10-0289 Lead Latchbolt Plug (5/8" dia. x 1/4") $78.88

10-0312 Cylinder Retainer (required for cylinder lever - standard) - plastic $1.32

10-0313 Cylinder Retainer (for Interchangeable Core, Removable Core & KESO core) - plastic $1.32

10-0792 Spacer Bushing $2.01

10-0833 Screw Retainer $0.26

10-0842 Tailpiece for Medeco/Schlage SF prefix $4.05

10-0850 Adapter Plate RX Prefix $39.60

10-2031 Spring Cartridge (2 required per lock) - for Old Style 10L $31.87

10-2052 Screw Pack (Standard) - for (2) latchbolt, (2) strike, & (2) surface screws $3.98

10-2070 Screw Pack (28 Prefix) - for (2) latchbolt, (2) strike, & (2) surface screws $1.61

10-2071 Screw Pack (Dummy Trim - 94 & 94-2 function) $1.32

10-2078 Key Cam Ext. & Pin Assy. (Removable Core - standard) $16.21

10-2090 Cyl. Retainer & Washer Pack (30- Prefix) $7.32

10-2185 Key Cam Ext. & Pin Assy. (Removable Core - 54 function only) $16.21

10-2635 Retractor & Roller Assy. (Inside Lockbody) $21.79

*10-3043 T-Turn (68 function) $38.69

10-3122 10U93 Support Plate $47.70

10-3123 10U94 Outside Support Plate $49.00

10-3124 10U94 Inside Support Plate $56.73

10-3138 Cylinder Tailpiece Pack for 11-IC cores $1.50

10-3188 Adapter plate (set of 2) $38.32

13-0896 Cylinder tailpiece - 10 Line 50 function only $1.50

*13-4154 Emergency Release Cylinder (65 function) $38.32

14-0057 Emergency Release Key (65 function only) $1.21

14-0299 Lockout Key (10G50 function-for inside button) $3.62

14-0300 Emergency Key $0.42

* Order by Finish 3, 4, 9, 10,10B, 15, 26, 26D

Note: See page BL-50 for replacement kits for 7600 Integra Locks. Must specify if intending to use with 10-Line lockset.

BL-34BORED LOCKS

7-LINE PREFIXES





1- 7 Line Lock for 1-3/8" door (Shim Kits) No addition 10 SARGENT Signature Key System Add $34.00 / cyl.11 SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, SC, SE, VA, VS prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.14 505 Full Lip Strike No addition 20 2-3/8" Backset Latch w/shim kits to fit 1-3/8" door No addition 21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard


30 7 Line Lever to accept Schlage cylinder - no cylinder provided No addition 36 6 Lobe Security Head Screws Add $12.00 37 Spanner Head Screws Add $8.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6-Pin Uncombinated Cores (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7-Pin Uncombinated Cores (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable disposable plastic construction core No addition 72 Small Format Interchangeable 6 Pin Construction core (7-Pin w/11- prefix) See page CK-2 73 Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.737P Small Format Interchangeable Core, 7-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.75 Handicap Warning on Inside Lever – milled on backside of lever Add $26.00 76 Handicap Warning Outside Lever – milled on backside of lever Add $26.00 77 Handicap Warning on Both Levers – milled on backside of lever Add$52.00 80 Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182 SARGENT KESO Security Cylinder – patented – new key systems Add $47.00 /cyl.82 SARGENT KESO Security Cylinder – existing key systems ONLY Add $47.00 /cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.FW Freewheeling Locking Levers – 04, 05, 37, 65 Functions Add $8.00 SC Schlage C Keyway Cylinder, 0-bitted No addition SE Schlage E Keyway Cylinder, 0-bitted No addition SF 7 Line L lever to accept Medeco KeyMark and Schlage Full Size Interchangeable Core

– no cylinders provided (not available with 50 Function) No addition SG MicroShield™ – an antimicrobial powder coat Add $21.00 VA SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVS SARGENT V-10 Standard Sub Assembled Cylinder See V-10 Cylinder Section

SuffixCPC Clear Powder Coat over 26D – 7G05 x LL x 26D x CPC Add $31.00


BL-35BORED LOCKS

7-LINE



LL“L” Rose with “L” Lever “L” Rose with “B” Lever “L” Rose with “P” Lever

Rose Design:L – Rose

Lever Design:L – LeverB – LeverP – Lever LB LP

Function FinishCylinder 10B, 26D 4, 10, 26 3, 157G04 Storeroom/Closet 7G05 Entry/Office $260.00 $264.00 $270.00 7G37 Classroom Non Keyed7U15 Passage $186.00 $190.00 $196.00 7G15-3 Communicating7U65 Privacy $202.00 $207.00 $212.00 7U68 Hospital/Privacy7U93 Single Lever Pull $89.00 $92.00 $96.00 7U94 Double lever pull7U94-2 Double lever pull x $180.00 $185.00 $189.00

Latchbolt PlateStrikes Specify Finish

505 Full Lip Strike (not available in longer lip lengths) $7.61





2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52



NOTE: Split finishes are available. Order outside/inside…price as higher price finish.





1- 7 Line Lock for 1-3/8" door (Shim Kits) No addition 10 SARGENT Signature Key System Add $34.00 / cyl.11 SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, SC, SE, VA, VS prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.14 505 Full Lip Strike No addition 20 2-3/8" Backset Latch w/shim kits to fit 1-3/8" door No addition 21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard


30 7 Line Lever to accept Schlage cylinder - no cylinder provided No addition 36 6 Lobe Security Head Screws Add $12.00 37 Spanner Head Screws Add $8.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6-Pin Uncombinated Cores (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7-Pin Uncombinated Cores (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable disposable plastic construction core No addition 72 Small Format Interchangeable 6 Pin Construction core (7-Pin w/11- prefix) See page CK-2 73 Small Format Interchangeable Core, 6-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.737P Small Format Interchangeable Core, 7-Pin (refer to CK-8 for available keyways)

Includes MK and GMK keying charges Add $40.00 / cyl.80 Levers to accept KESO and Keso F1 cylinders – no cylinders provided No addition F182 SARGENT KESO Security Cylinder – patented – new key systems Add $47.00 /cyl.82 SARGENT KESO Security Cylinder – existing key systems ONLY Add $47.00 /cyl.BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.FW Freewheeling Locking Levers – 04, 05, 37, 65 Functions Add $8.00 SC Schlage C Keyway Cylinder, 0-bitted No addition SE Schlage E Keyway Cylinder, 0-bitted No addition SG MicroShield™ – an antimicrobial powder coat Add $21.00 VA SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVS SARGENT V-10 Standard Sub Assembled Cylinder See V-10 Cylinder Section

SuffixCPC Clear Powder Coat over 26D – 7G05 x LY x 26D x CPC Add $31.00


BL-36BORED LOCKS

7-LINE COASTAL SERIES PREFIXES

BL-37BORED LOCKS

7-LINE COASTAL SERIES



Function FinishCylinder 10B, 26D 4, 10, 26 3, 157G04 Storeroom/Closet 7G05 Entry/Office $302.00 $310.00 $317.00 7G37 Classroom Non Keyed7U15 Passage $226.00 $234.00 $240.00 7G15-3 Communicating7U65 Privacy $243.00 $251.00 $258.00 7U68 Hospital/Privacy7U93 Single Lever Pull $111.00 $114.00 $118.00 7U94 Double lever pull7U94-2 Double lever pull x $220.00 $228.00 $236.00

Latchbolt PlateStrikes - See catalog for available lip lengths Specify Finish

505 Full Lip strike (not available in longer lip lengths) $7.61





2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52



NOTE: Split finishes are available. Order outside/inside…price as higher price finish.

“L” Rose with “Y” Lever “L” Rose with “G” Lever

Rose Design:L – Rose

Lever Design:*Y – Lever*G – Lever

*Handed – specify hand when orderingLGLY

BL-38BORED LOCKS

7-LINE LEVERS



Lever Handles FinishPart # Description 3, 4, 10, 10B, 15, 26, 26D10-0501 Inside or outside lever, “L” design, Passage

10-0502 Inside or outside lever, “L” design, Cylinder, Emergency Button (65)

10-0503 Inside or outside lever, “L” design, Turn Button and 30- prefix

10-0504 Inside or outside lever, “L” design, prepared for SARGENT Removable core cylinder

10-0505 Inside or outside lever, “L” design, prepared for Interchangeable core cylinder 72-

10-0506 Inside or outside lever, “L” design, prepared for SARGENT Keso (82) cylinder

10-0545 Inside or outside lever, “P” design, Passage

10-0546 Inside or outside lever, “P” design, Cylinder, Emergency Button (65)

10-0547 Inside or outside lever, “P” design, Turn Button and 30- prefix

10-0548 Inside or outside lever, “P” design, prepared for SARGENT Removable core cylinder $59.89

10-0549 Inside or outside lever, “P” design, prepared for Interchangeable core cylinder 72-

10-0550 Inside or outside lever, “P” design, prepared for SARGENT Keso (82) cylinder

10-0523 Inside or outside lever, “B” design, Passage

10-0524 Inside or outside lever, “B” design, Cylinder, Emergency Button (65)

10-0525 Inside or outside lever, “B” design, Turn Button and 30- prefix

10-0526 Inside or outside lever, “B” design, prepared for SARGENT Removable core cylinder

10-0527 Inside or outside lever, “B” design, prepared for Interchangeable core cylinder 72-

10-0528 Inside or outside lever, “B” design, prepared for SARGENT Keso (82) cylinder

Lever Handles w/Handicap Warning FinishPart # Description 3, 4, 9, 10, 10B, 15, 26, 26D

10-0512 Inside or outside Lever, "L" design, Passage

10-0513 Inside or outside Lever, "L" design, Cylinder, Emergency Button (65)

10-0514 Inside or outside Lever, "L" design, Turn Button, T-Turn and 30- prefix

10-0515 Inside or outside Lever, "L" design, prepared for SARGENT Removable core cylinder

10-0516 Inside or outside Lever, "L" design, prepared for SARGENT Interchangeable 72- core cylinder

10-0556 Inside or outside Lever, "P" design, Passage

10-0557 Inside or outside Lever, "P" design, Cylinder, Emergency Button (65)

10-0558 Inside or outside Lever, "P" design, Turn Button, T-Turn and 30- prefix $93.10

10-0559 Inside or outside Lever, "P" design, prepared for SARGENT Removable core cylinder

10-0560 Inside or outside Lever, "P" design, prepared for SARGENT Interchangeable 72- core cylinder

10-0534 Inside or outside Lever, "B" design, Passage

10-0535 Inside or outside Lever, "B" design, Cylinder, Emergency Button (65)

10-0536 Inside or outside Lever, "B" design, Turn Button, T-Turn and 30- prefix

10-0537 Inside or outside Lever, "B" design, prepared for SARGENT Removable core cylinder

10-0538 Inside or outside Lever, "B" design, prepared for SARGENT Interchangeable 72- core cylinder

BL-39BORED LOCKS

7-LINE COASTAL SERIES LEVERS



Lever Handles - Coastal Series Design FinishPart # Description 3, 4, 9, 10, 10B, 15, 26, 26D

10-0611 Inside or outside Lever, "Y" design, Passage - Left

10-0612 Inside or outside Lever, "Y" design, Passage - Right

10-0613 Inside or outside Lever, "Y" design, Cylinder and emergency button (65) - Left

10-0614 Inside or outside Lever, "Y" design, Cylinder and emergency button (65) - Right

10-0615 Inside or outside Lever, "Y" design, Turn Button, T-Turn and 30- prefix - Left

10-0616 Inside or outside Lever, "Y" design, Turn Button, T-Turn and 30- prefix - Right

10-0617 Inside or outside Lever, "Y" design, prepared for SARGENT Removable core cylinder - Left

10-0618 Inside or outside Lever, "Y" design, prepared for SARGENT Removable core cylinder - Right

10-0619 Inside or outside Lever, "Y" design, prepared for SARGENT Interchangeable 72- core cylinder - Left

10-0620 Inside or outside Lever, "Y" design, prepared for SARGENT Interchangeable 72- core cylinder - Right

10-0621 Inside or outside Lever, "Y" design, prepared for SARGENT Keso (82) cylinder - Left

10-0622 Inside or outside Lever, "Y" design, prepared for SARGENT Keso (82) cylinder - Right

10-0567 Inside or outside Lever, "G" design, Passage - Left $69.07

10-0568 Inside or outside Lever, "G" design, Passage - Right

10-0569 Inside or outside Lever, "G" design, Cylinder and emergency button (65) - Left

10-0570 Inside or outside Lever, "G" design, Cylinder and emergency button (65) - Right

10-0571 Inside or outside Lever, "G" design, Turn Button, T-Turn and 30- prefix - Left

10-0572 Inside or outside Lever, "G" design, Turn Button, T-Turn and 30- prefix - Right

10-0573 Inside or outside Lever, "G" design, prepared for SARGENT Removable core cylinder - Left

10-0574 Inside or outside Lever, "G" design, prepared for SARGENT Removable core cylinder - Right

10-0575 Inside or outside Lever, "G" design, prepared for SARGENT Interchangeable 72- core cylinder - Left

10-0576 Inside or outside Lever, "G" design, prepared for SARGENT Interchangeable 72- core cylinder - Right

10-0577 Inside or outside Lever, "G" design, prepared for SARGENT Keso (82) cylinder - Left

10-0578 Inside or outside Lever, "G" design, prepared for SARGENT Keso (82) cylinder - Right

BL-40BORED LOCKS

7-LINE ASSEMBLIES



Lock Body Assemblies Standard Cylinder and non cylinder FunctionsPart # Function Price07-2650 04

* 07-2660 05

07-2670 15

07-2675 15-3 $137.61

07-2680 37

* 07-2690 65, 68 – order emergency button seperately

Lock Body Assemblies To Accept SARGENT Removable Core Cylinders (60-, 63-, 64-Prefixes)Part # Function Price07-2651 04

* 07-2661 05 $153.23

07-2681 37

Lock Body Assemblies To Accept Arrow, Best, Falcon Interchangeable CoresPart # Function Price

07-2652 04

* 07-2662 05 $168.83

07-2682 37

Lock Body Assemblies To Accept SARENT Keso (82-) CylindersPart # Function Price

07-2653 04

* 07-2663 05 $152.48

07-2683 37

FW-Lock Body Assemblies Standard Cylinder and non cylinder FunctionsPart # Function Price07-2654 04

* 07-2664 05

07-2684 37 $148.98

* 07-2691 65, 68

FW-Lock Body Assemblies To Accept SARENT Removable Core Cylinders (60-, 63-, 64- Prefixes)Part # Function Price

07-2655 04

* 07-2665 05 $162.41

07-2685 37

FW-Lock Body Assemblies To Accept SARENT Interchangeable Core Cylinders (70-, 72-, 73- Prefixes)Part # Function Price

07-2656 04

* 07-2666 05 $178.52

07-2686 37

FW-Lock Body Assemblies To Accept SARENT Keso (82-) CylindersPart # Function Price

07-2657 04

* 07-2667 05 $162.41

07-2687 37

BL-41BORED LOCKS

7-LINE ROSES/LATCHES/PARTS



Roses 26D/10B 4, 10, 26 3, 15

07-0111 Rose Scalp (all) $34.05 $42.57 $52.50

07-2428 Outside Rose Spring Assy. (15-3) $39.73 $49.66 $58.17

Latch UnitsStandard 2-3/4" Backset 3, 4, 10, 10B, 26, 32D07-2430 Deadlocking Latch

07-2432 Latch$31.00

20 Prefix 2-3/8" Backset 3, 4, 10, 10B, 26, 32D07-2431 Deadlocking Latch

07-2433 Latch$31.00

Backset 3,4,10,10B, 26, 26DMiscellaneous Parts

Part # Description Price01-0949 Washer only – for Schlage cylinder (30 prefix) (2 required per lock) $0.68

01-4414 Screw Pan Head (#6-3/4"), (2 per lock) – surface screws $0.24

07-0100 Spacer - Cardboard $0.66

07-0102 I/S Support Plate (1-3/4" door) $6.06

07-0105 O/S Support Plate (1-3/4" door) $6.06

07-0112 Inside Rose Spring Assy. (94, 94-2) $29.72

07-0113 Outside Rose Spring Assy. ( 93, 94, 94-2) $31.21

07-2425 Inside Rose Spring Assy. (all except 94, 94-2) $45.40

07-2426 Outside Rose Spring Assy. (all except 93, 94, 94-2, 15-3) $45.40

07-2444 1-3/8" Door Mounting Kit (2 plates & 2 spacers) (1 & 20 prefix) $15.35

07-2446 Thru-Bolt Mounting Pack (standard screw pack - hollow & long screw) $7.60

* 07-2447 Dummy Thru-Bolt Mounting Pack (US3 or26D finish only) $4.52

* 08-2842 Blank Front Assembly - 94-2 function $16.70

10-0019 Cylinder Spacer - white plastic disk $0.52

10-0032 Cylinder Retainer (Standard except IC, RC & KESO Cores) $1.32

10-0043 Push pin tool $0.47

10-0058 Cylinder Retainer (Removable Core, Interchangeable Core & KESO Core) $0.40

10-0077 Lever catch spring $1.32

10-0197 Lever Retainer $0.60

10-0239 6-pin tailpiece (removable & interchangeable core) $1.50

10-0240 7-pin tailpiece (interchangeable core) $1.50

* 10-2052 Standard Screw Pack - all functions (for strike & front and surface screws) $3.98

* 10-2070 Screwpack (28- prefix) - all functions (for strike & front and surface screws) $1.72

10-2071 Screw pack (dummy trim 94 & 94-2 function) $1.32

10-2090 Cylinder retainer & washer pack (30 prefix) $7.32

10-3138 Cylinder tailpiece for 11- IC Core $1.50

*Specify finish when ordering.

BL-42BORED LOCKS

7500 PREFIXES




Prefix Description Price10 SARGENT Signature Key System Add $34.00 / cyl.11 SARGENT XC Key System (not available w/10, 22, 30, 60, 63, 64, SC, SE prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.13 Lock x 1/4" radius front, 2-1/4" x 1" with Full Lip Strike #506 No addition 14 Lock x 1/4" radius Full Lip Strike #506 only No addition 20 2-3/8" Backset Latch – Fits 1-3/8" Door No addition 21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.28 Lockset x ANSI A115.2 Strike #808 1-1/4" Lip Length No addition

Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments only Add $10.00 30 Lever to accept Schlage cylinder – no cylinder provided No addition 6573 Small Format 6 Pin Uncombinated Interchangeable Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Interchangeable Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70** Small Format Interchangeable disposable plastic construction core No addition 72** Small Format Interchangeable 6 Pin Construction Core (7-pin with 11 prefix) See page CK-2 73** Small Format Interchangeable Core, 6-Pin

(refer to CK-8 for available keyways) Includes MK and GMK keying charges Add $40.00 / cyl.737P** Small Format Interchangeable Core, 7-Pin

(refer to CK-8 for available keyways) Includes MK and GMK keying charges Add $40.00 / cyl.75* Handicap warning on inside lever Add $3.00 76* Handicap warning on outside lever Add $3.00 77* Handicap warning on both levers Add $6.00 SC Schlage C keyway cylinder, O-bitted No addition SE Schlage E keyway cylinder, O-bitted No addition

*Abrasive tape on inside of lever handle

** Prefixes not available on functions 04, 05, 37, with P & Y levers.

BL-43BORED LOCKS

7500 INTERCONNECTED LOCK


Function 3, 4, 10,Keyed – Double Locking 26D 10B, 15, 2675G04 Storeroom, Double Locking75G05 Entrance, Double Locking $349.00 $357.00 75G37 Classroom, Double Locking

Keyed – Single Locking75G15 Entrance, Single Locking $279.00 $288.00

Accessories 32D 3, 10B75-2205 Guarded Latch Assy. - 2-3/4" Backset w/1 1/8" x 2-1/4" front (standard) $28.65 $28.65 75-2206 Guarded Latch Assy. - 2-3/8" Backset w/rounded corners front (13 prefix) $28.65 $28.65 75-2207 Guarded Latch Assy. - 2-3/8" Backset w/1" x 2-1/4" front (20 prefix) $28.65 $28.65 501 Curved Lip Strike – Standard (1-1/4" Lip Length only) $4.69 $5.56 506 Radius Full Lip Strike – (14 prefix) (1-3/8" Lip Length only) $7.61 $8.48 508 Curved Lip Strike – (28 prefix) (1-3/16" Lip Length only) $9.21 $10.68 08-0055 Strike box – for standard strike

– N/C when ordered w/lock (75G04 x KL x 26D x WBX) $3.37

77-1141 Strike box – for 508 strike– N/C when ordered w/lock (75G04 x KL x 26D x WBX) $3.50

NOTE: Split finishes are available. Order outside finish/inside finish, price as higher priced finish.

Rose x Esc. Design:K (Shown)

Lever Design:LPY (Shown, handed)

September 1, 2007 | Minimum Order $250


BL-44BORED LOCKS

6500

Function Finish FinishCylinder 10B, 26D 3, 4, 10, 2665G04 Storeroom65G05 Office $218.00 $220.00 65G37 ClassroomNon Keyed65U15 Passage $140.00 138.0065G15-3 Exit or Twin Communicating $153.00 149.0065U65 Privacy $153.00 149.0065U93 Single Lever Pull $66.00 64.0065U94 Double Lever Pull $130.00 127.00NOTE: Split finishes are available – order outside/inside…price as higher price finish.Accessories 3, 4, 10

Latchbolts 10B, 32, 32D05-2182 Guarded (Standard 2-3/4" Backset) $30.65 05-2183 Unguarded (Standard 2-3/4" Backset) $26.53 05-2184 Guarded (20 Prefix 2-3/8" Backset) $30.65 05-2185 Unguarded (20 Prefix 2-3/8" Backset) $26.53 Strikes Specify Finish808 ANSI A115.2 – 4-7/8" Strike (Prefix 28-)Lip Lengths available: 1-1/8", 1-1/4"

(Standard), 1-3/8", 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Refer to page BL-52505 Full Lip Strike $7.61600 ANSI Strike A115.2 Curved Lip T Strike Refer to Page BL-5977-1141 Strike Box – for 808 Strike $3.50 05-3124 Cylinder tailpiece for 11- IC core $1.42


Prefix Description Price10 SARGENT Signature Key System Add $34.00 / cyl.11 SARGENT XC Key System (not available w/10, 22, 60, 63, 64, SC, SE, prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.14 505 Full Lip Strike No addition 20 2-3/8" Backset Latch – Fits 1-3/8" Door No addition 21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.28 Lockset x ANSI A115.2 Strike #808 – 1-1/4" standard lip

Lip Lengths 1-1/8" , or 1-3/8" No addition Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Add $10.00

60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Interchangeable Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Interchangeable Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable disposable plastic construction core No addition 72 Small Format Interchangeable 6 Pin Construction Core (7-Pin w/11- prefix) See page CK-2 73 Small Format Interchangeable Core, 6-Pin

(refer to CK-8 for available keyways) Includes MK and GMK keying charges Add $40.00 / cyl.737P Small Format Interchangeable Core, 7-Pin

(refer to CK-8 for available keyways) Includes MK and GMK keying charges Add $40.00 / cyl.75* Handicap Warning on Inside Lever Add 3.00 76* Handicap Warning Outside Lever Add 3.00 77* Handicap Warning on Both Levers Add 6.00 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage C keyway cylinder, O-bitted No addition SE Schlage E keyway cylinder, O-bitted No addition *Abrasive tape on inside of lever handle.

Rose Design:K (Shown)

Lever Design:BLP

KL shownExpect Longer Lead times (Approx 8 weeks): split finishes,65G15-3, KB & KP trims.

September 1, 2007 Minimum Order $250


BL-45BORED LOCKS

GX SERIES


UL 3-hour UL Latch Add $5.62

13 Lock x 1/4" radius front, 2-1/4" x 1" with Full lip strike #506 No addition

14 Lock x 1/4" Radius Full lip strike #506 only No addition

15 Lock x Drive-in Latchbolt (26D finish only) with #501 strike No addition

28 Lock x ANSI strike 4-7/8" x 1-1/4" with 1-1/4" lip standard #508 strike No addition

OL, OB OG, OY

Non-Keyed Functions 3, 4 26, 26D 10, 10B, 15 3, 4 26, 26D 10, 10B, 15

3U15 Passage $51.00 $51.00 $53.00 $48.00 $50.00 $53.00

3G15-3 Exit/Twin Communicating $52.00 $52.00 $55.00 $51.00 $53.00 $57.00

3U65 Privacy $52.00 $52.00 $55.00 $51.00 $53.00 $57.00

3U93 Single Lever Pull $23.00 $23.00 $24.00 $22.00 $23.00 $25.00

Note: Split finish US3 outside/US26 inside available on 3U65 function only – price at higher priced finish

No other split finishes available.

Latches

Part # Description 3, 10B, 26D

03-3120 Square Corner Latch – Standard

03-3121 1/4" Radius Latchbolt (13 prefix) $13.28

03-3122 Drive-in Latch (15 prefix) (available in 26D only)

16-0321 Plastic Filler – for use w/standard latchbolt to fit 1-1/8" wide latch door prep (no finish) $1.55

Note: Lock with US4 finish will receive US3 latch; US26 and split finish will receive US26D latch.

Strikes

Part # Description 32D 3, 10B

501 Curved Lip Strike – Standard (1-1/4" Lip Length only) $4.69 $5.56

506 Radius Full Lip Strike (14 prefix) (1-3/8" Lip Length only) $7.61 $8.48

508 Curved Lip Strike – (28 prefix) (1-3/16" Lip Length only) $9.21 $10.68

08-0055 Strike box – for standard strike – N/C when ordered w/lock (3U65 x OL x 26D x WBX) $3.37

77-1141 Strike box – for 508 strike – N/C when ordered w/lock (28-3U65 x OL x 26D x WBX) $3.50

Note: Lock with US4 finish will receive US3 strike; US26, US26D, and split finish will receive US32D strike.

OL - O-Rose, L-Lever OB - O-Rose, B-Lever OG - O-Rose, *G-Lever OY - O-Rose, *Y-Lever

*Specify hand when ordering G and Y levers.



BL-46BORED LOCKS

DL SERIES - STUDIO COLLECTIONMETRO ELEMENTS-CENTRO, ODEON SERIES


12 3 Hour UL Latch Add $5.62

14 505 Full Lip Strike No addition

20 2-3/8" backset latch with 1" front No addition

28 Strike #808. Lip length 1-1/4" Add $10.00

31 1-7/8" to 2" thick door – only centered in door No addition

TB Through-bolting (for DLU93 function only) Add $27.00 PRICE X FINISH

Non-Keyed Functions 14/26/26D 15/10B 3/4/9/10 10BL/20D/32D 32

DLU15 Passage $142.00 $149.00 $157.00 $159.00 $165.00

DLU15-3 Exit or Twin Communicating $142.00 $149.00 $157.00 $159.00 $165.00

DLU65 Privacy $151.00 $158.00 $164.00 $166.00 $174.00

DLU93 Single Lever Pull $62.00 $67.00 $71.00 $72.00 $75.00

DLU94 Double Lever Pull $116.00 $124.00 $131.00 $133.00 $140.00

Rose: TO, CO, O

Lever: Centro Series – MC, MD, MJ, MP

Odeon Series – *MN, *MH, *MK, *MS, *MU, *MV

*Specify hand when ordering

How to order: 28-DLU65 x TOMC x 26D

Prefix: 28

Function: DLU65

Rose: TO

Lever: MC

Finish: 26D

TOMC COMN OMH



BL-47BORED LOCKS

DL SERIES - STUDIO COLLECTIONMETRO ELEMENTS - AVENTURA,

NOTTING HILL, RIALTO SERIES

TOMA COMQ OMO








Non-Keyed Functions 14/26/26D 15/10B 3/4/9/10 10BL/20D/32D 32

DLU15 Passage $154.00 $161.00 $167.00 $170.00 $178.00


DLU65 Privacy $162.00 $168.00 $177.00 $179.00 $185.00



Rose: TO, CO, O

Lever: Aventura Series – MA, MB, ME, MF, MG, MI, MW

Notting Hill Series – *MQ, MR, *MT, *MM

Rialto Series – MO, *ML


How to order: 28-DLU65 x TOMA x 26D

Prefix: 28

Function: DLU65

Rose: TO

Lever: MA

Finish: 26D


BL-48BORED LOCKS

DL COASTAL SERIES










Non-Keyed Functions 26/26D 15/10B 3/4/9/10 10BL/20D

DLU15 Passage $154.00 $161.00 $167.00 $170.00

DLU15-3 Exit or Twin Communicating $154.00 $161.00 $167.00 $170.00

DLU65 Privacy $162.00 $168.00 $177.00 $179.00

DLU93 Single Lever Pull $69.00 $73.00 $76.00 $77.00

DLU94 Double Lever Pull $129.00 $135.00 $142.00 $145.00

Rose: TO, CO, O

Lever: C, G*, R, S*, Y*


How to order: 28-DLU65 x TOC x 26D

Prefix: 28

Function: DLU65

Rose: TO

Lever: C

Finish: 26D

TOY

BL-49BORED LOCKS

DL SERIES










Non-Keyed Functions 26/26D 15/10B 3/4/9/10 10BL/20D/32D 32

DLU15 Passage $142.00 $149.00 $157.00 $159.00 $165.00


DLU65 Privacy $151.00 $158.00 $164.00 $166.00 $174.00



Rose: TO, CO, O

Lever: A*, B, E, F, J, L, P, W


How to order: 28-DLU65 x TOL x 26D

Prefix: 28

Function: DLU65

Rose: TO

Lever: L

Finish: 26D

TOL

BL-50BORED LOCKS

8-LINE PREFIXES



Prefix


10s SARGENT Signature Key System Add $34.00 / cyl.11s SARGENT XC Key System (not available w/10, 22, 60, 63, 64, KESO, V-10 prefixes) No addition 21s SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) To be used on pre-est. split key system only Add $10.00 / cyl.23 Lockset x 3-3/4" Backset – 8 Line only Add $10.00 25 Lockset x 5" Backset – 8 Line only Add $16.00 28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard

Lip Lengths 1-1/8" or 1-3/8" Add $5.00 Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Add $10.00

31u For special thickness doors (Specify thickness) Doors 1-7/8" to 2-1/2" thick Add $44.00 Doors 1-3/8" - 1-3/4" x Panel one side up to 3/4" Add $131.00

36 6 Lobe security head screws Add $12.00 37 Spanner head screws Add $12.00 41s Lockset x 3/4" Throw (04, 05, 15, 15-3, 16, 26, 37, 38-2, 39, 47 Functions) – 8 Line only Add $62.00 60su SARGENT Removable Disposable Construction Core (Available C Knob Only) No addition 63su SARGENT Removable Core Cylinder (Available C Knob Only) Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges. Not available for Hotel functions64su SARGENT Removable Construction Core Cylinder (Available C Knob Only) See CK-2 74 Lead Lining I/S Rose, O/S Rose, and Latch Tube Add $120.00 /lock

(Not available in 83 or 84 Prefix)75 Knurled Inside Knob Add $78.00 76 Knurled Outside Knob Add $78.00 77 Knurled Both Knobs Add $156.00 80 Knobs to accept KESO and Keso F1 cylinders – no cylinders provided No addition 81 Knobs to accept KESO and Keso F1 removable core – no core provided No addition F182 SARGENT KESO Security Cylinder – patented – new key systems Add $47.00 /cyl.F183 SARGENT KESO Security Removable Core Cylinder – patented – new key systems Add $67.00 0/cyl.82s SARGENT KESO Security Cylinder – for existing key systems only Add $47.00 / cyl.83s SARGENT KESO Security Removable Core Cylinder – for existing key systems only Add $67.00 / cyl.84s SARGENT KESO Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SG MicroShield™ – an antimicrobial powder coat Add $21.00 VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVSs SARGENT V-10 Standard Sub-Assembled Cylinder See V-10 Cylinder SectionSpecify Abrasive Coating per Knob Add $62.00

s Prefixes not available in 50, 70, 71, 74, 75 functions.

u Prefixes not available in “B” Knob Design.

NOTE: Split finishes are available. Order outside/inside…price as higher price finish.For 9-Line stainless steel bored lock, add $177.00 to standard 8-Line price.Available in the following functions: 04, 05, 15, 16, 24, 30, 37, 44, 65, 93, 94.

SuffixCPC Clear Powder Coat over 26D/32D – 8G05 x OB x 32D x CPC Add $31.00




BL-51BORED LOCKS

8-LINE WROUGHT DESIGN

8G04 Storeroom

8G05 Office

8G37 Classroom

8G24 Dormitory

8G39 Exit

8G50 Hotel

8G54 Dormitory


Double Cylinder

8G16 Public Toilet

8G17 Asylum

8G26 Storeroom

8G30 Communicating

Non Keyed

8U15 Passage

8G13 Exit

* 8G15-3 Exit

8U65 Privacy

8U93 Dummy Trim

8U93-2 Dummy Trim

8U94 Dummy Trim

Electro-Mechanical

8G70 Fail Safe

8G71 Fail Secure

8G74 Fail Safe

8G75 Fail Secure

$483.00 $492.00 $511.00 $529.00

$574.00 $583.00 $604.00 $620.00

$581.00 $589.00 $608.00 $626.00

$520.00 $531.00 $550.00 $567.00

$390.00 $399.00 $417.00 $435.00

$440.00 $448.00 $469.00 $485.00

$158.00 $161.00 $172.00 $182.00

$322.00 $327.00 $346.00 $362.00

$821.00 $830.00 $849.00 $867.00

$839.00 $849.00 $867.00 $886.00

OB BB LB OC BC LC

Function Finish

Single Cylinder 26D 10,10B 3,4,26 10BL,20D,32,32D

O, B Roses - 2-3/4" Dia.L Rose - 3-1/2" Dia..E Rose - 3-1/8" Sq.

B - Knob - 2-1/8" Dia.C- Knob - 2-1/4" Dia.

* For 1-3/8" or 1-3/4" thick doors only. Please specify.



BL-52BORED LOCKS

8-LINE KITS/STRIKES

Lock Replacement Kits - For 7600 Integra Locks (See catalog) Finish

3,4,26,

Number Description 26D 10,10B 10BL,20D

*6010 For replacing 7600 with C768 or C769 strike $76.00 $79.00 $81.00

Specify 6010 x 800 to replace 762 strike.

6011 Lock replacement units – larger cover plates $172.00 $174.00 $178.00

6012 Lock replacement units – larger cover plates

Kits available Less strike. Specify less strike. Deduct 4.50 from Kit price.

* Retro fits lock fronts with front face of 4-1/4" x 1-1/4" and strikes 2-3/4" high (800) and 4-7/8" high (808).

Note: Must specify if intending to use with 10-Line lockset.

Strikes- Ordered Separate 10BL, 20D

Number Description 10,10B 3,4 32,32D

800 ANSI Strike A115.3 Curved Lip

Furnished with Lip Length 1 - 1/4" standard 9.68 10.51 11.22

Lip Lengths 7/8", 1" 16.56 17.19 17.83

Lip Lengths 1-1/2", 1-3/4", 2" 17.83 18.47 19.10

808 ANSI Strike A-115.2-1971 Curved Lip

With 1-1/4" Lip C to E Standard 11.22 12.63 14.03

Lip Lengths 1-1/8", 1-3/8" 17.83 18.47 19.10

Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" 32.27 33.66 35.07

08-0055 Strike box – 800 strike $3.37


Please Note: Specifying lip lengths other than listed above requires extra cost and lead times.

Refer to Prefix pages for appropriate Add if ordered with lockset.



BL-53BORED LOCKS

8-LINE LATCHES/ROSES

Latch Tube Assemblies

Standard - 2 - 3/4" Backset Specify Finish

Number Function

08-2500 U15

08-2510 G04, G05, G13, G15-3, G16, G17, G26, G30, G37, G39

08-2520 U65

08-2530 G50 $95.65

08-3364 G44, G54

08-3416 G24

08-4838 G70, G71, G74, G75

Prefix 23 - 3-3/4" Backset

08-4346 U15

08-4347 G04, G05, G13, G15-3, G16, G17, G26, G30, G37, G39

08-4348 U65

08-4349 G50 $103.37

08-4352 G44, G54

08-4353 G24

08-5018 G70, G71, G74, G75

Prefix 25 - 5" Backset

08-2501 U15

08-2511 G04, G05, G13, G15-3, G16, G17, G26, G30, G37, G39

08-2521 U65

08-2531 G50 $109.53

08-3417 G24

08-3423 G44, G54

08-5019 G70, G71, G74, G75

Prefix 41 - 2 - 3/4" Backset 3/4" Throw Latchbolt

08-2517 G04, G05, G15, G15-3, G16, G26, G37, G39 – 8 line only $171.26

Roses Price Each

Number Design 26D 10, 10B 3, 4, 26 10BL, 20D, 32, 32D

08-3312 O- Wrought $38.56 $40.11 $41.66 $43.20

08-4588 B- Wrought $38.56 $40.11 $41.66 $43.20

08-3857 E- Wrought $44.75 $46.29 $47.82 $49.37

08-3311 L- Wrought $44.75 $46.29 $47.82 $49.37



BL-54BORED LOCKS

8-LINE ASSEMBLIES

Standard Outside Cylinder Knob Assemblies

Cylinder Included Finish

Number Knob Design Function 26D 10, 10B 3, 4, 26 10BL, 20D, 32, 32D

08-2023 B

08-2024 C04, 05, 16, 24, 44

08-2033 B

08-2034 C30, 37

08-2093 B

08-2094 C26 $192.87 $195.94 $202.11 $205.21

08-2123 B

08-2124 C17

08-3374 B

08-3375 C54

08-3407 B$237.60 $242.23 $248.40 $251.50

08-3408 C50

Standard Inside Cylinder Knob Assemblies



08-2213 B

08-2214 C16

08-2223 B

08-2224 C30, 39

08-2313 B

08-2314 C26

$192.87 $195.94 $202.11 $205.21

08-2333 B

08-2334 C17

Standard Outside Non Cylinder Knob Assembly Finish

26D 10, 10B 3, 4, 26 10BL, 20D, 32, 32D

08-2003 B

08-2004 C13

08-2043 B

08-2044 C65 $146.58 $152.76 $157.38 $163.54

08-2353 B

08-2354 C94



BL-55BORED LOCKS

8-LINE ASSEMBLIES

Standard Inside Non Cylinder Knob Assembly 26D 10, 10B 3, 4, 26 10BL, 20D, 32, 32D

08-2203 B

08-2204 C15, 15-3

08-2233 B

08-2234 C50

08-2243 B

08-2244 C05,24

08-2253 B$146.58 $152.76 $157.38 $163.54

08-2254 C54, 65

08-2263 B

08-2264 C44

08-2273 B

08-2274 C04, 13

Standard KESO Security Outside Knob Assemblies_- 82-Prefix



08-3083 B

08-3084 C04, 05, 16, 24, 44

08-3103 B

08-3104 C30, 37

08-3385 B

08-3386 C54

$273.08 $279.27 $286.99 $293.16 08-3133 B

08-3134 C26

08-3153 B

08-3154 C17

08-3451 B

08-3452 C50

Standard KESO Security Inside Knob Assemblies_- 82-Prefix


Number Design Function 26D 10, 10B 3, 4, 26 10BL, 20D, 32, 32D

08-3063 B

08-3064 C17

08-3073 B

08-3074 C30, 39

08-3143 B

08-3144 C16

$273.08 $279.27 $286.99 $293.16

08-3163 B

08-3164 C26



BL-56BORED LOCKS

8-LINE ASSEMBLIES

Removable Core Keso Security Outside Knob Assemblies - 83-Prefix


Number Design Function 26D 10, 10B 3,4,26 10BL,20D,32,32D

08-3203 B 04, 05,

08-3204 C 16, 24, 44

08-3213 B

08-3214 C30, 37

08-3396 B

08-3397 C54

08-3233 B

$327.08 $330.18 $336.37 $339.44

08-3234 C26

08-3253 B

08-3254 C17

Removable Core KESO Security Inside Knob Assemblies - 83-Prefix

Cylinder Included 26D 10, 10B 3,4,26 10BL,20D,32,32D

08-3263 B

08-3264 C16

08-3273 B

08-3274 C30, 39

$327.08 $330.18 $336.37 $339.44

08-3303 B

08-3304 C17

08-4086 B

08-4087 C26

Removable Core Knob Assemblies 60-Prefix “C” Design Only - Less Core

Outside

Number Knob Design Function 26D 10, 10B 3,4,26 10BL,20D,32,32D

08-4966 C 04, 05, 16, 24, 44

08-4967 C 17

08-4968 C 26

08-4969 C 30, 37

$200.58 $203.65 $209.83 $212.93

08-4970 C 54

Inside

08-4972 C 16

08-4973 C 17

08-4974 C 26$200.58 $203.65 $209.83 $212.93

08-4975 C 30



BL-57BORED LOCKS

8-LINE PARTS

Part No Price

*01-0225 Cup Washer $2.7401-0362 Spiral Pin $0.7101-0645 Cable Clamp $1.1801-0659 Retaining Ring for Pin Asy. 60- Prefix $0.51

*01-1018 Mach Screw 1-3/4" door 10-24 x 1/2" $0.71*01-1027 Mach Screw 1-3/8" door 10-24 x 3/8" $0.7101-1070 Set Screw 4 - 40 $1.1801-1178 Clamp Screw # 8- 32 x 5/16" $0.6801-2201 Wood Screw # 4 x 1/2" $0.6801-2208 Mtg. Screw (1-3/4" doors) 1/4-20 x 1-3/8"$2.6001-3237 Mtg. Screw (1-3/8" doors) 1/4-20 x 1" $0.90

01-3337 Mach Screw 4 - 40 x 1/2" $3.1201-3582 Mach Screw 6 - 32 x 3/8" $0.71

*01-5000 Comb Screw 8 - 32 x 3/4" $0.6802-0059 Rose Wrench Tool $1.91

*06-0051 Tap Plug $11.1806-0129 Anchor Plate $5.7306-0168 Spiral Pin $0.6906-0176 Aligning Pin $1.2406-0185 Retainer Spring $0.6906-0218 Washer $0.6906-0363 Tail Spring $6.2706-0364 Tail Spring $1.24*06-2426 Rose & Support (O) Assembly $32.6008-0022 Locking Plate $2.5408-0055 Strike Box $3.3708-0100 Outside Cyl Shank $32.9608-0101 Shank $32.9608-0102 Nylon Ring, white $1.2608-0104 Shank $40.2508-0105 Shank $40.2508-0121 Sleeve $1.2608-0134 Retaining Flange $9.1208-0137 Hollow Driver $10.9508-0138 Solid Driver $3.5008-0139 Solid Driver $4.6308-0143 Retract. Driver $5.8908-0145 Driver $12.0608-0158 Push Rod $7.9808-0160 Push Rod $6.9408-0166 Retainer Ring $1.2608-0169 Key Block-out $2.9408-0174 Fastening Bracket $57.6408-0183 Visual Indicator $8.1308-0200 Cam Pin $2.9408-0212 Driver Spring $1.2608-0213 Visual Ind. Spring $0.7108-0214 Spiral Cam Spring $1.2608-0223 Bracket $7.9808-0267 Bracket Washer $0.7108-0327 Shank $32.9608-0365 Nylon Ring, black $1.26

Part No. Price

08-0407 Cylinder Spring $0.7108-0408 Cylinder Spring $1.2608-0508 Solenoid Cap $2.9408-0509 Solenoid Holder $17.2508-0515 Solid Driver, inside $11.5008-0516 Cylinder Shank $69.4408-0675 Aligning Pin $1.26

*08-2670 Aligning Tube Assembly $54.97*08-2671 Aligning Tube Assembly $54.97*08-2673 Aligning Tube Assembly $54.97*08-2674 Short Body Assembly $54.97*08-2679 Aligning Tube Assembly $54.9708-2700 Std. Cyl. Shank w/Spring & Retainer $11.0808-2777 Driver Assembly $44.1808-2780 Cam Driver Assembly $80.6508-2781 Key Driver $46.1408-2782 Driver Assembly. $66.2008-2831 Locking Spindle $32.9608-2832 Locking Spindle $32.96

*08-2840 Locking Body $57.64*08-2841 Blank Front $16.70*08-2877 Screw Pack $11.5008-2879 Screw Pack $2.94

*08-3315 Blank Rose “O” $29.3308-3366 Driver Assembly. $80.6508-3788 Screw Pack $4.6308-4082 Locking Driver $63.25

*08-4320 Plain Knob “B” $66.64*08-4321 Cylinder Knob “B” $66.64*08-4324 Aligning Tube Assembly $57.64*08-4326 Turn Button & Tail $17.25*08-4327 Push Button & Tail $17.25*08-4328 Univ Button & Tail $17.25*08-4329 Hotel Button & Tail $20.21*08-4330 Emerg Button & Tail $17.2508-4333 Driver Assembly. $46.14

*08-4455 Aligning Tube Assembly $57.6408-4687 Solenoid Assembly (71, 75) Secure $493.3008-4688 Solenoid Assembly (70, 74) Safe $493.3008-4697 Key Driver Assembly $5.8908-4715 Key Driver Assembly $5.89

*08-4732 Scalp & Aligning Tube Assembly $115.44*08-4733 Scalp & Aligning Tube Assembly $115.4408-4796 Cyl. Ext Pin Asy. - 60- Prefix $30.4409-0003 Ret Driver Washer $1.3509-0019 Knob Retainer $1.3509-0277 Ret Driver Spring $1.35

*76-0027 Knob Collar (for “B” Knob) $9.87*76-0040 Knob Collar (for “C” Knob) $8.6276-0563 Knob Pin $0.33

*76-2043 Cylinder Knob “C” $66.64*76-2123 Plain Knob “C” $66.64

* Finish required when ordering.

BL-58BORED LOCKS

6-LINE PREFIXES/STRIKES



Prefix

Number Variations Price

10s SARGENT Signature Key System Add $34.00 / cyl.

11s SARGENT XC Key System (not available w/10, 22, 60, 63, 64, VA, VS prefixes) No addition

13 Lockset x Front & Strike 2-1/4" with 1/4" Radius (2-3/8" Backset Only) No addition

14 1/4" radius full lip strike No addition

15 Drive-In Guarded latchbolt (2-3/8" Backset Only) No addition

17 Lockset x 2-3/4" Backset x 2-1/4" x 1" Front Add $3.00

21s SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.

22s SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.

23 Lockset x 3-3/4" Backset x 2-1/4" x 1-1/8" Front Add $3.00

24 Lockset x 2-3/4" Backset x 2-1/4" x 1-1/8" Front No addition

25 Lockset x 5" Backset x 2-1/4" x 1-1/8" Front Add $19.00

28 Lockset x ANSI A-115.2 Strike - #808 – 1-1/4" Lip Standard

Lip Lengths 1-1/8", or 1-3/8" No addition

Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" Add $10.00

36 6 Lobe security head screws Add $12.00

37 Spanner head screws Add $8.00

60s SARGENT Removable Disposable Construction Core (Available S Knob Only) No addition

63s SARGENT Removable Core Cylinder (Available S Knob Only) Add $44.00 / cyl.

Includes masterkeying and grand masterkeying charges. Not available for Hotel functions

64*s SARGENT Removable Construction Core Cylinder (Available S Knob Only) See CK-2 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.

SC Schlage C Keyway Cylinder, 0-bitted No addition

SE Schlage E Keyway Cylinder, 0-bitted No addition

SG MicroShield™ – an antimicrobial powder coat Add $21.00

VAs SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

VSs SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder Section

Specify Abrasive Coating per Knob Add $33.00

s Prefixes not available for 50 function

BL-59BORED LOCKS

6-LINE – KNOB DESIGN



6G04 Storeroom

6G05 Office

6G37 Classroom

6G24 Dormitory

6G38-2 Twin Communicating

6G50 Hotel

Non Keyed

6U15 Passage

6G15 Passage

6G15-3 Exit

6U65 Privacy

6G75-2 Twin Communicating

6U93 Single Knob Pull

6U94 Double Knob Pull

Function O, B - Rose / B, S, Knob E, L - Rose / B, S - Knob

Finish

Single Cylinder

OB EB

26D 3, 4, 10, 10B, 26 26D 3, 4, 10, 10B, 26

$181.00 $185.00 $199.00 $205.00

$215.00 $220.00 $234.00 $240.00

$116.00 $122.00 $133.00 $138.00

$133.00 $138.00 $152.00 $158.00

$135.00 $142.00 $154.00 $160.00

$56.00 $58.00 $66.00 $70.00

$112.00 $119.00 $131.00 $135.00

NOTE: Split finish is available. Order outside/inside…price as higher price finish.

Strikes

Number Description 3, 4, 10, 10B, 32, 32D

600 ANSI Strike Curved Lip (Standard with lock)

Furnished with Lip Length 1-1/4" Standard $10.91Each

Lip Lengths 1", 1-1/2", 1-3/4" or 2" 10.91 Each

Lip Lengths 2-1/4", 2-1/2", 2-3/4", or 3" 16.38 Each

808 ANSI Curved Lip (28- Prefix)

Lip Length 1-1/4" Standard

Lip Lengths 1-1/8" or 1-3/8" Refer to page BL-52 for pricing

Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-5/8", 2-7/8"

08-0055 Strike box – standard $3.37


Number Description 32D 3, 4, 10, 10B, 32

506 Full Lip Strike (14 Prefix) $7.61 $8.48

* Handed – please specify hand when ordering.

BL-60BORED LOCKS

6-LINE LATCHES/DOOR KIT



Latch Tubes Specify Finish

Standard 2 - 3/8" Backset x 2 - 1/4" x 1" Front 3, 4, 10, 10B, 32, 32D

06-5083 Guarded $33.02

06-5225 Unguarded $27.29

13 Prefix - 2 - 3/8" Backset x 2 - 1/4" x 1" x 1/4" Radius Front 3, 4, 10, 10B, 32D

06-5085 Guarded $33.02

06-5227 Unguarded $27.29

15- Prefix - Drive - in 2-3/8" Backset 32D

06-5100 Guarded $33.02

17 Prefix - 2 - 3/4" Backset x 2 - 1/4" x 1" Front 3, 4, 10, 10B, 32D

06-5102 Guarded $37.11

06-5234 Unguarded $31.38

23 Prefix - 3 - 3/4" Backset x 2 - 1/4" x 1 - 1/8" Front 3, 4, 10, 10B, 32D

06-5096 Guarded $37.11

06-5232 Unguarded $31.38

24 Prefix - 2 - 3/4" Backset x 2 - 1/4" x 1 - 1/8" Front 3, 4, 10, 10B, 32D

06-5094 Guarded $33.02

06-5231 Unguarded $27.29

25 Prefix - 5" Backset x 2 - 1/4" x 1 - 1/8" Front 3, 4, 10, 10B, 32D

06-5098 Guarded $57.57

06-5233 Unguarded $51.85

Latch Extension

06-5055 For 5" Latch Assembly $33.02

Latch Tube Sleeve

06-0578 $2.74

Miscellaneous 26D 3, 10, 10B, 26

530 Rabbeted Door Kit $49.00 $55.00

BL-61BORED LOCKS

6-LINE PARTS



Part No. Price

01-1156 Mounting Screw $0.51

.01-1168 Mounting Screw $0.54

.01-1169 Mounting Screw $0.90

*01-5000 Mounting Screw $0.68

*06-0500 Cylinder Knob “B” O/S + I/S $26.75

*06-0501 Button Knob “B” O/S + I/S $26.75

*06-0502 Plain Knob “B” O/S + I/S $26.75

*06-0503 Cylinder Knob “S” O/S + I/S $26.75

*06-0504 Button Knob “S” O/S + I/S $26.75

*06-0505 Plain Knob “S” O/S + I/S $26.75

*06-0512 Knob Collar “B” $5.73

.06-0525 Knob Catch Stop $2.86

*06-0528 Knob Collar “S” $5.73

*06-0603 Rem. Core Knob “S” O/S + IS LH $26.75

*06-0604 Rem. Core Knob “S” O/S + IS RH $26.75

.06-0611 Spacer - Rem. Core $4.64

*06-2675 Screw Pack (Except 75-2, 93, 94) $4.37

*06-5001 Inside Rose Assembly “E” $54.57

*06-5002 Inside Rose Assembly “L” $54.57

.06-5003 Mtg. Plate (B+O Rose) $6.82

*06-5005 Outside Rose “B” $17.74

*06-5006 Outside Rose “O” $17.74

*06-5011 Lockbody (B, S-Knob) 15 $110.53

*06-5012 Lockbody (S-Knob) 05 $110.53

*06-5013 Lockbody (S-Knob) 24 $110.53

*06-5016 Lockbody (S-Knob) 04 $110.53

*06-5017 Lockbody (B, S-Knob) 15-3 $110.53

*06-5018 Lockbody (S-Knob) 38-2 $110.53

*06-5019 Lockbody (S-Knob) 65 $110.53

*06-5020 Lockbody (S-Knob) 75-2 $110.53

*06-5040 Lockbody (B-Knob) 05 $99.59

*06-5041 Lockbody (B-Knob) 24 $99.59

*06-5043 Lockbody (B-Knob) 50 $99.59

*06-5044 Lockbody (B-Knob) 65 $99.59

*06-5045 Lockbody (B-Knob) 75-2 $99.59

*06-5054 Blank Rose “B” (15-3 function) $13.66

.06-5056 Lockset Screw Pack (Standard) $3.54

.06-5057 Turn Knob Assembly Screw Pack $5.73

*06-5058 Dummy Trim Lg Rose Screw Pk $1.49

.06-5059 Dummy Trim Reg Rose Screw Pk $1.49

.06-5069 Mounting Plate “E, L” $34.12

*06-5129 Inside “O” Rose Assy $17.74

*06-5130 Inside “B” Rose Assy $17.74

*06-5149 Lockbody Rem. Core (S-Knob)-04 LH $115.97

Note: Rose designs “B” and “O” are not interchangeable with “E” and “L” designs. They require different lock bodies.

*Specify hardware finish required. Consult catalog for available finishes

Note: All parts listed below are for product manufacturing after January, 2003

*06-5150 Lockbody Rem. Core (S-Knob)-04 RH $115.97





06-5147 Pin Asy. - Rem. Core $10.65

*06-5181 Plain-SL Lever (OSL Trim) O/S + I/S $57.99

*06-5182 Button-SL Lever (OSL Trim) O/S + I/S $57.99

*06-5215 Lockbody (S-Knob) 37 $110.52



*06-5240 Lockbody (B-Knob) 37 $99.59

*06-5241 Lockbody (B-Knob) 38-2 $99.59

*06-5349 Turn Button Assembly $1.70


14-0299 Lock-Out Key (50 function) $3.57

14-0300 Emergency Key $0.42

Part No. Price

BL-62BORED LOCKS

5500-KNOB LINE



55G04 Storeroom

55G05 Office $76.00

55G37 Classroom

Non Keyed 3, 32D

55U15 Passage $51.00

55U65 Privacy $53.00

55U93 Single Knob Pull $30.00

Parts 3 32D

05-2184 2-3/8" Backset guarded latch (20- prefix) $30.65 $30.65

05-2185 2-3/8" Backset unguarded latch (20- prefix) $26.53 $26.53

05-2182 2-3/4" Backset guarded latch (standard) $30.65 $30.65

05-2183 2-3/4" Backset unguarded latch (standard) $26.53 $26.53

505 Full lip strike (14- prefix) $7.61 $7.61

500 Curved lip strike (standard) $4.56 $4.56

808 ANSI Strike Curved lip (28- prefix), Lip Lengths 1-1/4" standard $12.63 $14.03

NOTES: Specify “LC” for less cylinder. $0.00 deduct for less cylinder. Standard cylinder prep only.

Function Finish

Single Cylinder 3, 32D



14 Full Lip Strike #505 No addition

20 2-3/8" Backset No addition

21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 / cyl.

22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl.

28 Lockset x ANSI A-115.2 Strike #808 – 1-1/4" Lip Standard No addition

SC Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition

OB


MORTISE LOCKS

TABLE OF CONTENTSApril 15, 2008 | Minimum Order $250

MORTISE LOCKS 7800/8200

How to Order/ANSI Finish & Function Comparison.................ML-1

8200-Line

Prefixes ....................................................................................ML-2

8200: Rose x A, E, F, W Levers ...............................................ML-3

Prefixes ....................................................................................ML-4

8200: Rose x B, L, P Levers ....................................................ML-5

Prefixes ....................................................................................ML-6

8200: Rose x J Lever ...............................................................ML-7

Prefixes ....................................................................................ML-8

8200: LE1, LE2, LE3, LE4 Escutcheon x A, B, E, F, J, L, P, W Levers...............................ML-9

Prefixes ..................................................................................ML-10

8200: LW1 Escutcheon x A, B, E, F, J, L, P, W Levers ..........ML-11

Prefixes ..................................................................................ML-12

8200: WT Escutcheon x A, B, E, F, J, L, P, W Lever............. ML-13

Prefixes ..................................................................................ML-14

8200: LS Escutcheon x A, B, E, F, J, L, P, W Levers .............ML-15

8200 Freewheeling Prefixes...................................................ML-16

8200: Freewheeling FE Escutcheon x A, B, E, F, J, L, P, W Levers.............................ML-17

Prefixes ..................................................................................ML-18

8200: Coastal Series Design - Rose x Lever .........................ML-19

Prefixes ..................................................................................ML-20

8200: Coastal Series Design - Escutcheon x Lever...............ML-21

8200 Studio Collection-Metro Elements

8200 Studio Collection-Metro Elements Prefixes...................ML-22

8200 Studio Collection-Metro Elements.................................ML-23

8200 Studio Collection-Metro Elements Prefixes...................ML-24

8200 Studio Collection-Metro Elements.................................ML-25

7800-Line

Prefixes ..................................................................................ML-26

7800: Rose x B, C Knob ........................................................ML-27

Prefixes ..................................................................................ML-28

7800: KW1, KE1, KE2, KE3, KE4 Escutcheon x B, C Knob ........................................................ML-29

Prefixes ..................................................................................ML-30

7800: WT Escutcheon x B, C Knob .......................................ML-31

Prefixes ..................................................................................ML-32

7800: WT Escutcheon x N Knob............................................ML-33

Prefixes ..................................................................................ML-34

7800: KS Escutcheon x K Knob.............................................ML-35

Prefixes ..................................................................................ML-36

7800: PT Hospital Push/Pull ..................................................ML-37

Prefixes ..................................................................................ML-38

7800: SL Rose x D Knob .......................................................ML-39

8200 Deadlocks .....................................................................ML-40

Distributor Bulk Pack Trim Program

Features .................................................................................ML-41

8200/7800 Lockbodies ...........................................................ML-42

8200 Trim Packs.....................................................................ML-43

8200 7800 Trim Packs............................................................ML-44

7800/8200 Lockbodies ...........................................................ML-45

7800/8200 Working Trim Sets

8200 Trim Set Program Features ...........................................ML-46

8200 Inside Trim Set ..............................................................ML-47


8200 Inside trim Set ...............................................................ML-49

8200 Outside Trim Set............................................................ML-50








7800/8200 Assemblies & Parts

8200 Levers............................................................................ML-58

8200 Levers............................................................................ML-59

8200 Milled Levers & 7800 Knobs .........................................ML-60

8200/7800 Inside Escutcheons..............................................ML-61

8200/7800 Inside Escutcheons..............................................ML-62

8200/7800 Outside Escutcheons ...........................................ML-63

8200/7800 Outside Escutcheons ...........................................ML-64

7800/8200 Roses/Turns .........................................................ML-65

7800/8200 Mounting Kits .......................................................ML-66

8200 Strikes & 7700/8100 Spindles/Strikes...........................ML-67


MORTISE LOCKS

TABLE OF CONTENTSApril 15, 2008 | Minimum Order $250

8200/7800 Parts

01-0010 to 78-0299................................................................ML-68

78-0300 to 82-0539................................................................ML-69

82-0541 to 97-0478................................................................ML-70

MORTISE LOCKS 7900

How to Order/ANSI Finish & Function Comparison...............ML-71

7900 Mortise Lock

7900 Series Lever Locks Prefixes..........................................ML-72

7900 Series Rose x Levers....................................................ML-73

7900 Series LW1 Escutcheon Lever Locks Prefixes .............ML-74

7900 Series LW1 Escutcheon Lever Locks ...........................ML-75

7900 Series WT Escutcheon Lever Locks Prefixes ...............ML-76

7900 Series WT Escutcheon Lever Locks .............................ML-77

7900 Series Studio Collection Metro Elements Lever Locks Prefixes....................................ML-78

7900 Series Studio Collection Metro Elements Lever Locks..................................................ML-79

7900 Series Studio Collection Metro Elements Escutcheon Lever Locks Prefixes................ML-80

7900 Series Studio Collection Metro Elements Escutcheon Lever Locks..............................ML-81

7900 Series Knob Locks Prefixes ..........................................ML-82

7900 Series Rose x B Knob .................................................ML-83

7900 Series KW1 Escutcheon Knob Lock Prefixes ...............ML-84

7900 Series KW1 Escutcheon Knob Lock .............................ML-85

7900 Series WT Escutcheon Knob Lock Prefixes .................ML-86

7900 Series WT Escutcheon Knob Lock ...............................ML-87

HIGH SECURITY MORTISE LOCK 9200

How to Order - ANSI Finish & Function Comparison 9200 and M9200 - Levers..................................ML-89

9200 and M9200 - Levers

Prefixes-9200 .........................................................................ML-90

9200: LN, L, Rose x B, J, L, P Levers....................................ML-91

Prefixes-9200 .........................................................................ML-92

9200: SN, SL, Rose x B, J, L, P Levers .................................ML-93

Prefixes ..................................................................................ML-94

9200: LE3, LE4 Escutcheon x B, J, L, P Levers ....................ML-95

Prefixes-9200 .........................................................................ML-96

9200: LS Escutcheon x B, J, L, P Levers...............................ML-97

9200 & M9200 - Knobs

Prefixes-9200 .........................................................................ML-98

9200: SL, SN, Rose x K Knob ...............................................ML-99

Prefixes-9200 .......................................................................ML-100

9200: LS Escutcheon x K Knob ...........................................ML-101

Prefixes-9200 ........................................................................ML102

9200: SL Rose x D Knob .....................................................ML-103

9200 Deadlock/Lock Bodies ................................................ML-104

9200 Parts............................................................................ML-105

9200 Inside Trim Set ............................................................ML-106

9200 Outside Trim Set..........................................................ML-107


ML-1MORTISE LOCKS

GENERAL INFORMATION April 15, 2008 | Minimum Order $250

15 F01 US3 605 Polished brass, clear coated68 F02 US4 606 Satin brass, clear coated05, 55 F04 US9 611 Polished bronze, clear coated37 F05 US10 612 Satin Bronze, clear coated89 F06 US10B 613 Oxidized Satin Bronze/Oil Rubbed04 F07 US10BL --- Oxidized Satin Bronze, clear coated47 F08/F10 US15 619 Satin nickel, clear coated14 US14 618 Bright nickel, clear coated16 F09 US20D --- Statuary dark bronze, clear coated46 F11 US26 625 Polished chrome45 F12 US26D 626 Satin chrome25 F13 US32 629 Polished stainless steel26 F14 US32D 630 Satin stainless steel50 F1522 F1621 F1720 F1866 F1943 F2024 F2165 F2267 F2603 F2917 F3013 F3138 F3239 F3340 F3448 F35


Function

SARGENT ANSI

How to Order




Product Series 8200 Levers, 7800 Knobs 10 Ea. 75-82

Function Consult catalog for functions available 10 Ea. 75-8205

Trim Consult catalog for trims available 10 Ea. 75-8205 LNL

Finish Consult catalog for finishes available 10 Ea. 75-8205 LNL US26D

Hand Consult catalog for handing requirements 10 Ea. 75-8205 LNL US26D RH

Options Consult factory for options available 10 Ea. 75-8205 LNL US26D RH x 1 3/8" Lip Strike

When ordering split finishes specify outside finish first 10 Ea. 75-8205 LNL US3 x US26D RH

To price split trim/finish, defaults to higher price.Locksets in combinations not listed should be figured by adding together the prices of the component parts.If by any method of figuring, lower prices can be obtained than set prices shown, set prices will prevail.It is not permissible to take full deduction for omission of a component from a lockset.Prices are for 1-3/4" door. For other door thicknesses not listed herein, please consult factory.

Finish

SARGENT ANSI Description

Refer to ML-41 for multi-function cross-reference



ML-2MORTISE LOCKS

PREFIXES

PrefixNumber Description Price1*s 8200 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 3* Stainless Steel Hubs Add $55.00 3P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4 7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E

- Cylinders - IMPORTANT- See catalog 7800/8200 prefix page for cylinder limitations- Below charges DO NOT include additional charges for special cylinder requirementsDoors up to 2-1/2" thick - lock centered No addition Doors 2-5/8" to 6" thick OR doors 1-3/4" thick w/max 1" paneling one side.For example: Specify 1-3/4" door with panel (Side) on inside or outside Non Keyed function Add $44.00

Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 49 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims CR, E, L, LN, O, TR

– Available with 26, 29, 38, 39 40, 41 functions – Rose Trim 8200 LN Add $60.00 49 Occupancy Indicator with emergency Release

– Available with 65, 66, 68 functions; Rose Trims 7800 CR, E, L, LN, O, TR Add $60.00 50* Secured Indicator Rose – for doors 1-5/8" to 2-1/4" thick

– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK 8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

NOTESAbrasive Coating Add $33.00 per Lever.s Prefixes not available with a standard 50 function lockout cylinder.* Not available with 3P- prefix† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LNA x RH x 32D x CPC Add $31.00



ML-3MORTISE LOCKS

8200

LNA(Handed) LNWLNFLNE

Rose: O, E, L, LN (Shown) Levers: A, E, F, W (All Shown)

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$607.00 $612.00 $625.00 $638.00 $650.00

$621.00 $625.00 $640.00 $650.00 $665.00

$638.00 $643.00 $655.00 $668.00 $679.00

$658.00 $665.00 $677.00 $690.00 $702.00

$668.00 $673.00 $686.00 $697.00 $711.00

$679.00 $686.00 $700.00 $711.00 $723.00

$792.00 $797.00 $810.00 $823.00 $835.00

$846.00 $850.00 $863.00 $876.00 $888.00

$509.00 $515.00 $527.00 $539.00 $551.00

$572.00 $576.00 $590.00 $602.00 $617.00 $592.00 $600.00 $612.00 $623.00 $638.00 $201.00 $203.00 $213.00 $217.00 $223.00 $401.00 $407.00 $421.00 $431.00 $445.00 $258.00 $262.00 $268.00 $272.00 $280.00 $459.00 $465.00 $478.00 $490.00 $502.00 $509.00 $515.00 $527.00 $539.00 $551.00

Single Cyl8204 Storeroom or Closet8205 Office or Entry8237 Classroom8255 Office or Entry8206 Storeroom or Service8231 Utility8236 Closet8256 Office or Inner Entry8267 Institutional Privacy8289 Holdback8291 All Purpose HoldbackSingle Cyl With Deadbolt8224 Room Door8225 Dormitory or Exit8227 Closet or Storeroom8228, 8230 Dummy Trim Deadlock8235 Storeroom8243 Apartment Corridor8245 Dormitory or Exit8247 Front Door or Apartment Corridor8251 Storeroom Deadbolt8250 Hotel Guest LockDouble Cyl No Deadbolt8216 Apartment or Exit or Public Toilet8217 Asylum or Institutional8238 Classroom Security Instruder8259 School Security8290 Classroom Security Holdback8292 All Purpose HoldbackDouble Cyl With Deadbolt8226 Store Door8229 Dummy Trim Deadlock8239, 8240 Classroom Security Instruder8241 Classroom Security8246 Dormitory or Exit8248 Store Door8249 Security Deadbolt8252 InstitutionalElectro Mechanical Single Cyl – Specify 12V or 24V8270-12V / 8270-24V Fail Safe8271-12V / 8271-24V Fail SecureElectro Mechanical Double Cyl – Specify 12V or 24V8272-12V / 8272-24V Fail Safe8273-12V / 8273-24V Fail SecureNon Keyed8213 Communication or Exit8215 Passage or Closet8265 Privacy Bedroom or Bath (Latch)8266, 8268 Privacy Bedroom or Bath (Deadbolt)8293* Single Dummy Trim8294 Double Dummy Trim8295 Single Dummy Trim w/Lockbody8296 Double Dummy Trim w/Lockbody8297 Double Dummy w/Active Trim

*“A” Lever Only—Specify hand and if for inside or outside of door, when ordering.

Function Finish

September 1, 2007Minimum Order $250



ML-4MORTISE LOCKS

PREFIXES



Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 49 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims 7800 CR, E, L, LN, O, TR



– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

NOTESAbrasive Coating Add $33.00 per Lever.

s Prefixes not available with standard 50 function lockout cylinder.* Not available with 3P- prefix† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LNL x 32D x CPC Add $31.00



ML-5MORTISE LOCKS

8200September 1, 2007

Minimum Order $250

LNB LNPLNL

Rose: O, E, L, LN (Shown) Levers: B, L, P (All shown)

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$583.00 $588.00 $602.00 $612.00 $625.00

$594.00 $602.00 $617.00 $625.00 $640.00

$612.00 $619.00 $632.00 $643.00 $655.00

$635.00 $640.00 $653.00 $665.00 $677.00

$643.00 $647.00 $662.00 $673.00 $686.00

$655.00 $662.00 $675.00 $686.00 $700.00

$769.00 $773.00 $787.00 $797.00 $810.00

$822.00 $826.00 $840.00 $850.00 $863.00

$485.00 $490.00 $502.00 $515.00 $527.00

$546.00 $551.00 $567.00 $576.00 $590.00 $569.00 $574.00 $588.00 $600.00 $612.00 $188.00 $190.00 $198.00 $203.00 $213.00 $378.00 $383.00 $393.00 $407.00 $421.00 $246.00 $250.00 $256.00 $262.00 $268.00 $437.00 $441.00 $453.00 $465.00 $478.00 $485.00 $490.00 $502.00 $515.00 $527.00

Single Cyl8204 Storeroom or Closet8205 Office or Entry8237 Classroom8255 Office or Entry8206 Storeroom or Service8231 Utility8236 Closet8256 Office or Inner Entry8267 Institutional Privacy8289 Holdback8291 All Purpose HoldbackSingle Cyl With Deadbolt8224 Room Door8225 Dormitory or Exit8227 Closet or Storeroom8228, 8230 Dummy Trim Deadlock8235 Storeroom8243 Apartment Corridor8245 Dormitory or Exit8247 Front Door or Apartment Corridor8251 Storeroom Deadbolt8250 Hotel Guest LockDouble Cyl No Deadbolt8216 Apartment or Exit or Public Toilet8217 Asylum or Institutional8238 Classroom Security Instruder8259 School Security8290 Classroom Security Holdback8292 All Purpose HoldbackDouble Cyl With Deadbolt8226 Store Door8229 Dummy Trim Deadlock8239, 8240 Classroom Security Instruder8241 Classroom Security8246 Dormitory or Exit8248 Store Door8249 Security Deadbolt8252 InstitutionalElectro Mechanical Single Cyl – Specify 12V or 24V8270-12V / 8270-24V Fail Safe8271-12V / 8271-24V Fail SecureElectro Mechanical Double Cyl – Specify 12V or 24V8272-12V / 8272-24V Fail Safe8273-12V / 8273-24V Fail SecureNon Keyed8213 Communication or Exit8215 Passage or Closet8265 Privacy Bedroom or Bath (Latch)8266, 8268 Privacy Bedroom or Bath (Deadbolt)8293 Single Dummy Trim8294 Double Dummy Trim8295 Single Dummy Trim w/Lockbody8296 Double Dummy Trim w/Lockbody8297 Double Dummy w/Active Trim

Function Finish



ML-6MORTISE LOCKS

PREFIXES

PrefixNumber Description Price1*s 8200 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 3* Stainless Steel Hubs Add $55.00 3P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4 7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 49 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims CR, E, L, LN, O, TR


– Available with 65, 66, 68 functions; Rose Trims CR, E, L, LN, O, TR Add $60.00 50* Secured Indicator Rose – for doors 1-5/8" to 2-1/4" thick

– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section


s Prefixes not available with standard 50 function lockout cylinder.* Not available with 3P- prefix.† Not available with 60, 63, 64 prefixes.

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LNJ x 32D x CPC Add $31.00




LNJRose: O, E, L, LN (Shown) Lever: J (Shown)

ML-7MORTISE LOCKS

8200

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$492.00 $496.00 $512.00 $521.00 $537.00

$504.00 $512.00 $525.00 $537.00 $549.00

$521.00 $527.00 $541.00 $551.00 $567.00

$544.00 $549.00 $563.00 $574.00 $588.00

$551.00 $557.00 $572.00 $583.00 $594.00

$567.00 $572.00 $586.00 $594.00 $609.00

$677.00 $681.00 $697.00 $706.00 $722.00

$730.00 $734.00 $750.00 $759.00 $775.00

$393.00 $399.00 $414.00 $423.00 $439.00

$456.00 $461.00 $475.00 $488.00 $500.00 $478.00 $485.00 $496.00 $509.00 $521.00 $142.00 $147.00 $152.00 $158.00 $166.00 $287.00 $292.00 $307.00 $317.00 $330.00 $201.00 $203.00 $213.00 $217.00 $223.00 $346.00 $350.00 $364.00 $373.00 $389.00 $393.00 $399.00 $414.00 $423.00 $439.00


Function Finish


ML-8MORTISE LOCKS

PREFIXES

PrefixNumber Description Price1*s 8200 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 3* Stainless Steel Hubs Add $55.00 3P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (for existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 Escutcheon VariationsStandard Cylinder LE2 x concealed mounting $16.00 Non-Keyed Function LE2 x concealed mounting $16.00 Cylinder Barrel Only LE3 x exposed screws (not avail. in double cyl. functions) $50.00 SetNon-Keyed Function LE3 x exposed screws $16.00 Cylinder Barrel Only LE4 x concealed mounting (not avail. in double cyl. functions $50.00 Non-Keyed Function LE4 x concealed mounting $16.00 NOTESAbrasive Coating Add $33.00 per Lever.s Prefixes not available with standard 50 function lockout cylinder.* Not available with 3P prefix.† Not available with 60, 63, 64 prefixes.SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LE1L x RH x 32D x CPC Add $31.00



LE1A(Handed) LE1JLE1L

LE1 Escutcheon Prices shownLE2, LE3, LE4 Escutcheons – refer to ML-8 for add• A-B-E-F-J-L-P-W Levers


ML-9MORTISE LOCKS

8200 September 1, 2007

Minimum Order $250

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$614.00 $621.00 $634.00 $646.00 $661.00

$627.00 $634.00 $646.00 $661.00 $674.00

$644.00 $649.00 $664.00 $676.00 $691.00

$667.00 $672.00 $685.00 $697.00 $712.00

$674.00 $679.00 $693.00 $708.00 $720.00

$687.00 $693.00 $708.00 $720.00 $734.00

$799.00 $806.00 $820.00 $831.00 $847.00

$852.00 $817.00 $873.00 $884.00 $900.00

$517.00 $522.00 $537.00 $550.00 $563.00

$579.00 $586.00 $598.00 $612.00 $625.00 $601.00 $601.00 $621.00 $634.00 $646.00 $206.00 $208.00 $216.00 $222.00 $228.00 $411.00 $418.00 $431.00 $443.00 $457.00 $263.00 $265.00 $271.00 $279.00 $287.00 $469.00 $474.00 $488.00 $500.00 $515.00 $517.00 $522.00 $537.00 $550.00 $563.00


*“A” Lever Only—Specify hand and if for inside or outside of door, when ordering.Refer to ML-8 for LE2, LE3, LE4 escutcheon add.

Function Finish


ML-10MORTISE LOCKS

PREFIXESApril 15, 2008 | Minimum Order $250



Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LW1L x RH x 32D x CPC Add $31.00


ML-11MORTISE LOCKS

8200


LW1A(Handed) LW1JLW1L

LW1 Escutcheon • A-B-E-F-J-L-P-W Levers

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$593.00 $598.00 $613.00 $626.00 $641.00

$607.00 $613.00 $626.00 $641.00 $654.00

$624.00 $628.00 $643.00 $657.00 $672.00

$645.00 $651.00 $665.00 $678.00 $694.00

$654.00 $659.00 $674.00 $686.00 $701.00

$669.00 $674.00 $686.00 $701.00 $716.00

$778.00 $783.00 $798.00 $811.00 $826.00

$831.00 $836.00 $851.00 $864.00 $879.00

$494.00 $499.00 $513.00 $526.00 $541.00

$555.00 $564.00 $576.00 $591.00 $604.00 $579.00 $587.00 $598.00 $613.00 $626.00 $191.00 $197.00 $203.00 $212.00 $217.00 $387.00 $392.00 $406.00 $419.00 $435.00 $252.00 $255.00 $262.00 $268.00 $275.00 $444.00 $449.00 $464.00 $476.00 $492.00 $494.00 $499.00 $513.00 $526.00 $541.00



Function Finish



ML-12MORTISE LOCKS


PrefixNumber Description Price1*s 8200 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 3* Stainless Steel Hubs Add $55.00 3P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 TL SARGuide™ – Illuminated escutcheon – refer to catalog for function limitations – not available w/RX & DX prefix Add $208.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 8205 x WTL x RH x 32D x CPC Add $31.00



ML-13MORTISE LOCKS


Minimum Order $250

WT Escutcheon • A-B-E-F-J-L-P-W Levers WTLWTA WTJ

4/26D 10/10B 3/9/15/26 10BL/20D/32D 32

$579.00 $586.00 $600.00 $612.00 $625.00

$592.00 $600.00 $612.00 $625.00 $640.00

$609.00 $617.00 $628.00 $643.00 $655.00

$632.00 $638.00 $650.00 $665.00 $677.00

$640.00 $645.00 $658.00 $673.00 $686.00

$653.00 $658.00 $673.00 $686.00 $700.00

$764.00 $771.00 $785.00 $797.00 $810.00

$817.00 $824.00 $838.00 $850.00 $863.00

$482.00 $488.00 $500.00 $515.00 $527.00

$544.00 $549.00 $563.00 $576.00 $590.00 $567.00 $572.00 $586.00 $600.00 $612.00 $187.00 $185.00 $197.00 $203.00 $213.00 $373.00 $381.00 $393.00 $407.00 $421.00 $245.00 $249.00 $255.00 $262.00 $268.00 $431.00 $439.00 $451.00 $465.00 $478.00 $482.00 $488.00 $500.00 $515.00 $527.00


* “A” Lever Only – Specify hand and if for inside or outside of door, when ordering.

Function Finish


ML-14MORTISE LOCKS



3* Stainless Steel Hubs Add $55.00 3P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Milled inside lever Add $56.00 76 Milled outside Lever Add $56.00 77 Milled both levers Add $112.00 F182 SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 cyl.82 SARGENT KESO Security Cylinder (For existing systems only) Add $47.00 cyl.BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 SCs Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish $31.00


s Prefixes not available with standard 50 function lockset cylinders.* Not available with 3P prefix.

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x LSL x RH x 32D x CPC Add $31.00



ML-15MORTISE LOCKS

8200April 15, 2008 | Minimum Order $250

Function Finish

LS

LS Escutcheon • A-B-E-F-J-L-P-W Levers

4/26D 10/10B 3/9/15/26 32D 32

$944.00 $956.00 $960.00 $977.00 $992.00

$960.00 $967.00 $972.00 $992.00 $1,007.00

$974.00 $985.00 $990.00 $1,009.00 $1,022.00

$997.00 $1,007.00 $1,011.00 $1,031.00 $1,044.00

$1,007.00 $1,013.00 $1,018.00 $1,039.00 $1,054.00

$1,018.00 $1,029.00 $1,033.00 $1,054.00 $1,065.00

$847.00 $815.00 $820.00 $880.00 $894.00

$911.00 $919.00 $924.00 $942.00 $958.00

$932.00 $940.00 $944.00 $965.00 $977.00

NOTEAvailable with size #41 cylinder only. Cylinder lip sits behind escutcheon.

Consult factory for 70, 71, 72, and 73 functions.Locks supplied standard with 4 spanner head screws on escutcheon only.

Single Cyl

8204 Storeroom or Closet

8205 Office or Entry

8237 Classroom

8206 Storeroom or Service

8231 Utility

8236 Closet

8291 All Purpose Holdback

Single Cyl With Deadbolt

8224 Room Door

8225 Dormitory or Exit

8235 Storeroom

8243 Apartment Corridor


8250 Hotel Guest Lock

Double Cyl No Deadbolt

8216 Apartment or Exit or Public Toilet

8217 Asylum or Institutional

8238 Classroom Security Instruder

8259 School Security

8292 All Purpose Holdback

Double Cyl With Deadbolt

8226 Store Door

8229 Dummy Trim Deadlock

8239, 8240 Classroom Security Instruder

8249 Security Deadbolt

8241 Classroom Security

Non Keyed

8213 Communication or Exit

8215 Passage or Closet

8265 Privacy Bedroom or Bath (Latch)

8266 Privacy Bedroom or Bath (Deadbolt)


ML-168200 FREEWHEELING


Prefix Description Price1- 8200 Line with 1-1/16" wide front for 1-3/8" door Add $52.00

3 Stainless Steel Hubs Add $55.00

10 Signature Key System Add $34.00 /cyl.

10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 /cyl.

11† SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition

21† SARGENT Construction Keying System (Lost Ball) standard on all new systems est. since 5/1/96 Add $10.00 /cyl.

22† SARGENT Construction Keying System (Split Key) to be used on pre-established split keys only Add $10.00 /cyl.

23 Locksets with flat 4-7/8" ANSI strike No addition

31u Doors over 1-3/4" thick Consult Factory

36 6 Lobe security screws Add $19.00

37 Spanner head security screws Add $12.00

60 SARGENT Removable Disposable Construction Core No addition

63 SARGENT Removable Core Cylinder Includes Master & Grand Master Keying Charges Add $44.00 /cyl.

64 SARGENT Removable Construction Core Cylinder See CK-2

74 Lock case wrapped in lead – handing required (roses not available) Add $153.00

Lead Lined (Specify Rose, Escutcheon-for I/S, O/S or both) Add $87.00 ea.

75 Milled inside lever Add $56.00

76 Milled outside lever Add $56.00

77 Milled both levers Add $112.00

F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 /cyl.

82† SARGENT KESO Security Cylinder (For existing systems only) Add $47.00 /cyl.

BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P,

KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.

SG MicroShield™ – an antimicrobial powder coat finish Add $31.00

VA† SARGENT V-10 standard cylinder See V-10 Cylinder Section

VS† SARGENT V-10 Sub-Assembled cylinder See V-10 Cylinder Section

Abrasive coating Add $33.00 per lever

† Not available with 60, 63, 64 prefixesu Consult factory for availability of cylinders for thick doors.

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x FEL x RH x 32D x CPC Add $31.00




ML-178200 FREEWHEELING

8200

Function Finish

FEL

Trim is handed — Please specify hand when ordering.

FE Escutcheon • A-B-E-F-J-L-P-W Levers

4/26D 10/10B 3/9/15/26 10BL/20D

$721.00 $727.00 $740.00 $754.00

$736.00 $740.00 $754.00 $769.00

$752.00 $758.00 $771.00 $785.00

$782.00 $787.00 $802.00 $809.00

$795.00 $802.00 $809.00 $828.00

$686.00 $692.00 $704.00 $719.00

$705.00 $713.00 $727.00 $740.00

Single Cyl



8237 Classroom

8231 Utility

8236 Closet


8224 Room Door


8235 Storeroom





8226 Store Door


Non Keyed





ML-18MORTISE LOCKS

PREFIXES

PrefixNumber Description Price1*s 8200 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.003* Stainless Steel Hubs Add $55.003P Triad™ 3-Point Lock (available with 8224, 8225, 8226, 8227, 8235, 8239, 8266, 8268 function only) Add $191.0010s SARGENT Signature Key System Add $34.00/ cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00/ cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00/cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00/ cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00/ cyl.23 Locksets with flat 4 7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.0036 6 Lobe security head screws Add $19.0037 Spanner head screws Add $12.0049 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims CR, E, L, LN, O, TR

– Available with 26, 29, 38, 39 40, 41 functions – Rose Trim 8200 LN Add $60.0049 Occupancy Indicator with emergency Release

– Available with 65, 66, 68 functions; Rose Trims 7800 CR, E, L, LN, O, TR Add $60.0050* Secured Indicator Rose – for doors 1-5/8" to 2-1/4" thick

– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.0060 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00/ cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00/ cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00/ cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00/ cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.0081s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00/ cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00/ cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00/ cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00/ cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00/cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00LB Extra large thumbturn Add $8.00LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 8205 x TRY x RH x 32D x CPC Add $31.00




ML-19MORTISE LOCKS

COASTAL SERIES DESIGN - 8200

Note: hands required when ordering -G-S-Y Levers

TR Rose - 2" Dia • CR Rose - 2-3/16" Dia • C-G-R-S-Y Levers

TRY shown.

4/26D 10/10B 3/9/15/26 10BL/20D

$704.00 $743.00 $765.00 $769.00

$719.00 $758.00 $778.00 $782.00

$736.00 $773.00 $795.00 $798.00

$758.00 $795.00 $815.00 $821.00

$765.00 $804.00 $826.00 $828.00

$778.00 $815.00 $839.00 $841.00

$889.00 $928.00 $951.00 $954.00

$942.00 $981.00 $1,004.00 $1,007.00

$607.00 $645.00 $668.00 $670.00

$670.00 $705.00 $731.00 $734.00 $692.00 $731.00 $752.00 $754.00 $251.00 $269.00 $280.00 $281.00 $500.00 $539.00 $560.00 $563.00 $308.00 $326.00 $337.00 $339.00 $557.00 $594.00 $619.00 $621.00 $607.00 $645.00 $668.00 $670.00


Function Finish



ML-20MORTISE LOCKS

PREFIXES


- Cylinders - IMPORTANT- See catalog 7800/8200 prefix page for cylinder limitations- Below charges DO NOT include additional charges for special cylinder requirementsDoors up to 2-1/2" thick - lock centered No addition Doors 2-5/8" to 6" thick OR doors 1-3/4" thick w/max 1" paneling one side.For Example: Specify as 1-3/4" door with panel (Side) on inside or outside. Non Keyed function Add $44.00

Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LB Extra large thumbturn Add $8.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section


SuffixCPC Clear Powder Coat over 26D/32D – 8205 x TEG x RH x 32D x CPC Add $31.00




ML-21MORTISE LOCKS

COASTAL SERIES DESIGN - 8200

TE Escutcheon • CE Escutcheon • C-G-R-S-Y Levers

TEG Shown.Note: hands required when ordering -G-S-Y Levers

4/26D 10/10B 3/9/15/26 10BL/20D

$765.00 $804.00 $826.00 $828.00

$778.00 $815.00 $839.00 $841.00

$795.00 $833.00 $815.00 $817.00

$815.00 $857.00 $877.00 $880.00

$826.00 $864.00 $885.00 $889.00

$839.00 $877.00 $899.00 $901.00

$951.00 $989.00 $1,011.00 $1,013.00

$1,004.00 $1,042.00 $1,064.00 $1,066.00

$668.00 $704.00 $727.00 $731.00

$731.00 $769.00 $790.00 $792.00 $752.00 $790.00 $811.00 $809.00 $280.00 $300.00 $311.00 $313.00 $560.00 $600.00 $621.00 $623.00 $337.00 $356.00 $367.00 $368.00 $619.00 $655.00 $677.00 $679.00 $668.00 $704.00 $727.00 $731.00


Function Finish



ML-22MORTISE LOCKS

PREFIXES



Keyed function Add $87.00 49 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims CR, E, L, LN, O, TR



– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-273s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK 8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00

Lead Lined Rose (Specify Rose, Escutcheon-for I/S, O/S or both) Add $87.00 ea.81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

s Prefixes not available with a standard 50 function lockout cylinder.* Not available with 3P- prefix† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x CRMM x RH x 32D x CPC Add $31.00




ML-23MORTISE LOCKS

8200 STUDIO COLLECTION - METRO ELEMENTS

Single Cyl 4/26D 10/10B 3/9/14/15/26 10BL/20D/32D 328204 Storeroom or Closet8205 Office or Entry $704.00 $743.00 $765.00 $769.00 $780.00 8237 Classroom8255 Office or Entry8206 Storeroom or Service8231 Utility8236 Closet8256 Office or Inner Entry $719.00 $758.00 $778.00 $782.00 $794.00 8267 Institutional Privacy8289 Holdback8291 All Purpose Holdback

Single Cyl With Deadbolt8224 Room Door8225 Dormitory or Exit8227 Closet or Storeroom8228, 8230 Dummy Trim Deadlock8235 Storeroom $736.00 $773.00 $795.00 $798.00 $811.00 8243 Apartment Corridor8245 Dormitory or Exit8247 Front Door or Apartment Corridor8251 Storeroom Deadbolt8250 Hotel Guest Lock $758.00 $795.00 $815.00 $821.00 $832.00

Double Cyl No Deadbolt8216 Apartment or Exit or Public Toilet8217 Asylum or Institutional8238 Classroom Security Instruder $765.00 $804.00 $826.00 $828.00 $841.00 8259 School Security8290 Classroom Security Holdback8292 All Purpose Holdback

Double Cyl With Deadbolt8226 Store Door8229 Dummy Trim Deadlock8239, 8240 Classroom Security Instruder8241 Classroom Security $778.00 $815.00 $839.00 $841.00 $853.00 8246 Dormitory or Exit8248 Store Door8249 Security8252 Institutional

Electro Mechanical Single Cyl – Specify 12V or 24V8270-12V / 8270-24V Fail Safe $889.00 $928.00 $951.00 $954.00 $965.00 8271-12V / 8271-24V Fail Secure

Electro Mechanical Double Cyl – Specify 12V or 24V8272-12V / 8272-24V Fail Safe $942.00 $981.00 $1,004.00 $1,007.00 $1,018.00 8273-12V / 8273-24V Fail Secure

Non Keyed8213 Communication or Exit $607.00 $645.00 $668.00 $670.00 $683.00 8215 Passage or Closet8265 Privacy Bedroom or Bath (Latch) $670.00 $705.00 $731.00 $734.00 $746.00 8266, 8268 Privacy Bedroom or Bath (Deadbolt) $692.00 $731.00 $752.00 $754.00 $768.00 8293* Single Dummy Trim $251.00 $269.00 $280.00 $281.00 $288.00 8294 Double Dummy Trim $500.00 $539.00 $560.00 $563.00 $574.00 8295 Single Dummy Trim w/Lockbody $308.00 $326.00 $337.00 $339.00 $346.00 8296 Double Dummy Trim w/Lockbody $557.00 $594.00 $619.00 $621.00 $634.00 8297 Double Dummy w/Active Trim $607.00 $645.00 $668.00 $670.00 $683.00

Function Finish

Rose Design: Lever Series Designs: How to order: 21-8205 x CRMM x RH x 26DCO (2-3/4") Centro Notting Hill Aventura Rialto Odeon Prefix 21CR (2-3/16") MC *MQ MA MO *MN Function 8205LN (2") MD MR MB *ML *MH Rose CRO (2-3/4") MJ *MT ME *MK Lever MMTO (2-3/4") MP *MM MF *MS Hand RHTR (2-3/16") MG *MU Finish 26D

MI *MV* Handed: specify hand when ordering MW



ML-24MORTISE LOCKS

PREFIXES



Keyed function Add $87.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68* 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69* 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK 8 for available keyways) Add $40.00 / cyl74* Lock case wrapped in lead – handing required (roses not available) Add $153.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish), (Not available with 8270, 8271, 8272, 8273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX* Deadbolt Monitoring (not available with 50, 74) Add $160.00 LX Latchbolt Monitor – available with all non-deadbolt functions; not available with DX prefix Add $160.00 RX* Request to Enter/Exit (04, 70, 71, 72, 73 Functions Only) (not available w/1, 50, 74) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

s Prefixes not available with a standard 50 function lockout cylinder.* Not available with 3P- prefix† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 8205 x CRMM x RH x 32D x CPC Add $31.00




ML-25MORTISE LOCKS

8200 STUDIO COLLECTION - METRO ELEMENTS


Single Cyl 4/26D 10/10B 3/9/14/15/26 10BL/20D/32D 328204 Storeroom or Closet8205 Office or Entry $765.00 $804.00 $826.00 $828.00 $841.00 8237 Classroom8255 Office or Entry8206 Storeroom or Service8231 Utility8236 Closet8256 Office or Inner Entry $778.00 $815.00 $839.00 $841.00 $811.00 8267 Institutional Privacy8289 Holdback8291 All Purpose Holdback

Single Cyl With Deadbolt8224 Room Door8225 Dormitory or Exit8227 Closet or Storeroom8228, 8230 Dummy Trim Deadlock8235 Storeroom $795.00 $833.00 $815.00 $817.00 $870.00 8243 Apartment Corridor8245 Dormitory or Exit8247 Front Door or Apartment Corridor8251 Storeroom Deadbolt8250 Hotel Guest Lock $815.00 $857.00 $877.00 $880.00 $892.00

Double Cyl No Deadbolt8216 Apartment or Exit or Public Toilet8217 Asylum or Institutional8238 Classroom Security Instruder $826.00 $864.00 $885.00 $889.00 $901.00 8259 School Security8290 Classroom Security Holdback8292 All Purpose Holdback

Double Cyl With Deadbolt8226 Store Door8229 Dummy Trim Deadlock8239, 8240 Classroom Security Instruder8241 Classroom Security $839.00 $877.00 $899.00 $901.00 $914.00 8246 Dormitory or Exit8248 Store Door8249 Security8252 Institutional

Electro Mechanical Single Cyl – Specify 12V or 24V8270-12V / 8270-24V Fail Safe $951.00 $989.00 $1,011.00 $1,013.00 $1,026.00 8271-12V / 8271-24V Fail Secure

Electro Mechanical Double Cyl – Specify 12V or 24V8272-12V / 8272-24V Fail Safe $1,004.00 $1,042.00 $1,064.00 $1,066.00 $1,080.00 8273-12V / 8273-24V Fail Secure

Non Keyed8213 Communication or Exit $668.00 $704.00 $727.00 $731.00 $743.00 8215 Passage or Closet8265 Privacy Bedroom or Bath (Latch) $731.00 $769.00 $790.00 $792.00 $806.00 8266, 8268 Privacy Bedroom or Bath (Deadbolt) $752.00 $790.00 $811.00 $809.00 $826.00 8293* Single Dummy Trim $280.00 $300.00 $311.00 $313.00 $317.00 8294 Double Dummy Trim $560.00 $600.00 $621.00 $623.00 $636.00 8295 Single Dummy Trim w/Lockbody $337.00 $356.00 $367.00 $368.00 $374.00 8296 Double Dummy Trim w/Lockbody $619.00 $655.00 $677.00 $679.00 $693.00 8297 Double Dummy w/Active Trim $668.00 $704.00 $727.00 $731.00 $743.00

Function Finish

Escutcheon Design: Lever Series Designs: How to order: 21-8205 x CEMM x RH x 26DCE Centro Notting Hill Aventura Rialto Odeon Prefix 21TE MC *MQ MA MO *MN Function 8205LE1 MD MR MB *ML *MH Escutcheon CR

MJ *MT ME *MK Lever MMMP *MM MF *MS Hand RH

MG *MU Finish 26DMI *MV

* Handed: specify hand when ordering MW


ML-26MORTISE LOCKS


PrefixNumber Description Price1s 7800 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E

- Cylinders - IMPORTANT- See catalog 7800/8200 prefix page for cylinder limitations- Below charges DO NOT include additional charges for special cylinder requirementsDoors up to 2-1/2" thick - lock centered No addition Doors 2-5/8" to 6" thick OR doors 1-3/4" thick w/max 1" paneling one side. For example:Specify 1-3/4" door with panel (Side) on inside or outside Non Keyed function Add $44.00

Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 49 Visual Status Indicator – Available with 30, 36, 37 function – Rose Trims 7800 CR, E, L, LN, O, TR



– Available with 24, 25, 26, 28, 29, 30, 36, 37 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions Add $40.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX Deadbolt Monitoring (not available with 50, 74) Add $160.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs† SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section

NOTESAbrasive Coating Add $33.00 per knob.

s Prefixes not available with standard 50 function lockout cylinder.† Not available with 60, 63, 64 prefixes.

SuffixCPC Clear Powder Coat over 26D/32D – 7805 x OB x 32D x CPC Add $31.00



ML-27MORTISE LOCKS


OBO-E-L- Rose • B-C Knob

4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

$630.00 $638.00 $651.00

$645.00 $651.00 $665.00

$662.00 $668.00 $683.00

$687.00 $693.00 $706.00

$695.00 $702.00 $716.00

$710.00 $716.00 $732.00

$524.00 $530.00 $544.00

$592.00 $596.00 $610.00 $615.00 $621.00 $638.00 $204.00 $206.00 $214.00 $407.00 $412.00 $428.00 $264.00 $269.00 $277.00 $470.00 $476.00 $490.00 $524.00 $530.00 $544.00

Function Finish Single Cyl7804 Storeroom or Closet7805 Office or Entry7837 Classroom7855 Office or Entry7806 Storeroom or Service7831 Utility7836 Closet7856 Office or Inner Entry7867 Institutional PrivacySingle Cyl With Deadbolt7824 Room Door7825 Dormitory or Exit7827 Closet or Storeroom7828, 7830 Dummy Trim Deadlock7835 Storeroom7843 Apartment Corridor7845 Dormitory or Exit7847 Front Door or Apartment Corridor7851 Storeroom Deadbolt7850 Hotel Guest LockDouble Cyl No Deadbolt7816 Apartment or Exit or Public Toilet7817 Asylum or Institutional7838 Classroom Security InstruderDouble Cyl With Deadbolt7826 Store Door7829 Dummy Trim Deadlock7839, 7840 Classroom Security Instruder7841 Classroom Security7846 Dormitory or Exit7848 Store Door7852 InstitutionalNon Keyed7813 Communication or Exit7815 Passage or Closet7865 Privacy Bedroom or Bath (Latch)7866, 7868 Privacy Bedroom or Bath (Deadbolt)7893 Single Dummy Trim7894 Double Dummy Trim7895 Single Dummy Trim w/Lockbody7896 Double Dummy Trim w/Lockbody7897 Double Dummy w/Active Trim


ML-28MORTISE LOCKS


PrefixNumber Description Price1s 7800 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 /cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No additionF182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX Deadbolt Monitoring (not available with 50, 74) Add $160.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs† SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section

Escutcheon VariationsStandard Cylinder KE2 x concealed mounting $16.00 Non-Keyed Function KE2 x concealed mounting $16.00 Cylinder Barrel Only KE3 x exposed screws (not avail. in double cyl. functions) $50.00 SetNon-Keyed Function KE3 x exposed screws $16.00 Cylinder Barrel Only KE4 x concealed mounting (not avail. in double cyl. functions $50.00 Non-Keyed Function KE4 x concealed mounting $16.00

NOTESAbrasive Coating Add $33.00 per Knob.s Prefixes not available with standard 50 function lockout cylinder.† Not available with 60, 63, 64 prefixes.

SuffixCPC Clear Powder Coat over 26D/32D – 7805 x KW1B x RH x 32D x CPC Add $31.00



ML-29MORTISE LOCKS


Minimum Order $250

4,10,26D 3,9,10B 10BL,20D 4,10,26D 3,9,10B 10BL,20D15,26 32,32D 15,26 32,32D

$693.00 $698.00 $712.00 $758.00 $763.00 $779.00

$706.00 $712.00 $730.00 $774.00 $779.00 $792.00

$727.00 $732.00 $747.00 $790.00 $796.00 $811.00

$749.00 $754.00 $771.00 $813.00 $822.00 $835.00

$758.00 $763.00 $779.00 $824.00 $831.00 $844.00

$774.00 $779.00 $792.00 $838.00 $844.00 $860.00

$586.00 $592.00 $606.00 $651.00 $657.00 $672.00

$654.00 $659.00 $676.00 $719.00 $727.00 $739.00 $679.00 $683.00 $698.00 $743.00 $749.00 $763.00 $234.00 $238.00 $245.00 $268.00 $270.00 $278.00 $470.00 $476.00 $490.00 $535.00 $541.00 $556.00 $298.00 $301.00 $307.00 $331.00 $334.00 $341.00 $532.00 $537.00 $553.00 $596.00 $604.00 $618.00 $586.00 $592.00 $606.00 $651.00 $657.00 $672.00

Single Cyl7804 Storeroom or Closet7805 Office or Entry7837 Classroom7855 Office or Entry7806 Storeroom or Service7831 Utility7836 Closet7856 Office or Inner Entry7867 Institutional PrivacySingle Cyl With Deadbolt7824 Room Door7825 Dormitory or Exit7827 Closet or Storeroom7828, 7830 Dummy Trim Deadlock7835 Storeroom7843 Apartment Corridor7845 Dormitory or Exit7847 Front Door or Apartment Corridor7851 Storeroom Deadbolt7850 Hotel Guest LockDouble Cyl No Deadbolt7816 Apartment or Exit or Public Toilet7817 Asylum or Institutional7838 Classroom Security InstruderDouble Cyl With Deadbolt7826 Store Door7829 Dummy Trim Deadlock7839, 7840 Classroom Security Instruder7841 Classroom Security7846 Dormitory or Exit7848 Store Door7852 InstitutionalNon Keyed7813 Communication or Exit7815 Passage or Closet7865 Privacy Bedroom or Bath (Latch)7866, 7868 Privacy Bedroom or Bath (Deadbolt)7893 Single Dummy Trim7894 Double Dummy Trim7895 Single Dummy Trim w/Lockbody7896 Double Dummy Trim w/Lockbody7897 Double Dummy w/Active Trim

KW1B

KW1 Escutcheon B-C Knob

KE1 Escutcheon B-C Knob Prices shown

KE2, KE3, KE4Escutcheons – refer to ML-28 for add

KE1B

Finish Finish

NOT AVAILABLE IN KE3 & KE4

NOT AVAILABLE IN KE3 & KE4

Refer to ML-28 for KE2, KE3, KE4 escutcheon variation add.



ML-30MORTISE LOCKS

PREFIXES

PrefixNumber Description Price1s 7800 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11† s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX Deadbolt Monitoring (not available with 50, 74) Add $160.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs † SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 7805 x WTB x RH x 32D x CPC Add 30.00




ML-31MORTISE LOCKS

7800


4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

$654.00 $659.00 $676.00

$668.00 $676.00 $691.00

$687.00 $693.00 $706.00

$710.00 $716.00 $732.00

$719.00 $727.00 $739.00

$735.00 $739.00 $754.00

$548.00 $553.00 $567.00

$615.00 $621.00 $638.00 $640.00 $645.00 $659.00 $215.00 $218.00 $227.00 $433.00 $437.00 $451.00 $278.00 $281.00 $289.00 $493.00 $499.00 $514.00 $548.00 $553.00 $567.00

Function Finish

WTBWT Escutcheon • B-C Knob


ML-32MORTISE LOCKS


PrefixNumber Description Price1s 7800 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11† s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.68 8200 Line furnished with lever handle outside x knob inside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 69 8200 Line furnished with lever handle inside x knob outside (Excludes SLD Detention Knob) Defaults to 8200 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 0/ cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX Deadbolt Monitoring (not available with 50, 74) Add $160.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SEs † Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs † SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 7805 x WTN x RH x 32D x CPC Add $31.00



ML-33MORTISE LOCKS

7800 April 15, 2008 | Minimum Order $250


4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

$661.00 $667.00 $683.00

$677.00 $683.00 $698.00

$695.00 $701.00 $714.00

$717.00 $724.00 $739.00

$729.00 $734.00 $748.00

$742.00 $748.00 $761.00

$555.00 $560.00 $574.00

$622.00 $629.00 $644.00 $646.00 $654.00 $667.00 $219.00 $222.00 $231.00 $439.00 $444.00 $460.00 $287.00 $290.00 $297.00 $500.00 $509.00 $522.00 $555.00 $560.00 $574.00

Function Finish

WTNWT Escutcheon • N Knob (1673)Knob substitute to match old MRL design.


ML-34MORTISE LOCKS

PREFIXES

Prefix Number Description Price10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinder only) Add $48.00 / cyl.11s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 21s SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22s SARGENT Construction Key System (split key) Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws $12.00 74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 F182s SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.82s SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SCs Schlage C Keyway Cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs Schlage E Keyway Cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00

NOTESAbrasive Coating Add $33.00 per Knob.

s Prefixes not available with standard 50 function lockout cylinder.

SuffixCPC Clear Powder Coat over 26D/32D – 7805 x KSK x RH x 32D x CPC Add $31.00



4, 10, 26D 3, 9, 10B, 15, 26 32, 32D

$1,104.00 $1,116.00 $1,126.00

$1,122.00 $1,128.00 $1,141.00

$1,139.00 $1,147.00 $1,156.00

$1,163.00 $1,172.00 $1,182.00

$1,172.00 $1,179.00 $1,192.00

$1,187.00 $1,195.00 $1,207.00

$997.00 $1,008.00 $1,020.00

$1,067.00 $1,077.00 $1,088.00

$1,091.00 $1,099.00 $1,111.00

Function Finish

KSKKS EscutcheonK Knob (1485)

Single Cyl



7837 Classroom


7806 Storeroom or Service

7831 Utility

7836 Closet


7824 Room Door


7835 Storeroom









7826 Store Door



Non Keyed

7813 Communication or Exit




NOTESAvailable with size #41 cylinder only. Cylinder lip sits behind escutcheon.


ML-35MORTISE LOCKS



ML-36MORTISE LOCKS


PrefixNumber Description Price10 SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 36 6 Lobe security head screws $19.00 37 Spanner head screws Add $12.00 screw60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No additionF182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs† SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section



ML-37MORTISE LOCKS

7800 PUSH/PULLApril 15, 2008 | Minimum Order $250

4, 10, 32D 3, 9, 10B, 32 10BL, 20D

$768.00 $794.00 $803.00

$796.00 $824.00 $831.00

$816.00 $842.00 $852.00

$827.00 $853.00 $861.00

$838.00 $864.00 $874.00

$673.00 $698.00 $708.00

$734.00 $760.00 $769.00

Function Finish

7837 PT

Single Cyl


7837 Classroom


7824 Room Door








7826 Store Door

Non Keyed



LOCKBODIES ONLY - For “PT” trim. For all other trimset lockbodies, refer to ML-45.

Part # Function Price

78-2814* 04 Storeroom - Single Cylinder$250.00

78-2820* 37 Classroom - Single Cylinder

78-2818* 24 Storeroom - Single Cylinder w/deadbolt

78-2821* 43 Dwelling Entry - Single Cylinder w/deadbolt $276.00

78-2822* 45 Dwelling Entry - Single Cylinder w/deadbolt

78-2823* 50 Hotel - Single Cylinder w/Deadbolt $276.00

78-2816* 16 Public Entry - Double Cylinder$250.00

78-2817* 17 Asylum - Double Cylinder

78-2819* 26 Storeroom - Double Cylinder w/Deadbolt $276.00

78-2815* 15 Passage - Non-Keyed $163.00

78-2824* 65 Privacy - Non-Keyed $218.00

* Note: Outside Fronts, Strikes, Cylinders and Trim are NOT included with lockbody. Please order separately.

Note: All locks supplied standard with 4 each 6-lobe security head screws on escutcheons only.


ML-38MORTISE LOCKS

PREFIXES April 15, 2008 | Minimum Order $250

PrefixNumber Description Price1s 7800 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Locksets with flat 4-7/8" ANSI strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-8 for available keyways) Add $31.00 / cyl.70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl737Ps† Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl74 Lock case wrapped in lead – handing required (roses not available) Add $153.00 75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 81s† Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.82† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AV Anti Vandal Pull Trim (available in 32D finish) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DX Deadbolt Monitoring (not available with 50, 74) Add $160.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0-bitted) No addition SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVCs† SARGENT V-10 Interchangeable Core See V-10 Cylinder SectionVSs† SARGENT V-10 Standard Cylinder Sub-assembled See V-10 Cylinder SectionVCVSs† SARGENT V-10 Standard Cylinder Interchangeable Core Sub-assembled See V-10 Cylinder Section



SuffixCPC Clear Powder Coat over 26D/32D – 7805 x SLD x RH x 32D x CPC Add $31.00



ML-39MORTISE LOCKS


SLDSL- Rose • D KnobNOTE: Not ADA Compliant.

4, 26D 32D

$1,299.00 $1,304.00

$1,312.00 $1,319.00

$1,329.00 $1,337.00

$1,354.00 $1,358.00

$1,360.00 $1,368.00

$1,375.00 $1,382.00

$1,195.00 $1,199.00

$1,262.00 $1,268.00 $1,283.00 $1,289.00

$541.00 $544.00 $1,083.00 $1,088.00

$603.00 $605.00 $1,142.00 $1,149.00 $1,195.00 $1,199.00

Function Finish Single Cyl7804 Storeroom or Closet7805 Office or Entry7837 Classroom7855 Office or Entry7806 Storeroom or Service7831 Utility7836 Closet7856 Office or Inner Entry7867 Institutional PrivacySingle Cyl With Deadbolt7824 Room Door7825 Dormitory or Exit7827 Closet or Storeroom7828, 7830 Dummy Trim Deadlock7835 Storeroom7843 Apartment Corridor7845 Dormitory or Exit7847 Front Door or Apartment Corridor7851 Storeroom Deadbolt7850 Hotel Guest LockDouble Cyl No Deadbolt7816 Apartment or Exit or Public Toilet7817 Asylum or Institutional7838 Classroom Security InstruderDouble Cyl With Deadbolt7826 Store Door7829 Dummy Trim Deadlock7839, 7840 Classroom Security Instruder7841 Classroom Security7846 Dormitory or Exit7848 Store Door7852 InstitutionalNon Keyed7813 Communication or Exit7815 Passage or Closet7865 Privacy Bedroom or Bath (Latch)7866, 7868 Privacy Bedroom or Bath (Deadbolt)7893 Single Dummy Trim7894 Double Dummy Trim7895 Single Dummy Trim w/Lockbody7896 Double Dummy Trim w/Lockbody7897 Double Dummy w/Active Trim



ML-40MORTISE LOCKS

8200 DEADLOCKS

Function Finish

8200Mortise Deadlock

Single Cylinder Deadbolt 4, 26D 3, 9,10, 10B, 10BL, 15, 20D 26, 32, 32D

8203 Cylinder x thumbturn $291.00 $304.00

8220 F18 Cylinder $253.00 $265.00

8221 F17 Cylinder x thumbturn $291.00 $304.00

Double Cylinder Deadbolt

8222 F16 Cylinder $307.00 $319.00

8223 Cylinder x thumbturn $346.00 $357.00

Double Cylinder All-Purpose Lock Finish

with 126 T-Turn Inside 4, 10, 26D 3, 9, 10B, 10BL, 20D, 26, 32, 32D

*7892 x SSTT $530.00 $535.00

Prefixes Available:

1, 10, 11, 21, 22, 23, 31, 36, 37, 51, 52, 60, 63, 64, 65-73, 65-73-7P,

70, 72, 73, 73-7P, 74, 81, F182, F183, 82, 83, 84, SC, SE, VA, VC, VS, VCVS

Please note: not all prefixes are compatible. refer to 7800/8200 catalog prefix page.

*Please note: 126 T-Turn (SSTT) is only available for use with 7892 function.



ML-41MORTISE LOCKS

DISTRIBUTOR BULK PACK PROGRAM

*Note: “A” lever design and all escutcheon designs are handed. Please specify hand when ordering.

Features of the SARGENT Distributor Bulk Pack Program

• Allows the distributor to virtually “build your own” SARGENT mortise locks by stocking bulk packed lock bodies, complete trim sets and cylinders separately for maximum utilization of warehouse space and inventory dollars

• The 3 components fit snugly in specially designed packaging for ease in picking and maximum protection• List price of the components equals that of a complete mortise lock. Standard Buying Program discounts applyFeatures of the SARGENT Distributor Bulk Pack Program

Using the SARGENT Distributor Bulk Pack Program

• Lockbodies must be ordered in multiples of 10 per function/finish. Prefix BP- to lock function in order to receive bulk packaging and bulk pack program pricing. Strike and o/s front are included, please specify finish. The lock bodies are individually packaged in with strike and o/s front in protective sleeves. Packed 10 per carton.

• Complete trim sets must be ordered in multiples of 10 per design/finish. These are individually packaged in full mortise lock boxes and are packed 10 per carton.

• Order cylinders as a separate line item if required.

Product functions available

Function Description ANSI7804/8204 Storeroom F077805/8205 Office F047837/8237 Classroom F057824/8224 Storeroom F217825/8225 Dormitory F137843/8243 Dwelling Entry F207845/8245 Dwelling Entry F127815/8215 Passage F017865/8265 Privacy F22

Designs and Finishes Available

ALL current 7800/8200 trim designs and finishes will be offered within the SARGENTDistributor Bulk Pack.

How to Order/Notes: Example: BP-8225 x US3

1) Distributor Bulk Pack lockbodies must be ordered with BP prefix.2) Distributor Bulk Pack lockbodies must be ordered in multiples of

10 per each lock function.(Quantity of 1 = 1 lockbody; Packed 10 to a box)

3) Orders received for less than case quantities will be priced at non-bulk pack prices.

4) Distributor Bulk Pack lockbodies DO NOT include cylinder and trim sets.

5) Distributor Bulk Pack lockbodies include outside front, strike, and mounting screws.

How to Order/Notes: Example: TR-8225 LE1P x US3 x RH

1) Distributor Bulk Pack trim sets must be ordered: using TR(prefix) x lock function x trim design x finish x hand (A lever andEscutcheon trim are handed. Please specify hand when ordering).

2) Distributor Bulk Pack trim sets must be ordered in multiples of 10 perdesign and finish. (Quantity of 1 - 1 trim set; packed 10 to a box)

3) Orders received for less than case quantities will be priced at non-bulk pack prices.

4) Complete trim sets include spindles, trim pack assemblies, instructionsheets, and templates.

5) Split designs and or finishes are not available.6) Components are for 1-3/4" thick doors only.7) Cylinder and lockbodies must be ordered separately.


ML-42MORTISE LOCKS

DISTRIBUTOR BULK PACK PROGRAMApril 15, 2008 | Minimum Order $250

Lockbody ONLY Example: BP-8225 x US3

8200 Lockbody All FinishesSingle Cylinder Function

BP-8204 Storeroom $238.00 eachBP-8205 Office $238.00 eachBP-8237 Classroom $238.00 eachBP-8255 Office $238.00 each

Single Cylinder Function with Deadbolt

BP-8224 Storeroom $253.00 eachBP-8225 Dormitory $253.00 eachBP-8243 Dwelling Entry $253.00 eachBP-8245 Dwelling Entry $253.00 each

Non-Keyed

BP-8215 Passage $199.00 eachBP-8265 Privacy $225.00 each

7800 Lockbody All FinishesSingle Cylinder Function

BP-7804 Storeroom $234.00 eachBP-7805 Office $234.00 eachBP-7837 Classroom $234.00 each

Single Cylinder Function with Deadbolt

BP-7824 Storeroom $251.00 eachBP-7825 Dormitory $251.00 eachBP-7843 Dwelling Entry $251.00 eachBP-7845 Dwelling Entry $251.00 each

Non-Keyed

BP-7815 Passage $194.00 eachBP-7865 Privacy $222.00 each

NOTE: Quantity 1 each = 1 lockbody; must be ordered in multiples of 10 each per each lock function


ML-43MORTISE LOCKS

DISTRIBUTOR BULK PACK PROGRAMApril 15, 2008 | Minimum Order $250

Quantity 1 each = 1 lockbody set of trim; must be ordered in multiples of 10 each per design and finish.TRIM ONLY. Lockbodies and cylinders NOT included. Example: TR-8225 LE1P x US3 x RH

Lock Function Rose Lever 4,26D 10,10B 3,9,15,26 10BL,20D,32D 32

TR-8204/8205/8237/8255 E, L, LN, O *A, E, F, W $316.00 $320.00 $334.00 $346.00 $359.00E, L, LN, O B, L, P $292.00 $296.00 $311.00 $320.00 $334.00 SetE, L, LN, O J $201.00 $205.00 $220.00 $230.00 $245.00

TR-8224/8225/8243/8245 E, L, LN, O *A, E, F, W $332.00 $337.00 $349.00 $362.00 $373.00E, L, LN, O B, L, P $306.00 $313.00 $327.00 $337.00 $349.00 SetE, L, LN, O J $215.00 $222.00 $235.00 $245.00 $261.00

TR-8215 E, L, LN, O *A, E, F, W $310.00 $316.00 $329.00 $340.00 $353.00E, L, LN, O B, L, P $286.00 $291.00 $304.00 $316.00 $329.00 SetE, L, LN, O J $194.00 $201.00 $215.00 $225.00 $240.00

TR-8265 E, L, LN, O *A, E, F, W $347.00 $352.00 $365.00 $378.00 $392.00E, L, LN, O B, L, P $321.00 $327.00 $342.00 $352.00 $365.00 SetE, L, LN, O J $231.00 $236.00 $251.00 $263.00 $276.00

Lock Function *Escutcheon Lever 4,26D 10,10B 3,9,15,26 10BL,20D,32D 32

TR-8204/8205/8237/8255 *LE1 A thru W $322.00 $330.00 $343.00 $355.00 $370.00TR-8224/8225/8243/8245 *LE1 A thru W $338.00 $343.00 $358.00 $370.00 $385.00 SetTR-8215 *LE1 A thru W $318.00 $323.00 $338.00 $352.00 $364.00TR-8265 *LE1 A thru W $355.00 $361.00 $373.00 $387.00 $400.00

Add to LE1 prices above:Standard Cylinder *LE2 x concealed mounting $16.00Non-Keyed Function *LE2 x concealed mounting $16.00Cylinder Barrel Only *LE3 x exposed screws (not avail. in double cyl. functions) $50.00 SetNon-Keyed Function *LE3 x exposed screws $16.00Cylinder Barrel Only *LE4 x concealed mounting (not avail. in double cyl. functions) $59.00Non-Keyed Function *LE4 x concealed mounting $16.00

Lock Function *Escutcheon Lever 4,26D 10,10B 3,9,15,26 10BL,20D,32D 32

TR-8204/8205/8237/8255 *LW1 A thru W $302.00 $307.00 $321.00 $335.00 $349.00TR-8224/8225/8243/8245 *LW1 A thru W $318.00 $322.00 $337.00 $352.00 $366.00 SetTR-8215 *LW1 A thru W $295.00 $301.00 $314.00 $328.00 $342.00TR-8265 *LW1 A thru W $331.00 $339.00 $352.00 $366.00 $380.00TR-8204/8205/8237/8255 *WT A thru W $288.00 $294.00 $309.00 $320.00 $334.00TR-8224/8225/8243/8245 *WT A thru W $304.00 $311.00 $322.00 $337.00 $349.00 SetTR-8215 *WT A thru W $283.00 $289.00 $302.00 $316.00 $329.00TR-8265 *WT A thru W $319.00 $324.00 $338.00 $352.00 $365.00TR-8204/8205/8237/8255 *LS A thru W $653.00 $665.00 $669.00 $685.00 $701.00TR-8224/8225/8243/8245 *LS A thru W $669.00 $679.00 $684.00 $703.00 $717.00 SetTR-8215 *LS A thru W $648.00 $658.00 $662.00 $681.00 $696.00TR-8265 *LS A thru W $686.00 $695.00 $699.00 $718.00 $733.00

Lock Function *Escutcheon Lever 4, 26D 10, 10B 3, 9, 26 10BL, 20D

TR-8204/8205/8237/8255 *FE A*, B, E, F, J, L, P, W $430.00 $436.00 $449.00 $463.00 TR-8224/8225 *FE A*, B, E, F, J, L, P, W $446.00 $452.00 $465.00 $479.00 SetTR-8265 *FE A*, B, E, F, J, L, P, W $462.00 $467.00 $479.00 $494.00



ML-44MORTISE LOCKS

DISTRIBUTOR BULK PACK PROGRAM8200 COASTAL SERIES TRIM & 7800 SERIESApril 15, 2008 | Minimum Order $250

Quantity 1 each = 1 set of trim; must be ordered in multiples of 10 each per design and finish.TRIM ONLY. Lockbodies and cylinders NOT included.How to Order – Example: TR-8205 CRY x US3 x RH

Lock Function Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D

TR-8204/8205/8237/8255 TR, CR C, G*, R, S*, Y* $413.00 $451.00 $474.00 $477.00TR-8224/8225/8243/8245 TR, CR C, G*, R, S*, Y* $431.00 $467.00 $489.00 $492.00TR-8215 TR, CR C, G*, R, S*, Y* $409.00 $446.00 $469.00 $471.00TR-8265 TR, CR C, G*, R, S*, Y* $445.00 $485.00 $506.00 $510.00Lock Function *Escutcheon Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DTR-8204/8205/8237/8255 TE, CE C, G*, R, S*, Y* $474.00 $513.00 $535.00 $537.00TR-8224/8225/8243/78245 TE, CE C, G*, R, S*, Y* $489.00 $527.00 $551.00 $553.00TR-8215 TE, CE C, G*, R, S*, Y* $469.00 $505.00 $528.00 $532.00TR-8265 TE, CE C, G*, R, S*, Y* $506.00 $544.00 $566.00 $568.00Lock Function Rose Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DTR-7804/7805/7837/7855 O, E, L B, C $343.00 $350.00 $364.00 TR-7824/7825/7843/7845 O, E, L B, C $359.00 $364.00 $380.00 setTR-7815 O, E, L B, C $330.00 $336.00 $349.00 TR-7865 O, E, L B, C $370.00 $374.00 $389.00Lock Function *EscutcheonKnob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

TR-7804/7805/7837/7855 *WT B, C $367.00 $372.00 $389.00 TR-7824/7825/7843/7845 *WT B, C $384.00 $389.00 $402.00 setTR-7815 *WT B, C $354.00 $359.00 $372.00TR-7865 *WT B, C $393.00 $399.00 $416.00Lock Function *EscutcheonKnob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

TR-7804/7805/7837/7855 *KW1 B, C $406.00 $411.00 $425.00TR-7824/7825/7843/7845 *KW1 B, C $423.00 $428.00 $443.00 setTR-7815 *KW1 B, C $391.00 $397.00 $412.00TR-7865 *KW1 B, C $433.00 $438.00 $454.00 Lock Function *EscutcheonKnob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

TR-7804/7805/7837/7855 *KE1 B, C $471.00 $476.00 $492.00TR-7824/7825/7843/7845 *KE1 B, C $487.00 $492.00 $508.00 setTR-7815 *KE1 B, C $457.00 $463.00 $477.00TR-7865 *KE1 B, C $497.00 $505.00 $518.00

Add to KE1 prices above:Standard Cylinder *KE2 x concealed mounting. $16.00Non-Keyed Function *KE2 x concealed mounting $16.00Cylinder Barrel Only *KE3 x exposed screws (not avail. in double cyl. functions) $50.00 setNon-Keyed Function *KE3 x exposed screws $16.00Cylinder Barrel Only *KE4 x concealed mounting (not avail. in double cyl. functions) $59.00 Non-Keyed Function *KE4 x concealed mounting $16.00

Lock Function *EscutcheonKnob 4, 10, 26D 3, 9, 10B, 15, 26 32, 32D

TR-7804/7805/7837/7855 *KS K $817.00 $829.00 $839.00TR-7824/7825/7843/7845 *KS K $835.00 $843.00 $853.00

setTR-7815 *KS K $803.00 $813.00 $826.00TR-7865 *KS K $846.00 $856.00 $866.00

*Note: All escutcheon designs are handed. G, S, Y lever designs are handed. Please specify hand when ordering.

ML-45MORTISE LOCKS

7800/8200 LOCKBODIES



7800/8200 Lock Bodies Only

Function All Finishes Single Cyl Function Description Lockbody # 7800 820004 Storeroom or Closet 37 $315.00 $322.00 05 Office or Entry 37 $315.00 $322.00 37 Classroom 37 $315.00 $322.00 06 Storeroom or Service 37 $315.00 $322.00 31 Utility 37 $315.00 $322.00 36 Closet 37 $315.00 $322.00 55 Office or Entry 55 $315.00 $322.00 56 Office or Inner Entry 56 $329.00 $335.00 67 Institutional Privacy 67 $329.00 $335.00 89 Holdback 89 N/A $335.00 91(8291) All Purpose Holdback 91 N/A $335.00 Single Cyl With Deadbolt24 Room Door 26 $344.00 $349.00 25 Dormitory or Exit 25 $344.00 $349.00 27 Closet or Storeroom 26 $344.00 $349.00 28, 30 Dummy Trim Deadlock 28 $344.00 $349.00 35 Storeroom 25 $344.00 $349.00 43 Apartment Corridor 43 $344.00 $349.00 45 Dormitory or Exit 45 $344.00 $349.00 47 Front Door or Apartment Corridor 47 $344.00 $349.00 51 Storeroom Deadbolt 50 $344.00 $349.00 50 Hotel Guest Lock 50 $344.00 $349.00 Double Cyl No Deadbolt16 Apartment or Exit or Public Toilet 16 $315.00 $322.00 17 Asylum or Institutional 37 $315.00 $322.00 38 Classroom Security Intruder 37 $315.00 $322.00 59 School Security 37 $315.00 $322.00 90 Classroom Security Holdback 89 N/A $322.00 92 All Purpose Holdback 92 $315.00 $322.00 Double Cyl With Deadbolt26 Store Door 26 $344.00 $349.00 29 Dummy Trim Deadlock 28 $344.00 $349.00 39 Classroom Security Intruder 25 $344.00 $349.00 40 Classroom Security Intruder 40 $344.00 $349.00 41 Classroom Security 41 $344.00 $349.00 46 Dormitory or Exit 45 $344.00 $349.00 48 Store Door 47 $344.00 $349.00 49 Security 47 $344.00 $349.00 52 Institutional 50 $344.00 $349.00 Electro Mechanical Single Cyl – Specify 12V or 24V70-12V / 70-24V Fail Safe 70 NA $532.00 71-12V / 71-24V Fail Secure 71 NA $532.00 Electro Mechanical Double Cyl – Specify 12V or 24V72-12V / 72-24V Fail Safe 72 NA $532.00 73-12V / 72-24V Fail Secure 73 NA $532.00 Non Keyed13 Communication or Exit 37 $315.00 $322.00 15 Passage or Closet 15 $225.00 $233.00 65 Privacy Bedroom or Bath (Latch) 65 $282.00 $290.00 66 Privacy Bedroom or Bath (Deadbolt) 25 $344.00 $349.00 68 Privacy Bedroom or Bath (Deadbolt) 26 $344.00 $349.00 95 Single Dummy Trim w/Lockbody 95 $225.00 $233.00 96 Double Dummy Trim w/Lockbody 95 $225.00 $233.00 97 Double Dummy w/Active Trim 95 $225.00 $233.00

NOTE: Cylinder and trim not included. Outside front, strike and screwpack are included.For “PT” Trim (Push/Pull) Lockbodies, refer to ML-37.Lockbodies with prefixes 1, 3, 3P, 68, 69, DX, LX, RX, or any combination, please consult the factory for correct part number and price.


ML-46MORTISE LOCKS

8200 TRIM SET PROGRAMApril 15, 2008 | Minimum Order $250

Features of the NEW Sargent Mortise Trim Set Program

• Mortise Trim Set program allows a distributor to purchase a complete inside set of trim or a complete outside set of trim for Sargent’s 7800 and 8200 mortise locks.

• No extra parts are required to complete the trim sets.

• All current 7800/8200 trim designs and finishes are available within the NEW Trim Set program.

How to use and order the NEW Trim Set program:

You will need to know function, trim design, finish, and hand (if required) that your trim will be used with• For a complete inside trim set for Sargent's 8200/7800 mortise lock, use prefix IS.

Example: IS-8205 LNA x US3 x RH

• For a complete outside trim set for Sargent's 8200/7800 mortise lock, use prefix OS.Example: OS-8205 LNA x US3 x RH

• For a complete inside and outside set of trim, you will need to order 1 IS and 1 OS trim pack.Example: 1 ea IS-8205 LNA x US3 x RH

1 ea OS-8205 LNA x US3 x RH

Note: Cylinders are NOT included within the trim sets. Cylinders must be ordered separately.

3 Easy steps in putting together a complete 8265 LNL x 26D lockset

EXAMPLE:

1. Lockbody 1 ea 8265 x 26D refer to ML-45 includes o/s front and strike

2. I/S Trim 1 ea IS-8265 x LNL x 26D refer to ML-47 includes inside L lever assy., LN rose, 130KBturn lever assy, trim pack.

3. O/S Trim 1 ea OS-8265 x LNL x 26D refer to ML-50 includes outside L lever assy., LN rose, 184Wemergency release assy.


ML-47MORTISE LOCKS

8200 INSIDE TRIM SETRApril 15, 2008 | Minimum Order $250

Lock Function Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291 E, L, LN, O A*, E, F, W $183.00 $186.00 $191.00 $198.00 $205.00IS-8205 IS-8237 IS-8270 IS-8295 B, L, P $174.00 $179.00 $184.00 $189.00 $197.00 IS-8206 IS-8255 IS-8271 IS-8296 J $148.00 $150.00 $157.00 $164.00 $170.00 IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273 E, L, LN, O A*, E, F, W $188.00 $190.00 $198.00 $203.00 $213.00 IS-8217 IS-8239 IS-8248 IS-8290 B, L, P $181.00 $183.00 $189.00 $196.00 $202.00 IS-8226 IS-8240 IS-8252 IS-8292 J $152.00 $155.00 $164.00 $168.00 $174.00 IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268 E, L, LN, O A*, E, F, W $205.00 $207.00 $216.00 $220.00 $226.00 IS-8225 IS-8243 IS-8251 B, L, P $197.00 $200.00 $206.00 $214.00 $219.00 IS-8227 IS-8245 IS-8265 J $170.00 $172.00 $180.00 $184.00 $190.00 IS-8228 IS-8247 IS-8266

Lock Function Coastal Trim Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DIS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295

TR, CR C, G*, R, S*, Y* $214.00 $231.00 $240.00 $242.00 IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 TR, CR C, G*, R, S*, Y* $218.00 $236.00 $249.00 $250.00 IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 TR, CR C, G*, R, S*, Y* $233.00 $254.00 $264.00 $265.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266

Lock Function Metro Elements Trim Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295 O, CO, CR,

MA thru MW $214.00 $231.00 $240.00 $242.00 $243.00IS-8206 IS-8255 IS-8271 IS-8296 LN, TO, TRIS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 O, CO, CR,

MA thru MW $218.00 $236.00 $249.00 $250.00 $255.00IS-8226 IS-8240 IS-8252 IS-8292 LN, TO, TRIS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 O, CO, CR,

MA thru MW $233.00 $254.00 $264.00 $265.00 $271.00 IS-8227 IS-8245 IS-8265 LN, TO, TRIS-8228 IS-8247 IS-8266Lock Function Coastal Trim *Esc Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DIS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295 TE, CE C, G*, R, S*, Y* $307.00 $324.00 $336.00 $337.00 IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 TE, CE C, G*, R, S*, Y* $313.00 $330.00 $343.00 $344.00 IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 TE, CE C, G*, R, S*, Y* $327.00 $348.00 $357.00 $360.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266

Example: IS-8225 LE1P x US3 x RHInside trim sets include: Inside lever, inside rose or escutcheon, trim pack (spindles, thrubolt screws, set screw, insideadaptor plate assembly),trim finish screws (for escutcheons). CYLINDERS NOT INCLUDED – Order separately.*Note: “A” lever design and all escutcheon designs are handed. Please specify hand when ordering.


ML-48MORTISE LOCKS

8200 INSIDE TRIM SETApril 15, 2008 | Minimum Order $250

Lock Function Metro Elements Trim Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295

CE, TE, LE1 MA thru MW $307.00 $324.00 $336.00 $337.00 $343.00IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290

CE, TE, LE1 MA thru MW $313.00 $330.00 $343.00 $344.00 $350.00IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251

CE, TE, LE1 MA thru MW $327.00 $348.00 $357.00 $360.00 $366.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295 *LW1 *A, B, E, F, J, L, P, W $234.00 $237.00 $245.00 $253.00 $258.00 IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 *LW1 *A, B, E, F, J, L, P, W $239.00 $242.00 $251.00 $257.00 $264.00IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 *LW1 *A, B, E, F, J, L, P, W $257.00 $260.00 $267.00 $272.00 $280.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266


ML-49MORTISE LOCKS


Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295 *LE1 *A, B, E, F, J, L, P, W $250.00 $253.00 $258.00 $265.00 $271.00 IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 *LE1 *A, B, E, F, J, L, P, W $255.00 $257.00 $264.00 $270.00 $277.00 IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 *LE1 *A, B, E, F, J, L, P, W $270.00 $272.00 $280.00 $287.00 $293.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266

Lock Function *Esc. Lever Add to LE1 prices above:Standard Cylinder x concealed mounting *LE2 *A, B, E, F, J, 7.00 EachNon-Keyed Function x concealed mounting *LE2 L, P, W 7.00 EachCylinder Barrel x exposed screws *LE3 *A, B, E, F, J, 24.00 EachNon-Keyed Function x exposed screws *LE3 L, P, W 7.00 EachCylinder Barrel only x concealed mounting *LE4 *A, B, E, F, J, 30.00 EachNon-Keyed Function x concealed mounting *LE4 L, P, W 7.00 EachNote: LE3, LE4 not available w/double cylinder functions

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32IS-8204 IS-8215 IS-8267 IS-8291IS-8205 IS-8237 IS-8270 IS-8295 *WT *A, B, E, F, J, L, P, W $232.00 $234.00 $240.00 $250.00 $256.00 IS-8206 IS-8255 IS-8271 IS-8296IS-8213 IS-8256 IS-8289 IS-8297IS-8216 IS-8238 IS-8246 IS-8273IS-8217 IS-8239 IS-8248 IS-8290 *WT *A, B, E, F, J, L, P, W $237.00 $239.00 $249.00 $255.00 $262.00 IS-8226 IS-8240 IS-8252 IS-8292IS-8229 IS-8241 IS-8272IS-8224 IS-8230 IS-8250 IS-8268IS-8225 IS-8243 IS-8251 *WT *A, B, E, F, J, L, P, W $255.00 $257.00 $264.00 $270.00 $277.00 IS-8227 IS-8245 IS-8265IS-8228 IS-8247 IS-8266

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 32D 32IS-8204 IS-8206 IS-8215 *LS *A, B, E, F, J, L, P, W $379.00 $383.00 $386.00 $394.00 $401.00 IS-8205 IS-8213 IS-8237IS-8216 IS-8226 IS-8239 IS-8241 *LS *A, B, E, F, J, L, P, W $385.00 $389.00 $391.00 $400.00 $407.00 IS-8217 IS-8238 IS-8240IS-8224 IS-8243 IS-8250 IS-8266 *LS *A, B, E, F, J, L, P, W $400.00 $405.00 $407.00 $417.00 $423.00 IS-8225 IS-8245 IS-8265

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DIS-8204 IS-8237 *FE *A, B, E, F, J, L, P, W $290.00 $292.00 $300.00 $307.00 IS-8205IS-8216 IS-8226 IS-8239 *FE *A, B, E, F, J, L, P, W $295.00 $298.00 $305.00 $313.00IS-8217 IS-8238 IS-8240IS-8224 IS-8250 IS-8266 *FE *A, B, E, F, J, L, P, W $313.00 $315.00 $320.00 $327.00 IS-8225 IS-8265

Example: IS-8225 WTP x US3 x RH

Inside trim sets include: Inside lever, inside rose or escutcheon, trim pack (spindles, thrubolt screws, set screw, inside adaptor plate assembly),trim finish screws (for escutcheons). CYLINDERS NOT INCLUDED – Order separately.



ML-50MORTISE LOCKS

8200 OUTSIDE TRIM SETHOLDERS & STOPSApril 15, 2008 | Minimum Order $250

Lock Function Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270 A*, E, F, W $196.00 $198.00 $205.00 $213.00 $218.00 OS-8224 OS-8236 OS-8247 OS-8271 E, L, LN, O B, L, P $187.00 $189.00 $197.00 $202.00 $212.00 OS-8225 OS-8237 OS-8248 OS-8272 J $158.00 $162.00 $168.00 $173.00 $181.00 OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8297 A*, E, F, W $189.00 $191.00 $200.00 $205.00 $214.00OS-8294 E, L, LN, O B, L, P $182.00 $184.00 $190.00 $197.00 $203.00 OS-8296 J $152.00 $155.00 $164.00 $168.00 $174.00 OS-8265 A*, E, F, W $206.00 $212.00 $217.00 $222.00 $228.00 OS-8266 E, L, LN, O B, L, P $198.00 $201.00 $207.00 $215.00 $220.00 OS-8268 J $170.00 $172.00 $180.00 $184.00 $190.00

Lock Function Coastal Trim Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DOS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 TR, CR C, G*, R, S*, Y* $226.00 $246.00 $257.00 $258.00OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 TR, CR C, G*, R, S*, Y* $222.00 $239.00 $253.00 $254.00 OS-8265 OS-8266 OS-8268 TR, CR C, G*, R, S*, Y* $237.00 $257.00 $268.00 $269.00

Lock Function Metro Elements Trim Rose Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271

O, CO, CR,MA thru MW $226.00 $246.00 $257.00 $258.00 $265.00

OS-8225 OS-8237 OS-8248 OS-8272LN, TO, TR

OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 $222.00 $239.00 $253.00 $254.00 $260.00 OS-8265 OS-8266 OS-8268 $237.00 $257.00 $268.00 $269.00 $276.00

Example: OS-8225 LE1P x US3 x RHOutside trim sets include: Outside lever, outside rose or escutcheon, outside mounting plate, two thrubolt studs, washers, retaining nut, and cylinder rosettes (for cylinder functions only). CYLINDERS NOT INCLUDED – Order separately.



ML-51MORTISE LOCKS

8200 OUTSIDE TRIM SETHOLDERS & STOPSApril 15, 2008 | Minimum Order $250

Lock Function Coastal Trim *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20DOS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 *TE, CE C, G*, R, S*, Y* $322.00 $343.00 $353.00 $354.00OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 *TE, CE C, G*, R, S*, Y* $317.00 $336.00 $348.00 $349.00OS-8265 OS-8266 OS-8268 *TE, CE C, G*, R, S*, Y* $333.00 $353.00 $364.00 $365.00

Lock Function Metro Elements Trim Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 CE, TE, LE1 MA thru MW $322.00 $343.00 $353.00 $354.00 $361.00 OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 $317.00 $336.00 $348.00 $349.00 $356.00 OS-8265 OS-8266 OS-8268 $333.00 $353.00 $364.00 $365.00 $371.00


ML-52MORTISE LOCKS

8200 OUTSIDE TRIM SETApril 15, 2008 | Minimum Order $250

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 *LW1 *A, B, E, F, J, L, P, W $249.00 $251.00 $257.00 $264.00 $270.00OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 *LW1 *A, B, E, F, J, L, P, W $240.00 $245.00 $253.00 $258.00 $265.00 OS-8265 OS-8266 OS-8268 *LW1 *A, B, E, F, J, L, P, W $258.00 $262.00 $268.00 $275.00 $281.00

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 *LE1 *A, B, E, F, J, L, P, W $262.00 $264.00 $270.00 $277.00 $283.00 OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 *LE1 *A, B, E, F, J, L, P, W $256.00 $258.00 $265.00 $271.00 $279.00OS-8265 OS-8266 OS-8268 *LE1 *A, B, E, F, J, L, P, W $271.00 $275.00 $281.00 $289.00 $295.00

Lock Function *Esc. Lever Add to LE1 prices above:Standard Cylinder x concealed mounting *LE2 *A, B, E, F, J, 7.00 EachNon-Keyed Function x concealed mounting *LE2 L, P, W 7.00 EachCylinder Barrel x exposed screws *LE3 *A, B, E, F, J, 24.00 EachNon-Keyed Function x exposed screws *LE3 L, P, W 7.00 EachCylinder Barrel only x concealed mounting *LE4 *A, B, E, F, J, 30.00 EachNon-Keyed Function x concealed mounting *LE4 L, P, W 7.00 EachNote: LE3, LE4 not available w/double cylinder functions

Example: OS-8225 LW1P x US3 x RH

Outside trim sets include: Outside lever, outside rose or escutcheon, outside mounting plate, two thrubolt studs, washers, retaining nut, andcylinder rosettes (for cylinder functions only). CYLINDERS NOT INCLUDED – Order separately.



ML-53MORTISE LOCKS


Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32OS-8204 OS-8229 OS-8241 OS-8255OS-8205 OS-8230 OS-8243 OS-8256OS-8216 OS-8231 OS-8245 OS-8267OS-8217 OS-8235 OS-8246 OS-8270OS-8224 OS-8236 OS-8247 OS-8271 *WT *A, B, E, F, J, L, P, W $245.00 $249.00 $255.00 $260.00 $268.00 OS-8225 OS-8237 OS-8248 OS-8272OS-8226 OS-8238 OS-8250 OS-8273OS-8227 OS-8239 OS-8251 OS-8289OS-8228 OS-8240 OS-8252OS-8215 OS-8294 OS-8296 OS-8297 *WT *A, B, E, F, J, L, P, W $238.00 $240.00 $250.00 $256.00 $263.00 OS-8265 OS-8266 OS-8268 *WT *A, B, E, F, J, L, P, W $256.00 $258.00 $265.00 $271.00 $279.00

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 15, 26 32D 32OS-8204 OS-8225 OS-8237 OS-8243OS-8205 OS-8226 OS-8238 OS-8245OS-8216 OS-8231 OS-8239 OS-8250 *LS *A, B, E, F, J, L, P, W $398.00 $401.00 $405.00 $415.00 $421.00OS-8217 OS-8235 OS-8240OS-8224 OS-8236 OS-8241OS-8215 *LS *A, B, E, F, J, L, P, W $392.00 $397.00 $399.00 $409.00 $416.00 OS-8265 OS-8266 *LS *A, B, E, F, J, L, P, W $409.00 $414.00 $416.00 $424.00 $431.00

Lock Function *Esc. Lever 4, 26D 10, 10B 3, 9, 26 10BL, 20DOS-8204 OS-8224 OS-8235 OS-8239OS-8205 OS-8225 OS-8236 OS-8240 *FE *A, B, E, F, J, L, P, W $304.00 $307.00 $314.00 $319.00 OS-8216 OS-8226 OS-8237 OS-8250OS-8217 OS-8231 OS-8238OS-8265 OS-8266 *FE *A, B, E, F, J, L, P, W $315.00 $317.00 $323.00 $330.00

Example: OS-8225 FEP x US3 x RH

Outside trim sets include: Outside lever, outside rose or escutcheon, outside mounting plate, two thrubolt studs, washers, retaining nut, andcylinder rosettes (for cylinder functions only). CYLINDERS NOT INCLUDED – Order separately.



ML-54MORTISE LOCKS


Lock Function Rose Lever 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 E, L, O B, C $179.00 $181.00 $186.00 IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 E, L, O B, C $183.00 $185.00 $193.00IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 E, L, O B, C $201.00 $204.00 $210.00IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 *KE1 B, C $282.00 $287.00 $294.00IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 *KE1 B, C $289.00 $291.00 $300.00 IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 *KE1 B, C $307.00 $310.00 $315.00 IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Lock Function *Esc. Knob Add to KE1 prices above:Standard Cylinder x concealed mounting *KE2 B, C 7.00 EachNon-Keyed Function x concealed mounting *KE2 7.00 EachCylinder Barrel x exposed screws *KE3 B, C 25.00 EachNon-Keyed Function x exposed screws *KE3 7.00 EachCylinder Barrel only x concealed mounting *KE4 B, C 31.00 EachNon-Keyed Function x concealed mounting *KE4 7.00 Each

Note: KE3, KE4 not available w/double cylinder functions

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 *KW1 B, C $261.00 $263.00 $270.00IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 *KW1 B, C $265.00 $269.00 $276.00IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 *KW1 B, C $281.00 $286.00 $291.00IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Example: IS-7825 KE1B x US3 x RH

Inside trim sets include: Inside knob, inside rose or escutcheon, trim pack (spindles, thrubolt screws, set screws, inside adaptor plate assembly),trim finish screws (for escutcheons). CYLINDERS NOT INCLUDED – Order separately.

*Note: All escutcheon designs are handed. Please specify hand when ordering.


ML-55MORTISE LOCKS


Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 *WT B, C $244.00 $246.00 $255.00 IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 *WT B, C $252.00 $254.00 $261.00IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 *WT B, C $268.00 $270.00 $277.00IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 *WT N $264.00 $269.00 $276.00IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 *WT N $270.00 $275.00 $280.00IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 *WT N $286.00 $289.00 $295.00IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 32, 32DIS-7804 IS-7806 IS-7815 *KS K $414.00 $419.00 $424.00IS-7805 IS-7813 IS-7837IS-7816 IS-7826 IS-7839 IS-7841 *KS K $421.00 $424.00 $431.00IS-7817 IS-7838 IS-7840IS-7824 IS-7843 IS-7850 IS-7866 *KS K $437.00 $441.00 $447.00IS-7825 IS-7845 IS-7865

Lock Function *Esc. Knob 4, 10, 32D 3, 9, 10B, 15, 32 10BL, 20DIS-7804 IS-7837 *PT $364.00 $379.00 $383.00 IS-7815IS-7816 IS-7817 IS7826 *PT $370.00 $385.00 $388.00IS-7824 IS-7843 IS-7850 *PT $387.00 $401.00 $405.00 IS-7825 IS-7845 IS-7865Note: Must specify “Push” or “Pull” when ordering.

Lock Function Rose Knob 4, 26D 32DIS-7804 IS-7815 IS-7867IS-7805 IS-7837 IS-7895 *SL D $456.00 $458.00IS-7806 IS-7855 IS-7896IS-7813 IS-7856 IS-7897IS-7816 IS-7838 IS-7846IS-7817 IS-7839 IS-7848 *SL D $460.00 $462.00 IS-7826 IS-7840 IS-7852IS-7829 IS-7841 IS-7892IS-7824 IS-7830 IS-7850 IS-7868IS-7825 IS-7843 IS-7851 *SL D $475.00 $477.00IS-7827 IS-7845 IS-7865IS-7828 IS-7847 IS-7866

Example: IS-7825 WTB x US3 x RH

Inside trim sets include: Inside knob, inside rose or escutcheon, trim pack (spindles, thrubolt screws, set screws, inside adaptor plate assembly), trim finish screws (for escutcheons). CYLINDERS NOT INCLUDED – Order separately.



ML-56MORTISE LOCKS


Lock Function Rose Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DOS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 E, L, O B, C $188.00 $191.00 $199.00OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 E, L, O B, C $183.00 $185.00 $193.00OS-7865 OS-7866 OS-7868 E, L, O B, C $201.00 $204.00 $210.00

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DOS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 *KE1 B, C $300.00 $304.00 $310.00OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 *KE1 B, C $294.00 $297.00 $305.00OS-7865 OS-7866 OS-7868 *KE1 B, C $311.00 $313.00 $319.00

Lock Function *Esc. Knob Add to KE1 prices above:Standard Cylinder x concealed mounting *KE2 B, C 7.00 EachNon-Keyed Function x concealed mounting *KE2 7.00 EachCylinder Barrel x exposed screws *KE3 B, C 25.00 EachNon-Keyed Function x exposed screws *KE3 7.00 EachCylinder Barrel only x concealed mounting *KE4 B, C 31.00 EachNon-Keyed Function x concealed mounting *KE4 7.00 EachNote: KE3, KE4 not available w/double cylinder functions

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32DOS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 *KW1 B, C $274.00 $276.00 $281.00OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 *KW1 B, C $268.00 $270.00 $277.00OS-7865 OS-7866 OS-7868 *KW1 B, C $282.00 $287.00 $294.00

Example: OS-7825 KW1B x US3 x RH

Outside trim sets include: Outside knob, outside rose or escutcheon, outside mounting plate, two thrubolt studs, washers, retaining nut, and cylinderrosettes (for cylinder functions only). CYLINDERS NOT INCLUDED – Order separately.



ML-57MORTISE LOCKS


Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

OS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 *WT B, C $258.00 $261.00 $268.00OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 *WT B, C $253.00 $255.00 $262.00OS-7865 OS-7866 OS-7868 *WT B, C $269.00 $271.00 $278.00

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

OS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 *WT N $278.00 $281.00 $288.00 OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 *WT N $274.00 $277.00 $282.00 OS-7865 OS-7866 OS-7868 *WT N $288.00 $291.00 $298.00

Lock Function *Esc. Knob 4, 10, 26D 3, 9, 10B, 15, 26 32, 32D

OS-7804 OS-7825 OS-7837 OS-7843OS-7805 OS-7826 OS-7838 OS-7845OS-7816 OS-7831 OS-7839 OS-7850 *KS K $436.00 $439.00 $446.00 OS-7817 OS-7835 OS-7840OS-7824 OS-7836 OS-7841OS-7815 *KS K $431.00 $435.00 $439.00OS-7865 OS-7866 *KS K $447.00 $451.00 $457.00

Lock Function *Esc. Knob 4, 10, 32D 3, 9, 10B, 32 10BL, 20D

OS-7804 OS-7824 OS-7843OS-7816 OS-7826 OS-7845 *PT $383.00 $398.00 $401.00 OS-7817 OS-7837 OS-7850OS-7815 *PT $378.00 $390.00 $421.00 OS-7865 *PT $392.00 $408.00 $411.00 Note: Must specify “Push” or “Pull” when ordering.

Lock Function Rose Knob 4, 26D 32D

OS-7804 OS-7829 OS-7841 OS-7855OS-7805 OS-7830 OS-7843 OS-7856OS-7816 OS-7831 OS-7845 OS-7867OS-7817 OS-7835 OS-7846OS-7824 OS-7836 OS-7847 SL D $482.00 $484.00OS-7825 OS-7837 OS-7848OS-7826 OS-7838 OS-7850OS-7827 OS-7839 OS-7851OS-7828 OS-7840 OS-7852OS-7815 OS-7894 OS-7896 OS-7897 SL D $476.00 $479.00 OS-7865 OS-7866 OS-7868 SL D $492.00 $494.00

Example: OS-7825 KW1B x US3 x RH

Outside trim sets include: Outside knob, outside rose or escutcheon, outside mounting plate, two thrubolt studs, washers, retaining nut, andcylinder rosettes (for cylinder functions only). CYLINDERS NOT INCLUDED – Order separately.



ML-58MORTISE LOCKS

8200 LEVERSApril 15, 2008 | Minimum Order $250

Outside LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D 32D 3282-0151 A - RH/RHR $130.78 $138.31 $145.81 $153.34 $153.34 $168.37 82-0152 A - LH/LHR $130.78 $138.31 $145.81 $153.34 $153.34 $168.37 82-0153 B $117.24 $124.76 $132.28 $139.80 $139.80 $147.31 82-0154 E $130.78 $138.31 $145.81 $153.34 $153.34 $168.3782-0155 F $130.78 $138.31 $145.81 $153.34 $153.34 $168.3782-0156 J $96.21 $103.74 $111.24 $118.76 $118.76 $126.27 97-0486 (for FE Esc) J $96.22 $103.76 $111.26 $118.79 82-0157 L $117.24 $124.76 $132.28 $139.80 $139.80 $147.31 97-0485 (for FE Esc) L $117.26 $124.79 $132.29 $139.83 82-0158 P $117.24 $124.76 $132.28 $139.80 $139.80 $147.31 97-0484 (for FE Esc) P $117.26 $124.79 $132.29 $139.8382-0159 W $130.78 $138.31 $145.81 $153.34 $153.34 $168.37

Outside Coastal Series LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D82-0519 C $160.85 $175.87 $190.91 $193.9197-0567 (for FE Esc) C $160.85 $175.87 $190.91 $193.9182-0517 R $160.85 $175.87 $190.91 $193.9182-0522 S - LH/LHR $160.85 $175.87 $190.91 $193.9182-0523 S - RH/RHR $160.85 $175.87 $190.91 $193.9182-0526 G - LH/LHR $160.85 $175.87 $190.91 $193.9182-0527 G - RH/RHR $160.85 $175.87 $190.91 $193.9182-0530 Y - LH/LHR $160.85 $175.87 $190.91 $193.9182-0531 Y - RH/RHR $160.85 $175.87 $190.91 $193.91

8200 Outside Metro Element LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D, 32D 3282-0803 MA $160.85 $175.87 $190.91 $193.91 $199.8282-0806 MB $160.85 $175.87 $190.91 $193.91 $199.8282-0809 MC $160.85 $175.87 $190.91 $193.91 $199.8282-0812 MD $160.85 $175.87 $190.91 $193.91 $199.8282-0815 ME $160.85 $175.87 $190.91 $193.91 $199.8282-0818 MF $160.85 $175.87 $190.91 $193.91 $199.8282-0821 MG $160.85 $175.87 $190.91 $193.91 $199.8282-0824 MH - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0827 MH - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0830 MI $160.85 $175.87 $190.91 $193.91 $199.8282-0833 MJ $160.85 $175.87 $190.91 $193.91 $199.8282-0836 MK - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0839 MK - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0842 ML - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0845 ML - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0848 MM - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0851 MM - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0854 MN - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0857 MN - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0860 MO $160.85 $175.87 $190.91 $193.91 $199.8282-0863 MP $160.85 $175.87 $190.91 $193.91 $199.8282-0866 MQ - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0869 MQ - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0872 MR $160.85 $175.87 $190.91 $193.91 $199.8282-0875 MS - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0878 MS - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0881 MT - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0884 MT - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0887 MU - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0890 MU - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0893 MV - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0896 MV - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0899 MW $160.85 $175.87 $190.91 $193.91 $199.82


ML-59MORTISE LOCKS

8200 LEVERSApril 15, 2008 | Minimum Order $250

Inside LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D 32D 3281-0467 A - LH/LHR $130.78 $138.30 $145.82 $153.34 $153.34 $168.37 81-0468 A - RH/RHR $130.78 $138.30 $145.81 $153.34 $153.34 $168.37 81-0490 B $117.47 $124.76 $132.28 $139.80 $139.80 $147.3181-0470 E $130.78 $138.30 $145.82 $153.34 $153.34 $168.37 81-0471 F $130.78 $138.30 $145.82 $153.34 $153.34 $168.37 81-0447 J $96.21 $103.74 $111.23 $118.76 $118.76 $126.27 81-0489 L $117.24 $124.76 $132.28 $139.80 $139.80 $147.31 81-0513 P $117.24 $124.76 $132.28 $139.80 $139.80 $147.3181-0445 W $130.78 $138.30 $145.82 $153.34 $153.34 $168.37

Inside Coastal Series LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D82-0518 C $160.85 $175.87 $190.91 $193.9182-0516 R $160.85 $175.87 $190.91 $193.9182-0520 S - LH/LHR $160.85 $175.87 $190.91 $193.9182-0521 S - RH/RHR $160.85 $175.87 $190.91 $193.9182-0524 G - LH/LHR $160.85 $175.87 $190.91 $193.9182-0525 G - RH/RHR $160.85 $175.87 $190.91 $193.9182-0528 Y - LH/LHR $160.85 $175.87 $190.91 $193.9182-0529 Y - RH/RHR $160.85 $175.87 $190.91 $193.91

8200 Inside Metro Element LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D, 32D 3282-0802 MA $160.85 $175.87 $190.91 $193.91 $199.8282-0805 MB $160.85 $175.87 $190.91 $193.91 $199.8282-0808 MC $160.85 $175.87 $190.91 $193.91 $199.8282-0811 MD $160.85 $175.87 $190.91 $193.91 $199.8282-0814 ME $160.85 $175.87 $190.91 $193.91 $199.8282-0817 MF $160.85 $175.87 $190.91 $193.91 $199.8282-0820 MG $160.85 $175.87 $190.91 $193.91 $199.8282-0823 MH - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0826 MH - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0829 MI $160.85 $175.87 $190.91 $193.91 $199.8282-0832 MJ $160.85 $175.87 $190.91 $193.91 $199.8282-0835 MK - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0838 MK - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0841 ML - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0844 ML - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0847 MM - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0850 MM - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0853 MN - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0856 MN - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0859 MO $160.85 $175.87 $190.91 $193.91 $199.8282-0862 MP $160.85 $175.87 $190.91 $193.91 $199.8282-0865 MQ - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0868 MQ - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0871 MR $160.85 $175.87 $190.91 $193.91 $199.8282-0874 MS - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0877 MS - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0880 MT - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0883 MT - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0886 MU - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0889 MU - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0892 MV - LH $160.85 $175.87 $190.91 $193.91 $199.8282-0895 MV - RH $160.85 $175.87 $190.91 $193.91 $199.8282-0898 MW $160.85 $175.87 $190.91 $193.91 $199.82

Note: Inside lever handle is used for outside trim with 31, 35, 36 (trim-one-side) functions.

Note: Levers provided with lever spring & set screw.Handed levers should be ordered to the hand of the door - example: a RH door/lock will need a RH O/S lever and a RH I/S lever


ML-60MORTISE LOCKS

8200 MILLED LEVERS & 7800 KNOBSApril 15, 2008 | Minimum Order $250

Milled Outside LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D 32D 32

82-0306 A - LH/LHR $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0307 A - RH/RHR $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0308 B $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0311 E $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0312 F $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0309 J $169.99 $177.51 $185.02 $192.55 $192.55 $200.05

82-0313 L $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0314 P $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0310 W $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

Milled Inside LeversPart # Design 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D 32D 32

82-0315 A - LH/LHR $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0316 A - RH/RHR $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0317 B $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0320 E $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0321 F $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

82-0318 J $169.99 $177.51 $185.02 $192.55 $192.55 $200.05

82-0322 L $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0323 P $191.04 $198.56 $206.08 $213.61 $213.61 $221.09

82-0319 W $204.57 $212.10 $219.61 $227.13 $227.13 $242.16

Outside KnobsPart # Design 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

78-2875 B $109.73 $111.24 $111.24

78-2876 C $109.73 $111.24 $111.24

78-2742 K $193.91 $201.80 N/A

78-2759 N $109.73 $111.24 $111.24

92-0084 D $322.03 (4, 26D) N/A $334.90 (32D)

Inside KnobsPart # Design 4, 10, 26D 3, 9, 10B, 15, 26 10BL, 20D, 32, 32D

78-2877 B $109.73 $111.24 $111.24

78-2878 C $109.73 $111.24 $111.24

78-2743 K $193.91 $201.42 N/A

78-2755 N $109.73 $111.24 $111.24

92-0086 D $322.03 (4, 26D) N/A $334.90 (32D)

Note: B & C Knob not available on KS Escutcheon.

(1485) K Knob only available on KS Escutcheon.

(1673) N Knob only available on WT Escutcheon.

Note: Inside lever/knob handle is used for outside trim with 31, 35, 36 (trim-one-side) functions.

Note: Levers provided with lever spring & set screw.Handed levers should be ordered to the hand of the door - example: a RH door/lock will need a RH O/S lever and a RH I/S lever


ML-61MORTISE LOCKS

8200/7800—INSIDE ESCUTCHEONSHOLDERS & STOPS April 15, 2008 | Minimum Order $250

Inside Escutcheons Used for following Part # Design Functions 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D 32D 32

77-0736 KE (78) Blank $129.22 $130.78 $132.28 $135.28 $135.28 $138.31

81-0556 LE1/3/4Lever Only $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

KE1/3/4

77-2300 LE1/3/4Turn Lever Only $143.17 $144.65 $146.17 $149.17 $149.17 $152.17

KE1/3/4

81-4645 LE1/3/4Knob/Lever & Turn Lever $144.65 $133.80 $147.67 $150.68 $150.68 $153.68

KE1/3/4

77-0062 LE1/KE1 Cyl. Only $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

81-0559 LE1/KE1 Knob/Lever & Cyl. $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

77-2591 LE1/KE1 Cyl. & Turn Lever $144.65 $146.17 $147.67 $150.68 $150.68 $153.68

81-0563 LE2/KE2 Knob/Lever Only $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

77-3477 LE2/KE2 Turn Lever Only $143.17 $144.65 $146.17 $149.17 $149.17 $152.17

81-4647 LE2/KE2 Knob/Lever & Turn Lever $144.65 $146.17 $147.67 $150.68 $150.68 $153.68

77-0742 LE2/KE2 Cyl. Only $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

81-0562 LE2/KE2 Knob/Lever & Cyl. $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

77-3473 LE2/KE2 Cyl. & Turn Lever $144.65 $146.17 $147.67 $150.68 $150.68 $153.68

81-0579 LS/KS Blank $275.08 $276.57 $278.10 NA NA NA

81-0576 LS/KS Knob/Lever Only $276.57 $278.10 $279.59 NA NA NA

81-4684 LS/KS Turn Lever Only $288.97 $290.49 $291.98 NA NA NA Each

81-4682 LS/KS Knob/Lever & Turn Lever $291.98 $293.49 $295.00 NA NA NA

81-0581 LS/KS Cyl. Only $276.57 $278.10 $279.59 NA NA NA

81-0577 LS/KS Knob/Lever & Cyl. $279.59 $281.10 $282.59 NA NA NA

81-4685 LS/KS Cyl. & Turn Lever $291.98 $293.49 $282.59 NA NA NA

77-3428 LW1/KW1 Knob/Lever Only $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-3427 LW1/KW1 Blank $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-3435 LW1/KW1 Turn Lever Only $108.59 $110.08 $111.59 $114.60 $114.60 $117.61

77-3432 LW1/KW1 Knob/Lever & Turn Lever $110.08 $111.59 $113.11 $116.12 $116.12 $119.10

77-3430 LW1/KW1 Cyl. Only $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-3429 LW1/KW1 Knob/Lever & Cyl. $97.72 $99.22 $100.71 $103.74 $103.74 $106.71

77-3431 LW1/KW1 Cyl. & Turn $97.72 $99.22 $100.71 $103.74 $103.74 $106.71

77-5978 LW1/KW1 Cyl & Lever (31, 35, 36) $97.72 $99.22 $100.71 $103.74 $103.74 $106.71

81-0647 WT (78/82) Knob/Lever Only $90.19 $91.69 $93.20 $96.21 $96.21 $99.22

81-4699 WT (78/82) Turn Lever Only $102.58 $104.07 $105.59 $108.59 $108.59 $111.59

81-4594 WT (78/82) Knob/Lever & Turn Lever $105.59 $107.08 $108.59 $111.59 $111.59 $114.60

81-0651 WT (78/82) Cyl. Only $90.19 $91.69 $93.19 $96.21 $96.21 $99.22

81-0648 WT (78/82) Knob/Lever & Cyl. $93.19 $94.69 $96.21 $99.22 $99.22 $102.21

81-4698 WT (78/82) Turn Lever & Cyl. $105.59 $107.08 $108.59 $111.59 $111.59 $114.60

81-0646 WT(78/82) Blank $88.57 $90.07 $91.55 $94.58 $94.58 $97.57



ML-62MORTISE LOCKS

8200 - INSIDE ESCUTCHEONS

Inside Coastal Series EscutcheonsPart # Design Used for Functions 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D

82-0513 CE Blank $154.84 $169.85 $184.89 $187.91

82-0544 CE Lever Only $156.33 $171.36 $186.38 $189.40

82-0546 CE Cyl. Only $156.33 $171.36 $186.38 $189.40

82-0547 CE Lever & Cyl. $157.84 $172.88 $187.91 $190.91

82-0548 CE Blank-Dummy $154.84 $169.85 $184.89 $187.91

82-3907 CE Turn Lever Only $168.70 $183.74 $198.78 $201.78

82-3909 CE Lever & Turn Lever $170.22 $185.26 $200.30 $203.29

82-3911 CE Cyl. & Turn Lever $170.22 $185.26 $200.30 $203.29

82-0514 TE Blank $154.84 $169.85 $184.89 $187.91

82-0560 TE Lever Only $156.33 $171.36 $186.38 $189.40

82-0562 TE Cyl. Only $156.33 $171.36 $186.38 $189.40

82-0563 TE Lever & Cyl. $157.84 $172.88 $187.91 $190.91

82-0564 TE Blank-Dummy $154.84 $169.85 $184.89 $187.91

82-3908 TE Turn Lever Only $168.70 $183.74 $198.78 $201.78

82-3910 TE Lever & Turn Lever $170.22 $185.26 $200.30 $203.29

82-3912 TE Cyl. & Turn Lever $170.22 $185.26 $200.30 $203.29

8200 Metro Elements Inside EscutcheonsPart # Design Used for Functions 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D, 32D 3277-0062 LE1 Cylinder Only $130.78 $132.28 $133.80 $136.78 $139.79

77-0736 LE1 Blank $129.22 $130.78 $132.28 $135.28 $138.30

82-0936 LE1 Cylinder & Lever $132.28 $133.80 $135.28 $138.31 $141.30

82-0937 LE1 Lever Only $130.78 $132.28 $133.80 $136.78 $139.79

82-4594 LB-LE1 Turn ADA & Lever $153.51 $155.02 $156.52 $159.53 $162.53

77-2300 LE1 Turn Only $143.17 $144.65 $146.17 $149.17 $152.17

77-2951 LE1 Cylinder and Turn $144.65 $146.17 $147.67 $150.68 $153.68

82-3817 LB-LE1 Cylinder & Turn ADA $153.51 $155.02 $156.52 $159.53 $162.53

82-3821 LB-LE1 Turn ADA $152.01 $153.51 $155.02 $158.02 $161.02

82-4586 LE1 Turn & Lever $144.65 $146.17 $147.67 $150.68 $153.68

82-0546 CE Cylinder Only $156.33 $171.36 $186.38 $189.40

82-0548 CE Blank $154.84 $169.85 $184.89 $187.91

82-0924 CE Cylinder & Lever $157.84 $172.88 $187.91 $190.91

82-0925 CE Lever Only $156.33 $171.36 $186.38 $189.40

82-4589 LB-CE Turn ADA & Lever $179.08 $194.11 $209.14 $212.15

82-3907 CE Turn Only $168.70 $183.74 $198.78 $201.78

82-3911 CE Cylinder and Turn $168.70 $183.74 $198.78 $201.78

82-4010 LB-CE Turn ADA $177.55 $192.59 $207.62 $210.63

82-4014 LB-CE Cylinder and Turn ADA $177.55 $192.59 $207.62 $210.63

82-4587 CE Turn & Lever $170.22 $185.26 $200.30 $203.29

82-0562 TE Cylinder Only $156.33 $171.36 $186.38 $189.40

82-0564 TE Blank $154.84 $169.85 $184.89 $187.91

82-0930 TE Cylinder & Lever $157.84 $172.88 $187.91 $190.91

82-0931 TE Lever Only $156.33 $171.36 $186.38 $189.40

82-4590 LB-TE Turn & Lever ADA $179.08 $194.11 $209.14 $212.15

82-3908 TE Turn Only $168.70 $183.74 $198.78 $201.78

82-3912 TE Cylinder and Turn $170.22 $185.26 $200.30 $203.29

82-4011 LB-TE Turn ADA $177.55 $192.59 $207.62 $210.63

82-4015 LB-TE Cylinder and Turn ADA $179.08 $194.11 $209.14 $212.15

82-4588 TE Turn & Lever $170.22 $185.26 $200.30 $203.29



ML-63MORTISE LOCKS

8200/7800—OUTSIDE ESCUTCHEONS

8200 Metro Elements Outside EscutcheonsPart # Design Used for Functions 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D, 32D

77-0559 LE1 Cylinder Only $130.78 $132.28 $133.80 $136.78

82-0939 LE1 Cylinder & Lever $132.28 $133.80 $135.28 $138.31

82-0940 LE1 Lever Only $130.78 $132.28 $133.80 $136.78

82-4593 LE1 Lever & Emergency Release $144.65 $146.17 $147.67 $150.68

82-0555 CE Cylinder Only $156.33 $171.36 $186.38 $189.40

82-0927 CE Cylinder & Lever $157.84 $172.88 $187.91 $190.91

82-0928 CE Lever Only $156.33 $171.36 $186.38 $189.40

82-4584 CE Lever & Emergency Release $170.22 $185.26 $200.30 $203.29

82-0571 TE Cylinder Only $156.33 $171.36 $186.38 $189.40

82-0933 TE Cylinder & Lever $157.84 $172.88 $187.91 $190.91

82-0934 TE Lever Only $156.33 $171.36 $186.38 $189.40

82-4585 TE Lever & Emergency Release $170.22 $185.26 $200.30 $203.29

Outside Escutcheons Used for following Part # Design Functions 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D 32D 32

81-0552 LE1/2/3/4 Lever Only $130.78 $132.28 $133.80 $136.78 NA NAKE1/2/3/4

81-4642 LE1/2/3/4 Knob/Lever $144.65 $146.17 $147.67 $150.68 NA NAKE1/2/3/4 & Emerg. Rel.

81-0559 LE1/2 Cyl. Only $132.28 $133.80 $135.28 $138.31 NA NAKE1/2

81-0557 LE1/2 Knob/Lever & Cyl. $132.28 $133.80 $135.28 $138.31 NA NAKE1/2

77-0062 LE1/KE1 20 $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

81-0559 LE1/KE1 31-35-36 $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

77-0742 LE2/KE2 20 $130.78 $132.28 $133.80 $136.78 $136.78 $139.80 Each

81-0562 LE2/KE2 31-35-36 $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

77-0738 LE3/4 06-91-03-21 $130.78 $132.28 $133.80 $136.78 NA NAKE3/4

81-0560 LE3/4 04-05-37-70-71- $132.28 $133.80 $135.28 $138.31 NA NAKE3/4 24-25-43-45-50

77-1211* LE3/KE3 20 $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

81-0555* LE3/KE3 31-35-36 $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

77-1207* LE4/KE4 20 $130.78 $132.28 $133.80 $136.78 $136.78 $139.80

81-0558* LE4/KE4 31-35-36 $132.28 $133.80 $135.28 $138.31 $138.31 $141.30

81-0584 LS/KS Knob/Lever Only $276.57 $278.10 $279.59 NA NA NA

81-4681 LS/KS Knob/Lever & Emerg. $291.98 $293.49 $295.00 NA NA NA

81-0585 LS/KS Cyl. Only $276.57 $278.10 $279.59 NA NA NA

81-0586 LS/KS Knob/Lever & Cyl. $279.59 $281.10 $282.59 NA NA NA

81-0587 LS/KS Knob/Lever, Cyl., & Ind.$281.10 $282.59 NA NA NA NA

81-0574 LS/KS Blank $275.08 $276.57 $278.10 NA NA NA

*Please specify finish.



ML-64MORTISE LOCKS

8200/7800—OUTSIDE ESCUTCHEONS

Outside Escutcheons Used for following Part # Design Functions 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D 32D 32

77-3448 LW1/KW1 Knob/Lever Only $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-3454 LW1/KW1 Knob/Lever & Emerg. Rel. $110.08 $111.59 $113.11 $116.12 $116.12 $119.10

77-3450 LW1/KW1 Cyl. Only $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-3449 LW1/KW1 Knob/Lever & Cyl. $97.72 $99.22 $100.71 $103.74 $103.74 $106.71

77-3430 LW1/KW1 20 $96.21 $97.72 $99.22 $102.21 $102.21 $105.23

77-5978 LW1/KW1 31-35-36 $97.72 $99.22 $100.71 $103.74 $103.74 $106.71 Each

81-0647 WT (78/82) Knob/Lever Only $90.19 $91.69 $93.19 $96.21 $96.21 $99.22

81-4593 WT (78/82) Knob/Lever & Turn Lever $105.59 $107.08 $108.59 $111.59 $111.59 $114.60

81-0651 WT (78/82) Cyl. Only $90.19 $91.69 $93.20 $96.21 $96.21 $99.22

81-0648 WT (78/82) Knob/Lever & Cyl. $93.19 $94.69 $96.21 $99.22 $99.22 $102.21

81-0646 WT (78/82) Blank $88.57 $90.07 $91.55 $94.58 $94.58 $97.57

Outside Coastal Series EscutcheonsPart # Design Used for Functions 4, 26D 10,10B 3, 9, 15, 26 10BL, 20D

82-0536 CE Lever & Cyl. $157.84 $172.88 $187.91 $190.91

82-0546 CE 20 $156.33 $171.36 $186.38 $189.40

82-0547 CE 31, 35, 36 $157.84 $172.88 $187.91 $190.91

82-0553 CE Lever Only $156.33 $171.36 $186.38 $189.40

82-0555 CE Cyl. Only $156.33 $171.36 $186.38 $189.40

82-3913 CE Lever & Emerg. Rel. $170.22 $185.26 $200.30 $203.29

82-0538 TE Lever & Cyl. $157.84 $172.88 $187.91 $190.91

82-0562 TE 20 $156.33 $171.36 $186.38 $189.40

82-0563 TE 31, 35, 36 $157.84 $172.88 $187.91 $190.91

82-0569 TE Lever Only $156.33 $171.36 $186.38 $189.40

82-0571 TE Cyl. Only $156.33 $171.36 $186.38 $189.40

82-3914 TE Lever & Emerg. Rel. $170.22 $185.26 $200.30 $203.29



ML-65MORTISE LOCKS

7800/8200 - ROSES/TURNS

7800/8200 Rose Design (Same for inside & outside)Part # Design 4, 26D 10, 10B, 3, 9, 15, 26 10BL, 20D, 32D 32695E E $41.00 $43.00 $44.00 $45.00 $47.00695L L $41.00 $43.00 $44.00 $45.00 $47.00695LN LN $34.00 $35.00 $37.00 $38.00 $40.00695O O $35.00 $37.00 $38.00 $40.00 $41.00

7800/8200 Rose Design (Same for inside & outside)Part # Design 4, 26D 10, 10B, 3, 9, 15, 26 10BL, 20D, 32D 32696LN LN $34.00 $35.00 $37.00 $38.00 $40.00696CR CR $48.00 $60.00 $75.00 $78.00 $83.00696TR TR $48.00 $60.00 $75.00 $78.00 $83.00696O O $35.00 $37.00 $38.00 $40.00 $41.00696CO CO $48.00 $60.00 $75.00 $78.00 $83.00696TO TO $48.00 $60.00 $75.00 $78.00 $83.00

7800 Emergency Release/Thumb TurnsPart # Design 3, 4, 9, 10, 10B, 15, 26, 26D 10BL, 20D, 32, 32D184W Outside Emergency Release $37.00 $44.00 184KA Outside Emergency Release $73.00 $88.00 126 Thumb Turn Lever (7891 & 7892 function only) $73.00 $81.00130W Thumb Turn Lever $37.00 $44.00 130KA Thumb Turn Lever – Used w/E Rose $131.00 $147.00

8200 Emergency Release/Thumb TurnsPart # Design 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32184KB Outside Emergency Release $34.00 $35.00 $37.00 $38.00 $41.00130KB Thumb Turn Lever $34.00 $35.00 $37.00 $38.00 $41.00130LB Thumb Turn Lever - Large ADA $48.00 $50.00 $51.00 $52.00 $54.00

8200 Coastal Series Rose Design (Same for inside & outside)Part # Design 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D695TR TR $48.00 $60.00 $75.00 $78.00695CR CR $48.00 $60.00 $75.00 $78.00

8200 Coastal Series Metro Element Emergency Release/Thumb TurnsPart # Design 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D 32184KC Outside Emergency Release - Contemporary $48.00 $50.00 $52.00 $54.00184KT Outside Emergency Release - Traditional $48.00 $50.00 $52.00 $54.00130KC Thumb Turn Lever - Contemporary $48.00 $50.00 $52.00 $54.00130KT Thumb Turn Lever - Traditional $48.00 $50.00 $52.00 $54.00130LC Thumb Turn Lever - Large ADA - Contemporary $60.00 $62.00 $66.00 $70.00 130LT Thumb Turn ADA version $60.00 $62.00 $66.00 $70.00 $70.00

7800/8200 IndicatorsPart # Description 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D, 32D 32185C Visual Indicator (49-) $75.00 $77.00 $78.00 $79.00 $81.00Note: Used with 30, 36, 37 function – 7800 & 8200 Rose Trims: CR, L, LN, TR, E, O

Used with 26, 29, 38, 39, 40, 41 function – Rose Trim 8200 LN185P Occupancy Indicator (49-) $75.00 $77.00 $78.00 $79.00 $81.00Note: Used with 65, 66, 68 functions Rose Trim 7800 & 8200 CR, E, L, LN, O, TR

185S-1 Secured Indicator Rose (1-3/8" thick door) (50-) $79.00 $81.00 $83.00 $84.00 $85.00185S-2 Secured Indicator Rose (1-3/4" thick door) (50-) $79.00 $81.00 $83.00 $84.00 $85.00185S-3 Secured Indicator Rose (2" thick door) (50-) $79.00 $81.00 $83.00 $84.00 $85.00185S-4 Secured Indicator Rose (2-1/4" thick door) (50-) $79.00 $81.00 $83.00 $84.00 $85.00

Note: Used with 24, 25, 26, 28, 29, 30, 36, 37, 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 functions – all Rose type trims only.Note: When ordering with lock, specify 49 or 50 prefix.

7800/8200 Anti-Vandal Pull trims – Available with all Trims except LS/KS, FE, PTPart # Description 32D667-1 RHRB Pull for 04, 06, 17, 28, 29, 30, 31, 50, 51, 52, 91, 92 functions667-2 LHRB Pull for 04, 06, 17, 28, 29, 30, 31, 50, 51, 52, 91, 92 functions667-3 RHRB Pull for 03, 20, 21, 22, 23 functions667-4 LHRB Pull for 03, 20, 21, 22, 23 functions $368.00667-5 RHRB Pull without Lip for inactive door667-6 RHRB Pull without Lip for inactive doorNote: When ordering with lock, specify AV prefix.



ML-66MORTISE LOCKS

7800/8200 – MOUNTING KITS

8200 Inside Trim Kit (04, 05, 15, 16, 17, 24, 25, 26, 37,43, 45, 50, 65, 66, 70, 71, 72, 73, 85, 86, 94 functions)Part # Description Price

82-3212 CE, KS, LE (1-4), TE, LS - 1 3/4", 2" Door $40.85 82-3873 CE, KS, LE (1-4), TE, LS - 2 1/4" Door $49.60 82-3211 CR, TR, LN, LW1, O - 1 3/4", 2" Door $40.85 82-3874 CR, TR, LN, LW1, O - 2 1/4" Door $49.60 82-3213 L, WT - 1 3/4", 2" Door $41.55 82-3875 L, WT - 2 1/4" Door $49.60 8200 One-Side Trim Kit (06, 13, 31, 35, 36, 91, 92, 95 functions)Part # Description

82-3208 LN, E, O, CR, TR Rose/LW1, KW1 Esc. - 1 3/4" Door $44.14 82-3209 LE, KE (1,2,3,4), CE, TE Esc. - 1 3/4" Door $44.97 82-3210 L Rose, WT Esc. - 1 3/4" Door $45.64 82-3214 LS, KS - 1 3/4" Door $42.49 8200 Outside Trim KitPart # Description

82-3876 CE, KS, LE (1-4), TE, LS - 1 3/4" Door $21.05 82-3877 CE, KS, LE (1-4), TE, LS - 2" Door $25.56 82-3878 CE, KS, LE (1-4), TE, LS - 2 1/4" Door $28.58 82-3879 CR, TR, LN, LW1, O - 1 3/4" Door $21.05 82-3880 CR, TR, LN, LW1, O - 2" Door $25.56 82-3881 CR, TR, LN, LW1, O - 2 1/4" Door $28.58 82-3882 L, WT - 1 3/4" Door $21.05 82-3883 L, WT - 2" Door $25.56 82-3884 L, WT - 2 1/4" Door $28.58 8200 Complete Trim KitPart # Description

82-3885 CE, KS, LE (1-4), TE, LS - 1 3/4" Door $61.62 82-3886 CE, KS, LE (1-4), TE, LS - 2" Door $66.13 82-3887 CE, KS, LE (1-4), TE, LS - 2 1/4" Door $78.17 82-3888 CR, TR, LN, LW1, O - 1 3/4" Door $61.62 82-3889 CR, TR, LN, LW1, O - 2" Door $66.13 82-3890 CR, TR, LN, LW1, O - 2 1/4" Door $78.17 82-3891 L, WT - 1 3/4" Door $61.62 82-3892 L, WT - 2" Door $66.13 82-3893 L, WT - 2 1/4" Door $78.17 8200 10 Pack - Complete Trim KitPart # Description

82-3894 CE, KS, LE (1-4), TE, LS - 1 3/4" Door $616.30 82-3895 CE, KS, LE (1-4), TE, LS - 2" Door $661.41 82-3896 CE, KS, LE (1-4), TE, LS - 2 1/4" Door $781.65 82-3897 CR, TR, LN, LW1, O - 1 3/4" Door $616.30 82-3898 CR, TR, LN, LW1, O - 2" Door $661.41 82-3899 CR, TR, LN, LW1, O - 2 1/4" Door $781.65 82-3900 L, WT - 1 3/4" Door $616.30 82-3901 L, WT - 2" Door $661.41 82-3902 L, WT - 2 1/4" Door $781.65 8200 Metro Elements Inside trim Kit (04, 05, 15, 16, 17, 24, 25, 26, 37, 43, 45, 50, 65, 66, 70, 71, 72, 83, 85, 86, 94 functions)Part # Rose/Eschutcheon Description

79-2162 O,CO,CR,LN,TO,TR Roses and LW1, WT Escutcheons $22.03

8200 Metro Elements One Side Trim Kit (06,13,31,35,36,91,92,95 functions)Part # Rose/Eschutcheon Description

79-2161 O,CO,CR,LN,TO,TR Roses and LW1, WT Escutcheons $33.10 79-2159 O,CO,CR,LN,TO,TR (93 function only) $22.95 79-2160 O,CO,CR,LN,TO,TR (94 function only) $23.20


ML-67MORTISE LOCKS

8200 STRIKES & RABBETED KITS8100 SPINDLES


8100 Spindle Kits (Ball & Socket)Kit Number Rose/Esc. Design Door Thickness Price

Spindle Kits for 8100’s mfg. prior to 1/1/90

578-1 LN, LE, LW 1-3/8" $29.00 578-2 LN, LE, LW 1-3/4" $29.00 578-3 LN, LE, LW 2-1/4" $29.00

Spindle Kits for 30-8100 mfg. after 1/1/90

579-1 LN, LE, LW 1-3/8" $29.00 579-2 LN, LE, LW 1-3/4" $29.00 579-3 LN, LE, LW 2-1/4" $29.00

Kit includes: Pre-drilled spindle assembly, 2 grub screws, 2 bushings, spiral pin, spindle cavity template.Please specify door thickness, rose or escutcheon and lever or knob design.

8100 Thru-Bolt Spindles Price

10-0195 Inside Spring, Outside Spring $0.69 81-0618 For 1-3/8" Door – Inside/Outside Spindle $27.33 81-0524 For 1-3/4" Door – Inside/Outside Spindle $27.33 81-0619 For 2-1/4" Door – Inside/Outside Spindle $27.33

each

each

StrikesPart #

77-1141 Wrought Box (Steel) ord'rd w/locks N/A77-1141 Wrought Box (Steel) ordered separately $3.50 78-0034 Deadlock Strike - No Lip $12.99 82-0229 Straight Lip Strike - 7/8" Lip $12.99 82-0109 Curved Lip Strike - 1 1/8" $12.99 82-0110 Curved Lip Strike 1 1/4" Lip Length-Standard $12.99 82-0111 Curved Lip Strike 1 3/8" Lip Length $12.99 82-0112 Curved Lip Strike 1 5/8" Lip Length $12.99 82-0113 Curved Lip Strike 1 7/8" Lip Length $12.99 82-0114 Curved Lip Strike 2 1/8" Lip Length $12.99 82-0115 Curved Lip Strike 2 3/8" Lip Length $12.99 82-0116 Curved Lip Strike 2 5/8" Lip Length $12.99 82-0117 Curved Lip Strike 2 7/8" Lip Length $12.99

Open Back StrikesPart #

82-0332 RHRB - 1 3/4" Dr Thickness $75.16 82-0333 LHRB - 1 3/4" Dr Thickness $75.16 82-0334 RHRB - 2" Dr Thickness $81.99 82-0335 LHRB - 2" Dr Thickness $81.99 82-0336 RHRB - 2 1/4" Dr Thickness $88.82 82-0337 LHRB - 2 1/4" Dr Thickness $88.82 82-0338 RHRB - 2 1/2" Dr Thickness $95.66 82-0339 LHRB - 2 1/2" Dr Thickness $95.66 82-0340 RHRB - 2 3/4" Dr Thickness $102.49 82-0341 LHRB - 2 3/4" Dr Thickness $102.49 82-0342 RHRB - 3" Dr Thickness $109.32 82-0343 LHRB - 3" Dr Thickness $109.32 Note: Lock must be centered in door.

7800-8200 - Rabbeted Front Kit - Function required when orderingPart # Design 4, 26D 3, 9, 10, 10B 26 10BL, 20D

677 for 1 3/4" to 2" Doors $150.00 $165.00 $179.00 2-677 for 2 1/4" Doors $150.00 $165.00 $179.00


ML-68MORTISE LOCKS

8200/7800 PARTSApril 15, 2008 | Minimum Order $250

01-0010 PT-Trim Retaining Ring $0.7001-0079 Washer/Shim - Inside & Outside $0.7001-0203 Retaining Ring (for deadbolt & assy.) $0.7001-0972 PT-Trim Cotter Pin $1.76

*01-1019 12-24 x 1/2 PH Screw (for strikes) $0.59*01-1028 8-32 x 1/4 PH Screw (for O/S fronts) $0.6001-1071 Mounting Screws for 130/184 KA, KB,

KC, KT, LB, LC, LT (MS) $0.97*01-1119 Machine Screw #8-82 x 1 1/2" PH HD $1.16*01-1154 Screw for 130/184 KA, KB, KC, KT, LB,

LC, LT (#6-32 x 1/4") $1.0201-1161 Set Screw $0.7301-1174 Lever/Knob Screw for B/J/L/P/W/C/G/

R/S/Y Lever-B/C Knob $2.25*01-1257 #8-32 x 3/4 CS FL Spanner $6.76*01-1261 #6-32 x 5/16 FT MS Spanner $4.65*01-1262 6-32 x 1/4 FT MS Spanner $4.65*01-1272 6-32 x 3/8 FL MS Spanner $3.42*01-1273 8-32 x 1/4 FL MS Spanner $3.33*01-1282 12-24 x 1/2 FL MS Spanner $3.43*01-1283 #12 x 1" FT WS Spanner $4.30*01-1285 1/4-20 x 1 3/4 MS Spanner $6.02*01-1290 1/4-20 x 2" MS Spanner $6.18*01-1362 #8-32 x 3/4 CS Flt Torx $2.60*01-1366 #6-32 x 5/16 FT MS Torx $3.27*01-1367 #6-32 x 1/4 FT MS Torx $3.56*01-1377 PT-Trim Torx Screw $5.12*01-1378 #8-32 x 1/4 FTMS Torx $4.84*01-1387 #12-24 x 1/2 FTMS Torx $3.42*01-1388 #12 x 1 FT wood screw $5.69*01-1390 1/4 - 20 x 1 1/4 MS Flt Torx $5.47*01-1395 1/4 - 20 x 2 MS Flt Torx $5.73*01-1472 Lever/Knob Screw for A/E/F Lever $2.2501-1489 FW-Trim Screw & Washer - #10-32 5/16" $0.7101-1491 6 x 3/8" wood screw $0.1401-1495 Thru-bolt Screws – All Trims $0.70

*01-2034 6 x 3/8" PH wood screw $0.70*01-2035 6 x 1/2" PH wood screw $0.70*01-2037 6 x 3/4" PH wood screw $1.3101-2217 Mounting Screws for 130/184 W (WS) $1.02

*01-2298 #12 x 1 1/4" wood screw (for strike) $0.5401-2299 #12 x 1 1/4" wood screw (for lockbody) $0.28

*01-3151 Screw for 130/184 W (#6-32 x 5/16") $0.9601-3157 6-32 x 3/4" PH M.S. $0.96

*01-3457 1/4 - 20 x 2 PH $0.97

01-4370 Screw for 130/184 KA, KB, KC, KT, LB, LC, LT (#6-32 x 5/16") $0.30

01-4376 Screw for hold cable clamp $0.4701-4402 8-32 x 5/16" Machine Screw $0.41*01-4405 Lever/Knob Screw – Torx – A/E/F $3.4301-4457 FW-Trim Cap Screw #10-32 x 3/8" (hex hd) $3.9701-4510 PT-Trim Truss Head M.S. 12-24 x 1/4" $1.7601-4511 Flt. Hd. Mach Screw 12-24 x 1-7/8" $1.7601-4532 Self Tapping Screw $0.68

*01-5000 Machine Screw (LE2, LE4 Esc.) $0.6801-9180 Catch Screw $0.1806-0183 Escutcheon spring clip $16.2306-0216 Sitker (escutcheon clip) $0.4314-0057 Emergency Key (65 function) $1.2152-2647 Switch & Bracket Assy (LX) $107.87

*77-0168 Machine Screw (LE1 Esc.) $1.3177-0258 Neoprene Washer $0.2277-0734 Bushing Locator $3.0777-1069 Aligner Wrench $0.8877-1467 8-32 x 2" PH Screw $1.7477-2744 Esc. Screw Pk LE/KE (2,4) Trim One Side $6.13

*77-3467 Esc. Screw Pk LE/KE (2,4) 1 3/8" Door $7.88*77-3468 Esc. Screw Pk LE/KE (2,4) 1 3/4" Door $9.48*77-3469 Esc. Screw Pk LE/KE (2,4) 2" Door $10.43*77-3470 Esc. Screw Pk LE/KE (2,4) 2 1/4" Door $16.49*77-4158 Esc. Screw Pk LE/KE(1,3), LW1/KW1,

CE, TE - Trim One Side $3.66*77-4230 Cyl. Ret. Cap Pack $49.59*77-4236 Standard Screw Pack for Strike,

Front & Lockbody $4.52*77-4251 Esc. Screw Pk LS - 1 3/4" Door $18.0978-0007 Latch Lever (7800 only) $9.0678-0008 Non-handed Hub (7800 only) $14.8878-0009 Hub Spacer (7800 only) $2.2078-0014 Retaining Nut only (for Rose Trim) $6.1378-0140 T-Handle Hub Spacer $14.8878-0286 Spacer Stop $2.0478-0292 Retaining Nut only (for WT Trim) $12.84

*78-0293 PT-Trim Cover $51.9678-0294 PT-Trim Push Side Adapter Plate $38.2478-0295 PT-Trim Lock Nut $17.3878-0296 PT-Trim Pull Side Adapter Plate $38.2478-0297 PT-Trim Mounting Bracket $104.04

*78-0298 PT-Trim Push Lever $208.1178-0299 PT-Trim Spring $20.87

*Specify finish required.

Part No. Price Part No. Price



ML-69MORTISE LOCKS

8200/7800 PARTS

*78-0300 PT-Trim Handle Shaft $10.43*78-0301 PT-Trim Pull Lever $208.1178-0302 PT-Trim Conical Spring $20.8778-0303 PT-Trim Spiral Pin $1.7678-0304 PT-Trim Spindle $17.3878-0305 PT-Trim Washer $1.7678-2749 Rose Nut & Wrench Pack (Rose Trim) $10.0878-2805 PT-Trim Cam Assy $51.96

*78-2806 PT-Trim Push Handle Chas. Asy (w/o cvr) $303.41*78-2807 PT-Trim Pull Handle Chas. Asy (w/o cvr) $303.4178-2808 PT-Trim Screw Pack (4 screws) $6.85

*81-0067 FW-Trim Washer (disk) 04,17,31,50,70, 73 only $8.48

81-0641 Thrubolts - specify door thickness when ordering $3.42

81-0723 Thrubolt Posts (1 3/4" Door) $1.54*81-2262 Plug Assy for 93 & 94 function $52.6181-4180 Deadbolt asy $32.2081-4270 Lever Adpt & Screw pk (E,L) $10.2581-4443 Adapter & Plate Assy (LN) $10.39

*82-0009 3P-8225 O/S Front $111.4582-0017 Mntg Post - 1 3/8" Door $2.60

*82-0080 O/S Front (15, 65) $38.95*82-0081 O/S Front (04, 05, 06, 13, 16, 17, 31,

36, 37, 38, 56, 67) $38.95*82-0082 O/S Front (03, 20, 21, 22, 23, 28, 29, 30) $38.95*82-0083 O/S Front (24, 25, 26, 27, 35, 39, 66, 68) $38.95*82-0084 O/S Front (50, 40, 41, 51, 52) $38.95*82-0085 O/S Front (55) $38.95*82-0086 O/S Front (45, 46, 47, 48) $38.95*82-0087 O/S Front (43) $38.95*82-0088 O/S Front (89, 90, 91, 92) $38.9582-0101 Toggle Button (05, 43, 45, 85) $11.2882-0102 Toggle Spring (05, 43, 45, 85) $1.2382-0103 Guard Lever Arm $5.7382-0120 Hub (spacer) $2.0682-0123 Hub (cap 92 function) $56.1682-0124 Hub (case 92 function) $56.1682-0127 Spacer 1/2" (04, 05, 06, 16, 17, 91, 92) $0.7082-0128 Spacer 7/16" (41, 43, 45, 50) $0.7082-0132 Auto Lock Lever $3.7482-0133 Auto Retract Lever $3.7482-0138 Guard Lever Spring (all functions) $1.2382-0139 Cylinder Latch Lever (04, 06, 16, 37, 31) $7.7882-0144 Deadbolt Spring (03, 20, 21, 22, 23, 24) $3.9782-0149 Hub Core (for thumbturn) $10.5482-0160 Cyl. Latch Lever $3.42

82-0161 Spring (classroom) $6.7682-0163 Anti-Vandal Hub $2.4682-0168 Classroom Hub (for thumbturn) $12.4482-0170 Washer $1.6582-0171 Plastic Spacer $0.8382-0184 Retaining Nut/Cap Nut - Outside $5.7482-0202 FW-Trim Adapter Only - I/S Lever $12.4482-0203 FW-Trim Adapter Only - I/S Knob $12.4482-0208 Lead Lining (lockbody sleeve) $405.8782-0211 Locking Piece Jamb (04, 17, 31, 50) $5.8882-0212 Toggle Button Washer - 2 per lock $0.96

*82-0235 1-Prefix O/S Front (15, 65) $38.95*82-0236 1-Prefix O/S Front (04, 05, 06, 13, 16,

17, 31, 36, 37, 38, 56, 67,) $38.95*82-0237 1-Prefix O/S Front (03, 20, 21, 22, 23,

28, 29, 30) $38.95*82-0238 1-Prefix O/S Front (24, 25, 26, 27, 35,

39, 66, 68) $38.95*82-0239 1-Prefix O/S Front (40, 41, 50, 51, 52, 97) $38.95*82-0240 1-Prefix O/S Front (55) $38.95*82-0241 1-Prefix O/S Front (45, 46, 47, 48) $38.95*82-0242 1-Prefix O/S Front (43) $38.9582-0251 Washer $0.8382-0347 Lever Spring (put into lever handle)' $0.7082-0367 Spindle for 1-3/8" dr. $7.5382-0368 Spindle for 1-3/4" dr(stndrd) $7.5382-0369 Spindle for 2-1/8" dr. $8.0782-0370 Spindle for 2-1/2" dr. $8.0782-0392 Spring Guide (for guard bolt) $0.9682-0393 Spring (for guard bolt) $1.3682-0396 Spindle for 93 function - 1-3/4"-2" dr. $7.6582-0397 STR.Spindle (2-1/8-2 - 3/8") $7.6582-0399 Spindle for 94 function - 1-3/4"-2" dr. $7.6582-0406 Half Cable Clamp (70, 71, 72, 73) $0.7582-0408 Cylinder Latch Lever $0.7082-0421 Hub (case - 8200) $13.9682-0422 Hub (cap - 8200) $13.9682-0454 FW-Trim Spacer $0.4882-0455 FW-Trim Mounting Plate $27.6082-0456 FW-Trim Thrubolt Stud - (1-3/8" Door) $15.1682-0457 FW-Trim Bushing Insert $5.88

*82-0458 FW-Trim O/S Esc. Only-All functions exc. 65,66 $165.64

82-0459 FW-Trim Spindle Stud - O/S (04,17,31,50, 71,13) $5.04

82-0509 Deadbolt Spring (8285) $18.0482-0539 Mntg Post - 2 1/4" Door $4.23



ML-70MORTISE LOCKS

8200/7800 PARTSApril 15, 2008 | Minimum Order $250

82-0541 Spring Bracket $11.2882-0542 Friction Disc $9.7782-0549 O/S Front (40, 41, 50, 51, 76, 77) $38.95

*82-0578 O/S Front (70, 71, 72, 73) $38.95*82-0587 1- O/S Front (89, 90, 91, 92) $38.95*82-0588 1- O/S Front (70, 71, 72, 73) $38.9582-0612 Rose Wave Spring $0.6882-0627 O/S Front (95, 96, 97) $26.5482-0633 LB Tail Clip (65) $1.2982-0691 Outside bushing $10.1682-0695 Lever locking set screw $5.1682-2004 Spring Cartridge Assembly (8200) $14.0982-2029 Guardbolt Assembly - guarded function $5.8882-2121 Fire Stop Assembly - all functions $11.9082-2122 Cylinder Retainer Assy. (cyl. functions) $6.9782-3082 Mntg Plate - LN, E, O, CR, TR Rose;

LW1, KW1 Esc. $7.5382-3085 Mntg Plate - LE/KE(1-4), CE, TE, LS,

KS Esc. $7.5382-3088 I/S Plate & Adapter-LN, O, E

- Rose/LW1 Esc. $20.5082-3089 I/S Plate & Adapter-L Rose/WT Esc. $28.9882-3090 I/S Plate & Adapter-LE/KW(1,2,3,4),

CE, TE, LS Esc. $39.2282-3092 Locking Piece Assy. Lock One Lever $8.8882-3093 Locking Piece Assy. Lock Both Levers $7.7982-3217 Mntg Plate - L Rose, WT Esc. $7.5382-3341 Esc. Screw Pk LE/KE(1,3), LW1/KW1,

CE1, TE1 - 1 3/4" Door $19.5482-3615 Locking Piece (70, 71) $17.8982-3617 RX Switch $150.3282-3618 Locking Piece (72, 73) $20.2982-3645 68/69 -8200 spring ctg asy $8.7682-3654 Esc. Screw Pk WT - Wood/Metal Door $5.8882-3655 Latch Assembly $62.5982-3657 Anti-Vandal Hub Pack $16.1282-3662 Interlocking Assy. $89.7882-3663 FW-Interlocking Assy (37 function) $89.7882-3664 FW-Interlocking Assy (65,66 functions) $89.7882-3670 Spindle & Locking Hub $40.0582-3671 FW-Spindle (split) Assy - 37 function $40.0582-3672 FW-Spindle (split) Assy - 65,66 function $40.0582-3675 Escutcheon Screws 1/4-20 x 1 3/4" $1.6582-3676 Escutcheon Screws 1/4-20 x 2" $2.25

*82-3677 FW-O/S Esc. Only- 65,66 functions $235.4582-3690 Esc. Screw Pack LE/KE(1,3), LW1/KW1,

CE1, TE1 - 1 3/8" Door $17.89


*Specify finish required.

82-3691 Esc. Screw Pk LE/KE(1,3), LW1/KW1, CE1, TE1 - 2" Door $20.29

82-3692 Esc. Screw Pk LE/KE(1,3), LW1/KW1, CE1, TE1 - 2 1/4" Door $25.97

82-3693 Esc. Screw Pk LS - 2" Door $18.5882-3694 Esc. Screw Pk LS - 2 1/4" Door $24.2082-3736 3P-Fix Device $119.4182-3743 3P Lockbody $492.04

*82-4022 Thru Bolt Blank Dummy Plate Assy - 1 3/8" Dr. $35.28


*82-4024 Thru Bolt Blank Dummy Plate Assy - 2" Dr. $38.58


82-4032 Deadbolt Assy. $38.2682-4051 VAC/OCC Slide asy $10.3182-4052 Thumb turn screw pack -for all thumb

turn designs (includes: mountig plate, mounting screws (2), and finish screw. $6.48

82-4248 Adaptor plate & post asy $9.0182-4269 3P Lockbody $492.0482-4576 Outside adapter & plate assembly for

CO, CR, LN, O, TO, TR $3.7482-4577 Inside adapter & plate assembly or

CO, CR, LN, O, TO, TR $13.6882-4595 Outside adapter & plate assembly for

CE, LE1, TE escutcheons $3.7482-4596 Inside adapter & plate assembly for

CE, LE1, TE escutcheons $13.6797-0478 FW-Lower Plate $3.74


ML-71MORTISE LOCKS

7900 GENERAL INFORMATION April 15, 2008 | Minimum Order $250

15 F01 US3 605 Polished brass, clear coated55 F04 US4 606 Satin brass, clear coated37 F05 US9 611 Polished bronze, clear coated04 F07 US10 612 Satin Bronze, clear coated16 F09 US10B 613 Oxidized Satin Bronze/Oil Rubbed45 F12 US10BL --- Oxidized Satin Bronze, clear coated25 F13 US15 619 Satin nickel, clear coated26 F14 US14 618 Bright nickel, clear coated50 F15 US20D --- Statuary dark bronze, clear coated66 F19 US26 625 Polished chrome43 F20 US26D 626 Satin chrome24 F21 US32 629 Polished stainless steel65 F22 US32D 630 Satin stainless steel38 F32


Function

SARGENT ANSI

How to Order




Product Series 7900 Levers and Knobs 10 Ea. 75-79

Function Consult catalog for functions available 10 Ea. 75-7955

Trim Consult catalog for trims available 10 Ea. 75-7955 OBL

Finish Consult catalog for finishes available 10 Ea. 75-7955 OBL US26D

Hand Consult catalog for handing requirements 10 Ea. 75-7955 OBL US26D RH

Options Consult factory for options available 10 Ea. 75-7955 OBL US26D RH x 1 3⁄8" Lip Strike

When ordering split finishes specify outside finish first 10 Ea. 75-7955 OBL US3 x US26D RH

To price split trim/finish, defaults to higher price.Locksets in combinations not listed should be figured by adding together the prices of the component parts.If by any method of figuring, lower prices can be obtained than set prices shown, set prices will prevail.It is not permissible to take full deduction for omission of a component from a lockset.Prices are for 1-3/4" door. For other door thicknesses not listed herein, please consult factory.

Finish



ML-72MORTISE LOCKS


PrefixNumber Description Price1s 7900 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.31 Thick Doors - Extended Lip Required - Specify Length C to E

Doors up to 2-1/4" thick - lock centered. Over 2-1/4" – Please consult factory. No addition If paneled, specify size and location. Non-Keyed function Add $44.00 Example:1-3/4" thick w/max 1" paneling (Specify inside or outside) Keyed function Add $87.00 - Cylinders - IMPORTANT- See catalog 7900 prefix page for cylinder limitations- Charges DO NOT include additional charges for special cylinder requirements

36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.68 7900 Line furnished with lever handle outside x knob inside Defaults to 7900 Lever Lock Price 69 7900 Line furnished with lever handle inside x knob outside Defaults to 7900 Lever Lock Price 70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl75 Milled inside lever Add $56.00 76 Milled outside lever Add $56.00 77 Milled both levers Add $112.00 F182s† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.81s† Cylinder to accept Keso (83) and Keso F1(F183) Removable Core – no core provided No addition 82s† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.LB Extra large thumbturn Add $8.00 RX Request to Enter/Exit (not available w/1, 50, 74 prefixes) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section

s Prefixes not available with a standard 50 function lockout cylinder.† Not available with 60, 63, 64 prefixes

SuffixCPC 7904 x OBL x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-73MORTISE LOCKS


Rose: O (Shown) Levers: BL, BB, BP, BJ (Shown)

4/26D 10/10B 3/26 32D 32

$479.00 $490.00 $494.00 $506.00 $518.00

$492.00 $501.00 $506.00 $519.00 $530.00

$532.00 $543.00 $547.00 $560.00 $571.00

$529.00 $539.00 $544.00 $556.00 $568.00

$538.00 $548.00 $553.00 $566.00 $576.00

$665.00 $675.00 $679.00 $692.00 $703.00

$714.00 $725.00 $729.00 $742.00 $753.00

$373.00 $384.00 $388.00 $401.00 $412.00$434.00 $444.00 $448.00 $461.00 $472.00$457.00 $466.00 $471.00 $484.00 $495.00$154.00 $159.00 $161.00 $167.00 $174.00$308.00 $317.00 $323.00 $335.00 $346.00$209.00 $214.00 $216.00 $223.00 $228.00

Single Cyl7904 Storeroom or Closet7937 Classroom7955 Office or EntrySingle Cyl With Deadbolt7924 Room Door7925 Dormitory or Exit7943 Apartment Corridor7945 Dormitory or Exit7950 Hotel Guest LockDouble Cyl No Deadbolt7916 Apartment or Exit or Public Toilet7938 Classroom Security IntruderDouble Cyl With Deadbolt7926 Store DoorElectro Mechanical Single Cyl – Specify 12V or 24V7970-12V / 7970-24V Fail Safe7971-12V / 7971-24V Fail SecureElectro Mechanical Double Cyl – Specify 12V or 24V7972-12V / 7972-24V Fail Safe7973-12V / 7973-24V Fail SecureNon Keyed7915 Passage or Closet7965 Privacy Bedroom or Bath (Latch)7966 Privacy Bedroom or Bath (Deadbolt)7993 Single Dummy Trim7994 Double Dummy Trim7995 Single Dummy Trim w/Lockbody

Function Finish

OBL Lever OBB Lever OBP Lever OBJ Lever


ML-74MORTISE LOCKS






SuffixCPC 7904 x LW1BL x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-75MORTISE LOCKS


Escutcheon: LW1 (Shown) Levers: BL, BB, BP, BJ (Shown)

4/26D 10/10B 3/26 32D 32

$503.00 $515.00 $519.00 $531.00 $543.00

$515.00 $525.00 $529.00 $541.00 $553.00

$560.00 $570.00 $574.00 $588.00 $599.00

$555.00 $566.00 $570.00 $582.00 $594.00

$565.00 $574.00 $579.00 $592.00 $603.00

$688.00 $700.00 $704.00 $717.00 $728.00

$738.00 $750.00 $754.00 $766.00 $778.00

$392.00 $404.00 $408.00 $420.00 $431.00$454.00 $464.00 $469.00 $482.00 $493.00$477.00 $488.00 $492.00 $503.00 $516.00$161.00 $166.00 $168.00 $176.00 $181.00$323.00 $333.00 $337.00 $349.00 $362.00$216.00 $222.00 $224.00 $229.00 $235.00


Function Finish

LW1BL Lever LW1BB Lever LW1BP Lever LW1BJ Lever


ML-76MORTISE LOCKS






SuffixCPC 7904 x WTBL x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-77MORTISE LOCKS


WTBL Lever WTBB Lever WTBP Lever WTBJ Lever

Escutcheon: WT (Shown) Levers: BL, BB, BP, BJ (Shown)

4/26D 10/10B 3/26 32D 32

$494.00 $503.00 $509.00 $521.00 $532.00

$503.00 $515.00 $519.00 $531.00 $543.00

$550.00 $560.00 $565.00 $576.00 $589.00

$545.00 $555.00 $560.00 $572.00 $583.00

$554.00 $565.00 $569.00 $581.00 $593.00

$679.00 $688.00 $694.00 $706.00 $718.00

$729.00 $738.00 $744.00 $756.00 $768.00

$383.00 $392.00 $398.00 $410.00 $421.00$444.00 $454.00 $459.00 $471.00 $483.00$466.00 $477.00 $482.00 $494.00 $504.00$157.00 $162.00 $164.00 $171.00 $177.00$313.00 $324.00 $329.00 $341.00 $352.00$212.00 $217.00 $219.00 $225.00 $231.00


Function Finish


ML-78MORTISE LOCKS




60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cylF182s† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.81s† Cylinder to accept Keso (83) and Keso F1(F183) Removable Core – no core provided No addition 82s† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.RX Request to Enter/Exit (not available w/1, 50, 74 prefixes) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section


SuffixCPC 7904 x OMC x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-79MORTISE LOCKS

7900 SERIES — STUDIO COLLECTIONMETRO ELEMENTS


14/15/26/26D 3/4/9/10/10B 10BL/20D/32/32D

$502.00 $514.00 $518.00

$516.00 $526.00 $530.00

$556.00 $567.00 $571.00

$553.00 $564.00 $568.00

$563.00 $572.00 $576.00

$687.00 $699.00 $703.00

$737.00 $749.00 $753.00

$398.00 $408.00 $412.00$458.00 $467.00 $472.00$480.00 $491.00 $495.00$165.00 $172.00 $174.00$332.00 $342.00 $346.00$220.00 $226.00 $228.00


Function Finish

Rose Design: Lever Series Designs: How to order: 60-7904 x CRMM x RH x 26DCO (2-3/4") Centro Notting Hill Aventura Rialto Odeon Prefix 60CR (2-3/16") MC *MQ MA MO *MN Function 7904LN (2") MD MR MB *ML *MH Rose CRO (2-3/4") MJ *MT ME *MK Lever MMTO (2-3/4") MP *MM MF *MS Hand RHTR (2-3/16") MG *MU Finish 26D

MI *MVMW

* Handed: specify hand when ordering


ML-80MORTISE LOCKS




60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cylF182s† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.81s† Cylinder to accept Keso (83) and Keso F1(F183) Removable Core – no core provided No addition 82s† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.RX Request to Enter/Exit (not available w/1, 50, 74 prefixes) Add $98.00 SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section


SuffixCPC 7904 x LW1MC x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-81MORTISE LOCKS

7900 SERIES — STUDIO COLLECTIONMETRO ELEMENTS


14/15/26/26D 3/4/9/10/10B 10BL/20D/32/32D

$531.00 $541.00 $546.00

$541.00 $552.00 $556.00

$588.00 $598.00 $602.00

$582.00 $593.00 $598.00

$592.00 $602.00 $606.00

$717.00 $726.00 $731.00

$766.00 $776.00 $781.00

$420.00 $430.00 $435.00$482.00 $492.00 $496.00$503.00 $515.00 $519.00$176.00 $181.00 $183.00$349.00 $361.00 $365.00$229.00 $235.00 $237.00


Function Finish

Escutcheon Design: Lever Series Designs: How to order: 60-7904 x CEMM x RH x 26DCE Centro Notting Hill Aventura Rialto Odeon Prefix 60TE MC *MQ MA MO *MN Function 7904LE1 MD MR MB *ML *MH Escutcheon CE

MJ *MT ME *MK Lever MMMP *MM MF *MS Hand RH

MG *MU Finish 26DMI *MVMW



ML-82MORTISE LOCKS




36 6 Lobe security head screws Add $19.00 37 Spanner head screws Add $12.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master & grand master keying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573s† Small Format 6-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.65737Ps† Small Format 7-pin uncombinated core (refer to CK-11 for available keyways) Add $31.00 / cyl.70s† Small Format Interchangeable disposable plastic construction core No addition 72s† Small Format Interchangeable 6-pin construction core (7-pin with 11 prefix) See CK-2 73s† Small Format 6-pin interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl737Ps† Small Format Interchangeable core (refer to CK-11 for available keyways) Add $40.00 / cyl75 Knurled inside knob Add $56.00 76 Knurled outside knob Add $56.00 77 Knurled both knobs Add $112.00 F182s† SARGENT Keso Security Cylinder – patented – new key systems Add $47.00 / cyl.F183s† SARGENT Keso Security Removable Core Cylinder – patented – new key systems Add $67.00 / cyl.81s† Cylinder to accept Keso (83) and Keso F1(F183) Removable Core – no core provided No addition 82s† SARGENT Keso Security Cylinder (For existing systems only) Add $47.00 / cyl.83s† SARGENT Keso Security Removable Core Cylinder (For existing systems only) Add $67.00 / cyl.84s† SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.SCs† Schlage “C” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition SEs† Schlage “E” Keyway cylinder, (Number 41 Cylinder Only, 0 bitted) No addition VA, VC, VS, VCVSs† – SARGENT V-10 Standard Cylinder See V-10 Cylinder Section


SuffixCPC 67-7904 x OB x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-83MORTISE LOCKS


Rose: O (Shown) Knob: B (Shown)

4/26D 10/10B 3/26 32D 32

$422.00 $433.00 $437.00 $449.00 $460.00

$433.00 $443.00 $446.00 $460.00 $470.00

$478.00 $489.00 $492.00 $504.00 $516.00

$476.00 $486.00 $490.00 $502.00 $514.00

$485.00 $495.00 $498.00 $513.00 $522.00

$291.00 $301.00 $305.00 $317.00 $329.00$369.00 $380.00 $383.00 $396.00 $407.00$391.00 $402.00 $406.00 $419.00 $428.00$113.00 $118.00 $121.00 $127.00 $131.00$226.00 $236.00 $239.00 $254.00 $263.00$167.00 $173.00 $176.00 $182.00 $186.00

Single Cyl67-7904 Storeroom or Closet67-7937 Classroom67-7955 Office or EntrySingle Cyl With Deadbolt67-7924 Room Door67-7925 Dormitory or Exit67-7943 Apartment Corridor67-7945 Dormitory or Exit67-7950 Hotel Guest LockDouble Cyl No Deadbolt67-7916 Apartment or Exit or Public Toilet67-7938 Classroom Security IntruderDouble Cyl With Deadbolt67-7926 Store DoorNon Keyed67-7915 Passage or Closet67-7965 Privacy Bedroom or Bath (Latch)67-7966 Privacy Bedroom or Bath (Deadbolt)67-7993 Single Dummy Trim67-7994 Double Dummy Trim67-7995 Single Dummy Trim w/Lockbody

Function Finish

OB


ML-84MORTISE LOCKS






SuffixCPC 67-7904 x LW1B x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-85MORTISE LOCKS


Escutcheon: KW1 (Shown) Rose: B (Shown)

4/26D 10/10B 3/26 32D 32

$433.00 $443.00 $446.00 $460.00 $470.00

$440.00 $449.00 $453.00 $466.00 $477.00

$490.00 $499.00 $502.00 $517.00 $527.00

$485.00 $495.00 $498.00 $513.00 $522.00

$494.00 $503.00 $508.00 $521.00 $531.00

$300.00 $310.00 $313.00 $328.00 $337.00$381.00 $390.00 $393.00 $408.00 $418.00$404.00 $414.00 $417.00 $430.00 $441.00$118.00 $123.00 $125.00 $131.00 $136.00$235.00 $244.00 $250.00 $262.00 $272.00$173.00 $178.00 $180.00 $186.00 $190.00


Function Finish

KW1B


ML-86MORTISE LOCKS


PrefixNumber Description Price1s 7900 Line with 1-1/16" wide front for 1-3/8" doors. Add $52.00 10s SARGENT Signature Key System Add $34.00 / cyl.10ULs SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11†s SARGENT XC Key System (not available w/10, 10UL, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.31 Thick Doors - Extended Lip Required - Specify Length C to E




SuffixCPC 67-7904 x WTB x RH x 32D x CPC (Clear Powder Coat) Add $31.00



ML-87MORTISE LOCKS


Escutcheon: WT (Shown) Rose: B (Shown)

4/26D 10/10B 3/26 32D 32

$427.00 $439.00 $442.00 $456.00 $465.00

$435.00 $445.00 $448.00 $462.00 $472.00

$485.00 $495.00 $498.00 $513.00 $522.00

$480.00 $491.00 $494.00 $508.00 $518.00

$490.00 $499.00 $502.00 $517.00 $527.00

$295.00 $306.00 $309.00 $323.00 $333.00$375.00 $386.00 $389.00 $404.00 $414.00$399.00 $409.00 $412.00 $425.00 $437.00$115.00 $121.00 $123.00 $129.00 $134.00$231.00 $240.00 $243.00 $258.00 $268.00$171.00 $176.00 $178.00 $184.00 $188.00


Function Finish

WTB


ML-88MORTISE LOCKS

Minimum Order $250

Blank Page


ML-89MORTISE LOCKS

GENERAL INFORMATION9200 HIGH SECURITY MORTISE

M9200 HIGH SECURITY MORTISEApril 15, 2008 | Minimum Order $250


Function

SARGENT ANSI A.S.T.M. #

15 F01 401

05, 55 F04 404

37 F05 405

04 F07 407

16 F09 409

45 F12

25 F13 413MOD.

26 F14 414-2

50 F15MOD.

22 F16 416

21 F17 417

20 F18 418

66 F19

24 F21 421MOD.

43 F20

65 F22 419MOD.

03 F29

17 F30 433-2

38 F32

39 F33

40 F34

How to Order



Prefix Consult catalog for prefixes available 10 Ea. 3-M-

Product Series 9200 Levers 10 Ea. 3-M-92

Function Consult catalog for functions available 10 Ea. 3-M-9205

Trim Consult catalog for trims available 10 Ea. 3-M-9205 SNJ

Finish Consult catalog for finishes available 10 Ea. 3-M-9205 SNJ US26D

Hand Consult catalog for handing requirements 10 Ea. 3-M-9205 SNJ US26D RH

Options Consult factory for options available 10 Ea. 3-M-9205SNJ US26D RH x 1-3/8" LIP STRIKE

When ordering split finishes specify outside finish first 10 Ea. 3-M-9205 SNJ US3 x US26D RH

To price split trim/finish, add the price of each trim/finish and divide by two (2).

Locksets in combinations not listed should be figured by adding together the prices of the component parts.

If by any method of figuring, lower prices can be obtained than set prices shown, set prices will prevail.

It is not permissible to take full deduction for omission of a component from a lockset.

Prices are for 1 3/4" door. For other door thicknesses not listed herein, please consult factory.

Finish


US4 606 Satin Brass, Clear Coated


US32D 630 Satin Stainless Steel



ML-90MORTISE LOCKS

PREFIXES-9200

PrefixNumber Description Price3 Stainless Steel Hubs Add $55.00 10s SARGENT Signature Key Systems Add $34.00 / cyl.10ULs SARGENT Signature Cylinders Meeting UL437 Add $48.00 / cyl.11† SARGENT XC Key System (not available w/10, 10UL, V-10 prefixes) No addition 21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Flat Lip ANSI 4-7/8" Strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E No addition

- Cylinders - IMPORTANT- See catalog 9200 prefix page for cylinder limitations- Below charges DO NOT include additional charges for special cylinder requirementsDoors up to 2-1/2" thick - lock centeredDoors 2-5/8" to 6" thick OR doors 1-3/4" thick w/max 1" paneling one side: Non Keyed function Add $44.00

Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 60* SARGENT Removable Disposable Construction Core No addition 63* SARGENT Removable Core Cylinder (includes master and grand master keying charges) Add $44.00 / cyl.64* SARGENT Removable Construction Core Cylinder See CK-2 6573*s† Small Format 6-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.65737P*s† Small Format 7-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.68 Lever Outside x Knob Inside – specify K or D Knob Defaults to higher priced lock69 Knob Outside x Lever Inside – specify K or D Knob Defaults to higher priced lock70*s† Small Format Interchangeable disposable plastic construction core No addition 72*s† Small Format Interchangeable 6-pin construction core provided (7-pin with 11 prefix) See CK-2 73*s† Small Format 6-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.737P*s† Small Format 7-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 AV Anti Vandal Pull Trim (available in 32D finish) – refer to ML-65 for Trim only

(Not available with 9270, 9271, 9272, 9273 functions) Add $175.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.Ms† Mogul Lock – Mogul Cylinder to be ordered separate (See V-10 Cylinder section for Mogul Cylinder & price) Add $312.00 SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder – Required to meet UL437 See V-10 SectionVC*s† SARGENT V-10 Interchangeable Core Cylinder See V-10 SectionVSs† SARGENT V-10 Standard Sub-Assembled Cylinder – Required to meet UL437 See V-10 SectionVCVS*s† SARGENT V-10 Removable Core Cylinder Sub-Assembled See V-10 Section

s Not available with 50 function lockout cylinder.* Does NOT meet security Grade 1 requirements.** Not available with M- prefix.† Not available with 60, 63, 64 prefixes.

SuffixCPC Clear Powder Coat over 26D/32D – 9205 x LNB x 32D x CPC Add $31.00




ML-91MORTISE LOCKS

9200

Function Finish

Single Cylinder A.S.T.M.# A.N.S.I.# 4, 26D 32D9204 Storeroom 407 F079205 Office 404 F049206 Service9235 Storeroom $821.00 $860.009237 Classroom 405 F059255 Office 404 F04Single Cylinder with Deadbolt

9224 Storeroom 421 MOD. F21 $846.00 $886.009225 Dormitory 413 MOD. F13Single Cylinder with Deadbolt

9243 Entrance F20 $860.00 $899.009245 Entrance F12Single Cylinder with Deadbolt

9250 Hotel F15 MOD. $876.00 $915.00Double Cylinder

9216 Public Entrance 409 F099217 Asylum 433-2 F30 $893.00 $933.009238 Classroom Security F32

9259 Double Locking

Double Cylinder with Deadbolt

9226 Storeroom 414-2 F149239 Classroom Security F339240 Classroom Security F34 $925.00 $965.009241 Classroom Security9249 Security DeadboltElectro Mechanical Single Cyl. – Specify 12V or 24V

9270-12V / 9270-24V Fail Safe9271-12V / 9271-24V Fail Secure

$1,006.00 $1,045.00

Electro Mechanical Double Cyl. – Specify 12V or 24V

9272-12V / 9272-24V Fail Safe9273-12V / 9273-24V Fail Secure $1,056.00 $1,095.00 NonKeyed

9215 Passage 401 F01 $675.00 $714.009265 Privacy 419 MOD. F22 $783.00 $823.00Non Keyed with Deadbolt

9266 Privacy F19 $833.00 $874.00

* Not available with Mogul Cylinder (M-prefix)

**

**

**

*

Rose: LN (Shown), L • Levers: B (Shown), L, J, P

LNB

*

*

*

*



ML-92MORTISE LOCKS

PREFIXES-9200

PrefixNumber Description Price3 Stainless Steel Hubs Add $55.00 10s SARGENT Signature Key Systems Add $34.00 / cyl.10ULs SARGENT Signature Cylinders Meeting UL437 Add $48.00 / cyl.11**† SARGENT XC Key System (not available w/10, 10UL, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21s† SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s† SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Flat Lip ANSI 4-7/8" Strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E

- Cylinders - IMPORTANT- See catalog 9200 prefix page for cylinder limitations- Below charges DO NOT include additional charges for special cylinder requirementsDoors up to 2-1/2" thick - lock centered No addition Doors 2-5/8" to 6" thick OR doors 1-3/4" thick w/max 1" paneling one side: Non Keyed function Add $44.00

Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 60* SARGENT Removable Disposable Construction Core No addition 63* SARGENT Removable Core Cylinder (includes master and grand master keying charges) Add $44.00 / cyl.64* SARGENT Removable Construction Core Cylinder See CK-2 6573*s† Small Format 6-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.65737P*s† Small Format 7-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.68 Lever Outside x Knob Inside – specify K or D Knob Defaults to higher priced lock69 Knob Outside x Lever Inside – specify K or D Knob Defaults to higher priced lock70*s† Small Format Interchangeable disposable plastic construction core No addition 72*s† Small Format Interchangeable 6-pin construction core provided (7-pin with 11 prefix) See CK-2 73*s† Small Format 6-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.737P*s† Small Format 7-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 AV Anti Vandal Pull Trim (available in 32D finish) – refer to ML-65 for Trim only


s Not available with 50 function lockout cylinder.* Does NOT meet security Grade 1 requirements.** Not available with M- prefix.† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 9205 x SNB x 32D x CPC Add $31.00




ML-93MORTISE LOCKS

9200

(provided with knurled security trim and torx® security screws)Function Finish

Single Cylinder A.S.T.M.# A.N.S.I.# 4, 26D 32D

9204 Storeroom 407 F07

9205 Office 404 F04

9206 Service $895.00 $936.00

9235 Storeroom

9237 Classroom 405 F05

9255 Office 404 F04Single Cylinder with Deadbolt

9224 Storeroom 421 MOD. F21 $922.00 $962.00

9225 Dormitory 413 MOD. F13Single Cylinder with Deadbolt

9243 Entrance F20 $936.00 $974.00

9245 Entrance F12

Single Cylinder with Deadbolt9250 Hotel F15 MOD. $951.00 $991.00Double Cylinder

9216 Public Entrance 409 F09

9217 Asylum 433-2 F30 $970.00 $1,010.00

9238 Classroom Security F32

9259 Double Locking

Double Cylinder with Deadbolt9226 Storeroom 414-2 F14


9240 Classroom Security F34 $1,000.00 $1,041.00


9249 Security DeadboltElectro Mechanical Single Cyl. – Specify 12V or 24V

9270-12V / 9270-24V Fail Safe9271-12V / 9271-24V Fail Secure $1,081.00 $1,121.00Electro Mechanical Double Cyl. – Specify 12V or 24V

9272-12V / 9272-24V Fail Safe9273-12V / 9273-24V Fail Secure

$1,130.00 $1,171.00

Non Keyed

9215 Passage 401 F01 $752.00 $791.00

9265 Privacy 419 MOD. F22 $860.00 $899.00Keyed with Deadbolt

9266 Privacy F19 $910.00 $948.00


*

*

*

*

*

*

*

*

*

*

*

Rose: SN, SL (Shown) • Levers: B, L (Shown), J, P

SLL



ML-94MORTISE LOCKS

PREFIXES

PrefixNumber Description Price3 Stainless Steel Hubs Add $55.00 10s SARGENT Signature Key Systems Add $34.00 / cyl.10ULs SARGENT Signature Cylinders Meeting UL437 Add $48.00 / cyl.11† SARGENT XC Key System (not available w/10, 10UL, 60, 63, 64, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21†s SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22†s SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Flat Lip ANSI 4-7/8" Strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 60*s SARGENT Removable Disposable Construction Core No addition 63*s SARGENT Removable Core Cylinder (includes master and grand master keying charges) Add $44.00 / cyl.64*s SARGENT Removable Construction Core Cylinder See CK-2 6573*†s Small Format 6-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.65737P*†s Small Format 7-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.70*†s Small Format Interchangeable disposable plastic construction core No addition 72*†s Small Format Interchangeable 6-pin construction core provided (7-pin with 11 prefix) See CK-2 73*†s Small Format 6-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.737P*†s Small Format 7-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SG MicroShield™ – an antimicrobial powder coat finish Add $31.00

s Not available with 50 function lockout cylinder.* Does NOT meet security Grade 1 requirements.† Not available with 60, 63, 64 prefixes

SuffixCPC Clear Powder Coat over 26D/32D – 9205 x LE3B x 32D x CPC Add $31.00




ML-95MORTISE LOCKS

9200

Function Finish


9204 Storeroom 407 F079205 Office 404 F04 $907.00 $945.009237 Classroom 405 F059255 Office 404 F04Single Cylinder with Deadbolt9224 Storeroom 421 MOD. F21 $933.00 $972.009225 Dormitory 413 MOD. F13Single Cylinder with Deadbolt9243 Entrance F20 $945.00 $987.009245 Entrance F12Single Cylinder with Deadbolt9250 Hotel F15 MOD. $962.00 $1,000.00Non Keyed9215 Passage 401 F01 $761.00 $802.009265 Privacy 419 MOD. F22 $869.00 $910.00Non Keyed with Deadbolt9266 Privacy F19 $920.00 $960.00Electro Mechanical Single Cyl. – Specify 12V or 24V9270-12V / 9270-24V Fail Safe9271-12V / 9271-24V Fail Secure $1,092.00 $1,130.00

Escutcheon: LE3 (Shown), LE4 • Levers: B, L (Shown), J, P

LE3L



ML-96MORTISE LOCKS

PREFIXES-9200

PrefixNumber Description Price3 Stainless Steel Hubs Add $55.00 10s SARGENT Signature Key Systems Add $34.00 / cyl.10ULs SARGENT Signature Cylinders Meeting UL437 Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, V-10 prefixes) No addition 21s SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Flat Lip ANSI 4-7/8" Strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 68 Lever Outside x Knob Inside (K Knob Only) Defaults to higher priced lock69 Knob Outside x Lever Inside (K Knob Only) Defaults to higher priced lock75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SG MicroShield™ – an antimicrobial powder coat finish Add $31.00

s Not available with 50 function lockout cylinder.* Does NOT meet security Grade 1 requirements

SuffixCPC Clear Powder Coat over 26D/32D – 9205 x LSB x 32D x CPC Add $31.00




ML-97MORTISE LOCKS

9200


9204 Storeroom 407 F079205 Office 404 F04 $1,169.00 $1,210.009237 Classroom 405 F059255 Office 404 F04

Single Cylinder with Deadbolt

9224 Storeroom 421 MOD. F21 $1,195.00 $1,234.009225 Dormitory 413 MOD. F13


9243 Entrance F20 $1,210.00 $1,248.009245 Entrance F12


9250 Hotel F15 MOD. $1,225.00 $1,265.00

Double Cylinder

9216 Public Entrance 409 F099217 Asylum 433-2 F30 $1,243.00 $1,282.00


9259 Double Locking


9226 Storeroom 414-2 F14


9340 Classroom Security F34 $1,274.00 $1,315.00


9249 Security Deadbolt

Non Keyed

9215 Passage 401 F01 $1,024.00 $1,064.009265 Privacy 419 MOD. F22 $1,133.00 $1,172.00

Non Keyed with Deadbolt

9266 Privacy F19 $1,182.00 $1,223.00

Function Finish

Escutcheon: LS (Shown) • Levers: B, L (Shown), J, P

LSL


ML-98MORTISE LOCKS

PREFIXES-9200April 15, 2008 | Minimum Order $250



Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 60* SARGENT Removable Disposable Construction Core No addition 63* SARGENT Removable Core Cylinder (includes master and grand master keying charges) Add $44.00 / cyl.64* SARGENT Removable Construction Core Cylinder See CK-2 6573*s† Small Format 6-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.65737P*s† Small Format 7-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.67 9200 Knob Outside x Knob Inside No Add 70*s† Small Format Interchangeable disposable plastic construction core No addition 72*s† Small Format Interchangeable 6-pin construction core provided (7-pin with 11 prefix) See CK-2 73*s† Small Format 6-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.737P*s† Small Format 7-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 AV Anti Vandal Pull Trim (available in 32D finish) – refer to ML-65 for Trim only






ML-99MORTISE LOCKS


Note: Must be ordered with 67 prefix.


Prefix Single Cylinder A.S.T.M.# A.N.S.I.# 4, 26D 32D

67-9204 Storeroom 407 F07

67-9205 Office 404 F04

67-9206 Service $1,043.00 $1,083.00

67-9235 Storeroom

67-9237 Classroom 405 F05

67-9255 Office 404 F04Single Cylinder with Deadbolt

67-9224 Storeroom 421 MOD. F21 $1,068.00 $1,109.00

67-9225 Dormitory 413 MOD. F13Single Cylinder with Deadbolt

67-9243 Entrance F20 $1,083.00 $1,122.0067-9245 Entrance F12

Single Cylinder with Deadbolt67-9250 Hotel F15 MOD. $1,098.00 $1,139.00Double Cylinder

67-9216 Public Entrance 409 F09

67-9217 Asylum 433-2 F30 $1,116.00 $1,156.0067-9238 Classroom Security F32

67-9259 Double Locking

Double Cylinder with Deadbolt67-9226 Storeroom 414-2 F14

67-9239 Classroom Security F33

67-9240 Classroom Security F34 $1,147.00 $1,188.00

67-9241 Classroom Security

67-9249 Security DeadboltElectro Mechanical Single Cyl. – Specify 12V or 24V

67-9270-12V / 67-9270-24V Fail Safe

67-9271-12V / 67-9271-24V Fail Secure $1,228.00 $1,268.00Electro Mechanical Double Cyl. – Specify 12V or 24V

67-9272-12V / 67-9272-24V Fail Safe67-9273-12V / 67-9273-24V Fail Secure $1,278.00 $1,318.00Non Keyed

67-9215 Passage 401 F01 $898.00 $938.00

67-9265 Privacy 419 MOD. F22 $1,007.00 $1,045.00Keyed with Deadbolt

67-9266 Privacy F19 $1,058.00 $1,096.00


*

*

*

*

*

*

*

*

*

*

*

Rose: SL (Shown), SN • Knob: K (Shown)

SLK


ML-100MORTISE LOCKS


PrefixNumber Description Price3 Stainless Steel Hubs Add $55.00 10s SARGENT Signature Key Systems Add $34.00 / cyl.10ULs SARGENT Signature Cylinders Meeting UL437 Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, V-10 prefixes) No addition 21s SARGENT Construction Key System (lost ball) Standard on all new systems established since 5/1/96 Add $10.00 / cyl.22s SARGENT Construction Key System (split key) To be used on pre-established split key systems only Add $10.00 / cyl.23 Flat Lip ANSI 4-7/8" Strike No addition 31 Thick Doors - Extended Lip Required - Specify Length C to E


Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 67 9200 Knob Outside x Knob Inside No Add 75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SG MicroShield™ – an antimicrobial powder coat finish Add $31.00

s Not available with 50 function lockout cylinder.* Does NOT meet security Grade 1 requirements

SuffixCPC Clear Powder Coat over 26D/32D – 9205 x LSB x 32D x CPC Add $31.00



ML-101MORTISE LOCKS

9200HOLDERS & STO7800/8200April 15, 2008 | Minimum Order $250


67-9204 Storeroom 407 F0767-9205 Office 404 F04 $1,318.00 $1,358.0067-9237 Classroom 405 F0567-9255 Office 404 F04


67-9224 Storeroom 421 MOD. F21 $1,344.00 $1,383.0067-9225 Dormitory 413 MOD. F13


67-9243 Entrance F20 $1,358.00 $1,397.0067-9245 Entrance F12


67-9250 Hotel F15 MOD. $1,373.00 $1,413.00

Double Cylinder

67-9216 Public Entrance 409 F0967-9217 Asylum 433-2 F30 $1,392.00 $1,431.00




67-9226 Storeroom 414-2 F14




67-9249 Security Deadbolt

Non Keyed

67-9215 Passage 401 F01 $1,173.00 $1,213.0067-9265 Privacy 419 MOD. F22 $1,281.00 $1,320.00

Non Keyed with Deadbolt

67-9266 Privacy F19 $1,331.00 $1,371.00

Function Finish

Note: Must be ordered with 67 Prefix Escutcheon: LS • Knob: K

LSK


ML-102MORTISE LOCKS




Keyed function Add $87.00 36 6 Lobe security head screw Add $19.00 60* SARGENT Removable Disposable Construction Core No addition 63* SARGENT Removable Core Cylinder (includes master and grand master keying charges) Add $44.00 / cyl.64* SARGENT Removable Construction Core Cylinder See CK-2 6573*s† Small Format 6-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.65737P*s† Small Format 7-Pin Uncombinated Core (see CK-8 for available keyways) Add $31.00 / cyl.67 9200 Knob Outside x Knob Inside No Add 70*s† Small Format Interchangeable disposable plastic construction core No addition 72*s† Small Format Interchangeable 6-pin construction core provided (7-pin with 11 prefix) See CK-2 73*s† Small Format 6-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.737P*s† Small Format 7-pin interchangeable core (see CK-8 for available keyways) Add $40.00 / cyl.75 Knurled Inside Lever Add $56.00 76 Knurled Outside Lever Add $56.00 77 Knurled Both levers Add $112.00 AV Anti Vandal Pull Trim (available in 32D finish) – refer to ML-65 for Trim only

(Not available with 9270, 9271, 9272, 9273 functions) Add $175.00 Ms† Mogul Lock – Mogul Cylinder to be ordered separate (See V-10 Cylinder section for Mogul Cylinder & price) Add $312.00 SG MicroShield™ – an antimicrobial powder coat finish Add $31.00 VAs† SARGENT V-10 Standard Cylinder – Required to meet UL437 See V-10 SectionVC*s† SARGENT V-10 Interchangeable Core Cylinder See V-10 SectionVSs† SARGENT V-10 Standard Sub-Assembled Cylinder – Required to meet UL437 See V-10 SectionVCVS*s† SARGENT V-10 Removable Core Cylinder Sub-Assembled See V-10 Section





ML-103MORTISE LOCKS


SLDRose: SL (shown)Knob: D (shown)

NOTE: Not ADA Compliant. Must be ordered with 67 prefix.



67-9204 Storeroom 407 F07

67-9205 Office 404 F04

67-9206 Service $1,513.00 $1,554.00

67-9235 Storeroom

67-9237 Classroom 405 F05

67-9255 Office 404 F04Single Cylinder with Deadbolt

67-9224 Storeroom 421 MOD. F21 $1,539.00 $1,580.00

67-9225 Dormitory 413 MOD. F13Single Cylinder with Deadbolt

67-9243 Entrance F20 $1,554.00 $1,593.00

67-9245 Entrance F12

Single Cylinder with Deadbolt67-9250 Hotel F15 MOD. $1,568.00 $1,609.00Double Cylinder

67-9216 Public Entrance 409 F09

67-9217 Asylum 433-2 F30 $1,586.00 $1,628.00



Double Cylinder with Deadbolt67-9226 Storeroom 414-2 F14




67-9249 Security DeadboltElectro Mechanical Single Cyl. – Specify 12V or 24V

67-9270-12V / 67-9270-24V Fail Safe67-9271-12V / 67-9271-24V Fail Secure $1,698.00 $1,739.00Electro Mechanical Double Cyl. – Specify 12V or 24V

67-9272-12V / 67-9272-24V Fail Safe67-9273-12V / 67-9273-24V Fail Secure $1,748.00 $1,789.00NNon Keyed

67-9215 Passage 401 F01 $1,368.00 $1,409.00

67-9265 Privacy 419 MOD. F22 $1,477.00 $1,516.00Keyed with Deadbolt

67-9266 Privacy F19 $1,528.00 $1,566.00


*

*

*

*

*

*

*

*

*

*

*



ML-104MORTISE LOCKS

9200 DEADLOCKS/LOCK BODIES

Function FinishSingle Cylinder Deadlock Function Description A.S.T.M.# A.N.S.I.# 4, 26D 32D

9203 Cylinder x Thumbturn Classroom Deadlock F29 $373.00 $415.009220 Cylinder Deadlock 418 F18 $335.00 $373.009221 Cylinder x Thumbturn Deadlock 417 F17` $373.00 $415.00Double Cylinder Deadlock9222 Cylinder Deadlock 416 F16 $389.00 $427.009223 Cylinder x Thumbturn Deadlock $427.00 $469.00

9200 DEADLOCK (NO TRIM)

9200 LOCKBODIES (NO TRIM)FunctionSingle Cylinder FinishesCat. # For Lever Trim: Cat. # For Knob Trim Function Description A.S.T.M.# A.N.S.I.# 4, 26D, 32D

9204 67-9204 Storeroom or Closet 407 F079205 67-9205 Office or Entry 404 F049206 67-9206 Service or Service $448.00 9237 67-9237 Classroom 405 F059255 67-9255 Office or Entry 404 F04Single Cylinder with Deadbolt9224 67-9224 Storeroom 421 Mod. F219225 67-9225 Dormitory or Exit 413 Mod. F139235 67-9235 Storeroom $486.009243 67-9243 Appartment Corridor F209245 67-9245 Dormitory or Exit F129250 67-9250 Hotel Guest F15 Mod.Double Cylinder9216 67-9216 Apartment, Exit or Public Restroom 409 F099217 67-9217 Asylum or Institutional 433-2 F30 $448.009238 67-9238 Classroom Security Intruder F329259 67-9259 School SecurityDouble Cylinder with Deadbolt9226 67-9226 Store Door 414-2 F149239 67-9239 Classroom Security Intruder F339240 67-9240 Classroom Security Intruder F34 $486.009241 67-9241 Classroom Security9249 67-9249 SecurityElectro Mechanical Single Cyl. – Specify 12V or 24V9270-12V / -24V 67-9270-12V / -24V Electrical Fail Safe

$658.009271-12V / -24V 67-9271-12V / -24V Electrical Fail SecureElectro Mechanical Double Cyl. – Specify 12V or 24V9272-12V / -24V 67-9272-12V / -24V Electrical Fail Safe $658.00 9273-12V / -24V 67-9273-12V / -24V Electrical Fail SecureNon-Keyed9215 67-9215 Passage or Closet 401 F01 $313.00 9265 67-9265 Privacy Bedroom or Bath-latch 419 Mod. F22 $415.009266 67-9266 Privacy Bedroom or Bath-deadbolt F19 $461.00

Note: Cylinder and trim not included with lockbodies. Outside front, strike and screwpack are included.Lockbodies with prefixes 3, 68, 69, or M or any combination, please consult factory for correct part # and price.


ML-105MORTISE LOCKS

9200 PARTSHOLDERS & STO7800/8200April 15, 2008 | Minimum Order $250

9200 Trim - Specify finish when ordering PricePart # Design Description 4, 26D 32D

B, J, L, P Levers - Same as 8200 - refer to 8200 Lever Section refer to 8200 section LE3, LE4, LS Escutcheons - Same as 8200 - refer to 8200 Inside and refer to 8200 section

Outside Escutcheon Section.LN, L Rose - Same as 8200 - refer to 8200 Rose Section refer to 8200 section

92-0034 SN Rose - Security Trim ONLY - requires 92-2171 Trim Pack $40.00 $41.9292-0064 SL Rose - Security Trim ONLY - requires 92-2173 Trim Pack $37.59 $41.9292-2142 Detention Knob for M9200 - O/S Assy. (Cone Shaped) $369.96 $382.71

9200 Accessories - Specify finish when ordering PricePart # Description 4, 26D 32D184SKB Outside Emergency Release Assembly (with Torx screws) $40.00 $47.00130SKB Thumbturn Lever Assembly (Torx screws only) $40.00 $47.00130SB Knurled Knob Assembly (with Torx screws) $138.00 $141.00

9200 Miscellaneous PartsPart # Description Price*M92 Blocking Ring $72.0001-4402 Lockbody Case/Cap Machine Screw - #8-32 x 5/16" (5 per lockbody) $0.41

*92 Blocking Ring $44.00 82-3655 Latch Bolt Assembly $62.59

*92-0015 O/S Front (15, 65) $37.45 *92-0016 O/S Front (04, 06, 13, 16, 17, 31, 36, 37, 38, 67, 70, 71, 72, 73, 78, 79) $37.45 *92-0017 O/S Front (03, 20, 21, 22, 23) $37.45 *92-0018 O/S Front (24, 25, 26) $37.45 *92-0019 O/S Front (40, 41, 50, 51, 52, 76, 77) $37.45 *92-0020 O/S Front (05) $37.45 *92-0021 O/S Front (45) $37.45 *92-0022 O/S Front (43) $37.45 92-0066 Mogul Cylinder Camp Spring $2.51

*92-0072 M- O/S Front (04, 16, 17, 17, 37) $37.45 *92-0073 M- O/S Front (03, 20, 21, 22, 23) $37.45 *92-0074 M- O/S Front (24, 25, 26) $37.45 *92-0075 M- O/S Front (40, 41, 50, 51, 52, 76, 77) $37.45 *92-0076 M- O/S Front (05) $37.45 *92-0077 M- O/S Front (45) $37.45 *92-0078 M- O/S Front (43) $37.45 *92-0079 O/S Front (70, 71, 72, 73) $37.45 *92-0080 M- O/S Front (70, 71, 72, 73) $37.45 92-2151 SN Adaptor & Plate Assembly $8.5692-2171 Trim Pack (SN) $54.6792-2173 Trim Pack (SL) $54.67

*1AB Tapered Cyl. Rosette $87.00*1MB Tapered Cyl. Rosette $79.00*1SB Cylinder Ring Rosette $44.00

Note: Must consult factory for parts relating to M9200's.* Specify finish when ordering – 4, 26D, 32D.


ML-106MORTISE LOCKS


Lock Function Rose Lever 04/26D 32DIS-9204 IS-9235 IS-9245IS-9205 IS-9237 IS-9270 L, LN B, J, L, P $246.00 $267.00IS-9206 IS-9255 IS-9271 SN, SL B, J, L, P $269.00 $289.00IS-9215 IS-9243IS-9216 IS-9259 IS-9249IS-9217 IS-9239 IS-9272 L, LN B, J, L, P $252.00 $271.00IS-9226 IS-9240 IS-9273 SN, SL B, J, L, P $274.00 $293.00IS-9238 IS-9241IS-9224 IS-9250 IS-9266 L, LN B, J, L, P $270.00 $290.00IS-9225 IS-9265 SN, SL B, J, L, P $292.00 $313.00

Lock Function Escutcheon Lever 04/26D 32DIS-9204 IS-9237 IS-9255 IS-9271IS-9205 IS-9215 IS-9270 LE3 B, J, L, P $272.00 $292.00

IS-9243 IS-9224 IS-9250 IS-9266IS-9245 IS-9225 IS-9265 LE3 B, J, L, P $291.00 $311.00

Lock Function Escutcheon Lever 04/26D 32DIS-9204 IS-9215 IS-9243 IS-9255IS-9205 IS-9237 IS-9245 LS B, J, L, P $352.00 $371.00

IS-9216 IS-9226 IS-9239 IS-9241 IS-9259IS-9217 IS-9238 IS-9240 IS-9249 LS B, J, L, P $356.00 $375.00

IS-9224 IS-9250 IS-9266IS-9225 IS-9265 LS B, J, L, P $374.00 $394.00

Lock Function Rose Knob 04/26D 32DIS-9204 IS-9235 IS-9255IS-9205 IS-9237 IS-9270IS-9206 IS-9243 IS-9271 SL, SN K $314.00 $334.00

IS-9215 IS-9245IS-9216 IS-9259 IS-9249IS-9217 IS-9239 IS-9272IS-9226 IS-9240 IS-9273 SL, SN K $318.00 $338.00

IS-9238 IS-9241IS-9224 IS-9250 IS-9266IS-9225 IS-9265 SL, SN K $333.00 $353.00

Lock Function Rose Knob 04/26D 32DIS-9204 IS-9235 IS-9255IS-9205 IS-9237 IS-9270IS-9206 IS-9243 IS-9271 SL D $454.00 $474.00

IS-9215 IS-9245IS-9216 IS-9259 IS-9249IS-9217 IS-9239 IS-9272IS-9226 IS-9240 IS-9273 SL D $459.00 $478.00

IS-9238 IS-9241IS-9224 IS-9250 IS-9266IS-9225 IS-9265 SL D $473.00 $493.00

Lock Function Escutcheon Knob 04/26D 32DIS-9204 IS-9235 IS-9255IS-9205 IS-9237 IS-9270IS-9206 IS-9243 IS-9271 LS K $397.00 $417.00

IS-9215 IS-9245IS-9216 IS-9259 IS-9249IS-9217 IS-9239 IS-9272IS-9226 IS-9240 IS-9273 LS K $401.00 $421.00

IS-9238 IS-9241IS-9224 IS-9250 IS-9266IS-9225 IS-9265 LS K $416.00 $436.00


ML-107MORTISE LOCKS


Lock Function Rose Lever 4/26D 32D

OS-9204 OS-9225 OS-9240 OS-9255OS-9205 OS-9226 OS-9241 OS-9259OS-9206 OS-9235 OS-9243 OS-9270 L, LN B, J, L, P $263.00 $283.00OS-9216 OS-9237 OS-9245 OS-9271 SN, SL B, J, L, P $287.00 $307.00OS-9217 OS-9238 OS-9249 OS-9272OS-9224 OS-9239 OS-9250 OS-9273OS-9215 L, LN B, J, L, P $258.00 $279.00

SN, SL B, J, L, P $282.00 $302.00OS-9265 OS-9266 L, LN B, J, L, P $272.00 $292.00

SN, SL B, J, L, P $296.00 $316.00Lock Function Escutcheon Lever 4/26D 32DOS-9204 OS-9225 OS-9250 OS-9271OS-9205 OS-9237 OS-9255 LE3 B, J, L, P $291.00 $311.00OS-9224 OS-9245 OS-9270OS-9215 LE3 B, J, L, P $287.00 $307.00OS-9265 OS-9266 LE3 B, J, L, P $301.00 $320.00

Lock Function Escutcheon Lever 4/26D 32D

OS-9204 OS-9225 OS-9240 OS-9250OS-9205 OS-9226 OS-9241 OS-9255OS-9216 OS-9237 OS-9243 OS-9259 LS B, J, L, P $374.00 $394.00OS-9217 OS-9238 OS-9245OS-9224 OS-9239 OS-9249OS-9215 LS B, J, L, P $370.00 $390.00OS-9265 OS-9266 LS B, J, L, P $385.00 $405.00

Lock Function Rose Knob 4/26D 32D

OS-9204 OS-9225 OS-9240 OS-9255OS-9205 OS-9226 OS-9241 OS-9259OS-9206 OS-9235 OS-9243 OS-9270OS-9216 OS-9237 OS-9245 OS-9271

SN, SL K$334.00 $354.00

OS-9217 OS-9238 OS-9249 OS-9272OS-9224 OS-9239 OS-9250 OS-9273OS-9215 SN, SL K $330.00 $349.00OS-9265 OS-9266 SN, SL K $343.00 $364.00

Lock Function Rose Knob 4/26D 32D

OS-9204 OS-9225 OS-9240 OS-9255OS-9205 OS-9226 OS-9241 OS-9259OS-9206 OS-9235 OS-9243 OS-9270

$485.00 $504.00

OS-9216 OS-9237 OS-9245 OS-9271SL D

OS-9217 OS-9238 OS-9249 OS-9272OS-9224 OS-9239 OS-9250 OS-9273OS-9215 SL D $479.00 $500.00OS-9265 OS-9266 SL D $494.00 $515.00

Lock Function Escutcheon Knob 4/26D 32D

OS-9204 OS-9225 OS-9240 OS-9255OS-9205 OS-9226 OS-9241 OS-9259OS-9206 OS-9235 OS-9243 OS-9270OS-9216 OS-9237 OS-9245 OS-9271

LS K $422.00 $442.00

OS-9217 OS-9238 OS-9249 OS-9272OS-9224 OS-9239 OS-9250 OS-9273OS-9215 LS K $418.00 $438.00OS-9265 OS-9266 LS K $433.00 $452.00

MULTI-POINT LOCKING HARDWARE

TABLE OF CONTENTS



MULTI-POINT LOCKING HARDWARE

How to Order - ANSI Finish & Function Comparison..............MP-1

7000 Series

Prefixes ....................................................................................MP-2

7000 Series Vertical Rod Lock ................................................MP-3

NB7000 Series

Prefixes ....................................................................................MP-4

NB7000 Series Vertical Rod Lock ...........................................MP-5

WD7000 Series

Prefixes ....................................................................................MP-6

WD7000 Series Vertical Rod Lock ..........................................MP-7

ER/ES/ET Lever Control Trim

ER/ES/ET Lever Control Trim ..................................................MP-8

ER/ES/ET Coastal Lever Control Trim.....................................MP-9

ER/ES/ET Control Trim - Studio Collection - Metro Elements .......MP-10

7000 Strikes & Locking Slide.........................................................MP-11

Parts...............................................................................................MP-12

MP-1MULTI-POINT LOCKING HARDWARE

GENERAL INFORMATION




Function Finish

SARGENT ANSI SARGENT ANSI Description

10-DT 02

13 08

15 14

06 09

40 Similar to 02

43 Similar to 08

46 Similar to 09

US3 605 Polished Brass

US4 606 Satin Brass

US9 611 Polished Bronze

US10 612 Satin Bronze

US10B 613 Oxidized Satin Bronze/Oil Rubbed

US10BL —— Oxidized Satin Bronze/Lacquered

US20D —— Dark Statuary Bronze Powder Coated

US26 625 Polished Chrome


How To Order



Prefix Consult proper section for prefixes available 10 Ea. 12-

Series 7000 10 Ea. 12-7000

Function Consult proper section for functions available 10 Ea. 12-7006

Trim Consult proper section for trims available 10 Ea. 12-7006 ETL

Hand Consult proper section for handing required 10 Ea. 12-7006 ETL LHRB

Finish Consult proper section for finishes available 10 Ea. 12-7006 ETL LHRB 26

Door Height Specify Height of Door 10 Ea. 12-7006 ETL LHRB 26 96"



7000 SERIES PREFIXES

PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 12 UL Fire Label Exit Devices Add $127.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors up to 2-1/4" No addition

For doors over 2-1/4" Consult FactoryFor doors with panels Consult Factory

36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 53 Top bolt monitoring switch Add $183.00 54 Monitor outside lever Add $183.00 55 Monitor inside lever Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 75 Knurled lever, inside Add $71.00 76 Knurled lever, outside Add $56.00 77 Knurled levers, inside and outside Add $127.00 F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) Removable Core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section




7000 SERIES

Escutcheon:ER/ES/ET Control

Lever A-B-E-F-J-L-P-WShown: ETL


Coastal Lever Y-C-G-R-S& All Metro Elements Levers

Shown: ETY

7000 Series-Vertical Rod Lock

Finish

7000 Series 10, 3, 4, 10BL, 10, 3, 4, 10BL,Function 10B, 26D 15, 20D, 26 10B, 26D 15, 20D, 26

7010 Dummy Trim (Lever Rigid) $2,205.00 $2,285.00 $2,338.00 $2,419.00

7006 Key Operates ET $2,205.00 $2,285.00 $2,338.00 $2,419.00

7013 Key Locks/Unlocks Control $2,205.00 $2,285.00 $2,338.00 $2,419.00

7015 Trim Always Operable $2,205.00 $2,285.00 $2,338.00 $2,419.00

7000 Series With Freewheeling Trim

7040 Dummy Trim (Lever Rotates) $2,205.00 $2,285.00 $2,338.00 $2,419.00

7043 Key Engages/Disengages Lever $2,205.00 $2,285.00 $2,338.00 $2,419.00

7046 Key Operates ET $2,205.00 $2,285.00 $2,338.00 $2,419.00

Electromechanical

7073* Fail Safe-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00

7074* Fail Secure-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00

*24v standard; 12v available as special…consult factory.

NOTES: 7010, 7073, 7074 are available with additional Auxiliary Control (106/113) Add $417.00

Inside trim is always MP715 (passage function)

683 Kit for Single Door Application Requires 2 Kits (2 Pins/Kit)683 $58.00 /Kit

Note: thermal pin is not needed for double latching applications.


Please specify hand when ordering.



NB7000 SERIES PREFIXES



36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 53 Top bolt monitoring switch Add $183.00 54 Monitor outside lever Add $183.00 55 Monitor inside lever Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 75 Knurled lever, inside Add $71.00 76 Knurled lever, outside Add $56.00 77 Knurled levers, inside and outside Add $127.00 F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) Removable Core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section




NB7000 SERIES


Lever A-B-E-F-J-L-P-WShown: ETL



Shown: ETY

NB7000 Series-Vertical Rod Lock

Finish


NB7010 Dummy Trim (Lever Rigid) $2,205.00 $2,285.00 $2,338.00 $2,419.00

NB7006 Key Operates $2,205.00 $2,285.00 $2,338.00 $2,419.00

NB7013 Key Locks/Unlocks Control $2,205.00 $2,285.00 $2,338.00 $2,419.00

NB7015 Trim Always Operable $2,205.00 $2,285.00 $2,338.00 $2,419.00


NB7040 Dummy Trim (Lever Rotates) $2,205.00 $2,285.00 $2,338.00 $2,419.00

NB7043 Key Engages/Disengages Lever $2,205.00 $2,285.00 $2,338.00 $2,419.00

NB7046 Key Operates ER/ES/ET $2,205.00 $2,285.00 $2,338.00 $2,419.00

Electromechanical

NB7073* Fail Safe-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00

NB7074* Fail Secure-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00


NOTES: NB7010, NB7073, NB7074 are available with additional Auxiliary Control (106/113) Add $417.00


One thermal pin is supplied with each NB device for double door application

Fire rated NB is not available on single door applications




WD7000 SERIES PREFIXES





36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 53 Top bolt monitoring switch Add $183.00 54 Monitor outside lever Add $183.00 55 Monitor inside lever Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 75 Knurled lever, inside Add $71.00 76 Knurled lever, outside Add $56.00 77 Knurled levers, inside and outside Add $127.00 F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) Removable Core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.NB Less Bottom Bolt No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


WD7000 SERIES



Escutcheon:ER/ES Control

Lever A-B-E-F-J-L-P-WShown: ERL

Escutcheon:ER/ES Control


Shown: ESY

WD7000 Series-Vertical Rod Lock

Finish


WD7010 Dummy Trim (Lever Rigid) $2,205.00 $2,285.00 $2,338.00 $2,419.00

WD7006 Key Operates $2,205.00 $2,285.00 $2,338.00 $2,419.00

WD7013 Key Locks/Unlocks Control $2,205.00 $2,285.00 $2,338.00 $2,419.00

WD7015 Trim Always Operable $2,205.00 $2,285.00 $2,338.00 $2,419.00


WD7040 Dummy Trim (Lever Rotates) $2,205.00 $2,285.00 $2,338.00 $2,419.00

WD7043 Key Engages/Disengages Lever $2,205.00 $2,285.00 $2,338.00 $2,419.00

WD7046 Key Operates ER/ES/ET $2,205.00 $2,285.00 $2,338.00 $2,419.00

Electromechanical

WD7073* Fail Safe-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00

WD7074* Fail Secure-24v $2,389.00 $2,469.00 $2,522.00 $2,603.00


NOTES: WD7010, WD7073, WD7074 are available with additional Auxiliary Control (106/113) Add $417.00


One thermal pin is supplied with each WDNB device for double door application

Fire Rated WDNB is not available on single door applications



ER/ES/ET LEVER CONTROL TRIM


700 Series Inside ER/ES/ET Lever Type Trim Function Series

Finish

TRIM# FUNCTION 3, 4, 10, 10BL, 15, 20D, 26, 26D

MP715 Used with all available outside functions $417.00

700 Series ER/ES/ET Lever Type Trim Function Series (Available as Listed)

Finish


706-2 7006, NB7006, WD7006

710-2 7010, NB7010, WD7010 $417.00713-2 7013, NB7013, WD7013

715-2 7015, NB7015, WD7015

773-2 7073, NB7073, WD7073 $589.00774-2 7074, NB7074, WD7074

700 Series Freewheeling ER/ES/ET Lever Type Trim Function Series (Available as Listed)

Finish


740-2 7040, NB7040, WD7040

743-2 7043, NB7043, WD7043 $417.00

746-2 7046, NB7046, WD7046

Escutcheon:ER/ES/ET ControlLever A-B-E-F-J-L-P-W

Shown:*ETL

* ET control trim is not available for WD7000 Series.

Note: All Exit Trim is priced with cylinder where required. How to order: Trim # x Lever Design – Example: 706-2ETL x Finish.


Shown:ERL

Shown:ESL


ER/ES/ET LEVER CONTROL TRIMCOASTAL SERIES DESIGN



Finish




Finish


706-2 7006, NB7006, WD7006

710-2 7010, NB7010, WD7010 $558.00713-2 7013, NB7013, WD7013

715-2 7015, NB7015, WD7015

773-2 7073, NB7073, WD7073 $714.00774-2 7074, NB7074, WD7074


Finish


740-2 7040, NB7040, WD7040

743-2 7043, NB7043, WD7043 $558.00

746-2 7046, NB7046, WD7046

Escutcheon:ER/ES/ET ControlLever C-G-R-S-Y

* ET control trim is not available for WD7000 Series

Note: All Exit Trim is priced with cylinder where required. How to order: Trim # x Lever Design – Example: 706-2ETY x Finish.

Handed: Specify when ordering.

April 15, 2008 Minimum Order $250

Shown:*ETY

Shown:ERY

Shown:ESY


Escutcheon Design: Lever Series Designs: How to order: 706-2ETMMER/ES/sET Centro Notting Hill Aventura Rialto Odeon Function 740

MC *MQ MA MO *MN Escutcheon ETMD MR MB *ML *MH Lever MMMJ *MT ME *MK Hand RHMP *MM MF *MS Finish 26D

MG *MUMI *MVMW

s ET control trim is not available for WD7000 series* Handed: specify hand when ordering


Finish




Finish


706-2 7006, NB7006, WD7006

710-2 7010, NB7010, WD7010 $558.00713-2 7013, NB7013, WD7013

715-2 7015, NB7015, WD7015

773-2 7073, NB7073, WD7073 $714.00774-2 7074, NB7074, WD7074


Finish


740-2 7040, NB7040, WD7040

743-2 7043, NB7043, WD7043 $558.00

746-2 7046, NB7046, WD7046


ER/ES/ET LEVER CONTROL TRIMSTUDIO COLLECTION – METRO ELEMENTSApril 15, 2008 | Minimum Order $250


7000 STRIKES, LOCKING SLIDE, AND SPINDLE KITS


Strikes Parts Description Price

606 Bottom Strike Pack $43.80

650 Top Strike Pack $25.76

Locking Slide Replacement Kit

Parts Description Price

607-1 Locking Slide Replacement Kit (713) $81.00

607-2 Locking Slide Replacement Kit (706) $81.00



PARTS



Part # Description Price

01-0696 Spirol Pin $0.71 01-1027 Extension Connector $0.71 01-1154 Machine Screw #6-32 x 1/4" $0.95 01-1182 Cap Screw $1.78 01-1183 Machine Screw PH Truss Head $0.48 01-1479 #10-32 x .500 PH FL HD MH Screw $0.11 01-4451 Thru Bolt 1/4-20 x 2 3/8" (1 3/4" door) $1.24 01-4468 Thru Bolt 1/4-20 x 3" (1 3/4" door) $1.09 01-4507 Groove Pin Double Headed $0.42 01-4540 Machine Screw #10-48 UNC x 5/8 PH Pan HD $0.66 01-4560 #3-48 x .125 PH RD HD Machine Screw $0.60 01-9105 Tooth Lock Washer $0.06 52-2556 Motor and Housing Assy $219.09 68-0044 Top Rod (specify door size and cross bar height $31.57 68-0045 Bottom Rod $31.57 68-0888 Bottom Plate $59.73 68-1270 Extension Connector $20.50 68-1286 Top Rod Extension $23.73 68-1393 Retainer Plate $5.83 68-1402 Retaining Plate (Electrical) $0.81 68-3627 Inner Case Assy (12-) $264.61 68-3677 Screw Pack $12.18 68-4840 Latch Bolt Assy $25.76 68-5374 Top Case Assy (Standard) $146.39 82-0184 Cap $5.74 94-2008 Inner Case Assy (STD) $195.63 94-2413 Inner Case Assy (53-) $378.67 94-2414 Inner Case Assy (12-, 53-) $505.55 94-2423 Inner Case Assy (WD) $195.63 94-2424 Inner Case Assy (53-WD) $378.67 97-0328 ET Solenoid Cover $56.17 97-0329 Locking Tail $44.70 97-0347 Locking Slide Spring $4.24 97-0350 Collar $8.48 97-0425 Hub Spring $7.53 97-0475 Locking Slide $40.59 97-0476 Locking Slide $47.01 97-0477 Bushing Insert $6.02 97-0478 Lower Hub Plate $3.74 97-0479 Spindle Lock $25.29 97-0522 Lower Hub Plate $1.64 97-0528 Locking Piece $1.90 97-0557 Fusable Link $0.15 97-0566 Hub Spring (J Lever Only) $7.53 97-0571 Locking Slide Spring $0.54 97-0573 Spindle $5.03 97-0581 Retaining Plate $2.40 97-0582 Spacer $1.49 97-0603 Cam $3.92 97-3098 Spindle Assy $33.08

DOOR CLOSERS/HOLDERS & STOPS

TABLE OF CONTENTS



DOOR CLOSERS

How to Order/ANSI Finish & Function Comparison.................DC-1

Additional Features ..................................................................DC-2

281/351/1431 Series................................................................DC-3

351 Pocket Closer/268, 269, 281 Security Package Closer/421 Cam Action Door Closer/268, 269, 278 Concealed Closers .....................................................................................DC-4

Finish Options ..........................................................................DC-5

Arms, Accessories ...................................................................DC-6

Bodies & Covers ......................................................................DC-7

1331 & 1130 Series .................................................................DC-8

Parts

Parts 01-0134 thru 63-3641.....................................................DC-9

Parts 63-3684 thru 64-2409...................................................DC-10

HOLDERS & STOPS

Overhead Door Holders & Stops, Accessories........................HS-1

Electromagnetic Door Holder, Parts & Accessories.................HS-2

DC-1DOOR CLOSERS

GENERAL INFORMATION



NOTES:

1. 351, 268, 269, 278, 281, 421, 1431, 1331 and 1130 Series Closers are ANSI BHMA A156.4 – 2000 Grade 1 certified

2. 351, 268, 269, 278,281, 421, 1431 and 1331 Series Closers UL Listed for use on fire doors and conforms with standards

UL10C and UBC7-2 (1997), (Positive pressure fire test)

3. 351, 281 and 1431 Series closers are certified for above ANSI functions including PT4 options A, B, D, E, F, G, H

4. 1130, 1331 Series closers are certified for above ANSI functions including PT4 options A, B, C, D, H

Function

SARGENT ANSI

Arm Type

O CO2011

P9 CO2021

H CO2051

PH9 CO2061

F CO2091

PF9 CO2101

O CO2041

H CO2081

F CO2121

268-O CO5031

269-O CO5041

278-H CO5091

278-O CO5011

278-F CO5101


Finish


EN 689 Aluminum Enamel

EB 690 Bronze Enamel to match 10B

ED 693 Black Enamel to match 20D

EP 691 Bronze Enamel to match 10

EAB 696 Brass Enamel to be used with Brass finishes

3 605 Bright Brass, Clear Coated Polished Brass

4 606 Satin Brass, Clear Coated Dull Brass

9 637 Bright Bronze, Clear Coated

10 612 Satin Bronze, Clear Coated Dull Bronze

10B 613 Dark Oxidized Dull Bronze, Oil Rubbed

15 619 Dull Nickel with Clear Coat

20D – Statuary Dark Bronze with Clear Coat

26 625 Bright Chromium Plated Polished Chrome

26D 626 Satin Chromium Plated Dull Chrome

10BL – Oxidized Dull Bronze with Clear Coat

How To Order



Series 351, 268, 269, 278, 281, 421, 1431, 1130 20 Ea.- 281

Arm Consult proper section for arms available 20 Ea.- 281-P10

Finish Consult proper section for finishes available 20 Ea.- 281-P10-EB

Hand Consult proper section to determine if handing is required 20 Ea.- 281-P10-EB

Suffix Option Consult proper section for options available 20 Ea.- 281-P10-EB-TB

Prefix Option Consult proper section for options available 20 Ea.-SR-281-P10-EB-TB

Miscellaneous Overhead holder template number Template number _______



DC-2DOOR CLOSERS

ADDITIONAL FEATURES

Additional Features with Door Closers - Available with 351, 281, 421, 1431 Series ClosersPrefix Description Price

SG MicroShield™ - an antimicrobial powder coat - must be ordered w/Metal Covers and only

available in 3, 4, 9, 10, 10B, 15, 20D, 26, 26D finishes Add $21.00

SR Corrosion Protection - Additional Special Rust Inhibitor (SRI):

351, 421, 1431 Series - Not available w/plated finishes - Arm Only Add $15.00

268, 269, 278, 281 Series - Not available w/plated finishes - Arm & Body Add $26.00

36 6-Lobe screws (Security Torx-Machine screws only) Add $19.00

Suffix Description Price

ABC Advanced Backcheck: 281 Series only $18.00 Add

DA Delayed Action: 351, 281, 421, 268, 269, 278, 1431 Series $27.00 Add

MC Closer w/Metal cover - 351, 281, 1431, 421 Series - Handed, indicate RH or LH $12.00 Add

Cover includes SRI as standard - EB, ED, EN, EP, EAB

To order covers separately, refer to DC-7

TB Mortise Nuts for use with machine screws, supplied with closer No Addition

Factory sizing upon request - specify size No Addition

Standard Features:

Backcheck: 351, 281, 421, 1431 Series - Standard No Addition

Pressure Relief Valves: 268, 281, 421, 278, 1431 Series - Standard No Addition

Extreme Temperature Fluid: 268, 278, 281, 421, 351, 1431 Series - Standard No Addition

Installation Aids/Miscellaneous PartsPart # Description Price

4TB Mortise Nuts ordered separate – used w/Machine Screws (provided w/every closer) (4 per set) $5.30 /Set

82-3855 Torx Bit Kit (Sizes T8, T9, T10, T15, T20, T25, T27) $150.32 /each

82-3856 Spanner Bit Kit (Sizes 4, 6, 8, 10, 12, 1/4") $97.71 /each

01-0041 Hex Key (1/8" Allen Wrench) $2.10 /each63-0694 Hex Wrench, for indexing and adjusting PH10 arms $4.38 /each

Notes: Lead Line Covers available with 351, 281, 421 and 1431 closers Add $78.00 How to Order: 351 x EN x Lead Line CoverOrders will be handled as “special” – Discounts do not apply.



DC-3DOOR CLOSERS

1431/281/351 SERIES

$264.00 N/A N/A $264.00 N/A N/A $269.00 N/A N/A $275.00 $308.00 $323.00 N/A N/A $323.00 $275.00 $308.00 $323.00 N/A $308.00 N/A $287.00 $318.00 $334.00 N/A $336.00 N/A $279.00 $312.00 $328.00 $301.00 $334.00 $348.00 $301.00 $334.00 $348.00 $306.00 $338.00 $353.00 $312.00 $345.00 $361.00 N/A $345.00 N/A $310.00 $343.00 $357.00 $412.00 $445.00 $460.00 $384.00 $417.00 $431.00 $384.00 $417.00 $431.00 $343.00 $375.00 $390.00 $446.00 $479.00 $494.00 $314.00 $347.00 $363.00 N/A N/A $363.00 $334.00 $367.00 $382.00 $336.00 $369.00 $384.00 $348.00 $382.00 $396.00 N/A N/A $443.00

N/A N/A $452.00

N/A N/A $503.00

N/A N/A $517.00 $365.00 $398.00 $412.00 $374.00 $408.00 $422.00 $426.00 $460.00 $475.00 $439.00 $471.00 $486.00

Wrought Standard Arm ROWrought Parallel Arm RP9Wrought Universal Arm RUOStandard Arm O, OLC, O8, OZ, OZAStandard Arm - Pocket OP *(Handed)Parallel Arm P3**, P3A, P4**, P4A, P9Standard Heavy Duty Arm O10Parallel Heavy Duty Arm P10Parallel Heavy Duty Drop Arm PD10 ** Universal Arm UOHolder Arm H, H8*, HZ, HZA *(H8 Handed)Parallel Holder Arm PH4, PH9Universal Holder Arm UHParallel Holder Heavy Duty Arm PH10* *(Handed)Standard Holder Heavy Duty Arm H10Parallel Stop Heavy Duty Arm PSCompression Stop Heavy Duty Arm CPSStandard Fusible Link Arm F, F8, FZ, FZA *(Handed)Parallel Fusible Link Arm PF9 *(Handed)Parallel Stop/Holder Heavy Duty Arm PSHCompression Holder Heavy Duty Arm CPSHTrack Arm OT, POTTrack Arm - Pocket Arm OTP *(Handed)Track Holder Arm HT, PHTTrack Bumper Arm OTB, POTBTrack Holder Bumper Arm HTB, PHTBTrack Double Egress Single Step Frame ODS *(Handed)Track Double Egress Single Step Frame w/Bumper ODSB *(Handed)Track Double Egress Single Step Frame w/Holder HDS *(Handed)Track Double Egress Single Step Frame w/Holder HDSB *(Handed)Track Double Egress OD *(Handed)Track Double Egress w/Bumper ODB *(Handed)Track Double Egress w/Holder HD *(Handed)Track Double Egress w/Holder & Bumper HDB *(Handed)

NOTES* Please specify hand when ordering.** Furnished standard with installation data sheet for use with #590 overhead holder. Please indicate on order if alternate data sheet is required.

Surface Closer EB, ED, EN,EP, EAB Finishes

Application 1431 281 351

1431 Series

351 Series

281Series



DC-4DOOR CLOSERS

SPECIALTY CLOSERS

268 O Concealed Track Arm $406.00

268 OB Concealed Track Arm w/Bumper $428.00

268 H Concealed Track Holder Arm $424.00

268 HB Concealed Track Holder Arm w/Bumper $448.00

269 O Concealed Track Arm $446.00

269 OB Concealed Track Arm w/Bumper $469.00

278 O Exposed Standard Arm $344.00

278 H Exposed Holder Arm $370.00

278 F Exposed Fusible Link Arm $453.00

How to order - Example: 268 O EN RH

Concealed Closer EB, ED, EN, EP, EABCloser Series Arm Arm Type - Handed - specify hand when ordering Price

268 CSP Concealed with Track $488.00

268 CSPS Single pole double throw door position switch $537.00

268 CSPD Double pole double throw door position switch $547.00

269 CSP Concealed with Track $545.00

269 CSPS Single pole double throw door position switch $610.00

269 CSPD Double pole double throw door position switch $620.00

281 SSP Parallel Arm, heavy duty $394.00

281 SSO Standard Arm, heavy duty $394.00

281 SSPT Track - pull side $429.00

281 PSSPT Track - push side $429.00

Note: The Security Package on the 281, 268 and 269 Door Closer Series consists of the door closer body, the handed

metal cover or steel top plate, security closer arm or security track, and 6-Lobe security torx screws.

How to order - Example: 281 SSP EN RH

421 CTB Pull Side, Non-Hold Open $335.00

421 CTHB Pull Side, Hold Open $350.00

421 PCTB Push Side, Non-Hold Open $335.00

421 PCHTB Push Side, Hold Open $350.00

How to order - Example; 421 CTB EN RH

Security Package Closers – Complete Closer Package EB, ED, EN, EP, EABCloser Series Arm Arm Type - Handed - specify hand when ordering Price

421 Cam Action Closer EB, ED, EN, EP, EABCloser Series Arm Arm Type - Handed - specify hand when ordering Price

DC-5DOOR CLOSERS

FINISH OPTIONS



Cover and arm 1, 2 Add $281.00 Add $353.00

Cover only 1 $67.00 $77.00

Arm only 1, 2 $215.00 $276.00

Finish Plate (268, 269, 278 Series) 04, 10B, 26D only $67.00 (4, 26D) $77.00 (10B only)

Brackets and Mounting Plates – Ordered Separately $67.00 $77.00

Custom powder coat 1, 3 (Provide sample to factory for available colors and price.)

Set-up charge per color 1, 3 $146.00 per order/per color

Spray paint to match SARGENT standard colors (12 cans per case, all one color) $361.00 p/case

Notes

1. Closers/Cover

A. All plated closers are supplied with metal covers which are handed. Specify RH or LH for handing.

B. SRI (rust inhibiting process) not available with plated finishes

C. For items or finishes not listed, consult factory for availability and pricing.

D. Addition for metal cover is included in the plating charges.

2. Arms

A. RO, RP9 and RUO arms are not available in plated finishes.

B. Track arms and fusible link arms cannot be plated.

3. Custom Powder Coat

A. Handed metal covers must be used for powder coat finishes. Please indicate RH or LH.

B. Addition for metal cover is included in the powder coat charges.

C. The factory must be supplied with a color sample to match.

D. All powder coat finish must be approved by the factory prior to ordering.

Please note what finish option is required, if not spelled out plated cover only will be shipped.

Ex: 1 ea. 351 O x 03 x RH – Cover and Arm will be plated US3

1 ea. 351MC O x 03 x LH – Cover will be plated US3, Arm will be painted EAB

Finish Options with Door Closers

1431, 268, 269, 278, 281, 421, 351 Series Closers Finish

Description 4, 10, 15, 26D 3, 9, 10B, 10BL, 20D, 26

How to Order Plated Closers

Suffix

CPC Clear Powder Coat over 26D – How to order: 351 x O x 26D x CPC Add $73.00

MPC Bright Metallic Powder Coat finish – How to Order: 35 x O x MPC Add $46.00

MPC Set-up charge $78.00 per order

Notes: All CPC and MPC orders will be handled as a special. Discounts do not apply.

Special Finish Options

DC-6DOOR CLOSERS

ACCESSORIES



Corner Bracket 281W, 1431W $68.00Mounting Plate 351A, 351B, 281B, 1431B $51.00Drop Plate 281D, 351D, 1431D $51.00Flush transom bracket for PS, PSH, P10, CPS, CPSH PH10 Arms 125VF $48.00Support bracket for PS, PSH, P10, PH10, CPS, CPSHarms on narrow frame 125V $30.00Blade stop spacer kit for P9, PH9, PF9 Arms 581-1 $32.00Blade stop spacer kit for P10, PS, PSH, CPS, CPSH, PH10 Arms 581-2 $55.00Spacer block for single screw 63-0191 $17.56 (Not finished)Cover Plate 281J, 281J-2, 1431J $34.00Hold Open Kit – for channel type 63-3903 $37.19 (Not finished)Hold Open Kit w/Bumper – for channel type 63-3904 $58.45 (Not finished)Arms Only 351, 281, 1431 Series (Includes Arm Screw Pack)

ApplicationStandard Wrought Arm (fits 1431 Series only) 25RO $72.00Parallel Wrought Arm (fits 1431 Series only) 25RP9 $72.00Standard Arm 25O, OLC, O8, OZ, OZA, OP $81.00Parallel Arm 25P3, P3A, P4, P4A, P9 $81.00Standard Heavy Duty Arm 25O10 $81.00Parallel Arm Heavy Duty 25P10 $93.00Parallel Heavy Duty Drop Arm 25PD10 $110.00Universal Arm 25UO $86.00Holder Arm (H8-Handed) 25H, H8, HZ, HZA $108.00 Parallel Holder Arm 25PH4, PH9 $108.00Universal Holder Arm 25UH $112.00Parallel Holder Heavy Duty Arm (Handed) 25PH10 $119.00Standard Holder Heavy Duty Arm 25H10 $119.00Parallel Stop Heavy Duty Arm 25PS $116.00Compression Stop Heavy Duty Arm 25CPS $219.00Standard Fusible Link Arm (Handed) 25F, F8, FZ, FZA $190.00Parallel Fusible Link Arm (Handed) 25PF9 $190.00Parallel Stop/Holder Heavy Duty Arm 25PSH $150.00Compression Holder Heavy Duty Arm 25CPSH $254.00

Complete Track Type Arms Includes Arm and Channel (351, 281, 421, 1431 Series)Track Type Arm 25OT, POT, OTP $122.00Pull Side/Push Side Non-hold Open Arm (Handed) 25CTB, PCTB $179.00 Pull Side/Push Side Hold Open Arm (Handed) 25CTHB, PCHTB $212.00Track Type Arm/Holder Arm 25HT, PHT $141.00Track Type Arm 25OTB, POTB $144.00 Track Type Arm/Holder Arm 25HTB, PHTB $155.00Track Double Egress Single Step Frame Arm *(Handed) 25ODS $203.00 Track Double Egress Single Step Frame w/Bumper Arm *(Handed) 25ODSB $212.00 Track Double Egress Single Step Frame w/Holder Arm *(Handed) 25HDS $263.00 Track Double Egress Single Step Frame w/Holder Arm *(Handed) 25HDSB $277.00Track Double Egress Arm (Handed) 25OD $172.00Track Double Egress Arm w/Bumper (Handed) 25ODB $182.00Track Double Egress Arm w/Holder (Handed) 25HD $234.00Track Double Egress Arm w/Holder & Bumper (Handed) 25HDB $244.00Regular arm conversion units- 351, 281, 1431 SeriesParallel Arm Foot 125P9, PH9 $20.00 Ea.Parallel Arm Foot 125P3, P4, 125PH4 $30.00 Ea.

Parallel Arm Foot 125P3A, P4A $34.00 Ea.

Inverted Arm Foot 125OZ, OZA $40.00 Ea.

Accessories and Components of Door Closers FinishesDescription Part Number EB, ED, EN, EP, EAB

DC-7DOOR CLOSERS

COMPONENTS



Components of Door Closers

Standard- High Impact Non-Corrosive Cover Non-Handed FINISH

Closer Series Part # EB, ED, EN, EP, EAB

351 351C

281 281C $24.00 Each

421/1431 1431C

Metal Covers (Handed–specify RH or LH)

351 *351CMC

281 *281CMC$37.00 Each

1431 *1431CMC

421 *421CMC

*NOTE: When ordering metal covers only, specify arm type.

Closer Bodies Only EN

351 13-351 $240.00

281 13-281 $226.00

278 x RH 13-278 x RH $262.00

278 x LH 13-278 x LH $262.00

268 x RH 13-268 x RH $284.00 Each

268 x LH 13-268 x LH $284.00

269 x RH 13-269 x RH $324.00

269 x LH 13-269 x RH $324.00

1431 13-1431 $193.00

421 13-421 $309.00

585 Retro Fit Kits (for upgrading 1230 to 1431 closers)

585-1 Replaces 1230$193.00 Each

585-2 Replaces 1231

585-3 Replaces 1230-DA$224.00 Each

585-4 Replaces 1231-DA

586 Retro Fit Kits (for upgrading 250/1250 to 281 closers)

586-1 Replaces 250-DA/1250-DA $258.00 Each

586-2 Replaces 250 w/Advanced Backcheck $243.00 Each

586-3 Replaces 250, 251,1250 and 1251 $227.00 Each

NoteRetro fit kits include: closer, closer cover, mounting screws for closer body and in addition for 281 Series closer, a closer bodymounting bracket.

DC-8DOOR CLOSERS

1331/1130 SERIES



1130 Series Door Closer – Regular, Parallel and Top Jamb Mount Finish

Description Arm EB, EN, EAB

Standard Arm - 1130 RU (Adjustable size 3-6)

1131 RU (Adjustable size 1-4)$176.00

1132 RU Size 2

1133 RU Size 3

1134 RU Size 4$176.00

1135 RU Size 5

Holder Arm - 1130 HU (Adjustable size 3-6)

1131 HU (Adjustable size 1-4)$201.00

1132 HU Size 2

1133 HU Size 3

1134 HU Size 4$201.00

1135 HU Size 5

NOTE: Supplied Standard with machine screws and Mortise Nuts for 1-3/4" doors and self-tapping screws.

NOTE: Arms unique to 1130 Series Door Closers

Closers packed to mount as parallel arm, top jamb, or standard mount.

Accessories

Long Rod Assembly 11RZ (For top jamb applications reveals from 2-1/4" to 5-3/4") $10.00 Add

Cover Specify “C” Suffix for Slimline Cover $14.00 Add

Example: 1130C RU EN

60-0535 Cover ordered separately for 1130 Closer $14.00 Each

1331 Series Door Closer Finish

Description Arm EB, ED, EN, EP, EAB

Standard Arm - 1331 JO (Adjustable size 1-6)

1331 JP9 (Adjustable size 1-6)$249.00

1331 JUO (Adjustable size 1-6) $253.00

Holder Arm - 1331 JH (Adjustable size 1-6)

1331 JPH9 (Adjustable size 1-6)$274.00

1331 JUH (Adjustable size 1-6) $279.00

NOTE: Arms unique to 1331 Series Door Closers

1331 Closer – Parts & Accessories

Description Part Number Price

Mortise Nuts – When Ordered w/Closer – No Charge 4TB $5.30

Drop Plate – For Parallel Arm 1331D $51.00

Mounting Plate (Top Jamb) 1331B $51.00

Standard Cover, High Impact, Non-Corrosive 1331C $18.00

Body Only 13-1331 $173.00

Standard/Top Jamb Arm 25JO $76.00

Parallel Arm 25JP9 $76.00

Standard/Top Jamb Hold Open Arm 25JH $102.00

Parallel Hold Open Arm 25JPH9 $102.00

Parallel Arm Bracket; Converts JO to JP9 125JP9 $18.00

Parallel Arm Bracket; Converts JH to JPH9 125JPH9 $18.00

Screw Pack for all 1331 Arms 61-2765 $10.33

DC-9DOOR CLOSERS

PARTS



01-0134 Machine screw #8-32 x 13/16" $0.2201-0287 Set Screw (used w/63-3905) $0.4901-0864 Hole Plug (PS/PSH Arm) $1.3301-0977 Retaining Ring $0.6801-1028 Machine screw #8-32 x 1/4" $0.6001-1140 Screw for “O” Arm Pivot $0.68

* 01-1143 12-24 x 5/8" Screw $0.6801-1157 Cover Screw 8-32 x 1-1/4" $0.2601-1190 Steel Screw $1.24

* 01-1191 Pan Hd Screw 10-24 x 3/8" $0.68* 01-1206 Cover Screw 8-32 x 5/16" $0.54

01-1248 Machine Screw 12-24 x 1-5/16" $1.2101-1463 Adjusting Rod Screw $1.46

* 01-2300 12 x 1-1/2" Wood Screw $0.6801-2303 12 x 2-1/2" Wood Fl Hd Screw $1.4201-2306 Wood Flat Hd Screw #12 x 3" $1.4701-3438 12-24 x 1-3/4" Track Mtg. Screw $1.2101-3440 Flat Hd Screw 12-24 x 2-1/4" $1.21

* 01-3458 Flat Hd Screw 1/4-20 x 2-1/2" $1.24* 01-3595 Screw 8-32 Unf x 1/4" $0.71

01-4411 Screw 12-24 x 3/8" $0.5201-4451 Screw 10-24 x 3/8" $1.2401-4503 #12-24 x 3/8" Pan Head Screw $7.83

* 01-9063 Washer Spindle $0.1201-9118 Self drilling tapping case mounting screw $0.2201-9120 Self drilling tapping case mounting screw $0.40

* 01-9145 Screw (pivot) $1.4661-0007 165 Degree Fusible Link – replacement $15.8161-0010 135 Degree Fusible Link – replacement $15.8161-0211 Friction Disc (PH Arms) $1.9961-0293 Bushing $3.9961-0294 Washer $0.53

* 61-0308 Swivel Arm Screw $1.60* 61-2303 Foot Asy. (H, HZ, HZA, PH4, PH9, UH-Arms) $71.06* 61-2761 JO Main Arm Assy. $31.93* 61-2762 JH Main Arm Assy. $31.93* 61-2765 Screw Pack $10.33

63-0088 H.O. Channel $59.5263-0085 Regular O Channel $45.88

* 63-0157 Channel – OT/OTB/HT/HTB $102.27* 63-0159 Channel - POT/POTB/PHT/PHTB $89.40

63-0191 Spacer (5th hole) $15.48* 63-0211 Stop Only $13.16

63-0377 Bumper $16.6163-0396 Bumper stop $3.33

* 63-0516 $71.0663-0555 Mounting Bracket $18.9963-0574 Faceplate for 268 $73.0663-0596 268 Cam $8.04

* 63-0627 Double egress arm LH $57.47* 63-0628 Double egress arm RH $57.47* 63-0641 Heavy Duty – Main Arm $31.62

63-0678 Spring support $3.99* 63-0682 Track End Cap $7.84

63-0694 Hex Wrench for Heavy Duty Arm $4.38* 63-0700 Pivot $5.70

63-2063 Spring slide assy. $86.74* 63-2189 Main Arm Assy. $99.61

* 63-2212 Swivel Arm/Connection Assy. $19.93* 63-2213 Swivel arm - OZ $33.21* 63-2214 Swivel arm - OZA $33.21* 63-2216 Foot Asy. (O, OLC, RO, UO, RUO-Arms) $31.62* 63-2217 Foot Asy. (OZ-Arm) $39.45* 63-2218 Foot Asy. (OZA, FZA-Arms) $39.45* 63-2229 Main Arm & Swivel Asy.

(H, H8, PH4, PH9, PF9, UH-Arms) $55.26* 63-2230 Main Arm & Swivel Asy. (HZ-Arm) $55.26* 63-2231 Main Arm & Swivel Asy (HZA-Arm) $55.26* 63-2240 Main Arm & Link Asy. LH (F-Arms 160) $276.15* 63-2241 Main Arm & Link Asy. RH (F-Arms 160) $276.15* 63-2242 Main Arm & Link Asy. LH (F-Arms 125) $276.15* 63-2243 Main Arm & Link Asy. RH (F-Arms 125) $276.15* 63-2245 Foot Bracket LH (PF9-Arm) $197.23* 63-2246 Foot Bracket RH (PF9-Arm) $197.23* 63-2270 Foot Asy. (P3-Arm) $55.26* 63-2271 Foot Asy. (P9, RP9-Arms) $18.99* 63-2272 Foot Asy. (P4A-Arm) $71.06* 63-2273 Foot Asy. (F8, O8-Arms) $47.28* 63-2274 Foot Asy. (P3A-Arm) $55.26* 63-2289 Foot Asy. LH (H8-Arm) $89.40* 63-2290 Foot Asy. RH (H8-Arm) $89.40* 63-2295 Foot Asy. (P4-Arm) $63.10* 63-2391 Screw Pack $18.99

63-2392 Screw Pack $18.99* 63-2396 Screw Pack (Stop & Spacer Pack – PS & PSH) $20.46* 63-2398 Screw Pack (CPS) $55.80* 63-2444 (POT) Track Assy. Only $173.61* 63-2445 (PHT) Track Assy. Only $189.39* 63-2447 (OT) Track Assy. Only $173.61* 63-2448 (HT) Track Assy. Only $189.40* 63-2465 Arm for Track Mounting (Less Roller),

(Used w/63-3905) $86.06* 63-2468 Foot Assy. (F-Arm) $39.45

63-2487 Ft. Brkt and Bdy Asy (LH) $161.1963-2488 Ft. Brkt and Bdy Asy (RH) $161.19

* 63-2549 Main Arm & Link Asy. (OLC-Arm) $47.28* 63-2607 Main Arm & Link Asy. (O, O8, OZ, OZA, P3,

P3A, P4A, P9, RP9, UO-Arms) $39.4563-2868 Smoke Detector $12.8963-3264 Channel assy. -268 OB $124.0063-3265 Channel assy. - 268 H $178.5663-3266 Channel assy. - 268 HB $200.8763-3394 Main Arm Assy - 280 RH $58.4463-3995 Main Arm Assy 280- LH $58.4463-3413 Switch and Plug Assembly $68.1363-3481 Screw Pack – for 281 “O” Arm $7.18

* 63-3482 Track Screw pack $8.95* 63-3487 CPSH arm mounting screw pack $61.99

63-3493 Bumper Only (CPS, CPSH-Arms) $39.4563-3620 268/278 Base Plate Asy. CPS $94.68

* 63-3623 268 LH Case Assy. CSPS $398.47* 63-3624 268 RH Case Assy. CSPS $398.47* 63-3625 268 LH Case Assy. CSPD $451.60* 63-3626 268 RH Case Assy. CSPD $451.60

63-3640 268 Screw Pack $11.4963-3641 268 CSP/CSPS/CSPD Screw Pack $59.89

Part No. Description Price Part No. Description Price

* Price listed are for painted finishes or non finishes. For plated finishes, please refer to page DC-5 for finish add.

DC-10DOOR CLOSERS

PARTS



63-3642 Screw Pack $19.76 63-3684 351 “O” Screw Pack $3.99

* 63-3656 Main arm assy LH $59.77* 63-3657 Main arm assy RH $59.77* 63-3727 P10 Arm & Brax $71.06

63-3788 Ball Insert Asy. - CPSH $11.02* 63-3830 CPS Brax & Arm Asy. $187.00* 63-3833 PSH Brax & Arm Asy. $126.17* 63-3835 SP10 H/D Arm Asy. $168.03* 63-3836 CPSH Arm & Brax $187.00* 63-3837 PS H/D Brax & Arm Asy. $75.71* 63-3839 PH10 Arm & Brax – LH $94.68* 63-3840 PH10 Arm & Brax – RH $94.68* 63-3901 Track Arm Asy. (to be used w/63-3905) $55.26

63-3905 Roller Asy. (used w/01-0287) $9.0363-3906 Security Roller $11.5563-3923 268/281 Screw Pack (PSSPT) $33.2163-3924 268/281 Screw Pack (SSPT) $39.8563-3925 268/281 Screw Pack (SSP) $37.1863-4332 Extended Wiring Harness $37.13 63-4335 268 CSPS/CSPD Circuit Tester $55.1263-4337 CTB Track Asy $104.00 63-4338 CTHB Track Asy $137.28 63-4339 PCTB Track Asy $104.00 63-4340 PCHTB Track Asy $137.28 63-4347 PCT Arm Asy - LH $74.88 63-4348 PCT Arm Asy - RH $74.88 63-4349 CTB Track & Pin Asy $83.20 63-4350 PCTB Track & Pin Asy $83.20

* 64-0023 (O) Foot (Only) $18.99* 64-0025 (O) Pivot (Only) $6.25

64-0026 Bearing $2.00* 64-0050 Foot Bracket (PH4-Arm) $47.28

64-0175 Plastic Cover Support Spacer-1431 $1.2164-0180 Plastic Support for metal cover $3.3364-2407 Screw Pack (1431-0) $18.9964-2408 Screw Pack-Track Type $18.9964-2409 Screw Pack (1431) $15.81

* Price listed are for painted finishes or non finishes. For plated finishes,please refer to page DC-5 for finish add.

Part No. Description Price

Overhead Door Holders & Stops Prefixes

Prefix # Description Price

SG MicroShield™ an anti-microbial powder coat (not available with: EB, ED, EN, EP, EAB) Add $21.00

31 For Doors more than 1-3/4" up to 2-1/4" thick – specify thickness when ordering No Add

36 Torx Security Machine Screws for door 1-3/4" Thick ONLY Add $19.00

Overhead Door Holders & Stops EB, ED, EN 3, 4, 9, 10, 10BL

Catalog Number EP, EAB 10B, 26D 15, 20D, 26

597 thru 599 Add Suffix H or S (Surface Mount) $253.00 $278.00 $326.00

697 thru 699 Add Suffix H or S (Concealed Mount) $249.00 $274.00 $321.00

H-Hold-open w/stop S-Stop only

1536 thru 1539 Add Suffix F, H, or S (Concealed Mount) $113.00 $131.00 $149.00

1546 thru 1549 Add Suffix F, H, or S (Surface Mount) $122.00 $142.00 $159.00

F-Friction type holder H-Non-friction type Stop & Holder S-Stop only

Overhead Door Holders & Stops Accessories

145 Angle Bracket for 1540 Series $25.00 $31.00 $36.00

195 Angle Bracket for 590 Series (handed) $36.00 $44.00 $48.00

21-0104 Jamb Bracket Shim for 590 - 1/4" thick – order screws separately $19.88 $25.19 $30.48

01-3454 1/4-20 x 1-1/4" Machine Screw - used w/21-0104 Bracket $1.78 $1.78 $1.78

21-0198 Jamb Bracket Shim for 1540 - 1/4" thick – order screws separately $14.57 $19.88 $25.19

01-3436 12-24 x 1-1/4" Machine Screw - used w/21-0198 Bracket $1.33 $1.33 $1.33

21-0396 690H Turn Lever, for doors up to 1-1/4" thick $4.83 $9.64 $12.05

21-0397 690H Turn Lever, for doors 1-3/4" – 2-1/4" thick $7.23 $12.05 $14.47

21-0079 590 Thrubolt for 1-1/4" – 2" Door $2.88 $2.88 $2.88

21-2019 1530 Series “H”, “S”, “F” Screw Pack $6.03 $6.03 $6.03

21-2031 1540 Series “H”, “S”, “F” Screw Pack $25.30 $30.12 $34.93

21-2263 690 Series “H” Screw Pack for 1-3/4" Dr. $21.69 $26.50 $31.32

21-2267 690 Series “S” Screw Pack for 1-3/4" Dr. $14.47 $14.47 $14.47

21-2302 590 Series “H” & “S” Screw Pack for 1-3/4" – 2" Dr. $14.47 $19.28 $24.11

Specify finish when ordering.

For Overhead Holders & Stops Only:

Suffix

CPC Clear Powder Coat over 26D – How to order: 597S x 26D x CPC Add $73.00

All orders will continue to be handled as a “special” when CPC is required Discounts Do Not Apply

HS-1HOLDERS & STOPS

*

*

*

*

*

*

*

*



HS-2HOLDERS & STOPS

Electromagnetic Door Holder

Part # Description Finish Price

1560 Wall Mount, Surface Applied Wiring EN $249.00

1561 Wall Mount, Concealed Wiring (in a junction box) EN $238.00

1562 Floor Mount, Single Door EN $425.00

1563 Floor Mount, Double Door EN $555.00

Part # Parts & Accessories Description Finish Price

52-0302 Surface Mounting Box EN $81.87

52-0303 Wall Cover EN $56.58

52-0304 Magnet Housing Cover - Single Floor EN $284.10

52-0305 Magnet Housing Cover - Double EN $397.26

52-0306 Magnet Support Bracket $27.70

52-0307 Magnet Housing Base, Single Floor EN $173.36

52-0308 Magnet Housing Base, Double Floor EN $255.21

52-0309 Floor Gasket $18.05

52-2570 Magnet - Wall Mount $150.48

52-2571 Magnet - Floor $128.80

52-2572 Door Armature $101.12

52-2573 Extension & Screw EN $93.90

52-2574 Screw Kit (for 1561) EN $25.28

52-2575 Screw Kit (for 1560) EN $25.28

52-2576 Screw Kit - Single Floor EN $67.41

52-2577 Screw Kit - Double Floor EN $84.27



EXIT DEVICES

TABLE OF CONTENTS



EXIT DEVICES

How to Order/ANSI Finish & Function Comparison.................ED-1

20 Series

20 Series Prefixes ....................................................................ED-2

20 Series Reversible SVR & Rim Device.................................ED-3

30 Series

30 Series Prefixes ....................................................................ED-4

30 Series Reversible SVR & Rim Device.................................ED-5

9898 Series

9898 Series Prefixes ................................................................ED-6

9898 Reversible Rim Device ....................................................ED-7

8888 Series

8888 Series Prefixes ................................................................ED-8

8888 Reversible Rim Exit Device.............................................ED-9

80 Series8300 Series Prefixes ..............................................................ED-10

8300 Series Narrow Mortise Device ......................................ED-11

8400 Series Prefixes ..............................................................ED-12

8400 Series Narrow Concealed Vertical Rod.........................ED-13

12-MD8400 Series Prefixes ...................................................ED-14

12-MD8400 Series Fire-Rated Narrow Concealed Vertical Rod .............................................ED-15


8500 Series Narrow Rim Device............................................ED-17

MD8600 Series Prefixes ........................................................ED-18

MD8600 Series Concealed Vertical Rod – Metal Door..........ED-19

WD8600 Series Prefixes ........................................................ED-20

WD8600 Series Concealed Vertical Rod – Wood Door .........ED-21

SP, PP, PR8600 Series Prefixes ............................................ED-22

SP, PP, PR8600 Series Concealed Vertical Rod – Center Top Latch....................................................................ED-23

LS, LP, LR8600 Series Prefixes .............................................ED-24

LS, LP, LR8600 Series Concealed Vertical Rod – Low Profile .............................................................................ED-25


8700 Series Surface Vertical Rod ..........................................ED-27

NB8700 Series Prefixes .........................................................ED-28

NB8700 Series Surface Vertical Rod, No Bottom Rod ..........ED-29

FM8700 Series Prefixes.........................................................ED-30

FM8700 Series-Surface Vertical Rod-Complies with FEMA 361 ..............................................................................ED-31

SP, PP, PR8700 Series Prefixes ............................................ED-32

SP, PP, PR8700 Series Surface Vertical Rod – Center Top Latch....................................................................ED-33


8800 Series Rim ....................................................................ED-35


8900 Series Mortise...............................................................ED-37

90 Series


9400 Series Narrow Stile Concealed Vertical Rod ................ED-39

9700 Exit Prefixes ..................................................................ED-40

9700 Series Surface Vertical Rod ..........................................ED-41


9800 Series Rim ....................................................................ED-43


9900 Series Mortise...............................................................ED-45

Trim

ET Lever Control Trim ............................................................ED-46

Freewheeling ET Lever Control Trim......................................ED-47

ET Lever Control Trim Coastal Series Design .......................ED-48

Freewheeling ET Lever Control Trim Coastal Series Design ...........................................................ED-49

Studio Collection-Metro Elements

ET Lever Control Trim Studio Collection-Metro Elements......ED-50

Freewheeling ET Lever Control Trim Studio Collection-Metro Elements ......................................................................ED-51

Pull & Thumbpiece Trim .........................................................ED-52

Dummy Rails/AVT Trim, Aux Control Trim, PRK Trim.............ED-53

Mullions & Accessories

Mullions & Accessories ..........................................................ED-54

Accessories............................................................................ED-55

Accessories............................................................................ED-56

Strikes ....................................................................................ED-57

EXIT DEVICES

TABLE OF CONTENTS



Parts

01-0005 to 28-2029................................................................ED-58

28-2066 to 68-0775................................................................ED-59

68-0777 to 68-2274................................................................ED-60

68-2291 to 68-2792................................................................ED-61

68-2793 to 68-3098................................................................ED-62

68-3099 to 68-4077................................................................ED-63

68-4078 to 68-4665................................................................ED-64

68-4666 to 94-0088................................................................ED-65

94-0092 to 97-0362................................................................ED-66

97-0367 to 99-0208................................................................ED-67

99-0212 to 99-2389................................................................ED-68

P888 Series

P888 Series Reversible Rim Exit Device Prefixes .................ED-70

P888 Series Reversible Rim Exit Device ...............................ED-71

P800 Exit Device

P800 Series Exit Device Prefixes ..........................................ED-72

P800 Series Exit Device ........................................................ED-73

ED-1EXIT DEVICES

GENERAL INFORMATION




Function Finish

SARGENT ANSI SARGENT ANSI Description

10 01 US3 605 Polished Brass

28 01 US4 606 Satin Brass

88 01 US9 611 Polished Bronze

98 01 US10 612 Satin Bronze

10-DT 02 US10B 613 Oxidized Satin Bronze/Oil Rubbed

28-DT 02 US10BL —— Oxidized Satin Bronze/Lacquered

88-DT 02 US15 619 Satin Nickel Plate

98-DT 02 US20D —— Dark Statuary Bronze Powder Coated

04 03 US26 625 Polished Chrome

10-DT (16-Prefix) 04 US26D 626 Satin Chrome

88-DT (16-Prefix) 04 US32 629 Polished Stainless Steel

63 05 US32D 630 Satin Stainless Steel

62 06 EB —— Powder Coated to match 10B

66 07 ED —— Powder Coated to match 20D

13 08 EN —— Powder Coated to match US28

06 09 EP —— Powder Coated to match 10

16 10 ED —— Sprayed to match 20D

10 x Auxiliary Control (13) 11 EAB —— Powder Coated Satin Brass Enamel

10 x Auxiliary Control (06) 12

How To Order



Prefix Consult proper section for prefixes available 10 Ea. 12-

Series 20, 30, 80, 90 10 Ea. 12-87

Function Consult proper section for functions available 10 Ea. 12-8713

Rail Size E, F, J, G, Consult catalog for description 10 Ea. 12-8713 G

Trim Consult proper section for trims available 10 Ea. 12-8713 G ETL

Thru Bolts If required 10 Ea. 12-8713 G ETL TB

Strike Specify if other than standard 10 Ea. 12-8713 G ETL TB 653

Hand Consult proper section for handing required 10 Ea. 12-8713 G ETL TB 653 RHR

Finish Consult proper section for finishes available 10 Ea. 12-8713 G ETL TB 653 RHR 32D

Misc. Options Consult proper section for options available 10 Ea. 12-8713 G ETL TB 653 RHR 32D x 7'6" Door Ht.

Split Finishes Specify outside finish first 10 Ea. 12-8813 F ETL US10B/32D RHR



ED-2EXIT DEVICES

20 SERIES PREFIXES

PrefixNumber Description Price10 SARGENT Signature System Add $34.00 /cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 /cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, SC, SE, prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $121.00 16 Cylinder lockdown feature Add $94.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.*60 SARGENT Removable disposable construction core No addition *63 SARGENT Removable core cylinder-Includes MK and GMK charges Add $44.00 /cyl.*64 SARGENT Removable construction core cylinder See CK-2 *6573 Small Format 6-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.*65737P Small Format 7-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.*70 Small Format Interchangeable disposable plastic construction core No addition *72 Small Format Interchangeable construction core (7-pin with 11 prefix) See CK-2 *73 Small Format 6-Pin Interchangeable core (refer to CK-8 for available Keyways) Add $40.00 /cyl.*737P Small Format 7-Pin Interchangeable core (refer to CK-8 for available Keyways) Add $40.00 /cyl.BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only & Lever Trim Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only & Lever Trim Only) No addition

*Note: For lever trim listed on ED-3 only.

Vertical Rod Device to 96" Height No addition

Concealed/Surface Vertical Rod Device over 96" to 120" Height Add $50.00

Refer to catalog for max. door height availability on fire rated exit devices.



ED-3EXIT DEVICES

20 SERIES

Less Trim Finish

Device EN, EB, ED, EP, EAB

2727 786.00

2828 420.00

20 Series Trim Finish

Function * Note:For use with 2828 Device only Trim 3, 4, 10, 10B, 20D, 26D EN, EB, ED, EP, EAB

28C Key locks/Unlocks trim (13) LL, LP, LB

28D Dummy Trim (lever) (10) LL, LP, LB 202.00

28K Key retracts Latchbolt (04) LL, LP, LB

28L Trim always operable (15) LL, LP, LB

28N Key operates lever (06) LL, LP, LB

28C Key locks/Unlocks trim (13) OB

28K Key retracts latchbolt (04) OB 131.00

28L Trim always operable (15) OB

28D Dummy Trim (pull) GTB 57.00

28E Blank Plate GTB 55.00

28K Key retracts latchbolt (pull) HTB 112.00

Thru Bolt Application Pack Part # Finish

No. Bolts per Pack 1-3/4" Dr. 2-1/4" Dr. 10B, 26D

2828, 12-2828 4 28-2024 28-2025 17.76 Pack

2727 14 28-2031 28-2032 62.16 Pack

12-2727 16 28-2087 28-2088 71.04 Pack

Thru Bolts ordered with device 4.44 Each

2727 Reversible Vertical Rod Devices 2828 Reversible Rim Device

2828 2727

Thumbpiece Trim (not retrofittable to Exits shipped prior to February 25, 2000) EN, EB, EAB

28D Dummy Trim TP 77.00

28C Key locks/unlocks thumbpiece TP 182.00

28K Key retracts latch TP 168.00

28L Trim always operable TP 93.00

*

*

*

*

ED-4EXIT DEVICES

30 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 /cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 /cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, SC, SE, prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $121.00 16 Cylinder lockdown feature Add $94.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.55 Signal Switch in Rail Add $183.00 *60 SARGENT Removable disposable construction core No addition *63 SARGENT Removable core cylinder-Includes MK and GMK charges Add $44.00 /cyl.*64 SARGENT Removable construction core cylinder See CK-2 *6573 Small Format 6-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.*65737P Small Format 7-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.*70 Small Format Interchangeable disposable plastic construction core No addition *72 Small Format Interchangeable construction core (7-pin with 11 prefix) See CK-2 *73 Small Format 6-Pin Interchangeable core (refer to CK-8 for available Keyways) Add $40.00 /cyl.*737P Small Format 7-Pin Interchangeable core (refer to CK-8 for available Keyways) Add $40.00 /cyl.BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.NB No Bottom Rod for 3727 Devices No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only & Lever Trim Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only & Lever Trim Only) No addition

*Note: For lever trim listed on ED-5 only.




ED-5EXIT DEVICES

30 SERIES



Less Trim Finish

Device EN, EB, ED, EP, EAB

3727 580.00

3828 309.00


Function * Note: For use with 3828 Device only Trim 3, 4, 10, 10B, 20D, 26D EN, EB, ED, EP, EAB

28C Key locks/Unlocks trim (13) LL, LP, LB

28D Dummy Trim (lever) (10) LL, LP, LB 202.00

28K Key retracts Latchbolt (04) LL, LP, LB

28L Trim always operable (15) LL, LP, LB

28N Key operates lever (06) LL, LP, LB

28C Key locks/Unlocks trim (13) OB

28K Key retracts latchbolt (04) OB 131.00

28L Trim always operable (15) OB

28D Dummy Trim (pull) GTB 57.00

28E Blank Plate GTB 55.00

28K Key retracts latchbolt (pull) HTB 112.00


No. Bolts per Pack 1-3/4" Dr. 2-1/4" Dr. 10B, 26D

3828, 12-3828 4 28-2024 28-2025 17.76 Pack

3727 14 28-2031 28-2032 62.16 Pack

12-3727 16 28-2087 28-2088 71.04 Pack


3727 Reversible Vertical Rod Devices 3828 Reversible Rim Device

38283727

Thumbpiece Trim EN, EB, EAB

28D Dummy Trim TP 77.00

28C Key locks/unlocks thumbpiece TP 182.00

28K Key retracts latch TP 168.00

28L Trim always operable TP 93.00

*

*

*

*



ED-6EXIT DEVICES


PrefixNumber Description Price10 SARGENT Signature System Add $34.00 /cyl.10UL SARGENT Signature Cylinders meeting UL437 (Mortise & Cylinders only) Add $48.00 /cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO prefixes) No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder (includes MK and GMK charges) Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 /cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 /cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 /cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 /cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (not available w/10, 22, 30, 60, 63, 64, 70, 72, 73,

737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SG MicroShield™ an antimicrobial powder coat (Not Available with 10B finish) Add $52.00

SuffixCPC Clear Powder Coat – Recommended for exit devices used in full exterior application and

highly corrosive areas with 32 and 32D finishes. How to order: 9898 x 32D x CPC – Discounts do not apply. Add $100.00

Notes:

Reinforced Crossbar (90 Series) Add 63.00

Center Bearing Bracket for door 48" and over when ordered with Device (90 Series) Add 188.00

Thru bolts not supplied as standard; $4.44 per bolt when ordered with exits

ED-7EXIT DEVICES

9898 REVERSIBLE RIM DEVICE



Less Trim Finish

Device 10, 10B, 32D 3, 4, 9, 10BL 20D, 32

9898 1,106.00 1,341.00 1,341.00


Function Trim 10, 10B, 26D 3, 4, 9, 10BL 20D, 26, 32, 32D

98K Key retracts latchbolt PTB,STS $253.00 $253.00 $253.00

98T Key locks/Unlocks thumb pc. PTB,STS $ 253.00 $253.00 $253.00

98D Dummy Trim PTB,STS $ 253.00 $253.00 $253.00

98E Blank Plate PTB $119.00 $119.00 $119.00

9898 Reversible Rim Device

9898



ED-8EXIT DEVICES


PrefixNumber Description Price10 SARGENT Signature System Add $34.00 /cyl.

10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 /cyl.

11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, SC, SE, V-10 prefixes) No addition

1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition

11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2

11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.

12 UL Fire Label Exit Devices Add $127.00

16 Cylinder Lockdown Feature Add $94.00

19 80 Series Pushbar Without Lexan Touchpad No addition

21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.

22 SARGENT Construction Key System (split key) Add $10.00 /cyl.

43 Flush End cap No addition

*60 SARGENT Removable disposable construction core No addition

*63 SARGENT Removable core cylinder-Includes MK and GMK charges Add $44.00 /cyl.

*64 SARGENT Removable construction core cylinder See CK-2

*6573 Small Format Interchangeable 6-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.

*65737P Small Format Interchangeable 7-Pin uncombinated core (refer to CK-8 for available Keyways) Add $31.00 /cyl.

*70 Small Format Interchangeable disposable plastic construction core No addition

*72 Small Format Interchangeable 6-Pin construction core (7-pin with 11 prefix) See CK-2

*73 Small Format Interchangeable 6-Pin core (refer to CK-8 for available Keyways) Add $40.00 /cyl.

*737P Small Format Interchangeable 7-Pin core (refer to CK-8 for available Keyways) Add $40.00 /cyl.

BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.

GL Guarded Latch Add $26.00

PL SARGuide™ PL-Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00

SC Schlage C Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only & 88C/K Trims) No addition

SE Schlage E Keyway Cylinder 0-Bitted (Rim & #41 Mortise Cylinder Only) & 88C/K Trims) No addition

SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00

VA Sargent V10 Cylinder See V10 Cylinder Section

VC Sargent V10 Cylinder See V10 Cylinder Section

VS Sargent V10 Cylinder See V10 Cylinder Section

VCVS Sargent V10 Cylinder See V10 Cylinder Section

SuffixCPC Clear Powder Coat – Recommended for exit devices used in full exterior application and

highly corrosive areas with 32 and 32D finishes. How to order: 8888F x 32D x CPC – Discounts do not apply. Add $100.00

Notes:80 Series 700-ET, 88-LL, LB, LJ, LP Trims Not Available in Stainless Steel.

Thru bolts not supplied as standard, Add $4.44 per bolt when ordered with exits.

*For lever trim listed on ED-9 only.



ED-9EXIT DEVICES

8888 REVERSIBLE RIM EXIT DEVICE

Less Trim Finish

Device 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D,32

8888 $1,006.00 $1,068.00

8888 Series Trim

Function Trim ** All Finishes710 Dummy Trim (Lever rigid) ET (A, B, E, F, J, L, P. W) 417.00704 Key retracts latchbolt (Lever rigid) ET (A, B, E, F, J, L, P. W) 417.00713-8 Key locks/unlocks lever control ET (A, B, E, F, J, L, P. W) 417.00715-8 Trim always operable ET (A, B, E, F, J, L, P. W) 417.00710 Dummy Trim (Lever rigid) ET (Y, C, G, R, S - Coastal) & all Metro Element Levers 558.00704 Key retracts latchbolt (Lever rigid) ET (Y, C, G, R, S - Coastal) & all Metro Element Levers 558.00713-8 Key locks/unlocks lever control ET (Y, C, G, R, S - Coastal) & all Metro Element Levers 558.00715-8 Trim always operable ET (Y, C, G, R, S - Coastal) & all Metro Element Levers 558.0088C Key locks/unlocks trim LL, LB, LJ, LP 314.0088K Key retracts latchbolt LL, LB, LJ, LP 314.0088L Trim always operable LL, LB, LJ, LP 314.0088D Dummy Trim LL, LB, LJ, LP 314.0088E Blank Plate PTB 119.0098K Key retracts latchbolt STS 253.0098D Dummy Trim PTB, STS 253.0098E Blank Plate PTB, STS 119.0088K Key retracts latchbolt (04 function) PSB, MSL, FSL, FSW* 253.00

*FSW, 88C, 88K, 88L, 88D, & ET’s not available in 32, 32D.

8888 Series Freewheeling Trim

Function Trim ** All Finishes740 Dummy Trim (lever rotates) ET (A, B, E, F, J, L, P. W) 417.00743-8 Key engages/disengages lever ET (A, B, E, F, J, L, P. W) 417.00744 Key retracts latchbolt (lever rotates) ET (A, B, E, F, J, L, P. W) 417.00740 Dummy Trim (lever rotates) ET (Y, C, G, R, S- Coastal) & all Metro Element Levers 558.00743-8 Key engages/disengages lever ET (Y, C, G, R, S- Coastal) & all Metro Element Levers 558.00744 Key retracts latchbolt (lever rotates) ET (Y, C, G, R, S- Coastal) & all Metro Element Levers 558.00

8888 Reversible Rim Device

8888

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM, MN, MO, MP, MQ, MR, MS, MT, MU, MV, MW- Price the same as Coastal Levers (refer to ED-50, 51 for Metro Lever ET Price Pages).

ED-10EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- Prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.23 ANSI flat lip strike (8300, 8900, 9900, Including 12-Prefix) No addition 31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $34.0037 Spanner head screws Add $23.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes) Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action(Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch), (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master and grand masterkeying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-Pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core, (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside - Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00AL93 Alarmed, with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.*PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 SC Schlage C Keyway Cylinder 0 Bitted (Rim and # 41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0 Bitted (Rim and # 41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available AL, 57, 59 prefixes) Add $208.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section

SuffixCPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosive areas

with 32 and 32D finishes. How to order: 8313F x ETL x 32D x CPC – Discounts do not apply. Add $100.00

NOTESET trim supplied with 26D finish in lieu of 32D.FLW NOT available in stainless steel.Cylinders not included when ordered less trim.

*Exact door width required when ordering.

ED-11EXIT DEVICES

8300 SERIES




No. Bolts per Pack 1-3/4" Dr. 2-1/4" Dr. 3, 4, 9, 10, 10B, 10BL, 20D, 26D

8300, 12-8300 4 68-2521 68-2570 17.76 Pack

Thru Bolts with device 4.44 Each

ET ControlLever A-B-E-F-J-L-P-W

ET ControlCoastal Lever Y-C-G-R-S

& All Metro Elements Levers

PTBSTS-MAL-FLL-FLW

8300 Series-Narrow Stile Mortise Device

8300 Series FinishFunction 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10, 3, 4, 9, 10BL,

10B, 32D 15, 20D, 32 10B, 32D 10BL, 15, 20D, 32 10B, 32D 15, 20D, 32

8310 Exit Only No Trim $1,462.00 $1,544.00

8310 Dummy Trim (Lever rigid) $1,879.00 $1,961.00 $2,020.00 $2,102.00 $1,715.00 $1,797.00

8304 Key Retracts Latchbolt (Lever rigid) $1,879.00 * $1,961.00 * $2,020.00 * $2,102.00 * $1,715.00 $1,797.00

8313 Key locks/unlocks control $1,879.00 $1,961.00 $2,020.00 $2,102.00

8315 Trim always operable $1,879.00 $1,961.00 $2,020.00 $2,102.00

8328 Thumb piece always operable $1,773.00 $1,855.00

8363 Key locks/unlocks thumb piece $1,773.00 $1,855.00

8300 Series With Freewheeling Trim FinishFunction 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,

10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32

8340 Dummy Trim (Lever rotates) $1,879.00 $1,961.00 $2,020.00 $2,102.00

8343 Key engages/disengages lever $1,879.00 $1,961.00 $2,020.00 $2,102.00

8344 Key retracts latchbolt (Lever rotates) $1,879.00 * $1,961.00 * $2,020.00 * $2,102.00 *

10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,Electro-Mechanical 10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32

8370 Fail Safe $2,132.00 $2,214.00

8371 Fail Secure $2,132.00 $2,214.00

8375 Fail Safe 12v or 24v $2,192.00 * $2,274.00 * $2,318.00 * $2,400.00 *

8376 Fail Secure 12v or 24v $2,192.00 * $2,274.00 * $2,318.00 * $2,400.00 *

Note: 8375 and 8376, specify voltage required when ordering.

*Not available with Arrow, Best, Falcon Interchangeable core prefixes, SC and SE cylinders and V-10 cylinders.

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM, MN, MO, MP,MQ, MR, MS, MT, MU, MV, MW - Price the same as Coastal Levers.

ED-12EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.16 Cylinder lockdown feature (Not available with AL-, 59- Prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors greater than 1-3/4" and up to 2-1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes) Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.NB No Bottom Rod (Not available with 59 and BC59 prefix) No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: 8413F x ETL x 32D x CPC – Discounts do not apply. Add $100.00 NOTESET trim supplied with 26D finish in lieu of 32D.

* Exact door width required when ordering.

Vertical Rod Device to 96" Height No additionConcealed/Surface Vertical Rod Device over 96" to 120" Height Add $50.00Refer to catalog for max. door height availability on fire rated exit devices.

ED-13EXIT DEVICES

8400 SERIES






with 862, 863,864 Pull

Auxiliary Control

(106/113)

8400 Series-Narrow Stile Concealed Vertical Rod

Price includes 862 Pull (shown)

8400 Series Finish

Function 3, 4, 9, 10BL, 3, 4, 9, 10BL,10, 10B, 32D 15, 20D, 32 10, 10B, 32D 15, 20D, 32 10, 10B, 32D 3, 4, 32

8410 Exit Only No Trim $1,673.00 $1,758.00

8410 Dummy Trim (Lever rigid) $2,090.00 $2,175.00 $2,231.00 $2,316.00 $1,835.00 w $1,932.00 w

*8410 Key operates control $2,252.00 $2,349.00

8406 Key operates ET $2,090.00 $2,175.00 $2,231.00 $2,316.00

8413 Key locks/unlocks ET $2,090.00 $2,175.00 $2,231.00 $2,316.00


8400 Series With Freewheeling Trim Finish

Function 3, 4, 9, 10BL, 3, 4, 9, 10BL,10, 10B, 32D 15, 20D, 32 10, 10B, 32D 15, 20D, 32



8446 Key operates control $2,090.00 $2,175.00 $2,231.00 $2,316.00

Electro-Mechanical

8473 Fail Safe 12v or 24v $2,262.00 $2,347.00 $2,387.00 $2,472.00

8474 Fail Secure 12v or 24v $2,262.00 $2,347.00 $2,387.00 $2,472.00

Note: Specify voltage required when ordering.

863 (18" x 1" Diameter) Pull provided in lieu of 862 (10" x 1" Diameter) Add 40.00

864 (10" x 3/4" Diameter) Pull provided in lieu of 862 (10" x 1" Diameter) Deduct 21.00

NOTES:

w Dummy Trim includes pull only, auxiliary control not supplied.

Thru Bolt application not available.

Cylinders not included when ordered less trim.

*When ordering Exits with Auxiliary Control, please order as follows: example: 8410F x 106/113 x 862 x 32D x RHR


ED-14EXIT DEVICES

12-MD8400 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors greater than 1-3/4" and up to 2-1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.NB No Bottom Rod (Not available with 59 and BC59 prefix) No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: 12-MD8413F x ETL x 32D x CPC – Discounts do not apply. Add $100.00

NOTESET trim supplied with 26D finish in lieu of 32D.


Vertical Rod Device to 96" Height No additionConcealed/Surface Vertical Rod Device over 96" to 120" Height Add $50.00


ED-15EXIT DEVICES

12-MD8400 SERIES






with 862, 863,864 Pull

Auxiliary Control

(106/113)

12-MD8400 Series-Narrow Stile Concealed Vertical Rod


12-MD8400 Series Finish


12-MD8410 Exit Only No Trim $1,800.00 $1,885.00

12-MD8410 Dummy Trim (Lever rigid) $2,217.00 $2,302.00 $2,358.00 $2,443.00 $1,962.00 w $2,059.00 w

* 12-MD8410 Key operates control $2,379.00 $2,476.00

12-MD8406 Key operates ET $2,217.00 $2,302.00 $2,358.00 $2,443.00

12-MD8413 Key locks/unlocks ET $2,217.00 $2,302.00 $2,358.00 $2,443.00

12-MD8415 Trim always operable $2,217.00 $2,302.00 $2,358.00 $2,443.00

12-MD8400 With Freewheeling Trim Finish


12-MD8440 Dummy Trim (Lever rotates) $2,217.00 $2,302.00 $2,358.00 $2,443.00

12-MD8443 Key engages/disengages lever $2,217.00 $2,302.00 $2,358.00 $2,443.00

12-MD8446 Key operates control $2,217.00 $2,302.00 $2,358.00 $2,443.00

Electro-Mechanical

12-MD8473 Fail Safe 12v or 24v $2,389.00 $2,474.00 $2,514.00 $2,599.00

12-MD8474 Fail Secure 12v or 24v $2,389.00 $2,474.00 $2,514.00 $2,599.00




NOTES: w Dummy Trim includes pull only, auxiliary control not supplied.

Thru Bolt application not available.

Cylinders Not Included When Ordered Less Trim.

*When ordering Exits with Auxiliary Control Design, please order as follows: example: 12-MD8410F x 106/113 x 862 x 32D x RHR


ED-16EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.16 Cylinder lockdown feature(Not available with AL-, 59- Prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $28.0037 Spanner head screws Add $19.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefix Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.GL Guarded Latch Add $26.00 SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat prefix (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section



NOTESET trim supplied with 26D finish in lieu of 32D


ED-17EXIT DEVICES

8500 SERIES






862, 863, 864 Pull Price includes 862 Pull

(shown)

8500 Series-Narrow Stile Rim Device

8500 Series Finish


8510 Exit Only No Trim $1,212.00 $1,266.00

8510 Dummy Trim (Lever rigid) $1,629.00 $1,683.00 $1,770.00 $1,824.00 $1,374.00 $1,440.00

8504 Key retracts latchbolt (Lever rigid) $1,629.00 $1,683.00 $1,791.00 $1,857.00







8544 Key retracts latchbolt (Lever rotates) $1,629.00 $1,683.00 $1,770.00 $1,824.00

Electro-Mechanical

8573 Fail Safe 12v or 24v $1,801.00 $1,855.00 $1,926.00 $1,980.00

8574 Fail Secure 12v or 24v $1,801.00 $1,855.00 $1,926.00 $1,980.00





No. Bolts per Pack 1-3/4" Dr. 2-1/4"Dr. 3, 4, 9, 10, 10B, 10BL, 20D, 26D

8500 4 68-2510 68-2511 17.08 Pack


NOTES: Cylinders not included when ordered less trim.

Cylinder included on keyed functions.


ED-18EXIT DEVICES

MD8600 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors greater than 1-3/4" and up to 2-1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.73-7P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.NB No Bottom Rod (Not available with 59 and BC59 prefix ) No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: MD8613F x ETL x 32D x CPC – Discounts do not apply. Add $100.00

NOTESET trim supplied with 26D finish in lieu of 32D



ED-19EXIT DEVICES

MD8600 SERIES



MD8600 Series Finish

10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10,Function 10B, 32D 15, 20D,32 10B, 32D 15, 20D,32 10B, 32D 3, 4, 32

MD8610 Exit Only No Trim $1,592.00 $1,682.00

MD8610 Dummy Trim (Lever rigid) $2,009.00 $2,009.00 $2,150.00 $2,240.00 $1,754.00 w $1,856.00 w

* MD 8610 Key operates control $2,171.00 $2,273.00

MD8606 Key operates ET $2,009.00 $2,009.00 $2,150.00 $2,240.00

MD8613 Key locks/unlocks ET $2,009.00 $2,009.00 $2,150.00 $2,240.00

MD8615 Trim always operable $2,009.00 $2,009.00 $2,150.00 $2,240.00

MD8600 Series With Freewheeling Trim 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,

Function 10B, 32D 15, 20D,32 10B, 32D 15, 20D,32

MD8640 Dummy Trim (Lever rotates) $2,009.00 $2,009.00 $2,150.00 $2,240.00

MD8643 Key engages/disengages lever $2,009.00 $2,009.00 $2,150.00 $2,240.00

MD8646 Key operates control $2,009.00 $2,009.00 $2,150.00 $2,240.00

Electro-Mechanical

MD8673 Fail Safe 12v or 24v $2,181.00 $2,271.00 $2,306.00 $2,396.00

MD8674 Fail Secure 12v or 24v $2,181.00 $2,271.00 $2,306.00 $2,396.00




w Dummy Trim includes pull only, Auxiliary Control not supplied.




with 862,863, 864

Pull

Auxiliary Control

(106/113)

MD8600 Series-Concealed Vertical Rod Device


No. Bolts per Pack 1-3/4" Dr. 2-1/4" Dr. 3, 4, 9, 10, 10B, 10BL,20D,26D

MD8600 4 68-2279 68-2280 17.76 Pack


Note: Cylinders not included when ordered less trim.


*When ordering Exits with Auxiliary Control Design, please order as follows: example: MD8610F x 106/113 x 862 x 32D x RHR

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM, MN, MO, MP, MQ,MR, MS, MT, MU, MV, MW - Price the same as Coastal Levers.

ED-20EXIT DEVICES

WD8600 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors greater than 1-3/4" and up to 2-1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *53 Latchbolt Monitor Switch – Available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16, 55, 56, 57, 58, NB prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable construction plastic core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.NB No Bottom (Not available with 59 and BC59 prefix) No addition SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: WD8613F x ETL x 32D x CPC – Discounts do not apply. Add $100.00




ED-21EXIT DEVICES

WD8600 SERIES



WD8600 Series Finish10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10,

Function 10B, 32D 15, 20D, 32 10B,32D 15, 20D, 32 10B,32D 3, 4, 32

WD8610 Exit Only No Trim $1,771.00 $1,861.00

WD8610 Dummy Trim (Lever rigid) $2,188.00 $2,278.00 $2,329.00 $2,419.00 $1,933.00 w $2,035.00 w

* WD8610 Key operates control $2,350.00 $2,452.00

WD8606 Key operates ET $2,188.00 $2,278.00 $2,329.00 $2,419.00

WD8613 Key locks/unlocks ET $2,188.00 $2,278.00 $2,329.00 $2,419.00

WD8615 Trim always operable $2,188.00 $2,278.00 $2,329.00 $2,419.00


No. Bolts per Pack 1-3/4" Dr. 2-1/4" Dr. 3, 4, 9, 10, 10B, 10BL, 20D 26D

WD8600 4 68-2279 68-2280 17.76 Pack


Note: Cylinders not included when ordered less trim.




with 862, 863,864 Pull

Auxiliary Control

(106/113)

WD8600 Series-Concealed Vertical Rod Device


WD8600 Series With Freewheeling Trim 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10, 3, 4, 9,

Function 10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32 10B, 32D 10BL, 20D, 32

WD8640 Dummy Trim (Lever rotates) $2,188.00 $2,278.00 $2,329.00 $2,419.00

WD8643 Key engages/disengages lever $2,188.00 $2,278.00 $2,329.00 $2,419.00

WD8646 Key operates control $2,188.00 $2,278.00 $2,329.00 $2,419.00

Electro-Mechanical

WD8673 Fail Safe 12v or 24v $2,360.00 $2,450.00 $2,485.00 $2,575.00

WD8674 Fail Secure 12v or 24v $2,360.00 $2,450.00 $2,485.00 $2,575.00




w Dummy Trim includes pull only, Auxiliary Control not supplied.

*When ordering Exits with Auxiliary Control Design, please order as follows: example: WD8610F x 106/113 x 862 x 32D x RHR


ED-22EXIT DEVICES

SP8600 SERIES PREFIXESPP8600 SERIES PREFIXESPR8600 SERIES PREFIXES



For Wood door Applications – This Kit Must Be OrderedWood Door Top Case Kit584K Top Case Kit Required For Wood Door Applications Add 41.00

PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature Add $94.00 19 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00HK56 Latch Retraction with Hex Key Dogging Add $772.00 *58 Electric Dogging Add $374.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master and grand masterkeying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-Pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning Outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59, prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating - MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: PR8613F x ETL x 32D x CPC – Discounts do not apply. Add $100.00




ED-23EXIT DEVICES

SP8600 SERIES • PP8600 SERIES • PR8600 SERIES


SP8600 Series Finish

Single Door Projecting Bolt Function 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

SP8610 Exit Only - No Trim $1,802.00 $1,892.00

SP8610 Dummy Trim (Lever rigid) $2,219.00 $2,309.00 $2,360.00 $2,450.00

SP8606 Key operates control $2,219.00 $2,309.00 $2,360.00 $2,450.00

SP8613 Key locks/unlocks control $2,219.00 $2,309.00 $2,360.00 $2,450.00

SP8615 Trim controls always operable $2,219.00 $2,309.00 $2,360.00 $2,450.00

SP8673 Fail Safe 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

SP8674 Fail Secure 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

SP8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

SP8640 Dummy Trim (Lever rotates) $2,219.00 $2,309.00 $2,360.00 $2,450.00

SP8643 Key engages/disengages lever $2,219.00 $2,309.00 $2,360.00 $2,450.00


PP8600 Series

Pair of Doors Projecting Bolt (For Active Door) 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

PP8610 Exit Only - No Trim $1,802.00 $1,892.00

PP8610 Dummy Trim (Lever rigid) $2,219.00 $2,309.00 $2,360.00 $2,450.00

PP8606 Key operates control $2,219.00 $2,309.00 $2,360.00 $2,450.00

PP8613 Key locks/unlocks control $2,219.00 $2,309.00 $2,360.00 $2,450.00

PP8615 Trim controls always operable $2,219.00 $2,309.00 $2,360.00 $2,450.00

PP8673 Fail Safe 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

PP8674 Fail Secure 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

PP8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

PP8640 Dummy Trim (Lever rotates) $2,219.00 $2,309.00 $2,360.00 $2,450.00

PP8643 Key engages/disengages lever $2,219.00 $2,309.00 $2,360.00 $2,450.00


PR8600 Series

Pair of Doors Recessed Bolt (For Inactive Door) 10, 10B, 32D 3, 4, 9,10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9,10BL, 15, 20D, 32

PR8610 Exit Only - No Trim $1,802.00 $1,892.00

PR8610 Dummy Trim (Lever rigid) $2,219.00 $2,309.00 $2,360.00 $2,450.00

PR8606 Key operates control $2,219.00 $2,309.00 $2,360.00 $2,450.00

PR8613 Key locks/unlocks control $2,219.00 $2,309.00 $2,360.00 $2,450.00

PR8615 Trim controls always operable $2,219.00 $2,309.00 $2,360.00 $2,450.00

PR8673 Fail Safe 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

PR8674 Fail Secure 12v or 24v $2,391.00 $2,481.00 $2,516.00 $2,606.00

PR8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

PR8640 Dummy Trim (Lever rotates) $2,219.00 $2,309.00 $2,360.00 $2,450.00

PR8643 Key engages/disengages lever $2,219.00 $2,309.00 $2,360.00 $2,450.00


8600 Series-ConcealedVertical Rod Device,Center Top Latch



No. Bolts per Pack 1-3/4" Dr. 3, 4, 9, 10, 10B, 10BL, 20D, 26D

12-8600 4 68-2279 17.76/Pack

Thru bolts ordered with device 4.44 Each

Note: SP/PP/PR8673 and 8674 – Specify voltage required when ordering.

*

*

*

*

*

*

*

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM,MN, MO, MP, MQ, MR, MS, MT, MU, MV, MW - Price the same as Coastal Levers.

ET ControlCoastal Lever Y-C-G-S-R& All Metro Elements Levers


ED-24EXIT DEVICES

LS8600 • LP8600 • LR8600 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with 56-prefix) Add $94.00 19 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00HK56 Latch Retraction with Hex Key Dogging Add $772.00 *58 Electric Dogging Add $374.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder Includes master and grand masterkeying charges Add $44.00 / cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable disposable Plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-Pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: LR8613F x ETL x 32D x CPC – Discounts do not apply. Add $100.00

NOTES

ET trim supplied with 26D finish in lieu of 32D.

Only available for 36", 42", 44", 46" and 48" doors. No other sizes available.





ED-25EXIT DEVICES

LS8600 SERIES • LP8600 SERIES • LR8600 SERIES


LS8600 Series Finish


LS8610 Exit Only - No Trim $1,663.00 $1,753.00

LS8610 Dummy Trim (Lever rigid) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8606 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8613 Key locks/unlocks control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8615 Trim controls always operable $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8673 Fail Safe 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LS8674 Fail Secure 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LS8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

LS8640 Dummy Trim (Lever rotates) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8643 Key engages/disengages lever $2,080.00 $2,170.00 $2,221.00 $2,311.00

LS8646 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8600 Series


LP8610 Exit Only - No Trim $1,663.00 $1,753.00

LP8610 Dummy Trim (Lever rigid) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8606 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8613 Key locks/unlocks control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8615 Trim controls always operable $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8673 Fail Safe 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LP8674 Fail Secure 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LP8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

LP8640 Dummy Trim (Lever rotates) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8643 Key engages/disengages lever $2,080.00 $2,170.00 $2,221.00 $2,311.00

LP8646 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8600 Series

Pair of Doors Recessed Bolt (For Inactive Door) 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

LR8610 Exit Only - No Trim $1,663.00 $1,753.00

LR8610 Dummy Trim (Lever rigid) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8606 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8613 Key locks/unlocks control $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8615 Trim controls always operable $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8673 Fail Safe 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LR8674 Fail Secure 12v or 24v $2,252.00 $2,342.00 $2,377.00 $2,467.00

LR8600 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

LR8640 Dummy Trim (Lever rotates) $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8643 Key engages/disengages lever $2,080.00 $2,170.00 $2,221.00 $2,311.00

LR8646 Key operates control $2,080.00 $2,170.00 $2,221.00 $2,311.00

Note: LS/LP/LR8673 and 8674 – Specify voltage required when ordering.

Low Profile Exit DeviceET ControlLever A-B-E-F-J-L-P-W

*

*

*

*

*

*

*

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM,MN, MO, MP, MQ, MR, MS, MT, MU, MV, MW - Price the same as Coastal





ED-26EXIT DEVICES


PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 14 Sliding bolt bottom case for 8700 Series No addition 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors greater than 1 3/4" and up to 2 1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 43 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes – not available with NB Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with HC, 16, 56 thru 59 prefixes) Add $437.00 AL93 Alarmed with continuous alarm (not available with HC, 16, 56 thru 59 prefixes) Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.HC Hurricane Code (available only with 8700 and 8800) – See catalog for function availability Add $104.0012HC UL Fire Label-Hurricane Code (available only with 8700 and 8800) – See catalog for function availability Add $231.00SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder SectionSuffixCPC Clear Powder Coat – Recommended for exit devices used in full exterior application and highly corrosive areas

with 32 and 32D finishes. How to order: 8713F x ETL x 32D x CPC – Discounts do not apply. Add $100.00 NOTESET trim supplied with 26D finish in lieu of 32D.




ED-27EXIT DEVICES

8700 SERIES


Coastal ET ControlCoastal Lever Y-C-G-R-S


PTBSTS-MAL-FLL-FLW

with 862, 863 864 Pull

306/313Auxiliary Control

8700 Series-Surface Vertical Rod Device



No. Bolts per Pack 1-3/4" Dr. 2 1/4" Dr. 3,9,10,10B,10BL,20D,26D

8700 Rail & Chassis 4 68-2279 68-2280 17.76 Pack

8700 Cases & Guides 10 68-2282 68-2283 44.40 Pack

12-8700 16 68-2288 68-2289 71.04 Pack


8700 Series Finish

10, 3, 4, 9, 10, 3, 4, 9, 10, 3, 4, 9, 10,10B, 10BL, 15, 10B, 10BL, 15, 10B, 10BL, 15, 10B,

Function 32D 20D, 32 32D 20D, 32 32D 20D, 32 32D 3, 4, 32

8710 Exit Only - No Trim $1,409.00 $1,490.00

8710 Dummy Trim (Lever rigid) $1,826.00 $1,907.00 $1,967.00 $2,048.00 $1,662.00 $1,743.00 $1,571.00 w $1,664.00 w

*8710 Key operates control $1,988.00 $2,081.00

8706 Key operates ET $1,826.00 $1,907.00 $1,967.00 $2,048.00




8762 Key operates Thumb piece $1,736.00 $1,817.00

8763 Key Locks/unlocks Thumb piece $1,736.00 $1,817.00

*When ordering Exits with Auxiliary Control Design, please order as follows: example: 8710F x 306/313 x 862 x 32D x RHR

8700 Series Freewheeling Trim 10, 3, 4, 9, 10, 3, 4, 9,

Function 10B, 10BL, 15, 10B, 10BL, 15,

32D 20D, 32 32D 20D, 32



8746 Key operates control $1,826.00 $1,907.00 $1,967.00 $2,048.00

Electro-Mechanical

8773 Fail Safe 12v or 24v $1,998.00 $2,079.00 $2,123.00 $2,204.00

8774 Fail Secure 12v or 24v $1,998.00 $2,079.00 $2,123.00 $2,204.00




w Dummy Trim includes pull only, Auxiliary Control not supplied.Note: Cylinders not included when ordered less trim.

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG,MH, MI, MJ, MK, ML, MM, MN, MO, MP, MQ, MR, MS,MT, MU, MV, MW - Price the same as Coastal Levers.




ED-28EXIT DEVICES

NB8700 SERIES PREFIXES

PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $69.0037 Spanner head screws Add $46.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with HC, 16, 56 thru 59 prefixes) Add $437.00 AL93 Alarmed with continuous alarm (not available with HC, 16, 56 thru 59 prefixes) Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section







ED-29EXIT DEVICES

NB8700 SERIES




8700 Series-Surface Vertical Rod Device, No Bottom Rod



NB8700 Rail/Chassis/Case/Guides 10 68-3943 68-2289 62.17 Pack

12-NB8700 Rail/Chassis/Case/Guides 10 68-3943 68-2289 71.04 Pack

NB8700 Series Finish

10, 3, 4, 9, 10, 3, 4, 9, 10,10B, 10BL, 15, 10B, 10BL, 15, 10B, 3, 4,

Function 32D 20D, 32 32D 20D, 32 32D 32

NB8710 Exit Only - No Trim $1,409.00 $1,490.00

NB8710 Dummy Trim (Lever rigid) $1,826.00 $1,907.00 $1,967.00 $2,048.00 $1,571.00 w $1,664.00 w

*NB8710 Key operates control $1,988.000 $2,081.00

NB8706 Key operates ET $1,826.00 $1,907.00 $1,967.00 $2,048.00

NB8713 Key locks/unlocks ET $1,826.00 $1,907.00 $1,967.00 $2,048.00

NB8715 Trim always operable $1,826.00 $1,907.00 $1,967.00 $2,048.00

NB8700 Series Freewheeling Trim 10, 3, 4, 9, 10, 3, 4, 9,

Function 10B, 10BL, 15, 10B, 10BL, 15,

32D 20D, 32 32D 20D, 32

NB8740 Dummy Trim (Lever rotates) $1,826.00 $1,907.00 $1,967.00 $2,048.00

NB8743 Key engages/disengages lever $1,826.00 $1,907.00 $1,967.00 $2,048.00

NB8746 Key operates control $1,826.00 $1,907.00 $1,967.00 $2,048.00

Electro-Mechanical

NB8773 Fail Safe 12v or 24v $1,998.00 $2,079.00 $2,123.00 $2,204.00

NB8774 Fail Secure 12v or 24v $1,998.00 $2,079.00 $2,123.00 $2,204.00





with 862, 863 864 Pull



*When ordering Exits with Auxiliary Control Design, please order as follows: example: NB8710F x 306/313 x 862 x 32D x RHR

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI,MJ, MK, ML, MM, MN, MO, MP, MQ, MR, MS, MT, MU, MV, MW - Price the same as Coastal Levers.


ED-30EXIT DEVICES

FM8700 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL fire label Exit Devices $127.00 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.36 6 Lobe security head screws Add $69.0037 Spanner head screws Add $46.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch availalble with 55 prefix Add $183.00 *55 Signal Switch in Rail Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin wth 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section




“Max Door Height 84”“Pair of Doors MUST use HC980 Mullion”“Available for “E” & “F” rails only


ED-31EXIT DEVICES

FM8700 SERIES






FM8700 Series-Surface Vertical Rod Device –2 Pt. Latching, complies with FEMA 361

FM8700 Series Finish

10, 3, 4, 9, 10, 3, 4, 9, 10,10B, 10BL, 15, 10B, 10BL, 15, 10B, 3, 4,

Function 32D 20D, 32 32D 20D, 32 32D 32

FM8710 Exit Only - No Trim $2,390.00 $2,471.00

FM8710 Dummy Trim (Lever rigid) $2,807.00 $2,888.00 $2,948.00 $3,029.00 $2,552.00 w $2,645.00 w

*FM8710 Key operates control $2,969.00 $3,062.00

FM8706 Key operates ET $2,807.00 $2,888.00 $2,948.00 $3,029.00

FM8713 Key locks/unlocks ET $2,807.00 $2,888.00 $2,948.00 $3,029.00

FM8715 Trim always operable $2,807.00 $2,888.00 $2,948.00 $3,029.00

FM8700 Series Freewheeling Trim 10, 3, 4, 9, 10, 3, 4, 9,

Function 10B, 10BL, 15, 10B, 10BL, 15,

32D 20D, 32 32D 20D, 32

FM8740 Dummy Trim (Lever rotates) $2,807.00 $2,888.00 $2,948.00 $3,029.00

FM8743 Key engages/disengages lever $2,807.00 $2,888.00 $2,948.00 $3,029.00

FM8746 Key operates control $2,807.00 $2,888.00 $2,948.00 $3,029.00

Electro-Mechanical

FM8773 Fail Safe 12v or 24v $2,979.00 $3,060.00 $3,104.00 $3,185.00

FM8774 Fail Secure 12v or 24v $2,979.00 $3,060.00 $3,104.00 $3,185.00


863 (18" x 1" Diameter) Pull provided in lieu of 862 (10" x 1" Diameter) Add 40.00 w

864 (10" x 3/4" Diameter) Pull provided in lieu of 862 (10" x 1" Diameter) Deduct 21.00 w


with 862, 863 864 Pull



*When ordering Exits with Auxiliary Control Design, please order as follows: example: FM8710F x 306/313 x 862 x 32D x RHR



8700 Rail & Chassis 4 68-2279 68-2280 17.76 Pack

8700 Cases & Guides 10 68-2282 68-2283 44.40 Pack

12-8700 16 68-2288 68-2289 71.04 Pack



ED-32EXIT DEVICES

SP8700 • PP8700 • PR8700 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-) Add $94.00 19 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.36 6 Lobe security head screws Add $69.0037 Spanner head screws Add $46.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal Micro Switch in ET Control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26" and wide stile is 28") Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with HC, 16, 56 thru 59 prefixes) Add $437.00 AL93 Alarmed with continuous alarm (not available with HC, 16, 56 thru 59 prefixes) Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ –Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section






683 Kit for PP/PR8700 Thermal Pin Kit for use with 45/60/90 Minute Wood Doors683 58.00/Kit

ED-33EXIT DEVICES

SP8700 • PP8700 • PR8700 SERIES


SP8700 Series Finish


SP8710 Exit Only - No Trim $1,462.00 $1,543.00

SP8710 Dummy Trim (Lever rigid) $1,879.00 $1,960.00 $2,020.00 $2,101.00


SP8713 Key locks/unlocks control $1,879.00 $1,960.00 $2,020.00 $2,101.00

SP8715 Trim controls always operable $1,879.00 $1,960.00 $2,020.00 $2,101.00

SP8773 Fail Safe 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

SP8774 Fail Secure 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

SP8700 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

SP8740 Dummy Trim (Lever rotates) $1,879.00 $1,960.00 $2,020.00 $2,101.00

SP8743 Key engages/disengages lever $1,879.00 $1,960.00 $2,020.00 $2,101.00


PP8700 Series


PP8710 Exit Only - No Trim $1,462.00 $1,543.00

PP8710 Dummy Trim (Lever rigid) $1,879.00 $1,960.00 $2,020.00 $2,101.00


PP8713 Key locks/unlocks control $1,879.00 $1,960.00 $2,020.00 $2,101.00

PP8715 Trim controls always operable $1,879.00 $1,960.00 $2,020.00 $2,101.00

PP8773 Fail Safe 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

PP8774 Fail Secure 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

PP8700 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

PP8740 Dummy Trim (Lever rotates) $1,879.00 $1,960.00 $2,020.00 $2,101.00

PP8743 Key engages/disengages lever $1,879.00 $1,960.00 $2,020.00 $2,101.00


PR8700 Series

Pair of Doors Recessed Bolt (For Inactive Door) 10, 10B, 32D 3, 4, 9,10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9,10BL, 15, 20D, 32

PR8710 Exit Only - No Trim $1,462.00 $1,543.00

PR8710 Dummy Trim (Lever rigid) $1,879.00 $1,960.00 $2,020.00 $2,101.00


PR8713 Key locks/unlocks control $1,879.00 $1,960.00 $2,020.00 $2,101.00

PR8715 Trim controls always operable $1,879.00 $1,960.00 $2,020.00 $2,101.00

PR8773 Fail Safe 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

PR8774 Fail Secure 12v or 24v $2,051.00 $2,132.00 $2,176.00 $2,257.00

PR8700 Series With Freewheeling Trim 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

PR8740 Dummy Trim (Lever rotates) $1,879.00 $1,960.00 $2,020.00 $2,101.00

PR8743 Key engages/disengages lever $1,879.00 $1,960.00 $2,020.00 $2,101.00


8700 Series-SurfaceVertical Rod Device,Center Top Latch



Thru Bolt Application No. Bolts Pack Part # Finish

per Pack 1-3/4" Dr. 3, 4, 9, 10, 10B, 10BL, 20D, 26D

SP/PP/PR-87008700 Rail/Chassis/Case/Guides 10 68-3943 62.17/Pack

12-SP/PP/PR-8700 Rail/Chassis/Case/Guides 10 68-3943 71.04/Pack

Note: SP/PP/PR8773 and 8774 – Specify voltage required when ordering.

*

*

*

*

*

*

*

Note: ET x Metro Levers: MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MM,MN, MO, MP, MQ, MR, MS, MT, MU, MV, MW - Price the same as Coastal Levers.


ED-34EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $37.0037 Spanner head screws Add $25.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 *54 Internal micro switch in ET control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes)(with HC-prefix consult factory) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16-, 55-, 56-, 57-, 58- HC-prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic core No addition 72 Small Format Interchangeable Cores 6-Pin Construction Core provided (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with HC, 16, 56 thru 59 prefixes) Add $437.00 AL93 Alarmed with continuous alarm (not available with HC, 16, 56 thru 59 prefixes) Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.GL Guarded Latch Add $26.00 HC Hurricane Code (available only with 8700 and 8800) (04, 10, 13, 15, 40, 43, 44, 75, 76 functions only) Add $62.0012HC UL Fire Label-Hurricane Code (available only with 8700 and 8800) (04, 10, 13, 15, 40, 43, 44, 75, 76 functions only) Add $189.00SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder SectionWS Windstorm Certified No addition



NOTESET trim supplied with 26D finish in lieu of 32D.8888 Device and Trims, see pg. ED-9.


ED-35EXIT DEVICES

8800 SERIES






PTBSTS-MAL-FLL-FLWPSB-MSL-FSL-FSW(04 function only)

862, 863, 864 PullPrice includes

862 Pull (shown)

Cylinder included on keyed functions.

8800 Series-Rim Device



8800, 12-8800 4 68-2279 68-2280 17.76 Pack

Thru Bolts ordered with device 4.44 Each Note: FLW, FSW not available in 32, 32D.

PSB, MSL, FSL, FSW for use with 8804 function only. Supplied with revised cylinder hole location and thrubolting.Cylinder not included when ordered less trim. *With exception of 04 function.

8800 Series Finish

10, 3, 4, 9, 10, 3, 4, 9, 10, 3, 4, 9, 10,10B, 10BL, 15, 10B, 10BL, 15, 10B, 10BL, 15, 10B,


8810 Exit Only - No Trim $1,015.00 $1,068.00

8810 Dummy Trim (Lever rigid) $1,432.00 $1,485.00 $1,573.00 $1,626.00 $1,268.00 $1,321.00 $1,177.00 $1,242.00

*8804 Key retr. latchbolt (lever rigid) $1,432.00 $1,485.00 $1,573.00 $1,626.00 $1,268.00 $1,321.00 $1,177.00 $1,242.00

8806 Key operates ET $1,432.00 $1,485.00 $1,573.00 $1,626.00



8816 Key i/s locks/unlocks leverKey o/s retracts latchbolt

$1,555.00 $1,608.00 $1,696.00 $1,749.00



8866 Key i/s locks/unlocks thumb pc.Key o/s retracts latchbolt

$1,393.00 $1,446.00




8844 Key retr. ltchblt. (Lever rotates) $1,432.00 $1,485.00 $1,573.00 $1,626.00

8846 Key operates ET $1,432.00 $1,485.00 $1,573.00 $1,626.00

Electro-Mechanical

8873 $1,604.00 $1,657.00 $1,729.00 $1,782.00

8874 $1,604.00 $1,657.00 $1,729.00 $1,782.00

8875 Fail Safe 12v or 24v $1,745.00 $1,798.00 $1,871.00 $1,924.00

8876 Fail Secure 12v or 24v $1,745.00 $1,798.00 $1,871.00 $1,924.00





ED-36EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 16 Cylinder lockdown feature (Not available with AL-, 59- prefix) Add $94.00 19 80 Series pushbar without Lexan touchpad No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.23 ANSI flat lip strike (8300, 8900, 9900, Including 12-Prefix) No addition 31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $41.0037 Spanner head screws Add $27.0043 Flush End Cap No addition *53 Latchbolt Monitor Switch – available with 55, 56, 57, 58, AL prefixes Add $183.00 54 Internal Micro Switch in ET Control (not available with 04/10 function) Add $183.00

*55 Signal Switch in Rail Add $183.00 *56 Remote Dogging / Latch Retraction (Minimum door width for narrow stile is 26” and wide stile is 28”) Add $772.00 HK56 Latch Retraction with Hex Key Dogging Add $772.00 *57 Delayed Action (Magnet ordered separate) Add $1,158.00 *58 Electric Dogging Add $374.00 *59 Electroguard (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,234.00 *BC59 Electroguard Boca Code (Needs Door Status Switch) (Not available with 16-, 55-, 56-, 57-, 58- Prefixes) Add $1,318.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $437.00 AL93 Alarmed with continuous alarm (not available with 16-, 56- thru 59- prefixes) (minimum Dr width 36") Add $489.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 *TL SARGuide™ – Illuminated Touchpad (not available with AL, 57, 59 prefixes) Add $208.00 *PL SARGuide™ PL – Photoluminescent Coating – MUST be ordered with 19 prefix (without Lexan Touchpad) Add $270.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder SectionWS Windstorm Certified No addition





ED-37EXIT DEVICES

8900 SERIES




No. Bolts per pack 1-3/4" Dr. 2-1/4" Dr. 3, 9, 10, 10B, 10BL, 20D, 26D

8900 4 68-2279 68-2280 17.76 Pack


NOTES: Cylinder not included when ordered less trim.

*Not available with Arrow, Best, Falcon Interchangeable Core Prefixes, SC + SE Cylinders, and V-10 Cylinders.

8900 Series Finish

10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,

Function 10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32 10B, 32D 15, 20D, 32

8910 Exit Only - No Trim $1,388.00 $1,465.00

8910 Dummy Trim (Lever rigid) $1,805.00 $1882.00 $1,946.00 $2,023.00 $1,641.00 $1,718.00

8904 Key retracts latchbolt (Lever rigid) $1,805.00* $1882.00* $1,946.00* $2,023.00* $1,641.00 $1,718.00

8906 Key operates ET $1,805.00 $1882.00 $1,946.00 $2,023.00

8913 Key locks/unlocks control $1,805.00 $1882.00 $1,946.00 $2,023.00

8915 Trim always operable $1,805.00 $1882.00 $1,946.00 $2,023.00

8916 Key inside locks/unlocks knob $1,914.00* $1991.00* $2,055.00* $2,132.00*

8928 Thumb pc. always operable $1,702.00 $1,779.00

8963 Key locks/unlocks thumb pc. $1,702.00 $1,779.00

8966 Key inside locks/unlocks thumb pc. $1,756.00* $1,833.00*


8940 Dummy Trim (Lever rotates) $1,805.00 $1882.00 $1,946.00 $2,023.00

8943 Key engages/disengages lever $1,805.00 $1882.00 $1,946.00 $2,023.00

8944 Key retracts latchbolt (Lever rotates) $1,805.00* $1882.00* $1,946.00* $2,023.00*

Electro-Mechanical

8970 Fail Safe $ 2,058.00 $ 2,135.00

8971 Fail Secure $ 2,058.00 $ 2,135.00

8975 Fail Safe 12v or 24v $2,118.00* $2,195.00 * $2,244.00* $2,321.00*

8976 Fail Secure 12v or 24v $2,118.00* $2,195.00 * $2,244.00* $2,321.00*





PTBSTS-MAL-FLL-FLW

8900 Series-Mortise Device


ED-38EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 12 UL Fire Label Exit Devices Add $127.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition

ED-39EXIT DEVICES

9400 SERIES



9400 Series Finish

Function 4, 10, 26D 03, 10B 9, 20D, 26, 32, 32D

9410 Exit Only $1,981.00 $2,179.00 $2,290.00

9404* Key retracts latchbolt $2,153.00 $2,348.00 $2,461.00

*Supplied with cylinder. If less cylinder is required, please specify LC.

9400 Series – Narrow Stile Concealed Vertical Rod

ED-40EXIT DEVICES

9700 EXIT PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 14 Sliding bolt bottom case for 9700 Series No addition 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors greater than 1-3/4" and up to 2-1/4" (including those with auxiliary controls) No addition


36 6 Lobe security head screws Add $75.0037 Spanner head screws Add $50.0054 Internal Micro Switch in ET Control Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic core No addition 72 Small Format Interchangeable Cores 6-Pin Construction Core provided (7-pin with 11 Prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Knurled Crossbar Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Knurled Crossbar, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


with 32 and 32D finishes. How to order: 9713 x ETL x 32D x CPC – Discounts do not apply. Add $100.00

NOTESET trim supplied with 26D finish in lieu of 32D.Vertical Rod Device to 96" Height No additionConcealed/Surface Vertical Rod Device over 96" to 120" Height Add $50.00Reinforced Crossbar (90 Series) Add 63.00Center Bearing Bracket for door 48" and over when ordered with Device (90 Series) Add 188.00Refer to catalog for max. door height availability on fire rated exit devices.

ED-41EXIT DEVICES

9700 SERIES



Finish

10, 3, 4, 9, 10, 3, 4, 9, 10, 3, 4, 9, 10,

10B, 10BL, 10B, 10BL, 10B, 10BL, 10B,


9710 Exit Only - No Trim $1,587.00 $1,848.00

9710 Dummy Trim $2,004.00 $2,265.00 $2,145.00 $2,406.00 $1,840.00 $2,101.00 $1,749.00 w $2,022.00 w

*9710 Key Operates Control $2,166.00 $2,439.00

9706 Key operates ET $2,004.00 $2,265.00 $2,145.00 $2,406.00





Electro-Mechanical

9773 Fail Safe 12v or 24v $2,176.00 $2,437.00 $2,301.00 $2,562.00

9774 Fail Secure 12v or 24v $2,176.00 $2,437.00 $2,301.00 $2,562.00




PRK design available in 06, 10, 13, 15 functions. (Not available in Stainless Steel.) From ET price deduct 107.00




PTBSTS-MAL-FLL-FLW

with 862, 863 864 Pull

Auxiliary Control

(306/313)

9700 Series-Surface Vertical Rod Device



No. Bolts per pack 1-3/4" Dr. 3, 9, 10, 10B, 10BL, 20D, 26D

9700 14 97-2579 62.16 Pack

12-9700 16 97-2965 71.04 Pack



w Dummy Trim includes Pull only, Auxiliary Control not supplied

*When ordering Exits with Auxiliary Control Design, please order as follows: example: 9710 x 306/313 x 862 x 32D x RHR


ED-42EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $31.0037 Spanner head screws Add $21.0054 Internal Micro Switch in ET Control Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic construction core No addition 72 Small Format Interchangeable 6-Pin construction core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Ad $40.00 / cyl.75 Warning Inside-Knurled crossbar Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Knurled crossbar, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section



NOTESET trim supplied with 26D finish in lieu of 32D.9898 Device and Trims see page ED-7.Reinforced Crossbar (90 Series) Add 63.00Center Bearing Bracket for door 48" and over when ordered with Device (90 Series) Add 188.00

ED-43EXIT DEVICES

9800 SERIES




ET ControlCoastal Lever Y-C-G-S-R


PTBSTS-MAL-FLL-FLW

9800 Series-Rim Device

Finish

10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,

Function 10B, 32D 20D, 32, 10B, 32D 20D, 32 10B, 32D 20D, 32

9810 Exit Only No Trim $1,164.00 $1,396.00

9810 Dummy Trim $1,581.00 $1,813.00 $1,722.00 $1,954.00 $1,417.00 $1,649.00

9804 Key retracts latchbolt $1,581.00 $1,813.00 $1,722.00 $1,954.00 $1,417.00 $1,649.00



9828 Thumb pc. always operable $1,483.00 $1,715.00

9863 Key locks/unlocks thumb pc. $1,483.00 $1,715.00

Electro-Mechanical

9875* Fail Safe 12v or 24v $1,894.00 $2,126.00 $2,020.00 $2,252.00

9876* Fail Secure 12v or 24v $1,894.00 $2,126.00 $2,020.00 $2,252.00


PRK design available in 04, 10, 13, 15 functions (Not available in Stainless Steel.) From ET Price Deduct 107.00



9800, 12-9800 4 97-2578 17.76 Pack


*9875, *9876 function is not available in 12- prefix



ED-44EXIT DEVICES




PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available w/10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V-10 prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices Add $127.00 21 SARGENT Construction Key System (lost ball) Add $10.00 / cyl.22 SARGENT Construction Key System (split key) Add $10.00 / cyl.23 ANSI Flat Lip Strike (8300, 8900, 9900 including 12- prefix) No addition 31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $47.00 37 Spanner head screws Add $31.00 54 Internal Micro Switch in ET Control Add $183.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 6573 Small Format 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.65737P Small Format 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 / cyl.70 Small Format Interchangeable Disposable plastic Construction Core No addition 72 Small Format Interchangeable 6-Pin Construction Core (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.75 Warning Inside-Knurled crossbar Add $71.00 76 Warning outside-Milled outside lever Add $56.00 77 Warning inside and outside-Knurled crossbar, Abrasive Coating on Lever Add $127.00 81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition F182 SARGENT Keso Security, patent pending, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patent pending, removable core cylinder – new key systems Add $67.00 / cyl.82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes)Add $18.00 /cyl.SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SG MicroShield™ an antimicrobial powder coat (not available with 10B) Add $52.00 VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section



NOTESET trim supplied with 26D finish in lieu of 32DSC/SE-Prefix not available in 04, 75, 76 ET Trim functionsReinforced Crossbar (90 Series) Add 63.00Center Bearing Bracket for door 48" and over when ordered with Device (90 Series) Add 188.00

ED-45EXIT DEVICES

9900 SERIES






PTBSTS-MAL-FLL-FLW

9900 Series-Mortise Device

Finish

10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL, 10, 3, 4, 9, 10BL,

Function 10B, 32D 20D, 32, 10B, 32D 20D, 32 10B, 32D 20D, 32

9910 Exit Only No Trim $1,530.00 $1,779.00

9910 Dummy Trim $1,947.00 $2,196.00 $2,088.00 $2,337.00 $1,783.00 $2,032.00

9904 Key retracts latchbolt $1,947.00 * $2,196.00* $2,088.00* $2,337.00* $1,783.00 $2,032.00





Electro-Mechanical

9970* Fail Safe 12v or 24v $2,200.00 $2,449.00

9971* Fail Secure 12v or 24v $2,200.00 $2,449.00

9975* Fail Safe 12v or 24v $2,260.00* $2,509.00* $2,386.00* $2,635.00*

9976* Fail Secure 12v or 24v $2,260.00* $2,509.00* $2,386.00* $2,635.00*


PRK design available in 04, 10, 13, 15 functions (Not available in Stainless Steel.) From ET price deduct 107.00

9900, 12-9900 4 97-2578 17.76 Pack No.


*Not available with Arrow, Best, Falcon Interchangeable Core Prefixes, SC + SE Cylinders, and V-10 Cylinders.

Cylinders not included when ordered less trim




ED-46EXIT DEVICES

ET LEVER CONTROL TRIM



700 Series ET Lever Type Trim Function Series (Available as Listed)

Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

704 8304, 12-8304, 8504, 8804, 12-8804, 8888, 12-8888, 8904, 12-8904,

9804, 12-9804, 9904, 12-9904

706 8706, 12-8706, 9706, 12-9706

706-4 8406, 12-MD8406, WD8606, 12-WD8606, MD8606, 12-MD8606

706-6 SP8606, PP8606, PR8606, LS8606, LP8606, LR8606

706-8 8506, SP8706, PP8706, PR8706, 8806, NB8706

710 8310, 12-8310, 8510, 8710, 12-8710, 8810, 12-8810, 8888, 12-8888, NB8710,

8910, 12-8910, 9710, 12-9710, 9810, 12-9810, 9910, 12-9910, SP8710, PP8710, PR8710

710-4 8410, 12-MD8410, WD8610, 12-WD8610, MD8610, 12-MD8610

710-6 SP8610, PP8610, PR8610, LS8610, LP8610, LR8610

713 8313, 12-8313, 8713, 12-8713, 8913, 12-8913, 9713, $417.00

12-9713, 9813, 12-9813, 9913, 12-9913

713-4 8413, 12-MD8413, WD8613, 12-WD8613, MD8613, 12-MD8613

713-6 SP8613, PP8613, PR8613, LS8613, LP8613, LR8613

713-8 8513, 8888, 12-8888, 8813, 12-8813, SP8713, PP8713, PR8713, NB8713

715 8315, 12-8315, 8715, 12-8715, 8915, 12-8915, 9715,

12-9715, 9815, 12-9815, 9915, 12-9915

715-4 8415, 12-MD8415, WD8615, 12-WD8615, MD8615, 12-MD8615

715-6 SP8615, PP8615, PR8615, LS8615, LP8615, LR8615

715-8 8515, 8888, 12-8888, 8815, 12-8815, SP8715, PP8715, PR8715, NB8715

716 8816, 12-8816, 8916, 12-8916

773 8773, 12-8773, 9773, 12-9773

773-4 8473, 12-MD8473, WD8673, 12-WD8673, MD8673, 12-MD8673

773-6 SP8673, PP8673, PR8673, LS8673, LP8673, LR8673

773-8 8573, SP8773, PP8773, PR8773, NB8773

774 8774, 12-8774, 9774, 12-9774 $589.00

774-4 8474, 12-MD8474, WD8674, 12-WD8674, MD8674, 12-MD8674

774-6 SP8674, PP8674, PR8674, LS8674, LP8674, LR8674

774-8 8574, SP8774, PP8774, PR8774, NB8774

775 8375, 12-8375, 8975, 12-8975, 9875, 9975, 12-9975

775-8 8875, 12-8875$730.00

776 8376, 12-8376, 8976, 12-8976, 9876, 9976, 12-9976

776-8 8876, 12-8876

* Available in 12v or 24v. Please specify voltage required when ordering.


Note: All Exit Trim is priced with cylinder where required. How to order: Trim # x Lever Design – Example: 704ETP x Finish.

*

*

*

*

*

*

*

*

*

*

*

*

ED-47EXIT DEVICES

FREEWHEELINGET LEVER CONTROL TRIM



740 Series Freewheeling ET Lever Type Trim Function Series (Available as Listed)

Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

740 8340, 12-8340, 8540, 8740, 12-8740, SP8740, PP8740, PR8740

8840, 12-8840, 8888, 12-8888, 8940,12-8940, NB8740

740-4 8440, 12-MD8440, WD8640, 12-WD8640, MD8640, 12-MD8640

740-6 SP8640, PP8640, PR8640, LS8640, LP8640, LR8640

743 8343, 12-8343, 8743, 12-8743, 8943, 12-8943

743-4 8443, 12-MD8443, WD8643, 12-WD8643, MD8643, 12-MD8643

743-6 SP8643, PP8643, PR8643, LS8643, LP8643, LR8643 $417.00

*743-8 8543, 8888, 12-8888, 8843, 12-8843,SP8743, PP8743, PR8743, NB8743

744 8344, 12-8344, 8544, 8844, 12-8844, 8888, 12-8888, 8944, 12-8944

746 8746, 12-8746

746-4 8446, 12-MD8446, WD8646, 12-WD8646, MD8646, 12-MD8646

746-6 SP8646, PP8646, PR8646, LS8646, LP8646, LR8646

746-8 SP8746, PP8746, PR8746, NB8746, 8888, 12-8888, 8846, 12-8846

FreewheelingET Control

Lever A-B-E-F-J-L-P-WNote: All Exit Trim is priced with cylinder where required.How to order: Trim # x Lever Design – Example: 704ETP x Finish.

*Freewheeling trim ordered separately for 8888.

ETY Shown

C G R S

ED-48EXIT DEVICES

ET LEVER CONTROL TRIMCOASTAL SERIES DESIGN




Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

704 8304, 12-8304, 8504, 8804, 12-8804, 8888, 12-8888, 8904, 12-8904,

9804, 12-9804, 9904, 12-9904

706 8706, 12-8706, 9706, 12-9706

706-4 8406, 12-MD8406, WD8606, 12-WD8606, MD8606, 12-MD8606

706-6 SP8606, PP8606, PR8606, LS8606, LP8606, LR8606

706-8 8506, SP8706, PP8706, PR8706, 8806, NB8706

710 8310, 12-8310, 8510, 8710, 12-8710, 8810, 12-8810, 8888, 12-8888, NB8710

8910, 12-8910, 9710, 12-9710, 9810, 12-9810, 9910, 12-9910, SP8710, PP8710, PR8710

710-4 8410, 12-MD8410, WD8610, 12-WD8610, MD8610, 12-MD8610

710-6 SP8610, PP8610, PR8610, LS8610, LP8610, LR8610

713 8313, 12-8313, 8713, 12-8713, 8913, 12-8913, 9713, $558.00

12-9713, 9813, 12-9813, 9913, 12-9913

713-4 8413, 12-MD8413, WD8613, 12-WD8613, MD8613, 12-MD8613

713-6 SP8613, PP8613, PR8613, LS8613, LP8613, LR8613

713-8 8513, 8888, 12-8888, 8813, 12-8813, SP8713, PP8713, PR8713, NB8713

715 8315, 12-8315, 8715, 12-8715, 8915, 12-8915, 9715,

12-9715, 9815, 12-9815, 9915, 12-9915

715-4 8415, 12-MD8415, WD8615, 12-WD8615, MD8615, 12-MD8615

715-6 SP8615, PP8615, PR8615, LS8615, LP8615, LR8615

715-8 8515, 8888, 12-8888, 8815, 12-8815, SP8715, PP8715, PR8715, NB8715

716 8816, 12-8816, 8916, 12-8916

773 8773, 12-8773, 9773, 12-9773

773-4 8473, 12-MD8473, WD8673, 12-WD8673, MD8673, 12-MD8673

773-6 SP8673, PP8673, PR8673, LS8673, LP8673, LR8673

773-8 8573, SP8773, PP8773, PR8773, NB8773

774 8774, 12-8774, 9774, 12-9774 $714.00

774-4 8474, 12-MD8474, WD8674, 12-WD8674, MD8674, 12-MD8674

774-6 SP8674, PP8674, PR8674, LS8674, LP8674, LR8674

774-8 8574, SP8774, PP8774, PR8774, NB8774

775 8375, 12-8375, 8975, 12-8975, 9875, 9975, 12-9975

775-8 8875, 12-8875$856.00

776 8376, 12-8376, 8976, 12-8976, 9876, 9976, 12-9976

776-8 8876, 12-8876

* Available in 12v or 24v. Please specify voltage required when ordering.

Note: All Exit Trim is priced with cylinder where required.How to order: Trim # x Lever Design – Example: 704ETY x Finish.

*

*

*

*

*

*

*

*

*

*

*

*

ED-49EXIT DEVICES

FREEWHEELINGET LEVER CONTROL TRIMCOASTAL SERIES DESIGN


Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

740 8340, 12-8340, 8540, 8740, 12-8740, SP8740, PP8740, PR8740

8840, 12-8840, 8888, 12-8888, 8940,12-8940, NB8740

740-4 8440, 12-MD8440, WD8640, 12-WD8640, MD8640, 12-MD8640

740-6 SP8640, PP8640, PR8640, LS8640, LP8640, LR8640

743 8343, 12-8343, 8743, 12-8743, 8943, 12-8943

743-4 8443, 12-MD8443, WD8643, 12-WD8643, MD8643, 12-MD8643

743-6 SP8643, PP8643, PR8643, LS8643, LP8643, LR8643 $558.00

*743-8 8543, 8888, 12-8888, 8843, 12-8843,SP8743, PP8743, PR8743, NB8743

744 8344, 12-8344, 8544, 8844, 12-8844, 8888, 12-8888, 8944, 12-8944

746 8746, 12-8746

746-4 8446, 12-MD8446, WD8646, 12-WD8646, MD8646, 12-MD8646

746-6 SP8646, PP8646, PR8646, LS8646, LP8646, LR8646

746-8 SP8746, PP8746, PR8746, NB8746, 8888, 12-8888, 8846, 12-8846


ETY Shown

C G R SNote: All Exit Trim is priced with cylinder where required.How to order: Trim # x Lever Design – Example: 704ETY x Finish.



ED-50EXIT DEVICES

ET LEVER CONTROL TRIM STUDIO COLLECTION – METRO ELEMENTS




Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D704 8304, 12-8304, 8504, 8804, 12-8804, 8888, 12-8888, 8904, 12-8904,

9804, 12-9804, 9904, 12-9904706 8706, 12-8706, 9706, 12-9706706-4 8406, 12-MD8406, WD8606, 12-WD8606, MD8606, 12-MD8606706-6 SP8606, PP8606, PR8606, LS8606, LP8606, LR8606706-8 8506, SP8706, PP8706, PR8706, 8806, NB8706710 8310, 12-8310, 8510, 8710, 12-8710, 8810, 12-8810, 8888, 12-8888, NB8710,

8910, 12-8910, 9710, 12-9710, 9810, 12-9810, 9910, 12-9910, SP8710, PP8710, PR8710710-4 8410, 12-MD8410, WD8610, 12-WD8610, MD8610, 12-MD8610710-6 SP8610, PP8610, PR8610, LS8610, LP8610, LR8610713 8313, 12-8313, 8713, 12-8713, 8913, 12-8913, 9713, $558.00

12-9713, 9813, 12-9813, 9913, 12-9913713-4 8413, 12-MD8413, WD8613, 12-WD8613, MD8613, 12-MD8613713-6 SP8613, PP8613, PR8613, LS8613, LP8613, LR8613713-8 8513, 8888, 12-8888, 8813, 12-8813, SP8713, PP8713, PR8713, NB8713715 8315, 12-8315, 8715, 12-8715, 8915, 12-8915, 9715,

12-9715, 9815, 12-9815, 9915, 12-9915715-4 8415, 12-MD8415, WD8615, 12-WD8615, MD8615, 12-MD8615715-6 SP8615, PP8615, PR8615, LS8615, LP8615, LR8615715-8 8515, 8888, 12-8888, 8815, 12-8815, SP8715, PP8715, PR8715, NB8715716 8816, 12-8816, 8916, 12-8916773 8773, 12-8773, 9773, 12-9773773-4 8473, 12-MD8473, WD8673, 12-WD8673, MD8673, 12-MD8673773-6 SP8673, PP8673, PR8673, LS8673, LP8673, LR8673773-8 8573, SP8773, PP8773, PR8773, NB8773774 8774, 12-8774, 9774, 12-9774 $714.00 774-4 8474, 12-MD8474, WD8674, 12-WD8674, MD8674, 12-MD8674774-6 SP8674, PP8674, PR8674, LS8674, LP8674, LR8674774-8 8574, SP8774, PP8774, PR8774, NB8774775 8375, 12-8375, 8975, 12-8975, 9875, 9975, 12-9975775-8 8875, 12-8875

$856.00 776 8376, 12-8376, 8976, 12-8976, 9876, 9976, 12-9976776-8 8876, 12-8876* Available in 12v or 24v. Please specify voltage required when ordering.

Note: All Exit Trim is priced with cylinder where required.

************

Escutcheon Design: Lever Series Designs: How to order: 704ETMM x RH x 26DET Centro Notting Hill Aventura Rialto Odeon Function 704

MC *MQ MA MO *MN Rose ETMD MR MB *ML *MH Lever MMMJ *MT ME *MK Hand RHMP *MM MF *MS Finish 26D

MG *MUMI *MVMW


ED-51EXIT DEVICES

FREEWHEELINGET LEVER CONTROL TRIM

STUDIO COLLECTION – METRO ELEMENTS




Finish

TRIM# EXITS 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

740 8340, 12-8340, 8540, 8740, 12-8740, SP8740, PP8740, PR8740

8840, 12-8840, 8888, 12-8888, 8940,12-8940, NB8740

740-4 8440, 12-MD8440, WD8640, 12-WD8640, MD8640, 12-MD8640

740-6 SP8640, PP8640, PR8640, LS8640, LP8640, LR8640

743 8343, 12-8343, 8743, 12-8743, 8943, 12-8943

743-4 8443, 12-MD8443, WD8643, 12-WD8643, MD8643, 12-MD8643

743-6 SP8643, PP8643, PR8643, LS8643, LP8643, LR8643 $558.00

*743-8 8543, 8888, 12-8888, 8843, 12-8843,SP8743, PP8743, PR8743, NB8743

744 8344, 12-8344, 8544, 8844, 12-8844, 8888, 12-8888, 8944, 12-8944

746 8746, 12-8746

746-4 8446, 12-MD8446, WD8646, 12-WD8646, MD8646, 12-MD8646

746-6 SP8646, PP8646, PR8646, LS8646, LP8646, LR8646

746-8 SP8746, PP8746, PR8746, NB8746, 8888, 12-8888, 8846, 12-8846


Escutcheon Design: Lever Series Designs: How to order: 740ETMM x RH x 26DET Centro Notting Hill Aventura Rialto Odeon Function 740

MC *MQ MA MO *MN Rose ETMD MR MB *ML *MH Lever MMMJ *MT ME *MK Hand RHMP *MM MF *MS Finish 26D

MG *MUMI *MVMW


ED-52EXIT DEVICES

PULL & THUMBPIECE TRIM



800 Series Pull & Thumbpiece Trim

Function All Finishes

802PTB Blank Plate w/screw holes $172.00

812PTBDT 10

812PTB 04

832PTB 62, 63, 66, 70, 71 $253.00

842PTB 28

88KPSB** 8804/8888 only

876STSDT 10

876STS 04

886STS 28$253.00

896STS 62, 63, 66, 70, 71

874FLLDT 10

874FLL 04

884FLL 28 $253.00

894FLL 62, 63, 66, 70, 71

88KFSL** 8804/8888 only

813FLWDT* 10

813FLW* 04

843FLW* 28 $253.00

833FLW* 62, 63, 66, 70, 71

88KFSW** 8804/8888 only

818MALDT 10

818MAL 04

828MAL 28 $253.00

838MAL 62, 63, 66, 70, 71

88KMSL** 8804/8888 only

800 Series Offset Pull 32D 3, 4, 10, 10B, 32

862 10" Pull – 1" Diameter $162.00 174.00

863 18" Pull – 1" Diameter $202.00 214.00

864 10" Pull – 3/4" Diameter $141.00 153.00

*FLW, FSW Trim Not Available in Stainless Steel.

**PSB, FSL, FSW, MSL for use with 8804/8888 Exits only. Supplied with revised cylinder hole location and thrubolting.

PTB/PSB** STS FLL/FSL** FLW*/FSW* MAL/MSL** 862 863 864

ED-53EXIT DEVICES

MISCELLANEOUS TRIM



Auxiliary Outside Controls Finish

Number Series (Available as Listed) 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D, 32, 32D

106 8400, WD8600, MD8600

113 8400, WD8600, MD8600

306 8700, 12-8700, 9700, 12-9700$417.00

313 8700, 12-8700, 9700, 12-9700

NB-306 NB8700

NB-313 NB8700

Note: Cannot be used with PP/SP/PR8700 & 8600 Devices.

Auxiliary Control

PRK

FinishPRK Design (For use w/90Series Exits Only) 3, 4, 9, 10, 10B, 10BL, 20D, 26, 26D

819-PRK-DTTB 10

819-PRKTB 04

829-PRKTB 15 $310.00

839-PRKTB 06, 13, 16

TB= Thrubolt standard

80 Series Push Bar Only- No Trim Finish

Function 10, 10B, 32D 3, 4, 9, 10BL, 15, 20D, 32

8893 Inactive Rail $484.00 $537.00

*8895 Active Rail $521.00 $572.00 Thru Bolt Application Pack Part # Finish

No. Bolts per pack 1-3/4" Dr. 2-1/4" Dr. 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26D

8800 4 68-2279 68-2280 $17.76 Pack


*55- For 8895 – Signal Switch in Rail Add 183.00

Anti-Vandal Pull Trim PriceCatalog # Description 32D

821 used with MD/WD8610, 8710, 8810, 9710, 9810 $365.00

824 used with 8904, 9904 $365.00

826 used with 8804 (mfg. after 2/2001) $365.00

827 used with 8910, 9910 $365.00

ED-54EXIT DEVICES

MULLIONS & ACCESSORIES



Mullion Adapters502 Bottom Retainer Pack for 980 $96.00507 Adaptor for narrow transom bars (Aluminum x prime) for 980 $35.00507A Adaptor for narrow transom bars (Aluminum x anodized) for 980A $50.00511 Top Retainer Pack for 980 $92.00601 Top Retainer Shim Kit for All Steel Mullions $31.00RK980 Latchbolt Assembly Retrofit Kit (Includes Top & Bottom Retainers for L980S $400.0094-2050 Top Retainer Pack for 650A $101.8494-2051 Bottom Retainer Pack for 650A $101.8498-2190 Top Retainer Pack for 12-980 $132.0098-2191 Bottom Retainer Pack for 12-980 $87.6198-2525 Bottom Retainer Pack for L980 $87.6198-2526 Top Retainer Pack for L980 $87.6198-2556 Bottom Retainer Pack for 12-L980 $87.6198-2558 Top Retainer Pack for EL980 $132.0098-2559 Top Retainer Pack for 12-L980 $132.0098-2578 Wall Mounting Kit for L980 $135.0098-2579 Wall Mounting Kit for L980S $195.0098-2580 Wall Mounting Kit for EL980 $195.0098-2599 Top Retainer Pack for HC980, 12-HC980, and 12-HD980 $140.0098-2593 Top Retainer Pack for HCL980 & 12-HCL980 $140.0098-2594 Bottom Retainer Pack for HCL980 & 12-HCL980 $140.0098-2600 Bottom Retainer Pack for HC980, 12-HC980, and 12-HD980 $140.00

Mullions Description 10B 28 Prime Coat

650A Removable Mullion - Alum. Anodized - used w/8500 ser. Exit Device only $1,119.00 $834.00

980 Removable Mullion - Extruded Aluminum $428.00

980A Removable Mullion - Aluminum Anodized $1,164.00 $867.00

980S Removable Mullion - Steel - Non-Fire Rated - Red Primer Finish $428.00

HC980 Hurricane Code Mullion - Steel $636.00

HCL980 Lockable Hurricane Code Mullion - Steel $994.00

12-980 Removable Mullion - Steel - U.L. Fire Rated $555.00

12-HC980 Hurricane Code Mullion - Steel - U.L. Fire Rated $763.00

12-HCL980 Hurricane Code Lockable Mullion - Steel - U.L. Fire Rated $1,121.00

12-HD980 UL fire Listed up to 3 hours on 4' x 10' single door applications

and 8' x 10' double door applications (w/12-8800 Rim Device) $763.00

L980 Lockable Mullion - Aluminum $786.00

L980A Lockable Mullion - Aluminum Anodized $1,523.00$1,228.00

L980S Lockable Mullion - Steel - Non-Fire Rated - Red Primer Finish $786.00

12-L980 Lockable Mullion - Steel - U.L. Fire Rated $913.00

EL980 Lockable Mullion - Steel - Electric - Max height is 96" - consult factory for other. $963.00

651 Mullion Stabilizer Kit - included w/650A Mullion $31.00

988 Surface Bolt Kit - Used in Hurricane Code applications – Bright Zinc Plated Finish $79.00

Note: Mullion standard stock size is 96". The UL listed products are available as 8' only. This covers all 12- mullions with the

exception of 12-HD980 which comes standard at 120".

120" Height Available: Add $94.00 for 120" mullionEL980: Consult Factory

ED-55EXIT DEVICES

ACCESSORIES



Exit Device Mortise Locks Finish(less cylinders) 3, 4, 10, 10B, 10BL, 20D, 26, 26D904, 910, 913, 915, 916, 928, 940, 944, 963, 966, 973, 974, 975, 976, 977, 978 – specify hand when ordering $446.00 970 and 971 – specify hand when ordering $853.00 Cylinder Dogging Kits (80 Series) 3, 4, 10, 10B, 20D, 32, 32D, EN, EB,ED816-1 For use with Wide Stile E & F Rail816-2 For use with Narrow Stile E & F Rail816-3 For use with Wide Stile G Rail $136.00 816-4 For use with Narrow Stile G Rail and Wide Stile J Rail816-5 For use with Wide Stile E Rail816-6 For use with Narrow Stile J railVertical Rod Extension 3, 4, 10, 10B, 20D, 26, 26D, 32, 32D, EN, EB, ED570 Rod Connector Kit (68-2745) $31.00 571-6 6" Rod Extension Kit for 9700/2700/3700 (old style 8700) $56.00 571-12 12" Rod Extension Kit for 9700/2700/3700 (old style 8700) $71.00 571-18 18" Rod Extension Kit for 9700/2700/3700 (old style 8700) $75.00 687-6 Top Rod for 8700 41" AFF – 90" Door (new style 8700’s), PP/PR/SP8700 $61.00 687-12 Top Rod for 8700 41" AFF – 96" Door (new style 8700’s), PP/PR/SP8700 $71.00 687-18 Top Rod for 8700 41" AFF – 102" Door (new style 8700’s), PP/PR/SP8700 $75.00 *Glass Bead Shim Kits (1/4" thick) ED, EN, EB, EP, EAB, ER558 For 3828 and 12-3828 $81.00 559 For 3727 and 12-3727 $96.00 568 For 2828 $81.00 587 For 8700, Exit Devices $103.00 588 For 2727 $100.00 589 For 8600, 12-8600, NB8700, 8800, 12-8800, 8900, 12-8900 Exit Devices $81.00 668 For 12-8300, 12-8400, 8500 $77.00 12-568 For 12-2828 $100.00 12-587 For 12-8700 $100.00 12-598 For 12-2727 $100.00 *Note: Shim kits may offset outside trim. Longer spindles and thru bolts may be required. Consult factory.

545-1 For use with 8F Wide Rails $443.00 545-2 For use with 8F & 8E Narrow Rails $443.00 545-3 For use with 8G Wide Rails $443.00 545-4 For use with 8G Narrow & 8J Wide Rails $443.00 545-6 For use with 8J Narrow Rails $443.00 Touch Pad Black809 Lexan Touchpad for 80 series $28.00 807 SARGuide™ – Lamp Replacement Kit $50.00 Miscellaneous565 Metal End Cap Kit $47.00 576 Bottom Pullman Bolt Conversion Kit $239.00 665 Flush end Cap $47.00 584K Wood Door Kit $43.00

Door Coordinators 10, 26D3487 Door Coordinator (6-3/4") $370.00

3488 Door Coordinator (8-5/8") $370.00

3497 Carry Open Bar $98.00

AL-Retrofit Kit Finish

(Used to modify existing exit devices to Alarmed- for 8300, MD/WD 8600, and 8900 only) 3, 4, 9, 10, 10B, 10BL, 20D, 32, 32D

ED-56EXIT DEVICES

ACCESSORIES



607 ET Locking Slide Replacement Kits – Kits include a new screw, lead washer, spring and locking slide.

Retrofits to all existing trims.

Part # Price

607-1 For all 713 Lockable ET Controls

607-2 For all 706 Lockable ET Controls

607-3 For all 743 Freewheeling ET Controls $81.00

607-4 For all 746 Freewheeling ET Controls

607-5 For all 746-6 Freewheeling ET Controls

730 Retrofit Kits – ET Spindle Retrofit Kit – Includes Spindle, Retainer Plate, Screw & Washer

Part # Price

730-1 700 Series Spindle 1-3/4" Door

730-2 700 Series Spindle 2" Door

730-3 700 Series Spindle 2-1/4" Door

730-4 700-4 Series Spindle 1-3/4" Door

730-5 700-4 Series Spindle 2" Door $37.00



730-8 700-8 Series Spindle 2" Door


ET trim Retrofit Kit 3, 4, 10, 10B

Part # Description 20D, 26, 26D

688 Retrofit Kit – used with 700 Series ET trim for direct bolt-on to existing Von Duprin preps $86.00

ED-57EXIT DEVICES

STRIKES



Part Black

Number Description Nylon Coated

605 Top Plate - MD/WD8600, 12-MD8600 $82.45

606 Standard Bottom Strike - 12-MD8400, (12)MD8600, (12)WD8600 $43.80

613 Alternate Half Mortise Strike - 2828, 3828, 8800, 9800 $43.80

624 Standard Bottom Strike - 2727, 3727, 8700, 9700 $43.80

642 Full Mortise Strike - 2828, 3828, 8800, 9800 $43.80

644 Surface or Double Dr Strike 2828, 3828, 8800, 9800 $56.69

646 Top Strike - (12)2727, (12)3727, (12)(14)(NB)8700, (12)(14)9700 $59.27

648 Flush Panel Strike - 2727, 3727, 8700, 9700 $64.43

649 Standard Strike - (12)2828, (12)3828, 5100, (12)5800, 8500,

(12)8800, (12)8888, (12)9800, (12)9898 $60.56

650 Top Strike - (12)(NB)MD8400, (12)(NB)MD8600, (12)WD8600 $25.76

653 Alternate Bottom Strike - 12-2727, 12-3727, 12-8700, 12-9700 $87.61

654 Top Plate - 12-2727, 12-3727, 12-8700, (12)HC8700 $64.43

655 Standard Bottom Strike 12-2727, 12-3727, 12-8700, (12)HC8700, 12-9700,

12-9700, 14-8700, 14-9700 $25.76

655 Alternate Bottom Strike - 2727, 3727, 8700, 9700 $25.76

657 Standard Strike - 8500(single door) $82.45

658 Standard Strike - 650A mullion $43.80

658 Alternate Strike - 8500, 8800 $43.80

** 815 Open Back Strike - 8300, 8900, 9900 - for door thickness over 1-3/4", consult factory $60.56

908 Flat lip strike 8300, 8900, 9900 $25.76

** C908 Curved lip strike 8300, 8900, 9900 - for door thickness over 2-1/4", consult factory $25.76

608 Flush Panel Adaptor - 12-8700, 12-9700 $82.45

68-1183 Double lipped mortise strike LR8600, PR8600, PR8700 $64.93

C7710 Mortise center case strike LS8600, SP8600, SP8700 $25.76

** When ordering, specify hand (RHR or LHR)

649 Shim Plate Prime Coat Gray

98-0036 Shim for 649 Strike $18.58



ED-58EXIT DEVICES

PARTS

Part No. Price Part No. Price01-0005 Retaining Ring $0.4801-0007 Groove Pin $0.7101-0008 Groove Pin $0.7101-0009 Groove Pin $2.4601-0011 Lock Washer $0.4801-0013 Machine Screw $0.9601-0014 Screw $1.9001-0048 Roll Pin $0.7101-0074 Retaining Ring $0.7101-0084 Retaining Ring $0.7101-0098 Retaining Ring $0.7101-0204 5/22" washer $0.71

* 01-0225 C -sunk washers (TB mounting) $2.7401-0227 15/64" lock washer $0.4801-0273 Roll Pin $0.7101-0288 Socket screw key $2.8701-0401 Spiral Pin $1.5001-0402 Roll Pin $0.7101-0408 Washer $0.7101-0461 Spiral Pin $0.9601-0476 Nyliner $0.6801-0496 Cable clamp $0.6801-0507 Cable clamp $0.9001-0550 Lead washer $2.8701-0610 Wave Spring Washer $1.9001-0669 3/8" - 16 UNC flex lock nut $2.8701-0695 Spiral Pin $0.9401-0696 Spiral Pin $0.7101-0697 Spiral Pin $0.7101-0700 “O” Ring $2.3501-0701 Spiral Pin $1.4201-0704 Socket Head Set Screw $1.2401-0710 Washer (.012" thick) $0.7101-0711 Flanged Nyliner $1.2401-0712 Rubber Bumper $0.9201-0715 Lock Washer $0.7101-0749 Groove Pin $0.7101-0766 Hex Machine Screw Nut $0.4801-0773 Washer (.008" thick) $0.7101-0797 Spiral Pin $1.5001-0836 Spiral Pin 1/8" x 7/8" HDP $0.8301-1095 Set Screw $0.4801-1121 #3-48 x 5/16" fl. hd. machine screw $0.1901-1137 Screw #8-32 x 7/16" $0.96

* 01-1141 8-32 x 3/8" Ph. Machine Screw $0.9601-1142 8-32 x UNC - 2A x 1/4" Screw $0.5201-1145 #4-40 x 1/4" Ph. Mach. Screw $0.6801-1146 #8-32 x 3/8" Ph. Fl. Screw $0.6801-1182 Socket head cap screw $1.7801-1183 Truss head machine screw $0.4801-1190 Self tapping screw $1.24

* 01-1209 #8-32 x 1/2" Machine Screw $1.5001-1484 Machine Screw & Washer (01-0011) $0.4801-1493 Bar Locking Screw $1.2901-1494 Bar Locking Screw (90) $1.29

* 01-2089 #10 x 1" Wood Screw $1.2401-2455 10 x 1-1/4" Ph. Rd. Wood Screw $1.24

* 01-3192 #10-24 x 3/4" machine screw $0.7101-3384 #8-32 x 7/16" Ph. Fl. Mach. Screw $0.71

* 01-3454 1/4” - 20 x 1-1/4” machine screw $1.78* 01-3458 1/4” - 20 x 2-1/4” machine screw $1.24

01-3563 01-3563 #5- 40 x 1/4" machine screw $0.7101-3565 #5- 40 x 3/8" machine screw $0.9601-3579 6-32 x 1/16” Ph. Rd. Hd. screw $0.4501-3582 #6-32 x 3/8" machine screw $0.71

* 01-3595 #8-32 x 1/4" machine screw $0.7101-3622 #10-24 x 3/4" machine screw $1.2401-4011 #6-32 x 5/16" machine screw $0.4501-4195 4-40 x 3/8" machine screw $0.4501-4372 Thru bolts 2" Dr. 700, 700-5, 716 ET $3.5501-4373 Thru bolts 2" 1/4" Dr. 700, 700-5, 716 ET $3.7401-4442 #10-24 x 1-5/8" machine screw $0.96

* 01-4445 1/4" - 20 x 1-1/2" machine screw $1.2401-4451 Thru bolts 1-3/4" Dr. 700, 700-5, 700-1, 716 ET $1.2401-4464 Screw for FW Trim $1.1601-4537 Standard Hole Plug $0.4001-4540 Screws for motorized ET $0.6601-5001 #10-24 x 3/4" combination screw $0.93

* 08-4320 Plain knob assembly $66.6413-0074 Screw $0.4813-0075 Rim cylinder connecting screw 2-1/4" $1.2213-0080 Rim cylinder barrel retainer $1.1113-0085 Rim cylinder locking tail $1.1113-0086 Rim cylinder back plate $1.6213-0180 ET rail cylinder nut $2.8313-0660 Standard cam $2.8113-0664 Slotted cam $2.8113-2099 Cylinder Retainer Pack for 8504/8544 functions $20.6513-2162 Cylinder Attachment RH $47.75

* 21-0165 Grip $141.64* 28-0005 2710 & 2727 Cover $36.16* 28-0006 2828 Cover $36.16* 28-0018 Push Rail “E” $83.90* 28-0019 Push Rail “F” $83.90* 28-0021 Push Rail “G” $83.90

28-0026 Pivot Pin $4.2528-0033 Main slide pin $4.2228-0035 Main slide $50.6328-0036 Lift lever $21.6928-0037 Slide guide pin $1.8428-0038 Latchbolt lever $2.8128-0109 Cam $0.92

* 28-0110 End cap (30) $13.02* 28-0111 3828 Series Chassis Cover $92.16* 28-0116 3727 Cover $92.16* 28-0119 Top & Bottom – 3727Cover $36.16* 28-2011 Rail Assy. Cam Lockdown “E” (24" - 30") $245.87* 28-2012 Rail Assy. Cam Lockdown “F” (30" - 36") (20) $245.87* 28-2014 Rail Assy. Cam Lockdown “G” (36" - 48") (20) $245.87* 28-2026 Screw Pk $5.26

28-2028 2710 Chassis Assy. less cover LHRB $159.1028-2029 2710 Chassis Assy. less cover RHRB $159.10

* 28-2066 12- Rail Assy. E (24" - 30") (20) $240.09* 28-2067 12- Rail Assy. F (30" - 36") (20) $240.09

*Specify hardware or painted finish required. Consult catalog for available finishes.



ED-59EXIT DEVICES

PARTS

* 28-2069 12- Rail Assy. G (36" - 48") (20) $240.0928-2145 2828 Chassis Assy. less cover – Old Style $94.0228-2146 12-2828 Chassis Assy. less cover – Old Style $224.1828-2147 2800 CTR Case Pack – New Style $195.2628-2148 12-2800 CTR Case Pack – New Style $347.1228-2157 2727 Chassis Assy. less cover LHRB – Old Style$173.5628-2158 2727 Chassis Assy. less cover RHRB – Old Style$173.5628-2408 New 2828/3828 Chas Asy Less Cvr $94.0228-2409 12- 20/30 Chassis Asy less Cvr – New Style $224.1828-2427 New 2737/3727 Chassis Asy less Cvr $173.5628-2428 New 2727/3727 R Chas Asy Less Cvr $173.56

* 28-2435 3828 Center Case Pack $199.16* 28-2446 30 Ser Rl Asy E Cam Lockdown (24" - 30") $232.02* 28-2447 30 Ser Rl Asy F Cam Lockdown (30" - 36") $232.02* 28-2448 30 Ser Rl Asy G Cam Lockdown (36" - 48") $232.02* 28-2449 30 Ser Rl Asy E 16- (28" - 32") $322.26* 28-2450 30 Ser Rl Asy F 16- (32" - 36") $322.26* 28-2451 30 Ser Rl Asy G 16- (44" - 48") $322.26* 28-2452 30 Ser Rl Asy E 12- (24" - 30") $286.16* 28-2453 30 Ser Rl Asy F 12- (30" - 36") $286.16* 28-2454 30 Ser Rl Asy G 12- (36" - 48") $286.16* 28-2457 Top Latch Asy $179.61* 28-2491 3727 Bottom Chassis Asy w/ Cvr $159.10* 28-2492 12-3727 Bottom Case Asy w/ Cvr $247.32* 28-2493 12-3727 Top Case Asy w/ Cvr $260.34* 28-2494 3727 Top Case Asy w/ Cvr $177.89

32-1213 Bracket for 5100 $16.2132-1254 Machine screw $0.5852-2285 Mullion Wire Conn. Assy. $214.5052-2558 59-80 Circuit Brd asy $393.0652-2997 57- F Circuit Board Kit $433.9852-2998 57-J Circuit Board Kit $433.9852-2999 57- G Circuit Board Kit $433.9852-5052 59-Circuit Brd Repl. Kit $520.77

* 68-0003 Top Rod 8700 $73.8168-0011 Main Slide Asy - MD8600 $7.7468-0014 Main Slide Asy - LH (8400) $9.6768-0015 Main Slide Asy - RH (8400) $9.6768-0016 Skid Pad $2.1368-0037 Bottom Case (8400) $10.3168-0044 SP/PP/PR8600 $31.5768-0046 LP/LR/SL8600 $27.05

* 68-0201 Mtg. Rail 8893E $250.80* 68-0202 Mtg. Rail 8893F $250.80* 68-0204 Mtg. Rail 8893G $250.80* 68-0229 Pivot Pin (Push Rail) $20.50

68-0233 Mounting Plate $22.7068-0236 Connecting Arm Spring $3.7468-0237 latchbolt Lever LHRB $12.4468-0238 latchbolt Lever RHRB $12.4468-0239 Lift Arm Pivot Pin $6.9768-0241 Lift Arm $22.7068-0260 Thumb Piece Lever LHRB $66.1568-0261 Thumb Piece Lever RHRB $66.1568-0271 Pivot Pin $3.7468-0273 Bushing $2.8768-0323 Chassis Pin $3.74

68-0324 Lift Lever Pivot Pin $2.8768-0325 Lift Lever $22.7068-0327 Main Slide $126.5768-0337 Lift lever LHRB $108.8068-0338 Lift lever RHRB $108.8068-0367 Knob Hub Cover $16.2868-0368 Locking slide spring LHRB $16.94

* 68-0405 Cover (8700) $162.38* 68-0406 Cover (12-8888 & 8888) $162.38* 68-0407 Cover (8900) $162.38* 68-0408 Cover LHRB 8616/66 $162.38* 68-0409 Cover RHRB 8616/66 $162.38* 68-0410 Cover LHRB 8916/66 $162.38* 68-0411 Cover RHRB 8916/66 $162.38

68-0419 Guide spring $5.7568-0434 Endcap for 6600-6900 Series $16.2868-0456 latchbolt (12-9800) $56.1768-0477 Lift lever LHRB $6.4368-0478 Lift lever RHRB $6.4368-0479 Lift lever pivot pin $0.8368-0482 Latchbolt (8500) $55.2268-0484 Endcap for 6300-6500 exits $16.2868-0489 Lift lever LHRB 1-3/4" door (8300) $112.0168-0490 Lift lever RHRB 1-3/4" door (8300) $112.0168-0491 Lift lever LHRB 2-3/4” door (8300) $126.5768-0492 Lift lever RHRB 2-3/4" door (8300) $126.57

* 68-0495 Cover (8500) $215.95* 68-0496 Cover (8300/8400) $215.95

68-0511 Mounting Plate $22.2768-0536 Lift lever LHRB (8400) $66.1568-0537 Lift lever RHRB (8400) $66.15

* 68-0549 Mounting rail insert “F” – Wide $60.13* 68-0550 Mounting rail insert “E” – Wide $60.13* 68-0551 Mounting rail insert “G” – Wide $60.13* 68-0552 Mounting rail insert “J” – Wide $60.13* 68-0553 Mtg. Rail Insert J-Narrow $60.13

68-0559 700-1 Lever $8.8968-0561 Lexan end cap for 80 series $16.28

* 68-0574 Shim for 8893/8895 $11.9068-0582 Lock down cam $7.92

* 68-0615 Push rail “E” $185.78* 68-0616 Push rail “J” $204.35* 68-0617 Push rail “G” $222.93* 68-0618 Push Rail “F” $204.35* 68-0632 Mounting rail insert, inactive “F” $139.33* 68-0633 Mounting rail insert, inactive “G” $139.33

68-0644 Hooked tool $2.8768-0645 700- Adaptor (8888) $19.5368-0663 Shrink Tube $0.9868-0729 80 Series Rail Plug $1.09

* 68-0737 PS Rail (Cam) 12-8J $154.3268-0772 Cylinder Lockdown Filler $5.88

* 68-0775 Mtg. Rail E-narrow $222.93* 68-0777 Mtg. Rail G-narrow $222.93* 68-0778 Mtg. Rail F-narrow $222.93* 68-0780 Mtg. Rail E-wide $222.93* 68-0782 Mtg. Rail G-wide $222.93



ED-60EXIT DEVICES

PARTS



* 68-1369 Mtg. Rail F-wide/narrow (55-56) $306.53* 68-1373 Mtg. Rail Insert F-narrow $60.40* 68-1375 Mtg. Rail Insert E/F-Narrow $60.13* 68-1410 Mtg. Rail L (55-56) $306.53* 68-1411 Mtg. Rail M (55-56) $306.53* 68-1412 Mtg. Rail N (55-56) $306.53* 68-1414 Mtg. Rail - L $222.92* 68-1415 Mtg. Rail - M $222.92* 68-1416 Mtg. Rail - N $222.92* 68-1444 Push Rail E (8895) $204.35* 68-1445 Push Rail F/J (8895) $213.65* 68-1446 Push Rail G (8895) $241.50

68-1455 Top Rod Adjuster $4.10* 68-1466 Mtg. Rail J-narrow $222.92* 68-1467 Mtg. Rail J-wide $222.92* 68-1468 Mtg. Rail - 8895J $260.08* 68-1469 Mtg. Rail - 8895F $260.08* 68-1477 Mtg. Rail Insert J/G (8895) $60.13* 68-1479 Mtg. Rail Insert -L $60.13* 68-1480 Mtg. Rail Insert - M $60.13* 68-1481 Mtg. Rail Insert - N $60.13

68-2100 8804/8810/8888 Chas. Assy. LHRB/RHRB – Old $519.6668-2106 8828 Chassis Assy. less cover LHRB $703.7668-2107 8828 Chassis Assy. less cover RHRB $703.7668-2109 8863 Chassis Assy. less cover LHRB $732.3268-2110 8863 Chassis Assy. less cover RHRB $732.32

* 68-2113 Screw Pk $13.5568-2116 Chassis Asy HC 8800 $280.8668-2117 Chassis Asy 12-HC 8800 $345.27

* 68-2143 Screw Pk A $31.5668-2163 8710 Chassis Assy. less cover LHRB $604.1268-2164 8710 Chassis Assy. less cover RHRB $604.1268-2172 8900 All functions less cover LHRB $388.0268-2173 8900 All functions less cover RHRB $388.0268-2198 Locking slide LHRB (8700) $12.5768-2199 Locking slide RHRB (8700) $12.5768-2201 8706/8713 Chassis Assy. less cov. LHRB $815.1468-2202 8706/8713 Chassis Assy. less cov. RHRB $815.1468-2204 8762/8763 Chassis Assy. less cov. LHRB $826.5068-2205 8762/8763 Chassis Assy. less cov. RHRB $826.5068-2207 8715 Chassis Assy. less cover LHRB $763.2068-2208 8715 Chassis Assy. less cover RHRB $763.2068-2210 8728 Chassis Assy. less cover LHRB $751.7368-2211 8728 Chassis Assy. less cover RHRB $751.7368-2213 8916/8966 Chassis Assy.less cov. LHRB $493.5468-2214 8916/8966 Chassis Assy. less cov. RHRB $493.5468-2216 8866 Chassis Assy. LHRB (Less Cover) $745.3168-2217 8866 Chassis Assy. RHRB (Less Cover) $745.31

* 68-2262 12-8710 Chassis Pack LHRB $960.86* 68-2263 12-8710 Chassis Pack RHRB $960.86* 68-2268 8710 Chassis Pack LHRB $763.20* 68-2269 8710 Chassis Pack RHRB $763.20* 68-2274 Standard screw pack 12-8700 $22.70* 68-2291 12-8900 Pack all functions LHRB $644.71* 68-2292 12-8900 Pack all functions RHRB $644.71* 68-2298 8900 all functions - LHRB Chassis Pack $646.62* 68-2299 8900 all functions - RHRB Chassis Pack $646.62

* 68-0783 Mtg. Rail F-wide $222.9368-0811 Stop Pin $2.0068-0814 Bushing $0.40

* 68-0826 Mtg. Rail G-wide/narrow (55-56) $306.53* 68-0828 Mtg. Rail J-wide/narrow (55-56) $306.53* 68-0836 Mtg. Rail Insert F-wide $60.13* 68-0838 Mtg. Rail Insert G-wide $60.13* 68-0839 Mtg. Rail Insert J-wide/G-narrow $60.13* 68-0840 Mtg. Rail Insert J-narrow $60.13

68-0852 700-4 Cam $21.46* 68-0866 Mtg. Rail - 8895E $260.08* 68-0868 Mtg. Rail - 8895G $260.08

68-0917 Auxiliary Control Plate $3.4368-0918 Extension Rod $17.8968-0945 Pivot pin (new style) $7.53

* 68-0948 Mounting Rail J-Wide $194.91* 68-0949 Mounting Rail G-Wide $194.91* 68-0950 Mounting Rail E-Wide $194.91* 68-0952 Mounting Rail F-Wide $194.91* 68-0955 Mounting Rail F-Narrow $194.91* 68-0956 Mounting Rail J-Narrow $194.91* 68-0957 Mounting Rail G-Narrow $194.91* 68-0958 Mounting Rail E-Narrow $194.91* 68-1020 59-8800 Cover - Narrow $215.95* 68-1028 Push Rail 59-80J $213.65* 68-1029 Push Rail 59-80G $232.21* 68-1030 Push Rail 59-80F $204.35* 68-1042 Mtg. Rail F-narrow $222.92* 68-1043 Mtg. Rail J-narrow $222.92* 68-1044 Mtg. Rail G-narrow $222.92* 68-1058 Mtg. Rail F-wide $222.92* 68-1059 Mtg. Rail J-wide $222.92* 68-1060 Mtg. Rail G-wide $222.92

68-1137 Lift Lever $66.1568-1155 Latch Retr. LVR $6.7768-1183 Inactive OS Front $64.9368-1191 Link Pin $6.4368-1201 Plug $2.4568-1210 Hairpin $0.8368-1212 Top Rod SP/PP/PR8700 – Old Style $81.1968-1245 Adjustment Tube $3.2868-1254 Extension Bracket (700-6) $8.0668-1255 Cover Plate – PP/PR/SP8600 $7.2468-1256 Adjustment Tube Pin $4.7968-1270 Ext. Connector $20.5068-1273 Top Rod SP/PP/PR8600 90" Dr. $31.5668-1274 Top Rod SP/PP/PR18600 96" Dr. $31.56

* 68-1317 Pull Lever Cover – LP/LR/LS8600 $120.29* 68-1319 Mtg. Rail - L $260.08* 68-1320 Mtg. Rail - M $260.08* 68-1321 Mtg. Rail - N $260.08* 68-1324 Mtg. Rail Insert - L $60.13* 68-1325 Mtg. Rail Insert - M $60.13* 68-1326 Mtg. Rail Insert - N $60.13

68-1363 Center Spring $5.0468-1366 Latchbolt Lift Lever $1.9068-1367 Latchbolt Lift Lever $1.90



ED-61EXIT DEVICES

PARTS



* 68-2305 8828 Chassis Pack LHRB $816.24* 68-2306 8828 Chassis Pack RHRB $816.24* 68-2307 8863 Chassis Pack LHRB $844.80* 68-2308 8863 Chassis Pack RHRB $844.80* 68-2313 8816 Chassis Pack LHRB $1,057.34* 68-2314 8816 Chassis Pack RHRB $1,057.34* 68-2315 8866 Chassis Assy. LHRB $1,057.34* 68-2316 8866 Chassis Assy. RHRB $1,057.34

68-2326 12-8863 Chassis Assy. less cover LHRB $882.4068-2327 12-8863 Chassis Assy. less cover RHRB $882.4068-2329 12-8828 Chassis Assy. less cover LHRB $853.8268-2330 12-8828 Chassis Assy. less cover RHRB $853.82

* 68-2333 12-8828 Chassis Pack LHRB $1,003.91* 68-2334 12-8828 Chassis Pack RHRB $1,003.91* 68-2335 12-8863 Chassis Pack LHRB $1,003.91* 68-2336 12-8863 Chassis Pack. RHRB $1,003.91* 68-2341 12-8816 Chassis Pack LHRB $1,209.74* 68-2342 12-8816 Chassis Pack RHRB $1,209.74* 68-2343 12-8866 Chassis Pack LHRB $1,125.14* 68-2344 12-8866 Chassis Pack RHRB $1,125.14

68-2352 8816 Chassis Assy. less cover LHRB $937.7568-2353 8816 Chassis Assy. less cover RHRB $937.7568-2409 12-8815 Chassis Assy. less cover LHRB – Old $743.6568-2410 12-8815 Chassis Assy. less cover RHRB – Old $743.6568-2421 8504 Chassis Assy. less cover LHRB $703.7668-2422 8504 Chassis Assy. less cover RHRB $703.7668-2425 12-8816 Chassis Assy. less cover LHRB $1,096.5668-2426 12-8816 Chassis Assy. less cover RHRB $1,096.56

* 68-2428 8600 all functions Chassis Pack LHRB $798.89* 68-2429 8600 all functions Chassis Pack RHRB $798.89* 68-2431 12-8600 all functions Chassis Pack LHRB $948.27* 68-2432 12-8600 all functions Chassis Pack RHRB $948.27

68-2443 12-8866 Chassis Assy. less cover LHRB $969.4668-2444 12-8866 Chassis Assy. less cover RHRB $969.46

* 68-2446 8706/8713 Chassis Pack LHRB $1,022.89* 68-2447 8706/8713 Chassis Pack RHRB $1,022.89* 68-2448 8715 Chassis Pack LHRB $925.60* 68-2449 8715 Chassis Pack RHRB $925.60* 68-2450 8728 Chassis Pack LHRB $921.63* 68-2451 8728 Chassis Pack RHRB $921.63* 68-2452 8762/8763 Chassis Pack LHRB $996.65* 68-2453 8762/8763 Chassis Pack RHRB $996.65* 68-2454 12-8706/12-8713 Chassis Pack LHRB $1,120.36* 68-2455 12-8706/12-8713 Chassis Pack RHRB $1,120.36* 68-2456 12-8715 Chassis Pack LHRB $1,118.16* 68-2457 12-8715 Chassis Pack RHRB $1,118.16* 68-2458 12-8728 Chassis Pack LHRB $1,071.69* 68-2459 12-8728 Chassis Pack RHRB $1,071.69* 68-2460 12-8762/12-8763 Chassis Pack LHRB $1,146.74* 68-2461 12-8762/12-8763 Chassis Pack RHRB $1,146.74* 68-2463 8916/8966 Chassis Pack LHRB $675.19* 68-2464 8916/8966 Chassis Pack RHRB $675.19* 68-2466 12-8916/12-8966 Chassis Pack LHRB $703.07* 68-2467 12-8916/12-8966 Chassis Pack RHRB $703.07* 68-2478 8504 Chassis Pack RHRB $1,013.19* 68-2479 8504 Chassis Pack LHRB $1,013.19

68-2481 8300 Chassis Assy. less cover LHRB $534.14

68-2482 8300 Chassis Assy. less cover RHRB $534.14* 68-2486 8300 all functions Chassis Pack LHRB $717.69* 68-2487 8300 all functions Chassis Pack RHRB $717.69

68-2508 8510 Chassis Assy. less cover $632.26* 68-2516 8510 Chassis Pack $844.40* 68-2524 12-8300 Chassis Pack LHRB $787.54* 68-2525 12-8300 Chassis Pack RHRB $787.54

68-2559 8400 Chassis Assy. less cover LHRB $478.6568-2560 8400 Chassis Assy. less cover RHRB $478.65

* 68-2565 8400 Chassis Assy. LHRB $660.97* 68-2566 8400 Chassis Assy. RHRB $660.97* 68-2568 12-8400 Chassis Assy. LHRB $928.86* 68-2569 12-8400 Chassis Assy. RHRB $928.86

68-2571 Slide and plate Assy. $132.1768-2594 8600 Chassis Assy. less cover LHRB – Old $369.7568-2595 8600 Chassis Assy. less cover RHRB – Old $369.7568-2596 Dogging kit $19.5368-2597 Bridge rectifier pack $19.53

* 68-2694 Rail Assy. wide cam lockdown “E” (24" - 32") $738.75* 68-2695 Rail Assy. wide cam lockdown “F” (33" - 36") $738.75* 68-2696 Rail Assy. wide cam lockdown “G” (43" - 48") $738.75* 68-2697 Rail Assy. Wide cam lockdown "J"(37" - 42") $738.75* 68-2698 16-Ral Assy. wide “E” (28" - 32") $844.40* 68-2699 16- Rail Assy. wide “F” (33" - 36") $844.40* 68-2700 16- Rail Assy. wide “G” (43" - 48") $844.40* 68-2701 16- Rail Assy. Wide "J" (37" - 42") $844.40* 68-2702 12-Rail Assy. wide “E” (24" - 32") $738.75* 68-2703 12- Rail Assy. “F” (33" - 36") $738.75* 68-2704 12- Rail Assy. “G” (43" - 48") $738.75* 68-2705 12- Rail Assy. "J" (37" - 42") $738.75* 68-2706 Dummy Rail Assy. “E” $360.55* 68-2707 Dummy Rail Assy. “F” $360.55* 68-2708 Dummy Rail Assy. “G” $360.55* 68-2716 Rail Assy. narrow cam lockdown “E” $738.75* 68-2717 Rail Assy. narrow cam lockdown “F” $738.75* 68-2718 Rail Assy. narrow cam lockdown “G” $738.75* 68-2719 Rail Assy. Narrow cam lockdown "J" $738.75* 68-2720 16-Rail Assy. narrow “E” (26" - 32") $844.40* 68-2721 16- Rail Assy. narrow “F” (33" - 36") $844.40* 68-2722 16- Rail Assy. narrow “G” (43" - 48") $844.40* 68-2723 16- Rail Assy "J" Narrow (37" - 42") $844.40* 68-2724 12-Rail Assy. narrow “E” (24" - 32") $738.75* 68-2725 12- Rail Assy. “F” narrow (33" - 36") $738.75* 68-2726 12- Rail Assy. “G” narrow (43" - 48") $738.75* 68-2727 12- Rail Assy. "J" narrow (37" - 42") $738.75* 68-2757 Mtg. Rail Insert - E-55-8895 $60.13* 68-2761 Mtg. Rail Insert -F-wide $87.47* 68-2763 Mtg. Rail Insert - G-wide $87.47* 68-2764 Mtg. Rail Insert - J-wide/G-narrow $87.47* 68-2789 55-86/87/88/89 Rail Assy. E- Wide $1,022.89* 68-2790 55-86/87/88/89 Rail Assy. F- Wide $1,022.89* 68-2791 55-86/87/88/89 Rail Assy. G- Wide $1,022.89* 68-2792 55-86/87/88/89 Rail Assy J-wide $1,022.89* 68-2793 16-55-86/87/88/89 Rail Assy. E-wide $1,120.75* 68-2794 16-55-86/87/88/89 Rail Assy. F- Wide $1,120.75* 68-2795 16-55-86/87/88/89 Rail Assy. G- Wide $1,120.75* 68-2797 12-55-86/87/88/89 Rail Assy. E- Wide $1,006.77



ED-62EXIT DEVICES

PARTS



* 68-2796 16-55-86/87/88/89 Rail Assy. J-wide $1,120.75* 68-2798 12-55-86/87/88/89 Rail Assy. F- Wide $1,006.77* 68-2799 12-55-86/87/88/89 Rail Assy. G- Wide $1,006.77* 68-2800 12-55-86/87/88/89 Rail Assy. J-Wide $1,006.77* 68-2801 55-83/84/85 Rail Assy. E- Narrow $1,022.89* 68-2802 55-83/84/85 Rail Assy. F- Narrow $1,022.89* 68-2803 55-83/84/85 Rail Assy. G- Narrow $1,022.89* 68-2804 55- 83/84-85 Rail Assy. J- Narrow $1,022.89* 68-2805 16-55 Rail Assy. E- Narrow $1,120.36* 68-2806 16-55 Rail Assy. F- Narrow $1,120.36* 68-2807 16-55 Rail Assy. G- Narrow $1,120.36* 68-2808 16-55 Rail Assy. J- Narrow $1,120.36* 68-2809 12-55 Rail Assy. E- Narrow $1,006.77* 68-2810 12-55 Rail Assy. F- Narrow $1,006.77* 68-2811 12-55 Rail Assy. G- Narrow $1,006.77* 68-2812 12-55 Rail Assy J- Narrow $1,006.77* 68-2815 Cam 57-86/87/88/89 Rail Assy. F- Wide (36") $1,396.43* 68-2817 Cam 57-86/87/88/89 Rail Assy. G- Wide $1,396.43* 68-2818 Cam 57-86/87/88/89 Rail Assy. J- Wide $1,396.43* 68-2823 12-57-86/87/88/89 Rail Assy. F- Wide (36") $1,380.17* 68-2825 12-57-86/87/88/89 Rail Assy. G- Wide $1,380.17* 68-2826 12-57-86/87/88/89 Rail Assy. J- Wide $1,380.17* 68-2827 57-83/84/85 Rail Assy. E- Narrow (32") $1,396.43* 68-2828 57-84/85 Rail Assy. F- Narrow $1,396.43* 68-2829 57-83/84/85 Rail Assy. G- Narrow $1,396.43* 68-2830 57-83/84/85 Rail Assy. J- Narrow $1,396.43* 68-2835 12-57 83/84/85 Rail Assy E Narrow $1,380.17* 68-2836 12-57 83/84/85 Rail Assy F Narrow $1,380.17* 68-2837 12-57-83/84/85 Rail Assy. G- Narrow $1,380.17* 68-2838 12-57-83/84/85 Rail Assy. J- Narrow $1,380.17* 68-2846 Mtg. Rail Insert - J-narrow $87.47* 68-2905 19-Rail Assy. “E” Narrow (24" - 32") $719.74* 68-2906 19- Rail Assy. “F” Narrow (33" - 36") $719.74* 68-2907 19- Rail Assy. “G” Narrow (43" - 48") $719.74* 68-2908 19- Rail Assy. "J" Narrow (37" - 42") $719.74* 68-2909 16-19- Rail Assy. “E” Narrow (26" - 32") $828.13* 68-2910 16-19- Rail Assy. “F” Narrow (33" - 36") $828.13* 68-2911 16-19- Rail Assy. “G” Narrow (43" - 48") $828.13* 68-2912 16-19- Rail Assy. "J" Narrow (37" - 42") $828.13* 68-2913 12-19- Rail Assy. “E” Narrow (24" - 32") $719.20* 68-2914 12-19- Rail Assy. “F” Narrow (33" - 36") $719.20* 68-2915 12-19- Rail Assy. “G” Narrow (43" - 48") $719.20* 68-2916 12-19- Rail Assy. "J" Narrow (37" - 42") $719.20* 68-2918 19- Rail Assy. “E” Wide (24" - 32") $719.20* 68-2919 19- Rail Assy. “F” Wide (33" - 36") $719.20* 68-2920 19- Rail Assy. “G” Wide (43" - 48") $719.20* 68-2921 19- Rail assy. "J" Wide (37" - 42") $719.20* 68-2922 16-19- Rail Assy. “E” Wide (28" - 32") $828.13* 68-2923 16-19- Rail Assy. “F” Wide (33" - 36") $828.13* 68-2924 16-19- Rail Assy. “G” Wide (43" - 48") $828.13* 68-2925 16-19- Rail Assy. "J" Wide (37" - 42") $828.13* 68-2926 12-19- Rail Assy. “E” Wide (24" - 32") $720.92* 68-2927 12-19- Rail Assy. “F” Wide (33" - 36") $720.92* 68-2928 12-19- Rail Assy.“G” Wide (43" - 48") $720.92* 68-2929 12-19- Rail Assy. "J" Wide (37" - 42") $720.92* 68-2977 19-57 Rail Assy E Narrow $1,396.43* 68-2978 19-57 Rail Assy F Narrow $1,396.43

* 68-2979 19-57 Rail Assy G Narrow $1,396.43*68-2980 19-57 Rail Assy J Narrow $1,396.43

* 68-3001 Mfg. Rail Insert F- Wide (16-) $87.47* 68-3002 Mtg. Rail Insert - E-wide (16-) $87.47* 68-3003 Mtg. Rail Insert - G-wide (16-) $87.47* 68-3004 Mtg. Rail Insert - G-narrow (16-) $87.47

68-3020 16- Lockdown Cam. Assy. $29.65* 68-3023 Screw Pack for 12-8700 $80.64* 68-3036 58-86/87/88/89 Rail Assy. E $1,120.36* 68-3037 58-86/87/88/89 Rail Assy. F $1,120.36* 68-3038 58-86/87/88/89 Rail Assy. G $1,120.36* 68-3039 58-86/87/88/89 Rail Assy J $1,120.36* 68-3040 16-58-86/87/88/89 Rail Assy E-Wide $1,217.80* 68-3041 16-58-86/87/88/89 Rail Assy. F- Wide $1,217.80* 68-3042 16-58-86/87/88/89 Rail Assy. G- Wide $1,217.80* 68-3043 16-58-86/87/88/89 Rail Assy J-Wide $1,217.80* 68-3044 12-58-86/87/88/89 Rail Assy. E- Wide $1,104.07* 68-3045 12-58-86/87/88/89 Rail Assy. F- Wide $1,104.07* 68-3046 12-58-86/87/88/89 Rail Assy. G- Wide $1,104.07* 68-3047 12-58-86/87/88/89 Rail Assy J-Wide $1,104.07* 68-3048 58-83/84/85 Rail Assy. E- Narrow $1,120.36* 68-3049 58-83/84/85 Rail Assy. F- Narrow $1,120.36* 68-3050 58-83/84/85 Rail Assy. G- Narrow $1,120.36* 68-3051 58- 83/84/85 Rail Assy J- Narrow $1,120.36* 68-3052 16-58 83-84-85 Rail Assy E- Narrow $1,217.80* 68-3053 16-58-83/84/85 Rail Assy. F- Narrow $1,217.80* 68-3054 16-58-83/84/85 Rail Assy. G- Narrow $1,217.80* 68-3055 16-58 83-84-85 Rail Assy J- Narrow $1,217.80* 68-3056 12-58-83/84/85 Rail Assy. E- Narrow $1,104.07* 68-3057 12-58-83/84/85 Rail Assy. F- Narrow $1,104.07* 68-3058 12-58-83/84/85 Rail Assy. G- Narrow $1,104.07* 68-3059 12-58-83/84/85 Rail Assy. J- Narrow $1,104.07* 68-3061 55-58 Rail Assy E-Wide $1,642.78* 68-3062 55-58 Rail Assy F-Wide $1,642.78* 68-3063 55-58 Rail Assy G-Wide $1,642.78* 68-3064 55-58 Rail Assy J-Wide $1,642.78* 68-3065 16-55-58 Rail Assy E-Wide $1,695.87* 68-3066 16-55-58 Rail Assy F-Wide $1,695.87* 68-3067 16-55-58 Rail Assy G-Wide $1,695.87* 68-3068 16-55-58 Rail Assy J-Wide $1,695.87* 68-3069 12-55-58 Rail Assy E-Wide $1,642.78* 68-3070 12-55-58 Rail Assy F-Wide $1,642.78* 68-3071 12-55-58 Rail Assy G-Wide $1,642.78* 68-3072 12-55-58 Rail Assy J-Wide $1,642.78* 68-3073 55-58 Rail Assy E-narrow $1,642.78* 68-3074 55-58 Rail Assy F-narrow $1,642.78* 68-3075 55-58 Rail Assy G-narrow $1,642.78* 68-3076 55-58 Rail Assy J-narrow $1,642.78* 68-3077 16-55-58 Rail Assy E-narrow $1,695.87* 68-3078 16-55-58 Rail Assy F-narrow $1,695.87* 68-3079 16-55-58 Rail Assy G-narrow $1,695.87* 68-3080 16-55-58 Rail Assy J-narrow $1,695.87* 68-3081 12-55-58 Rail Assy E-narrow $1,642.78* 68-3082 12-55-58 Rail Assy F-narrow $1,642.78* 68-3083 12-55-58 Rail Assy G-narrow $1,642.78* 68-3084 12-55-58 Rail Assy J-narrow $1,642.78* 68-3098 E Narrow Rail Assy $1,120.36





* 68-3099 F Narrow Rail Assy $1,120.36* 68-3100 J Narrow Rail Assy $1,120.36* 68-3101 G Narrow Rail Assy $1,120.36* 68-3211 12-56-86/87/88/89 Rail Assy. G- Wide $1,542.55* 68-3212 12-56-86/87/88/89 Rail Assy. F- Wide $1,542.55* 68-3213 12-56-86/87/88/89 Rail Assy. J- Wide $1,542.55* 68-3216 12-56-83/84/85 Rail Assy. G- Narrow $1,542.55* 68-3217 12-56-83/84/85 Rail Assy. F- Narrow $1,542.55* 68-3218 12-56-83/84/85 Rail Assy. J- Narrow $1,542.55* 68-3224 19-56- 8G Wide Rail $1,542.55* 68-3225 19-56- 8F Wide Rail $1,542.55* 68-3226 19-56- 8J Wide Rail $1,542.55* 68-3229 19-56-8G Narrow Rail $1,542.55* 68-3230 19-56-8F Narrow Rail $1,542.55* 68-3231 19-56-8J Narrow Rail $1,542.55

68-3245 Top Case Assy. $146.39* 68-3277 Active Dummy Rail "E" $357.29* 68-3278 Active Dummy Rail "F" $357.29* 68-3279 Active Dummy Rail “G” $357.29* 68-3281 55-Active Dummy Rail E $570.61* 68-3282 55-Active Dummy Rail F $570.61* 68-3283 55-Active Dummy Rail G $570.61

68-3292 Connect Arm asy (55-56-80) $34.16* 68-3298 55-56-86/87/88/89 Rail Assy. G- Wide $1,704.90* 68-3299 55-56-86/87/88/89 Rail Assy. F- Wide $1,704.90* 68-3300 55-56-86/87/88/89 Rail Assy. J- Wide $1,704.90* 68-3303 55-56-83/84/85 Rail Assy. G- Narrow $1,704.90* 68-3304 55-56-83/84/85 Rail Assy. F- Narrow $1,704.90* 68-3305 55-56-83/84/85 Rail Assy. J- Narrow $1,704.90* 68-3309 19-55-56-80 Rail -G Wide $1,704.90* 68-3310 19-55-56-80 Rail -F Wide $1,704.90* 68-3311 19-55-56-80 Rail -J Wide $1,704.90* 68-3314 19-55-56-80 Rail -G Narrow $1,704.90* 68-3315 19-55-56-80 Rail -F Narrow $1,704.90* 68-3316 19-55-56-80 Rail -J Narrow $1,704.90

68-3515 Chassis Asy - (WD12-8600) $444.4668-3522 WD CVR Top Case/Bracket assy 1 3/4" door $230.1668-3523 WD CVR Top Case/Bracket assy

1 3/4" Door 1/4" cladding $230.1668-3524 WD CVR Top Case/Bracket assy

1 3/4" door 1/2" cladding $230.1668-3563 Top & Bottom Case Pk. $276.9968-3580 Inner chassis assy. 700-4 ET and Control $188.5268-3627 Inner case assy. ET & 100 Aux Control $264.6168-3714 Chassis Assy. 12-59-8706 LHR $835.9368-3715 Chassis Assy. 12-59-8706 RHR $835.93

* 68-3751 59-8804 CC Pk L $1,193.47* 68-3780 59-86/87/88/89 Rail Asy. F-Wide $2,094.59* 68-3781 59-86/87/88/89 Rail Asy. J-Wide $2,094.59* 68-3782 59-86/87/88/89 Rail Asy. G-Wide $2,094.59* 68-3784 12-59-86/87/88/89 Rail Asy. F-Wide $2,078.33* 68-3785 12-59-86/87/88/89 Rail Asy. J-Wide $2,078.33* 68-3786 12-59-86/87/88/89 Rail Asy. G-Wide $2,078.33* 68-3788 Cam 59-83/84/85 F-Narrow $2,094.59* 68-3789 Cam 59-83/84/85 J-Narrow $2,094.59* 68-3790 Cam 59-83/84/85 G-Narrow $2,094.59* 68-3792 12-59-83/84/85 Rail Assy. F-Narrow $2,078.33

* 68-3793 12-59-83/84/85 Rail Assy. J-Narrow $2,078.33* 68-3794 12-59-83/84/85 Rail Assy. G-Narrow $2,078.33

68-3813 Chassis Asy - MD12-8600 $154.60* 68-3815 MD- 8600 Chas Pack $470.87

68-3823 12-59 & 59-8710 Chas Asy L $910.9768-3824 12-59 & 59-8710 Chas Asy R $910.9768-3826 12-59 & 59-8762/63 Chas Asy L $1,133.3368-3827 12-59 & 59-8762/63 Chas Asy R $1,133.3368-3829 12-59 & 59-8728 Chas Asy L $1,058.7168-3830 12-59 & 59-8728 Chas Asy R $1,058.7168-3854 MD-59-8600 Inner Case $259.81

* 68-3876 Mfg. Rail Insert G- Wide $87.47* 68-3877 Mtg. Rail Insert - G-narrow $87.47* 68-3878 Mtg. Rail Insert - J-narrow $87.47* 68-3900 59-8504/44 CC Pk L $1,193.48* 68-3901 59-8504/44 CC Pk R $1,193.48* 68-3903 59-8506,13,15,73 & 74 CC L $1,193.48* 68-3904 59-8506,13,15,73 & 74 CC R $1,193.48* 68-3905 Screw Pak $4.91

68-3906 Screw Pk B $28.5868-3917 12-HC-8804 Chas Asy. – Old Style $876.7968-3918 HC-8804 Chas Asy. – Old Style $730.6868-3922 Screw Pak (12-8800) $11.6668-3932 12-8700 Chassis Assy. RHR $163.5968-3933 PP/PR/SP Top case $186.9768-3934 Active Mortise Case – PP/SP8700 $429.7168-3935 Inactive Mortise Case – PR8700 $341.02

* 68-3953 PP/PR/SP8700 T/C Pack $375.87* 68-3954 PP/PR/SP8700 T/C Pack $375.87* 68-3968 Mtg. Rail Insert - G-narrow $87.47* 68-3969 Mtg. Rail Insert - J-narrow $87.47* 68-4010 AL- “8F” Wide Rail Asy. $1,185.28* 68-4011 AL- “8J” Wide Rail Asy. $1,185.28* 68-4012 AL- “8G” Wide Rail Asy. $1,185.28* 68-4018 AL-12- “8F” Wide Rail Asy. $1,185.28* 68-4019 AL-12- “8J” Wide Rail Asy. $1,185.28* 68-4020 AL-12- “8G” Wide Rail Asy. $1,185.28* 68-4022 AL- “8F” Nar Rail Asy. $1,185.28* 68-4023 AL- “8J” Nar Rail Asy. $1,185.28* 68-4024 AL- “8G” Nar Rail Asy. $1,185.28* 68-4025 AL- 8E Nar Rail. Asy. $1,185.28* 68-4030 AL-12- “8F” Nar Rail Asy. $1,185.28* 68-4031 AL-12- “8J” Nar Rail Asy. $1,185.28* 68-4032 AL-12- “8G” Nar Rail Asy. $1,185.28* 68-4033 AL-12 8E Nar Rail Assy $1,185.28* 68-4035 AL-19- “8F” Wide Rail Asy. $1,165.74* 68-4036 AL-19- “8J” Wide Rail Asy. $1,165.74* 68-4037 AL-19- “8G” Wide Rail Asy. $1,165.74* 68-4043 AL-12-19- “8F” Wide Rail Asy. $1,167.42* 68-4044 AL-12-19- “8J” Wide Rail Asy. $1,167.42* 68-4045 AL-12-19- “8G” Wide Rail Asy. $1,167.42* 68-4047 AL-19- “8F” Nar Rail Asy. $1,165.74* 68-4048 AL-19- “8J” Nar Rail Asy. $1,165.74* 68-4049 AL-19- “8G” Nar Rail Asy. $1,165.74* 68-4050 AL-19- "8E" Nar Rail Asy. 32" only $1,165.74* 68-4055 AL-12-19- “8F” Nar Rail Asy. $1,165.74* 68-4056 AL-12-19- “8J” Nar Rail Asy. $1,165.74

ED-63EXIT DEVICES

PARTS



ED-64EXIT DEVICES

PARTS




* 68-4057 AL-12-19- “8G” Nar Rail Asy. $1,165.7468-4075 Chassis Asy AL-8816 LH $791.2568-4076 Chassis Asy AL-8816 RH $791.2568-4077 Chassis Asy AL-12-8816 LH $596.1168-4078 Chassis Asy AL-12-8816 RH $596.1168-4080 Chassis Asy AL-8828 LH $436.0168-4081 Chassis Asy AL-8828 RH $436.0168-4082 Chassis Asy AL-12-8828 LH $616.4268-4083 Chassis Asy AL-12-8828 RH $616.42

* 68-4088 Chassis Asy w/cover - 59-8500 LH $966.24* 68-4089 Chassis Asy w/cover - 59-8500 RH $966.24

68-4180 Active Mort. Case PP/SP8600 $592.6468-4181 Inactive Mort. Case PR8600 $430.2668-4182 Chassis Assy PP/PR/SP $150.3468-4209 Extension Rod Assembly 108" $52.8168-4210 Extension Rod Assembly 114" $54.1268-4211 Extension Rod Assembly 120" $56.6968-4212 Extension Rod Assembly Special $60.5668-4235 16 Function Lever Asy RHR 80 Ser. $146.1068-4236 16 Function Lever Asy LHR 80 Ser. $146.10

* 68-4242 L Low Profile Rail (36") (Cam) $811.87* 68-4243 M Low Profile Rail (42" or 44") $811.87* 68-4244 N Low Profile Rail (46" or 48") $811.87* 68-4246 L 16- Low Profile Rail (36") $917.38* 68-4247 M 16- Low Profile Rail (42" or 44") $917.38* 68-4248 N 16- Low Profile Rail (46" or 48") $917.38* 68-4250 L 12- Low Profile Rail (36") $811.87* 68-4251 M 12- Low Profile Rail (42" or 44") $811.87* 68-4252 N 12- Low Profile Rail (46" or 48") $811.87* 68-4255 Mtg. Rail Insert - L $87.47* 68-4256 Mtg. Rail Insert - M $87.47* 68-4257 Mtg. Rail Insert - N $87.47

68-4261 Chassis Asy 8800 $518.7068-4264 Chassis Asy LP/LR/LS + 12-8600 $368.6268-4270 Upper Link asy LH $46.4868-4271 Upper Link asy RH $46.48

* 68-4305 55-Low Profile Rail Asy - L - (36") $1,024.42* 68-4306 55-Low Profile Rail Asy - M - (42" or 44") $1,024.42* 68-4307 55-Low Profile Rail Asy - N - (46" or 48") $1,024.42* 68-4309 12-55-Low Profile Rail Asy - L - (36") $1,024.42* 68-4310 12-55-Low Profile Rail Asy - M - (42" or 44") $1,024.42* 68-4311 12-55-Low Profile Rail Asy - N - (46" or 48") $1,024.42* 68-4322 55-56-Low Profile Rail Asy - L - (36") $1,661.36* 68-4323 55-56-Low Profile Rail Asy - M - (42" or 44") $1,661.36* 68-4324 55-56-Low Profile Rail Asy - N - (46" or 48") $1,661.36* 68-4331 56-Low Profile Rail Asy - L - (36") $1,447.71* 68-4332 56-Low Profile Rail Asy - M - (42" or 44") $1,447.71* 68-4333 56-Low Profile Rail Asy - N - (46" or 48") $1,447.71* 68-4335 19-56 “L” RL Low Profile $1,447.71* 68-4336 19-56 “M” RL Low Profile $1,447.71* 68-4337 19-56 “N” RL Low Profile $1,447.71* 68-4340 58-Low Profile Rail Asy - L - (36") $1,115.98* 68-4341 58-Low Profile Rail Asy - M - (42" or 44") $1,115.98* 68-4342 58-Low Profile Rail Asy - N - (46" or 48") $1,115.98* 68-4344 12-58-Low Profile Rail Asy - L - (36") $1,115.98* 68-4345 12-58-Low Profile Rail Asy - M - (42" or 44") $1,115.98* 68-4346 12-58-Low Profile Rail Asy - N - (46" or 48") $1,115.98

* 68-4357 55-58-Low Profile Rail Asy - L - (36") $1,328.29* 68-4358 55-58-Low Profile Rail Asy - M - (42" or 44") $1,328.29* 68-4359 55-58-Low Profile Rail Asy - N - (46" or 48") $1,328.29* 68-4361 12-55-58-Low Profile Rail Asy - L - (36") $1,328.29* 68-4362 12-55-58-Low Profile Rail Asy - M - (42" or 44") $1,328.29* 68-4363 12-55-58-Low Profile Rail Asy - N - (46" or 48") $1,328.29* 68-4406 Top & Bottom Pk (12-3700) $505.58* 68-4407 Mtg. Rail Insert -E/F-narrow (16-) $87.47

68-4410 Chassis Asy (AL-/GL-) $231.5268-4411 Chassis Asy (12-AL/12-GL) $375.8768-4413 Latchbolt Asy - standard $19.3268-4415 Latchbolt Asy - Guarded $32.8868-4420 Chassis Asy (59-) $270.6368-4421 Chassis Asy (12-59-) $398.43

* 68-4449 Center Case for 8804,06,10,13,15 $729.83* 68-4552 12-8700 Top/Btm case pk $357.39

68-4556 Bottom Case asy (14-8700) $81.9968-4561 Top Case Asy (HC8700) $164.02

* 68-4570 Mtg. Rail Insert -E/F-narrow $87.47* 68-4571 Mtg. Rail Insert - J-narrow (16-) $87.47* 68-4572 Mtg. Rail Insert - F-narrow $87.47* 68-4574 Mtg. Rail Insert - F-55-8895 $60.40* 68-4575 Mtg. Rail Insert -J/G-55-8895 $60.40* 68-4579 Active Dummy Rail "J" $357.29* 68-4580 55-Active Dummy Rail J $544.84* 68-4591 53- E Wide Rail Asy $936.61* 68-4592 53- F Wide Rail Asy $936.61* 68-4593 53- J Wide Rail Asy $936.61* 68-4594 53- G Wide Rail Asy $936.61* 68-4615 53-55 E Wide Rail Assy. $1,061.58* 68-4616 53-55 F Wide Rail Assy. $1,061.58* 68-4617 53-55 J Wide Rail Assy. $1,061.58* 68-4618 53-55 G Wide Rail Assy. $1,061.58

68-4628 53-55 Narrow Rail Asy $1,125.28* 68-4639 53-58 E Wide Rail Assy. $1,263.01* 68-4640 53-58 F Wide Rail Assy. $1,263.01* 68-4641 53-58 J Wide Rail Assy $1,263.01* 68-4642 53-58 G Wide Rail Assy $1,263.01* 68-4643 16-53-58 E Wide Rail Assy $1,373.41* 68-4644 16-53-58 F Wide Rail Assy $1,373.41* 68-4645 16-53-58 J Wide Rail Assy $1,373.41* 68-4646 16-53-58 G Wide Rail Assy $1,373.41* 68-4647 12-53-58 E Wide Rail Assy $1,263.01* 68-4648 12-53-58 F Wide Rail Assy $1,263.01* 68-4649 12-53-58 J Wide Rail Assy $1,263.01* 68-4650 12-53-58 G Wide Rail Assy $1,263.01* 68-4651 53-58 E Narrow Rail Assy. $1,263.01* 68-4652 53-58 F Narrow Rail Assy. $1,263.01* 68-4653 53-58 J Narrow Rail Assy $1,263.01* 68-4654 53-58 G Narrow Rail Assy $1,263.01* 68-4655 16-53-58 E Narrow Rail Assy $1,373.41* 68-4656 16-53-58 F Narrow Rail Assy $1,373.41* 68-4657 16-53-58 J Narrow Rail Assy $1,373.41* 68-4658 16-53-58 G Narrow Rail Assy $1,373.41* 68-4659 12-53-58 E Narrow Rail Assy $1,263.01* 68-4660 12-53-58 F Narrow Rail Assy $1,263.01* 68-4661 12-53-58 J Narrow Rail Assy $1,263.01


ED-65EXIT DEVICES

PARTS

* 68-4662 12-53-58 G Narrow Rail Assy $1,263.01* 68-4663 53-55-58 E Wide Rail Assy $1,475.32* 68-4664 53-55-58 F Wide Rail Assy $1,475.32* 68-4665 53-55-58 J Wide Rail Assy $1,475.32* 68-4666 53-55-58 G Wide Rail Assy $1,475.32* 68-4667 16-53-55-58 E Wide Rail Assy $1,585.73* 68-4668 16-53-55-58 F Wide Rail Assy $1,585.73* 68-4669 16-53-55-58 J Wide Rail Assy $1,585.73* 68-4670 16-53-55-58 G Wide Rail Assy $1,585.73* 68-4671 12-53-55-58 E Wide Rail Assy $1,475.32* 68-4672 12-53-55-58 F Wide Rail Assy $1,475.32* 68-4673 12-53-55-58 J Wide Rail Assy $1,475.32* 68-4674 12-53-55-58 G Wide Rail Assy $1,475.32* 68-4675 53-55-58 E Narrow Rail Assy $1,475.32* 68-4676 53-55-58 F Narrow Rail Assy $1,475.32* 68-4677 53-55-58 J Narrow Rail Assy $1,475.32* 68-4678 53-55-58 G Narrow Rail Assy $1,475.32* 68-4679 16-53-55-58 E Narrow Rail Assy $1,585.73* 68-4680 16-53-55-58 F Narrow Rail Assy $1,585.73* 68-4681 16-53-55-58 J Narrow Rail Assy $1,585.73* 68-4682 16-53-55-58 G Narrow Rail Assy $1,585.73* 68-4683 12-53-55-58 E Narrow Rail Assy $1,475.32* 68-4684 12-53-55-58 F Narrow Rail Assy $1,475.32* 68-4685 12-53-55-58 J Narrow Rail Assy $1,475.32* 68-4686 12-53-55-58 G Narrow Rail Assy $1,475.32* 68-4687 12-53-56 F Wide Rail Assy $1,688.70* 68-4688 12-53-56 J Wide Rail Assy $1,688.70* 68-4689 12-53-56 G Wide Rail Assy $1,688.70* 68-4690 12-53-56 F Narrow Rail Assy $1,688.70* 68-4691 12-53-56 J Narrow Rail Assy $1,688.70* 68-4692 12-53-56 G Narrow Rail Assy $1,688.70* 68-4693 12-53-55-56 F Wide Rail Assy $1,901.03* 68-4694 12-53-55-56 J Wide Rail Assy $1,901.03* 68-4695 12-53-55-56 G Wide Rail Assy $1,901.03* 68-4696 12-53-55-56 F Narrow Rail Assy $1,901.03* 68-4697 12-53-55-56 J Narrow Rail Assy $1,901.03* 68-4698 12-53-55-56 G Narrow Rail Assy $1,901.03* 68-4743 19-53E Narrow Rail $936.61* 68-4744 19-53F Narrow Rail $936.61* 68-4745 19-53J Narrow Rail $936.61* 68-4746 19-53G Narrow Rail $936.61* 68-4833 Mtg. Rail Insert - F-wide $87.47

68-4838 Connect Arm & Pin asy. $28.6968-4840 Latchbolt Asy - Guarded $25.76

* 68-4938 55-57 Rail Assy - F-wide $1,616.25* 68-4939 55-57 Rail Assy - G-wide $1,616.25* 68-4940 55-57 Rail Assy - J-wide $1,616.25* 68-4942 12-55-57 Rail Assy - F-wide $1,616.25* 68-4943 12-55-57 Rail Assy - G-wide $1,616.25* 68-4944 12-55-57 Rail Assy - J-wide $1,616.25* 68-4945 55-57 Rail Assy - E-narrow $1,616.25* 68-4946 55-57 Rail Assy - F-narrow $1,616.25* 68-4947 55-57 Rail Assy - G-narrow $1,616.25* 68-4948 55-57 Rail Assy - J-narrow $1,616.25* 68-4949 12-55-57 Rail Assy - E-narrow $1,616.25* 68-4950 12-55-57 Rail Assy - F-narrow $1,616.25* 68-4951 12-55-57 Rail Assy - G-narrow $1,616.25

* 68-4952 12-55-57 Rail Assy - J-narrow $1,616.25* 68-4976 55-AL Rail Assy - F-wide $1,403.94* 68-4977 55-AL Rail Assy - J-wide $1,403.94* 68-4978 55-AL Rail Assy - G-wide $1,403.94* 68-4980 12-55-AL Rail Assy - F-wide $1,403.94* 68-4981 12-55-AL Rail Assy - J-wide $1,403.94* 68-4982 12-55-AL Rail Assy - G-wide $1,403.94* 68-4983 55-AL Rail Assy - E-narrow $1,403.94* 68-4984 55-AL Rail Assy - F-narrow $1,403.94* 68-4985 55-AL Rail Assy - J-narrow $1,403.94* 68-4986 55-AL Rail Assy - G-narrow $1,403.94* 68-4987 12-55-AL Rail Assy - F-narrow $1,403.94* 68-4988 12-55-AL Rail Assy - J-narrow $1,403.94* 68-4989 12-55-AL Rail Assy - G-narrow $1,403.94* 68-4990 12-55-AL Rail Assy - E-narrow $1,403.94

68-5068 MD8600 Chassis assy. (LH) $369.7568-5374 CVR Top Case Assy - 1 3/4" door $146.3968-5375 CVR Top Case Assy - 1 3/4" door 1/4" cladding $146.3968-5376 CVR Top Case Assy - 1 3/4" door 1/2" cladding $146.3968-5424 Screw Pack - HC8700 $7.0968-5426 Chassis Asy - LH - 8400 $478.6668-5427 Chassis Asy - RH - 8400 $478.6668-5441 Top Case Asy - NBWD8600 $167.4968-5496 Chassis Assy 8800 V.N1 $298.1468-5562 RL/TCH Bar Assy W 16-56-8E $1,592.2468-5563 RL/TCH Bar Assy W 16-56-8F $1,592.2468-5564 RL/TCH Bar Assy W 16-56-8J $1,592.2468-5565 RL/TCH Bar Assy W 16-56-8G $1,592.24

* 68-5587 Rail Assy N HK-56-8F $1,476.4068-7057 Top Case Pack (WD8600) $211.5968-7058 Top Case Pack - 8400/MD8600 $224.2968-7059 Bottom Rod & Bolt Assy. Cvr $64.43

* 68-7064 N1 8E RI Assy $1,022.89* 68-7065 N1 8F RI Assy $1,022.89* 68-7066 N1 8G RI Assy $1,022.89* 68-7067 N1 8J RI Assy $1,022.89* 68-7072 N1-12 8E RI Assy $1,006.77* 68-7073 N1-12 8F RI Assy $1,006.77* 68-7074 N1-12 8G RI Assy $1,006.77* 68-7075 N1-12 8J RI Assy $1,006.77* 76-0027 Knob collar $9.88

76-0563 Spiral pin $0.33* 77-0080 Inside neck $14.88

77-0086 Inside knob shank $26.85* 77-0182 Rose (“O” design) $32.91

77-0189 Rose bushing insert $1.31* 77-0550 Rose bushing $17.96* 77-0883 ASA Strike Crvd Lip 1-1/4" $25.46

77-2682 Mounting plate & bushing Assy. $25.2177-3915 Half spindle unit 8300 & 8900 1-3/4"-2-1/4" doors $24.2377-3916 Half spindle unit 8300 & 8900 2-1/4" - 3" doors $24.2377-3917 Half spindle unit 8300 & 8900 over 3" doors $36.3694-0018 Inner chassis spring $11.8794-0029 Bottom Case Assembly $92.6794-0038 Bottom bolt $51.0494-0039 Bolt sleeve $66.2294-0051 Lever locking plate $3.04






ED-66EXIT DEVICES

PARTS



94-0054 Lever spring $15.91* 94-0056 Cylinder blocking ring (41 & 71 size) $8.48* 94-0058 Cylinder blocking ring (42 & 72 size) $10.82

94-0088 Cylinder hub $15.91* 94-0092 Cover mounting screw $0.74

94-0106 Pin $1.1594-0109 Spring $10.3394-0110 Cam $6.9494-0112 Locking lever (306) $17.0794-0113 Locking lever $17.0794-0114 Locking lever (113, 313) $17.07

* 94-0119 Cover $60.4294-0188 Lifting Lever $10.18

* 94-0189 Cylinder Operation Escutcheon $121.26* 94-0190 Crossbar $252.23* 94-2376 Center Case, Active RHRB $424.42* 94-2377 Center Case, Active LHRB $424.42* 94-2378 Fire Rated Center Case, Active RHRB $848.85* 94-2379 Fire Rated Center Case, Active LHRB $848.85* 94-2384 Tenon Packet $46.08

94-2385 Top Latch Assembly $224.3494-2386 Bottom Bolt Assembly (26D only) $242.5394-2387 Screw Pack (mounting screws) $16.6194-2390 Top Strike Pack $36.4194-2391 Bottom Strike Pack $26.6894-2008 Inner case assembly (8400 x control x no trim) $195.6394-2016 Bottom Case & Bolt Asy 8400 $233.9694-2087 Lever assembly (106, 113) $28.3494-2088 Lever assembly (313) $28.3494-2089 Chassis assembly $207.93*94-2121 Turn lever assembly $88.7794-2249 Locking lever & pin assy. (106) $26.4694-2329 Lever Assembly 206-306 $26.4696-0061 Inner chassis bracket $23.1496-0064 Top case plate $31.4296-0069 Bottom bolt $39.7296-0074 Plate $31.4296-0107 Top Rod/Bottom Cvr (Specify Size) $33.4596-2030 Top plate assembly (Old 8600) $72.8096-2031 Top case assembly (Old 8600) $137.3896-2035 Top slide assembly $111.8996-2085 Bottom Bolt Asy $49.6197-0001 Dogging key $2.7497-0006 Locking slide spring (specify hand) $16.94

* 97-0007 Crossbar for 90 series $172.91* 97-0008 End plug for 90 series $10.66

97-0012 Main arm spring $1.78* 97-0015 12-90 Bracket Cover $134.90* 97-0018 Cover Top & Bottom for 8700 $92.64* 97-0020 Guide $28.58* 97-0028 Arm $92.65

97-0029 Bracket pivot pin $5.8897-0030 Pivot pin $5.8897-0031 Main arm spacer $1.7897-0032 Main slide $81.19

* 97-0034 Top or bottom rod (90 & 20 Series) $81.1997-0035 Retractor $8.4897-0036 Sliding bolt $42.23

97-0037 Knob slide $42.2397-0039 Bottom sliding bolt $48.6697-0040 Bushing $4.5197-0042 Knob hub $33.6397-0043 Knob hub retainer $5.8897-0045 Bushing pin $1.7897-0046 Retaining pin $1.7897-0048 Rod adj. pin $0.9697-0049 Rod adj. pin (13-9700) $0.9697-0050 Spring $1.5097-0051 Spring $1.50

* 97-0052 Screw $0.4897-0053 Latchbolt $44.70

* 97-0058 Grip $201.74* 97-0060 Grommet nut $5.88* 97-0064 Grip $201.74

97-0065 Pivot pin $2.2697-0075 Lift lever $6.9797-0076 Sliding bolt $78.6097-0079 Filler cap $67.53

* 97-0084 Cover 12-8700 top case (old/before 1/92) $96.49* 97-0086 Cover 12-9700 (center cover) $168.81* 97-0087 Cover (12-bottom cover) $96.49

97-0089 Thumb piece lever $50.0297-0090 Thumb piece slide $50.0297-0101 Retractor spring $5.88

* 97-0114 Plate (818) $201.7497-0119 Thru bolt stud $8.48

* 97-0122 Plate (838) $201.7497-0131 Thumb piece backup plate $6.9797-0156 Oval head rivet $0.48

* 97-0182 Thumb piece (LH) $83.93* 97-0189 Thumb piece (RH) $83.93* 97-0203 Thumb piece (LH) $89.92* 97-0214 Thumb piece (RH) $89.92

97-0270 Top reinforcement $14.08* 97-0285 Inside lever 306/313 control (8700) $182.67* 97-0286 Plate (828) $201.74* 97-0291 Plate (842) $112.49

97-0294 Pivot pin $2.8797-0296 Latchbolt $44.7097-0298 Top slide $9.7797-0300 Spring $11.21

* 97-0302 Cylinder ring 7-pin $16.8297-0305 Insert $0.96

* 97-0309 Plate (874DT) $112.49* 97-0311 Plate (894) $112.49* 97-0312 Plate (884) $112.49* 97-0313 Plate (874) $112.49

97-0328 Solenoid cover $56.1797-0329 Locking tail $44.7097-0347 Locking slide spring $4.24

* 97-0349 16-Cylinder Collar 41 Cylinder $7.92* 97-0350 Collar 41 & 71 (706, 713)

(Arrow, Best, Falcon 16-) $8.48* 97-0351 Collar 42 & 72 (706, 713) $11.21* 97-0352 Collar 43 (706, 715) $16.82

97-0356 Locking Slide $34.16



ED-67EXIT DEVICES

PARTS



97-0360 Spring Link $1.6697-0362 Hub Spring $0.99

* 97-0367 Grip $196.54* 97-0392 Top cover After (1/92) for 12-8700 $92.65

97-0409 ET Adaptor 700-5 $30.3597-0425 Spring $7.5397-0454 Bottom Bolt Spring $1.9097-0475 FW743 Locking Slide $40.5997-0477 FW-ET Bushing Insert $6.0297-0508 Lower Hub Plate FW700(-5,-8) $3.3297-0551 2-1/4" lockable spindle $22.56

* 97-0562 2 Plate (PSB) $119.0297-0566 “J” lever spring $7.5397-0568 Wrench – Cyl. Nut $11.2897-0573 Spindle (04 & 10 function) $5.0397-0579 Spring (Torsion) $1.2997-2001 Locking slide Assy. 9700 $16.8297-2002 12-Bot. case Assy. less cover (Old Style) $336.2297-2003 12-Top case Assy. less cover (Old Style) $402.6697-2038 Bot. case Assy. less cover (Before 11/11/02) $240.2897-2039 14-Bottom case Assy. less cover (Before 11/11/02) $104.30

* 97-2040 9710 Ctr Case Asy $453.98* 97-2042 9706/13 Ctr Case Asy $515.33

97-2046 Top slide/roll pin Assy. $98.1397-2048 Cylinder hub Assy. $22.41

* 97-2049 Cross Bar Pack (90 Series) $255.73* 97-2237 Ctr Sub Case - 12-9710 $576.68* 97-2240 Ctr Sub Case - 12-9706 & 13 $638.03* 97-2302 Ctr Sub Case - 12-9762 & 63 $674.84* 97-2369 9710 C.C. Pack $613.49* 97-2371 9706/13 C.C. Pack $674.84* 97-2378 Inside lever Assy. (9700) $182.67* 97-2381 9715 Center case assy $453.98* 97-2384 9728 Center case assy $490.79* 97-2402 9715 Center case pack $613.49* 97-2404 9728 Center case pack $650.29* 97-2406 Ctr Sub Case - 12-9715 $576.68* 97-2407 Ctr Sub Case - 12-9728 $613.49

97-2434 Top case Assy. less cover (Before 11/11/02) $286.61* 97-264 6 Screw pack $11.21

97-2854 Chassis Asy - (12-)9715 $337.72* 97-286 8 Top & Bottom Case Pack (Before 11/11/02) $706.63* 97-2952 Screw Pak 800 Series $10.52* 97-2953 Screw Pak 800 Series $7.49

97-2963 12-Top case Assy. (Before 11/11/02) $322.29* 97-2972 Ctr Case Pk - 12-9710 $736.18* 97-2973 Ctr Case PK - 12-9715 $736.18* 97-2974 Ctr Case Pk - 12-9728 $772.99* 97-2975 Ctr Case Pk - 12-9706 & 13 $797.53* 97-2976 Ctr Case Pk - 12-9762 & 63 $834.34

97-3066 Switch & Cable Assy. $60.1397-3098 FW Spindle Asy 1-3/4" $33.0897-3137 Switch/Mtg. Plate Assy. $166.8898-0009 Latchbolt lever LHRB $14.0898-0010 Latchbolt lever RHRB $14.0898-0011 Lever pivot pin $4.2498-0018 Outside cylinder hub $16.28

98-0020 Cylinder support $21.80* 98-0021 Cylinder blocking ring $16.82

98-0027 Spring $1.5098-0028 Latchbolt spring $1.7898-0036 Shim for 646/649 $18.58

* 98-0049 Plate (818) $107.1498-0071 Thru bolt stud $13.5598-0111 Main arm spring $1.5098-0115 Compression Spring $1.50

* 98-0117 Bracket cover 9700 & 9898 $134.90* 98-0118 Plate PTB-98K $107.14* 98-0119 Plate PTB-98T $107.14

98-0123 Latchbolt $52.0698-0124 Thumb piece lever $18.31

* 98-0125 Plate (98E) $107.14* 98-0126 Plate (98D) $107.14

98-0155 Main arm spring $1.90* 98-0209 Cover 9898 $93.76

98-0248 Guide Pin $10.6198-0275 Collar-L980 $11.0298-0276 Collar-12-L980 $11.0298-0277 Collar-EL980 $11.02

* 98-2011 Bracket Pack 12- (includes cover $305.2098-2034 L.B. & Pin Assy LHRB 20, 60, 90 $37.6098-2035 L.B. & Pin Assy RHRB 20, 60, 90 $37.60

* 98-2156 Arm 9800 $91.4698-2159 Bolt spring & bracket Assy. $21.60

* 98-2161 9898 CTR Case Pk. $537.48* 98-2162 Bracket Pack (includes cover) $305.20* 98-2163 9898 Ctr Case Assy. (less cover) $375.45* 98-2469 12-9804 LHRB Chassis asy $915.74* 98-2470 12-9804 RHRB Chassis asy $915.74* 98-2492 Center Case Pk LHRB $787.54* 98-2493 Center Case Pk RHRB $787.54* 98-2503 Chassis Assy. 9804 $389.67* 98-2504 Chassis Asy 9800 $389.67

98-2518 L980 & L980A Assembly $300.7098-2520 12-L980 Latch Assy (Retrofits L980S) $300.7098-2521 EL980 Latch Assy $314.3698-2597 12-HCL980 Latch Assy (Retrofits HC-L980) $314.36

* 99-0007 Cylinder ring 16 & 66 $34.6999-0009 Mortise lock lever RHRB $34.6999-0010 Mortise lock lever LHRB $34.6999-0011 Pivot pin $2.92

* 99-0012 12-9900 Cover $172.0999-0057 Guardbolt spring $1.5399-0058 Slide guide $2.9299-0060 Guardbolt lever $2.9299-0061 Thumb piece lever spring $1.5399-0063 Guardbolt lever spring $1.5399-0072 Guardbolt eyelet $1.3999-0075 Anti-Friction bolt $28.6999-0076 Slide space $2.9299-0077 Guardbolt tail piece $1.5399-0078 Cylinder set screw $1.5399-0088 Thumb piece lever $18.6899-0098 Anti-Friction bolt pivot pin $2.92


ED-68EXIT DEVICES

PARTS



Part No. Price99-0206 Knob hub $34.6999-0208 Locking lever $8.6499-0212 Pin $0.98

* 99-0216 Front RHRB 963, 928 $109.24* 99-0217 Front LHRB 963, 928 $109.24* 99-0218 Front LHR flat 963, 928 $109.24* 99-0219 Front RHR flat 963, 928 $109.24

99-0223 Slide guide $5.5799-0224 Thumb Piece Lever $26.88

* 99-0226 Front LHRB for 916, 966 $109.24* 99-0227 Front RHRB for 916, 966 $109.24* 99-0228 Front LHR flat for 916, 966 $109.24* 99-0229 Front RHR flat for 916, 966 $109.24

99-0236 Cylinder clamp $5.8799-0249 Roll pin for 916, 966 $0.7299-2035 Guardbolt Assy. LHRB $62.8499-2036 Guardbolt Assy. RHRB $62.8499-2050 Slide, bushing Assy. $45.5599-2052 Guardbolt Assy. $22.9999-2059 Lever slide Assy. $11.4399-2247 Latchbolt Assy. $114.6799-2334 Solenoid (Pull) for 971 M.L. $487.5299-2335 Solenoid (Push) for 970 M.L. $487.5299-2389 Latchbolt lever Assy. $45.55

ED-69EXIT DEVICES


Minimum Order $250

Blank Page

ED-70EXIT DEVICES

P888 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available with 10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V10 Prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices (not available with 16- prefix) Add $127.00 16 Cylinder lockdown feature (Not available with AL, 12, 57 prefixes) Add $94.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $37.0037 Spanner head screws Add $25.00*53 Latchbolt Monitor Switch (not available with 57-) Add $183.00 *54 Internal micro switch in ET control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Electric Latch Retraction (not available with AL, 57, 58 prefixes) Add $772.00 *57 Delayed Action (Magnet ordered separate), (not available with AL, 16, 53, 55, 56, 58 prefixes) Add $1,158.00 *58 Electric Dogging (not available with 56 or 57 prefixes) Add $374.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 70 Small Format Interchangeable Disposable plastic core No addition 72 Small Format Interchangeable Cores 6-Pin Construction Core provided (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin Interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin Uncombinated Core (refer to page CK-11 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Knurled Outside Lever Add $56.00 F182 SARGENT Keso Security, patented, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patented, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16, 55, 56, 57 prefixes) (minimum Dr width 36") Add $437.00 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.GL Guarded Latch Add $26.00 SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section


ED-71EXIT DEVICES

P888 REVERSIBLE RIM EXIT DEVICE



Less Trim Finish

EB, ED, EN 4, 10,

Device EP, EAB 10BL, 26D 3, 9, 20D, 26

P888 $530.00 $870.00 $924.00

P888 Series Trim 3, 4, 9, 10, 10BL,

Function Trim 20D, 26, 26DP8C Key Locks/Unlocks Trim LBB, LBL, LBP $280.00 P8K Key Retracts Latchbolt LBB, LBL, LBP $280.00 P8L Trim Always Operable LBB, LBL, LBP $280.00 P8D Dummy Trim LBB, LBL, LBP $280.00 704 Key Retracts Latchbolt (P804, P888) ETBB, ETBJ, ETBP, ETBL $338.00 706-8 Key operates ET (P806, P888)) ETBB, ETBJ, ETBP, ETBL $338.00 710 Dummy Trim (P810, P888) ETBB, ETBJ, ETBP, ETBL $338.00 713-8 Key Locks/Unlocks Lever Control(P813, P888) ETBB, ETBJ, ETBP, ETBL $338.00 715-8 Trim Always Operable (P815, P888) ETBB, ETBJ, ETBP, ETBL $338.00

P888 Series Freewheeling Trim 3, 4, 9, 10, 10BL,

Function Trim 20D, 26, 26D740 Dummy Trim (Lever Rotates)(P840, P888) ETBB, ETBJ, ETBP, ETBL $338.00 743-8 Key Engages/Disengages Lever (P843, P888) ETBB, ETBJ, ETBP, ETBL $338.00 744 Key Retracts Latchbolt (Lever Rotates (P844, P888) ETBB, ETBJ, ETBP, ETBL $338.00 746-8 Key operates ET (P846, P888) ETBB, ETBJ, ETBP, ETB $338.00

P888 Series Pull Trim 3, 4, 9, 10, 10BL,

Function 20D, 26, 26D869FSL 04 $253.00 874FLLDT 10 $253.00 879FSW 04 $253.00 813FLWDT 10 $253.00 859PSB 04 $253.00 812PTBDT 10 $253.00 876STS 04 $253.00 876STSDT 10 $253.00

P888 Reversible Rim Device

P888

ED-72EXIT DEVICES

P800 SERIES PREFIXES



PrefixNumber Description Price10 SARGENT Signature System Add $34.00 / cyl.10UL SARGENT Signature Cylinder meeting UL437 (Mortise & Rim Cylinders only) Add $48.00 / cyl.11 SARGENT XC Key System (not available with 10, 10UL, 22, 60, 63, 64, KESO, SC, SE, V10 Prefixes) No addition 1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition 11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Devices (not available with 16- prefix) Add $127.00 16 Cylinder lockdown feature (Not available with AL, 12, 57 prefixes) Add $94.00 21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.22 SARGENT Construction Key System (split key) Add $10.00 /cyl.31 For doors up to 2-1/4" No addition


36 6 Lobe security head screws Add $37.0037 Spanner head screws Add $25.00*53 Latchbolt Monitor Switch (not available with 57-) Add $183.00 *54 Internal micro switch in ET control Add $183.00 *55 Signal Switch in Rail Add $183.00 *56 Electric Latch Retraction (not available with AL, 57, 58 prefixes) Add $772.00 *57 Delayed Action (Magnet ordered separate), (not available with AL, 16, 53, 55, 56, 58) prefixes) Add $1,158.00 *58 Electric Dogging (not available with 56 or 57 prefixes) Add $374.00 60 SARGENT Removable Disposable Construction Core No addition 63 SARGENT Removable Core Cylinder includes master and grandmaster keying charge Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 70 Small Format Interchangeable Disposable plastic core No addition 72 Small Format Interchangeable Cores 6-Pin Construction Core provided (7-pin with 11 prefix) See CK-2 73 Small Format 6-pin interchangeable core (refer to CK-8 for available keyways) Add $40.00 / cyl.737P Small Format 7-pin Uncombinated Core (refer to page CK-11 for available keyways) Add $40.00 / cyl.75 Warning Inside-Abrasive Strip on rail Add $71.00 76 Warning outside-Knurled Outside Lever Add $56.00 77 Warning inside and outside-Abrasive Strip on rail, Abrasive Coating on Lever Add $127.00 F182 SARGENT Keso Security, patented, cylinder – new key systems Add $47.00 / cyl.F183 SARGENT Keso Security, patented, removable core cylinder – new key systems Add $67.00 / cyl.81 Cylinder to accept Keso (83) and Keso F1 (F183) removable core – no core provided No addition 82 SARGENT Keso Security Cylinder (existing key systems only) Add $47.00 / cyl.83 SARGENT Keso Security Removable Core Cylinder (existing key systems only) Add $67.00 / cyl.84 SARGENT Keso Security Removable Construction Core Cylinder See CK-17 AL Alarmed (not available with 16, 55, 56, 57 prefixes) (minimum Dr width 36") Add $437.00 BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70,72, 73, 737P, KESO, SC, SE, V-10 prefixes Add $18.00 /cyl.GL Guarded Latch Add $26.00 SC Schlage C Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition SE Schlage E Keyway Cylinder 0-Bitted (Rim and #41 Mortise Cylinder Only) No addition VA, VC, VS, VCVS — SARGENT V-10 Cylinders See V-10 Cylinder Section

NOTEP888 Device and Trims, see pg. ED-71.


ED-73EXIT DEVICES

P800 SERIES EXIT DEVICE



ET ControlLever BB, BP, BJ, BL

PTBSTS-FLW-FLL-

PSB-FSL-FSW (04 function only)

P800 Series-Rim Device

P800 Series Finish

EB, ED, 4, 10, EB, ED, 4, 10,EN, EP, 10BL, 3, 9, EN, EP, 10BL, 3, 9,

Function EAB 26D 20D, 26 EAB 26D 20D, 26

P810 Exit Only - No Trim $530.00 $870.00 $924.00

P810 Dummy Trim (Lever rigid) $868.00 $1,208.00 $1,262.00 $783.00 $1,123.00 $1,177.00

P804 Key retr. latchbolt (lever rigid) $868.00 $1,208.00 $1,262.00 $783.00 $1,123.00 $1,177.00

P806 Key operates ET $868.00 $1,208.00 $1,262.00

P813 Key locks/unlocks control $868.00 $1,208.00 $1,262.00

P815 Trim always operable $868.00 $1,208.00 $1,262.00

P800 Series With Freewheeling Trim

P840 Dummy Trim (Lever rotates) $868.00 $1,208.00 $1,262.00

P843 Key engages/disengages lever $868.00 $1,208.00 $1,262.00

P844 Key retr. ltchblt. (Lever rotates) $868.00 $1,208.00 $1,262.00

P846 Key operates ET $868.00 $1,208.00 $1,262.00

Electro-Mechanical

P875 Fail Safe 12v or 24v $1,064.00 $1,404.00 $1,458.00

P876 Fail Secure 12v or 24v $1,064.00 $1,404.00 $1,458.00

NOTES:When ordering EB, ED, EN, EP or EAB finishes please specify trim finish. Available trim finishes are: 3, 4, 10, 10BL, 20D, 26 or 26D.To order trim separately refer to page ED-71..

AUXILIARY LOCKS

TABLE OF CONTENTS



AUXILIARY LOCKS

460-470 Series Auxiliary Lock ..................................................AL-1

480 Series Deadbolt .................................................................AL-2

4870 Series Mortise Deadlock .................................................AL-3

460-480-4870 Strikes & Parts ..................................................AL-4

4870 Parts ................................................................................AL-5

Hospital Latch & Parts/Locker & Utility Locks

Hosp. Latch, Locker & Utility Locks ..........................................AL-6

Hospital Push Pull Parts ...........................................................AL-7

Padlock-758 ......................................................................................AL-8

Padlock-858 ......................................................................................AL-9

AL-1AUXILIARY LOCKS

460/470 AUXILIARY LOCKS



460 Series Bored Deadlock Finish

No. Description 32D

464 Double Cylinder $100.00 465 Single Cylinder $76.00

460 SeriesPrefix Description Price10 SARGENT Signature Key System (refer to CK-20 for add’l Masterkeying charges) Add $34.00 / cyl11 SARGENT XC Key System (Not available w/10, 22 prefixes – refer to CK-13) No Add20 2-3/8" Backset — 2-1/4" X 1" wide front No addition

*21 SARGENT Construction Key System (lost ball) Standard on all new systems est. 5/1/96 Add $10.00 / cyl*22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 / cyl36 6-Lobe security Head Screw Add $19.0037 Spanner Head Screw Add $12.00BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.

460

470 Series Bored Deadbolt Finish

Number Description 26D 3, 4, 10,10B, 26

474 Double Cylinder $100.00 $106.00

475 Single Cylinder by thumbturn inside $76.00 $80.00

479 No cylinder, thumbturn inside $51.00 $55.00

470 Series

Prefix Description Price1 1-3/8" to 1-3/4" thick door adapter No addition 10 SARGENT Signature Key System (refer to CK-20 for add’l Masterkeying charges) Add $34.00 /cyl.11 SARGENT XC Key System (Not available w/10, SC, SE, prefixes – refer to CK-13) No Add13 Front and strike with 1/4" radius corners No addition 15 Drive-in adjustable backset bolt x 26D only No addition

*21 SARGENT Construction Key System (lost ball) Add $10.00 /cyl.28 408 Flat lip strike 4-7/8" x 1-1/4" ANSI A115.2 No addition BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage “C” keyway cylindrical (0-Bitted) No AddSE Schlage “E” keyway cylindrical (0-Bitted) No Add

* Refer to CK-3 for additional masterkeying charges when using this prefix.

470

470 Parts Description 3, 4, 10, 10B, 26, 26D

16-0321 Plastic filler to allow standard bolt to fit a standard 161 door prep (No finish needed) $1.55

16-0322 Spacer Ring (for 1- prefix) $9.22

16-0331 Spacer Ring (1-3/8" Door – 1- prefix) $9.22

16-2495 Standard adjustable backset bolt (2-3/8" or 2-3/4" backsets) $33.81

16-2496 1/4" radius corner adjustable backset bolt (2-3/8" or 2-3/4" backsets) $33.81

16-2497 Adjustable backset drive-in bolt (2-3/8" or 2 3/4" backsets) $33.81 470 Strikes Description 26D 3, 4, 10, 10B, 26

406 Standard Strike

407 1/4" Radius Strike $7.10 $8.39

408 Flat Lip Strike 4-7/8"x 1-1/4" - (28-) $10.33 $11.62

Note: Split finishes are not available for 470’s.



AL-2AUXILIARY LOCKS

480 DEADBOLTS

480 Series Bored Deadlock Finish

Number Description 26D 3, 4, 10, 10B, 26484 Double Cylinder $186.00 $190.00 485 Single Cylinder486 Single Cylinder $139.00 $145.00 487 Classroom489 Exit $115.00 $119.00

Note: Split finishes are available for 480’s. Order outside/inside, price as higher price finish.

* Refer to CK-3 for additional masterkeying charges when using this prefix.

480 Series

Prefix Description Price10 SARGENT Signature Key System (refer to CK-20 for add’l Masterkeying charges) Add $34.00 /cyl11 SARGENT XC Key System (Not available w/10, 22, 60, 63, 64, SC, SE, prefixes – refer to CK-13) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-211737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00

16 400 “T” Shaped Strike 2-3/4” x 1-1/8” Add $2.00 20 2-3/8” Backset — 2-3/4" x 1" front No addition

*21 SARGENT Construction Key System (lost ball) Standard on all new systems est. 5/1/96 Add $10.00 /cyl*22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 /cyl28 408 Flat Lip Strike 4-7/8" X 1-1/4" ANSI A115.2 No addition 36 6-Lobe security Head Screw Add $19.00 37 Spanner Head Screw Add $12.00 48 488 Strike 3-5/8" x 1-1/4" Add $1.50 60 SARGENT Removable Disposable Construction Core Cylinder No Add63 SARGENT Removable Core Cylinder (Includes MK and GMK charges) Add $44.00 /cyl64 SARGENT Removable Construction Core Cylinder (Includes MK and GMK charges) See CK-2 6573 Small Format 6 Pin Uncombinated Interchangeable Cores (Refer to CK-8 for available keyways) Add $31.00 /cyl65737P Small Format 7 Pin Uncombinated Interchangeable Cores (Refer to CK-8 for available keyways) Add $31.00 /cyl70 Small Format Interchangeable disposable plastic construction core No Add72 Small Format Interchangeable 6 pin construction core (7-pin with 11 prefix) See page CK-2 73 Small Format 6 pin Interchangeable Core (refer to CK-8 for available keyways)

(Includes MK and GMK charges) Add $40.00 /cyl737P Small Format Interchangeable 7 pin Core (refer to CK-8 for available keyways)

(Includes MK and GMK charges) Add $40.00 /cylBR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage “C” Keyway cylinder 0-Bitted No AddSE Schlage “E” Keyway cylinder 0-Bitted No Add

480



AL-3AUXILIARY LOCKS

4870 MORTISE DEADLOCK

4870 Series

Prefix Description Price** 10 SARGENT Signature Key System Add $34.00 /cyl** 10UL SARGENT Signature Key System meeting UL437 (Mortise and Rim cylinders only) Add $48.00 /cyl

11 SARGENT XC Key System (refer to CK-13 for XC Key System parameters) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00

* 21 SARGENT Construction Key System (lost ball) Standard on all new systems est. 5/1/96 Add $10.00 /cyl* 22 SARGENT Construction Key System (split key) For pre-established split key systems only Add $10.00 /cyl

28 #7710 Strike 4-7/8" x 1-1/4" No addition 36 6-Lobe security Head Screw Add $19.00 37 Spanner Head Screw Add $12.00 60 SARGENT removable disposable construction core No Add63 SARGENT removable core cylinder (Includes MK and GMK keying charges) Add $44.00 /cyl64 SARGENT removable construction core cylinder See CK-2 6573 Small Format Interchangeable 6 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 /cyl65737P Small Format Interchangeable 7 Pin Uncombinated Core (refer to CK-8 for available keyways) Add $31.00 /cyl70 Small Format Interchangeable disposable plastic construction core No Add72 Small Format Interchangeable 6 pin construction core (7-pin with 11 prefix) See Below 73 Small Format Interchangeable 6-pin core (Includes MK and GMK keying charges)

(refer to CK-8 for available keyways) Add $40.00 /cyl737P Small Format Interchangeable 7-pin core (Includes MK and GMK keying charges)

(refer to CK-8 for available keyways) Add $40.00 /cyl74 Lock Case Wrapped in Lead Add $87.00 81 Cylinders to accept KESO & KESO Removable Core – No core provided No AddF182 SARGENT KESO Security Cylinder – Patent Pending Add $47.00 /cyl.F183 SARGENT KESO Security Removable Core Cylinder – Patent Pending Add $67.00 /cyl.82 SARGENT KESO Security Cylinder (for existing systems only) Add $47.00 /cyl83 SARGENT KESO Security Removable Core Cylinder (for existing systems only) Add $67.00 /cyl84 SARGENT KESO Security Removable Construction Core Cylinder (for existing systems only) See CK-17BR SARGENT Bump Resistant Cyls. (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.SC Schlage “C” Keyway cylinder, (#41 mortise cylinder only – 0-bitted) No AddSE Schlage “E” Keyway cylinder, (#41 mortise cylinder only – 0-bitted) No AddSG MicroShield™ – an antimicrobial powder coat finish Add $31.00VA SARGENT V-10 Standard Cylinder See V-10 Cylinder SectionVC SARGENT V-10 Interchangeable Core Cylinder See V-10 Cylinder SectionVS SARGENT V-10 Standard Cylinder Unassembled See V-10 Cylinder SectionVCVS SARGENT V-10 Interchangeable Core Cylinder Unassembled See V-10 Cylinder Section

Note: All 4870 cylinders are shipped with #97 Rosette standard.Split finishes are available. Order outside/inside, price as higher price finish.

* Refer to CK-3 for additional masterkeying charges when using this prefix.** Refer to CK-25 for additional Masterkeying charges when using this prefix. 4870

4870 Mortise Deadlock Finish

Number Description 26D 3, 4, 10, 10B, 10BL, 15, 20D, 26, 32, 32D4874 Double Cylinder $239.00 $244.00 4875 Single Cylinder x Turn Lever4876 Single Cylinder $187.00 $191.004877 Classroom x Turn Lever4878 Public Toilet (Double Cylinder) $239.00 $244.00 4879 Exit $168.00 $173.00

Suffix

CPC Clear Powder Coat over 26D/32D – How to order: 4875 x 32D x CPC Add $21.00 All orders will continue to be handled as a “special” when CPC is required Discounts Do Not Apply



AL-4AUXILIARY LOCKS

STRIKES & PARTS

480/4870 Auxiliary Lock Strikes Finish

Catalog # Description 26D 3, 4, 10, 10B, 26400 “T” Shaped Strike 2-3/4" x 1-1/8" - 480 Series (28-) $7.10 $8.39 404 Standard Strike - 480 Series $7.10 $8.39 408 Flat Lip Strike 4-7/8"x 1-1/4" - 480 Series (28-) $10.33 $11.62 480 Standard Strike - 4870 Series $7.32 $8.64 488 3-5/8" x 1-1/4" - 480 Series (48-) $9.03 $10.33 7710 Flat Lip Strike 4-7/8" x 1-1/4" - 4870 Series $11.28 $12.64 7730 Optional Strike 4-7/8" x 1-1/4" - 4870 Series $15.93 $17.27

480 Deadbolt Assembly Finish

Number Description 3, 4, 10, 10B, 32D*16-2149 2-3/4" Backset $52.12 *16-2153 2-3/8" Backset $52.12 Inside 26D 3, 4, 10, 10B, 26*16-2177 For 484 Function (Cylinder Housing–Specify if 70’s prefixes)) $35.22 $35.22 *16-2039 For 485 & 489 Function (Turn) $30.70 $30.70 *16-2179 For 487 Function (Turn) $21.42 $21.42 16-0301 Mounting Plate 484, 485, 486, 487, 489 (inside and outside) $4.52 $4.52 16-0302 Support Plate 485, 486, 487 & 489 $4.52 $4.52

*16-0306 For 486 Function (Blank Plate) $18.44 $18.44 16-2511 Inside Cylinder Housing (484 with 60, 63, 64 prefix only) $29.94 $29.94

*16-0326 Collar (480 inside & outside – 60, 63, 64 prefix only) $58.19 $58.19 *16-0329 Face Plate $45.93 $45.93 Outside 3, 4, 10, 10B, 26, 26D16-0301 Mounting Plate 484, 485, 486, 487 $4.52

*16-2264 Outside Cylinder Housing & Tailpiece Assy. (484) $50.10 *16-2265 Outside Cylinder Housing & Tailpiece Assy. (485, 486, 487) $50.10 *16-0326 Cylinder Housing Collar $58.19 *16-2193 Screw Pack (48-484) $4.97 *16-2175 Cylinder Housing Only for 484, 485, 486 & 487 $35.22 *16-2460 Blank Rose—489 Function (after 10/98) $30.70 *16-2510 Cylinder Housing Assy. (484 with 60-, 63-, 64- prefix only) $38.32 *16-2512 Cylinder Housing Assy. (485, 487 with 60-, 63-, 64- prefix only) $38.32 *16-2513 Cylinder Housing Assy. (486 with 60-, 63-, 64- prefix only) $38.32 480 Screw Packs 32D*16-2201 Double Cylinder Function 484*16-2202 Single Cylinder Function 485, 486, 487 $6.06 *16-2203 489 Function (with cam bar after 10/98)460 Deadbolt Assembly 3, 10B, 32, 32D*16-2185 2-3/4" Backset $32.26 *16-2184 2-3/8" Backset Parts Description Price01-4446 Cylinder Clamp Screw & Washer $0.40 13-0880 Tailpiece 1-3/8" – 1-3/4" Door (485/487) $1.32 13-0878 Tailpiece 1-3/4" Door (484) $1.32 16-2508 Cam assy.-cyl. prong for 60-, 63-, 64- prefixes $2.86 16-0277 Strike Box $3.10

*Specify Finish. Consult catalog for available finishes.



Parts

Catalog # Description Price

* 97 Cylinder Collar $5.24

* 130W Turn Lever Pack Refer to ML-65

01-0074 Retaining Ring (hub) $0.71


01-0543 Springrip Fastener $1.24

* 01-1028 Outside Front Screw $0.60

01-1142 Case Screw $0.52

* 01-2034 #6 x 3/8" PH HD Wood Screw $0.70

* 01-2035 #6 x 1/2" PH HD Wood Screw $0.70

* 01-3151 #6-32 x 5/16" PH HD M.S. $0.96

* 01-5000 Inside Front Screw $0.68

13-0140 Cylinder Collar Spring $1.48

* 48-0042 Outside Front $27.62

48-0043 Inside Front $16.46

48-0045 Cap $22.05

48-0046 Cylinder Clamp $7.84

48-0047 Cylinder Clamp Screw $1.19

48-0072 Support Post $2.80

48-0084 Deadbolt Spring $1.12

* 48-2056 Screw Pack $9.16

* 77-0137 Plate $23.93

77-0772 Spindle $6.26

77-0826 Spindle $12.04

* 77-2167 Turn Lever Assembly. $24.23

*Specify hardware finish. Consult catalog for available finishes

AL-5AUXILIARY LOCKS

4870 MORTISE DEADBOLT PARTS



AL-6AUXILIARY LOCKS

HOSP. LATCH, LOCKER & UTILITY LOCKS

Utility and Cabinet Locks Finish

Number 26D 3, 4, 10, 10B, 26 32, 32D

4142, 4143 $79.00 $81.00 $85.00

13-0178 Barrel (Plug)- US4 or 15 $21.46

13-0179 Cam-nonhanded $21.39

Locker Locks Finish

Number 26D 3, 4, 261654 Specify door thickness $92.00 $96.00

(1" 5-pin) (1-1/4" or 1-1/2" 5 or 6-pin)

13-0170 Plug Barrel 5-Pin 1" Specify US4 or 15 finish $21.46

13-0172 Plug Barrel 6-Pin 1-1/4" Specify US4 or 15 finish $21.46

13-0174 Plug Barrel 6-Pin 1-1/2" Specify US4 or 15 finish $21.46

16-0010 Bolt/Latch for 1654 $5.17

16-0001 Strike for 1654 $7.61

NOTE: 1654 can be mastered keyed and grand masterkeyed on any 6-pin system.Refer to CK-3 for added masterkeying charges.Systems using 6-pin cylinders are for doors 1-1/8" to 1-1/2" thick only.5-pin available for 1" thick door only.82-1654 (Keso) refer to CK-23.F182-1654 (KESO) refer to CK-18


SG MicroShield™ an antimicrobial powder coat finish Add $21.00

24 2-3/4" Backset No addition

26 7" Backset Add $6.00

28 ANSI Strike #808 No addition

36 6-Lobe Security Head Screws Add $19.00

37 Spanner Head Screws Add $12.00

74 Lead Lining Escutcheon. Indicate inside or outside lining Add $87.00

74 Lead Wrapped Latch Tube Add $109.00

Hospital Latch Finish

Number Description 26D 10, 26 3, 4, 15, 10B

114 5" Backset Specify LH or LHR or RH or RHR $322.00 $333.00 $393.00

115 5" Backset Specify LH or LHR or RH or RHR $322.00 $333.00 $393.00

To order with words “Push” and “Pull”, suffix letter “P” Example: 115P x 10 Add $5.00 to set price

Thru-Bolt Packs-114/115 Price

21-2223 (4/pack) for 1-3/4" door per pack $25.40

21-2224 (4/pack) for 2" door per pack $28.37

21-2225 (4/pack) for 2-1/4" door per pack $31.24

Note: Thru-Bolts are not standard with hospital latches. Please specify x thru-bolts, if required.

Suffix

CPC Clear Powder Coat over 26D – How to order: 115 x 26D x LH x CPC Add $31.00

All orders will continue to be handled as a “special” when CPC is required Discounts Do Not Apply


21 SARGENT Construction Key System (Lost ball) Add $10.00

(Refer to CK-3 for additional masterkeying charges when using this prefix)

AL-7AUXILIARY LOCKS

HOSPITAL PUSH PULL PARTS



Parts114 115 Part # Description PriceX X 01-0697 Spiral Pin $0.71 X X 01-0997 Spiral Pin (After 11/6/92) $0.54 X X 01-1153 Active Adjusting Screw $2.38 X X *21-0156 Cover (plain) $74.99 X X 21-0214 Cam Screw $4.77

X 21-0246 Bumper $2.38 X X 21-0249 Main Pivot $4.77

X *21-0306 Cover (push) $86.43 X X *21-0307 Cover (pull) $86.43 X 21-0460 Spring $5.60 X 21-0461 Cam (push) $23.37 X 21-0462 Cam (pull) $23.37 X 21-0465 Pin (spring) $1.97 X *21-0468 Cover (push) $86.43 X X 21-0510 Chassis (push & pull) $162.86 X *21-0514 Pull Handle $151.65 X *21-0515 Push Handle $151.65

X *21-0516 Pull Handle $162.86 X *21-0517 Push Handle $162.86 X 21-2039 Cam & Spring Assembly $35.01 X *21-2046 LH Pull Handle Assembly. less cover $283.29 X *21-2047 RH Pull Handle Assembly. less cover $283.29

X X 21-2055 Screw Pack $17.06 X *21-2058 LH Push Handle Assembly. less cover $296.15 X *21-2059 RH Push Handle Assembly. less cover $296.15

X X 21-2223 Thrubolt Sleeve 1-3/4" Door $25.40 per pkg.X X 21-2224 Thrubolt Sleeve 2" Door $28.37 per pkg.X X 21-2225 Thrubolt Sleeve 2-1/4" Door $31.24 per pkg.

X *21-2293 Latch Assembly - 5" Backset $175.62 X *21-2294 Latch Assembly - 7" Backset $187.06

X *21-2333 LH Push Handle Assembly. less cover $283.28 X *21-2334 RH Push Handle Assembly. less cover $283.28 X *21-2339 Latch Assembly - 5" Backset $175.62 X *21-2340 Latch Assembly - 7" Backset $187.06 X *21-2343 LH Pull Handle Assembly. less cover $283.29 X *21-2344 RH Pull Handle Assembly. less cover $283.29

X *21-2359 Latch Assembly - 2-3/4" Backset $162.86 X *21-2360 Latch Assembly - 2-3/4" Backset $162.86

21-2381 Fire Shield & Spacer Assembly $19.02 21-2383 Fire Shield Pack $34.10 21-2384 Fire Shield Pack $32.14

*Specify hardware finish. Consult catalog for available finishes.



AL-8AUXILIARY LOCKS

PADLOCK-758

Removable Core Only For No. 63-758 Padlock

Number Price

6300 SARGENT Removable Core $44.00

65-6300 SARGENT Removable Core Unassembled $35.00

KESO/V10 Padlocks Price

KESO F1 (Patented) Padlocks See Cylinder Section Page CK-17

KESO Padlocks See Cylinder Section Page CK-22!

V10 Padlocks See Cylinder Section Page CK-27!

Parts Description Price01-4386 758 Cylinder Retaining Screw $2.28 13-1230 Standard Cylinder Tailpiece $1.34 13-1231 Tailpiece for use with 63 or 60 prefix + Padlock $2.64 13-4064 Cylinder & Tailpiece Assy. $51.00 17-0038 Spring $1.41 17-0067 758 Cylinder Retainer US4 only – SC & SE Keyways $11.80 17-0068 758 Cylinder Retainer – US4 only – Sargent Keyways $11.80 17-0073 1" Shackle Steel $26.05 17-0074 1" Shackle Stainless Steel $26.05 17-0075 2" Shackle Steel $38.29 17-0076 2" Shackle Stainless Steel $38.29 17-0077 4" Shackle Steel $53.64 17-0078 4" Shackle Stainless Steel $53.64 17-0080 Case Brass Only $16.89 17-2006 Chain & Clevis Assembly $18.42

Padlock Shackel Weather Shield Kit

Number Price

6013 $37.00

758 Padlock


10 SARGENT Signature Key System (refer to CK-20 for add’l Masterkeying charges) Add $34.00 /cyl

*11 SARGENT XC Key System (refer to CK-13 for XC Key System parameters) No Add

*21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 /cyl

*22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 /cyl

*51 SARGENT Old Style Removable Core Add $44.00 /cyl

*52 SARGENT Old Style Construction Removable Core See CK-2

60 Padlock to accept 6300 Removable Core — no core provided No Add

63 SARGENT Removable Core Cylinder (includes MK & GMK charges) Add $44.00 /cyl


SC Schlage “C” Keyway Cylinder - O Bitted No Add

SE Schlage “E” Keyway Cylinder - O Bitted No Add

* Refer to CK-3 for additional master keying charges when using this prefixPadlock

Number Price

758 $79.00 Shackle Types and SuffixesHeights: 1"-Standard, 2" (-2 suffix), & 4" (-4 suffix) N/CMaterial: Stainless Steel-Standard, Hardened Steel-Optional specify (-HS suffix) and or chain (-C suffix) options N/C

AL-9AUXILIARY LOCKS

PADLOCK-858



Cylinders & Parts


6300 SARGENT Removable Core $44.00

65-6300 SARGENT Removable Core Unassembled $35.00

13-3871 Standard 6 pin cylinder and tail piece with Signature & construction keying (10, 21 prefixes) $108.00

13-3944 Standard 6 pin cylinder and tail piece assy. But (construction keying) 21 prefix lost ball $74.00

13-4064 Standard 6 pin cylinder and tail piece assy. With tail piece and 2 nickel silver keys $51.00

13-4067 Standard 6 pin cylinder and tail pice with Schlage E keyway (0-bitted) $51.00

13-4068 Standard 6 pin cylinder and tail pice with Schlage C keyway (0-bitted) $51.00

13-5019 Standard 6 pin cylinder and tail piece with Signature Feature (10 prefix) $85.00

01-9219 858 Cylinder retainer screw $3.82

13-1230 Tail piece only for standard cylinder, 10- and 21- cylinders $1.34

17-0085 858 Cylinder retainer $11.80

17-2006 9 inch chain (HS suffix when ordering complete padlock) optional $18.42

17-2581 Padlock body with 1" Brass shackle $34.73



17-2584 Padlock body with 1" Hardened steel shackle $34.73



6013 Padlock Shackel Weather Shield Kit $37.00

858 Padlock


10 SARGENT Signature Key System (refer to CK-20 for add’l Masterkeying charges) Add $34.00 /cyl

*11 SARGENT XC Key System (refer to CK-13 for XC Key System parameters) No Add

*21 SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 Add $10.00 /cyl

*22 SARGENT Construction Key System (split key) To be used on pre-est. split key systems only Add $10.00 /cyl

*51 SARGENT Old Style Removable Core Add $44.00 /cyl

*52 SARGENT Old Style Construction Removable Core See CK-2

60 Padlock to accept 6300 Removable Core — no core provided No Add

63 SARGENT Removable Core Cylinder (includes MK & GMK charges) Add $44.00 /cyl


SC Schlage “C” Keyway Cylinder - O Bitted No Add

SE Schlage “E” Keyway Cylinder - O Bitted No Add

* Refer to CK-3 for additional master keying charges when using this prefixPadlock

Number Price

858 $74.00 Shackle Types and SuffixesHeights: 1"-Standard, 2" (-2 suffix), & 4" (-4 suffix) N/CMaterial: Brass – Standard, Optional Hardened Steel (HS suffix), and 9" chain (-C suffix) N/C

ELECTRICAL

TABLE OF CONTENTS



Electrical

Electro-Mechanical Locksets ....................................................EL-1

Electro-Mechanical Exit Device ................................................EL-2

ElectroLynx Hinges & Retrofit Kits............................................EL-3

Electronic Accessories

Switches/Keypads/Push Buttons ..............................................EL-4

Accessories/Power Supplies.....................................................EL-5

Monitoring Accessories/Key Switches ......................................EL-6

Electromagnetic Locks..............................................................EL-7

Alarms - 540/550/5100/5800

Alarms 540/550 Series .............................................................EL-8

Exit Alarms 5100/5800 Series ..................................................EL-9

Fire Guard Door Closers

Electromechanical 351EHT/EHTD Closer-Holder Release Device ...............................................EL-10

Fire Guard Closers 2408 Series.............................................EL-10

Fire Guard Closers 2900 Series.............................................EL-11

M Power Low Energy Door Operator

4000 Series.............................................................................EL-12

3000 Series.............................................................................EL-13

Parts

01-0997 thru 63-0723 .............................................................EL-14

63-0727 thru 82-3618 .............................................................EL-15

EL-1ELECTRICAL

ELECTRO-MECHANICAL LOCKSETSHOLDERS & STOPS



10 Line Electrical Prefixes

RX Request to exit or enter switch $98.00

Function

Key - in - Lever Bored Series

10G70-12V/10G70-24V Single Cylinder - Fail Safe Price as listed on page BL-23, 25, 27

10G71-12V/10G71-24V Single Cylinder - Fail Secure

Key - in - Knob Bored Series

8G70 Single Cylinder - Fail Safe Price as listed on page BL-51

8G71 Single Cylinder - Fail Secure

8G74 Double Cylinder - Fail Safe Price as listed on page BL-51

8G75 Double Cylinder - Fail Secure

Mortise Electrical Lock Prefix

RX Request to exit or enter switch List Price. . . . . . . . . . . $98.00 Add

DX Deadbolt Monitoring List Price. . . . . . . . . . $160.00 Add

LX Latchbolt Monitor List Price. . . . . . . . . . $160.00 Add

TL SARGuide™ – Illuminated WT Escutcheon List Price. . . . . . . . . . $208.00 Add

Mortise Lever Series – Specify 12v or 24v

8270-12v / 8270-24v Single Cylinder - Fail Safe Price as listed on pages ML-3 thru ML-13, ML-19 thru ML-25, ML-45

8271-12v / 8271-24v Single Cylinder - Fail Secure Price as listed on pages ML-3 thru ML-13, ML-19 thru ML-25, ML-45

8272-12v / 8272-24v Double Cylinder - Fail Safe Price as listed on pages ML-3 thru ML-13, ML-19 thru ML-25, ML-45

8273-12v / 8273-24v Double Cylinder - Fail Secure Price as listed on pages ML-3 thru ML-13, ML-19 thru ML-25, ML-45

9270-12v / 9270-24v Single Cylinder - Fail Safe Price as listed on pages ML-91 thru ML-95, ML-99, ML-103, ML-104

9271-12v / 9271-24v Single Cylinder - Fail Secure Price as listed on pages ML-91 thru ML-95, ML-99, ML-103, ML-104

9272-12v / 9272-24v Double Cylinder - Fail Safe Price as listed on pages ML-91 , ML-93, ML-99, ML-103, ML-104

9273-12v / 9273-24v Double Cylinder - Fail Secure Price as listed on pages ML-91 , ML-93, ML-99, ML-103, ML-104

Electro-Mechanical Locksets are available in all Finishes and Designs as listed on the standard product series price pages

referenced above.

10G70 8G70 8270



EL-2ELECTRICAL

ELECTRO-MECHANICAL EXIT DEVICES

ET Control – L Lever Shown

PTBA-B-E-F-H-J-L-P-W – LeverC-G-R-S-Y – Coastal Levers

Cylinder Included where required

PTB-STS-MAL-FLL-FLW

Series ET Control Lever Designs: Pull Designs80 Series = Pushbar Type Exit Device A, B, E, F, J, L, P, W PTB, FLL, STS,90 Series = Crossbar Type Exit Device Series Type Function C, G, R, S, Y - Coastal Designs FLW, MAL

8370, 8970 Mortise Fail SafeRefer to pages ED-11, ED-37 for pricing.

8371, 8971 Mortise Fail Secure8375, 8975, 9975 Mortise Fail Safe

Refer to pages ED-11, ED-37, ED-45 for pricing.8376, 8976, 9976 Mortise Fail Secure8473, 12-MD8473 Concealed Fail Safe

Refer to pages ED-13, ED-15 for pricing.8474, 12-MD8474 Vertical Rod Fail Secure8573 Rim Fail Safe

Refer to pages ED-17 for pricing.8574 Rim Fail SecureMD8673, WD8673, SP8673, PP8673, ConcealedPR8673, LS8673, LP8673, LR8673 Vertical Rod

Fail Safe Refer to pages ED-19, ED-21, ED-23, ED-25 for pricing.

MD8674, WD8674, SP8674, PP8674, ConcealedPR8674, LS8674, LP8674, LR8674 Vertical Rod

Fail Secure Refer to pages ED-19, ED-21, ED-23, ED-25 for pricing.

8773, NB8773, SP8773, PP8773, PR8773, 9773 Surface Fail SafeRefer to pages ED-27, ED-29, ED33, ED-41 for pricing.

8774, NB8774, SP8774, PP8774, PR8774, 9774 Vertical Rod Fail SecureFM8773 Concealed Fail Safe

Refer to pages ED-31 for pricing.FM8774 Vertical Rod Fail Secure8875, 9875 Rim Fail Safe

Refer to pages ED-35, ED-43 for pricing.8876, 9876 Rim Fail Secure700 Series ET Lever Trim Only Function

773 Control Fail Safe774 Control Fail Secure Refer to ED-46 for pricing - Standard Lever Designs775 Control Fail Safe Refer to ED-48 for pricing - Coastal Series Lever Designs 776 Control Fail Secure Refer to ED-50 for pricing - Metro Elements Lever DesignsNote: 73 and 74 functions are Non-cylinder functions.

773 and 774 ET trims are Non-cylinder trims.ET Trim supplied in 26D finish in lieu of 32D.

Electronic Exit Device - refer to ED-4 thru ED-44 for pricing w/Exit Device and restrictionsPrefix Description Price

53 Latchbolt Monitor Switch Add $183.00 54 Internal Micro Switch for ET Control Add $183.00 55 Signal Switch in Rail Add $183.00 56 Remote Dogging/Latch Retraction Add $772.00 57 Delayed Action - order magnet separate Add $1,158.00 58 Electric Dogging Add $374.00 59 Electroguard (Cylinder provided in rail) Add $1,234.00 BC59 Electroguard Boca Code (Cylinder provided in rail) Add $1,318.00 AL Exit Alarm Add $437.00 AL93 Exit Alarm with Continuous Alarm Add $489.00 TL SARGuide™ - Illuminated Touchpad Add $208.00 PL SARGuide™ PL - Photoluminescent Coating Add $270.00


EL-3ELECTRICAL

HINGES & RETROFIT KITS

ElectroLynx - Hinges & Retrofit Kits

How to Order:

McKinney Hinges: Prefix: Catalog#: Finish: PriceTA314 41⁄2 x41⁄2 26D QC2A TA 314QC2AD 26D $284.00 TA314 41⁄2 x41⁄2 26D QC2 TA 314QC2D 26D $284.00 TA314 41⁄2 x41⁄2 26D QC8 TA 314QC8D 26D $355.00 TA314 41⁄2 x41⁄2 26D QC12 TA 314QC12D 26D $426.00 TA714 41⁄2 x41⁄2 P QC2 TA 714QC2AD P $229.00 TA714 41⁄2 x41⁄2 P QC2A TA 714QC2D P $229.00 TA714 41⁄2 x41⁄2 P QC8 TA 714QC8D P $297.00 TA714 41⁄2 x41⁄2 P QC12 TA 714QC12D P $366.00 TA2314 41⁄2 x41⁄2 26D QC2A TA 2314QC2AD 26D $263.00 TA2314 41⁄2 x41⁄2 26D QC2 TA 2314QC2D 26D $263.00 TA2314 41⁄2 x41⁄2 26D QC8 TA 2314QC8D 26D $331.00 TA2314 41⁄2 x41⁄2 26D QC12 TA 2314QC12D 26D $401.00 TA2714 41⁄2 x41⁄2 P QC2A TA 2714QC2AD P $225.00 TA2714 41⁄2 x41⁄2 P QC2 TA 2714QC2D P $225.00 TA2714 41⁄2 x41⁄2 P QC8 TA 2714QC8D P $289.00 TA2714 41⁄2 x41⁄2 P QC12 TA 2714QC12D P $357.00

Retrofit Kits: How to Order: PriceFor Solenoid Only - 3' - QC2A - 2 Pin Connector w/2 wires 52-2982 $26.04 For Solenoid Only - 15' - QC2A - 2 Pin Connector w/2 wires 52-2983 $31.00 For TL prefix (SARGuide) - 3' - QC2A - 2 Pin Connector with 2 wires 52-2984 $31.00 For Exit Device Rail - 2' - QC8 - 8 Pin Connector w/8 wires 52-2991 $35.95 For Exit Device Rail - 2' - QC12 - 8 & 4 Pin Connector w/12 Wires 52-2992 $48.36 For 59- Circuit Board & Harness Repl. Kit (F size rail) 52-2994 $525.73 For 59- Circuit Board & Harness Repl. Kit (J size rail) 52-2995 $525.73 For 59- Circuit Board & Harness Repl. Kit (G size rail) 52-2996 $525.73 For 57- Circuit Board & Harness Repl. Kit (F size rail) 52-2997 $433.98 For 57- Circuit Board & Harness Repl. Kit (J size rail) 52-2998 $433.98 For 57- Circuit Board & Harness Repl. Kit (G size rail) 52-2999 $433.98 Molex Hand Crimp Tool 52-0439 $481.53 QC8 - 8 Pin Connector w/8 wires - w/Pins (terminals) - 3' 52-2985 $28.51 QC8 - 8 Pin Connector w/8 wires - w/Pins (terminals)- 15' 52-2986 $71.92 QC8 - 3'- 8 Pin Connector w/8 wires - Termination in Field 52-2987 $23.56 QC8 - 15'- 8 Pin Connector w/8 wires - Termination in Field 52-2988 $74.40 **QC12 - 3' - 8 & 4 Pin Connector with 12 wires - Termination in Field 52-2989 $40.92 **QC12 - 15'- 8 & 4 Pin Connector with 12 Wires - Termination in Field 52-2990 $74.40 Note: **56- using timer mode (and ED56)

**TL-56 (and ED56)**59- all functions or latch bolt monitor and remote arm delay**AL- when using 546 harness door staus and remote reset wires

Molex/Repair/Service Kit 52-3000 $173.63 Terminal Female (AWG20-24) 52-3004 $16.54 Terminal Male (AWG 20-24) 52-3006 $16.64

Wiring Diagram Service – Customized Wiring DiagramsCatalog# Description *Net/Net PriceWD-SPEC Specification Package $276.00 WD-P2P Point to Point $331.00 WD-SYSPK System package-Point to Point $551.00 WD-SWP Special Wiring Package Consult Factory

*Note: Prices listed are net/net prices and not list prices. Discounts do not apply.Consult the Electromechanical Technical Services Team @ 800-810-WIRE to establish the type & number of wiring diagrams required for your project.




EL-4ELECTRICAL

ELECTRONIC ACCESSORIES

Prefixes Available on Motor and Push Rail Kit: Price16** Cylinder Lockdown No Addition19 Pushbar without Lexan Touchpad No Addition HK Hex Key Dogging No Addition55 Signal Switch $183.00 Motor and Push Rail Assembly Kit PriceED56E* For E Rail Assembly ED56F* For F Rail Assembly $838.00 ED56G* For G Rail Assembly ED56J* For J Rail Assembly

How To Order: ED56F x 32D* Please specify finish.** 16 Prefix allows ED56 kits to be used with existing 16 rails, it does not include 16- Cylinder Dogging Assembly.

855 Signal Switch Kits for 80 & 30 Series Exit Devices (Specify finish: 3, 4, 9, 10, 10B, 10BL, 20D, 32, 32D) Price855-1 "F" Wide Insert and Switch Assembly $233.00 855-2 "F" Narrow or "E" Narrow Insert and Switch Assembly $233.00 855-3 "G" Wide Insert or 8895E Insert and Switch Assembly $233.00 855-4 "G" Narrow or 8895F Insert and Switch Assembly $233.00 855-5 "E" Wide Insert and Switch Assembly $233.00 855-6 "J" Narrow Insert and Switch Assembly $233.00 855-7 "J" Wide Insert and Switch Assembly $233.00 855-8 8895J & 8895G Insert and Switch Assembly $233.00

Push Buttons, Card Reader, Keypads and Horns Price4241 Momentary Push Button $160.00 4291 Microprocessor Controller Keypad $332.00 4292 Weatherproof Microprocessor Controlled Keypad $356.00 4298 Push Plate engraved with "Push to Open" - Momentary $203.00 4299 Momentary - Push Button - "Exit" $160.00 4301 Card Reader $665.00

Wall Switch Price4296B Blank Push Plate $236.00 4296H Handicap Logo on Push Plate $254.00 4296HP Handicap Logo and "Push to Operate Door" on Plate $282.00 Jamb Switch Price4297HP Handicap Logo and "Push to Operate Door" $282.00 Wall Switches Price4397HP Narrow type switch with handicap logo & push to operate door $161.00 4397HPRF Narrow type switch with handicap logo & push to operate door & RF option $229.00 4396HP 6” x 6” Square type wall switch with handicap logo & press to operate door $238.00 4396HPRF 6” x 6” Square type wall switch with handicap logo & press to operate door & RF option $319.00 4396P 6” x 6” Square type wall switch with press to open $232.00 4396PRF 6” x 6” Square type wall switch with press to open & RF option $319.00 4395HP 6” Round type wall switch with handicap logo & press to operate door $289.00 4395HPRF 6” Round type wall switch with handicap logo & press to operate door & RF option $367.00 4395P 6” Round type wall switch with press to open $289.00 4395PRF 6” Round type wall switch with press to open & RF option $367.00 4341 1” x 3⁄4” Surface mount push button $71.00 4399 2” Square green push button $71.00

EL-5ELECTRICAL




Electrical Accessories Price546 AL-Wiring Harness (For AL- prefix) - Mfg. prior to 7/1/04 $45.00 546-F AL-Wiring Harness (For AL- prefix Exits F-Size Rail) - Mfg. after 7/1/04 $45.00 546-G AL-Wiring Harness (For AL- prefix Exits G-Size Rail) - Mfg. after 7/1/04 $45.00 546-J AL-Wiring Harness (For AL- prefix Exits J-Size Rail) - Mfg. after 7/1/04 $45.00 3261 Armored Door Loop $45.00 3285 Surface Actuator Switch $52.00 3287 Concealed Actuator Switch $58.00 3671LND Universal Controller - Less Nuisance Delay $889.00 3071 Voice Module* - Flush Mounted $1,030.00 3072 Voice Module* - Surface Mounted $1,030.00 52-0070 Junction Box 3071 $231.87 52-0071 Junction Box 3072 $86.80 52-0171 Magnetic Stripe Card Pack for 4301 Card Reader (25 each minimum) $4.61 4352 Junction Box for 4292 $37.00

* Voice Modules provided with standard message "Emergency Exit Only". Door can be opened in 15 seconds.For custom message, consult factory.

Power Supplies Price3267 9VDC Power Supply 700MA $350.00 3520 24VDC Regulated Power Supply 1 amp. $238.00 3521 12VDC Regulated Power Supply 1 amp. $238.00 3540 24VDC Regulated Power Supply 2 amp. $489.00 3541 12VDC Regulated Power Supply 3 amp. $489.00 3570 24VDC Regulated Power Supply 6 amp. $990.00 3571 12VDC Regulated Power Supply 6 amp. $826.00

Battery BackupTMR2 Timer 0-255 minute time delay $150.00 TMR9 Timer 0-35 second time delay $76.00 737 Battery - 12VDC - 4 amp. $56.00 738 Battery - 24VDC - 4 amp. $125.00

EL-6ELECTRICAL




Monitoring Accessories Price881 Monitor Strike $188.00 4414 4 Zone Monitor/Control Console with Junction Box & Cable $2,385.00 4418 8 Zone Monitor/Control Console with Junction Box & Cable $3,073.00 Note: 4414 & 4418 Monitoring Stations are supplied with a 10 foot cable for connection to the interface box

supplied with the monitoring station. Additional cable available at $20.00 per foot.

Prefix For Below Keyswitches

Number Description Price10 SARGENT Signature Key System Add $34.00 /cyl.11 SARGENT XC Key System (not available with 10, 60, 63, 64, V-10 prefixes) No addition 21 SARGENT Construction Key System (lost ball) Standard on all new systems Add $10.00 /cyl.22 SARGENT Construction Key System (split key) to be used on pre-established split key systems only Add $10.00 /cyl.60 SARGENT Removable Disposable Construction plastic plug No addition 63 SARGENT Removable Core Cylinder - Includes Master & Grandmaster Key Charges Add $44.00 /cyl.64 SARGENT Removable Construction Core Cylinder See CK-2 F182 SARGENT KESO Security, Patented, Cylinder Add $47.00 /cyl.82 SARGENT KESO Security Cylinder Add $47.00 /cyl.VA Standard Keyed Cylinder See V-10 Cylinder SectionVC Interchangeable Core Cylinder See V-10 Cylinder SectionVS* Standard Sub-Assembled See V-10 Cylinder SectionVCVS* Interchangeable Core Sub Assembled See V-10 Cylinder Section*Supplied without sidebar, sidebar springs & top pins. Side pins and side pin springs are included.

Keyswitch Number Price

4370 One SPDT maintained contact switch (replaces 4285) $289.00 4371 One SPDT momentary contact switch $260.00 4372 One DPDT maintained contact switch $334.00 4373 One DPDT momentary contact switch $304.00 4374 Two SPDT maintained contact switches $304.00 4375 Two SPDT momentary contact switches (replaces 4281) $276.00 4376 Two DPDT maintained contact switches $356.00 4377 Two DPDT momentary contact switches $334.00 4378 One SPDT momentary & one SPDT maintained contact switch $304.00 4379 One DPDT momentary & one DPDT maintained contact switch $356.00 4380H Single Gang-Horn ONLY $162.00 4380HL Single Gang-Horn with LED's (green & red) $194.00

Suffixes for Key Switches Price

L 2 LED's One-red, One-green Add $34.00

H 1 Horn 80dB Add $69.00

T Adjustable Time Delay (5-120 seconds) Add $201.00

Notes: H or T suffixes require a double gang box. Examples: 4371LH, 4378LH.

Horn and time delay combination is NOT available in the same keyswitch



EL-7ELECTRICAL

ELECTROMAGNETIC LOCKS

1584 Single Door Push Side $547.00 -

1584H Single Door Push Side (Includes dress cover) - $576.00

1585 Double Door Push Side $1,094.00 -

1585J Double Door Push Side (Includes 18” wide dress cover) - $1,152.00

1586 Single Door Pull Side $656.00 $656.00

1587 Double Door Pull Side $1,315.00 $1,315.00

Finish32D EB, ED, 28

Part Number Description

15-0078 Single Dress Cover $40.00

15-0079 Double Dress Cover $75.00

15-2107 Header Extension Bracket $75.00

15-2109 1/4” Stop Filler Plate $22.00




15-2113 Concrete/Wood Frame Bracket $70.00

15-2114 “Z” Bracket with Cover $131.00

32D

15-2116 Double Horizontal Housing $670.00

15-2117 Double Vertical Housing $670.00

15-2118 Single Horizontal Housing LHR $336.00

15-2119 Single Horizontal Housing RHR $336.00

EB, ED, 28

Electromagnetic Locks

Accessories



EL-8ELECTRICAL

ALARMS 540/550 SERIES

540 550

Finish

Series EN, EB, EAB, ERD, ED, EP 10,10B,26,26D

540 $338.00 $379.00

550 $383.00 $423.00

Exit Alarms 540,550,5100,5800


36 6 Lobe security head screws (540, 550, 5110) Add $22.00

36 6 Lobe security head screws (5800) Add $37.00

37 Spanner head screws (540, 550, 5110) Add $15.00

37 Spanner head screws (5800) Add $25.00

91 Remote Power - Not Available on 540 (Requires 3267 Power Supply) Add $33.00

92 Remote Monitoring - Not Available on 540 Add $44.00

93 Continuous Alarm - Not Available on 540 Add $33.00

94 Automatic Re-Arm - Not Available on 540 Add $33.00

Notes:

Thru bolts not supplied standard. Add $4.44 per bolt when ordered with device.

Lever and Knob Trim supplied with 5100 and 5800 series furnished in 26D finish in lieu of 32D.

All Alarmed Exit Hardware is priced with Cylinders where applicable.

Exit Alarm Mounting Plates EB, EN

3273 Narrow Style Mounting Plate for 540/550 $86.00

3274 Narrow Style Mounting Plate for 5100 $115.00

3275 Narrow Style Mounting Plate for 5800 $130.00



EL-9ELECTRICAL

EXIT ALARMS 5100/5800 SERIES

LL OB

5100 Series Finish

Less Trim EN, EB,

EAB, ERD, ED, EP 10,10B,26,26D

5110 $562.00 $586.00

5104

5113 $599.00 $625.00

5115

5800 Series Finish

Less Trim EN, EB,

EAB, ERD, ED, EP 10,10B,32,32D

5810 $657.00 $867.00

5804

5813 $697.00 $908.00

5815

12- 5810 $784.00 $994.00

12- 5804

12- 5813 $824.00 $1,035.00

12- 5815

5100/5800 Series Trim Finish

EN, PEB,

EAB, ERD, ED EP 10,10B,26,26D

28C (13 Function) LL, LB, LP

28K (04 Function) LL, LB, LP

28L (15 Function) LL, LB, LP $202.00

28N (06 Function) LL, LB, LP

28D (10 Function) LL, LB, LP

28COB (13 Function)

28KOB (04 Function) $131.00

28LOB (15 Function)

28KGTB (04 Function) $112.00

28DGTB (10 Function) $57.00

28EGTB (Blank Plate-10 Function) $55.00

28-K-GTB


EL-10ELECTRICAL

ELECTROMECHANICAL 351EHT/EHTDFIRE GUARD CLOSERS 2408 SERIES

2408 Series Single Point Hold Open

(All units require voltage) Finish

Smoke Detector Units EB, ED, EN, EP, EAB

Pull Side Mounting (Regular Arm)

12-2468 120VAC, 24VAC/DC$1,212.00

Pull Side Mounting (Double Egress Arm)

12-2478 (RH or LH) 120VAC, 24VAC/DC $1,262.00

Push Side Mounting (Regular Arm)

12-2498 120VAC, 24VAC/DC $1,212.00

Companion Units – used in conjunction with smoke detector units


9-2468 24VDC ONLY$601.00


9-2478 (RH or LH) 24VDC ONLY$650.00


9-2498 24VDC ONLY$601.00

Stand Alone Units


2468 120VAC, 24VAC/DC$601.00


2478 (RH or LH) 120VAC, 24VAC/DC$650.00


2498 120VAC, 24VAC/DC$601.00

Cleaning Kit Price

247 Cleaning Kit for Smoke Detector $85.00

Additional FeaturesPrefix Description Price36 Torx Security Screws Add $16.00

Suffix Description PriceTB Mortise Nuts when ordered w/Fire Guard N/C

351EHT/EHTD Specify Finish when ordering: EB, ED, EN, EP, EABCatalog Number Description Price351EHT Single Point (Push or Pull) $601.00 351EHTMC Single Point (Push or Pull) w/Metal Cover $615.00 351DEHT Single Point (Push or Pull) w/Delayed Action $631.00 351DEHTMC Single Point (Push or Pull) w/Delayed Action & Metal Cover $647.00 351EHTD handed Single Point (Double Egress) $650.00 351EHTDMC handed Single Point (Double Egress) w/Metal Cover $665.00 351DEHTD handed Single Point (Double Egress) w/Delayed Action $681.00 351DEHTDMC handed Single Point (Double Egress) w/Delayed Action & Metal Cover $696.00

Parts Description Price* 351A Mounting Plate $51.00 * 351D Drop Bracket $51.00 * 351C Plastic Cover $51.00 * 63-0730 Non-handed Metal Cover $40.00 * 4TB Mortise Nuts ordered separate (4 per set) $5.30 /Set



EL-11ELECTRICAL

FIRE GUARD CLOSERS 2900 SERIES

2900 Series Multi Point Hold Open

(All units require handing and voltage) Finish

Smoke Detector Units EN, EB, EP, EAB

Pull Side Mounting (Slide Arm - Rigid)

12-2960 (RH or LH) 120VAC, 24VAC/DC$1,445.00

Pull Side Mounting (Double Egress)

12-2970 (RH or LH) 120VAC, 24VAC/DC$1,491.00

Pull Side Mounting (Slide Arm - Swing Free)

12-2980 (RH or LH) 120VAC, 24VAC/DC$1,484.00


(RH or LH) 120VAC, 24VAC/DC

12-2991 Up to 1” reveals $1,445.00

12-2992 From 1-1/8” - 4” reveals

12-2993 From 4-1/8” - 7” reveals

12-2994 From 4-1/8” - 7” reveals (OY Arm) (Heavy Duty)

12-2995 From 7-1/8” - 8-5/8” reveals ( OYA Arm) (Heavy Duty) $1,595.00

Companion Units – used in conjunction with smoke detector units


9-2960 (RH or LH) 24VDC ONLY$780.00


9-2970 (RH or LH) 24VDC ONLY$828.00


9-2980 (RH or LH) 24VDC ONLY$821.00


(RH or LH) 24VDC ONLY

9-2991 up to 1" reveals $780.00

9-2992 From 1-1/8” - 4” reveals

9-2993 From 4-1/8” - 7” reveals

9-2994 From 4-1/8” - 7” reveals (OY Arm) (Heavy Duty)

9-2995 From 7-1/8” - 8-5/8” reveals ( OYA Arm) (Heavy Duty) $931.00

Stand Alone Units


2960 (RH or LH) 120VAC, 24VAC/DC$780.00


2970 (RH or LH) 120VAC, 24VAC/DC$828.00


2980 (RH or LH) 120VAC, 24VAC/DC$821.00


(RH or LH) 120VAC, 24VAC/DC

2991 Up to 1” reveals $780.00

2992 From 1-1/8” - 4” reveals

2993 From 4-1/8” - 7” reveals

2994 From 4-1/8” - 7” reveals (OY Arm) (Heavy Duty)

2995 From 7-1/8” - 8-5/8” reveals ( OYA Arm) (Heavy Duty) $931.00


Additional Features


80 Adjustable By Pass Hold Open Switch – for 2960, 2970, or 2990- (Not available on 9- Units) $77.00



EL-12ELECTRICAL

4000 SERIESLOW ENERGY DOOR OPERATOR

Standard Duty Double Lever Arm- Stop (Push) Side of Door PriceCatalog # Description *Handed - Specify RH or LH when ordering Finishes Available: EN, EB, EAB

CL4051 Low Ceiling - Double Lever Arm - Handed* 110 deg. Max swing; 2-3/4" to 6-7/8" reveal $3,784.00 CL4052 Low Ceiling - Double Lever Arm - Handed* 180 deg. Max swing; 2-3/4" to 6-7/8" reveal $3,784.00

Slide Track Arms Hinge (Pull) Side of Door PriceCatalog # Description *Handed - Specify RH or LH when ordering Finishes Available: EN, EB, EAB

CL4060 Low Ceiling - Rigid Arm - Handed* 110 deg. Max swing; 1/8" max. reveal $3,947.00

Parts & Accessories *Specify Finish when orderingPart # Description Price

* 4001D Drop Kits – up to 110 degrees $98.00* 4002D Drop Kits – 110-180 degrees $112.00

4296B Blank Push Plate – Wall Switch $236.004296H Handicap Logo on Push Plate – Wall Switch $254.004296HP Handicap Logo and "Push to Operate Door" on Plate – Wall Switch $282.004297HP Handicap Logo and "Push to Operate Door" – Jamb Switch $282.004298 Push Plate engraved with "Push to Open" - Momentary $203.004310 RF Transmitter $118.004313 Radio Control Transmitter (Push plate sold separately) $134.004315 RF Receiver $223.00

* 63-0709 Security Plate $30.1063-0711 Fuse (PC Board) $5.7363-0712 Fuse (120V Input) $5.7363-0713 Capacitor $32.1063-0714 Transformer $61.9163-4160 MPower Body Pump and Motor Assemblies - RH Assembly (CL4060/4067) $2,239.0063-4161 MPower Body Pump and Motor Assemblies - LH Assembly (CL4060/4067) $2,239.0063-4162 MPower Body Pump and Motor Assemblies - Non-handed Assembly (4060) $2,239.0063-4163 Mpower Body Pump and Motor Assemblies - RH Assembly (CL4051/CL4052) $2,239.0063-4164 MPower Body Pump and Motor Assemblies - LH Assembly (CL4051/CL4052) $2,239.0063-4165 MPower Body Pump and Motor Assemblies - Non-handed Assembly (4051/4052) $2,239.00

* 63-4166 Track Assembly $111.96* 63-4167 Arm Assembly $114.36* 63-4168 Arm and Track Assembly - Rigid Arm and Slide Track $222.71* 63-4169 Foot Assembly $108.35* 63-4170 Main Arm and Rod $121.59* 63-4171 Arm Assembly - Standard Duty Double Lever Arm; 110 Degrees $228.73* 63-4172 Main Arm and Rod $121.59* 63-4173 Arm Assembly - Standard Duty Double Lever Arm; 180 Degrees $228.73* 63-4174 Arm Assembly - LH $231.13* 63-4175 Arm and Track Assembly - Double Egress Arm and Slide Track - LH $365.97* 63-4176 Arm Assembly - RH $231.13* 63-4177 Arm and Track Assembly - Double Egress Arm and Slide Track - RH $365.97

63-4178 3 Position Switch Assembly $58.9963-4179 ELS Assembly/Repair Kit $334.66

* 63-4185 Screw Pack for Pull Side Units $39.73* 63-4186 Screw Pack for Push Side Units $46.96* 63-4187 Screw Pack for Drop Application $13.24

63-4188 Operational Sign Kit $30.10* 63-4204 Cover $195.01

63-4205 Control (PC) Board $483.93



EL-13ELECTRICAL

3000 SERIESLOW ENERGY DOOR OPERATOR

Standard Duty Double Lever Arm- Stop (Push) Side of Door PriceCatalog # Description Finishes Available: EN, EB, EAB

3051 Double Lever Arm 170 deg. Max swing; 2-5/8" to 6-3/4" reveal $2,331.00 Slide Track Arms Hinge (Pull) Side of Door PriceCatalog # Description Finishes Available: EN, EB, EAB

3060 Rigid Arm 180 deg. Max swing; 1/8" max. reveal $2,331.00 Parts & Accessories *Specify Finish when orderingPart # Description Price

RFR1 RF Receiver $391.00FOB1 Key Fob Transmitter $95.004397HP Narrow type switch with handicap logo & push to operate door $161.004397HPRF Narrow type switch with handicap logo & push to operate door & RF option $229.004396HP 6" x 6" Square type wall switch with handicap logo & press to operate door $238.004396HPRF 6" x 6" Square type wall switch with handicap logo & press to operate door & RF option $319.004396P 6" x 6" Square type wall switch with press to open $232.004396PRF 6" x 6" Square type wall switch with press to open & RF option $319.004395HP 6" Round type wall switch with handicap logo & press to operate door $289.004395HPRF 6" Round type wall switch with handicap logo & press to operate door & RF option $367.004395P 6" Round type wall switch with press to open $289.004395PRF 6" Round type wall switch with press to open & RF option $367.004341 1" x 3/4" Surface mount push button $71.004399 2" Square green push button $71.0063-0780 Cover $70.0063-0781 Chain $14.0063-0782 Pillow Block $55.0063-0783 On/Off Switch $4.0063-0784 Inverter $446.0063-4287 Arm & Track Assembly $196.0063-4288 Arm Assembly $55.0063-4289 Track Assembly $121.0063-4290 Standard Arm Assembly $60.0063-4291 Arm Assembly Less Rod & Shoe $48.0063-4292 Foot Assembly $19.0063-4293 Door Position Adjustment Assembly $66.0063-4294 Motor Assembly $745.0063-4295 Pinon Extension/Clutch Assembly $181.00


EL-14ELECTRICAL

PARTS



01-0997 Slide Pin Ret. Ring $0.54* 01-1028 Flat Head Mach. Screw 8-32 x 1/4 $0.60* 01-1143 Flat Hd Mach. Screw 12-24 x 5/8" $0.68

01-1146 Flat Head Screw 8-32x3/8" $0.6801-1190 Mounting Screw $1.24

* 01-1206 Pan Head Mach Screw 8-32 x 5/16 $0.5401-1463 Adjusting Rod Screw $1.46

* 01-2298 Flat Hd Wood Screw 12 x 1" $0.54* 01-2303 Flat Hd Wood Screw 12 x 2 1/4" $1.42

01-2306 Flat Head Wood Screw 12 x 3" $1.47* 01-3438 Flat Hd Mach. Screw 12-24 x 1 3/4" $1.21

01-3440 Flat Head Mach Screw 12-24 x 2 1/4" $1.21* 01-4400 Flat Head Mach Screw 12-24 x 2 1/2" $0.93* 01-4401 Pan Head Mach Screw 12-24 x 3/4" $0.12

01-4411 Pan Head Screw 12-24 x 3/8" $0.52* 01-4412 Flat Head Mach Screw 12-24 x 5/8" $0.26

01-4414 Pan Head Screw 12-24 x 3/8" $0.24* 01-4471 Flat Head Self Tapping Screw 4-40 x 1/4" $0.12

01-4472 Flat Head Mach. Screw M5 x 10 $0.1401-4476 Pan Head Screw w/Lockwasher 6-32 x 5/8" $0.2801-7005 Diode (for 59-) $1.2401-7011 Star Ring Terminal $0.5701-7012 Self Adhesive Bumper $0.6701-9036 3A-AC Fuse (3560) $5.4701-9041 1.5A-AC Fuse (3510) $3.1301-9042 1.8A In Line Fuse (3510) $4.5701-9048 Fuse (old style) $6.8301-9063 Washer $0.1208-4687 Fail Secure Solenoid Assy. $493.3008-4688 Fail Secure Solenoid Assy. $493.3013-351 351/2408 1351EHT Closer Body $240.0013-351DA 351/2408 Closer Body w/Delayed Action $267.0032-1093 Connector -2 Wire $2.6432-1144 Emergency Decal (5800) $2.5432-1190 Screw 4-4 Ounce x 1/4” $0.6332-1272 Wire Mesh for 5100/5800 CVR $6.9632-1364 1.5A-AC Fuse $6.7732-1379 Adaptor Plate for 5800 $225.6632-7023 Magnet Pack (540/550) $23.15

* 32-7033 5800 Cover Assy. w/Circuit Board $601.00* 32-7035 5810 Cover Assembly w/C-Board $601.00

32-7043 Battery Snap/Wire Assy. $3.1132-7044 Tamper Switch & Bracket Assy 5100/5800 $72.7332-7059 O/S Shutoff Switch Assy. $47.32

* 32-7064 Cover Assembly $100.3632-7067 Chassis Assy. (500-01 Series) $403.4632-7070 5100/5800 Circuit Board w/Back Plate Assy $281.0132-7097 Switch $31.6232-7159 Chassis Assy. (5100) $298.0832-7165 Remote Power/Monitor Connector (Alarms) $82.35

* 32-7180 5100/5800 CVR/Wire Mesh Assy. $164.4232-7184 Remote Power Connector $49.5832-7185 Remote Monitor Connector $16.57

* 32-7228 Misc. Pkg. A (5104/5110) $354.13* 32-7229 Misc. Pkg. B (5104/5110) $398.39* 32-7230 Misc. Pkg. C (5100) $58.19* 32-7231 Misc. Pkg. D (5115) $398.39

32-7232 Misc. Pkg. E (5804) $278.2432-7233 Misc. Pkg. F (5804/5813) $313.02

32-7234 Misc. Pkg. G (5810) $252.9632-7235 Misc. Pkg. H (5815) $316.1832-7236 Misc. Pkg. I (5800/12-5800) $22.7732-7237 Misc. Pkg. J (12-5804) $506.0232-7238 Misc. Pkg. K (12-5804/12-5813) $531.1832-7239 Misc. Pkg. L (12-5810) $474.2832-7240 Misc. Pkg. M (12-5815) $531.18

* 351C Plastic Cover $24.0052-0024 12V Lead Acid Battery $338.5052-0045 Sounder Horn $65.7252-0047 Red LED for Keyswitch $14.2752-0048 Green LED for Keyswitch $14.2752-0049 Single Gang Cover Plate (w/cyl. hole) $37.2152-0050 Single Gang Cover Plate

(w/cyl. and LED holes) $40.9252-0051 Dbl. Gang Cover Plate (w/cyl. LED's, horn hole) $47.1152-0052 Dbl. Gang Cover Plate (w/cyl., LED holes) $44.6452-0053 Dbl. Gang Cover Plate (w/cyl. hole) $40.9252-0054 Dbb. Gang Cover Plate (w/cyl. and horn hole) $44.6452-0069 KP I/S Battery Cover $10.55

* 52-0091 Keypad Cyl. Cover $71.4152-0136 Lens Cover $1.4252-0328 Transformer (351 EHT/EHTD) $71.9252-2006 Power Supply Board $456.2952-2062 Jumper for Batteries $68.1952-2099 SPDT Momentary Switch Assy $50.8452-2102 SPDT Maintained Switch Assy $50.8452-2104 DPDT Momentary Switch Assy $68.1952-2105 DPDT Maintained Switch Assy $68.1952-2204 Latchbolt Mon. Sw./Harness (Rim Device) $55.8152-2217 59-80 CVR Switch Assy. $55.8152-2220 Latchbolt Mon. Sw./Harness (CVR) $57.0352-2290 Battery Backup Board $425.3052-2307 AL Circuit Board (Old) $166.1552-2320 AL-80 Switch Assy. $27.2752-2675 AL Circuit Board (New) $166.1552-3460 Motor Controller ASY(56-) $275.60

* 60-0529 Washer $2.40* 60-2179 Mortise Nut Pack (2 1/4" Door Thickness) $8.05* 63-0156 OT Channel $65.36

63-0228 Circuit Mounting Post $2.79* 63-0256 Swivel Arm $40.86

63-0259 Smoke Detector Mtg. Post $10.9663-0264 Slide $16.3363-0290 Switch Guide $9.5163-0374 Wickman Fuse 1/4 Amp $6.7763-0498 Circuit Brd. Screw Spacer $0.7963-0501 Smoke Det. Mtg. Screw $0.53

* 63-0502 Flat Head Tapping Screw 12 x 3/8" $0.6863-0509 Circuit Brd. Mtg. Screw $1.3363-0541 Conduit Support $6.65

* 63-0665 2900 4 x 12 Pozidriv Screw $8.7063-0704 351 EHT Slide $4.6563-0705 Slide $5.30

* 63-0707 Track (Pull) $66.40* 63-0708 End Cap (2408) $5.20* 63-0715 Channel (351 EHT) $67.06* 63-0716 Latch Cover (351 EHT) $40.24

63-0723 Conduit Adapter Plug 1/2" (EHT) $2.68





EL-15ELECTRICAL

PARTS


63-0727 Circuit Board Insulator(EHT) $2.6863-0728 Hole Plug 1/4"(EHT) $1.34

* 63-0730 Optional - Metal Cover (Non-handed) $39.68* 63-0731 Track (Push) - 2498 $65.09

63-0732 Spacer (Pull) - 2408 $5.2063-0733 Track Insert (Push) - 2498 $1.9663-0734 Track Insert (Pull) - 2468/2478 $1.96

* 63-2216 O Foot Assembly $31.62* 63-2217 OZ Foot Assembly $39.46* 63-2218 OZA Foot Assembly $39.46* 63-2607 Main Arm Assembly-12” $39.46

63-2868 Output Connector Assy $12.89* 63-2874 Link Extension Assembly (Main Arm 351EHT) $66.29* 63-3056 Dbl. Egress Arm–RH $112.89* 63-3057 Dbl. Egress Arm–LH $112.89

63-3210 Smoke Detector Assembly $281.7063-3212 Accessory Wire Pack $118.3463-3226 Tamper Switch & Wire Assy $99.34

* 63-3314 OY Arm Assembly-16” $220.89* 63-3315 OYA Arm Assembly-18” $220.89

63-3413 SPDT $149.9663-3423 Slide & Pin Assembly (2407) $3.2363-3424 Mounting Plate (Long-Push) $26.5663-3425 Mounting Plate (Long-Pull) $26.5663-3426 Mounting Plate (Short Push Side) $26.5663-3428 Circuit Board - 2407/2594 120VAC $278.8363-3429 Circuit Board - 2407/2594 24VDC $135.4563-3430 Circuit Board - 2407/2594 24VAC $143.3763-3431 Screw Pack $7.84

* 63-3653 2900 Main Arm Assy LH $127.39* 63-3654 2900 Main Arm Assy RH $127.39* 63-3688 2900 Slide Arm Assy Rigid $79.66* 63-3689 2900 Slide Arm Assy $175.29* 63-3699 2900 Roller/End Cap PK $25.48

63-3700 2900 Screw Pack $12.74* 63-3717 2900 Cover Assy-Regular $268.23* 63-3718 2900 Cover Assy Smk Det. $268.23* 63-3719 2900 Closer Body Assy $637.37* 63-3733 2900LH 24VDC CLS/Holder $811.38* 63-3734 2900RH 24VDC CLS/Holder $811.38

63-3787 2900 Hold Open Pack $255.57* 63-4200 EHT Track Assy $398.48

63-4201 EHT Latch Assy $199.2263-4202 EHT Circuit Board $119.55

* 63-4206 EHT Arm and Roller Assy $53.1263-4211 EHT Parts Pack $12.7863-4212 EHT Standard Screw Pack $11.4963-4215 Circuit Board 120 VAC $265.6563-4216 Circuit Board 24 VAC/DC $146.10

* 63-4219 Arm and Roller Assembly $46.4963-4233 Latch Assembly $199.22

* 63-4238 12-2468 24VAC/DC Track Assy. $788.95* 63-4239 12-2468 120VAC Track Assy. $788.95* 63-4240 12-2498 24VAC/DC Track Assy. $788.95* 63-4241 12-2498 120VAC Track Assy. $788.95* 63-4245 2468 24AC/DC Track Assy. $433.93* 63-4246 2468 120VAC Track Assy. $433.93* 63-4247 2498 24AC/DC Track Assy. $433.93* 63-4248 2498 120VAC Track Assy. $433.93


* 63-4252 9-2468 (Pull) Track Assy. $433.93* 63-4253 9-2498 (Push) Track Assy. $433.93

68-0658 Switch Mounting Brkt $2.6068-0704 Decal for Delayed Egress $40.1968-0807 Lever for 56- $35.8268-2597 Bridge Rect. Pack $19.5368-2759 55- Switch $62.6068-3034 57- Circuit Board and Switch Assy $714.4182-0444 Wire Protector $1.5082-3615 Locking Tail Assy (8270/71) $17.8982-3618 Locking Tail Assy (8272/73) $20.29

PROFILE SERIES

TABLE OF CONTENTS



PROFILE SERIES - STAND ALONE PRODUCTS

How to Order/ANSI Finish & Function Comparison.................PS-1

10-Line Cylindrical Lock - KP, G1, RF Technology

10-Line Stand Alone Products Prefixes ...................................PS-2

10-Line Keypad, Profile Series, RF Technology.......................PS-3

8200 Series Mortise Lock - KP, G1, RF Technology

8200 Stand Alone Products Prefixes .......................................PS-4

8200 Keypad, Profile Series.....................................................PS-5

8200 Stand Alone Products Prefixes .......................................PS-6

8200 RF Technology.................................................................PS-7

80 Series - Rim & Mortise Exit Device - KP, G1, RF Technology

8800/8900/ Stand Alone Products Prefixes .............................PS-8

8800/8900 Keypad, Profile Series, RF Technology..................PS-9

Accessories ....................................................................................PS-10

Parts & Accessories .......................................................................PS-11

10-Line Parts & Accessories ..........................................................PS-12

8200 Series Parts & Accessories

8200 Keypad Trim and Parts ..................................................PS-13

8200 Stand Alone Products Trim/Parts ..................................PS-14

80 Series Parts & Accessories

80 Series Trim & Trim Kits ......................................................PS-15

80 Series Parts & Accessories...............................................PS-16

PROFILE SERIES - v.N.1 WIEGAND INTERFACEOPEN ARCHITECTURE

How to Order/ANSI Finish & Function Comparison...............PS-17

10-Line Cylindrical Lock - v.N1

v.N1 10-Line Prefixes .............................................................PS-18

v.N1 10-Line Cylindrical Lock Profile Series Open Architecture Wiegand™ Interface.................................PS-19

8200 Series Mortise Lock - v.N1

v.N1 8200 Prefixes .................................................................PS-20

v.N1 8200 Mortise Lock Profile Series Open Architecture Wiegand™ Interface.................................PS-21

80 Series - Rim & Mortise Exit Device - v.N1

v.N1 80 Series Prefixes ..........................................................PS-22

v.N1 80 Series Exit Device Profile Series Open Architecture Wiegand™ Interface.................................PS-23

Accessories

v.N1 Profile Series Open Architecture Wiegand™Interface Modules, Utility Boxes, Keypad Controllers.............PS-24

v.N1 Profile Series Open Architecture Wiegand™Interface HID ProxCard, Fobs, MicroProxTags, Wireless BioFob .....................................................................PS-25



PS-1PROFILE SERIES

STAND ALONE PRODUCTS

How to Order

Step Description ExampleBored

Quantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 10-Product Series 10L Profile Series 10 Ea. 10-10Function 10G77 10 Ea. 10-10G77Technology/Trim Consult catalog for available technology and lever designs 10 Ea. 10-G1-10G77 PKLFinish Consult catalog for available finishes 10 Ea. 10-G1-10G77 PKL 26DMortiseQuantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 10-Product Series 8200 Profile Series 10 Ea. 10-82Function Consult catalog for available functions 10 Ea. 10-8276Technology/Trim Consult catalog for technology and available lever designs 10 Ea. 10-G1-8276 PKLFinish Consult catalog for available finishes 10 Ea. 10-G1-8276 PKL 26DHand Specify Hand 10 Ea. 10-G1-8276 PKL 26D RHExitQuantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 12-Technology LU 10 Ea. 12-G1-LUProduct Series 80 Series Profile Series 10 Ea. 12-G1-LU-88Function Consult catalog for available functions 10 Ea. 12-G1-LU-8877Trim - ET Consult catalog for available lever designs 10 Ea. 12-G1-LU-8877 ETLFinish (Trim/ET) Consult catalog for available finishes 10 Ea. 12-G1-LU-8877 ETL 26D/32DHand Specify Hand 10 Ea. 12-G1-LU-8877 ETL 26D/32D RHRDoor Size Specify Door width 10 Ea. 12-G1-LU-8877 ETL 26D/32D RHR x 36"TechnologyCatalog # DescriptionKP Keypad - 100 UserLK Profile Series - Keypad - 100 Users G1-LU Profile Series - Keypad - 2,000 Users G1-PA Profile Series - Prox only - 2,000 Users G1-PK Profile Series - Prox & Keypad - 2,000 Users G1-TU Profile Series - RF Actuation Keypad - 2,000 Users G1-TA Profile Series - RF Actuation Prox only - 2,000 Users G1-TP Profile Series - RF Actuation Prox & Keypad - 2,000 users

FunctionCatalog # DescriptionBored Lock

10G77 Entry Lock with cylinder override

Mortise Lock8276 Entry Lock with cylinder override and deadbolt8277 Entry Lock with deadbolt (no cylinder)8278 Entry Lock with cylinder override (no deadbolt)8279 Entry Lock (no cylinder or deadbolt)82243 Dorm Room Anti-Lock w/deadbolt & I/S LeverSwitch

80 Series Exit - Rim8877 with cylinder override8878 without cylinder override

80 Series Exit - Mortise8977 with cylinder override8978 without cylinder override

FinishSARGENT Description ANSIUS3 Polished brass 605US4 Satin brass 606US9 Polished bronze 611US10 Satin bronze, clear powder coat 612US10B Oxidized satin bronze oil rubbed 613US10BL Oxidized satin bronze, clear powder coat —US15 Satin nickel, clear coated 619US20D Dark statuary bronze, clear powder coat —US26 Polished chrome 625US26D Satin chrome 626US32 Polished stainless steel 629US32D Satin stainless steel 630Note: Refer to each price page for available finishes by

product series.



PS-2PROFILE SERIES

10-LINE STAND ALONE PRODUCTS

Prefix Description Price10 SARGENT Signature Key System $34.00 /cyl11 SARGENT XC Key System (not used w/10, 60, 63, 64,SC,SE,V-10 prefixes) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $10.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $10.00 /cyl23 Lockset x 3 3/4" Backset $8.00 25 Lockset x 5" Backset $12.00 28 Lockset x ANSI A115.2-1971 Strike #808: - Lip lengths 1-1/8", 1-1/4" or 1-3/8" No addition

- Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments $10.00 30 10 Line Lever to accept Schlage cylinder (no cylinder provided) No addition 36 6 Lobe head security screws $12.00 37 Spanner head security screws $8.00 41 3/4" throw with latch $48.00 60 SARGENT Removable disposable construction core No Add63 SARGENT Removable core cylinder - includes MK and GMK charges $44.00 /cyl.64 SARGENT Removable construction core cylinder See page CK-2 6573 Small Format 6-Pin uncombinated core (not avail. w/J Lever) - refer to CK-8 for keyways $31.00 /cyl.65737P Small Format 7-Pin uncombinated core (not avail. w/J Lever) - refer to CK-8 for keyways $31.00 /cyl.70 Small Format Interchangeable disposable plastic construction core (not avail. w/J Lever) No Add72 Small Format Interchangeable 6-Pin construction core (not avail. w/J Lever)(7-Pin with 11 prefix) See Below 73 Small Format Interchangeable 6-Pin core (not avail. w/J Lever) $40.00 /cyl.737P Small Format Interchangeable 7-Pin core (not avail. w/J Lever) $40.00 /cyl.75* Handicap warning on inside lever $26.00 76* Handicap warning on outside lever $26.00 77* Handicap warning on both levers $52.00 80 Levers to accept KESO and KESO F1 - no cylinder provided (not avail. w/J Lever) No addition 82 SARGENT KESO Security Cylinder (not avail. w/J Lever) (for existing systems) $47.00 /cylF182 SARGENT KESO Security Cylinder - Patented - (not avail. w/J Lever) $47.00 /cyl91 Remote Power/Unlocking - requires 3267 Power Supply $33.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P,

KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DM Forced/propped door harness (not available on 82243) Add $10.00 SC Schlage C Keyway cylinder, 0-bitted No addition SE Schlage E Keyway cylinder, 0-bitted No addition SG MicroShield™ an antimicrobial powder coat finish $21.00 VA SARGENT V-10 Standard cylinder See V-10 Cylinder SectionVS SARGENT V-10 Sub-Assembled cylinder See V-10 Cylinder Section

* Milled plastic backing on inside of lever handle.



PS-3PROFILE SERIES

10-LINE STAND ALONE PRODUCTS

10L Profile Series 3, 9,Function 10B, 26D 4, 10, 26 10BL, 15, 20D

10G77 LK x Lever Design Keypad Entry Lock with Cylinder Override (100 Users) $1,040.00 $1,144.00 $1,200.00

G1-10G77 LU x Lever Design Keypad Entry Lock with Cylinder Override (2,000 Users) $1,462.00 $1,565.00 $1,621.00

G1-10G77 PA x Lever Design * Proximity Only Entry Lock with Cylinder Override (2,000 Users) $1,884.00 $1,986.00 $2,043.00

G1-10G77 PK x Lever Design Proximity and Keypad Entry Lock with Cylinder Override (2,000 Users) $1,948.00 $2,051.00 $2,109.00

*Requires SofLink Plus for programming.

Function 3, 9,

Single Cylinder 10B, 26D 4, 10, 26 10BL, 15, 20D

KP10G77 Storeroom x Rose x Lever Design (100 users) $810.00 $912.00 $969.00

10L-KeypadLever Designs: B, J, L, PRose Design: L, G

Note: For Coastal Series Levers – Y&G, add $59.00 to below prices.

10L-Profile SeriesLever Designs: B, J, L, P

Note: For Coastal Series Levers – Y&G, add $59.00 to below prices.

10L Profile Series with RF Technology 3, 9,Function Function Description 10B, 26D 4, 10, 26 10BL, 15, 20D

G1-10G77 TU x Lever Design RF Actuation Keypad Entry Lock with Cylinder Override (2,000 users) $1,806.00 $1,909.00 $1,968.00

G1-10G77 TA x Lever Design *RF Actuation Prox Only Entry Lockwith Cylinder Override (2,000 users) $2,229.00 $2,331.00 $2,388.00

G1-10G77 TP x Lever Design RF Actuation Proximity & Keypad Entry Lock with Cylinder Override (2,000 users) $2,292.00 $2,394.00 $2,453.00

Note: RF FOB must be ordered separately from locks.PDA required for programming using Soflink Plus™ with Soflink PDP™*Requires SofLink Plus for programming.



PS-4PROFILE SERIES

8200 STAND ALONE PRODUCTS

Prefix Description Price3 Stainless Steel hub for institutional specifications (8200 only) $55.00 10 SARGENT Signature Key System $34.00 /cyl10UL SARGENT Signature Key System meeting UL437 (8200/80Ser.) $48.00 /cyl11 SARGENT XC Key System (not used w/10, 60, 63, 64,SC,SE,V-10 prefixes) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $10.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $10.00 /cyl23 4-7/8" ANSI Strike No addition 36 6 Lobe head security screws $19.00 37 Spanner head security screws $12.00 60 SARGENT Removable disposable construction core No Add63 SARGENT Removable core cylinder - includes MK and GMK charges $44.00 /cyl.64 SARGENT Removable construction core cylinder See page CK-2 6573 Small Format 6-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.65737P Small Format 7-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.70 Small Format Interchangeable disposable plastic construction core No Add72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 prefix) See Below 73 Small Format Interchangeable 6-Pin core $40.00 /cyl.737P Small Format Interchangeable 7-Pin core $40.00 /cyl.75 Handicap warning on inside lever $56.00 76 Handicap warning on outside lever $56.00 77 Handicap warning on both levers $112.00 81 Cylinder to accept KESO & KESO F1 removable core - no core provided No addition 82 SARGENT KESO Security Cylinder (for existing systems) $47.00 /cylF182 SARGENT KESO Security Cylinder - Patented $47.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $67.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $67.00 /cyl84 SARGENT KESO Security removable construction core cylinder See CK-17 91 Remote Power/Unlocking - requires 3267 Power Supply $33.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P,

KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.DM Forced/propped door harness (not available on 82243) Add $10.00 SC Schlage C Keyway cylinder, 0-bitted No addition SE Schlage E Keyway cylinder, 0-bitted No addition SG MicroShield™ an antimicrobial powder coat finish $31.00 VA SARGENT V-10 Standard cylinder See V-10 Cylinder SectionVS SARGENT V-10 Sub-Assembled cylinder See V-10 Cylinder SectionVC SARGENT V-10 Interchangeable Core cylinder See V-10 Cylinder SectionVCVS SARGENT V-10 Interchangeable Core cylinder - Sub-Assembled See V-10 Cylinder Section



PS-5PROFILE SERIES


8200 KEYPADLever Designs: A, B, E, F, J, L, P, WRose Design: L, LN

Note: For Coastal Series Levers – C, G, R, S, Y; Coastal Series Roses - TR, CR - add $116.00 to below prices.

For Studio Collection, Metro Elements Levers -MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP,MQ, MR, MS, MT, MU, MV, MW; Studio Collection Metro Roses - CO, CR, LN, O, TO, TR – add $116.00 to below prices.

Functions 4, 26D 10, 10B, 10BL, 20D 3, 9, 15, 26

KP8276 Keypad Entry lock with cylinder override $868.00 $971.00 $1,030.00

KP8277 Keypad Entry lock - no cylinder available $818.00 $919.00 $978.00

KP8278 Keypad Entry lock with cylinder override, no deadbolt $853.00 $956.00 $1,012.00

KP8279 Keypad Entry lock - no cylinder override and no deadbolt $802.00 $905.00 $962.00

8200 Profile Series 10, 10B 3, 9,Function Function Description 4, 26D 10BL, 20D 15, 26

82243 PA x Lever Design * Proximity ONLY Dorm Room Anti-lock w/Deadbolt and I/S Lever Switch (2,000 Users)$1,944.00 $2,045.00 $2,102.00

82243 PK x Lever Design Proximity Keypad Dorm Room Anti-lock w/Deadbolt and I/S Lever Switch (2,000 Users)$2,006.00 $2,110.00 $2,167.00

8276 LK x Lever Design Keypad Entry Lock w/Cylinder Override, w/Deadbolt (100 Users) $1,100.00 $1,202.00 $1,259.00

G1- 8276 LU x Lever Design Keypad Entry Lock w/Cylinder Override, w/Deadbolt (2,000 Users) $1,520.00 $1,623.00 $1,682.00

G1- 8276 PA x Lever Design *Proximity ONLY Entry Lock w/Cylinder Override, w/Deadbolt (2,000 Users) $1,944.00 $2,045.00 $2,102.00

G1- 8276 PK x Lever Design Proximity and Keypad Entry Lock w/Cyl. Override, w/Deadbolt (2,000 Users) $2,006.00 $2,110.00 $2,167.00

8277 LK x Lever Design Keypad Entry Lock w/o Cylinder Override, w/Deadbolt (100 Users) $1,049.00 $1,151.00 $1,207.00

G1- 8277 LU x Lever Design Keypad Entry Lock w/o Cylinder Override, w/Deadbolt (2,000 Users) $1,471.00 $1,572.00 $1,630.00

G1- 8277 PA x Lever Design *Proximity ONLY Entry Lock w/o Cylinder Override, w/Deadbolt (2,000 Users) $1,892.00 $1,995.00 $2,052.00

G1- 8277 PK x Lever Design Proximity and Keypad Entry Lock w/o Cyl. Override, w/Deadbolt (2,000 Users) $1,954.00 $2,057.00 $2,115.00

8278 LK x Lever Design Keypad Entry Lock w/Cylinder Override, w/o Deadbolt (100 Users) $1,085.00 $1,187.00 $1,245.00

G1- 8278 LU x Lever Design Keypad Entry Lock w/Cylinder Override, w/o Deadbolt (2,000 Users) $1,507.00 $1,609.00 $1,666.00

G1- 8278 PA x Lever Design *Proximity ONLY Entry Lock w/Cylinder Override, w/o Deadbolt (2,000 Users) $1,927.00 $2,029.00 $2,088.00

G1- 8278 PK x Lever Design Proximity and Keypad Entry Lock w/Cyl. Override, w/o Deadbolt (2,000 Users) $1,991.00 $2,094.00 $2,151.00

8279 LK x Lever Design Keypad Entry Lock w/o Cylinder Override, w/o Deadbolt (100 Users) $1,033.00 $1,136.00 $1,194.00

G1- 8279 LU x Lever Design Keypad Entry Lock w/o Cylinder Override, w/o Deadbolt (2,000 Users) $1,454.00 $1,558.00 $1,614.00

G1- 8279 PA x Lever Design *Proximity ONLY Entry Lock w/o Cylinder Override, w/o Deadbolt (2,000 Users) $1,875.00 $1,978.00 $2,036.00

G1- 8279 PK x Lever Design Proximity and Keypad Entry Lock w/o Cyl. Override, w/o Deadbolt (2,000 Users) $1,942.00 $2,042.00 $2,099.00

*Requires SofLink Plus for programming.

8200 PROFILE SERIESLever Designs: A, B, E, F, J, L, P, W

Note: For Coastal Series Levers – C, G, R, S, Y add $116.00 to below prices.

For Studio Collection, Metro Elements Levers -MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP,MQ, MR, MS, MT, MU, MV, MW – add $116.00 to below prices.

PS-6PROFILE SERIES




Prefix Description Price3 Stainless Steel hub for institutional specifications (8200 only) $55.00 10 SARGENT Signature Key System $34.00 /cyl10UL SARGENT Signature Key System meeting UL437 (8200/80Ser.) $48.00 /cyl11 SARGENT XC Key System (not used w/10, 60, 63, 64,SC,SE,V-10 prefixes) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $10.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $10.00 /cyl23 4-7/8" ANSI Strike No addition 36 6 Lobe head security screws $19.00 37 Spanner head security screws $12.00 60 SARGENT Removable disposable construction core No Add63 SARGENT Removable core cylinder - includes MK and GMK charges $44.00 cyl.64 SARGENT Removable construction core cylinder See page CK-2 6573 Small Format 6-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.65737P Small Format 7-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.70 Small Format Interchangeable disposable plastic construction core No Add72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 prefix) See Below 73 Small Format Interchangeable 6-Pin core $40.00 cyl.737P Small Format Interchangeable 7-Pin core $40.00 /cyl.75 Handicap warning on inside lever $56.00 76 Handicap warning on outside lever $56.00 77 Handicap warning on both levers $112.00 81 Cylinder to accept KESO & KESO F1 removable core - no core provided No addition 82 SARGENT KESO Security Cylinder (for existing systems) $47.00 /cylF182 SARGENT KESO Security Cylinder - Patented $47.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $67.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $67.00 /cyl84 SARGENT KESO Security removable construction core cylinder See CK-17 91 Remote Power/Unlocking - requires 3267 Power Supply $33.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P,


PS-7PROFILE SERIES




8200 Profile Series with RF Technology 10, 10B 3, 9,Function Function Description 4, 26D 10BL, 20D 15, 26

G1- 8276 TU x Lever Design RF Actuation Keypad Entry Lock w/Cylinder Override, w/D.bolt (2,000 Users) $1,868.00 $1,969.00 $2,026.00

G1- 8276 TA x Lever Design * RF Actuation Proximity Entry Lock w/Cylinder Override w/D.bolt (2,000 users) $2,288.00 $2,390.00 $2,447.00

G1- 8276 TP x Lever Design RF Actuation Proximity & Keypad Entry Lock w/Cylinder Override,

w/Deadbolt (2,000 Users)$2,352.00 $2,454.00 $2,512.00

G1- 8277 TU x Lever Design RF Actuation Keypad Entry Lock w/o Cylinder Override,

w/Deadbolt (2,000 Users) $1,815.00 $1,917.00 $1,974.00

G1- 8277 TA x Lever Design * RF Actuation Proximity Entry Lock w/o Cylinder Override w/D.bolt (2,000 users) $2,237.00 $2,339.00 $2,396.00

G1- 8277 TP x Lever Design RF Actuation Proximity & Keypad Entry Lock w/o Cylinder Override,

w/Deadbolt (2,000 Users)$2,300.00 $2,402.00 $2,461.00

G1- 8278 TU x Lever Design RF Actuation Keypad Entry Lock w/Cylinder Override,

w/o Deadbolt (2,000 Users) $1,851.00 $1,953.00 $2,010.00

G1- 8278 TA x Lever Design * RF Actuation Proximity Entry Lock w/Cylinder Override w/o D.bolt (2,000 users) $2,272.00 $2,374.00 $2,433.00

G1- 8278 TP x Lever Design RF Actuation Proximity & Keypad Entry Lock w/Cylinder Override,

w/o Deadbolt (2,000 Users)$2,337.00 $2,439.00 $2,496.00

G1- 8279 TU x Lever Design RF Actuation Keypad Entry Lock w/o Cylinder Override,

w/o Deadbolt (2,000 Users) $1,800.00 $1,902.00 $1,958.00

G1- 8279 TA x Lever Design * RF Actuation Proximity Entry Lock w/o Cylinder Override w/o D.bolt (2,000 users) $2,220.00 $2,323.00 $2,382.00

G1- 8279 TP x Lever Design RF Actuation Proximity & Keypad Entry Lock w/o Cylinder Override,

w/o Deadbolt (2,000 Users)$2,285.00 $2,387.00 $2,444.00

NOTE: RF fob must be ordered separately from locks.

PDA required for programming using Soflink Plus™ with Soflink PDP™

8200 PROFILE SERIESLever Designs: A, B, E, F, J, L, P, W


For Studio Collection, Metro Elements Levers - MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP,MQ, MR, MS, MT, MU, MV, MW – add $116.00 to below prices.



PS-8PROFILE SERIES

8800/8900 STAND ALONE PRODUCTS

Prefix Description Price10 SARGENT Signature Key System $34.00 /cyl10UL SARGENT Signature Key System meeting UL437 $48.00 /cyl11 SARGENT XC Key System (not used w/10, 60, 63, 64,SC,SE,V-10 prefixes) No Add1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core See page CK-2 11737P Small Format interchangeable core - to accept 7 pin XC permanent core $40.00 / cyl.12 UL Fire Label Exit Device $127.00 16 Cylinder Lockdown feature in rail $94.00 19 80 Series pushbar without Lexan Touchpad No addition 21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $10.00 /cyl22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $10.00 /cyl23 4-7/8" ANSI Strike No Add36 6 Lobe head security screws (8800) $37.00 36 6 Lobe head security screws (8900) $41.00 37 Spanner head security screws (8800) $25.00 37 Spanner head security screws (8900) $27.00 60 SARGENT Removable disposable construction core No Add63 SARGENT Removable core cylinder - includes MK and GMK charges $44.00 /cyl.64 SARGENT Removable construction core cylinder See page CK-2 6573 Small Format 6-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.65737P Small Format 7-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.70 Small Format Interchangeable disposable plastic construction core No Add72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 prefix) See Below 73 Small Format Interchangeable 6-Pin core $40.00 /cyl.737P Small Format Interchangeable 7-Pin core $40.00 /cyl.75 Warning Inside - Abrasive strip on rail $71.00 76 Warning Outside - Milled outside lever $56.00 77 Warning Inside and Outside - Abrasive strip on rail, Milled outside Lever $127.00 81 Cylinder to accept KESO & KESO F1 removable core - no core provided No addition 82 SARGENT KESO Security Cylinder (for existing systems) $47.00 /cylF182 SARGENT KESO Security Cylinder - Patented $47.00 /cyl83 SARGENT KESO Security Removable core cylinder (for existing systems) $67.00 /cylF183 SARGENT KESO Security Removable core cylinder - Patented $67.00 /cyl84 SARGENT KESO Security removable construction core cylinder See CK-17 91 Remote Power/Unlocking - requires 3267 Power Supply $33.00 BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P,




PS-9PROFILE SERIES

8800/8900 STAND ALONE PRODUCTS

KP8800 and KP8900 Keypad Exit Devices 3, 4, 9, 10BL,Catalog# 10, 10B, 32D 15, 20D, 32KP8877 ET x lever Keypad Rim Exit Device with cylinder override $2,039.00 $2,141.00 KP8878 ET x lever Keypad Rim Exit Device - no cylinder override $1,987.00 $2,090.00 KP8977 ET x lever Keypad Mortise Exit Device with cylinder override $2,253.00 $2,354.00 KP8978 ET x lever Keypad Mortise Exit Device - no cylinder override $2,200.00 $2,302.00

8800 Profile Series Rim Exit Device 3, 4, 9,10BL Catalog# 10, 10B, 32D 15, 20D, 32

LK8877 ET x Lever Design Keypad Rim Exit Device with Cylinder Override (100 Users) $2,099.00 $2,201.00 G1- LU8877 ET x Lever Design Keypad Rim Exit Device with Cylinder Override (2,000 Users) $2,497.00 $2,598.00 G1- PA8877 ET x Lever Design * Proximity ONLY Rim Exit Device with Cylinder Override (2,000 Users) $2,894.00 $2,994.00 G1- PK8877 ET x Lever Design Proximity and Keypad Rim Exit Device with Cylinder Override (2,000 Users) $2,955.00 $3,056.00

LK8878 ET x Lever Design Keypad Rim Exit Device without Cylinder override (100 Users) $2,047.00 $2,150.00 G1- LU8878 ET x Lever Design Keypad Rim Exit Device without Cylinder override (2,000 Users) $2,445.00 $2,548.00 G1- PA8878 ET x Lever Design * Proximity ONLY Rim Exit Device without Cylinder Override (2,000 Users) $2,842.00 $2,944.00 G1- PK8878 ET x Lever Design Proximity and Keypad Rim Exit Device without Cylinder Override (2,000 Users) $2,903.00 $3,006.00 8900 Profile Series Mortise Exit Device 3, 4, 9,10BL Catalog# 10, 10B, 32D 15, 20D, 32

LK8977 ET x Lever Design Keypad Mortise Exit Device with Cylinder Override (100 Users) $2,312.00 $2,413.00 G1- LU8977 ET x Lever Design Keypad Mortise Exit Device with Cylinder Override (2,000 Users) $2,709.00 $2,811.00 G1- PA8977 ET x Lever Design * Proximity ONLY Mortise Exit Device with Cylinder Override (2,000 Users) $3,106.00 $3,208.00 G1- PK8977 ET x Lever Design Proximity and Keypad Mortise Exit Device with Cylinder Override (2,000 Users) $3,166.00 $3,269.00

LK8978 ET x Lever Design Keypad Mortise Exit Device without Cylinder override (100 Users) $2,260.00 $2,362.00 G1- LU8978 ET x Lever Design Keypad Mortise Exit Device without Cylinder override (2,000 Users) $2,657.00 $2,759.00 G1- PA8978 ET x Lever Design * Proximity ONLY Mortise Exit Device without Cylinder Override (2,000 Users) $3,054.00 $3,156.00 G1- PK8978 ET x Lever Design Proximity and Keypad Mortise Exit Device without Cylinder Override (2,000 Users)$3,115.00 $3,217.00 *Requires SofLink Plus for programming.

8800 Profile Series with RF Technology – Rim Exit Device 3, 4, 9,10BL Function Function Description 10, 10B, 32D 15, 20D, 32G1- TU8877 ET x Lever Design RF Actuation Keypad w/Cylinder Override (2,000 Users) $2,822.00 $2,922.00 G1- TA8877 ET x Lever Design * RF Actuation Proximity w/Cylinder Override (2,000 users) $3,219.00 $3,321.00 G1- TP8877 ET x Lever Design RF Actuation Proximity & Keypad w/Cylinder Override (2,000 users) $3,278.00 $3,380.00 G1- TU8878 ET x Lever Design RF Actuation Keypad w/o Cylinder Override (2,000 Users) $2,771.00 $2,871.00 G1- TA8878 ET x Lever Design * RF Actuation Proximity w/o Cylinder Override (2,000 users) $3,168.00 $3,270.00 G1- TP8878 ET x Lever Design RF Actuation Proximity & Keypad w/o Cylinder Override (2,000 users) $3,228.00 $3,329.00

8900 Profile Series with RF Technology – Mortise Exit Device 3, 4, 9,10BL Function Function Description 10, 10B, 32D 15, 20D, 32G1- TU8977 ET x Lever Design RF Actuation Keypad w/Cylinder Override (2,000 Users) $3,034.00 $3,136.00 G1- TA8977 ET x Lever Design * RF Actuation Proximity w/Cylinder Override (2,000 users) $3,432.00 $3,533.00 G1- TP8977 ET x Lever Design RF Actuation Proximity & Keypad w/Cylinder Override (2,000 users) $3,491.00 $3,593.00 G1- TU8978 ET x Lever Design RF Actuation Keypad w/o Cylinder Override (2,000 Users) $2,981.00 $3,085.00 G1- TA8978 ET x Lever Design * RF Actuation Proximity w/o Cylinder Override (2,000 users) $3,379.00 $3,481.00 G1- TP8978 ET x Lever Design RF Actuation Proximity & Keypad w/o Cylinder Override (2,000 users) $3,438.00 $3,542.00

NOTE: RF fob must ordered separately from exits.PDA required for programming using Soflink Plus™ with Soflink PDP™

Lever Designs: A, B, E, F, J, L, P, WEscutcheons: ET



Lever Designs: A, B, E, F, J, L, P, WEscutcheons: ET





PS-10PROFILE SERIES

STAND ALONE PRODUCTS ACCESSORIES

BioFob - Wireless Biometric Security Device - hand-held biometric finger print readerCatalog # Description Price

BFES Enrollment Station Software Package - Includes enrollment software CD and Bluetooth Adaptor w/Software - required to enroll BioFob $602.00

BF1 BioFob HID Coded - 26 Bit Format, Site Code 20, Prox ID controlled by Sargent $362.00 BF2 BioFob HID Coded - 26 Bit Format, customer requested site code & Prox ID $362.00 BF3 BioFob Indala Coded - 26 Bit Format, customer requested site Code & Prox ID $362.00 BF4 BioFob Uncoded - Requires coding from HID or Indala Device Configuration

Module(BF7, BF8, BF9, or BF10) $362.00

BioFob's with other Bit Formats Consult Factory

BF7 Device Configuration Module with 25 HID Proximity ID's $200.00 BF8 Device Configuration Module with 100 HID Proximity ID's $807.00 BF9 Device Configuration Module with 25 Indala Proximity ID's $200.00 BF10 Device Configuration Module with 100 Indala Proximity ID's $807.00

BF6 Compliant Bluetooth Adaptor w/Software - replacement part $198.00

PCH-L70 PCH-B70 PF

ProxCard II and ProxKey II Cards/Fobs Price

PCH-L30 HID ISO ProxCard II™ - w/SARGENT logo - 26-Bit Format - .031 thick - Minimum order 25 each $12.67 eachPCH-B30 HID ISO ProxCard II™ - Blank white card - 26-Bit Format - .031 thick - Minimum order 25 each $12.67 eachPCH-L70 HID ProxCard II™ - w/SARGENT logo - 26-Bit Format - .070 thick - Minimum order 25 each $6.35 eachPCH-B70 HID ProxCard II™ - Blank white card - 26-Bit Format - .070 thick - Minimum order 25 each $6.35 eachPF ProxCard II™ - FOB - Minimum order 25 each $10.05 eachPF-C* ProxCard II™ - FOB - Custom - customer requested site code or range of fob numbers

- Minimum order 100 Consult Factory52-2551 RF FOB (TU/TP/TA) $81.87 eachOther cards/fobs available:Multiple Technology Proximity (DuoProx™) combines proximity technology and magnetic stripe technology.Custom cards or fobs with unique site codes for higher level of security*Note: - HID technology allows SofLink™ Plus TEKControl™ Software to read other formats provided "site code" is known.

- For a higher level of security, customer cards or fobs w/unique site codes are available - consult factory- ProxCard II and ProxKey II are trademarks of HID Corporation

Micro Prox Tag for Profile Series Proximity Access Control Products Price

MPT MicroProx™ Tag with SARGENT site code - Minimum order 25 each $6.32 eachMPT-C MicroProx™ Tag with SARGENT site code Consult Factory

Accessories Price

ES-G1 Enrollment Station $543.00 CD-SLP5 SofLink Plus 5.0 with SofLink PDP 4.0 software kit (includes CD and printed software manual) $254.00

*Net/Net Price

PDA-Z21 Palm Zire Z21 PDA - 8mb memory $87.00 PDA-Z31 Palm Zire Z31 PDA - 16mb memory $168.00 *Note: Prices are net/net prices and not list prices. Discounts do not apply.

Qty 1 each = 1 card or Fob – must be ordered in multiples of 25.

BioFob Configuration Module


PS-11PROFILE SERIES

STAND ALONE PRODUCTS ACCESSORIES PARTS

Additional AccessoriesPart # Description Price3267 Power Supply (9VDC) w/Wall Plug-In Transformer and Box $350.004293 Wall Prox-Keypad/Card Reader Assy. 867.0010-0469 Weatherseal Gasket - 10L 14.6168-1400 Weatherseal Gasket - 88/8900 10.5282-0500 Weatherseal Gasket - 8200 19.5452-0033 Fire Stop 17.3752-0034 Print Paper (6 rolls) for Infrared Portable Printer 79.3652-0069 Battery Cover Only – KP 10.5552-0170 Profile Set Battery Cover without RF Tech. 10.5552-0253 Battery Keeper 4.3052-0254 Weatherseal Gasket 5.1152-0255 Remote Power - Wall Plug-In Transformer - for replacement 43.3952-0256 Remote Power - 12V Gel Cell Battery - Option 49.6052-0258 Remote Power - Cable, Power Supply to Power Transformer - for replacement 42.1552-0344 RF Tech Battery Keeper 26.0452-2065 Auxiliary Power Unit 804.1652-2069 Infrared Portable Printer 510.4252-2071 Remote Unlocking Wire Harness 45.8852-2299 Keypad Only 151.6852-2340 Outside Escutcheon & Keypad 340.6852-2393 Controller Computer Cable Kit - required for SofLink PlusTM w/SofLink PDPTM 28.8952-2400 KP10G77 Controller Replacement Kit 300.9652-2401 KP8200 Controller Replacement Kit 300.9652-2418 24 Conductor Ribbon Cable 26.0452-2431 Proximity Assembly - PA 97.5152-2432 Keypad/Proximity Circuit Brd & Harness Assy (LK) (10L, 8200, 88/8900) 158.9052-2436 Profile Series Battery holder assy. 10.4852-2439 100(LK) User Keypad Controller Assy (10L) 325.0352-2440 100(LK) User Keypad Controller Assy (8200) 325.0352-2441 100(LK) User Keypad Controller Assy (88/8900) 325.0352-2498 Remote Power - 9VDC Power Supply PCB - for replacement 316.6152-2500 Remote Power - Remote Unlocking/Hard Power Harness Connection 45.8852-2509 RF Tech Battery Cover 13.6452-2556 Motor & Housing Assy. For use w/motorized Mortise Lock & Motorized ET 219.0952-2561 KP88/8900 Controller Replacement Kit 300.9652-2562 Ribbon Cable Assy; 20 Conductor 26.0452-2593 Keypad Shroud Pack 52.0752-2704 Keypad/Proximity Circuit Board & Harness Assy. (G1-LU, G1-PK, G1-TU, G1-TP) 379.2052-2706 Keypad/Proximity Circuit Board & Harness Assy. (G1-PA, G1-TA) 316.6152-2733 2,000 (G1-LU) User Keypad Controller Assy (10L) 541.7252-2734 2,000 (G1-PA, G1-PK) User Keypad Controller Assy. (10L) 842.6752-2735 2,000 (G1-TU) User Keypad Controller – 10L 722.2952-2736 2,000 (G1-TA, G1-TP) User Keypad Controller – 10L 1,023.2552-2783 2,000 (G1-LU) User Keypad Controller Assy (8200 & 88/8900) 541.7252-2784 2,000 (G1-PA, G1-PK) User Keypad Controller Assy (8200 & 88/8900) 842.6752-2785 2,000 (G1-TU) User Keypad Controller – 8200 & 88/8900 722.2952-2786 2,000 (G1-TA, G1-TP) User Keypad Controller – 8200 & 88/8900 1,023.2552-2847 Conduit (For Weather Protection) 10.2252-3409 Forced/Propped Door Harness 18.05

* Specify finish required when ordering.



PS-12PROFILE SERIES

10-LINE STAND ALONE PRODUCTS PARTS

Part # Description Price* 547 Retrofit Kit to cover Unican Prep 74.00* 800 Strike (Standard) refer to BL-52* 808 Strike (28 Prefix) refer to BL-52* VAC10 Cylinder - Sargent V10 VA Prefix refer to V-10 Cylinder Section* VSC10 Cylinder - Sargent V10 VS Prefix refer to V-10 Cylinder Section

01-0297 1/8" Security Socket Screw Key 11.3401-0803 Battery Alkaline (C-cell) 4.5701-0898 “AA” Batteries 2.0110-0019 Cylinder Spacer (Sargent Standard Cylinder & SC, SE Prefix) 0.5210-0312 Cylinder Retainer (required for lever - standard) - plastic 1.3210-0313 Cylinder Retainer (for interchangeable core, Removable core, & KESO core) - plastic 1.32

* 10-0501 Inside Lever "L" Design - Regular 59.89* 10-0502 Outside Lever "L" Design - Sargent Standard Cylinder 59.89* 10-0503 Outside Lever "L" Design - 30 Prefix 59.89* 10-0523 Inside Lever "B" Design - Regular 59.89* 10-0524 Outside Lever "B" Design - Sargent Standard Cylinder 59.89* 10-0525 Outside Lever "B" Design - 30 Prefix 59.89* 10-0545 Inside Lever "P" Design - Regular and 30 Prefix 59.89* 10-0546 Outside Lever "P" Design - Sargent Standard Cylinder 59.89* 10-0547 Outside Lever "P" Design - 30 Prefix 59.89* 10-0790 Inside and outside Rose Scalp - 26D/10B - G Rose 52.58* 10-0790 Inside and outside Rose Scalp - 3, 4, 9, 10, 10BL, 20D, 26 - G Rose 71.60* 10-0798 Inside and outside Rose Scalp - 26D/10B - L Rose 37.98* 10-0798 Inside and outside Rose Scalp - 3, 4, 9, 10, 10BL, 20D, 26 - L Rose 56.98* 10-2000 2 3/4" Backset Latch (Standard, Guarded) 50.47* 10-2052 Screw Pack 3.98* 10-2053 3 3/4" Backset Latch (23 Prefix) 61.08* 10-2058 5" Backset Latch (25 Prefix) 66.40* 10-2204 Inside Lever "J" Design - Regular and 30 Prefix 59.89* 10-2205 Outside Lever "J" Design - Sargent Standard Cylinder 59.89* 10-2206 Outside Lever "J" Design - 30 Prefix 59.89* 10-2634 3/4" Throw (41 Prefix) latch 111.56

10-2642 77 Lockbody (Std, 10, 21, 23, 30, SC, SE, VA, VS Cylinders) 277.1110-2643 77 Lockbody (60, 63, 64 cylinders) 277.1110-2644 77 Lockbody (70, 72, 65-73, 65-73-7P Prefixes Only) 277.11

* 10-2875 Inside Escutcheon Assy – KP 561.52* 10-3015 I/S Esc. Housing Only (Profile Ser.) 258.15* 10-3016 O/S Esc. Housing Only (Profile Ser.) 258.15* 10-3020 I/S Esc. & 100 User Controller – LK 585.82* 10-3026 O/S Esc. – for Keypad, Keypad/Prox (LK) 402.30

10-3048 Inside Rose Spring Assy. 65.7610-3049 Outside Rose Spring Assy. 90.58

* 10-3126 I/S Esc. & 2,000 User Controller – G1-LU 804.60* 10-3127 I/S Esc. & Keypad/Prox or Prox Only Controller – G1-PA, G1-PK 1,108.44* 10-3128 I/S Esc. & 2,000 User Controller – G1-TU 986.90* 10-3129 I/S Esc. & Keypad/Prox or Prox Only Controller (G1-TA, G1-TP) 1,290.75* 10-3130 O/S Esc. – For Keypad/Prox (G1-LU, G1-PK, G1-TU, G1-TP) 637.19* 10-3131 O/S Esc. – for Prox. Only (G1-PA, G1-TA) 577.31

45-1340 Flat Head Screw (Security) 2.81* 52-2300 Screw Pack 23.56




PS-13PROFILE SERIES

8200 STAND ALONE PRODUCTS TRIM/PARTS

8200 - Keypad(KP) PriceNumber Rose 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D695LN LN Rose

refer to ML-65695L L Rose8200 - Keypad(KP) & Profile Series Inside Levers PriceNumber Design 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

81-0467 A-LH81-0468 A-RH81-0490 B81-0470 E refer to ML-5981-0471 F81-0447 J81-0489 L81-0513 P81-0445 W8200 - Keypad & Profile Series Outside Levers PriceNumber Design 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D

82-0151 A-LH82-0152 A-RH82-0153 B82-0154 E82-0155 F refer to ML-5882-0156 J82-0157 L82-0158 P82-0159 W8200 - Keypad(KP) Outside Lever Trim SetNumber Rose Designs Lever Designs 4, 26D 10, 10B 3, 9, 15, 26 10BL, 20D

OS-8276, OS-8277 LN, L A*, E, F, W $196.00 $198.00 $205.00 $213.00 OS-8278, OS-8279 LN, L B, L, P $187.00 $189.00 $197.00 $202.00

J $158.00 $162.00 $168.00 $173.00 * Specify finish when ordering

Part # Description Price* 1KB Cylinder Rosette (for Size 41 Cylinder) 10.84* 1KB-3 Cylinder Rosette (for Size 42 Cylinder) 10.84* 90 1/4 Cylinder Ring (for Size 41 Cylinder) 5.24* 90 3/8 Cylinder Ring (for Size 42 Cylinder) 5.24

01-0079 Washer 0.7001-0297 1/8" Security Socket Screw Key 11.3401-0440 Flat Washer 0.5501-0543 Spring Grip Fastener (thumbturn) 1.2401-0803 Battery Alkaline ("C" Cell) 4.5701-0844 Washer (thumbturn) 0.5101-0898 Battery Alkaline ("AA" cell) 2.01

* 01-1019 Lockbody Screws for Metal #12-24 x 1/2" FL HD 0.59* 01-1028 Outside Front #8-32 x 1/4" FL HD Screw 0.60* 01-1119 #8-32 x 1 1/2" Flat Head Screw 1.16

01-1157 #8-32 x 1 1/4" Phillips Pan Head Screw 0.2601-1174 Lever Handle Screw - B, J, L, P, & W Levers 2.2501-1212 Security Screw 0.9001-1472 Lever Handle Screw -A, E, & F Levers 2.2501-1495 #8-32 x 5/8" Machine Screw 0.7001-1500 Fire Stop Screws #8 x 1/2" Type "AB" Ph Pn Hd Self Tap 0.2801-2299 Lockbody Screws for Wood #12 x 1 1/4" FL HD 0.28

* 01-4388 #8-1" Phillips Flat Head Screw 0.9013-0140 Compression Spring 1.4845-1340 Flat Head Screw (Security) 2.8152-0159 Cover Plate for ILCO Prep 75.1552-2057 Screw Pack 34.7252-3412 Harness (mates to Dorm Room Controller) 24.0852-3413 Dorm Room Mortise Controller Assembly (PA/PK) 842.00




PS-14PROFILE SERIES

8200 STAND ALONE PRODUCTS TRIM/PARTS


77-0168 Thrubolts #8-32 x 1 7/8" Flat Head Screw 1.3177-0772 Spindle (thumbturn) 6.26

* 77-4236 Screw Pack 4.5281-0723 Post 1.54

* 82-0081 Outside Front - 78 & 79 functions 38.95* 82-0084 Outside Front - 76 & 77 functions 38.95

82-0184 Cap Nut 5.7482-0347 I/S Spring / O/S Spring (part # for 1 spring) 0.7082-0368 I/S Spindle / O/S Spindle (part # for 1 spindle) 7.53

* 82-0492 I/S Esc. Housing Only without Thumbturn 263.07* 82-0493 O/S Esc. Housing Only without cylinder hole 263.07* 82-0494 I/S Esc. Housing Only w/Thumbturn 263.07* 82-0495 O/S Esc. Housing Only with cylinder hole 263.07

82-0507 Thumbturn 25.5582-3082 Plate Assy 7.53

* 82-3088 Inside Adapter & Plate Assy 20.50* 82-3729 Inside Escutcheon & Plug Assy (KP8278/KP8279) 575.93* 82-3730 Inside Escutcheon & Turn Lever Assy (KP8276/KP8277) 575.93

82-3732 Lockbody Assy w/deadbolt (8276/8277) 408.7382-3733 Lockbody Assy w/o deadbolt (8278/8279) 408.73

* 82-3837 I/S Esc. with Thumbturn and 100 user Controller (LK) 596.98* 82-3838 I/S Esc. without Thumbturn and 100 user Controller (LK) 596.98* 82-3846 O/S Esc. with Cyl. Hole & Keypad (LK) 409.96* 82-3847 O/S Esc. without Cyl. Hole & Keypad (LK) 409.96* 82-4182 I/S Esc. with Thumbturn and 2,000 user Controller (G1-LU) 819.93* 82-4183 I/S Esc. without Thumbturn and 2,000 user Controller (G1-LU) 819.93* 82-4184 I/S Esc. with Thumbturn Prox/Keypad Controller (G1-PA, G1-PK) 1,129.55* 82-4185 I/S Esc. without Thumbturn Prox/Keypad Controller (G1-PA, G1-PK) 1,129.55* 82-4186 I/S Esc. with Thumbturn & 2,000 User Controller (G1-TU) 1,005.70* 82-4187 I/S Esc. without Thumbturn & 2,000 User Controller (G1-TU) 1,005.70* 82-4188 I/S Esc. with Thumbturn & Keypad/Prox or Prox Only Controller (G1-TA, G1-TP) 1,315.34* 82-4189 I/S Esc. without Thumbturn & Keypad/Prox or Prox Only Controller (G1-TA, G1-TP) 1,315.34* 82-4190 O/S with Cyl. Hole Keypad/Prox (G1-LU, G1-PK, G1-TU, G1-TP) 652.70* 82-4191 O/S without Cyl. Hole Keypad/Prox (G1-LU, G1-PK, G1-TU, G1-TP) 708.45* 82-4192 O/S Esc. with Cyl. Hole & Prox Only (G1-PA, G1-TA) 588.31* 82-4193 O/S Esc. without Cyl. Hole & Prox Only (G1-PA, G1-TA) 588.31

82-4591 Dorm Room Mortise Lockbody 408.73




PS-15PROFILE SERIES

8800/8900 STAND ALONEPRODUCTS TRIM/PARTS

88/89 - Keypad(KP) & Profile Series ET Trim Set 3, 4, 9, 10, 10B,Number Lever Designs Exit Function 10BL, 15, 20D, 26, 26D777 ET x Lever Design A, B, E, F, J, L, P, W 8977778 ET x Lever Design A, B, E, F, J, L, P, W 8978

$549.00 777-8 ET x Lever Design A, B, E, F, J, L, P, W 8877778-8 ET x Lever Design A, B, E, F, J, L, P, W 8878

8900 - Keypad(KP) & Profile Series Mortise Lockbodies 3, 4, 9, 10, 10B,Number Exit Function 10BL, 15, 20D, 26, 26D977 8977

$446.00 978 8978

88/89 - Keypad Upgrade Kits to Convert to Profile Series 3, 4, 9, 10BL,Number Kit Type Description 10, 10B, 26D 15, 20D, 26231LK 1-Pack Keypad w/Cyl. Override (100 users) $553.00 $595.00 231G1LU 1-Pack Keypad w/Cyl. Override (2,000 users) $902.00 $943.00 231G1PA 1-Pack Prox Only w/Cyl. Override (2,000 Users) $1,251.00 $1,293.00 231G1PK 1-Pack Keypad & Prox w/Cyl. Override (2,000 Users) $1,300.00 $1,342.00

88/89 - Keypad Upgrade Kits to Convert to Profile Series 3, 4, 9, 10BL,Number Kit Type Description 10, 10B, 26D 15, 20D, 26

233LK 3-Pack Keypad w/Cyl. Override (100 users) $1,482.00 $1,607.00 233G1LU 3-Pack Keypad w/Cyl. Override (2,000 users) $2,528.00 $2,654.00 233G1PA 3-Pack Prox Only w/Cyl. Override (2,000 Users) $3,577.00 $3,701.00 233G1PK 3-Pack Keypad & Prox w/Cyl. Override (2,000 Users) $3,721.00 $3,846.00

88/89 - Keypad Upgrade Kits to Convert to Profile Series 3, 4, 9, 10BL,Number Kit Type Description 10, 10B, 26D 15, 20D, 26231G1TU 1-Pack Keypad w/Cyl. Override (2,000 users) $1,228.00 $1,270.00 231G1TA 1-Pack Prox Only w/Cyl. Override (2,000 users) $1,578.00 $1,618.00 231G1TP 1-Pack Keypad & Prox w/Cyl. Override (2,000 Users) $1,627.00 $1,667.00

88/89 - Keypad Upgrade Kits to Convert to Profile Series 3, 4, 9, 10BL,Number Kit Type Description 10, 10B, 26D 15, 20D, 26

233G1TU 3-Pack Keypad w/Cyl. Override (2,000 users) $3,504.00 $3,631.00 233G1TA 3-Pack Prox Only w/Cyl. Override (2,000 users) $4,551.00 $4,677.00 233G1TP 3-Pack Keypad & Prox w/Cyl. Override (2,000 Users) $4,696.00 $4,820.00

Note: For Coastal Series Levers – C, G, R, S, Y add $133.00 to above prices.

For Studio Collection, Metro Elements Levers - MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP, MQ, MR, MS, MT, MU,MV, MW – add $133.00 to above prices.


PS-16PROFILE SERIES

8800/8900 STAND ALONE PRODUCTS TRIM/PARTS




649 12-8800 Strike 60.53734 734ET Keypad Motor Assy Kit 128.00908 8900 Strike 25.76C908 12-8900 Strike – Specify hand when ordering 25.7601-0297 1/8" Security Socket Screw Key 11.3401-0898 Battery Alkaline ("AA" Cell) 2.01

* 01-1119 #8-32 x 1-1/2" Flat Head Machine Screw 1.1601-1212 Security Screws 0.9001-1500 Fire Stop Screws #8 x 1/2" Type "AB" PH Pn Hd Self Tap 0.2801-4451 Chassis Thru Bolts - 1/4-20 x 2-3/8" Flat Head Machine Screws 1.2413-0074 #12-24 x 2-1/8" Flat Head Machine Screw 0.4845-1340 Flat Head Screw (Security) 2.8152-0086 Inside Mounting Bracket 2.60

* 52-0087 KP-88/8900 I/S Esc 163.7252-0175 Inside Escutcheon End Cap 2.8252-0176 Outside Escutcheon End Cap 2.8252-0263 ET Trim Weather Seal Gasket 8.9352-2022 Tool Pack for 8977 39.6852-2211 Tool Pack for 8978 39.68

* 52-2302 Inside Escutcheon/Controller Assy – KP 559.7852-2303 Screw Pack 33.4852-2425 Screw Pack 20.4652-2460 Inside Escutcheon Assy. & 100 User Controller (LK) 580.2452-2474 Outside Escutcheon Assy. (Keypad -LK) 398.47

* 52-2833 Inside Escutcheon Assy. & 2,000 User Controller (G1-LU) 796.92* 52-2834 Inside Escutcheon Assy. & 2,000 User Controller (G1-PA, G1-PK) 1,097.88* 52-2835 Inside Escutcheon Assy. & Keypad/Prox or Prox Only 2,000 User Controller (G1-TA, G1-TP) 1,278.45* 52-2836 Inside Escutcheon Assy. & 2,000 User Controller (G1-TU) 977.50* 52-2838 Outside Escutcheon Assy. (Keypad/Prox –G1-LU, G1-PK, G1-TU, G1-TP) 634.41* 52-2839 Outside Escutcheon Assy. (Keypad – Prox Only – G1-PA, G1-TA) 571.81* 68-0406 8800 Chassis Cover 162.38* 68-0407 8900 Chassis Cover 162.38

68-1396 Inside Escutcheon Housing ONLY 263.1168-1397 Outside Escutcheon Housing ONLY 263.1168-2172 Chassis Assy LHRB (12-) 8900 388.0268-2173 Chassis Assy RHRB (12-) 8900 388.0268-4261 Chassis Assy LHRB/RHRB – 8800 518.7068-4263 Chassis Assy LHRB/RHRB – 12-8800 608.9077-0685 Escutcheon Thru Bolts 5.63


PS-17PROFILE SERIES

v.N1 OPEN ARCHITECTURE WIEGAND™ INTERFACE


How to Order

Step Description ExampleBored

Quantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 10-Product Series 10L Profile Series 10 Ea. 10-10Function 10G270 10 Ea. 10-10G270Technology/Trim Consult catalog for available technology and lever designs 10 Ea. 10-N1-10G270 PKLFinish Consult catalog for available finishes 10 Ea. 10-N1-10G270 PKL 26DMortiseQuantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 10-Product Series 8200 Profile Series 10 Ea. 10-82Function Consult catalog for available functions 10 Ea. 10-82270Technology/Trim Consult catalog for technology and available lever designs 10 Ea. 10-N1-82270 PKLFinish Consult catalog for available finishes 10 Ea. 10-N1-82270 PKL 26DHand Specify Hand 10 Ea. 10-N1-82270 PKL 26D RHExitQuantity Each 10 Ea.Prefix Consult catalog for prefixes available 10 Ea. 12-Technology LU 10 Ea. 12-N1-PKProduct Series 80 Series Profile Series 10 Ea. 12-N1-PK-88Function Consult catalog for available functions 10 Ea. 12-N1-PK-8875Trim - ET Consult catalog for available lever designs 10 Ea. 12-N1-PK-8875 ETLFinish (Trim/ET) Consult catalog for available finishes 10 Ea. 12-N1-PK-8875 ETL 26D/32DHand Specify Hand 10 Ea. 12-N1-PK-8875 ETL 26D/32D RHRDoor Size Specify Door width 10 Ea. 12-N1-PK-8875 ETL 26D/32D RHR x 36"TechnologyCatalog # DescriptionN1-PA Profile Series - Prox only N1-PK Profile Series - Prox & Keypad

FunctionCatalog # DescriptionBored Lock

10G270 Entry Lock with cylinder override - Fail Safe10G271 Entry Lock with cylinder override - Fail Secure

Mortise Lock82270 Entry Lock with cylinder override - Fail Safe82271 Entry Lock with cylinder override - Fail Secure82280 Entry Lock with cylinder override, deadbolt - Fail Safe82281 Entry Lock with cylinder override, deadbolt - Fail Secure82272 Security Lock with cylinder override - Fail Safe82273 Security Lock with cylinder override - Fail Secure82282 Security Lock with cylinder override, deadbolt - Fail Safe82283 Security Lock with cylinder override, deadbolt - Fail Secure

80 Series Exit - Rim8875 with cylinder override8876 without cylinder override

80 Series Exit - Mortise8975 with cylinder override8976 without cylinder override

FinishSARGENT Description ANSIUS3 Polished brass 605US4 Satin brass 606US9 Polished bronze 611US10 Satin bronze, clear powder coat 612US10B Oxidized satin bronze oil rubbed 613US10BL Oxidized satin bronze, clear powder coat —US15 Satin nickel, clear coated 619US20D Dark statuary bronze, clear powder coat —US26 Polished chrome 625US26D Satin chrome 626US32 Polished stainless steel 629US32D Satin stainless steel 630Note: Refer to each price page for available finishes by

product series.


PS-18PROFILE SERIES

v.N1 10-LINE CYLINDRICAL LOCK PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE




10 SARGENT Signature Key System $34.00 /cyl

11 SARGENT XC Key System (not used w/10, 60, 63, 64,SC,SE,V-10 prefixes) No Add

1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No Add



21 SARGENT Construction Key System (lost ball) - for new systems est. since 5/1/96 $10.00 /cyl

22 SARGENT Construction Key System (split key) - for pre-est. split key systems only $10.00 /cyl

23 Lockset x 3 3/4" Backset $8.00

25 Lockset x 5" Backset $12.00

28 Lockset x ANSI A115.2-1971 Strike #808: - Lip lengths 1-1/8", 1-1/4" or 1-3/8" No addition - Lip Lengths 1-5/8" to 2-7/8" in 1/4" increments $10.00

30 10 Line Lever to accept Schlage cylinder (no cylinder provided) No addition

36 6 Lobe head security screws $12.00

37 Spanner head security screws $8.00

41 3/4" throw with latch $48.00

60 SARGENT Removable disposable construction core No Add

63 SARGENT Removable core cylinder - includes MK and GMK charges $44.00 /cyl.

64 SARGENT Removable construction core cylinder See page CK-2

6573 Small Format 6-Pin uncombinated core (not avail. w/J Lever) - refer to CK-8 for keyways $31.00 /cyl.

65737P Small Format 7-Pin uncombinated core (not avail. w/J Lever) - refer to CK-8 for keyways $31.00 /cyl.

70 Small Format Interchangeable disposable plastic construction core (not avail. w/J Lever) No Add

72 Small Format Interchangeable 6-Pin construction core (not avail. w/J Lever)(7-Pin with 11 prefix) See Below

73 Small Format Interchangeable 6-Pin core (not avail. w/J Lever) $40.00 /cyl.

737P Small Format Interchangeable 7-Pin core (not avail. w/J Lever) $40.00 /cyl.

75* Handicap warning on inside lever $26.00

76* Handicap warning on outside lever $26.00

77* Handicap warning on both levers $52.00

80 Levers to accept KESO and KESO F1 - no cylinder provided (not avail. w/J Lever) No addition

82 SARGENT KESO Security Cylinder (not avail. w/J Lever) (for existing systems) $47.00 /cyl

F182 SARGENT KESO Security Cylinder - Patented - (not avail. w/J Lever) $47.00 /cyl

BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00 /cyl.

SC Schlage C Keyway cylinder, 0-bitted No addition

SE Schlage E Keyway cylinder, 0-bitted No addition

SG MicroShield™ an antimicrobial powder coat finish $21.00

VA SARGENT V-10 Standard cylinder See V-10 Cylinder Section

VS SARGENT V-10 Sub-Assembled cylinder See V-10 Cylinder Section

* Milled plastic backing on inside of lever handle.

PS-19PROFILE SERIES

v.N1 10-LINE CYLINDRICAL LOCK PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE



v.N1 10L Cylindrical Lock Profile Series 3, 9, 10BL,Function Trim - Proximity Entry Function Description 10B, 26D 4, 10, 26 15, 20D

N1-10G270-12V/N1-10G270-24V

PA(lever design) Fail Safe $1,588.00 $1,693.00 $1,749.00

N1-10G271-12V/

N1-10G271-24VPA(lever design) Fail Secure $1,588.00 $1,693.00 $1,749.00

Function Trim - Proximity/Keypad Entry Function Description

N1-10G270-12V/N1-10G270-24V

PK(lever design) Fail Safe $1,650.00 $1,753.00 $1,811.00

N1-10G271-12V/

N1-10G271-24VPK(lever design) Fail Secure $1,650.00 $1,753.00 $1,811.00

For Coastal Series Levers: Y&G – Add $59.00 to above prices.

10L-Profile Series v.N1Lever Designs: B, J, L, P

PS-20PROFILE SERIES

v.N1 8200 MORTISE LOCK PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE




3 Stainless Steel hub for institutional specifications (8200 only) $55.00


10UL SARGENT Signature Key System meeting UL437 (8200/80Ser.) $48.00 /cyl







23 4-7/8" ANSI Strike No addition

36 6 Lobe head security screws $19.00

37 Spanner head security screws $12.00




6573 Small Format 6-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.

65737P Small Format 7-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.

70 Small Format Interchangeable disposable plastic construction core No Add

72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 prefix) See Below

73 Small Format Interchangeable 6-Pin core $40.00 /cyl.

737P Small Format Interchangeable 7-Pin core $40.00 /cyl.

75 Handicap warning on inside lever $56.00

76 Handicap warning on outside lever $56.00

77 Handicap warning on both levers $112.00

81 Cylinder to accept KESO & KESO F1 removable core - no core provided No addition

82 SARGENT KESO Security Cylinder (for existing systems) $47.00 /cyl

F182 SARGENT KESO Security Cylinder - Patented $47.00 /cyl

83 SARGENT KESO Security Removable core cylinder (for existing systems) $67.00 /cyl

F183 SARGENT KESO Security Removable core cylinder - Patented $67.00 /cyl

84 SARGENT KESO Security removable construction core cylinder See CK-17

BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add No Match!/cyl.






VC SARGENT V-10 Interchangeable Core cylinder See V-10 Cylinder Section

VCVS SARGENT V-10 Interchangeable Core cylinder - Sub-Assembled See V-10 Cylinder Section

PS-21PROFILE SERIES

v.N1 8200 MORTISE LOCK PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE



8200 PROFILE SERIES v.N1Lever Designs: A, B, E, F, J, L, P, W

Specify 12v or 24v when ordering; Specify hand when ordering.

v.N1 8200 Mortise Lock Profile Series 10, 10B 3, 9,Function Trim - Proximity Entry Function Description 4, 26D 10BL, 20D 15, 26

N1-82270-12v/-24v PA(lever design) Fail Safe $1,746.00 $1,848.00 $1,904.00

N1-82271-12v/-24v PA(lever design) Fail Secure $1,746.00 $1,848.00 $1,904.00

N1-82280-12v/-24v PA(lever design) Fail Safe w/Deadbolt $1,770.00 $1,872.00 $1,928.00

N1-82281-12v/-24v PA(lever design) Fail Secure w/Deadbolt $1,770.00 $1,872.00 $1,928.00

N1-82272-12v/-24v PA(lever design) Fail Safe - Security Lock $1,805.00 $1,908.00 $1,966.00

N1-82273-12v/-24v PA(lever design) Fail Secure - Security Lock $1,805.00 $1,908.00 $1,966.00

N1-82282-12v/-24v PA(lever design) Fail Safe w/D.bolt - Security Lock $1,830.00 $1,931.00 $1,988.00

N1-82283-12v/-24v PA(lever design) Fail Secure w/D.bolt - Security Lock $1,830.00 $1,931.00 $1,988.00

Function Trim - Prox./K.pad Entry Function Description

N1-82270-12v/-24v PK(lever design) Fail Safe $1,805.00 $1,908.00 $1,966.00

N1-82271-12v/-24v PK(lever design) Fail Secure $1,805.00 $1,908.00 $1,966.00

N1-82280-12v/-24v PK(lever design) Fail Safe w/Deadbolt $1,830.00 $1,931.00 $1,988.00

N1-82281-12v/-24v PK(lever design) Fail Secure w/Deadbolt $1,830.00 $1,931.00 $1,988.00

N1-82272-12v/-24v PK(lever design) Fail Safe - Security Lock $1,867.00 $1,969.00 $2,025.00

N1-82273-12v/-24v PK(lever design) Fail Secure - Security Lock $1,867.00 $1,969.00 $2,025.00

N1-82282-12v/-24v PK(lever design) Fail Safe w/D.bolt - Security Lock $1,891.00 $1,993.00 $2,048.00

N1-82283-12v/-24v PK(lever design) Fail Secure w/D.bolt - Security Lock $1,891.00 $1,993.00 $2,048.00

For Coastal Series Levers: C, G, R, S, Y – Add $116.00 to above prices.

For Studio Collection, Metro Elements Levers - MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP, MQ, MR,MS, MT, MU, MV, MW – add $116.00 to above prices.

PS-22PROFILE SERIES

v.N1 80 SERIES EXIT DEVICE PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE





10UL SARGENT Signature Key System meeting UL437 $48.00 /cyl





12 UL Fire Label Exit Device $127.00

16 Cylinder Lockdown feature in rail $94.00

19 80 Series pushbar without Lexan Touchpad No addition



23 4-7/8" ANSI Strike No Add

36 6 Lobe head security screws (8800) $37.00

36 6 Lobe head security screws (8900) $41.00

37 Spanner head security screws (8800) $25.00

37 Spanner head security screws (8900) $27.00




6573 Small Format 6-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.

65737P Small Format 7-Pin uncombinated core - refer to CK-8 for keyways $31.00 /cyl.

70 Small Format Interchangeable disposable plastic construction core No Add

72 Small Format Interchangeable 6-Pin construction core (7-Pin with 11 prefix) See Below

73 Small Format Interchangeable 6-Pin core $40.00 /cyl.

737P Small Format Interchangeable 7-Pin core $40.00 /cyl.

75 Warning Inside - Abrasive strip on rail $71.00

76 Warning Outside - Milled outside lever $56.00

77 Warning Inside and Outside - Abrasive strip on rail, Milled outside Lever $127.00

81 Cylinder to accept KESO & KESO F1 removable core - no core provided No addition

82 SARGENT KESO Security Cylinder (for existing systems) $47.00 /cyl

F182 SARGENT KESO Security Cylinder - Patented $47.00 /cyl

83 SARGENT KESO Security Removable core cylinder (for existing systems) $67.00 /cyl

F183 SARGENT KESO Security Removable core cylinder - Patented $67.00 /cyl

84 SARGENT KESO Security removable construction core cylinder See CK-17

BR SARGENT Bump Resistant Cylinders (N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE, V-10 prefixes) Add $18.00/cyl.






VC SARGENT V-10 Interchangeable Core cylinder See V-10 Cylinder Section

VCVS SARGENT V-10 Interchangeable Core cylinder - Sub-Assembled See V-10 Cylinder Section

PS-23PROFILE SERIES

v.N1 80 SERIES EXIT DEVICE PROFILE SERIES OPEN ARCHITECTURE WIEGAND™ INTERFACE



v.N1 8800 Rim Exit Device Profile Series (2,000 Users) 10, 10B 3, 4, 9, 10BLFunction Trim - Proximity Entry Function Description 32D 15, 20D, 32

N1-PA8875 ET(lever design) Fail Safe – w/cylinder override $2,455.00 $2,508.00

N1-PA8876 ET(lever design) Fail Secure – w/cylinder override $2,455.00 $2,508.00


N1-PK8875 ET(lever design) Fail Safe – w/cylinder override $2,516.00 $2,569.00

N1-PK8876 ET(lever design) Fail Secure – w/cylinder override $2,516.00 $2,569.00

v.N1 8900 Mortise Exit Device Profile Series 10, 10B 3, 4, 9, 10BLFunction Trim - Proximity Entry Function Description 32D 15, 20D, 32

N1-PA8975 ET(lever design) Fail Safe – w/cylinder override $2,828.00 $2,905.00

N1-PA8976 ET(lever design) Fail Secure – w/cylinder override $2,828.00 $2,905.00


N1-PK8975 ET(lever design) Fail Safe – w/cylinder override $2,888.00 $2,965.00

N1-PK8976 ET(lever design) Fail Secure – w/cylinder override $2,888.00 $2,965.00

FOR COASTAL SERIES LEVERS: C, G, R, S, Y – Add $133.00 to above prices.

For Studio Collection, Metro Elements Levers - MA, MB, MC, MD, ME, MF, MG, MH, MI, MJ, MK, ML, MN, MM, MO, MP, MQ,MR, MS, MT, MU, MV, MW – add $133.00 to above prices.

8800/8900 EXIT PROFILE SERIES v.N1Lever Designs: A, B, E, F, J, L, P, WEscutcheons: ET

Specify 12v or 24v when ordering; Specify hand when ordering.

PS-24PROFILE SERIES

v.N1 PROFILE SERIESOPEN ARCHITECTURE WIEGAND™ INTERFACE



Interface Modules and Auxilary Relay Module – When ordered separately Utility Box not included Catalog # Description Price

IM2D One 2 door interface module $263.00 IM4D One 4 door interface module $323.00 RM4D Up to 4 Door monitoring - one 4 door interface module, Auxiliary relay module $636.00 Note: Auxiliary Relay Module required for use with Latchbolt (8200, 80 Series Exits), Deadbolt (8200) monitoring

Interface Module - Mounted in 12" x 12" Utility BoxCatalog # Description Price

UB2D-S Up to 2 Door monitoring - one 2 door interface module, Utility Box $342.00 UB4D-S Up to 4 Door monitoring - one 4 door interface module, Utility Box $402.00 Note: For use with 10L and non-Latchbolt (8200, 80Series), non-Deadbolt(8200) monitoring

Interface Module and Auxiliary Relay Module - Mounted in 12" x 12" Utility Box Catalog # Description Price

UB2D-SR Up to 2 Door monitoring - one 2 door interface module, Auxiliary relay module, Utility Box $655.00 UB4D-SR Up to 4 Door monitoring - one 4 door interface module, Auxiliary relay module, Utility Box $716.00 Note: For use with Latchbolt (8200, 80Series Exits), Deadbolt(8200) monitoring

Utility Box Options, when ordered with above:Suffix Description Add

ST Mounted in 12" x 12" utility box w/tamper switch (example: UB4D-ST-R) $76.00 L Mounted in 12" x 12" lockable utility box (example: UB4D-L-R) $32.00 LT Mounted in 12" x 12" lockable utility box w/tamper switch (example UB4D-LT-R) $109.00

v.N1 Keypads/ControllersCatalog # Description Price

52-2431 Keypad - Prox only bezel assy. w/Harness (PA) - 10L, 8200, 80Ser. $97.51 52-2432 Keypad - Prox/Keypad bezel assy. w/Harness (PK) - 10L, 8200, 80Ser. $158.90 52-3271 v.N1 Controller Assy. - 2000 User (PA/PK) - 10L, 8200, 80Ser. $481.59

v.N1 Proximity ReadersCatalog # Description Price

4302 125KHz Mullion-mount Proximity Reader $373.00 4303 125KHz Low Profile Proximity Reader $381.00 4304 125KHz New Generation Proximity Reader $388.00 4305 125KHz Keypad Proximity Reader $690.00 4306 125KHz Long Range Proximity Reader $1,134.00 4307 125KHz Proximity Reader $187.00 4308 125KHz Wall Mounted Proximity Reader with Keypad $482.00 4320 Glass Mount Kit(for use with 4304/4305) $26.00 v.N1 Misc. PartsCatalog # Description Price

52-2593 Protective Shroud $52.0752-2847 Conduit $10.22 10-0469 Weatherseal Gasketing - 10L Cylindrical Lock Escutcheon $14.61 52-0263 Weatherseal Gasketing - ET Trim $8.93 68-1400 Weatherseal Gasketing - 80Ser. Exit Escutcheon $10.52 82-0500 Weatherseal Gasketing - 8200 Mortise Lock Escutcheon $19.54

UB4D-L-R shown.

PS-25PROFILE SERIES

v.N1 PROFILE SERIES ACCESSORIES OPEN ARCHITECTURE WIEGAND™ INTERFACE



BioFob - Wireless Biometric Security Device - hand-held biometric finger print readerCatalog # Description Price

BFES Enrollment Station Software Package - Includes enrollment software CD and Bluetooth Adaptor w/Software - required to enroll BioFob $602.00

BF1 BioFob HID Coded - 26 Bit Format, Site Code 20, Prox ID controlled by Sargent $362.00 BF2 BioFob HID Coded - 26 Bit Format, customer requested site code & Prox ID $362.00 BF3 BioFob Indala Coded - 26 Bit Format, customer requested site Code & Prox ID $362.00 BF4 BioFob Uncoded - Requires coding from HID or Indala Device Configuration

Module(BF7, BF8, BF9, or BF10) $362.00

BioFob's with other Bit Formats Consult Factory

BF7 Device Configuration Module with 25 HID Proximity ID's $200.00 BF8 Device Configuration Module with 100 HID Proximity ID's $807.00 BF9 Device Configuration Module with 25 Indala Proximity ID's $200.00 BF10 Device Configuration Module with 100 Indala Proximity ID's $807.00

BF6 Compliant Bluetooth Adaptor w/Software - replacement part $198.00

PCH-L70 PCH-B70 PF

ProxCard II and ProxKey II Cards/Fobs Price

PCH-L30 HID ISO ProxCard II™ - w/SARGENT logo - 26-Bit Format - .031 thick - Minimum order 25 each $12.67 eachPCH-B30 HID ISO ProxCard II™ - Blank white card - 26-Bit Format - .031 thick - Minimum order 25 each $12.67 eachPCH-L70 HID ProxCard II™ - w/SARGENT logo - 26-Bit Format - .070 thick - Minimum order 25 each $6.35 eachPCH-B70 HID ProxCard II™ - Blank white card - 26-Bit Format - .070 thick - Minimum order 25 each $6.35 eachPF ProxCard II™ - FOB - Minimum order 25 each $10.05 eachPF-C* ProxCard II™ - FOB - Custom - customer requested site code or range of fob numbers

- Minimum order 100 Consult Factory

Other cards/fobs available:Multiple Technology Proximity (DuoProx™) combines proximity technology and magnetic stripe technology.Custom cards or fobs with unique site codes for higher level of security*Note: - HID technology allows SofLink™ Plus TEKControl™ Software to read other formats provided "site code" is known.

- For a higher level of security, customer cards or fobs w/unique site codes are available - consult factory- ProxCard II and ProxKey II are trademarks of HID Corporation

Micro Prox Tag for Profile Series Proximity Access Control Products Price

MPT MicroProx™ Tag with SARGENT site code - Minimum order 25 each $6.32 eachMPT-C MicroProx™ Tag with SARGENT site code Consult Factory

Qty 1 each = 1 card or Fob – must be ordered in multiples of 25.

BioFob Configuration Module

Documents

TOC and Checklist