Upload
khangminh22
View
1
Download
0
Embed Size (px)
Citation preview
www.ponsse.com
Copyright © 2014 Ponsse Plc. PONSSE is a registered trademark of Ponsse Plc and other product names are trademarks or trade names of Ponsse Plc.
Ser
vic
e c
ata
log
ue 2
01
5
A logger´s best friend
Service catalogue 2015
Ponsse PlcPonssentie 22FI-74200 VieremäFINLANDTel. +358 20 768 800Fax +358 20 768 8690
Ponsse North america, inc.4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse uK ltd.Unit 3, Broomhouses 1 Industrial EstateLockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202
243
Northern EuropePONSSE PLC FINLAND
EPEC OY FINLAND
PONSSE AB SWEDEN
PONSSE AS NORWAY
AN MASKINTEKNIK AB SWEDEN
KONEKESKO EESTI AS ESTONIA
SIA KONEKESKO LATVIJA LATVIA
UAB KONEKESKO LIETUVA LITHUANIA
Russia and AsiaPONSSE CHINA LTD. CHINA
OOO PONSSE RUSSIA
ODO UDArNIK BELARUS
OOO DOrMASHIMPOrT-VOSTOK RUSSIA
OOO LESPrOMSErVIS RUSSIA
OOO KOSTrOMA-SErVIS-PONSSE RUSSIA
OOO rEMTECHNICA RUSSIA
OOO PKF GIDrOSErVIS RUSSIA
OOO NOrD WEST-KOM rUSSIA
OOO ZEPPELIN rUSSLAND RUSSIA
OOO PArTS SErVIS RUSSIA
SHINGU SHOKO, LTD JAPAN
rANDALLS EQUIPMENT COMPANY AUSTRALIA
Dear reader,
You are reading the updated Ponsse Service 2015 catalogue.
We have expanded our product selection further. We have added new products to the catalogue and updated existing products. However, there are only a limited number of products offered by our ser-vice centres.
We hope that the catalogue is a useful tool for you for making purchases. We have also included products and tools that may not be found in the spare parts book delivered with your machine.
The catalogue is well worth having a look at regardless of the machine You are using. You may find products that You may not have known to be available from us – at our usual low prices. Please do not hesitate to contact us if You are not sure if You have the right product. Our parts specialists will certainly be able to help.
We have further developed our Service network to be able to effectively meet the needs of the expanding customer base and machine stock. Our Parts teams of experienced experts are at Your disposal.
We wish all our partners the best of success with future ventures!
Best regards,
Ponsse Global Service
PoNssE GlobAl sERvicE
32
Table of Contents
Product line .................................. 4
PONSSE Service ............................ 8
Basic Machine Products ................ 22
Tyres, Tracks, Chains .................... 63
Harvester Products ...................... 87
Crane Products ........................... 108
Hydraulic fittings ......................... 115
Central lubrication system parts .... 132
Electrical connectors ................... 138
Electric switches ......................... 146
Accessories ................................. 154
Chemicals ................................... 167
Stickers ...................................... 177
Reman (remanufactured) parts ..... 183
PONSSE Performance packages .... 188
PONSSE Collection ...................... 224
Notes ......................................... 240
PONSSE Global Service ................ 242
54
Power (kW)Crane pump (cm3) Harvester head pump (cm3)Measuring and control systemHarvester headsCrane Minimum weight (kg)Typical weight (kg) Tyres
240 (322 hp) 190 (11.6 cu in)190 (11.6 cu in)Opti4GH8C55 or C623,800 (52,470 lbs)24,500 (54,013 lbs)750/55-26.5 or 780/55-26.5
Power (kW)
Crane pump (cm3) Harvester head pump (cm3)Measuring and control systemHarvester headsCrane Minimum weight (kg)Typical weight (kg) Tyres
210 (286 hp) Europe, 205 (275 hp) other countries 145 (8.85 cu in)190 (11.6 cu in)Opti4GH5, H6, or H7C4, C5 or C44+19,000 (41,887 lbs)20,000 (44,092 lbs)Front: 600/65-34-, 710/55-34” Rear: 600/55-26.5-, 710/45-26.5-,800/40-26.5
Power (kW)
Crane pump (cm3) Harvester head pump (cm3)Measuring and control systemHarvester headsCrane Minimum weight (kg)Typical weight (kg) Tyres
210 (286 hp) Europe, 205 (275 hp) other countries 145 (8.85 cu in)190 (11.6 cu in)Opti4GH5, H6, or H7C4, C5 or C44+20,500 (45,194 lbs)21,500 (47,399 lbs)600/55-26.5-, 710/45-26.5-, 800/40-26.5
Power (kW)Working pump (cm3) Measuring and control systemHarvester headsCrane Minimum weight (kg)Typical weight (kg) Tyres
145 (197 hp) 190 (11,6cu in)Opti4GH5 or H6C44+ 17,700 (39,000 lbs)18,200 (40,100 lbs)600/55-26.5-, 710/45-26.5, 800/40-26,5
Power (kW)Crane and Harvester head pump (cm3)Measuring and control systemHarvester headsCrane Minimum weight (kg)Typical weight (kg)Tyres
150 (204 hp) 190 (11.6 cu in)Opti4GH5 or H6C2 or C44+15,500 (34,150 lbs)17,700 (39,000 lbs)600/55-26.5-, 710/45-26.5, 800/40-26,5
PONSSE Bear 8w
PONSSE Ergo 6w
PONSSE Ergo 8w
PONSSE Fox PONSSE Beaver
Harvesters
Power (kW)Working pump (cm3)
Measuring and control systemHarvester headsCrane Minimum weight (alkaen) (kg)
Typical weight (kg) Tyres
210 (286 hp) Scorpion 210 (ScorpionKing 190 and 145)Opti4GH5, H6 (ScorpionKing H7)C50 20,800 kg (ScorpionKing 21,300 kg)21,500 kg (ScorpionKing 22,000 kg)600/55-26,5, 710/45-26,5, 800/40-26,5
PONSSE Scorpion / ScorpionKing
54
Load carrying capacity (kg)Power (kW)
Tractive force (kN)CraneLoad space cross-section (m2)Ground clearance (mm)Minimum weightTypical weight (kg) Tyres
20,000 (44,093 lbs)210 (286 hp) Europe 205 (275 hp) other countries240 (53,954 lbf)K100+ M/S5.8–6.25 (62.4–67.3 sq ft)800 (31.5 in)22,900 (50,486 lbs) 23,700 (52,250 lbs) 750/55-26,5, 780/55-26.5
Load carrying capacity (kg)Power (kW)
Tractive force (kN)CraneLoad space cross-section (m2)Ground clearance (mm)Minimum weight 6w (kg)Minimum weight 8w (kg)Typical weight 6w (kg)Typical weight 8w (kg) Tyres
18,000 (39,683 lbs)210 (286 hp) Europe, 205 (275 hp) other countries220 (49,459 lbf)K100+ M/S5.8–6.25 (62.4–67.3 sq ft)800 (31.5 in)19,700 (43,450 lbs) 22,000 (48,500 lbs)20,600 (45,400 lbs)22,800 (50,250 lbs)Front (6w): 700/70-26,5, 750/65-34 Front and rear: 750/55-26,5, 780/55-26,5, 750/50-26.5
Load carrying capacity (kg)Power (kW)
Tractive force (kN)CraneLoad space cross-section (m2)Ground clearance (mm)Minimum weight 6w (kg)Minimum weight 8w (kg)Typical weight 6w (kg) Typical weight 8w (kg) Tyres
18,000 (39,683 lbs)210 (286 hp) Europe, 205 (275 hp) other countries 210 (47,210 lbf)K100+ M/S5.2–5.8 (56–63 sq ft)730 (29.12 in)19,200 (42,350 lbs)20,600 (45,400 lbs) 19,700 (40,786 lbs) 21,100 (46,500 lbs) Front (6w): 700/70-26.5, 750/65-34 Front and rear: 710/45-26.5, 750/55-26.5, 780/55-26.5, 800/40-26.5
Load carrying capacity (kg)Power (kW)
Tractive force (kN)CraneLoad space cross-section (m2)Cross-area of the VLA-load space (m2)Ground clearance (mm)Minimum weight 6w (kg)Minimum weight 8w (kg)Typical weight 6w (kg) Typical weight 8w (kg) Tyres
14,000 (30,865 lbs)210 (286 hp) Europe, 205 (275 hp) other countries 185 (41,589 lbf)K90+ M/S or K100+ M/S4.5–5.5 (48.4–59.2 sq ft)4.5–6.0 (48.4–64.6 sq ft)680 (26.8 in)16,800 (37,037 lbs)18,600 (41,005 lbs) 18,000 (39,683 lbs) 19,800 (43,651 lbs) Front (6w): 710/45-34 Front and rear: 710/45-26.5, 800/40-26.5
PONSSE ElephantKing
Forwarders
PONSSE Elephant
PONSSE BuffaloKing PONSSE Buffalo
PrOduct liNE
Load carrying capacity (kg)Power (kW)Tractive force (kN)CraneLoad space cross-section (m2)Cross-area of the VLA-load space (m2)
Ground clearance (mm)Minimum weight 6w (kg)Minimum weight 8w (kg)Typical weight 6w (kg) Typical weight 8w (kg) Tyres
13,000 (28,660 lbs)129 (173 hp) 175 (39,341 lbf)K70+ M/S or K90+ M/S4.5–5.0 (48.4–53.8 sq ft)4.5–6.0 (48.4–64.6 sq ft)670 (26.38 in)16,000 (35,273 lbs)17,500 (38,580 lbs) 17,100 (37,699 lbs) 18,600 (41,005 lbs) Front (6w): 600/65-26.5, 710/55–34 Front and rear: 600/55-26.5, 710/45-26.5, 800/40-26.5
Load carrying capacity (kg)Power (kW)Tractive force (kN)CraneLoad space cross-section (m2)Ground clearance (mm)Minimum weight 8w (kg)Typical weight 8w (kg) Tyres
12,000 (26,455 lbs)129 (173 hp) 165 (37,093 lbf)K70+ M/S4.0–4.5 (43.1–48.4 sq ft)645 (25.4 in)16,300 (35,935 lbs) 17,300 (38,140 lbs) Front (6w): 600/65-26.5, 710/55–34 Front and rear: 600/55-26.5, 710/45-26.5
PONSSE Elk PONSSE Wisent
76
Load carrying capacity (kg)Power (kW)Tractive force (kN)CraneLoad space cross-section (m2)Ground clearance (mm)Minimum weight (kg)Typical weight (kg)
Tyres
10,000 (22,046 lbs)129 (173 hp) 130 (29,225 lbf)K70+ M/S3.8 (40.9 sq ft)600 (23.62 in)13,400 (29,542 lbs)14,000 (30,865 lbs)
600/50-26.5, 710/40-26.5
Power (kW)
Harvester headLoad carrying capacity (kg)Tractive force (kN)CraneMeasuring and control systemMinimum weight (kg)Minimum weight (kg)Typical weight (kg)
Tyres
210 (286 hp) Europe, 205 (275 hp) other countriesH53e or H514,000 (30,865 lbs)185 (41,590 lbf)K90Dual+Opti4G20,700 (45,650 lbs) as a forwarder
19,600 (43,200 lbs) as a harvester
21,550 (47,500 lbs) Front (6w): 710/45-26.5, 800/40-26.5 Front and rear: 710/45-26.5, 800/40-26.5
Largest opening (feed rollers, mm)Cutting diameter, one pass (mm)Feed systemFeed power (kN)Feed rate (m/s) Starting weight(incl. Rotator and hanger, kg)
500 (19.7 in) 520/630 (20.5/24.8 in) 3 driving feed rollers18 (4,047 lbf) 0–4 (0–13 ft/s)
870 (1,918 lbs)
Largest opening (feed rollers, mm)Cutting diameter, one pass (mm)Feed systemFeed power (kN)Feed rate (m/s) Starting weight (incl. Rotator and hanger, kg)
600 (23.6 in) 640 (25.2 in) 3 driving feed rollers25 (5,620 lbf)0–5.5 (0–18.1 ft/s)
1,050 (2,315 lbs)
Largest opening (feed rollers, mm)Cutting diameter, one pass (mm)Feed systemFeed power (kN)Feed rate (m/s) Starting weight(incl. Rotator and hanger, kg)
530 (20.8 in) 560 (22.1 in) 3 driving feed rollers19 (4,271 lbf)0–5.5 (0–18.1 ft/s)
950 (2,094 lbs)
Largest opening (feed rollers, mm)Cutting diameter, one pass (mm)Feed systemFeed power (kN)Feed rate (m/s) Starting weight (incl. Rotator and hanger, kg)
630 (24.8 in) 640 (25.2 in)3 driving feed rollers25–30 (5,620–6,744 lbf) 0–5.8 (0–19 ft/s)
1,250 (2,760 lbs)
Largest opening (feed rollers, mm)
Cutting diameter, one pass (mm)
Feed systemFeed power (kN)Feed rate (m/s) Starting weight (incl. Rotator and hanger, kg)
650 (25.6 in) 720/800 (28.3/31.5 in)3 driving feed rollers30 (6,744 lbf) 0–5 (0–16.4 ft/s)
1,250 (2,756 lbs)
Largest opening (feed rollers, mm)Cutting diameter, one pass (mm)Feed systemFeed power (kN)Feed rate (m/s) Starting weight (incl. Rotator and hanger, kg)
740 (29.2 in) 720/800 (28.3/31.5 in)3 driving feed rollers36 (8,093 lbf) 0–5 (0–16.4 ft/s)
1,400 (3,086 lbs)
PONSSE Gazelle
Heads
PONSSE Buffalodual
PONSSE H53e PONSSE H5
PONSSE H6 PONSSE H7
PONSSE H7 euca PONSSE H8
Forwarders
76
Ponsse’s versatile harvester crane selection provides special power and extra reach for all conditions.
The PONSSE C2 and C5 cranes are delivered with external or internal hydraulic hoses. The PONSSE C6 is always delivered with internal hoses. At our customers’ request, the boom head has been devel-oped so that it allows the use of a multi-plate swing damper at the top of the pivot, which al-lows the harvester head to be used in a quicker and more con-trolled way.
PONSSE C2
Reach 10 m (32.8 ft.)Lifting moment 205 kNm
PONSSE C5
Reach 10 m (32.8 ft.)Lifting moment 248 kNm
PONSSE C6
Reach 10 m (32.8 ft.)Lifting moment 310 kNm
The flexible usability, lightness and excellent efficiency of the Ponsse parallel cranes guar-antee efficient and econom-ical performance. PONSSE C44+ represents the cutting-edge of this development. The easy controllability and stabil-ity brought about by the light structure increase the produc-tivity of the work, while the ef-ficient movements reduce fuel consumption. The PONSSE C44+, C50 and C55 parallel cranes expand harvesting pos-sibilities to cover all harvesting conditions more efficiently than ever before.
PONSSE C44+
Reach 10/11 m (32.8/36 ft.)Lifting moment 240 kNm
PONSSE C50
Reach 10/11 m (32.8/36 ft.)Lifting moment 252 kNm
PONSSE C55
Reach 9.5/11 m (31.2/36 ft.)Lifting moment 255 kNm
Lifting moment, gross (kNm)Slewing torque (kNm)Turning angleOperating pressure (bar)Reach, S/M (m)
Lifting moment, gross (kNm)Slewing torque (kNm)Turning angleOperating pressure (bar)Reach, S/M (m)
Lifting moment, gross (kNm)Slewing torque (kNm)Turning angleOperating pressure (bar)Reach, S/M (m)
Lifting moment, gross (kNm)Slewing torque (kNm)Turning angleOperating pressure (bar)Reach, S/M (m)
106 (78,181 lb-ft)24,5 (18,070 lb-ft) 360°235 (3,410 psi) 7.9/10 (25.9/32.8 ft)
140 (103,259 lb-ft)33 (24,340 lb-ft)360°265 (3,844 psi) 7.8/10.0 (25.6/32.8 ft)
160 (115,797 lb-ft)33 (24,340 lb-ft)360°265 (3,844 psi) 7.6/9.5 (24.9/31.2 ft)
160 (115,797 lb-ft) 33 (24,340 lb-ft) 360°265 (3,844 psi) 9 (29.5 ft) (PONSSE H5)/ 10 (32.8 ft) (PONSSE H53e)
loaders
PONSSE c2, c5 and c6 sliding boom cranes
PONSSE c44+, c50 and c55 parallel cranes
PONSSE K70+ PONSSE K90+
PONSSE K100+ K90duAl+
PrOduct liNE
Harvester cranes
98
The Logger’s best friend invites you to the Logger´s Inn to enjoy the best
services for forest machinery ever provided. Our services extend from
authorized maintenance and training, and genuine parts and accesso-
ries, up to tailormade service agreement solutions, ensuring that you
always gain 100% value from your friendship with Ponsse.
PONSSE Service
98
PARTSGenuine Parts • Accessories • Performance packages • Remanufactured parts • Budget Parts • Classic Parts
SERVICE AGREEMENTSLogger’s Total • Logger’s Total with additional security • Logger’s Back-up
TECHNICAL SUPPORTField Service • Telephone Support
OPERATOR TRAINING
DOCUMENTSOwner’s Manual - Parts Manuals
11
The PONSSE spare parts selection is specifically designed for the
needs of machine entrepreneurs. We offer an extensive selection
of high-quality parts: PONSSE Genuine Parts, Accessories, Per-
formance Packages, Reman Parts, Budget Parts and Classic Parts
guarantee that your forest machine works efficiently. The compe-
tent personnel at our Service Centres will assist you in selecting
the right alternative for your needs. In case of an emergency, our
Service Centres also offer telephone assistance.
SPARE PARTS
11
SPARE PARTS
One part, three options. Ponsse wants to offer alternatives that meet customers’ needs. Genuine Parts, Remanufactured Parts and Budget Parts.
PONSSE Genuine Parts • Original quality and reliability
• The best stock availability
PONSSE Remanufactured Parts • Based on recycling and reconditioning
• The same quality and warranty as with a new part
• A more affordable alternative to a genuine part
• A quicker alternative to the traditional repair of parts
• Environmentally friendly
PONSSE Budget Parts • The most affordable option
• Disused, second-hand or partially damaged parts
• The price is determined by the condition of the part
• No warranty
The best quality at a competitive price – PONSSE Accessories. PONSSE Accessories • The selection contains products that forest machine
entrepreneurs need in their daily work.
• Accessories, assortments and tools
• Carefully selected high-quality products
Ready-made solutions at affordable package prices – PONSSE Performance Packages.
PONSSE Performance Packages • Spare part sets and ready-made assemblies designed for vari-
ous needs
• An easy way to order new features and updates for machines
• The package price is a less expensive option to ordering the
parts separately
Not to forget the older generations of PONSSE products – PONSSE Classic Parts.
PONSSE Classic Parts • A wide selection of original parts for machine models that are
no longer in production
13
LET’S KEEP PONSSE IN
THE FORESTPONSSE SERVICE AGREEMENTS
Ponsse offers fixed-price service agreements for entrepreneurs. When Ponsse takes care of scheduled maintenance, additional security and fine tuning, you can fully concentrate on harvesting and your forest machine
will remain reliable and productive from one worksite to another.
Logger’s best friendwww.ponsse.com
PONSSE SERVICE AGREEMENTS
RELIABILITYA broken machine in the middle of the woods can be a hard financial knock to forest machine entrepreneurs.A PONSSE service agreement keeps your equipment in good condition, so you can stop worrying and concentrate on your work.
RESALE VALUEA regularly maintained machine remains in good condition and retains its resale value. When the machine’s operation and service history is known, potential defects can be predicted and unnecessary compo-nent replacements can be avoided.
FIXED PRICESDuring the service agreement you will save money, since the prices remain the same throughout the agreement period. There are no advance fees, because the work is invoiced only after completed maintenance.
The Logger’s Total service agreement lets you outsource your forest machine's scheduled maintenance to Ponsse. A regularly and professionally maintained machine remains operable and retains its value. Additional security, available for Logger’s Total, extends the standard factory warranty covering all main components, computers and control modules of the machine.
SELECT A SERVICE PACKAGE THAT SUITS YOUR NEEDS
2 ADDITIONAL SECURITY• Additional security as an option for Logger’s Total
• Factory warranty upgrade to 6,000 hours
• Fully replaces main components, computers and control modules
1 LOGGER’S TOTAL• Fixed-price scheduled maintenance
• Duration: 6,000 hours or three years
• No unnecessary component replacements
• The maintained machine retains its value
• The machine operates reliably
PON
SSE
Serv
ice
Agre
emen
ts 0
8/14
1. E
NG
Cop
yrig
ht ©
201
4 Po
nsse
Plc
. PO
NSS
E is
a r
egis
tere
d tr
adem
ark
of P
onss
e Pl
c an
d ot
her
prod
uct
nam
es a
re t
rade
mar
ks o
f Pon
sse
Plc.
Ponsse PlcPonssentie 22FI-74200 VieremäFINLANDTel. +358 20 768 800Fax +358 20 768 8690
Ponsse North America, Inc.4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse UK Ltd.Unit 3, Broomhouses 1 Industrial Estate Lockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202
13
LET’S KEEP PONSSE IN
THE FORESTPONSSE SERVICE AGREEMENTS
Ponsse offers fixed-price service agreements for entrepreneurs. When Ponsse takes care of scheduled maintenance, additional security and fine tuning, you can fully concentrate on harvesting and your forest machine
will remain reliable and productive from one worksite to another.
Logger’s best friendwww.ponsse.com
PONSSE SERVICE AGREEMENTS
RELIABILITYA broken machine in the middle of the woods can be a hard financial knock to forest machine entrepreneurs.A PONSSE service agreement keeps your equipment in good condition, so you can stop worrying and concentrate on your work.
RESALE VALUEA regularly maintained machine remains in good condition and retains its resale value. When the machine’s operation and service history is known, potential defects can be predicted and unnecessary compo-nent replacements can be avoided.
FIXED PRICESDuring the service agreement you will save money, since the prices remain the same throughout the agreement period. There are no advance fees, because the work is invoiced only after completed maintenance.
The Logger’s Total service agreement lets you outsource your forest machine's scheduled maintenance to Ponsse. A regularly and professionally maintained machine remains operable and retains its value. Additional security, available for Logger’s Total, extends the standard factory warranty covering all main components, computers and control modules of the machine.
SELECT A SERVICE PACKAGE THAT SUITS YOUR NEEDS
2 ADDITIONAL SECURITY• Additional security as an option for Logger’s Total
• Factory warranty upgrade to 6,000 hours
• Fully replaces main components, computers and control modules
1 LOGGER’S TOTAL• Fixed-price scheduled maintenance
• Duration: 6,000 hours or three years
• No unnecessary component replacements
• The maintained machine retains its value
• The machine operates reliably
PON
SSE
Serv
ice
Agre
emen
ts 0
8/14
1. E
NG
Cop
yrig
ht ©
201
4 Po
nsse
Plc
. PO
NSS
E is
a r
egis
tere
d tr
adem
ark
of P
onss
e Pl
c an
d ot
her
prod
uct
nam
es a
re t
rade
mar
ks o
f Pon
sse
Plc.
Ponsse PlcPonssentie 22FI-74200 VieremäFINLANDTel. +358 20 768 800Fax +358 20 768 8690
Ponsse North America, Inc.4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse UK Ltd.Unit 3, Broomhouses 1 Industrial Estate Lockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202
15
TECHNICAL SUPPORTWhen acquiring harvesting equipment from Ponsse, you are also
entitled to technical support. Our goal is to take into account the
local conditions and offer our services as close to you as possible.
We offer versatile support from our factory to the local service
centres in the form of training, among other services. The PONSSE
Service Centre, field maintenance and technical assistance will of-
fer you support whenever you need. If you like, you can outsource
the entire maintenance of your harvesting equipment to Ponsse.
15
Service centresThe service centres are located at central
positions in terms of customers’ business
operations and logistics. Part of the serv-
ice centres’ activities are workshops, which
are equipped to provide fast maintenance
operations, thereby ensuring trouble-free
harvesting. The spare part storages located
in connection with the workshops guarantee
minimum lead times for the maintenance
operations.
TECHNICAL SUPPORT
Ponsse’s service centres, field maintenance and technical assistance offer fast and reliable assistance in matters related to technical support. The global Ponsse maintenance network includes approximately 150 service centres. Our maintenance network serves our customers with a high level of professionalism, taking the local customer requirements into account.
Field maintenanceIn addition to the services provided by the
service centres, field maintenance offers
an alternative for maintenance operations.
The highly-equipped service vehicles bring
assistance directly to the site, as appropri-
ate. Field maintenance is a good alternative
in situations where the maintenance proce-
dures performed in the forest can be carried
out in a sensible manner with regard to the
total time spent on maintenance.
Technical assistanceTechnical assistance supports customers
with telephone and e-mail assistance. So-
metimes situations occur that are easier
to solve by telephone by offering advice,
instructions or reviews. If the problem can-
not be solved over the phone, technical as-
sistance can transmit a service request for
field maintenance visit to the site, or make
an appointment with the service centre.
17
OPERATOR TRAININGWhen purchasing a new machine, Ponsse offers you extensive op-
erator training, and we will familiarise you with your new machine
in your own language. We use forest machine and servicing simula-
tors as an aid to our training.
17
Operator Training is an integral part of
each new PONSSE forest machine delivery.
This training ensures that operators know
how to use their machines correctly and
efficiently, thus minimising operating costs.
During operator training, the customer will
learn valuable information about machine
maintenance and servicing needs.
Base machine operator training covers, for
example, the following:
• Engineandhydraulicoillevels
• Controlpanelgauges,switchsignal
lights, warning lights and buzzers
• Controldevices,seatswitches,
OptiControl and crane control system
adjustments
• Dailypreventivemaintenanceactions
Furthermore, the operator training
familiarises the operators with the PONSSE
Opti information system:
• Startinganewworkingsite
• Driver-specificsettings
• Measuringdeviceandharvesterhead
calibration
• Sawingcontrol,PonsseCut,Opti
maintenance
For the crane and harvester heads, the
operator training includes the following:
• Dailypreventivemaintenanceactions
• Colourcodingandstumptreatment
• Pressureadjustment
• Safetyinstructions
• Harvesterheadmaintenanceand
checkups
The operator training also includes the
following safety issues:
• Enteringandexitingthemachine
• Replacingchainandbar
• Harvesterheadmaintenance
• Crane/craneboommaintenance
• Backuppowerandwelding
• Owner’smanuals
• PONSSEServicingcontactinformation
OPERATOR TRAINING
19
Ponsse’s detailedOwner’sManuals andPartsManuals help you
find the information you need about the machine, its operation
and maintenance. Ponsse will deliver the manual for your machine
eitherasahardcopyoronaCD-ROM,inyourownlanguage.The
owner’s manuals will also be installed on your forest machine’s Opti
computer so that they will always be conveniently available, wher-
ever the machine is.
DOCUMENTS
19
Login
1.31.
Click the icon for the desired driver.
2.Select the desired program in the Opti4G program
menu.
Opti4G 4.603
3
A logger’s best friend
ORIG INAL INSTRUCT IONS
OWNER’S MANUAL
ERGO 6W
Crane control4.8
A Left control handle
B Right control handle
Activate the harvester head:
● Switch the Opti on.
● Switch on the crane control switch (39)
● Switch on the harvester head switch (30)
● Press the harvester head openbutton.
Functions
1 Extension out
2 Extension in
3 Luffing boom out
4 Luffing boom in
5 Slew crane left
6 Slew crane right
7 Timber feed backward (slow and fast)
(During the drive, machine steered to the right)
8 Timber feed forward (slow and fast)
(During the drive, machine steered to the left)
9 Booms down
10 Booms up
11 Slew harvester head counterclockwise
12 Slew harvester head clockwise
13 Preset and programming button functions (for different
functions, see the Opti4G Instruction manual)
4 Driving instructions
4 - 9
With a new forest machine, we offer
operator and maintenance manuals and
parts manuals for the base machine,
crane and harvester head. The machine
delivery also includes a manual for the Opti
information system.
The documents are machine-specific, i.e.
designed just for the machine purchased
by you. All documents are available as hard
copies or on a CD or DVD, and they are also
available in the PONSSE forest machine’s
Opti computer. If you have purchased a used
machine or wish to obtain new documents
for your machine, please contact your
closest Service Centre.
Owner’s Manual
Owner’s Manuals for base machine, crane
and harvester head
The owner’s manuals include information
on how the forest machine works, how it
can be safely used, its technical features
and issues pertaining to the everyday
use and maintenance of the machine.
The manuals also include electronic and
hydraulic diagrams to assist in servicing.
The owner’s manuals are currently available
in approximately twenty languages.
Opti Information System Manual
The PONSSE Opti Information system
manual includes detailed information on
the features of the Opti Information system
applications in order to make their use as
easy and effective as possible. The manuals
are currently available in fifteen languages.
Parts ManualsYour machine-specific parts manual can
be used as an aid when you need parts for
servicing the machine. The manual includes
assembly layout drawings, and thus it can
also be used when disassembling and
assembling components. The parts manuals
are currently available in eight languages.
You will always receive reliable and up-to-date documents with your PONSSE Harvesting Solution. The experienced Ponsse Documentation personnel draft operator and maintenance manuals, as well as parts manuals, in close cooperation with Technical Support and Product Development.
DOCUMENTSOwner’s Manuals - Parts Manuals
loggingStrong rootS in
ForeSt machine entrepreneur Einari Vidgrén founded Ponsse in 1970. Today, Ponsse is one of the world’s leading forest machine manufacturers, and its customer-oriented operations are still gui-ded by the wishes and needs of loggers.
We deSign and manuFacture all PONSSE products and their key components ourselves. This guarantees that we remain at the forefront of development and that our products meet the specific requirements of forest professionals. PONSSE forest machines are in use in all key areas of industrial harvesting in the world, close to 40 countries.
ponSSe iS Still a Family-oWned company with its roots deep in the Finnish countryside. A good product range and customer relationships are Ponsse’s foundation stones together with its strong values, committed personnel, and history and traditions. We continue to follow the path outlined by Einari: “We manufacture the best forest machines in the world.”
Ponsse since 1970
The new PONSSE Scorpion rais-es productivity and ergonomics in harvesting to a whole new
level and sets the future standard for the driver’s working environment.
loggingStrong rootS in
ForeSt machine entrepreneur Einari Vidgrén founded Ponsse in 1970. Today, Ponsse is one of the world’s leading forest machine manufacturers, and its customer-oriented operations are still gui-ded by the wishes and needs of loggers.
We deSign and manuFacture all PONSSE products and their key components ourselves. This guarantees that we remain at the forefront of development and that our products meet the specific requirements of forest professionals. PONSSE forest machines are in use in all key areas of industrial harvesting in the world, close to 40 countries.
ponSSe iS Still a Family-oWned company with its roots deep in the Finnish countryside. A good product range and customer relationships are Ponsse’s foundation stones together with its strong values, committed personnel, and history and traditions. We continue to follow the path outlined by Einari: “We manufacture the best forest machines in the world.”
Ponsse since 1970
The new PONSSE Scorpion rais-es productivity and ergonomics in harvesting to a whole new
level and sets the future standard for the driver’s working environment.
2322
Basic machine productsEngine ..................................................................... 23Alternators ..................................................................23Alternator regulators ......................................................23Starters for PONSSE machines ........................................23Scr system parts ...........................................................23V-belts .........................................................................24Poly V-ripped V-belts for PONSSE machines with MB-engines .24Poly V-ribbed belt Eu StAgE iiiB and iiiA ............................25Poly V-ribbed belt Eu StAgE iV .........................................25Cabin ....................................................................... 26Seats and seat accessories ...................................... 26Seats ...........................................................................26Seat bases and seat base accessories ..............................26Seat levellers ................................................................26Seat air springs .............................................................26Seat belts .....................................................................27Seat covers ..................................................................27Windscreen wiper accessories ................................... 27Wiper blades ................................................................27Wiper arms ..................................................................27Windscreen wiper motor ................................................28Windscreen washer accessories ......................................28Audio ....................................................................... 28Radio ...........................................................................28Loudspeaker .................................................................28Antennas ................................................................. 28Radio antenna, Bosch ....................................................28gsm antenna ................................................................29Combined gsm+radio antenna..........................................29Window antenna ...........................................................29gps “tatti” .....................................................................29Phones ........................................................................29Reversing camera ..........................................................29Opti accessories ............................................................29Printers .......................................................................30Printer cartridges ..................................................... 30Hp 450 colour cartridges ...............................................30Bjc 80/85 ...................................................................30Canon i70, i80, iP90, iP100 ...........................................30usb device ....................................................................30Air-conditioning and heatin components....................... 31Fan motors ...................................................................31Heating components ......................................................31Air-conditioning components ...........................................31Filters ..................................................................... 33PonSSE filter sets .................................................. 33Filter sets 600 h, ..........................................................33Eu StAgE iiiA/iiiB engine ................................................33Filter sets 1200h, for harvesters with Eu StAgE iiiA/iiiB engines ........................................33Filter sets 1200h, for forwarders with Eu StAgE iiiA/iiiB engines ........................................33Filter sets 1200h, for machines with caterpillar engines ......34Filter sets 1800h, for harvesters with Eu StAgE iiiA engines ..............................................34Filter sets 1800h, for forwarders with .............................34Eu StAgE iiiA engines ....................................................34Filter sets 1800h, for harvesters with Eu StAgE iV engines ....34Filter sets 1800h, for forwarders with Eu StAgE iV engines ...34Filter sets 900h, Eu StAgE iV engines..............................34original PonSSE filters ............................................. 34Filters for ponsse machines with MB-engine ................ 35Filters for ponsse machines until year 2000 ................ 39Pause heaters .......................................................... 44Pause heaters ...............................................................44Webasto thermo 90s parts ............................................44Webasto 90st parts ......................................................44Webasto thermo t50 d parts ..........................................44Eber dw5 parts .............................................................45Eber dw7 parts .............................................................45Ardic 954 dw parts .......................................................45Electrical equipment.................................................. 46Batteries ................................................................. 46Opti batteries ................................................................46Batteries ......................................................................46
Bulbs ....................................................................... 47Bulb assortment ............................................................47Working light bulbs ........................................................47Large bulbs with metal base ............................................47instrument panel light bulbs .............................................47For tp2000 cabin ..........................................................47Headlights ....................................................................47Working lights ...............................................................48Ponsse working lights .....................................................48Led working lights ..........................................................48Led lights with magnetic fastenings ..................................48Headlights ....................................................................49Electrical connector set ..................................................49Hydraulics ................................................................ 49For valve block ...............................................................49K170LS directional valve, valve block buildups ....................49L90LS directional valve, valve block buildups .....................50Brake charging valve ......................................................50Hydraulic valves ........................................................ 50Directional valve ............................................................50Proportional directional valve ..................................... 52Directional valve ............................................................52Pressure reducing valves ........................................... 52Pre-controlled reducing valve ...........................................53Pressure relief valves ................................................ 53Check valve .............................................................. 54Pressure controlled check valve ................................. 55Check valve with flow control ...........................................55Pressure relief block ......................................................55Mid sections and cover plates .................................... 56Pressure output section .................................................56Output section ...............................................................56Section with M6 threads .................................................56By-pass section .............................................................56Connection block ...........................................................56Connection block ...........................................................56Cover plate ...................................................................56Cover plate ...................................................................56Block ...........................................................................56Mounting for block .........................................................56Screws ........................................................................56O-ring ...........................................................................57Pneumatics .............................................................. 57Booster cylinder ............................................................57Compressed air device ...................................................57Brake parts ..................................................................57other items.............................................................. 58PonSSE Fuel container ............................................. 58Fuelk ............................................................................58Fuel tank accessories .....................................................58Base machine tank sensors ....................................... 59Hydraulic oil tank ...........................................................59Expansion tank ..............................................................59Fuel tank ......................................................................59Oil drain hoses (for tP2000 machines) .............................59Base machine extra protection plates and pipes ........... 59Cabin side box protection plates, all models .......................59Fuel tank protection plates and pipes ................................60Bear ............................................................................60Ergo ............................................................................60Exhaust pipe support and protection plates ........................60Bear ............................................................................60Buffalo(&Dual&King) / Elephant (&King) / Ergo 8W ...........60Ergo 6W ......................................................................60Side plates, stronger material ..........................................60Buffalo .........................................................................60Elephant / ElephantKing .................................................60Bear 8w .......................................................................60Ergo 8w .......................................................................60Ergo 6w / Bear 6w .......................................................60Working light protection plates, harvesters ........................60
2322
Basic Machine Products
AlternAtors
Description No.
NL1 80A MB 0067413
NL1 80A MB accessory BOS0120468053
NCB 80A MB 0067414
NCB 80A MB accessory BOS0986042370
NCB2 100A 0067415
CAT 140A 0058425
For Ponsse machines with Perkins/Valmet engine 100A
BOS0120468066
AlternAtor reGUlAtors
Description No.
For NL1 80 A 0072087
For NL1 80A/100A accessory BOS1197311304
For 80 A NCB BOSF00M145307
For 100 A BOS1197311304
For 100 A NCB BOSF00M145307
For 120 A BOS1197311315
For 140 A BOS1197311316
NCB/NCB2 0069601
NCB/NCB2 100 A, accessory BOSF00M145307
stArters For Ponsse MACHInes
Description No.
VALMET 411, 420, 611 and 620 BOS0001368037
PERKINS 0067417
PERKINS, accessory 0062141
CATERPILLAR 0067418
CATERPILLAR, REMAN 0067420
MB Bosch 0067419
MB, Delco 0068799
MB, Mitsubishi 0068529
MB, accessory BOS0001231002
enGIne
sCr systeM PArts
Description No.
Dryer, complete 0068425
Filter element for a complete dryer 0071206
AdBlue pump 0068430
Filter, AdBlue pump, EU STAGE IIIB 0071207
Filter, AdBlue pump, EU STAGE IV 0074059
Magnet for an AdBlue tank 0071910
Fastener for a magnet 0071912
2524
V-Belts
Size No.
13X875 CAT7E0744
13X1150 0026997
13X1200 0027004
13X1225 0058039
13X1350 0027029
13X1385 0027021
13X1400 0027045
13X1450 0027011
13X1475 0056749
13X1500 0055049
13X1525 0055238
13X1550 0055304
13X1575 0058040
13X1625 0027037
13X1700 0055240
Poly V-rIPPeD V-Belts For Ponsse MACHInes WItH MB-enGInes
Description No.
OM904&OM906 2482 mm 0067422
2482 mm 0072828
OM904&OM906 2580 mm 0067423
2580 mm 0072829
2524
900-series
Basic Machine Products
1 Alternator2 Guide roller3 Water pump4 Crankshaft5 tightening roller6 Air conditioning compressor7 support roller
• ChecktheconditionofthepolyV-ribbedbeltregularly.
• Replacethebeltifitisinapoorcondi-tion.Thebeltmayoperatepoorlyifitisincorrectlyinstalled,worn,torn,frayedordirty.BeforereplacingthepolyV-ribbedbelt,contactanauthorisedPON-SSEserviceformoredetailedreplace-mentinstructions.
1 Charging alternator2 Guide roller3 Crankshaft4 tightening roller5 Water pump6 Guide roller7 Air conditioning compressor
TheenginemayoverheatifthepolyV-ribbedbeltoperatesincorrectly.Inthatcase,thebeltdoesnotrotatethecoolingpumporalternator.
ApolyV-ribbedbeltinapoorconditionmaybetorn,andtheentirebeltorpartsofitmaycomeofftheengineandcausedamagetothoseinthevicinity.
Poly V-ribbed belt eU stage IIIB and IIIA
Poly V-ribbed belt eU stage IV
26 27
seats and seat accessories
seAt leVellers
Description No.
Sit-right, side 0065830
Sit-right, front 0062947
seAt BAses AnD seAt BAse ACCessorIes
Description No.
Mechanical locking 0028477
Air locking, high 0055152
Air locking, low 80 mm 0055088
Brake chain 0063369
Description No.
Brake chain kit, incl. chain + chain fastener 0059070
Brake belt 0059069
Brake kit, incl. chain + brake belt + fasteners 0059068
seAts
Description No.
Bege 3000 Airvent 0068396
BEGE 9000 SE Incl. armrest set 0028484
BEGE 9000 0064821
BEGE 9000 Airvent Including side supports 0064820
BEGE 9000 Airvent, Including side supports and a compressor 0067163
BEGE 3000C&F AIRVENT, 3100L, tilting arm rests, Scorpion 0072983
BEGE 9000SE, tilting arm rests, Scorpion 0072985
CABIn
seAt AIr sPrInGs
Description No.
Bege9000 SE/Airvent 0028483
Bege3000 Airvent 0069970
Bege2000 SE/Airvent 0059031
KAB 0033586
MSG95AL 0063112
26 27
Basic Machine Products
WIPer BlADes
Length No.
500 mm BOS3398110517100
600 mm BOS3398110425
700 mm BOS3398110095
800 mm 0036013
1000 mm BOS3397018199
seAt CoVers
Description No.
Long, with headrest 0055236
Long, airbag ready 0068231
Short, W/O headrest 00552361
Windscreen wiper accessories
seAt Belts
Description No.
Bege 90 cm 0028481
Bege 105 cm 0063592
Four-point safety belt 0071758
WIPer ArMs
Length No.
600 mm long BOS3398102207
For 700 mm blade 0070895
For 800 mm blade 0070895
For 1000 mm blade BOS3398100097
Side-window wiper BOS3398102285100
28 29
WInDsCreen WIPer Motor
Description No.
SIGHT 1 front/rear BOS3397020349
SIGHT 2 front/rear BOS3397020132
TP2000 front BOS3397020349
TP2000 rear BOS0390242407
Side window, old model BOS0390217701100
Side window, right side 0063157
Side window, left side 0063158
WInDsCreen WAsHer ACCessorIes
Description No.
Washing fluid tank, old model 0011114
Washing fluid tank, new model 0062320
Washer motor 0061163
Glass cleaner spray 0029777
Window washing liquid PONSSE Logger’s 5L (-22°C) 0074338
Window washing liquid PONSSE Logger’s 20L (-22°C) 0074337
Window washing liquid PRO PLUS 200L (-22°C) 0074336
rADIo
Description No.
Clarion CZ301E 0070364
Clarion CZ302E 0073876
Kenwood KDC-BT48DAB, USB, CD, BT 0074063
Audio
loUDsPeAKer
Description No.
Pioneer TS-G1322I 0071446
rADIo AntennA, BosCH
Description No.
Antenna+base+cable 0026732
ROD -> 2011 BOS8698114571
Antennas
28 29
Basic Machine Products
GsM AntennA
Description No.
Long GSM rod 0062057
GSM antenna package (incl. arm, base, cable, mini UHF connector) 0062150
CoMBIneD GsM+rADIo AntennA
Description No.
Antenna+base+cable 0061115
Antenna+base 0062196
Rod 0062510
PHones
Description No.
Peitel vehicle phone 0071012
Microphone for a Peitel phone 0071013
WInDoW AntennA
Description No.
Window antenna GSM+GPRS 0062539
GPs “tAttI”
Description No.
GPS “TATTI” 0066167
GPS antenna for a Sierra modem, 30 mm mounting screw 0068808
GPS antenna for a Sierra modem, 10 mm mounting screw 0073889
GPS Caple 161649
GPS Caple PC5 PS0439
reVersInG CAMerA
Description No.
Camera, Brigade BE-800C-NIR 0071699
Display, Brigade BE-970WM-P 7” 0071700
Performance Packages - reversing camera Incl. camera + display + installation equipment
0072604
oPtI ACCessorIes
Description No.
Mouse 0056252
Mouse, USB 0071313
30 31
HP 450 ColoUr CArtrIDGes
Description No.
Black 0063251
Colour 0063252
Printer cartridges
BJC 80/85
Description No.
Print head 0060647
Colur 00573812
Black 00573811
Black, big cartridge Needs place of colour and black cartridges.
0058393
PrInters
Description No.
CANON IP100 0066937
CAnon i70, i80, iP90, iP100
Description No.
Print head (i70) 0062635
Print head (i80, iP90) 0061289
Print head (iP100) 0070308
Colour BCI-15 (i70, i80) 0062633
Colour BCI-16 (iP90) 0063751
Colour CLI-36 (iP100) 0066956
Black BCI-15 (i70, i80, iP90) 0062634
Black PGI-35 (iP100) 0066957
UsB device
Description No.
LPT-USB adapter 0066834
Description No.
Keyboard, PS/2 0057598
Keyboard, USB 0071289
Mouse holder P16486
Adapter PS2-DIN5 0066678
30 31
Basic Machine Products
Air-conditioning and heatin components
FAn Motors
Description No.
SIGHT II 0012701
SIGHT II, metal frame KL156102 KL156112
LIGHT 0042291
Yellow-green 0024331
TP2000 0060586
Machines 2010-> 0068608
HeAtInG CoMPonents
Description No.
Cell, light 0038407
Cell, Sight II 0012704
Cell, Machines 2010-> 0068602
Fan speed control unit KL1105100601
Nozzle flapper, light 0012708
Tap, plastic 0024497
AIr-ConDItIonInG CoMPonents
Description No.
Compressor 0032776
Compressor, machines with MB-engine, accessory 0067190
Dryer 0024283
Expansion valve, rectangular 0036360
Expansion valve, circular 0012700
O-ring, small 0034232
O-ring, medium 0034233
O-ring, large 0034234
Ac-condenser, smaller style 0058001
Ac-condenser, large style 0065365
Evaporator cell, new heater, Machines 2010-> 0068607
Refrigerant 0068944
ASKFOROURREFRIGERANTREFILLOFFER
Description No.
Tap, metal 0012705
Water valve TP2000 & Machines 2010-> 0060589
33
Ponsse offers the most comprehensive and versatile selection of the best forestry technology in the market – for all challenges in harvesting.
The fully new PONSSE Scorpion is the latest member in the range of the world’s leading forest machines. Built without compromises, the harvester is all about the driver.
Offering a fully open cabin view, and unbeatable stability and power, the machine operates bearing the environment in mind and with minimum surface pressure. The revolutionary triple-frame structure ensures a low axis point for levelling, thus making the machine extremely stable and comfortable.Economy and comfort have also been considered in positioning service points. The new 4F engine and the improved hydraulics have enabled extending the service intervals from 600/1,200 hours to 900/1,800 hours.
The new PONSSE Scorpion raises productivity and ergonomics in harvesting to a whole new level and sets a new standard for the driver’s working environment.
PONSSE ScOrPiON
Ponsse North America, inc. 4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse UK Ltd. Unit 3, Broomhouses 1Industrial Estate Lockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202
A REAL BEAST OF A HARVESTER
33
Basic Machine Products
Ponsse offers the most comprehensive and versatile selection of the best forestry technology in the market – for all challenges in harvesting.
The fully new PONSSE Scorpion is the latest member in the range of the world’s leading forest machines. Built without compromises, the harvester is all about the driver.
Offering a fully open cabin view, and unbeatable stability and power, the machine operates bearing the environment in mind and with minimum surface pressure. The revolutionary triple-frame structure ensures a low axis point for levelling, thus making the machine extremely stable and comfortable.Economy and comfort have also been considered in positioning service points. The new 4F engine and the improved hydraulics have enabled extending the service intervals from 600/1,200 hours to 900/1,800 hours.
The new PONSSE Scorpion raises productivity and ergonomics in harvesting to a whole new level and sets a new standard for the driver’s working environment.
PONSSE ScOrPiON
Ponsse North America, inc. 4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse UK Ltd. Unit 3, Broomhouses 1Industrial Estate Lockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202
A REAL BEAST OF A HARVESTER
Ponsse Filter sets
FIlters
* Note! Pressure filter not included.
Now you can get from Ponsse all the necessary filters for all your scheduled maintenance in a conven-ient and economical package. You can easily order the filter set for your machine type with only one part number.
FIlter sets 600 H,eU stAGe IIIA/IIIB enGIneDescription No.
4 cylinder engines 0066522
6 cylinder engines 0066496
Benefits of the filter set • save time during maintenance• get the filters you need more economically
• all the appropriate filters are on hand during maintenance• all filter sets are of Ponsse’s original quality
FIlter sets 1200H, For HArVesters WItH eU stAGe IIIA/IIIB enGInesDescription No.
Beaver 040001 – 040549 0064728
*Beaver 040550 – 040768 00647281
Beaver 0450001 ➠ 00647282
Fox 8w 0240001➠, 0560001➠ 0068584
Ergo 6w 050001 – 051136 0064727
*Ergo 6w 051137 – 051546 00647271
Ergo 6w / 8w 0390001➠, 0230001➠ 00647272
FIlter sets 1200H, For ForWArDers WItH eU stAGe IIIA/IIIB enGInes
Description No.
Buffalo 8w 030001-030902Buffalo 6w 0150001-0150039 0064731
Buffalo 6w/8w 0310001➠/0320001➠ 0070763
Buffalo ADS 0290001– 0290006 0068473
Wisent 080001➠, 090001➠
Elk 0130001➠, 0140001➠
Gazelle 0110001➠
0064732
Elk 6w 0480001➠Elk 8W 0490001➠Wisent 6W 0520001➠Wisent 8W 0530001➠Gazelle 8W 0540001➠
0071811
Elephant/Rexroth 0160001– 0160003, 0170001–0170135 0066019
Elephant/Sauer 0160001– 0160003, 0170001–0170135 0068604
Elephant 6w 0410001➠Elephant 8w 0420001➠ElephantKing 0440001➠
0071679
Bison 020001– 020086 0064733
Caribou 010001– 010118 0064734
noTE! AdBlue filters 0071206 and 0071207 have to be ordered separately for EU STAGE IIIB engines
Description No.
Bear 6w 0180001 – 0180057 0066018
Bear 6w 0470001➠ 00660181
Bear 8w 0210001 – 0210021 0068695
noTE! AdBlue filters 0071206 and 0071207 have to be ordered separately for EU STAGE IIIB engines
3534
By using the original Ponsse filters you can ensure that the system works reliably. The machine’s serv-ice intervals are determined according to the filtering capacity of the original filters. When using generic parts, their functionality cannot be known during the service interval determined by Ponsse. Even though the filters look alike, their flow routes can differ to the extent where the full filtering circulation is not completed. There are also differences in the capacity and service life of filtering elements. A simple test is to compare the weight of the filtering elements. Lighter generic filters contain fewer filtering layers and supporting structures. If the filter’s filtering capacity is not sufficient to cover the entire service interval, the filter will become clogged. Because of weaker supporting structures, it may tear and contaminate the entire system.
original Ponsse filters
FIlter sets 1200H, For MACHInes WItH CAterPIllAr enGInesDescription No.
HS10 Cobra 0064730
HS16 Ergo 0064729
S16 Buffalo 0064735
FIlter sets 1800H, For HArVesters WItH eU stAGe IV enGInesDescription No.
ScorpionKing 0630001➠, A010001➠
0073949
Scorpion 0620001➠, A040001➠ 0073063
Bear 8w 0680001➠, A020001➠ 0073066
Ergo 6w / 8w A050001➠, A090001➠
0073068
noTE! Machines 0620001-0620002 and 0630001-0630003 have different hydraulic filters. The cooling circuit filter is 0072535 and the drive pump filter is 0019541. These filters have to be ordered separately.
FIlter sets 1800H, For ForWArDers WItH eU stAGe IV enGInesDescription No.
Wisent / Elk 8w A030001➠, A070001-> 0074580
Buffalo 8w 0660001➠, A080001-> 0073071
Buffalo ADS A060001➠ 0073071
FIlter sets 900H, eU stAGe IV enGInes
Description No.
4 cylinder engines 0074587
6 cylinder engines 0073505
FIlter sets 1800H, For HArVesters WItH eU stAGe IIIA enGInesDescription No.
Ergo 6w / 8w IIIA A050001➠, A090001➠
0074704
Bear 8w 0460001➠ 00686951
Bear 8w A020001➠ 0074634
ScorpionKing IIIA A010001➠ 0074632
Scorpion IIIA A040001➠ 0074633
FIlter sets 1800H, For ForWArDers WItH eU stAGe IIIA enGInes
Description No.
Buffalo 8w IIIA A080001➠ 0074636
Buffalo AF IIIA A060001➠ 0074636
3736
Machine ErgO 6w 0390001➠, 8w 0230001➠
ErgO 6w A050001➠, 8w A090001➠
BEar 6w 0180001–0180057
BEar 6w 0470001➠
BEar 8w 0210001–0210021
BEar 8w 0460001➠
Description
Engine 6 cyl. inner 0060251 0072654 0060251 0060251 0060251 0060251
Engine 6 cyl. Outer 0060161 0072655 0060161 0060161 0060161 0060161
Cabin inner 0068233 0075179 0060598 0068233 0060598 0068233
Cabin outer 0068232 0075180 0060597 0068232 0060597 0068232
Engine oil MB 4 - - - - - -
Engine oil MB 6 0072974 0072974 0072974 0072974 0072974 0072974
Fuel 0059055 0059055 0059055 0059055 0059055 0059055
water separator 0063422 0063422 0063422 0063422 0063422 0063422
Filter element for a complete dryer 0071206 0071206 - - - -
Filter, AdBlue pump 0071207 0071207 - - - -
Machine BEar 8w A020001➠
ScOrPiON iiia A040001➠
ScOrPiON KiNg iiia A010001➠
cariBOu BiSON gazEllE 0110001➠
Description
working pressure - - - - - -
Hydraulic oil return 0072424 0072053 0072053 0061311 0061012 0061012
Pilot pressure 0036673 0036673 0036673 0036673 0036673 0036673
REX drive transmission - - - - - -
Sauer drive transmission 0063019 0063019 0073890 0019541 0019541 0019541
Cooling circulation 0072383 x 1 0072383 x 1 0072383 x 1 0055233 0055233 -
Breather, tank 0009756 0009756 0009756 0009755 0009755 0009756
Engine 4 cyl. inner - - - 0060250 0060250 0060250
Engine 4 cyl. outer - - - 0060160 0060160 0060160
Engine 6 cyl. inner 0072654 0072654 0072654 - - -
Engine 6 cyl. Outer 0072655 0072655 0072655 - - -
Cabin inner 0075179 0073887 0073887 0060598 0060598 0060598
Cabin outer 0075180 0073950 0073950 0060597 0060597 0060597
Engine oil MB 4 - - - 0073788 0073788 0073788
Engine oil MB 6 0072974 0072974 0072974 - - -
Fuel 0072978 0072978 0072978 0059055 0059055 0059055
water separator 0063422 0063422 0063422 0063422 0063422 0063422
Filter element for a complete dryer - - - - - -
Filter, AdBlue pump - - - - - -
Filters for PONSSE machines with MB-engine
3736
Basic Machine Products
Machine gazEllE 0540001➠
wiSENt 8w 080001➠, 6w 090001➠
wiSENt 6w 0520001➠, 8w 0530001➠
ElK 6w 0130001➠, 8w 0140001➠
ElK 6w 0480001➠, 8w 0490001➠
BuFFalO 6w 0150001–0150039Description
working pressure - - - - - -
Hydraulic oil return 0061012 0061012 0061012 0061012 0061012 0061012
Pilot pressure 0036673 0036673 0036673 0036673 0036673 0036673
REX drive transmission - - - - - -
Sauer drive transmission 0019541 0019541 0019541 0019541 0019541 0019541
Cooling circulation - - - - - 0055233 x 1
Breather, tank 0009756 0009756 0009756 0009756 0009756 0009755
Engine 4 cyl. inner 0060250 0060250 0060250 0060250 0060250 -
Engine 4 cyl. outer 0060160 0060160 0060160 0060160 0060160 -
Engine 6 cyl. inner - - - - - 0060251
Engine 6 cyl. Outer - - - - - 0060161
Cabin inner 0068233 0060598 0068233 0060598 0068233 0060598
Cabin outer 0068232 0060597 0068232 0060597 0068232 0060597
Engine oil MB 4 0073788 0073788 0073788 0073788 0073788 -
Engine oil MB 6 - - - - - 0072974
Fuel 0059055 0059055 0059055 0059055 0059055 0059055
water separator 0063422 0063422 0063422 0063422 0063422 0063422
Filter element for a complete dryer - - - - - 0071206
Filter, AdBlue pump - - - - - 0071207
Machine BuFFalO 8w 030001–030902
BuFFalO 6w 0310001➠, 8w 0320001➠
BuFFalO 8w iiia A080001➠
ElK 6w 0130001➠8w 0140001➠
BuFFalO 8w aF iiia A060001➠
ElEPhaNt 6w 016, 8w 017, rExDescription
working pressure - - - - - -
Hydraulic oil return 0061012 0061012 0072424 0061012 0072424 0061012
Pilot pressure 0036673 0036673 0036673 0036673 0036673 0036673
REX drive transmission - - - - - 0069736
Sauer drive transmission 0019541 0019541 0063019 0019541 0063019 -
Cooling circulation 0055233 x 1 0055233 x 1 0072383 x 1 0055233 x 2 0072383 x 1 0055233 x 1
Breather, tank 0009755 0009756 0009756 0009756 0009756 0009755
Engine 4 cyl. inner - - - - - -
Engine 4 cyl. outer - - - - - -
3938
Machine BuFFalO 8w 030001–030902
BuFFalO 6w 0310001➠, 8w 0320001➠
BuFFalO 8w iiia A080001➠
ElK 6w 0130001➠8w 0140001➠
BuFFalO 8w aDS iiia A060001➠
ElEPhaNt 6w 016, 8w 017, rEx
Description
Engine 6 cyl. inner 0060251 0060251 0072654 0060251 0072654 0060251
Engine 6 cyl. Outer 0060161 0060161 0072655 0060161 0072655 0060161
Cabin inner 0060598 0068233 0075179 0068233 0075179 0060598
Cabin outer 0060597 0068232 0075180 0068232 0075180 0060597
Engine oil MB 4 - - - - - -
Engine oil MB 6 0072974 0072974 0072974 0072974 0072974 0072974
Fuel 0059055 0059055 0059055 0059055 0059055 0059055
water separator 0063422 0063422 0063422 0063422 0063422 0063422
Filter element for a complete dryer 0071206 0071206 0071206 0071206 0071206 0071206
Filter, AdBlue pump 0071207 0071207 0071207 0071207 0071207 0071207
Machine ElEPhaNt 6w 016, 8w 017, SauEr
ElEPhaNt 6w 0410001➠ 8w 0420001➠
ElEPhaNtKiNg 0440001➠
Description
working pressure - - -
Hydraulic oil return 0061012 0061012 0061012
Pilot pressure 0036673 0036673 0036673
REX drive transmission - -
Sauer drive transmission - - -
Cooling circulation 0055233 x 2 0055233 0055233
Breather, tank 0009755 0009756 0009756
Engine 4 cyl. inner - - -
Engine 4 cyl. outer - - -
Engine 6 cyl. inner 0060251 0060251 0060251
Engine 6 cyl. Outer 0060161 0060161 0060161
Cabin inner 0060598 0068233 0068233
Cabin outer 0060597 0068232 0068232
Engine oil MB 4 - - -
Engine oil MB 6 0072974 0072974 0072974
Fuel 0059055 0059055 0059055
water separator 0063422 0063422 0063422
Filter element for a complete dryer 0071206 0071206 0071206
Filter, AdBlue pump 0071207 0071207 0071207
Filters for PONSSE machines with MB-engine
3938
Basic Machine Products
Machine ElEphant 6w 016, 8w 017, SauEr
ElEphant 6w 0410001➠ 8w 0420001➠
ElEphantKing 0440001➠
Description
Working pressure - - -
Hydraulic oil return 0061012 0061012 0061012
Pilot pressure 0036673 0036673 0036673
REX drive transmission - -
Sauer drive transmission - - -
Cooling circulation 0055233 x 2 0055233 0055233
Breather, tank 0009755 0009756 0009756
Engine 4 cyl. inner - - -
Engine 4 cyl. outer - - -
Engine 6 cyl. inner 0060251 0060251 0060251
Engine 6 cyl. Outer 0060161 0060161 0060161
Cabin inner 0060598 0068233 0068233
Cabin outer 0060597 0068232 0068232
Engine oil MB 4 - - -
Engine oil MB 6 0072974 0072974 0072974
Fuel 0059055 0059055 0059055
Water separator 0063422 0063422 0063422
Filter element for a complete dryer 0071206 0071206 0071206
Filter, AdBlue pump 0071207 0071207 0071207
Filters for pOnSSE machines until year 2000
4140
Machine hS15, Valmet 420 engine
hS15, engine
hS15, custom Perkins engine
hS16 ErgO, caterpillar engineDescription
Pilot pressure 0036673 x 2 0036673 x 2 0036673 x 2 0036673 x 2
working pressure 0012956 0012956 0012956 0012956 x 2
Hydraulic oil return 0061311 x 2 0061311 x 2 0061311 x 2 0061012 x 2
Drive transmission 0009753 0009753 0009753 0019541
Breether, compressor - - - 0009755
Breather, tank, short - - - -
Breather, tank, long 0009756 0009756 0009756 0009756
Cooling circulation - - - 0055233 x 2
Air filter, fine 0038148, 0038142 0038148, 0038142 0038148 0038148
Air filter, raw 803A0303 803A0303 - 1281143
Air filter engine, inner 0007769 0038144 0038144 0055200
Air filter engine, outer 0007768 0038143 0038143 0055199
Engine oil VL836647133 0035360 x 2 0035360 x 2 0067406
Fuel BOS1457434154 0019133 x 2 0067411 0067407
water separator - - 0067412 0067408
Filters for PONSSE machines until year 2000
4140
Basic Machine Products
Machine S15, Valmet 420 engine
S15, Perkins engine
S15, custom Perkins engine S15 Eh
Description
Pilot pressure 0036673 0036673 0036673 0036673
working pressure - - - -
Hydraulic oil return 0061311 0061311 0061311 0061311
Drive transmission 0009753 0009753 0009753 0019541
42
Kytke säästökäynnille -niin enemmän voimaa jää yli.Sitä on Feel the Drive.
Vähemmän kustannuksia, enemmän mukavuutta: Webaston Engine-Off Heating tekniikalla seisontalämmityksesi miettii puolestasi – ja kytkeytyy automaattisesti päälle, kun moottori ei enää käy. Hytti pysyy aina miellyttävänä ja moottori käyntilämpötilassa. Näin voit jatkaa heti täydellä teholla! Enemmän tietoja Engine-Off Heating :sta ja lämmitys- ja ilmastointiratkaisuistamme löydät osoitteesta www.webasto.com
Machine S15, Valmet 420 engine S15,
Perkins engineS15, custom Perkins engine S15 Eh
Description
Breether, compressor - - - -
Breather, tank, short - - - -
Breather, tank, long 0009756 0009756 0009756 0009756
Cooling circulation - - - 0055233
Air filter, fine 0038142 0038142 0038142 0038142
Air filter, raw 803A0303 803A0303 803A0303 803A0303
Air filter engine, inner 0007769 0038144 0007769 0007769
Air filter engine, outer 0007768 0038143 0007768 0007768
Engine oil VL836647133 0035360 x 2 0035360 x 2 0035360 x 2
Fuel BOS1457434154 0019133 x 2 0067411 0067411
water separator - - 0067412 0067412
When you switch into economy mode – and then have more power left over.That’s Feel the Drive.
Reduced costs, improved comfort: With Webasto Engine-Off Heating technology your heating system does the thinking for you and automatically activates as soon as the engine’s switched off. The cabin interior always stays comfortable and the engine remains at operating temperature. Then you’re ready to get going again, in an instant. For more information on Engine-Off Heating technology and our heating and air-conditioning solutions, go to www.webasto.com
Filters for PONSSE machines until year 2000
42
Kytke säästökäynnille -niin enemmän voimaa jää yli.Sitä on Feel the Drive.
Vähemmän kustannuksia, enemmän mukavuutta: Webaston Engine-Off Heating tekniikalla seisontalämmityksesi miettii puolestasi – ja kytkeytyy automaattisesti päälle, kun moottori ei enää käy. Hytti pysyy aina miellyttävänä ja moottori käyntilämpötilassa. Näin voit jatkaa heti täydellä teholla! Enemmän tietoja Engine-Off Heating :sta ja lämmitys- ja ilmastointiratkaisuistamme löydät osoitteesta www.webasto.com
When you switch into economy mode – and then have more power left over.That’s Feel the Drive.
Reduced costs, improved comfort: With Webasto Engine-Off Heating technology your heating system does the thinking for you and automatically activates as soon as the engine’s switched off. The cabin interior always stays comfortable and the engine remains at operating temperature. Then you’re ready to get going again, in an instant. For more information on Engine-Off Heating technology and our heating and air-conditioning solutions, go to www.webasto.com
44 45
wEBaStO thErMO 90S PartS
Description No.
Glow plug 0059963
water pump 0059969
Fuel pump 0059956
Combustion air fan 0059950
Thermostat 0059964
Overheating protector 0059966
Flame monitor 0059962
Control unit 0059987
weekly timer 0058466
Burner 0059974
Combustion chamber 0059981
PauSE hEatErS
Description No.
webasto THERMO 90ST D 24V 0064905
webasto THERMO PRO 50 ECO 24V 0072981
TERMI 0028357
PauSE hEatErS
wEBaStO 90St PartS
Description No.
Glow plug 0066535
water pump 0065817
Fuel pump 0059956
Combustion air fan 0066533
Thermostat 0066536
Overheating protector 0066538
Flame monitor 0066534
Control unit 0065499
weekly timer 0058466
Burner 0066530
Combustion chamber 0059981
wEBaStO thErMO t50 D PartS
Description No.
Burner 0068294
water pump 0068295
Fuel pump 0059956
44 45
Basic Machine Products
EBEr Dw5 PartS
Description No.
Glow plug 0028382
Ballast resistor 0028356
water pump 0028379
Fuel pump 0028378
Combustion air fan 0028383
Thermostat 0028381
Overheating protector 0028375
Flame monitor 0028380
Control unit 0028376
weekly timer 0028369
Combustion chamber EB251667190000
EBEr Dw7 PartS
Description No.
Glow plug EB251830010100
Ballast resistor 0028356
water pump EB251667250100
Fuel pump EB251667450000
Combustion air fan EB251667991500
Thermostat 0028381
Overheating protector 0028375
Flame monitor 0028380
Control unit 0028402
weekly timer 0028369
Combustion chamber EB251667190000
arDic 954 Dw PartS
Description No.
Glow plug 0028448
Ballast resistor 0060610
Description No.
Combustion air fan 0068296
Control unit 0068297
weekly timer 0058466
46 47
BattEriES
Description No.
110 Ah 0026419
142 Ah 0026420
180 Ah 0058464
Battery cable 0027516
Battery terminal ( + ) 0025833
Rubber protective cover ( + ) 240516
Battery terminal ( - ) 0025825
Rubber protective cover ( - ) 240524
Battery water 1 L 0029795
Battery water 4 L 0035295
OPti BattEriES
Description No.
UPS Battery 24H 0055999
Radio battery 0060036
Cabin battery PF2000 DC machines 17Ah 0059498
Cabin battery PF2000 AC machines 10Ah 0062318
Measuring CALIPER 0055998
Measuring CALIPER+ 0062046
Measuring Caliper3 0072661
Batteries
The condition of the batteries plays an essential part in guaranteeing uninterrupted operations and operational safety. Insufficient battery fluid and poorly fastened sockets can cause damage to the electrical system’s components. Because
the battery fluid contains acid, wear the required protective equipment when checking it. The fluid level does not need to be checked in service-free batteries.
ElEctrical EquiPMENt
Description No.
water pump 0028450
Fuel pump 0028394
Combustion air fan 0028452
Thermostat 0028453
Description No.
Overheating protector 0028454
Flame monitor 0028455
Control unit 0028395
weekly timer 0028369
46 47
Basic Machine Products
wOrKiNg light BulBS
Description No.
Xenon lamp D2S, Hella 0061377
HID lamp, PONSSE high-intensity discharge lamp D1S 0067514
HID lamp D2S, Osram 0068471
H3 24V/70w 0013110
H3 24V/60w long life 0062856
H4 24V/70w headlight 0024588
largE BulBS with MEtal BaSE
Description No.
24V/21w 0012799
24V/15w 0012808
24V/5w 0012815
Bulbs
iNStruMENt PaNEl light BulBS
Description No.
24V/1.2w Glass base, push fit 0012930
24V/1.2w Glass base + holder 0056856
24V/1.2w Plastic base, screw fit 0012931
24V/3w Metal base 0012914
hEaDlightS
Description No.
Headlight 0056153/0058468
Headlight H4 0056153
Headlight with a parking light H4 0058468
FOr tP2000 caBiN
Description No.
24V/10w halogen 0060131
BulB aSSOrtMENt
Description No.
Bulb assortment 0071279
48 49
wOrKiNg lightS
Description No.
Circular 160 mm BOS0306680001
Circular 140 mm BOS0306481001
Point light 140 mm BOS0306405001
PONSSE wOrKiNg lightS
Description No.
XENON, standing 0070095
XENON, hanging 0070094
Gas-discharge working light,standing, booster 24V 45w 0069530
Gas-discharge working light,hanging, booster 24V 45w 0069531
Gas-discharge working light, standing, 12V 0068476
Gas-discharge working light, hanging, 12V 0068526
HALOGEN H3, standing 0066845
HALOGEN H3, hanging 0066846
Adapter T-Hella Xenon PS0033
Adapter S-Hella Xenon PS0034
Adapter H3 Halogen-Ponsse PS0534
Adapter Hella Xenon-Ponsse PS0535
Connector (Nordic) 0067759
lED wOrKiNg lightS
Description No.
Standing N44 12-24V 40w 1900lm 0070633
Hanging N44 12-24V 40w 1900lm 0071467
High beam N44 12-24V 40w 1900lm 0071468
N46 12-24V 50w 3500lm 0071327
N10LED 12-48V 0072028
lED lightS with MagNEtic FaStENiNgS
Description No.
10-30V 5,5w BRIGHT, 3m cable 0073744 *)
10-30V 5,5w BRIGHT, 5m cable 0073745 *)
10-30V 5,5w BRIGHT, 10m cable 0073746 *)
9-30V 2w RED, 3m cable 0072322 **)
9-30V 2w RED, 5m cable 0072323 **)
9-30V 2w RED, 10m cable 0072324 **)
*) 0073744-0073746 Bright LED light: service light, presentations
**) 0072322-0072324 Red LED light: to indicate the rear overhang of an exces-sively long load
48 49
Basic Machine Products
FOr ValVE BlOcK
Description No.
170 Valve block seal set 0042587
170 Valve block intersection seal set 0033386
09/150 Valve block seal set 0042586
09/150 Valve block intersection seal set 0036677
Pilot valve 0033389
Pilot valve, round propo 0060279
hyDraulicS
ElEctrical cONNEctOr SEt
Description No.
Electrical connector set P16519
hEaDlightS
Description No.
Additional headlight Nordic N1300HID BLACK SATIN 12V 35w 0069528
Additional headlight Nordic N1300HID BLACK SATIN 24V 35w 0069529
K170lS DirEctiONal ValVE, ValVE BlOcK BuilDuPSDescription No.
Grapple 0068659
Extension 0068660
Crane slewing 0068661
Pillar 0068662
50 51
BraKE chargiNg ValVE
Description No.
Nautilus TP2000 0057802
Nautilus, Barbo 0058249
DirEctiONal ValVE
Description No.
- Opti-oil 0033469
DirEctiONal ValVE
Description No.
- on/off functions 0038174
DirEctiONal ValVE
Description No.
- slow feed H60, H53 ja H73 - on/off rotator 0033472
DirEctiONal ValVE
Description No.
- Fast feed valve (main spool pre control) H60, H53, H73 0033473
hydraulic valvesl90lS DirEctiONal ValVE, ValVE BlOcK BuilDuPS Description No.
Tilt 0068083
Rotator 0068084
Rear knives 0068085
Front knives 0068087
Rollers 0068086
50 51
Basic Machine Products
Directional valve
Description No.
- ponsse-cut 0057959
Directional valve
Description No.
- fast feed valve (main spool) H60
0064904
- fast feed valve (main spool) H53 / H73
0064898
Directional valve
Description No.
- small pump control valve HS10, old model 0028041
Directional valve
Description No.
- differential locks - big pump control HS10, old model 0028037
Directional valve
Description No.
- delimbing knives ja feed rollers 2-force valve H60, H53 ja h73
- big pump control valve HS10, new model
0038175
Directional valve
Description No.
- Winch- Crane base tilt- log gate move
0056955
52 53
Proportional directional valve Pressure reducing valves
Directional valve
Description No.
- stump treatment- Rotator 0042962
Directional valve
Description No.
0056956
Directional valve
Description No.
- active suspension valve (regel-valve) HS16 and ergo 0055117
Directional valve
Description No.
- mini steering wheel 0060829
Pressure reDucing valve
Description No.
- 10 - 140 bar, saw bar feeding 0042960
Pressure reDucing valve
Description No.
- 3,7 - 70 bar, saw bar feeding 0056671
Pressure reDucing valve
Description No.
- 20 - 250 bar, constant pressure HS15, old model 0042945
Pressure reDucing valve
Description No.
- 20 - 250 bar, constant pressure HS10, old model 0028042
52 53
Basic Machine Products
Pressure relief valves
Pre-controlleD reDucing valve
Description No.
- Proportional pressure for the feed rollers H60
- Proportional pressure for the delimbing knives H73e
0055028
Pressure relief valves
Description No.
- harvester pump pressure control Ergo/Beaver, old model 0060828
Pressure relief valves
Description No.
- harvester pump pressure control Ergo/Beaver 0061247
Pressure relief valves
Description No.
- 50 - 315 bar, for Indexator rotator 0043014
Pressure relief valves
Description No.
- 50 - 315 bar- main and functions pressure reliefs
H60,H53 ja H73- parking brake S/HS15
0046960
Pressure relief valves
Description No.
- 10 - 200 bar- Delimbing knives 2-power H53 ja H73,
old model0038177
Pressure relief valves
Description No.
- 50 - 315 bar 0043019
Pressure reDucing valve
Description No.
- 20 - 250 bar 0042970
54 55
Pressure relief valves
Description No.
Note! Spare part cartridge 0033327- constant pressure control HS10 0033326
Pressure relief valves
Description No.
- 130 - 135 bar, - constant pressure control HS15 00333240
Pressure relief valves
Description No.
- 210 bar, - brake charging S15eh with Mico-valves 0055170
Pressure relief valves
Description No.
- feed rollers H53 and H73 0043601
check valve
Description No.
- 1 bar- S/HS15 726 0043011
check valve
Description No.
- 1 bar 0043012
check valve
54 55
Basic Machine Products
check valve
Description No.
- 1 bar- saw bar feed 0043013
Pressure controlleD check valve
Description No.
- 5 bar 0038176
Pressure controlleD check valve
Description No.
- 1 bar 0043015
Pressure controlleD check valve
Description No.
- 1 bar 0056709
check valve with flow control
Description No.
- slow feed flow control 0060923
Pressure relief block
Description No.
include pressure controlled check valves- Log gate move- Crane base tilt- Clam bunk
0056933
Pressure controlled check valve
56 57
Mid sections and cover plates
Pressure outPut section
Description No.
- chain tensioner pressure, old model 500663 +0058834
outPut section
Description No.
- output section 0038688
section with M6 threaDs
Description No.
- section with M6 threads 180004
connection block
Description No.
- Opti-oil 230397
connection block
Description No.
- Proportional pressure for the feed rollers H60 513C15
cover Plate
Description No.
- cover plate to free valve places 0038674
block
Description No.
1-places 0038182
2-places 0033480
3-places 0033481
4-places 0042950
Mounting for block
Description No.
1-places 127A53
2-places 909A07
3-places 149A92
4-places 250124
screws
Description No.
M5 - 25 0047201
M5 - 30 0012573
M5 - 40 0012577
M5 - 50 0012569
M5 - 60 0012570
M5 - 70 0012576
M5 - 80 0012578
M5 - 90 0012579
M5 - 100 0039563
M5 - 110 0046980
M5 - 130 0056881
M5 - 145 0046983
cover Plate
Description No.
- brake charging Ergo/Beaver Note! P open to A, and T open to B 0060205
by-Pass section
Description No.
- rotator- stop screw 0060235x2- orifice 0.45mm 0042569x2- cu-seal 0034355x2- allen screw M6-10 0008797x2- O-ring 9.25-1.78 0057170x4
P10682
56 57
Basic Machine Products
Description No.
M5 - 150 0047220
M5 - 155 0057017
M5 - 160 0057669
M5 - 165 0046985
M5 - 190 0046987
o-ring
Description No.
- 7.65 - 1.78 90-shore 0042227
- 9.25 - 1.78 NG6 0038185
- 9.25 - 1. 78 90-shore 0057170
- 9.25 - 1.78 teflon -NG6 00571701
- 23.2 - 2.4 90-shore NG16 0023711
- 9.19 - 2.62 70-shore NG16 0024083
PneuMatics
coMPresseD air Device
Description No.
Freezing protection devixe, KNORR 0061419
Repair kit 00614191
quick exhaust valve ÖR9735000000
booster cylinDer
Description No.
Complete, KNORR 0040185
Replacement diaphragm, KNORR ÖR8971205364
brake Parts
Description No.
Complete cylinder 0012633
Cylinder seals 0029314, 0029280
Cylinder spring 0029299
Fluid reservoir 0012625
Cap 00126261
Description No.
Exhaust valve diaphtragm ÖR8971037944
Pressure regulator 0070942
Regulator repair kit ÖR9753030012
Airol, Antifreeze 0035782
58 59
*) Double bottom for added protection against leaks.
fuel tank accessories
Description No.
Overfill protector 0067956
Fuel refuelling pump 24V 0058492
Refuelling hose AM00070
Fuel refuelling pump, manual pump, (optional equipment for fuel tanks LTD-450 and LTD-900)
0070271
Fuel refuelling pump V12, (optional equipment for fuel tanks LTD-450 and LTD-900)
0070272
Fuel refuelling pump V24, (optional equipment for fuel tanks LTD-450 and LTD-900)
0070273
Ponsse fuel containers
Description No.
450 L, FINNCONT, Refill pump not included 0072422
440 L with hoisting handle 0062795
660 L with hoisting handle 0062796
960 L with hoisting handle 0063732
1100 L with hoisting handle 0063744
440 L with hoisting handle *) 00627951
660 L with hoisting handle *) 00627961
960 L with hoisting handle *) 00637321
1100 L with hoisting handle *) 00637441
LTD-450 L 0070102
LTD-900 L 0070103
Ponsse fuel container
other iteMs
fuelk
Description No.
Fuelk 970L 0071280
58 59
Basic Machine Products
base machine tank sensors
fuel tank
Description No.
Bison 020001-020021, Buffalo 030001-030068, Caribou 2000-2003 380 mm 0060024
Beaver 040001-040167 602 mm 0060026
Bison 020022- , Buffalo 030069-030141, Buffalo Dual 070001-0700035 331,5 mm
0060875
”Gazelle 0110001-, Wisent 080001- 090001, Wisent Dual 0100001-, Elk 0130001- 0140001- 442,5 mm
0061894
Beaver 040168-, Buffalo 030141-, Buffalo Dual 070036-, Elephant 0160001- 0170001- 596 mm
0062422
Beaver 040572- 700mm 0066222
Fox 0240001-, Buffalo ADS700 mm 0066369
Buffalo+ 0320001-,Elephant+ 041001- 0420001- Elephant King 0440001- P0098, P0112 Foxit- 600 mm
0066642
hyDraulic oil tank
Description No.
S10,S15,S16,Bear, Beaver, Bison, Buffalo <2004, Caribou, Elephant, Ergo
AM02719
Bear 0210001➠ 0070353
Buffalo 2004>,Gazelle, Elk Wisent + refuelling pump 0068756
eXPansion tank
Description No.
TP2000 0068757
oil Drain hoses (for tP2000 Machines)Description No.
Oil drain hose 0071480
The hose is installed in the engine’s oil sump in place of the oil plug. With the hose, oil can be changed easily. Before installation, make sure that the hose fits between the un-derbody protection plate and the oil sump.
base machine extra protection plates and pipes
cabin siDe boX Protection Plates, all MoDelsDescription No. pcs
Cabin side box protection plate, right side P42626 1
Cabin side box protection plate, left side P42627 1
Door protection plate P42628 1
60
Reliableknowsreliable
TRELLEBORG WHEEL SYSTEMS
Ponsse is designed for maximum reliability in the
world’s toughest forestry terrains.
Make sure your tires are too.
www.trelleborg.com/wheelsystems
TRELLEBORG and PONSSE
fuel tank Protection Plates anD PiPes
bear
Description No. pcs
Left side lower pipe P43768 1
Right side lower pipe P43767 1
Left side upper pipe P43770 1
Right side upper pipe P43769 1
Front fastener P42671 1
ergo
Description No. pcs
Left side lower pipe P42667 1
Right side lower pipe P42668 1
Left side upper pipe P42669 1
Right side upper pipe P42670 1
Front fastener P42671 1
siDe Plates, stronger Material
buffalo
Description No. pcs
Side plate, right AM03202 1
Side plate, left AM03203 1
elePhant / elePhantking
Description No. pcs
Side plate, right AM03228 1
Side plate, left AM03229 1
bear 8w
Description No. pcs
Side plate, right AM03219 1
Side plate, left AM03220 1
ergo 8w
Description No. pcs
Side plate, right AM03211 1
Side plate, left AM03212 1
ergo 6w / bear 6w
Description No. pcs
Side plate, right AM03427 1
Side plate, left AM03428 1
eXhaust PiPe suPPort anD Protection Plates
bear
Description No. pcs
Exhaust pipe support and protection plate P43129 1
Exhaust pipe support and protection plate P43130 1
Fastener of the exhaust pipe and support P43002 1
Hose clamp 0071739 1
buffalo(&Dual&king) / elePhant (&king) / ergo 8w
Description No. pcs
Exhaust pipe support and protection plate P42969 1
Fastener of the exhaust pipe and support P43002 1
Hose clamp 0071739 1
ERGO 6W
Description No. pcs
Exhaust pipe support and protection plate P44921 1
Fastener of the exhaust pipe and support P43002 1
Hose clamp 0071739 1
working light Protection Plates, harvestersDescription No. pcs
Stronger roof light cover P45916 1
Roof light grille plate P43231 1
Light cover guide rail, right side P45914 1
Light cover guide rail, left side P45915 1
Light cover fastening tap P43232 2
60
Reliableknowsreliable
TRELLEBORG WHEEL SYSTEMS
Ponsse is designed for maximum reliability in the
world’s toughest forestry terrains.
Make sure your tires are too.
www.trelleborg.com/wheelsystems
TRELLEBORG and PONSSE
50%
75 %
General information about inflation pressure, mounting and handling of forest tyresThe inflation pressure is of vital importance for the service life of the tyre and the performance of the machine. To guarantee the tyre’s func-tion and to provide margins for the extra stress a tyre in forest service is exposed to, the inflation pressure should be chosen with precision.
Machine specific recommendations for inflation pressure are based on:• Loadedmachine,accordingtothemanufacture’sstatedloadinkilograms.• Achievelongtyreservicelife.• Thestabilityofthemachine.
The recommendations indicate minimal- normal- and maximum inflation pressure. For estimation, see headline “The effects of different infla-tion pressure”. If a machine specific recommendation is missing, the inflation pressure should be adjusted to the load that the tyre is exposed toinkilograms(machineweight+load)andterrainconditions.
The inflation pressure should be adjusted to the ter-rain conditions and load• Usealowerpressureiftheterrainisrelativelyrockfreeand
where greater bearing capacity is required.• Useahigherpressureforheavyserviceindemandingterrain.
Check on inflation pressure• Thetyremustdailybevisuallycheckedandtheinflationpressure
mustbecheckedatleastonceamonth.•Atyrethathasbeenremovedshouldbecheckedregularlyduring
thefirstweekafterithasbeenremounted.Thisbecauseitmightbeairpocketsbetweenthetyreandtubethatventilateout,andreduces the inflation pressure.
•Theinflationpressureislowerincoldconditionsthaninhotconditions.
ThE EffECTs Of diffEREnT inflaTiOn pREssuREadvantages disadvantages
low inflation pressure Good comfort Reduced stabilityLargecontactsurface Increasedriskoftubedamage/wearLowergroundpressureLesssoildamageIncreased traction
high inflation pressure Increased stability Reduced comfortRequiredwhenusingtracks Increasedriskofcutsandpuncturedamagetothelugtread
Increased sensitivity to point loadsIncreased soil damage and rutsLessgrip
filling forest tyres with fluid• Thetyrecanbefilledwithfluidtoincreasethestabilityandpullforceofthemachine.• Trelleborgrecommendsafillingof50%ofthetyre’svolume.Maximumpermittedis75%.• Theballast(fluid)mustbewater.Atdegreesbelowzero,amixtureofcalciumchloride/waterorglycol/waterisrecommended.•Atamixtureof35%,calciumchlorideincreasesthemixture’sdensityuptoapproximately1.2kg/litre.
By turning the wheel and pressing the valve needle, you can easily decide whether the fluid volume is 75%or50%.•Atcalculationofthewheelload,theentireballastshouldbeaddedtothemachineweight.•Becauseofthelowerairvolume,fluidfilledtyresarelesselasticandforthatreasonalsomore sensitive to point loads. The rolling resistance and the dynamic forces of the wheel and suspension are also increasing.•Onlyusepressuregaugesthattoleratefluidmixtures.•Toobtainthecorrectfluidvolume,lookintoTrelleborg’stechnicaltyremanual atwww.trelleborg.com/wheelsystems_uk.
Mounting• Topreventthetyrefromslippingontherim,useagoodqualityofdryinginstallationpaste.• Inflatethetubeafterithasbeenplacedintothetyre.Thistoavoidthatthetubegetcreased.
step 1: Maximuminflationpressureat use of fitting machine or similar. 1.5barfortyresupto15”. 1.0barforothertyres.
step 2: Inflationtoappliedpressurewithsafetyequipment(blastcageorfillingfromadistance).5barfortyresfittedon15degreerims22.5”26.5”30.5”.2.5barfortyresfittedon5degreerims.The applied pressure is given on the tyre with the symbol above. This pressure should not be confused with the maximum inflation pressure that can be higher than the applied pressure.
NOTE:Anewlyfittedtyreshouldnotbeexposedtohightorqueswithinthefirst24hours.
driving with tracks•Usetherecommendedinflationpressurefortracks.• Checkthatthetracksarecorrectlytensioned.Thetracksmustsag
approximately50mmbetweenthewheels.•Checkthatthetrackfitthetyre.Ononeside,theremustbeadis-
tanceofapproximately15mmbetweenthetrack’ssidesupportandthe tyre.
•Useofchainsdoesnotaffecttheinflationpressure.
Tyre maintenance•Regularinspectionandmaintenanceofthetyreincreasesservice
life.•Atthedailyvisualinspectionofthetyre,itisimportanttonoteany
damage, such as splinters and large gashes or pin hole damage that causesmoisturethatpenetrateintothetyreshell.Anysuchdam-age,shouldberepairedwithoutcausingaseparation(externalrub-berreleasingfromthetyreshell).
•Checkthetensionoftheanti-slidedevices,andmakesurethattheydonothaveanylooselinksorsharppartsthatcandamagethetyre.
•Removeanybranchesorwoodsplintersthathavegottrappedbetween the tyre and rim.
TrelleborgWheelSystems,23181Trelleborg,Phone:+46(0)41051000,Fax:+46(0)41051666,
www.trelleborg.com/wheelsystems
63
Tyres, Tracks, chains
Tyres ....................................................................... 64Trelleborg Twin forestry 422SB .......................................64Trelleborg 428 Twin forestry 428SB ................................64Nokian Forest King F ......................................................65Nokian Forest King Trs ...................................................65Nokian Forest King F2 ....................................................65Nokian Forest King TrS2 ................................................65Nokian rider .................................................................65Tianli ............................................................................66Tyre pressure guard, replaces valve cap ............................66Tyre pressure guard with cabin display ..............................66Tyre inflator ..................................................................66Inner tubes ...................................................................66Chains ..................................................................... 69PONSSE wheel chains Double Diamond .............................69PONSSE wheel chains Triple Diamond ...............................69Tellefsdal Double Diamond ...............................................69Tellefsdal Triple Diamond .................................................69Ofa Matti W Double Diamond ..........................................71Ofa Matti W Triple Diamond ............................................71Gunnebo Metsä-Ässä 130 ..............................................72Gunnebo Verkkoketju 130 ...............................................72Gunnebo Megahokki 160 ................................................72Gunnebo Superhokki 160 ................................................72Chain links ....................................................................73Wheel chain mounting tools ............................................73Chain holders ........................................................... 73Olofsfors Tracks ....................................................... 78Olofsfors Eco Tracks with Side Guides ...............................78Olofsfors Eco-Track Thinning Track ....................................78Eco-Baltic .....................................................................79Eco-Soft........................................................................79Eco-Max .......................................................................79Eco-Magnum .................................................................80Eco-U ...........................................................................80Eco-Evo ........................................................................80Pro-Track......................................................................80Conventional tracks, no side guides ............................ 81Standard tracks.............................................................81Combination tracks ........................................................8110 wheel tracks ............................................................81Wheel tracks ................................................................81Clark tracks ............................................................. 81Terra (Tl-85) ................................................................81Terra (Tl-95) ................................................................83Grouzer Gl84 ...............................................................83TXCl ...........................................................................83TXl .............................................................................83TXl .............................................................................84rocky (rl-50) ...............................................................84Track accessories ..................................................... 85Track joints, links and slide stopper pieces .........................85Olofsfors track tension case ............................................86Track tension case .........................................................86Havel track tensioner .....................................................86Clark track tensioner ......................................................86
Tyres, Tracks, Chains
64 65
NOKIANNokian Tyres is a pioneer in forestry machinery tyres. Nokian Tyres has decades of experience in manufacturing and designing forestry tyres in close co-operation with forestry machinery manufacturers.
FOREST KINGA stable forestry tyre with sturdy sides especially designed for forwarders. Excellent fit with tracks.
Tyres
Trelleborg Twin foresTry 422sb
Description No.
600/55-26.5 0062335
710/45-26.5 0062332
600/65-34 0056849
710/55-34 0056796
Trelleborg 428 Twin foresTry 428sb
Description No.
710/40-22.5 0063585
600/55-26.5 0056848
710/45-26,5 18 PR 0061721
710/45-26,5 20 PR 0072180
750/50-26.5 0063646
T428 is an all-round tire with ex-cellent pull force and compatibility with tracks and chains.
• Excellent pull force in tough terrain
• The open pattern and the lug design allows good self-cleaning
• The enhanced shoulder of the tire ensures an unbeatable stability and comfort
• A large contact area gives the tire a low ground bearing pressure
• Excellent contact area for tracks and chains
T422 is a tire with extra pull force and best possible self-cleaning. With advantage be used without track and chains.
• Extra pull force and brilliant accessibility, due to the aggressive tread pattern
• The open tread pattern gives the best possible self-cleaning
• Can be used with tracks and chains
64 65
Tyres, Chains, TraCks
noKiAn foresT King f
Description No.
710/40-22.5 PR16 0063163
710/40-24.5 PR20 0066921
600/55-26.5 PR20 0063013
710/45-26.5 PR16 0063014
710/45-26.5 PR20 0061852
710/45-26,5 PR24 0069747
750/55-26.5 PR20 0062460
780/55-26.5 PR20 0070538
800/40-26.5 PR20 0061363
RIDER radial tyre for CTl forestry machines. Excellent traction without tracks, comfortable on a hard surface.Straight sides and a patented side protection.
noKiAn rider
Description No.
650/45R24.5 0067220
600/55/26.5 0066979
710/45/26.5 0064976
800/50R26.5 0070461
600/65R34 0068393
710/55R34 0068394
noKiAn foresT King Trs
Description No.
600/50-22.5 PR20 0070644
710/40-22.5 PR16 0055295
750/55-26.5 PR20 0062869
noKiAn foresT King Trs2
Description No.
600/55-26.5 20PR 0074603
710/45-26.5 20PR 0073697
noKiAn foresT King f2
Description No.
600/55-26,5 20PR 0074597
710/45-26,5 20PR 0073930
710/45-26,5 24PR 0074327
750/55-26,5 24PR 0074610
6766
inner Tubes
Description No.
600/50-22.5 0026114
700/45-22.5 0026117
710/40-24.5 0066922
600/55-26.5 0061507
650/65-26.5 0062459
700/50-26.5 0061506
750/55-26.5 0062459
800/40-26.5 0057861
600/65-34 0028761
700/55-34 0028761
750/65-34 (Trelleborg) 0068698
700/70-34 0064451
Tyre inflATor
Description No.
Tyre inflator 0030957
Tyre pressure guArd, replAces vAlve cAp
Description No.
Tyre pressure guard 0070425
Tyre pressure guArd wiTh cAbin displAy
Description No.
Tyre pressure guard for 6w forest machines 0072864
Tyre pressure guard for 8w forest machines 0072865
Tyre pressure guard for 10w forest machines 0072866
The valve cap is replaced by the pressure guard. When installed for the first time, the pressure guard is calibrated according to the tyre pressure. If the tyre pressure decreases too much, the pressure guard starts to blink. The package contains four pressure guards, including four transparent valve caps.
TiAnli
Description No.
700/50-26.5 20PR 0072434
Nokian Forest King F2 Nokian Forest King TRS 2
WWW.NOKIANTYRES.COM/HEAVY
Nokian Forest Rider
TRACK GRIP FOR DEMANDING FORESTRY USE
EXCELLENT TRACTION IN MOST DEMANDING FORESTRY USE
DRIVING COMFORT AND ABSOLUTE TRACTION
MASTERS OF THE FOREST
6766
Nokian Forest King F2 Nokian Forest King TRS 2
WWW.NOKIANTYRES.COM/HEAVY
Nokian Forest Rider
TRACK GRIP FOR DEMANDING FORESTRY USE
EXCELLENT TRACTION IN MOST DEMANDING FORESTRY USE
DRIVING COMFORT AND ABSOLUTE TRACTION
MASTERS OF THE FOREST
69
Superior quality chain
U-Grip
• Class leading tyre side wall protection
• Unique stud arrange- ment for longer life and assured grip
• Boron-Alloy-Steel is heat treated in a proprietary technique for ultimate hardness and durability
69
Tyres, Chains, TraCks
ponsse wheel chains Triple diamond
Size No.
710-26.5 0066158
700-34 0066159
ponsse wheel chains double diamond
Size No.
700-22.5 0064169
600-26.5 0064167
700-26.5 0064170
600-34 0064168
700-34 0064171
chains
PONSSE wheel chainsPONSSE chains are assembled manually and manufactured of high-quality materials with special emphasis on a uniform hardness and tensile strength. In addition, extensive testing and practical experiences have shown that PONSSE chains endure more wear, resulting in a longer service life.
TellefsdAl double diamond
Size Description No.
600/65-34 U-Grip 16 mm 0061405
600/55-26.5 U-Grip 16 mm 0061406
600/50-22.5 U-Grip 16 mm 0062075
700/55-34710/55-34 U-Grip 16 mm 0061404
750/65-34 U-Grip 16 mm 0072987
TELLEFSDAL U-GRIPThe U-Grip chain has a unique structure, with a “U” stud welded under the flat-lying chain links. The studs on the vertical links together with the “U” studs guarantee the best grip on the market. The triple-diamond model also includes a very dense sideways protection.
TellefsdAl Triple diamond
Size Description No.
650/60-26.5 U-Grip 16 mm 0072986
700/70-34 U-Grip 16 mm 0066013
700/50-26.5710/45-26.5 U-Grip 16 mm 0061407
700/45-22.5710/40-22.5 U-Grip 16 mm 0060547
750/55-26.5780/55-26.5 U-Grip 16 mm 0066014
Superior quality chain
U-Grip
• Class leading tyre side wall protection
• Unique stud arrange- ment for longer life and assured grip
• Boron-Alloy-Steel is heat treated in a proprietary technique for ultimate hardness and durability
70 71
OFAOFA stands for the green chains, earlier known to quality conscientious users as Ovako chains. All traction chains are made from case hardened boron steel. The mounting and dismounting of OFA chains is a simple one-man operation. OFA chains offer excellent grip and good protection against external damage. OFA chains are available for all popular tire sizes.
– a new concept for forestry chains!
• Dual link, longitudinal pattern is optimized for smooth and effi cient driving• Less elongation compared to diamond style chains• Fitting and maintenance simplifi ed• Side chains offer protection to tyre fl anks• Maintains its´ position on the tyre
MATTI WMatti W Supertight pattern gives a good tire protection against external damage. Designed for heavy use and hard conditions, e.g. for scarifying work. Available in thicknesses of 13 mm, 16 mm and 19 mm, depending on the tyre size.
70 71
3T 3ST
Tyres, Chains, TraCks
ofA MATTi w Triple diamond
Size Description No.
750/65-34 16 mm, 3T 0072991
710/55-34 16 mm, 3T, Trelleborg T422 0072913
700/70-34 16 mm. 3T 0065544
700/55-34 19 mm, 3ST 0062208
700/55-34 16 mm, 3T, 19 mm vertical pin 0062098
700/55-34 16 mm, 3T 0056804
600/65-34 16 mm, 3T, 19 mm vertical pin 0057346
600/65-34 16 mm, 3T 0057869
800/40-26.5 16 mm, 3T, with tensioning chain 0069999
780/55-26.5 16 mm, 3T 0071210
750/55-26.5 16 mm, 3T 0064760
700/50-26.5710/45-26.5
16 mm, 3T, 19 mm vertical pin, with tensioning chain
0062874
700/50-26.5710/45-26.5
16 mm, 3T, with tensioning chain 0056805
650/65-26.5 16 mm, 3T 0072990
600/55-26.5 16 mm, 3T 0057868
700/45-22.5710/40-22.5
13 mm, 3T, with tensioning chain 0057483
600/50-22.5 13 mm, 3T, with tensioning chain 0057167
Matti W Triple Diamond offer the best possible grip a tire chain can offer. Especially designed for tire width 650 mm or wider. Thicknesses 13 mm, 16 mm or 19 mm.
ofA MATTi w double diamond
Size Description No.
700/55-34 19 mm, 2T 0057647
700/55-34 16 mm, 2T 0044511
600/65-34 19 mm, 2T 0056984
600/65-34 16 mm, 2T 0044512
700/50-26.5710/45-26.5 19 mm, 2T 0057345
700/50-26.5710/45-26.5
16 mm, 2T with tensioning chain 0044513
600/55-26.5 16mm, 2T, 19mm vertical pin 0062227
600/55-26.5 16mm, 2T 0044515
700/45-22.5710/40-22.5
13 mm, 2T with tensioning chain 0033681
600/50-22.5 13 mm, 2T with tensioning chain 0033680
Matti W Double Diamond offers an excellent grip and a good wear-resistance.13 mm, 16 mm or 19 mm.
– a new concept for forestry chains!
• Dual link, longitudinal pattern is optimized for smooth and effi cient driving• Less elongation compared to diamond style chains• Fitting and maintenance simplifi ed• Side chains offer protection to tyre fl anks• Maintains its´ position on the tyre
72 73
gunnebo Metsä-Ässä 130
Size Description No.
600/50-22.5 Metsä-ässä 130 0033678
700/45-22.5 Metsä-ässä 130 0033679
600/55-26.5 Metsä-ässä 130 0044484
600/65-34 Metsä-ässä 130 0044493
700/50-26.5 Metsä-ässä 130 0044489
700/55-34 Metsä-ässä 130 0044494
gunnebo verkkoketju 130
Size Description No.
600/50-22.5 Verkkoketju 130 0057332
700/45-22.5 Verkkoketju 130 0057333
600/55-26.5 Verkkoketju 130 0044492
700/50-26.5 Verkkoketju 130 0044499
gunnebo Megahokki 160
Size Description No.
600/55-26.5 Megastud 160 TS 0062256
600/65-34 Megastud 160 TS 0062873
700/50-26.5 Megastud 160 TS 0061875
750/55-26.5 Megastud 160 TS 0064982
700/55-34 Megastud 160 TS 0062049
700/70-34 Megastud 160 TS 0065453
Megastud 160 TS- Developed to meet the rigorous forestconditions.- Provides excellent traction- Offering all over tyre protection- De-signed to offer outstanding durability- Perfect fit to tyre*=TS= Tyre side protection and tension chain.
Superstud 160TS- Provides excellent combi-nationoftractionandtyreprotection.•Cross-chain16mm•U-stud19mm•Ring19mm•Sidechain13mm•Tensionchain9mm•Rustprotected by darkblue chainpaint
Superstud 160-Crosschain16mm•U-stud19mm•Ring19mm•Sidechain13mm •Rustprotectedbydarkbluechainpaint
gunnebo superhokki 160
Size Description No.
600/55-26.5 Superstud 160 TS 0062602
700/50-26.5 Superstud 160 0044505
800/40-26.5 Superstud 160 TS 0058036
72 73
Tyres, Chains, TraCks
chAin linKs
Description No.
16 mm Chain link PONSSE 0073706
13 mm Chain link OFA 0062119
16 mm Chain link OFA 0028720
Chain link pin 00287201
wheel chAin MounTing Tools
Description No.
Wheel chain tightener BABAC ST0295
Wheel chain tightener SCISSORS model 0063217
Mechanical ST0351
Hydraulic ST0352
Chain pin extractor 0063734
chAin holders
Description No.
22,5 0064359
26,5 0064360
chAin holders
Description No.
22,5 0064922
26,5 0064923
34 0064924
chain holders
chAin holders
Description No.
22,510 bolts 0066790
26,5 0066788
26,5 Low hub, 175mm high 0066789
34 0066815
7574
www.eco-tracks.com
EVO-SOFT™
The EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
MAGNUM™
The best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
ECO-TRACK™
One concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The ben-efits of the ECO-Track make it one of the most environmentally friendly track offerings.
www.olofsfors.com Tel +46 (0)930-311 40
7574
EVO-MJäreytetty telamalli EVO:sta. MAX-telamallista tuttu, vahva, lyhyellä ja-olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-viin soveltuvan telamallin, jonka vierintävastus on pieni.
MAXRaskaimpien metsäkoneiden, vaativiin työtehtäviin soveltuva telamalli. Max-telan pyörä- ja maapito on hyvä. Pitkien, päistään taivutettujen telakenkien ja tiheän telakenkäjaon ansiosta telan kantokyky on myös hyvä.
MAX-MAGNUMSekatelamalli, joka on sekä kantava että pitoa antava. Toimii myös turvemailla.
OFMäkisiin, kivisiin, savisiin tai lumisiin maastoihin soveltuva tela. Hyvä pyörä- ja maapito, vetokyky ja puhdistuvuus.
ECO-TRACKYleistela, joka soveltuu lähes kaikkiin metsäkonemalleihin ja maasto-kohteisiin. Hyvä kantavuus ja maapito.
SOFTSoft soveltuu pitkien, muotoiltujen telakenkiensä ansiosta pehmeisiinkin työkohteisiin ja suojaa samalla maaperää. Telamallin pyöräpito maa-perään nähden on myös hyvä.
EVOMonipuolinen metsäkonetela. EVO:n pyöräpito on erinomainen ja telan rengassuojaavuus on myös hyvä. Telakenkämuoto aikaansaa lisäksi hyvän renkaan ja telan välisen puhdistuvuuden lumesta tai savesta.
EVO-SOFTTela, jonka muotoillut, pitkät, sivulenkkilinjan ylittävät telakengät li-säävät koneen kantokykyä ja suojaavat maaperää. Pyörä- ja maapito ja puhdistuvuus ovat EVO-Softin lisäominaisuuksia.
ECO-TRACKYleistela, joka soveltuu lähes kaikkiin metsäkonemalleihin ja maasto-kohteisiin. Hyvä kantavuus ja maapito.
SOFTSoft soveltuu pitkien, muotoiltujen telakenkiensä ansiosta pehmeisiinkin työkohteisiin ja suojaa samalla maaperää. Telamallin pyöräpito maa-perään nähden on myös hyvä.
EVOMonipuolinen metsäkonetela. EVO:n pyöräpito on erinomainen ja telan rengassuojaavuus on myös hyvä. Telakenkämuoto aikaansaa lisäksi hyvän renkaan ja telan välisen puhdistuvuuden lumesta tai savesta.
EVO-SOFTTela, jonka muotoillut, pitkät, sivulenkkilinjan ylittävät telakengät li-säävät koneen kantokykyä ja suojaavat maaperää. Pyörä- ja maapito ja puhdistuvuus ovat EVO-Softin lisäominaisuuksia.
ECO-TRACKYleistela, joka soveltuu lähes kaikkiin metsäkonemalleihin ja maasto-kohteisiin. Hyvä kantavuus ja maapito.
SOFTSoft soveltuu pitkien, muotoiltujen telakenkiensä ansiosta pehmeisiinkin työkohteisiin ja suojaa samalla maaperää. Telamallin pyöräpito maa-perään nähden on myös hyvä.
EVOMonipuolinen metsäkonetela. EVO:n pyöräpito on erinomainen ja telan rengassuojaavuus on myös hyvä. Telakenkämuoto aikaansaa lisäksi hyvän renkaan ja telan välisen puhdistuvuuden lumesta tai savesta.
EVO-SOFTTela, jonka muotoillut, pitkät, sivulenkkilinjan ylittävät telakengät li-säävät koneen kantokykyä ja suojaavat maaperää. Pyörä- ja maapito ja puhdistuvuus ovat EVO-Softin lisäominaisuuksia.
ECO-TRACKYleistela, joka soveltuu lähes kaikkiin metsäkonemalleihin ja maasto-kohteisiin. Hyvä kantavuus ja maapito.
SOFTSoft soveltuu pitkien, muotoiltujen telakenkiensä ansiosta pehmeisiinkin työkohteisiin ja suojaa samalla maaperää. Telamallin pyöräpito maa-perään nähden on myös hyvä.
EVOMonipuolinen metsäkonetela. EVO:n pyöräpito on erinomainen ja telan rengassuojaavuus on myös hyvä. Telakenkämuoto aikaansaa lisäksi hyvän renkaan ja telan välisen puhdistuvuuden lumesta tai savesta.
EVO-SOFTTela, jonka muotoillut, pitkät, sivulenkkilinjan ylittävät telakengät li-säävät koneen kantokykyä ja suojaavat maaperää. Pyörä- ja maapito ja puhdistuvuus ovat EVO-Softin lisäominaisuuksia.
EVO-MA powerful variant of the EVO track with the proven MAX linkage system that works for the heaviest machines. An all around track providing excellent traction, flotation and anti-slip properties. Also available with the new generation cross members with curved ends and suitable for rough terrain and very demanding conditions.
MAXA premium track for large machines with the new generation extended cross members and closer linkage system that provides smooth travel and increased flotation. Suitable for rough terrain and very deman-ding conditions such as steep slopes, rocky terrain and deep snow.
MAX-MAGNUMA combination of Magnum and OF cross members brings together both grip and carrying capacity. An excellent track for peat bogs.
OFThe track for steep, rocky and muddy terrain. The cleaning properties make it popular in winter conditions. Light weight and economical where traction is the primary requirement. The cross member design provides excellent strength and anti-slip properties against the tire.
ECO-TRACKOne concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The benefits of the ECO-Track make it one of the most environmentally friendly track offerings.
SOFTThe new generation of extended cross members with curved ends for additional flotation and easier machine turning. Increases traction on hilly terrain and reduces ground disturbance on sensitive sites.
EVOAn all around track providing excellent traction and good flotation. The cross member design is self cleaning and provides excellent strength and anti-slip properties against the tire. The unique sunken cleat position minimizes welding stresses when re-cleating.
EVO-SOFTThe EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
ECO-TRACKOne concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The benefits of the ECO-Track make it one of the most environmentally friendly track offerings.
SOFTThe new generation of extended cross members with curved ends for additional flotation and easier machine turning. Increases traction on hilly terrain and reduces ground disturbance on sensitive sites.
EVOAn all around track providing excellent traction and good flotation. The cross member design is self cleaning and provides excellent strength and anti-slip properties against the tire. The unique sunken cleat position minimizes welding stresses when re-cleating.
EVO-SOFTThe EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
ECO-TRACKOne concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The benefits of the ECO-Track make it one of the most environmentally friendly track offerings.
SOFTThe new generation of extended cross members with curved ends for additional flotation and easier machine turning. Increases traction on hilly terrain and reduces ground disturbance on sensitive sites.
EVOAn all around track providing excellent traction and good flotation. The cross member design is self cleaning and provides excellent strength and anti-slip properties against the tire. The unique sunken cleat position minimizes welding stresses when re-cleating.
EVO-SOFTThe EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
ECO-TRACKOne concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The benefits of the ECO-Track make it one of the most environmentally friendly track offerings.
SOFTThe new generation of extended cross members with curved ends for additional flotation and easier machine turning. Increases traction on hilly terrain and reduces ground disturbance on sensitive sites.
EVOAn all around track providing excellent traction and good flotation. The cross member design is self cleaning and provides excellent strength and anti-slip properties against the tire. The unique sunken cleat position minimizes welding stresses when re-cleating.
EVO-SOFTThe EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
www.eco-tracks.com
EVO-SOFT™
The EVO track with extended and curved cross members that provides improved load capacity on sensitive ground and good traction in hilly terrain. The track is also gentler to the terrain’s surface layer.
MAGNUM™
The best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
ECO-TRACK™
One concept, the best all around track. Fits most machine types and offers good traction and flotation on most ground conditions. The ben-efits of the ECO-Track make it one of the most environmentally friendly track offerings.
www.olofsfors.com Tel +46 (0)930-311 40
7776
EVO-MJäreytetty telamalli EVO:sta. MAX-telamallista tuttu, vahva, lyhyellä ja-olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-viin soveltuvan telamallin, jonka vierintävastus on pieni.
MAXRaskaimpien metsäkoneiden, vaativiin työtehtäviin soveltuva telamalli. Max-telan pyörä- ja maapito on hyvä. Pitkien, päistään taivutettujen telakenkien ja tiheän telakenkäjaon ansiosta telan kantokyky on myös hyvä.
MAX-MAGNUMSekatelamalli, joka on sekä kantava että pitoa antava. Toimii myös turvemailla.
OFMäkisiin, kivisiin, savisiin tai lumisiin maastoihin soveltuva tela. Hyvä pyörä- ja maapito, vetokyky ja puhdistuvuus.
EVO-MJäreytetty telamalli EVO:sta. MAX-telamallista tuttu, vahva, lyhyellä ja-olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-viin soveltuvan telamallin, jonka vierintävastus on pieni.
MAXRaskaimpien metsäkoneiden, vaativiin työtehtäviin soveltuva telamalli. Max-telan pyörä- ja maapito on hyvä. Pitkien, päistään taivutettujen telakenkien ja tiheän telakenkäjaon ansiosta telan kantokyky on myös hyvä.
MAX-MAGNUMSekatelamalli, joka on sekä kantava että pitoa antava. Toimii myös turvemailla.
OFMäkisiin, kivisiin, savisiin tai lumisiin maastoihin soveltuva tela. Hyvä pyörä- ja maapito, vetokyky ja puhdistuvuus.
EXTela, joka tekee metsäkoneesta vaikeiden rinteiden etenijän. Korkea, kapea telakenkä on takeena etenemiskyvylle syvässä lumessa, vaikeis-sa mäkimaastoissa tai kivisissä työkohteissa.
EXCVahvarakenteinen, todella raskaiden koneiden telamalli. Kapea telakenkä antaa vetokyvyn ja rengaspidon, leveä telakenkä lisää telamallin kantokykyä. Vankat materiaalimitat ovat perustana telamallin pitkälle käyttöiälle.
BALTICTelamalli pehmeisiin, helposti vaurioituviin maastoihin. Kenkämuoto mahdollistaa risumaton ehjänä pysymisen sen päällä ajettaessa ja suojaa samalla maapohjaa ja juuristoa.
MAGNUMBalticista kehitetty, kantavampi telamalli. Optimoitu, pitkä telakenkä on erinomaisesti maapohjaa suojaava ja ylivoimaisen kantokyvyn antava.
EXTela, joka tekee metsäkoneesta vaikeiden rinteiden etenijän. Korkea, kapea telakenkä on takeena etenemiskyvylle syvässä lumessa, vaikeis-sa mäkimaastoissa tai kivisissä työkohteissa.
EXCVahvarakenteinen, todella raskaiden koneiden telamalli. Kapea telakenkä antaa vetokyvyn ja rengaspidon, leveä telakenkä lisää telamallin kantokykyä. Vankat materiaalimitat ovat perustana telamallin pitkälle käyttöiälle.
BALTICTelamalli pehmeisiin, helposti vaurioituviin maastoihin. Kenkämuoto mahdollistaa risumaton ehjänä pysymisen sen päällä ajettaessa ja suojaa samalla maapohjaa ja juuristoa.
MAGNUMBalticista kehitetty, kantavampi telamalli. Optimoitu, pitkä telakenkä on erinomaisesti maapohjaa suojaava ja ylivoimaisen kantokyvyn antava.
EVO-MJäreytetty telamalli EVO:sta. MAX-telamallista tuttu, vahva, lyhyellä ja-olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-viin soveltuvan telamallin, jonka vierintävastus on pieni.
MAXRaskaimpien metsäkoneiden, vaativiin työtehtäviin soveltuva telamalli. Max-telan pyörä- ja maapito on hyvä. Pitkien, päistään taivutettujen telakenkien ja tiheän telakenkäjaon ansiosta telan kantokyky on myös hyvä.
MAX-MAGNUMSekatelamalli, joka on sekä kantava että pitoa antava. Toimii myös turvemailla.
OFMäkisiin, kivisiin, savisiin tai lumisiin maastoihin soveltuva tela. Hyvä pyörä- ja maapito, vetokyky ja puhdistuvuus.
EXThe cross member has been designed for the most demanding condi-tions where traction is the primary requirement. Suitable for conditions such as deep snow, steep inclines and rocky terrain. EX is one of the best self cleaning tracks and very durable.
EXCThe next generation combi track for the larger machines operating in rough terrain and very demanding conditions. Offers excellent traction and flotation. The cross member thickness ensures optimal performance and lifetime. Also available with the new generation cross members with curved ends.
BALTICProvides high flotation in soft and sensitive terrain. The smooth cross member profile protects the ground, roots and brush mat. Ideal for thinning applications.
MAGNUMThe best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
EXThe cross member has been designed for the most demanding condi-tions where traction is the primary requirement. Suitable for conditions such as deep snow, steep inclines and rocky terrain. EX is one of the best self cleaning tracks and very durable.
EXCThe next generation combi track for the larger machines operating in rough terrain and very demanding conditions. Offers excellent traction and flotation. The cross member thickness ensures optimal performance and lifetime. Also available with the new generation cross members with curved ends.
BALTICProvides high flotation in soft and sensitive terrain. The smooth cross member profile protects the ground, roots and brush mat. Ideal for thinning applications.
MAGNUMThe best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
EVO-MA powerful variant of the EVO track with the proven MAX linkage system that works for the heaviest machines. An all around track providing excellent traction, flotation and anti-slip properties. Also available with the new generation cross members with curved ends and suitable for rough terrain and very demanding conditions.
MAXA premium track for large machines with the new generation extended cross members and closer linkage system that provides smooth travel and increased flotation. Suitable for rough terrain and very deman-ding conditions such as steep slopes, rocky terrain and deep snow.
MAX-MAGNUMA combination of Magnum and OF cross members brings together both grip and carrying capacity. An excellent track for peat bogs.
OFThe track for steep, rocky and muddy terrain. The cleaning properties make it popular in winter conditions. Light weight and economical where traction is the primary requirement. The cross member design provides excellent strength and anti-slip properties against the tire.
EVO-MA powerful variant of the EVO track with the proven MAX linkage system that works for the heaviest machines. An all around track providing excellent traction, flotation and anti-slip properties. Also available with the new generation cross members with curved ends and suitable for rough terrain and very demanding conditions.
MAXA premium track for large machines with the new generation extended cross members and closer linkage system that provides smooth travel and increased flotation. Suitable for rough terrain and very deman-ding conditions such as steep slopes, rocky terrain and deep snow.
MAX-MAGNUMA combination of Magnum and OF cross members brings together both grip and carrying capacity. An excellent track for peat bogs.
OFThe track for steep, rocky and muddy terrain. The cleaning properties make it popular in winter conditions. Light weight and economical where traction is the primary requirement. The cross member design provides excellent strength and anti-slip properties against the tire.
EVO-MA powerful variant of the EVO track with the proven MAX linkage system that works for the heaviest machines. An all around track providing excellent traction, flotation and anti-slip properties. Also available with the new generation cross members with curved ends and suitable for rough terrain and very demanding conditions.
MAXA premium track for large machines with the new generation extended cross members and closer linkage system that provides smooth travel and increased flotation. Suitable for rough terrain and very deman-ding conditions such as steep slopes, rocky terrain and deep snow.
MAX-MAGNUMA combination of Magnum and OF cross members brings together both grip and carrying capacity. An excellent track for peat bogs.
OFThe track for steep, rocky and muddy terrain. The cleaning properties make it popular in winter conditions. Light weight and economical where traction is the primary requirement. The cross member design provides excellent strength and anti-slip properties against the tire.
7776
UTela on saanut nimensä U-poikkileikkauksen omaavasta telakengästä. Malli antaa hyvän kantokyvyn ja maapidon.
U-RUBBERU-tela, johon on vulkanoitu kumipinta. Malli on kehitetty metsäkonei- siin, joilla joudutaan metsässä työskentelyn yhteydessä usein ylitt-ämään asfalttiteitä.
PROEdullinen yleistela monitoimikoneisiin ja max. 14 tonnia painaviin kuormatraktoreihin. Hyvä kantavuus ja pidennetyn telakenkäjaon ansiosta on telan puhdistuvuutta tehostettu.
UTela on saanut nimensä U-poikkileikkauksen omaavasta telakengästä. Malli antaa hyvän kantokyvyn ja maapidon.
U-RUBBERU-tela, johon on vulkanoitu kumipinta. Malli on kehitetty metsäkonei- siin, joilla joudutaan metsässä työskentelyn yhteydessä usein ylitt-ämään asfalttiteitä.
PROEdullinen yleistela monitoimikoneisiin ja max. 14 tonnia painaviin kuormatraktoreihin. Hyvä kantavuus ja pidennetyn telakenkäjaon ansiosta on telan puhdistuvuutta tehostettu.
UTela on saanut nimensä U-poikkileikkauksen omaavasta telakengästä. Malli antaa hyvän kantokyvyn ja maapidon.
U-RUBBERU-tela, johon on vulkanoitu kumipinta. Malli on kehitetty metsäkonei- siin, joilla joudutaan metsässä työskentelyn yhteydessä usein ylitt-ämään asfalttiteitä.
PROEdullinen yleistela monitoimikoneisiin ja max. 14 tonnia painaviin kuormatraktoreihin. Hyvä kantavuus ja pidennetyn telakenkäjaon ansiosta on telan puhdistuvuutta tehostettu.
EXTela, joka tekee metsäkoneesta vaikeiden rinteiden etenijän. Korkea, kapea telakenkä on takeena etenemiskyvylle syvässä lumessa, vaikeis-sa mäkimaastoissa tai kivisissä työkohteissa.
EXCVahvarakenteinen, todella raskaiden koneiden telamalli. Kapea telakenkä antaa vetokyvyn ja rengaspidon, leveä telakenkä lisää telamallin kantokykyä. Vankat materiaalimitat ovat perustana telamallin pitkälle käyttöiälle.
BALTICTelamalli pehmeisiin, helposti vaurioituviin maastoihin. Kenkämuoto mahdollistaa risumaton ehjänä pysymisen sen päällä ajettaessa ja suojaa samalla maapohjaa ja juuristoa.
MAGNUMBalticista kehitetty, kantavampi telamalli. Optimoitu, pitkä telakenkä on erinomaisesti maapohjaa suojaava ja ylivoimaisen kantokyvyn antava.
EXTela, joka tekee metsäkoneesta vaikeiden rinteiden etenijän. Korkea, kapea telakenkä on takeena etenemiskyvylle syvässä lumessa, vaikeis-sa mäkimaastoissa tai kivisissä työkohteissa.
EXCVahvarakenteinen, todella raskaiden koneiden telamalli. Kapea telakenkä antaa vetokyvyn ja rengaspidon, leveä telakenkä lisää telamallin kantokykyä. Vankat materiaalimitat ovat perustana telamallin pitkälle käyttöiälle.
BALTICTelamalli pehmeisiin, helposti vaurioituviin maastoihin. Kenkämuoto mahdollistaa risumaton ehjänä pysymisen sen päällä ajettaessa ja suojaa samalla maapohjaa ja juuristoa.
MAGNUMBalticista kehitetty, kantavampi telamalli. Optimoitu, pitkä telakenkä on erinomaisesti maapohjaa suojaava ja ylivoimaisen kantokyvyn antava.
UA track for all operating conditions. The U shaped cross member provides good traction and excellent flotation. Suitable for small to medium machines and works well in wet, soft and hilly terrain. Also available with the new generation extended cross members for addi-tional flotation, less ground disturbance and easier machine turning.
U-RUBBERA rubberized track that helps protect any hard top road. Similar qu-alities as the U track but with rubber inserts that are ideal for frequent road transportation, short distances between cut blocks and sensitive terrain.
PROThe all-round track for harvesters and forwarders up to 14 tons. It is ideal for thinnings. Equipped with a longer cross member partition for better cleaning of snow and mud. The smooth cross member provides protection of the ground, roots and brush mat.
UA track for all operating conditions. The U shaped cross member provides good traction and excellent flotation. Suitable for small to medium machines and works well in wet, soft and hilly terrain. Also available with the new generation extended cross members for addi-tional flotation, less ground disturbance and easier machine turning.
U-RUBBERA rubberized track that helps protect any hard top road. Similar qu-alities as the U track but with rubber inserts that are ideal for frequent road transportation, short distances between cut blocks and sensitive terrain.
PROThe all-round track for harvesters and forwarders up to 14 tons. It is ideal for thinnings. Equipped with a longer cross member partition for better cleaning of snow and mud. The smooth cross member provides protection of the ground, roots and brush mat.
UA track for all operating conditions. The U shaped cross member provides good traction and excellent flotation. Suitable for small to medium machines and works well in wet, soft and hilly terrain. Also available with the new generation extended cross members for addi-tional flotation, less ground disturbance and easier machine turning.
U-RUBBERA rubberized track that helps protect any hard top road. Similar qu-alities as the U track but with rubber inserts that are ideal for frequent road transportation, short distances between cut blocks and sensitive terrain.
PROThe all-round track for harvesters and forwarders up to 14 tons. It is ideal for thinnings. Equipped with a longer cross member partition for better cleaning of snow and mud. The smooth cross member provides protection of the ground, roots and brush mat.
EXThe cross member has been designed for the most demanding condi-tions where traction is the primary requirement. Suitable for conditions such as deep snow, steep inclines and rocky terrain. EX is one of the best self cleaning tracks and very durable.
EXCThe next generation combi track for the larger machines operating in rough terrain and very demanding conditions. Offers excellent traction and flotation. The cross member thickness ensures optimal performance and lifetime. Also available with the new generation cross members with curved ends.
BALTICProvides high flotation in soft and sensitive terrain. The smooth cross member profile protects the ground, roots and brush mat. Ideal for thinning applications.
MAGNUMThe best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
EXThe cross member has been designed for the most demanding condi-tions where traction is the primary requirement. Suitable for conditions such as deep snow, steep inclines and rocky terrain. EX is one of the best self cleaning tracks and very durable.
EXCThe next generation combi track for the larger machines operating in rough terrain and very demanding conditions. Offers excellent traction and flotation. The cross member thickness ensures optimal performance and lifetime. Also available with the new generation cross members with curved ends.
BALTICProvides high flotation in soft and sensitive terrain. The smooth cross member profile protects the ground, roots and brush mat. Ideal for thinning applications.
MAGNUMThe best choice for extreme flotation and ground protection in very soft conditions. With the new generation of extended cross members, it also minimizes ground disturbance when turning. The smooth cross member profile protects the ground, roots and brush mat.
78 79
olofsfors eco TrAcKs wiTh side guides
Description No.
ECO-OF 600-22.5 ELS/T404/T423, 22mm 0044438
ECO-OF 600-22.5 TRS/T428, 22mm 0058145
ECO-OF 700/710-22.5 ELS/FKF/M404/T423, 22mm 0060004
ECO-OF 700/710-22.5 TRS/T428, 22mm 0044483
ECO-OF 600-26.5 TRS/T422, 22mm 0044441
700-26.5 ELS/FKF/T423/T428/Rider, 26mm 0065563
ECO-OF 700/710-26.5 ELS/FKF/T423/T428, 22mm 0057660
ECO-OF 700/710-26.5 TRS/T422, 22mm 0062617
750-26.5 ELS/FKF/TRS, 26mm 0064911
olofsfors eco-TrAcK Thinning TrAcK
Description No.
Thinning track 600-22.5 ELS/T404/T423, 22mm 0055079
Thinning track 600-22.5 TRS/T428, 22mm 0057149
Thinning track 700/710-22.5 ELS/FKF/M404/T423, 22mm 0044439
Thinning track 700/710-22.5 TRS/T428, 22mm 0057150
Thinning track 600-26.5 ELS/FKF/T421/T428, 22mm 0044434
Thinning track 600-26.5 TRS/T422, 22mm 0057991
600-26,5 ELS/FKF/T421/T428/Rider, 26mm 0068655
Thinning track 650/55-26,5, 22mm 0065454
Thinning track 700/710-26.5 ELS/FKF/T423/T428, 22mm 0044435
Thinning track 700/710-26.5 TRS, 22mm 0057992
Thinning track 700/710-26,5 ELS/FKF/ T423/T428, 26mm 0063602
710-26.5 T422, 22mm 0068673
750/55-26,5, 26mm 0065005
800-26.5 FKF/T423, 22mm 0058037
ECO-OFA track that can cope with steep, stony and muddy terrain with very good results. ECO-OF’s self-cleaning properties make it also a very popular track in tough snow conditions.
ECO-Track One concept, a world standard for tracks. Clearly the most popular track among professionals! ECO-Tracks have become a concept and a world standard for tracks. ECO-Tracks are a flexible track that is suitable for almost all machine types and ground conditions. The track provides excellent grip with good flotation on most types of ground.
olofsfors Tracks
78 79
Tyres, Chains, TraCks
eco-bAlTic
Description No.
ECO-BALTIC 600-22.5 ELS/T404/T423, 22mm 0063416
ECO-BALTIC 600-22.5 TRS/T428, 22mm 0062359
ECO-BALTIC 700-22.5 ELS/M404/T423/FKF, 22mm 0060333
ECO-BALTIC 700-22.5 TRS/T428, 22mm 0062360
ECO-BALTIC 700/710-26.5 ELS/FKF/T423/T428, 26mm 0059822
ECO-BALTIC 700/710-26.5 TRS/, 26mm 0062358
ECO-BALTIC 800-26.5 FKF/T423, 26mm 0063417
ECO-BALTICA good choice for wet and sensitive ground and for thinning operations. The track for soft and sensitive ground and for careful thinning. The shape of the cross member makes this track extremely suitable for driving on brush mats. The track “protects” the ground and roots thanks to its excellent flotation.
eco-sofT
Description No.
ECO-SOFT 700/710-26.5 ELS/FKF/T423/T428, 26mm 0062533
700/710-22.5 ELS/FKF, 22mm 0069002
750/55-26.5 ELS/FKF/TRS, 26mm 0065713
ECO-SOFTWith the new generation of cross member. Is a further development of our ECO-Track system that provides additional flotation on sensitive ground, yet retains excellent grip for hilly terrain. The new shape of the cross member gives the machine a softer motion among stumps and rocks and “protects” both link systems and the surface layer of the ground.
eco-MAx
Description No.
700/710-26,5 ELS/FKF/T428/T423 (narrow), 26mm 0065768
700/710-26.5 ELS/FKF/T423/T428,Rider, max 26mm 0065374
750/55-26,5 ELS/FKF/TRS, 22mm 0064984
780/55-26.5 FKF (narrow), max 26mm 0070590
ECO-MAXIs a track for really tough assignments and the largest machines! The track has a shape that provides a good grip in steep terrain and good flotation on softer ground. With a new link system and closer partition between the cross members, this track has very low rolling resistance and very good ground-friendly properties thanks to the design of the cross members.
80 81
eco-MAgnuM
Description No.
ECO-MAGNUM 600-26.5 ELS/FKF/T421/T428, 22mm 0057001
ECO-MAGNUM 600-26.5 TRS/T422, 22mm 0044432
700/710-26.5 ELS/FKF/T428/T423, 22mm 0064837
LONG 916 mm, 700/710-26.5 ELS/FKF/T428/T423, 22mm 0066897
1023 mm 700/710-26.5 ELS/FKF/T428/T423, 22mm 0066636
ECO-MAGNUMSame advantages as ECO-Baltic, but slightly improved. The track for extremely soft and sensitive ground and for careful thinning. The wide shape of the cross member makes this track extremely suitable for driving on brush mats. The track “protects” the ground and roots thanks to its excellent flotation.
pro-TrAcK
Description No.
700/710-26.5 ELS/FKF/T428/T423 0066685
eco-u
Description No.
ECO-U 600-26.5 ELS/FKF/T421/T428, 22mm 0062953
700/710-26.5 ELS/FKF/T428/T423, 22mm 0062209
ECO-UECO-U can cope with both wet and hilly ground. Is the track that can cope with both wet and hilly ground conditions. This track has cross members with a U-shaped profile, making them especially suitable for ground with a soft and damp layer of soil.
eco-evo
Description No.
600-26.5 FKF, ELS, RIDER, T428, 22mm 0071122
600-26.5 TRS, T422, 22mm 0071123
600-22.5 FKF, ELS, Rider, 22mm 0071124
700/710-22.5 FKF, ELS, T404, T423, 22mm 0071125
700/710-22.5 TRS, T428, Alliance 344, 22mm 0071126
700/710-26.5 FKF, ELS, RIDER, T428, 22mm 0070547
700/710-26.5 TRS, 22mm 0071127
700/710-26.5 T422, 22mm 0071128
700/710-26.5 FKF, ELS, RIDER, T428 SOFT, 22mm 0071129
600-26.5 FKF, ELS,RIDER, T428, 26mm 0071130
700/710-26.5 FKF, ELS, RIDER, T428, TIANLI, 26mm 0069925
700/710-26.5 TRS, 26mm 0071131
700/710-26.5 T422, 26mm 0071132
700/710-26.5 FKF, ELS, RIDER, T428, TIANLI SOFT, 26mm 0071133
750-26.5 FKF, ELS, TRS, 26mm 0071134
750-26.5 FKF, ELS, TRS SOFT, 26mm 0070693
750-26.5 T428, 26mm 0071135
80 81
Tyres, Chains, TraCks
clark tracks
TerrA (Tl-85)
Description No.
710/40-22.5 / 24 Nokian Forest King F 0071817
710/40-22.5 / 24 Trelleborg T428 0071858
710/40-24.5 / 24 Nokian Forest King F 0071820
710/40-24.5 / 24 Trelleborg T428 0071859
710/45-26.5 / 24 Nokian Forest King F 0069655
710/45-26.5 / 24 Trelleborg T428 0071860
710/45-26.5 / 24 Trelleborg T422 0071861
750/55-26.5 / 24 Nokian Forest King F 0071821
750/55-26.5 / 24 Trelleborg T428 0071862
710/45-26.5 / 28 Nokian Forest King F 0068733
750/55-26.5 / 28 Nokian Forest King F 0071822
710/45-26.5 / 28 Trelleborg T428 0071863
710/45-26.5 / 28 Trelleborg T422 0071864
750/55-26.5 / 28 Trelleborg T428 0071865
coMbinATion TrAcKs
Description No.
Combination 600-26.5 ELS/FKF/T421/T428, 22mm 0033704
Combination 700/710-26.5 ELS/FKF/T423/T428, 22mm 0044433
wheel TrAcKs
Description No.
700/55-34 ECO-MAGNUM, 22mm 0067575
10 wheel TrAcKs
Description No.
710/26.5 TRS 0066966
Every other track shoe is max, and every other magnum. Long rear tracks of a 10-wheeler. Width 916 mm.
710/26.5 ELS/FK 0066634
Every other track shoe is max, and every other magnum. Long rear tracks of a 10-wheeler. Width 916 mm.
710/26.5 ELS/FK 0066897
Eco-Magnum track shoes, long rear tracks of a 10-wheeler. Width 916 mm.
710/26.5 ELS/FK 0066636
Eco-Magnum, front tracks of a 10-wheeler. Width 1023 mm.
sTAndArd TrAcKs
Description No.
Standard 600-26.5 ELS/FKF/T421/T428, 22mm 0044437
Standard 700/710-26.5 ELS/FKF/T423/T428, 22mm 0056999
conventional tracks, no side guides
Track for rocky, muddy and hilly terrain, also demanding winter conditions.
83www.clarktracks.comE: [email protected] T: +44 (0) 1387 722370
CLARKTRACKShigh performance for maximum work life
Terra Grouzer Rocky Flotation TXL TXCL
Clark Tracks specialise in building high performance
tracks for all ground conditions and machine applications
across the world. Our tracks are specifically designed
and manufactured to give high performance, combined
with the longest possible working life.
Manufactured to endure the most extreme & demanding terrains
83
Tyres, Chains, TraCks
Txcl
Description No.
710/40-22.5 / 24 Nokian Forest King F 0071834
710/40-22.5 / 24 Trelleborg T428 0071879
710/40-24.5 / 24 Nokian Forest King F 0071835
710/40-24.5 / 24 Trelleborg T428 0071880
710/45-26.5 / 24 Nokian Forest King F 0071836
710/45-26.5 / 24 Trelleborg T428 0071881
710/45-26.5 / 24 Trelleborg T422 0071882
750/55-26.5 / 24 Nokian Forest King F 0071840
750/55-26.5 / 24 Trelleborg T428 0071883
710/45-26.5 /28 Nokian Forest King F 0071841
710/45-26.5 /28 Trelleborg T428 0071884
710/45-26.5 /28 Trelleborg T422 0071885
750/55-26.5 / 28 Nokian Forest King F 0071842
750/55-26.5 / 28 Trelleborg T428 0071886
grouZer gl84
Description No.
710/40-22.5 / 24 Nokian Forest King F 0071825
710/40-22.5 / 24 Trelleborg T428 0071870
710/40-24.5 / 24 Nokian Forest King F 0071826
710/40-24.5 / 24 Trelleborg T428 0071871
710/45-26.5 / 24 Nokian Forest King F 0071827
710/45-26.5 / 24 Trelleborg T428 0071872
710/45-26.5 / 24 Trelleborg T422 0071873
750/55-26.5 / 24 Nokian Forest King F 0071830
750/55-26.5 / 24 Trelleborg T428 0071874
710/45-26.5 / 28 Nokian Forest King F 0071832
710/45-26.5 / 28 Trelleborg T428 0071875
710/45-26.5 / 28 Trelleborg T422 0071876
750/55-26.5 / 28 Nokian Forest King F 0071833
750/55-26.5 / 28 Trelleborg T428 0071877
TerrA (Tl-95)
Description No.
710/45-26.5 / 28 Nokian Forest King F 0071823
710/45-26.5 / 28 Trelleborg T428 0071866
710/45-26.5 / 28 Trelleborg T422 0071868
750/55-26.5 / 28 Nokian Forest King F 0071824
750/55-26.5 / 28 Trelleborg T428 0071869
Txl
Description No.
710/40-22.5 / 24 Nokian Forest King F 0071843
710/40-22.5 / 24 Trelleborg T428 0071887
710/40-24.5 / 24 Nokian Forest King F 0071844
www.clarktracks.comE: [email protected] T: +44 (0) 1387 722370
CLARKTRACKShigh performance for maximum work life
Terra Grouzer Rocky Flotation TXL TXCL
Clark Tracks specialise in building high performance
tracks for all ground conditions and machine applications
across the world. Our tracks are specifically designed
and manufactured to give high performance, combined
with the longest possible working life.
Manufactured to endure the most extreme & demanding terrains
84 85
www.clarktracks.comE: [email protected] T: +44 (0) 1387 722370
CLARKTRACKShigh performance for maximum work life
The ULTIMATE accessoryTracks for all-machines, on all-terrains, in all-seasons.
rocKy (rl-50)
Description No.
710/40-22.5 / 24 Nokian Forest King F 0071850
710/40-22.5 / 24 Trelleborg T428 0071896
710/40-24.5 / 24 Nokian Forest King F 0071851
710/40-24.5 / 24 Trelleborg T428 0071897
710/45-26.5 / 24 Nokian Forest King F 0071852
710/45-26.5 / 28 Nokian Forest King F 0071853
Txl
Description No.
710/40-24.5 / 24 Trelleborg T428 0071888
710/45-26.5 / 24 Nokian Forest King F 0071845
710/45-26.5 / 24 Trelleborg T428 0071889
710/45-26.5 / 24 Trelleborg T422 0071890
750/55-26.5 / 24 Nokian Forest King F 0071846
750/55-26.5 / 24 Trelleborg T428 0071891
710/45-26.5 / 28 Nokian Forest King F 0071848
710/45-26.5 / 28 Trelleborg T428 0071893
710/45-26.5 / 28 Trelleborg T422 0071894
750/55-26.5 / 28 Nokian Forest King F 0071849
750/55-26.5 / 28 Trelleborg T428 0071895
84 85
www.clarktracks.comE: [email protected] T: +44 (0) 1387 722370
CLARKTRACKShigh performance for maximum work life
The ULTIMATE accessoryTracks for all-machines, on all-terrains, in all-seasons.
Tyres, Chains, TraCks
TRACK TENSIONERSOlofsfors Tensioner Tool makes the mounting easier and faster. Tools are available for the most common Track models.
TrAcK joinTs, linKs And slide sTopper piecesDescription No.
olofsfors
Track joint 18X85 0028696
Track joint 18X135 0028688
Track joint 22X90 0028712
Track joint 22X135 0028704
Track joint 26x105 0067971
Track joint 26x155 0067972
Connecting piece for track joint, 22mm 00287121
Connecting piece for track joint, 26mm 00679711
olofsfors
22x49,5x51,5 0067969
26x51x55 0067970
Combination track 0067175
Combination track 0067176
Combination track 0067177
45x15x132/80 Eco-track 0069154
45x18x150/80 Baltic-track 0071448
45x15x150, all Olofsfors tracks with 22 mm side link 0072463
Track accessories
clark
JL-22-95 00625541
JL-24-160 0070470
JL-28-105 0071248
JL-28-160 0071249
slide stopper piece for tracks
45x20x27 0064798
45X35X20 0064705
45X35X20, Slide stopper set 80 pcs 006470580
50x30x35 0072429
65x50x25 0067627
Track joint screw 0068786
eco-Track widening piece, welded
0071657
86
olofsfors TrAcK Tension cAse
Description No.
Eco-Track/Soft 0061822
Eco-OF/Max 0061823
Eco-L 0061824
Eco-U/Wide 0058348
Eco-Baltic/Magnum 0061826
ECO-Max-Magnum 0067120
Combination track 0061825
Eco-EVO 0070323
TrAcK Tension cAse
0070535
Contents:1 pc Gear system1 pc Eco-Track T-jaw1 pc Eco-Track threaded jaw1 pc Eco-OF T-jaw1 pc Eco-OF threaded jaw1 pc Eco-Baltic T-jaw1 pc Eco-Baltic threaded jaw
1 pc Case1 pc Grease tube 60 g1 pc Cleaning brush2 pcs Bolt M20x50 Eco-Of1 pc Extension1 pc Drawing hook pair
hAvel TrAcK Tensioner
Description No.
Mechanical track tensioner ST0351
Hydraulic track tensioner ST0352
ChECK ThE TENSION OF ThE TRACKS
Dimension A must be approximately 50 mm (2”).
clArK TrAcK Tensioner
Description No.
All models 0072110
87
Harvester Products
Flange damages ........................................................ 88Saw bars and accessories ......................................... 89Saw Bars .....................................................................89Sprockets .....................................................................90Sharpening angles .........................................................91Saw bar fastening ..........................................................91Saw chain rollers ...........................................................91Cut-to-length .................................................................91Chain couplers ..............................................................92Saw chain maintenance ..................................................92Saw chain lubrication pumps ...........................................93Stump treatment pumps .................................................93Harvesterhead o-ring sets ...............................................93Electric connector kit, H-series harvesterheads ..................93Sensors ................................................................... 94H60/H60e ..................................................................94H53 ............................................................................94How to connect sensors ............................................ 94H73 ............................................................................95H73e ...........................................................................95H5 / H6 / H7 / H8......................................................95550 / 650 ..................................................................95Multipole cables ............................................................96Sensor tester ................................................................96Terminal blocks .............................................................963-Way valves .................................................................97O-ring below valve ..........................................................97Saw operating valve, new model .......................................97Flow distribution cartidge ................................................97Rotating connector ........................................................97Rotating connector, Taimi ................................................98BSP .............................................................................98Rotating connector, Taimi ................................................98ORFS ...........................................................................98Rotating connector, Indexator ..........................................98Measuring wheels ..................................................... 98H60 / H73e ................................................................98H53 and H73 ..............................................................98H7/H8 ........................................................................99Measuring wheel package ...............................................99Support wheels H60 ......................................................99Support roller assemblies ...............................................99
Bearings .................................................................. 99H60 ............................................................................99H53/H73 ....................................................................99H6/H7/H8 ................................................................100H5 ............................................................................100Bushing sets ...............................................................100Rubber pads ...............................................................100Springs ......................................................................100Chains .......................................................................100Sharpening of the delimbing knives ........................... 101Delimbing knives ..................................................... 101Measuring tool ............................................................101H60/H60e ................................................................101H53 ..........................................................................102H73 / H73e ..............................................................102Rear Knives H73e ...................................................102H5 ............................................................................102H6 ............................................................................102H8 ............................................................................103H7 & H7Euca .............................................................103Upper Knife ................................................................103Front Knives ...............................................................103Rear Knives H7 / H7EUCa ...........................................103Colour marking parts ...................................................103Bottom wear plate .......................................................104Log guide plate ............................................................104Feed motors ...............................................................104POnSSE CT+ chain tensioner package .............................105Saw motors ................................................................105Planetary gears ...........................................................106Slewing motors ...........................................................106
Harvester Products
88 89
DAMAGE: Cracking in the chain groove, excessive wear of the chain groove behind the end wheel
CAUSE/REASON: Loose chain
DAMAGE:Burnt flange tip, broken end wheel
CAUSE/REASON: Chain too tight
DAMAGE: Burn marks around rivets; broken/worn, jammed end wheel
CAUSE/REASON: Overheat in bearings, clogged oil channel
DAMAGE: Burn marks on the flange frame
CAUSE/REASON: Flattened knife groove, clogged oil channel
Flange damages
88 89
Harvester Products
Saw Bars
Chain Type Tail Bar Length Notes Sprocket PonSSe oregon
2.0 mm wide 64 cm 13-15 0065974 0028622
2.0 mm wide 75 cm 13-15 0065970 0028604
2.0 mm wide 75 cm 16-17 0065970 0028604
2.0 mm wide 80 cm 13-15 0061448
2.0 mm wide 64 cm UREA 13-15 0066675 00286262
2.0 mm wide 64 cm UREA 16-17 0066675 00286262
2.0 mm wide 75 cm UREA 13-15 0066673 00286282
2.0 mm wide 75 cm UREA 16-17 0066673 00286282
2.0 mm wide 80 cm UREA 13-15 0063181
2.0 mm JET-FIT 82 cm UREA 13-15 00586931
2.0 mm JET-FIT 75 cm 16-17 0065972 0061207
2.0 mm JET-FIT 82 cm 13-15 0061956
2.0 mm JET-FIT 82 cm 16-17 0065971 0060709
2.0 mm JET-FIT 75 cm UREA 16-17 0062323
2.0 mm JET-FIT 82 cm UREA 16-17 0066674 0061833
2.0 mm narrow 64 cm 9-12 0028634
2.0 mmnarrow(equipped with a detachable cassette hub)
64 cm 9-12 0070234
2.0 mm narrow 75 cm 9-12 0028635
2.0 mm narrow 80 cm 9-12 0061449
2.0 mm Top wheels 0036752
Saw bars and accessories
* Not for sale in South- and North-America
9190
SProCKeTS
No. of teeth PonSSe gB oregon oPen drive wheel
9 (3/4” ketju) 0065688 0044349
10 0036755 0044350
11 0036747 0044353
12 0036748 0044352
13 *P8667 0061871 0044351
14 *P11710 0061874
15 0061872 0036744
16 P13252
17 230713 0061873
*Mushroom-shaped model (used with chain tensioner + small saw motor)
9190
Harvester Products
Saw Bar FaSTening
Description No.
Fastening screw, regular bar P19842
Fastening screw, JET-FIT bar P26317
JET-FIT stop screw 231069
Nordlock 0060177
Hex nut, low 0058402
Hex nut, new thick 0064810
Saw Chain rollerS
Description PonSSe
2.0 mm 0065976
2.0 mm HX 0067866
Description oregon
2.0 mm HX 0039073
Description STihl
1.6 mm 0039069
2.0 mm 0061425
2.0 mm Magnum 0064749
CUT-To-lengTh
No. of links PonSSe hX
76 0067863
77 0067884
78 0067864
79 0067885
87 0067886
88 0067865
89 0067887
90 0067888
97 0067867
No. of links oregon 2.0 mm
76 00390731
86 0066485
87 00390732
89 00390733
No. of links STihl 1.6 mm
86 0062092
87 0062091
89 0062548
94 0062090
SharPening angleS
a B d
*16h*18h, 18hX
7/32” 5.5 mm7/32” 5.5 mm
35°35°
10°10°
.050” 1.3 mm
.050” 1.3 mm
92 93
0043951
0070509
Chain CoUPlerS
Description oregon 1.6 mm
Male 0043980
Female 0043990
Description oregon 2.0 mm
Male 0061130
Female 0066910
Description oregon 18x
Male 0066563
Female 0066910
No. of links STihl 2.0 mm
76 0064745
77 0065243
78 0064746
86 0062089
87 0062088
88 0065244
89 0062547
90 0062749
94 0062087
95 0064747
97 0064748
100 0066488
Saw Chain MainTenanCe
Description No.
Chain sharpener 220V 0043950
Sharpener with pneumatic clamp 0057914
Automatic sharpener 0067133
Chain splitter 0044340
Mandrel 0043995
Chain splitter anvil 0060974
Riveter 0044330
Riveter anvil 0043996
Die/tip 0039074
Shaping tool for a sharpening wheel 0071421
Grinding stone 0071482
Arm return spring 0043951
Arm return spring 0070509
Grinding wheel, 145X4,7X22 32660 0028747
Grinding wheel, 145X7,9X22,3 32902 0067084
Description STihl 1.6 ja 2.0 mm
Male 0064174
Female 0064174
Description STihl magnum
Male 0064878
92 93
Harvester Products
harveSTerhead o-ring SeTS
Description No.
H60 / H60e 0063240
H53 / H73 / H73e 0063241
eleCTriC ConneCTor KiT, h-SerieS harveSTerheadSDescription No.
Electric connector kit, H-series harvesterheads 0070091
STUMP TreaTMenT PUMPS
Description No.
Stump treatment pump for filling jabsco 0061282
Gasket set for refuelling pump 0065933
Stump treatment piston pump P19775
Gasket set for injection pump NH40590-05
Saw Chain lUBriCaTion PUMPS
Description No.
Earlier model, between hoses 513B06
Square model 513B12
Opti oil, with stronger spring 0063191
O-ring seal 0013813
Support rings 0027720
Spring 0026255
Spring, opti oil 230859
Suction strainer 0035419
Suction strainer, opti oil 0057916
Proportional, 550/650 AM01111
Description No.
Grinding wheel, 32660P/N 145X4,7X22,2 OREGON 0070014
Grinding wheel, 150X4,7X16 black 0071611
Grinding wheel, 150X4,0X16 white 0067134
Grinding wheel, CBN148/16 diamond wheel 0071612
Grinding wheel, 150X4X16 blue 0071614
94 95
h60/h60e
Description No.
Diameter sensor, 1000 meassuring device 161644
Diameter sensor, hall P32211
Diameter sensor, reconditioned P32211V
Tilt/earlier saw limit sensor 0064957
Saw limit sensor 8 mm 0064956
Length sensor 4 mm 0026901
Length sensor fastener 4 mm 0043136
Length sensor hall 25 pulses 0061188
Length sensor hall 75 pulses 0066565
Saw sensor with wire 0067649
Saw sensor intermediate cable 0070361
h53
Description No.
Diameter sensor, 1000 meassuring device 161644
Diameter sensor, hall P32211
Diameter sensor, reconditioned P32211V
Tilt sensor 0064957
Saw limit sensor 0064956
Length sensor 25 pulses 0043137
Length sensor 75 pulses 0062838
Saw sensor with wire 0067649
Saw sensor intermediate cable 0070361
Sensors
how to connect sensors
94 95
Harvester Products
h73
Description No.
Diameter sensor, 1000 meassuring device 161644
Diameter sensor, hall P32211
Diameter sensor, reconditioned P32211V
Tilt sensor 0064957
Saw limit sensor 0064956
Length sensor 25 pulses 0043137
Length sensor 75 pulses 0062838
Saw sensor with wire 0067649
Saw sensor intermediate cable 0070361
h73e
Description No.
Length sensor hall 25 pulses 0061188
Length sensor hall 75 pulses 0066565
Measuring sensor housing grease
0061160
Saw sensor with wire 0067649
Saw sensor intermediate cable 0070361
550 / 650
Description No.
Diameter sensor 0065276
Tilt sensor 0064957
Tilt sensor complet PS0383
Sax limit sensor 18 mm 0064957
Lenght sensor 3WD 0065276
h5 / h6 / h7 / h8
Description No.
Length sensor 0071296
Sensor tester 1630177
Saw sensor with wire CT chain tensioner
0067649
Saw sensor intermediate cable CT chain tensioner
0070361
Saw sensor, CT+ chain tensioner 0068418
Saw sensor intermediate cable, CT+ chain tensioner
PS0836
Front knife sensor with connectors PS0814
Front knife sensor 0070659
Diameter sensor for feed rollers H6 / H7 / H8
PS0630
Diameter sensor for feed rollers H5 PS0678
Tilt sensor 0068420
96 97
MUlTiPole CaBleS
Description No.
34-pole, grey 0057325
6-pole, 2x(2x1,5) 2x0,5 0061340
6-pole, 110 Ohm 0062606
TerMinal BloCKS
Description No.
4.0 mm, grey 0056172
2.5 mm, blue 0017305
1.5 mm, red 0017307
1.0 mm, yellow 0017310
0.75 mm, white 0017306
0.5 mm, orange 0017308
0.25 mm, light blue 0017309
End sleeve bag, ARCNET Containing the tools and instructions required for connecting Arcnet cables. For cables 0057325 and 0057609.
1631514
End sleeve bag, ARCNET Containing the tools and instructions required for connecting Arcnet cables. For cables 0061340 and 0062606.
0072980
SenSor TeSTer
Description No.
Sensor tester 1630177
NOTE: verify the suitability of the cable from the salesperson
NOTE! ask the Parts Salesperson to check
the suitably of the sensor.
Description No.
Lenght sensor 2WD 18 mm (4 PCS/head) 0064957
Lenght sensor 2WD complett (incl. connectors) PS0409
Lenght sensor HALL 25 pulses 0061188
Lenght sensor HALL 75 pulses 0066565
Saw position sensor 0065276
Saw sensor with wire 0067649
Saw sensor intermediate cable 0070361
96 97
Harvester Products
o-ring Below valve
Description No.
Nylon 00571701
90 shore 0057170
70 shore 0038185
Saw oPeraTing valve, new Model
Description No.
Saw operating valve, large 0038208
Seal set 0038209
Pilot valve cartridge 0057254
Pilot valve coil 0057263
Main cartridge 0057253
3-waY valveS
Description No.
Proportional pilot valve 0065449
Directional valve 0033472
Tilt lock valve 0065538
Tilt lock valve’s coil 0066682
Flow diSTriBUTion CarTidge
Description No. No.
Old P26004
New H60 601124 –> P20194
H60e 64715 –> P20194
roTaTing ConneCTor
Description No.
1 inch 0047860
3/4 inch 0062410
98 99
Measuring wheels
h53 and h73
Description No.
Milled, broad, conventional 230096
Double row, low spike 230557
Single row, broad spike 220221
Single row, high and broad spike 230491
Single row, high spike 230724
Single row, high spike 230433
Full wide, 32-tooth 230360
Double row, high spike 230432
Welded P16297
h60 / h73e
Description No.
Milled, broad, conventional 510B07
Triple row 500349
Double row 500879
Single row 510B13
Assembled measurement wheel P18936
Loose gear ring for assembled measurement wheel P18247
Ready assembled gear ring for P18136 measurement wheel P18602
roTaTing ConneCTor, TaiMi
orFS
Description No.
3/4" ORFS MALE-MALE 0071461
3/4" ORFS MALE, SWIVEL CARTRIDGE 0071463
1" ORFS MALE-MALE 0071462
1" ORFS MALE, SWIVEL CARTRIDGE 0071464
roTaTing ConneCTor, indeXaTor
Description No.
1/2’’ 0062883
1 1/4” 0066914
BSP 1/4U-1/4S 0065819
roTaTing ConneCTor, TaiMi
BSP
Description No.
3/4" BSP MALE-MALE 0070142
3/4" BSP MALE, SWIVEL CARTRIDGE 0068179
1" BSP MALE-MALE 0068178
1" BSP MALE, SWIVEL CARTRIDGE 0069569
1 1/4" BSP MALE, SWIVEL CARTRIDGE 0070140
98 99
Harvester Products
MeaSUring wheel PaCKage
Description No.
H73e (Limited Aggressive) 0066373
H73e (Aggressive) 00663731
H73 (Wide 32 Teeth) 0066376
H60 (Limited Aggressive) 0066378
H53 (Maritime Pine) 0066381
H5 0071490
H6 / H7 / H8 0067712
h7/h8
Description No.
Gear ring P19254
SUPPorT wheelS h60
Description No.
Conventional two-row with spikes 500B2013
Conic with spikes 500506
SUPPorT roller aSSeMBlieS
Description No.
Cone with 9mm spikes, incl. 500506 support roller 500720
Trad, two-row with spikes, incl. 50082013 support roller 500B62
Bearings
h53/h73
Description No.
For measuring wheel 0016140
For saw with manual tensioning 0059104
For saw with chain tensioner 0069196
h60
Description No.
For feed rollers 0043340
For support wheel 0043340
For measuring wheel 0043340
For saw with manual tensioning 0059104
For saw with chain tensioner 0069196
Description No.
Milled, two bearings 500B2004
Conic with flat spikes P11580
Tiprle-row with spikes P15818
100 101
BUShing SeTS
Description No.
H53 0063231
H60 0063230
H73 0063232
H73e 0067217
H5 0072717
H6 0070214
H7 0067218
H8 0067219
rUBBer PadS
Description No.
For cradle H60, H53, H73 0026977
For cradle H60, thick 0026972
ChainS
Description No.
Feed roller chain, H60 0043175
Chain coupler 0043176
For diameter sensor, 23 links 0043132
For diameter sensor, 27 links 230255
SPringS
Description No.
For diameter sensor, 185 mm 0043134
For diameter sensor, 185 mm, 150 mm 0055040
For diameter sensor, 185 mm, 140 mm 0061010
For diameter sensor, 185 mm, 135 mm 0064485
For measuring wheel, H60 hook 0045032
For measuring wheel, H60 thin, H73 extra 0056238
For measuring wheel, H60 thick 0057866
For measuring wheel, H53&H73 0055202
h5
Description No.
For measuring wheel 0016140 0016071
For saw, CT+ P28549
h6/h7/h8
Description No.
For measuring wheel 0063490
For the saw, manual chain tensioner 0059104
For the saw, CT chain tensioner 0069196
For saw, CT+ P28549
100 101
Harvester Products
h60/h60e
Description No.
Upper Knife Welded, Narrow 501B0102
Welded, Broad 501B0101
Support plate
For upper knife 501B0101 500199
Front Knives Long Bow
Cast, Left P9183
Cast, Right P9180
Welded, Left P21939
Welded, Right P21933
Front Knives Short bow
Welded, Left 504C01
Welded, Right 503C05
Rear Knife with Colour Marking P17146
w/o Colour Marking P16068
delimbing knives
MeaSUring Tool
Description No.
For adjusting the delimbing knife’s cut-ting angle ST0350
Sharpening of the delimbing knives
102 103
h73 / h73e
Description No.
Upper Knife Welded, Old Model 230059
Welded, 73245- P15607
Support plate
For front knife P1560773245- P15609
Upper Knife
Welded740162- P17633
Support plate
For front knife P17633740162- P17634
Front Knives Cast, left AM00339
Cast, right AM00340
Rear Knives
Welded, left with colour marking P11899
Welded, right P8881
h53
Description No.
Upper Knife Welded, New Model P17256
Support plate For upper knife P17256 P16918
Front Knives Cast, left AM00274
Cast, right AM00215
Rear Knives
Welded, with colour marking P14101
Welded, right AM02040
rear KniveS h73e
Description No.
Welded, left, without colour marking 740549- AM00351
Welded, right 740549- AM00350
Welded HD, left 740865- AM01311
Welded HD, right 740865- AM02208
h5
Description No.
Upper Knife
Bolt-on, welded, 480001-6 P35622
Bolt-on, welded, 480007- P39845
Front Knives Casted, left, 480016- AM02938
Casted, right, 480016- AM02937
Rear Knives
Welded, left with colour marking, 480016- P41525
Welded, right, 480016- AM02805
h6
Description No.
Upper Knife
Bolt-on, welded, 670001-52 P27808
Bolt-on, casted, 670053- P32235
Front Knives Left Casted, 670001- AM01569
Right Casted, 670001- AM01568
Rear Knives
Welded, left with colour marking, 670001-152 AM01162
Welded, left with colour marking, 670153- AM02443
Welded, right, 670001- AM01164
102 103
Harvester Products
h8
Description No.
Upper Knife
Bolt-on, welded, 830001-34,36-42 P18798
Bolt-on, welded, >830035<, 43- P26478
Bolt-on, casted, 830100- P31635
Front Knives Left Casted, 840046- AM00874
Right Casted, 840046- AM00875
Rear Knives
Welded, left with colour marking, 830001-50 P18756
Welded, left with colour marking, 830050- AM01009
Welded, left, without co-lour marking, 830044-91 AM01001
Welded, left, without co-lour marking, 830092- AM02851
Welded, right, 830001-91 P18762
Welded, right, 830092- AM02849
h7 & h7eUCa
Upper Knife
Description No.
Bolt-on, welded 770001- P18798
Bolt-on, welded 770081- P26478
Bolt-on, casted 770613- P31635
Bolt-on, welded, Euca 780001- P38196
Bolt-on, welded, Euca, optional 780001- P38206
Front Knives
Description No.
Left Casted 770001- AM01569
Right Casted 770001- AM01568
Left Casted, Euca 780014- AM01993
Right Casted, Euca 780014- AM01992
Left Casted, Euca 780014- AM02394
Right Casted, Euca 780014- AM02393
rear KniveS h7 / h7eUCa
Description No.
Welded, left with colour marking 770001- P18756
Welded, left, without colour marking 770085- AM01001
Welded, left, without colour marking 770543- AM02851
Welded, right 770085- P18762
Welded, right 770543- AM02849
Welded, left, Euca 780001- AM01745
Welded, right, Euca 780001- AM02571
Welded, left, Euca, optional 780001- AM02015
Welded, right, Euca, optional 780001- AM02570
ColoUr MarKing ParTS
Description No.
Compressed air, colour 6mm screw 511A1007
Compressed air, colour 2 holes 220258
Compressed air, colour 1 hole 220257
Hydraulic, backstroke, assembly 0063649
For Hultdins colour marking block 0067251
Colour nozzle cleaning needle ST0376
Assembled colour marking pump 0067785
Colour marking tank cap 0067425
For disconnecting the colour marking valve block’s check valve ST0022
104 105
log gUide PlaTe
Description No.
H60 left P18011
H60 right P18012
H60e left P18067
H60e right P18068
BoTToM wear PlaTe
Description No.
H60/H60e P21657
H6 P30686
Feed MoTorS
SaUer danFoSS
oMT
Description No.
250HD H60/H60e Track feed 0047894
315HD H60/H60e Roller feed 0067104
400HD H73/H73e bottom engine 0066107
500HD H73e bottom engine 740608- 0064556
oMTw
Description No.
250 550/650/750 0065256
315 550/650/750 0065259
400 550/650/750 0065263
500 650/750 0065266
TMT
Description No.
250 H5 bottom engine 0059880
315 H6/H7 Euca bottom engine 0058856
400 H8/H10 bottom engine 0063209
oMv
Description No.
500 H53 bottom engine 0061081
630HD H53 bottom engine/H60bw/H73 Side engine 0066980
800HD H53/H73e Side engine 53001/54001/740608- 0067109
oMvw
Description No.
630HD H53e bottom engine 54001- 0067110
TMvw
Description No.
800 0066652
SaMPo hYdraUliCS
Description No.
410 0065799
410 550 0065275
513 550 0065272
667 550 0065270
104 105
Harvester Products
BBC02
Description No.
509 650 0065802
509 650 0065765
642 650 0065282
783 650/750 0065277
1018 650 0065279
reXroTh
rexroth MCr05
Description No.
520 H6/H7 Euca Side engine 0066769
620 H7/H8 Side engine 0072340
750 H7/H8 Side engine 0064831
ALSO OTHER FEED MOTOR COMPONENTS
PonSSe CT+ Chain TenSioner PaCKage
Description No.
Chain tensioner package 0071092
Seal set 0072725
Saw MoTorS
Description No.
VOAC PARKER F11/10 0043190
STEFA 0043202
Key 0043193
VOAC PARKER F11/19 0043180
STEFA 0067630
Key 0043293
Description old new
VOAC PARKER F12/30 0057214 0066668
STEFA VO3797195 0066669
O-ring for stefa flange VO974584 VO974584
Key VO909306 VO909306
Seal Set F12/30 VO3793492 0064806
ALSO SEALS, SPARE PARTS AND REPLACEMENT MOTORS
Description No.
CT+ Parker F12-030 0074368
Shaft seal (stefa) 0066669
Shaft seal (stefa) teflon 0067117
O-ring VO974584
Key VO909306
106
PlaneTarY gearS
Description No.
RR500 0048050
RR750 0048052
RR510 with brake 0070588
RR510 without brake 0071520
RR810 SI 0070643
Slewing MoTorS
Description No.
OMTS 160HD
Crane slew FOX/C22 0067605
OMTS 200HD
Crane slew BEAR/C55/C6 0067106
OMTS 250HD
Crane slew HN125/HN200/C2/C33/C4/L220 0067107
OMTS 315HD 13 teeth 0067108
ERGO tulossa
PRODUCTIVITY, ERGONOMICS AND EASE OF MAINTENANCE
PONSSE ERGO 2015
THE NEW PONSSE ERGO of Model Series 2015 offers impressive efficiency, stability and ergonomics – it has been designed according to customers’ wishes.
THROUGH THE NEW EU STAGE IV ENGINE offering more torque than ever before and double-circuit hydraulics implemented with a faster transmission, the PONSSE Ergo produces superior performance which no other harvester of the same size category can reach. The upgraded drive transmission offers irresistible tractive force and accurate control even on the steepest slopes. Increased comfort and efficiency in everyday work are also offered by the most ergonomic controls available on the market and excellent visibility.
MAINTENANCE IS EASY through correctly positioned components and service points. The new technology and the improved hydraulics have enabled the service intervals to be extended up to 900/1,800 hours. This results directly in more efficient operating hours and lower maintenance costs.
THE PONSSE 2015 SERIES is a strong indication of the significance of customer cooperation in the product development of forest machines. It is a model series designed together with users that does not compromise on the usability, productivity or serviceability of the machine.
A logger’s best friend www.ponsse.com
109108
Glide pad sets .......................................................... 109For harvester cranes .....................................................109For forwarder cranes .....................................................109Complete chain sets .................................................. 109For harvester cranes .....................................................109For forwarder cranes .....................................................109Rotators .................................................................. 110Indexator for forwarders .................................................110Indexator for harvesters .................................................110Compatibility chart of rotators and swing dampers ...... 110Compatibility chart of rotators and swing dampers ...... 111Grapples .................................................................. 111PONSSE SG grapples ......................................................111PONSSE grapples ..........................................................111Vahva ...........................................................................113PONSSE SG energy wood grapples ...................................113PONSSE energy wood grapples ........................................113Hultdins........................................................................113Loglift ..........................................................................113Cranab .........................................................................113Grapple bushing sets ......................................................113
Crane Products
109108
Crane ProduCts
Glide pad sets
For harvester cranes
Description No.
HN125 25323➠ 0063214
HN200 0063215
C2 320001–320089, C4 310001–310626 0071491
C2 320090–320091, C4 31627–31641 0073292
C2 320092➠, C4 31642➠ 0073293
C55 0071411
C5 0075031
C6 0071409
C22, C33 0071410
C22+ C44, C44+, C50 0073183
aLso InDIvIDUaL GLIDe PaDs anD hoLDers
For ForwarDer cranes
Description No.
K80M, K90M, K100M 0063211
K70M+ 0063212
K70M / K75M 0063213
K90+, K100+, K90 DUAL+ 0067766
complete chain sets
For harvester cranes
Description No.
HN125 AM02124
C2, C4, HN200 AM02125
For ForwarDer cranes
Description No.
K70M AM01614
K70M+ AM01608
K80M AM02122
K90M, K90DUAL AM02122
K100M AM02122
K75 AM01624
aLso InDIvIDUaL chaIns anD chaIn coMPonents
110 111
ForwarDers swing damper
00
33
24
2
Sw
ing 8
0/8
0
D4
5/3
5
0056253
D
ual Sw
ing
80/1
00 D
45/4
5
00
60
35
2
Sw
ing 8
0/1
00
D
45
/45
00
62
85
3
Sw
ing 8
0/1
00
M
PB
1-8
0
21
00
68
8
0/1
00
D
45
/45
rota
tor
0068181 GV12S X X
0068185 G121 X
0068187 GV12S-2 X X
0068190 GV12-2 X
0033670 MR8AF
0056174 MR10AF
0033671 MR8AMF X
0033665 MR10AMF X
compatibility chart of rotators and swing dampers
InDexator For harvesters
Description No.
AV12S 0068182
AV14SA 0068183
AV17S 0068188
H122 0068184
H122 swing damper 0063004
H132 0068189
H172 0068186
InDexator For ForwarDers
Description No.
GV12-2 0068190
GV12S-2 0068187
GV12S 0068181
GV17S 0070551
G121 0068185
G121 swing damper 0062853
rotators
When using rotators 0068182 (AV12S), 0068184 (H122) and 0068189 (H132) with H53/e, connectors 0068388 must be used.
110 111
Crane ProduCts
harvesters swing damper
00
48
08
6
D4
5/3
5
00
48
07
2
D4
5/4
5
00
60
44
2
Dual Sw
ing
D4
5/4
5
00
63
00
4
MPB
2
00
65
51
5
MPB
2-2
0068182 AV12S X X
0068183 AV14SA X X
0068184 H122 X
0068186 H172 X X
0068188 AV17S X X
0068189 H132 X X
0033670 MR8AF
0056174 MR10AF
0033671 MR8AMF X
0033665 MR10AMF X
compatibility chart of rotators and swing dampers
Grapples
Ponsse sG GraPPLes
Description No.
PONSSE SG260 LP 0067170
PONSSE SG260S 0067171
PONSSE SG360 LP 0066791
PONSSE SG360S LP 0066792
PONSSE SG420 LP 0067187
Ponsse GraPPLes
Description No.
25 0062551
28 0057847
28 HD 0061783
35 0058689
35 HD 0060611
40 0061508
55 0061509
113
High performanceduring long time
tHe world´s largest selection of rotatorsIndexator´s product range includes the entire scale of rotators in different sizes and models adapted to a series of usage areas.
Indexator’s rotators contribute to a high level of productivity and good total economy.They are compact and robust – the materials and components are care-fully selected. The rotators are equipped with heavy duty bearings and are hydraulically balanced, which gives them long service intervals and long lifetime.
indexator.com
113
Crane ProduCts
vahva
Description No.
Vahva 27B 0067204
Vahva 33B 0067205
Vahva 38B 0067206
Vahva 42B 0067207
Ponsse enerGY wooD GraPPLes
Description No.
025R 0062666
028R 0062667
035R 0062668
040R 0062669
055R 0062670
Ponsse sG enerGY wooD GraPPLes
Description No.
PONSSE SG260R LP 0067185
PONSSE SG360R LP 0067186
hULtDIns
Description No.
SG II 260A 0068305
SG II 300A 0068306
SG II 360A 0068139
SG II 420A 0068307
LoGLIFt
Description No.
FX 26 0062762
FX 36 0062753
cranaB
Description No.
FORTE G28 0060874
FORTE G36 0060870
GraPPLe BUshInG sets
Description No.
HULTDINS 260 0065966
HULTDINS 360 0066911
HULTDINS 360S 0066912
HSP 028 0065965
HSP 035 0065965
HSP 035HD 0066671
HSP 040 0065965
HSP 040HD 0066672
High performanceduring long time
tHe world´s largest selection of rotatorsIndexator´s product range includes the entire scale of rotators in different sizes and models adapted to a series of usage areas.
Indexator’s rotators contribute to a high level of productivity and good total economy.They are compact and robust – the materials and components are care-fully selected. The rotators are equipped with heavy duty bearings and are hydraulically balanced, which gives them long service intervals and long lifetime.
indexator.com
115
HigH Quality tecHnology
Hose assemblies
Spiral hoses
Wire braided hoses and spiral hoses
Piping accessories
Quick couplings
BSB-, JIC-, ORFS-fittings and adaptors
Tube fittings
For decades, Hytar oy has been a remarkable manufacturer and importer of components and systems of oil and water hydraulics.
Hytar Oy, JyväskyläItä-Päijänteentie 57FI-40320 Jyväskylä, FinlandTel: +358 14 447 4477Fax: +358 10 613 7730
Hytar Oy, JyväskyläItä-Päijänteentie 57FI-40320 Jyväskylä FinlandTel: +358 10 613 7000Fax: +358 10 613 7730
115
Hydraulics accessories
HigH Quality tecHnology
Hose assemblies
Spiral hoses
Wire braided hoses and spiral hoses
Piping accessories
Quick couplings
BSB-, JIC-, ORFS-fittings and adaptors
Tube fittings
For decades, Hytar oy has been a remarkable manufacturer and importer of components and systems of oil and water hydraulics.
Hytar Oy, JyväskyläItä-Päijänteentie 57FI-40320 Jyväskylä, FinlandTel: +358 14 447 4477Fax: +358 10 613 7730
Hydraulic fittings ...................................................... 116Indicating the sizes of fittings .................................... 116Double fitting .................................................................117Connecting fitting ...........................................................117Lead through fitting ........................................................117Turning angular fitting .....................................................117Reducing fitting .............................................................117Extension fitting .............................................................117Angle fitting ..................................................................117T-fitting .........................................................................117T-turning T-fitting ............................................................118RSI-fitting ......................................................................118Measuring fitting ...........................................................118Muff ............................................................................118Male plug .....................................................................118Female plug ..................................................................118Quick connector ............................................................118Double fittings .......................................................... 119R1/8” .........................................................................119R1/4” .........................................................................119R3/8” .........................................................................119R1/2” .........................................................................119R3/4” .........................................................................119R1” .............................................................................120R11/4” .......................................................................120R11/2” .......................................................................120R2” .............................................................................120Connecting fittings .................................................... 120R1/8” .........................................................................120R1/4” .........................................................................120R3/8” .........................................................................120R1/2” .........................................................................121R3/4” .........................................................................121R1” .............................................................................121R11/4” .......................................................................121R11/2” .......................................................................121Reducing fittings....................................................... 121R1/8” .........................................................................121R1/4” .........................................................................121R3/8” .........................................................................121R3/4” .........................................................................121R1/2” .........................................................................122R1” .............................................................................122R11/4” .......................................................................122Extension fittings ...................................................... 122R11/4” .......................................................................122Lead through fitting .................................................. 122R1/4” .........................................................................122R3/8” .........................................................................122R1/2” .........................................................................122R3/4” .........................................................................122Angle fitting ............................................................. 123R1/4” .........................................................................123R3/8” .........................................................................123R1/2” .........................................................................123R3/4” .........................................................................123R1” .............................................................................123Turning angular fitting ............................................... 123R1/4” .........................................................................123R3/8” .........................................................................123R1/2” .........................................................................124R3/4” .........................................................................124R1” .............................................................................124R11/4” .......................................................................124R11/2” .......................................................................124
T-fittings .................................................................. 124R1/4” .........................................................................124R3/8” .........................................................................124R1/2” .........................................................................124R3/4” .........................................................................124R1” .............................................................................124T-turning T-fittings .................................................... 125R1/4” .........................................................................125R3/8” .........................................................................125R1/2” .........................................................................125R3/4” .........................................................................125R1” .............................................................................125R11/4” .......................................................................125R11/2” .......................................................................125RSI-fittings ............................................................... 125R1/8” .........................................................................125R1/4” .........................................................................125R3/8” .........................................................................126R1/2” .........................................................................126R3/4” .........................................................................126R1” .............................................................................126R11/4” .......................................................................126R11/2” .......................................................................126R2” .............................................................................126ORFS-fittings ............................................................ 126Double fittings ...............................................................126Connecting fittings .........................................................126Reducing fittings ............................................................127Lead through fitting ........................................................127Angle fitting ..................................................................127ORFS Turning angular fitting ...................................... 1271/4” ...........................................................................1273/8” ...........................................................................1271/2” ...........................................................................1283/4” ...........................................................................1287/8” ...........................................................................1281” ..............................................................................1281 1/4” ........................................................................1281 1/2” ........................................................................128M16X1,5 .....................................................................128M18X1,5 .....................................................................128T-fittings .......................................................................128T-turning L-fittings ..........................................................129Measuring fittings .................................................... 129Measuring fitting ...........................................................129Straight ........................................................................12945° .............................................................................12990° .............................................................................129Adjustment nipple M6-M12 .............................................129Female plug ..................................................................129Male plug .....................................................................130Muff ............................................................................130Quick connector ............................................................130Grease nipples ..............................................................130Usit Seal ring ................................................................131Usit Seal ring set (25 pcs) ..............................................131Hose shield ...................................................................131
Hydraulics accessories
117116
Example 1
The size of fittings is always indicated as follows:
1. Thread type
2. Thread size
3. Other indications: external thread (U), internal thread (S) and turning capacity (/SU)
4. The angle is indicated after the size information.
5. Any forged fittings are indicated as the last piece of information (indication T).
Indicating the sizes of fittings
Turning T-FITTING: R3/4U-R3/4S/SU-R3/4U
R3/4U ➔ R = R-thread, 3/4 = 3/4 inches, U = external thread R3/4S/SU ➔ R = R-thread, 3/4 = 3/4 inches, S = internal thread, /SU = turning
Example 2
Forged 90° angle fitting: R1/4U-R1/4S 90° T
R1/4S 90° T ➔ R = R-thread, 1/4 = 1/4 inches, S = internal thread, 90° = 90° angle fitting, T = forged.
Hydraulic fittings
Using original Ponsse hydraulic fittings, you can ensure that the original dimensions remain un-changed in challenging sites. When designing connections and routes, minimised flow losses are taken into consideration in addition to reliability and installation. By using Ponsse fittings and hos-es, you can secure flexible routing and easy installation. Fittings intended for specific sites guarantee the tightness and reliability of the hydraulics.
117116
Hydraulics accessories
• Lead through fittings differ from standard fittings in terms of length.
• The fitting is forged if the final letter is T.• The BSPT indication which replaces the thread
type marking refers to a cone-like BSP thread.
• The /SU indication refers to the branch where the fitting can be turned using a tightening nut.
• The second indication refers to the size of the centre branch.
• Example: R3/8U-R3/8U-R3/8U
Lead tHrougH fIttIng angLe fIttIng
turnIng anguLar fIttIng t-fIttIng
• Always an external and internal thread. • Always with internal threads.
ConneCtIng fIttIng extensIon fIttIng
• The thread type may vary, but the nominal size of both ends is the same.
• Always an external thread at both ends.
• An external thread at both ends• Always a different thread size at both ends.
doubLe fIttIng reduCIng fIttIng
118 119
• The second indication refers to the size of the centre branch.
• The /SU indication refers to the branch where the fitting can be turned.
• Always an external thread at one end and an in-ternal thread at the other end
• The external thread is always indicated first.
t-turnIng t-fIttIng
rsI-fIttIng
MeasurIng fIttIng
Muff
• Male plugs always have external threads.• There are two types of male plugs: Allen and hex
head plugs• In the size description, the ALLEN indication refers
to an Allen plug and the HEX HEAD indication refers to a hex head plug.
• Female plugs always have internal threads.
• The size is indicated first, followed by the type (fe-male or male connector): In the size description, the FEMALE indication refers to a female connec-tor and the MALE indication refers to a male con-nector.
MaLe pLug
feMaLe pLug
QuICk ConneCtor
• An internal thread at both ends.
118 119
Hydraulics accessories
r3/8”
Size No.
R3/8-R3/8 0015503
R3/8-U9/16JIC 0015727
R3/8-U7/8JIC 0055299
R3/8-U7/16JIC 0065245
R3/8-U1/2JIC 0034199
R3/8-NPTF3/8 0015776
R3/8-M20X1,5 0015738
R3/8-M18X1.5 0015737
R3/8-M16X1,5 0015740
r3/4”
Size No.
R3/4-R3/4 0015479
R3/4-U3/4JIC 0034181
R3/4-U15/16JIC 0065252
R3/4-U13/16JIC 0058343
R3/4-U11/16 JIC 0067144
R3/4-NPTF3/4 0015867
R3/4-M26X1.5 0041520
R3/4-BSPT3/4 0015487
R3/4-11/16JIC 0015859
r1/2”
Size No.
R1/2-R1/2 0015842
R1/2-U9/16JIC 0000356
R1/2-U7/8JIC 0058340
R1/2-U7/16JIC 0000337
R1/2-U11/16JIC 0061322
R1/2-NPTF3/8 0034223
R1/2-M26X1,5 0015732
R1/2-M22X1,5 0058267
R1/2-M20X1.5 0015739
R1/2-M18X1.5 0022643
R1/2-M16X1,5 0060167
R1/2-BSPT1/2 0015834
double fittings
r1/8”
Size No.
R1/8-R1/8 0060058
R1/8-U7/16JIC 0034207
R1/8-M12X1,5 0015730
r1/4”
Size No.
R1/4-R1/4 0015735
R1/4-U9/16JIC 0021956
R1/4-U7/16JIC 0015719
R1/4-M16X1,5 0015736
R1/4-M14X1,5 0015731
R1/4-M12X1.5 0015726
Size No.
R3/8-M14X1.5 0015733
R3/8-BSPT3/8 0015511
120 121
r11/4”
Size No.
R11/4-R11/4 0033020
R11/4-U15/8JIC 0015439
R11/4-U15/16JIC 0000339
r11/2”
Size No.
R11/2-R11/2 0033025
R11/2-U17/8JIC 0022046
r1/8”
Size No.
R1/8U-R1/4S 0015633
R1/8U-R1/8S 0015634
r2”
Size No.
R2-R2 0059389
Connecting fittings
r1/4”
Size No.
R1/4U-R1/8S 0015586
R1/4U-R1/4S 0015750
R1/4U-R3/8S 0015578
R1/4U-U7/16S 0000326
R1/4U-R1/2S 0000068
R1/4U-JIC9/16S 0065766
R1/4U-U9/16S 0067146
r3/8”
Size No.
R3/8U-R1/4S 0015560
R3/8U-R3/8S 0015768
R3/8U-ORFS3/8S 0058854
R3/8U-R1/2S 0015552
R3/8U-U9/16S 0000376
r1”
Size No.
R1-R1 0033019
R1-U15/8JIC 0065253
R1-U15/8 UNF 0067776
R1-U15/16JIC 0015438
R1-U11/16JIC 0000359
R1-NPTF1 0015446
120 121
Hydraulics accessories
r1/2”
Size No.
R1/2U-R1/4S 0010263
R1/2U-R3/8S 0010264
R1/2U-R1/2S 0015826
R1/2U-R3/4S 0015529
r3/4”
Size No.
R3/4U-R1/2S 0015594
R3/4U-U11/16S JIC 0065821
R3/4U-R3/4S 0015495
R3/4U-R1S 0015602
R3/4U-1S ORFS 0067121
R3/4U-R11/4S 0061206
r1”
Size No.
R1U-R3/4S 0044170
R1U-U15/16S JIC 0066632
R1U-R1S 0000067
R1U-R11/4S 0000073
R1U-R11/2S 0066395
r11/4”
Size No.
R11/4U-R1S 0000072
R11/4U-R11/4S 0044175
r1/8”
Size No.
R1/8-R1/4 0015636
r1/4”
Size No.
R1/4-R3/8 0024398
R1/4-R3/8 L=87MM 0044870
R1/4-R1/2 0015644
R1/4-U3/4 JIC 0000391
R1/4-U3/4 0015720
r3/8”
Size No.
R3/8-R1/2 0015651
R3/8-R3/4 0015669
R3/8-U3/4JIC 0000354
R3/8-U3/4 0015721
r11/2”
Size No.
R11/2U-R11/4S 0055160
R11/2U-R11/2S 0000077
reducing fittings
r3/4”
Size No.
R3/4-M22X1,5 0064990
R3/4-U7/8JIC 0015729
R3/4-U11/16 0022055
R3/4-U15/16 0022054
R3/4-U15/16JIC 0015862
122 123
r1/2”
Size No.
R1/2-RK3/8 0015628
R1/2-R3/4 0015677
R1/2-U3/4JIC 0015818
R1/2-R1 0015685
r1”
Size No.
R1-R11/4 0015701
R1-R11/2 0024406
r11/4”
Size No.
R11/4-R11/2 0015702
r11/4”
Size No.
R1/4-R1/4 0015784
R3/8-R3/8 0015743
R1/2-R1/2 0015792
R3/4-R3/4 0055053
R1-R1 0022648
extension fittings
Size No.
R3/4-R1 0015693
R3/4-R11/4 0024414
R3/4-R11/2 0034231
r1/4”
Size No.
R1/4-R1/4 STRAIGHT 0021990
R1/4SU-R1/4 90° 0055123
r3/8”
Size No.
R3/8-R3/8 STRAIGHT 0021991
R3/8SU-R3/8 90° 0063731
r1/2”
Size No.
R1/2-R1/2 STRAIGHT 0042000
Lead through fitting
r3/4”
Size No.
R3/4-R3/4 STRAIGHT 0015480
3/4JIC-3/4JIC STRAIGHT 0066961
122 123
Hydraulics accessories
r1/4”
Size No.
R1/4U-R1/4S 45° T 0022647
R1/4U-BSPT1/4U 90° 0015875
R1/4U-R1/4S 90° T 0022649
R1/4U-U7/16U 90° 0000392
angle fitting
r1/2”
Size No.
R1/2U-R1/2S 45° T 0062056
R1/2U-R1/2S 90° T 0048260
R1/2U-R1/2U 90° 0015891
r3/8”
Size No.
R3/8U-R3/8S 45° T 0062053
R3/8U-R3/8S 90° T 0048259
R3/8U-R3/8U 90° 0015883
r3/4”
Size No.
R3/4U-R3/4S 45° T 0033005
R3/4U-BSPT3/4U 90° 0035857
R3/4U-R3/4S 90° T 0039961
r1”
Size No.
R1U-R1S 45° T 0033006
R1S/SU-R1/2U 90° T 0067590
R1U-BSPT1U 90° 0035856
R1U-R1S 90° T 0039960
r1/4”
Size No.
R1/4U/SU-R1/4U 45° 0015519
R1/4U/SU-R3/8U 45° 0015520
R1/4U/SU-U9/16U 45° 0065264
R1/4U/SU-R1/4U 90° 0044781
R1/4U/SU-R3/8U 90° 0015513
R1/4U/SU-U7/16U 90° JIC 0065269
R1/4U/SU-U9/16U 90° 0065297
R1/4U/SU-U3/4U 90° JIC 0000306
turning angular fitting
r3/8”
Size No.
R3/8U/SU-R3/8U 45° 0015521
R3/8U/SU-U9/16U 45° 0065265
R3/8U/SU-R1/4U 90° 0062116
R3/8U/SU-R3/8U 90° 0015512
124 125
r1/2”
Size No.
R1/2U/SU-R1/2U 45° 0015522
R1/2U/SU-R1/2U 90° 0044782
R1/2U-R3/8U/SU 90° 0067803
R1/2U/SU-U9/16U 90° 0065273
R1/2U/SU-U11/16U 90° 0065274
R1/2U/SU-U3/4U 90° 0065296
R1/2U/SU-U3/4U 90° 0000379
R1/2U/SU-U7/8U 90° 0066970
r3/4”
Size No.
R3/4U/SU-U11/16U 45° 0065268
R3/4U/SU-R3/4U 45° 0057185
R3/4U/SU-R1/2U 90° 0064017
R3/4U/SU-R3/4U 90° 0044785
R3/4U/SU-U11/16U 90° 0065295
r1”
Size No.
R1U/SU-R3/4U 45° 0067967
R1U/SU-R1U 45° 0033010
R1U/SU-R3/4U 90° 0065574
R1U/SU-R1U 90° 0044786
r11/4”
Size No.
R11/4U/SU-R11/4U 90° 0055159
r11/2”
Size No.
R11/2U/SU-R11/2U 90° 0066394
r1/4”
Size No.
R1/4U-R1/4U-R1/4U 0015909
r3/8”
Size No.
R3/8U-R3/8U-R3/8U 0015917
R3/8U-BSPT3/8U-R3/8U 0033011
r1/2”
Size No.
R1/2U-R1/2U-R1/2U 0015461
R1/2U-BSPT1/2U-R1/2U 0033012
t-fittings
r3/4”
Size No.
R3/4U-R3/4U-R3/4U 0015453
Size No.
R3/8U/SU-U9/16U 90° 0000393
R3/8U/SU-U9/16U 90° JIC 0065271
r1”
Size No.
R1U-R1U-R1U 0033001
124 125
Hydraulics accessories
r1/4”
Size No.
R1/4-R1/8 RSI 0044851
R1/4-R3/8 RSI 0022749
r1/4”
Size No.
R1/4S/SU-R1/4U-R1/4U 0062372
R1/4U/SU-R1/4U-R1/4U 0015516
R1/4U/SU-U9/16U-U9/16UJIC 0067145
R1/4U-R1/4S/SU-R1/4U 0062373
R1/4U-R1/4U/SU-R1/4U 0044783
t-turning t-fittings
r3/8”
Size No.
R3/8S/SU-R3/8U-R3/8U 0055221
R3/8U/SU-R3/8U-R3/8U 0015517
R3/8U/SU-U9/16U-U9/16UJIC 0067148
R3/8U-R3/8S/SU-R3/8U 0055273
R3/8U-R3/8U/SU-R3/8U 0015514
R3/8S/SU-R3/8U-R3/8U 0065999
r1/2”
Size No.
R1/2S/SU-R1/2U-R1/2U 0064018
R1/2U/SU-R1/2U-R1/2U 0015518
R1/2U/SU-U7/8JIC-U7/8JIC 0066971
R1/2U-R1/2U/SU-R1/2U 0015515
R1/2U-R3/4U/SU-R1/2U 0067455
R3/8S/SU-R3/8U-R3/8U 0065999
r11/4”
Size No.
R11/4U/SU-R11/4U-R11/4U 0061204
r3/4”
Size No.
R3/4S/SU-R3/4U-R3/4U 0057358
R3/4U/SU-R3/4U-R3/4U 0057773
R3/4U-R3/4U/SU-R3/4U 0044787
r1”
Size No.
R1U/SU-R1U-R1U 0059105
R1U-R1U/SU-R1U 0044788
R1S/SU-R1U-R1U 0058049
r11/2”
Size No.
R11/2U/SU-R11/2U-R11/2U 0059645
r1/8”
Size No.
R1/8-R1/4 RSI 0044850
rsI-fittings
126 127
r3/8”
Size No.
R3/8-R1/8 0062367
R3/8-R1/4 RSI 0022756
R3/8-R1/2 RSI 0022772
r1/2”
Size No.
R1/2-R1/4 RSI 0022814
R1/2-R3/8 RSI 0022764
R1/2-R1/2 RSI 0022816
R1/2-R3/4 RSI 0022721
r3/4”
Size No.
R3/4-R1/4 RSI 0034090
R3/4-R3/8 RSI 0022780
R3/4-R1/2 RSI 0022798
R3/4-R1 RSI 0022731
r1”
Size No.
R1-R1/2 RSI 0044192
R1-R3/4 RSI 0044190
r11/4”
Size No.
R11/4-R3/4 RSI 0055022
R11/4-R1 RSI 0044197
r2”
Size No.
R2-R11/4 RSI 0058639
r11/2”
Size No.
R11/2-R3/4 RSI 0055158
R11/2-R1 RSI 0044198
R11/2-R11/4 RSI 0061205
orfs-fittings
doubLe fIttIngs
Size No.
ORFS1/4-ORFS1/4 0072704
ORFS3/8-ORFS3/8 0072705
ORFS 1/2 0070085
ORFS 5/8 0070086
ORFS 3/4 0063692
ORFS 1 0067518
ORFS 1 1/4 0063514
ORFS 1 1/2 0070087
ConneCtIng fIttIngs
Size No.
ORFS1/4S-R1/4U 0071628
ORFS1/4S-R3/8U 0071754
ORFS3/8S-R1/4U 0071755
ORFS3/8S-R3/8U 0058854
ORFS3/8-U9/16U 0071626
ORFS1/2S-R3/8U 0071751
ORFS1/2S-R1/2U 0072707
ORFS3/4S-R3/4U 0072373
ORFS1S-R3/4U 0067121
ORFS1S-R1U 0072202
126 127
Hydraulics accessories
1/4”
Size No.
R1/4U/SU-ORFS 3/8 45° 0072529
R1/4U/SU-ORFS 9/16U 45° 0063435
R1/4U/SU-ORFS 9/16U 90° 0061919
R1/4/SU-ORFS 11/16U 90° 0063976
ORFS1/4U-U9/16U/SU 90° 0072223
3/8”
Size No.
R3/8U/SU-ORFS 1/4 45° 0072509
R3/8U/SU-ORFS 3/8 45° 0072624
R3/8U/SU-ORFS 9/16U 90° 0061959
R3/8U/SU-ORFS 11/16U 90° 0061942
R3/8U/SU-ORFS 13/16U 90° 0072284
ORFS3/8U-U9/16U/SU 90° 0061936
orfs turning angular fitting
reduCIng fIttIngs
Size No.
ORFS1/4U-ORFS3/8S 0072607
ORFS1/4U-ORFS1/2S 0072475
ORFS3/8-ORFS1/4 0072519
ORFS3/8U-ORFS1/4S 0072876
ORFS3/8U-ORFS1/2S 0061974
ORFS1/2-ORFS3/8 0063706
ORFS1/2U-ORFS3/4S 0072706
ORFS5/8-ORFS1/2 0067309
ORFS3/4-ORFS5/8 0072065
ORFS3/4U-ORFS1S 0064027
ORFS1U-ORFS11/4S 0064041
ORFS1 1/4-ORFS1 0063508
ORFS1 1/2-ORFS1 1/4 0072695
angLe fIttIng
Size No.
ORFS1/4U-ORFS1/4S 45° 0072708
ORFS1/4U-ORFS1/4S 90° 0061916
ORFS3/8U-ORFS3/8S 45° 0072709
Lead tHrougH fIttIng
Size No.
ORFS1/4-ORFS1/4 0061930
ORFS3/8-ORFS3/8 0062270
ORFS3/8U-ORFS3/8U-ORFS3/8U, T-fitting 0072701
ORFS3/8U-ORFS3/8U-ORFS3/8U, L-fitting 0072642
ORFS1/2-ORFS1/2 0063694
ORFS5/8-ORFS5/8 0062272
ORFS3/4-ORFS3/4 0062273
ORFS1-ORFS1 0063515
Size No.
ORFS3/8U-ORFS3/8S 90° 0061935
ORFS1/2U-ORFS1/2S 45° 0072539
ORFS1/2U-ORFS1/2S 90° 0063432
ORFS3/4U-ORFS3/4S 45° 0072710
ORFS3/4U-ORFS3/4S 90° 0071729
ORFS1U-ORFS1S 45° 0072650
ORFS1U-ORFS1S 90° 0068412
ORFS1 1/4U-ORFS1 1/4S 45° 0072802
128 129
7/8”
Size No.
U7/8U/SU-ORFS3/4 45° 0072262
1”
Size No.
R1U/SU-ORFS 1 1/16U 90° 0071765
R1U/SU-ORFS 1 3/16U 90° 0064759
R1U/SU-ORFS 1 7/16U 45° 0061926
R1U/SU-ORFS 1 7/16U 90° 0061977
ORFS1U-U1 5/16U/SU 90° 0072210
1 1/4”
Size No.
R1 1/4U/SU-ORFS1 1/4 45° 0072699
R1 1/4U/SU-ORFS1 1/4U 90° 0072793
R11/4U/SU-ORFS 1 7/16U 90° 0061931
ORFS1 1/4U-U1 5/8U/SU 90° 0072212
1/2”
Size No.
R1/2U/SU-ORFS 1/2 45° 0072443
R1/2U/SU-ORFS 11/16U 45° 0061921
R1/2U/SU-ORFS 11/16U 90° 0072283
R1/2U/SU-ORFS 13/16U 90° 0061928
R1/2U/SU-ORFS 1-14U 90° 0069100
R1/2U/SU-ORFS 1 3/16U 90° 0071902
3/4”
Size No.
R3/4U/SU-ORFS 1/2U 90° 0072269
R3/4U/SU-ORFS 5/8U 90° 0071546
R3/4U/SU-ORFS 3/4 90° LONG 0071665
R3/4U/SU-ORFS 1 3/16U 45° 0064135
R3/4U/SU-ORFS 1 3/16U 90° 0062274
R3/4U/SU-ORFS 1 7/16 45° 0068817
R3/4U/SU-ORFS 1 7/16U 90° 0068413
ORFS3/4U-U11/16U/SU 90° 0061940
ORFS3/4U-U1 5/16U/SU 90° 0072207
M16x1,5
Size No.
M16X1,5U/SU-ORFS1/4U 90° 0072549
M18x1,5
Size No.
M18X1.5U/SU-ORFS3/8U 90° 0071767
1 1/2”
Size No.
R1 1/2U/SU-ORFS1 1/4 90° 0072272
R1 1/2U/SU-ORFS1 1/2 90° 0072365
t-fIttIngs
Size No.
ORFS1/4U-ORFS1/4U-ORFS1/4U 0061944
ORFS3/8U-ORFS3/8U-ORFS3/8U 0071632
ORFS3/8U-ORFS3/8S-ORFS3/8U 0071633
ORFS1/2U-ORFS1/2U-ORFS1/2U 0072711
ORFS1/2U-ORFS1/2S-ORFS1/2U 0072761
ORFS9/16U-ORFS11/16U-3/8U BSPP 0070580
128 129
Hydraulics accessories
90°
Size No.
M6X1.00 0045110
M8X1.25 0026625
KR1/8 0026617
adjustMent nIppLe M6-M12
Size No.
Adjustment nipple M6-M12 P8301
feMaLe pLug
Size No.
R1/2 0036715
R1/4 0038780
R3/8 0038790
R1 0044550
R3/4 0044780
ORFS 3/4» (12FNMLS) 0064028
45°
Size No.
M6X1.00 0036145
M8X1.00 0061078
M8X1.25 0026626
KR1/8 0026618
straIgHt
Size No.
M6X1.00 0045120
M8X1.00 0067023
M8X1.25 0026633
KR1/8 0026641
UNF 1/4 0057147
Measuring fittings
MeasurIng fIttIng
Size No.
R1/8 0006807
R1/4 0006808
t-turnIng L-fIttIngs
Size No.
R1/4U/SU-ORFS1/4U-ORFS1/4U 0061960
R3/8U/SU-ORFS3/8U-ORFS3/8U 0063433
R1/2U/SU-ORFS1/2U-ORFS1/2U 0061920
R3/4U/SU-ORFS3/4U-ORFS3/4U 0071698
R1U/SU-ORFS1U-ORFS1U 0061927
130 131
MaLe pLug
Size No.
R1/2 ALLEN 0021972
R1/8 ALLEN 0021996
R3/8 ALLEN 0021998
R1/4 ALLEN 0022004
R3/4 ALLEN 0022475
R1 ALLEN 0022476
R3/4 HEX 0047793
R11/2 ALLEN 0055265
Muff
Size No.
R1/4 0040975
R3/8 0040977
R1/2 0040980
R3/4 37 MM 0040982
R1/2 AISI316 0063186
R3/4 AISI316 0063187
R1 AISI316 0064830
QuICk ConneCtor
Size No.
1/4 FEMALE 0064205
3/8 FEMALE 0063161
1/2 FEMALE 0022699
3/4 FEMALE 0022682
1/4 MALE 0064206
3/8 MALE 0063162
1/2 MALE 0022681
3/4 MALE 0022683
grease nIppLes
Size No.
M6*1,00 straight 0045120
M6*1,00 45 0036145
M6*1,00 90 0045110
M8X1.25 straight 0026633
M8X1.25 45 0026626
M8X1.25 90 0026625
130 131
Hydraulics accessories
usIt seaL rIng
Size No.
1/8 0024745
1/4 0017301
3/8 0017319
1/2 0017327
3/4 0017335
1 0017343
1 1/4 0017350
1 1/2 0017352
2 0060549
usIt seaL rIng set (25 pCs)
Size No.
1/4 x 25 001730125
3/8 x 25 001731925
1/2 x 25 001732725
3/4 x 25 001733525
1 x 25 001734325
Hose sHIeLd
Description ∅ mm Length
m Colour No.
Hose shield 12/15 50 black 0013429
Hose shield 15/18 50 black 0013430
Hose shield 50 1 yellow 0021225
Hose shield 25 6 black 0021226
Hose shield 32 6 black 0021227
Hose shield 110 1 yellow 0021231
Hose shield 12 10 black 0058387
Hose shield 75 1 black 0061218
Hose shield 140 1 black 0061219
Hose shield 110 2,2 yellow 0061855
Hose shield 110 2,2 black 0065491
Hose shield 110 1 black 0065522
Hose shield 50 1 black 0065524
Hose shield 50 6 black 0065740
Hose shield 75 6 black 0065741
Hose shield 110 6 black 0065742
Hose shield 25 6 black 0065743
Hose shield 20 6 black 0065744
Hose shield 75 2 black 0067320
Size No.
1/8” straight 0026641
1/8” 45 0026618
1/8” 90 0026617
Grease nipple assortment 0070032
133132
Manual lubrication .........................................................133Centralised lubrication ....................................................133Pipe ends; spindles and sleeves .................................. 133For textile reinforced hose (1/8) .....................................133For thermoplastic hose (8/4) ..........................................133For steel reinforced hose (1/4) .......................................133Male connectors, male elbows ................................... 134Adjustable male elbow ....................................................135T-unions, ......................................................................135LE-unions ......................................................................135Union connectors ..........................................................136Quick coupling body ........................................................136Ferrules .......................................................................136Bulkhead unions ............................................................136Connector nuts .............................................................136Lengthening piece ..........................................................137Elbow nipple ..................................................................137Male connector smg ......................................................137Double nipple ................................................................137
Central lubrication system parts
133132
Central lubriCation system parts
For textile reinForced hose (1/8)
Size No.
4 mm (1/8” hose)) spindle SM11650320
4 mm (1/8” hose) pressable sleeve SM11651050
For thermoplastic hose (8/4)
Size No.
4 mm (8/4 hose) spindle SM11650320
6 mm (8/4 hose) spindle 0058866
4-8 mm (8/4 hose) pressable sleeve SM11651070
For steel reinForced hose (1/4)
Size No.
8 mm(1/4” hose) spindle SM11650400
8mm (1/4” hose) spindle 90° SM11650450
8mm (1/4” hose) threaded sleeve SM12651340
For thermoplastic hose (8/4)
Size No.
6 mm (8/4 hose) threaded spindle SM11650326
6 mm (8/4 hose) threaded sleeve SM11651080
pipe ends; spindles and sleeves
centralised lubrication
Description No.
Filling device, SAFEMATIC 0035460
Filling device, SAFEMATIC NLGI2 0060656
Nipple set + Crimping tool SM11800064
Vaseline EP 00, 18 kg 0033804
Vaseline EP 1, 18 kg 0061307
Vaseline EP 2, 18 kg, Operating temperature -30...+110°C. 005678420
manual lubrication
Description No.
Grease gun, LINCOLN 0028555
Grease gun hose 0029017
Grease gun head, LINCOLN 0029025
Grease gun, SKF Battery operated 0070585
135134
a
d
b c
male connectors, male elbows
male connectors
Product name No. a width across flats b diameter c tube size d width
across flats e thread
PEL 4 LL R 1/8” SM11643280 11 9,75 4 10 R 1/8”
PEL 4 LL UNF 1/4” SM11643290 11 6,2 4 10 UNF 1/4”
PEL 4 LL M 6 SM11643250 10 6 4 10 M 6
PEL 4 LL M 8x1,25 SM11643275 10 8 4 10 M 8x1,25
PEL 6 LL R 1/8” 0058871 11 9,75 6 12 R 1/8”
PEL 6 LL M 6x1 0059165 11 6 6 12 M 6x1
PEL 6 LL M 8x1 SM11643295 11 8 6 12 M 8x1
PEL 8 LL R 1/8” 0060084 12 9,75 8 14 R 1/8”
PEL 8 L R 1/4” SM11643330 19 12,95 8 17 R 1/4”
male elboWs
Product name No. a diameter b tube size c width across flats d thread
KKL 4 LL R 1/8” SM11643070 9,75 4 10 R 1/8”
KKL 4 LL M 6 SM11643050 6 4 10 M 6
KKL 4 LL M 8x1,25 SM11643065 8 4 10 M 8x1,25
KKL 6 LL R 1/8” 0058862 9,75 6 12 R 1/8”
KKL 6 LL M 6x1 0059167 6 6 12 M 6x1
KKL 8 LL R 1/8” 0062370 9,75 8 14 R 1/8”
KKL 8 L R 1/4” SM11643120 13,2 8 17 R 1/4”
KKL 4 LLR/nipple M 6 SM11643500 9,75 4 10 R 1/8”
KKL 6 LL M8X1.25 0058863 8 6 12 M 8x1,25
XKKL 6 LL R 1/8” ZN SM12643610 6 12 R 1/8”
135134
Central lubriCation system parts
t-unions,
Product name No. a width across flats b tube size c thread
TEL 8 L SM11643430 17 8
le-unions
Product name No. a width across flats b tube size c thread
LE 8 LR 1/4” SM11643170 17 8 1/4”
LE 8 L adjustable SM11643437 17 8 M 14x1,5
adjustable male elboW
Size width across flats thread No.
for 8 mm pipe 17 M14x1,5 SM11643125
136 137
a bc
union connectors
Product name No. a tube size b width across
flats
JAL 6 LL 0058864 6 12
bulkhead unions
Product name No. a tube size b width across
flats
LÄL 4 LL SM11643140 4 10
LÄL 6 L 0060134 6 12
LÄL 8 L SM11643150 8 17
Quick coupling body
Product name No. a thread b width across flats c diameter
Quick coupling body r 1/4” zn SM11650650 1/4” 21 25
Ferrules
Product name No. a tube size b diameter
LER 4 LL SM11643180 4 5,5
LER 6 L 0058859 6 10
LER 6 LL SM12643010 6 8
LER 8 L SM11643200 8 12
connector nuts
Product name No. a tube size b diameter
Nut M 4 LL SM11643210 4 10
Nut M6 L 0058867 6 14
Nut M 6 LL SM12643170 6 12
Nut M 8 L SM11643230 8 17
Nut M 8 LL 0022493 8 14
136 137
a
a
b
b
Central lubriCation system parts
male connector smg
Product name No.a width across
flats nutb width across
flats body c tube size d thread
Male connector SMG SM11770420 12 14 6 M12x1
lengthening piece
Product name No. a raising
JAN R 1/8” L=13 mm 0058861 13
elboW nipple
Product name No.a width across flats
b thread
KUN R 1/8”-90AST ZN SM11643615 12 1/8”
elboW nipple
Product name No. a width across flats
b thread
KUN R 1/8” 45 ast. 0061805
double nipple
Product name No. a width across flats
b male thread
Kar. Double nipple R1/4 ZN SM11643600 14 1/4”
139138
Harting connectors 1-10 pins ........................................... 139Harting connectors 1-16 pins ........................................... 139Harting connectors 1-24 pins ........................................... 140Harting connectors 1-32 pins ........................................... 140Control unit connectors ................................................... 141Ips ............................................................................... 141Knutsson ....................................................................... 141Susmic 51 ..................................................................... 141Optinet .......................................................................... 142Opticontrol ..................................................................... 142MB-Engine ..................................................................... 142MB-Engine .................................................................... 143Amp-Connectors ............................................................. 144Deutsch-Connectors ........................................................ 145
Electrical connectors
139138
0056216
00557920055790
0056005
0056022
0056017 0017324 0017326
0043158 0056206
ElEctrical connEctors
We have compiled the connectors used in PONSSE forest machines under a single title. Using high-quality connector bodies and conductor contacts, you can prevent the connections from coming loose and the contact surfaces from oxidising, which could result in operational failures that are difficult to identify. The correct contacts in the correct connector body guarantee resistance-free connectors for years ahead. Special pliers will be required for connecting conductor contacts to the conductor, depending on the connector type. Ponsse offers special low-cost pliers for making high-quality connections, also in field conditions.
Electrical connectors
Harting connectors 1-10 pins
Harting connectors 1-16 pins
0061429 female
0061430 male
141140
0017213 0017314 0044315
0056020 0017311 0017312
0044321 0017318
0017323
0056008
0017325, 17-320017324, 1-16
0017326, 1-16 0017329, 17-32
Harting connectors 1-24 pins
Harting connectors 1-32 pins
Harting crimping tool ST0312
Dismounting tool ST031201
Spare socket for the dismounting tool ST031202
141140
0057922
0056779
0057872 0055949
0057912
0056780
0058032
0057911
0057530
0057529
0057532
0057285
ElEctrical connEctors
Control unit connectors
0056158 - Green
0055837 - White
1.0 - 3.0 mm2
0.5 - 1.0 mm2
0.35 - 1.0 mm2
1.5 - 2.5 mm2
0.3 - 0.85 mm2
1.5 - 2.5 mm2
0.5 - 1.5 mm2
SuSmiC 51
KnutSSon
ipS
143142
0057998
0056177 0058153 0057602
0060018 00609240060014
0060015 00609240060014
0056176
MB - ADM2 - 12
MB - ADM2 - 15
0057996
MB-EnginE
0.5 - 2.0 mm2
0.5 - 1.0 mm2
0.5 - 1.0 mm2
2.4 - 4.0 mm2
2.5 - 4.0 mm2
OptinEt
OpticOntrOl
143142
0060019 0060022 0060021
MINIDIAG
MB-PlD
0060566 0060568
MB - ADM2 - FlAME - CAN - 18
MB - ADM2 - 21
0060016 00609240060014
0060017 00609240060014
ElEctrical connEctors
mB-EngInE
0060730 00607310.5 - 1.0 mm2 1.0 - 2.0 mm2
0.5 - 1.0 mm2
0.5 - 1.0 mm2
0.75 - 1.5 mm2
2.5 - 4.0 mm2
2.5 - 4.0 mm2
145144
0025826 0025824
0025822 0025821
0025816 0025815
0025820 0025819
Amp-connEctors
0025828 - male0056724 - male
0055943 - female 0025827- female 0056723 - female
3.0 - 6.0 mm2
0.5 - 2.1 mm2
0.5 - 2.0 mm2
0.5 - 2.0 mm2 3.0 - 6.0 mm2
145144
0064584 0064585 0064582 0064583
0064713 0064714 0064711 0064712
0064589 0064590 0064587 0064588
0064593 0064594 0064591 0064592
0064791 0064792 0064737 0064738
ElEctrical connEctors
DEutscH-connEctors
0064940 / 0.5 - 1.0 mm2 golden, male0064724 / 0.75 - 1.5 mm2 male0064722 / 1.5 - 2.5 mm2 male
0067510 / 0,5 mm2, golden, male
0064941 / 0.5 - 1.0 mm2 golden, female0064723 / 0.75 - 1.5 mm2 female0064721 / 1.5 - 2.5 mm2 female
0067511/0,5 mm2, golden, female
Crimp crimping tool, production model ST0303
Crimp crimping tool, service model ST0302
147146
Switches ................................................................. 147Helicopter switch ..................................................... 148Circuit boards ......................................................... 148Push-buttons ........................................................... 148Others .................................................................... 149PONSSE Comfort user interface ............................... 152Ball handles, harvester ..................................................152Mini handles, harvester .................................................152Mini handles, forwarder .................................................152
Electric switches
147146
ElEctric switchEs
Switches
SWITCH 0062104
Description
3 POS ROCKER SWITCH, ON-OFF-ON
SWITCH 0056092
Description
2 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON
SWITCH 0025897
Description
3 POS RETURN ROCKER SWITCH, <ON>-OFF-<ON>
SWITCH 0025992
Description
3 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON-ON
SWITCH 0060030
Description
3 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON-ON
SWITCH 0060031
Description
3 POS ROCKER SWITCH, ON-OFF-ON
SWITCH 0056209
Description
2 POS RETURN ROCKER SWITCH, OFF-<ON>
SWITCH 0025991
Description
3 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON-ON
SWITCH 0025894
Description
2 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON
SWITCH 0062984
Description
3 POS RETURN ROCKER SWITCH, <ON>-OFF-<ON>
149148
SWITCH 161645
Description
4 POS SWITCH, RIGHT
SWITCH 161646
Description
4 POS SWITCH, LEFT
Helicopter switch
CIRCUIT BOARD, 2000 1631430
Description
KEYPAD 4
CIRCUIT BOARD, 2000 1631652
Description
7+1 KEYBOARD WITH A MULTI-SELECTION SWITCH
CIRCUIT BOARD, 2000 1631655
Description
KEYPAD 8
Circuit boards
SWITCH 0057807
Description
PUSH-BUTTON, CLOSING
SWITCH 0057808
Description
PUSH-BUTTON, OPENING
SWITCH 0061965
Description
PUSH-BUTTON, CLOSING
Push-buttons
FOR CAlIPeR+ 0062642
Description
Also for EME handles
149148
ElEctric switchEs
SWITCH 0066818
Description
FNR DRIVING DIRECTION SELECTOR, ON-OFF-ON
SWITCH 0066217
Description
ROCKER SWITCH, ON-OFF-ON
SWITCH 0061966
Description
PUSH-BUTTON, OPENING
SWITCH 0055321
Description
3 POS ROCKER SWITCH, ON-OFF-ON
Others
SWITCH 0055224
Description
ROCKER SWITCH, OFF-ON
SWITCH 0058161
Description
CONSTANT RPM SWITCH, RETURN, OFF-<ON>
SWITCH 0057363
Description
RETURN PUSH-SWITCH
MAIN SWITCH
Description
TP2000 0061983
MACHINES BEFORE MB-ENGINES BOS0341002003
Main current switch wrench BOS1342026002
151150
SWITCH 0055322
Description
ROCKER SWITCH, OFF-ON
SWITCH 0057689
Description
RETURN
SWITCH 0069162
Description
ROCKER SWITCH, INDICATOR LIGHT, OFF-ON
SWITCH 0060577
Description
2 POS ROCKER SWITCH, OFF-ON
SWITCH 0066106
Description
EME SWITCH
SWITCH 0056228
Description
3 POS ROCKER SWITCH, RETURN <ON>-OFF-<ON>
SWITCH 0061932
Description
LOCKED ROCKER SWITCH, OFF-ON
SWITCH 0065665
Description
EME SWITCH, RETURN, OFF-<ON>
151150
ElEctric switchEs
SWITCH 0060172
Description
FNR DRIVING DIRECTION SELECTOR, ON-OFF-ON
SWITCH 0065547
Description
2 POS SELECTOR SWITCH, ON-ON
SWITCH 0060173
Description
WINDSCREEN WIPER/WASHER, RETURN <ON>-OFF-<ON>
SWITCH 0065548
Description
3 POS SELECTOR SWITCH, ON-OFF-ON
ROCKeR ARM 0060174
Description
FOR SWITCHES 0060172 & 0060173
PUSH-BUTTON 0044130
SWITCH 0065549
Description
3 POS RETURN ROCKER SWITCH, <ON>-OFF-<ON>
SWITCH 0056149
Description
MICRO SWITCH
152
PONSSe Comfort user interface
BAll HANDleS, HARveSTeR
Kuvaus nro
Joystick, steering lever, 2 pcs 0071483
Keyboard, left, 1 pc 0070051
Keyboard, right, 1 pc 0070052
Thumb switches, left, 1 pc 0070053
Thumb switches, right, 1 pc 0070054
Thumbwheels, 2 pcs PS0718
Windscreen wiper selector, 4 pcs PS0748
Off-road steering, rocker switch 0070748
Windscreen wiper, 1 pc <ON>OFF<ON> 0066217
Differential gear lock, Drive mode, 2 pcs ON/OFF/ON 0069070
Frame lock, Speed range gear, Rear drive, 3 pcs ON-OFF 0069075
Constant rpm, 1 pc (ON)-OFF-(ON) 0069076
Driver switch, 1 pc (ON)-OFF 0069077
Driving direction, 1 pc ON-OFF-ON 0069079
Potentiometer windscreen wiper, interval P20458
Potentiometer, mini steering wheel 1631740
Knob, low 0070115
Knob, high 0070135
Knob, low with nodules 0070136
MINI HANDleS, HARveSTeR
Kuvaus nro
Joystick, steering lever, 2 pcs 0065543
Keyboard, left, 1 pc 0070743
Keyboard, right, 1 pc 0070742
Thumb switches, left, 1 pc 0070745
MINI HANDleS, FORWARDeR
Kuvaus nro
Joystick, steering lever, 2 pcs 0065543
Windscreen wiper selector, 4 pcs PS0748
Off-road steering, joystick PS0754
Off-road steering, rocker switch 0070748
Windscreen wiper, 1 pc <ON>OFF<ON> 0066217
Differential gear lock, Drive mode, 2 pcs ON/OFF/ON 0069070
Frame lock, Speed range gear, Rear drive, 3 pcs ON-OFF 0069075
Constant rpm, 1 pc (ON)-OFF-(ON) 0069076
Driver switch, 1 pc (ON)-OFF 0069077
Driving direction, 1 pc ON-OFF-ON 0069079
Potentiometer windscreen wiper, interval P20458
Potentiometer, mini steering wheel 1631740
Kuvaus nro
Thumb switches, right, 1 pc 0070744
Windscreen wiper selector, 4 pcs PS0748
Off-road steering, joystick PS0754
Off-road steering, rocker switch 0070748
Windscreen wiper, 1 pc <ON>OFF<ON> 0066217
Differential gear lock, Drive mode, 2 pcs ON/OFF/ON 0069070
Frame lock, Speed range gear, Rear drive, 3 pcs ON-OFF 0069075
Constant rpm, 1 pc (ON)-OFF-(ON) 0069076
Driver switch, 1 pc (ON)-OFF 0069077
Driving direction, 1 pc ON-OFF-ON 0069079
Potentiometer windscreen wiper, interval P20458
Potentiometer, mini steering wheel 1631740
Knob, low 0070115
Knob, high 0070135
Knob with nodules 0070136 FORESTRY EQUIPMENT
QUALITY ACCESSORIES
PONSSE PARTS ACCESSORIES comprises quality products
designed specifically for the purposes of forestry professionals.
Ponsse branded accessories and assortments are carefully
selected by Ponsse for the needs of forest machine
entrepreneurs. They meet all the Ponsse quality requirements.
The selection includes tools, assortments, saw bars and
chains.
PONSSE PARTS ACCESSORIES
A Logger´s best friendwww.ponsse.com
152
FORESTRY EQUIPMENT
QUALITY ACCESSORIES
PONSSE PARTS ACCESSORIES comprises quality products
designed specifically for the purposes of forestry professionals.
Ponsse branded accessories and assortments are carefully
selected by Ponsse for the needs of forest machine
entrepreneurs. They meet all the Ponsse quality requirements.
The selection includes tools, assortments, saw bars and
chains.
PONSSE PARTS ACCESSORIES
A Logger´s best friendwww.ponsse.com
155154
AccessoriesMiscellaneous ........................................................... 155Sets ............................................................................155Welding accessories ......................................................155Miscellaneous ........................................................... 156First aid kit ...................................................................156Storage case for manuals ...............................................156Powder fire extinguisher and accessories ..........................156Logger’s tape measure ...................................................156Plastic container ............................................................156Main current switch wrench ............................................156Tyre inflator ..................................................................157Compressed air hose for ponsse forest machines...............157Tool box ........................................................................157Equipment box ...............................................................157Hinges .........................................................................157Fuel filling pumps ...........................................................158Hydraulic oil filling pumps ................................................158Filling hoses ..................................................................158Tank caps .....................................................................158Oil absorbent paper ........................................................158Sight glasses ................................................................158Manual lubrication .........................................................159Centralised lubrication ....................................................159Spare belts ...................................................................159Pressure gauges ...........................................................159Pressure gauge hoses ....................................................159PONSSE special tools ............................................... 160Special tools .................................................................160Engine service tools .......................................................161Wire connection tools ....................................................161Torque wrenches ...........................................................162Spanner wrenches .........................................................162Extractors ....................................................................162Hydraulic cylinder wrenches ............................................163T-wrenches ...................................................................163Electric hand tools .........................................................163Pneumatic hand tools .....................................................163Hydraulic tools ..............................................................164Welding equipment ........................................................164Battery maintenance ......................................................164Repair shop machinery and equipment ..............................164Lifting equipment ...........................................................164General hand tools .........................................................165Chain and track tensioners ..............................................165Bars and installation rods ...............................................165Dual, grapple changing tool .............................................165Ladders, working platforms .............................................166Trestles ........................................................................166Tool sets ......................................................................166
155154
Accessories
Miscellaneous
SeTS
Description No.
Grease nipple assortment 0070032
O-ring kit 0070070
Electric connector kit 0070091
Seal ring assortment 0070597
Lock washer assortment 0070885
Fuse assortment 0071054
Deutsch connector kit 0071145
SeTS
Description No.
For customer vehicle 0071186
End sleeve kit 0071230
Bulb assortment 0071279
Cu-ring assortment narrow 0071607
Cu-ring assortment wide 0071608
O-ring kit, orfs 0071613
O-ring kit, bsp 0071808
NEW: PONSSE collections
We have supplied forest machine accessories to our customers for more than 20 years. As a new feature, our service business now offers PONSSE sets that are based on the daily service needs of forest machine entrepreneurs and meet Ponsse’s quality requirements. The sets include a wide selection of high-quality accessories that answer to the present-day needs. The sets are assembled in a durable, high-quality set case that is well-suited for the use of a ma-chine entrepreneur. • fuses• USIT seals• copper packing kits
• O-ring kits• electric connector kits• a safety washer kit
• a central lubrication connector kit
• a grease nipple kit• a bulb set
WelDING ACCeSSORIeS
Description No.
Welding wire, OK ARISTOROD 12.50 1.0MM 18Kg 0071450
Welding electrode, OK48.00 2,5MM / 1,7Kg 0073580
Welding electrode, OK68.82 2,5MM / 0,6 Kg 0073581
156 157
lOGGeR’S TAPe MeASURe
Description No.
Measuring reel, Caliper/+ 0062659
Tape measure Caliper3 0072666
Tape measure, Caliper3 with fastener 0072668
Tape measure fastener, tilting 0074749
FIRST AID KIT
No,
0035540
STORAGe CASe FOR MANUAlS
No,
P34499
POWDeR FIRe exTINGUISHeR AND ACCeSSORIeS
Description No.
Powder fire extinguisher 0061814
Fire extinguisher bracket 0058112
Fire extinguisher fluid 0062268
MAIN CURReNT SWITCH WReNCH
Description No.
Main current switch wrench BOS1342026002
Main current switch wrench, TP2000 0062772
PlASTIC CONTAINeR
Description No.
1 L 0021719
10 L 0021718
Miscellaneous
156 157
Accessories
COMPReSSeD AIR HOSe FOR PONSSe FOReST MACHINeSDescription No.
Compressed air hose 0061685
TOOl BOx
Description No.
430x205x200 0035544
TP2015 0072569
HINGeS
Description No.
Weld-on hinge, small 0026576
Weld-on hinge, large 0026579
Screw-on hinge, small (60X30) 0026559
Screw-on hinge, medium (60X40) 0026574
Screw-on hinge, large (60X80) 0026575
eqUIPMeNT BOx
Description No.
Equipment box Beaver P40354
Gas Spring for Equipment box 0055191
TyRe INFlATOR
Description No.
Tyre inflator 0030957
158 159
FUel FIllING PUMPS
Description No.
JABSCO 0048337
HYDAC 0058492
TANK CAPS
Description No.
W/O lock 0068166
Whit lock 0055101
Seal 00551011
Spare key 00551012
SIGHT GlASSeS
Description No.
Long, M12 0042100
Short, M12 0042101
Short, MB-models 0060132
FIllING HOSeS
Description No.
For hydraulic oil AM00069
For fuel AM00070
HyDRAUlIC OIl FIllING PUMPS
Description No.
FLUTEC 0058493
OIl ABSORBeNT PAPeR
Description No.
Oil absorbent paper 0058668
Oil absorbent paper TECTMAT 8279 0068072
158 159
Accessories
CeNTRAlISeD lUBRICATION
Description No.
Filling device, SAFEMATIC 0035460
Filling device, SAFEMATIC NLGI2 0060656
Nipple set + Crimping tool SM11800064
Vaseline EP 00, 18 kg 0033804
Vaseline EP 1, 18 kg 0061307
Vaseline EP 2, 18 kg, Operating temperature -30...+110°C. 005678420
PReSSURe GAUGeS
Description No.
0-6 BAR ST010901
0-60 BAR ST010902
0-250 BAR ST010903
0-400 BAR ST010904
0-600 BAR ST010905
Rubber protective cover 0035501
SPARe BelTS
Description No.
0.3 m 0028887
0.5 m 0028888
0.8 m 0028889
PReSSURe GAUGe HOSeS
Description No.
Pressure gauge hose, 60cm ST010906
Pressure gauge hose, 120cm ST010907
MANUAl lUBRICATION
Description No.
Grease gun, LINCOLN 0028555
Grease gun hose 0029017
Grease gun head, LINCOLN 0029025
Grease gun, SKF Battery operated 0070585
161160
SPeCIAl TOOlS
BEA
R
ER
GO
BEAVER
HS16
HS15
CO
BR
A
HS10
ELEPH
AN
T
BU
FFA
LO
WIS
EN
T
BIS
ON
ELK
GA
ZELLE
CA
RIB
OU
S15
S10
MB
K75
HN
125
HN
200
C55
H53
H60
H73
Description No.
Middle pivot bearing fastening bolt key wrench ST0077 X X X X X
Middle pivot bearing fastening bolt key wrench ST0078 X X X X X
Middle pivot chucking key ST0286 X X X X
Middle pivot vertical pin key ST0192 X X X X
Middle pivot horizontal nut tool ST0062 X X X
Middle pivot tightening tool ST0004 X X X X X X X
Middle pivot tightening tool arm ST00401 X X X X X X X
Middle pivot ring nut tightener P16552
Cabin tilting key ST0287 X X X X X X X X X X X X X X X X
Cabin locking key ST0300 X X X X X X X X
Cabin tilting key S10 ST0346 X
Cabin pin removal tool P24559
Installation tool for the hydraulic oil tank’s suction hose connector, key size 102 mm ST0067 X X X X X X X X X X X X X X
Installation tool for the hydraulic oil tank’s suction hose connector, 120 mm
ST0297 X X
Installation tool for the hydraulic oil tank’s suction hose connector, 71 mm
ST0298 X X X X X X X X X X X X X X
Large pump bolt key wrench (30 mm ring) ST0050 X X X
Saw motor dismounting key ST0040 X X X
Lower pin key ST0039A X X
Upper pin key A ST0198A X X
Engine turning tool ST0028 X
PONSSe special tools
161160
Accessories
eNGINe SeRvICe TOOlS
Description No.
Piston ring expander 80–120 mm ST0010
Valve spring lifter ST0013
Piston ring compressor 57–125 mm ST0015
Stud extractor 6–12 mm ST0033
Optical antifreeze agent/battery acid meter ST0025
Oil filter key ST0105
Alternator belt pulley key ST0045
SPeCIAl TOOlS
Description No.
For disconnecting the colour marking valve block’s check valve ST0022
Crimping tool for HARTING connectors ST0312
Disconnection tool for HARTING connection contacts ST031201
Replacement bit for the disconnection tool for HARTING connectors ST031202
Adjustable Deutsch crimping tool for Solid connectors: 0064721, 0064722, 0064723 0064724, 0064940, 0064941
ST0303
Deutsch crimping tool (not adjustable) for Solid connectors:0064721, 0064722, 0064723 0064724, 0064940, 0064941
ST0302
Pin extractor ST0006
WIRe CONNeCTION TOOlS
Description No.
Soldering iron 24V/50W ST0284
Soldering iron 230V/40W ST0285
Crimping tool 0.5–2.5 mm2 ST0112
Cable shoe crimping tool 0.5–4.0 mm2 ST0111
Peeling tool 0.02–10 mm2 ST0110
Connection pliers for insulated connectors 1.5–6 mm2 ST0113
Connection pliers for uninsulated connectors 1.5–6 mm2 ST0114
Connection pliers for uninsulated connectors 0.5–1.5 mm2 ST0115
Connection tool for round connectors 1.2 mm ST011602
Connection tool for round connectors 1.6 mm ST011601
Connection tool for round connectors 2.5 mm ST011605
Connection tool for round connectors 3.5 mm ST011604
Connection tool for round connectors 4.0 mm ST011603
Connection tool for flat connectors 0558-99984 WURTH ST011701
Connection tool for flat connectors 0558-99985 WURTH ST011702
Connection tool for flat connectors 0558-99986 WURTH ST011703
Connection tool for Micro Timer II and III connectors 1.6 mm ST011801
Description No.
XZN key M10 L-MODEL ST004501
Graduated plate ST0281
Bearing and seal installation wrench set ST0234
162 163
TORqUe WReNCHeS
Description No.
Torque wrench 20–100 Nm with interchangeable heads ST001901
Torque wrench 25–130 Nm with interchangeable heads ST001902
Torque wrench 40–200 Nm with interchangeable heads ST001903
Torque wrench 80–400 Nm with interchangeable heads ST001904
Torque wrench 160–800 Nm with a 3/4” driver ST0280
Ratchet insert tool 1/2 9x12 ST001905
Ratchet insert tool 1/2 14x18 ST001906
Ratchet insert tool 3/4 14x18 ST001907
Torque converter key wrench (“multiplier”) with a 3/4” driver ST0020
exTRACTORS
Description No.
Extractor 1 25–80 mm, bipod ST001401
Extractor 2 25–130 mm, bipod ST001402
Extractor 3 50–160 mm, bipod ST001403
Extractor 4 60–200 mm, bipod ST001404
Extractor 5 80–250 mm, bipod ST001405
Extractor 6 80–350 mm, bipod ST001406
Internal bearing extractor set 12–46 mm ST0250
SPANNeR WReNCHeS
Description No.
Spanner wrench KM 5, socket 1/2” ST0126
Spanner wrench KM 6, socket 1/2” ST0127
Spanner wrench KM 7, socket 1/2” ST0128
Spanner wrench KM 8, socket 1/2” ST0129
Spanner wrench KM 9, socket 3/4” ST0130
Description No.
Spanner wrench KM 10, socket 3/4” ST0134
Spanner wrench KM 11, socket 3/4” ST0135
Spanner wrench KM 13, socket 3/4” ST0231
Spanner wrench KM 14, socket 1” ST0325
Spanner wrench KM 15, socket 1” ST0232
Spanner wrench KM 16, socket 1” ST0324
Spanner wrench KM 17, socket 1” ST0299
Spanner wrench KM 19, socket 1” ST0323
Spanner wrench KM 21 for upper pin, socket 1” ST0198B
Spanner wrench KM 23 ST0039B
Spanner wrench GU 11 long ST0132
Spanner wrench GU 13 ST0133
Spanner wrench GU 15 ST0236
Spanner wrench KM15 ST0332
Turn exchanger socket ST0349
GU 11 short ST0131
162 163
Accessories
HyDRAUlIC CylINDeR WReNCHeS
Description No.
Hydraulic cylinder wrench 220 mm ST0344
Hydraulic cylinder wrench 450 mm ST0271
Hydraulic cylinder wrench 500 mm ST0012
Hydraulic cylinder wrench 500 mm ST0329A
Hydraulic cylinder wrench 800 mm ST0329B
Hydraulic cylinder wrench 1,000 mm ST0329C
Pin set 6/8 550 mm ST032901
Pin set 10/L 550 mm ST032902
Pin set 12/14 800 and 1,000 mm ST032903
Pin set 16 800 and 1,000 mm ST032904
T-WReNCHeS
Description No.
T-wrench ST0288
T-wrench, long ST028801
eleCTRIC HAND TOOlS
Description No.
Battery-operated percussion nut driver M 18 Li-Ion ST0162
Hot air blower ST0270
Cordless drill 14.4 V ST0273
Drill with a shovel handle ST0275
Percussion drill ST0274
Gas soldering iron ST0283
Work lamp 230V / 11W / 5 m, tubular ST0243
Work light 2x18W/5 m, rectangular ST0254
Battery tester 6/12 V ST0172
PNeUMATIC HAND TOOlS
Description No.
Pneumatic drill ST0276
Pneumatic corner drill ST0277
Needle scaler P2516A ST0327
Pneumatic gun 0038026
Quick connector for, e.g., compressed air gun 0070871
164 165
RePAIR SHOP MACHINeRy AND eqUIPMeNT
Description No.
Compressor 2.2 kW with a 20 l tank ST0175
Hose reel for compressed air, metal 10 mm/10 m ST0176
Transmission oil pump, pneumatic ST0304
Tyre pump with gauge ST0242
Aggregate 6 kW, 230 V ST0156
Manual pump ST0138
Compressed air hydraulic pump ST0140
lIFTING eqUIPMeNT
Description No.
Lifting tackle 0.75 t ST0158
Lifting tackle 1.5 t ST0159
Lifting tackle 3 t ST0160
Lifting tackle 6 t ST0161
Hoist 1.3 t, min. 80 mm, max. 740 mm ST0123
Hoist 2 t, min. 80 mm, max. 795 mm ST0124
Pneumatic hydraulic crane 25/50t, min. 220 mm, max. 445 mm ST0345
Bottle jack 10 t, min. 131 mm, max. 223 mm ST0289
Bottle jack 20 t, min. 234 mm, max. 459 mm ST0290
WelDING eqUIPMeNT
Description No.
Welding inverter Caddy Arc 151 i A31 ST0163
MIG/MAG welding machine Esab 340A 4 wd ST0171
Carbon arc gouging pin OK Carbon ST0328
Combi X 11 security pack, gas welding/cutting equipment ST0157
HyDRAUlIC TOOlS
Description No.
Thrust cylinder CLF220-50 NIKE ST0139
Thrust cylinder CHFA184A NIKE ST0141
BATTeRy MAINTeNANCe
Description No.
Battery charger 220A with a start-up function ST0165
Battery charger 500E with a start-up function ST0166
164 165
Accessories
GeNeRAl HAND TOOlS
Description No.
Multimeter ST0122
Multimeter 0056878
TORX wrench SIZE 40, 1/4” driver ST0235
Bits ratchet set (TORX, hex, 1/4” sockets, ph, pz) ST0279
Long hose connector socket wrench 41 mm, 3/4” driver ST0308
Slide gauge 150 mm ST0251
Micrometer 0–25 mm ST0253
Micrometer 25–50 mm ST0252
Dismounting wrench for greaser pump unit, double-headed socket ST0348
65 mm socket with a 1” driver ST0018
Double suction cup ST0282
Service shop hand tool table with tools and equipment ST0239
Installation worker’s tool cabinet without tools ST0142
Glued plexiglass cutter ST0125
Glued plexiglass extractor blade 85 mm ST012501
Hose clamp pliers 291-0067 ST0347
Opti 5 dismounting wrench ST0333
LED headlamp, special coating ST0153
CHAIN AND TRACK TeNSIONeRS
Description No.
Chain tensioner for Wallingfords chains G202 ST0294
Chain tensioner for Wallingfords chains G200 ST0295
Tyre chain connector dismounting tool ST0330
Track tensioner Eco-Track, Eco-Soft, Eco-Of, Eco-Max, Eco-Baltic, Pro-Track, Combination track
ST0292
BARS AND INSTAllATION RODS
Description No.
Aluminium bar 1.5 m, 2.8 kg ST0337
Aluminium bar 1.5 m, 3.6 kg ST0338
Aluminium installation rod 0.68 m, 0.7 kg ST0339
Aluminium installation rod 0.68 m, 0.7 kg ST0340
Aluminium installation rod 0.48 m, 0.5 kg ST0341
Aluminium installation rod 0.43 m, 0.4 kg ST0342
Aluminium installation rod 0.82 m, 1.7 kg ST0343
DUAl, GRAPPle CHANGING TOOl
Description No.
DUAL, Grapple changing tool P14365
DUAL, Grapple changing tool P16798
166
TReSTleS
Description No.
Axle trestle SFTAE512 ST0313
Axle trestle SFTBE522 ST0314
Axle trestle SFTBE523 ST0315
Trestle 15 t ST0316
Trestle 15 t ST0317
Trestle 20 t ST0318
Trestle 20 t ST0319
TOOl SeTS
Description No.
Basic tool set ST0336
Expanded tool set for forwarders ST0334
Expanded tool set for harvesters ST0335
lADDeRS, WORKING PlATFORMSDescription No.
Stepladder, step width 45 cm, height 0.47 cm ST018201
Stepladder, step width 45 cm, height 0.70 cm ST018202
Stepladder, step width 45 cm, height 0.93 cm ST018203
Stepladder, step width 45 cm, height 1.15 cm ST018204
Stepladder, step width 45 cm, height 1.38 cm ST018205
KTA-300 (Protec) folding installation platform ST0191
One-sided industrial steps, step height 0.78 cm ST030901
One-sided industrial steps, step height 1.01 cm ST030902
One-sided industrial steps, step height 1.30 cm ST030903
One-sided industrial steps, step height 1.56 cm ST030904
One-sided industrial steps, step height 2.08 cm ST030905
One-sided industrial steps, step height 2.59 cm ST030906
Folding work ladder, step height 1.75 cm ST031001
Folding work ladder, step height 1.95 cm ST031002
Folding work ladder, step height 2.40 cm ST031003
Standard folding scaffold, expandable platform 0.75 x 1.8 m ST031101
Standard folding scaffold, expandable platform 1.35 x 1.8 m ST031102
Secure step platform TRT-106 ST018801
Secure step platform TRT-108 ST018802
Secure step platform TRT-109 ST018803
Secure step platform TRT-110 ST018804
Secure step platform TRT-112 ST018805
Secure step platform TRT-115 ST018806
167
ChemiCals
Ponsse paints ........................................................... 169Spray cans ...................................................................1693-Litre containers ..........................................................1691-Litre containers ..........................................................169Paint thinner .................................................................169Oils ......................................................................... 169Engine oil operating temperatures .............................. 169Motor oils .....................................................................170Turbo Super 10W-40 (Mb 228.5) ...................................170Turbo Super 5W-30 (Mb 228.5) .....................................170Turbo Lxe 10W-30 (Mb 228.3) .......................................170Turbo Lxe 10W-40 (Mb 228.3, Mb 229.1) ......................170Turbo Lxe 15W-40 (Mb 228.3, Mb 229.1) ......................170Transmission oil .............................................................170Hypoidi MP 80W/140 GL-5 ...........................................170Hypoidi MP 80W/90 GL-5 .............................................170Hypoidi LS 80W/90 ......................................................170Hypoidi Lf 80W-90 ........................................................171ATf-X ..........................................................................171Viscosity of hydraulic oil ............................................ 171Hydraulic oil ..................................................................171Synhydrauli 15 ..............................................................171Hydrauli 32 Super ..........................................................171Hydrauli 46 Super ..........................................................171biohydrauli Se 46 ..........................................................171biohydrauli Se 68 ..........................................................171Hydrauli 68 Super ..........................................................171Adblue fluid for scr engines .............................................171Radiator fluids .......................................................... 172Neste Zero Hd100 Green ...............................................172Neste Zero Hd100 Red ..................................................172Neste Coolant Long Life M Eu Stage Iv ..............................172Neste 7720 bio ............................................................172Vaseline ................................................................... 173PONSSE Logger’s Grease NLGI 0 .....................................173PONSSE Logger’s Grease NLGI 2 .....................................173PONSSE CENTER GREASE ...............................................173Lubrication cartridges ............................................... 174PONSSE Logger’s Universal Grease NLGI 2 ........................174PONSSE Logger’s Grease NLGI 0 .....................................174PONSSE Logger’s Grease NLGI 2 .....................................174PONSSE Logger’s Pro Grease EP NLGI 2 ...........................174Measuring sensor housing crease ....................................174NLGI grades of greases used in central lubrication systems .175Marking paints ......................................................... 175Ponsse Logger’s Color Red..............................................175Ponsse Logger’s Color blue .............................................175Chain oil................................................................... 176Ponsse logger’s bio chain oil ............................................176SITKO additive ...............................................................176Chemicals .....................................................................176
Chemicals
169168
TÄHÄNPonsse RASVAT ilmo!!!
www.ponsse.com
PONSSE LOGGER’S GREASECalcium thickener and mineral oil based lubrication grease with EP additives for daily use, especially lubrication of pins and slide bearings. Logger’s Grease is also suitable for lubricating saw chains. Note: Not suitable for fast rotating rolling bearings – we recommend Logger’s Pro Grease for them.
• Extremely good water resistance • Excellent corrosion resistance• Excellent against heavy impact loads• Excellent adhesion
PONSSE LOGGER’S PRO GREASEHigh-quality grease for greasing rolling bearings. Typical applications in forest machines include bogie pivot bearings, the cardan line and large roller bearings. Pro Grease keeps your machine components in better condition without the need to reduce the greasing interval. This grease serves the basic needs of each forest machine entrepreneur.
• Good mechanical resistance• Good corrosion resistance• Endless application possibilities
PONSSE LOGGER’S UNIVERSAL GREASEInexpensive lithium-based multi-purpose grease. In forest machines, Universal Grease is suitable for daily greasing points, such as roller bearings and cardan joints. Universal Grease is a reliable multi-purpose grease for operators who maintain their forest machine regularly.
• Good mechanical resistance• Good corrosion resistance• Endless application possibilities
PONSSE LOGGER’S GREASE GUARANTEES PROPER LUBRICATION
PONSSE LOGGER’S GREASE
A logger’s best friend
169168
°F
°C - 30 - 20 0- 10 + 10 + 20 + 30
10W20W - 20
304050
0W - 30, 0W - 405W - 30, 5W - 40
10W - 30, 10W - 40, 10W - 5015W - 30, 15W - 40, 15W - 50
20W - 40, 20W - 50
°C
°F- 22 - 4 + 14 + 32 + 50 + 68 + 86
ChemiCals
Oilsfor all of the oils stated below, the oil change inter-val for PONSSE forest machines equipped with Mer-cedes benz engines is at least 600 hours.
Engine oil operating temperatures
Ponsse paints
3-LITRE CONTAINERS
Description No.
Dark grey RAL7021 0029758
Light grey RAL7005 0029752
Yellow (yellow-green machines) RAL1028 0029761
Yellow (MB engine machines) RAL1003 0064938
SPRAY CANS
Description No.
Dark grey RAL7021 0035832
Light grey RAL7005 0035833
Yellow (MB engine machines) RAL1003 0064178
Silver grey (MB) 0060823
Old grey (aluminium frames) 446C 0035820
Matt black TM121 0029595
Yellow (yellow-green machines) VOV80 0029611
Green TM293 0029603
1-LITRE CONTAINERS
Description No.
Silver grey, MB 0062047
PAINT ThINNER
Description No.
Paint thinner 3 L 0035824
Description No.
Green TM293 0035816
Old grey (aluminium frames) 446C 0035811
Yellow RAL PONSSe 1003 0067143
www.ponsse.com
PONSSE LOGGER’S GREASECalcium thickener and mineral oil based lubrication grease with EP additives for daily use, especially lubrication of pins and slide bearings. Logger’s Grease is also suitable for lubricating saw chains. Note: Not suitable for fast rotating rolling bearings – we recommend Logger’s Pro Grease for them.
• Extremely good water resistance • Excellent corrosion resistance• Excellent against heavy impact loads• Excellent adhesion
PONSSE LOGGER’S PRO GREASEHigh-quality grease for greasing rolling bearings. Typical applications in forest machines include bogie pivot bearings, the cardan line and large roller bearings. Pro Grease keeps your machine components in better condition without the need to reduce the greasing interval. This grease serves the basic needs of each forest machine entrepreneur.
• Good mechanical resistance• Good corrosion resistance• Endless application possibilities
PONSSE LOGGER’S UNIVERSAL GREASEInexpensive lithium-based multi-purpose grease. In forest machines, Universal Grease is suitable for daily greasing points, such as roller bearings and cardan joints. Universal Grease is a reliable multi-purpose grease for operators who maintain their forest machine regularly.
• Good mechanical resistance• Good corrosion resistance• Endless application possibilities
PONSSE LOGGER’S GREASE GUARANTEES PROPER LUBRICATION
PONSSE LOGGER’S GREASE
A logger’s best friend
170 171
MOTOR OILS
The size of the desired vessel is added after the item num-ber.For example, the item number is 0056733 when or-dering Turbo LXe 10W-30 motor oil. By adding the num-ber 20 after the item number (005673320), you will receive a single 20-litre vessel of that particular motor oil.For bulk oil, the item number is left unchanged.
TURBO SUPER 10W-40 (MB 228.5)
No. bulk 200L barrel 20L vessel
0061072 x x x
Neste Turbo Super is a synthetic special oil for high-power diesel engines with extended oil change intervals.
TURBO SUPER 5W-30 (MB 228.5)
No. bulk 200L barrel 20L vessel
0071488 x x x
Neste Turbo Super 5W-30 is a fully synthetic heavy-duty diesel motor oil, which offers a very high performance and saves fuel, designed for new high-power diesel engines with extended oil change intervals.
TURBO LXE 10W-30 (MB 228.3)
No. bulk 200L barrel 20L vessel
0056733 x x x
Semi-synthetic diesel motor oil.
TURBO LXE 10W-40 (MB 228.3, MB 229.1)
No. bulk 200L barrel 20L vessel
0064490 x x x
Synthetic oil.
TURBO LXE 15W-40 (MB 228.3, MB 229.1)
No. bulk 200L barrel 20L vessel
0061074 x x x
Mineral oil. NOT FOR WINTeR TIMe USAGe
TRANSMISSION OIL
The size of the desired vessel is added after the item number.For example, the item number is 0056733 when ordering Turbo LXe 10W-30 motor oil. By adding the number 20 after the item number (005673320), you will receive a single 20-litre vessel of that particular motor oil.For bulk oil, the item number is left unchanged.
hYPOIDI MP 80W/140 GL-5
No. bulk 200L barrel 20L vessel
0055312 x x
Neste Hypoidi MP is a general transmission oil series with extreme pressure additives. It is manufactured from solvent-refined paraffin or naphthenic basic oils. The oils contain efficient antioxidants, antifoaming agents, pressure additives, and additional agents that strengthen the lubrication coating.
hYPOIDI MP 80W/90 GL-5
No. bulk 200L barrel 20L vessel
0033762 x x x
Neste Hypoidi MP is a general transmission oil series with extreme pressure additives. It is manufactured from solvent-refined paraffin or naphthenic basic oils. The oils contain efficient antioxidants, antifoaming agents, pressure additives, and additional agents that strengthen the lubrication coating.
hYPOIDI LS 80W/90
No. bulk 200L barrel 20L vessel
0033713 x x
Neste Hypoidi LS 80W-90 is a multigrade gear oil with extreme pressure additives, containing the additives required for the flexible operation of a limited slip differential. The oil is manufactured from solvent-refined paraffin and contains efficient antioxidants, and additives that prevent foaming, wear and corrosion.
170 171
ChemiCals
hYPOIDI LF 80W-90
No. bulk 200L barrel 20L vessel
0071159 x x x
Neste Hypoidi LF is a general transmission oil series with extreme pressure additives designed for transmissions, gears and hub reductions where the requirement is API GL-5. Modern eHVI (extra High Viscosity Index) basic oil has been used in its manufacture. Neste Hypoidi LF oils contain efficient antioxidants, antifoaming agents, pressure additives and additional agents that strengthen the lubrication coat-ing. Its SAe classification 80W(77W)-90 highlights the su-periority of Neste Hypoidi LF over SAe 80W-90 oils. Neste Hypoidi LF has a first-rate fluidity in temperatures below zero compared with mineral and partially synthetic oils. Its sensitive fluidity guarantees an effortless start-up.
ATF-X
No. bulk 200L barrel 20L vessel
0039250 x
A multipurpose oil for automatic transmissions. In Ponsse forest machines, ATF-X is used in torque converter trans-missions.
ADBLUE FLUID FOR SCR ENGINES
No. Description Volume
007180010 AIR1 ADBLUe 10 L
007180030 AIR1 ADBLUe 30 L
0071800200 AIR1 ADBLUe 200 L
00718001000 AIR1 ADBLUe 1000 L
00718001000P CONTAINeR 1000L
hYDRAULIC OIL
The size of the desired vessel is added after the item num-ber.For example, the item number is 0056733 when or-dering Turbo LXe 10W-30 motor oil. By adding the number 20 after the item number (005673320), you will receive a single 20-litre vessel of that particular motor oil.For bulk oil, the item number is left unchanged.
Viscosity of hydraulic oil
SYNhYDRAULI 15
No. bulk 1000L container
200L barrel
20L vessel
0033746 x
Fully synthetic hydraulic oil. In Ponsse forest tractors, the oil is mainly used in pneumatic brakes.
hYDRAULI 32 SUPER
No. bulk 1000L container
200L barrel
20L vessel
0033837 x x
A Super-class multigrade hydraulic oil for outdoor use.
hYDRAULI 46 SUPER
No. bulk 1000L container
200L barrel
20L vessel
0033829 x x x x
A Super-class multigrade hydraulic oil for outdoor use.
BIOhYDRAULI SE 46
No. bulk 1000L container
200L barrel
20L vessel
0033711 x
A fully synthetic biodegradable hydraulic oil.
BIOhYDRAULI SE 68
No. bulk 1000L container
200L barrel
20L vessel
0067523
hYDRAULI 68 SUPER
No. bulk 1000L container
200L barrel
20L vessel
0033828 x x
A Super-class multigrade hydraulic oil for outdoor use.
172 173
NESTE 7720 BIO
No. bulk
0062050 x
Neste Biojäähdytinneste (propylene glycol) is a radiator fluid that is harmless to the environment. Frost resist-ance 50%, -34°C
Radiator fluids
NESTE ZERO hD100 green
No. bulk 10L vessel
200L vessel
0033720 x
003372010 x
A monoethylene glycol-based radiator fluid. Congealing point -33 °C max. (50% vol.)
NESTE COOLANT LONG LIFE M EU STAGE IVNo. bulk 10L
vessel200L vessel
0072917 x
007291710 x
0072917200 x
NESTE 7735 XLC red
No. bulk 10L vessel
200L vessel
0061358 x
006135810 x
An ethylene glycol-based radiator fluid. Frost resistance 50%, mixture -37 °C Recommended radiator fluid for Ponsse forest machines equipped with Mercedes-Benz engines.
172 173
ChemiCals
PONSSE LOGGER’S GREASE NLGI 0
Volume No.
18 KG 0073810
PONSSe Logger’s Grease NLGI 0 is an anhydrous, calcium thickened lubricating grease based on a mixture of mineral oil and polymer. The grease contains antioxidants, corrosion inhibitors and eP/AW additives. The thickener, together with the special base oil blend, makes the product suitable for the lubrication of heavily loaded bearings and in wet and corrosive environments. The lubricating grease has excellent adhesion and water resistance.
PONSSe Logger’s Grease NLGI 0 is suitable as a universal grease for forestry, agricultural and construction vehicles, where a central lubrication system requires semi-fluid grease.
• Extremely water resistant• Excellent corrosion protection• Endures high shock loads• Excellent adhesion
Vaseline
PONSSE CENTER GREASE
Volume No.
PONSSe Center Grease eP1 LOGGeR’S 18 KG 0074909
PONSSe Center Grease eP0 LOGGeR’S 18 KG 0074910
PONSSE LOGGER’S GREASE NLGI 2
Volume No.
18 KG 0073933
PONSSe Logger’s Grease NLGI 2 is an anhydrous, calci-um thickened lubricating grease based on a mixture of mi-neral oil and polymer. The grease contains antioxidants, corrosion inhibitors and eP/AW additives. The thickener, together with the special base oil blend, makes the pro-duct suitable for the lubrication of heavily loaded bearings and in wet and corrosive environments. The lubricating grease has excellent adhesion and water resistance.
PONSSe Logger’s Grease NLGI 2 has been especially de-veloped as a universal grease for forestry, agricultural and construction vehicles. The product is also suitable in industrial application where water washout and corro-sion are problematic. The grease can be easily pumped in most of the modern centralized lubrication systems des-pite of its high base oil viscosity.
At low temperatures, PONSSe Logger’s Grease NLGI 0 is recommended instead.• Extremely water resistant• Excellent corrosion protection• Endures high shock loads• Excellent adhesion
For more information, contact the spare parts sales.
174 175
Lubrication cartridges
PONSSE Logger’s Universal Grease NLGI 2
Volume No.
12 x 420 ml 0073809
PONSSe Logger’s Universal Grease NLGI 2 is a lithium thickened lubricating grease based on mineral oil. The grease contains antioxidants, corrosion inhibitors and AW additives.
The product is a general multipurpose grease which can be used in various applications within given temperature limits. The lubricating grease offers good mechanical stability and corrosion protection, making it suitable for bearing lubrication even in wet environments.
PONSSe Logger’s Universal Grease NLGI 2 is a high quality multipurpose grease that can be used in both industrial and automotive applications. The grease is suitable for a wide range of plain and rolling bearings.
• Good mechanical stability• Good corrosion protection• Wide range of applications
PONSSE Logger’s Grease NLGI 0
Volume No.
12 x 420 ml 0073807
18 KG 0073810
PONSSe Logger’s Grease NLGI 0 is an anhydrous, calcium thickened lubricating grease based on a mixture of mineral oil and polymer. The grease contains antioxidants, corrosion inhibitors and eP/AW additives. The thickener, together with the special base oil blend, makes the product suitable for the lubrication of heavily loaded bearings and in wet and corrosive environments. The lubricating grease has excellent adhesion and water resistance.
PONSSe Logger’s Grease NLGI 0 is suitable as a universal grease for forestry, agricultural and construction vehicles, where a central lubrication system requires semi-fluid grease.
• Extremely water resistant• Excellent corrosion protection• Endures high shock loads• Excellent adhesion
PONSSE Logger’s Grease NLGI 2
Volume No.
12 x 420 ml 0073806
18 KG 0073933
PONSSe Logger’s Grease NLGI 2 is an anhydrous, calcium thickened lubricating grease based on a mixture of mineral oil and polymer. The grease contains antioxidants, corrosion inhibitors and eP/AW additives. The thickener, together with the special base oil blend, makes the product suitable for the lubrication of heavily loaded bearings and in wet and corrosive environments. The lubricating grease has excellent adhesion and water resistance.
PONSSe Logger’s Grease NLGI 2 has been especially developed as a universal grease for forestry, agricultural and construction vehicles. The product is also suitable in industrial application where water washout and corrosion are problematic. The grease can be easily pumped in most of the modern centralized lubrication systems despite of its high base oil viscosity.
At low temperatures, PONSSe Logger’s Grease NLGI 0 is recommended instead.
• Extremely water resistant• Excellent corrosion protection• Endures high shock loads• Excellent adhesion
PONSSE Logger’s Pro Grease EP NLGI 2
Volume No.
12 x 420ml 0073808
PONSSe Logger’s Pro Grease eP NLGI 2 is a lithium complex thickened lubricating grease based on mineral oil. The grease contains antioxidants, corrosion inhibitors and eP/AW additives.
The lithium complex soap makes the product suitable for applications with a very widetemperature range and especially applications at elevated temperatures. The complex soap structure also gives the product a high degree of mechanical stability. This enhances the performance in vibrating housings and prolongs re-lubrications intervals.
PONSSe Logger’s Pro Grease eP NLGI 2 is a modern high performance product setting a new standard for truly universal grease, suitable for both industrial and automotive Applications. The product’s all-round properties make it the primary choice for various types of bearing applications, including heavy load conditions and temperature peaks of up to 220°C.
• Excellent performance at high temperatures• Very good mechanical stability• High load carrying capacity• Good corrosion protection
174 175
ChemiCals
Marking paints
PONSSE LOGGER’S COLOR RED
Volume No.
10L vessel 0072098
200L 0072098200
1000 L 00720981000
For painting timber in forest work. Red.
PONSSE LOGGER’S COLOR BLUE
Volume No.
10L vessel 0072099
200L 0072099200
1000 L 00720991000
For painting timber in forest work. Blue.
PONSSE forest machines contain an automatic lubrication system which allows the use of stiffer central lubricants.
Greases are divided into NLGI grades from 000 to 6. The higher the number of the grade, the stiffer the lubricant.
The effect of temperature changes in choosing the grease for central lubricationsystems:
In extreme winter conditions, NLGI 00 grease can be used.Inwarmconditions, NLGI 00 grease may cause malfunctions in the system.
NLGI grade (stiffness) of the grease Conditions Temperature
1....2 Warm conditions (summer) Over +0° C (32°f)
0....1 Cold conditions (winter) Under 0° C (32°f)
When changing the grade of the grease: fully use the old grease, fill the container with new grease, bleed the pumping unit and make sure that the new grease comes out through the bleeding screw.
See the pumping unit’s bleeding instructions from the separate manual delivered with the machine.
Note: When using Twin Heavy or a later system.
NLGI GRADES OF GREASES USED IN CENTRAL LUBRICATION SYSTEMS
Mixing different grades of greases is not recommended. It may make it more difficult to pump the grease.
177176
ChEMICALS
Description No.
Window washing liquid PONSSe Logger’s 5L (-22°C) 0074338
Window washing liquid PONSSe Logger’s 20L (-22°C) 0074337
Window washing liquid PRO PLUS 200L (-22°C) 0074336
Galss cleaner spray 0029777
Cleaner spray 0029686
Rost-off 0029744
Cold spray 0029645
Tar spray 0061523
Vaseline spray 0042440
Instant glue 0030777
Threadlocker, medium strength 0055256
Threadlocker, high strength 0061860
Bearning fit 0062479
Hydraulic sealant 0055258
Liquid thread sealant 0056157
Surface sealant, orange 0062639
Super RTV-silicone 0062476
Silicone stick 0056146
Lock oil 0062478
Hand cleaner 1 L 0062480
Pineline power wash 10 L 0062020
Chain oil
PONSSE LOGGER’S BIO ChAIN OIL
Volume No.
10L vessel 0064130
200L barrel 0064130200
1000L container 00641301000
The product is 97% pressed rapeseed/rubseed oil, 2% raw rubber/vegetable oil product and 1%of a product which contains 54–58% of harmless acrylic polymer, and the rest comprises a compound of distillates (crude oil).
SITKO ADDITIVE
Volume No.
20L vessel 0066800
SITKO is an oil additive which is designed for toughening mineral-based oils into chain oils. Mixing ratio 4%.
SITKO is an oil additive intended for toughening clear waste oils into chain oils. Sitko provides oil with adherence, also ensur-ing a good lubrication for the flange and the top wheel at a high chain speed. SITKO easily mixes with oil at a normal repair shop temperature, andthe mixing can be carried out either mechanical-ly or by means of pressurised air.
20 litres of Sitko is good for 500 litres of high-quality chain oil.
177176
StickerS
StickersSticker set for vehicles ...................................................178Crane stickers ...............................................................178Loader stickers .............................................................178base machine frame stickers ..........................................178Harvester head .............................................................181Harvester head warning sticker .......................................181
178 179
�������
�������
STICKER SET FOR VEhICLES
Description No.
Set of PONSSe-stickers 0071186
CRANE STICKERS
Description No.
Danger zone 90 m P24125
Danger zone 300 ft P24168
LOADER STICKERS
Description No.
Danger zone 20 m P24144
Danger zone 100 ft P24246
Danger zone 70 m P14780
Danger zone 230 ft P14782
Danger zone 25 m P14781
Danger zone 90 ft P14783
No. Description
P13020
Read the Owner’s Manual before turn-ing the machine on using the master switch.
P12930
WARNING High pressure hoses. Read the Owner’s Manual before replacing the hoses.
P12974
WARNING Rotating components / equipment. Never open the machine’s engine cover when the engine is run-ning.
P12990
ReMeMBeR to attach the underbody protection plate using a security chain before closing it.
P12967
WARNING Hydraulical-ly operated steps. Dan-ger of slipping or getting crushed. Take care when entering or exiting the cabin. When stopping the machine, make sure that there are no obstacles / people under the auto-matic steps.
178 179
�������
�������
�������
StickerS
No. Description
P12939
WARNING Risk of getting crushed when turning the machine. Before turning the machine, always ensure that there are no unauthorised per-sons within the working area.
P12988
DANGeR Rotating cardan shaft. Re-member the safety distance when the machine is on.
P13015
The fuel used in the ma-chine must comply with eN 590. See the fuel quality requirements in Section 7.
P12935
WARNING Hot exhaust pipe. May cause severe burns. Do not touch the exhaust pipe when it is hot.
0037001
Machine towing point. Only the tow-ing point located on the bumper may be used when towing the machine.
No. Description
P29202
Manual extinguisher point.
P17784 Information on the functionality of the machine cabin lift pump. The cabin can be lowered by turning the pump lever to the left or raised by turning the lever to the right.
P38611 Control handle functions for a forward-er with mini handles. The sticker shows which loader and grapple movements will occur when using the control han-dles.
P38613 Comfort control handle functions for a sliding boom crane. The sticker shows which crane and harvester head move-ments will occur when using the control handles.
P39117 Comfort control handle functions for a parallel crane. The sticker shows which crane and harvester head movements will occur when using the control han-dles.
180 181
�������
No. Description
P40018 Minijoystick control handle functions for a sliding boom crane. The sticker shows which crane and harvester head movements will occur when using the control handles.
P40015 Minijoystick control handle functions for a parallel crane. The sticker shows which crane and harvester head move-ments will occur when using the cont-rol handles.
P40674 Control handle functions for Duals with Comfort control handles. The sticker shows which crane and harvester head/grapple movements will occur when using the control handles.
P38612 Control handle functions for Duals with minijoystick control handles. The stick-er shows which crane and harvest-er head/grapple movements will occur when using the control handles.
1281420 Control handle functions for harvest-ers with ICL control handles. The sticker shows which crane and harvester head movements will occur when using the control handles.
No. Description
1220167 Control handle functions for forward-ers with ICL control handles. The sticker shows which loader and grapple move-ments will occur when using the control handles.
P20162 Control handle functions for Duals with ICL control handles. The sticker shows which crane and harvester head/grap-ple movements will occur when using the control handles.
DANGeR. Never fill the load space above the log gate.
P13269
WARNING. Never turn the crane over the cabin because there is a danger of the crane pillar hoses get-ting stuck in between the log gate.
P15582
Control handle switches and their functions
P29185 First aid kit location and emergency exit.
180 181
StickerS
No. Description
P12927 Instruction sticker for the extinguishing system.
emergency exit and instructions on opening the window from the outside. Read section Opening the side window from outside the cabin of the Owner’s Manual.
P29170 General warning and instruction sticker on the front window
hARVESTER hEAD
No. Description
500949 Hydraulic valve, base sticker
P14774 Colour marking red & blue
P41959 H5 model sticker
P24485 H8 model sticker
P24477 H7 model sticker
P24471 Side sticker PONSSe
hARVESTER hEAD WARNING STICKER
No.
P24460
182 183
NEW LIFE FOR USEDSPARE PARTS
PONSSE REMANUFACTURED PARTS
A Logger´s best friendwww.ponsse.com
Quality and warranty of a new part Lower price An environmentally friendly choice
PONSSE Remanufactured Parts is a service developed by Ponsse, based on recycling and reconditioning used spare parts; return the damaged part to us and replace it by buying a remanufactured part which Ponsse has carefully reconditioned. In addition to the spare part that is as good as new, you will also receive a considerable refund for the returned part.
Remanufactured parts have the same quality and war-ranty as new parts, guaranteed by Ponsse. The price, however, is reduced. You will save both money and the environment.
182 183
Reman paRts
Reman partsEngine ..........................................................................184Transmission.................................................................185Cabin ...........................................................................186Hydraulics ....................................................................186Crane products .............................................................187Harvester head .............................................................187Middle pivot ..................................................................187Other items ..................................................................187
NEW LIFE FOR USEDSPARE PARTS
PONSSE REMANUFACTURED PARTS
A Logger´s best friendwww.ponsse.com
Quality and warranty of a new part Lower price An environmentally friendly choice
PONSSE Remanufactured Parts is a service developed by Ponsse, based on recycling and reconditioning used spare parts; return the damaged part to us and replace it by buying a remanufactured part which Ponsse has carefully reconditioned. In addition to the spare part that is as good as new, you will also receive a considerable refund for the returned part.
Remanufactured parts have the same quality and war-ranty as new parts, guaranteed by Ponsse. The price, however, is reduced. You will save both money and the environment.
184 185
Ponsse (IIS)
R: Core return
R: Core return
VR+R:Sales order
VR+R: Sales order
Subsidiary or dealerCustomer
ENGINE
Reman number Description Type Core number
0063747VR eNGINe ReMAN. MB OM906 LA 205KW 0063747R
0063166V eNGINe
0063665VR eNGINe
CAT0R9613VR CYLINDeR HeAD ReMAN. CAT CYLINDeR HeAD CAT0R9613R
DC9060107021V SYLINTeRINKANSI ReMAN. MB CYLINDeR HeAD
VL866740275V SYLINTeRINKANSI ReMAN. VALMeT CYLINDeR HeAD VL866740275R
DC9060961199V TURBOCHARGeR ReMAN.MB 170/180KW OM906
CAT0R4263VR START MOTOR ReMAN. CAT START MOTOR CAT0R4263R
CAT0R8684VR SOLeNOID ReMAN.CAT SOLeNOID CAT0R8684R
CAT0R1015VR WATeR PUMP ReMAN.CAT WATeR PUMP CAT0R1015R
* Reman selection within the European Union area.
REMAN PARTS
REMAN (Remanufactured) parts is a service developed by Ponsse. It is based on recycling and reconditioning used service parts, and you can use it to ensure uninterrupted use of your for-est machines, flexibly and affordably. You can return a damaged part to Ponsse and replace it by buying a REMAN part which Ponsse has carefully reconditioned. We will compensate you for the returned part when you purchase a REMAN part. You will quickly obtain a new part, and will also save money and the environment. Quality and service flexibility are ensured by Ponsse’s own re-conditioning and assembly centre.
Ponsse is constantly expanding its selection for remanufactured parts, so consult your nearest Ponsse service point if you cannot find the part you are looking for from the list.
184 185
Reman paRts
TRANSMISSION
Reman number Description Type Core number
00566481V BOGIe CASING ReMAN. CH151/60 COMPLeTe
00634861V BOGIe CASING ReMAN. BOG.CASING 151/71
00577821V BOGIe CASING ReMAN. BOG.CASING PO40/41
00614201V BOGIe CASING ReMAN. BOG.CASING 151/68
00618391V BOGIe CASING ReMAN. CH150R/63
CH1510640007V BOGIe CASING WITH HUBS ReMAN. BOG. CASING+HUBS 1
NAF2401228VR DIFFeReNTIAL GeAR ReMAN. PO40/PO41 NAF2401228R
00634863VR DIFFeReNTIAL GeAR ReMAN. CH151/71/7C 00634863R
00551073VR DIFFeReNTIAL GeAR ReMAN. CLARK-HURT 00551073R
NAF2401234VR DIFFeReNTIAL GeAR ReMAN. PO21/PO31/PO44 NAF2401234R
00566483VR DIFFeReNTIAL GeAR ReMAN.CH151/60 COMPLeTe 00566483R
00617023V DIFFeReNTIAL GeAR ReMAN. CH176HD356 7C
00637493V DIFFeReNTIAL GeAR ReMAN. CH176HD356 6C
NAF2401298VR DIFFeReNTIAL GeAR ReMANUFACTUReD PO39/SAP75 NAF2401298R
00618393V DIFFeReNTIAL GeAR ReMAN. 00618393
0069117V DIFFeReNTIAL GeAR ReMAN. NAF2401450 DIFFeRe
0069190V DIFFeReNTIAL GeAR ReMAN. NAF2401426 DIFFeRe
NAF2401339V DIFFeReNTIAL GeAR ReMAN. COMPLeTe FOR PO54
NAF2401354V DIFFeReNTIAL GeAR ReMAN. PO53 DIFFeReNTIAL
NAF60240100560VR DIFFeReNTIAL GeAR ReMAN. PO12 ReAR eND AND NAF60240100560R
00566482V HUB ReMAN. CH151/60 COMPLeTe
00634862V HUB ReMAN. CH151R/71/7C
00551072V HUB ReMAN. 00551072
00637492V HUB ReMAN. CH176HD356 6C
NAF2402158V PLANeTARY GeAR ReMAN.PO30/PO40/PO41/PO43
0069045V PLANeTARY GeAR ReMAN.PO40/PO41
0068169VR TRANSFeR BOX ReMAN. PO46/1 NAF VG75-50 0068169R
0067607V TRANSFeR BOX ReMAN. PO42/4 NAFVG35-571
0058703VR TRANSFeR BOX ReMAN. NAF PO46 VG75-501 0058703R
0059857VR TRANSFeR BOX ReMAN.CH 360/62 I=5.04/1. 0059857R
0061395V TRANSFeR BOX ReMAN.CH360/64 7CHD I=6.0
0065451V TRANSFeR BOX ReMAN. PO69 NAF VG75-568
0059694VR PUMP DIVIDeR GeARBOX ReMAN. 4380-25 W50 X I=0 0059694R
0026293VR TORQUe CONVeRTeR ReMAN. HS15 C272.7-42 0026293R
0026295VR TORQUe CONVeRTeR ReMAN. C2262-78 0026295R
NAF7305034V BeARING ReMAN. PO30/PO34/PO40/PO4
186 187
CABIN
Reman number Description Type Core number
1631691V COMPUTeR ReMAN.ePeC HUB MODULe FOR OPTI2
1631703V DRIVING TRANSMISSION NODe ReMAN.OPTICONTROL, eMC
1631676V DRIVING TRANSMISSION NODe ReMAN.OPTICONTROL
1631687V CRANe NODe ReMAN.28 OUT, OPTICONTROL, eMC
1631679V CRANe NODe ReMAN. OPTICONTROL
1631688V HARVeSTeR HeAD NODe ReMAN. OPTICONTROL, eMC
1631701V ACTIVe DAMPING NODe ReMAN. OPTICONTROL, eMC
161517V DISPLAY NODe ReMAN. AC UNITRONIC, OPTICONTROL
1631732VR DISPLAY MODULe ReMAN. ePeC 2, COLOUR 1631732R
1631702V SeAT NODe SAKAe ReMAN. OPTICONTROL, eMC, SAKAe
1631677V SeAT NODe SAKAe ReMAN. SAKAe
0058702V CONTROL HANDLe ReMAN. ReMNUF. ICL
0065543V CONTROL HANDLe ReMAN. SAKAe
1631717V DISPLAY ReMAN. PONSSe PC5 DISPLAY, 12,1" LCD
1630039V DISPLAY ReMAN. PONSSe 1000C
0021089V PILOT-OPeRATeD VALVe ReMAN. VOAC
0064099V CONTROL UNIT ReMAN. 35-0521 MCC eCC
0059987V CONTROL UNIT ReMAN. 89093B 24V WeBASTO
0012701V BLOWeR ReMAN. 24V
0068396V SeAT ReMAN. BeGe 3000C&F AIRVe
0063750V PRINTeR ReMAN. Canon i80
0066937V PRINTeR ReMAN. CANON IP100
P32211V DIAMeTeR MeASURING SeNSOR ReMAN. SAKAe HALL
hYDRAULICS
Reman number Description Type Core number
0058842VR HYDRAULIC MOTOR ReMAN. 516514 / 51V160RC8ND8M1RJ 0058842R
0064161V HYDRAULIC MOTOR ReMAN. R921810596 MCR5F62
0065848VR HYDRAULIC MOTOR ReMAN. 516514 51V160RC8ND 0065848R
0052201VR HYDRAULIC MOTOR ReMAN. 51V160R 0052201R
0058203VR HYDRAULIC PUMP ReMAN.R902063350 A11VLO19 0058203R
0061905VR HYDRAULIC PUMP ReMAN.02077883A11VLO190eP 0061905R
0064533VR HYDRAULIC PUMP ReMAN. R902077874 A11VLO1 0064533R
0067456VR HYDRAULIC PUMP ReMAN. A11VLO190eP2S/11L- 0067456R
0058147VR HYDRAULIC PUMP ReMAN. 511897 90R100FB5BC 0058147R
0055302VR HYDRAULIC PUMP ReMAN. A11VLO130DRS/10L 0055302R
0058195VR HYDRAULIC PUMP ReMAN. 515426 90L100FB 0058195R
0058173VR HYDRAULIC PUMP ReMAN. 02041099A11VLO130D 0058173R
0058444VR HYDRAULIC PUMP ReMAN. A11VLO130DRS/10L 0058444R
186 187
Reman paRts
OThER ITEMS
Reman number Description Type Core number
0062224VR CeNTRAL LUBRICATION PUMP ReMANUF. SM11395530 MLP 0062224R
P24313V SLeW BeARING ReMAN. P24313 BeAR
MIDDLE PIVOT
Reman number Description Type Core number
0058064VR BeARING ReMAN. BeARING 0058064R
0058157V ROLLeR BeARING ReMAN. BeARING
CRANE PRODUCTS
Reman number Description Type Core number
602D33VR BASe, LOWeR PART ReMAN. HN125 602D33R
P8247VR BASe UPPeR PART
0055113VR PLANeTARY GeAR ReMAN. RR810 12TeeTH 0055113R
0069101VR PLANeTARY GeAR ReMAN. RR810 13TeeTH 0069101R
0070643VR PLANeTARY GeAR RR810
0048052VR PLANeTARY GeAR ReMAN. RR750 0048052R
0067114VR PLANeTARY GeAR ReMAN. RR510SI GeAR+OMTS KIT
0067113VR PLANeTARY GeAR ReMAN. RR510 GeAR+BRAKe+OMTS KIT
0064228VR ROTATOR ReMAN. BBR15HD 0064228R
0057607V ROTATOR ReMAN. GV12S
0066003V ROTATOR ReMAN. BBR16HD
1631733V WeIGHT SeNSOR ReMAN. FORWARDeR, LOAD OPTIMIZeR, M12
Reman number Description Type Core number
0061902VR HYDRAULIC PUMP ReMAN. 02081041A11VLO130D 0061902R
0061906VR HYDRAULIC PUMP ReMAN.02081042A11VLO145DR 0061906R
0064468VR HYDRAULIC PUMP ReMAN. R902108351 A11VLO1 0064468R
0064575VR HYDRAULIC PUMP ReMAN. R902117049 A11VO14 0064575R
0057890VR PUMP OF THe DRIVING TRANSMISSION ReMAN. 90R130FD5B 0057890R
0067615V PUMP OF THe DRIVING TRANSMISSION ReMAN. 511897 90R100FB5BC
0067617V PUMP OF THe DRIVING TRANSMISSION ReMAN. 83007262 90R130FH5
hARVESTER hEAD
Reman number Description Type Core number
0066668VR HYDRAULIC MOTOR ReMAN. HYDRAULICMOTOR F12-030 0066668R
0064161V HYDRAULIC MOTOR ReMAN. R921810596 MCR5F62
0062838V PULSe SeNSOR ReMAN. LeNGHT MeASURING PULSe SeN-SOR
0066157V PULSe SeNSOR ReMAN. eMeTA MA300
0068321V PULSe SeNSOR ReMAN. HALL GeL248Y032 Le
188
PONSSE Performance packages
Rubber clutch replacement and pump divider gearbox bearing package ................................................................................190Opti+ maintenace package ..................................................................190Opti+ performance package .................................................................191PONSSE OPTI6 upgrade package for TP2000 harvesters ........................191PONSSE OPTI6 upgrade package for OPTINET/SILVEROPTI & 1000 machines ..........................................192Campaign product PONSSE OPTI6 Upgrade Package for TP2004 harvesters ......................................................................192Updating the IPS/PVC Knutsson crane control system ............................193Caliper3 calipers ...............................................................................193HS10 Drive transmission control modernisation .....................................194PONSSE Comfort Control Handle update ..............................................195Control handle update for harvesters equipped with MB-engine .................196Slagkraft brush cutter installation package for Ergo harvesters .................196Pump upgrade packages .....................................................................197Updating the driving hydraulics ............................................................198PONSSE Performance Packages – harvesters, duals and forwarders .. 199Tyre pressure guard ...........................................................................199Wisent 6w ➠ 8w ...............................................................................199PONSSE Performance Packages – duals and forwarders ................. 200PONSSE 10W ...................................................................................200PONSSE Facelift Packages ..................................................................200Opti6 PC system for forwarders .........................................................201Burger 1.6 and 2.0 clam bunk package for PONSSE machines .................202Bulldozer blade kits for forwarders .......................................................203Pump upgrade packages .....................................................................203Sleeve and pin set for middle pivot ........................................................204PO40 bogie casing axle and bearing kit ................................................205Spare part lifting boom C22+ and C44 .................................................207PONSSE Performance Packages – cranes and loaders ..................... 207Extension maintenance kit ...................................................................207Crane and loader reinforcement kit ......................................................208Reinforced Loglift sliding boom stand ....................................................209PONSSE Performance Packages – harvester heads ......................... 210Measurement wheel package ..............................................................210Hose package for H6/H7/H8 harvester head feed motors .....................212Hydraulic hose sets ............................................................................212SKF chain lubrication system ...............................................................213Tilt frame connection block packages ..................................................213H60/H60e feed roller packages ..........................................................214H60bw feed rollers ............................................................................214PONSSE CT+ chain tensioner ...............................................................215Harvester head sleeve and reinforcement sets .......................................215Harvester head bushing sets ...............................................................216Saw box light sets ..............................................................................216OPTI2-basic package for all base machines ............................................217OPTI2 harvester head specific modification package ................................218Retrofit colour marking equipment ........................................................219Colour marking packages ....................................................................219PONSSE Performance Packages - LoadOptimizer packages .............. 220PONSSE Performance Packages – for other manufacturers’ machines . 222OPTI6 basic package for all base machines ............................................222
UPDATESPonsse Performance Packages are designed for more
extensive basic maintenance and updates of forest machines. With Performance Packages it is possible to increase
productivity, efficiency and service life. The packages are designed entities, which makes it possible to update a
machine effortlessly and to save time and money. As a result of updates, you will have a more productive and economical
machine and extend its service life.
Ponsse PeRFoRMAnCe PACKAGes
IMPROVEMENT THROUGH
A Logger´s best friendwww.ponsse.com
188
UPDATESPonsse Performance Packages are designed for more
extensive basic maintenance and updates of forest machines. With Performance Packages it is possible to increase
productivity, efficiency and service life. The packages are designed entities, which makes it possible to update a
machine effortlessly and to save time and money. As a result of updates, you will have a more productive and economical
machine and extend its service life.
Ponsse PeRFoRMAnCe PACKAGes
IMPROVEMENT THROUGH
A Logger´s best friendwww.ponsse.com
191190
0067943 Changing the rubber clutch and the pump divider gearbox bearing
Rubber clutch 0073906
O-rings for pumps 0014307, 0060748
Pump divider gearbox parts
Bearings 0060191, 0060190, 0060192
Seal 0060193
Installation
Installation takes about 16 hours.
The installation is performed by a Ponsse-authorized service shop.
Ponsse’s maintenance service can now offer a service package for the clutch and pump divider gearbox in Ergos equipped with a Mercedes-Benz engine. The maintenance package consists of a rubber clutch, pump divider gearbox bearings, and required seals. It is recommend-ed that owners change the rubber clutch when the machine is two years old or when it has been used from 7,000 to 8,000 hours. If the clutch breaks during the busiest season, valuable work may be interrupted. This means that preventive actions are profitable!
Rubber clutch replacement and
pump divider gearbox bearing package
Early preventive maintenance protects against bigger costs.
To prevent downtime.
Economical service package ensures the reliable continuation of work.
0068106 Opti+ Maintenance Package
Replacing filter (0063593) and fan (0061180)
Backing up and replacing the hard drive (0065064)
Operating system reinstallation
Installation of Opti 4G and resetting settingsChecking physical condition and cleaning
Installation
The installation takes approximately 3 hours (P1016), including maintenance as well as installation of the operating system and Opti 4G.Installation of any other applications is separately charged on a case-by-case basis.
The installation is performed by a Ponsse-authorized service shop.
PONSSE Opti is a computer including modern technology, such as a heated hard drive and vibration control. The Opti Maintenance Package offered by Ponsse. Measuring Device Maintenance includes all components whose operational reliability decreases with age. The Maintenance Pack-age allows you to ensure that your machine is operational when-ever you need it.
Opti+ maintenace package
Ensure error-free functionality of your machine’s measuring device.
When periodically maintained, your Opti system will be more reliable; proactive maintenance.
When an expert inspects the system, hidden defects can be repaired before they cause any problems.
191190
PeRfORmance Packages - HaRvesteRs
0068107 Opti+ Performance Package
Main components
2.8 GHz Processor 0065517
1 Gb Memory module 0065518
Installation
Installation takes about 1 hour.
Contact your local PONSSE service centre to make an appointment. Our Measuring Device Maintenance unit will contact you to agree on when the Opti Maintenance Package can be installed.
The performance and speed of PONSSE Opti is increased to comply with the Windows XP OS and the current requirements of Opti 4G. The Opti+ processor is updated to 2.8 GHz and the RAM is in-creased to 1 Gb.
Opti+ performance package
Update your Opti+ measuring device to comply with modern requirements.
A processor and RAM update makes the use of new software faster.
The measuring device resources will be sufficient for using up-to-date antivirus software.
POnsse OPtI6 upgrade package for tP2000 harvesters
With the PONSSE Opti6 Upgrade Package, the ma-chine’s measuring device system can be updated to match modern technology.
After the installation, it is possible to use the latest harvester and forest company software.
Get the latest advanced technology for forest ma-chines.
PONSSE harvesters made in 2000–2003 which use the Opti2000 measuring device can be updated with the latest PONSSE Opti6 Upgrade Package. After the upgrade, you get the most advanced measuring device technology in forest machines, and can use the latest harvester and forest company software.
In addition, optional equipment for the Upgrade Package includes the PONSSE Comfort control handle and Caliper3 updates.The installation can be performed in two ways: either as a DC or AC installation.
DC network installation:Perform an AC-DC Arcnet Hub installation to adapt Opti6 and DC nodes to a single Arcnet network, in which case the old DC nodes will not be removed. The AC/DC Hub will reconcile the DC-con-nected Arcnet of the Opti2000 and Opti6 AC Arcnet. As a result, you get the PONSSE Opti4G, software version 4.602.
AC network installation:DC nodes are replaced by AC modules. The Arcnet network is up-dated to work with the Opti6-PC. In addition, you get the latest PONSSE Opti4G software version.
PONSSE OPTI6 upgrade package for TP2000 harvesters
DC network installation 0071921
AC network installation 0071922
Installation
The estimated installation time is 24 hours.
The installation is performed by a Ponsse-authorised service shop.
193192
PONSSE harvesters made in 2004 or later can be updated with the PONSSE Opti6 Upgrade Package. After the upgrade, you get the most advanced measuring device technology in forest ma-chines, and can use the latest harvester and forest company soft-ware. With the Upgrade Package, the PONSSE forest machine’s Opti+, Opti5 and Opti5+ PC can be updated to the latest version. Advan-tages of the PONSSE Opti6 over older computers include improved reliability and a touch screen which guarantees easy and smooth use. The PC is integrated inside the display unit, making the device simple and compact. Through the update, you get the latest PON-SSE Opti4G software version.Note: The crane and harvester head module may also need to be changed in forest machines equipped with the PONSSE Opti+ measuring device. These modules are not included in the price of the Upgrade Package.Optional equipment for the Upgrade Package includes the PONSSE Comfort control handle and Caliper3 updates.
See more detailed campaign information from spare parts bul-letin PB00105-ENG
campaign product POnsse OPtI6 Upgrade Package
for tP2004 harvesters
With the PONSSE Opti6 Upgrade Package, the ma-chine’s measuring device system can be updated to match modern technology.
After the installation, it is possible to use the latest harvester and forest company software.
Get the latest advanced technology for forest ma-chines.
PONSSE Opti6 Upgrade Package for TP2004 harvesters 0071746
Installation
The estimated installation time is 16 hours.
The installation is performed by a Ponsse-authorised service shop.
PONSSE harvesters which use the Ponsse OptiNet, SilverOpti or 1000 measuring device can be updated with the latest PONSSE Opti6 Upgrade Package. After the upgrade, you get the most ad-vanced measuring device technology in PONSSE forest machines, and can use the latest harvester and forest company software.
PONSSE OPTI6 upgrade package for optinet machinesThe machine’s old PC and display are replaced with a new PONSSE Opti6 PC with a touch screen. DC nodes are replaced by AC mod-ules, and the UPS unit is converted to act as a 12V input circuit for the PONSSE Opti6 PC, after which the new PC and power cable set can be installed in the cabin.
PONSSE OPTI6 upgrade package for silveropti and 1000 machinesForest machines operating without Arcnet can be updated to match modern standards with the PONSSE Opti6 Upgrade Package. The update is started by upgrading the base electricity up to the level of an OptiNet machine using a separate wire harness. The Opti1000 control device is removed, together with other optional computer equipment. The machine’s old PC and display are replaced with a new PONSSE Opti6 PC. The UPS unit is converted to act as a 12V input circuit for the new PC, after which the update is continued by installing the power cable set and the new PC in the cockpit. In addi-tion, a new wire harness. is installed for the harvester head’s valves.The Upgrade Package’s optional equipment includes the Caliper3 update.
POnsse OPtI6 upgrade package for OPtInet/sILveROPtI
& 1000 machines
After the installation, it is possible to use the latest harvester and forest company software.
With the PONSSE Opti6 Upgrade Package, the machine’s measuring device system can be updated to match modern technology.
Get the latest advanced technology for forest machines.
PONSSE OPTI6 upgrade package for OPTINET/SILVEROPTI & 1000 machines
PONSSE Opti6 Upgrade Package for OPTINET machines. 0071905
PONSSE Opti6 Upgrade Package for SilverOPTI & 1000 machines 0071906
Installation
The estimated installation time is 32 hours.
The installation is performed by a Ponsse-authorised service shop.
193192
PeRfORmance Packages - HaRvesteRs
Update packages for older PONSSE harvester and forwarder have been designed to replace the existing IPS or PVC Knutsson crane control system with an updated IQAN control system solution. Through the update packages, the customer receives more reli-able and modern crane control. In addition, new control handles comes with an update package. The manufacture of old control units for IPS control handles has been stopped, and no spare parts are available for the old crane control system. The forest machine’s computer can be updat-ed to follow the current standards by installing Update Package 0071854.
Updating the IPs/Pvc knutsson crane control system
Improved crane control
Modern retrofitting at low cost
Better spare part availability
IQAN TOC2 crane control + ICL con-trol handles + PONSSE Opti6 PC + BE-GE Airvent seat
0071854
The Update Package contains:• PONSSE Opti6 touch screen computer equipped with the
latest software and a printer• BE-GE 3000 airvent seat with a new stand and new ICL
control handles• QAN TOC2 control units for crane control• The required wire harnesses and new modules for the seat
and harvester head Available for the following OptiNet harvester models: HS10, HS16
IQAN TOC2 crane control
Harvesters
+ ICL control handles 0071855
+ Sakae control handles 0073192
• Available for harvesters with IPS crane control system and mini handles.
Forwarders
+ ICL control handles 0072160
+ Sakae control handles 0072462
The Update Package contains:• New control handles• IQAN TOC2 control units for crane control• The cabling requiredAvailable for harvester models: HS10, HS16, HS15Available: S10, S15, S16
Installation
The estimated installation time is 24–32 hours.
The installation is performed by a Ponsse-authorised service shop.
Measuring calipers are not included.
Strong structure with a magnetic measuring principle
Light and balanced
A user-friendly and easy-to-learn user interface
Secure the measurement accuracy of your machine with the latest Caliper3. The structure of Caliper3 is renowned for its durability, accuracy and maintenance-free measuring principle.
Caliper3 performance package with 65 cm calipers 0070529
Caliper3 performance package with 50 cm calipers 0070511
Installation
The estimated installation time is 1 hour.
The installation is performed by a Ponsse-authorised service shop.
caliper3 calipers
The packages are suitable for installation directly with the new OPTI6 measuring device or in place of Caliper+.The packages include calipers, cables for both installation options and fasteners.
195194
Hs10 Drive transmission control modernisation
A drive transmission modernisation kit is now available for PONSSE HS10 harvesters. The modernisation can be implemented if you want to modernise your harvester so that it will be similar to a new machine in terms of working conditions. The old FGR drive control units are no longer available, so if your old unit malfunctions, now is your chance to update your machine’s properties. The drive transmission system will be clearly easier to adjust with the new PDC (Ponsse Drive Control) drive transmission unit.The installation consists of removing the FGR drive control unit and replacing it with a PDC unit. The AVH, two relay cases, pedals and wire accelerator must also be removed.The installation is easier to do in a newer cabin, Sight2, that already includes a cable set for the installation.Old parts should be returned whenever possible.
A machine that is easier to maintain and adjust.
A modern control system.
Same features as in a new machine.
0068109 HS10 Drive transmission control modernisation
Main Components
Accelerator pedal 2 pcs 0056714
Regulator 1 pcs 0052204
PDC 1 pcs 161281
RPM sensor 1 pcs 1630843
Potentiometer 2 pcs 0055320
Main Components
Regulator fastener 1 pcs 250173
Articulation bearing 2 pcs 0021206
Fastening plate of pedal 2 pcs 1220073
RPM sensor fastening plate 1 pcs 149A35
M6-screw threaded bar 1 pcs 0008715
Driving direction selector 1 pcs 0066818
Driving direction selector holder 1 pcs 1220067
Cable set 1 pcs 0068108
Installation
Installation takes about 16 hours
The installation is performed by a Ponsse-authorized service shop.
195194
PeRfORmance Packages - HaRvesteRs
The PONSSE Comfort control handle update includes new handles, arm rests, seat cables and seat module, and a software upgrade at least to version 4.715. The update is available for PONSSE har-vesters as ball or mini handles. In PONSSE forwarders, the control handle update is implemented with mini handles.
Properly shaped handles and a good working postureThe shape, position and movement of the new ball handles and mini levers have been optimized to support the natural position and movements of the driver’s hands. In addition, the ball handles contain a cushion with side support which can be changed accord-ing to the driver’s hand size. It offers a firm grip and prevents the driver’s hand from sliding off the handle. The hand rests in a natu-ral position without needing to squeeze the handle. All three cush-ions are included in the update package.With PONSSE Comfort, arm rest adjustments are now easier and more effortless. The armrest can be separately adjusted in length and height, offering a good working posture for the driver.
Feel and durability of switchesThe control handles and armrests contain new switch buttons. The buttons have been selected on the basis of feel and durability.
POnsse comfort control Handle update
Improved ergonomics and adjustability of controls
Significantly reduces strain on your hands, neck and shoulders
Clearly readable switch buttons
0070877 PONSSE Comfort control handle update (ball handles)/harvesters
0070970 PONSSE Comfort control handle update (mini levers)/harvesters
0072762 PONSSE Comfort control handle update (mini levers) /forwarders
0075018 PONSSE Comfort control handle update (Gessmann)/ harvesters
The PONSSE Comfort control handle update is available starting from model series TP2004.
Installation
Installation takes about eight hours.
The installation is performed by a Ponsse-authorized service shop.
197196
The purpose of the package is to replace old control handles with the latest and the most modern ball handles. Since handles have developed significantly over the years, their ergonomic qualities are top class. The handles can be updated to harvesters in the TP2000 and TP2004 model series. In addition, old control han-dles wear over the course of time, in which case their control or-ders are not precise. TP2000 DC machines cover the model years 2001–2003. In connection with the update, the switches of arm rests (constant speed, locks, etc.) are now moved to the new ball handles. If the update of the ball handle is made to machines equipped with hori-zontal grip handles, the bench module must be changed at the same time (not included in the price of the handle package). In TP2004 AC machines, the new ball handle series fits directly in the place of old one, in which case the old handle series will be re-tained for backup purposes.
Ponsse has developed additional equipment packages for install-ing a brush cutter on Ergo harvesters. These installation packages include all the components required in the installation, except for the counterweight that must be purchased separately. Contact your nearest Ponsse service centre for price and avail-ability.
control handle update for harvesters equipped with
mB-engine
slagkraft brush cutter installation
package for ergo harvesters
Ergo harvesters can be used during summer cutting downtime periods for cutting roadsides and roadside brushes.
This improves the machine operating characteristics and reduces downtime.
The machine can be easily converted back to harvester use.
Better ergonomics, which has a very important ef-fect on productivity.
Handles have developed noticeably over the years.
Old handle series will be used as backup.
1631449 Seat module DC-machines
AM02902 Control handle set (Sakae mini/ball)
Main Components
Control handles 0065543 P12313
Switch panels 1631713 1631652
Cables P13235 P10954 P15178 P20358
Installation
Installation takes about 4 hours.
The installation is performed by a Ponsse-authorized service shop.
Slagkraft brush cutter installation package for Ergo harvesters
Main Components
Installation for HS16 harvesters 0068090
Installation for Ergos equipped with MB engines 0072179
Installation:
Installation takes about 80 hours.
Installation is performed by a Ponsse-authorised service shop or contractor.
197196
PeRfORmance Packages - HaRvesteRs
Pump upgrade packages
Improve the crane’s hydraulic power to correspond to modern production standards.
The pump upgrade increases reliability in everyday work with cranes.
Improved speed and power in the crane’s perform-ance.
For service parts, pump upgrades are now available for the first machines equipped with Mercedes Benz engines, upgrading a re-liable replacement machine or a slightly worn machine to corre-spond to the requirements of modern harvesting. With the pump upgrade, the pump’s displacement increases, apart from package 0067783. This improves the machine’s performance. Even when the loader is used simultaneously with many other movements, its movement speed will not slow down. The upgrade improves the crane’s performance, speed and power at lower engine revolu-tions.
0067783 Ergo crane pump Parker 145 cm3 ➠ Rexroth 145 cm3
For service parts, pump upgrade packages are now available for PONSSE harvesters for upgrading the crane pump from Parker P2 to Rexroth.Rexroth 145 cm3 pump is durable and safety solution replacing old and worn Parker P2 hydraulic pump.Old pump should be returned whenever possible.
0067730 Beaver crane/harvester pump 145 ➠ 190
With the Beaver installation package, a larger cooling circulation pump must also be installed, providing more efficient cooling for the simultaneous use of the crane and harvester head. With the pump upgrade, the pump’s displacement increases, im-proving the machine’s performance. Even when the loader is used simultaneously with many other movements, its movement speed will not slow down.Old pump should be returned whenever possible.
0067729 Ergo crane pump 130 ➠ 145cm3
The pump upgrade package upgrades the Ergo 130 cm3 pump into a 145 cm3 pump. Old pump should be returned whenever possible.
Main Components
Pump 1 pcs 0064575
Hose assembly 1 pcs L1156
Seals and o-rings
The pump upgrade packages are available for machines with the following serial numbers: Ergo 050001-050213
Main Components
Pump 1 pcs 0061905
Pump 1 pcs 0061321
Hose assembly 1 pcs L1584
Seals and o-rings
The pump upgrade packages are available for machines with the following serial numbers: 040001–040087
Main Components
Pump 1 pcs 0064575
Hose assembly 1 pcs L0274
Hose assembly 1 pcs L0435
Hose assembly 1 pcs L2391
Hose assembly 1 pcs L1156
Seals and o-rings
The pump upgrade packages are available for machines with the following serial numbers: Ergo 050369-050571
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorized service shop.
199198
Driving efficiency as in new machinesImproved driving comfort and controlSavings in fuel consumption
Updating the driving hydraulics
Modern hydraulic components are very durable and reliable. However, they are not everlasting. Through preventive mainte-nance, you can ensure that your machine operates efficiently also in the future. By replacing machine parts in a preventive manner, you can achieve cost savings.
The packages include:• New drive motor and pump• Hoses for driving hydraulics• Hydraulic filters
The replacement of the crane pump is an option. If your machine is equipped with a Parker crane pump, your machine will require modifications. Modification materials and work are not included in the price.
CARIBOU, GAZELLE, WISENT or ELK 0069677
Main components
Pump of the driving transmission 0067615
Hydraulic motor 0065848
Hose assembly P18651 P19818
BUFFALO 030285-030902, 0150003-0150039 0069678
Main components
Pump of the driving transmission 0067617
Hydraulic motor 0065848
Hose assembly P16537 P16536
BUFFALO 0310001->, 0320001-> 0074927
Main components
Pump of the driving transmission 0067617
Hydraulic motor 0070432
Hose assembly L2316 L2317
ELEPHANT 0073301
Main components
Pump of the driving transmission 0067620
Hydraulic motor 0065657
Hose assembly L2031
Elephants with Sauer drive transmission.
BEAVER 0069679
Main components
Pump of the driving transmission 0067615
Hydraulic motor 0065848
Hose assembly P25974 P25975
ERGO 6W, ERGO 8W 0070189
Main components
Pump of the driving transmission 0067618
Hydraulic motor 0065848
Hose assembly P11090 P18697
Installation
Installation takes about eight hours.
The installation is performed by a Ponsse-authorised service shop.
199198
Wisent 6w ➠ 8w
0068054 NAF, serial numbers 090035 ➠
Bogie 1 pcs 0068168
Protection plate 2 pcs P19093
Tyre 4 pcs 0061800
Brake hydraulics
Double fitting 4 pcs 0015731
Seal ring 4 pcs 0034447
T-fitting 2 pcs 0015909
Hose 3 pcs L0021
Hose 1 pcs L9029
Other parts can be taken from front axle (underbody shield, bogie fastening screws, etc..)
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorized service shop.
Better off-road driving characteristics.Better carrying capacity.More stable working.
It is now possible to replace the front axle of the six-wheel Ponsse Wisent forwarder with a bogie axle. The update to the bogie will of-fer more stability to daily working, improve off-road characteristics as the bogie conforms better to the terrain, and improve carrying capacity.Old parts should be returned whenever possible.
PONSSE Performance Packages – harvesters, duals and forwarders
tyre pressure guard
The real-time tyre pressure monitoring system is available for PONSSE and other forest machines. The tyre pressure monitoring system consists of a display unit, external antenna and sensors/transmitters attached to tyres.The sensors are attached to tyre valves, from where they send pressure and temperature data wirelessly to the display unit as an RF signal. The display unit receives and processes the incom-ing data and displays it on the screen. The display unit presents alarms if the tyre pressure level is incorrect so that the driver can take immediate action.With the system, the driver can maintain the correct tyre pres-sure in order to minimise fuel consumption and tyre wear, and to avoid punctures.
Minimised tyre wear and fuel consumption
No punctures
Tyre pressure guard for 6w forest machines 0072864
Tyre pressure guard for 8w forest machines 0072865
Tyre pressure guard for 10w forest machines 0072866
PeRfORmance Packages - HaRvesteRs, DUaLs anD fORWaRDeRs
201200
PONSSE Performance Packages – duals and forwarders
POnsse 10W
0067210 10w Wisent (NAF)
Main components
Hub 2 pcs P31757
Wheel 2 pcs 0070448
Rear frame extension 1 pcs P27592
Rear axle 1 pcs P29372
Fastening plates and accessories
Installation
Installation takes about 4 hours.
The installation is performed by a Ponsse-authorized service shop.
0072309 PONSSE Elk and Buffalo 10w (with a hydraulic additional axle) Available for the machines with new type of rear frame.
Main components
Hub 2 pcs P31757
Wheel 2 pcs 0070448
Rear frame extension 1 pcs P44657
Rear axle 1 pcs P45420
The carrying capacity of the machine can also be utilised in soft terrain
The low surface pressure makes it easier to move in the terrain
Significantly less damage to trees and the ground
The PONSSE 10w solution is based on a simple and reliable idea. A third pair of wheels and tracks perfect for the conditions are mount-ed behind the rear bogie. This transforms the forwarder into a ten-wheeler with a very wide ground contact area that easily moves loads, even in boggy stands. The PONSSE 10w is available with a fixed additional axle for the PONSSE Wisent forwarder and a hydrau-lic additional axle for the PONSSE Elk and Buffalo models. The 10w solution available for the PONSSE Elk and Buffalo models rises and lowers hydraulically, in which case the additional stress to the struc-ture caused by large loads when driving on hard ground can be elimi-nated by lifting up the rearmost pair of wheels.
POnsse facelift Packages
PONSSE Facelift packages
PONSSE Beaver 040001-040167 0073123
PONSSE Beaver 040168-040331 0071659
PONSSE Ergo 050001-050327 0073122
PONSSE Ergo 050328-050752 0071660
PONSSE Buffalo 030001-030140 0073124
PONSSE Buffalo 030141-030293 0071701
PONSSE Buffalo 030470-> 0073938
PONSSE Wisent 6w/ 8w
090001-090043, 080001-080214 0071702
Installation
The estimated installation time is 8 hours.
The installation is performed by a Ponsse-authorised service shop.
A modern look for your forest machine with PONSSE Facelift Packages
Upgrade the look of your forest machine
Get the latest facelift
With the PONSSE Facelift Packages, the forest machine’s look can be upgraded to match the latest models, and its colour can be changed from grey to yellow. The packages contain a new engine cover, side boxes, light racks, top plate and new base machine stickers.
201200
PeRfORmance Packages - HaRvesteRs, DUaLs anD fORWaRDeRs
Easier time and efficiency tracking
Enables the reporting of short-distance transported timber volumes
Enables adding GPS positioning and map software
PONSSE forwarders can be seamlessly integrated into the wood procurement management system by equipping them with a high-performance Opti6 PC and Opti4G forwarder software. This ena-bles nearby transport to be planned and implemented and road-side storages monitored almost in real-time.The software includes the OptiControl machine control system with operator profiles and data transfer and reporting software. Furthermore,a forest-company specific map, data transfer applica-tion or GPS positioning can be connected to the system.
Time and efficiency trackingTime and efficiency tracking is a standard feature in PONSSE for-warders equipped with an Opti6 PC.The system collects information on time distribution, production, machine operation and fuel consumption. The operator logs onto the system at the beginning of the work shift. As the work progresses, the software automatically collects information, asking the reasons for breaks separately, where de-sired. The operator can read all of the reports on the display.The software produces DRF report files that can be read using the OptiReport software in the forwarder and the office.Starting TP2004 model series.
Opti6 Pc system for forwarders
0071839 Opti6 PC system for forwarders
Installation
Installation takes about eight hours.
The installation must be performed by a Ponsse-authorised service shop.
203202
Burger 1.6 and 2.0 clam bunk package for POnsse machines
Machine can be used in tree length and cut-to-length method.
A functional package when combined with a Ponsse crane.
Easy handling of whole trees.
Reliable German design.
Burger clam bunks used by Ponsse can be fitted to following Pon-sse forwarders Elk, Buffalo, BuffaloKing and Elephant.It is easy to move long logs around when the clam bunk is a fixed accessory on the forwarder. The clam bunk is also well suited to moving poles, and various assortments can be moved in the or-der best suited to the conditions. The finished details and high-quality materials of the clam bunk ensure that it can be implemented without using any additional devices or a servicing hall, and the fitting will not take up the con-tractor’s working time. The clam bunk can be easily lifted with the forest machine’s own crane and connected to the hydraulic sys-tem with quick-couplings.
Burger 1.6m2 package 0068080 (Elk & Buffalo)
Burger 2.0m2 package 0068081 (BuffaloKing & Elephant)
Components
Clam bunk Burger 2.0 1 0068896
Clam bunk Burger 1.6 1 0068895
Stand Clam bunk burger 1,6 / 2,0 1 P32848
Stopping plate Stand, Clam bunk 2 P32869
Lock plate Stand, Clam burger 4 P32867
Allen screw M20x40 12.9 DIN912 DC 4 0047191
Hex screw M24x80 10.9 DIN933 8 0061251
Hex nut M24 10.9 DIN934 8 0012520
Washer M24 Hv DIN6916 8 0055138
Hex screw M20x120 10.9 DC DIN931 36 0008130
Hex nut M20 10.9 DC DIN934 36 0007394
Cable set, clam bunk valves (Valves - Loader base) CLAM VALVES 1 PS0256
Components
Hose assembly 083-4100-90l-00l-0 2 L2361
Angle fitting R1/2U/SU-R1/2U 90 2 0044782
Quick connector 6-kP31BS HANSEN 2 0062112
Quick connector 6-hP31BS-SL hANSEN 2 0062111
Hose shield SS54 1 2 0021225
Reducing fitting R1/2-R3/4 2 0015677
USIT 3/4 2 0017335
Cable set 1 PS0255
keyboard cable set, S10CA/S16/S15BI 1 P12046
Hose assembly 1 L2412
Hose assembly 1 L2410
Hose stand To clam bunk 1 P20068
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorized service shop.
203202
PeRfORmance Packages - DUaLs anD fORWaRDeRs
Bulldozer blade kits for forwarders
Sturdy bulldozer blade for moving soil, snow, etc.
Excellent for clearing storage sites, for example
Can also be used as an aid when working on a slope to stop the machine from sliding
Equipped with a floating function: the ground will not be disturbed when removing snow, etc.
The bulldozer blade can be used to move soil, snow or other ma-terials. The hydraulically-operated bulldozer blade is mounted on the machine front frame, and it is controlled with the loader con-trol handle.The blade also includes a floating function that prevents the soil from being damaged during snow ploughing and other similar ac-tivities. The package includes everything you need for installation: the bull-dozer blade, cylinders, hoses, a bulldozer blade valve and the com-ponents for the K170LS directional valve.
Pump upgrade packages
Improve the crane’s hydraulic power to correspond to modern production standards.
The pump upgrade increases reliability in everyday work with cranes.
Improved speed and power in the crane’s perform-ance.
For service parts, pump upgrades are now available for the first ma-chines equipped with Mercedes Benz engines, upgrading a reliable replacement machine or a slightly worn machine to correspond to the requirements of modern harvesting.With the pump upgrade, the pump’s displacement increases (apart from packages 0067781 and 0067782), improving the machine’s performance. Even when the loader is used simultaneously with many other movements, its movement speed will not slow down. The upgrade improves the crane’s speed and power at lower engine revolutions. Old parts will be returned to Ponsse in the upgrade.
0067731 Buffalo loader pump 130/145 ➠ 190
Main Components
Pump, 1 pcs 0064533
Suction hose 3,5”, 1 pcs 0058690
Seals and o-rings
Available for machines with the following serial numbers: Buffalo 030001–030140
PONSSE Elk/ Wisent/ Gazelle 0069701
Main Components
Bulldozer blade AM00233
Bulldozer blade hydraulics AM02310
PONSSE Buffalo all models 0069776
Main Components
Bulldozer blade AM02001
Bulldozer blade hydraulics AM02310
PONSSE Elephant/ElephantKing 0069777
Main Components
Bulldozer blade AM00519
Bulldozer blade hydraulics AM02310
Installation
Installation takes about eight hours.
The installation must be performed by a Ponsse-authorised service shop.
205204
0067781 Gazelle & Wisent loader pump Parker 145 cm3 ➠ Rexroth145 cm3
Main Components
Pump, 1 pcs 0064532
Hose assembly, 1 pcs L0274
Hose assembly, 1 pcs L2234
Hose assembly, 1 pcs L0166
Hose assembly, 1 pcs L1174
Seals and o-rings
Available for machines with the following serial numbers Gazelle 0110001-0110070, Wisent 080084-080226
0067782 Elk & WisentDual loader pump Parker 145 cm3 ➠ Rexroth 145 cm3
Main Components
Pump 1 pcs 0068446
Hose assembly 1 pcs L2234
Hose assembly 1 pcs L1174
Hose assembly 1 pcs L0166
Fuel tank, 1 pcs P21632
Seals and o-rings
Available for machines with the following serial numbers: Elk 0130001-0130023, 0140001-0140097, WisentDual 010001-010034
0067780 Buffalo loader pump Parker 145 cm3 ➠ Rexroth190 cm3
For service parts, pump upgrade packages are now available for PONSSE harvesters for upgrading the crane pump from Parker P2 to Rexroth.With the pump upgrade, the pump’s displacement increases from 145 cm3 to 190 cm3 in Buffalo, this improving the machine’s per-formance. Even when the loader is used simultaneously with many other movements, its movement speed will not slow down, as it did when using the previous 145 cm3 pump. Where as the flow rate of the smaller pump has been sufficient for using the loader, the larger pump enables using lower working revolutions for achieving the same flow rate. Other models pump’s displacements are still same than before 145 cm3. Rexroth 145 cm3 pump is durable and safety solution replacing old and worn Parker P2 hydraulic pump.
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorized service shop.
sleeve and pin set for middle pivot
Remove middle pivot clearances with the new set.
Stress to the main bearing of middle pivot will decrease.
The middle pivot is as good as new after repair.
The sleeve and pin set is available in Ponsse service centres for Ponsse forwarders. The package is designed for machines in which the bearing housing of the pivot frame in the rear frame has be-come loose. At the same time, it is recommended to change the parts of the upper and lower pins because wearing strains the pin bearings.The package includes a new bottom sleeve for the pivot frame and the upper and lower pins with all their sleeves and bearings. Dur-ing installation, the original lower bearing housing of rear frame is removed by flame cutting, after which the new lower sleeve is weld-ed in place. After welding, frames can be joined with new pins and sleeves. The final result is a middle pivot as good as new.
0068052 Sleeve and pin set for middle pivot
P16928 Middle pivot repair sleeve
Main Components
Upper pin + sleeves
Hex screw, 2 pcs 0062843
Lock washer, 2 pcs 0059985
Spacer plate, 2 pcs P19643
Conical sleeve, 1 pcs P17545
Reinforcement ring, 2 pcs P17543
Seal, 2 pcs 0025146
Loader pump Parker 145 cm3 ➠ Rexroth190 cm3
Main Components
Pump, 1 pcs 0064533
Attachment parts
Suction hose 0058690
Seals and o-rings
Available for machines with the following serial numbers: Buffalo 030141-030322
205204
PeRfORmance Packages - DUaLs anD fORWaRDeRs
Upper pin + sleeves
Allen screw, 10 pcs 0036756
Cover, 1 pcs 270822
Adjustment washer, 1 pcs 270618
Axle pin, 1 pcs P17538
Articulation bearing, 2 pcs 0016500
Intermediate ring, 1 pcs P26477
Lower pin + sleeves
Ring nut, 1 pcs 0037691
Conical sleeve, 2 pcs 270624
Pin, 1 pcs 270623
Articulation bearing, 1 pcs 0016503
Bottom screw, 1 pcs 270626
Cover, 1 pcs 270309
Tightening key, 1 pcs ST0192
Allen screw, 4 pcs 0043730
Allen screw, 2 pcs 0043740
Available for machines with the following serial numbers:
WisentDual 0100001 - 0100027
Elk 6W 0130001 - 0130018
Elk 8W 0140001 - 0140067
Buffalo 030001 - 030284
BuffaloDual 070001 - 070079
Buffaloking 0120001 - 0120041
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorised service shop or a contractor.
PO40 bogie casing axle and bearing kit
Prevents downtime
Prevents damage to gears
The bearing and axle set for the PO40 bogie casing contains axle, nail bearings and new seals for bogie casing hatches. The pack-age has been designed for repairing the bogie casing if the current pins have started to wear down and damage the nail bearing. The package contains parts for one bogie casing.Replacing the bearing and axle set during service prevents down-time caused by gear damage. The parts should be replaced at regular intervals.
0068803 PO40 bogie casing axle and bearing kit
Main Components
Axle NAF7321125
Needle bearing NAF1130269
Installation
Installation takes about four hours.
The installation is performed by a Ponsse-authorised service shop or a contractor.
207206
Extension maintenance kit
Extension maintenance kits for PONSSE cranes and loaders.
Regularly replaced maintenance packages and check-ups prevent the boom from being damaged.
Improved working comfort – the extension slides smoothly and accurately.
Separate extension maintenance kits are now available for PON-SSE harvester cranes and forwarder loaders. Worn glide pads and chains may cause quicker wearing in boom parts where the exten-sion maintenance kit helps in preventing wearing. When installing the extension maintenance package, the booms are checked and worn parts replaced. The extension maintenance package for harvester cranes and for-warder loaders contains slide pads and a chain set. Furthermore, the price of the HN200, C2, C4 crane includes the harvester cir-cuit’s pressure and return hose, and the K70M+ loader includes grapple and rotator hoses inside the extension.
0067838 Extension maintenance kit K70+ M
Main Components
Sliding pad kit, 1 pcs 0063212
Fleyer chain, 1 pcs AM01608
Hose assembly, 4 pcs L0672
0067837 Extension maintenance kit K90M/K100M
Main Components
Sliding pad kit, 1 pcs 0063211
Fleyer chain, 1 pcs AM02122
PONSSE Performance Packa-ges – cranes and loadersSpare part lifting boom
C22+ and C44
Stronger structure
Longer service life
Correspondence with the production model
Spare part lifting booms for C22+ and C44 cranes have a struc-ture similar to the C44+ crane. Replacing the lifting boom with a newer model guarantees a longer lifetime.The boom wall thickness has been increased to 10 millimetres, and the end of the boom is cast.When replacing the boom, the cables’ inductive sensors and parts of the central lubrication system must be replaced by new com-ponents. The new spare part lifting boom package is available in two different models depending on the boom length (10 m/11 m), and both of them include the components required for the up-grade.
Spare part lifting boom C22+ and C44
Main Components
C22+/C44 110, C44 85 0073856
C22+/C44 100 0073857
Installation
The estimated installation time is 24 hours.
PErfOrmaNCE PaCkagES - CraNES aNd lOadErS
209208
0067833 Extension maintenance kit HN125
Main Components
Sliding pad kit, 1 pcs 0063214
Fleyer chain, 1 pcs AM02124
0067836 Extension maintenance kit HN200, C2, C4
Main Components
Sliding pad kit, 1 pcs 0063215
Fleyer chain, 1 pcs AM02125
Hose assembly, 2 pcs L1873
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorised service shop or a contractor.
crane and loader reinforcement kit
Reinforcement kit HN200, C2, C4
Main Components
Reinforcement plate, left P38510
Reinforcement plate, right P38511
Support plate, left P39489
Support plate, right P39483
Support plate P28593
Reinforcement kits minimise cracks and strains directed at cranes and loaders.
Using the reinforcement kit, the machine can be used in more demanding conditions.
The crane/loader can be updated to correspond to a new production model.
K90/K100 reinforcement plate
Main Components
vertical pillar reinforcement plate P30006
vertical pillar reinforcement plate, left side P43816
vertical pillar reinforcement plate, right side P43782
vertical pillar support P43820
0067804 Reinforcement kit HN125
Main Components
Reinforcement plate, 1 pcs P31562
Reinforcement plate, 2 pcs P31808
Reinforcement plate, 1 pcs P31809
Reinforcement plate, 1 pcs P32170
HT00857
209208
PeRfORmance Packages - cRanes anD LOaDeRs
Reinforced Loglift sliding boom stand
More durability at logging sites.
Fast and easy update that improves durability.
We have designed a more rigid stand for the Loglift L220 parallel crane, familiar to PONSSE Beaver and PONSSE Ergo. The old stands have been updated by Ponsse with new reinforced used stands that are as good as new. Installation of the reinforced and renewed stand achieves clearly better results than mere welding of cracks. With the reinforced stand, your machine is quickly ready for profitable work and the installation is simple. The old stand is left with Ponsse to be reinforced.
P18352VR Factory repaired parallel crane stand
Main Components
Reinforcement piece P37821
Reinforcement piece P37820
Reinforcement sleeve P37825
P18352R Stand frame charge/remuneration
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorized service shop.
Reinforcement plates are now available for PONSSE cranes and load-ers, improving durability even further. When working with forest ma-chines, the majority of work is performed using cranes and loaders and, as a result, the strength, movements and controls of cranes and loaders are in a key position when it comes to the efficiency of har-vesting.The strength and movements of cranes and loaders produce great strains on booms. In these situations, Ponsse’s new reinforcement pads are a good solution in preventing strains.The reinforcement pads can be easily welded onto the cranes during maintenance.
Installation
The installation is performed by a Ponsse-authorized service shop.
C55 Luffing boom reinforcement
Main Components
Reinforcement piece (luffing boom right) P38301
Reinforcement piece (luffing boom left) P38316
C55 Lifting boom reinforcement
Main Components
Reinforcement plate (right) P40473
Pipe fastener P40474
Reinforcement plate (left) P40475
Reinforcement plate P28410
211210
Measurement wheel packages for PONSSE harvester heads.
A complete replacement part – minimises idle time.
Quick and easy to install to replace a broken part.
The old measurement package can be used as spare parts.
Ready-assembled measurement wheel packages are now available for PONSSE harvester heads. These competitively priced package helps customers in returning their machines to productive working. Because the measurement device package is already assembled, all parts are installed in place at low cost compared with single parts pur-chased separately. Furthermore, the measurement device packages are easy and quick to install.If a measurement wheel package breaks, all parts should be replaced simultaneously. Thus, the acquisition of a complete package saves time and money.
0066373 Measurement wheel package H73e (three-line assembled measurement wheel)
Main Components
Length measuring device frame, 1 pcs P24085
Metering wheel, 1 pcs P18936
measurement wheel package
PONSSE Performance Packages – harvester heads
00663731 Measurement wheel package H73e (maritime pine measurement wheel)
Main Components
Length measuring device frame, 1 pcs P24085
Metering wheel, 1 pcs 230433
Pulse sensor, 1 pcs 0068321
Grooved shaft, 1 pcs P17267
Pulse wheel, 1 pcs P11921
0066376 Measurement wheel package H73 (traditional 32-teeth measurement wheel)
Main Components
Pulse sensor, 1 pcs 0068321
Grooved shaft, 1 pcs P17267
Pulse wheel, 1 pcs P11921
211210
Performance Packages - cranes and loaders
0067712 Measurement wheel package H6 / H7 / H8 (three-line assembled measurement wheel)
Installation
Installation takes about 1-4 hours.
The installation is performed by a Ponsse-authorized service shop or contractor her/himself.
Main Components
Length measuring device frame, 1 pcs P25609
Gear ring, 3 pcs P19254
Pulse sensor, 1 pcs 0066157
0071490 Measurement wheel package H5
Main Components
Length measuring device frame, 1 pcs P42085
Gear ring, 3 pcs P19254
Pulse sensor, 1 pcs 0066157
0073214 Measurement wheel package H6 / H7 / H8 With wide measuring wheel, suitable for multi-stemming.
0066378 Measurement wheel package H60 (three-line assembled measurement wheel)
Main Components
Length measuring device frame, 1 pcs P17413
Metering wheel, 1 pcs 230360
Pulse sensor, 1 pcs 0062838
Main Components
Length measuring device frame, 1 pcs P10073
Metering wheel, 1 pcs P18936
Pulse wheel, 1 pcs P11921
Pulse sensor 0068321
00663801 Measurement wheel package H53 (two-line maritime pine measurement wheel)
Main Components
Length measuring device frame, 1 pcs P15840
Metering wheel, 1 pcs P16297
Pulse sensor, 1 pcs 0062838
213212
Hose package for H6/H7/H8 harvester head
feed motors
Corresponds to the latest production modelImproved hose durabilityEasy installation and maintenance
A hose package is designed for H6/H7/H8 harvester head feed mo-tors, which permits upgrading the feed motor hoses to correspond to the latest production model, at the same time increasing the ser-vice life of the hoses.The package improves hose durability and makes functioning, installa-tion and maintenance of the hoses easier. Routing and protection of the hoses have been improved.The packages include new hoses for the motors, hydraulic fittings, feed motor dust jackets, and weldable parts to the harvester head frame.
Hydraulic hose sets
Hydraulic hose sets
Main Components
H5 480001➠ 0071451
H6 670001–670316 0072385
H6 670317➠ 0073445
H6 ORFS hoses 0074333
H7 ORFS hoses 0074832
H7/ H7Euca 770001 ➠, 780001➠ 0072387
H7/ H7Euca 760001 ➠, 810001➠ 0073791
H8 830001–830058 0074256
H8 830059–830101 0074269
H8 840001➠ 0074270
Installation
The estimated installation time is 8 hours.
Hydraulic hose sets are available for H5, H6, H7, H7Euca and H8 harvester heads to easily replace all hoses of the entire harvester head. The sets are suitable for all chain tensioner models.With a complete hose set, the harvester head is easy to maintain.
Including hoses for the following:- Stump treatment- Chain tensioner (CT+, C30 and Manual)- Saw chain lubrication (not for grease lubrication)- Rotator- Tilt frame connection block- Tilt- Front knives- Rear knives- Saw rotation- Saw feed- Feed roller feeding- Feed roller pressing- Measuring wheel retraction (H5)
213212
PeRfORmance Packages - HaRvesteR HeaDs
tilt frame connection block packages
Improves durability of hoses
No more unnecessary hose fraying
Hoses easier to replace
PONSSE H6, H7, H7euca and H8 harvester heads can be updat-ed with a connection block package that combines the hoses be-tween the crane boom end and the harvester head. The packages include the connection block, hoses, harvester cable and the nec-essary connectors.The packages aim to improve performance of the hose in between the boom end and the harvester head, to prevent hoses from get-ting trapped in between the rubber pads and the tilt frame and prevent unnecessary hose fraying.A taller tilt frame and the necessary components must also be or-dered for H6 harvester heads.
Tilt frame connection block packages
H6 connection block package for C22, C33 or C44 crane 0070365
H6 connection block package for C2 or C4 crane 0070368
H7/H8 connection block package for a C33, C44 or C55 crane 0070639
H7/H7euca/H8 connection block package for a C4 or C6 crane 0070640
Harvester head serial numbers
H6: 670001->670179
H7: 770001->770385
H8: 830001-> 830064
H7 Euca:780001-> 780086
Installation
Installation takes about six hours.
The installation must be performed by a Ponsse-authorised service shop.
skf chain lubrication system
Easy-to-use system
Lower lubricant consumption
Low-cost method
The SKF chain lubrication system is available for PONSSE harvester heads, in which case the saw chain and saw bar can be lubricated using grease instead of chain oil.This method saves costs and produces a good lubrication result. In addition, this method saves the environment because no lubricant will access the terrain when sawing.With the factory setting, the grease consumption is approximate-ly 400 g / 2 shifts. This can be adjusted from the dosing module.
SKF chain lubrication system
Main Components
H5/ CT+ chain tensioner 480079 ➠ 0072751
H6/ CT30 chain tensioner 670001➠ 0072067
H6/ CT+ chain tensioner 670001➠ 0072068
H7, H7Euca/ CT+ chain tensioner 770001➠, 780001➠
0072097
H7, H7euca, H8/ CT, CT+ chain tensioner 760005 ➠, 810001 ➠, 840006 ➠ 0072916
Installation
The estimated installation time is 4 hours.
The installation is performed by a Ponsse-authorised service shop.
Recommended grease options:
NESTE NLGI 00 -30…+40°C (For extreme winter conditions) 0033804
PONSSE NLGI2 LOGGER’S GREASE 12X420 ML 0073806
215214
Grip and efficiency
Quick installation
An update package is now available for H60/H60e harvester heads equipped with a roller feed for upgrading the feed roller so-lution to be as good as new. The package contains new feed roll-ers, bearings and chains. You can also choose a solution with a whole new roller frame, including all parts, if the old frame has been damaged.The roller feed is an extremely efficient solution with a firm grip. With the update package, you can retain its efficiency.Feed roller packages are ready-assembled, which makes installa-tion quicker.
H60/H60e feed roller packages
H60/H60e feed rollers (including the roller frame) 0068740
H60/H60e feed rollers (excluding the roller frame) 0068741
Installation
Installation takes about two hours.
The installation is performed by a Ponsse-authorised service shop or a contractor
H60/H60e feed roller packages H60bw feed rollers
Improved feed force
Better handling of twisted and thick-barked trunks
Fast installation – ready-made package
A feed roller/feed motor package that will update the features of the harvester to the feed rollers currently in use in H60bw is now available for H60/e harvester heads.The package includes everything you need for installation: large feed rollers, roller frames, hoses and larger 630cc feed motors.The package will improve the harvester head’s feed capacity, which means that the harvester head can better handle twisted and thick-barked trunks – even the thickest branches will not disturb the feeding of the trunk. You can keep your old bogie rollers and their frames, and you can easily switch back to them if required.
H60bw feed rollers 0069953
Installation
Installation takes about four hours.
The installation is performed by a Ponsse-authorised service shop or the contractor.
215214
Performance Packages - harvester heads
harvester head sleeve and reinforcement sets
Improved reliability of operation and accuracy
A sleeve and reinforcement set has been designed for PONSSE harvester heads. The aim of the set is to make the frame of a worn harvester head as good as new.The repair kits are divided into two parts: lug sheets and sleeves which are recommended to be changed at intervals 15,000 hours, and a set containing a front delimbing knife and bottom iron plate for H60 harvester heads, and a bottom iron plate for H73 harvester heads, which is recommended to be changed at inter-vals of 5,000 hours.
H53/ H53e
15000h Set H53, 53315 ➠15000h Set H53e, 54001 ➠ 0068840
H60
5000h Set 0068050
15000h Set, 64201➠ 0068049
H73/ H73e
5000h Set P17633
15000h Set H73, 73249 ➠15000h Set H73e, 74001➠ 0068051
H6
15000h Set, 670001➠ 0068837
H7
15000h Set, 770001➠ 0068838
H8
15000h Set, 830001➠ 0068839
Installation
Installation takes about 16 hours.
The installation is performed by a Ponsse-authorized service shop.
Ponsse ct+ chain tensioner
Improved saw sensoring
Pulse sensoring for the saw bar position
Built-in adjustable flange limiters
Bearing lubrication with chain oil => Lubrication not required
The automatic PONSSE CT+ chain tensioner contains a built-in pressure line for the tensioning piston and an oil line for chain lu-brication, resulting in improved reliability.The PONSSE CT+ chain tensioner package contains a new tension-er, the hoses required for the saw motor, and a sensor cable. Saw bar fasteners are to be ordered with a separate order number.The tensioner can also be installed in older harvester head mod-els. PONSSE Opti4G software version 4.710 of later is required.
PONSSE CT+ chain tensioner package 0071092
Saw bar fasteners (always ordered separately):
Jet-Fit 0071307
64-75 0071308
3-4” chain 0071309
Seal set for CT+ chain tensioner 0072725
Installation
The estimated installation time is 6 hours.
The installation is performed by a Ponsse-authorised service shop.
217216
Harvester head bushing sets
Bushing sets
H53 0063231
H60 0063230
H73 0063232
H73e 0067217
H5 0072717
H6 0070214
H7 0067218
H8 830001-830101 0067219
H8 840001-> 0074963
Installation
Installation takes about 8 hours.
The installation is performed by a Ponsse-authorised service shop or a contractor,
Improved reliability of operation and accuracy
For Ponsse service parts, bushing packages are now available for all Ponsse harvester heads to help to update old and worn bush-ings with new ones. As a result, clearances in the harvester head can be removed and the reliability of operations improved.The packages include all bushings for a harvester head. Delimbing knives, feed roller frame, length measuring device frame, bush-ings for cradle and reaction bar, in which case this part of the har-vester head can be renewed to be as good as new.The WB series bushings used in Ponsse’s bushing packages en-dure heavy loads and impact load, and have good lubrication char-acteristics due to lubricant holes.
saw box light sets
Improved efficiency in working
Improved visibility
Working in a dark forest is made easier by installing lights to the saw box. Using the lights, it is easier to perceive the location and surroundings of the harvester head, such as obstacles when felling trees.The installation kits include LED lights, protective casings, fitting supplies and the cable set required.
Sahakotelon valosetit
Main Components
H7/ H8 760122➠, 840044➠ 90 cm saw box 0074837
H7/ H7Euca 760122➠, 810001➠ 75 cm saw 0074836
H6 670551➠ 0074835
Installation
The estimated installation time is 4 hours.
217216
PeRfORmance Packages - HaRvesteR HeaDs
OPtI2-basic package for all base machines
Effective and simple measuring and control system for all base machines.
Includes all necessary features for effective and reliable harvesting.
Ponsse has designed the Opti2 basic package for all types of base machines. The package includes a full Opti2 measuring device and it consists of a HUB bus distribution module, a display module, a control wheel, control and preset buttons and required cable se-ries.Opti2 is a simple, effective measuring and control system for PONSSE harvester head retrofits. It contains all of the features required for effective, productive harvesting when automatic mark-ing for bucking, wireless data transfer or map systems, for exam-ple, are not required. Special attention has been paid to the func-tions required for the harvesting of eucalyptus and acacia. At the moment, it is possible to control the H8, H7, H60, as well as the 550 and 650 harvester heads using Opti2.The control wheel, control buttons and preset buttons are con-nected to the seat module.The seat module reads data from button pushes and the rotator’s handle controls, and sends the data to the CAN bus. Pumps are connected to the HUB bus distribution module. In addi-tion, the module controls currencies and the CAN bus. The display module compiles statistics and controls feeding. With the help of the display module the user can monitor the system’s status, condition and make adjustments to the system.Harvester head sensor actuators are connected to the harvester head module. The module controls the harvester head and reads harvester head inputs. The module, sensors and actuators are de-livered in a package delivered with the harvester head.
AM01530 Opti2 basic package for all base machines
Main Components
Modules 1631732 1631691 1631692
Cable sets PS0269 PS0270
PS0272 PS0337 PS0543 PS0393
PS0382 PS0441 PS0377
Control handles and keyboard for harvester head cotrol(Note! Crane control remain as it was)
Display
Measuring tape 161620
Measuring calipers 0065450
Measuring unit since following serial numbers
H60 601141 ➠
H60e/bw 64870 ➠
H7 770149 ➠
H8 830051 ➠
Installation examples
volvo 210, CAT, etc., track-based excavators.Don’t forget to ask about the possibility of installation on other harvester-based forest machines.
Installation
Installation takes about 16 hours.
The installation is performed by a Ponsse-authorized service shop.
219218
OPtI2 harvester head specific modification package
Ponsse’s efficient harvester heads can be utilised in all machines.
Efficient harvesting with the Opti2 system.
Ponsse has designed harvester head specific change packages H60E, H7 and H8 for harvester heads. With the help of the pack-ages, harvester heads can be installed to machines equipped with the Opti2 measuring system. The packages include all nec-essary electrical equipment, cable series and control module. The Opti2 system itself is a control and measuring system de-signed for felling and cutting trees, recording output statistics, and giving the driver information about the workflow and the func-tionality of the system itself.At the moment, it is possible to control the H8, H7, H6, H73e, H60e and H53e harvester heads.
0067988 H6, H7, H7Euca and H8
Main Components
Modules 1631690
Cable sets
PS0497 PS0496 PS0383 PS0266
0068854 H53/H53e
Main Components
Modules 1631690
Cable sets
PS0635 PS0542 PS0266 PS0383
0067989 H60
Main Components
Modules 1631690
Cable sets
PS0541 PS0542 PS0266 PS0383
0068856 H73/H73e
Main Components
Modules 1631690
Cable sets
PS0635 PS0542 PS0266 PS0383
Installation
Installation takes about 8 hours, depending on theharvester head model.
The installation is performed by a Ponsse-authorized service shop.
219218
PeRfORmance Packages - HaRvesteR HeaDs
colour marking packages
0067785 Colour marking package
(H53, H60, H73, H5, H6 H7, H8)
Main Components
valve block, 1 pcs P20193
Piston, 2 pcs P17278
Check valve, 4 pcs 0060663
Check valve, 2 pcs 0059215
Coil, 2 pcs 0057263
Installation
Installation takes about 1-4 hours.
The installation is performed by a Ponsse-authorized service shop or contractor her/himself.
A reliable and simple structure.
100% marking reliability – quickly and easily.
A complete replacement part – minimises idle time.
Ready-assembled hydraulic colour marking packages are now avail-able for Ponsse harvester heads. The purpose of the packages is to operate colour marking in harvester heads as quickly as possi-ble. Old and fixed blocks dry up easily when unused, in which case the installation of a new block is a good and reliable solution. The diameter of the colour pistons is wider than that of Ponsse’s competitors, so bleeding is easy, and wood can be marked quickly and accurately. The non-returning valves in the nozzles stop the colour from leak-ing from the colour hoses, resulting in 100% marking reliability first thing in the morning, starting from the very first log.NOTE: To be ordered separately with the complete package.
+ Colour marking block for all harvester heads 0067785
Installation
Installation takes about eight hours.
The installation is performed by a Ponsse-authorised service shop.
Retrofit colour marking equipment
H60
60986-601055 0068710
601056-601086 0068709
H53
53114 ➠ 53487 0068722
53488 ➠ 0068723
H53e
54001 ➠ 0068729
H73e
740001 ➠ 740548 0068798
740549 ➠ 0068730
H73
73458 ➠ 0068718
H6
670001 ➠ 0068738
H7
770001 ➠ 0068462
H8
830001 ➠ 0068462
Available for all PONSSE harvester head models
A handy retrofit package
Retrofit colour marking equipment packages are available for PONSSE harvester heads. The colour marking packages contain all of the parts required: hoses, colour marking tanks for the pivot frame, a colour marking knife with nozzles and the colour marking block that needs to be ordered with a separate number. The installation packages have been designed for harvester heads that do not contain a factory-installed colour marking system. Har-vester heads can be quickly set up to be ready for colour marking using the new package solutions.
221220
POnsse Performance Packages - LoadOptimizer packages
The PONSSE LoadOptimizer system weighs, sorts, saves and manages load data at all working stages.
LoadOptimizer packages are designed to endure extreme conditions and heavy use.
LoadOptimizer offers a whole new view on loading: weight has value.
The new PONSSE LoadOptimizer is accurate, durable and easy to use in precise weighing when loading and unloading wood, fuel wood and other materials. LoadOptimizer packages are now available for new and used Ponsse machines, as well as other forest machines.Fully automatic weighing during loading and unloading, and load detail registration fulfill the measurement demands for fuel wood, for example. Load data is always up to date. The clear graphic display, help texts and auditory signals instruct the user during loading.If the PONSSE LoadOptimizer installation packages are installed in forwarders of a make other than Ponsse, two packages will be required (base machine package and loader package).These two packages will be needed also for PONSSE machines with K90- and K100 series cranes/loaders.PONSSE machines with K70+ loader will need only one package. It includes base machines and loader parts for LoadOptimizer in-stallation.Weighing scale (P30769) is available as additional equipment for all LoadOptimizer pakcages.
Contact your nearest Ponsse service center for price and avail-ability.
00672531 LoadOptimizer package K70+ S (Wisent, Elk, Gazelle)
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P34380
Tree species selection keyboard, 1 pcs PS0453
00676381 LoadOptimizer package for old PONSSE models
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Weight sensor, 1 pcs 1631733
Slewing sensor kit, 1 pcs 0066316
Tree species selection keyboard, 1 pcs PS0453
0067722LoadOptimizer package for other manufacturers’ machines
Two packages needed. Base machine package and crane package + additional equipments.
Crane package (slewing sensors)
kesla/Cranab 0067718
Loglift 0067719
Ponsse 0066316
Additional equipments
Connector box 0067720
Connector box (Loglift) timber trucks only 0067721
Cable set & voltage reducer PS0398
USB-cable 0067172
Printer 0066937
Colour cartridge 0066956
00672541 LoadOptimizer package K70+ M (Wisent, Elk, Gazelle)
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P25265 P32895
Tree species selection keyboard, 1 pcs PS0453
0069009 LoadOptimizer package K70M
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P25265
221220
PeRfORmance Packages - HaRvesteR HeaDs
POnsse Performance Packages - LoadOptimizer packages
00672601 LoadOptimizer package, crane (K90Dual)
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P25265
0067255 LoadOptimizer base machine package(Buffalo, BuffaloDual, Elephant)
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Tree species selection keyboard, 1 pcs PS0453
0067256 LoadOptimizer base machine package(Elk, WisentDual)
Main Components
Hub module, 1 pcs 1631691
Display, 1 pcs 1631732
Tree species selection keyboard, 1 pcs PS0453
00672571 LoadOptimizer package, loader (K90S, K100S)
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P12631 P32893
00672591 LoadOptimizer package, loader(K90M, K100M)
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P12631 P32893
Installation
Installation takes about 16-24 hours.
The installation is performed by a Ponsse-authorized service shop.
0069011 LoadOptimizer package, loader (K90M+, K100M+)
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P32893
0069010 LoadOptimizer package, loader (K90S+, K100S+)
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P12631
222
PeRfORmance Packages - LOaDOPtImIzeR Packages
OPtI6 basic package for all base machines
Effective and versatile measuring and control system for all base machines.
Includes all necessary features for effective and reli-able harvesting.
Ponsse has designed the Opti6 basic package for all types of base machines. The package consists of a display and seat module as well as an Opti6 measuring device. Opti6 is a simple and versatile meas-uring and control system for PONSSE harvester head retrofits. Opti6 includes all of the features required for effective, productive harvesting when automatic marking for bucking, wireless data trans-fer or map systems are required. Opti6 meets all the modern har-vesting requirements of forest companies. Harvester head sensor actuators are connected to the harvester head module. The module controls the harvester head and reads harvester head inputs. The module, sensors and actuators are delivered in a package delivered with the harvester head.
POnsse Performance Packages – for other manufacturers’ machines
AM03705 Opti6 basic package for all base machines
Main Components
Opti6 measuring device AM03404
Required cable series
PS0382 PS0493
Control handles PS0956 PS0957
Opti6 is fully compatible with all PONSSE harvester heads.
Installation examples
Track-based excavators, most harvester-based base machines. Ask if Opti6 can be installed on your machine!
Installation
Installation takes about 16 hours.
The installation is performed by a Ponsse-authorized service shop.
Note: Measuring calipers are not included in the Opti6 basic package.
222
With Fleet Management, machine entrepre-neurs can at any time check the location of the forest machine on the map or
the current situation of the stand. Forest machines equipped with data transfer and GPS transmit the data automatically to an Internet-based reporting service.
The Fleet Management service reports enable you to follow the machine engine working hours, the
amount of fuel in the tank, the amount of wood har-vested in the active stand, and machine productivity and fuel consumption for different drivers. Chaining the stands becomes easier when the machine drivers themselves can order low loaders needed for ma-chine transfer.
CUSTOMER SERVICE 24/7PONSSE FLEET MANAGEMENT
BENEFITS OF ThE SERVICEPREdICTABILITyYou can estimate the need for spare parts and main-tenance for individual machines.
MAChINE TRANSFERSYou can order carriages to the right place at the right time.
REAL-TIME MONITORINGUp-to-date information can always be easily read. For example, entrepreneurs can check which driver is operating which machine, and what stand they are working on, and can monitor the machine’s fuel consumption.
PONSSE Mobile Fleet Management makes it possible to use the system with mobile devices (phones and tablets with the Windows, iOS or Android operating systems).
PONSSE Mobile Fleet Management is available free of charge from the relevant application stores (Apple App Store, Google Play, Windows Phone Store), and it uses the credentials of the Fleet Management service. Enrollment in the Fleet Management service is required to use Mobile Fleet Management.
MOBILE FLEET MANAGEMENT FOR MOBILE dEVICES
225224
Clothing ...................................................................225Winter work clothing ................................................225Women’s winter jacket with a hood..................................225Winter jacket ...............................................................225Winter open overalls .....................................................225Winter overall ..............................................................226Children’s winter coveralls ..............................................226Winter safety clothing ...............................................226Winter jacket, high-visibility colour ...................................226Winter trousers, high-visibility colour ...............................226Summer work clothing ..............................................227Jacket .........................................................................227Bib trousers .................................................................227Raincoat ......................................................................227Trousers ..................................................................227Cargo trousers .............................................................227Trousers with kneepadpockets ........................................228Shorts ........................................................................228Summer safety clothing .............................................228Jacket, high-visibility colour .............................................228Trousers, high-visibility colour ..........................................228Cotton overal, cotton .....................................................229Overall, nylon ................................................................229Leisure time clothing .................................................229Children’s summer coveralls, nylon ..................................229Safety vest ...................................................................229Winter jacket ..............................................................230Jacket ........................................................................230Softshell jacket ............................................................230Knitting, Scorpion .........................................................230Hoodie ........................................................................231Boule shirt ...................................................................231T-shirt .........................................................................231T-shirt for women .........................................................232T-shirt .........................................................................232T-shirt, Scorpion ...........................................................232Ponsse Kids pyjamas .....................................................232Size chart ................................................................233Accessories ..............................................................233Knitted cap for women ..................................................233Scorpion Knitted cap .....................................................233Knitted cap ..................................................................234Knitted cap ..................................................................234Winter cap ..................................................................234Knitted cap, kids ...........................................................234Tube scarf ...................................................................234Fleece gloves ...............................................................234Baseball cap Scorpion ...................................................235Baseball cap ................................................................235Camo cap ....................................................................235Leather belt .................................................................235Other ......................................................................235Backpack stool .............................................................235Ski package .................................................................235Duffle bag ....................................................................236BackBack ....................................................................236Reino slippers ..............................................................236Children’s slippers .........................................................236Towel ..........................................................................236PONSSE seat cover .....................................................236Kuksa .........................................................................237Tuju ............................................................................237Vacuum flask................................................................237Vacuum flask................................................................237Flashlight .....................................................................237Umbrella .....................................................................237PONSSE scale model .....................................................238Tracks for the PONSSE scale model .................................238PONSSE-Dog ................................................................238PONSSE Bear ...............................................................238PONSSE Football ...........................................................238Silencer .......................................................................238
PONSSE Collection
225224
PONSSE COllECtiON
PONSSE Collection
For Ponsse Collection products, we believe customers appreciate quality and services. The clothes can be selected and purchased at Ponsse outlets.
Clothing
Winter work clothing
Ponsse Collection offers high-quality clothing de-signed for work and leisure-time. We have re-ceived positive feedback on our products and expanded the collection according to our cus-tomers’ needs.
The materials and details in the work clothing respond to even the most demanding needs. As an example of durability, we provide a lifelong guarantee for the seams in work clothing.
The leisure collection is based on a sporty col-lege fashion. Practicality has been considered in product design, not forgetting the trends.
WiNtEr jaCkEt
No.
971
A black and gray jacket with yellow effects. Ponsse prints on the chest and on the back of the neck. Warm insulation. Plenty of pockets: Chest pockets, double hand pockets, two inside breast pockets and a mobile pocket. Reflectors at the back and in the front. ID pocket can be taken out of the chest pocket.
Size: S-XXXXL Colour: black/grey
Material: 70% polyester/30% cotton
WiNtEr OPEN OVEraLLS
No.
973
Black open overalls. Two thigh pockets, a pen pocket and a mobile pocket. Rises high at the back. Warm insulation. Reflectors at both sides and adjustable straps. One Ponsse print.
Size: C46–C68 Colour: black/grey
Material: 70% polyester/30% cotton
WOmEN’S WiNtEr jaCkEt With a hOOd
No.
830
A black and jacket with yellow effects. Ponsse prints on the chest and on the back of the neck. Warm insulation and hood. Plenty of pockets: Chest pockets, double hand pock-ets, two inside breast pockets and a mobile pocket. Reflec-tors at the back and in the front. ID pocket can be taken out of the chest pocket.
Size: S–XXL Colour: black/yellow
Material: 70% polyester/30% cotton
226 227
Winter safety clothing
WiNtEr jaCkEt, high-ViSibiLity COLOur
No.
949
A black and hi-vis yellow jacket. Visibility class 2. Ponsse prints on the chest and on the back of the neck. Warm Thinsulate insulation. Plenty of pockets: Chest pockets, double hand pockets, two inside breast pockets and a mobile pocket. Reflectors at the back and in the front. ID pocket can be tak-en out of the chest pocket.
Size: S–XXXXL Colour: yellow
Material: 70% polyester/30% cotton
WiNtEr OVEraLL
No.
972
A black overall with yellow effects. Plenty of pockets: Chest pockets, hand pockets, a mobile pocket and inside breast pocket. Warm insulation. Hood comes off if needed. Zippers and waterproof fabric at both legs.
Size: S–XXXXL Colour: black/grey
Material: 70% polyester/30% cotton
ChiLdrEN’S WiNtEr COVEraLLSNo.
972
A stitched lining, flexible waist, and zippers on the front and the legs. A breast pocket, a 25-mm reflector strip on the right leg, a hood, and the PONSSE logo on the left breast and on the back.
Sizes: 100-160 Colour: black/yellow
Material: 70% polyester/30% cotton
WiNtEr trOuSErS, high-ViSibiLity COLOurNo.
904
Black and hi-vis yellow overalls. Visibility class 1. Normal waist from the front and rises higher from the back. Two thigh pockets, a pen pocket and a mobile pocket. Warm Thinsulate insulation. Adjustable straps. One Ponsse print.
Size: C46–C68 Colour: black/yellow
Material: 70% polyester/30% cotton
226 227
PONSSE COllECtiON
CargO trOuSErS
No.
140
Functional work trousers. Thigh-, mobile-, carpetfnife- and markerpocket. Normal waist. Ponsse print. Comfortable fabric.
Size: C46–C68 Colour: black
Material: 70% polyester/30% cotton twill
jaCkEt
No.
404
Plenty of pockets. Hand-, mobile-, carpetknife- and marker-pocket and a inside breast pocket. Reflectors at back and in the front. Ponsse print on the chest and on the back of the neck. ID pocket can be taken out of the chest pocket.
Size: S–XXXL Colour: black/grey
Material: 65% polyester/35% cotton twill
Summer work clothing
trousers
raiNCOat
No.
839
A black coat with yellow effects. Prints on chect and back. Handpockets. Reflectors front and back. Taped seams. Breathable material in which is comfortable to work in.
Size: XS–XXXL Colour: black
Material: 74 % pes, 26 % pu
bib trOuSErS
No.
866
Black sleeveless overall with two cargo pockets, front pock-ets, pen pocket, mobile pocket and back pocket. Knee pad pockets inside. Horizontal/vertical pull-out ID-card pocket in cargo pocket. Rises high at the back, rib-knit at the back. Reflectors and adjustable straps. Adjustable hem 4 cm. Ponsse print on cargo pocket.
Size: S–XXXL Colour: black
Material: 70% polyester 30% cotton
228 229
jaCkEt, high-ViSibiLity COLOur
No.
907
A black and hi-vis yellow jacket. Visibility class 2. Ponsse prints on the chest and on the back of the neck. Plenty of pockets: Chest pockets, double hand pockets, two inside breast pockets and a mobile pocket. Reflectors at the back and in the front. ID pocket can be taken out of the chest pocket.
Size: S–XXXXL Colour: black/yellow
Material: 70% polyester/30% cotton
trOuSErS, high-ViSibiLity COLOurNo.
908
Black and hi-vis yellow trousers. Visibility class 1. Two thigh pockets, a pen pocket and a mobile pocket. One Ponsse print.
Size: C46–C68 Colour: black/yellow
Material: 70% polyester/30% cotton
ShOrtS
No.
867
Black shorts. Cordura reinforcements in kneepad pockets. Front pockets, patch pocket, cargo pocket. Ruler and pen pockets, large back pockets and kneepad pockets. But-ton and loop for a knife, belt loops. 3/4 lenght. Print on the cargo pocket.
Size: S–XXXL Colour: black
Material: 65% polyester 35% cotton
Summer safety clothing
trOuSErS with kneepadpocketsNo.
905
Comfortable trouserd. Very flexible and breathable fabric. Many yellow littele details. Plenty of pockets including two thigh pockets, kneepad pockets and a mobilepocket. Ponsse print.
Size: C46–C68 Colour: black
Material: 46 % co, 38 % eme (t400 fiber), 16 % pes
228 229
PONSSE COllECtiON
Leisure time clothing
ChiLdrEN’S SummEr COVEraLLS, NyLONNo.
979 (100-160)
Summer coveralls without a lining, a flexible waist, adjustable sleeve ends with buttons, a metallic zipper on the front, two front pockets, two breast pockets with metallic zippers, a hammer loop, one back pocket with a flap, a measuring pocket, and the PONSSE logo on the back.
Sizes: C100–160 Colour: black/yellow
Material: 70% polyester/30% cotton
SafEty VESt
No. Size
0072806 S
0061256 M
0061258 L
0061259 XXL
Colour: yellow
Material: Polyester
COttON OVEraL, COttON
No.
977
Black overall. Plenty of pockets. For example a pen-, marker- and carpet knife pocket. Ponsse prints on the chest and on the back of the neck.
Size: S-XXXXL Colour: black
Material: 100% cotton
OVEraLL, NyLON
No.
981
Black overall out of water and dirt repellent fabric. Plenty of pockets. For example a pen-, marker- and carpet knife pocket. Ponsse prints on the chest and on the back of the neck.
Size: S-XXXXL Colour: black
Material: 70 % polyester/30 % bomull
230 231
SOftShELL jaCkEt
No.
936
A softshell jacket with light reflective piping on the sides. Comfortable to wear, soft and very breathable material. An illustration of a PONSSE forest machine on the back.
Size: XS–XXXXL Colour: black
Material: Softshell
kNittiNg, SCOrPiON
No.
849
Size: XS-XXL
Material: 100% cotton
WiNtEr jaCkEt
No.
948
A comfortable and warm padded Softshell jacket with a detachable hood. Pre-curved sleeves. Drawstring hem and adjustable Velcro at sleeve ends.Breast and side pockets with zippers. Two inside breast pockets with zippers and one netted pocket.
Size: XS-XXXL Colour: black
Material: 100% polyester with a TPU layer Lining: 100% polyester fleece 260 g/m2 Filling: 100% polyester 80 g/m2
jaCkEt
No.
883
Waterproof material, seams are not taped. Warm insulation. Storm flap. Zippered chest pocket, front pockets with flaps and zippered inside breast pocket. Back pleats gives comfort to move. Straight hem with back slits. Ideal with a suit jacket.
Size: S-XXXL Colour: black
Material: 80 % polyester, 20 % polyurethane
230 231
PONSSE COllECtiON
t-Shirt
No.
816
Black T-shirt with a Ponsse logo on the chest
Size: S–XXL, 120–160 Colour: black
Material: 100% cotton
bOuLE Shirt
No.
871
Size: S-XXXXL Colour: black
Material: 35% cotton/65% polyester
hOOdiE
No.
953 black
Stylish black PONSSE hoodie. Comfortable and warm to wear thanks to the fleece lining. Zipper pockets, grey strings in the hood. PONSSE logo on the chest.
Size: XS–XXXL Colour: black
Material: 55% polyester, 45% cotton
hOOdiE
No.
954
PONSSE hoodie, women’s cut. Usability is guaranteed by the comfortable fleece lining and zipper pockets. PONSSE logo on the left chest.
Size: XXS–XXL Colour: black
Material: 55% polyester, 45% cotton
232 233
PONSSE kidS PyjamaS
No.
832
Size: 100–140
Material: flannel
t-Shirt, SCOrPiON
No.
870
Black T-shirt
Size: XS-XXXL, 120, 140, 160
Material: 100% cotton
t-Shirt fOr WOmEN
No.
967
Colour: black
Size: S–-XXL
Material: 100% cotton
t-Shirt
No.
963
Black T-shirt with a Ponsse logo on the chest
Size: S–XXL, 120–160 Colour: black
Material: 100% cotton
232 233
A
B
C
D
PONSSE COllECtiON
Size chart
46 48 50 52 54 56 58 60 62 64 66 68
chest (A) 92 96 100 104 108 112 116 120 124 128 132 136
waist (B) 78 83 88 93 98 103 108 113 118 123 128 133
hip (C) 96 100 104 108 112 116 120 124 128 132 136 140
inside leg. (D) 81 82 83 84 85 86 87 88 89 90 91 92
Length 172 174 176 178 180 182 184 186 188 190 192 194
46 48 - 50 52 54 - 56 58 - 60 62 - 64 66 - 68
S M L XL XXL XXXL 4XL
chest (A) 90 98 104 110 118 126 134
waist (B) 75 85 93 100 110 120 130
hip (C) 94 102 108 114 122 130 138
inside leg. (D) 81 83 84 86 87 89 91
Length 171 175 178 181 185 189 193
accessories
The Ponsse Collection accessories, like the clothing, are made of high-quality materials and de-signed exclusively for Ponsse.
kNittEd CaP fOr WOmEN
No.
9761
Ponsse logo on the side of the cap
One size Colour: Black&White
SCOrPiON kNittEd CaP
No.
851 Colour: yellow
850 Colour: black
One size
234 235
fLEECE gLOVES
No.
911
Soft and warm fleece gloves with suede palms. An embroidered PONSSE logo on the gloves.
One size Colour: black
kNittEd CaP
No.
976
A wool/acrylic cap with a cotton lining and without a tassel. An embroidered PONSSE logo on the front.
One size Colour: black
kNittEd CaP
No.
9762
A wool/acrylic cap with a cotton lining and without a tassel. An embroidered PONSSE logo on the front.
One size Colour: orange
kNittEd CaP, kidS
No.
828 black
829 white
tubE SCarf
No.
869
A multipurpose Ponsse tube scarf for leisure time and sports. Protects against cold, wind and sun.
One size Material: 100% polyester
WiNtEr CaP
No.
863
One size
234 235
879 880
PONSSE COllECtiON
baSEbaLL CaP
No.
962
A baseball cap of brushed heavy twill cotton. A PONSSE 3D printing on the front.
Colour: black
baSEbaLL CaP SCOrPiON
No.
843
Colour: black
CamO CaP
No.
940
LEathEr bELt
No.
994
A black 40-mm-wide leather belt with the PONSSE logo on the buckle. PONSSE printing also on the black package.
baCkPaCk StOOL
No.
881
Other
Ski PaCkagE
No.
OPTIGRIP 879
RETRO OPTIGRIP 880
A ski package including skis, bindings, poles and a ski bag. The bindings are already attached to the skis. 160 cm.The ski bag is also available separately with the order number 882.
236 237
tOWEL
No.
990
Material: 100% cotton
PONSSE SEat COVEr
Description No.
Low 0055236
Tall 00552361
Tall, sticker openings for an airbag on the side 0068231
With the PONSSE logo. Water-resistant surface. Material: polyester/cotton
rEiNO SLiPPErS
No.
958
Original REINO slippers with the Ponsse pattern! Sizes: 20–48
ChiLdrEN’S SLiPPErS
No. Size
909 M, L
Material: Felt
duffLE bag
No.
989
The bag contains two pockets at the ends, a pocket on the side and a shoulder strap. The bag has a large opening flap on top which makes packing easier. The PONSSE logo is on the side of the bag.
baCkbaCk
No.
900
Material: Polyester
236 237
PONSSE COllECtiON
VaCuum fLaSk
No.
968
A steel vacuum flask keeps your drinks hot or cold. Efficien-cy can be increased by sliding the flask into the accompa-nying thermo bag. Volume 0.75 l.
VaCuum fLaSk
No.
861
A steel vacuum flask keeps your food hot or cold. Volume 0.75 l.
kukSa
No.
901
Kuksa, a traditional Lappish drinking cup carved out of birch burl.A piece of reindeer bone in the handle, PONSSE logo on the side. For two fingers.
tuju
No.
902
Kuksa is a traditional Lappish drinking cup carved out of birch burl.PONSSE logo on the side. The package contains two ”Tuju” kuksas.
fLaShLight
No.
995
A small but efficient 9-LED light. Low power consumption because of LED technology.
umbrELLa
No.
915
An umbrella with a wooden handle and historical Ponsse images. PONSSE printing on one all-black section.
239238
PONSSE bEar
No.
906
Sweet PONSSE BEAR.Material: Polyester
PONSSE fOOtbaLL
No.
840
Material: Polyurethan
SiLENCEr
No.
Black 942
A silencer designed for children. Made of natural rubber meeting the requirements of the EN-1400 standard.
PONSSE-dOg
No.
841
The sweet PONSSE dog.Material: Polyester
traCkS fOr thE PONSSE SCaLE mOdEL
No.
9271
Now your PONSSE Elephant model can travel in soft terrain.
PONSSE SCaLE mOdEL
No.
927
A PONSSE Elephant model with logs. Every boy’s dream!
243242
PONSSE PLC
PONSSE SUBSIDIARY
PONSSE DEALER
North and South americaPONSSE LATIN AMERICA LTDA BRAZIL
PONSSE NORTH AMERICA, INC. USA
PONSSE URUGUAY S.A. URUGUAY
A.L.P.A. EQUIPMENT LTD. CANADA
CHADWICK-BAROSS, INC. USA
HYDROMEC INC. CANADA
READYQUIP SALES AND SERVICE LTD. CANADA
FOREST CENTER E.I.R.L. CHILE
Central and Southern EuropePONSSÉ S.A.S. FRANCE
PONSSE UK LTD. UNITED KINGDOM
AUTO SUECO (COIMBRA) LDA PORTUGAL
FOREST POWER KFT. HUNGARY
KRENEK FOREST SERVICE S.R.O CHECH REPUBLIC
PML POLAND POLAND
TOIMIL CARCIA S.L. SPAIN
WAHLERS FORSTTECHNIK GMBH GERMANY
FOREST POWER - SC. IF CONST S.R.L. ROMANIA
FLEXIM SPOL. S R.O. SLOVAKIA
243
Northern EuropePONSSE PLC FINLAND
EPEC OY FINLAND
PONSSE AB SWEDEN
PONSSE AS NORWAY
AN MASKINTEKNIK AB SWEDEN
KONEKESKO EESTI AS ESTONIA
SIA KONEKESKO LATVIJA LATVIA
UAB KONEKESKO LIETUVA LITHUANIA
Russia and AsiaPONSSE CHINA LTD. CHINA
OOO PONSSE RUSSIA
ODO UDArNIK BELARUS
OOO DOrMASHIMPOrT-VOSTOK RUSSIA
OOO LESPrOMSErVIS RUSSIA
OOO KOSTrOMA-SErVIS-PONSSE RUSSIA
OOO rEMTECHNICA RUSSIA
OOO PKF GIDrOSErVIS RUSSIA
OOO NOrD WEST-KOM rUSSIA
OOO ZEPPELIN rUSSLAND RUSSIA
OOO PArTS SErVIS RUSSIA
SHINGU SHOKO, LTD JAPAN
rANDALLS EQUIPMENT COMPANY AUSTRALIA
Dear reader,
You are reading the updated Ponsse Service 2015 catalogue.
We have expanded our product selection further. We have added new products to the catalogue and updated existing products. However, there are only a limited number of products offered by our ser-vice centres.
We hope that the catalogue is a useful tool for you for making purchases. We have also included products and tools that may not be found in the spare parts book delivered with your machine.
The catalogue is well worth having a look at regardless of the machine You are using. You may find products that You may not have known to be available from us – at our usual low prices. Please do not hesitate to contact us if You are not sure if You have the right product. Our parts specialists will certainly be able to help.
We have further developed our Service network to be able to effectively meet the needs of the expanding customer base and machine stock. Our Parts teams of experienced experts are at Your disposal.
We wish all our partners the best of success with future ventures!
Best regards,
Ponsse Global Service
PoNssE GlobAl sERvicE
www.ponsse.com
Copyright © 2014 Ponsse Plc. PONSSE is a registered trademark of Ponsse Plc and other product names are trademarks or trade names of Ponsse Plc.
Ser
vic
e c
ata
log
ue 2
01
5
A logger´s best friend
Service catalogue 2015
Ponsse PlcPonssentie 22FI-74200 VieremäFINLANDTel. +358 20 768 800Fax +358 20 768 8690
Ponsse North america, inc.4400 International LaneRhinelander, WI 54501USATel. +1 715 369 4833Fax +1 715 369 4838
Ponsse uK ltd.Unit 3, Broomhouses 1 Industrial EstateLockerbie,Dumfriesshire DG11 2RZUNITED KINGDOMTel. +44 1576 203 000Fax +44 1576 202 202