Comfort Applications

7

8

Comfort Applications

9

For decades, Emerson has driven advancement in the air

conditioning and heat pump industry, leading the field

with engineering products and systems that maximize

the comfort of office and living spaces – while minimizing

costs and inefficiencies.

Copeland Scroll™ compressors are designed to deliver

the highest performance in residential and commercial

applications. Thanks to the widest selection of scroll

compressors optimized for air conditioning and heating, it

has never been easier to match all desired applications with

the highest efficiency and reliability. The capacity of our

single scrolls ranges from 1.5 to 60hp and they can reach

an overall capacity of 180 hp per circuit when combined in

even and uneven tandems and trios. Whether your need is a

cooling optimized, heating optimized or reversible unit, you

will find the most advanced technology within our range.

One of the most important recent innovations for comfort

applications has been the introduction of Variable

Speed technology. It was first introduced with the ZHW

compressors (featuring Enhanced Vapor Injection), as a

solution for residential heat pump applications. Now we

also offer the XHV range for cost-competitive heating

systems. In addition to the ZHW and XHV ranges for

residential applications, a wide range of models for

reversible and low temperature commercial applications

are available, from 18 to 96 cm3: XPV and ZPV Variable

Speed scroll compressors allow system manufacturers

and building owners to achieve superior performance

when designing reversible chillers, heat pumps, precision

cooling systems or rooftops.

Emerson is introducing the next generation of 20 and

25hp ZP*KZE and 30 and 40 hp ZP*KPE compact scrolls for

R410A with advanced monitoring features and optimized

seasonal performance.

Comfort Applications

10

ZR Copeland Scroll compressors, for R407C and R134a, for comfort and process/precision cooling applications.

Applied in the air conditioning and comfort industry for water chillers, rooftops and close control unit applications, scroll compressors are now the most used compression technology replacing reciprocating and screw compressors due to its undeniable superiority. Several, fully Copeland™ qualified, multiple compressor assemblies (tandem and trio) are available to allow the use of Copeland Scroll compressors into large capacity systems (ex. up to 500kW air cooled chillers) able to deliver optimal comfort, low operating cost with higher seasonal efficiency (ESEER).

The range of products goes from the ZR18 (1.5hp) to the ZR380 (30hp)

ZR Scroll Compressor Line-up R407C

Features and Benefits

• Copeland Scroll axial and radial compliance for superior reliability and efficiency

• Wide scroll line-up for R407C and R134a• Low TEWI (Total Equivalent Warming Impact)• Low sound and vibration level• Low oil circulation rate• Copeland qualified tandem and trio configurations for

superior seasonal efficiency (ESEER)

Maximum Allowable Pressure (PS)

• ZR18 to ZR81: Low side PS 20 bar(g) / High Side PS 29.5 bar(g)

• ZR94 to ZR380: Low side PS 20 bar(g) / High Side PS 32 bar(g)

Conditions EN12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

ZR Scroll Compressor

ZR Copeland Scroll™ Compressor Range for R407C and R134a

Operating Envelope R407C

Con

dens

ing

Tem

pera

ture

°C

Evaporating Temperature °CR407C - 10K Superheat

20

25

35

45

55

60

65

-30 25-25 -15 -10 -5 5 15

70

-20 0 10 20

ZR 18-81

ZR 94-190

ZR 144

ZR 250-380

30

40

50

kW Cooling0 10 60

ZR (1Ph)

ZR (3Ph)

70 80 9020 30 40 50

kW Cooling0 20

Tandem

Trio

200 25022040 60 8010 30 210 23050 70 90 100 140120110 130 150 190170160 180 240

11

Operating Envelope R134aC

onde

nsin

g Te

mpe

ratu

re °C

Evaporating Temperature °C

15

20

30

40

50

55

60

-30 25-25 -15 -5 5 15

70

-20 -10 0 10 20

ZR94-380KCE R134a 10K ZR22-81KCE R134a 10K

25

35

45

Technical Overview

Conditions EN12900 : Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K* 1 Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Models

No

min

al

hp

R40

7C

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)

Length/Width/Height (mm)

Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

Locked Rotor Current (A)

Sound Pressure

@1 m - dB(A)

***1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZR18K5E 1.5 3.7 3.0 4.4 3/4 1/2 0.74 242/242/383 20 PFJ 10 35 54

ZR22K3E 2.0 4.5 2.9 5.3 3/4 1/2 1.00 242/242/363 22 PFJ TFD 11 4 47 24 54

ZR28K3E 2.5 5.9 2.9 6.8 3/4 1/2 1.00 242/242/363 25 PFJ TFD 15 5 61 32 54

ZR34K3E 2.8 7.0 3.0 8.0 3/4 1/2 1.10 242/242/386 26 PFJ TFD 17 6 76 40 57

ZR40K3E 3.5 8.2 3.0 9.4 3/4 1/2 1.10 242/242/400 27 PFJ TFD 23 7 100 v 46 57

ZR48K3E 4.0 10.1 3.1 11.4 7/8 1/2 1.36v 242/242/417 31 PFJ TFD 23 10 114 50 57

ZR61KCE 5.0 12.5 3.1 14.4 7/8 1/2 1.66 241/247/438 43 PFJ TFD 30 11 150 65 60

ZR61KSE 5.0 12.8 3.2 14.4 7/8 1/2 1.42 242/242/430 30 PFZ TFM 11 59 61

ZR72KCE 6.0 14.8 3.2 17.1 7/8 1/2 1.77 242/242/438 39 TFD 13 74 61

ZR81KCE 6.8 16.7 3.2 18.7 7/8 3/4 1.77 242/242/443 39 TFD 15 101 61

ZR94KCE 8.0 20.6 3.3 22.1 1 1/8 7/8 2.65 264/285/476 57 TFD 16 t95 63

ZR108KCE 9.0 23.0 3.4 24.9 1 3/8 7/8 3.38 264/285/533 60 TFD 17 111 63

ZR125KCE 10.0 27.0 3.4 29.1 1 3/8 7/8 3.38 264/285/533 61 TFD 19 118 63

ZR144KCE 12.0 30.9 3.4 33.2 1 3/8 7/8 3.38 264/285/533 61 TFD 22 118 64

ZR160KCE 13.0 33.4 3.2 36.4 1 3/8 7/8 3.38 264/285/552 65 TFD 28 140 67

ZR190KCE 15.0 39.3 3.2 43.3 1 3/8 7/8 3.38 264/285/552 66 TFD 34 174 69

ZR250KCE 20.0 52.2 3.2 56.6 1 5/8 1 3/8 4.70 432/376/717 140 TWD 41 225 72

ZR310KCE 25.0 65.0 3.2 71.4 1 5/8 1 3/8 6.80 448/392/715 160 TWD 52 272 74

ZR380KCE 30.0 81.7 3.4 87.4 1 5/8 1 3/8 6.30 447/427/715 177 TWD 62 310 76

75

12

Capacity Data

Conditions: Suction Superheat 10K / Subcooling 0K

Condensing Temperature +40°C

R407CCooling Capacity (kW)

R407CPower Input (kW)

Evaporating Temperature (°C) Evaporating Temperature (°C)

Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZR18K5E 1.8 2.3 2.8 3.5 4.2 5.1 6.1 ZR18K5E 1.0 1.0 1.0 1.0 1.0 1.0 1.0

ZR22K3E 2.1 2.7 3.4 4.2 5.2 6.3 7.5 ZR22K3E 1.2 1.2 1.2 1.2 1.2 1.2 1.1

ZR28K3E 2.7 3.5 4.4 5.5 6.7 8.1 9.6 ZR28K3E 1.6 1.6 1.6 1.5 1.5 1.5 1.5

ZR34K3E 3.2 4.1 5.2 6.5 7.9 9.6 11.5 ZR34K3E 1.8 1.8 1.8 1.8 1.8 1.8 1.7

ZR40K3E 3.8 4.9 6.1 7.6 9.4 11.3 13.5 ZR40K3E 2.2 2.2 2.2 2.1 2.1 2.1 2.0

ZR48K3E 4.8 6.1 7.6 9.4 11.5 13.8 16.6 ZR48K3E 2.6 2.6 2.6 2.6 2.6 2.5 2.5

ZR61KSE 6.5 8.1 9.9 11.9 14.4 17.2 20.6 ZR61KsE 3.0 3.0 3.1 3.2 3.2 3.1 2.9

ZR72KCE 7.0 9.0 11.3 13.9 16.9 20.3 24.2 ZR72KCE 3.6 3.7 3.7 3.7 3.7 3.7 3.8

ZR81KCE 7.8 10.1 12.7 15.6 19.1 23.0 27.7 ZR81KCE 4.1 4.1 4.1 4.1 4.2 4.2 4.3

ZR94KCE 9.8 12.6 15.8 19.3 23.3 27.9 33.1 ZR94KCE 4.9 5.0 5.0 5.0 5.0 4.9 4.9

ZR108KCE 11.3 14.2 17.6 21.5 26.2 31.5 37.6 ZR108KCE 5.4 5.4 5.5 5.5 5.5 5.6 5.7

ZR125KCE 13.1 16.6 20.5 25.2 30.5 36.7 43.7 ZR125KCE 6.3 6.3 6.4 6.4 6.4 6.5 6.6

ZR144KCE 14.5 18.7 23.4 28.9 35.0 42.0 50.1 ZR144KCE 7.1 7.1 7.2 7.2 7.3 7.3 7.4

ZR160KCE 14.9 19.5 24.9 31.3 38.7 47.3 57.1 ZR160KCE 8.0 8.1 8.2 8.2 8.3 8.4 8.5

ZR190KCE 18.5 23.8 29.8 36.7 44.7 53.8 64.2 ZR190KCE 9.7 9.7 9.8 9.8 9.9 10.1 10.4

ZR250KCE 25.7 32.2 39.9 48.9 59.3 71.3 85.0 ZR250KCE 12.5 12.6 12.7 12.9 13.0 13.0 13.0

ZR310KCE 31.2 39.7 49.7 61.4 75.0 90.7 108.5 ZR310KCE 15.6 15.7 15.9 16.1 16.3 16.6 17.0

ZR380KCE 38.1 49.1 61.7 76.2 93.1 113.0 136.5 ZR380KCE 18.6 18.8 19.0 19.2 19.4 19.8 20.3


R134a Cooling Capacity (kW) R134a Power Input (kW)


Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZR22K3E 1.4 1.8 2.3 2.9 3.6 4.4 5.3 ZR22K3E 0.9 0.9 0.9 0.9 0.9 0.8 0.8

ZR28K3E 1.8 2.3 3.0 3.8 4.7 5.7 6.9 ZR28K3E 1.1 1.2 1.1 1.1 1.1 1.1 1.1

ZR34K3E 2.2 2.9 3.6 4.5 5.5 6.7 8.1 ZR34K3E 1.4 1.4 1.4 1.3 1.3 1.3 1.3

ZR40K3E 2.5 3.3 4.2 5.2 6.4 7.8 9.3 ZR40K3E 1.6 1.5 1.5 1.5 1.5 1.5 1.5

ZR48K3E 3.1 4.0 5.1 6.3 7.8 9.5 11.5 ZR48K3E 1.8 1.8 1.8 1.8 1.8 1.8 1.8

ZR61KCE 4.0 5.2 6.5 8.1 9.9 12.1 14.6 ZR61KCE 2.1 2.1 2.2 2.2 2.2 2.2 2.3

ZR72KCE 4.8 6.2 7.8 9.7 11.9 14.5 17.4 ZR72KCE 2.6 2.6 2.6 2.6 2.6 2.6 2.7

ZR81KCE 5.5 7.0 8.8 10.8 13.2 16.0 19.2 ZR81KCE 2.8 2.9 2.9 2.9 2.9 3.0 3.0

ZR94KCE 5.3 7.5 10.5 13.0 15.9 19.2 23.0 ZR94KCE 3.4 3.4 3.4 3.4 3.4 3.4 3.5

ZR108KCE 7.3 9.3 11.7 14.3 17.5 21.3 25.7 ZR108KCE 3.7 3.8 3.8 3.8 3.8 3.9 3.9

ZR125KCE 8.3 10.7 13.5 16.7 20.5 24.9 30.1 ZR125KCE 4.3 4.4 4.4 4.4 4.4 4.5 4.5

ZR144KCE 10.4 13.3 16.5 20.0 23.7 27.8 32.4 ZR144KCE 4.7 4.9 4.9 5.0 5.0 5.2 5.5

ZR160KCE 10.1 13.3 16.9 21.0 25.7 31.2 37.5 ZR160KCE 5.5 5.5 5.5 5.6 5.7 5.8 5.9

ZR190KCE 12.3 16.0 20.2 25.0 30.7 37.2 44.7 ZR190KCE 6.8 6.9 6.9 7.0 7.0 7.1 7.3

ZR250KCE 16.1 20.5 25.6 31.8 39.0 47.4 57.2 ZR250KCE 8.6 8.7 8.9 9.0 9.1 9.2 9.4

ZR310KCE 20.0 25.6 32.1 39.7 48.6 59.0 71.1 ZR310KCE 10.6 10.8 10.9 10.0 11.2 11.5 11.7

ZR380KCE 25.5 32.2 40.1 49.4 60.3 73.0 87.8 ZR380KCE 12.6 12.9 13.1 13.4 13.6 14.0 14.4


13

ModelNominal

hpCooling Capacity R407C

(kW)Even

TandemUneven Tandem

Tandem ZRT - Tandem Uneven ZRU

ZRT 96 K3E 2 x 4 20 •

ZRT 122 KSE 2 x 5 25 •

ZRT 144 KCE 2 x 6 30 •

ZRT 162 KCE 2 x 6.5 33 •

ZRT 188 KCE 2 x 8 41 •

ZRT 216 KCE 2 x 9 46 •

ZRT 250 KCE 2 x 10 52 •

ZRT 288 KCE 2 x 12 59 •

ZRU 315 KCE* 10 + 15 66 •

ZRT 320 KCE 2 x 13 67 •

ZRU 350 KCE* 13 + 15 73 •

ZRT 380 KCE 2 x 15 78 •

ZRU 440 KCE* 15 + 20 92 •

ZRT 500 KCE* 2 x 20 104 •

ZRU 500 KCE* 15 + 25 104 •

ZRU 560 KCE* 20 + 25 117 •

ZRT 620 KCE* 2 x 25 130 •

ZRU 690 KCE* 25 + 30 147 •

ZRT 760 KCE* 2 x 30 163 •

Tandem Model Overview

Conditions EN 12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

* Tandem Assemblies by System Manufacturers. Emerson Can Provide Full Technical Support.

14

ZP Copeland Scroll™ Compressor Range for R410A

ZP Copeland Scroll compressors, for R410A, for comfort and process precision cooling applications. Emerson has been the pioneer in launching the first complete line-up of R410A commercial scroll compressors.

ZP Copeland Scroll compressors are perfectly suitable for air- cooled chiller systems up to 900kW (1100 kW if water-cooled)featuring high comfort and superior seasonal efficiency (ESEER).Whether used in stand-alone, tandem or trio configurations, the broad ZP Copeland Scroll line-up meets today’s market requirements with unmatched flexibility, efficiency and proven reliability.

ZP104, ZP122 and ZP143KCE compressors for light commercial systems have a reduced footprint and weight for more compact systems. Their high efficiency helps to reduce operating costs.

ZP Scroll Compressor Line-up

ZP Scroll Compressor

Operating Envelope R410AFeatures and Benefits

• Copeland qualified tandem and trio (now also uneven)

configurations for superior seasonal efficiency (ESEER and EN14825: SEER and SCOP)


• Extended 5K operating envelope suitable for heat pump applications

• Low TEWI (Total equivalent warming impact)• Wide scroll line-up for R410A• Low sound and vibration level• Low oil circulation rate


• ZP24 to ZP91: Low side PS 28 bar(g) / High side PS 43 bar(g)

• ZP104 to ZP725: Low side PS 29.5 bar(g) / High side PS 45 bar(g)

Con

dens

ing

Tem

pera

ture

°C

Evaporating Temperature °C10K Superheat

20

60

-25 20-15 -5 5 15

70

-20 -10 0 10

ZP 24-31 ZP 36-143 ZP 154-725

30

40

50


kW Cooling0 10 60 70 80 90 100 16011020 30 40 50

ZP (1Ph)

ZP (3Ph)

120 140

kW Cooling0 40

Tandem

Trio

200 4202208020 60 380 400100 140120 320 360340160 180 240 440 460280 300260 480

15

Technical Overview

ModelsN

om

inal

h

p

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)

Length/width/height (mm)

Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)


Sound Pressure

@1 m - dB(A)

***1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZP24K5E 1.9 5.1 2.8 3.9 3 / 4 1 / 2 0.74 242/242/387 22 PFJ TFD 13 5 60 28 55

ZP29K5E 2.2 6.1 2.9 4.8 3 / 4 1 / 2 0.74 242/242/387 23 PFJ TFD 16 6 67 38 55

ZP31K5E 3.0 6.5 2.8 5.0 3 / 4 1 / 2 0.74 242/242/388 23 PFJ TFD 17 6 67 38 55

ZP36K5E 2.6 7.9 3.0 6.0 7 / 8 1 / 2 1.25 242/242/418 30 PFJ TFD 22 7 98 46 57

ZP42K5E 3.4 9.0 2.9 6.9 7 / 8 1 / 2 1.25 242/242/418 31 PFJ TFD 26 8 128 43 57

ZP54K5E 4.6 11.6 3.0 8.9 7 / 8 1 / 2 1.24 242/242/418 34 PFJ TFD 31 10 115 51 59

ZP61K5E 5.0 13.3 3.0 10.0 7 / 8 1 / 2 1.24 246/246/443 35 TFD 12 64 60

ZP72KCE 6.0 15.3 3.0 11.7 7 / 8 1 / 2 1.77 246/246/443 40 TFD 15 75 64

ZP83KCE 6.5 17.7 3.1 13.4 7 / 8 1 / 2 1.77 246/246/443 40 TFD 15 101 61

ZP91KCE 7.5 19.3 3.1 14.7 7 / 8 3 / 4 1.77 246/248/446 41 TFD 16 101 61

ZP104KCE 9.0 22.7 3.2 16.8 1 1 / 8 7 / 8 2.51 264/284/476 48 TFD 18 128 63

ZP122KCE 10.0 26.5 3.2 19.5 1 1 / 8 7 / 8 2.51 293/258/559 49 TFD 22 139 63

ZP143KCE 12.0 31.6 3.2 23.1 1 3 / 8 7 / 8 2.75 297/262/559 49 TFD 25 145 64

ZP154KCE 13.0 33.5 3.2 24.8 1 3 / 8 7 / 8 3.38 329/298/552 65 TFD 31 140 65

ZP182KCE 15.0 39.6 3.2 29.1 1 3 / 8 7 / 8 3.38 264/284/552 66 TFD 34 174 66

ZP385KCE 30.0 82.4 3.2 60.8 1 5 / 8 1 3 / 8 6.30 448/392/715 178 TWD 65 310 74

ZP485KCE 40.0 105.0 3.2 77.3 1 5 / 8 1 3 / 8 6.30 391/447/746 190 TWD 82 408 78

ZP725KCE 60.0 160.0 3.2 115 2 1 / 8 1 3 / 8 6.30 459/483/863 250 FED 124 567 78

Conditions EN12900 : Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

* 1 Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field conditionPreliminary Data

16

Capacity Data


R410ACooling Capacity (kW)

R410APower Input (kW)


Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZP24K5E 2.2 3.0 3.9 4.9 5.9 7.1 ZP24K5E 1.5 1.5 1.4 1.4 1.4 1.3

ZP29K5E 2.9 3.9 4.9 6.0 7.3 8.6 ZP29K5E 1.8 1.8 1.7 1.7 1.7 1.6

ZP31K5E 3.2 4.1 5.2 6.3 7.6 9.1 ZP31K5E 1.9 1.9 1.9 1.8 1.8 1.8

ZP36K5E 4.1 5.1 6.3 7.7 9.2 11.0 ZP36K5E 2.2 2.1 2.1 2.1 2.1 2.1

ZP42K5E 4.4 5.7 7.1 8.7 10.5 12.5 ZP42K5E 2.4 2.4 2.4 2.4 2.3 2.3

ZP54K5E 6.0 7.5 9.3 11.3 13.5 16.0 ZP54K5E 3.1 3.1 3.0 3.0 2.9 2.9

ZP61K5E 6.9 8.6 10.6 12.9 15.5 18.4 21.4 ZP61K5E 3.5 3.5 3.4 3.4 3.4 3.4 3.4

ZP72KCE 8.2 10.1 12.3 14.8 17.7 20.9 ZP72KCE 4.0 4.0 4.0 4.0 4.1 4.1

ZP83KCE 9.4 11.6 14.2 17.1 20.4 24.2 ZP83KCE 4.5 4.5 4.5 4.6 4.6 4.7

ZP91KCE 10.2 12.6 15.4 18.6 22.2 26.3 31.0 ZP91KCE 4.9 4.9 4.9 5.0 5.0 5.0 5.3

ZP104KCE 12.0 14.9 18.1 21.9 26.1 31.0 36.5 ZP104KCE 5.7 5.7 5.7 5.7 5.8 5.8 5.9

ZP122KCE 14.1 17.4 21.2 25.5 30.4 36.1 42.4 ZP122KCE 6.6 6.6 6.7 6.7 6.7 6.8 6.9

ZP143KCE 15.9 20.3 25.2 30.5 36.1 41.9 47.8 ZP143KCE 7.5 7.7 7.8 7.9 8.1 8.4 8.8

ZP154KCE 18.2 22.3 27.1 32.6 38.9 46.1 54.3 ZP154KCE 8.1 8.2 8.2 8.3 8.3 8.5 8.8

ZP182KCE 21.4 26.3 32.0 38.4 45.6 53.9 63.3 ZP182KCE 9.5 9.7 9.9 10.0 10.1 10.1 10.0

ZP385KCE 43.7 53.9 65.8 79.5 95.2 113.0 133.5 ZP385KCE 20.3 20.4 20.5 20.7 20.9 21.3 21.7

ZP485KCE 57.5 70.0 84.7 101.6 121.0 143.0 168.0 ZP485KCE 24.9 25.3 25.8 26.3 27.0 27.8 28.8

ZP725KCE 88.0 107.0 129.0 154.0 182.0 215.0 252.0 ZP725KCE 39.0 39.6 40.0 40.0 40.7 41.3 41.1

Conditions: Suction Superheat 10K / Subcooling 0KPreliminary Data

17

Model Nominal

hpCooling Capacity

(kW)Even

TandemUneven Tandem

Tandem ZPT - Tandem Uneven ZPU

ZPT 72 K5E* 2 x 3 16 •

ZPT 84 K5E* 2 x 3.5 18 •

ZPT 108 K5E* 2 x 4 23 •

ZPT 122 K5E* 2 x 5 26 •

ZPT 144 KCE* 2 x 6 31 •

ZPT 166 KCE* 2 x 6.5 35 •

ZPT 182 KCE* 2 x 8 39 •

ZPT 208 KCE* 2 x 9 45 •

ZPT 244 KCE* 2 x 10 53 •

ZPT 286KCE 2 x 12 63 •

ZPT 308KCE* 2 x 13 67 •

ZPU 336 KCE* 13 + 15 73 •

ZPT 364 KCE* 2 x 15 79 •

ZPU 417 KCE* 15 + 20 90 •

ZPT 470 KCE* 2 x 20 101 •

ZPU 477 KCE* 15 + 25 103 •

ZPU 530 KCE* 20 + 25 114 •

ZPT 590 KCE* 2 x 25 127 •

ZPU 680 KCE* 25 + 30 146 •

ZPT 770 KCE* 2 x 30 165 •

ZPU 870 KCE* 30 + 40 187 •

ZPT 970 KCE* 2 x 40 209 •

ZPU 111 MCE* 30 + 60 240 •

ZPU 121 MCE* 40 + 60 262 •

ZPT 145 MCE* 60 + 60 317 •


Conditions EN 12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K* Tandem assemblies by system manufacturers. Emerson can provide full technical support.

System using ZP235 or ZP295 (20 or 25 hp) shall use the new ZP232KZE and ZP292KZE (refer to next chapter)

18

ZP CopelandTM Scroll Air Conditioning Compressor Range, Optimized for Seasonal Performance

ZP*KZE & ZP*KPE Compressor Line-up


The new ZP*KZE and ZP*KPE scroll compressors for large chillers feature advanced monitoring capabilities and improved part-load cooling efficiency, thanks to VVR technology. This will help OEMs meet the minimum seasonal performance level required by the Ecodesign Directive.

The CoreSense Communications module they are equipped with ensures enhanced reliability, by providing real time compressor data to the system controller to provide temperature protection.

They are designed for reversible chillers, rooftop or air handling units with a cooling capacity between 30 and 400 kW.

• High seasonal performance (SEER) 5% improved SEER versus previous generation• Flexibility & reduced complexity Wide range of even and uneven tandem and trio assemblies for a full system line-up with a reduced number of compressor models in stock.• Enhanced reliability through electronics The CoreSense Communications module provides realtime compressor data via RS485 Modbus that is used by the system controller to provide temperature protection. This ensures greater reliability for demanding applications.

ZP*KZE Scroll Compressor

kW Cooling

Single

Tandem

Trio

0 50 300 350100 150 200 250

Multiple Copeland Scroll Nominal Cooling kW @(5/50) EN12900 - 1 Circuit

Operating Envelope R410A

-35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 2515

20

25

30

35

40

45

50

55

60

65

70

Con

dens

ingT

empe

ratu

re °C


19

Technical Overview

Conditions EN12900 : Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition Preliminary Data

ModelsN

om

inal

h

p

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)


Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)


Sound Pressure

@1 m - dB(A)

***1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZP137KPE 12.0 29.0 3.2 22.1 1 3/8 7/8 3.3 264/285/552 65 TFD 25.0 118 65

ZP154KPE 13.0 33.0 3.1 24.9 1 3/8 7/8 3.3 264/285/552 65 TFD 31.0 140 65

ZP182KPE 15.0 39.0 3.1 29.1 1 3/8 7/8 3.3 326/295/552 66 TFD 34.0 174 66

ZP232KZE 20.0 50.6 3.3 36.6 1 5/8 1 1/8 4.4 344/292/661 90 TED 38.8 241 72

ZP292KZE 25.0 63.4 3.3 45.7 1 5/8 1 1/8 4.4 344/292/661 90 TED 48.6 287 73

ZP385KPE 30.0 82.9 3.2 60.8 1 5/8 1 3/8 6.3 447/427/724 177 TWD 65.4 310 74

ZP485KPE 40.0 105.0 3.2 77.3 1 5/8 1 3/8 6.3 368/345/756 190 TWD 82.6 408 78

Capacity Data



R410A Cooling Capacity (kW) R410A Power Input (kW)


Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZP137KPE 15.4 19.2 23.4 28.1 33.6 39.9 47.1 ZP137KPE 7.4 7.4 7.4 7.4 7.4 7.4 7.5

ZP154KPE 17.6 21.8 26.7 32.2 38.5 45.6 53.6 ZP154KPE 8.7 8.6 8.6 8.4 8.4 8.4 8.5ZP182KPE 21.0 26.1 31.7 38.1 45.3 53.4 62.6 ZP182KPE 10.2 10.1 10.1 10.0 10.0 9.9 9.8ZP232KZE 27.2 33.5 40.6 48.8 58.1 68.6 89.5 ZP232KZE 12.1 12.2 12.2 12.3 12.3 12.3 12.4ZP292KZE 34.6 42.4 51.3 61.3 72.5 85.0 98.8 ZP292KZE 15.6 15.6 15.7 15.7 15.7 15.7 15.7ZP385KPE 45.5 55.6 67.3 80.8 96.3 113.8 133.7 ZP385KPE 20.5 20.5 20.5 20.6 20.8 21.1 21.5ZP485KPE 58.5 71.1 85.6 102.3 121.3 142.9 167.4 ZP485KPE 25.8 25.8 25.9 26.1 26.4 26.7 27.2

ModelNominal

hp

Cooling Capacity

(kW)

Even Tandem

Uneven Tandem

Tandem ZPT - Tandem Uneven ZPU

ZPT 274 K 2 x 12 58 •

ZPT 308 K 2 x 13 67 •

ZPU 336 K 13 + 15 72 •

ZPT 364 K 2 x 15 77 •

ZPU 414 K 15 + 20 89 •

ZPT 464 K 2 x 20 101 •

ZPU 474 K 15 + 25 102 •

ZPU 524 K 20 + 25 114 •

ZPT 584 K 2 x 25 125 •

ZPU 677 K 25 + 30 146 •

ZPU 717 K 20 +40 155 •

ZPT 770 K 2 x 30 165 •

ZPU 870 K 30 + 40 187 •

ZPT 970 K 2 x 40 209 •

Conditions: Suction Superheat 10K / Subcooling 0K Preliminary Data

Conditions EN 12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K * Tandem assemblies by system manufacturers. Emerson can provide full technical support.

20

Stepless capacity modulation in air conditioning applications: flexible solution for R407C and R410A.

In many cooling and heating systems, the load and the operating conditions vary over a wide range thus requiring the use of capacity modulation. Digital Scroll assures stepless modulation down to 10% of the nominal capacity, enabling precise temperature control, superior comfort and energy saving.

Digital Scroll compressors are the preferred choice for process cooling, refrigeration racks, refrigeration units, VRF, rooftop and air handling unit systems.

ZPD & ZRD Digital Scroll Compressor Line-up R410A

ZPD & ZRD Digital Scroll Compressor Line-up R407C

kW Cooling5 10 35

ZPD (3Ph)

40 45 50 60 80


• Digital ZRD42 to ZRD81: Low Side PS 20 bar(g) / High Side PS 29.5 bar(g)

• Digital ZRD94 to ZRD125: Low Side PS 20 bar(g) / High Side PS 32 bar(g)

• Digital ZPD34 to ZPD91: Low Side PS 28 bar(g) / High Side PS 43 bar(g)

• Digital ZPD103 to ZPD182: Low Side PS 29.5 bar(g) / High Side PS 45 bar(g)

7015 20 25 30

kW Cooling5 15

ZRD (3Ph)

25 3510 20 30


• Wide modulation range from 10% to 100% for immediate load adjustment, close temperature comfort, optimal comfort

• No complex electronics, a quasi-drop-in solution for fast time to market, no EMI/EMC problems, easy installation and maintenance

• No impact on system mechanical balance: no vibration and resonance phenomenon, no frame / piping redesign necessary

Tandem

Tandem

55 65 75


ZPD & ZRD CopelandScroll Digital Compressor

ZPD & ZRD Copeland Scroll Digital™ Compressor Ranges for R410A and R407C

21

Operating Envelope R410A/R407CC

onde

nsin

g Te

mpe

ratu

re °C

Evaporating Temperature °CR410A - 10K Superheat

20

25

35

45

55

60

65

-30 25-25 -15 -5 5 15

70

-20 -10 0 10 20

ZPD 34-91 ZPD 104-182

30

40

50

Con

dens

ing

Tem

pera

ture

°C

Evaporating Temperature °CR407C - 10K Superheat

ZRD 42-81 ZRD 94-125

Technical Overview

Models

No

min

al

hp

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)


Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

LockedRotor

Current (A)

Sound Presure @1 m - dB(A)

**3 Ph* 3 Ph* 3 Ph*

ZPD34KSE 3.0 7.3 2.8 5.7 7/8 1/2 1.24 243/243/448 31 TFM 12 64 66

ZPD42KSE 3.5 9.1 3.0 6.9 7/8 1/2 1.24 243/243/464 31 TFM 8 52 66

ZPD54KSE 4.5 11.5 3.0 8.9 7/8 1/2 1.24 236/236/479 35 TFM 10 62 67

ZPD61KCE 5.0 13.2 2.9 10.1 7/8 1/2 1.89 241/246/484 41 TFD 12 64 63

ZPD72KCE 5.0 15.2 2.9 11.6 7/8 1/2 1.89 241/246/484 40 TFD 15 75 67

ZPD83KCE 6.0 17.7 3.0 13.4 7/8 1/2 1.77 246/253/481 40 TFD 16 101 64

ZPD91KCE 7.5 19.2 3.1 14.7 7/8 3/4 1.80 246/253/481 40 TFD 16 101 69

ZPD104KCE 9.0 22.7 3.1 16.7 1 1/8 7/8 3.25 270/262/605 61 TFD 18 128 63

ZPD122KCE 10.0 26.3 3.1 19.7 1 1/8 7/8 3.25 270/262/605 62 TFD 21 139 63

ZPD137KCE 12.0 29.5 3.1 22.1 1 3/8 7/8 3.25 293/285/533 62 TFD 25 118 63

ZPD154KCE 13.0 33.1 3.1 24.8 1 3/8 7/8 3.25 314/285/552 65 TFD 27 140 66

ZPD182KCE 15.0 39.0 3.1 29.0 1 3/8 7/8 3.25 314/285/552 67 TFD 34 173 68

Models

No

min

al

hp

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)


Net weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

LockedRotor

Current (A)

Sound Presure @1 m - dB(A)

**3 Ph* 3 Ph* 3 Ph*

ZRD42KCE 3.5 8.9 2.9 9.9 3/4 1/2 1.24 241/241/462 31 TFD 7 46 60

ZRD48KCE 4.0 10.5 3.0 11.4 7/8 1/2 1.36 241/241/465 32 TFD 10 48 64

ZRD61KCE 5.0 12.5 3.0 14.3 7/8 1/2 1.89 241/246/481 38 TFD 9.6 64 65

ZRD72KCE 6.0 14.3 2.9 17.0 7/8 3/4 1.89 241/246/481 40 TFD 13 74 63

ZRD81KCE 6.0 17.0 3.1 18.7 7/8 3/4 1.89 241/246/481 41 TFD 15 100 67

ZRD94KCE 7.5 21.0 3.3 22.1 1 1/8 7/8 2.51 293/285/476 58 TFD 16 95 64

ZRD125KCE 10.0 27.7 3.3 28.8 1 3/8 7/8 3.25 293/285/533 61 TFD 20 118 64

Conditions EN12900 R410A: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

* 3 Ph: 380-420V/ 50Hz** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Conditions EN12900 R410A: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

* 3 Ph: 380-420V/50Hz **@1m: sound pressure level at 1m distance from the compressor, free field condition

-30 25-25 -15 -5 5 15-20 -10 0 10 20

20

25

35

45

55

60

65

70

30

40

50

22

Capacity Data





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZPD34KSE 3.9 5.0 6.2 7.6 9.2 11.0 ZPD34KSE 2.1 2.1 2.1 2.0 2.0 2.0

ZPD42KSE 4.8 5.9 7.3 8.8 10.6 12.6 ZPD42KSE 2.3 2.3 2.4 2.4 2.4 2.3

ZPD54KSE 6.5 7.9 9.5 11.4 13.5 16.0 ZPD54KSE 3.1 3.1 3.1 3.0 3.0 3.0

ZPD61KCE 6.9 8.6 10.5 12.7 15.3 18.2 ZPD61KCE 3.3 3.4 3.5 3.5 3.6 3.6

ZPD72KCE 8.2 10.1 12.3 14.8 17.6 20.9 ZPD72KCE 3.9 4.0 4.1 4.1 4.2 4.2

ZPD83KCE 9.7 11.9 14.4 17.2 20.5 24.1 ZPD83KCE 4.5 4.6 4.7 4.7 4.8 4.9

ZPD91KCE 10.1 12.6 15.3 18.5 22.1 26.2 30.9 ZPD91KCE 4.9 5.0 5.0 5.0 5.1 5.0 5.0

ZPD104KCE 12.3 15.1 18.3 21.9 26.1 30.8 36.2 ZPD104KCE 5.6 5.7 5.7 5.9 6.0 6.1 6.2

ZPD122KCE 14.2 17.5 21.2 25.4 30.3 35.8 42.0 ZPD122KCE 6.4 6.5 6.6 6.7 6.8 6.9 7.0

ZPD137KCE 15.5 19.4 23.7 28.7 34.2 40.3 47.2 ZPD137KCE 7.5 7.5 7.5 7.4 7.4 7.5 7.6

ZPD154KCE 17.8 22.0 26.6 31.9 38.0 45.0 53.0 ZPD154KCE 8.2 8.3 8.4 8.5 8.6 8.7 8.9

ZPD182KCE 22.3 26.8 32.0 37.9 44.6 52.5 61.6 ZPD182KCE 9.8 9.9 10.0 10.1 10.2 10.4 10.5





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZRD42KCE 4.3 5.4 6.7 8.3 10.1 12.2 14.6 ZRD42KCE 2.0 2.1 2.1 2.2 2.2 2.3 2.3

ZRD48KCE 4.9 6.4 8.0 10.0 12.3 15.0 18.1 ZRD48KCE 2.5 2.6 2.6 2.7 2.7 2.8 2.9

ZRD61KCE 6.1 7.7 9.5 11.7 14.2 17.3 21.0 ZRD61KCE 3.0 3.1 3.2 3.4 3.4 3.4 3.3

ZRD72KCE 3.5 6.0 8.9 12.3 16.2 20.6 25.6 ZRD72KCE 3.5 3.6 3.7 3.8 4.0 4.1 4.3

ZRD81KCE 8.0 10.2 12.8 15.8 19.2 23.2 27.7 ZRD81KCE 4.3 4.4 4.4 4.5 4.6 4.7 4.8

ZRD94KCE 10.0 12.7 16.0 19.8 24.1 28.9 34.5 ZRD94KCE 5.0 5.1 5.1 5.1 5.1 5.2 5.3

ZRD125KCE 13.2 16.9 21.3 26.3 31.7 37.6 43.7 ZRD125KCE 6.5 6.6 6.6 6.7 6.8 6.9 7.1



23

24

XPV & ZPV Copeland Scroll™ Variable Speed Compressor Ranges for R410A With Inverter Drive

Copeland Scroll™ XPV and ZPV Variable Speed compressors are designed to deliver maximum cooling and heating efficiency when you need it most. Equipped with the latest variable speed technology, they allow system manufacturers and building owners to achieve superior performance when designing reversible chillers, heat pumps, precision cooling systems or rooftops.

In addition to Copeland market-proven robustness, the new XPV and ZPV ranges with their qualified inverter drive meet and exceed the level of reliability expected for these applications.

ZPV Operating Envelope R410A

Maximum Allowable Pressure (PS)• XPV018-046

Low Side PS 29.5 bar(g) / High Side PS 45 bar(g)• ZPV066 - 096

Low Side PS 29.5 bar(g) / High Side PS 45 bar(g)

Copeland Scroll™ ZPV066

variable speed compressor and

drive

-35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 30

5

20

25

30

35

40

45

50

55

60

65

70


Con

dens

ing

Tem

pera

ture

°C

15

10

25

XPV Operating Envelope R410A


Con

dens

ing

Tem

pera

ture

°C

Features and Benefits• Highest part load efficiency in its class enabling significant

energy savings and standards compliance• Wide speed range for enhanced part load efficiency and

dehumidification: 900 -7,200 RPM (15-120Hz)• Capability to be tandemized with fixed speed compressors

for maximum flexibility in system design• Both compressor and drive are Copeland™ approved for

reduced design time, cost and speed to market• BPM motor technology for highest efficiency• Sound reduction technology for reversible chiller transition

and defrost

XPV and ZPV Variable Speed Scroll Compressor Line-up

0 10

25

20 90 100

1250 50

30

75

40

100

50kW cooling capacity

kW cooling capacity

60 70 80

ZPV096

ZPV096 Tandems

ZPV066

ZPV066 Tandems

XPV025

XPV030

XPV038

XPV046

5

20

25

30

35

40

45

50

55

60

65

70

15

10

-35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 3025

XPV018

25

Technical Overview

Capacity Data

Compressor

R410A

Cooling Capacity (kW)

EER

*

Dis

pla

cem

ent

(cm

3 )

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)


Net

wei

gh

t (k

g)

Sou

nd

Pre

ssu

re

@1

m -

dB

(A)*

*

Min Max

XPV0182E 2.0 10.4 3.1 18.0 3/4 1/2 0.7 194/216/335 16 n.a.

XPV0252E 2.7 14.5 3.1 25.0 3/4 1/2 0.7 194/216/335 16 n.a.

XPV0302E 3.3 17.4 3.1 30.0 3/4 1/2 0.7 194/216/335 18 n.a.

XPV0382E 4.3 22.5 3.2 38.0 3/4 1/2 1.2 194/216/335 21 n.a.

XPV0462E 6.4 24.0 3.2 46.0 3/4 1/2 1.2 219/198/388 22 n.a.

ZPV0662E 8.3 39.0 3.0 63.0 1 1/8 7/8 2.5 273/262/559 40 73

ZPV0962E 12.9 53.3 3.1 96.0 1 1/8 7/8 2.5 273/262/559 44 75

Conditions EN12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K*@ Nominal speed (90hz)** @ 1m: sound pressure level at 1m distance from the compressor, free field condition Preliminary Data





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 +5 +10 +15

XPV0182EMax 5.8 7.0 8.4 10.1 12.0 14.1 16.5

XPV0182EMax 3.6 3.7 3.7 3.7 3.7

Min 1.5 1.6 1.7 1.7 2.0 2.4 2.9 Min 1.0 1.0 0.8 0.8 0.8

XPV0252EMax 7.2 8.8 10.8 13.2 15.8 18.8 22.2

XPV0252EMax 4.8 4.9 5.2 5.2 5.2

Min 2.2 2.4 2.4 2.4 2.9 3.4 4.1 Min 1.4 1.4 1.1 1.1 1.0

XPV0302EMax 8.9 10.7 12.9 15.6 18.8 22.5 26.7

XPV0302EMax 5.5 5.6 5.9 6.0 6.0

Min 2.2 2.5 1.5 1.9 2.3 2.7 3.7 Min 1.8 1.6 1.0 1.0 1.0

XPV0382EMax 11.3 13.6 16.4 19.8 23.8 28.5 33.8

XPV0382EMax 7.0 7.1 7.5 7.5 7.6

Min 2.8 3.2 1.9 2.4 2.9 3.4 4.6 Min 2.2 2.0 1.2 1.2 1.3

XPV0462EMax 13.6 16.4 19.8 23.9 28.8 34.4 40.8

XPV0462EMax 8.1 8.3 8.7 8.7 8.7

Min 3.6 4.5 2.2 2.8 3.3 4.0 5.1 Min 2.7 2.6 1.4 1.4 1.4

ZPV0662EMax 19.1 23.3 28.2 34.0 40.6 48.2 56.8

ZPV0662EMax 13.2 13.5 14.3 14.5 14.7

Min 6.2 4.9 6.0 7.1 8.3 9.8 11.5 Min 4.2 3.0 2.9 2.8 2.8

ZPV0962EMax 28.0 34.3 41.7 50.4 60.4 71.8 84.6

ZPV0962EMax 18.2 18.7 20.0 20.4 20.8

Min 9.1 7.5 9.0 10.8 12.8 15.2 18.0 Min 5.7 4.1 4.1 4.1 4.0

Condition: Suction Superheat 5K, Subcooling 4KPreliminary Data

Inverter Drive

ModelMatched

Compressor**

Capacity (kW)

Amps(A)

Cooling

Frequency (Hz) Net

Weight (kg)

1ph230V

3Ph400V

3Ph230V

3Ph575V

Comm.

Depth/Width/Height (mm)*Nominal Nominal Min Max

ED3015A XPV018 3.8 15

Horizontal / Flatplate

15 120 3.6 √ 205/240/143.5

ED3020A XPV025 5.0 20 15 120 √

Modbus RTU and Analog

board for 0-10V

180.5/205/255

ED3018BXPV025 /XPV030

5.0 18 15 120 √ 180.5/205/255

ED3022BXPV038/XPV046

8.0 22Fan / Horizontal /

Vertical / Flatplate15 120 √ 154/233/316

EVC1150 ZPV066 15.0

Fan Cooled

17 120 7.4 √ √ √ 202/143/391

EVC1185 ZPV096 18.5 20 120 14.0 √ √ √ 227/210/391

Conditions: Suction Superheat 5K, Subcooling 4K*Standard voltage air-cooled version including fins** Matching with XPV Ongoing

26

ZH Copeland Scroll™ Fixed Speed Compressor Range for R410A and R407C

ZH Copeland Scroll Compressor Range

The ZH compressor range is optimized for reversible and heat pump applications. In addition to the existing R407C range, a complete new range optimized for R410A has been developed. Both ranges are based on three platform sizes and cover a capacity of 4kW to 38kW.

ZH heating compressors have been optimized for reversible heating systems, they deliver higher capacity and efficiency at low evaporating (heat source) temperatures and are therefore better adapted to heating requirements than standard air conditioning compressors. Due to their larger operating map they also require less additional heating (electrical or gas) to cover the full heating demand on the coldest days and therefore further improve the system seasonal efficiency.

ZH Scroll Compressors With Enhanced Vapor Injection

ZH heating compressors with Enhanced Vapor Injection have been further optimized to ensure best-in-class performances in dedicated heating applications. This technology allows replacement of traditional boilers in new building and retrofit applications, without the need of substituting existing heating elements in the building.

ZH Copeland Scroll heating compressors with Enhanced Vapor Injection have an additional port to inject vapor within the compression process. This improves system performances by increasing the heating capacity for a given compressor displacement. Additional benefits are the reduction of the gas

Enhanced Vapor Injection: System Design Enhanced Vapor Injection: Enthalpy Diagram

P

h

m + i

i

m

Condenser

Solenoid Valve

Enhanced vapor injection

Scroll

Evaporator

EV

m

i

i

m + i

Eco

ZH Scroll Compressor

ZH Nomenclature Guidelines

ZH**K4EQualified for R407C/R134a without enhanced vapor injection - ** capacity in Btu/h

ZH**KVEQualified for R407C onlyenhanced vapor injection – ** capacity in kW

discharge temperature and the extension of the operating envelope which enable the production of high temperature water at all working conditions.

ZHI heating compressors reach the same high standards of durability and reliability as other Copeland Scroll compressors. This includes the ability to handle relatively large amounts of liquid, which is known to damage or cause compressor failures. Fewer moving parts, robust running gear and low vibration due to balanced compression mechanism make the ZH range of Copeland Scroll compressors the most reliable solution available in the heat pump market.

ZH**K1PQualified for R410A onlywithout enhanced vapor injection – ** capacity in kW

ZHI**K1PQualified for R410A onlyenhanced vapor injection – ** capacity in kW

27

Features and Benefits• Copeland Scroll axial and radial compliance for high reliability• High efficiency and increased heating capacity• High water temperature for all applications• Low sound and low vibration level• Tandem combination for superior seasonal efficiency• Enhanced Vapor Injection technology for best seasonal efficiency

ZH*K4E / ZH*KVE Scroll Compressor Line-up R407C

Operating Envelope R410A Heating

Refer to Emerson’s select selection software for individual model operating envelopes and other refrigerants.

ZH*P / ZHI*P Scroll Compressor Line-up R410A

Operating Envelope R407C Heating

Maximum Allowable Pressure (PS)• ZH(I)04K1P to ZH(I)23K1P:

Low Side PS 28 bar(g) / High Side PS 45 bar(g)• ZHI27K1P to ZHI46K1P:

Low Side PS 29.5 bar(g) / High Side PS 53 bar(g)• ZH12K4E to ZH45K4E:

Low Side PS 20 bar(g) / High Side PS 32 bar(g)• ZH56K4E to ZH11M4E:

Low Side PS 22.6 bar(g) / High Side PS 32 bar(g)• ZH09KVE to ZH18KVE:

Low Side PS 20 bar(g) / High Side PS 32 bar(g)• ZH24KVE to ZH48KVE:


kW heating

Three phase

Single phase

0 5 10 15 45 5020 25 30 35 40

ZH*KVE with Enh. vapor Inj.ZH*K4E without Enh. vapor Inj.

kW heating

Three phase

Single phase

0 5 10 15 45 5020 25 30 35 40

ZHI*P with Enh. vapor Inj.ZH*P without Enh. vapor Inj.

Conditions: Evaporating -7°C, Condensing 50°C, 4K Subcooling, 5K Superheat

Conditions: Evaporating -7°C, Condensing 50°C, 4K Subcooling, 5K Superheat

-35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 3015

20

25

30

35

40

45

50

55

60

65

70

Con

dens

ingT

empe

ratu

re °C


ZH*P without Enh. Vapor Inj.

ZH*P 2000 Hours Max.

ZHI*P with Enh. Vapor Inj.

ZHI*P 2000 Hours Max.

Wet Injection

Con

dens

ing

Tem

pera

ture

°C


ZH*P without Enh. vapor Inj.

ZH*P 2000 hours max.

ZHI*P with Enh. vapor Inj.

ZHI*P 2000 hours max.

Wet injection

-35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30

15

20

25

30

35

40

45

50

55

60

65

70

28

R410AN

om

inal

h

p

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e(i

nch

)

Oil

Qu

anti

ty

(l)


Net Weight

(kg)

Motor Version/ Code

Maximum Operating

Current (A)


Sound Pressure

@1 m - dB(A)

***1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZH04 K1P 1.8 4.2 2.8 3.4 3/4 1/2 0.7 229/198/388 22 PFZ TFM 9 5 50 28 62

ZH05 K1P 2.0 5.0 2.8 4.0 3/4 1/2 0.7 229/198/388 22 PFZ TFM 13 5 60 28 62

ZH06 K1P 2.7 6.6 2.9 5.1 7/8 1/2 1.2 242/242/418 31 PFZ TFM 17 6 83 44 62

ZH09 K1P 3.5 9.0 3.1 6.9 7/8 1/2 1.2 242/242/418 33 PFZ TFM 23 7 108 52 62

ZH12 K1P 4.5 11.4 3.0 8.9 7/8 1/2 1.2 242/242/418 35 PFZ TFM 28 10 130 62 65

ZH15 K1P 5.0 15.1 3.1 11.7 7/8 1/2 1.9 245/249/442 39 TFM 13 75 67

ZH19 K1P 6.5 18.7 3.2 14.8 7/8 3/4 1.9 239/244/443 39 TFM 17 67

ZHI05 K1P 1.9 5.2 3.0 3.4 3/4 1/2 0.7 229/198/388 22 PFZ TFM 14 4 60 28 63

ZHI08 K1P 2.8 8.2 3.1 5.1 7/8 1/2 1.2 242/242/418 31 PFZ TFM 19 6 108 43 63

ZHI11 K1P 3.6 10.8 3.2 6.9 7/8 1/2 1.2 242/242/418 31 PFZ TFM 25 9 130 52 65

ZHI14 K1P 4.6 13.9 3.3 8.9 7/8 1/2 1.2 242/242/418 34 TFM 11 70 65

ZHI18 K1P 5.0 17.9 3.4 11.7 7/8 1/2 1.9 249/245/443 41 TFM 15 67

ZHI23 K1P 6.5 22.8 3.4 14.8 7/8 3/4 1.9 239/244/443 41 TFM 19 67

ZHI27 K1P 9.0 27.0 3.3 16.8 1 3/8 7/8 3.3 280/280/533 63 TFD 21.0 118 77

ZHI32 K1P 10.0 31.7 3.2 19.8 1 3/8 7/8 3.3 280/280/533 63 TFD 26.0 140 75

ZHI35 K1P 12.0 35.6 3.2 22.1 1 3/8 7/8 3.3 280/284/568 63 TFD 32.5 174 76

ZHI40 K1P 13.0 39.7 3.3 24.9 1 3/8 7/8 3.3 284/280/568 64 TFD 33.0 174 76

ZHI46 K1P 15.0 46.6 3.3 29.1 1 3/8 7/8 3.4 284/280/568 64 TWD 37.4 168 78

Technical Overview

Conditions: Evaporating -7°C, Condensing 50°C, Superheat 5K, Subcooling 4K* 1 Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

R407C

No

min

al

hp

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e(i

nch

)

Oil

Qu

anti

ty

(l)


Net Weight

(kg)

Motor Version/ Code

Maximum Operating

Current (A)


Sound Pressure

@1 m - dB(A)

***1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZH12K4E 1.7 3.7 3.0 4.7 3/4 1/2 0.7 229/198/388 21 PFZ 10 44 53

ZH15K4E 2.0 4.6 3 5.8 3/4 1/2 1.3 243/242/364 23 PFJ TFD 11.6 4.3 61 26 60

ZH21K4E 3.0 6.5 3.1 8.0 3/4 1/2 1.5 243/242/387 27 PFJ TFD 16 5 76 32 59

ZH26K4E 3.5 8.2 3.1 10.0 3/4 1/2 3.1 243/242/400 28 PFJ TFD 20 7 97 46 63

ZH30K4E 4.0 9.5 3.1 11.7 7/8 1/2 1.9 247/241/438 38 PFJ TFD 25 8 108 52 62

ZH38K4E 5.0 11.7 3.2 14.4 7/8 1/2 1.9 247/241/438 38 PFZ TFD 31 10 150 64 63

ZH45K4E 6.0 14.0 3.2 17.1 7/8 1/2 1.9 250/246/438 36 TFD 12 74 64

ZH56K4E 7.5 17.4 3.1 20.9 1 3/8 7/8 4.0 357/321/497 93 TWD 17 99 69

ZH75K4E 10.0 24.2 3.2 28.8 1 3/8 7/8 4.0 357/321/497 93 TWD 21 127 70

ZH92K4E 13.0 30.7 3.3 35.6 1 3/8 7/8 4.1 356/320/505 95 TWD 25 167 72

ZH11M4E 15.0 37.0 3.3 42.8 1 5/8 7/8 4.1 357/321/579 112 TWD 32 198 72

ZH06KVE 2.5 6.2 3.3 5.8 3/4 1/2 1.3 243/243/364 27.5 TFM 4.4 26 62

ZH09KVE 3.0 8.2 3.3 8.0 3/4 1/2 1.5 243/243/386 30 PFZ TFD 21 7 97 40 62

ZH13KVE 4.0 11.8 3.4 11.7 7/8 1/2 1.9 244/241/438 38 PFZ TFD 30 10 160 64 65

ZH18KVE 6.0 16.7 3.4 17.1 7/8 1/2 1.9 244/241/438 41 TFD 14 101 67

ZH24KVE 7.5 21.3 3.3 20.9 1 3/8 7/8 4.0 368/321/525 93 TWD 18 99 73

ZH33KVE 10.0 29.5 3.4 29.0 1 3/8 7/8 4.0 368/321/525 93 TWD 24 127 73

ZH40KVE 13.0 37.0 3.4 35.5 1 3/8 7/8 4.1 368/321/532 103 TWD 30 167 73

ZH48KVE 15.0 44.7 3.4 42.8 1 5/8 7/8 4.1 368/323/579 112 TWD 36 198 76

Conditions: Evaporating -7°C, Condensing 50°C, Superheat 5K, Subcooling 4K

* 1 Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

29


R410AHeating Capacity (kW)



Model -30 -15 -10 -5 0 +5 +15 Model -30 -15 -10 -5 0 +5 +15

ZH04 K1P n.a. 3.3 3.9 4.5 5.2 6.0 7.6 ZH04 K1P n.a. 1.4 1.5 1.5 1.5 1.5 1.5

ZH09 K1P n.a. 7.1 8.2 9.5 10.9 12.5 16.4 ZH09 K1P n.a. 2.8 2.9 3.0 3.0 3.0 3.0

ZH12 K1P n.a. 9.2 10.5 12.1 13.9 15.9 21.0 ZH12 K1P n.a. 3.7 3.7 3.8 3.8 3.8 3.8

ZH15 K1P n.a. 12.0 13.8 15.9 18.4 21.1 27.7 ZH15 K1P n.a. 4.7 4.9 5.0 5.1 5.2 5.2

ZH19 K1P n.a. 15.2 17.5 20.2 23.2 26.7 35.1 ZH19 K1P n.a. 6.0 6.2 6.3 6.4 6.5 6.5

Models With Enhanced Vapor Injection

Model -30 -15 -10 -5 0 +5 +15 Model -30 -15 -10 -5 0 +5 +15

ZHI05 K1P 2.6 4.2 4.8 5.4 6.1 6.9 8.6 ZHI05 K1P 1.7 1.7 1.7 1.8 1.8 1.8 1.7

ZHI08 K1P 5.0 6.7 7.6 8.4 9.4 10.5 13.1 ZHI08 K1P 2.5 2.6 2.6 2.6 2.6 2.6 2.4

ZHI11 K1P 6.4 9.0 10.1 11.3 12.6 14.0 17.2 ZHI11 K1P 3.2 3.3 3.3 3.3 3.3 3.3 3.1

ZHI14 K1P 8.5 11.6 13.0 14.5 16.2 18.1 22.3 ZHI14 K1P 3.9 4.1 4.2 4.2 4.2 4.2 4.0

ZHI18 K1P 10.8 14.9 16.7 18.7 20.9 23.2 28.7 ZHI18 K1P 5.1 5.3 5.4 5.4 5.4 5.3 5.2

ZHI23 K1P 13.8 19.0 21.3 23.9 26.6 29.7 36.7 ZHI23 K1P 6.6 6.8 6.9 6.9 6.9 6.8 6.6

ZHI27 K1P 14.2 22.1 25.1 28.4 31.8 35.5 43.8 ZHI27 K1P 7.9 8.2 8.2 8.1 8.1 7.9 7.5

ZHI32 K1P 16.4 26.1 29.5 33.2 37.1 41.4 51.1 ZHI32 K1P 8.7 9.7 9.8 9.8 9.7 9.6 9.4

ZHI35 K1P 19.5 29.2 33.1 37.3 41.9 46.7 57.4 ZHI35 K1P 11.0 10.8 10.9 11.0 11.1 11.2 11.1

ZHI40 K1P 21.7 32.5 36.9 41.7 47.0 52.7 65.6 ZHI40 K1P 12.0 12.0 12.1 12.1 12.2 12.2 12.3

ZHI46 K1P 26.1 38.7 43.5 48.7 54.3 60.4 74.0 ZHI46 K1P 13.2 14.0 14.1 14.1 14.1 14.1 14.0

Capacity Data


R407CHeating Capacity (kW)



Model -30 -15 -10 -5 0 +5 +15 Model -30 -15 -10 -5 0 +5 +15

ZH12K4E n.a. 2.8 3.3 3.9 4.6 5.4 7.5 ZH12K4E n.a. 1.2 1.2 1.3 1.3 1.3 1.4

ZH15K4E n.a. 3.6 4.3 5.0 5.8 6.8 9.2 ZH15K4E n.a. 1.5 1.5 1.6 1.6 1.6 1.9

ZH21K4E n.a. 5.1 5.9 6.9 8.1 9.6 13.2 ZH21K4E n.a. 2.0 2.1 2.1 2.2 2.3 2.4

ZH26K4E n.a. 6.3 7.4 8.7 10.3 12.1 16.5 ZH26K4E n.a. 2.5 2.6 2.7 2.7 2.8 3.0

ZH30K4E n.a. 7.3 8.6 10.1 11.9 14.0 19.2 ZH30K4E n.a. 2.9 3.0 3.1 3.2 3.3 3.4

ZH38K4E n.a. 9.0 10.6 12.5 14.6 17.2 23.4 ZH38K4E n.a. 3.5 3.6 3.8 3.9 4.0 4.2

ZH45K4E n.a. 10.8 12.7 14.9 17.4 20.3 27.2 ZH45K4E n.a. 4.2 4.3 4.5 4.6 4.7 5.1

ZH56K4E n.a. 13.4 15.8 18.6 21.8 25.5 34.1 ZH56K4E n.a. 5.3 5.5 5.7 6.0 6.2 6.8

ZH75K4E n.a. 18.5 21.9 25.8 30.3 35.5 47.6 ZH75K4E n.a. 7.0 7.4 7.7 8.0 8.2 8.5

ZH92K4E n.a. 23.4 27.8 32.8 38.5 45.1 60.3 ZH92K4E n.a. 8.5 9.0 9.5 10.0 10.4 11.2

ZH11M4E n.a. 28.4 33.6 39.5 46.3 54.3 72.7 ZH11M4E n.a. 10.3 10.9 11.5 11.9 12.5 13.4

Models With Enhanced Vapor Injection

Model -30 -15 -10 -5 0 +5 +15 Model -30 -15 -10 -5 0 +5 +15

ZH06KVE 3.3 4.9 5.7 6.5 7.4 8.4 10.8 ZH06KVE 1.7 1.8 1.9 1.9 2.0 2.0 2.1

ZH09KVE 4.1 6.6 7.6 8.7 9.9 11.2 14.3 ZH09KVE 2.1 2.4 2.4 2.5 2.6 2.6 2.6

ZH13KVE 5.7 9.5 10.9 12.5 14.3 16.2 20.7 ZH13KVE 3.0 3.4 3.5 3.5 3.6 3.6 3.7

ZH18KVE 8.0 13.5 15.4 17.6 20.0 22.6 28.7 ZH18KVE 4.2 4.8 4.9 5.0 5.1 5.1 5.2

ZH24KVE 9.7 17.0 19.6 22.5 25.5 28.9 36.7 ZH24KVE 5.2 6.2 6.4 6.6 6.7 6.8 7.0

ZH33KVE 14.3 23.7 27.2 31.1 35.3 40.0 50.7 ZH33KVE 7.0 8.2 8.5 8.8 9.1 9.3 9.6

ZH40KVE 18.1 29.6 34.1 39.1 44.7 50.9 65.5 ZH40KVE 8.9 10.2 10.6 11.0 11.3 11.7 12.4

ZH48KVE 21.1 35.6 41.1 47.2 54.1 61.8 80.4 ZH48KVE 10.0 12.2 12.7 13.2 13.5 14.0 15.1



30

XHV & ZHW Copeland Scroll™ Variable Speed Compressor Ranges for R410A With Inverter Drive

XHV and ZHW Variable Speed scroll compressors for R410A, for outstanding performance for cooling and heating applications.

The new Emerson solution for variable speed applications with capacity modulated compressors. XHV and ZHW compressors deliver outstanding performances, both in new building and retrofit applications. Variable Speed Copeland Scroll compressors feature a state-of-the-art brushless permanent magnet motor matched with a highly efficient drive and vapor injection technology (ZHW only). In addition to Copeland market-proven robustness, XHV and ZHW compressors with the qualified inverter drive meet and exceed the level of reliability expected for these demanding applications.


• Highest efficiency throughout the operating envelope and speed range

• Envelope and speed management information for the system controller (real-time communication via Modbus RS485)

• Enhanced Vapor Injection technology for best seasonal efficiency (ZHW)

• High water temperature for all applications• Compliance with electromagnetic-compatibility (EMC)

and electromagnetic-interference (EMI) requirements for residential applications

• VDE certification for ZHW compressor matched with Emerson inverter drive

• Wide speed range 15-120Hz• Mutually optimized and qualified scroll and drive


• ZHW: Low side PS 28 bar(g) / High side PS 45 bar(g)

• XHV: Low side PS 28 bar(g) / High side PS 45 bar(g)

-40 -30 -20 -10 0 10 20 30

0

10

20

30

40

50

60

70


Con

dens

ing

Tem

pera

ture

°C

XHV

ZHW


Conditions: Cooling kW evaporating 5°C, Condensing 50°C, cuperheat 10K, Subcooling 0K Heating kW evaporating -7°C, Condensing 50°C, 4K Subcooling, 5K Superheat

XHV & ZHW Variable Speed Scroll Compressor Line-Up

kW heatingcapacity

ZHW030

0 5 10 15 20 35

ZHW Copeland Scroll Variable Speed Compressor and Drive

ZHW015

XHV038

XHV025

XHV018

25 30

31

Technical Overview

Capacity Data

Compressor

R410A

Heating Capacity (kW)

COP*

Dis

pla

cem

ent

(cm

3 )

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)

Length/Width/Height (mm) N

et W

eig

ht

(kg

)

Sou

nd

Pr

essu

re

@1

m -

dB

(A)*

*

Min Max

ZHW0152P 2.7 10.4 2.9 15.0 3/4 1/2 1.7 229/198/394 21 68

ZHW0302P 5.5 19.8 3.2 30.0 3/4 1/2 1.7 229/198/394 22 68

XHV0181P 2.9 8.2 2.9 18.0 3/4 1/2 0.7 218/198/334 14 n.a.

XHV0251P 3.9 12.4 2.9 25.0 3/4 1/2 0.7 218/198/334 15 n.a.

XHV0381P 5.5 22.9 3.1 38.0 3/4 1/2 1.2 218/198/414 21 n.a.

Conditions: Heating kW (-7/50)*@ Nominal Speed (90Hz)** @ 1m: sound pressure level at 1m distance from the compressor, free field conditionPreliminary Data





Model -30 -15 -10 -5 0 +5 +15 Model -30 -15 -10 -5 0 +5 +15

ZHW0152PMax 6.0 8.6 9.7 11.0 12.0 12.0 12.4

ZHW0152PMax 3.1 3.3 3.3 3.4 3.2 2.9 2.4

Min 2.0 2.6 2.8 2.9 3.1 3.1 3.8 Min 1.3 1.1 1.1 1.0 0.9 0.9 0.9

ZHW0302PMax 11.3 16.3 18.5 20.8 22.6 22.6 23.7

ZHW0302PMax 5.7 6.0 6.1 6.1 5.7 5.4 4.4

Min 4.2 5.2 5.8 5.9 6.6 6.6 8.1 Min 2.4 2.0 2.0 1.9 1.7 1.7 1.7

Condition: Suction Superheat 10K, Subcooling 4K





Model -20 -15 -10 -5 0 +5 +15 Model -20 -15 -10 -5 0 +5 +15

XHV0181PMax 5.6 6.3 7.3 8.3 9.5 10.9 11.7

XHV0181PMax 2.7 2.7 2.7 2.8 2.8 2.9 2.8

Min 1.9 2.0 2.3 1.2 1.3 1.3 1.7 Min 1.2 1.1 0.9 0.5 0.4 0.4 0.5

XHV0251PMax 9.3 10.5 12.0 13.8 15.8 18.1 19.6

XHV0251PMax 4.3 4.4 4.4 4.5 4.6 4.6 4.6

Min 3.0 3.3 3.8 1.9 2.1 2.2 2.9 Min 1.8 1.6 1.5 0.7 0.7 0.7 0.7

XHV0381PMax 16.0 17.9 20.4 23.3 26.8 30.8 34.0

XHV0381PMax 6.8 7.0 7.1 7.3 7.4 7.5 7.5

Min 4.6 5.5 6.5 2.8 3.3 3.7 4.9 Min 2.5 2.4 2.4 1.1 1.1 1.1 1.1

Condition: Suction Superheat 5K, Subcooling 4KPreliminary Data

Inverter Drive

ModelMatched

Compressor

Power Input (kW)

Amps (A)Cooling

Frequency (Hz) Net Weight

(kg)1Ph

230V3Ph

400VComm.

Length/Width/Height (mm)*

Nominal Nominal Min MaxEV2033M ZHW015 3.3

Air / Liquid

15 120 3.6 √ n.a.

Modbus

228/260/156

EV2037M ZHW015 3.7 15 120 3.6 √ n.a.228/260/119

EV2055M ZHW015-30 5.5 15 120 3.6 √ √

EV2080M ZHW030 8.0 15 120 5.1 √ √ 228/260/156

ED3011A XHV018 2.6 11 15 120 2.8 √ n.a. 205/240/143.5

ED3015A XHV018-25 3.8 15 15 120 3.6 √ n.a. 205/240/143.5

ED3020A XHV025-38 5.0 20 15 120 3.6 √ n.a. 205/250/180.5

ED3013B XHV018-25 3.8 13 15 120 3.6 n.a. √ 205/250/183.5

ED3018B XHV025-38 5.0 18 15 120 3.6 n.a. √ 205/250/183.5

ED3022B XHV038 8.0 22 15 120 5.1 n.a. √ n.a.Conditions: Suction Superheat 5K, Subcooling 4K*Air Cooled Version Including FinsPreliminary Data

32

ZH*KCE R134a Copeland Scroll compressors were developed for the recovery and reuse of available heat. For example, the heat generated by processes or machining cooling equipment can be recovered and not wasted. This contributes to reducing the total energy cost of installations. On a water-cooled chiller, heat recovery on the condensing water loop can be used to produce high temperature water for sanitary or premise heating. With a typical evaporating temperature between 20°C and 40°C and condensing up to 85°C, ZH*KCE scrolls offer many opportunities of heat recovery.

The range of products goes from the ZH40KCE (7.5hp) to the ZH150 (30hp) which can be tandemized.

ZH*KCE Scroll Compressor Line-Up R134a

Operating Envelope R134aFeatures and Benefits


• Wide scroll line-up R134a with 8 models and tandem• Low sound and vibration level• Low oil circulation rate• Copeland qualified tandem

Typical Applications

• Heat recovery on the dry cooler water circuit of a water- cooled chiller to produce sanitary water or other heating

• Re-inject energy to district heating network and avoid wasting it

• Process industry where the water returning from the machinery comes back between 20 and 40°C

• Food industry where one areas needs cooling and another heating at the same time

• Air-to-water heat pump, even during the warm season• Exhaust air heat recovery system• Heat recovery on Fluegas

ZH Copeland Scroll™ for Heat Recovery and High Condensing Applications for R134a

0 40 80 320120 160 200kW Heating Capacity

240 280

Single

Tandem

20 60 100 140 180 220 260 300

-20 -10 0 10 20 30 40 50

5

25

35

45

55

65

75

85


Con

dens

ing

Tem

pera

ture

°C

15

95


Low side PS 20 bar(g) / High side PS 32 bar(g)

Conditions: Evaporating 40°C, Condensing 85°C, Superheat 10K, Subcooling 5K

ZH*KCE Scroll Compressor for Heat Recovery

33

ModelsN

om

inal

h

p

Hea

tin

g C

apac

ity

(kW

)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(in

ch)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)

Len

gth

/Wid

th/

Hei

gh

t (m

m)

Net

Wei

gh

t (k

g)

Mot

or

Ver

sio

n

/ Co

de

Max

imu

m

Op

erat

ing

C

urr

ent

(A)

Lock

ed R

oto

r C

urr

ent

(A)

Sou

nd

Pre

ssu

re

@1

m -

dB

(A)*

*

3 Ph* 3 Ph* 3 Ph*

ZH40KCE 7.5 39.0 4.3 22.1 1 1 / 8 7 / 8 2.7 264 / 285 / 476 57 TFD 19.2 95 63

ZH45KCE 9.0 44.0 4.6 24.9 1 3 / 8 7 / 8 3.4 264 / 285 / 533 60 TFD 21.1 111 63

ZH50KCE 10.0 50.9 4.5 29.1 1 3 / 8 7 / 8 3.4 264 / 285 / 533 61 TFD 23.6 118 63

ZH64KCE 13.0 63.7 4.3 36.4 1 3 / 8 7 / 8 3.4 264 / 285 / 552 65 TFD 27.1 140 68

ZH75KCE 15.0 76.0 4.2 43.4 1 3 / 8 7 / 8 3.4 264 / 285 / 552 66 TFD 35.3 174 71

ZH100KCE 20.0 96.1 4.0 56.6 1 5 / 8 1 3 / 8 4.7 432 / 376 / 694 140 TWD 42.7 225 72

ZH125KCE 25.0 120.0 4.1 71.4 1 5 / 8 1 3 / 8 6.8 447 / 392 / 717 160 TWD 53.4 272 74

ZH150KCE 30.0 148.8 4.2 87.5 1 5 / 8 1 3 / 8 6.3 447 / 427 / 717 177 TWD 67.6 310 76

Conditions Evaporating 40°C - Condensing 85°C - Superheat 5K - Subcooling 4K* 3 Ph: 380-420V/ 50Hz** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Technical Overview

Capacity DataCondensing Temperature +80°C

R134aHeating Capacity (kW)

R134aPower Input (kW)


Models +10 +15 +20 +25 +30 +35 +40 Models +10 +15 +20 +25 +30 +35 +40

ZH40KCE 16.9 19.7 22.9 26.5 30.7 35.6 41.1 ZH40KCE 8.3 8.3 8.2 8.1 8.1 8.1 8.1

ZH45KCE 20.2 23.2 26.5 30.5 35.0 40.3 46.5 ZH45KCE 8.7 8.7 8.7 8.7 8.7 8.7 8.7

ZH50KCE 23.1 26.6 30.6 35.2 40.5 46.7 53.8 ZH50KCE 10.2 10.2 10.2 10.2 10.2 10.2 10.2

ZH64KCE 28.7 33.1 38.1 43.9 50.7 58.4 67.3 ZH64KCE 13.5 13.5 13.4 13.4 13.5 13.5 13.6

ZH75KCE 34.8 39.9 45.8 52.6 60.5 69.7 80.3 ZH75KCE 16.2 16.2 16.2 16.2 16.3 16.4 16.7

ZH100KCE 46.4 52.6 59.9 68.3 77.9 88.9 101.5 ZH100KCE 21.1 21.3 21.4 21.5 21.5 21.5 21.6

ZH125KCE 57.6 65.4 74.4 84.8 96.9 111.0 127.0 ZH125KCE 27.6 26.6 26.6 26.5 26.4 26.3 26.3

ZH150KCE 71.0 80.7 91.9 105.0 120.0 137.0 157.0 ZH150KCE 30.7 31.2 31.5 31.8 32.0 32.3 32.5


34

ZRH & ZRHV Copeland Scroll™ Horizontal Compressor Rangesfor R407C and R134a, for the specific needs of transport air conditioning

Air conditioning for passenger comfort is a pre-requisite in today’s public transport vehicles. At the same time, maximization of passenger space and streamlining of high speed trains increasingly impose limitations on height.

ZRH compressors are based on the unique Copeland Scroll design and provide the same reliability as a standard Copeland Scroll. The addition of an oil pump covers the specific needs of transport air conditioning and of horizontal compressor arrangement in general.The low profile design and modulation capabilities of the ZRH compressor range are the ideal response to these market needs.

ZRH Scroll Compressors Line-up R407C and R134a

kW Cooling0 1 6

R407C Line-up

R134a Line-up

7 8 9 11 20132 3 4 5 10 12 14


Low Side PS 21 bar(g) / High Side PS 28.8 bar(g)


• Compactness and low weight• Horizontal design with less than 250mm height• Copeland Scroll compliance for superior reliability

and efficiency• Additional oil-pump• Reduction of potential risk of refrigerant leakage

through the drive shaft sealing• Capacity modulation from 70% to 150% for Quest

models ZRHV

Operating Envelope R407C Operating Envelope R134a

15 16 17 18 19

Con

dens

ing

Tem

pera

ture

°C


60

-15 -5 5 15

70

-20 -10 0 10

10K Suction Superheat Maximum Evaporating Temperature

25°C Suction Gas Return

30

40

50

Conditions: EN12900: Evaporating 5°C, Condensing 50°C, Superheat 10K, Subcooling 0K

Horizontal Scroll Compressor

21 22C

onde

nsin

g Te

mpe

ratu

re °C


10K Suction Superheat Maximum Evaporating Temperature


-15 -5 5 15-20 -10 0 10

60

70

30

40

50

35

Technical Overview - Fixed Speed Models

ModelsN

om

inal

h

p

Cap

acit

y (k

W)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b

Dis

char

ge

(in

ch)

Oil

Qu

anti

ty

(l)

Length/Width/Height

(mm)

Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

Locked Rotor

Current (A)

Sou

nd

Pr

essu

re

@1

m -

dB

(A)*

*

3 Ph* 3 Ph* 3 Ph*

ZRH49KJE 4.0 10.4 2.9 11.8 7 / 8 1 / 2 1.8 487/290/231 52 TFD 9 52 66

ZRH61KJE 5.0 13.2 3.1 14.5 7 / 8 1 / 2 1.8 487/290/231 53 TFD 12 64 67

ZRH72KJE 6.0 15.2 3.1 17.1 7 / 8 1 / 2 1.8 487/290/231 54 TFD 12 74 68

ZRH78KTE 7.0 16.7 3.0 19.8 1 3 / 8 7 / 8 1.6 585/313/250 60 TFD 14 100 74

ZRH87KTE 7.5 18.8 3.0 22.1 1 3 / 8 7 / 8 1.6 585/313/250 60 TFD 16 95 74

ZRH100KTE 9.0 21.5 3.1 24.9 1 3 / 8 7 / 8 1.6 585/313/250 63 TFD 18 111 74

ZRH116KTE 10.0 25.1 3.1 29.1 1 3 / 8 7 / 8 1.6 585/313/250 64 TFD 20 118 74

Conditions: EN12900 R407C - HT: Evaporating +5°C, Condensing +50°C, suction Superheat 10K, Subcooling 0K*TFD: 3Ph 380-420V/50Hz - 460/60Hz; TF5 200-220V/50Hz, 200-230V/60Hz** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Capacity Data - Fixed Speed Models





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZRH49KJE 5.6 6.9 8.5 10.4 12.6 15.0 ZRH49KJE 3.1 3.3 3.4 3.5 3.6 3.8

ZRH61KJE 7.2 8.8 10.8 13.2 15.9 19.0 ZRH61KJE 3.8 4.0 4.2 4.3 4.5 4.6

ZRH72KJE 8.1 10.1 12.4 15.2 18.4 22.2 ZRH72KJE 4.3 4.5 4.7 4.9 5.0 5.1

ZRH78KTE 10.3 13.4 16.7 20.5 ZRH78KTE 5.4 5.5 5.5 5.5

ZRH87KTE 15.6 14.8 18.8 23.5 ZRH87KTE 6.1 6.2 6.2 6.2

ZRH100KTE 13.8 17.4 21.5 26.3 ZRH100KTE 6.7 6.8 6.9 6.9

ZRH116KTE 16.1 20.2 25.1 30.8 ZRH116KTE 7.9 8.0 8.0 8.1



R134aCooling Capacity (kW)



Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZRH49KJE 2.8 3.7 4.7 5.9 7.3 8.9 10.7 ZRH49KJE 2.0 1.1 2.2 2.3 2.4 2.5 2.6

ZRH61KJE 3.6 4.6 5.9 7.3 8.9 10.9 13.1 ZRH61KJE 2.3 2.5 2.6 2.7 2.8 2.9 3.1

ZRH72KJE 4.3 5.6 7.0 8.6 10.5 12.6 15.0 ZRH72KJE 2.6 2.8 3.0 3.1 3.0 3.4 3.5

ZRH78KTE 4.2 5.5 7.1 9.0 11.3 13.9 17.0 ZRH78KTE 3.5 3.6 3.7 3.8 3.8 3.9 4.0

ZRH87KTE 4.3 5.8 7.6 9.8 13.3 15.2 18.7 ZRH87KTE 3.9 4.0 4.0 4.1 4.1 4.1 4.0

ZRH100KTE 4.8 6.6 8.7 11.2 14.2 17.6 21.7 ZRH100KTE 4.2 4.4 4.4 4.5 4.4 4.5 4.5

ZRH116KTE 6.4 8.4 10.8 13.6 16.9 10.8 25.3 ZRH116KTE 5.5 5.6 5.6 5.6 5.5 5.5 5.5


Models

Capacity (kw)

COP

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b

dis

char

ge

(in

ch)

Oil

Qu

anti

ty

(l)

Length/Width/Height

(mm)

Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

Locked Rotor

Current (A)

Sou

nd

p

ress

ure

@

1 m

- d

b(a

)**

Min Max 3 Ph* 3 Ph* 3 Ph*

ZRHV72KJE 13.3 22.0 2.8 17.1 7 / 8 1 / 2 1.8 487/290/231 53 TFD 15 100 66

ZRHV94KJE 18.6 32.9 2.8 23.9 1 3 / 8 7 / 8 1.6 584/305/230 60 TFD 21 140 73

Technical Overview - Variable Speed Models

Conditions: EN12900 R407C - HT: Evaporating +5°C, Condensing +50°C, Suction Superheat 10K,Subcooling 0K*TFD: 3Ph 380-420V/50Hz - 460/60Hz; TF5 200-220V/50Hz, 200-230V/60Hz** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

36





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZRHV72KJEMax 11.8 14.8 18.2 22.1 26.5 31.2

ZRH49KJEMax 6.8 7.2 7.5 7.9 8.4 8.9

Min 7.1 8.9 10.9 13.3 15.9 18.7 Min 4.1 4.3 4.5 4.8 5.0 5.3

ZRHV94KJEMax 17.3 21.3 25.9 31.0 36.7

ZRH61KJEMax 8.4 8.8 9.3 9.8 10.4

Min 12.4 15.3 18.6 22.2 26.2 Min 6.0 6.3 6.7 7.0 7.5

Capacity Data - Variable Speed Models





Model -15 -10 -5 0 +5 +10 +15 Model -15 -10 -5 0 +5 +10 +15

ZRHV72KJEMax 8.5 10.6 13.0 15.8 18.9 22.3

ZRH49KJEMax 4.8 5.1 5.4 5.7 6.0 6.3

Min 5.1 6.3 7.8 9.5 11.3 13.4 Min 2.9 3.1 3.2 3.4 3.6 3.8

ZRHV94KJEMax 12.4 15.2 18.5 22.2 26.2

ZRH61KJEMax 0.0 6.0 6.3 6.7 7.0

Min 8.9 10.9 13.3 15.9 18.7 Min 0.0 4.3 4.5 4.8 5.0



37

Refrigeration Applications

39

Refrigeration Applications

Emerson offers a wide range of solutions for commercial

refrigeration applications. With its long-lasting expertise

in semi- hermetic reciprocating compressor technology as

well as in scroll technology, we can meet the requirements

for most applications - at the small end just like at the large

end of commercial refrigeration.

Completed by the various offerings in the segment of

refrigeration units, Emerson is able to offer the best solution

and performance, whether you are looking for applications

in foodservice or processing, supermarkets, hypermarkets,

petrol stations or refrigerated warehousing.

Emerson prime focus for its semi-hermetic reciprocating

technology is at the large end of commercial refrigeration.

Here aspects such as reliability, serviceability and capacity

modulation are of importance and they are perfectly

provided by Emerson semi-hermetic reciprocating

compressors. Innovations like the DiscusTM and Stream

technologies, digital modulation and CoreSenseTM

Diagnostics for advanced protection and preventive

maintenance keep semi-hermetic at the forefront of

compressor technology.

Especially when compact equipment, energy efficiency and

reliability are musts, the scroll technology is the preferred

choice for refrigeration applications. With developments

such as vapor injection and digital modulation, scroll has

become the leading technology and is widely recognized in

the refrigeration market.

CoreSense™ Diagnostics is now also available as an option

for the new scroll Summit series for medium and low

temperature applications.

Whatever the chosen technology and product solution,

Emerson’s range meets the specific refrigeration needs

covering the entire spectrum of medium and low

temperature applications whether using standard HFCs,

low GWP or natural refrigerants.

40

As an extension to the existing ZB*KCE scroll range, the new Copeland Scroll ZS*KA compressor range represents the latest innovation in scroll technology for refrigeration equipment covering a small size displacement range of 4 m3/h to 5 m3/h. As with other existing Copeland Scroll compressors scrolls, ZS*KA scrolls feature a scroll compliance mechanism which makes them particularly robust and reliable under severe conditions including liquid slugging.

ZS*KA models are intended for medium temperature refrigeration type systems, and are ideally suited for applications such as walk-ins, reach-ins, cold rooms, display cases, and milk tank units. They are multi-refrigerant capable and feature low sound and low vibration particularly important in the retail and food service sector and recommended for supermarket, restaurant, convenience store, and milk cooling operations.

The ZS*KA range from 1.3hp to 1.8hp is designed to provide seasonal efficiencies up to 28% higher than the equivalent hermetic reciprocating compressors. These compressors are qualified for today’s HFC as well as new low GWP refrigerants and HFO blends.

ZS*KA Copeland Scroll™ Small Compressor Range for Medium Applications



• High seasonal efficiencies as scrolls are designed at the condition where equipment runs most of the time

• Up to 15% efficiency advantage over hermetic reciprocating compressors at rating conditions, and up to 28% improvement at lower condensing temperatures

• Availability of optional sound shell on all models providing up to 10 dBA additional sound attenuation for silent operation

• Wide operating range from -25°C to 10°C covering a minimum condensing limit of 10°C

• Qualified for R407A/F/C, R448A, R449A, R404A and R134a refrigerants


• ZS09 to ZS13KA: Low Side PS 21.6 bar(g) / High Side PS 31.9 bar(g)

ZS*KA Compressor Line-up

ZS

Displacement (m3/h)

60 42

ZS*KA Copeland Scroll™ Compressor Range forMedium Temperature Refrigeration Applications

41

Operating Envelope ZS*KA R404AC

onde

nsin

g Te

mpe

ratu

re °C


0

10

20

30

40

50

60

-30 -25 -15 -5 5

70

-20 -10 0 10

20°C Suction Gas Return20K Suction Superheat

Operating Envelope ZS*KA R134aC

onde

nsin

g Te

mpe

ratu

re °C



Operating Envelope ZS*KAR448A/R449A

Con

dens

ing

Tem

pera

ture

°C


20°C Suction Gas Return10K Suction Superheat

-30 -25 -15 -5 5-20 -10 0 100

10

20

30

40

50

60

70

0

10

20

30

40

50

60

-30 15-25 -15 -5 5

70

-20 -10 0 10

1515

For individual model details please refer to select software

42

Models

No

min

al h

p

Dis

pla

cem

ent

(m3 /h

)

Rota

lock

Su

ctio

n (i

nch

)

Rota

lock

D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty (l

)


Net

Wei

gh

t (k

g) Motor

Version/ CodeMaximum Operating

Current (A)Locked Rotor

Current (A)

Sou

nd

Pre

ssu

re

@1

m -

dB

(A)*

**

1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

Medium Temperature

ZS09KAE 1.3 3.7 3 / 4 1 / 2 0.7 246/246/387 22.2 PFJ TFD 7.2 3.0 45.0 27.0 58.0

ZS11KAE 1.5 4.4 3/ 4 1 / 2 0.7 246/246/387 22.4 PFJ TFD 8.7 3.3 45.0 27.0 58.0

ZS13KAE 1.8 5.0 3/ 4 1 / 2 0.7 246/246/387 21.4 PFJ TFD 9.9 4.0 54.0 29.0 59.0

Technical Overview

* 1Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Capacity DataCondensing Temperature 40°C




Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZS09KAE 0.9 1.1 1.4 1.7 ZS09KAE 0.5 0.6 0.6 0.6

ZS11KAE 1.1 1.3 1.7 2.0 ZS11KAE 0.6 0.7 0.7 0.7

ZS13KAE 1.2 1.5 1.9 2.3 ZS13KAE 0.7 0.8 0.8 0.8

Condensing Temperature 40°C

R407FCooling Capacity (kW)

R407FPower Input (kW)


Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZS09KAE 1.2* 1.5 1.9 2.3 2.7 ZS09KAE 0.8* 0.8 0.9 0.9 0.9

ZS11KAE 1.4* 1.8 2.2 2.7 3.3 ZS11KAE 1.0* 1.0 1.1 1.1 1.1

ZS13KAE 1.6* 2.1 2.6 3.1 3.7 ZS13KAE 1.1* 1.2 1.2 1.2 1.3

Conditions: Suction Gas Return 20°C / Subcooling 0K

Conditions: Suction Gas Return 20°C / Subcooling 0K*Conditions: Suction Superheat 10K, Subcooling 0KPreliminary Data

43

Capacity DataCondensing Temperature 40°C

R448A/R449A

Cooling Capacity (kW) R448A/R449A

Power Input (kW)


Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZS09KAE 1.0* 1.5 1.9 2.3 2.7 ZS09KAE 0.8* 0.8 0.9 0.9 0.9

ZS11KAE 1.2* 1.8 2.2 2.7 3.3 ZS11KAE 1.0* 1.0 1.1 1.1 1.1

ZS13KAE 1.4* 2.1 2.6 3.1 3.7 ZS13KAE 1.1* 1.2 1.2 1.2 1.3





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZS09KAE 1.1* 1.5 1.9 2.3 2.8 ZS09KAE 0.9* 0.9 1.0 1.0 1.0

ZS11KAE 1.3* 1.9 2.3 2.8 3.3 ZS11KAE 1.0* 1.1 1.1 1.2 1.2

ZS13KAE 1.5* 2.1 2.6 3.1 3.8 ZS13KAE 1.2* 1.3 1.3 1.4 1.4





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZS09KAE 0.9 1.1 1.4 1.7 2.8 ZS09KAE 0.5 0.6 0.6 0.6 1.0

ZS11KAE 1.1 1.3 1.7 2.0 3.3 ZS11KAE 0.6 0.7 0.7 0.7 1.2

ZS13KAE 1.2 1.5 1.9 2.3 3.8 ZS13KAE 0.7 0.8 0.8 0.8 1.4

Conditions: Suction Gas Return 20°C / Subcooling 0K*Conditions: Suction Superheat 10K, Subcooling 0K

Conditions: Suction Gas Return 20°C / Subcooling 0K*Conditions: Suction Superheat 10K, Subcooling 0K

Conditions: Suction Gas Return 20°C / Subcooling 0K

44

Emerson offers ZB compressors with a wide displacement rage from 5.9 m3/h to 87.5 m3/h. It includes digital compressor models that offers continuous capacity modulation technology.

Copeland Scroll compressors have 3 times less moving parts than reciprocating compressors and feature a scroll compliance mechanism which makes them particularly robust and reliable under severe conditions including liquid slugging.

They have the advantage of light weight and compactness, making them ideal for the usage in refrigeration units, compact refrigeration systems or special process units.

The Summit Series from 7 to 15 hp is designed to provide seasonal efficiencies 15% higher than traditional semi-hermetic compressors. These compressors are extremely quiet and can be fitted with an external sound shell for an additional 10 dBA sound reduction, which makes them best choice for refrigeration applications in urban and domestic areas.

The ZB range also features ZB220 (30hp), the largest refrigeration scroll available on the market. These compressors are qualified for R407A/F/C, R448A, R449A, R404A and R134a. CoreSense™ Diagnostics is now available as an option for the ZB Scroll Summit series (ZB66K5E, ZB76K5E, ZB95K5E and ZB114K5E) as well as for Summit Digital ZBD*K5E Series.

ZB and ZBD Compressor Line-up

Displacement (m3/h)

Digital ZBD

25 35 550 65 75

ZB

15 45 85 90 95 100



• Wide operating envelope with 10°C condensing limit and fast pull-down capabilities

• High seasonal efficiencies as scrolls are designed at the condition where equipment runs most of the time

• Light weight and compactness, up to half the weight of equivalent semi-hermetic compressors

• Availability of optional sound shell on all models providing an additional 10 dBA sound attenuation for silent operation

• Includes 12 Digital Scroll compressor models for simple, stepless 10 to 100% capacity modulation

• One model for multiple refrigerants R407A/F/C, R448A/R449A, R404A, R134a, R450A and R513A

30 40 60 70 8020 50


• ZB15 to ZB45: Low Side PS 21 bar(g) / High Side PS 32 bar(g)

• ZB50 to ZB220: Low Side PS 22.6 bar(g) / High Side PS 32 bar(g)

• Digital ZBD: Low Side PS 21 bar(g) / High Side PS 28.8 bar(g)

• Summit ZBD: Low Side PS 22.6 bar(g) / High Side PS 32 bar (g)

ZB Copeland Scroll™ Compressor Ranges for Medium Temperature RefrigerationUsing R407A/F/C, R448A/R449A, R404A, R134a, R450A and R513A

5 10

For more details on digital models please refer to page 58 in the catalogue.

ZB Compressor for Medium Temperature Refrigeration With

and Without Sound Shell

45

Operating Envelope R448A/R449AC

onde

nsin

g Te

mpe

ratu

re °C


0

10

20

30

40

50

60

-30 15-25 -15 -5 5

70

-20 -10 0 10

20°C Suction Gas Return 10K Superheat


Con

dens

ing

Tem

pera

ture

°C



Operating Envelope R134a - for ZBD Digital Models

Con

dens

ing

Tem

pera

ture

°C


0

10

20

30

40

50

60

20-20 -10 0 10

80

-15 -5 5 15


70

For individual model details please refer to select software.

0

10

20

30

40

50

60

-30 15-25 -15 -5 5

70

-20 -10 0 10

46

Technical Overview

* 1Ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

ModelsN

om

inal

hp

Dis

pla

cem

ent

(m3 /h

)

Rota

lock

su

ctio

n (i

nch

)

Rota

lock

D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty (l

)


Net

Wei

gh

t (k

g)

Motor Version/Code

Maximum Operating

Current (A)


Sou

nd

Pre

ssu

re@

1 m

- d

B(A

)***

1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

ZB15KCE 2.0 5.9 1 1 / 4 1 1.3 241/241/369 25.4 PFJ TFD 12.8 4.9 58.0 26.0 55.0

ZB19KCE 2.5 6.8 1 1 / 4 1 1.5 242/242/369 27.2 PFJ TFD 12.8 6.5 61.0 32.0 55.0

ZB21KCE 3.0 8.6 1 1 / 4 1 1.2 243/244/391 29.0 PFJ TFD 16.4 7.2 82.0 40.0 58.0

ZB26KCE 3.5 10.0 1 1 / 4 1 1.5 243/244/405 28.0 PFJ TFD 18.0 8.9 97.0 46.0 60.0

ZB29KCE 4.0 11.4 1 1 / 4 1 1.5 246/246/423 28.6 TFD 10.0 50.0 58.0

ZB38KCE 5.0 14.4 1 1 / 4 1 1.9 242/242/438 37.4 PFJ TFD 32.3 12.8 142.0 65.5 61.0

ZB42KCE 5.5 16.2 1 1 / 4 1 1.9 251/246/438 43.0 PFJ 35.7 150.0 62.0

ZB45KCE 6.0 17.1 1 1 / 4 1 1.9 242/242/438 39.5 TFD 13.1 74.0 61.0

ZB48KCE 6.5 18.8 1 1 / 4 1 1 / 4 1.8 246/250/442 39.0 TFD 14.0 101.0 62.0

ZB57KCE 21.4 1 1 / 4 1 1 / 4 1.9 246/256/442 39.5 TFD 15.9 102.0 68.0

ZB220KCE 30.0 87.5 2 3 / 4 1 3 / 4 6.3 448/392/715 176.0 TWM 69.0 310.0 78.0

ZB Summit Models

ZB66K5E 10.0 25.7 1 3 / 4 1 1 / 4 3.4 280/280/534 59.9 TFD 17.5 111.0 66.0

ZB76K5E 12.0 28.8 1 3 / 4 1 1 / 4 3.4 280/280/534 61.2 TFD 20.4 118.0 67.0

ZB95K5E 13.0 36.4 1 3 / 4 1 1 / 4 3.4 280/280/552 64.9 TFD 28.2 140.0 69.0

ZB114K5E 15.0 43.4 1 3 / 4 1 1 / 4 3.4 280/280/552 66.2 TFD 33.5 174.0 72.0

47

Capacity Data





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZB15KCE 2.1* 2.8 3.5 4.2 ZB15KCE 1.5* 1.5 1.5 1.5

ZB19KCE 2.6* 3.4 4.2 5.2 ZB19KCE 1.7* 1.8 1.8 1.8

ZB21KCE 3.0* 4.0 5.1 6.3 ZB21KCE 2.0* 2.0 2.0 2.1

ZB26KCE 3.6* 4.7 5.8 7.1 ZB26KCE 2.3* 2.3 2.3 2.4

ZB29KCE 4.2* 5.6 7.0 8.6 ZB29KCE 2.6* 2.6 2.6 2.6

ZB38KCE 5.4* 7.2 8.9 11.0 ZB38KCE 3.2* 3.3 3.3 3.4

ZB42KCE** 6.1* 7.9 9.8 12.0 ZB42KCE** 3.9* 3.9 3.9 3.9

ZB45KCE 6.3* 8.2 10.2 12.4 ZB45KCE 3.9* 4.0 4.0 4.0

ZB48KCE 7.3* 9.5 11.7 14.3 ZB48KCE 4.5* 4.5 4.6 4.5

ZB57KCE 8.4* 11.1 13.8 17.0 ZB57KCE 5.2* 5.2 5.3 5.3

ZB Summit Models

ZB66K5E 9.2* 12.4 15.6 19.3 ZB66K5E 5.5* 5.5 5.7 5.8

ZB76K5E 10.6* 14.2 18.1 22.4 ZB76K5E 6.5* 6.5 6.7 6.9

ZB95K5E 12.9* 17.7 22.5 27.8 ZB95K5E 8.3* 8.3 8.5 8.7

ZB114K5E 14.8* 20.5 26.3 32.8 ZB114K5E 10.2* 10.2 10.3 10.5





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZB15KCE 2.6* 3.4 4.2 ZB15KCE 1.6* 1.6 1.6

ZB19KCE 3.2* 4.2 5.1 ZB19KCE 1.9* 1.9 1.9

ZB21KCE 3.9* 5.0 6.2 ZB21KCE 2.2* 2.2 2.3

ZB26KCE 4.5* 5.8 7.2 ZB26KCE 2.6* 2.6 2.6

ZB29KCE 5.4* 7.0 8.7 ZB29KCE 2.8* 2.9 2.8

ZB38KCE 5.2* 6.9* 8.9 11.0 ZB38KCE 3.7* 3.7* 3.7 3.7

ZB42KCE** 5.9* 7.8* 10.1 12.5 ZB42KCE** 4.0* 4.0* 4.0 4.0

ZB45KCE 6.0* 8.1* 10.5 13.0 ZB45KCE 4.1* 4.2* 4.3 4.2

ZB48KCE 7.0* 9.3* 12.1 15.0 ZB48KCE 4.7* 4.8* 4.9 4.9

ZB57KCE 7.9* 10.6* 13.7 16.8 ZB57KCE 4.7* 5.0* 5.3 5.5

ZB Summit Models

ZB66K5E 9.5* 13.0* 16.9 20.9 ZB66K5E 5.8* 5.8* 5.9 6.1

ZB76K5E 10.9* 15.0* 19.6 24.2 ZB76K5E 6.9* 6.8* 7.0 7.2

ZB95K5E 13.3* 18.6* 24.4 30.1 ZB95K5E 8.8* 8.8* 8.9 9.1

ZB114K5E 15.3* 21.5* 28.5 35.4 ZB114K5E 10.7* 10.7* 10.8 11.0

Suction Gas Return 20°C / Subcooling 0K*Suction Superheat 10K** Single Phase OnlyPreliminary Data

Suction Gas Return 20°C / Subcooling 0K*Suction Superheat 10K** Single Phase OnlyPreliminary Data

48

Capacity Data


R448A/R449A


Power Input (kW)


Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZB15KCE 1.5* 2.2 2.8 3.5 4.3 ZB15KCE 1.6* 1.5 1.5 1.4 1.4

ZB19KCE 1.9* 2.6 3.2 4.0 4.9 ZB19KCE 1.7* 1.7 1.7 1.7 1.7

ZB21KCE 2.5* 3.3 4.2 5.2 6.4 ZB21KCE 2.0* 2.0 2.0 2.0 2.0

ZB26KCE 2.9* 3.9 4.9 6.0 7.4 ZB26KCE 2.3* 2.4 2.4 2.4 2.4

ZB29KCE 3.3* 4.4 5.5 6.8 8.2 ZB29KCE 2.6* 2.6 2.6 2.7 2.7

ZB38KCE 3.9* 5.7 7.2 8.9 10.9 ZB38KCE 3.4* 3.4 3.4 3.4 3.4

ZB42KCE** 4.4* 6.4 8.1 10.1 12.3 ZB42KCE** 3.9* 3.9 3.9 3.9 3.9

ZB45KCE 4.5* 6.6 8.4 10.5 12.8 ZB45KCE 3.9* 3.9 3.9 3.9 3.9

ZB48KCE 5.3* 7.6 9.7 12.1 14.7 ZB48KCE 4.5* 4.5 4.5 4.5 4.5

ZB57KCE 6.0* 8.7 11.0 13.6 16.5 ZB57KCE 4.3* 4.5 4.7 4.9 5.1

ZB220KCE 32.4* 43.1 53.7 65.7 ZB220KCE 20.3* 20.3 20.4 20.6

ZB Summit Models

ZB66K5E 6.8* 9.4* 12.7 15.8 19.3 ZB66K5E 5.8* 5.8* 5.8 5.8 5.8

ZB76K5E 8.0* 11.1* 14.9 18.6 22.7 ZB76K5E 6.5* 6.6* 6.6 6.6 6.7

ZB95K5E 8.8* 13.2* 18.2 22.8 27.8 ZB95K5E 8.7* 8.6* 8.6 8.6 8.7

ZB114K5E 10.6* 15.6* 21.5 27.3 33.7 ZB114K5E 10.5* 10.3* 10.3 10.3 10.4

Suction Gas Return 20°C / Subcooling 0K*Suction Superheat 10K, Subcooling 0K** Single Phase OnlyPreliminary Data

49

Capacity Data





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZB15KCE 1.9 2.4 3.0 3.7 4.5 ZB15KCE 1.7 1.7 1.6 1.6 1.5

ZB19KCE 2.3 2.9 3.5 4.2 5.1 ZB19KCE 1.9 1.9 1.9 1.9 1.9

ZB21KCE 3.0 3.7 4.5 5.5 6.6 ZB21KCE 2.2 2.2 2.2 2.2 2.2

ZB26KCE 3.5 4.3 5.3 6.4 7.6 ZB26KCE 2.6 2.6 2.6 2.6 2.6

ZB29KCE 4.0 4.9 6.0 7.2 8.6 ZB29KCE 2.9 2.9 2.9 2.9 2.9

ZB38KCE 5.1 6.3 7.7 9.3 11.2 ZB38KCE 3.8 3.8 3.8 3.8 3.8

ZB42KCE** 5.7 7.1 8.7 10.6 12.7 ZB42KCE** 4.2 4.2 4.2 4.2 4.2

ZB45KCE 6.0 7.4 9.1 11.0 13.2 ZB45KCE 4.3 4.3 4.3 4.3 4.3

ZB48KCE 6.9 8.6 10.5 12.7 15.2 ZB48KCE 4.9 4.9 4.9 4.9 4.9

ZB57KCE 7.9 9.7 11.9 14.3 17.1 ZB57KCE 4.7 4.9 5.2 5.4 5.5

ZB220KCE 28.5* 39.2 47.7 57.5 68.9 ZB220KCE 21.4* 21.8 22.0 22.2 22.4

ZB Summit Models

ZB66K5E 9.1 11.4 13.9 16.8 20.1 ZB66K5E 6.2 6.2 6.2 6.3 6.4

ZB76K5E 10.5 13.1 16.2 19.7 23.6 ZB76K5E 7.2 7.2 7.3 7.4 7.5

ZB95K5E 10.7* 16.0 20.1 24.5 29.3 ZB95K5E 9.3* 9.2 9.3 9.3 9.4

ZB114K5E 12.5* 18.7 23.4 28.7 34.7 ZB114K5E 11.3* 11.3 11.3 11.4 11.4

Suction Gas Return 20°C / Subcooling 0K*Suction Superheat 10K, Subcooling 0K** Single Phase Only





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZB15KCE 1.4 1.7 2.2 2.7 ZB15KCE 0.9 0.9 0.9 0.9

ZB19KCE 1.6 2.0 2.5 3.1 ZB19KCE 1.1 1.1 1.1 1.1

ZB21KCE 2.0 2.5 3.2 4.0 ZB21KCE 1.3 1.3 1.3 1.3

ZB26KCE 2.3 2.9 3.7 4.6 ZB26KCE 1.5 1.5 1.5 1.5

ZB29KCE 2.5 3.2 4.0 5.0 ZB29KCE 1.7 1.7 1.7 1.7

ZB38KCE 3.2 4.2 5.4 6.7 ZB38KCE 2.1 2.1 2.1 2.2

ZB42KCE** 3.8 4.8 6.0 7.5 ZB42KCE** 2.5 2.5 2.5 2.4

ZB45KCE 4.0 5.1 6.4 8.0 ZB45KCE 2.4 2.4 2.5 2.5

ZB48KCE 4.8 6.0 7.5 9.1 ZB48KCE 2.8 2.8 2.9 2.9

ZB57KCE 5.0 6.4 8.1 10.1 ZB57KCE 3.4 3.4 3.4 3.5

ZB220KCE 27.3 34.1 42.1 ZB220KCE 13.0 13.2 13.5

ZB Summit Models

ZB66K5E 6.0 7.5 9.5 11.8 ZB66K5E 3.8 3.7 3.8 3.8

ZB76K5E 6.9 8.6 10.8 13.5 ZB76K5E 4.4 4.4 4.4 4.5

ZB95K5E 8.2 10.8 13.8 17.1 ZB95K5E 5.4 5.5 5.5 5.6

ZB114K5E 9.6 12.7 16.3 20.4 ZB114K5E 6.6 6.6 6.7 6.7

Suction Gas Return 20°C / Subcooling 0K** Single Phase Only

50

Emerson developed the ZF range to provide the best performance in low temperature. The range has a wide application envelope as it can operate from -40°C evaporating temperature to +7°C. They have been optimized in their design to perfectly fit frozen food application requirements. Thanks to their scroll compliance mechanism, these scroll compressors feature particularly high tolerance to liquid slugging.

The range consists of:• The ZF*K4E models that operate with liquid injection in order to

control discharge temperature and increase the operating envelope.• The ZF*KVE models that are optimized for vapor injection with use

of a sub-cooler. This boosts refrigeration system’s cooling capacity and efficiency.

• The Summit ZF* K5E models that operate both with liquid injection or vapor injection.

These compressors are qualified for R407A/F, R448A/R449A, R404A and R134a for certain models. For more details on Digital Scroll models please refer to page 58 in the catalogue.

CoreSense™ Diagnostics is now available as an option for the ZF Scroll Summit series (ZF34K5E-ZF54K5E) as well as for Summit Digital ZFD41K5E.

ZF and ZFD Compressor Line-Up

Digital ZFD

ZF with Vapor Injection

ZF with Liquid Injection


• Wide operating envelope with 10°C low condensing temperature to minimize energy consumption

• One model for multiple refrigerants• Light weight and compactness, up to half the weight of

equivalent semi-hermetic compressor• Optional Sound Shell allowing up to 10 dBA sound

attenuation• ZF models with liquid injection - Easy, efficient and reliable injection via Discharge Temperature Control Valve (DTC)• ZF models with enhanced vapor injection - Seasonal efficiencies compared to Emerson’s best semi-hermetic compressors - Improved system capacity and efficiency by 40% and 25% respectively, making them the most efficient compressors on the market. - Possibility to reduce the equipment and component sizes by using smaller compressors


• ZF06 to ZF18 (K4E/KVE): Low Side PS 21 bar(g) / High Side PS 32 bar(g)

• ZF25 to ZF54 (K5E): Low Side PS 22.6 bar(g) / High Side PS 32 bar(g)

• Digital ZFD: Low Side PS 22.6 bar(g) / High Side PS 32 bar(g)

ZF Compressor for Low Temperature Refrigeration With and Without Sound Shell

ZF Copeland Scroll™ Compressor Ranges for Low Temperature RefrigerationUsing R407A/F, R448A/R449A and R404A

Displacement (m3/h)

25 350 15 5030205 10 40 45

51

Con

dens

ing

Tem

pera

ture

°C


20°C Suction Gas Return + Liquid Injection

20K Suction Superheat

10K Suction Superheat20K Superheat + Liquid Injection

Con

dens

ing

Tem

pera

ture

°C




Con

dens

ing

Tem

pera

ture

°C


Con

dens

ing

Tem

pera

ture

°C


0

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10


-35 -25-45

For Liquid Injection


20K Superheat + Liquid Injection


0

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10-35 -25-45

0

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10-35 -25-450

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10-35 -25-45

Operating Envelope R407F

For Vapor Injection

For Liquid InjectionFor Vapor Injection

52

Technical Overview

Models

No

min

al h

p

Dis

pla

cem

ent

(m3 /h

)

Rota

lock

Su

ctio

n (i

nch

)

Rota

lock

D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty (l

)


Net Weight

(kg)

Motor Version/

Code

Maximum Operating

Current (A)

Locked Rotor

Current (A)

Sou

nd

Pre

ssu

re

@1

m -

db

(A)*

**

3 Ph** 3 Ph** 3 Ph**

Models with Liquid Injection

ZF06K4E 2.0 5.9 1 1 / 4 1 1.3 243/245/369 25.4 TFD 5.0 26.0 57.0

ZF08K4E 2.5 7.3 1 1 / 4 1 1.5 243/245/391 27.2 TFD 6.0 32.0 59.0

ZF09K4E 2.8 8.0 1 1 / 4 1 1.5 243/244/391 27.0 TFD 6.0 40.0 62.0

ZF11K4E 3.5 9.9 1 1 / 4 1 1.5 243/244/405 28.0 TFD 7.1 46.0 63.0

ZF13K4E 4.0 11.8 1 1 / 4 1 1.9 246/251/442 38.0 TFD 8.0 51.5 65.0

ZF15K4E 5.0 14.5 1 1 / 4 1 1.9 246/251/442 39.0 TFD 10.0 64.0 65.0

ZF18K4E 6.0 17.1 1 1 / 4 1 1.9 246/251/442 41.0 TFD 12.5 74.0 67.0

ZF Summit Models with Liquid Injection

ZF25K5E 7.5 21.4 1 1 / 4 1 1 / 4 1.9 246/257/452 39.5 TFD 16.0 102.0 70.0

ZF34K5E 10.0 29.1 1 3/ 4 1 1 / 4 3.4 280/280/534 63.1 TFD 25.0 100.0 68.0

ZF41K5E 13.0 35.3 1 3/ 4 1 1 / 4 3.4 280/280/534 63.1 TFD 29.0 118.0 69.0

ZF49K5E 15.0 42.4 1 3/ 4 1 1 / 4 3.4 280/280/552 66.2 TFD 30.0 139.0 72.0

ZF54K5E 17.0 48.3 1 3/ 4 1 1 / 4 3.4 363/312/552 66.2 TFD 31.0 168.0 78.0

Models with Enhanced Vapor Injection

ZF13KVE EVI 4.0 11.7 1 1 / 4 1 1.9 246/251/442 38.0 TFD 9.0 64.0 63.0

ZF18KVE EVI 6.0 17.1 1 1 / 4 1 1.9 246/251/442 39.5 TFD 13.7 74.0 67.0

** 3 Ph: 380-420V/ 50Hz*** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

Operating Envelope R448A/R449AC

onde

nsin

g Te

mpe

ratu

re °C



For individual model details please refer to Select Software.

0

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10-35 -25-45

For Liquid Injection

53

Capacity Data






Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZF06K4E 1.2 1.5 1.9 2.3 2.8 3.5 4.2 ZF06K4E 1.2 1.2 1.2 1.3 1.4 1.4 1.5

ZF08K4E 1.4 1.9 2.4 3.0 3.6 4.4 5.3 ZF08K4E 1.4 1.4 1.5 1.6 1.6 1.7 1.8

ZF09K4E 1.6 2.0 2.6 3.2 3.9 4.8 5.9 ZF09K4E 1.5 1.5 1.6 1.6 1.7 1.8 1.9

ZF11K4E 2.0 2.6 3.2 4.0 4.9 6.0 7.3 ZF11K4E 1.9 1.9 1.9 2.0 2.0 2.2 2.3

ZF13K4E 2.2 2.9 3.6 4.5 5.6 6.8 8.3 ZF13K4E 2.3 2.3 2.4 2.5 2.5 2.6 2.8

ZF15K4E 2.7 3.5 4.4 5.5 6.8 8.4 10.2 ZF15K4E 2.7 2.8 2.9 3.1 3.2 3.4 3.6

ZF18K4E 3.3 4.3 5.4 6.7 8.3 10.2 12.4 ZF18K4E 3.3 3.4 3.5 3.6 3.8 3.9 4.1


ZF13KVE EVI 3.1 4.0 4.9 6.0 7.3 8.7 10.4 ZF13KVE EVI 2.3 2.3 2.4 2.5 2.6 2.7 2.7


ZF Summit Models - with Liquid Injection

ZF25K5E 4.3 5.5 6.9 8.6 10.7 13.2 16.0 ZF25K5E 4.0 4.2 4.5 4.7 4.9 5.2 5.4

ZF34K5E 5.9 7.6 9.6 12.1 15.0 18.3 22.3 ZF34K5E 5.1 5.5 5.9 6.2 6.6 6.9 7.3

ZF41K5E 7.3 9.3 11.7 14.5 17.9 21.8 26.4 ZF41K5E 6.2 6.7 7.1 7.6 8.0 8.4 8.9

ZF49K5E 8.6 11.2 14.1 17.7 21.9 26.8 32.5 ZF49K5E 7.6 8.2 8.7 9.2 9.7 10.2 10.7

ZF54K5E 9.4 12.0 15.0 18.6 22.7 ZF54K5E 7.3 7.9 8.4 9.0 9.6

ZF Summit Models - with Enhanced Vapor Injection

ZF25K5E EVI 6.1 7.7 9.4 11.4 13.5 15.8 18.2 ZF25K5E EVI 4.3 4.4 4.6 4.8 5.0 5.3 5.5

ZF34K5E EVI 8.0 9.9 12.1 14.6 17.4 20.7 24.2 ZF34K5E EVI 5.3 5.5 5.7 5.9 6.1 6.3 6.4

ZF41K5E EVI 10.1 12.6 15.5 18.7 22.1 25.8 29.7 ZF41K5E EVI 6.7 6.9 7.2 7.4 7.6 7.8 8.0

ZF49K5E EVI 12.1 15.1 18.4 22.3 26.8 ZF49K5E EVI 8.0 8.3 8.5 8.8 9.1

Suction Gas Return 20°C / Subcooling 0KPreliminary Data

54

Capacity Data






Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZF06K4E 1.2 1.6 2.0 2.4 3.0 3.6 4.4 ZF06K4E 1.3 1.3 1.3 1.4 1.4 1.5 1.6

ZF08K4E 1.5 2.0 2.5 3.1 3.8 4.6 5.5 ZF08K4E 1.5 1.5 1.6 1.6 1.7 1.8 1.9

ZF09K4E 1.7 2.1 2.7 3.4 4.2 5.1 6.2 ZF09K4E 1.6 1.6 1.6 1.7 1.8 1.9 2.0

ZF11K4E 2.1 2.7 3.4 4.2 5.2 6.3 7.7 ZF11K4E 1.9 2.0 2.0 2.1 2.2 2.3 2.4

ZF13K4E 2.4 3.0 3.8 4.7 5.9 7.2 8.7 ZF13K4E 2.4 2.4 2.5 2.6 2.7 2.8 2.9

ZF15K4E 2.9 3.7 4.7 5.8 7.2 8.8 10.8 ZF15K4E 2.8 3.0 3.1 3.2 3.4 3.5 3.8

ZF18K4E 3.5 4.5 5.7 7.0 8.7 10.7 13.0 ZF18K4E 3.5 3.6 3.7 3.8 4.0 4.1 4.3





ZF25K5E 4.5 5.8 7.3 9.1 11.3 13.8 16.8 ZF25K5E 4.2 4.4 4.7 4.9 5.2 5.4 5.7

ZF34K5E 6.2 8.0 10.1 12.7 15.7 19.3 23.4 ZF34K5E 5.4 5.8 6.1 6.5 6.9 7.3 7.6

ZF41K5E 7.6 9.7 12.3 15.2 18.8 22.9 27.7 ZF41K5E 6.5 7.0 7.5 8.0 8.4 8.9 9.3

ZF49K5E 9.1 11.7 14.8 18.6 23.0 28.1 34.2 ZF49K5E 8.0 8.6 9.1 9.6 10.2 10.7 11.2

ZF54K5E 9.9 12.6 15.8 19.5 23.9 ZF54K5E 7.7 8.2 8.8 9.4 10.1


ZF25K5E EVI 6.4 8.0 9.9 11.9 14.2 16.6 19.1 ZF25K5E EVI 4.5 4.7 4.9 5.1 5.3 5.5 5.8

ZF34K5E EVI 8.3 10.4 12.7 15.4 18.4 21.7 25.4 ZF34K5E EVI 5.6 5.8 6.0 6.2 6.4 6.6 6.8

ZF41K5E EVI 10.6 13.3 16.3 19.6 23.2 27.1 31.2 ZF41K5E EVI 7.0 7.3 7.5 7.7 8.0 8.2 8.4

ZF49K5E EVI 14.1 17.1 20.5 24.5 28.9 ZF49K5E EVI 9.1 9.7 10.3 10.8 11.3


55



R448A/R449A


Power Input (kW)


Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZF06K4E 1.3 1.6 2.0 2.5 3.0 3.6 4.4 ZF06K4E 1.4 1.4 1.4 1.4 1.5 1.5 1.6

ZF08K4E 1.6 2.0 2.6 3.2 3.9 4.7 5.5 ZF08K4E 1.6 1.6 1.7 1.7 1.8 1.9 2.0

ZF09K4E 1.8 2.2 2.8 3.4 4.2 5.1 6.1 ZF09K4E 1.8 1.8 1.8 1.8 1.9 1.9 2.0

ZF11K4E 2.2 2.8 3.5 4.3 5.2 6.3 7.6 ZF11K4E 2.2 2.1 2.1 2.2 2.3 2.4 2.5

ZF13K4E 2.5 3.2 4.0 5.0 6.1 7.4 8.9 ZF13K4E 2.3 2.3 2.4 2.4 2.5 2.6 2.7

ZF15K4E 3.1 3.9 4.9 6.1 7.5 9.1 10.9 ZF15K4E 3.0 3.1 3.1 3.2 3.4 3.5 3.7

ZF18K4E 3.6 4.7 5.9 7.2 8.8 10.7 12.9 ZF18K4E 3.6 3.6 3.6 3.6 3.7 3.9 4.0





ZF25K5E 4.9 6.1 7.6 9.4 11.4 13.8 16.6 ZF25K5E 3.8 3.9 4.1 4.3 4.5 4.8 5.0

ZF34K5E 6.1 7.8 9.8 12.1 14.9 18.1 21.7 ZF34K5E 5.1 5.3 5.4 5.7 6.0 6.3 6.7

ZF41K5E 7.6 9.7 12.1 15.0 18.4 22.5 27.1 ZF41K5E 6.4 6.6 6.9 7.2 7.6 8.0 8.4

ZF49K5E 9.1 11.6 14.6 18.1 22.2 27.0 32.5 ZF49K5E 7.7 7.8 8.0 8.4 8.9 9.4 10.0

ZF54K5E 15.2 18.6 22.7 27.4 33.0 ZF54K5E 10.2 10.5 10.9 1.2 11.6


ZF25K5E EVI 6.2 7.7 9.5 11.4 13.5 15.7 18.1 ZF25K5E EVI 3.9 4.2 4.5 4.8 5.1 5.3 5.5

ZF34K5E EVI 8.1 10.3 12.8 15.6 18.8 22.2 26.2 ZF34K5E EVI 5.6 6.0 6.4 6.8 7.3 7.9 8.5

ZF41K5E EVI 9.9 12.6 15.6 19.0 22.8 27.1 31.9 ZF41K5E EVI 6.8 7.3 7.8 8.4 9.0 9.7 10.4

ZF49K5E EVI 11.9 14.9 18.3 22.2 26.8 ZF49K5E EVI 8.4 8.9 9.4 10.0 10.6


Capacity Data

56

Capacity Data






Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

ZF06K4E 1.4 1.8 2.2 2.6 3.1 3.8 4.5 ZF06K4E 1.4 1.4 1.5 1.5 1.6 1.7 1.8

ZF08K4E 1.8 2.2 2.8 3.4 4.0 4.8 5.7 ZF08K4E 1.6 1.7 1.8 1.9 1.9 2.1 2.2

ZF09K4E 1.9 2.4 3.0 3.6 4.4 5.2 6.3 ZF09K4E 1.8 1.8 1.9 1.9 2.0 2.1 2.2

ZF11K4E 2.5 3.0 3.7 4.5 5.4 6.5 7.8 ZF11K4E 2.2 2.2 2.3 2.4 2.5 2.6 2.7

ZF13K4E 2.8 3.5 4.3 5.3 6.4 7.7 9.1 ZF13K4E 2.3 2.4 2.5 2.6 2.7 2.8 3.0

ZF15K4E 3.4 4.3 5.3 6.4 7.8 9.4 11.2 ZF15K4E 3.0 3.2 3.3 3.5 3.6 3.8 4.1

ZF18K4E 4.0 5.1 6.3 7.6 9.2 11.1 13.2 ZF18K4E 3.6 3.7 3.8 3.9 4.0 4.2 4.4





ZF25K5E 5.1 6.4 7.9 9.6 11.7 14.1 16.8 ZF25K5E 3.8 4.1 4.4 4.6 4.9 5.2 5.5

ZF34K5E 6.8 8.5 10.5 12.8 15.5 18.6 22.2 ZF34K5E 5.1 5.4 5.8 6.1 6.5 6.8 7.2

ZF41K5E 8.4 10.5 13.0 15.8 19.2 23.1 27.7 ZF41K5E 6.4 6.8 7.3 7.7 8.2 8.7 9.1

ZF49K5E 10.1 12.7 15.6 19.1 23.1 27.8 33.2 ZF49K5E 7.7 8.1 8.5 9.0 9.6 10.2 10.9

ZF54K5E 11.2 13.9 17.1 20.8 25.2 ZF54K5E 8.7 9.1 9.7 10.2 10.9


ZF25K5E EVI 7.7 9.3 11.2 13.2 15.3 17.5 19.7 ZF25K5E EVI 4.8 5.1 5.4 5.7 6.0 6.3 5.8

ZF34K5E EVI 10.4 12.5 14.9 17.7 20.8 24.4 28.4 ZF34K5E EVI 6.4 6.8 7.2 7.6 7.9 8.3 6.8

ZF41K5E EVI 12.5 15.1 18.1 21.5 25.5 30.0 35.2 ZF41K5E EVI 7.9 8.3 8.8 9.2 9.7 10.1 8.4

ZF49K5E EVI 14.1 17.1 20.5 24.5 28.9 ZF49K5E EVI 9.1 9.7 10.3 10.8 11.3


For capacity data of ZF28K5E please refer to Select Software.

57

58

ZFD & ZBD Copeland Scroll Digital™ Compressor Range for Mediumand Low Temperature Refrigeration

Copeland Scroll Digital ZBD and ZFD compressors provide stepless continuous capacity modulation in medium and low temperature refrigeration applications.

Based on the unique Copeland Compliant Scroll™ design, the Digital modulation operates on a simple mechanism. Capacity control is achieved by separating the scroll sets axially over a small period of time. It is a simple mechanical solution allowing precise temperature control and system efficiency.

Digital Scroll technology is a simple modulation solution that can easily and quickly be implemented into any existing system design as no other components are required.

Digital Scroll technology provides continuous, stepless modulation from 10% to 100% with no operating envelope restriction. As a result, system pressures and temperatures are tightly controlled. These compressors provide optimum performance for refrigeration units, refrigeration packs, process and agricultural units.

The Digital Scroll range consists of:• ZBD models dedicated to medium temperature applications• ZFD models with vapor injection for low

temperature applications• ZOD model designed for use in R744 (CO2) - see page 66

Digital Scroll Compressor Line-Up

ZFD

ZBD


• Continuous modulation from 10% to 100% ensuring a perfect match of capacity and power to the desired load

• An economical and reliable alternative to variable speed drive

• Precise suction pressure control with associated energy savings

• Food quality is maintained by stable evaporating temperatures in the refrigerated areas

• Longer lasting refrigeration equipment due to fewer compressor cycling

• Quick and easy integration into refrigeration equipment, similar to any other scroll compressor

• Availability of optional sound shell on all models providing up to 10 dBA additional sound attenuation for silent operation

• Availability of Emerson’s series of controllers that operate the Digital Scroll compressor

• Possibility of digital and liquid injection control via optional CoreSense technology

CoreSense™ Diagnostics is now available as an option for the ZBD Scroll Summit series (ZBD76K5E and ZBD114K5E) as well as for ZFD41K5E.

These compressors are qualified for R407A/F/C, R448A/R449A and R404A for all digital models and R134a, R450A and R513 for ZBD only.

Copeland Scroll Digital for Low and Medium Temperature Refrigeration With and Without Sound Shell

Displacement (m3/h)

25 350 15 5030205 10 4540


• Digital ZBD: Low Side PS 22.6 bar(g) / High Side PS 32 bar(g)

• Digital ZFD:


59

Operating Envelope R448A/R449A

For ZBD Digital Models

Operating Envelope R134a

For ZBD Digital Models

Con

dens

ing

Tem

pera

ture

°C


0

10

20

30

40

50

60

-25 -10 0 10

70

-15 -5 5 15


-20-30


Con

dens

ing

Tem

pera

ture

°C


0

10

20

30

40

50

60

-40 -30 -15 -5 5

70

-20 -10 0 10-35 -25-45

Operating Envelope R448A/R449A

For ZFD Digital Models



20K Superheat + Liquid Injection

For individual model details please refer to select software.

Con

dens

ing

Tem

pera

ture

°C


10K Superheat

0

10

20

30

40

50

60

-10 0 10

70

-15 -5 5 15-20

80

20

60

Technical Overview

ModelsN

om

inal

hp

Dis

pla

cem

ent

(m3 /h

)

Rota

lock

Su

ctio

n

(in

ch)

Rota

lock

Dis

char

ge

(in

ch)

Oil

Qu

anti

ty (l

)


Net

wei

gh

t (k

g)

Motor Version/ Code

Maximum Operating Current

(A)


Sou

nd

Pre

ssu

re

@1

m -

db

(A)*

**

1 Ph* 3 Ph** 1 Ph* 3 Ph** 1 Ph* 3 Ph**

Medium Temperature

ZBD21KCE 3.0 8.3 1 1 / 4 1 1.2 243/243/432 30.2 PFJ TFD 16.5 6.7 97.0 40.0 62.0

ZBD29KCE 4.0 11.4 1 1 / 4 1 1.4 245/243/463 32.7 TFD 7.9 48.0 58.0

ZBD38KCE 5.0 14.4 1 1 / 4 1 1.9 246/250/481 38.1 TFD 11.3 64.0 67.0

ZBD45KCE 6.0 17.1 1 1 / 4 1 1.9 241/246/481 39.9 TFD 12.3 74.0 61.0

ZBD57KCE 7.5 21.4 1 1 / 4 1 1 / 4 1.9 246/257/481 43.1 TFD 15.9 102.0 68.0

ZBD76K5E 10.0 28.8 1 3 / 4 1 1 / 4 3.4 299/280/534 61.2 TFD 24.0 118.0 66.0

ZBD114K5E 15.0 43.3 1 3 / 4 1 1 / 4 3.4 299/280/552 68.9 TFD 33.0 174.0 71.0

Low Temperature

ZFD13KVE EVI 4.0 11.7 1 1 / 4 1 1.9 246/250/481 38.6 TFD 9.0 64.0 65.0

ZFD18KVE EVI 6.0 17.1 1 1 / 4 1 1.9 300/299/481 43.1 TFD 13.8 74.0 67.0

ZFD25KVE EVI 7.5 21.4 1 1 / 4 1 1 / 4 1.9 246/250/481 43.1 TFD 16.0 102.0 70.0

ZFD41K5E 10.0 35.3 1 3 / 4 1 1 / 4 3.4 310/280/534 66.2 TFD 20.4 118.0 73.0

ZFD41K5E EVI 13.0 35.3 1 1 / 4 1 3 / 4 3.4 310/280/534 66.2 TFD 20.4 118.0 72.0

* 1ph: 230V/ 50Hz** 3 Ph: 380-420V/ 50Hz** @ 1m: sound pressure level at 1m distance from the compressor, free field condition

For capacity data of ZFD54K5E please refer to select software.

61

Capacity Data





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZBD21KCE 3.4* 4.3 5.2 6.3 ZBD21KCE 1.8* 1.9 1.9 2.0

ZBD29KCE 4.2* 5.5 6.8 8.4 ZBD29KCE 2.6* 2.6 2.6 2.6

ZBD38KCE 5.5* 7.3 9.1 11.2 ZBD38KCE 3.4* 3.4 3.4 3.5

ZBD45KCE 6.1* 8.1 10.1 12.5 ZBD45KCE 3.8* 3.8 3.8 3.9

ZBD57KCE 8.4* 11.1 13.8 17.0 ZBD57KCE 5.2* 5.2 5.3 5.3

ZBD76K5E 8.2* 11.3 14.5 18.4 22.8 ZBD76K5E 7.5* 7.1 7.1 7.3 7.5

ZBD114K5E 10.8* 15.6 20.5 26.3 32.8 ZBD114K5E 10.3* 10.2 10.2 10.3 10.5

Low Temperature with Enhanced Vapor Injection

ZFD13KVE EVI 3.1 4.1 5.2 6.4 7.7 9.2 10.9 ZFD13KVE EVI 2.7 2.8 2.8 2.9 2.9 3.0 3.1



ZFD41K5E 7.3 9.3 11.8 14.6 ZFD41K5E 6.2 6.7 7.2 7.5

ZFD41K5E EVI 10.1 12.6 15.5 18.7 22.1 25.8 23.7 ZFD41K5E EVI 6.7 6.9 7.2 7.4 7.6 7.8 8.0





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZBD21KCE 5.1 6.3 ZBD21KCE 2.0 2.0

ZBD29KCE 5.8* 7.3 8.9 ZBD29KCE 2.9* 2.9 2.9

ZBD38KCE 5.7* 7.1* 8.9 10.8 ZBD38KCE 3.0* 3.3* 3.5 3.6

ZBD45KCE 6.4* 8.4* 10.8 13.2 ZBD45KCE 3.7* 3.9* 4.1 4.3

ZBD57KCE 8.5* 10.8* 13.8 17.0 ZBD57KCE 5.2* 5.2* 5.3 5.3

ZBD76K5E 11.5* 15.2 19.3 23.9 ZBD76K5E 7.5* 7.4 7.6 7.9

ZBD114K5E 15.8* 21.5 27.6 34.4 ZBD114K5E 10.7* 10.7 10.8 11.0





ZFD41K5E 7.3 9.3 11.8 14.6 ZFD41K5E 6.2 6.7 7.2 7.5

ZFD41K5E EVI 23.5 29.8 37.2 45.9 ZFD41K5E KVE 6.4 6.6 6.8 7.1

Suction Gas Return 20°C / Subcooling 0K*Suction Superheat 10K, Subcooling 0KPreliminary Data


62

Capacity Data


R448A/R449A


Power Input (kW)


Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium temperature

ZBD21KCE 2.5* 3.3 4.2 5.2 6.4 ZBD21KCE 2.0* 2.0 2.0 2.0 2.0

ZBD38KCE 3.9* 5.7 7.2 8.9 10.9 ZBD38KCE 3.4* 3.4 3.4 3.4 3.4

ZBD45KCE 4.5* 6.6 8.4 10.5 12.8 ZBD45KCE 3.9* 3.9 3.9 3.9 3.9

ZBD57KCE 6.0* 8.7 11.0 13.6 16.5 ZBD57KCE 4.3* 4.5 4.7 4.9 5.1

ZBD76K5E 15.1 18.8 23.0 ZBD76K5E 6.9 6.9 7.0

ZBD114K5E 21.8 27.7 34.2 ZBD114K5E 10.7 10.8 10.9





ZFD41K5E 7.4 9.4 11.8 14.6 17.9 21.7 26.2 ZFD41K5E 5.4 5.8 6.2 6.8 7.4 8.1 8.9






Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZBD21KCE 3.0 3.7 4.5 5.5 6.6 ZBD21KCE 1.9 1.9 2.0 2.1 2.1

ZBD29KCE 4.1 5.1 6.2 7.4 8.9 ZBD29KCE 2.5 2.6 2.7 2.8 2.8

ZBD38KCE 5.2 6.3 7.7 9.3 11.1 ZBD38KCE 3.1 3.2 3.4 3.5 3.6

ZBD45KCE 6.1 7.5 9.2 11.2 13.4 ZBD45KCE 3.7 3.8 4.0 4.2 4.4

ZBD57KCE 7.9 9.7 11.9 14.3 17.1 ZBD57KCE 4.7 4.9 5.2 5.4 5.5

ZBD76K5E 10.6 13.3 16.4 20.0 23.9 ZBD76K5E 7.5 7.5 7.6 7.7 7.8

ZBD114K5E 14.2 18.6 23.4 28.7 34.7 ZBD114K5E 11.3 11.3 11.3 11.4 11.4






ZFD41K5E 8.6 10.6 13.0 15.7 18.9 22.6 27.0 ZFD41K5E 6.3 6.7 7.1 7.5 7.9 8.4 8.8



63

Capacity Data





Model -35 -30 -25 -20 -15 -10 -5 Model -35 -30 -25 -20 -15 -10 -5

Medium Temperature

ZBD21KCE 2.0* 2.7 3.3 4.0 ZBD21KCE 1.2* 1.3 1.4 1.4

ZBD29KCE 2.5* 3.3 4.2 5.2 ZBD29KCE 1.7* 1.7 1.7 1.7

ZBD38KCE 3.2* 4.4 5.5 6.8 ZBD38KCE 1.9* 2.1 2.2 2.3

ZBD45KCE 3.8* 5.1 6.4 7.9 ZBD45KCE 2.3* 2.4 2.5 2.6

ZBD57KCE 4.7* 6.4 8.1 10.1 ZBD57KCE 3.4* 3.4 3.4 3.5

ZBD76K5E* 6.2 7.9 10.0 12.6 ZBD76K5E 5.3 5.3 5.4 5.4

ZBD114K5E* 8.1 11.1 14.6 18.7 ZBD114K5E 7.4 7.4 7.4 7.5


64

Emerson Coresense™ Diagnostics for Refrigeration Scrolls

The CoreSense Diagnostics module is a breakthrough

innovation for troubleshooting refrigeration system faults and

is installed in the electrical box of all 8 - 17 hp Copeland Scroll K5

refrigeration compressors. By monitoring and analyzing data from the

compressors (via module power, discharge line thermistor and the

current transducer), the CoreSense module accurately detects the

cause of electrical and system related issues and guides the service

technician more quickly and accurately to the root cause of a

problem via flashing LED indicators visible on the CoreSense box.

Supermarket operators hence benefit from increased system

uptime as well as reduced food losses and maintenance costs.

Technical Specification

• Power supply 110-230V AC

• Front end: multi-color LEDs

• Communication protocol: Modbus®RTU

• Bus to system controller: RS485, 3-wire, (+,GND)

• Discharge temperature sensor

• Current sensor

• EEPROM memory

• Alarm reset button

Benefits

• Facilitate predictive maintenance & advanced diagnostics

• Reduce applied system costs

• Manage on-site compressor data

• Reduce maintenance costs

• Increase system uptime / reduce food loss

• Digital and liquid injection control through CoreSense

• Remote trouble shooting

Functions

• Current sensing based diagnostics

• Discharge temperature protection

• Phase monitor protection

• Liquid injection control

• Scroll Digital control

• Open circuit identification

• System trip protection

• Low voltage protection

• Locked rotor protection

• Alarm and operating history

• Asset information

• LED visual indication of alerts

• Modbus communication

Coresense™ Diagnostics for Refrigeration Scrolls

65

66

ZO & ZOD Copeland Scroll™ Compressor Ranges for R744-Subcritical Refrigeration

ZO Copeland Scroll Compressors have been designed for use in R744 (CO2) low temperature refrigeration systems. These compressors are suitable for usage in CO2-subcritical cascade and booster systems.

Increasing environmental concerns about potential direct emissions from HFC-based refrigeration systems into the atmosphere have led to the revival of R744 in the European refrigeration market. Regionally, this trend is reinforced by legislation and taxation schemes which favor the usage of refrigerant R744.

In comparison with HFC refrigerants, the specific properties of R744 require changes in the design of the refrigeration system. The ZO range of Copeland Scroll compressors has been particularly designed to exploit the characteristics of the R744 refrigeration system. Efficiency, reliability and liquid handling advantages of the Copeland Scroll technology equally apply.

The optimized design of ZO compressors effectively address the challenges of R744 systems i.e., high pressure levels, higher mass flow for a given displacement while securing proper lubrication.

The range consists of 6 models including 2 digital models for 10 to 100% continuous cooling capacity modulation.

ZO Compressor for Low Temperature Refrigeration

Operating Envelope R744

Con

dens

ing

Tem

pera

ture

°C


-25

-20

-15

-10

-5

0

5

-55 -45 -25

10

-35 -20



• Optimized for high efficiency in CO2-subcritical cascade and booster systems

• High condensing temperature limit allowing for optimized overall system design

• Compact design minimizing required machine room space• Half the weight of equivalent semi-hermetic compressors• Optional Sound Shell allowing 10 dBA sound attenuation• High bearing reliability and lubrication of all critical parts

under all conditions including liquid slugging• Availability of a digital model offering simple, stepless 10

to 100% capacity modulation


• ZO: Low Side PS 30 bar(g) / High Side PS 52 bar(g)

• Digital ZOD: Low Side PS 30 bar(g) / High Side PS 45 bar(g)

-40 -30-50

For individual model details please refer to Select Software.

ZO and ZOD Compressor Line-up

Cooling Capacity (kW)

Digital ZOD

140

ZO

4 2010 24

Conditions EN12900 R744: Evaporating -35°C, Refrigeration -5°C ,Suction Superheat 10K, subcooling 0K

122 188 226 16

67

Capacity Data

Technical Overview

Condensing Temperature: -10°C

R744Cooling Capacity (kW)

R744Power Input (kW)


Model -45 -40 -35 -30 Model -45 -40 -35 -30

ZO21K5E 3.2 4.1 5.1 6.2 ZO21K5E 1.2 1.2 1.2 1.1

ZO34K3E 4.8 6.2 7.8 9.7 ZO34K3E 1.8 1.8 1.8 1.7

ZO45K3E 7.0 8.8 10.9 13.3 ZO45K3E 2.3 2.3 2.3 2.2

ZO58K3E 8.9 11.2 13.9 17.0 ZO58K3E 3.0 3.0 2.9 2.8

ZO88KCE 13.3 17.0 21.0 25.4 ZO88KCE 4.5 4.5 4.4 4.2

ZO104KCE 15.9 19.7 24.1 29.2 ZO104KCE 4.9 5.0 5.1 5.2

Digital Models

ZOD34K3E 5.1 6.4 7.9 9.7 ZOD34K3E 1.8 1.8 1.8 1.7

ZOD104KCE 15.6 19.1 23.2 27.9 ZOD104KCE 5.0 5.0 5.1 5.3

10 K SuperheatPreliminary Data

ModelsN

om

inal

h

p

Dis

pla

cem

ent

(m3 /h

)

Stu

b S

uct

ion

(i

nch

)

Stu

b D

isch

arg

e (i

nch

)

Oil

Qu

anti

ty

(l)

Len

gth

/W

idth

/hei

gh

t (m

m)

Net

Wei

gh

t (k

g)

Motor Version/ Code

Maximum Operating

Current (A)


Sou

nd

Pre

ssu

re

@1

m -

dB

(A)*

**

3 Ph** 3 Ph** 3 Ph**

ZO21K5E 1.5 2.6 11/4 1 1.0 228/228/388 22.2 TFD 3.6 27 52

ZO34K3E 2 4.1 11/4 1 1.4 242/242/381 30 TFD 5.5 26 54

ZO45K3E 2.5 5.4 11/4 1 1.4 242/242/403 31 TFD 6.2 35 56

ZO58K3E 3.5 6.9 11/4 1 1.4 242/242/417 32.5 TFD 8 48 56

ZO88KCE 5 10.1 11/4 1 1.9 245/249/440 40.3 TFD 11.8 64 60

ZO104KCE 6 11.7 11/4 1 1.9 242/242/461 40 TFD 15 74 61

Digital Models

ZOD34K3E 2 4.07 11/4 1 1.4 242/242/377 30 TFD 5.5 26 55

ZOD104KCE 6 11.7 11/4 1 1.9 241/246/484 41 TFD 15 75 67

68

Sound Shell for Copeland Scroll™ CompressorsQuiet Operation in Sound Critical Environment

Environmental noise has become a serious problem that can

lead to potential contentious situations. It is particularly true for

refrigeration applications where kitchen equipment or compressor

packs are often source of disturbing noise in domestic areas.

Emerson put sound minimisation at the centre of any of its new

compressor development along reliability, seasonal efficiency, size

and weight reduction.

A large portion of equipment acoustic emissions come from

condensers and compressors and in some critical sound sensitive

applications the refrigeration installations need to be acoustically

insulated. Simple solutions are now available to contain sound

emissions. Emerson Climate Technologies has developed a

dedicated Sound Shell for all Copeland Scroll compressors from

2–15 hp. It completely encapsulates the compressor, minimizing

sound leaks while cooling performance remains uncompromised.

Groundbreaking design techniques and materials, derived from

the automotive industry, were utilized to design the Sound Shell.

The use of low pressure reaction injection moulded parts (top cap

cover, terminal box cover and compressor base plate) allows a

10–12 dBA sound attenuation.

It is a significant improvement over conventional sound jackets

available from other suppliers that reduce sound by 3–6 dBA

depending on the application. Particular attention was also paid

in the design stage to ensure ease of mounting in retrofit, service

and new installation situations.

Sound Shell for Copeland Scroll

Small Scroll Summit Scroll Summit Digital Scroll

All Sizes Small Size Medium Size Large Size Small Size Medium Size

Technical Data

Sound Attenuation 10 - 12 dBA

Total weight (kg) 3.4 4.8 4.9 5.1 5.3 5.6

Mantle thickness 25mm

Flammability Conforms to IEC 60335-1 §30

Material

Mantle

Green felt layer (cotton + binder 1.2 kg/m2)

Heavy layer (PVC 4.5 kg/m2)

Closure by use of Velcro fastening - High frequency welded on PVC layer

Base Plate PU SRIM - Low pressure reaction injection moulding technology

Top cap cover

PU SRIM - Low pressure reaction injection moulding technology

Inside insulation green felt and aluminium film

High temperature insulation ring

Terminal box cover PU SRIM - Low pressure reaction injection moulding technology

Technical Overview

2 to 4 hp Scroll1.3 to 2 hp Scroll 4 to 6 hp Scroll 4 to 6 hp ScrollZF with DTC

4 to 6 hp Digital Scroll

Summit Series7 to 15 hp scroll

Summit Series Digital Scroll

Documents

Comfort Applications