Upload
cuecigcom
View
1.314
Download
1
Embed Size (px)
DESCRIPTION
KangerTech T3D user guide. Presented by Cuecig.com this guide includes high quality images of the KangerTech T3D, product highlights, how to fill the kangerTech T3D with eLiquid, and how to successfully replace Kanger T3D coil heads. Available for purchase http://www.cuecig.com/kangertech-t3d-clearomizer/
Citation preview
CUECIG.comElectronic Cigarettes | Advanced Personal Vaporizers | USA eLiquid
1
KangerTech T3D
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 2
The KangerTech T3D 3rd generation enhanced design
KangerTech T3
Released 2012
KangerTech T3S
Released 2013
KangerTech T3D
Released 2014
3
T3D individual parts
Base
Dual Coil head (replaceable)
Polycarbonate eLiquid Tank
Removable Mouth Piece
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 4
KangerTech T3D improvements include
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 5
Replaceable Dual Coil head Same coil head fits multiple
KangerTech units
• Dual Coils allows for a larger surface area of eLiquid to be vaped
• Replaceable coil heads are easy to interchange greatly extending
the usable lifetime of the T3D
• Bottom feed design makes for a smooth Vape
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 6
• Customizable (fits most 510 drip tip sizes)
• Easy to clean
Removable Mouth Piece
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 7
Step 2: Fill tank at an angleStep 1: Remove Base by turning counter clockwise
Avoid getting eLiquid in
center airflow hole
How to fill kangerTech T3D clearomizer with eLiquid
KangerTech T3D | Easy fill design
8
KangerTech T3D | How to fill with eLiquid
Step 3: Place base with coil head back into clearomizer
and thread clockwise. Step 4: Make
sure a tight seal is formed.
How to fill kangerTech T3D clearomizer with eLiquid9
KangerTech T3D | How To replace Coil Heads
Step 1: Remove Base by turning counter clockwise
Step 2: Remove coil head from base by turning counter
clockwise
10
KangerTech T3D | How To replace Coil Heads Step 4: Take new KangerTech
T3D replacement coil.
KangerTech T3D Replacement coils available at Cuecig.com/T3D replacement coils heads
Step 5: Thread replacement coil clockwise until a tight seal
is formed.
11
KangerTech T3D | How To Replace Coil Heads Step 6: Place replacement coil head with attached base into
eLiquid tank.Step 7: Make sure a tight seal is formed between the base
and eLiquid tank
12
KangerTech T3D
Available at www.cuecig.com/kangertech-t3d-clearomizer/ 13
Follow us for Exclusive Sales | Promotions | Product Updates
plus.google.com/+CuecigOfficialSite/
facebook.com/CueCig twitter.com/CueCig
pinterest.com/cuecig/
cuecig.tumblr.com
CueCig.Com
14