Unique Features!Pneumatic roll-to-roll cold laminator 1600mm.Take-Up system included. Speed: 6m/min, silicon roll (heated) 130mm, maximum temperature 60C.Material thickness up to 30mm.
Quick and easy to use, allows you to save workforce and improve productivity. With the laminator Xlam 1600 Cold, increases the quality of your work with better saturation and color performace of your graphics.
High efficiencyNo crease or bubble, guarantees excellent results even at temperatures below 60C. Equipped with footswitch feeding, allows the operator to keep both hands freefor the laminating of widest supports.
Safety warrantyThe photocell sensor prevents you place your hands near roller during the lamination. The emergency shutdown button is clearly visible on the front of the machine.
60 Cmax. temperature
130 mmmain roll
30 mmmax. material thickness
ModelXlam 1600 Cold
Maximum laminating film width1600 mm
Maximum material thickness30 mm
Maximum temperature60 C
Laminating speed0-6 m/min
Main silicon roll diameter130 mm
Main roll movingby air compressor
Warm-up time10-15 minutes
Heating methodInternal with infrared light
Electric consumption1.0 kw/h
Voltage220 v - 50 hz
Temperature/speed controlMicro Control
Dimensions (l x h x p)1910 x 1100 x 630 mm
Packaging dimensions (l x h x p)2130 X 710 x 680 mm
Packaging weight200 kg
Safetyphotocell / CE certification
This brochure can be subject to variations as being revised for which it is to be understood SE&O.
PNEUMaTIC CoLd LaMINaTorXL1600 cold
Pol. Ind. La Baileta c/A num908348 Cabrils (Barcelona) SPAINinfo@emaser.comTelf.: +34 93.750.99.00