TM

Dedicated to Quality

VISHWAS ENTERPRISES

An ISO 9001:2008 Company

Manufacturers of Moulded Rubber Products

Industrial O rings,Gasket,Metal bonded Parts.

JAS-ANZ

T

TM

Dedicated to Quality

Vishwas Enterprises is an ISO 9001:2008 Company who are into

manufacturing of extruded and molded rubber products in silicon, viton, neoprene,natural, nitrile, EPDM, Latex and other synthetic rubbers. We specialize in spongerubber. For the last 15 years ‘VISHWAS ENTERPRISES has dedicated itself inproviding high quality products, on-time delivery and a competitive price to its mostvalued customers. With this commitment we have developed an impressive customerbase.

Achievements

We are an ISO 9001:2008 certified company.

Capabilities

Product Development Analysis.

Product Testing.

Customised Compound Mixing.

Tool, Die, and Mold designing.

In-house R&D and Testing Laboratory.The products we design will save your time, eliminateextra parts, and decrease cost. From your generalspecifications to an on-site analysis of your needs, wewill design and produce a customised product tomeet your operating requirements. We can alsomodify current designs to fit your specificapplications.

Quality Assurance

With our continuous efforts and dedication you areassured of quality products fitting your exactspecifications, on-time delivery, and a quickresponse to your service needs.

Our machines and laboratory equipment's are

calibrated from time to time.

Statistical methods are employed to evaluate andimprove manufacturing methods.

On-site testing to ensure that every product iswithin required specifications.

Dimensional accuracy of models is tested to

ensure accurate production.

“From product development to manufacturing, yoursatisfaction is our highest priority".

Dedicated To QualityWe import branded rubbers and chemicals which are mixedto make a customised compound as per thespecification required. Test slabs are then molded out of thecompound. They are further tested in our in-house lab(certified by DGQA).We test the slabs for the following parameters:

Hardness Elongation at Break Tensile strength Ageing (followed by elongation at break, and tensile

strength tests) Density Adhesion and Corrosion Compression CrystallizationAfter all these tests give satisfying results only then it issent for production.

Products & Specifications

We Manufacture a wide range of Rubber Products, as percustomer’s requirements and specifications.)

O-Rings Gaskets Bushes Packings Hydro-tester Diaphragms Bellows Grommets Latex Rubber

Rubber pads Seals fingers, caps, Liner Washers Hand Gloves,

Anti-vibration Sponge Rubber Cones, Tubingsmountings Products etc.

Wide range of polymers such as Natural , Neoprene, Nitrile(NBR), Silicon, SBR, Viton (fluorocarbon), EPDM rubberPolysulphide etc are used .

CustomisedRubbber Products

Molded/ExtrudedWe produce a wide variety of moulded and extruded rubber parts. Our custom moulded rubber products are manufactured to meetyour most stringent requirements and if your applications require a special formulation, we can make a custom made compoundto satisfy your specific requirements.

The moulds designed by us can be manufactured in common steel (usually for small production lots) or special steels (heattreated, chromed, coated, etc.) for large or medium-sized production lots or for the moulding of corrosive materials.

We also supply rubber extruded parts for gasketing, dust sealing, Spoilers, tubing and O-Ring cord. We alsomanufacture TEFLON Products as per customer’s specification and requirements.

Product Range

O-Rings

Bellows

Gaskets

Packings

Rubber to Metal bonding

We Manufacture wide range of Rubber Products, as per customer’s requirementsand specifications.

O-Rings:We manufacture O-Rings, in a wide range of sizes and polymers, in small or largequantities using stock tooling or with minimal tooling costs.

Our O-Rings are designed using carefully compounded rubber and manufacturedfor high precision tolerances, which are molded in uniform thickness and havedurable joints.

We use polymers like - Viton Silicon Natural Neoprene Nitrile EPDM

Teflonto manufacture O-Rings to meet your specific requirements.

Bellows:We manufacture bellows in different shapes and sizes according to therequirements and specifications of the customer. They are mainly used forautomobile components and industrial machines. Our bellows withstand highpressure, temperature and conform to international standards.

Gaskets & Packings:We manufacture die-cut gaskets and packings from a wide range of sheet materialsfor your sealing and packing requirements. We specialize in making sponge rubbergaskets and packing's.

Grommets:Grommets are available in a standard rubber compound. Special requirements formaterial, hardness, or color are available.

Rubber-to-Metal Bonding:Its a process of molding rubber products that are chemically bonded to metal in thevulcanizing process. We expertly bond all elastomers to metal, for your applicationsrequiring high-strength elastomeric bonds.

Sponge PadsSponge Rubber Pads & Rubber Pads:

Materials:Neoprene, EPDM, Nitrile, Silicone , NBR, SBR & Natural are the materials used tomanufacture Sponge Rubber Pads & Rubber Pads.

Applications: Sealing Weather Stripping Acoustical Control Cushioning Insulating Sheet Packing Support Matting & etc.

Extruded Rubber ProfilesWe Manufacture wide range of Latex Rubber Products as per customer’s requirements andspecifications i.e. - Tubes U Seals Cords Sleeves

Washers:Washers manufactured by us are used for industrial and automobile applications.Polymers used by us for manufacturing washers are - Viton Silicon Natural Neoprene Nitrile EPDM

Teflon

Vishwas Enterprises Vishwas Enterprises Off./Work:Abasaheb Chinchwade Off./Work:Abasaheb Chinchwade

Ind.,Ind.,S No.17/4,Near Hotel S No.17/4,Near Hotel

Ranmala,Walhekar Wadi Ranmala,Walhekar Wadi Road,Chinchwadgaon,Pune -33Road,Chinchwadgaon,Pune -33

Email ID: Email ID: dalvi_vishwas@yahoo.com dalvi_vishwas@yahoo.com Mob.No.-9860276560Mob.No.-9860276560