Upload
triumvirate-environmental
View
857
Download
1
Tags:
Embed Size (px)
Citation preview
1.All lines are muted, use the chat panel for tech
issues and Q&A at webinar’s end.
2.Unanswered questions will be answered via
email after the webinar.
3.Webinar recording and slides will be emailed to
you tomorrow morning.
Share With the Audience
About Ted Dubiel • Over 16 years
peroxide former and high haz management experience
• Head of New England Technical Lab Services Division and company reactives program
Overview• Chemicals may form
explosive peroxides for a variety of reasons becoming shock sensitive
• Can pose a threat to the health and safety
• In most cases not currently managed under a structured program
Overview• Energetic materials do
not age well
• Routine use can expose can accelerate the chemical breakdown
• Changes in the material’s form, color, or state require investigation
The Chemicals
• Ethyl Ether
• Tetrahydrofuran
• Isopropyl Ether
• 1,4 Dioxane
• Sodium Amide
Common Peroxide Formers:
• Five types of stimuli to which an explosive will react:
Electrostatic discharge
Friction
Impact
Heat
Shock
• Safety needs to be increased as energetic materials age
Overview
Regulation/Guidelines• OSHA- General Duty Clause
• NFPA- Peroxide former storage, Fire Department enforcement
• State Department of Environmental Protection - Treatment permits (if necessary)
Regulation/Guidelines• Perform the work off-
hours
• Have a secure location to move to
• Isolate areas that you will pass through with the material
Stabilization of High Hazard Material
• Information is the key:
Commercial products are relatively easy to stabilize because of the availability of information.
MSDS’s usually (but not always) have solubility information on them.
Management of High Hazard Chemicals
• 95% of all remote openings can be avoided.
• They usually result from three things:
Improper storage
No preventative maintenance
Bulk purchasing
Management of High Hazard Chemicals
The Challenge: Develop a standard operating procedure (SOP) that collects the information you want and prevents small bottles from becoming budget shattering events.
High Hazard SOP’s
• Find easy ways to collect information.
• Work with Researchers
• Make tracking/labeling easy
• Give staff a reason why these things must be done (Ex. Fire dept. requires inventory).
• Create management systems that cover the use, maintenance, and purchasing of those materials that could become unstable.
• This will prevent and prohibit activities that create problems.
Management of High Hazard Chemicals
Management of High Hazard Chemicals
• Management systems can include:
Who can purchase such materials
The largest amount that can be purchased
How and where these materials be stored
After what time the chemicals will be disposed
Who will enforce the system and what the penalty will be
Management of Peroxide Forming
Chemicals• Many of the goals of the system can be accomplished with the existing staff.
• Use people at key points in the process of ordering and receiving chemicals.
Purchasing and Receiving - This covers who is using the material and how much.
Chemical Hygiene Plan - This will cover authorized procedures.
Management of High Hazard Chemicals
• Labs should be inspected routinely by lab personnel specifically for peroxide forming chemicals.
• Periodic inspections by EH&S
High Hazard SOP’s• Get them to document
their high hazard materials on an email format or web-based form.
• Create a similar inspection form for high hazard materials that must be submitted on some schedule.
• Look at the forms and give feedback.
High Hazard SOP’s• You can never provide too much
information to the lab. All lab staff know of peroxides in ether. Not
many know what causes this to happen (conditions and use).
• Attempt to get into lab meetings at least monthly with this type of information.
• Let them know the potential safety issues to the individual.
• Large University in Boston Area
Biannual lab evaluations
• Entire campus walk through
Report created
Material evaluated for disposal
• Large Biotech in Boston Area Entered received date upon receipt
into Chemical inventory
Report created showing material at or over 1 year
Annual walk through
Material removed for disposal