Facilities Design Western Canada

The First Summit Dedicated Specifically To Well Site Facilities And Project Management Professionals Working In Western Canada’s Shale Gas And Tight Oil Plays

www.facilit ies-design-shale-2014.com

Register By FridayOctober 17, 2014

SAVE *$400

Insight From Over 20 Facilities Experts From Leading E&P Operators, Including:

Examining Optimal Designs, Equipment Selection Processes And Project Management Strategies Being Used To Deliver Well Site Facilities To Budget In Western Canadian Unconventional Plays:Preventing Time And Cost Overruns In Production, Processing And Gathering Facilities In The Bakken, Duvernay, Cardium, Viking, Montney, Nordegg And Horn River Basin

• Multi-Well Pad Facilities

• Gathering Facilities

• Production Facilities

• Condensate Stabilization

• Water Treatment & Disposal

• Pressurized Tanks

• Gas Processing

• Vapour Recovery

FACILITIES COST FORECASTING & BUDGET CONTROL: Hearing how facilities project managers are accurately forecasting costs, managing suppliers and executing facilities designs within budget and on scheduleMULTI-WELL PAD DESIGN & MODULARIZED CONSTRUCTION: Identifying time and cost saving strategies for designing multi-well pads and outsourcing modules to ensure facilities projects remain on scheduleSTABILIZATION VS. COMPRESSION: Examining how facilities managers are using reservoir characteristic data to determine whether stabilization or compression is more economical for the project and to inform design specificationsGATHERING FACILITIES: Hearing the latest sizing and integrity strategies being used to design and maintain gathering facilities within budgetLABOUR RECRUITMENT STRATEGIES: Sharing strategies for attracting and maintaining workers to help operators and EPCs solve facility engineer labour shortages in Western CanadaWATER MANAGAMENT FACILITIES: Identifying optimal water treatment, flowback reinjection and pipeline designs being used to drive down the costs of water management facilities in Western CanadaREGULATORY UPDATES: Providing detailed clarity on regulations impacting facilities engineers to determine facilities design frameworks - land acquisition, design approvals, safety improvements and greenhouse gas emissionsRETROFITTING & DECOMMISSIONING: Examining brownfield assessment, retrofitting and abatement processes to determine when is most economical and reduce decommissioning costs

Jason Sabid Polymer Technical Specialist Northern Blizzard Resources

Ian Gall Facilities Engineer Talisman Energy

Lawrence Schafers Manager Of Facilities Engineering Vermilion Energy

December 9-10 | Calgary, Canada

Organized By:

It is the first time facilities professionals in the energy sector will

get to network and knowledge-share. It will help them to evaluate their current operations/projects, as they learn about

existing operations

Lead Facilities Engineer, Eagle Ford Operations Carrizo Oil & Gas

www.facilities-design-shale-2014.com (1) 800 721 3915 [email protected]


An excellent opportunity to network with other industry professionals. I enjoy

hearing about the challenges and successes that other operators have experienced.

I think it’s important to never think that you have it all figured out. There’s always room for improvement and sharing learnings at a summit like this is an ideal way to get better

Facilities Engineering Manager

Anadarko Petroleum Corporation

Facilities and process engineers working in unconventional plays throughout Western Canada are currently faced with a multiplicity of budget and project management challenges that, astonishingly, up until this point, have yet to be discussed in a comprehensive facilities-focused forum. As the economics of facilities design and construction become increasingly scrutinized and the breadth of services offered widens, facilities engineers are under increasing pressure to make the right decisions on how to optimize costs and scheduling times for the multimillion and billion dollar projects taking place in tight plays such as the Bakken, Duvernay, Cardium, Viking, Montney, and wider Horn River Basin.

The Facilities Design Western Canada 2014 summit will, for the first time in history, bring together onshore facilities engineering professionals working within key Western Canadian tight and shale plays. Solutions will be provider for project and process engineering challenges that will cover every facet of the construction and design phase. These will be discussed by oil and gas independents and majors, with insights on the following well site facilities:

In addition to this, successful strategies on project management, scheduling, equipment sourcing and budgeting overruns will be delivered to compare best practices between operators.This definitive summit has been carefully designed to ensure maximum takeaway solutions:FIRST FACILITIES-FOCUSED SUMMIT: For the first time, a summit has been created purely for those working in facilities and process engineering in Western Canada. Over two days, presentations will be delivered specifically to help people with these job functions reduce the costs and enhance facilities design in shale gas and tight oil playsSHALE & TIGHT OIL SPECIFIC: Due to the unique challenges posed by shale gas and tight oil plays, the summit will deliver solutions and insights of optimal relevance to those working in the often high-pressured, high-temperature environments of the Bakken, Duvernay, Cardium, Viking, Montney, Nordegg and Horn River BasinCOST REDUCTION FOCUS: As project, facilities and process managers are those ultimately responsible for ensuring the economics of well site facilities, every session has been designed with the recurring end goal of preventing cost overruns and ensuring budgets are met

• Multi-Well Pad Facilities• Gathering Facilities • Production Facilities • Condensate Stabilization

• Water Treatment & Disposal• Pressurized Tanks• Gas Processing• Vapour Recovery

THE FIRST SUMMIT DEDICATED ENTIRELY TO FACILITIES AND PROCESS ENGINEERS IN WESTERN CANADA

BMO Center410 Olympic Way S ECalgary, CanadaABT2G 2W1

Web: http://goo.gl/OlVfLs

Venue Information:

SAVE *$400

PROJECT MANAGEMENT, PROCESSING & GATHERING FACILITIESDay 1Tuesday December 9, 2014

8.30 Chair’s Opening Remarks

FACILITIES COST FORECASTING & BUDGET CONTROLHEARING HOW FACILITIES PROJECT MANAGERS ARE

ACCURATELY FORECASTING COSTS, MANAGING SUPPLIERS AND EXECUTING FACILITIES DESIGNS WITHIN

BUDGET AND ON SCHEDULE

KEYNOTE PANEL: COST FORECASTING

8.40 Evaluating Methods And Metrics Being Used To Accurately Forecast The Costs Of Facilities Projects To Prevent Cost Overruns

•Comparingprojectmanagementtoolsbeingusedtoimprovethereliabilityofcostforecastingtoidentifyoptimalmethodsfortransferaltootherprojects

•Examiningcasestudiesshowingwhichmetricsarebeingfedintotheeconomicmodeltoensureaccuratecostpredictionsonnewfacilitiesprojects

•Understandinghowtoaccountforinflationaryequipmentcostpressuresonlargescaleprojectsintherapidlyevolvingunconventionalmarkettoavoidunexpectedadditionalexpenses

•AnalyzinghowfacilitiesengineersareprojectingcostsintheremoteNorthernregionsofCanada,accountingforlimitedserviceavailability

9.10 Question & Answer Session

COMMON COST PITFALLS & SCHEDULING

9.20 Examining How An Operator Is Prioritizing Events And Anticipating Risks In The Facilities Construction Schedule To Avoid Unexpected Costs

•Assessingtheschedulingmethodsbeingusedbyprojectmanagerstoensureeachcomponentofthedesigncomestogetheronschedule

•Identifyingpotentialhighriskeventsinthefacilitiesexecutionprocesstoenablethedevelopmentofpreventionstrategies

•Evaluatingdecisionmakingprocessesinfluencingthesizeofteamsinvolvedandthespeedwithwhichdecisionsaremadetoestablishausefulbenchmarkformaintainingprojectefficiency

•Capitalvs.OperationalCosts:Evaluatinghowcutstofacilitiescapitalcostsareaffectingtheoperatingcostsofplantstodeterminetheextenttowhichinitialsavingsintheconstructionphaseresultinoverallprojectsavingsorlosses

•Listingkeyareasinwhichunexpectedcostshavebeenincurredonpreviousfacilitiesprojectstoanticipateandpreventrepetition

•Analyzinghowoperatorsarebalancingpeakloadvs.surgecapacityintheirfacilitydesignstominimizecostsparticularlyaroundsandmanagement,skidsandopenchokevalves


10.00 Morning Refreshments in Exhibition Showcase Area

CONTRACTOR STRATEGIES

10.30 Evaluating Best Practices For Forming Alliances With EPCs, Component Vendors And Contractors To Ensure Oil Field Equipment Is Available Within Budget In Time For Production

•Examiningsupplierandcontractstrategiesbeingusedtosecurecost-effectivesuppliesthroughoutthelifeofthefacility

•Understandinghowprojectmanagersaredevelopingmorelong-termcontractsforlongerlifeunconventionalwellstopreventtheprojectbeinghitbyinflationarypressurespartwaythrough


MULTI-WELL PAD DESIGN & MODULARIZED CONSTRUCTION

IDENTIFYING TIME AND COST SAVING STRATEGIES FOR DESIGNING MULTI-WELL PADS AND OUTSOURCING

MODULES TO ENSURE FACILITIES PROJECTS REMAIN ON SCHEDULE

MULTI-WELL PAD DESIGN

11.10 Examining Strategies For Designing And Engineering Multi Well Pads To Boost Economies Of Scale And Reduce Overall Equipment Costs

•Concurrentvs.SequentialConstruction:Comparingconcurrentwithsequentialconstructiontodeterminethemostcost-effectivemulti-wellpadexecutionprocess

•Examiningstrategiesfororganizingincreasedcrewnumbersonsitewhenrunningconcurrentoperationstoensureworkiscompletedefficientlyandstandbycostsareavoided

•Analyzingonsitefacilityseparationandsmall-scalecompressionvs.usingacentralprocessingfacilitytodeterminethemosteffectivewellpaddesignstrategy

•Assessingtheadvantagesofusingscalablewellsitetemplatesformultiplewellpadstoachieveeconomiesofscaletoquantifytheextentofpotentialcostsavings

•Quantifyingthereducedfootprintandsocialbenefitsofrunningmulti-wellpaddesigntohelpdeterminethebusinesscaseforapplyingit


MODULARIZATION & FABRICATION

11.50 Showing How An Operator Is Using Modularization From Both Domestic And International Suppliers To Reduce The Overall Footprint And Cost Of Facilities

•Evaluatingtheadvantagesofproducingmoduleslocallyversusfabricatingabroadandidentifyinghowtoovercomepotentialtransportationissues

•Calculatingtheaccidentandcostrisksassociatedwithshippingmodulesfromoverseastoidentifypotentialthreatstohighvalueequipmentandschedulinginterruptions

•AnalyzingthecosttradeoffbetweenlessexpensivelabourandmaterialsfromAsiawithunpredictableerrorratestoinformabalancedapproachtomodularizationabroad

•Examiningthecertificationprocessforimportingelectricalfittingssuchascables,lighting,junctionboxesandtraysfromabroadtoweighupthetimeandcostpracticalitiesofimport

•Comparingthecostofundertakingqualityvariancetestsonimportedmodulesvs.thecostoftradeandlogisticsdomesticallyinthefieldtodetermineoverallsavingsachievedthroughmodularization


12.30 Networking Lunch in Exhibiting Showcase Area

CONDENSATE STABILIZATION & COMPRESSIONREVEALING THE LATEST CONDENSATE PROCESSING AND HANDLING FACILITIES AND IDENTIFYING CUTTING EDGE

COMPRESSOR DESIGN UPDATES

STABILIZATION VS. COMPRESSION

1.30 Examining How A Facilities Manager Is Using Reservoir Characteristic Data To Determine Whether Stabilization Or Compression Is More Economical For The Project

•Evaluatinghowfacilitiesengineersaretreatingsurfacefluidswithunpredictablecondensate-to-gasratiostoidentifycriteriathatindicatewhetherstabilizationofcompressionismoreeconomical

•Evaluatingthecostofrecoveryunitsforcompressionvs.thecostofincineratingtheflashgasattherequiredcombustiontemperaturestounderstandthemosteconomicalmethodforflashgasdisposal

•Analyzingthetimeandcostdifferencebetweentransportingcondensateviapressurizedbullettanksandtransportingstabilizedcondensateinanopentoptanktohelpoperatorsmakeinformeddecisionsontransportationstrategies


COMPRESSION SPECIFICATIONS

2.10 Evaluating How Facilities Managers Are Designing And Sizing Compression Facilities For Wells With Variable Fluid Volume Predictions, Without Oversizing

•Assessinghowoperatorsarebuildingflexibilityintocompressionfacilitiestocopywithvaryingfluidvolumesandproductiondemands

•Comparingthemaintenanceandcapitalcostofjunctioncompressionwiththeinstallationofindividualwellsitecompressorstodeterminewhichmethodyieldsthemostoperationalvalue

•Identifyingspecifictechniquesforcompressingresidue/flashgasfromcondensatetohelpdeterminethemostcostefficientmethods

•Assessingtheprosandconsofblanketedtanksystemstodeterminethesafestandmosteffectivemodelsforvapourcapture

•Discussingthenegativeeffectofsourgasonscrew

compressorsealstodeterminewhetheritismoreworthwhiletousealternativessuchasthereciprocatingcompressor

•Evaluatingthesuccessofdualwetsealscomparedtoothersealsbetweentheshaftandcompressortodemonstratehowtoachieveconsistentandreliablerunningofmachines


2.50 Afternoon Refreshments In Exhibition Showcase Area

VAPOUR RECOVERY

3.20 Evaluating Vapour Recovery Unit Specifications And Implementation Strategies To Determine A Clear VR Framework For Operators In Western Canada

•IdentifyinglocationsinWesternCanadawherevapourrecoveryunitsare,andwillsoonbe,requiredbyregulatorybodiestoinformfacilityconstructionplans

•Assessingthevolumesandtypesofgasthatvapourrecoveryunitsareprocessingtobenchmarkspecificationsfordesign

•Examiningthemaintenancecostofvapourrecoveryunitstoinformrequisiteoperatorbudgetaccommodations

•Evaluatingtheincomeopportunitythatvapourrecoveryunitsprovideintermsofsellinggastoquantifyrevenuestreamsthatcouldoffsetcosts


GATHERING FACILITIESHEARING THE LATEST SIZING AND INTEGRITY STRATEGIES

BEING USED TO DESIGN AND MAINTAIN GATHERING FACILITIES WITHIN BUDGET

GATHERING FACILITIES EFFICIENCY

4.00 Examining How Facilities Managers Are Using Geological Indicators And The Safest And Cheapest Pipeline Materials To Size And Design Gathering Facilities Within Budget

•Identifyingthequickest,safestandcheapestpipelinematerialsandinstallationtechniquesbeingusedtodesigngatheringsystemsandoptimizetransportationeconomics

•Comparingthecostsofusinggatheringpipelineconnectionswithtruckingandrailfeestodeterminepotentiallong-termsavings

•Examiningcheaperandmorecost-effectivewaysofinstallingpipeingatheringfieldssuchastheuseofopenvs.closetrenchingtoimprovecostefficiency

•Assessinghowbesttointegrategeologicalindicatorsintoausablefacilitydesign

•Examiningnewtechniquesthatwouldhelpprotectagainstslidingslopestressesandavoidingfuturegasoroilpipeflowfailures,leaksandcostlyprojectsclean-upprojects

•Analyzingnon-steelpipeinstallationandoverallcostcomparedwithsteelpipestodeterminethecheapestandmosttimesavinggatheringpipelineforfacilitiesengineers


PIPELINE CORROSION & INTEGRITY

4.40 Viewing The Most Successful Corrosion Mitigation Programs And Pigging Schedules Being Used In Western Canada To Draw Lessons On How To Optimally Maintain Pipeline Integrity

•Identifyingwhichinternalcoatingsandchemicalinhibitorsarebeingusedtoprotectagainstcorrosionandaidflowconditioninginpipingandvessels

•Evaluatinghowoftensmartpigsarerequiredtocollectdataonpipelinewallthickness,thetypesofpipelinetheycanoperateinandtheiroverallcosttodeterminethescaleoftheirvaluetooperatorslookingforaccuratefieldupdates

•Assessinghowoftenwatersamplingisrequiredandonwhattypesofpipelinesitworkstodetermineitseffectivenessasacorrosionmonitoringtechnique

•Assessingtheuseofstressloopsandpipelineheatingpriortoinstallationtomitigatethepotentiallydamagingtemperatureextremesofpipelinesandbuildpipelinestability


5.20 Chair’s Closing Remarks & End Of Day 1

5.30 – 6.30 Networking Drinks Reception In Exhibition Showcase Area


8.50 Chair’s Opening Remarks

WATER MANAGAMENT FACILITIESIDENTIFYING OPTIMAL WATER TREATMENT, FLOWBACK REINJECTION AND PIPELINE DESIGNS BEING USED TO

DRIVE DOWN THE COSTS OF WATER MANAGEMENT FACILITIES IN WESTERN CANADA

WATER TREATMENT FACILITIES

9.40 Evaluating The Latest Water Treatment And Flowback Reinjection Methods Being Used To Optimize Recycling Efficiency To Inform Design Requirements In Western Canada

•Examiningtechniquesforprocessingflowbackfracwaterandproducedwatertoaconditionwhereitcanbere-injectedbackintotheformation

•Identifyingdesignstandardsandcertificationproceduresforpitsdesignedtoholdandproductionfluidstoensureoperatorsknowthecorrectprocedureforbuildingandutilizingthem

•Evaluatingthecontaminationratioatwhichwatercanbere-usedforfraccingtodeterminetreatmentrequirements

•Determininghowoftenwatercanbedesalinatedtocomparethecostsofwaterreinjectioncomparedtofreshwateruse

•Comparingtheefficiencyofutilizingmechanicalvapourcompressioncomparedwithboilingthewatertodeterminecostsavingsbetweenthedesalinationtechniques

•Examiningtheapprovalprocessforwaterdisposalwellsandwheretodisposewastewatertoavoidanyriskofpollutingfreshwatersupplies

•Analyzinghowoperatorsaremitigatinggroundwaterbreachesinponddesignstoensurepondsarenotruinedandgovernmentmitigationspecificationsaremet


10.20 Morning Refreshments in Exhibition Showcase Area

WATER PIPELINE SYSTEMS

10.50 Examining The Very Latest Pipeline Technologies, Testing Techniques And Pipeline Materials Being Used To Prevent Failures In Water Transport Systems

•Assessingthelatestusesofhighdensitypolyethylenepipesforwatertransportationtodeterminetheiradvantagesovertraditionalsteelpiping

•Evaluatinghowtoefficientlytestforleaksandeffectivelyweldhighdensitypolyethylenepipestocommunicatethedifferencesbetweentheseandsteelpipes

•Assessingtechniquestoensurethatpipesdonotgetcloggedbyscaleorbydepositsofasphaltenesornapsonatestoensureoptimalpipeefficiencies

•Examininglicenserequirementsfortemporarysurfacepipelinestodeterminetheprerequisitesforbuildingthemandcomparethedifferentregulationsbetweensurfaceandundergroundpipelines


PRODUCTION FACILITIESUNDERSTANDING HOW FACILITIES MANAGERS ARE

MANAGING SAND AND EOR CHEMICALS DURING PRODUCTION TO MITIGATE COROSSION AND BLOCKING

SAND MANAGEMENT

11.30 Evaluating The Latest And Most Cost-Effective Technologies For Removing Sand In Tanks And Vessels Using To Prevent Corrosion And Blockages

•Examiningeffectivemethodsforde-sandingtanksandvesselstodetermineifnewerprocessesareaffectingtheregularitywithwhichde-sandingneedstotakeplace

•Identifyingspecificsandremovalandmeasurementequipmenttechnologiesandprocessdesignstoestablishthemosteffectivesolutionsforoperatorslookingtoimprovesandcontrolandavoidplugging

•Pinpointingaccuratetechniquesfordetermininghowmuchsandisbeingretrievedorheldupinsidevesselstodecreaseunnecessaryremovaloperationsandreduceoperationscosts

•Understandinghowtoprotecttheintegrityofyourvesselequipmentfromsandthatiscomingupoutofthewelltosaveonlong-termrepaircosts


12.10 Networking Lunch In Exhibiting Showcase Area

EOR FACILITIES

1.10 Analyzing Surface Equipment, Technologies And Chemicals Required For Enhanced Oil Recovery To Inform Pump Selection And System Design

•AssessingthetypesofmaterialsusedfordifferentEORfacilitiestodetermineinwhichprojectsstainlesssteelisneeded

•Evaluatingtheeffectsreservoirtypesandgeologyhaveonchemicalinjectiontodeterminewhichchemicalsneedusedandhowthisaffectssystemdesign

•Analyzingwhichtypeofwaterisusedinconjunctionwithchemicalstodeterminematerialandspecificationsforpipesandpumpseals

•IdentifyinghowoperatorsareamendingtheirfacilitiestobettercleanEORproducedwaterwithpolymercontent

•Assessinghowoperatorsaremitigatingtheextenttowhichpolymercarriessandandsolidintotheoilandwatertreatmentphasestoavoidburnertubefailures,corrosionandplugging

•Assessingtheeffectivenessofheatexchangetreatingcomparedwithusingfiretreaterstodeterminethemostefficientoiltreatmentmethod


REGULATORY UPDATES: AERPROVIDING DETAILED CLARITY ON REGULATIONS

IMPACTING FACILITIES ENGINEERS TO DETERMINE FACILITIES DESIGN FRAMEWORKS: LAND ACQUISITION,

DESIGN APPROVALS, SAFETY IMPROVEMENTS AND GREENHOUSE GAS EMISSIONS

AER REGULATORY UPDATES

1.50 Hearing The Latest Updates From The AER On The Turn Around Times And Processes For Land Acquisition To Factor Timings Into The Construction Schedule

•Evaluatingthelatestrulingsonlandacquisition,approvalofdesign,andenvironmentalapprovaltodeterminethespecificationsthatoperatorsmustadheretowhenrunningprojects

•Providingupdatesonhowlongapprovalsfornewprojectsareexpectedtotakesooperatorscanaccuratelyfactorthisintotheirconstructionschedules

•Examiningstrategiesforearlycommunicationandanadvancedchecklistofnecessaryprerequisitestoconstructiontoexpediteapprovals

•Analyzingthewaysofinformingandtrainingthelabourforcewhowillberesponsibleforimplementingtheregulationstoidentifyopportunitiesforspeedinguptheapprovalprocess


GAS EMISSION REGULATIONS

2.30 Providing The Latest Updates On Regulatory Frameworks For Greenhouse Gas Emissions To Determine Design Implications For Existing And New Facility Infrastructure

•MappingthelatestregulationsongreenhousegasemissionsinB.C.,AlbertaandSaskatchewantoinformdesignchangesandidentifyconsiderationsthatneedaccountedforinthenext3years

•Identifyingcost-effectiveandcompacttechnologiesforreducingNOXemissionstoavoidexpensivere-layoutsandlandacquisitioncosts

•Evaluatingmethodsforreducingexhaustongasturbinestominimizeemissionrates


3.10 Afternoon Refreshments In Exhibition Showcase Area

RETROFITTING AND DECOMMISSIONINGEXAMINING BROWNFIELD ASSESSEMENT, RETROFITTING AND ABATEMENT PROCESSES TO DETERMINE WHEN IS MOST ECONOMICAL AND REDUCE DECOMISSIONING

COSTS

BROWNFIELD RETROFITTING

3.40 Identifying Best Practices For Assessing Brownfield Sites And Ageing Infrastructure To Determine Whether Retrofitting Or Commissioning New Facilities Is Most Economical

•Assessingtheextenttowhichoperatorsarehavingtosignificantlymodifybrownfieldsitestobringthemup-to-datewithregulatorycodes

•Understandingbestpracticemethodsfordeterminingtheconditionofpipingandvesselsforretrofitting

•Assessingthequalityofbrownfieldrecordssuchasolddrawingsandequipmentspecificationsavailabletodeterminetheirusefulnesstooperatorswhenconsideringaretrofit


ABATEMENT EFFICIENCY

4.20 Identifying Comprehensive Abatement And Hazardous Waste Plans Being Developed To Identify Methods For Reducing The Costs And Time Of Decommissioning

•Evaluatingabatementcasestudiesrelatingtoasbestostoquantifythespecifichazards,costsandregulatoryprocessesinvolved

•Determiningthebenefitsofoutsourcingasbestosabatement

•Evaluatingthechallengesaroundcommunityrelationsandthesafetytodeterminethesafestandquickestmethodsoftransportingabatedmaterialstodisposalsitesbytruckandrail

•Assessingstrategiesforsafelyabatingsourgasplantscontainingsulphurandidentifyingspecificlandfillsforthedisposalofsulphur-impactedmetalstomitigateanypotentialhazardsduringabatement

•AssessingthevalueofsalvagingscrapmetalfromfacilityabatementtoselltolocalorU.S.marketsandestimatingresultingsavingsgained


5.00 Chair’s Closing Remarks & End Of Summit

Day 2Wednesday December 10, 2014 LABOUR, WATER TREATMENT & PRODUCTION FACILITIES & REGULATORY UPDATES

I was impressed with the qualifications of the speakers.

This is one of the most organized summits I have attended.

Thank you for the opportunityProduction Engineer

Enerplus




SAVE *$400

With a several billion dollar rush of investment in upstream facilities development projects already underway across Western Canadian unconventional onshore plays, the ONLY facilities engineering-focused summit, Facilities Design Western Canada 2014, offers a unique premier platform for you to engage with key decision makers across E&P operators in Canada. For the very first time, you will be able to outline your technology advances and unveil your best solutions for optimizing production and well site facilities directly to an engaged audience whose sole mission is to improve the equipment selection, lead time, run time, reliability and economics of across their well site projects.

DEMONSTRATE THOUGHT LEADERSHIP: Do your customers know what differentiates you from your competitors? Demonstrate your market knowledge and expertise through a unique thought leadership opportunity to position yourself and company as a true industry leader or pioneer. If you are able to provide solutions and technical insights on topics covered in our agenda we can even offer you a perfectly-timed speaking opportunity enabling you to use targeted, editorially reviewed keynote presentations to your target audience to give your company a competitive edge in the market.

RAISE BRAND AWARENESS AND INCREASE YOUR PROFILE:Any service, product or solution selected by industry leaders when optimizing production, gathering, processing or handling facilities is subject to careful comparative cost-benefit analysis. In a fiercely competitive market, we offer tailored packages to ensure your organization is at the forefront when these decisions are being made to create a clear profile, build credibility and demonstrate market leadership to ensure that you can capitalize on industry investment opportunities. To further cement your leadership position and raise your brand awareness, we can even provide high value branding opportunities before, during and after the summit.

MEET AND NETWORK WITH DECISION MAKERS: Thought leadership, branding and profiling are converted into contracts through extensive face-to-face relationship building. As a dedicated summit for Facilities VPs, Managers and Engineers, this intimate forum allows you to meet specific job titles tasked with designing and selecting the equipment for facilities in one place at one time, giving you the best possible chance of influencing key decision makers.

ACHIEVING YOUR BUSINESS & MARKETING OBJECTIVES AT THE SUMMIT

John Duggan

+ (1) 800 721 [email protected]

To secure your booth or discuss tailor-made sponsorship packages contact

Sponsorship & Exhibition Opportunities

Address For Invoice Purposes

Zip/Postal Code

Country

Payment must be received in full prior to the event.

*Option 1. CREDIT CARD Please charge my * VISA * AMERICAN EXPRESS * MASTERCARD

Expiry date

Security Code / CVV (required)

Signature of card holder

Amount $ CAD

Card number

Name on card

I would like to register the delegate(s) below for the 2 day summitTIGHT OIL & SHALE GAS WELL SITE FACILITIES DESIGN WESTERN CANADA 2014

PYesDetails PLEASE USE CAPITALS - PHOTOCOPY FOR MULTIPLE DELEGATES

Delegate Rates GUESTS ARE RESPONSIBLE FOR THEIR OWN TRAVEL AND ACCOMMODATION ARRANGEMENTS

Payment PLEASE TICK APPROPRIATE BOXES AND COMPLETE DETAILS

How To Finalize Your Registration

*Option 2. INVOICE An invoice containing payment instructions will be sent electronically upon receipt of the completed registration form.

Delegate 1

* Mr * Dr * Miss * Ms * Mrs * Other:

Name

Position

Organization

Email

Telephone

Delegate 2

* Mr * Dr * Miss * Ms * Mrs * Other:

Name

Position

Organization

Email

Telephone

All prices quoted above are inclusive of GST

Now that your details are completed please send your registration form to our

Customer Service Team using one of the following options:

Option 1. Email: [email protected]

Option 2. Fax: (1) 800 714 1359

Enquiries And More Information

Should you have any enquiries or if you would like to request more information

please contact our friendly Customer Service Team on

(1) 800 721 3915 or visit the conference website at

www.facilities-design-shale-2014.com

Super Early Booking Discount Early Booking Discount Standard Rate

Book And Pay By Friday October 17, 2014 Book And Pay By Thursday October 30, 2014 From October 31, 2014

2 Day Summit Pass * $1499 CAD SAVE $400 * $1699 CAD SAVE $200 * $1899 CAD

Add Audio & Video Package * $399 CAD

SAVE UP TO 20%WITH GROUP DISCOUNTSCall for rates: (1) 800 721 3915

Terms & Conditions

The conference is being organized by Canadian Business Conferences, a division of London Business Conferences Ltd, a limited liability company formed under English company law and registered in the UK no. 5090859.Cancellations received 30 days prior to the event taking place will be eligible for a refund less $150 administration fee, after which point no refund will be given. Cancellations must be made in writing, if you are unable to attend you may nominate a colleague to take your place at no additional cost.Receipt of this booking form, inclusive or exclusive of payment constitutes formal agreement to attend and acceptance of the terms and conditions stated.All outstanding fees must be paid within our standard payment period of 7 days. Any outstanding invoices will remain valid should cancellation of attendance be received outside of the aforementioned cancellation period.* If you are claiming the early booking discount this may not be used in conjunction with other discounts

advertised elsewhere. All discount codes and offers must be claimed at the time of registration.Canadian Business Conferences reserves the right to alter or cancel the speakers or program.We would like to keep you informed of other Canadian Business Conferences products and services. This will be carried out in accordance with the Data Protection Act. Please write to the Head of Marketing, Canadian Business Conferences at the address below if you specifically do not want to receive this information.Canadian Business Conferences. Bankers Hall. West Tower, 888. 3rd Street SW. 10th Floor. Calgary. AB. T2P 5C5Canadian Business Conferences will not accept liability for any individual transport delays and in such circumstances the normal cancellation restrictions apply.Canadian Business Conferences is a Division of London Business Conferences Limited.Registered in England No. 5090859 EIN. no: 98-0514924
