Embed Size (px)
Citation preview
Hot Forging Manufacturers in India
Introduction About Forgings
The forging is one type of the manufacturing process. In this manufacturing process involving the shaping of metal using localized compressive forces. According to the temperature there are two types of forgings process. One is Hot Forgings and second is cold Forgings.
What Is The Forging ?
Forging is an established metal shaping process carried out by metal deformation.
In this process metal is heated on very high temperature to achieve consistency.
Once metal is melted down properly, it is filled into dies to gain needed shape.
Forging Temperatures
Usually forging components are manufactured at following three temperatures
✔ Cold forging✔ Warm forging✔ Hot forgings
Cold Forgings Advantages & Disadvantages
Advantages Precision process & Improved parts strength Best surface finish Material conservation
Disadvantages High forming pressures Numerous pre-forming steps required Low Formability
Hot Forgings Advantages & Disadvantages
Advantages Low Forming pressure Can forge complex shapes Best formability
Disadvantages Formation of seale Decreased accurancy
Warm Forgings Advantages & Disadvantages
Advantages Excellent formability Lower Forming pressure High deformation ratio No annealing needed
Disadvantages High tooling costs Tooling must withstand forming pressure
Forgings Process
Cold forging, metals are shaped at room temperature only. In this Process utilized to from products using several dies.
It is suitable for little parts or components usually under 50 IB only.
Warm forging process is carried out at temperature between 800 to 1800 degrees
Hot forging process is carried out at relatively high temperature usually up to 2300 degrees.
Process Chart
Several Forgings Components
Forgings Comparison
Cold forging is relatively inexpensive as compared hot forging techniques manufacturing process. Hot Forging Manufacturers in India prefer hot forging because of its end results.
However, it is not possible to carry out hot forging techniques when you are running with small budget.
During cold forging less heat energy is required and few metal is wasted as compared to hot forging technique.
For Any Further Query, Contact Here UNIQUE FORGINGS (INDIA) PVT. LTD.
601, G.I.D.C Estate, Phase-IV Vitthal Udyognagar-388 121. Dist-Anand (Gujarat) INDIA Phone : 91-2692-235220, 233517 Telefax : 91-2692-236343,233516 E-mail : [email protected] Web : www.uniqueforgings.in
