● Our firm that was founded in 1991 in Zafer industrial area, keeps fabricating every kind of semi trailer for more than 20 years.

● Everytime, higlighting the new developments and innovations, ever year added new products to its product line.

● Main Products:

ADR Tanker,Cement Semi Trailer, Transmixer, Tipper Group (Hadox, Pool Type, Rock type), Dry Goods Carrier, Trailer Group, LPG Tanker Semi Trailer, Tanker Chassis, Tanker Semi Trailer.

● Our firm taking great steps to be one of the Europen brand, certified its quality by ISO 9001-2008 and continued to export.

● Enhancing the fabrication capacity, passing to fabricate semi trailer with automation systems, Nursan builds every kind of semi trailer in 3.Industrial area of Konya, located on 10.000 m2 closed, 10.000 m2 open area.

● TECHNICAL SPECIFICATION

● CHASSIS : It is manufactured by using inert-gas welding machinery from/out of high durable steel as cross sectional “I” Overloadings had been taken into consideration at the durability calculations.

● AXLE: It is manufactured in accordance with the European standards. It has a carrying capacity of 3-12 tons and donated with an automatic adjusting break lever.NURSAN BRAND

● KING-PIN : 2" SIt is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

● TYRE : 6+1 tubeless tyres with the dimensions 385/65 R 22,5

● BRAKE : Brake is designed in accordance with the European standards. WABCO -HALDEXproducts are used as Equipments. Automatic break ratchets, break ventil, break bellow, break lining pads and the axle brakes are equipped with ABS system. There are two replaceable and protected break sockets in front of the trailer.

● AIR SUSPENSION : It consists of of raising and lowering and highness adjusting system; parabolic z trusses and shock absorber elements which limiting overloading axle movement.

● LANDING GEAR : Mechanic gears (feet), which are double revolution and each has a capacity of bearing 25 tons.

● DYE(paint) : All the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes.

● TECHNICAL SPECIFICATION

● CAULDRON : ST-37 A1 quality ,ST 52 or Domex(Optional) V type unloading from bottom working pressure is 2 bar, Test pressure is 3 Unloading time (1350 kg at 1 minutes)

● AXLE : It has a carrying capacity of 3x12 tons and donated with an automatic adjusting break lever.Nursan Brand.(Other brands are optional)

● AIR SUSPENSION : it consists of of raising and lowering and highness adjusting system; parabolic z trusses and shock absorber elements which limiting overloading axle movement.

● COMPRESSOR: NURSAN BRAND,DIESEL OR ELECTRIC

● FRONT AXLE LIFTING : front lifting system can be controlled from inside the cabinet.

● BRAKE : Brake is designed in accordance with the European standards.KNORR products are used as Equipments. Automatic break ratchets, break ventil, break bellows (30cm cylinder), break lining pads (429 x 200 mm.) and the axle brakes are equipped with ABS system. There are two replaceable and protected break sockets in front of the trailer.

● LANDING GEAR :Mechanic gears (feet), which are double revolution and each has a capacity of bearing 24 tons.

● TYRE : 6+1 tubeless tyres with the dimensions 385/65 R 22,5.Bridgestone ,goodYear or Lassa Brand

● KING-PIN : It is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

● DYE (paint) : TAll the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. 2 times painting then dyed 90 degree heat in the owen.As desired, colours can be chosen from the RAL codes.

● TANK CONSTRUCTION : Tank is “MILLENIUM” shape and discharging is from bottom. Tank is built with st37,ST 52 , thickness of 4mm . Working pressure 2 bar and test pressure 3 bar .,2 unit air pressure manometer . 4 “ discharging system and 6 mt special alloy discharge hose and 1 unit regulated to 2.5 bar safety valve nad Upper catwalk and Access ladder is set to trailer

● AXLE : It has a carrying capacity of 3x12 tons and donated with an automatic adjusting break lever.NURSAN BRAND

● AIRCOMPRESSOR : 3 head with 2 cylinder 32 HP diesel-electric NURSAN brand air compressor(OPTIONAL)

● BRAKE SYSTEM : Brake is designed in accordance with the European standards. WABCO-HALDEX,KNORR products are used as Equipments. Manuel break ratchets, break ventil, break bellows (30cm cylinder). There are two replaceable and protected break sockets in front of the trailer.

● KING-PIN : It is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

● ELECTRICAL SYSTEM : We have got 24 V electrical installment which is designed according to EU rules There are stop lambs with many parts which consist of reverse light and fog light on the trailer. There are 2 electrical sockets (24N/24S) and an ABS socket on the front panel.

PAINT : The surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes.

● GUARANTY : 1 year spare parts ( manifactuarer guaranty )

● 1 year or 100.000 km NURSAN manifacture guaranty

● TECHNICAL SPECIFICATION

● CHASSIS : It is manufactured by using inert-gas welding machinery from/out of high durable steel as cross sectional “I” Overloadings had been taken into consideration at the durability calculations.

● AXLE : It has a carrying capacity of 3-12 tons and donated with an automatic adjusting break lever.

● AIR SUSPENSION : It consists of of raising and lowering and highness adjusting system; parabolic z trusses and shock absorber elements which limiting overloading axle movement.

● FRONT AXLE LIFTING : Front lifting system can be controlled from inside the cabinet.

● BRAKE : Brake is designed in accordance with the European standards. WABCO products are used as Equipments. Automatic break ratchets, break ventil, break bellows (30cm cylinder), break lining pads (429 x 200 mm.) and the axle brakes are equipped with ABS system. There are two replaceable and protected break sockets in front of the trailer.

● LANDING GEAR : mechanic gears (feet), which are double revolution and each has a capacity of bearing 24 tons.

● TYRE : 6+1 tubeless tyres with the dimensions 445 /45 R

● KING-PIN : 2" SIt is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

● DYE (paint) : All the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be

● TECHNICAL SPECIFICATION

● CHASSIS : It is manufactured by using inert-gas welding machinery from/out of high durable steel as cross sectional “I” Overloadings had been taken into consideration at the durability calculations.

● AXLE : It is manufactured in accordance with the European standards. It has a carrying capacity of 3-12 tons and donated with an automatic adjusting break lever

● KING-PIN : 2" SIt is made of forged steel (42 Cr Mo 4) which is coherent to 2”SAE/DIN” norms and durable against high level stretching and breakings. It can be replaceable via screw connections.

● Electrical system: It is manufactured in accordance with the European standards

● BRAKE : Brake is designed in accordance with the European standards. WABCO products are used as Equipments. Automatic break ratchets, break ventil, break bellows (30cm cylinder), break lining pads (429 x 200 mm.) and the axle brakes are equipped with ABS system. There are two replaceable and protected break sockets in front of the trailer.

● TYRE : 6+1 tubeless tyres with the dimensions 385/65 R 22,5

● AIR SUSPENSION : it consists of of raising and lowering and highness adjusting system; parabolic z trusses and shock absorber elements which limiting overloading axle movement.

● LANDING GEAR : mechanic gears (feet), which are double revolution and each has a capacity of bearing 25 tons.

● DYE (paint) : All the surfaces are cleaned under high pressure with water and bonder chemical liquid. Then it is dyed with one coat of epoxy die, and a last coat of acrylic die. It is very durable against chemical effectiveness. As desired, colours can be chosen from the RAL codes.