View
488
Download
0
Category
Tags:
Preview:
DESCRIPTION
This session will present some of the more advanced concepts and workflows for Solid Edge Assembly. Items to be discussed are Assembly Mirror capabilities new in ST5, Assembly Structure reuse workflows, new Assembly File Open functionality, and Piping and Frame Enhancements.
Citation preview
#SEU12
Solid Edge Advanced Assembly Design
Art Patrick
Solid Edge Planning
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 2
Art Patrick
Product Manager - Solid Edge Assembly
Areas of Experience:
Assembly, Weldments, Surfacing, Part, Sheet Metal, Draft, Sketch, PMI, Standard Parts and Licensing
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 3
Agenda
Assembly File Open/Place Part Modes
Insert Assembly Copy
Mirror Assembly
Publish Terrain Models
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 4
Assembly File Open/Place Part
Global Options/File Open Settings
Applied during place part
Used whenever ASM is opened
Small/Medium/Large Definitions
Automatic Mode
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 5
Insert Assembly Copy
Allows reuse of assembly structure
Component position defined in the parent ASM
Supports Frames/Pipes/Tubes
Basis for:
Mirror Assembly
Multi-body publish
Assembly Process States
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 6
Insert Assembly Default Mode
Occurrence Include/Exclude
Coordinate System Option
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 7
Insert Assembly Mirror Mode
Mirrors the input Assembly
Creates multiple files as needed
Examines geometry to determine mirror operation
Occurrence Exclude/Mirror/Rotate
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 8
Mirror Assembly
Fully Associative
Mirror in place (New feature)
Mirror entire Assembly (Like Insert Part
Copy)
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 9
Publish Terrain Models
Uses Virtual Component Workflow
STL Part File as input
Cookie cutters terrain facets and creates Solids
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 10
Demonstration
Let’s take a look
© Siemens AG 2012. All Rights Reserved.
Siemens PLM Software Page 11
Advanced Assembly
Questions?
#SEU12
Thank You!
Be sure to check out:
We’re Listening: Assembly Round Table
Recommended