View
2.049
Download
4
Category
Tags:
Preview:
DESCRIPTION
It is for your corrective action for change welding tools.
Citation preview
UNISERVICE 21.LTD03/12/2009
Ultrasonic Welding Setup
About us:
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
• We are welding plastic parts at Ultrasonic welding machines - 40 kHz
• Our company together with your people help create or support yours product from aide to production.
• We have optimal experience of work
• We were certificated by BRANSON
• We are strong observe all QC requirement
• We cooperate with leading expert in plastic
Exchange work tools on BRANSON U.S. machines.1. Preparation of the welded tool.
2. To expose an operating conditions. Look the appendix (Exchange weld setup or in the instruction manual. Chapter-4).
3. To OFF a power supplier.
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
CHANGE ACTUATOR.4. To remove actuator and down a landing payment.
5. To touch actuator. (See Chapter 4: Assembly the Acoustic Stack.)
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
Note: The effort on Manoskop key should be exposed according to the specified data in the working instruction
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
6. To establish the down tool and actuator.
7. To fix a forward cover that actuator.
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
ADJUSTMENT ACTUATOR.8. Turn off air pressure up to 0 (kPa).
9. Expose concerning centering pins, horn and the down tool or from to center them by means of a welded detail.
10. To fix a forward cover and the down tool.
Note: The effort on Manoskop key should be exposed 20 (inc/lb).
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
11. To expose mechanical stop screw.
11. To lift air pressure up to 100 (kPa) and after to on the feed.
12. Turn ON Power Supplier.
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
Installation of parallel between tools.12. To lift air pressure up to 300 (kPa).
13. Turn off DOWN SPEED up to 20 (%).
14. To weaken fixing and adjusting bolts on a Base Mounting Centers.
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
15. To put in the down tool a welded detail.
16. To press button HORN DOWN to lower Horn in a welded detail established in the down tool. Look the Chapter (Adjustment Leveling or in the instruction manual.Chapter 6.11 Using the Horn Down Feature). Press start switches.
17. To tighten adjusting and fixing bolts on a Base Mounting Centers.
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
18. To press button HORN DOWN.
19. To check and to expose operating conditions.
GOOD LUCK!
Our Contact
Country: ISRAEL
City: HOLON
St: SHENKER 27
Tigran Kasparov - 972 (0)504 373708E-mail: tigran35@gmail.com
Igor Nazarov – 972 (0)544 512978E-mail: igornaz@gmail.com
Setup from UNISERVICE 21.LTD 03/12/2009
Tigran Kasparov - 972 (0)504 373708 Igor Nazarov – 972 (0)544 512978E-mail: tigran35@gmail.com E-mail: igornaz@gmail.com
Recommended