View
93
Download
3
Category
Preview:
Citation preview
®
Mold & algae formation due to condensation
1st assessment - December 2015
®
1st assessment - December 2015Water vapour from the air was also dripping due to condensation
®
2nd assessment - March 2016After a repainting job the mold is already reappearing on the wall
®
Removal of the existing vapour sealant coating
Retrofitting process
®
Mold & algae founded behind the skim coat and previous several paint layers
Retrofitting process
®
Application of the BES - CLIMASKIN 1st layer Retrofitting process
®
Application of the BES - CLIMASKIN 2nd layerRetrofitting process
®
Application of the BES - CLIMAFIN layerRetrofitting process
®
The hygrothermal meter device showing NO CONDENSATIOINCondensation problem solved
®
NOVEMBER 2016 - the wall with the BES is no longer affected
Mold & algae problem solved
Recommended