View
74
Download
2
Category
Preview:
Citation preview
Laser Cutting Messer Cutting Systems
North America | Menomonee Falls, Wisconsin
Highest Quality, Best Accuracy
The laser cutting process uses a strong
focused laser beam, produced by a laser
diode. The high energetic laser beam heats
the surface of the material and melts
rapidly a capillary in the material. As a
result, the cut quality and speed are very
high compared with other cutting
technologies.
Fiber Laser Cutting
Fiber Lasers deliver energy through an integrated flexible optical fiber and
have a monolithic, solid state, fiber-to-fiber design that does not require
expensive mirrors to align, maintain or replace.
• Three times more efficient than CO2
lasers.
• Produces virtually dross-free cuts on MS up
to 3/4”, SS up to 1/2”, AL up to 3/8”.
• Precision cutting and marking quality.
• Cost effective
• High speed cutting on the MetalMaster Xcel
and MPC2000 cutting machines.
Plasma/Fiber Laser Combination Cutting
Plasma and fiber laser
combination cutting allows parts
to be processed with either
plasma or fiber laser or both.
When combination cutting the
same piece part, productivity
will increase by allowing critical
internal features to be cut with the
fiber laser and external features to
be cut with the plasma torch
without moving the part to another
piece of equipment. Internal features cut
by fiber laser
External features
cut by plasma
Fiber Laser
Deltae
Plasma
Beveler
Combination plasma and fiber laser
Laser Cutting offered by Messer
• Vertical Cutting Laser
• Plasma/Fiber Laser Combination Cutting
• CO2 Laser Cutting
Vertical Laser Cutting
Using laser technologies for vertical
cutting, our laser machines can provide
the flexibility you need.
With laser we can recommend a variety of tools; such as the CO2-Laser and the
Fiber Laser. Depending on material, thickness, cut quality, and cutting speed, we
can offer you the appropriate laser solutions to fit your needs.
Bevel Cutting Laser
Bevel cutting requires an exact
knowledge of the laser machine and
the cutting processes. Corners, lead-ins
and lead-outs have to be cut with
special sequences.
Bevel cutting also places high demand
on the programming of the cut parts.
Special auxiliary functions are
needed to set the parameters for laser
bevel cutting.
For more information:
Contact Us
Website: http://www.messer-cs.com
Español: http://www.messer-cs.com/mx/us
Phone: 1-262-255-5520
Recommended