Ko win mg training slide 24122012

INTRODUCTION Name : U Win MaungEducation : BE (Civil) 1987

: Specialist diploma in Workplace Safety and Health

Occupation : Resident Technical Officer:Part Time Trainer at BCA

Academy and SCALE Academy in Singapore

Contact No : (65) 9029 8154Email : winmg06@gmail.com

1. To develop the organizations related to Occupational Safety and Health in Myanmar.

2. To implement, review and maintain OSH systems in Myanmar.

3. To Provide Suitable Training courses in Myanmar.

4. To know the some of Training courses for Construction in Singapore.

1. Introduction to occupational safety and health.

2. Organizations related to workplace safety and health in Singapore.

3. Training courses for safety personals.4. Training courses for management level.5. Training Courses for Supervisors.6. Training Courses for Workers .7. Conclusion.

Occupational Safety and Health

Acts, Regulations and Code of Practices

Quality, Safety and Environmental (QSE)

Need knowledge and training with intentional

standards

Safety for everybody in all industrials

Need government enforcement

Ministry Of Manpower (MOM) http://www.mom.gov.sg

• Workplace Safety & Health• Training

WSH Competency StandardsTraining CoursesContinuing Professional Development Program me

Workplace Safety and Health Council (WSHC) http://www.wshc.gov.sg• Promote Safety & Health• Build Industry Capability• WSH Training

Singapore Workforce Skills Qualification (WSQ) http://www.wsq.wda.gov.sg

SOC Requirements & Safety Assessment

Training Materials

Singapore Workforce Development Agency(WDA) http://www.wda.gov.sg• Training Organisation• Becoming a WSQ Provider

Approved Training Organisation (ATO) Adult Education Network Advanced Certificated in Training and

Assessment (ACTA)• Capability Development

To built the capability of WSQ providers in various area

3.1 Certificate in Workplace Safety & Health

(Level A)3.2 Advanced Certificate in Workplace

Safety & Health(Level B)

3.4 Specialist Diploma in Workplace Safety & Health

(Level C)3.5 Graduate Certificate in Workplace

Safety and Health(Level D)

Legal Requirements

Objectives• To provide knowledge and skills to implement WSH control measures and management system

Contents• Hazard identification and risk control• Support WSH legal compliance• Employability skills system• Communication and relationship• Investigate WSH incidents• Promote WSH culture development

Course Duration : 5 month Training Fee : S$ 1530.10

Legal Requirements

Objectives• To familiar with safety legislations, safety management system, accident investigation techniques, hazard identification

Contents

• WSH policy and coordinate with legal requirements • Coordinate WSH management system• Recognize WSH hazards and control measure• Prepare and facilitate classroom training• Communication and relationship management

Course Duration : 126 hrs (6 month) Training Fee : S$ 2172.10

Legal RequirementsContents

•Bridging Module : Apply Basic Mathematics and Science Topics in

WSH*

•Establish and Review WSH Policy and Objectives

•Advise on WSH Legal Compliance Issues

•Establish Measurement and Monitoring of WSH Performance

•Design and Implement Behavioral Safety Program me

•Establish and Manage Incident Investigation and Analysis Processes

•Manage Internal WSH Audit System

• Establish and Review Emergency Preparedness and Response

Plan

• ESS Communication & Relationship Management (Managerial)

• Identify WSH hazards and assess WSH risks

• Control WSH risks

• Manage WSH risks in construction industry

• Manage Workplace Safety & Health System

• Prepare and facilitate classroom training (T&D Framework)

Course Duration : 219 hrs. (7mths)

Training Fee : S$ 4494.00

Legal Requirements

Objectives• To prepare WSH officers and other WSH personal in construction industry to be competent WSH auditors or perform the role of an advisor in WSH matters.

Contents• Manage WSH audit program me•Advise on WSH legal requirements and good practices•Recommend continual improvement to WSH management system

Course Duration : 145 hrs (6 month) Training Fee : S$ 3317.00

4.1 Workplace Safety and Health Management System

4.2 Design for Safety Coordinator

4.3 Safety for Managers

Course Contents

Overview of SS506:A Standards Approach to Managing

OSH

Hazard identification & risk assessment

Policy , objectives & management programs

Legal requirements

Implementation & operation

Checking & corrective action

Management review

Duration : 28 hrs.

Training Fee : S$ 620.60

Target Participants :Designers , Architects , Project Managers , Professional Engineers and Surveyors.Entry Requirements

•University degree recognized by BOA and / or PEB

•Minimum 10 years experience in a consulting firm(s) of

Architectural and /or Civil / Structural or Mechanical & / or

Electrical Engineering

Contents

•To identify safety and health risks associated with construction

project

•Maintain records of safety and health issues

•Coordinate the flow of relevant safety and health information

Course Duration : 14 hrs. Training Fee : S$ 1070.00

Course Content • Understanding Workplace Safety & Health

Legislations, & WSH • Workplace Safety & Health (Construction)

Regulations• General Worksite Safety • Mechanical Material Handling & Scaffold • Overview of Risk Management • Safety & Health Management

Course Duration : 40 hrs. Training Fee : S$ 420.00

Summary of Structure

SECONDARY TRUSSES

RUNWAY TRUSSES…………….. 1450 tons.TRANSVERSE TRUSSES ……… 640 tons.INTERCEPTOR TRUSSES………...480 tons.DIAGONAL TRUSSES…………....1760 tons.SECONDARY TRUSSES………....1630 tons.LOUVER TRUSSES…………….....1050 tons.

TOTAL…...…...6910 tons.

RUNWAY TRUSSES

LOUVERTRUSSES

INTERCEPTOR TRUSSESDIAGONAL

TRUSSES

5.1 Building Construction Supervisors Safety Course(Petrochemical Industry , Shipyard, Tunnelling, Manhole…)

5.2 Formwork Safety Course for Supervisors

5.3 Lifting Supervisor Safety Course

5.4 Metal Scaffold Erection Supervisors Course

5.5 Work-At-Height Course for Supervisors

Course Contents

•Principles of accident prevention

•The workplace safety and health act

•Role and duties of safety supervisors

•Safety in scaffolding

•Safety in demolition, excavation and piling

construction ……

•Fire prevention and control

•Accident investigation techniques

Course Duration : 30 hrs.Training Fee : S$ 283.50

ContentsLegal requirementsGeneral SafetySafety Management System in Lift MaintenanceEnsuring Safe Lifting OperationRoles and responsibilities of lifting supervisorEnsuring Safe Lifting OperationSafety factors and safe working load Safety Practices for lifting machine

Course Duration : (29 + 3) hrs. Training Fee : S$300.00

COURSE CONTENTS

•Use and selection of metal scaffolds

•Practices in the erection and dismantling of the

various systems of metal scaffolding

•The correct use of the various components used in

connection with the erection of metal scaffolding

•Factors affecting the safety of scaffolding

•Course Duration : 10 days (75 hrs.)

•Training Fee : S$819.00

Construction Safety Orientation Course for Workers (Oil/Petrochemical, Manhole,Tunnelling,Metalworking

Explosive Powered Tools

Riggers Course

Signalmen Course

Metal Scaffold Erection Course

Lorry Crane Operator Course

Boom Lift Operator Course

Scissor Lift Operator Course

Folk lift operator

Excavator operator

Tower Crane Operator

Mobile Crane Operators

Crawler crane operators

WSH (Construction) Regulations,R9(1)Mandatory for all construction workersLanguage

Bengali, English, Malay, Mandarin, Myanmar, Tamil, Thai.Contents

• Introduction to WSHA• Identify hazards in construction work• Employment Act • Wellbeing:

Course Duration : 8 hrs ( 1 day)Training Fee : S$ 35 – 37.75

Contents

Module 1 (Theory)

•Principal components and configuration of crawler crane

•Safety devices and indicators

•Introduction to WSHA and subsidiary legislations

•Duties and responsibilities of crane operator

•Interpretation of load chart

•Job site consideration and safe operation of crane

Course Duration : (22+2) hrs.

Training Fee : S$ 321

Contents

Module 2 (Practical)

•Daily & weekly inspection

•Initial crawler crane operations

•Safety in lifting operations

•Hand signals and telecommunication

•Practical lifting operations

Course Duration : (64+8) hrs. Training Fee : S$ 1979.50

ContentsLegal requirementsEnsuring Safe Lifting OperationStandard signalingApplied practiceRoles and responsibilities of signal manEnsuring Safe Lifting OperationSafety factors and safe working load Slinging and Lifting Practices

Course Duration : 23 hrs Training Fee : S$110.00

Constants

•Roles and responsibilities of a rigger

•Ensuring Safe Lifting Operation

•Maintenance of various types of slings

•Safety factors and safe working load

•Inspection Checklist

•Slinging & lifting practices

Course Duration : 15 hrs.

Training Fee : S$ 240.75