View
1.470
Download
4
Category
Tags:
Preview:
DESCRIPTION
Presentation About Designing A Simple Windmill For Generation Of Electricity At A Very Small-scale ... (Download It To Get More Out Of It: Animations Don't Work In Preview) ... !
Citation preview
UTILIZATION OF WIND ENERGY FOR POWER GENERATION
Windmill (Wind turbine Generator)
OBJECTIVE Our objective is to utilize wind energy
(non-conventional energy resource) for the generation of electricity.
A small-scale windmill (wind turbine) can generate electricity if coupled with a generator and exposed to fast blowing winds.
WIND POWER It deals with the conversion of wind
energy into an-other usable form of energy such as electrical energy, mechanical energy (for pumping water, sailing ships, feeding water to crops) etc.
WIND-MILL Windmill is a simple dynamic machine
used directly to convert kinetic energy from fast blowing winds to rotational energy (mainly to turn shaft or any other assembly).
As the wind strikesthe blades, it causes
the blades torotate …
PRINCIPLE OF WINDMILL
When the wind strikesblades of windmill,
kinetic energy of windis utilized by bladesand blades rotate.
Kinetic Energy from Winds
Since blades aredirectly connected to
shaft, so bladesrotate the shaft.
Mechanical Energy from
Shaft
Rotating shaft isconnected to
electricgenerator, whichin turn rotates asthe shaft does.
Electrical Energy from Generator
COMPONENTS OF
WINDMILL Blades Hub Shaft Electric Generator Main Body Tail Tower Base Electric wires Bulb
ASSEMBLY OF WINDMILL
BladesHubShaftGeneratorBodyTailBulbTower ‘n’
Base
Wind striking the blades …
Blades rotate …
Electricity generated …
ESTIMATED COSTS AND
PROPOSED MATERIALS Blades
Proposed material for blades is Aluminum, PVC plastic (Aluminum foil’s price is Rs. 300 per kg, while PVC’s is 500 per kg) or Cedar wood.
Hub Proposed material is ‘Steel’ or Wood (~ Rs.
200). Shaft
Proposed material is ‘PVC’ (~ Rs. 150). Main Body
Proposed material is ‘Aluminum sheets’ or ‘Wooden case’ (~ Rs. 500).
ESTIMATED COSTS AND
PROPOSED MATERIALS Tail
PVC is the most suitable material (~ Rs. 150).
Tower and BasePVC, Steel or Wood may be used here (Rs.
400). Electric motor (as generator)
DC motor, with about 1000 rpm and 12 to 18 volts (~ Rs. 400).
Bulb and Wires2 copper wires and 1 filament bulb (LEDs
are also under consideration) (~Rs. 50). Total cost ranges from Rs. 2000 to 2500.
SPECIFICATIONS & EXPECTATIONS We may use 3 or 4 blades for our
windmill design (of about 18’’ to 24’’ length).
We shall use dc motor as generator rated against 12 to 18 VDC.
We hope to generate from 2 V to 5 V of potential from electric generator.
We hope to get minimum of 100 mA of current from generator.
If we wouldn’t be able to achieve expected results, we may increase the size of blades or rating of generator.
ADVANTAGES OF
WINDMILL Wind Energy (fuel for windmill
generator) is renewable, so it will never run out.
Windmill doesn’t produce any poisonous gases, smoke, fumes, etc. as it doesn’t involve any burning process. So, it’s clean.
It’s a very cheap way to generate electricity from.
Windmills have very low maintenance costs as compared to those of other power generation plants.
LIMITATIONS OF
WINDMILLS Windmills cause a lot of noise, so a
windmill farm may become bothersome for people living nearby.
Installation costs for windmills are very high, and its designing requires very high technical skill and knowledge.
Since wind is unpredictable, so we may not get electricity all the time.
Efficiencies for these wind turbines are very low.
WOULD YOU LIKE TO ASK US SOMETHING?
THANK YOUHafiz Muhammad Ashraf … 08-
ME-21Sheikh Haris Zia … 08-ME-39Ibrahim Azhar … 08-ME-53
Muhammad Haris … 08-ME-69Ahmed Hilal Khan … 08-ME-125
Recommended