Development Of Jacquard Design Through Computer Aided Design Cad Weaving

Development of Jacquard Design through Computer Aided Design

Under the Guidance: Mrs. Rashmi Thakur

By: Akshay Katyal Sandeep Mittal Sachin Kumar

Panipat Institute of Engineering and Technology, Samalkha

To prepare a Jacquard Weave of the College Logo through CAD.

To prepare a Jacquard Weave of the Front View of College and College Reception through CAD.

Project Objective

1 •Search of Literature related to CAD

2 •Photographs taken by Digital Camera

3 •Editing of Photographs and Logo through CAD

4 •Development of College Logo on CAD

5 •Weaving of design(Logo) on loom in college

Plan of WorkS

even

th S

emes

ter

6 •Visit to Om Overseas for Hook arrangement specificat ions

7 • Development of Final Design (Front View and Reception)

8 •Weaving of final Design on Electronic Jacquard in Om Overseas

9 •Preparation of Project Report

10 •Final Presentation

Eig

hth

Sem

este

r

When the products in pre-manufacturing stage are designed with the help of computer-based tools, it is termed as CAD Computer Aided Design (CAD)

It is a form of design in which people work with computers to create ideas, models, and prototypes.

Computer Aided Designing (CAD)

Textile Design System

Sketch Pad System

Embroidery System

Texture Mapping

Types of CAD System

# Book: Winired Aldrich, “CAD in Clothing and Textiles”, Blackwell Science

Modules of CAD in Weaving

Edit Module

Dobby Module

Jacquard

Module

ColourLibrary

Weave Library

Yarn Library

# Ref. K. Mathur, A. Donaldson, D. Hinks and A.M. Seyam, RJTA, Vol. 9,No. 4, Nov 2005.

Speed & Ease of designing a pattern

Repeatability of the designs

Database of Drawing Aids

Better Visualisation of drawings

Quick Design Analysis

Increased Accuracy

Lower production Cost

Less errors in production

Advantages of CAD in Weaving

Arahne is a software company, specialized in developing CAD/CAM systems for weaving.

It was established in 1992 The company is situated in SloveniaThe software works on Linux (not

Windows).

Software: Arahne

Modules of Arahne

ArahPaint ArahWeave

ArahDrape

Interfacing CAD with Electronic Jacquard

• The CAD programming systems greatly simplify the procedures involved both in the production and processing of Jacquard Designs.

• The Cardboard or Pattern Cards are replaced by Magnetic Tapes for the Electronic Machines.

• The date required for Shed formation is processed on one of the available programming systems, which provides CAD and processing of all weave and pattern data.

Book: Sabit Adanur, “Handbook of Weaving”, Technomic Publication, 2001.

1. The design under consideration is scanned and saved in the library of the system.

2. ArahPaint Module is selected and editing of the image is done if required.

3. The edited image is browsed from library of images to ArahWeave Module in the Jacquard Conversion mode.

4. This mode gives the information about total no. of colour used for the design. Here weave for particular region of colour has to been assigned by playing with the various colour of warp and weft interlacement as taken beforehand.

Development of Design on ArahWeave

# Ref: Manual of ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Process of Development of Jacquard Design on ArahWeave

Designs Developed

PIET LOGO

References

1. Manual of ArahWeave2. Manual of ArahPaint4. Dana Kremenakova, Iva Mertova; IJFTR, Vol. 33,

December2008, 400-404.3. K. Mathur, A. Donaldson, D. Hinks and A.M. Seyam, RJTA, Vol.

9,No. 4, Nov 2005.4. www.angeifire.com/electronic/handloomproject/

Project_Name.html5. Manual of TEX-Style/Jac-Art, Developed by M/s Wonder

Weaves Systems6. Ashis Mitra, CAD/CAM technology offers no-limit solution for

textile designing and manufacturing, Fibre to Fashion.7. Book: Winifred Aldrich, CAD in Clothing and Textiles, Blackwell

Science.8. Manual of TEX-Style/Jac-Art, Developed by M/s Wonder

Weaves Systems9. Book: Sabit Adanur, “Handbook of Weaving”, Technomic

Publication, 2001.