View
220
Download
2
Category
Preview:
Citation preview
Vogt Valves
Catalog and ApplicationManual
Vogt ValvesVVACT0000-01(Replaces VV200)
Forged Steel Valves and Fittings
Page
Index by Valve Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - vTable of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3Description of No. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Gate Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 43Nuclear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Sour Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Globe Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 87Auxiliary Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Check Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 - 111Engineering Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 - 123Fittings & Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 - 132Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Glossary, Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . 134 - 136Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 137 - 139Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 - 143Standards, Data, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . 144 - 149
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES150 A105 Bolted Flanged OS&Y 353
Butt Weld OS&Y BW353THd/SW OS&Y See Class 800
A182 F316/F316 L Bolted Flanged OS&Y 358A350 LF2 Bolted Flanged OS&Y 32353
300 A105 Bolted Flanged OS&Y 363Butt Weld OS&Y BW363Thd/SW OS&Y See Class 800
A182 F316/F316 L Bolted Flanged OS&Y 368A350 LF2 Bolted Flanged OS&Y 32363
600 A105 Bolted Flanged OS&Y 373, 13373, 11403Butt Weld OS&Y BW373Thd/SW OS&Y See Class 800
A182 F316/F316 L Bolted Flanged OS&Y 378A350 LF2 Bolted Flanged OS&Y 32373
Threaded OS&Y 12111, 13111, 11103ISS 12161
Socket Weld OS&Y SW12111, SW13111, SW11103Bolted ISS SW12161
Male Thd x Fem Thd OS&Y TT12111Male Soc x Fem Thd OS&Y ST 12111Male Cpt x Fem Thd OS&Y CT12111
A105 Threaded OS&Y 2801, 2801BISS 2811
Socket Weld OS&Y SW2801, SW2801B Weld ISS SW2811
Male Thd x Fem Thd OS&Y TT2801ISS TT2811
Male Soc x Fem Thd OS&Y ST2801Male Cpt x Fem Thd OS&Y CT 2801, CT 2901
Union Threaded ISS 59851800 Socket Weld ISS SW59851
A350 LF2 Bolted Threaded OS&Y 32111Socket Weld OS&Y SW32111
Bolted Threaded OS&Y 12401, 13401Socket Weld OS&Y SW12401, SW13401Threaded OS&Y 2831Socket Weld OS&Y SW2831
A182 F3/F316L Weld Male Thd x Fem Thd OS&Y TT2831Male Soc x Fem Thd OS&Y ST2831Male Cpt x Fem Thd OS&Y CT2831
Union Threaded ISS 59951Socket Weld ISS SW59951
A182 F316H Bolted Threaded OS&Y 82401Socket Weld OS&Y SW82401
A182 F5 Bolted Threaded OS&Y 12421Socket Weld OS&Y SW12421
A182 F9 Bolted Threaded OS&Y 12921Socket Weld OS&Y SW12921
i
Gate Valve Index
ii
Globe Valve Index
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES800 (cont.) A182 F11, CL2 Bolted Threaded OS&Y 12321
Socket Weld OS&Y SW12321A182 F22 CL 3 Bolted Threaded OS&Y 12521
Socket Weld OS&Y SW12521Threaded OS&Y 15111, 16111, 1033, 1043
Bolted Socket Weld OS&Y SW15111, SW16111, SW1043, SW1033A105 Flanged OS&Y 15373, 11603, 11683
Weld Threaded OS&Y 15801Socket Weld OS&Y SW15801Male Cpt x Fem Thd OS&Y ST15801
1500 A350 LF2 Bolted Threaded OS&Y 35111Socket Weld OS&Y SW35111
A182 F316/F316L Bolted Threaded OS&Y 15401Socket Weld OS&Y SW15401
Weld Threaded OS&Y 15831Socket Weld OS&Y SW15831
A182 F11, CL.2 Bolted Threaded OS&Y 15321Socket Weld OS&Y SW15321
A105 Welded Threaded OS&Y 66703Socket Weld OS&Y SW66703
2500 A182 F11, CL2 Welded Threaded OS&Y 66713Socket Weld OS&Y SW66713
A182 F22, CL.3 Welded Socket Weld OS&Y SW66773
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES150 A105 Bolted Flanged OS&Y 473, 473B
Bolted THd/SW OS&Y See Class 800A350 LF2 Bolted Flanged OS&Y 32473
300 A105 Bolted Flanged OS&Y 483, 483B, 22483CLBolted Thd/SW OS&Y See Class 800
A350 LF2 Bolted Flanged OS&Y 32483600 A105 Bolted Flanged OS&Y 493, 493B, 22493CL,
22493MT, 10403Bolted Thd/SW OS&Y See Class 800
A350 LF2 Bolted Flanged OS&Y 32493800 OS&Y 12141, 12141B, 13141, 22141
Threaded 12443, 22461, 10103, 1971ISS 12181
SW12141, 12141B, SW13141Bolted Socket Weld OS&Y SW22141, SW12443, SW22461
SW10103, SW1971ISS SW12181
A105 Male Thd x Fem Thd OS&Y TT12141Male Soc x Fem Thd OS&Y ST 12141Male Cpt x Fem Thd OS&Y CT12141
Weld Threaded OS&Y 2821, 810Socket Weld OS&Y SW2821, SW810
Gate Valve Index (cont.)
iii
Globe Valve Index (cont.)
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES800 (cont.) Threaded OS&Y 801
Union ISS 851Socket Weld OS&Y SW801
ISS SW851A182 F316/F316L Bolted Threaded OS&Y 12501
Socket Weld OS&Y SW12501A182 F316H Bolted Threaded OS&Y 82501
Socket Weld OS&Y SW82501Bolted Socket Weld OS&Y SW12351
A182 F11, CL. 2 Weld Threaded OS&Y 811Socket Weld OS&Y SW811
Bolted Socket Weld OS&Y 12551A182 F22, CL. 3 Weld Threaded OS&Y 822
Socket Weld OS&Y SW822A350 LF2 Bolted Threaded OS&Y 32141
Socket Weld OS&Y SW32141Bolted Threaded OS&Y 15141, 15443, 1003, 1023
Socket Weld OS&Y SW15141, SW15443, SW1003, SW1023
A105 Flanged OS&Y 15493, 10603, 10683Weld Threaded OS&Y 15821
1500 Socket Weld OS&Y SW15821A182 F316/F316L Bolted Threaded OS&Y 15501
Socket Weld OS&Y SW15501A182 F11, CL2 Bolted Threaded OS&Y 15351
Socket Weld OS&Y SW15351A105 Weld Threaded OS&Y 1510
Socket Weld OS&Y SW15101690 A182 F11, CL2 Weld Threaded OS&Y 1511
Socket Weld OS&Y SW1511,A182 F22, CL. 3 Weld Threaded OS&Y 1522
Socket Weld OS&Y SW1522A105 Weld Threaded OS&Y 66723
Socket Weld OS&Y SW667232500 A182 F11, CL2 Weld Threaded OS&Y 66733
Socket Weld OS&Y SW66733A182 F22, CL. 3 Weld Threaded OS&Y 66793
Socket Weld OS&Y SW66793A105 Weld Threaded OS&Y 2510
Socket Weld OS&Y SW25102680 A182 F11, CL2 Weld Threaded OS&Y 2511
Socket Weld OS&Y SW2511A182 F22, CL. 3 Weld Threaded OS&Y 2522
Socket Weld OS&Y SW2522
iv
Check Valve IndexPress. Class Material Bonnet Joint End Connection Type SERIES150 A105 Bolted Flanged Piston 573
Bolted Thd/SW Piston See Class 800Bolted Flanged Swing S 673
A350 LF2 Bolted Flanged Piston 32573300 A105 Bolted Flanged Piston 583
Bolted Thd/Sw Piston See Class 800Bolted Flanged Swing S 683
A350 LF2 Bolted Flanged Piston 32583600 A105 Bolted Flanged Piston 593
Bolted Thd/SW Piston See Class 800Bolted Flanged Swing S 693
A350 LF2 Bolted Flanged Piston 32593Piston 701,701ZL,710,13701
Threaded Ball B701,B710Swing 4835, S701Piston SW701,SW710,SW13701
Socket Weld Ball SWB701, SWB710A105 Swing SW4835, SWS701
800 No Threaded Swing S74Socket Weld Swing SWS74Threaded Piston 9091
Union Ball B9091, 54853Socket Weld Piston SW9091
Ball SWB9091, SW5483Threaded Piston 718Socket Weld Piston SW718Threaded Swing S718
A182 F316/F316L Bolted Socket Weld Swing SWS718Threaded Ball B718Socket Weld Ball SWB718
Union Threaded Ball 54863A182 F316H Bolted Threaded piston 82718
Socket Weld Piston SW82718A350 LF2 Bolted Threaded Piston 32701
Socket Weld Piston SW32701Threaded Piston 15701
Ball B157011500 A105 Bolted Socket Weld Piston SW15701
Ball SWB15701Flanged Piston 15593
A105 Weld Threaded Piston 16101690 Socket Weld Piston SW1610
A182 F22, CL. 3 Weld Threaded Piston 1622Socket Weld Piston SW1622
A105 Weld Threaded Piston 2610Socket Weld Piston SW2610
2680 A182 F11, CL. 2 Weld Threaded Piston 2611Socket Weld Piston SW2611
A182 F22, CL. 3 Weld Threaded Piston 2622Socket Weld Piston SW2622
v
Meter Globe Valve Index
Hydraulic Check Valve Index
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES3000 A105 Screw Threaded ISS 1331T, 1881T, 2891T
Socket Weld ISS SW1871T, SW1331T, SW2891T4000 A105 Union Threaded ISS 54831T
Socket Weld ISS SW54381T5000 A105 Screw Threaded ISS 9871T, 9841T
Socket Weld ISS SW9871T, SW9841TA182 F316/F316L Screw Threaded ISS 98717T, 9841T
Socket Weld ISS SW9871T, SW9841TA182 F316/F316L Screw Threaded ISS 9871T, 9841T
Socket Weld ISS SW9871T, SW9841TA182 F316/F316L Screw Threaded ISS 9821T
Socket Weld ISS SW9821T6000 A105 Screw Threaded ISS 3991T
Socket Weld ISS SW3991T
Press. Class Material Bonnet Joint End Connection Bonnet Type SERIES3000 A105 Screw Threaded Piston 1551, 2191
Socket Weld Piston SW1551, SW2191Threaded Ball B1551Socket Weld Ball SWB1551
6000 A105 Screw Threaded Piston 4881Socket Weld Piston SW4881
vi
In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigerationsystems that made artificial ice. This business, plus Vogt’s fledgling boiler business created aninternal need for quality valves that initiated Vogt’s early entry into the valve manufacturingbusiness. The early reputation of Vogt’s quality valves and the rapidly growing petroleumprocessing industry created an outside demand that would firmly establish Vogt in the massproduction of high quality forged steel valves.
For more than 100 years, Vogt’s leadership has been evident in the production of forged steelfittings, gate, globe, angle and check valves in most popular materials, trims and bonnetconfigurations.
Today, Vogt Valves supports a worldwide network of distributors with access to the world’slargest capability for the manufacturing of forged steel valves and fittings.
Vogt Valves, Sulphur Springs, TX
Vogt Valves – A History in the Making
1
Page Nos.
Index by Valve Type ............................................................................................ i-vIndex .....................................................................................................................2-3Description of No. System .................................................................................... 4Gate Valves.........................................................................................................5-43Nuclear ...................................................................................................................44Sour Service...........................................................................................................45Globe Valves .................................................................................................... 46-87Check Valves ...................................................................................................89-111Engineering Tables ........................................................................................112-123Fittings & Unions...........................................................................................124-132Spare Parts ..................................................................................................140-143
Abbreviations & Terms Used in the Valve & Fitting Industry, Glossary of............134
ASTM Material Specs. Cross Reference ............................................................117
Auxiliary Operators.................................................................................................88
Care & Maintenance of Vogt Valves .............................................................137-139
Conversions: Weight, Pressure & Temperature ..........................................148-149
Cv Factors ....................................................................................................122-123
Page Nos.
Cv Formulas..................................................................................................120-121
Dimensional Data for Standard & Schedule Pipe ........................................145-146
Materials (Forging) ...............................................................................................118Materials (Valve Trim)...........................................................................................119Materials (General Use) .......................................................................................119
Packaging Data for Fittings .................................................................................126
Pressure-Temperature Service Ratings.........................................................112-115
Replacement Parts...............................................................................................138
Series Number Index ............................................................................................2-3
Standards for Valve & Fitting Industry ..........................................................135-136
Limited Warranty ..................................................................................................133
Thread & Socket Weld Standards........................................................................144
Valve Packing Materials .......................................................................................116
Catalog Sections
PAGE NOS.Check Valves Gate Valves Globe Valves
Alkylation (HF) 93, 97 7, 9, 11, 12, 14, 21 53, 54, 55, 59ASTM A350, Gr. LF2 ( to -50°F) 90-92, 99 6-8, 18, 38, 43 47-49, 55API-600 Wall Thicknesses 94 10, 33, 35, 36 51, 71, 72, 73Extended Body 25-29, 41 62Bellowseal 13, 20, 22, 47-49, 52Chlorine 50, 61Cryogenic (to -325°F) F316, F316L 17 57 Flow Control 63, 64, 76Hydraulic 109-111 83-87(NACE MR-01-75) Sour Service * 45 45 45Nuclear 44 44 44Y-Pattern 107, 108 68, 78, 80-82Zero Leakage 100
* GIobe, Angle and Check Valves can be provided with appropriate trim materials for sour service. Valve series with MB6, MB8 and MBS suffixes meet NACE. See pages 4 and 45 for explanation.
Service Application
Table of Contents
2
S 74..........................96SWS 74 .........................96
229...............126-128SW 229 .......126,127,130
243...............126-128 SW 243 .......126,127,130
259...............126-128273...............126-128
353..........................6BW 353..........................6
353F8M .................6BW 363F8M...................7
353FHF...................6353MB8 ..................6353MM....................6353R .....................20
BW 353R .....................20353T........................6358..........................6363..........................7
BW 363..........................7363FHF...................7363MB8 ..................7363MM ...................7
BW 363MM....................7363R .....................20
BW 363R .....................20368..........................7373 .........................8
BW 373..........................8373F8M...................8
BW 373F8M...................8373FHF...................8373MB8 ..................8373MM....................8
BW 373MM....................8373R .....................20
BW 373R .....................20378..........................8
473........................47473B .....................47473F8M.................47473MB8 ................47473MM..................47483........................48483B .....................48483F8M.................48483MB8 ................48483MM..................48493........................49493B .....................49493F8M.................49493MB8 ................49493MM..................49
SW 503...............126,130573........................90573F8M.................90
573MB8 ................90573MBS................90573MM..................90583........................91583F8M.................91583MB8 ................91583MBS................91583MM..................91593........................92593F8M.................92593MB8 ................92593MBS................92593MM..................92
SW 623...............126,130S 673 .....................95AS 683 .....................95BS 693 .....................95C
701......................100S 701........................95
SW 701......................100SWS 701........................95
701F8M...............100SW 701F8M...............100
701MB8 ..............100SW 701MB8 ..............100
701MBS..............100SW 701MBS..............100
701MM................100SW 701MM................100
701ZLB ...............100701ZLE ...............100701ZLN...............100701ZLV ...............100
B 701........................97SWB 701........................97SWB 701HF6.................97SWB 701HF7 .............. 97
710........................98B 710........................98
SW 710........................98SWB 710........................98
710FHF.................98SW 710FHF.................98
718........................99B 718........................97S 718........................95
SW 718........................99SWB 718........................97SWS 718........................95
718T......................99SW 718T......................99
801........................69SW 801........................69
810........................68SW 810........................68
811 ........................68SW 811 ........................68
822........................68SW 822........................68
851........................70SW 851........................70
1003......................73SW 1003......................73
1023......................73SW 1023......................73
1033......................36SW 1033......................36
1043......................36SW 1043......................36
1160.............126-128SW 1160 ......126,127,130
SWT 1160 ......126,128,1301189.............126-128
1211.............126-128SW 1211 ......126,127,130
SWT 1211 ......126,128,1301260.............126-1281280.............126-1281299.............126,127
SW 1299......126-128,130
1331T....................83SW 1331T....................83
1399.............126-128SW 1399......126,127,130
1510......................78R 1510......................80
SW 1510......................78SWR 1510......................80
1511 ......................78R 1511 ......................80
SW 1511 ......................78SWR 1511 ......................80
1522......................78R 1522......................80
SW 1522......................78SWR 1522......................80
1551....................109B 1551....................109
SW 1551....................109SWB 1551....................109
1610....................107SW 1610....................107
1622....................107SW 1622....................107
1800.............126-1281871T....................83
SW 1871T....................831899.............126,127
SW 1899......126-128,130
1931......126,127,132SW 1931.............126,127
1951......126,127,132SW 1951......126,127,132
1961......126,127,132SW 1961.............126,127
1971......................65SW 1971......................65
2001.............126-128SW 2001......126,127,130
2024.............126,127SW 2024......126-128,130
2090.............126-128SW 2090......126,127,130
2110.............126-128SW 2110 ......126,127,130
2130.............126-1282191 ....................110
SW 2191 ....................1102199.............126-128
SW 2199......126,127,130
2271....................125SW 2271....................125
2324.............126-128SW 2324......126,127,130
2350......126-128,130SW 2350.............126,127
2370.............126-128
2400.............126-1282450.............126-128
SW 2450......126,127,130
2510......................81R 2510......................82
SW 2510......................81SWR 2510......................82
2511 ......................81R 2511 ......................82
SW 2511 ......................81SWR 2511 ......................82
2522......................81R 2522......................82
SW 2522......................81SWR 2522......................82
2560.............126-1282580.............126-128
2610....................108SW 2610....................108
2611 ....................108SW 2611 ....................108
2622....................108SW 2622....................108
2670.............127,128SW 2670....................127
2801......................24
SW 2801......................242801B ...................13
SW 2801B ...................132801F8M...............24
SW 2801F8M...............242801FHF...............24
SW 2801FHF...............242801MB6 ..............24
SW 2801MB6 ..............242801MB8 ..............24
SW 2801MB8 ..............242801MBS..............24
SW 2801MBS..............242801MM................24
SW 2801MM................24TSW 2801......................24TSW 2801FHF...............24
CT 2801......................25SS 2801......................26ST 2801......................26TT 2801......................26ST 2801FHF...............26ST 2801F8M...............26TT 2801F8M...............26SS 2801MB6 ..............26ST 2801MB6 ..............26ST 2801MB8 ..............26ST 2801MM................26TT 2801MM................26
2811 ......................312811FHF ...............31
SW 2811FHF ...............31SW 2811 ......................31
TSW 2811 ......................31TT 2811 ......................26
2821......................67SW 2821......................67
2821FHF...............67SW 2821FHF...............67
2821F8M...............67SW 2821F8M...............67
2831......................30CT 2831......................25ST 2831......................26
2831T....................30TT 2831......................26
2891T....................84SW 2891T....................84BT 2901......................25CT 2901......................25CS 2901......................25BT 2901MB6 ..............25CT 2911 ......................25
3991T....................87SW 3991T....................87
4001.............126-128SW 4001......126,127,130
4200.............126-128SW 4200......126,127,130
4823.............126-128SW 4823......126,127,130
4835......................94SW 4835......................94
4881 ....................111SW 4881 ....................111
5061....................125
6281....................125
9091....................104B 9091....................104
SW 9091....................104SWB 9091....................104
9821T....................86SW 9821T....................86
9841T....................86SW 9841T....................86
9871T....................86SW 9871T....................86
10103....................71SW 10103....................71
10403....................5110603....................7210683....................72
11103 ....................33SW 11103 ....................33
11403 ....................1011603 ....................3511683 ....................35
12111 ....................14BS 12111 ....................27BT 12111 ....................27CT 12111 ....................27ST 12111 ....................28
SW 12111 ....................14TSW 12111 ....................14
TT 12111 ....................2912111ER ...............19
ST 12111ER ...............28SW 12111ER ...............19
12111F8M .............14SW 12111F8M .............14
12111FHF .............14TT 12111FHF .............29
SW 12111FHF .............14SW 12111HF6 .............14SW 12111HF7 .............14
12111MM ..............14SW 12111MM ..............14
12111MB6.............14ST 12111MB6.............28
Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No.
Index
3
SW 12111MB6.............14TT 12111MB6.............29
12111MB8.............14BT 12111MB8.............27CT 12111MB8.............27ST 12111MB8.............28
SW 12111MB8.............1412111MBS ............14
SW 12111MBS ............1412111MMT ............14
SW 12111MMT ............1412111R..................22
SW 12111R..................2212111T ..................14
SW 12111T ..................14
12141....................55SW 12141....................55
12141B .................52SW 12141B .................52
12141F8M.............55SW 12141F8M.............55
12141FHF.............55SW 12141HF6.............55SW 12141HF7.............55
12141MB8 ............55SW 12141MB8 ............55
12141T..................55
CT 12141....................62ST 12141....................62TT 12141....................62
SW 12141FHF.............5512141MM..............55
SW 12141MM..............55SW 12141T..................55
12161....................23SW 12161....................23
12161F8M.............23SW 12161F8M.............23
12161MM..............23SW 12161MM..............23
12181....................66SW 12181....................66
12321....................16SW 12321....................16
12321FHF.............16SW 12321FHF.............16
12351....................56SW 12351....................56
12401....................15SW 12401....................15
12401C .................17SW 12401C .................17
12401FHF.............15SW 12401FHF.............15
12401T..................15SW 12401T..................15
12421....................16
SW 12421....................1612421FHF.............16
SW 12421FHF.............1612443....................63
SW 12443....................6312501....................56
SW 12501....................5612501C .................57
SW 12501C .................5712501T..................56
SW 12501T..................5612521....................16
SW 12521....................1612521FHF.............16
SW 12521FHF.............1612551....................56
SW 12551....................56SW 12551FHF.............16
12921....................16SW 12921....................16
12921FHF.............16SW 12921FHF.............16
13111 ....................2113111BB ...............2113111FHF .............2113111F8M .............21
SW 13111 ....................21SW 13111F8M .............21SW 13111FHF .............21SW 13111MB8.............21SW 13111MM ..............21SW 13111HF4 .............21SW 13111HF5 .............21
13111R..................22SW 13111R..................22
13141....................58SW 13141....................58
13141FHF.............58SW 13141FHF.............58
13363MMP .............713373......................913373MMP .............713401....................21
SW 13401....................2113701..................102
SW 13701..................102
15111 ....................37SW 15111 ....................37
15111F8M .............37SW 15111F8M .............37
15111FHF .............37SW 15111FHF .............37
15111MB6.............37SW 15111MB6.............37
15111MB8.............37SW 15111MB8.............37
15111MBS ............37SW 15111MBS ............37
15141....................75SW 15141....................75
15141F8M.............75SW 15141F8M.............75
15141FHF.............75SW 15141FHF.............75
15141MB6 ............75SW 15141MB6 ............75
15141MB8 ............75SW 15141MB8 ............75
15141MBS............75SW 15141MBS............75
15141MM..............75SW 15141MM..............75
15321....................37SW 15321....................37
15351....................75SW 15351....................75
15373....................34RJ 15373....................34
15373FHF.............34RJ 15373FHF.............34
15401....................37SW 15401....................37
15443....................76SW 15443....................76
15493....................7415493F8M.............7415493FHF.............7415493MB6 ............7415493MB8 ............7415493MBS............7415493MM..............74
15501....................75SW 15501....................75
15501FHF.............75SW 15501FHF.............75
15593..................105SW 15593..................105
15593FHF...........105SW 15593FHF...........105
15701..................106B 15701..................106
SW 15701..................106SWB 15701..................106
15701FHF...........106SW 15701FHF...........106
15801....................40ST 15801....................41
SW 15801....................40ST 15801F8M.............41
15801FHF.............40SW 15801FHF.............40
15801MB8 ............40SW 15801MB8 ............40
15801MBS............40
SW 15801MBS............4015801MM..............40
SW 15801MM..............4015821....................77
SW 15821....................7715821F8M.............77
SW 15821F8M.............7715821FHF.............77
SW 15821FHF.............7715821MB6 ............77
SW 15821MB6 ............7715821MB8 ............77
SW 15821MB8 ............7715821MBS............77
SW 15821MBS............7715821MM..............77
SW 15821MM..............7715831....................40
SW 15831....................40
16111 ....................39SW 16111 ....................39
22141CL ...............61SW 22141CL ...............61
22141F8M.............60SW 22141F8M.............60
22141MM..............60SW 22141MM..............60
22141MT...............61SW 22141MT...............61
22461....................64SW 22461....................64
22461FHF.............64SW 22461FHF.............64
22483CL ...............5022493CL ...............5022493MT...............50
SW 23141HF4.............59SW 23141HF5.............59
32111 ..............18, 4332111F8M.......18, 4332111MB8.......18, 4332111MM ..............18
SW 32111 ..............18, 43TSW 32111 ....................18
SW 32111F8M.......18, 43TSW 32111F8M .............18
SW 32111MB8.......18, 43SW 32111MM ..............18
32141....................55SW 32141....................55
32141F8M.............55SW 32141F8M.............55
32141MB8 ............55SW 32141MB8 ............55
32353......................632353MB8 ..............632363......................732363MB8 ..............732373......................832373MB8 ..............832473....................4732483....................4832493....................4932573....................9032583....................9132593....................92
32701....................99SW 32701....................99
32701MB8 ............99SW 32701MB8 ............99
35111 ..............38, 43SW 35111 ..............38, 43
35111F8M.......38, 43SW 35111F8M.......38, 43
35111MB8.......38, 43SW 35111MB8.......38, 43
41000 04...............1941000 06...............1941000 08...............1941000 09...............19
42211MTG ............11SW 42211MTG ............11SW 42241HF2.............54
42241MTG............54SW 42241MTG............54
43111MMP............12SW 43211HF2 .............11
43241MMP ...........5343241MTP ............53
SWB 43721HF2.............93SWB 43721HF4.............93SWB 43721HF5.............93
54853..................103SW 54853..................103
54863..................10358431T..................85
SW 58431T..................85
59851....................32SW 59851....................32
59851F8M.............32SW 59851F8M.............32
59851MBS............32SW 59851MBS............32
59851MM..............32SW 59851MM..............32
59951....................3259951T..................32
66703....................42SW 66703....................42
66713....................42SW 66713....................42
66723....................79SW 66723....................79
66733....................79SW 66733....................79
66773....................42SW 66773....................42
66793....................79SW 66793....................79
82401....................15SW 82401....................15
82401FHF.............15
82501....................56SW 82501....................56
82718....................99SW 82718....................99
Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No. Series No. Page No.
SW 12111 F8M
Series Number(typical)
Prefix:This maximum 3 alphameric letter beginning the Vogt Valve seriesnumber is normally indicative of the valve connection. Historically, a fewdesign features have also been used as part of the prefix including S, Band R. A fully female threaded valve as the traditional Vogt standarddoes not have a prefix number (see below for prefix descriptions).
Suffix:This maximum 3 alphameric character ending of the Vogt Valveseries number is normally indicative of the valve internal trimpackage. Historically, packing and a few design features have alsobeen used as part of the suffix number including T, B and ER. Avalve with the traditional Vogt standard trim package and packingis not assigned a suffix number (see below for suffix descriptions).
Prefix Description:(Blank) - Female NPT (both ends)B - Ball Check (female NPT)BS - Female SW by Male Butt WeldBT - Female Thd by Male Butt WeldBW - Butt WeldCS - Female SW by Male Couplet CT - Female Thd by Male Couplet R - In-Line Repair (female NPT)RJ - Ring Joint Flanges S - Swing Check (female NPT)SS - Female SW by Male SW ST - Female Thd by Male SW SW - Socket Weld SWB - Ball Check (SW) SWR - In-line Repairable (SW) SWS - Swing Check (SW) TS - Female SW by Male Thd TSW - Female Thd by Female SW TT - Female Thd by Male Thd
Suffix Description:(Blank) – Standard TrimB – Bellows Valve C – Cryogenic Valve CL – Chlorine Valve Trim – Monel/Hastelloy ER – Emissions Reduction – Double Packed with Lantern Ring F8M– 316 TrimFHF – Full Hard Face (unless standard) FH8 – Full Hard Faced F8M TrimFHT – Teflon Packing and Full Hard FaceHF – Hard Faced Disc (F316 Globes and Checks Only) HF2 – UOP Alkylation HF4 – UOP Alkylation HF5 – UOP Alkylation HF6 – UOP Alkylation HF7 – UOP Alkylation L – Locking Device MB6 – 13% Chrome Trim – NACE MB8 – 316 Trim Hard Faced Seats and Disc/Wedge – NACE MBS – Monel Trim – NACE MM – Monel Trim – Grafoil Packing and Gasket MMP – Phillips Alkylation MMT – Monel Trim – Teflon Packing and Gasket MT – Chlorine Valve Trim – Monel/Teflon Disc/HastelloyMTG – Vogt Alkylation MTP – Phillips Alkylation R– Reactive Seal T – Teflon Packing and Gasket ZLB – Zero Leakage Check Valve – Buna N ZLE – Zero Leakage Check Valve – Ethylene Propylene ZLN – Zero Leakage Check Valve – Neoprene ZLV – Zero Leakage Check Valve – Viton 14
Valve Design/Material:This maximum 5 numeric character uniquelyidentifies the valve to its design (gate, globe,angle, check, etc.) and pressure boundary materialof construction (A105, A182-F5, F11, F316, etc.).The prefix and suffix to this number provide detailsto the design, end connections and trim optionincluding packing.
Legend:The prefixes and suffixes based ondesign are limited to S, B, R and ER (as listed above) ONLY.
Expansion of new valve designs areadded as new SERIES NUMBERS.
(See the VV 200 individual pages forstandard series available.)
Description of Series Number System for Vogt Valves(Order Vogt Valves & Fittings by size—series number)
4
46
Globe and Angle valves are suitable
for throttling as well as shut-off. They
are customarily installed so that the
media pressure and preferred flow
direction is under the disc (as
illustrated). Flow above the disc is
also acceptable.
The Vogt Globe and Angle valve lines
provide a variety of design variations
to fulfill your requirements. Flow
characteristics can be determined
from the Cv Factors listed on pages
122 and 123.
Bellowseal globe valves are suitable
for applications requiring total
containment of the flowing media
frequently necessary to protect the
environment and to eliminate the loss
of hazardous and/or costly fluids.
The valve packing and bonnet gasket
are totally isolated by the bellows
from the flowing media and pressure.
The packing and gasket are
incorporated in the valve to serve in a
“back up” role only.
Globe and Angle Valve Section – Pages 46-87
Dimensions are in inches and millimeters.
Dimensions are subject to change without notice.
Order by Size and Series Number.
BOLTED BONNET BELLOW SEAL GLOBE VALVE
BOLTED BONNETGLOBE VALVE
BOLTED BONNETANGLE VALVE
GL
OB
EC
LA
SS
150
(P
N 2
0)47
3, 4
73B
, 324
73
47
Forged Globe Valves
Bellows Globe Valve
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
125
5.001278.442147.81198.7519.14.7512111.95.4
1-1/240
6.50165
10.382649.472411.2832.55.7514625.011.4
250
8.00203
10.882769.812491.5338.97.0017838.017.3
3/420
4.621176.881576.62168.7519.14.7512111.65.3
125
5.001276.881576.62168.7519.14.7512111.75.3
NPSDN
DimensionsBold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Valve flanges conform to ASME Standard B16.5 and end-to-end dimensions conform to ASME Standard B16.10.
For Cv factors see page 123, Valve Matrix J. Cv factors for Bellows valve see page 123, Valve Matrix K.Refer to pages 116-120 for full materials description
1/215
4.251086.621686.19157.5012.74.001026.83.1
3/420
4.621176.621686.19157.5012.74.001028.03.6
1-1/240
6.50165
10.002549.502711.5338.97.0017825.311.5
250
8.00203
10.002549.502711.5338.97.0017838.617.5
1/215
4.251086.321616.13156.5012.74.001027.03.2
Bellows Globe ValveFlanged Ends 1/16" R.F.
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc (Except Bellows Valve)■ Integral Hard Faced Seat■ ASME B16.34
Class 150 (PN 20)Conventional Port285 PSI @ 100°F (19.7 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
473 Trim: 13% Cr. Seat: HF
473F8M Trim: 316Seat: HF
473MM Trim: MonelSeat: HF
473MB8 Trim: 316Seat/Disc: HF
473B Stem: 13% Cr. (Bellows) Disc: 316HF
Bellows: 316LDisc/Seat: HF
A1350 LF2 Body/Bonnet32473 Trim: 13% Cr.
Seat: HF
Meets API-602 required wall thicknesses.
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
GL
OB
EC
LA
SS
300
(P
N 5
0)48
3, 4
83B
, 324
83
48
Forged Globe Valves
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc (Except Bellows Valve)■ Integral Hard Faced Seat■ ASME B16.34
Bellows Globe Valve
Flanged Ends 1/16" R.F.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
125
8.002038.442147.81198.7519.14.7512115.67.1
1-1/240
9.00229
10.382649.472411.2832.55.7514629.913.6
250
10.50267
10.882769.812491.5338.97.0017844.020.0
3/420
7.001786.881756.62168.7519.14.7512115.16.9
125
8.002036.881756.62168.7519.14.7512115.57.0
NPSDN
Valve flanges conform to ASME Standard B16.5 and end-to-end dimensions conform to ASME Standard B16.10.
For Cv factors see page 123, Valve Matrix J. Cv factors for Bellows valve see page 123, Valve Matrix K.Refer to pages 116-120 for full materials description.
1/215
6.001526.621686.19157.5012.74.001028.53.9
3/420
7.001786.621686.19157.5012.74.0010211.45.2
1-1/240
9.00229
10.002549.502711.5338.97.0017840.218.2
250
10.50267
10.002549.502711.5338.97.0017843.819.9
1/215
6.001526.321616.13156.5012.74.001028.73.9
Bellows Globe Valve
Class 300 (PN 50)Conventional Port740 PSI @ 100°F (51.0 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
483 Trim: 13% Cr. Seat: HF
483F8M Trim: 316Seat: HF
483MM Trim: MonelSeat: HF
483MB8 Trim: 316Seat/Disc: HF
483B Stem: 13% Cr. (Bellows) Disc: 316HF
Bellows: 316LDisc/Seat: HF
A350 LF2 Body/Bonnet32483 Trim: 13% Cr.
Seat: HF
Meets API-602 required wall thicknesses.
DimensionsBold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
GL
OB
EC
LA
SS
600
(P
N 1
10)
493,
493
B, 3
2493
49
Forged Globe Valves
Flanged Ends: 1/4" R.F.
DimensionsBold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
6.501656.321606.13156.5012.74.001028.84.0
3/420
7.501906.881756.62168.7519.14.7512114.56.6
125
8.502166.881756.62168.7519.14.7512116.67.6
1-1/240
9.50241
10.002549.502411.5338.97.0017843.819.9
250
11.50292
10.002549.502411.5338.97.0017849.322.4
NPSDN
1/215
6.501656.621686.19157.5012.74.001028.63.9
3/420
7.501906.621686.19157.5012.74.0010210.84.9
125
8.502168.442147.81198.7519.14.7512117.07.7
1-1/240
9.50241
10.382649.472401.2832.55.7514633.515.2
250
11.50292
10.882769.812491.5338.97.0017846.020.9
For Cv factors see page 123, Valve Matrix J.
Valve flanges conform to ASME Standard B16.5 and end-to-enddimensions conform to ASME Standard B16.10.
For Cv factors for Bellows valve see page 123, Valve Matrix K.
Bellows Globe Valve
Bellows Globe Valve
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc (Except Bellows Valve)■ Integral Hard Faced Seat■ ASME B16.34
Class 600 (PN 110)Conventional Port1480 PSI @ 100°F (102.1 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER493 Trim: 13% Cr.
Seat: HF
493F8M Trim: 316Seat: HF
493MM Trim: MonelSeat: HF
493MB8 Trim: 316Seat/Disc:HF
493B Stem: 13% Cr. (Bellows) Disc: 316 HF
Bellows: 316LDisc/Seat: HF
A350 LF2 Body/Bonnet
32493 Trim: 13% Cr. Seat: HF
Meets API-602 required wall thicknesses.
GL
OB
EC
LA
SS
300
(P
N 5
0), C
LA
SS
600
(P
N 1
10)
2248
3, 2
2493
50
Forged Globe Valves – For Water-Free Chlorine Service
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Disc or
Teflon-Inserted Disc■ Renewable Seats■ ASME B16.34
Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+ Valves contain TEFLON — maximum temperature 500°F.Valve flanges conform to ASME Standard B16.5 and end-to-end dimensions conform toASME Standard B16.10.
Refer to pages 116-120 for full materials description.For Cv factors see page 123, Valve Matrix L.
1/215
6.501656.621686.31160.399.94.001028.53.9
3/420
7.501906.621686.31160.399.94.0010213.15.9
125
8.502168.442148.06205.6616.84.7512116.57.5
1-1/240
9.50241
10.382649.812491.1930.25.7514635.015.9
250
11.50292
11.06281
10.382641.4436.67.0017846.221.0
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
125
8.00203
8.442148.06205.6616.84.7512115.77.1
1-1/240
9.00229
10.382649.812491.1930.25.7514633.615.3
250
10.50267
10.88276
10.192591.4436.67.0017844.320.1
NPSDN
Dimensions1/215
6.001526.621686.31157.399.94.001028.03.6
3/420
7.001786.621686.31157.399.94.0010212.45.6
Series 22493CLSeries 22483CL
Class 300 (PN 50)Conventional Port740 PSI @ 100°F (51.0 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
22483CL Stem: Hastelloy CTrim: Monel
Class 600 (PN 110)Conventional Port1480 PSI @ 100°F (102.1 BAR @ 38°C)
22493CL Stem: Hastelloy CTrim: Monel
22493MT Stem: Hastelloy C+Trim: Monel/TeflonDisc: Teflon Insert
Chlorine Service Temperatures Not to Exceed 300°F
Meets API-602 required wall thicknesses.
Flanged Ends Class 300: 1/16" R.F. Flanged Ends Class 600: 1/4" R.F.
Disc with Teflon Insert
GL
OB
EC
LA
SS
600
(P
N 1
10)
1040
3
51
Forged Globe Valves
Flanged Ends: 1/4" R.F.
Class 600 (PN 110)
1480 PSI @ 100°F (102.1 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
10403 Trim: 13% Cr.
Meets API-600 required wall thicknesses.
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Valve flanges conform to ASME Standard B16.5 and end-to enddimensions conform to ASME Standard B16.10.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
6.50165
10.56268
10.19259.5012.74.7512119.58.9
3/420
7.50190
11.69297
11.06281.7218.35.7514631.214.2
125
8.50216
12.94329
11.94303.9724.67.0017853.124.1
1-1/240
9.50241
16.00406
15.123841.4436.69.7524876.234.6
250
11.50292
18.06459
17.124351.8847.89.7524897.744.4
NPSDN
2-1/265
13.00330
20.81529
19.624982.2256.412.00305170.77.2
380
14.00356
22.25565
21.005332.8171.413.75349220.99.9
1-1/432
9.00229
14.56370
13.883531.1930.28.0020357.125.9
For Cv factors see page 123, Valve Matrix M.Refer to pages 116-120 for full materials description.
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seats■ ASME B16.34
BE
LL
OW
S –
GL
OB
EC
LA
SS
800
(P
N 1
30)
1214
1B
52
Forged Globe Valves – Bellowseal
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Multi-Ply Bellows■ Hard Faced Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld12141B SW12141B
Trim: Stem: 13% Cr. Disc: 316 HF Bellows: 316LSeats: HF
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.321606.13155.5012.74.001025.02.2
3/420
4.621176.881746.62168.7519.04.751208.73.9
125
4.621176.881746.62168.7519.04.751208.53.8
1-1/240
7.75196
10.002549.502411.5338.87.0017730.513.7
250
7.75196
10.002549.502411.5338.87.0017730.513.7
NPSDN
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix K.
GL
OB
EC
LA
SS
600
(P
N 1
10)
4324
1MM
P, 4
3241
MT
P
53
Forged Globe Valves – For HF Alkylation Service
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
4.001026.621686.31160.399.94.001025.12.3
125
6.25159
10.382649.88251.9724.65.7514621.49.7
3/420
4.621178.442148.06205.6616.84.751219.14.1
NPSDN
+ Valves contain TEFLON — maximum temperature 500°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix N.
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Disc or
Loose Teflon-Inserted Disc■ Renewable Seat
Disc with Teflon Insert
Class 600 (PN 110)Full Port 1480 PSI @ 100°F (102.1 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBERThreaded Socket Weld43241MMP+ Trim: Monel
43241MTP+ Trim: Monel (3/4 only) Disc: Teflon Insert
Listed in Phillips Petroleum Company’s HF AlkylationProcess Design Spec. Manual.
GL
OB
EC
LA
SS
800
(P
N 1
30)
4224
1MT
G, S
W42
241H
F2
54
Forged Globe Valves – For HF Alkylation Service
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Double Packing■ Lantern Ring■ Grease Injector■ Teflon-Inserted Disc■ Renewable Seat
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+ Valves contain TEFLON — maximum temperature 500°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix L.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
8.282108.00203.399.94.001025.92.7
3/420
4.001028.282108.00203.399.94.001026.63.0
125
4.62117
10.192599.75248.6616.84.7512110.24.6
1-1/240
6.25159
11.94303
11.282871.1930.25.7514621.79.9
250
7.75197
13.16334
12.473171.4436.67.0017829.013.2
NPSDN
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld42241MTG+ SW42241MTG+
Trim: MonelDisc: Teflon Insert
SW42241HF2+ (Sizes 1/2 - 1)Trim: MonelDisc: Teflon Insert
HYDROFLUORIC ACID (HF)ALKYLATION VALVES.
UOPAPPROVED.
GL
OB
EC
LA
SS
800
(P
N 1
30)
1214
1, 3
2141
55
Forged Globe Valves
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBERBody/Bonnet Threaded Socket WeldA105 12141 SW12141
12141T+ SW12141T+Trim: 13% Cr. Seat: HF
12141FHF SW12141FHFTrim: 13% Cr. Disc/Seat: HF
SW12141HF6SW12141HF7Trim: 13% Cr.Seat: HF
12141F8M SW12141F8MTrim: 316Seat: HF
12141MB8 SW12141MB8Trim: 316Disc/Seat: HF
12141MM SW12141MMTrim: MonelSeat: HF
A350 LF2 32141 SW32141Trim: 13% Cr. Seat: HF
32141F8M SW32141F8MTrim: 316Seat: HF
32141MB8 SW32141MB8Trim: 316Disc/Seat: HF
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
HYDROFLURIC ACID(HF) ALKYLATION
VALVES. UOPAPPROVED.
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+Valves contain TEFLON – maximum temperature 500°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix J.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.621686.19157.5012.74.001024.32.0
3/420
4.001026.621686.19157.5012.74.001025.02.3
125
4.621178.442147.81198.7519.14.751218.73.9
1-1/240
6.25159
10.382649.472411.2832.55.7514620.29.2
250
7.75197
10.882769.812491.5338.97.0017829.913.6
NPSDN
1/48
3.7595
6.621686.19157.5012.74.001024.82.2
3/810
3.7595
6.621686.19157.5012.74.001024.82.2
1-1/432
6.25159
10.382649.472411.2832.55.7514620.99.5
Class 800 (PN 130)Conventional Port2000 PSI @ 100°F (137.9 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded Socket WeldF11, Cl. 2 12351 SW12351(1-1/4% Cr.) Trim: 13% Cr.
Seat: HF
F22, Cl. 3 12551 SW12551(2-1/4% Cr.) Trim: 13% Cr.
Seat: HF
F316/F316L 1920 PSI @ 100°F (132.4 BAR @ 38°C)12501 SW12501 12501T+ SW12501T+
Trim: 316
F316H 1920 PSI @ 100°F (132.4 BAR @ 38°C)82501 SW82501
Trim: 316H
GL
OB
EC
LA
SS
800
(P
N 1
30)
1235
1, 1
2501
, 125
51, 8
2501
56
Forged Globe Valves
3/810
3.7595
6.621686.19157.5012.74.001024.82.2
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+Valves contain TEFLON – maximum temperature 500°F.Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.621686.19157.5012.74.001024.32.0
3/420
4.001026.621686.19157.5012.74.001025.02.3
125
4.621178.442147.81198.7519.14.751218.73.9
1-1/240
6.25159
10.382649.472411.2832.55.7514620.29.2
250
7.75197
10.882769.812491.5338.97.0017829.913.6
NPSDN
1/48
3.7595
6.621686.19157.5012.74.001024.82.2
1-1/432
6.25159
10.382649.472411.2832.55.7514620.99.5
For Cv factors see page 123, Valve Matrix J.
■ Round Bolted Bonnet■ Spiral Wound Gasket ■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
GL
OB
EC
LA
SS
800
(P
N 1
30)
1250
1C
57
Forged Globe Valves – Cryogenic Service to -325°F (-198°C)
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Seat■ Extended Bonnet■ ASME B16.34
Class 800 (PN 130)Conventional Port1920 PSI @ 100°F (132.4 BAR @ 38°C)1920 PSI @ -325°F (132.4 BAR @ -198°C)For other ratings see pgs. 112-115
F316/F316L Body/Bonnet
SERIES NUMBER
Threaded Socket Weld12501C+ SW12501C+
Trim: 316
1/215
3.7595
21.22539
20.78528.5012.74.001026.32.9
3/420
4.00102
21.22539
20.78528.5012.74.001027.03.2
125
4.62117
22.75578
22.03560.7519.14.7512111.75.3
1-1/240
6.25159
27.64702
26.726791.2832.55.7514623.710.8
250
7.75197
28.19716
27.126891.5338.98.0020333.915.4
NPSDN
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+Valves contain TEFLON—maximum temperature 500°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix J.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
GL
OB
EC
LA
SS
800
(P
N 1
30)
1314
1
58
Forged Globe Valves
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Full Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld13141 SW13141
Trim: 13% Cr. Seat: HF
13141FHF SW13141FHFTrim: 13% Cr. Disc/Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
3/420
4.621178.502167.78198.7519.14.751219.14.1
125
6.25159
10.382649.472401.2832.55.7514621.49.7
1-1/432
6.25159
10.382649.472401.2832.55.7514620.69.4
1-1/240
7.75197
10.882769.812491.5338.97.0017829.913.5
250
9.00229
13.06332
12.193102.0050.88.0020353.424.2
NPSDN
1/2154.01026.621686.12155.5012.74.001025.12.3
For Cv factors see page 123, Valve Matrix P.
GL
OB
EC
LA
SS
800
(P
N 1
30)
2314
1HF
4, 2
3141
HF
5
59
Forged Globe Valves – For HF Alkylation Service
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seat■ ASME B16.34
Class 800 (PN 130)1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld– SW23141HF4– SW23141HF5
Trim: Monel
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix N.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
4.001026.621686.34161.399.94.001025.12.3
3/420
4.621178.442148.06205.6616.84.751219.14.1
125
6.25159
10.382649.88251.9724.65.7514621.49.7
1-1/240
7.75197
10.88276
10.192591.4436.67.0017820.69.4
250
9.00229
13.06332
12.193101.8847.88.0020330.013.6
NPSDN
HYDROFLUORIC ACID (HF) ALKYLATION VALVES.
UOP APPROVED.
GL
OB
EC
LA
SS
800
(P
N 1
30)
2214
1
60
Forged Globe Valves
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld22141F8M SW22141F8M
Trim: 316
22141MM SW22141MMTrim: Monel
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.621686.31160.399.94.001024.82.2
3/420
4.001026.621686.31160.399.94.001025.02.3
125
4.621028.442148.06205.6616.84.751218.94.0
1-1/240
6.25121
10.382649.782481.1930.25.7514620.19.1
250
7.75197
10.88276
10.192591.4436.67.0017829.113.2
NPSDN
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix L.
1/48
3.7595
6.621686.31160.399.93.25834.82.2
3/810
3.7595
6.621686.31160.399.93.25834.92.2
1-1/432
6.25121
10.382649.782481.1930.25.7514620.89.4
61
Forged Globe Valves – For Water-Free Chlorine Service
GL
OB
EC
LA
SS
800
(P
N 1
30)
2214
1
Disc with Teflon Insert
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Disc or
Teflon-Inserted Disc■ Renewable Seats■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld22141CL SW22141CL
Stem: Hastelloy CTrim: Monel
22141MT+ SW22141MT+Stem: Hastelloy CTrim: MonelDisc: Teflon Insert
Chlorine Service Temperatures Not to Exceed 300°F
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+Valves contain TEFLON—maximum temperature 500°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix L.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.621686.34161.399.94.001024.82.2
3/420
4.001026.621686.34161.399.94.001025.02.3
125
4.621178.442148.06205.6616.84.751218.94.0
1-1/240
6.25159
10.382649.782481.1936.05.7514620.19.1
250
7.75197
10.88276
10.192591.4436.67.0017829.113.2
NPSDN
1/48
3.7595
6.621686.34161.399.93.25834.82.2
3/810
3.7595
6.621686.34161.399.93.25834.92.2
1-1/432
6.25159
10.382649.782481.1936.05.7514620.89.4
62
Forged Globe Valves – Extended Body
GL
OB
E E
XT
EN
DE
DB
OD
YC
LA
SS
800
(P
N 1
30)
1214
1
Class 800 (PN 130)1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
SERIES NUMBER TYPE ENDS
CT 12141 Trim: 13% Cr. IntegrallySeat: HF Reinforced
Male CoupletFemaleThreaded
ST 12141 Trim: 13% Cr. Male Socket Seat: HF Weld
FemaleThreaded
TT 12141 Trim: 13% Cr. Male ThreadedSeat: HF Female
Threaded
250
6.501653.8899
2.0051
1.5339
11.06281
10.002548.002032.2256
3.1279
2.3860
1.8146.5614
6.001522.9475
DimensionsNPSDN
1-1/240
6.501653.1279
1.4737
1.2833
10.382649.472495.751461.7244
2.5665
1.9048.31.4737.4411
6.001522.3860
125
5.751462.3159
1.0025.7519
8.442147.811984.751211.2231
1.9449
1.3233.5.8121.4411
5.251331.7544
3/420
7.001782.0051.7519.5013
6.621686.191574.00102.9725
1.5640
1.0526.7.6517.4411
4.501141.4437
1/215
7.001782.0051.7519.5013
6.621686.191574.00102.9725
1.5640.8421.3.5213.318
4.501141.4437
Size
A
B
C
G
H
J
K
L
M
N
P
R
S
T
Refer to Pages 116-120 for full materials description. For Cv factors see Page 123Valve Matrix Q.
63
Forged Globe Valves – For Flow Control Service
GL
OB
EC
LA
SS
800
(P
N 1
30)
1244
3
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose V-Port Disc■ Integral Hard Faced Seat■ Dial & Indicator■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld12443 SW12443
Trim: 13% Cr. Seat: HF
(Approx.)Size Cv Factor No. of Turns
1/2 1.46 3
3/4 2.38 4-1/2
1 4.54 5
1-1/2 9.65 6-1/2
2 14.60 8
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.811736.53166.383.74.001025.12.3
3/420
4.001026.811736.44164.4411.24.001025.42.5
125
4.621178.442147.91201.6215.74.751219.64.4
1-1/240
6.25159
10.382649.78248.9423.95.7514619.08.6
250
7.75197
10.882769.812491.1930.27.0017831.414.3
NPSDN
64
Forged Globe Valves – For Flow Control Service
GL
OB
EC
LA
SS
800
(P
N 1
30)
2246
1
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Needle Point Flow Control■ Renewable Seat■ ASME B16.34
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/48
3.7595
6.691706.38162.194.83.25834.82.2
3/810
3.7595
6.691706.38162.194.83.25834.62.1
1/215
3.7595
6.691706.38162.194.84.001025.02.3
3/420
4.001026.691706.38162.194.84.001024.92.2
125
4.621178.622198.06205.256.44.751218.63.9
NPSDN
Class 800 (PN 130)Needle Point Stem/Seat1975 PSI @ 100°F (136.2 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld22461 SW22461
Trim: 13% Cr.
22461FHF SW22461FHFTrim: 13% Cr. Stem/Seat: HF
(Approx.)Size Cv Factor No. of Turns
1/4 .56 3-1/2
3/8 .55 3-1/2
1/2 .68 3-1/2
3/4 .99 3-1/2
1 1.50 5-1/2
65
Forged Angle Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
1971
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld1971 SW1971
Trim: 13% Cr. Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
1.6241
6.621686.19157.5012.74.001024.82.2
3/420
1.7544
6.621686.19157.5012.74.001025.22.4
125
2..3159
8.442147.81198.7519.14.751218.73.9
1-1/240
3.1279
10.382649.532421.2832.55.7514618.78.5
250
3.6292
13.25337
12.193101.5338.98.0020333.815.3
NPSDN
1/48
1.6241
6.621686.19157.5012.74.001025.02.3
3/810
1.6241
6.621686.19157.5012.74.001025.02.3
1-1/432
3.1279
10.382649.532421.2832.55.7514618.88.5
For Cv factors see Page 123, Valve Matrix S.
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
66
Forged Globe Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
1218
1
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Inside Screw Stem■ Screw Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld12181 SW12181
Trim: 13% Cr. Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.7595
6.311605.88149.5012.74.001024.62.1
3/420
4.001026.311605.88149.5012.74.001024.82.2
125
4.621178.002037.31186.7519.14.751218.53.9
1-1/240
6.25159
10.222609.342371.2832.55.7514619.38.8
250
7.75197
11.44291
10.382641.5338.97.0017830.213.7
NPSDN
1/48
3.7595
6.311605.88149.5012.74.001024.92.2
3/810
3.7595
6.311605.88149.5012.74.001024.82.2
1-1/432
6.25159
10.222609.342371.2832.55.7514620.99.5
For Cv factors see Page 123, Valve Matrix J.
67
Forged Globe Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
2821
■ Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld2821 SW2821
Trim: 13% Cr. Seat: HF
2821FHF SW2821FHFTrim: 13% Cr. Disc/Seat: HF
2821F8M SW2821F8MTrim: 316Seat: HF Dimensions Bold face numerals are in inches and pounds.
Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see Page 123, Valve Matrix J.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.2583
6.621686.19157.5012.74.001023.61.6
3/420
3.5089
6.621686.19157.5012.74.001024.01.8
125
4.621178.442147.81198.7519.14.751217.63.4
1-1/240
6.25159
10.382649.532421.2832.55.7514615.16.9
250
7.75197
10.882769.812491.5338.97.0017823.810.8
NPSDN
1/48
3.2583
6.621686.19157.5012.74.001023.61.6
3/810
3.2583
6.621686.19157.5012.74.001023.61.6
1-1/432
6.25159
10.382649.532421.2832.55.7514615.36.9
68
Forged "Y" Pattern Globe Valves
YPA
TT
ER
N G
LO
BE
LTD
CL
AS
S 8
00 (
PN
130
)81
0, 8
11, 8
22
Class 800 (PN 130)Full Port2000 PSI @ 100°F (137.9 BAR @ 38°C)
For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded Socket WeldA105 810 SW810
Trim: 13% Cr.Disc/Seat: HF
F11 Cl. 2 811 SW811(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF
F22 Cl. 3 822 SW822(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix TT.
Size
A-End-to-End
B-Center-to-Top
C-Seat Diameter
E-Handwheel Diameter
Weight
1/215
4.001029.12232.752175.751468.03.6
3/420
4.001029.12232.752175.751468.03.6
125
5.12130
10.442651.1228
7.0017812.05.4
1-1/240
7.50190
14.273622.0051
12.0030533.015.0
250
7.50190
14.273622.0051
12.0030532.014.5
NPSDN
■ Seal Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Removable Yoke/Operating Mechanism■ Gate Valve Operating Mechanism■ Repackable with Endless Packing Rings■ Loose Hard Faced Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD Pressure Class
69
Forged Globe Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
801
■ Union Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld801 SW801
Trim: 13% Cr. Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see Page 123, Valve Matrix J.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.2583
6.621686.19157.5012.74.001024.11.9
3/420
3.5089
6.621686.19157.5012.74.001024.32.0
125
4.621178.502167.78198.7519.14.751218.43.8
1-1/240
6.25159
10.442659.562431.2832.55.7514617.78.0
250
7.75197
10.882769.882511.5338.97.0017828.312.8
NPSDN
1/48
3.2583
6.621686.19157.5012.74.001024.11.9
3/810
3.2583
6.621686.19157.5012.74.001024.11.9
1-1/432
6.25159
10.442659.562431.2832.55.7514618.38.3
70
Forged Globe Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
851
■ Union Bonnet■ Spiral Wound Gasket■ Inside Screw Stem■ Screw Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld851 SW851
Trim: 13% Cr. Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see Page 123, Valve Matrix J.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.2583
6.311605.88149.5012.74.001023.91.8
3/420
3.5089
6.311605.88149.5012.74.001024.11.9
125
4.621177.932017.28185.7519.14.751218.03.6
1-1/240
6.25159
10.252609.382381.2832.55.7514617.17.8
250
7.75197
11.41290
10.442651.5338.97.0017829.713.5
NPSDN
1/48
3.2583
6.311605.88149.5012.74.001023.91.8
3/810
3.2583
6.311605.88149.5012.74.001023.91.8
1-1/432
6.25159
10.252609.382381.2832.55.7514617.78.0
71
Forged Globe Valves
GL
OB
EC
LA
SS
800
(P
N 1
30)
1010
3
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seat■ ASME B16.34
Class 800 (PN 130)Conventional Port1975 PSI @ 100°F (136.2 BAR @ 38°C)
For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld10103 SW10103
Trim: 13% Cr.
Meets API-600 required wall thicknesses.
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see Page 123, Valve Matrix M.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
3.6292
9.622449.25235.5012.74.7512112.65.7
3/420
4.50114
10.81275
10.31262.7218.35.7514619.38.8
125
5.00127
11.75298
11.19284.9724.67.0017828.813.1
1-1/240
7.25184
16.00406
15.063831.4436.69.7524857.125.9
250
9.00229
18.06458
17.124351.8847.89.7524885.939.0
NPSDN
2-1/265
10.25260
20.81529
19.624982.2256.412.00305128.58.1
380
13.00330
22.25565
21.005332.8171.413.75349188.85.4
1-1/432
6.50165
14.06357
13.503431.1930.28.0020340.018.2
72
Forged Globe Valves
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1060
3, 1
0683
■ Round Bolted Bonnet■ Flat Gasket Joint & Ring Gasket Joint ■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seat■ ASME B16.34
Class 1500 (PN 260)Full Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
10603 Trim: 13% Cr.
RING JOINT FACES 10683 Trim: 13% Cr.
Meets API-600 required wall thicknesses.
Ring Joint Faces
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
For Cv factors see page 123, Valve Matrix V.Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
3/420
9.00229
15.00381
14.38365.7218.37.0017860.227.3
125
10.00254
16.12409
15.31389.9724.68.0020378.035.4
1-1/432
11.00279
17.31440
16.694241.1930.29.7524893.542.4
1-1/240
12.00305
19.75502
18.754761.5038.112.00305
119.354.2
250
14.50368
23.00584
22.125621.8847.813.75349230
104.4
NPSDN
1/215
8.50216
13.12333
12.12308.5012.77.0017848.221.9
Valve flanges conform to ASME Standard B16.5 and end-to-enddimensions conform to ASME Standard B16.10.
Flanged Ends 1/4" R.F.
73
Forged Globe Valves
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1003
, 102
3
■ Round Bolted Bonnet■ Flat Gasket Joint & Ring Gasket Joint ■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Renewable Seat■ ASME B16.34
Class 1500 (PN 260)Full Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld1023 SW1023
Trim: 13% Cr.
1003 SW1003 Ring Joint Gasket Bonnet(Not illustrated)Trim: 13% Cr.
Meets API-600 required wall thicknesses.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix V.
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
3/420
5.00127
12.19328
11.38289.7218.37.0017829.613.4
125
6.50165
14.56370
13.50343.9724.68.0020344.620.2
1-1/432
7.25184
15.89404
15.093831.1930.29.7524862.828.5
1-1/240
9.00229
18.12460
17.254381.4436.69.7524898.344.6
NPSDN
1/215
4.50114
11.62295
10.91277.5012.75.7514621.69.8
250
9.50241
20.19513
19.194871.88478
12.00305
114.752.1
74
Forged Globe Valves
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1549
3
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
NPSDN
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Valve flanges conform to ASME Standard B16.5 and end-to-enddimensions conform to ASME Standard B16.10.
For Cv factors see page 123, Valve Matrix U.Refer to pages 116-120 for full materials description.
1/215
8.502167.882007.41188.5012.74.7512118.68.4
3/420
9.002297.882007.41188.5012.74.7512118.98.6
125
10.00254
10.122579.50241.7519.17.0017837.216.9
250
14.50368
13.31338
12.503181.3835.19.75248
111.850.8
1-1/240
12.00305
10.97279
10.412641.1228.48.0020355.025.0
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Faced Seat■ ASME B16.34
Class 1500 (PN 260)Conventional Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld15493 Trim: 13% Cr.
Seat: HF
15493F8M Trim: 316Seat: HF
15493MM Trim: MonelSeat: HF
15493FHF Trim: 13% Cr.Disc/Seat: HF
15493MB8 Trim: 316Disc/Seat: HF
15493MBS Trim: MonelSeat: HF
15493MB6 Trim: 13% Cr.Disc/Seat: HF
Flanged Ends 1/4" R.F.
75
Forged Globe Valves
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1514
1, 1
5351
, 155
01
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
1/215
4.501147.882007.41188.5012.74.751219.84.4
250
9.00229
13.31338
12.503181.3835.19.7524861.828.1
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix U.
3/420
4.501147.882007.41188.5012.74.751219.44.3
125
6.25159
10.122579.50241.7519.17.0017820.59.3
1-1/432
7.75197
10.97279
10.412641.1228.48.0020335.216.0
1-1/240
7.75197
10.97279
10.412641.1228.48.0020334.515.7
NPSDN
Class 1500 (PN 260)Conventional Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/BonnetA105 15141 SW15141
Trim: 13% Cr. Seat: HF
15141FHF SW15141FHFTrim: 13% Cr. Disc/Seat: HF
15141F8M SW15141F8MTrim: 316 Seat: HF
15141MB8 SW15141MB8Trim: 316 Disc/Seat: HF
15141MBS SW15141MBSTrim: MonelSeat: HF
15141MB6 SW15141MB6Trim: 13% Cr. Disc/Seat: HF
15141MM SW15141MMTrim: MonelSeat: HF
F316/F316L 3600 PSI @ 100°F (248.3 BAR @ 38°C)15501 SW15501
Trim: 316
15501FHF SW15501FHFTrim: 316 Disc/Seat: HF
F11, Cl. 2 3750 PSI @ 100°F (258.6 BAR @ 38°C)(1 1/4 Cr.) 15351 SW15351
Trim: 13% Cr. Disc/Seat: HF
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
76
Forged Globe Valves – For Flow Control Service
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1544
3
■ Round Bolted Bonnet■ Spiral Wound Gasket■ Outside Screw & Yoke■ Bolted Gland■ Loose V-Port Disc■ Integral Hard Faced Seat■ Dial & Indicator■ ASME B16.34
Class 1500 (PN 260)Conventional Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld15443 SW15443
Trim: 13% Cr. Seat: HF
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
4.501147.882007.47190.4411.24.7512110.84.9
3/420
4.501147.882007.47190.4411.24.7512110.44.7
125
6.25159
10.122579.62244.6215.77.0017821.59.8
1-1/240
7.75197
11.00279
10.34263.9423.98.0020335.516.1
250
9.00229
13.31338
12.503181.0326.29.7524862.828.5
NPSDN
(Approx.)Size Cv Factor No. of Turns
1/2 1.46 3
3/4 2.38 4-1/2
1 4.54 5
1-1/2 11.50 5-1/4
2 13.00 6-1/2
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
4.501147.882007.41188.5012.74.751218.84.0
250
9.00229
13.31338
12.503181.3835.19.7524849.022.2
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
Refer to pages 116-120 for full materials description. For Cv factors see page 123, Valve Matrix U.
3/420
4.501147.882007.41188.5012.74.751218.43.8
125
6.25159
10.122579.50241.7519.17.0017818.08.2
1-1/432
7.75197
11.12282
10.412641.1228.48.0020326.712.1
1-1/240
7.75197
11.12282
10.412641.1228.48.0020326.011.8
NPSDN
Forged Globe Valves
GL
OB
EC
LA
SS
150
0 (P
N 2
60)
1582
1
Class 1500 (PN 260)Conventional Port3705 PSI @ 100°F (255.5 BAR @ 38°C)For other ratings see pgs. 112-115
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld15821 SW15821
Trim: 13% Cr. Seat: HF
15821F8M SW15821F8MTrim: 316 Seat: HF
15821FHF SW15821FHFTrim: 13% Cr. Disc/Seat: HF
15821MM SW15821MMTrim: MonelSeat: HF
15821MB8 SW15821MB8Trim: 316 Disc/Seat: HF
15821MBS SW15821MBSTrim: MonelSeat: HF
15821MB6 SW15821MB6Trim: 13CRDisc/Seat: HF
■ Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Disc■ Integral Hard Faced Seat■ ASME B16.34
MATERIALS MEETREQUIREMENTS OF
NACE STANDARD MR-01-75 FOR
SOUR SERVICE
77
78
Forged "Y" Pattern Globe Valves
YPA
TT
ER
N G
LO
BE
LTD
CL
AS
S 1
690
(PN
290
)15
10, 1
511,
152
2
■ Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Stellite Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD
Pressure Class
Class 1690 (PN 290)Conventional Port4225 PSI @ 100°F (291.4 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded Socket WeldA105 1510 SW1510
Trim: 13% Cr.Disc/Seat: HF (Solid Stellite Disc)
F11 Cl. 2 1511 SW1511(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
F22 Cl. 3 1522 SW1522(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
250
7.50190
16.38416
14.883781.5338.9
12.00*30540.818.5
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
*1-1/2" & 2" sizes have impactor handwheels.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix X.
1/215
4.001029.062308.56217.5012.77.001789.14.1
3/420
4.001029.062308.56217.5012.77.001789.04.1
125
5.12130
11.00279
10.28261.7519.19.7524818.18.2
1-1/240
7.50190
16.38416
14.88378
1.5338.9
12.00*305
42.019.1
NPSDN
79
Forged Globe Valves
GL
OB
ELT
D C
LA
SS
250
0 (P
N 4
20)
6672
3, 6
6733
, 667
93
Class 2500 (PN 420)Full Port6250 PSI @ 100°F (431.0 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded Socket WeldA105 66723 SW66723
Trim: 13% Cr. Disc/Seat: HF (Solid Stellite Disc)
F11 Cl. 2 66733 SW66733(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
F22 Cl. 3 66793 SW66793(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
*1-1/2" & 2" sizes have impactor handwheels.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix Y.
1/215
4.001029.062308.56217.5012.77.001789.04.1
3/420
5.12130
10.94278
10.25261.7519.19.7524822.610.3
125
5.12130
10.94278
10.25261.7519.19.7524822.210.1
1-1/240
8.50216
16.50419
15.503941.5338.9
12.00*30568.731.2
250
8.50216
16.50419
15.503941.5338.9
12.00*30568.831.2
NPSDN
■ Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Stellite Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD Pressure Class
80
Forged "Y" Pattern Repairable Globe Valves
YPA
TT
ER
N G
LO
BE
LTD
CL
AS
S 1
690
(PN
290
)R
151
0, R
151
1, R
152
2
■ Inline Repairable■ Screw Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Stellite Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD Pressure Class
Class 1690 (PN 290)Conventional PortSW: 4225PSI @ 100°F (291.4 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded* Socket Weld*A105 R 1510 SWR 1510
Trim: 13% Cr.Disc/Seat: HF (Solid Stellite Disc)
F11 Cl. 2 R 1511 SWR 1511(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
F22 Cl. 3 R 1522 SWR 1522(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
250
7.50190
17.75451
16.504191.5338.9
12.00*30540.818.5
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
*1-1/2" & 2" sizes have impactor handwheels.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix Z-R.
1/215
5.12130
11.60295
10.97279.7519.19.7524819.68.9
3/420
5.12130
11.60295
10.97279.7519.19.7524819.58.9
125
5.12130
11.60295
10.97279.7519.19.7524819.58.9
1-1/240
7.50190
17.75451
16.504191.5338.9
12.00*30542.019.1
NPSDN
81
Forged "Y" Pattern Globe Valves
YPA
TT
ER
N G
LO
BE
LTD
CL
AS
S 2
680
(PN
460
)25
10, 2
511,
252
2
■ Welded Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Stellite Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD
Pressure Class
Class 2680 (PN 460)Full PortSW: 6700 PSI @ 100°F (462.1 BAR @ 38°C)THD: 6250 PSI @ 100°F (431.0 BAR @ 38°C)*For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded* Socket WeldA105 2510 SW2510
Trim: 13% Cr.Disc/Seat: HF (Solid Stellite Disc)
F11 Cl. 2 2511 SW2511(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
F22 Cl. 3 2522 SW2522(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
Threaded valves limited to Class 2500 Applications under ASME B16.34. See 2500 LTD Class Press/Temp tables, pages 112-115. Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
250
8.25210
16.94430
15.563951.5338.9
12.00*30562.028.1
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
*1-1/2" & 2" sizes have impactor handwheels.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix Z.
1/215
4.001029.062308.56217.5012.77.001789.14.1
3/420
5.12130
11.00279
10.28261.7519.19.7524819.08.6
125
5.12130
11.00279
10.28261.7519.19.7524819.08.6
1-1/240
8.25210
16.94430
15.563951.5338.9
12.00*30565.129.6
NPSDN
82
Forged "Y" Pattern Repairable Globe Valves
YPA
TT
ER
N G
LO
BE
LTD
CL
AS
S 2
680
(PN
460
)R
251
0, R
251
1, R
252
2
Class 2680 (PN 460)Full PortSW: 6700 PSI @ 100°F (462.1 BAR @ 38°C)THD: 6250 PSI @ 100°F (431.0 BAR @ 38°C)For other ratings see pgs. 112-115
SERIES NUMBER
Body/Bonnet Threaded* Socket Weld*A105 R 2510 SWR 2510
Trim: 13% Cr.Disc/Seat: HF (Solid Stellite Disc)
F11, Cl. 2 R 2511 SWR 2511(1-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)
F22, Cl. 3 R 2522 SWR 2522(2-1/4% Cr.) Trim: 13% Cr.
Disc/Seat: HF (Solid Stellite Disc)Threaded valves limited to Class 2500 Applications under ASME B16.34. See 2500 LTD Class Press/Temp tables, pages 112 -115.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
250
8.25208
17.88454
16.504191.5338.9
12.00*30562.528.4
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
*1-1/2" & 2" sizes have impactor handwheels.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix Z-R.
1/215
5.12130
11.60295
10.97279.7519.19.7524819.68.9
3/420
5.12130
11.60295
10.97279.7519.19.7524819.58.9
125
5.12130
11.60295
10.97279.7519.19.7524819.58.9
1-1/240
8.25208
17.88454
16.504191.5338.9
12.00*30562.628.4
NPSDN
■ Inline Repairable■ Screw Bonnet■ Outside Screw & Yoke■ Bolted Gland■ Loose Solid Stellite Disc■ Integral Hard Faced Seat■ ASME B16.34 LTD
Pressure Class
83
Forged Globe Valves – For Air, Water & Oil Service
GL
OB
ET
YP
E 3
000
1331
T, 1
871T
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1-1/432
6.25159
10.062569.44240.9724.67.0017820.79.4
1-1/240
6.75171
10.382649.812491.1930.28.0020328.813.1
3/810
3.1279
6.061545.50140.5012.73.25833.21.5
3/420
4.001027.501907.00178.5614.24.751218.43.8
1/215
3.3886
6.881756.38162.5614.24.001025.12.3
125
5.001278.442147.75197.8120.65.7514612.45.6
1-1/432
6.251599.062308.502161.0626.97.0017819.08.6
1-1/240
6.75171
10.752739.692461.2832.58.0020323.810.8
250
8.25210
11.12282
10.122571.5338.99.7524842.919.5
+ Valves contain TEFLON—maximum temperature 450°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix AA.
DimensionsBold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
3/810
3.1279
6.251595.88149.399.93.25833.21.5
1/215
3.3886
6.811736.50165.399.94.001025.02.3
3/420
4.001028.062057.56192.5012.74.751218.84.0
125
5.001279.122328.69221.7218.35.7514613.05.9
NPSDN
1/48
3.1279
6.251595.88149.399.93.25833.21.5
1/48
3.1279
6.061545.50140.5012.73.25833.21.5
250
8.25210
12.25311
11.502921.4436.69.7524844.320.1
Series 1331TSeries 1871T
■ Screw Bonnet■ Flat Gasket■ Inside Screw Stem■ Loose Plug Type Disc or
Plug Stem✯■ Renewable Seat or
Integral Seat✯
Plug Stem✯
Type 3000 Conventional Port3000 PSI @ 100°F (206.9 BAR @ 38°C)
NON-SHOCK PRESSURETEMPERATURE NOT TO EXCEED 450°F
A105 Body/Bonnet
SERIES NUMBER
Threaded Socket Weld1871T+ SW1871T+Plug Type Disc Trim: 13% Cr. Not recommended for steam service.
1331T✯+ SW1331T✯+Trim: A105
Not recommended for steam or dry gas service.
84
Forged Angle Valves – For Air, Water & Oil Service
AN
GL
E G
LO
BE
TY
PE
300
028
91T
Type 3000 Conventional Port3000 PSI @ 100°F (206.9 BAR @ 38°C)
NON-SHOCK PRESSURETEMPERATURE NOT TO EXCEED 450°F
A105 Body/Bonnet
SERIES NUMBERThreaded Socket Weld2891T+ SW2891T+
Trim: 13% Cr. Not recommended for steam service.
■ Screw Bonnet■ Flat Gasket Joint■ Inside Screw Stem■ Screw Gland■ Loose Plug Type Disc■ Renewable Seat
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
1.8848
6.221585.88149.5012.74.001024.72.1
250
4.12105
10.502679.752481.4436.69.7524835.216.0
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
+Valves contain TEFLON—maximum temperature 450°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix BB.
3/420
2.1956
7.561927.06179.5012.74.751218.03.6
125
2.5064
8.502167.97202.7218.35.7514611.45.2
1-1/432
3.0076
9.222348.53217.9724.67.0017816.57.5
1-1/240
3.3886
10.122579.442401.1930.28.0020325.011.4
NPSDN
85
Forged Globe Valves – For Meter & Gauge Line Service
GL
OB
ET
YP
E 4
000
5843
1T
Type 4000 Conventional Port4000 PSI @ 100°F (275.9 BAR @ 38°C)
NON-SHOCK PRESSURETEMPERATURE NOT TO EXCEED 450°F
A105 Body/Bonnet
SERIES NUMBERThreaded Socket Weld58431T+ SW58431T+
Trim: 13% Cr.
Not recommended for steam or dry gas service.
■ Union Bonnet■ Flat Gasket Joint■ Inside Screw Stem■ Screw Gland■ Needle Point Control■ MSS-SP-99
+Valves contain TEFLON—maximum temperature 450°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix CC.
DimensionsSize
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/48
2.7570
5.341364.97124.317.93.25832.0.90
3/810
2.7570
5.341364.97124.317.93.25831.8.80
1/215
2.7570
5.381375.00127.389.73.25832.91.3
3/420
3.3886
6.881756.25159.5012.74.001025.92.7
125
4.001027.751977.00178.6215.74.751218.84.0
NPSDN
Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
86
Forged Globe & Angle Valves – For Meter & Gauge Line Service
GL
OB
E &
AN
GL
ET
YP
E 5
000
9821
T, 9
841T
, 987
1T
■ Screw Bonnet■ Flat Gasket Joint■ Inside Screw Stem■ Screw Gland■ Needle Point Control■ MSS-SP-99*
Type 5000Conventional Port5000 PSI @ 100°F (344.8 BAR @ 38°C)Temperature not to exceed 450°F
SERIES NUMBERBody/Bonnet Threaded Socket WeldA105 9871T+ SW9871T+
Trim: 13% Cr.
F316/F316L 9821T+ SW9821T+(Sizes 1/4 - 1)Trim: 13% Cr.
Not recommended for steam or dry gas service.
Dimensions
*MSS-SP-99 not applicable for Sizes 1-1/4, 1-1/2 and 2. For Cv factors see Page 123, Valve Matrix CC.
Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
1/48
2.7570
5.311354.97126.317.93.25831.8.82
3/810
2.7570
5.311354.97126.317.93.25831.6.72
1-1/240
6.251599.812498.942271.0025.47.0017819.08.6
+Valves contain TEFLON—maximum temperature 450°F. Refer to pages 116-120 for full materials description.For Cv factors see Page 123, Valve Matrix BB.
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
2.7570
5.251345.00127.389.73.25832.61.9
3/420
3.3886
6.751716.25159.5012.74.001025.02.2
125
4.001027.751977.00178.6215.74.751217.33.4
250
7.75197
11.12282
10.062561.2531.88.0020328.613
NPSDN
1-1/440
4.751219.002298.19208.7519.05.7514613.26.0
Dimensions Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
1/48
1.3835
5.311354.97126.317.93.25831.8.82
3/810
1.3835
5.311354.97126.317.93.25831.6.72
Size
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
1/215
1.3835
5.251345.00127.389.63.25832.51.1
3/420
1.6943
6.751726.25159.5012.74.001024.72.1
125
2.0051
7.751977.00178.6215.94.751216.83.1
NPSDN
■ Screw Bonnet■ Flat Gasket Joint■ Inside Screw Stem■ Screw Gland■ Needle Point Control■ MSS-SP-99
Angle ValveNeedle Point PortA105 Body/Bonnet
SERIES NUMBERThreaded Socket Weld9841T+ SW9841T+
Trim: 13% Cr.Not recommended for steam ordry gas service.
87
Forged Globe Valves – For Air, Water & Oil Service
GL
OB
ET
YP
E 6
000
3991
T
Type 6000 Full Port6000 PSI @ 100°F (413.8 BAR @ 38°C)
NON-SHOCK PRESSURETEMPERATURE NOT TO EXCEED 450°F
A105 Body/Bonnet
SERIES NUMBERThreaded Socket Weld3991T+ SW3991T+
Trim: 13% Cr.
Not recommended for steam service.
■ Screw Bonnet■ Flat Gasket Joint■ Inside Screw Stem■ Screw Gland■ Loose Plug Type Disc■ Renewable Seat
1/215
4.001028.002037.62194.399.94.751219.01.9
+ Valves contain TEFLON—maximum temperature 450°F.Refer to pages 116-120 for full materials description.
For Cv factors see page 123, Valve Matrix AA.
DimensionsSize
A-End-to-End
B-Open
C-Closed
D-Seat Diameter
E-Handwheel Diameter
Weight
3/420
5.001278.692218.25210.5012.75.7514612.65.7
125
6.251599.882519.31236.7218.37.0017821.29.6
1-1/432
6.75171
11.00279
10.44265.9724.68.0020331.114.1
1-1/240
8.25210
12.81325
12.003051.1930.29.7524847.921.7
250
8.50216
12.94329
12.193101.4436.612.0030565.729.8
NPSDN
Bold face numerals are in inches and pounds.Blue numerals are in millimeters and kilograms.
88
Auxiliary Operators
MOTOR OPERATED VALVE
BEVEL GEAR OPERATED VALVE
DIAPHRAGM OPERATED VALVE
The superstructures of Vogt valves
are FORGED RUGGED and lend
themselves to the adaptation of
Auxiliary Operators.
Any of the three types illustrated
can generally be furnished and
requests for quotations are invited.
Auxiliary Operators for Vogt valves
are normally custom mounted in our
plant where limit and torque
switches, as applicable, can be set
and valves tested to users
specifications.
Recommended