View
248
Download
2
Category
Preview:
DESCRIPTION
Enhance Items “ - Change of the start screen and the launcher - Change of the menu for ADMIN level - KX-NCP Quick Setup enhancement - IP-GW Easy Installation by MSPM (Multi-site PBX Manager) - Add IP-PT Registration button in Slot screen - Support the activation keys of CA V2.0 - IP-PT/PS Registration enhancement - NLP Setting of IP Extension card - DN2IP Parameter Change is available in INS status - Extension search function in Extension settings - Add the URL for PBX Web Manager - Change behavior for Saving Profile in Connect screen
Citation preview
Unified PC Maintenance Console
- V4.4 -
Panasonic Communications CO.,LTD.
“Enhance Items
- Change of the start screen and the launcher- Change of the menu for ADMIN level- KX-NCP Quick Setup enhancement- IP-GW Easy Installation by MSPM (Multi-site PBX Manager)- Add IP-PT Registration button in Slot screen- Support the activation keys of CA V2.0- IP-PT/PS Registration enhancement- NLP Setting of IP Extension card- DN2IP Parameter Change is available in INS status- Extension search function in Extension settings- Add the URL for PBX Web Manager- Change behavior for Saving Profile in Connect screen
Change of the start screen and the launcher
“Change of the start screen and the launcher
Add the Demo mode for Multi-site PBX Manager
The new launcher
Change of the menu for ADMIN level
“Change of the menu for ADMIN level
Remove “Tenant No.”, “COS”, “VM Trunk Group No.”
UPCMC shows these menus when ADMIN user logs in.
Remove “Tenant No.”, “VM Trunk Group No.”
KX-NCP Quick Setup enhancement
“KX-NCP Quick Setup enhancementUPCMC V4.4 executes the special settings besides the normal Quick Setup under the following conditions.
[Special Settings]
[Conditions] - PBX : KX-NCP500/NCP1000 - Login mode : ADMIN - One DHLC card is installed
Port Extension No. Name XDP DPT Type
1 2nd + 01 CS Off Normal
2 2nd + 02 CS Off Normal
3 2nd + 03 Fax Off Normal
4 2nd + 04 VM Off VM1-1
2nd Numbering Plan of Extension. If it is 2xx, they are 201 - 204.
IP-GW Easy Installation by MSPM (Multi-site
PBX Manager)
“IP-GW Easy Installation by MSPM - 1
The license of KX-TDA0300 is required.
Master PBX
Branch PBX
Click!
“IP-GW Easy Installation by MSPM - 2
Click!
“IP-GW Easy Installation by MSPM - 3We can modify
DN2IP/GW Settings
Click!
“IP-GW Easy Installation by MSPM - 4
Select the PBX which we want to
copy the settings to.
Click!
“IP-GW Easy Installation by MSPM - 5Executing…
Completed
“IP-GW Easy Installation by MSPM - 6The result after Easy Installation
1. One Virtual IP-GW card is installed automatically.
“IP-GW Easy Installation by MSPM - 72. Trunk group for Virtual IP-GW is 7.
“IP-GW Easy Installation by MSPM - 83. “TIE call by extension numbering” is enabled.
“IP-GW Easy Installation by MSPM - 94. Any TIE making call is routed to trunk group 7 in TIE table.
“IP-GW Easy Installation by MSPM - 105. Any incoming call through Virtual IP-GW is allowed.
“IP-GW Easy Installation by MSPM - 116. 4ch is allowed for Virtual IP-GW card by activation key.
Add IP-PT Registration button in Slot screen
“Add IP-PT Registration button in Slot screen
We can start the window of Port Property - Virtual IP Extension.
Support the activation keys of CA V2.0
“Support the activation keys of CA V2.0
New items
IP-PT/PS Registration enhancement
“IP-PT/PS Registration enhancement - 1Automatic response feature is performed always in PS/IP-EXT registration. Automatic response button was removed.
NextPage
This window appears.
“IP-PT/PS Registration enhancement - 2
NLP Setting of IP Extension card
“NLP setting of IP Extension cardNLP setting of IP extension card is supported. (NLP setting of Virtual IP extension card has already been supported.)
DN2IP Parameter Change is available in INS status
“DN2IP Parameter Change is available in INS enhancementWe can change the parameter about the following items.
Extension search function in Extension settings
“Extension search function in Extension settings
We can search the cell.
Add the URL for PBX Web Manager
“Add the URL for PBX Web Manager
Change behavior for Saving Profile in Connect screen
“Change behavior for Saving Profile in Connect screen
We select the profile and change the setting of Connection Property.
Yes : Save Profile and ConnectNo : Not Save Profile and ConnectCancel : Return to previous Screen
Thank You Very MuchFor Your Attention
“ We are Panasonic Family”
Modification:
Recommended