View
1
Download
0
Category
Preview:
Citation preview
UL Recognized material1.2mm white Polybutylene Terephthalate (PBT) V0 flame rated White colored end caps•
2020 Rev A825Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, 90250 Tel.: 13237792980 Fax.: 13237549060.CASpecifications subject to change without notice. order@fulham.com www.fulham.com
••Mechanical Data
TLEOPT120020LinearHO / LPLinearHO DC Module End CapsTLEHO120020 (End cap for LinearOPT)
VLEOPT120012For use with Fulham’s LinearHO and LPLinearHO DC modules•
Compatible with:TMU125050CL8xxA (22" LinearHO)TMU140055CL8xxB (33" LinearHO) TMU140055CL8xxA (44" LinearHO) TMU240095CL8xxA (44" LinearHO) TMU240095CL8xxC (58" LinearHO)
Page 1 of 1
R 0.716”(18.2mm)
0.236”(6mm) 0.196” (5mm)
+0.30.2 \ CT1.397”(35.5mm)
R0.059”(1.5mm)+0.3 0.2\ CT0.826” (21mm)
VLEHOLinearLP120012 (End cap for OPT)
Compatible with:VMU048012LP8xxA (5.5" Low Profile LinearHO) VMU064025LP8xxA (11" Low Profile LinearHO) VMU080030LP8xxA (22" Low Profile LinearHO) VMU125050LP8xxA (22" Low Profile LinearHO) VMU140055LP8xxB (33” Low Profile LinearHO)VMU140055LP8xxA (44" Low Profile LinearHO) VMU140055LP8xxC (46" Low Profile LinearHO) VMU240095LP8xxA (44" Low Profile LinearHO) VMU240095LP8xxC (58" Low Profile LinearHO)
R 0.703”(17.87mm)
0.275”(7mm) 0.236” (6mm)
+0.30.2 \ CT1.37”(35.04mm)
R0.059”(1.5mm)+0.3 0.2\ CT0.677” (17.2mm)
R2
10
6.2
A
A
17.1
R17.8
7.5
6.5R1.5
34.8
3.5 CTQ1.1 CTQ
201.2
1.2
R0.2
R0.2R0.2
R0.2
0.48 CTQ0.8
2
2
0.8
1.2
1.2 90.5°137°
4.5
1.84.7
SIDE VIEW FRONT VIEWISOMETRIC VIEW
SIDE VIEW FRONT VIEWISOMETRIC VIEW
10\ CT
2.5 11.2
R1.5
3.7+0.1 0.1\ CT
2.5 +0.10.1 \ CT
20.5 1.2
35.5+0.20.2 \ CT
20.8+0.1 0.1\ CT
6 5
R1.5
R18.2
R0.72”(R18.2mm)0.82”(20.8mm)0.20”(5.0mm)0.24”(6.0mm)1.40”(35.5mm) 0.39”(10mm)
0.05”(1.2mm)
0.39”(10mm)0.05”(1.2mm)
R0.70”(R17.9mm)
0.30”(7.5mm)1.38”(35mm)
0.68”(17.2mm)0.26”(6.5mm)
Note: The end caps for LinearHO and LPLinearHO are different, and cannot be replaced with each other. Please use the correct model according to module part numbers.
Recommended