View
3
Download
0
Category
Preview:
Citation preview
Page 1
www.vem-group.com
© All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination.
Use of VEM.eKATv10
The new electronic catalogue – VEM.eKAT v10
Selection tool for electric motors and drive solutions
Edition
09.2015
Page 2 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Content
• Basic concept of catalogue
• Product selection and configuration
• Dynamic generation of operating characteristics
• Dynamic generation of data sheets
• CAD 2D / 3D with CADClick® technology
• Possibility to have a company installation
Page 3 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The basic concept of the new interactive VEM catalogue
General information for the use of the catalogue via internet and intranet:
Browser selection: • Preferably Mozilla Firefox, • Chrome • Use in connection with Internet Explorer might cause problems
Local installation: • Available on USB stick (8 GB) in September 2015 • Start from USB stick is possible • Required disk space for installation on computer approx. 3 GB • Local installation update via internet possible in September 2015
Intranet: The intranet catalogue version 10.. is currently updated daily at 6.00 pm directly from the developers site Internet: Release on 01.09.2015 after end of internal test phase
Page 4 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The basic concept of the new interactive VEM catalogue
Use of mobile technology based on Windows, Android, iOS or Linux The use via intranet/internet is possible with some limitations. When selecting rtf-format the formatting of the document is lost. Forwarding to other users is possible without restrictions. However it is recommended to change to pdf-format. The use of the 3D module requires Java script. This is not possible for these types of system software.
Page 5 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The basic concept of the new interactive VEM catalogue
WEB welcome page of VEMeKAT v10.0
Login, user data or guest login
WEB welcome page with language selection
Homepage
Page 6 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The basic concept of the new interactive VEM catalogue
The new homepage of the electronic catalogue – local installation
Page 7 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Product selection
with two different approaches
Product selection via classic WEB surface
with access to configurator
Product selection with simple graphic tree
structure leading to table selection and detailed
configurator
Procedure:
The basic concept of the new interactive VEM catalogue
Page 8 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Product selection via classic WEB surface
with access to configurator
Transfer to detailed product selection
with hierarchical structure
The basic concept of the new interactive VEM catalogue
Page 9 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Product selection with simple graphic tree
structure leading to table selection and detailed
configurator
Preselection from product groups to motor speed
Selection of output in search results list by double click
Transfer to configurator
The basic concept of the new interactive VEM catalogue
Page 10 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The configurator structure
The product characteristics are listed in option groups. Use of drop-down menus with corresponding icons. Not selected menus are hidden automatically. The basic design of the motor is preselected.
Page 11 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
The configurator structure
Configuration
Commercial and project data
Basic selection
• Basic mechanical design
• Standards and regulations
• Ambient conditions
• Colour system
Electric design
Mechanical design
Mounts and additional accessories
Documentation
Page 12 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Basic selection
The configurator structure
Page 13 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Electrical selection
The configurator structure
Page 14 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Mechanical selection
The configurator structure
Page 15 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Mounts and additional accessories
The configurator structure
Page 16 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Use of configurator when changing from standard design to
design with brake/forced ventilation
1. Many of the motor types can be designed as brake motors or motors with forced ventilation
or brake motors with forced ventilation. Please observe the following:
1.1. Change of „Type definition“ in „Basic mechanical design“
to „Brake motor“
1.2. Selection of required brake manufacturer in „Mounts and additional accessories“,
choice box „Brake“
2. For change of cooling type from self-ventilation to forced ventilation:
2.1 Change of cooling type in „Selection for design-engineering“ / „Cooling system“
from IC 411 to IC 416
2.2 Selection of the required ventilator in „Mounts and additional accessories“,
choice box „Type of external ventilator“
3. For brake motors with forced ventilation
select 1.1, 2.1, 1.2 and 2.2
Page 17 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation
Possibilities of language selection for the generated documents
Output format either RTF or PDF
Page 18 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation
1. RTF/PDF-document, generated dynamically 2. RTF/PDF-document, generated dynamically 3. RTF/PDF-document, generated dynamically 4. PDF-document 5. RTF/PDF-document, generated dynamically
1. RTF/PDF-document, generated dynamically 2. PDF-document 3. 3D-CAD-generator, generated dynamically
3D/2D-file, image file or 3D-PDF
4. PDF-document 5. PDF-document 6. PDF-document 7. PDF-document
Document generation in real time
Page 19 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Dynamically generated data sheets and dimensional sheets
Documentation
Page 20 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation
Generation of characteristics and data file
Page 21 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Supply documentation
Documentation
Multiple choice possible
Page 22 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation
3D-CAD-module made by KIM GmbH, St.Wendel
Output in different
2D- and 3D-CAD-formats,
as image file
or as 3D-PDF-Datei
Data generation with ccDesigner
in cooperation with
Publishing of data with ccPublisher
Currently still requires java assistance by the user terminal!
Page 23 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Important available CAD-formats within 3D-module
Frei CAD-formats
without licence
obligations: SAT
STEP
DWG 3D
DXF 3D
IGES
VRML
HOOPS
Alias/Wavefront OBJ
Stereolithography (STL)
Available
image formats: BMP
JPG
TIFF
Other formats:
3D-PDF
License-based CAD-formats
Software must be available on
the user terminal
to use these formats!
„Export CAD data as file“
„Copy CAD data into system“
Documentation
Page 24 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation
Price information
Output format for printing is
the selected file format
Page 25 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Der Aufbau des Konfigurator Inquiry list (shopping basket)
Documentation
selection for project
list
Page 26 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation selection for inquiry list (shopping basket)
For customer version only inquiry possible
For internal use inquiry/offer is possible
Save project
Load project
New project
only possible if the user is registered.
When using the guest log-in,
these options are not available.
Possibility to change the output format
either RTF or PDF
Page 27 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Documentation selection for inquiry list (shopping basket)
Page 28 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
www.vem-group.com
Installation of electronic catalogue v10
Internet - Start by following link on our web page www.vem-group.com
- PC, smartphone or tablet must have internet access
Direct start from USB stick (only for Windows-PC)
- Catalogue files must be stored in a subdirectory
- slow access because all data is loaded via USB interface
Installation on a Windows-PC
- either use of the included setup programme
or simple copying into a file folder (writing permission!)
- executable under Windows XP up to and including Windows 10
- required free memory approx. 4 GB
- MS WORD should be installed to be able to show rtf-files correctly
Otherwise select pdf-printout
Server-based installation - Start as WEB-server
- Access is possible from all browsers, use of different terminal devices and operating
systems (Windows, Android, IOS, Linux)
Page 29 © All rights reserved for VEM Holding GmbH. VEM Holding GmbH retains sole power of disposal, including all rights relating to copying, transmission and dissemination
VEM motors GmbH Carl-Friedrich-Gauß-Straße 1
38855 Wernigerode
Deutschland
Phone: +49 (0)39 43/68 0
Fax: +49 (0)39 43/68 24 40
Email: motors@vem-group.com
www.vem-group.com
Recommended