View
3
Download
0
Category
Preview:
Citation preview
STYRENE BUTADIENE RUBBERFOR ADHESIVES AND SEALANTS
GroupDynasol
Dynasol Group has over 35 years of experience as a supplier of polymers to the Adhesive & Sealant industry.
We are a Global supplier with a wide portfolio of SBS, SEBS, SSBR and Hot SBR products that are used in applications such as hot melts and solvent borne formulas for building and construction, PSA, non-PSA packaging, specialty labels, automotive sealants andFDA grade food packaging sealants.
Our polymer know-how has positioned Dynasol Group as one of the primary global suppliers of high purity FDA compliant grades of SBS, SEBS and HotSBR products.
These products are produced to meet stringent requirements for purity and sensory factors, including odor and taste performance and are 100% compliant with all REACH requirements with zero levels Nonylphenol-type residuals. The emphasis on purity and quality assures a high standard of performance with clear benefits for all applications with exposureto consumer level users.
Dynasol Group’s global footprint includes manufacturing plants and Technical centers located strategically in China, Europe and North America to supply and support our clients worldwide.
It is our commitment to continue to develop new and improved innovative products designed to enhancethe value and performance of our customer’s products.
For more information about our portfolio please visitdynasolgroup.com
Dynasol Products For Adhesives and Sealants
Hygiene Industry
The hygiene industry is an special segment that demand high quality in their adhesives uses for diaper assembly, elastic attachment and position feminine care to underwear.
Dynasol Group has an excellent portfolio of styrene-butadiene copolymers to meet customer needsand market trends.
Adhesives Requirements
Dynasol recommended grades for the Hygiene Industry
Elastic recovery (A)
High adhesive-cohesive strength (B)
Excellent adhesion to low surface energy (C)
Wide temperature resistance (D)
Regulations compliance for
skin contact (G)
Clear colorLow odor (H)
Capable of be applied at low
temperature (F)
Low melt viscosity (E)
Brand Grade Structure Styrene Content, % TSV, cP MFI,
g/10min A B C D E F G H
Calprene 743X Linear SBS 43 360 ¹ 23 4
Calprene 540 Linear SBS 40 600 ¹ 5.5 5
Calprene 741X Linear SBS 40 500 ¹ 9.5 5
Solprene 4428X Radial SBS 40 430 ¹ 10 5
Excellent Good Regular
1- 25% @ 25°C // 2- 30% @ 25°C // 3- 20% @ 25°C // 4- 200°C/5Kg // 5- 190°C/5Kg // 6- 230°C/2.16Kg
Requirement performance
Condition test
Brand Grade Structure Styrene Content, % TSV, cP MFI,
g/10min A B C D E F G H
Solprene1205 / 1217 Linear SBR 25 40002 --- ---
Calprene H6110 Linear SEBS 32 4703 < 16
CalpreneH6215 Linear SBR 13 15003 ---
Tapes
Tapes is an extensive market segment due to the versatile applications that offer from medical, office to industrial applications. Because of this the adhesives need to meet a series of requirements ofperformance and regulations to ensure good performance.
Dynasol Group provides a product portfolio offering flexibility for adhesives formulations, with a versatile range of adhesives performance because of their unique combination of adhesive and cohesive strength over a broad temperature range. In addition to comply with FDA and European regulations for contact with skin and food.
Adhesives Requirements
Dynasol recommended grades for Tapes
Initial tack Permanent (A)
No residue on substrate (C)
Holding power (B)
Regulations compliance for skin contact (D)
Repositionable (E)
Wide service temperature
range (I)
Reduce volatile organic compound (VOC) emission (H)
Mandrel hold (G)Clear or translucent color (F)
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G H I
Solprene 4301 Linear SBS/SB 33 30001 ---
Solprene 4302 Linear SBS/SB 31 8901 ---
Solprene 411 Radial SBS 30 200001 ---
Solprene 416 Radial SBS 30 22001 ---
1- 25% @ 25°C // 2- 30% @ 25°C // 3- 5.23% @ 25°C // 4- 15% @ 25°C 5- 5% @ 25°C // 6- 10% @ 25°C // 7- 190°C/5Kg // 8- 230°C/2.16Kg 9- 200°C/25°C
Excellent Good RegularRequirement performance
Condition test
Brand Grade Structure Styrene Content, % TSV, cP MFI,
g/10min A B C D E F G H I
Solprene 4428X Radial SBS 40 4301 107
CalpreneH6180X
Linear SEBS 15 --- 108
Solprene1205 / 1217 Linear SBR 25 40002 --- --
Solprene 5170X Hybrid SBC 25 9.23 8.99
Emulprene 1011 HSBR 23.5 3000-40004 --- --
Emulprene 1012 HSBR 23.5 150-3005 --- --
Emulprene1013 HSBR 43.5 550-7506 ---- --
Labels
The label industry requires a great deal of versatility in pressure sensitive adhesives (PSAs) in order to satisfy the broad range of properties required for various products.
Dynasol Group has a product portfolio offering flexibility for adhesives formulations, providing a versatile range of adhesives performance because of their unique combination of adhesive and cohesive strength over a broad temperature range.
Adhesives Requirements
Dynasol recommended grades for Labels
Initial tack (A)
UV, temperature and environmental resistance (C)
Removable or repositionable (D)
Ultimate adhesion (E)
Clear or translucent color (B)
Wide service temperature
range (I)
Clod flow tack at cold or freezing
temperature (H)
Mandrel hold (G)
Meet FDA regulations (F)
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G H I
Calprene H6110 Linear SEBS 32 4701 < 15
Calprene H6120 Linear SEBS 30 19001 15
Calprene H6180X Linear SEBS 15 --- 105
Solprene 4302 Linear SBS/SB 31 8902 ---
Excellent Good Regular
1- 20% @ 25°C // 2- 25% @ 25°C // 3- 30% @ 25°C // 4- 5.23% @ 25°C5- 230°C/2.16Kg // 6- 190°C/5Kg // 7- 200°C/5Kg
Requirement performance
Condition test
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G H I
Solprene 4318 Linear SBS/SB 32 7002 56
Solprene 4428X Radial SBS 40 4302 106
Solprene1205 / 1217 Linear SBR 25 40003 ---
Solprene 5170X Hybrid SBC 25 9.24 8.97
Packaging
Packaging is an industry that is currently growing due to the high demand to buy online and thenew resalable food packaging.
Dynasol Group has the capacity to provide styrene-butadiene copolymers to formulate adhesives thatmust have special characteristics and meet specific requirements.
Adhesives Requirements
Dynasol recommended grades for Packaging
Flexible properties (A)
TemperatureViscosity relationship (B)
Wide service temperature range (C)
Meet FDA regulations (D)
Initial tackResealable (G)
Holding power (F)
Reduce volatile organic compound (VOC) emission (E)
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G
Solprene 4301 Linear SBS/SB 33 30001 ---
Solprene 4318 Linear SBS/SB 32 7001 54
Calprene 540 Linear SBS 40 6001 5.54
Solprene 4428X Radial SBS 40 4301 104
Solprene 416 Radial SBS 30 22001 ---
Excellent Good Regular
1- 25% @ 25°C // 2- 30% @ 25°C // 3- 5.23% @ 25°C4- 190°C/5Kg // 5- 200°C/5Kg
Requirement performance
Condition test
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G
Solprene1205 / 1217 Linear SBR 25 40002 ---
Solprene 5170X Hybrid SBC 25 9.23 8.95
Building & Construction
Adhesives are used in the building and construction industry for automotive, floor, subfloors, walls,ceilings and bookbinding applications.
Dynasol Group offers a wide variety of products that can meet a special customer requirements like high cohesive strength, low viscosity, aggressive adhesion to polyolefins, vinyl, and other low energy films, clarity, UV and environmental resistance, comply with regulatory trends including the capacity of adhesives formulations with low VOC.
Adhesives Requirements
Dynasol recommended grades for the Building & Construction
Holding power (A)
UV, temperature and environmental resistance (B)
Wide service temperature range (C)
Indoor / Outdoor usage (D)
Initial tackPermanent (H)
Flexible (G)
Good extrudability (F)
Low shrinkage (E)
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G H
Calprene 500 Linear SBS 31 5000 ¹ 55
Calprene 501 Linear SBS 30 1100 ¹ ---
Calprene 540 Linear SBS 40 600 ¹ 5.55
Calprene H6110 Linear SEBS 32 4702 < 16
Excellent Good Regular
1- 25% @ 25°C // 2- 20% @ 25°C // 3- 30% @ 25°C // 4- 5.23% @ 25°C5- 10% @ 25°C // 6- 3.68% @ 25°C // 7- 190°C/5Kg // 8- 230°C/2.16Kg 9- 200°C/5Kg
Requirement performance
Condition test
BrandGrade Structure Styrene
Content, % TSV, cP MFI, g/10min A B C D E F G H
Calprene H6120 Linear SEBS 30 19002 16
Calprene H6180X Linear SEBS 15 --- 106
Linear
Solprene 4301 Linear SBS/SB 33 30001 ---
Solprene 411 Radial SBS 30 200001 ---
Solprene 416 Radial SBS 30 22001 ---
Solprene1205 / 1217 Linear SBR 25 40003 --- ---
Solprene 5170X Hybrid SBC 25 9.24 8.99
Emulprene 1013 HSBR 43.5 500-6005 ---
Emulprene 1009LF Cross-linkedHSBR 23.5 120-4006 ---
Products for Adhesives & Sealants
0
1
2
3
4
5
6
7
0 1 2 3 4 5 6
S-1205
S-4318S-4302
C-H6110
C-H6120
C-500 C-540
C-743X
S-4428X
S-416S-411
S-4301SSBR
Linear SBS
Linear SBS/Diblock SB
Radial SBS
Linear SEBS
ADHESION
STRENGHT
C O H E S I O N S T R E N G H T
V I S CO S I T Y
C-H6180X
C-H6215Dyne 145B
Solution Technology Products
Emulsion Technology Products
0
1
2
3
4
5
6
7
0 1 2 3 4 5 6
E-1012
Non Cross-linked HSBR
ADHESION
STRENGHT
C O H E S I O N S T R E N G H T
Cross-linked HSBR
E-1011
E-1013
E-1006
E-1009
V I S CO S I T Y
Dynasol Technical Experience
Dynasol Group is committed to supporting its customers with the dynamism demanded by the market challenges of Adhesives & Sealants having an expert R&D department with the aim of maintaining the technological vanguard in the development of styrene-butadiene copolymers
Having two laboratories specializing in adhesives and sealants with global technical attention, one in Mexico and one in Spain, with technical staff dedicated to the development of new applications and provide assistance adhesive formulators in a quick and timely manner for the selection of raw materials and provide support for the development of applications.
Technical Capability
The global presence of Dynasol Group allows us to be aware of the importance of being in tune with the ever-changing regulations around theworld.
The products manufactured in all our sites are listed without ban in many of the chemical inventories in North and Latin America, Europe, Asia and Oceania, and comply with European and Chinese regulations for food contact, FDA standards for food contact materials, do not contain any substance included in the REACH SVHC candidate list or Annex XVII.
Regulatory Guidance
For further inquiries on regulations please contact marketing@dynasol.com
Dynasol Group. Houston
14340 Torrey Chase Blvd. Suite 365Houston, TX 77014
Phone: (281) 874 08 88Tool Free: 1 877 559 75 68
Fax: (281) 885 17 42
Dynasol Group. Madrid
C/Titán 15, 9th Floor28045. Madrid, Spain
Phone: (34) 91 753 09 38Fax: (34) 91 323 83 52
marketing@dynasol.com
dynasolgroup.com
Recommended