StranDNA (UK) Limited Installation Guidelines. Agenda Housekeeping Current Conventional Chain ...

StranDNA (UK) Limited

Installation Guidelines

Agenda

Housekeeping Current Conventional Chain Solution: Chain Reaction DNA Benefits Installation Guidelines Paperwork Questions and Answers Test

Current Conventional Chain

Entry Forced

Current Conventional Chain

Solution

Chain Reaction DNA

Examples of Installations

Can be fitted either to left or right opening doors.

Installations

Composite Doors

Wood

UPVC

Choice of Brass or Chrome Fittings

Choice of Non DNA (Silver Can) andDNA Trace (Gold Can)

Installations

ChAin ReAction DNA

• Designed to ease the fear associated with doorstep crimes.

• DNA Trace Technology – unique DNA code for each can.

• Robust security chain with high decibel alarm .• Easy Installation and simple to use.• ‘Sold Secure’ Accreditation by The Locksmiths Assoc.• Manufactured in association with ERA Security.

Benefits

DNA Trace Under UV Light

Under Normal Light conditions

Under Ultra Violet light

DNA Trace – Useful information• No DNA Trace code is the same. There are billions of

different codes available for the DNA substance. So many, that for every person in the world there are ten codes available to them.

• When it’s installed, the unique DNA Trace code is registered to that specific entrance.  The DNA substance and UV marker can stay on the person and clothing for up three months. (Dependant and washing and exfoliation)

• It is totally safe and non-toxic.• UV Suites are being installed in more police stations across

the UK and police are now being issued with UV torches to use on their beat to detect UV traces.

• If the device is deployed and the burglar apprehended, this evidence can assist the Police in securing a conviction.

Installation Guidelines

Installation Pack

• DNA Trace Alarm.• Security Chain.• Canister Housing.• Cover.• Screws and Fixings (for UPVC

and Wood)• Blanking Plate. • Security Screws.• Installation Paperwork.• Warning Stickers.• Job sheet.• Return envelope.

Tools Required

• Drill (Battery or Electric) with 3mm Drill Bit.

• Permanent Marker (Sharpie).• Torx T10 screwdriver (Security Type)• Pencil.• Phillips Screwdriver.

Step 1. Complete a full survey of where you intend to install the unit, both on the door and frame. Make sure that it does not obstruct any hidden levers. The unit needs to installed be between 1100 mm from the bottom of the unit and 1500mm from the top of the unit. Take into consideration the level of the spray exit and height of the main user.Step 2.Measure up and mark up holes on the wall.

3. Carefully drill the holes for the casing.

4. Install the screws supplied in the top 4 holes only.

* With a UPVC frame, install the UPVC fixings first. (Drill holes for those sizes if necessary)

5. Fix the chain in the bottom section of casing using the larger screws supplied

6. Before installing the canister, Check that the DNA code sticker in the white cap, on the DNA TRACE canister, is the same as the one on the can. Apply this sticker to the Job sheet at this pint.Remove the white spacer from the canister.

7. Apply the siren to the canister. **Take care not to push it on too hard as this may set off the canister.

8. Install the canister facing the door.

Write your fitter I.D. number and date on the anti-tamper label with a permanent marker.

9. Apply the anti-tamper sticker, taking care not to remove the centre part as this will stop the deployment of the alarm, DNA TRACE system.

Install the blanking plate on the opposite side of the casing to the opening of the siren.

10. Install the cover carefully.

Install the anti-tamper screws at the base of the cover.

11. Install the clasp as shown in line with the base of the main unit, and 10mm from the edge of the door.

11. Fix the clasp with the screws supplied.

12. Apply the 2 stickers. Install one near front door/window and one to affix at rear of the property.Make sure this is visible as a good deterrent.

Fill in the paperwork.This is the single most important partof the installation.

The Jobsheet MUST be fully completedwith DNA code sticker affixed and CJD completed and signed.The address and DNA code details MUSTbe rung through to StranDNA at the timeof installation completion.We will issue you with a reference number to be written in the top right of the job sheet.This is a registration document and job sheet combined.Once completed correctly, it is a Legal document that removes the need for the you to attend court should you be called as a witness as the installer of the device.The Jobsheet MUST be returned to StranDNA within 48 hours in the envelope provided

Finally…the most important part…..

StranDNA (UK) Limited

CHAIN REACTIOn DNAA Crime REDUCTIOn Product