SONO-VARIO Installation Images - Amazon S3 · MESA Systems Co. 8 Broad Street, Unit 1, Stonington,...

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

1

SONO-VARIO Installation Images

Last Updated: June 6, 2018

Purpose: This document shows successful installations for the SONO-VARIO probe below clam-

gates. This type of installation is recommended for sand, gravel, and crushed stone.

Above: SONO-VARIO Sensor (Item #: 308074) and Mounting Plate (Item #:308078)

Above: SONO-VARIO cable (Item #: 308029) and SONO-VIEW (Item #: 300131)

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

2

Above Image: SONO VARIO probe with mounting bracket with cable protected by semi-ridged flex

conduit.

Note: The probe can be adjusted in and out as with the pitch of the probe plate to assure the material

flows over the probe’s face for optimal readings.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

3

Above Image: Front view of a SONO-VARIO probe.

Note: The probe should be pitched at 45° to 50° for sand. The sand should fall directly on the

rectangular plate in the center of the sensor. For gravel a pitch of 55° to 70°. Refer to the technical

manual for important details.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

4

Above: Front view of a SONO VARIO probe, Below: Side view of a SONO VARIO probe

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

5

Above Image: View of a SONO VARIO probe mounted in a customer designed bracket.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

6

Above Image: Two (2) SONO VARIO sensors mounted below a clam-gate above a conveyor. The

probe on the right is measuring sand. The probe on the left is measuring 1” stone.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

7

Above Image: A SONO VARIO Xtrem probe mounted blow a clam-gate above a conveyor

measuring 1” stone moisture.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

8

Above Image: A SONO VARIO Xtrem probe mounted blow a clam-gate measuring stone.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

9

Above Image: A SONO VARIO Xtrem probe mounted blow a clam-gate measuring sand.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

10

Above Image: Three SONO VARIO Xtrem probes mounted blow a clam-gate measuring natural

sand and two different stones.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

11

Above Image: A SONO VARIO Xtrem probe mounted blow a clam-gate measuring natural sand.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

12

Above Image: Four SONO VARIO Xtrem probes mounted blow a clam-gate measuring natural sand,

57stone, 89stone amd screenings.

MESA Systems Co. 8 Broad Street, Unit 1, Stonington, CT 06378 Phone: 508-655-6372 support@mesasystemsco.com www.mesasystemsco.com

13

Above Image: A SONO VARIO Xtrem probe mounted blow a clam-gate measuring natural sand.