View
17
Download
0
Category
Preview:
Citation preview
SEMI-AUTONOMOUSBMM DETECTOR
FLIGHT-ENABLED DETECTOR (FED)
The FED is a UAV based BMM detector. It flies semi-autonomous missions to detect Blast Movement Monitors (BMMs) in the muck pile (post-blast) and simultaneously records their depth and high precision GPS coordinates.
15 kg
75.9 x 166.8 x 151.8 cm
55 kg(without batteries)
80 (L) x 80 (W) x 87 (H)cm
-10 … +40 °C
8 m/s (15.5 knots)
Class 1M Laser Device
Assembled weight
Dimensions (unfolded)
Shipping weight(including case)
Shipping case size
Operating temperature
Max operating wind speed
Collision Detection System
Trimble Survey Grade GNSS Receiver(Compatible with Trimble and Leica base stations)
Lithium-ion Polymer 4500mAh,99.9 Wh (per battery)
6 batteries per set
Bluetooth and 2.4GHz Wi-Fi5.725 GHz to 5.825 GHz2.400 GHz to 2.483 GHz
300mm while travelling at 2m/s
8 meters(from the bottom of the coil)
GNSS receiver model
Battery
Transmission frequencies
BMM Detection Accuracy
BMM Detection
DJI M600 Pro Airframe
Built-in GNSS receiver
Vertical (downward) and horizontal (forward) collision detection systems
Automated flight controland customizable flight plan
Capable of detecting up to 3 BMMs on one battery set
Returns home on 25%battery and once the batteries are replaced it can resume the mission from the point where it was suspended
Seamless integration with current BMT system
Recommended