View
2
Download
0
Category
Preview:
Citation preview
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Typical Entry Level Counting Line Configuration:
Rate ~20 bpm (60 Count) Rough Dimensions 45’ X 7’ Unscrambler Manually Load/Lazy Susan<60 bpm Conveyor Section #1 >60 bpm Counter > 20 bpm
(Current Configuration Constraint) Metal Detector 100 bpm Rejecter >100 bpm Accumulation Table (for Rejecter) >60 bpm Conveyor Section #2 >60 bpm Cottoner or Desiccant Inserter Cottoner>40 or Desiccant >60 Capper >60 bpm Conveyor Section #3(for Neck Band Sealer) >60 Neck Band Applicator >60 bpm Shrink Tunnel >60 bpm
Accumulation Table#2 >60 bpm
Included Items • Engineering • Control Panels • Shipping • Pacing Wheels
Options:
• Check Weigher • Cocked/Missing Cap Detector • Induction Sealer • Hugger Belts • Printer (CIJ) with required Hugger Belt #2 • Jar/Bottle Labeler • Vision System
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Our Entry Level Counting Line is designed to run at ~20 bpm (60 count) Greater speeds are achivable with key equipment substitutions. Capable of counting a variety of products
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Typical Mid Level Counting Line Configuration;
RATE 50-60 BPM (60 COUNT) Rough Dimension 56’ x 7’ Unscrambler <120 bpm Conveyor Section #1 150+ bpm Pacing Wheel 150+ Counter 100 bpm Hugger Belt #1 150+ bpm Metal Detector <150 bpm Check Weigher <150 bpm Rejecter <150 bpm Accumulation Table #1 For Rejecter 150+ bpm Conveyor Section #2 150+ bpm Cottoner or Desiccant Inserter Cottoner <100 Desiccant <150 Capper <150 bpm
Induction Sealer <150 bpm
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Our Mid Level Counting Line is designed to run at ~40-60 bpm (60 count) Greater speeds are achivable with key equipment substitutions. Capable of counting a variety of products
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Typical High Speed Counting Line Configuration:
RATE 100-110 BPM (60 COUNT) Rough Dimension 63’ x 7.5’ Unscrambler w/Air Rinse <120 bpm Conveyor Section #1 150+ bpm Pacing Wheel Included Counter 200 bpm Hugger Belt 150+ bpm Metal Detector <150 bpm Check Weigher <150 bpm Rejecter <150 bpm Accumulation Table #1 For Rejecter 150+ bpm Conveyor Section #2 150+ bpm Cottoner or Desiccant Inserter Cottoner <100 Desiccant <150 Capper <150 bpm Induction Sealer <150 bpm Conveyor Section #3 For Neck Band Sealer 150+ Neck Band Applicator <100 bpm Shrink tunnel <150 bpm Printer (CIJ) Expiry Date & Lot No. 150+ bpm Hugger Belt #2 for Printer 150+ bpm Labeler <125 bpm Accumulation Table #2 For Finished Bottles 150+ bpm
Right Stuff Equipment
1605 E 69th Ave. Denver, CO 80229 Phone: 303-327-4704 Fax: 303-327-4708
“Engineering Solutions for Manufacturers” www.rightstuffequipment.com
[Type here]
Our High Speed Counting Line is designed to run at ~100-110 bpm (60 count)
Capable of counting a variety of products
Recommended